From 6e99e4582861578fb00d84d085f8f283569f51dd Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 10 Jul 2006 04:44:42 -0700 Subject: [PATCH] powerpc: fix trigger handling in the new irq code This patch slightly reworks the new irq code to fix a small design error. I removed the passing of the trigger to the map() calls entirely, it was not a good idea to have one call do two different things. It also fixes a couple of corner cases. Mapping a linux virtual irq to a physical irq now does only that. Setting the trigger is a different action which has a different call. The main changes are: - I no longer call host->ops->map() for an already mapped irq, I just return the virtual number that was already mapped. It was called before to give an opportunity to change the trigger, but that was causing issues as that could happen while the interrupt was in use by a device, and because of the trigger change, map would potentially muck around with things in a racy way. That was causing much burden on a given's controller implementation of map() to get it right. This is much simpler now. map() is only called on the initial mapping of an irq, meaning that you know that this irq is _not_ being used. You can initialize the hardware if you want (though you don't have to). - Controllers that can handle different type of triggers (level/edge/etc...) now implement the standard irq_chip->set_type() call as defined by the generic code. That means that you can use the standard set_irq_type() to configure an irq line manually if you wish or (though I don't like that interface), pass explicit trigger flags to request_irq() as defined by the generic kernel interfaces. Also, using those interfaces guarantees that your controller set_type callback is called with the descriptor lock held, thus providing locking against activity on the same interrupt (including mask/unmask/etc...) automatically. A result is that, for example, MPIC's own map() implementation calls irq_set_type(NONE) to configure the hardware to the default triggers. - To allow the above, the irq_map array entry for the new mapped interrupt is now set before map() callback is called for the controller. - The irq_create_of_mapping() (also used by irq_of_parse_and_map()) function for mapping interrupts from the device-tree now also call the separate set_irq_type(), and only does so if there is a change in the trigger type. - While I was at it, I changed pci_read_irq_line() (which is the helper I would expect most archs to use in their pcibios_fixup() to get the PCI interrupt routing from the device tree) to also handle a fallback when the DT mapping fails consisting of reading the PCI_INTERRUPT_PIN to know wether the device has an interrupt at all, and the the PCI_INTERRUPT_LINE to get an interrupt number from the device. That number is then mapped using the default controller, and the trigger is set to level low. That default behaviour works for several platforms that don't have a proper interrupt tree like Pegasos. If it doesn't work for your platform, then either provide a proper interrupt tree from the firmware so that fallback isn't needed, or don't call pci_read_irq_line() - Add back a bit that got dropped by my main rework patch for properly clearing pending IPIs on pSeries when using a kexec Signed-off-by: Benjamin Herrenschmidt Cc: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/macintosh/macio_asic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/macintosh') diff --git a/drivers/macintosh/macio_asic.c b/drivers/macintosh/macio_asic.c index 80c0c665b5f6..82657bc86d19 100644 --- a/drivers/macintosh/macio_asic.c +++ b/drivers/macintosh/macio_asic.c @@ -330,7 +330,7 @@ static void macio_create_fixup_irq(struct macio_dev *dev, int index, { unsigned int irq; - irq = irq_create_mapping(NULL, line, 0); + irq = irq_create_mapping(NULL, line); if (irq != NO_IRQ) { dev->interrupt[index].start = irq; dev->interrupt[index].flags = IORESOURCE_IRQ; -- cgit v1.2.2 From f620753b9584558cd3bcc1712fca16663aacdce4 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 10 Jul 2006 04:44:44 -0700 Subject: [PATCH] powerpc: fix SMU driver interrupt mapping The SMU driver tries to map an interrupt from the device-tree before the interrupt controllers in the machine have been enumerated. This doesn't work properly and cause machines like the Quad g5 to fail booting later on when some drivers waits endlessly for an SMU request to complete. This is the second problem preventing boot on the Quad g5. This fixes it and also makes the SMU driver a bit more resilient to not having an interrupt. Signed-off-by: Benjamin Herrenschmidt Cc: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/macintosh/smu.c | 53 +++++++++++++++++++++++++++++++++++-------------- 1 file changed, 38 insertions(+), 15 deletions(-) (limited to 'drivers/macintosh') diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c index f139a74696fe..00ef46898147 100644 --- a/drivers/macintosh/smu.c +++ b/drivers/macintosh/smu.c @@ -75,9 +75,11 @@ struct smu_device { struct of_device *of_dev; int doorbell; /* doorbell gpio */ u32 __iomem *db_buf; /* doorbell buffer */ - int db_irq; + struct device_node *db_node; + unsigned int db_irq; int msg; - int msg_irq; + struct device_node *msg_node; + unsigned int msg_irq; struct smu_cmd_buf *cmd_buf; /* command buffer virtual */ u32 cmd_buf_abs; /* command buffer absolute */ struct list_head cmd_list; @@ -93,6 +95,7 @@ struct smu_device { */ static struct smu_device *smu; static DEFINE_MUTEX(smu_part_access); +static int smu_irq_inited; static void smu_i2c_retry(unsigned long data); @@ -257,6 +260,10 @@ int smu_queue_cmd(struct smu_cmd *cmd) smu_start_cmd(); spin_unlock_irqrestore(&smu->lock, flags); + /* Workaround for early calls when irq isn't available */ + if (!smu_irq_inited || smu->db_irq == NO_IRQ) + smu_spinwait_cmd(cmd); + return 0; } EXPORT_SYMBOL(smu_queue_cmd); @@ -478,14 +485,15 @@ int __init smu_init (void) smu->cmd_buf_abs = (u32)smu_cmdbuf_abs; smu->cmd_buf = (struct smu_cmd_buf *)abs_to_virt(smu_cmdbuf_abs); - np = of_find_node_by_name(NULL, "smu-doorbell"); - if (np == NULL) { + smu->db_node = of_find_node_by_name(NULL, "smu-doorbell"); + if (smu->db_node == NULL) { printk(KERN_ERR "SMU: Can't find doorbell GPIO !\n"); goto fail; } - data = (u32 *)get_property(np, "reg", NULL); + data = (u32 *)get_property(smu->db_node, "reg", NULL); if (data == NULL) { - of_node_put(np); + of_node_put(smu->db_node); + smu->db_node = NULL; printk(KERN_ERR "SMU: Can't find doorbell GPIO address !\n"); goto fail; } @@ -497,25 +505,21 @@ int __init smu_init (void) smu->doorbell = *data; if (smu->doorbell < 0x50) smu->doorbell += 0x50; - smu->db_irq = irq_of_parse_and_map(np, 0); - - of_node_put(np); /* Now look for the smu-interrupt GPIO */ do { - np = of_find_node_by_name(NULL, "smu-interrupt"); - if (np == NULL) + smu->msg_node = of_find_node_by_name(NULL, "smu-interrupt"); + if (smu->msg_node == NULL) break; - data = (u32 *)get_property(np, "reg", NULL); + data = (u32 *)get_property(smu->msg_node, "reg", NULL); if (data == NULL) { - of_node_put(np); + of_node_put(smu->msg_node); + smu->msg_node = NULL; break; } smu->msg = *data; if (smu->msg < 0x50) smu->msg += 0x50; - smu->msg_irq = irq_of_parse_and_map(np, 0); - of_node_put(np); } while(0); /* Doorbell buffer is currently hard-coded, I didn't find a proper @@ -547,6 +551,19 @@ static int smu_late_init(void) smu->i2c_timer.function = smu_i2c_retry; smu->i2c_timer.data = (unsigned long)smu; + if (smu->db_node) { + smu->db_irq = irq_of_parse_and_map(smu->db_node, 0); + if (smu->db_irq == NO_IRQ) + printk(KERN_ERR "smu: failed to map irq for node %s\n", + smu->db_node->full_name); + } + if (smu->msg_node) { + smu->msg_irq = irq_of_parse_and_map(smu->msg_node, 0); + if (smu->msg_irq == NO_IRQ) + printk(KERN_ERR "smu: failed to map irq for node %s\n", + smu->msg_node->full_name); + } + /* * Try to request the interrupts */ @@ -571,6 +588,7 @@ static int smu_late_init(void) } } + smu_irq_inited = 1; return 0; } /* This has to be before arch_initcall as the low i2c stuff relies on the @@ -742,6 +760,11 @@ static void smu_i2c_low_completion(struct smu_cmd *scmd, void *misc) if (fail && --cmd->retries > 0) { DPRINTK("SMU: i2c failure, starting timer...\n"); BUG_ON(cmd != smu->cmd_i2c_cur); + if (!smu_irq_inited) { + mdelay(5); + smu_i2c_retry(0); + return; + } mod_timer(&smu->i2c_timer, jiffies + msecs_to_jiffies(5)); return; } -- cgit v1.2.2 From e01af0384f54023b4548b7742952da2ffcafd4cd Mon Sep 17 00:00:00 2001 From: Michael Hanselmann Date: Mon, 10 Jul 2006 04:44:45 -0700 Subject: [PATCH] powermac: Combined fixes for backlight code This patch fixes several problems: - pmac_backlight_key() is called under interrupt context, and therefore can't use mutexes or semaphores, so defer the backlight level for later, as it's not critical (original code by Aristeu S. Rozanski F. ). - Add exports for functions that might be called from modules - Fix Kconfig depdencies on PMAC_BACKLIGHT. - Fix locking issues on calls from inside the driver (reported by Aristeu S. Rozanski F., too) - Fix wrong calculation of backlight values in some of the drivers - Replace pmac_backlight_key_up/down by inline functions [akpm@osdl.org: fix function prototypes] Signed-off-by: Michael Hanselmann Acked-by: Aristeu S. Rozanski F. Acked-by: Rene Nussbaumer Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/macintosh/Kconfig | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers/macintosh') diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig index 54f3f6b94efc..f5fe7fb4b3ad 100644 --- a/drivers/macintosh/Kconfig +++ b/drivers/macintosh/Kconfig @@ -113,7 +113,10 @@ config PMAC_MEDIABAY config PMAC_BACKLIGHT bool "Backlight control for LCD screens" - depends on ADB_PMU && (BROKEN || !PPC64) + depends on ADB_PMU && FB = y && (BROKEN || !PPC64) + select FB_BACKLIGHT + select BACKLIGHT_CLASS_DEVICE + select BACKLIGHT_LCD_SUPPORT help Say Y here to enable Macintosh specific extensions of the generic backlight code. With this enabled, the brightness keys on older -- cgit v1.2.2 From d1a8df9136ff55e554e11ce65854c282965be8f5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 3 Jul 2006 14:28:14 +0200 Subject: [POWERPC] fix up front-LED Kconfig This patch fixes the front-LED Kconfig issues I introduced while creating it. Apparently having a dependency isn't enough to have the select not evaluated or something like that. The patch also changes the default configuration for pmac32 select the default for the LED to be the IDE trigger. While I was at it, I completely updated the defconfig and also added snd-aoa to it. Signed-off-by: Johannes Berg Signed-off-by: Paul Mackerras --- drivers/macintosh/Kconfig | 9 +++++++++ drivers/macintosh/via-pmu-led.c | 2 +- 2 files changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers/macintosh') diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig index f5fe7fb4b3ad..f18c956fd595 100644 --- a/drivers/macintosh/Kconfig +++ b/drivers/macintosh/Kconfig @@ -90,6 +90,15 @@ config ADB_PMU_LED and the ide-disk LED trigger and configure appropriately through sysfs. +config ADB_PMU_LED_IDE + bool "Use front LED as IDE LED by default" + depends on ADB_PMU_LED + select LEDS_TRIGGERS + select LEDS_TRIGGER_IDE_DISK + help + This option makes the front LED default to the IDE trigger + so that it blinks on IDE activity. + config PMAC_SMU bool "Support for SMU based PowerMacs" depends on PPC_PMAC64 diff --git a/drivers/macintosh/via-pmu-led.c b/drivers/macintosh/via-pmu-led.c index af8375ed0f5e..5189d5454b1f 100644 --- a/drivers/macintosh/via-pmu-led.c +++ b/drivers/macintosh/via-pmu-led.c @@ -74,7 +74,7 @@ static void pmu_led_set(struct led_classdev *led_cdev, static struct led_classdev pmu_led = { .name = "pmu-front-led", -#ifdef CONFIG_BLK_DEV_IDE_PMAC_BLINK +#ifdef CONFIG_ADB_PMU_LED_IDE .default_trigger = "ide-disk", #endif .brightness_set = pmu_led_set, -- cgit v1.2.2 From 8279d2e6062673f31c59ad9e2104024123154267 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 6 Jul 2006 18:03:06 +1000 Subject: [POWERPC] Xserve G5 thermal control fixes The thermal control for the Xserve G5s had a few issues. For one, the way to program the RPM fans speeds into the FCU is different between it and the desktop models, which I didn't figure out until recently, and it was missing a control loop for the slots fan, running it too fast. Both of those problems were causing the machine to be much more noisy than necessary. This patch also changes the fixed value of the slots fan for desktop G5s to 40% instead of 50%. It seems to still have a pretty good airflow that way and is much less noisy. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- drivers/macintosh/therm_pm72.c | 218 ++++++++++++++++++++++++++++++++++++++--- drivers/macintosh/therm_pm72.h | 33 ++++++- 2 files changed, 234 insertions(+), 17 deletions(-) (limited to 'drivers/macintosh') diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c index c1fe0b368f76..20bf67244e2c 100644 --- a/drivers/macintosh/therm_pm72.c +++ b/drivers/macintosh/therm_pm72.c @@ -95,6 +95,17 @@ * - Use min/max macros here or there * - Latest darwin updated U3H min fan speed to 20% PWM * + * July. 06, 2006 : 1.3 + * - Fix setting of RPM fans on Xserve G5 (they were going too fast) + * - Add missing slots fan control loop for Xserve G5 + * - Lower fixed slots fan speed from 50% to 40% on desktop G5s. We + * still can't properly implement the control loop for these, so let's + * reduce the noise a little bit, it appears that 40% still gives us + * a pretty good air flow + * - Add code to "tickle" the FCU regulary so it doesn't think that + * we are gone while in fact, the machine just didn't need any fan + * speed change lately + * */ #include @@ -121,7 +132,7 @@ #include "therm_pm72.h" -#define VERSION "1.2b2" +#define VERSION "1.3" #undef DEBUG @@ -146,6 +157,7 @@ static struct basckside_pid_params backside_params; static struct backside_pid_state backside_state; static struct drives_pid_state drives_state; static struct dimm_pid_state dimms_state; +static struct slots_pid_state slots_state; static int state; static int cpu_count; static int cpu_pid_type; @@ -154,7 +166,8 @@ static struct completion ctrl_complete; static int critical_state; static int rackmac; static s32 dimm_output_clamp; - +static int fcu_rpm_shift; +static int fcu_tickle_ticks; static DECLARE_MUTEX(driver_lock); /* @@ -495,13 +508,20 @@ static int start_fcu(void) rc = fan_write_reg(0x2e, &buf, 1); if (rc < 0) return -EIO; + rc = fan_read_reg(0, &buf, 1); + if (rc < 0) + return -EIO; + fcu_rpm_shift = (buf == 1) ? 2 : 3; + printk(KERN_DEBUG "FCU Initialized, RPM fan shift is %d\n", + fcu_rpm_shift); + return 0; } static int set_rpm_fan(int fan_index, int rpm) { unsigned char buf[2]; - int rc, id; + int rc, id, min, max; if (fcu_fans[fan_index].type != FCU_FAN_RPM) return -EINVAL; @@ -509,12 +529,15 @@ static int set_rpm_fan(int fan_index, int rpm) if (id == FCU_FAN_ABSENT_ID) return -EINVAL; - if (rpm < 300) - rpm = 300; - else if (rpm > 8191) - rpm = 8191; - buf[0] = rpm >> 5; - buf[1] = rpm << 3; + min = 2400 >> fcu_rpm_shift; + max = 56000 >> fcu_rpm_shift; + + if (rpm < min) + rpm = min; + else if (rpm > max) + rpm = max; + buf[0] = rpm >> (8 - fcu_rpm_shift); + buf[1] = rpm << fcu_rpm_shift; rc = fan_write_reg(0x10 + (id * 2), buf, 2); if (rc < 0) return -EIO; @@ -551,7 +574,7 @@ static int get_rpm_fan(int fan_index, int programmed) if (rc != 2) return -EIO; - return (buf[0] << 5) | buf[1] >> 3; + return (buf[0] << (8 - fcu_rpm_shift)) | buf[1] >> fcu_rpm_shift; } static int set_pwm_fan(int fan_index, int pwm) @@ -609,6 +632,26 @@ static int get_pwm_fan(int fan_index) return (buf[0] * 1000) / 2559; } +static void tickle_fcu(void) +{ + int pwm; + + pwm = get_pwm_fan(SLOTS_FAN_PWM_INDEX); + + DBG("FCU Tickle, slots fan is: %d\n", pwm); + if (pwm < 0) + pwm = 100; + + if (!rackmac) { + pwm = SLOTS_FAN_DEFAULT_PWM; + } else if (pwm < SLOTS_PID_OUTPUT_MIN) + pwm = SLOTS_PID_OUTPUT_MIN; + + /* That is hopefully enough to make the FCU happy */ + set_pwm_fan(SLOTS_FAN_PWM_INDEX, pwm); +} + + /* * Utility routine to read the CPU calibration EEPROM data * from the device-tree @@ -715,6 +758,9 @@ BUILD_SHOW_FUNC_INT(backside_fan_pwm, backside_state.pwm) BUILD_SHOW_FUNC_FIX(drives_temperature, drives_state.last_temp) BUILD_SHOW_FUNC_INT(drives_fan_rpm, drives_state.rpm) +BUILD_SHOW_FUNC_FIX(slots_temperature, slots_state.last_temp) +BUILD_SHOW_FUNC_INT(slots_fan_pwm, slots_state.pwm) + BUILD_SHOW_FUNC_FIX(dimms_temperature, dimms_state.last_temp) static DEVICE_ATTR(cpu0_temperature,S_IRUGO,show_cpu0_temperature,NULL); @@ -735,6 +781,9 @@ static DEVICE_ATTR(backside_fan_pwm,S_IRUGO,show_backside_fan_pwm,NULL); static DEVICE_ATTR(drives_temperature,S_IRUGO,show_drives_temperature,NULL); static DEVICE_ATTR(drives_fan_rpm,S_IRUGO,show_drives_fan_rpm,NULL); +static DEVICE_ATTR(slots_temperature,S_IRUGO,show_slots_temperature,NULL); +static DEVICE_ATTR(slots_fan_pwm,S_IRUGO,show_slots_fan_pwm,NULL); + static DEVICE_ATTR(dimms_temperature,S_IRUGO,show_dimms_temperature,NULL); /* @@ -1076,6 +1125,9 @@ static void do_monitor_cpu_rack(struct cpu_pid_state *state) fan_min = dimm_output_clamp; fan_min = max(fan_min, (int)state->mpu.rminn_intake_fan); + DBG(" CPU min mpu = %d, min dimm = %d\n", + state->mpu.rminn_intake_fan, dimm_output_clamp); + state->rpm = max(state->rpm, (int)fan_min); state->rpm = min(state->rpm, (int)state->mpu.rmaxn_intake_fan); state->intake_rpm = state->rpm; @@ -1374,7 +1426,8 @@ static void do_monitor_drives(struct drives_pid_state *state) DBG(" current rpm: %d\n", state->rpm); /* Get some sensor readings */ - temp = le16_to_cpu(i2c_smbus_read_word_data(state->monitor, DS1775_TEMP)) << 8; + temp = le16_to_cpu(i2c_smbus_read_word_data(state->monitor, + DS1775_TEMP)) << 8; state->last_temp = temp; DBG(" temp: %d.%03d, target: %d.%03d\n", FIX32TOPRINT(temp), FIX32TOPRINT(DRIVES_PID_INPUT_TARGET)); @@ -1575,7 +1628,7 @@ static int init_dimms_state(struct dimm_pid_state *state) } /* - * Dispose of the state data for the drives control loop + * Dispose of the state data for the DIMM control loop */ static void dispose_dimms_state(struct dimm_pid_state *state) { @@ -1588,6 +1641,127 @@ static void dispose_dimms_state(struct dimm_pid_state *state) state->monitor = NULL; } +/* + * Slots fan control loop + */ +static void do_monitor_slots(struct slots_pid_state *state) +{ + s32 temp, integral, derivative; + s64 integ_p, deriv_p, prop_p, sum; + int i, rc; + + if (--state->ticks != 0) + return; + state->ticks = SLOTS_PID_INTERVAL; + + DBG("slots:\n"); + + /* Check fan status */ + rc = get_pwm_fan(SLOTS_FAN_PWM_INDEX); + if (rc < 0) { + printk(KERN_WARNING "Error %d reading slots fan !\n", rc); + /* XXX What do we do now ? */ + } else + state->pwm = rc; + DBG(" current pwm: %d\n", state->pwm); + + /* Get some sensor readings */ + temp = le16_to_cpu(i2c_smbus_read_word_data(state->monitor, + DS1775_TEMP)) << 8; + state->last_temp = temp; + DBG(" temp: %d.%03d, target: %d.%03d\n", FIX32TOPRINT(temp), + FIX32TOPRINT(SLOTS_PID_INPUT_TARGET)); + + /* Store temperature and error in history array */ + state->cur_sample = (state->cur_sample + 1) % SLOTS_PID_HISTORY_SIZE; + state->sample_history[state->cur_sample] = temp; + state->error_history[state->cur_sample] = temp - SLOTS_PID_INPUT_TARGET; + + /* If first loop, fill the history table */ + if (state->first) { + for (i = 0; i < (SLOTS_PID_HISTORY_SIZE - 1); i++) { + state->cur_sample = (state->cur_sample + 1) % + SLOTS_PID_HISTORY_SIZE; + state->sample_history[state->cur_sample] = temp; + state->error_history[state->cur_sample] = + temp - SLOTS_PID_INPUT_TARGET; + } + state->first = 0; + } + + /* Calculate the integral term */ + sum = 0; + integral = 0; + for (i = 0; i < SLOTS_PID_HISTORY_SIZE; i++) + integral += state->error_history[i]; + integral *= SLOTS_PID_INTERVAL; + DBG(" integral: %08x\n", integral); + integ_p = ((s64)SLOTS_PID_G_r) * (s64)integral; + DBG(" integ_p: %d\n", (int)(integ_p >> 36)); + sum += integ_p; + + /* Calculate the derivative term */ + derivative = state->error_history[state->cur_sample] - + state->error_history[(state->cur_sample + SLOTS_PID_HISTORY_SIZE - 1) + % SLOTS_PID_HISTORY_SIZE]; + derivative /= SLOTS_PID_INTERVAL; + deriv_p = ((s64)SLOTS_PID_G_d) * (s64)derivative; + DBG(" deriv_p: %d\n", (int)(deriv_p >> 36)); + sum += deriv_p; + + /* Calculate the proportional term */ + prop_p = ((s64)SLOTS_PID_G_p) * (s64)(state->error_history[state->cur_sample]); + DBG(" prop_p: %d\n", (int)(prop_p >> 36)); + sum += prop_p; + + /* Scale sum */ + sum >>= 36; + + DBG(" sum: %d\n", (int)sum); + state->pwm = (s32)sum; + + state->pwm = max(state->pwm, SLOTS_PID_OUTPUT_MIN); + state->pwm = min(state->pwm, SLOTS_PID_OUTPUT_MAX); + + DBG("** DRIVES PWM: %d\n", (int)state->pwm); + set_pwm_fan(SLOTS_FAN_PWM_INDEX, state->pwm); +} + +/* + * Initialize the state structure for the slots bay fan control loop + */ +static int init_slots_state(struct slots_pid_state *state) +{ + state->ticks = 1; + state->first = 1; + state->pwm = 50; + + state->monitor = attach_i2c_chip(XSERVE_SLOTS_LM75, "slots_temp"); + if (state->monitor == NULL) + return -ENODEV; + + device_create_file(&of_dev->dev, &dev_attr_slots_temperature); + device_create_file(&of_dev->dev, &dev_attr_slots_fan_pwm); + + return 0; +} + +/* + * Dispose of the state data for the slots control loop + */ +static void dispose_slots_state(struct slots_pid_state *state) +{ + if (state->monitor == NULL) + return; + + device_remove_file(&of_dev->dev, &dev_attr_slots_temperature); + device_remove_file(&of_dev->dev, &dev_attr_slots_fan_pwm); + + detach_i2c_chip(state->monitor); + state->monitor = NULL; +} + + static int call_critical_overtemp(void) { char *argv[] = { critical_overtemp_path, NULL }; @@ -1617,14 +1791,17 @@ static int main_control_loop(void *x) goto out; } - /* Set the PCI fan once for now */ - set_pwm_fan(SLOTS_FAN_PWM_INDEX, SLOTS_FAN_DEFAULT_PWM); + /* Set the PCI fan once for now on non-RackMac */ + if (!rackmac) + set_pwm_fan(SLOTS_FAN_PWM_INDEX, SLOTS_FAN_DEFAULT_PWM); /* Initialize ADCs */ initialize_adc(&cpu_state[0]); if (cpu_state[1].monitor != NULL) initialize_adc(&cpu_state[1]); + fcu_tickle_ticks = FCU_TICKLE_TICKS; + up(&driver_lock); while (state == state_attached) { @@ -1634,6 +1811,12 @@ static int main_control_loop(void *x) down(&driver_lock); + /* Tickle the FCU just in case */ + if (--fcu_tickle_ticks < 0) { + fcu_tickle_ticks = FCU_TICKLE_TICKS; + tickle_fcu(); + } + /* First, we always calculate the new DIMMs state on an Xserve */ if (rackmac) do_monitor_dimms(&dimms_state); @@ -1654,7 +1837,9 @@ static int main_control_loop(void *x) } /* Then, the rest */ do_monitor_backside(&backside_state); - if (!rackmac) + if (rackmac) + do_monitor_slots(&slots_state); + else do_monitor_drives(&drives_state); up(&driver_lock); @@ -1696,6 +1881,7 @@ static void dispose_control_loops(void) dispose_cpu_state(&cpu_state[1]); dispose_backside_state(&backside_state); dispose_drives_state(&drives_state); + dispose_slots_state(&slots_state); dispose_dimms_state(&dimms_state); } @@ -1745,6 +1931,8 @@ static int create_control_loops(void) goto fail; if (rackmac && init_dimms_state(&dimms_state)) goto fail; + if (rackmac && init_slots_state(&slots_state)) + goto fail; if (!rackmac && init_drives_state(&drives_state)) goto fail; diff --git a/drivers/macintosh/therm_pm72.h b/drivers/macintosh/therm_pm72.h index fc7e9b7ecaf2..393cc9df94e1 100644 --- a/drivers/macintosh/therm_pm72.h +++ b/drivers/macintosh/therm_pm72.h @@ -105,6 +105,7 @@ static char * critical_overtemp_path = "/sbin/critical_overtemp"; #define DRIVES_DALLAS_ID 0x94 #define BACKSIDE_MAX_ID 0x98 #define XSERVE_DIMMS_LM87 0x25a +#define XSERVE_SLOTS_LM75 0x290 /* * Some MAX6690, DS1775, LM87 register definitions @@ -198,7 +199,7 @@ struct drives_pid_state #define SLOTS_FAN_PWM_DEFAULT_ID 2 #define SLOTS_FAN_PWM_INDEX 2 -#define SLOTS_FAN_DEFAULT_PWM 50 /* Do better here ! */ +#define SLOTS_FAN_DEFAULT_PWM 40 /* Do better here ! */ /* @@ -206,7 +207,7 @@ struct drives_pid_state */ #define DIMM_PID_G_d 0 #define DIMM_PID_G_p 0 -#define DIMM_PID_G_r 0x6553600 +#define DIMM_PID_G_r 0x06553600 #define DIMM_PID_INPUT_TARGET 3276800 #define DIMM_PID_INTERVAL 1 #define DIMM_PID_OUTPUT_MAX 14000 @@ -226,6 +227,31 @@ struct dimm_pid_state }; +/* + * PID factors for the Xserve Slots control loop + */ +#define SLOTS_PID_G_d 0 +#define SLOTS_PID_G_p 0 +#define SLOTS_PID_G_r 0x00100000 +#define SLOTS_PID_INPUT_TARGET 3200000 +#define SLOTS_PID_INTERVAL 1 +#define SLOTS_PID_OUTPUT_MAX 100 +#define SLOTS_PID_OUTPUT_MIN 20 +#define SLOTS_PID_HISTORY_SIZE 20 + +struct slots_pid_state +{ + int ticks; + struct i2c_client * monitor; + s32 sample_history[SLOTS_PID_HISTORY_SIZE]; + s32 error_history[SLOTS_PID_HISTORY_SIZE]; + int cur_sample; + s32 last_temp; + int first; + int pwm; +}; + + /* Desktops */ @@ -283,6 +309,9 @@ struct cpu_pid_state s32 pump_max; }; +/* Tickle FCU every 10 seconds */ +#define FCU_TICKLE_TICKS 10 + /* * Driver state */ -- cgit v1.2.2 From 4c962b5a42e5fc24e2d5d73896732cf3578da260 Mon Sep 17 00:00:00 2001 From: Danny van Dyk Date: Tue, 11 Jul 2006 22:25:28 +0100 Subject: [POWERPC] PMAC_APM_EMU should depend on ADB_PMU This patch fixes undefined refereneces to pmu_ symbols on 2.6.17. Signed-Off-By: Danny van Dyk Signed-off-by: Daniel Drake Signed-off-by: Paul Mackerras --- drivers/macintosh/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/macintosh') diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig index f18c956fd595..44708b5e582d 100644 --- a/drivers/macintosh/Kconfig +++ b/drivers/macintosh/Kconfig @@ -109,7 +109,7 @@ config PMAC_SMU config PMAC_APM_EMU tristate "APM emulation" - depends on PPC_PMAC && PPC32 && PM + depends on PPC_PMAC && PPC32 && PM && ADB_PMU config PMAC_MEDIABAY bool "Support PowerBook hotswap media bay" -- cgit v1.2.2 From 4b755999d6e0c1d988fb448289abb6c226cd8c36 Mon Sep 17 00:00:00 2001 From: Michael Hanselmann Date: Sun, 30 Jul 2006 03:04:19 -0700 Subject: [PATCH] powermac: More powermac backlight fixes This patch fixes several problems: - The legacy backlight value might be set at interrupt time. Introduced a worker to prevent it from directly calling the backlight code. - via-pmu allows the backlight to be grabbed, in which case we need to prevent other kernel code from changing the brightness. - Don't send PMU requests in via-pmu-backlight when the machine is about to sleep or waking up. - More Kconfig fixes. Signed-off-by: Michael Hanselmann Cc: Benjamin Herrenschmidt Cc: "Antonino A. Daplas" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/macintosh/Kconfig | 2 -- drivers/macintosh/adbhid.c | 14 ++------ drivers/macintosh/via-pmu-backlight.c | 68 ++++++++++++++++++++++++++++------- drivers/macintosh/via-pmu.c | 39 ++++++++------------ 4 files changed, 72 insertions(+), 51 deletions(-) (limited to 'drivers/macintosh') diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig index f5fe7fb4b3ad..d162307e309f 100644 --- a/drivers/macintosh/Kconfig +++ b/drivers/macintosh/Kconfig @@ -115,8 +115,6 @@ config PMAC_BACKLIGHT bool "Backlight control for LCD screens" depends on ADB_PMU && FB = y && (BROKEN || !PPC64) select FB_BACKLIGHT - select BACKLIGHT_CLASS_DEVICE - select BACKLIGHT_LCD_SUPPORT help Say Y here to enable Macintosh specific extensions of the generic backlight code. With this enabled, the brightness keys on older diff --git a/drivers/macintosh/adbhid.c b/drivers/macintosh/adbhid.c index 545be1ed6927..c69d23bb255e 100644 --- a/drivers/macintosh/adbhid.c +++ b/drivers/macintosh/adbhid.c @@ -45,14 +45,11 @@ #include #include +#include #ifdef CONFIG_PPC_PMAC #include #endif -#ifdef CONFIG_PMAC_BACKLIGHT -#include -#endif - MODULE_AUTHOR("Franz Sirl "); #define KEYB_KEYREG 0 /* register # for key up/down data */ @@ -237,11 +234,6 @@ static struct adb_ids keyboard_ids; static struct adb_ids mouse_ids; static struct adb_ids buttons_ids; -#ifdef CONFIG_PMAC_BACKLIGHT -/* Exported to via-pmu.c */ -int disable_kernel_backlight = 0; -#endif /* CONFIG_PMAC_BACKLIGHT */ - /* Kind of keyboard, see Apple technote 1152 */ #define ADB_KEYBOARD_UNKNOWN 0 #define ADB_KEYBOARD_ANSI 0x0100 @@ -527,7 +519,7 @@ adbhid_buttons_input(unsigned char *data, int nb, struct pt_regs *regs, int auto case 0xa: /* brightness decrease */ #ifdef CONFIG_PMAC_BACKLIGHT - if (!disable_kernel_backlight && down) + if (down) pmac_backlight_key_down(); #endif input_report_key(adbhid[id]->input, KEY_BRIGHTNESSDOWN, down); @@ -535,7 +527,7 @@ adbhid_buttons_input(unsigned char *data, int nb, struct pt_regs *regs, int auto case 0x9: /* brightness increase */ #ifdef CONFIG_PMAC_BACKLIGHT - if (!disable_kernel_backlight && down) + if (down) pmac_backlight_key_up(); #endif input_report_key(adbhid[id]->input, KEY_BRIGHTNESSUP, down); diff --git a/drivers/macintosh/via-pmu-backlight.c b/drivers/macintosh/via-pmu-backlight.c index b42d05f2aaff..d3f8d75bcbb4 100644 --- a/drivers/macintosh/via-pmu-backlight.c +++ b/drivers/macintosh/via-pmu-backlight.c @@ -15,8 +15,9 @@ #define MAX_PMU_LEVEL 0xFF -static struct device_node *vias; static struct backlight_properties pmu_backlight_data; +static spinlock_t pmu_backlight_lock; +static int sleeping; static int pmu_backlight_get_level_brightness(struct fb_info *info, int level) @@ -40,23 +41,36 @@ static int pmu_backlight_update_status(struct backlight_device *bd) { struct fb_info *info = class_get_devdata(&bd->class_dev); struct adb_request req; - int pmulevel, level = bd->props->brightness; + unsigned long flags; + int level = bd->props->brightness; - if (vias == NULL) - return -ENODEV; + spin_lock_irqsave(&pmu_backlight_lock, flags); + + /* Don't update brightness when sleeping */ + if (sleeping) + goto out; if (bd->props->power != FB_BLANK_UNBLANK || bd->props->fb_blank != FB_BLANK_UNBLANK) level = 0; - pmulevel = pmu_backlight_get_level_brightness(info, level); + if (level > 0) { + int pmulevel = pmu_backlight_get_level_brightness(info, level); - pmu_request(&req, NULL, 2, PMU_BACKLIGHT_BRIGHT, pmulevel); - pmu_wait_complete(&req); + pmu_request(&req, NULL, 2, PMU_BACKLIGHT_BRIGHT, pmulevel); + pmu_wait_complete(&req); - pmu_request(&req, NULL, 2, PMU_POWER_CTRL, - PMU_POW_BACKLIGHT | (level > 0 ? PMU_POW_ON : PMU_POW_OFF)); - pmu_wait_complete(&req); + pmu_request(&req, NULL, 2, PMU_POWER_CTRL, + PMU_POW_BACKLIGHT | PMU_POW_ON); + pmu_wait_complete(&req); + } else { + pmu_request(&req, NULL, 2, PMU_POWER_CTRL, + PMU_POW_BACKLIGHT | PMU_POW_OFF); + pmu_wait_complete(&req); + } + +out: + spin_unlock_irqrestore(&pmu_backlight_lock, flags); return 0; } @@ -73,15 +87,39 @@ static struct backlight_properties pmu_backlight_data = { .max_brightness = (FB_BACKLIGHT_LEVELS - 1), }; -void __init pmu_backlight_init(struct device_node *in_vias) +#ifdef CONFIG_PM +static int pmu_backlight_sleep_call(struct pmu_sleep_notifier *self, int when) +{ + unsigned long flags; + + spin_lock_irqsave(&pmu_backlight_lock, flags); + + switch (when) { + case PBOOK_SLEEP_REQUEST: + sleeping = 1; + break; + case PBOOK_WAKE: + sleeping = 0; + break; + } + + spin_unlock_irqrestore(&pmu_backlight_lock, flags); + + return PBOOK_SLEEP_OK; +} + +static struct pmu_sleep_notifier pmu_backlight_sleep_notif = { + .notifier_call = pmu_backlight_sleep_call, +}; +#endif + +void __init pmu_backlight_init() { struct backlight_device *bd; struct fb_info *info; char name[10]; int level, autosave; - vias = in_vias; - /* Special case for the old PowerBook since I can't test on it */ autosave = machine_is_compatible("AAPL,3400/2400") || @@ -141,6 +179,10 @@ void __init pmu_backlight_init(struct device_node *in_vias) pmac_backlight = bd; mutex_unlock(&pmac_backlight_mutex); +#ifdef CONFIG_PM + pmu_register_sleep_notifier(&pmu_backlight_sleep_notif); +#endif + printk("pmubl: Backlight initialized (%s)\n", name); return; diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c index 06ca80bfd6b9..ea386801e215 100644 --- a/drivers/macintosh/via-pmu.c +++ b/drivers/macintosh/via-pmu.c @@ -16,7 +16,6 @@ * a sleep or a freq. switch * - Move sleep code out of here to pmac_pm, merge into new * common PM infrastructure - * - Move backlight code out as well * - Save/Restore PCI space properly * */ @@ -60,9 +59,7 @@ #include #include #include -#ifdef CONFIG_PMAC_BACKLIGHT #include -#endif #include "via-pmu-event.h" @@ -177,10 +174,6 @@ static int query_batt_timer = BATTERY_POLLING_COUNT; static struct adb_request batt_req; static struct proc_dir_entry *proc_pmu_batt[PMU_MAX_BATTERIES]; -#if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT) -extern int disable_kernel_backlight; -#endif /* defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT) */ - int __fake_sleep; int asleep; BLOCKING_NOTIFIER_HEAD(sleep_notifier_list); @@ -466,7 +459,7 @@ static int __init via_pmu_dev_init(void) #ifdef CONFIG_PMAC_BACKLIGHT /* Initialize backlight */ - pmu_backlight_init(vias); + pmu_backlight_init(); #endif #ifdef CONFIG_PPC32 @@ -1403,11 +1396,8 @@ next: else if ((1 << pirq) & PMU_INT_SNDBRT) { #ifdef CONFIG_PMAC_BACKLIGHT if (len == 3) -#ifdef CONFIG_INPUT_ADBHID - if (!disable_kernel_backlight) -#endif /* CONFIG_INPUT_ADBHID */ - pmac_backlight_set_legacy_brightness(data[1] >> 4); -#endif /* CONFIG_PMAC_BACKLIGHT */ + pmac_backlight_set_legacy_brightness_pmu(data[1] >> 4); +#endif } /* Tick interrupt */ else if ((1 << pirq) & PMU_INT_TICK) { @@ -2414,7 +2404,7 @@ struct pmu_private { spinlock_t lock; #if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT) int backlight_locker; -#endif /* defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT) */ +#endif }; static LIST_HEAD(all_pmu_pvt); @@ -2464,7 +2454,7 @@ pmu_open(struct inode *inode, struct file *file) spin_lock_irqsave(&all_pvt_lock, flags); #if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT) pp->backlight_locker = 0; -#endif /* defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT) */ +#endif list_add(&pp->list, &all_pmu_pvt); spin_unlock_irqrestore(&all_pvt_lock, flags); file->private_data = pp; @@ -2559,13 +2549,12 @@ pmu_release(struct inode *inode, struct file *file) spin_lock_irqsave(&all_pvt_lock, flags); list_del(&pp->list); spin_unlock_irqrestore(&all_pvt_lock, flags); + #if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT) - if (pp->backlight_locker) { - spin_lock_irqsave(&pmu_lock, flags); - disable_kernel_backlight--; - spin_unlock_irqrestore(&pmu_lock, flags); - } -#endif /* defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT) */ + if (pp->backlight_locker) + pmac_backlight_enable(); +#endif + kfree(pp); } unlock_kernel(); @@ -2642,18 +2631,18 @@ pmu_ioctl(struct inode * inode, struct file *filp, #ifdef CONFIG_INPUT_ADBHID case PMU_IOC_GRAB_BACKLIGHT: { struct pmu_private *pp = filp->private_data; - unsigned long flags; if (pp->backlight_locker) return 0; + pp->backlight_locker = 1; - spin_lock_irqsave(&pmu_lock, flags); - disable_kernel_backlight++; - spin_unlock_irqrestore(&pmu_lock, flags); + pmac_backlight_disable(); + return 0; } #endif /* CONFIG_INPUT_ADBHID */ #endif /* CONFIG_PMAC_BACKLIGHT_LEGACY */ + case PMU_IOC_GET_MODEL: return put_user(pmu_kind, argp); case PMU_IOC_HAS_ADB: -- cgit v1.2.2 From d565dd3b0824b67a8442df4de83cc44f7c726fc9 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 31 Aug 2006 21:27:49 -0700 Subject: [PATCH] powerpc: More via-pmu backlight fixes The via-pmu backlight code (introduced in 2.6.18) has various design issues causing crashes on machines using it like the old Wallstreet powerbook (Michael, the author, never managed to test on these and I just got my hand on one of those old beasts). This fixes them by no longer trying to hijack the backlight device of the frontmost framebuffer (causing that framebuffer to crash) but having it's own local bits instead. Might look weird but it's better that way on those old machines, at least as a last-minute fix for 2.6.18. We might rework the whole thing later. This patch also changes the way it gets notified of sleep and wakeup in order to properly shut the backlight down on sleep and bring it back on wakeup. Signed-off-by: Benjamin Herrenschmidt Cc: "Antonino A. Daplas" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/macintosh/via-pmu-backlight.c | 95 +++++++++++++++++------------------ drivers/macintosh/via-pmu.c | 12 +++++ 2 files changed, 57 insertions(+), 50 deletions(-) (limited to 'drivers/macintosh') diff --git a/drivers/macintosh/via-pmu-backlight.c b/drivers/macintosh/via-pmu-backlight.c index d3f8d75bcbb4..4397fac55ba0 100644 --- a/drivers/macintosh/via-pmu-backlight.c +++ b/drivers/macintosh/via-pmu-backlight.c @@ -18,17 +18,48 @@ static struct backlight_properties pmu_backlight_data; static spinlock_t pmu_backlight_lock; static int sleeping; +static u8 bl_curve[FB_BACKLIGHT_LEVELS]; -static int pmu_backlight_get_level_brightness(struct fb_info *info, - int level) +static void pmu_backlight_init_curve(u8 off, u8 min, u8 max) +{ + unsigned int i, flat, count, range = (max - min); + + bl_curve[0] = off; + + for (flat = 1; flat < (FB_BACKLIGHT_LEVELS / 16); ++flat) + bl_curve[flat] = min; + + count = FB_BACKLIGHT_LEVELS * 15 / 16; + for (i = 0; i < count; ++i) + bl_curve[flat + i] = min + (range * (i + 1) / count); +} + +static int pmu_backlight_curve_lookup(int value) +{ + int level = (FB_BACKLIGHT_LEVELS - 1); + int i, max = 0; + + /* Look for biggest value */ + for (i = 0; i < FB_BACKLIGHT_LEVELS; i++) + max = max((int)bl_curve[i], max); + + /* Look for nearest value */ + for (i = 0; i < FB_BACKLIGHT_LEVELS; i++) { + int diff = abs(bl_curve[i] - value); + if (diff < max) { + max = diff; + level = i; + } + } + return level; +} + +static int pmu_backlight_get_level_brightness(int level) { int pmulevel; /* Get and convert the value */ - mutex_lock(&info->bl_mutex); - pmulevel = info->bl_curve[level] * FB_BACKLIGHT_MAX / MAX_PMU_LEVEL; - mutex_unlock(&info->bl_mutex); - + pmulevel = bl_curve[level] * FB_BACKLIGHT_MAX / MAX_PMU_LEVEL; if (pmulevel < 0) pmulevel = 0; else if (pmulevel > MAX_PMU_LEVEL) @@ -39,7 +70,6 @@ static int pmu_backlight_get_level_brightness(struct fb_info *info, static int pmu_backlight_update_status(struct backlight_device *bd) { - struct fb_info *info = class_get_devdata(&bd->class_dev); struct adb_request req; unsigned long flags; int level = bd->props->brightness; @@ -55,7 +85,7 @@ static int pmu_backlight_update_status(struct backlight_device *bd) level = 0; if (level > 0) { - int pmulevel = pmu_backlight_get_level_brightness(info, level); + int pmulevel = pmu_backlight_get_level_brightness(level); pmu_request(&req, NULL, 2, PMU_BACKLIGHT_BRIGHT, pmulevel); pmu_wait_complete(&req); @@ -88,35 +118,19 @@ static struct backlight_properties pmu_backlight_data = { }; #ifdef CONFIG_PM -static int pmu_backlight_sleep_call(struct pmu_sleep_notifier *self, int when) +void pmu_backlight_set_sleep(int sleep) { unsigned long flags; spin_lock_irqsave(&pmu_backlight_lock, flags); - - switch (when) { - case PBOOK_SLEEP_REQUEST: - sleeping = 1; - break; - case PBOOK_WAKE: - sleeping = 0; - break; - } - + sleeping = sleep; spin_unlock_irqrestore(&pmu_backlight_lock, flags); - - return PBOOK_SLEEP_OK; } - -static struct pmu_sleep_notifier pmu_backlight_sleep_notif = { - .notifier_call = pmu_backlight_sleep_call, -}; -#endif +#endif /* CONFIG_PM */ void __init pmu_backlight_init() { struct backlight_device *bd; - struct fb_info *info; char name[10]; int level, autosave; @@ -131,27 +145,14 @@ void __init pmu_backlight_init() !machine_is_compatible("PowerBook1,1")) return; - /* Actually, this is a hack, but I don't know of a better way - * to get the first framebuffer device. - */ - info = registered_fb[0]; - if (!info) { - printk("pmubl: No framebuffer found\n"); - goto error; - } - - snprintf(name, sizeof(name), "pmubl%d", info->node); + snprintf(name, sizeof(name), "pmubl"); - bd = backlight_device_register(name, info, &pmu_backlight_data); + bd = backlight_device_register(name, NULL, &pmu_backlight_data); if (IS_ERR(bd)) { printk("pmubl: Backlight registration failed\n"); goto error; } - - mutex_lock(&info->bl_mutex); - info->bl_dev = bd; - fb_bl_default_curve(info, 0x7F, 0x46, 0x0E); - mutex_unlock(&info->bl_mutex); + pmu_backlight_init_curve(0x7F, 0x46, 0x0E); level = pmu_backlight_data.max_brightness; @@ -161,11 +162,9 @@ void __init pmu_backlight_init() pmu_request(&req, NULL, 2, 0xd9, 0); pmu_wait_complete(&req); - mutex_lock(&info->bl_mutex); - level = pmac_backlight_curve_lookup(info, + level = pmu_backlight_curve_lookup( (req.reply[0] >> 4) * pmu_backlight_data.max_brightness / 15); - mutex_unlock(&info->bl_mutex); } up(&bd->sem); @@ -179,10 +178,6 @@ void __init pmu_backlight_init() pmac_backlight = bd; mutex_unlock(&pmac_backlight_mutex); -#ifdef CONFIG_PM - pmu_register_sleep_notifier(&pmu_backlight_sleep_notif); -#endif - printk("pmubl: Backlight initialized (%s)\n", name); return; diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c index ea386801e215..14610a63f580 100644 --- a/drivers/macintosh/via-pmu.c +++ b/drivers/macintosh/via-pmu.c @@ -1995,6 +1995,8 @@ restore_via_state(void) out_8(&via[IER], IER_SET | SR_INT | CB1_INT); } +extern void pmu_backlight_set_sleep(int sleep); + static int pmac_suspend_devices(void) { @@ -2032,6 +2034,11 @@ pmac_suspend_devices(void) return -EBUSY; } +#ifdef CONFIG_PMAC_BACKLIGHT + /* Tell backlight code not to muck around with the chip anymore */ + pmu_backlight_set_sleep(1); +#endif + /* Call platform functions marked "on sleep" */ pmac_pfunc_i2c_suspend(); pmac_pfunc_base_suspend(); @@ -2090,6 +2097,11 @@ pmac_wakeup_devices(void) { mdelay(100); +#ifdef CONFIG_PMAC_BACKLIGHT + /* Tell backlight code it can use the chip again */ + pmu_backlight_set_sleep(0); +#endif + /* Power back up system devices (including the PIC) */ device_power_up(); -- cgit v1.2.2 From a930363881c225fb52824145d1ba8f1a8c447dd8 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 31 Aug 2006 21:27:54 -0700 Subject: [PATCH] backlight last round of fixes Fix some more problems (inverted use of semaphores in some places). He also moved my checks into within the protected section which is better. Signed-off-by: Michael Hanselmann Signed-off-by: Benjamin Herrenschmidt Cc: "Antonino A. Daplas" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/macintosh/via-pmu-backlight.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/macintosh') diff --git a/drivers/macintosh/via-pmu-backlight.c b/drivers/macintosh/via-pmu-backlight.c index 4397fac55ba0..a82f313d9dc9 100644 --- a/drivers/macintosh/via-pmu-backlight.c +++ b/drivers/macintosh/via-pmu-backlight.c @@ -167,11 +167,11 @@ void __init pmu_backlight_init() pmu_backlight_data.max_brightness / 15); } - up(&bd->sem); + down(&bd->sem); bd->props->brightness = level; bd->props->power = FB_BLANK_UNBLANK; bd->props->update_status(bd); - down(&bd->sem); + up(&bd->sem); mutex_lock(&pmac_backlight_mutex); if (!pmac_backlight) -- cgit v1.2.2