From 616299afcebfb2228f45a95aac7e63704c3733fc Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sun, 1 May 2005 08:58:41 -0700 Subject: [PATCH] ppc32: Fix IDE related crash on wakeup I noticed an occasional crash on wakeup from sleep on my powerbook (strangly never happened before, probably timing related) that appears to be due to a dangling interrupt while the chip is put to sleep and beeing reset on wakeup. This patch fixes is by disabling the irq in the ide pmac driver while asleep and only re-enable it after the chip has been fully reset. This is safe to do so as the interrupt of these apple IDE cells is never shared. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/ide/ppc/pmac.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers/ide/ppc') diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index 6dc273a81327..569f16767442 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -1204,6 +1204,8 @@ pmac_ide_do_suspend(ide_hwif_t *hwif) } #endif /* CONFIG_BLK_DEV_IDE_PMAC_BLINK */ + disable_irq(pmif->irq); + /* The media bay will handle itself just fine */ if (pmif->mediabay) return 0; @@ -1236,7 +1238,6 @@ pmac_ide_do_resume(ide_hwif_t *hwif) ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, pmif->node, pmif->aapl_bus_id, 1); msleep(10); ppc_md.feature_call(PMAC_FTR_IDE_RESET, pmif->node, pmif->aapl_bus_id, 0); - msleep(jiffies_to_msecs(IDE_WAKEUP_DELAY)); /* Kauai has it different */ if (pmif->kauai_fcr) { @@ -1244,11 +1245,15 @@ pmac_ide_do_resume(ide_hwif_t *hwif) fcr |= KAUAI_FCR_UATA_RESET_N | KAUAI_FCR_UATA_ENABLE; writel(fcr, pmif->kauai_fcr); } + + msleep(jiffies_to_msecs(IDE_WAKEUP_DELAY)); } /* Sanitize drive timings */ sanitize_timings(pmif); + enable_irq(pmif->irq); + return 0; } -- cgit v1.2.2