From 175f354b752ca04cad65588dc2c4e648003b8504 Mon Sep 17 00:00:00 2001 From: Paolo Ciarrocchi Date: Sat, 26 Apr 2008 17:36:42 +0200 Subject: IDE: Coding Style fixes to drivers/ide/pci/cy82c693.c Before: total: 34 errors, 14 warnings, 456 lines checked After: total: 0 errors, 8 warnings, 456 lines checked [bart: md5sum checked] Signed-off-by: Paolo Ciarrocchi Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/cy82c693.c | 74 +++++++++++++++++++++++----------------------- 1 file changed, 37 insertions(+), 37 deletions(-) (limited to 'drivers/ide/pci/cy82c693.c') diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c index 833fa4de3081..08eab7e7f051 100644 --- a/drivers/ide/pci/cy82c693.c +++ b/drivers/ide/pci/cy82c693.c @@ -6,7 +6,7 @@ * * The CY82C693 chipset is used on Digital's PC-Alpha 164SX boards. * Writing the driver was quite simple, since most of the job is - * done by the generic pci-ide support. + * done by the generic pci-ide support. * The hard part was finding the CY82C693's datasheet on Cypress's * web page :-(. But Altavista solved this problem :-). * @@ -15,12 +15,12 @@ * - I recently got a 16.8G IBM DTTA, so I was able to test it with * a large and fast disk - the results look great, so I'd say the * driver is working fine :-) - * hdparm -t reports 8.17 MB/sec at about 6% CPU usage for the DTTA - * - this is my first linux driver, so there's probably a lot of room + * hdparm -t reports 8.17 MB/sec at about 6% CPU usage for the DTTA + * - this is my first linux driver, so there's probably a lot of room * for optimizations and bug fixing, so feel free to do it. * - use idebus=xx parameter to set PCI bus speed - needed to calc * timings for PIO modes (default will be 40) - * - if using PIO mode it's a good idea to set the PIO mode and + * - if using PIO mode it's a good idea to set the PIO mode and * 32-bit I/O support (if possible), e.g. hdparm -p2 -c1 /dev/hda * - I had some problems with my IBM DHEA with PIO modes < 2 * (lost interrupts) ????? @@ -110,11 +110,11 @@ typedef struct pio_clocks_s { * calc clocks using bus_speed * returns (rounded up) time in bus clocks for time in ns */ -static int calc_clk (int time, int bus_speed) +static int calc_clk(int time, int bus_speed) { int clocks; - clocks = (time*bus_speed+999)/1000 -1; + clocks = (time*bus_speed+999)/1000 - 1; if (clocks < 0) clocks = 0; @@ -132,8 +132,8 @@ static int calc_clk (int time, int bus_speed) * NOTE: for mode 0,1 and 2 drives 8-bit IDE command control registers are used * for mode 3 and 4 drives 8 and 16-bit timings are the same * - */ -static void compute_clocks (u8 pio, pio_clocks_t *p_pclk) + */ +static void compute_clocks(u8 pio, pio_clocks_t *p_pclk) { int clk1, clk2; int bus_speed = system_bus_clock(); /* get speed of PCI bus */ @@ -158,7 +158,7 @@ static void compute_clocks (u8 pio, pio_clocks_t *p_pclk) clk1 = (clk1<<4)|clk2; /* combine active and recovery clocks */ /* note: we use the same values for 16bit IOR and IOW - * those are all the same, since I don't have other + * those are all the same, since I don't have other * timings than those from ide-lib.c */ @@ -186,7 +186,7 @@ static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode) outb(index, CY82_INDEX_PORT); data = inb(CY82_DATA_PORT); - printk (KERN_INFO "%s (ch=%d, dev=%d): DMA mode is %d (single=%d)\n", + printk(KERN_INFO "%s (ch=%d, dev=%d): DMA mode is %d (single=%d)\n", drive->name, HWIF(drive)->channel, drive->select.b.unit, (data&0x3), ((data>>2)&1)); #endif /* CY82C693_DEBUG_LOGS */ @@ -202,7 +202,7 @@ static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode) mode & 3, single); #endif /* CY82C693_DEBUG_INFO */ - /* + /* * note: below we set the value for Bus Master IDE TimeOut Register * I'm not absolutly sure what this does, but it solved my problem * with IDE DMA and sound, so I now can play sound and work with @@ -216,8 +216,8 @@ static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode) outb(CY82_INDEX_TIMEOUT, CY82_INDEX_PORT); outb(data, CY82_DATA_PORT); -#if CY82C693_DEBUG_INFO - printk (KERN_INFO "%s: Set IDE Bus Master TimeOut Register to 0x%X\n", +#if CY82C693_DEBUG_INFO + printk(KERN_INFO "%s: Set IDE Bus Master TimeOut Register to 0x%X\n", drive->name, data); #endif /* CY82C693_DEBUG_INFO */ } @@ -242,14 +242,14 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio) #if CY82C693_DEBUG_LOGS /* for debug let's show the register values */ - - if (drive->select.b.unit == 0) { + + if (drive->select.b.unit == 0) { /* - * get master drive registers + * get master drive registers * address setup control register * is 32 bit !!! - */ - pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl); + */ + pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl); addrCtrl &= 0x0F; /* now let's get the remaining registers */ @@ -261,7 +261,7 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio) * set slave drive registers * address setup control register * is 32 bit !!! - */ + */ pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl); addrCtrl &= 0xF0; @@ -288,9 +288,9 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio) * set master drive * address setup control register * is 32 bit !!! - */ + */ pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl); - + addrCtrl &= (~0xF); addrCtrl |= (unsigned int)pclk.address_time; pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl); @@ -299,14 +299,14 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio) pci_write_config_byte(dev, CY82_IDE_MASTER_IOR, pclk.time_16r); pci_write_config_byte(dev, CY82_IDE_MASTER_IOW, pclk.time_16w); pci_write_config_byte(dev, CY82_IDE_MASTER_8BIT, pclk.time_8); - + addrCtrl &= 0xF; } else { /* * set slave drive * address setup control register * is 32 bit !!! - */ + */ pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl); addrCtrl &= (~0xF0); @@ -320,7 +320,7 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio) addrCtrl >>= 4; addrCtrl &= 0xF; - } + } #if CY82C693_DEBUG_INFO printk(KERN_INFO "%s (ch=%d, dev=%d): set PIO timing to " @@ -340,41 +340,41 @@ static unsigned int __devinit init_chipset_cy82c693(struct pci_dev *dev, const c #ifdef CY82C693_SETDMA_CLOCK u8 data = 0; -#endif /* CY82C693_SETDMA_CLOCK */ +#endif /* CY82C693_SETDMA_CLOCK */ /* write info about this verion of the driver */ printk(KERN_INFO CY82_VERSION "\n"); #ifdef CY82C693_SETDMA_CLOCK /* okay let's set the DMA clock speed */ - - outb(CY82_INDEX_CTRLREG1, CY82_INDEX_PORT); - data = inb(CY82_DATA_PORT); + + outb(CY82_INDEX_CTRLREG1, CY82_INDEX_PORT); + data = inb(CY82_DATA_PORT); #if CY82C693_DEBUG_INFO printk(KERN_INFO "%s: Peripheral Configuration Register: 0x%X\n", name, data); #endif /* CY82C693_DEBUG_INFO */ - /* + /* * for some reason sometimes the DMA controller * speed is set to ATCLK/2 ???? - we fix this here - * + * * note: i don't know what causes this strange behaviour, * but even changing the dma speed doesn't solve it :-( - * the ide performance is still only half the normal speed - * + * the ide performance is still only half the normal speed + * * if anybody knows what goes wrong with my machine, please * let me know - ASK - */ + */ data |= 0x03; - outb(CY82_INDEX_CTRLREG1, CY82_INDEX_PORT); - outb(data, CY82_DATA_PORT); + outb(CY82_INDEX_CTRLREG1, CY82_INDEX_PORT); + outb(data, CY82_DATA_PORT); #if CY82C693_DEBUG_INFO - printk (KERN_INFO "%s: New Peripheral Configuration Register: 0x%X\n", + printk(KERN_INFO "%s: New Peripheral Configuration Register: 0x%X\n", name, data); #endif /* CY82C693_DEBUG_INFO */ @@ -423,7 +423,7 @@ static int __devinit cy82c693_init_one(struct pci_dev *dev, const struct pci_dev /* CY82C693 is more than only a IDE controller. Function 1 is primary IDE channel, function 2 - secondary. */ - if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && + if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && PCI_FUNC(dev->devfn) == 1) { dev2 = pci_get_slot(dev->bus, dev->devfn + 1); ret = ide_setup_pci_devices(dev, dev2, &cy82c693_chipset); -- cgit v1.2.2