From 9160723ed620f31bf38332dee02041b1cb4c9967 Mon Sep 17 00:00:00 2001 From: Hermann Pitton Date: Thu, 7 Dec 2006 21:45:28 -0300 Subject: V4L/DVB (4961): Add support for the ASUS P7131 remote control Besides adding the board specific code, this patch moves the RC5 decoding code from bt8xx to ir-functions.c to make it available for all drivers. Signed-off-by: Marc Fargas Signed-off-by: Hermann Pitton Signed-off-by: Hartmut Hackmann Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/bt8xx/bttv-input.c | 143 +++++---------------------------- 1 file changed, 20 insertions(+), 123 deletions(-) (limited to 'drivers/media/video/bt8xx/bttv-input.c') diff --git a/drivers/media/video/bt8xx/bttv-input.c b/drivers/media/video/bt8xx/bttv-input.c index cbc012f71f52..14c07c606632 100644 --- a/drivers/media/video/bt8xx/bttv-input.c +++ b/drivers/media/video/bt8xx/bttv-input.c @@ -36,13 +36,18 @@ module_param(repeat_delay, int, 0644); static int repeat_period = 33; module_param(repeat_period, int, 0644); +int ir_rc5_remote_gap = 885; +module_param(ir_rc5_remote_gap, int, 0644); +int ir_rc5_key_timeout = 200; +module_param(ir_rc5_key_timeout, int, 0644); + #define DEVNAME "bttv-input" /* ---------------------------------------------------------------------- */ static void ir_handle_key(struct bttv *btv) { - struct bttv_ir *ir = btv->remote; + struct card_ir *ir = btv->remote; u32 gpio,data; /* read gpio value */ @@ -72,7 +77,7 @@ static void ir_handle_key(struct bttv *btv) void bttv_input_irq(struct bttv *btv) { - struct bttv_ir *ir = btv->remote; + struct card_ir *ir = btv->remote; if (!ir->polling) ir_handle_key(btv); @@ -81,7 +86,7 @@ void bttv_input_irq(struct bttv *btv) static void bttv_input_timer(unsigned long data) { struct bttv *btv = (struct bttv*)data; - struct bttv_ir *ir = btv->remote; + struct card_ir *ir = btv->remote; unsigned long timeout; ir_handle_key(btv); @@ -91,51 +96,9 @@ static void bttv_input_timer(unsigned long data) /* ---------------------------------------------------------------*/ -static int rc5_remote_gap = 885; -module_param(rc5_remote_gap, int, 0644); -static int rc5_key_timeout = 200; -module_param(rc5_key_timeout, int, 0644); - -#define RC5_START(x) (((x)>>12)&3) -#define RC5_TOGGLE(x) (((x)>>11)&1) -#define RC5_ADDR(x) (((x)>>6)&31) -#define RC5_INSTR(x) ((x)&63) - -/* decode raw bit pattern to RC5 code */ -static u32 rc5_decode(unsigned int code) -{ - unsigned int org_code = code; - unsigned int pair; - unsigned int rc5 = 0; - int i; - - code = (code << 1) | 1; - for (i = 0; i < 14; ++i) { - pair = code & 0x3; - code >>= 2; - - rc5 <<= 1; - switch (pair) { - case 0: - case 2: - break; - case 1: - rc5 |= 1; - break; - case 3: - dprintk(KERN_WARNING "bad code: %x\n", org_code); - return 0; - } - } - dprintk(KERN_WARNING "code=%x, rc5=%x, start=%x, toggle=%x, address=%x, " - "instr=%x\n", rc5, org_code, RC5_START(rc5), - RC5_TOGGLE(rc5), RC5_ADDR(rc5), RC5_INSTR(rc5)); - return rc5; -} - static int bttv_rc5_irq(struct bttv *btv) { - struct bttv_ir *ir = btv->remote; + struct card_ir *ir = btv->remote; struct timeval tv; u32 gpio; u32 gap; @@ -165,8 +128,8 @@ static int bttv_rc5_irq(struct bttv *btv) /* only if in the code (otherwise spurious IRQ or timer late) */ if (ir->last_bit < 28) { - ir->last_bit = (gap - rc5_remote_gap / 2) / - rc5_remote_gap; + ir->last_bit = (gap - ir_rc5_remote_gap / 2) / + ir_rc5_remote_gap; ir->code |= 1 << ir->last_bit; } /* starting new code */ @@ -186,80 +149,9 @@ static int bttv_rc5_irq(struct bttv *btv) return 1; } - -static void bttv_rc5_timer_end(unsigned long data) -{ - struct bttv_ir *ir = (struct bttv_ir *)data; - struct timeval tv; - unsigned long current_jiffies, timeout; - u32 gap; - - /* get time */ - current_jiffies = jiffies; - do_gettimeofday(&tv); - - /* avoid overflow with gap >1s */ - if (tv.tv_sec - ir->base_time.tv_sec > 1) { - gap = 200000; - } else { - gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) + - tv.tv_usec - ir->base_time.tv_usec; - } - - /* Allow some timmer jitter (RC5 is ~24ms anyway so this is ok) */ - if (gap < 28000) { - dprintk(KERN_WARNING "spurious timer_end\n"); - return; - } - - ir->active = 0; - if (ir->last_bit < 20) { - /* ignore spurious codes (caused by light/other remotes) */ - dprintk(KERN_WARNING "short code: %x\n", ir->code); - } else { - u32 rc5 = rc5_decode(ir->code); - - /* two start bits? */ - if (RC5_START(rc5) != 3) { - dprintk(KERN_WARNING "rc5 start bits invalid: %u\n", RC5_START(rc5)); - - /* right address? */ - } else if (RC5_ADDR(rc5) == 0x0) { - u32 toggle = RC5_TOGGLE(rc5); - u32 instr = RC5_INSTR(rc5); - - /* Good code, decide if repeat/repress */ - if (toggle != RC5_TOGGLE(ir->last_rc5) || - instr != RC5_INSTR(ir->last_rc5)) { - dprintk(KERN_WARNING "instruction %x, toggle %x\n", instr, - toggle); - ir_input_nokey(ir->dev, &ir->ir); - ir_input_keydown(ir->dev, &ir->ir, instr, - instr); - } - - /* Set/reset key-up timer */ - timeout = current_jiffies + (500 + rc5_key_timeout - * HZ) / 1000; - mod_timer(&ir->timer_keyup, timeout); - - /* Save code for repeat test */ - ir->last_rc5 = rc5; - } - } -} - -static void bttv_rc5_timer_keyup(unsigned long data) -{ - struct bttv_ir *ir = (struct bttv_ir *)data; - - dprintk(KERN_DEBUG "key released\n"); - ir_input_nokey(ir->dev, &ir->ir); -} - /* ---------------------------------------------------------------------- */ -static void bttv_ir_start(struct bttv *btv, struct bttv_ir *ir) +static void bttv_ir_start(struct bttv *btv, struct card_ir *ir) { if (ir->polling) { init_timer(&ir->timer); @@ -270,12 +162,17 @@ static void bttv_ir_start(struct bttv *btv, struct bttv_ir *ir) } else if (ir->rc5_gpio) { /* set timer_end for code completion */ init_timer(&ir->timer_end); - ir->timer_end.function = bttv_rc5_timer_end; + ir->timer_end.function = ir_rc5_timer_end; ir->timer_end.data = (unsigned long)ir; init_timer(&ir->timer_keyup); - ir->timer_keyup.function = bttv_rc5_timer_keyup; + ir->timer_keyup.function = ir_rc5_timer_keyup; ir->timer_keyup.data = (unsigned long)ir; + ir->shift_by = 1; + ir->start = 3; + ir->addr = 0x0; + ir->rc5_key_timeout = ir_rc5_key_timeout; + ir->rc5_remote_gap = ir_rc5_remote_gap; } } @@ -299,7 +196,7 @@ static void bttv_ir_stop(struct bttv *btv) int bttv_input_init(struct bttv *btv) { - struct bttv_ir *ir; + struct card_ir *ir; IR_KEYTAB_TYPE *ir_codes = NULL; struct input_dev *input_dev; int ir_type = IR_TYPE_OTHER; -- cgit v1.2.2