From fd1b6c4a693c9cac59375ffb36ffe5d7c079037c Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Wed, 13 Jul 2011 09:19:16 -0700 Subject: IB/srp: Avoid duplicate devices from LUN scan SCSI scanning of a channel:id:lun triplet in Linux works as follows (function scsi_scan_target() in drivers/scsi/scsi_scan.c): - If lun == SCAN_WILD_CARD, send a REPORT LUNS command to the target and process the result. - If lun != SCAN_WILD_CARD, send an INQUIRY command to the LUN corresponding to the specified channel:id:lun triplet to verify whether the LUN exists. So a SCSI driver must either take the channel and target id values in account in its quecommand() function or it should declare that it only supports one channel and one target id. Currently the ib_srp driver does neither. As a result scanning the SCSI bus via e.g. rescan-scsi-bus.sh causes many duplicate SCSI devices to be created. For each 0:0:L device, several duplicates are created with the same LUN number and with (C:I) != (0:0). Fix this by declaring that the ib_srp driver only supports one channel and one target id. Signed-off-by: Bart Van Assche Cc: Acked-by: David Dillow Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/srp/ib_srp.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/infiniband') diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c index ee165fdcb596..7d5109bbd1ad 100644 --- a/drivers/infiniband/ulp/srp/ib_srp.c +++ b/drivers/infiniband/ulp/srp/ib_srp.c @@ -2127,6 +2127,8 @@ static ssize_t srp_create_target(struct device *dev, return -ENOMEM; target_host->transportt = ib_srp_transport_template; + target_host->max_channel = 0; + target_host->max_id = 1; target_host->max_lun = SRP_MAX_LUN; target_host->max_cmd_len = sizeof ((struct srp_cmd *) (void *) 0L)->cdb; -- cgit v1.2.2