From ecb60deb9d5bbcbab6c87ee5fde6f8368197fcac Mon Sep 17 00:00:00 2001 From: Hartmut Hackmann Date: Thu, 7 Jul 2005 17:57:40 -0700 Subject: [PATCH] dvb: frontend: tda1004x update o added config options for IF frequency and AGC o support DSP boot from on board eeprom o added pll sleep call Signed-off-by: Hartmut Hackmann Signed-off-by: Johannes Stezenbach Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/media/dvb/frontends/tda1004x.c | 193 +++++++++++++++++---------------- 1 file changed, 97 insertions(+), 96 deletions(-) (limited to 'drivers/media/dvb/frontends/tda1004x.c') diff --git a/drivers/media/dvb/frontends/tda1004x.c b/drivers/media/dvb/frontends/tda1004x.c index 0beb370792ae..8428c04914e4 100644 --- a/drivers/media/dvb/frontends/tda1004x.c +++ b/drivers/media/dvb/frontends/tda1004x.c @@ -49,10 +49,8 @@ struct tda1004x_state { /* private demod data */ u8 initialised; enum tda1004x_demod demod_type; - u8 fw_version; }; - static int debug; #define dprintk(args...) \ do { \ @@ -315,20 +313,35 @@ static int tda1004x_do_upload(struct tda1004x_state *state, memcpy(buf + 1, mem + pos, tx_size); fw_msg.len = tx_size + 1; if (i2c_transfer(state->i2c, &fw_msg, 1) != 1) { - printk("tda1004x: Error during firmware upload\n"); + printk(KERN_ERR "tda1004x: Error during firmware upload\n"); return -EIO; } pos += tx_size; dprintk("%s: fw_pos=0x%x\n", __FUNCTION__, pos); } + // give the DSP a chance to settle 03/10/05 Hac + msleep(100); return 0; } -static int tda1004x_check_upload_ok(struct tda1004x_state *state, u8 dspVersion) +static int tda1004x_check_upload_ok(struct tda1004x_state *state) { u8 data1, data2; + unsigned long timeout; + + if (state->demod_type == TDA1004X_DEMOD_TDA10046) { + timeout = jiffies + 2 * HZ; + while(!(tda1004x_read_byte(state, TDA1004X_STATUS_CD) & 0x20)) { + if (time_after(jiffies, timeout)) { + printk(KERN_ERR "tda1004x: timeout waiting for DSP ready\n"); + break; + } + msleep(1); + } + } else + msleep(100); // check upload was OK tda1004x_write_mask(state, TDA1004X_CONFC4, 0x10, 0); // we want to read from the DSP @@ -336,9 +349,11 @@ static int tda1004x_check_upload_ok(struct tda1004x_state *state, u8 dspVersion) data1 = tda1004x_read_byte(state, TDA1004X_DSP_DATA1); data2 = tda1004x_read_byte(state, TDA1004X_DSP_DATA2); - if ((data1 != 0x67) || (data2 != dspVersion)) + if (data1 != 0x67 || data2 < 0x20 || data2 > 0x2a) { + printk(KERN_INFO "tda1004x: found firmware revision %x -- invalid\n", data2); return -EIO; - + } + printk(KERN_INFO "tda1004x: found firmware revision %x -- ok\n", data2); return 0; } @@ -349,14 +364,14 @@ static int tda10045_fwupload(struct dvb_frontend* fe) const struct firmware *fw; /* don't re-upload unless necessary */ - if (tda1004x_check_upload_ok(state, 0x2c) == 0) + if (tda1004x_check_upload_ok(state) == 0) return 0; /* request the firmware, this will block until someone uploads it */ - printk("tda1004x: waiting for firmware upload (%s)...\n", TDA10045_DEFAULT_FIRMWARE); + printk(KERN_INFO "tda1004x: waiting for firmware upload (%s)...\n", TDA10045_DEFAULT_FIRMWARE); ret = state->config->request_firmware(fe, &fw, TDA10045_DEFAULT_FIRMWARE); if (ret) { - printk("tda1004x: no firmware upload (timeout or file not found?)\n"); + printk(KERN_ERR "tda1004x: no firmware upload (timeout or file not found?)\n"); return ret; } @@ -372,93 +387,81 @@ static int tda10045_fwupload(struct dvb_frontend* fe) ret = tda1004x_do_upload(state, fw->data, fw->size, TDA10045H_FWPAGE, TDA10045H_CODE_IN); if (ret) return ret; - printk("tda1004x: firmware upload complete\n"); + printk(KERN_INFO "tda1004x: firmware upload complete\n"); /* wait for DSP to initialise */ /* DSPREADY doesn't seem to work on the TDA10045H */ msleep(100); - return tda1004x_check_upload_ok(state, 0x2c); + return tda1004x_check_upload_ok(state); } -static int tda10046_get_fw_version(struct tda1004x_state *state, - const struct firmware *fw) +static void tda10046_init_plls(struct dvb_frontend* fe) { - const unsigned char pattern[] = { 0x67, 0x00, 0x50, 0x62, 0x5e, 0x18, 0x67 }; - unsigned int i; - - /* area guessed from firmware v20, v21 and v25 */ - for (i = 0x660; i < 0x700; i++) { - if (!memcmp(&fw->data[i], pattern, sizeof(pattern))) { - state->fw_version = fw->data[i + sizeof(pattern)]; - printk(KERN_INFO "tda1004x: using firmware v%02x\n", - state->fw_version); - return 0; - } - } + struct tda1004x_state* state = fe->demodulator_priv; - return -EINVAL; + tda1004x_write_byteI(state, TDA10046H_CONFPLL1, 0xf0); + tda1004x_write_byteI(state, TDA10046H_CONFPLL2, 10); // PLL M = 10 + if (state->config->xtal_freq == TDA10046_XTAL_4M ) { + dprintk("%s: setting up PLLs for a 4 MHz Xtal\n", __FUNCTION__); + tda1004x_write_byteI(state, TDA10046H_CONFPLL3, 0); // PLL P = N = 0 + } else { + dprintk("%s: setting up PLLs for a 16 MHz Xtal\n", __FUNCTION__); + tda1004x_write_byteI(state, TDA10046H_CONFPLL3, 3); // PLL P = 0, N = 3 + } + tda1004x_write_byteI(state, TDA10046H_FREQ_OFFSET, 99); + switch (state->config->if_freq) { + case TDA10046_FREQ_3617: + tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0xd4); + tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x2c); + break; + case TDA10046_FREQ_3613: + tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0xd4); + tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x13); + break; + } + tda10046h_set_bandwidth(state, BANDWIDTH_8_MHZ); // default bandwidth 8 MHz } static int tda10046_fwupload(struct dvb_frontend* fe) { struct tda1004x_state* state = fe->demodulator_priv; - unsigned long timeout; int ret; const struct firmware *fw; /* reset + wake up chip */ - tda1004x_write_mask(state, TDA1004X_CONFC4, 1, 0); + tda1004x_write_byteI(state, TDA1004X_CONFC4, 0); tda1004x_write_mask(state, TDA10046H_CONF_TRISTATE1, 1, 0); - msleep(100); + /* let the clocks recover from sleep */ + msleep(5); /* don't re-upload unless necessary */ - if (tda1004x_check_upload_ok(state, state->fw_version) == 0) + if (tda1004x_check_upload_ok(state) == 0) return 0; - /* request the firmware, this will block until someone uploads it */ - printk("tda1004x: waiting for firmware upload (%s)...\n", TDA10046_DEFAULT_FIRMWARE); - ret = state->config->request_firmware(fe, &fw, TDA10046_DEFAULT_FIRMWARE); - if (ret) { - printk("tda1004x: no firmware upload (timeout or file not found?)\n"); - return ret; - } - - if (fw->size < 24478) { /* size of firmware v20, which is the smallest of v20, v21 and v25 */ - printk("tda1004x: firmware file seems to be too small (%d bytes)\n", fw->size); - return -EINVAL; - } - - ret = tda10046_get_fw_version(state, fw); - if (ret < 0) { - printk("tda1004x: unable to find firmware version\n"); - return ret; - } - /* set parameters */ - tda1004x_write_byteI(state, TDA10046H_CONFPLL2, 10); - tda1004x_write_byteI(state, TDA10046H_CONFPLL3, state->config->n_i2c); - tda1004x_write_byteI(state, TDA10046H_FREQ_OFFSET, 99); - tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0xd4); - tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x2c); - tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 8); // going to boot from HOST - - ret = tda1004x_do_upload(state, fw->data, fw->size, TDA10046H_CODE_CPT, TDA10046H_CODE_IN); - if (ret) - return ret; - printk("tda1004x: firmware upload complete\n"); - - /* wait for DSP to initialise */ - timeout = jiffies + HZ; - while (!(tda1004x_read_byte(state, TDA1004X_STATUS_CD) & 0x20)) { - if (time_after(jiffies, timeout)) { - printk("tda1004x: DSP failed to initialised.\n"); - return -EIO; + tda10046_init_plls(fe); + + if (state->config->request_firmware != NULL) { + /* request the firmware, this will block until someone uploads it */ + printk(KERN_INFO "tda1004x: waiting for firmware upload...\n"); + ret = state->config->request_firmware(fe, &fw, TDA10046_DEFAULT_FIRMWARE); + if (ret) { + printk(KERN_ERR "tda1004x: no firmware upload (timeout or file not found?)\n"); + return ret; } - msleep(1); + tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 8); // going to boot from HOST + ret = tda1004x_do_upload(state, fw->data, fw->size, TDA10046H_CODE_CPT, TDA10046H_CODE_IN); + if (ret) + return ret; + } else { + /* boot from firmware eeprom */ + /* Hac Note: we might need to do some GPIO Magic here */ + printk(KERN_INFO "tda1004x: booting from eeprom\n"); + tda1004x_write_mask(state, TDA1004X_CONFC4, 4, 4); + msleep(300); } - - return tda1004x_check_upload_ok(state, state->fw_version); + return tda1004x_check_upload_ok(state); } static int tda1004x_encode_fec(int fec) @@ -560,12 +563,10 @@ static int tda10046_init(struct dvb_frontend* fe) if (tda10046_fwupload(fe)) { printk("tda1004x: firmware upload failed\n"); - return -EIO; + return -EIO; } - tda1004x_write_mask(state, TDA1004X_CONFC4, 1, 0); // wake up the chip - - // Init the PLL + // Init the tuner PLL if (state->config->pll_init) { tda1004x_enable_tuner_i2c(state); state->config->pll_init(fe); @@ -574,32 +575,34 @@ static int tda10046_init(struct dvb_frontend* fe) // tda setup tda1004x_write_mask(state, TDA1004X_CONFC4, 0x20, 0); // disable DSP watchdog timer - tda1004x_write_mask(state, TDA1004X_CONFC1, 0x40, 0x40); - tda1004x_write_mask(state, TDA1004X_AUTO, 8, 0); // select HP stream - tda1004x_write_mask(state, TDA1004X_CONFC1, 0x80, 0); // disable pulse killer - tda1004x_write_byteI(state, TDA10046H_CONFPLL2, 10); // PLL M = 10 - tda1004x_write_byteI(state, TDA10046H_CONFPLL3, state->config->n_i2c); // PLL P = N = 0 - tda1004x_write_byteI(state, TDA10046H_FREQ_OFFSET, 99); // FREQOFFS = 99 - tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0xd4); // } PHY2 = -11221 - tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x2c); // } - tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0); // AGC setup - tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0x60, 0x60); // set AGC polarities + tda1004x_write_byteI(state, TDA1004X_AUTO, 7); // select HP stream + tda1004x_write_byteI(state, TDA1004X_CONFC1, 8); // disable pulse killer + + tda10046_init_plls(fe); + switch (state->config->agc_config) { + case TDA10046_AGC_DEFAULT: + tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x00); // AGC setup + tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x60); // set AGC polarities + break; + case TDA10046_AGC_IFO_AUTO_NEG: + tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x0a); // AGC setup + tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x60); // set AGC polarities + break; + } + tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE1, 0x61); // Turn both AGC outputs on tda1004x_write_byteI(state, TDA10046H_AGC_TUN_MIN, 0); // } tda1004x_write_byteI(state, TDA10046H_AGC_TUN_MAX, 0xff); // } AGC min/max values tda1004x_write_byteI(state, TDA10046H_AGC_IF_MIN, 0); // } tda1004x_write_byteI(state, TDA10046H_AGC_IF_MAX, 0xff); // } - tda1004x_write_mask(state, TDA10046H_CVBER_CTRL, 0x30, 0x10); // 10^6 VBER measurement bits tda1004x_write_byteI(state, TDA10046H_AGC_GAINS, 1); // IF gain 2, TUN gain 1 - tda1004x_write_mask(state, TDA1004X_AUTO, 0x80, 0); // crystal is 50ppm + tda1004x_write_byteI(state, TDA10046H_CVBER_CTRL, 0x1a); // 10^6 VBER measurement bits tda1004x_write_byteI(state, TDA1004X_CONF_TS1, 7); // MPEG2 interface config - tda1004x_write_mask(state, TDA1004X_CONF_TS2, 0x31, 0); // MPEG2 interface config - tda1004x_write_mask(state, TDA10046H_CONF_TRISTATE1, 0x9e, 0); // disable AGC_TUN + tda1004x_write_byteI(state, TDA1004X_CONF_TS2, 0xc0); // MPEG2 interface config + tda1004x_write_mask(state, 0x3a, 0x80, state->config->invert_oclk << 7); + tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE2, 0xe1); // tristate setup tda1004x_write_byteI(state, TDA10046H_GPIO_OUT_SEL, 0xcc); // GPIO output config - tda1004x_write_mask(state, TDA10046H_GPIO_SELECT, 8, 8); // GPIO select - tda10046h_set_bandwidth(state, BANDWIDTH_8_MHZ); // default bandwidth 8 MHz - - tda1004x_write_mask(state, 0x3a, 0x80, state->config->invert_oclk << 7); + tda1004x_write_byteI(state, TDA10046H_GPIO_SELECT, 8); // GPIO select state->initialised = 1; return 0; @@ -629,9 +632,6 @@ static int tda1004x_set_fe(struct dvb_frontend* fe, state->config->pll_set(fe, fe_params); tda1004x_disable_tuner_i2c(state); - if (state->demod_type == TDA1004X_DEMOD_TDA10046) - tda1004x_write_mask(state, TDA10046H_AGC_CONF, 4, 4); - // Hardcoded to use auto as much as possible on the TDA10045 as it // is very unreliable if AUTO mode is _not_ used. if (state->demod_type == TDA1004X_DEMOD_TDA10045) { @@ -1090,6 +1090,8 @@ static int tda1004x_sleep(struct dvb_frontend* fe) case TDA1004X_DEMOD_TDA10046: tda1004x_write_mask(state, TDA1004X_CONFC4, 1, 1); + if (state->config->pll_sleep != NULL) + state->config->pll_sleep(fe); break; } state->initialised = 0; @@ -1216,7 +1218,6 @@ struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config, memcpy(&state->ops, &tda10046_ops, sizeof(struct dvb_frontend_ops)); state->initialised = 0; state->demod_type = TDA1004X_DEMOD_TDA10046; - state->fw_version = 0x20; /* dummy default value */ /* check if the demod is there */ if (tda1004x_read_byte(state, TDA1004X_CHIPID) != 0x46) { -- cgit v1.2.2