From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/ide/pci/alim15x3.c | 913 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 913 insertions(+) create mode 100644 drivers/ide/pci/alim15x3.c (limited to 'drivers/ide/pci/alim15x3.c') diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c new file mode 100644 index 000000000000..67efb38a9f6c --- /dev/null +++ b/drivers/ide/pci/alim15x3.c @@ -0,0 +1,913 @@ +/* + * linux/drivers/ide/pci/alim15x3.c Version 0.17 2003/01/02 + * + * Copyright (C) 1998-2000 Michel Aubry, Maintainer + * Copyright (C) 1998-2000 Andrzej Krzysztofowicz, Maintainer + * Copyright (C) 1999-2000 CJ, cjtsai@ali.com.tw, Maintainer + * + * Copyright (C) 1998-2000 Andre Hedrick (andre@linux-ide.org) + * May be copied or modified under the terms of the GNU General Public License + * Copyright (C) 2002 Alan Cox + * ALi (now ULi M5228) support by Clear Zhang + * + * (U)DMA capable version of ali 1533/1543(C), 1535(D) + * + ********************************************************************** + * 9/7/99 --Parts from the above author are included and need to be + * converted into standard interface, once I finish the thought. + * + * Recent changes + * Don't use LBA48 mode on ALi <= 0xC4 + * Don't poke 0x79 with a non ALi northbridge + * Don't flip undefined bits on newer chipsets (fix Fujitsu laptop hang) + * Allow UDMA6 on revisions > 0xC4 + * + * Documentation + * Chipset documentation available under NDA only + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define DISPLAY_ALI_TIMINGS + +/* + * ALi devices are not plug in. Otherwise these static values would + * need to go. They ought to go away anyway + */ + +static u8 m5229_revision; +static u8 chip_is_1543c_e; +static struct pci_dev *isa_dev; + +#if defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_PROC_FS) +#include +#include + +static u8 ali_proc = 0; + +static struct pci_dev *bmide_dev; + +static char *fifo[4] = { + "FIFO Off", + "FIFO On ", + "DMA mode", + "PIO mode" }; + +static char *udmaT[8] = { + "1.5T", + " 2T", + "2.5T", + " 3T", + "3.5T", + " 4T", + " 6T", + " 8T" +}; + +static char *channel_status[8] = { + "OK ", + "busy ", + "DRQ ", + "DRQ busy ", + "error ", + "error busy ", + "error DRQ ", + "error DRQ busy" +}; + +/** + * ali_get_info - generate proc file for ALi IDE + * @buffer: buffer to fill + * @addr: address of user start in buffer + * @offset: offset into 'file' + * @count: buffer count + * + * Walks the Ali devices and outputs summary data on the tuning and + * anything else that will help with debugging + */ + +static int ali_get_info (char *buffer, char **addr, off_t offset, int count) +{ + unsigned long bibma; + u8 reg53h, reg5xh, reg5yh, reg5xh1, reg5yh1, c0, c1, rev, tmp; + char *q, *p = buffer; + + /* fetch rev. */ + pci_read_config_byte(bmide_dev, 0x08, &rev); + if (rev >= 0xc1) /* M1543C or newer */ + udmaT[7] = " ???"; + else + fifo[3] = " ??? "; + + /* first fetch bibma: */ + + bibma = pci_resource_start(bmide_dev, 4); + + /* + * at that point bibma+0x2 et bibma+0xa are byte + * registers to investigate: + */ + c0 = inb(bibma + 0x02); + c1 = inb(bibma + 0x0a); + + p += sprintf(p, + "\n Ali M15x3 Chipset.\n"); + p += sprintf(p, + " ------------------\n"); + pci_read_config_byte(bmide_dev, 0x78, ®53h); + p += sprintf(p, "PCI Clock: %d.\n", reg53h); + + pci_read_config_byte(bmide_dev, 0x53, ®53h); + p += sprintf(p, + "CD_ROM FIFO:%s, CD_ROM DMA:%s\n", + (reg53h & 0x02) ? "Yes" : "No ", + (reg53h & 0x01) ? "Yes" : "No " ); + pci_read_config_byte(bmide_dev, 0x74, ®53h); + p += sprintf(p, + "FIFO Status: contains %d Words, runs%s%s\n\n", + (reg53h & 0x3f), + (reg53h & 0x40) ? " OVERWR" : "", + (reg53h & 0x80) ? " OVERRD." : "." ); + + p += sprintf(p, + "-------------------primary channel" + "-------------------secondary channel" + "---------\n\n"); + + pci_read_config_byte(bmide_dev, 0x09, ®53h); + p += sprintf(p, + "channel status: %s" + " %s\n", + (reg53h & 0x20) ? "On " : "Off", + (reg53h & 0x10) ? "On " : "Off" ); + + p += sprintf(p, + "both channels togth: %s" + " %s\n", + (c0&0x80) ? "No " : "Yes", + (c1&0x80) ? "No " : "Yes" ); + + pci_read_config_byte(bmide_dev, 0x76, ®53h); + p += sprintf(p, + "Channel state: %s %s\n", + channel_status[reg53h & 0x07], + channel_status[(reg53h & 0x70) >> 4] ); + + pci_read_config_byte(bmide_dev, 0x58, ®5xh); + pci_read_config_byte(bmide_dev, 0x5c, ®5yh); + p += sprintf(p, + "Add. Setup Timing: %dT" + " %dT\n", + (reg5xh & 0x07) ? (reg5xh & 0x07) : 8, + (reg5yh & 0x07) ? (reg5yh & 0x07) : 8 ); + + pci_read_config_byte(bmide_dev, 0x59, ®5xh); + pci_read_config_byte(bmide_dev, 0x5d, ®5yh); + p += sprintf(p, + "Command Act. Count: %dT" + " %dT\n" + "Command Rec. Count: %dT" + " %dT\n\n", + (reg5xh & 0x70) ? ((reg5xh & 0x70) >> 4) : 8, + (reg5yh & 0x70) ? ((reg5yh & 0x70) >> 4) : 8, + (reg5xh & 0x0f) ? (reg5xh & 0x0f) : 16, + (reg5yh & 0x0f) ? (reg5yh & 0x0f) : 16 ); + + p += sprintf(p, + "----------------drive0-----------drive1" + "------------drive0-----------drive1------\n\n"); + p += sprintf(p, + "DMA enabled: %s %s" + " %s %s\n", + (c0&0x20) ? "Yes" : "No ", + (c0&0x40) ? "Yes" : "No ", + (c1&0x20) ? "Yes" : "No ", + (c1&0x40) ? "Yes" : "No " ); + + pci_read_config_byte(bmide_dev, 0x54, ®5xh); + pci_read_config_byte(bmide_dev, 0x55, ®5yh); + q = "FIFO threshold: %2d Words %2d Words" + " %2d Words %2d Words\n"; + if (rev < 0xc1) { + if ((rev == 0x20) && + (pci_read_config_byte(bmide_dev, 0x4f, &tmp), (tmp &= 0x20))) { + p += sprintf(p, q, 8, 8, 8, 8); + } else { + p += sprintf(p, q, + (reg5xh & 0x03) + 12, + ((reg5xh & 0x30)>>4) + 12, + (reg5yh & 0x03) + 12, + ((reg5yh & 0x30)>>4) + 12 ); + } + } else { + int t1 = (tmp = (reg5xh & 0x03)) ? (tmp << 3) : 4; + int t2 = (tmp = ((reg5xh & 0x30)>>4)) ? (tmp << 3) : 4; + int t3 = (tmp = (reg5yh & 0x03)) ? (tmp << 3) : 4; + int t4 = (tmp = ((reg5yh & 0x30)>>4)) ? (tmp << 3) : 4; + p += sprintf(p, q, t1, t2, t3, t4); + } + +#if 0 + p += sprintf(p, + "FIFO threshold: %2d Words %2d Words" + " %2d Words %2d Words\n", + (reg5xh & 0x03) + 12, + ((reg5xh & 0x30)>>4) + 12, + (reg5yh & 0x03) + 12, + ((reg5yh & 0x30)>>4) + 12 ); +#endif + + p += sprintf(p, + "FIFO mode: %s %s %s %s\n", + fifo[((reg5xh & 0x0c) >> 2)], + fifo[((reg5xh & 0xc0) >> 6)], + fifo[((reg5yh & 0x0c) >> 2)], + fifo[((reg5yh & 0xc0) >> 6)] ); + + pci_read_config_byte(bmide_dev, 0x5a, ®5xh); + pci_read_config_byte(bmide_dev, 0x5b, ®5xh1); + pci_read_config_byte(bmide_dev, 0x5e, ®5yh); + pci_read_config_byte(bmide_dev, 0x5f, ®5yh1); + + p += sprintf(p,/* + "------------------drive0-----------drive1" + "------------drive0-----------drive1------\n")*/ + "Dt RW act. Cnt %2dT %2dT" + " %2dT %2dT\n" + "Dt RW rec. Cnt %2dT %2dT" + " %2dT %2dT\n\n", + (reg5xh & 0x70) ? ((reg5xh & 0x70) >> 4) : 8, + (reg5xh1 & 0x70) ? ((reg5xh1 & 0x70) >> 4) : 8, + (reg5yh & 0x70) ? ((reg5yh & 0x70) >> 4) : 8, + (reg5yh1 & 0x70) ? ((reg5yh1 & 0x70) >> 4) : 8, + (reg5xh & 0x0f) ? (reg5xh & 0x0f) : 16, + (reg5xh1 & 0x0f) ? (reg5xh1 & 0x0f) : 16, + (reg5yh & 0x0f) ? (reg5yh & 0x0f) : 16, + (reg5yh1 & 0x0f) ? (reg5yh1 & 0x0f) : 16 ); + + p += sprintf(p, + "-----------------------------------UDMA Timings" + "--------------------------------\n\n"); + + pci_read_config_byte(bmide_dev, 0x56, ®5xh); + pci_read_config_byte(bmide_dev, 0x57, ®5yh); + p += sprintf(p, + "UDMA: %s %s" + " %s %s\n" + "UDMA timings: %s %s" + " %s %s\n\n", + (reg5xh & 0x08) ? "OK" : "No", + (reg5xh & 0x80) ? "OK" : "No", + (reg5yh & 0x08) ? "OK" : "No", + (reg5yh & 0x80) ? "OK" : "No", + udmaT[(reg5xh & 0x07)], + udmaT[(reg5xh & 0x70) >> 4], + udmaT[reg5yh & 0x07], + udmaT[(reg5yh & 0x70) >> 4] ); + + return p-buffer; /* => must be less than 4k! */ +} +#endif /* defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_PROC_FS) */ + +/** + * ali15x3_tune_drive - set up a drive + * @drive: drive to tune + * @pio: unused + * + * Select the best PIO timing for the drive in question. Then + * program the controller for this drive set up + */ + +static void ali15x3_tune_drive (ide_drive_t *drive, u8 pio) +{ + ide_pio_data_t d; + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + int s_time, a_time, c_time; + u8 s_clc, a_clc, r_clc; + unsigned long flags; + int bus_speed = system_bus_clock(); + int port = hwif->channel ? 0x5c : 0x58; + int portFIFO = hwif->channel ? 0x55 : 0x54; + u8 cd_dma_fifo = 0; + int unit = drive->select.b.unit & 1; + + pio = ide_get_best_pio_mode(drive, pio, 5, &d); + s_time = ide_pio_timings[pio].setup_time; + a_time = ide_pio_timings[pio].active_time; + if ((s_clc = (s_time * bus_speed + 999) / 1000) >= 8) + s_clc = 0; + if ((a_clc = (a_time * bus_speed + 999) / 1000) >= 8) + a_clc = 0; + c_time = ide_pio_timings[pio].cycle_time; + +#if 0 + if ((r_clc = ((c_time - s_time - a_time) * bus_speed + 999) / 1000) >= 16) + r_clc = 0; +#endif + + if (!(r_clc = (c_time * bus_speed + 999) / 1000 - a_clc - s_clc)) { + r_clc = 1; + } else { + if (r_clc >= 16) + r_clc = 0; + } + local_irq_save(flags); + + /* + * PIO mode => ATA FIFO on, ATAPI FIFO off + */ + pci_read_config_byte(dev, portFIFO, &cd_dma_fifo); + if (drive->media==ide_disk) { + if (unit) { + pci_write_config_byte(dev, portFIFO, (cd_dma_fifo & 0x0F) | 0x50); + } else { + pci_write_config_byte(dev, portFIFO, (cd_dma_fifo & 0xF0) | 0x05); + } + } else { + if (unit) { + pci_write_config_byte(dev, portFIFO, cd_dma_fifo & 0x0F); + } else { + pci_write_config_byte(dev, portFIFO, cd_dma_fifo & 0xF0); + } + } + + pci_write_config_byte(dev, port, s_clc); + pci_write_config_byte(dev, port+drive->select.b.unit+2, (a_clc << 4) | r_clc); + local_irq_restore(flags); + + /* + * setup active rec + * { 70, 165, 365 }, PIO Mode 0 + * { 50, 125, 208 }, PIO Mode 1 + * { 30, 100, 110 }, PIO Mode 2 + * { 30, 80, 70 }, PIO Mode 3 with IORDY + * { 25, 70, 25 }, PIO Mode 4 with IORDY ns + * { 20, 50, 30 } PIO Mode 5 with IORDY (nonstandard) + */ + +} + +/** + * ali15x3_can_ultra - check for ultra DMA support + * @drive: drive to do the check + * + * Check the drive and controller revisions. Return 0 if UDMA is + * not available, or 1 if UDMA can be used. The actual rules for + * the ALi are + * No UDMA on revisions <= 0x20 + * Disk only for revisions < 0xC2 + * Not WDC drives for revisions < 0xC2 + * + * FIXME: WDC ifdef needs to die + */ + +static u8 ali15x3_can_ultra (ide_drive_t *drive) +{ +#ifndef CONFIG_WDC_ALI15X3 + struct hd_driveid *id = drive->id; +#endif /* CONFIG_WDC_ALI15X3 */ + + if (m5229_revision <= 0x20) { + return 0; + } else if ((m5229_revision < 0xC2) && +#ifndef CONFIG_WDC_ALI15X3 + ((chip_is_1543c_e && strstr(id->model, "WDC ")) || + (drive->media!=ide_disk))) { +#else /* CONFIG_WDC_ALI15X3 */ + (drive->media!=ide_disk)) { +#endif /* CONFIG_WDC_ALI15X3 */ + return 0; + } else { + return 1; + } +} + +/** + * ali15x3_ratemask - generate DMA mode list + * @drive: drive to compute against + * + * Generate a list of the available DMA modes for the drive. + * FIXME: this function contains lots of bogus masking we can dump + * + * Return the highest available mode (UDMA33, UDMA66, UDMA100,..) + */ + +static u8 ali15x3_ratemask (ide_drive_t *drive) +{ + u8 mode = 0, can_ultra = ali15x3_can_ultra(drive); + + if (m5229_revision > 0xC4 && can_ultra) { + mode = 4; + } else if (m5229_revision == 0xC4 && can_ultra) { + mode = 3; + } else if (m5229_revision >= 0xC2 && can_ultra) { + mode = 2; + } else if (can_ultra) { + return 1; + } else { + return 0; + } + + /* + * If the drive sees no suitable cable then UDMA 33 + * is the highest permitted mode + */ + + if (!eighty_ninty_three(drive)) + mode = min(mode, (u8)1); + return mode; +} + +/** + * ali15x3_tune_chipset - set up chiset for new speed + * @drive: drive to configure for + * @xferspeed: desired speed + * + * Configure the hardware for the desired IDE transfer mode. + * We also do the needed drive configuration through helpers + */ + +static int ali15x3_tune_chipset (ide_drive_t *drive, u8 xferspeed) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = hwif->pci_dev; + u8 speed = ide_rate_filter(ali15x3_ratemask(drive), xferspeed); + u8 speed1 = speed; + u8 unit = (drive->select.b.unit & 0x01); + u8 tmpbyte = 0x00; + int m5229_udma = (hwif->channel) ? 0x57 : 0x56; + + if (speed == XFER_UDMA_6) + speed1 = 0x47; + + if (speed < XFER_UDMA_0) { + u8 ultra_enable = (unit) ? 0x7f : 0xf7; + /* + * clear "ultra enable" bit + */ + pci_read_config_byte(dev, m5229_udma, &tmpbyte); + tmpbyte &= ultra_enable; + pci_write_config_byte(dev, m5229_udma, tmpbyte); + + if (speed < XFER_SW_DMA_0) + ali15x3_tune_drive(drive, speed); + } else { + pci_read_config_byte(dev, m5229_udma, &tmpbyte); + tmpbyte &= (0x0f << ((1-unit) << 2)); + /* + * enable ultra dma and set timing + */ + tmpbyte |= ((0x08 | ((4-speed1)&0x07)) << (unit << 2)); + pci_write_config_byte(dev, m5229_udma, tmpbyte); + if (speed >= XFER_UDMA_3) { + pci_read_config_byte(dev, 0x4b, &tmpbyte); + tmpbyte |= 1; + pci_write_config_byte(dev, 0x4b, tmpbyte); + } + } + return (ide_config_drive_speed(drive, speed)); +} + + +/** + * config_chipset_for_dma - set up DMA mode + * @drive: drive to configure for + * + * Place a drive into DMA mode and tune the chipset for + * the selected speed. + * + * Returns true if DMA mode can be used + */ + +static int config_chipset_for_dma (ide_drive_t *drive) +{ + u8 speed = ide_dma_speed(drive, ali15x3_ratemask(drive)); + + if (!(speed)) + return 0; + + (void) ali15x3_tune_chipset(drive, speed); + return ide_dma_enable(drive); +} + +/** + * ali15x3_config_drive_for_dma - configure for DMA + * @drive: drive to configure + * + * Configure a drive for DMA operation. If DMA is not possible we + * drop the drive into PIO mode instead. + * + * FIXME: exactly what are we trying to return here + */ + +static int ali15x3_config_drive_for_dma(ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + struct hd_driveid *id = drive->id; + + if ((m5229_revision<=0x20) && (drive->media!=ide_disk)) + return hwif->ide_dma_off_quietly(drive); + + drive->init_speed = 0; + + if ((id != NULL) && ((id->capability & 1) != 0) && drive->autodma) { + /* Consult the list of known "bad" drives */ + if (__ide_dma_bad_drive(drive)) + goto ata_pio; + if ((id->field_valid & 4) && (m5229_revision >= 0xC2)) { + if (id->dma_ultra & hwif->ultra_mask) { + /* Force if Capable UltraDMA */ + int dma = config_chipset_for_dma(drive); + if ((id->field_valid & 2) && !dma) + goto try_dma_modes; + } + } else if (id->field_valid & 2) { +try_dma_modes: + if ((id->dma_mword & hwif->mwdma_mask) || + (id->dma_1word & hwif->swdma_mask)) { + /* Force if Capable regular DMA modes */ + if (!config_chipset_for_dma(drive)) + goto no_dma_set; + } + } else if (__ide_dma_good_drive(drive) && + (id->eide_dma_time < 150)) { + /* Consult the list of known "good" drives */ + if (!config_chipset_for_dma(drive)) + goto no_dma_set; + } else { + goto ata_pio; + } + } else { +ata_pio: + hwif->tuneproc(drive, 255); +no_dma_set: + return hwif->ide_dma_off_quietly(drive); + } + return hwif->ide_dma_on(drive); +} + +/** + * ali15x3_dma_setup - begin a DMA phase + * @drive: target device + * + * Returns 1 if the DMA cannot be performed, zero on success. + */ + +static int ali15x3_dma_setup(ide_drive_t *drive) +{ + if (m5229_revision < 0xC2 && drive->media != ide_disk) { + if (rq_data_dir(drive->hwif->hwgroup->rq)) + return 1; /* try PIO instead of DMA */ + } + return ide_dma_setup(drive); +} + +/** + * init_chipset_ali15x3 - Initialise an ALi IDE controller + * @dev: PCI device + * @name: Name of the controller + * + * This function initializes the ALI IDE controller and where + * appropriate also sets up the 1533 southbridge. + */ + +static unsigned int __init init_chipset_ali15x3 (struct pci_dev *dev, const char *name) +{ + unsigned long flags; + u8 tmpbyte; + struct pci_dev *north = pci_find_slot(0, PCI_DEVFN(0,0)); + + pci_read_config_byte(dev, PCI_REVISION_ID, &m5229_revision); + + isa_dev = pci_find_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL); + +#if defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_PROC_FS) + if (!ali_proc) { + ali_proc = 1; + bmide_dev = dev; + ide_pci_create_host_proc("ali", ali_get_info); + } +#endif /* defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_PROC_FS) */ + + local_irq_save(flags); + + if (m5229_revision < 0xC2) { + /* + * revision 0x20 (1543-E, 1543-F) + * revision 0xC0, 0xC1 (1543C-C, 1543C-D, 1543C-E) + * clear CD-ROM DMA write bit, m5229, 0x4b, bit 7 + */ + pci_read_config_byte(dev, 0x4b, &tmpbyte); + /* + * clear bit 7 + */ + pci_write_config_byte(dev, 0x4b, tmpbyte & 0x7F); + local_irq_restore(flags); + return 0; + } + + /* + * 1543C-B?, 1535, 1535D, 1553 + * Note 1: not all "motherboard" support this detection + * Note 2: if no udma 66 device, the detection may "error". + * but in this case, we will not set the device to + * ultra 66, the detection result is not important + */ + + /* + * enable "Cable Detection", m5229, 0x4b, bit3 + */ + pci_read_config_byte(dev, 0x4b, &tmpbyte); + pci_write_config_byte(dev, 0x4b, tmpbyte | 0x08); + + /* + * We should only tune the 1533 enable if we are using an ALi + * North bridge. We might have no north found on some zany + * box without a device at 0:0.0. The ALi bridge will be at + * 0:0.0 so if we didn't find one we know what is cooking. + */ + if (north && north->vendor != PCI_VENDOR_ID_AL) { + local_irq_restore(flags); + return 0; + } + + if (m5229_revision < 0xC5 && isa_dev) + { + /* + * set south-bridge's enable bit, m1533, 0x79 + */ + + pci_read_config_byte(isa_dev, 0x79, &tmpbyte); + if (m5229_revision == 0xC2) { + /* + * 1543C-B0 (m1533, 0x79, bit 2) + */ + pci_write_config_byte(isa_dev, 0x79, tmpbyte | 0x04); + } else if (m5229_revision >= 0xC3) { + /* + * 1553/1535 (m1533, 0x79, bit 1) + */ + pci_write_config_byte(isa_dev, 0x79, tmpbyte | 0x02); + } + } + local_irq_restore(flags); + return 0; +} + +/** + * ata66_ali15x3 - check for UDMA 66 support + * @hwif: IDE interface + * + * This checks if the controller and the cable are capable + * of UDMA66 transfers. It doesn't check the drives. + * But see note 2 below! + * + * FIXME: frobs bits that are not defined on newer ALi devicea + */ + +static unsigned int __init ata66_ali15x3 (ide_hwif_t *hwif) +{ + struct pci_dev *dev = hwif->pci_dev; + unsigned int ata66 = 0; + u8 cable_80_pin[2] = { 0, 0 }; + + unsigned long flags; + u8 tmpbyte; + + local_irq_save(flags); + + if (m5229_revision >= 0xC2) { + /* + * Ultra66 cable detection (from Host View) + * m5229, 0x4a, bit0: primary, bit1: secondary 80 pin + */ + pci_read_config_byte(dev, 0x4a, &tmpbyte); + /* + * 0x4a, bit0 is 0 => primary channel + * has 80-pin (from host view) + */ + if (!(tmpbyte & 0x01)) cable_80_pin[0] = 1; + /* + * 0x4a, bit1 is 0 => secondary channel + * has 80-pin (from host view) + */ + if (!(tmpbyte & 0x02)) cable_80_pin[1] = 1; + /* + * Allow ata66 if cable of current channel has 80 pins + */ + ata66 = (hwif->channel)?cable_80_pin[1]:cable_80_pin[0]; + } else { + /* + * check m1533, 0x5e, bit 1~4 == 1001 => & 00011110 = 00010010 + */ + pci_read_config_byte(isa_dev, 0x5e, &tmpbyte); + chip_is_1543c_e = ((tmpbyte & 0x1e) == 0x12) ? 1: 0; + } + + /* + * CD_ROM DMA on (m5229, 0x53, bit0) + * Enable this bit even if we want to use PIO + * PIO FIFO off (m5229, 0x53, bit1) + * The hardware will use 0x54h and 0x55h to control PIO FIFO + * (Not on later devices it seems) + * + * 0x53 changes meaning on later revs - we must no touch + * bit 1 on them. Need to check if 0x20 is the right break + */ + + pci_read_config_byte(dev, 0x53, &tmpbyte); + + if(m5229_revision <= 0x20) + tmpbyte = (tmpbyte & (~0x02)) | 0x01; + else + tmpbyte |= 0x01; + + pci_write_config_byte(dev, 0x53, tmpbyte); + + local_irq_restore(flags); + + return(ata66); +} + +/** + * init_hwif_common_ali15x3 - Set up ALI IDE hardware + * @hwif: IDE interface + * + * Initialize the IDE structure side of the ALi 15x3 driver. + */ + +static void __init init_hwif_common_ali15x3 (ide_hwif_t *hwif) +{ + hwif->autodma = 0; + hwif->tuneproc = &ali15x3_tune_drive; + hwif->speedproc = &ali15x3_tune_chipset; + + /* don't use LBA48 DMA on ALi devices before rev 0xC5 */ + hwif->no_lba48_dma = (m5229_revision <= 0xC4) ? 1 : 0; + + if (!hwif->dma_base) { + hwif->drives[0].autotune = 1; + hwif->drives[1].autotune = 1; + return; + } + + hwif->atapi_dma = 1; + + if (m5229_revision > 0x20) + hwif->ultra_mask = 0x7f; + hwif->mwdma_mask = 0x07; + hwif->swdma_mask = 0x07; + + if (m5229_revision >= 0x20) { + /* + * M1543C or newer for DMAing + */ + hwif->ide_dma_check = &ali15x3_config_drive_for_dma; + hwif->dma_setup = &ali15x3_dma_setup; + if (!noautodma) + hwif->autodma = 1; + if (!(hwif->udma_four)) + hwif->udma_four = ata66_ali15x3(hwif); + } + hwif->drives[0].autodma = hwif->autodma; + hwif->drives[1].autodma = hwif->autodma; +} + +/** + * init_hwif_ali15x3 - Initialize the ALI IDE x86 stuff + * @hwif: interface to configure + * + * Obtain the IRQ tables for an ALi based IDE solution on the PC + * class platforms. This part of the code isn't applicable to the + * Sparc systems + */ + +static void __init init_hwif_ali15x3 (ide_hwif_t *hwif) +{ + u8 ideic, inmir; + s8 irq_routing_table[] = { -1, 9, 3, 10, 4, 5, 7, 6, + 1, 11, 0, 12, 0, 14, 0, 15 }; + int irq = -1; + + if (hwif->pci_dev->device == PCI_DEVICE_ID_AL_M5229) + hwif->irq = hwif->channel ? 15 : 14; + + if (isa_dev) { + /* + * read IDE interface control + */ + pci_read_config_byte(isa_dev, 0x58, &ideic); + + /* bit0, bit1 */ + ideic = ideic & 0x03; + + /* get IRQ for IDE Controller */ + if ((hwif->channel && ideic == 0x03) || + (!hwif->channel && !ideic)) { + /* + * get SIRQ1 routing table + */ + pci_read_config_byte(isa_dev, 0x44, &inmir); + inmir = inmir & 0x0f; + irq = irq_routing_table[inmir]; + } else if (hwif->channel && !(ideic & 0x01)) { + /* + * get SIRQ2 routing table + */ + pci_read_config_byte(isa_dev, 0x75, &inmir); + inmir = inmir & 0x0f; + irq = irq_routing_table[inmir]; + } + if(irq >= 0) + hwif->irq = irq; + } + + init_hwif_common_ali15x3(hwif); +} + +/** + * init_dma_ali15x3 - set up DMA on ALi15x3 + * @hwif: IDE interface + * @dmabase: DMA interface base PCI address + * + * Set up the DMA functionality on the ALi 15x3. For the ALi + * controllers this is generic so we can let the generic code do + * the actual work. + */ + +static void __init init_dma_ali15x3 (ide_hwif_t *hwif, unsigned long dmabase) +{ + if (m5229_revision < 0x20) + return; + if (!(hwif->channel)) + hwif->OUTB(hwif->INB(dmabase+2) & 0x60, dmabase+2); + ide_setup_dma(hwif, dmabase, 8); +} + +static ide_pci_device_t ali15x3_chipset __devinitdata = { + .name = "ALI15X3", + .init_chipset = init_chipset_ali15x3, + .init_hwif = init_hwif_ali15x3, + .init_dma = init_dma_ali15x3, + .channels = 2, + .autodma = AUTODMA, + .bootable = ON_BOARD, +}; + +/** + * alim15x3_init_one - set up an ALi15x3 IDE controller + * @dev: PCI device to set up + * + * Perform the actual set up for an ALi15x3 that has been found by the + * hot plug layer. + */ + +static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + ide_pci_device_t *d = &ali15x3_chipset; + + if(pci_find_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS100, NULL)) + printk(KERN_ERR "Warning: ATI Radeon IGP Northbridge is not yet fully tested.\n"); + +#if defined(CONFIG_SPARC64) + d->init_hwif = init_hwif_common_ali15x3; +#endif /* CONFIG_SPARC64 */ + return ide_setup_pci_device(dev, d); +} + + +static struct pci_device_id alim15x3_pci_tbl[] = { + { PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M5229, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M5228, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, alim15x3_pci_tbl); + +static struct pci_driver driver = { + .name = "ALI15x3_IDE", + .id_table = alim15x3_pci_tbl, + .probe = alim15x3_init_one, +}; + +static int ali15x3_ide_init(void) +{ + return ide_pci_register_driver(&driver); +} + +module_init(ali15x3_ide_init); + +MODULE_AUTHOR("Michael Aubry, Andrzej Krzysztofowicz, CJ, Andre Hedrick, Alan Cox"); +MODULE_DESCRIPTION("PCI driver module for ALi 15x3 IDE"); +MODULE_LICENSE("GPL"); -- cgit v1.2.2