From 23579a2a170265aacf78069f4817a41c1d6e9323 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 18 Apr 2008 00:46:26 +0200 Subject: ide: remove IDE_*_REG macros * Add IDE_{ALTSTATUS,IREASON,BCOUNTL,BCOUNTH}_OFFSET defines. * Remove IDE_*_REG macros - this results in more readable and slightly smaller code. There should be no functional changes caused by this patch. Cc: Borislav Petkov Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/legacy/ht6560b.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers/ide/legacy/ht6560b.c') diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/legacy/ht6560b.c index 78ca68e60f97..314e6c6aeb6c 100644 --- a/drivers/ide/legacy/ht6560b.c +++ b/drivers/ide/legacy/ht6560b.c @@ -82,7 +82,7 @@ * out how they setup those cycle time interfacing values, as they at Holtek * call them. IDESETUP.COM that is supplied with the drivers figures out * optimal values and fetches those values to drivers. I found out that - * they use IDE_SELECT_REG to fetch timings to the ide board right after + * they use Select register to fetch timings to the ide board right after * interface switching. After that it was quite easy to add code to * ht6560b.c. * @@ -127,6 +127,7 @@ */ static void ht6560b_selectproc (ide_drive_t *drive) { + ide_hwif_t *hwif = drive->hwif; unsigned long flags; static u8 current_select = 0; static u8 current_timing = 0; @@ -155,8 +156,8 @@ static void ht6560b_selectproc (ide_drive_t *drive) /* * Set timing for this drive: */ - outb(timing, IDE_SELECT_REG); - (void)inb(IDE_STATUS_REG); + outb(timing, hwif->io_ports[IDE_SELECT_OFFSET]); + (void)inb(hwif->io_ports[IDE_STATUS_OFFSET]); #ifdef DEBUG printk("ht6560b: %s: select=%#x timing=%#x\n", drive->name, select, timing); @@ -193,9 +194,9 @@ static int __init try_to_init_ht6560b(void) * Ht6560b autodetected */ outb(HT_CONFIG_DEFAULT, HT_CONFIG_PORT); - outb(HT_TIMING_DEFAULT, 0x1f6); /* IDE_SELECT_REG */ - (void) inb(0x1f7); /* IDE_STATUS_REG */ - + outb(HT_TIMING_DEFAULT, 0x1f6); /* Select register */ + (void)inb(0x1f7); /* Status register */ + printk("ht6560b " HT6560B_VERSION ": chipset detected and initialized" #ifdef DEBUG -- cgit v1.2.2