From 2474ed444b475614ef795523076be7cc8437ae00 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 19 Mar 2006 12:35:57 -0300 Subject: V4L/DVB (3582): Implement correct msp3400 input/output routing - implement VIDIOC_INT_S_AUDIO_ROUTING for msp3400 and tvaudio - use the new command in bttv, pvrusb2 and em28xx. - remove the now obsolete MSP_SET_MATRIX from msp3400 (yeah!) - remove the obsolete VIDIOC_S_AUDIO from msp3400. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/bt8xx/bttv-driver.c | 52 +++++++++++--- drivers/media/video/em28xx/em28xx-cards.c | 8 ++- drivers/media/video/em28xx/em28xx-video.c | 8 ++- drivers/media/video/msp3400-driver.c | 67 +++++++++--------- drivers/media/video/msp3400-driver.h | 4 +- drivers/media/video/msp3400-kthreads.c | 111 ++++++++++++++++-------------- drivers/media/video/tvaudio.c | 24 +++++++ drivers/media/video/v4l2-common.c | 13 +--- 8 files changed, 176 insertions(+), 111 deletions(-) (limited to 'drivers/media') diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index be567ec9e145..80e4a7406ac2 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -37,6 +37,7 @@ #include "bttvp.h" #include #include +#include #include @@ -934,11 +935,9 @@ static int audio_mux(struct bttv *btv, int input, int mute) { int gpio_val, signal; - struct v4l2_audio aud_input; struct v4l2_control ctrl; struct i2c_client *c; - memset(&aud_input, 0, sizeof(aud_input)); gpio_inout(bttv_tvcards[btv->c.type].gpiomask, bttv_tvcards[btv->c.type].gpiomask); signal = btread(BT848_DSTATUS) & BT848_DSTATUS_HLOC; @@ -953,7 +952,6 @@ audio_mux(struct bttv *btv, int input, int mute) gpio_val = bttv_tvcards[btv->c.type].gpiomute; else gpio_val = bttv_tvcards[btv->c.type].gpiomux[input]; - aud_input.index = btv->audio; gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpio_val); if (bttv_gpio) @@ -962,15 +960,51 @@ audio_mux(struct bttv *btv, int input, int mute) return 0; ctrl.id = V4L2_CID_AUDIO_MUTE; - /* take automute into account, just btv->mute is not enough */ - ctrl.value = mute; + ctrl.value = btv->mute; bttv_call_i2c_clients(btv, VIDIOC_S_CTRL, &ctrl); c = btv->i2c_msp34xx_client; - if (c) - c->driver->command(c, VIDIOC_S_AUDIO, &aud_input); + if (c) { + struct v4l2_routing route; + + /* Note: the inputs tuner/radio/extern/intern are translated + to msp routings. This assumes common behavior for all msp3400 + based TV cards. When this assumption fails, then the + specific MSP routing must be added to the card table. + For now this is sufficient. */ + switch (input) { + case TVAUDIO_INPUT_RADIO: + route.input = MSP_INPUT(MSP_IN_SCART_2, MSP_IN_TUNER_1, + MSP_DSP_OUT_SCART, MSP_DSP_OUT_SCART); + break; + case TVAUDIO_INPUT_EXTERN: + route.input = MSP_INPUT(MSP_IN_SCART_1, MSP_IN_TUNER_1, + MSP_DSP_OUT_SCART, MSP_DSP_OUT_SCART); + break; + case TVAUDIO_INPUT_INTERN: + /* Yes, this is the same input as for RADIO. I doubt + if this is ever used. The only board with an INTERN + input is the BTTV_BOARD_AVERMEDIA98. I wonder how + that was tested. My guess is that the whole INTERN + input does not work. */ + route.input = MSP_INPUT(MSP_IN_SCART_2, MSP_IN_TUNER_1, + MSP_DSP_OUT_SCART, MSP_DSP_OUT_SCART); + break; + case TVAUDIO_INPUT_TUNER: + default: + route.input = MSP_INPUT_DEFAULT; + break; + } + route.output = MSP_OUTPUT_DEFAULT; + c->driver->command(c, VIDIOC_INT_S_AUDIO_ROUTING, &route); + } c = btv->i2c_tvaudio_client; - if (c) - c->driver->command(c, VIDIOC_S_AUDIO, &aud_input); + if (c) { + struct v4l2_routing route; + + route.input = input; + route.output = 0; + c->driver->command(c, VIDIOC_INT_S_AUDIO_ROUTING, &route); + } return 0; } diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 2d68a27417eb..f62fd706b45a 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -28,8 +28,9 @@ #include #include #include -#include +#include #include +#include #include #include "em28xx.h" @@ -146,11 +147,12 @@ struct em28xx_board em28xx_boards[] = { .input = {{ .type = EM28XX_VMUX_TELEVISION, .vmux = 0, - .amux = 6, + .amux = MSP_INPUT_DEFAULT, },{ .type = EM28XX_VMUX_SVIDEO, .vmux = 2, - .amux = 1, + .amux = MSP_INPUT(MSP_IN_SCART_1, MSP_IN_TUNER_1, + MSP_DSP_OUT_SCART, MSP_DSP_OUT_SCART), }}, }, [EM2820_BOARD_MSI_VOX_USB_2] = { diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 780342f7b239..dfba33d0fa61 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -38,6 +38,7 @@ #include "em28xx.h" #include #include +#include #define DRIVER_AUTHOR "Ludovico Cavedon , " \ "Markus Rechberger , " \ @@ -216,9 +217,14 @@ static void video_mux(struct em28xx *dev, int index) em28xx_videodbg("Setting input index=%d, vmux=%d, amux=%d\n",index,input,dev->ctl_ainput); if (dev->has_msp34xx) { + struct v4l2_routing route; + if (dev->i2s_speed) em28xx_i2c_call_clients(dev, VIDIOC_INT_I2S_CLOCK_FREQ, &dev->i2s_speed); - em28xx_i2c_call_clients(dev, VIDIOC_S_AUDIO, &dev->ctl_ainput); + route.input = dev->ctl_ainput; + route.output = MSP_OUTPUT(MSP_OUT_SCART1_DA); + /* Note: this is msp3400 specific */ + em28xx_i2c_call_clients(dev, VIDIOC_INT_S_AUDIO_ROUTING, &route); ainput = EM28XX_AUDIO_SRC_TUNER; em28xx_audio_source(dev, ainput); } else { diff --git a/drivers/media/video/msp3400-driver.c b/drivers/media/video/msp3400-driver.c index 04250284ff1e..8ba1c960388a 100644 --- a/drivers/media/video/msp3400-driver.c +++ b/drivers/media/video/msp3400-driver.c @@ -555,7 +555,6 @@ static int msp_set_ctrl(struct i2c_client *client, struct v4l2_control *ctrl) static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg) { struct msp_state *state = i2c_get_clientdata(client); - int scart = -1; if (msp_debug >= 2) v4l_i2c_print_ioctl(client, cmd); @@ -660,15 +659,6 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg) break; } - /* msp34xx specific */ - case MSP_SET_MATRIX: - { - struct msp_matrix *mspm = arg; - - msp_set_scart(client, mspm->input - 1, mspm->output); - break; - } - /* --- v4l2 ioctls --- */ case VIDIOC_S_STD: { @@ -682,36 +672,38 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg) return 0; } - case VIDIOC_S_AUDIO: + case VIDIOC_INT_G_AUDIO_ROUTING: { - struct v4l2_audio *sarg = arg; + struct v4l2_routing *rt = arg; - switch (sarg->index) { - case TVAUDIO_INPUT_RADIO: - /* Hauppauge uses IN2 for the radio */ - state->mode = MSP_MODE_FM_RADIO; - scart = SCART_IN2; - break; - case TVAUDIO_INPUT_EXTERN: - /* IN1 is often used for external input ... */ - state->mode = MSP_MODE_EXTERN; - scart = SCART_IN1; - break; - case TVAUDIO_INPUT_INTERN: - /* ... sometimes it is IN2 through ;) */ - state->mode = MSP_MODE_EXTERN; - scart = SCART_IN2; - break; - case TVAUDIO_INPUT_TUNER: - state->mode = -1; - break; - } - if (scart >= 0) { - state->rxsubchans = V4L2_TUNER_SUB_STEREO; - msp_set_scart(client, scart, 0); + *rt = state->routing; + break; + } + + case VIDIOC_INT_S_AUDIO_ROUTING: + { + struct v4l2_routing *rt = arg; + int tuner = (rt->input >> 3) & 1; + int old_tuner = (state->routing.input >> 3) & 1; + int sc_in = rt->input & 0x7; + int sc1_out = rt->output & 0xf; + int sc2_out = (rt->output >> 4) & 0xf; + u16 val; + + state->routing = *rt; + if (state->opmode == OPMODE_AUTOSELECT) { + val = msp_read_dem(client, 0x30) & ~0x100; + msp_write_dem(client, 0x30, val | (tuner ? 0x100 : 0)); + } else { + val = msp_read_dem(client, 0xbb) & ~0x100; + msp_write_dem(client, 0xbb, val | (tuner ? 0x100 : 0)); } + msp_set_scart(client, sc_in, 0); + msp_set_scart(client, sc1_out, 1); + msp_set_scart(client, sc2_out, 2); msp_set_audmode(client); - msp_wake_thread(client); + if (tuner != old_tuner) + msp_wake_thread(client); break; } @@ -941,6 +933,9 @@ static int msp_attach(struct i2c_adapter *adapter, int address, int kind) state->muted = 0; state->i2s_mode = 0; init_waitqueue_head(&state->wq); + /* These are the reset input/output positions */ + state->routing.input = MSP_INPUT_DEFAULT; + state->routing.output = MSP_OUTPUT_DEFAULT; state->rev1 = msp_read_dsp(client, 0x1e); if (state->rev1 != -1) diff --git a/drivers/media/video/msp3400-driver.h b/drivers/media/video/msp3400-driver.h index 04821ebfe04a..1940748bb633 100644 --- a/drivers/media/video/msp3400-driver.h +++ b/drivers/media/video/msp3400-driver.h @@ -4,6 +4,8 @@ #ifndef MSP3400_DRIVER_H #define MSP3400_DRIVER_H +#include + /* ---------------------------------------------------------------------- */ /* This macro is allowed for *constants* only, gcc must calculate it @@ -72,7 +74,7 @@ struct msp_state { int i2s_mode; int main, second; /* sound carrier */ int input; - int source; /* see msp34xxg_set_source */ + struct v4l2_routing routing; /* v4l2 */ int audmode; diff --git a/drivers/media/video/msp3400-kthreads.c b/drivers/media/video/msp3400-kthreads.c index 9ee8dc216d7f..1c794c3b9f21 100644 --- a/drivers/media/video/msp3400-kthreads.c +++ b/drivers/media/video/msp3400-kthreads.c @@ -187,13 +187,14 @@ void msp3400c_set_mode(struct i2c_client *client, int mode) { struct msp_state *state = i2c_get_clientdata(client); struct msp3400c_init_data_dem *data = &msp3400c_init_data[mode]; + int tuner = (state->routing.input >> 3) & 1; int i; v4l_dbg(1, msp_debug, client, "set_mode: %d\n", mode); state->mode = mode; state->rxsubchans = V4L2_TUNER_SUB_MONO; - msp_write_dem(client, 0x00bb, data->ad_cv); + msp_write_dem(client, 0x00bb, data->ad_cv | (tuner ? 0x100 : 0)); for (i = 5; i >= 0; i--) /* fir 1 */ msp_write_dem(client, 0x0001, data->fir1[i]); @@ -783,34 +784,6 @@ int msp3410d_thread(void *data) * struct msp: only norm, acb and source are really used in this mode */ -/* set the same 'source' for the loudspeaker, scart and quasi-peak detector - * the value for source is the same as bit 15:8 of DSP registers 0x08, - * 0x0a and 0x0c: 0=mono, 1=stereo or A|B, 2=SCART, 3=stereo or A, 4=stereo or B - */ -static void msp34xxg_set_source(struct i2c_client *client, int source) -{ - struct msp_state *state = i2c_get_clientdata(client); - - /* fix matrix mode to stereo and let the msp choose what - * to output according to 'source', as recommended - * for MONO (source==0) downmixing set bit[7:0] to 0x30 - */ - int value = (source & 0x07) << 8 | (source == 0 ? 0x30 : 0x20); - - v4l_dbg(1, msp_debug, client, "set source to %d (0x%x)\n", source, value); - msp_set_source(client, value); - /* - * set identification threshold. Personally, I - * I set it to a higher value that the default - * of 0x190 to ignore noisy stereo signals. - * this needs tuning. (recommended range 0x00a0-0x03c0) - * 0x7f0 = forced mono mode - */ - /* a2 threshold for stereo/bilingual */ - msp_write_dem(client, 0x22, msp_stereo_thresh); - state->source = source; -} - static int msp34xxg_modus(struct i2c_client *client) { struct msp_state *state = i2c_get_clientdata(client); @@ -843,10 +816,65 @@ static int msp34xxg_modus(struct i2c_client *client) return 0x0001; } +static void msp34xxg_set_source(struct i2c_client *client, u16 reg, int in) + { + struct msp_state *state = i2c_get_clientdata(client); + int source, matrix; + + switch (state->audmode) { + case V4L2_TUNER_MODE_MONO: + source = 0; /* mono only */ + matrix = 0x30; + break; + case V4L2_TUNER_MODE_LANG1: + source = 3; /* stereo or A */ + matrix = 0x00; + break; + case V4L2_TUNER_MODE_LANG2: + source = 4; /* stereo or B */ + matrix = 0x10; + break; + case V4L2_TUNER_MODE_STEREO: + default: + source = 1; /* stereo or A|B */ + matrix = 0x20; + break; + } + + if (in == MSP_DSP_OUT_TUNER) + source = (source << 8) | 0x20; + /* the msp34x2g puts the MAIN_AVC, MAIN and AUX sources in 12, 13, 14 + instead of 11, 12, 13. So we add one for that msp version. */ + else if (in >= MSP_DSP_OUT_MAIN_AVC && state->has_dolby_pro_logic) + source = ((in + 1) << 8) | matrix; + else + source = (in << 8) | matrix; + + v4l_dbg(1, msp_debug, client, "set source to %d (0x%x) for output %02x\n", + in, source, reg); + msp_write_dsp(client, reg, source); +} + +static void msp34xxg_set_sources(struct i2c_client *client) +{ + struct msp_state *state = i2c_get_clientdata(client); + u32 in = state->routing.input; + + msp34xxg_set_source(client, 0x0008, (in >> 4) & 0xf); + /* quasi-peak detector is set to same input as the loudspeaker (MAIN) */ + msp34xxg_set_source(client, 0x000c, (in >> 4) & 0xf); + msp34xxg_set_source(client, 0x0009, (in >> 8) & 0xf); + msp34xxg_set_source(client, 0x000a, (in >> 12) & 0xf); + if (state->has_scart23_in_scart2_out) + msp34xxg_set_source(client, 0x0041, (in >> 16) & 0xf); + msp34xxg_set_source(client, 0x000b, (in >> 20) & 0xf); +} + /* (re-)initialize the msp34xxg */ static void msp34xxg_reset(struct i2c_client *client) { struct msp_state *state = i2c_get_clientdata(client); + int tuner = (state->routing.input >> 3) & 1; int modus; /* initialize std to 1 (autodetect) to signal that no standard is @@ -864,11 +892,12 @@ static void msp34xxg_reset(struct i2c_client *client) /* step-by-step initialisation, as described in the manual */ modus = msp34xxg_modus(client); + modus |= tuner ? 0x100 : 0; msp_write_dem(client, 0x30, modus); /* write the dsps that may have an influence on standard/audio autodetection right now */ - msp34xxg_set_source(client, state->source); + msp34xxg_set_sources(client); msp_write_dsp(client, 0x0d, 0x1900); /* scart */ msp_write_dsp(client, 0x0e, 0x3000); /* FM */ @@ -896,7 +925,6 @@ int msp34xxg_thread(void *data) v4l_dbg(1, msp_debug, client, "msp34xxg daemon started\n"); - state->source = 1; /* default */ for (;;) { v4l_dbg(2, msp_debug, client, "msp34xxg thread: sleep\n"); msp_sleep(state, -1); @@ -993,7 +1021,6 @@ static int msp34xxg_detect_stereo(struct i2c_client *client) static void msp34xxg_set_audmode(struct i2c_client *client) { struct msp_state *state = i2c_get_clientdata(client); - int source; if (state->std == 0x20) { if ((state->rxsubchans & V4L2_TUNER_SUB_SAP) && @@ -1005,25 +1032,7 @@ static void msp34xxg_set_audmode(struct i2c_client *client) } } - switch (state->audmode) { - case V4L2_TUNER_MODE_MONO: - source = 0; /* mono only */ - break; - case V4L2_TUNER_MODE_STEREO: - source = 1; /* stereo or A|B, see comment in msp34xxg_get_v4l2_stereo() */ - /* problem: that could also mean 2 (scart input) */ - break; - case V4L2_TUNER_MODE_LANG1: - source = 3; /* stereo or A */ - break; - case V4L2_TUNER_MODE_LANG2: - source = 4; /* stereo or B */ - break; - default: - source = 1; - break; - } - msp34xxg_set_source(client, source); + msp34xxg_set_sources(client); } void msp_set_audmode(struct i2c_client *client) diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index 15fd55ff69ca..4e6d030d83c0 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -1682,6 +1682,30 @@ static int chip_command(struct i2c_client *client, case VIDIOC_S_CTRL: return tvaudio_set_ctrl(chip, arg); + case VIDIOC_INT_G_AUDIO_ROUTING: + { + struct v4l2_routing *rt = arg; + + rt->input = chip->input; + rt->output = 0; + break; + } + + case VIDIOC_INT_S_AUDIO_ROUTING: + { + struct v4l2_routing *rt = arg; + + if (!(desc->flags & CHIP_HAS_INPUTSEL) || rt->input >= 4) + return -EINVAL; + /* There are four inputs: tuner, radio, extern and intern. */ + chip->input = rt->input; + if (chip->muted) + break; + chip_write_masked(chip, desc->inputreg, + desc->inputmap[chip->input], desc->inputmask); + break; + } + case VIDIOC_S_AUDIO: { struct v4l2_audio *sarg = arg; diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c index d1234d781e16..6824ee045fe6 100644 --- a/drivers/media/video/v4l2-common.c +++ b/drivers/media/video/v4l2-common.c @@ -312,7 +312,6 @@ static const char *v4l2_int_ioctls[] = { [_IOC_NR(DECODER_DUMP)] = "DECODER_DUMP", #endif [_IOC_NR(AUDC_SET_RADIO)] = "AUDC_SET_RADIO", - [_IOC_NR(MSP_SET_MATRIX)] = "MSP_SET_MATRIX", [_IOC_NR(TUNER_SET_TYPE_ADDR)] = "TUNER_SET_TYPE_ADDR", [_IOC_NR(TUNER_SET_STANDBY)] = "TUNER_SET_STANDBY", @@ -431,12 +430,6 @@ void v4l_printk_ioctl_arg(char *s,unsigned int cmd, void *arg) printk ("%s: value=%d\n", s, *p); break; } - case MSP_SET_MATRIX: - { - struct msp_matrix *p=arg; - printk ("%s: input=%d, output=%d\n", s, p->input, p->output); - break; - } case VIDIOC_G_AUDIO: case VIDIOC_S_AUDIO: case VIDIOC_ENUMAUDIO: @@ -465,7 +458,7 @@ void v4l_printk_ioctl_arg(char *s,unsigned int cmd, void *arg) struct v4l2_buffer *p=arg; struct v4l2_timecode *tc=&p->timecode; printk ("%s: %02ld:%02d:%02d.%08ld index=%d, type=%s, " - "bytesused=%d, flags=0x%08d, " + "bytesused=%d, flags=0x%08x, " "field=%0d, sequence=%d, memory=%s, offset/userptr=0x%08lx\n", s, (p->timestamp.tv_sec/3600), @@ -479,7 +472,7 @@ void v4l_printk_ioctl_arg(char *s,unsigned int cmd, void *arg) prt_names(p->memory,v4l2_memory_names), p->m.userptr); printk ("%s: timecode= %02d:%02d:%02d type=%d, " - "flags=0x%08d, frames=%d, userbits=0x%p", + "flags=0x%08x, frames=%d, userbits=0x%08p\n", s,tc->hours,tc->minutes,tc->seconds, tc->type, tc->flags, tc->frames, tc->userbits); break; @@ -665,7 +658,7 @@ void v4l_printk_ioctl_arg(char *s,unsigned int cmd, void *arg) case VIDIOC_INT_G_VIDEO_ROUTING: { struct v4l2_routing *p=arg; - printk ("%s: input=%d, output=%d\n", s, p->input, p->output); + printk ("%s: input=0x%x, output=0x%x\n", s, p->input, p->output); break; } case VIDIOC_G_SLICED_VBI_CAP: -- cgit v1.2.2