From 2bfba3c444fe8b2ab1c38112a89d8f03b61136ca Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 21 Oct 2008 20:57:23 +0200 Subject: ide: remove useless subdirs from drivers/ide/ Suggested-by: Ralf Baechle Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/cmd64x.c | 532 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 532 insertions(+) create mode 100644 drivers/ide/cmd64x.c (limited to 'drivers/ide/cmd64x.c') diff --git a/drivers/ide/cmd64x.c b/drivers/ide/cmd64x.c new file mode 100644 index 000000000000..935385c77e06 --- /dev/null +++ b/drivers/ide/cmd64x.c @@ -0,0 +1,532 @@ +/* + * cmd64x.c: Enable interrupts at initialization time on Ultra/PCI machines. + * Due to massive hardware bugs, UltraDMA is only supported + * on the 646U2 and not on the 646U. + * + * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be) + * Copyright (C) 1998 David S. Miller (davem@redhat.com) + * + * Copyright (C) 1999-2002 Andre Hedrick + * Copyright (C) 2007 MontaVista Software, Inc. + */ + +#include +#include +#include +#include +#include + +#include + +#define DRV_NAME "cmd64x" + +#define CMD_DEBUG 0 + +#if CMD_DEBUG +#define cmdprintk(x...) printk(x) +#else +#define cmdprintk(x...) +#endif + +/* + * CMD64x specific registers definition. + */ +#define CFR 0x50 +#define CFR_INTR_CH0 0x04 + +#define CMDTIM 0x52 +#define ARTTIM0 0x53 +#define DRWTIM0 0x54 +#define ARTTIM1 0x55 +#define DRWTIM1 0x56 +#define ARTTIM23 0x57 +#define ARTTIM23_DIS_RA2 0x04 +#define ARTTIM23_DIS_RA3 0x08 +#define ARTTIM23_INTR_CH1 0x10 +#define DRWTIM2 0x58 +#define BRST 0x59 +#define DRWTIM3 0x5b + +#define BMIDECR0 0x70 +#define MRDMODE 0x71 +#define MRDMODE_INTR_CH0 0x04 +#define MRDMODE_INTR_CH1 0x08 +#define UDIDETCR0 0x73 +#define DTPR0 0x74 +#define BMIDECR1 0x78 +#define BMIDECSR 0x79 +#define UDIDETCR1 0x7B +#define DTPR1 0x7C + +static u8 quantize_timing(int timing, int quant) +{ + return (timing + quant - 1) / quant; +} + +/* + * This routine calculates active/recovery counts and then writes them into + * the chipset registers. + */ +static void program_cycle_times (ide_drive_t *drive, int cycle_time, int active_time) +{ + struct pci_dev *dev = to_pci_dev(drive->hwif->dev); + int clock_time = 1000 / (ide_pci_clk ? ide_pci_clk : 33); + u8 cycle_count, active_count, recovery_count, drwtim; + static const u8 recovery_values[] = + {15, 15, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 0}; + static const u8 drwtim_regs[4] = {DRWTIM0, DRWTIM1, DRWTIM2, DRWTIM3}; + + cmdprintk("program_cycle_times parameters: total=%d, active=%d\n", + cycle_time, active_time); + + cycle_count = quantize_timing( cycle_time, clock_time); + active_count = quantize_timing(active_time, clock_time); + recovery_count = cycle_count - active_count; + + /* + * In case we've got too long recovery phase, try to lengthen + * the active phase + */ + if (recovery_count > 16) { + active_count += recovery_count - 16; + recovery_count = 16; + } + if (active_count > 16) /* shouldn't actually happen... */ + active_count = 16; + + cmdprintk("Final counts: total=%d, active=%d, recovery=%d\n", + cycle_count, active_count, recovery_count); + + /* + * Convert values to internal chipset representation + */ + recovery_count = recovery_values[recovery_count]; + active_count &= 0x0f; + + /* Program the active/recovery counts into the DRWTIM register */ + drwtim = (active_count << 4) | recovery_count; + (void) pci_write_config_byte(dev, drwtim_regs[drive->dn], drwtim); + cmdprintk("Write 0x%02x to reg 0x%x\n", drwtim, drwtim_regs[drive->dn]); +} + +/* + * This routine writes into the chipset registers + * PIO setup/active/recovery timings. + */ +static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = to_pci_dev(hwif->dev); + struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); + unsigned int cycle_time; + u8 setup_count, arttim = 0; + + static const u8 setup_values[] = {0x40, 0x40, 0x40, 0x80, 0, 0xc0}; + static const u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23}; + + cycle_time = ide_pio_cycle_time(drive, pio); + + program_cycle_times(drive, cycle_time, t->active); + + setup_count = quantize_timing(t->setup, + 1000 / (ide_pci_clk ? ide_pci_clk : 33)); + + /* + * The primary channel has individual address setup timing registers + * for each drive and the hardware selects the slowest timing itself. + * The secondary channel has one common register and we have to select + * the slowest address setup timing ourselves. + */ + if (hwif->channel) { + ide_drive_t *drives = hwif->drives; + + drive->drive_data = setup_count; + setup_count = max(drives[0].drive_data, drives[1].drive_data); + } + + if (setup_count > 5) /* shouldn't actually happen... */ + setup_count = 5; + cmdprintk("Final address setup count: %d\n", setup_count); + + /* + * Program the address setup clocks into the ARTTIM registers. + * Avoid clearing the secondary channel's interrupt bit. + */ + (void) pci_read_config_byte (dev, arttim_regs[drive->dn], &arttim); + if (hwif->channel) + arttim &= ~ARTTIM23_INTR_CH1; + arttim &= ~0xc0; + arttim |= setup_values[setup_count]; + (void) pci_write_config_byte(dev, arttim_regs[drive->dn], arttim); + cmdprintk("Write 0x%02x to reg 0x%x\n", arttim, arttim_regs[drive->dn]); +} + +/* + * Attempts to set drive's PIO mode. + * Special cases are 8: prefetch off, 9: prefetch on (both never worked) + */ + +static void cmd64x_set_pio_mode(ide_drive_t *drive, const u8 pio) +{ + /* + * Filter out the prefetch control values + * to prevent PIO5 from being programmed + */ + if (pio == 8 || pio == 9) + return; + + cmd64x_tune_pio(drive, pio); +} + +static void cmd64x_set_dma_mode(ide_drive_t *drive, const u8 speed) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = to_pci_dev(hwif->dev); + u8 unit = drive->dn & 0x01; + u8 regU = 0, pciU = hwif->channel ? UDIDETCR1 : UDIDETCR0; + + if (speed >= XFER_SW_DMA_0) { + (void) pci_read_config_byte(dev, pciU, ®U); + regU &= ~(unit ? 0xCA : 0x35); + } + + switch(speed) { + case XFER_UDMA_5: + regU |= unit ? 0x0A : 0x05; + break; + case XFER_UDMA_4: + regU |= unit ? 0x4A : 0x15; + break; + case XFER_UDMA_3: + regU |= unit ? 0x8A : 0x25; + break; + case XFER_UDMA_2: + regU |= unit ? 0x42 : 0x11; + break; + case XFER_UDMA_1: + regU |= unit ? 0x82 : 0x21; + break; + case XFER_UDMA_0: + regU |= unit ? 0xC2 : 0x31; + break; + case XFER_MW_DMA_2: + program_cycle_times(drive, 120, 70); + break; + case XFER_MW_DMA_1: + program_cycle_times(drive, 150, 80); + break; + case XFER_MW_DMA_0: + program_cycle_times(drive, 480, 215); + break; + } + + if (speed >= XFER_SW_DMA_0) + (void) pci_write_config_byte(dev, pciU, regU); +} + +static int cmd648_dma_end(ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + unsigned long base = hwif->dma_base - (hwif->channel * 8); + int err = ide_dma_end(drive); + u8 irq_mask = hwif->channel ? MRDMODE_INTR_CH1 : + MRDMODE_INTR_CH0; + u8 mrdmode = inb(base + 1); + + /* clear the interrupt bit */ + outb((mrdmode & ~(MRDMODE_INTR_CH0 | MRDMODE_INTR_CH1)) | irq_mask, + base + 1); + + return err; +} + +static int cmd64x_dma_end(ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = to_pci_dev(hwif->dev); + int irq_reg = hwif->channel ? ARTTIM23 : CFR; + u8 irq_mask = hwif->channel ? ARTTIM23_INTR_CH1 : + CFR_INTR_CH0; + u8 irq_stat = 0; + int err = ide_dma_end(drive); + + (void) pci_read_config_byte(dev, irq_reg, &irq_stat); + /* clear the interrupt bit */ + (void) pci_write_config_byte(dev, irq_reg, irq_stat | irq_mask); + + return err; +} + +static int cmd648_dma_test_irq(ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + unsigned long base = hwif->dma_base - (hwif->channel * 8); + u8 irq_mask = hwif->channel ? MRDMODE_INTR_CH1 : + MRDMODE_INTR_CH0; + u8 dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS); + u8 mrdmode = inb(base + 1); + +#ifdef DEBUG + printk("%s: dma_stat: 0x%02x mrdmode: 0x%02x irq_mask: 0x%02x\n", + drive->name, dma_stat, mrdmode, irq_mask); +#endif + if (!(mrdmode & irq_mask)) + return 0; + + /* return 1 if INTR asserted */ + if (dma_stat & 4) + return 1; + + return 0; +} + +static int cmd64x_dma_test_irq(ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = to_pci_dev(hwif->dev); + int irq_reg = hwif->channel ? ARTTIM23 : CFR; + u8 irq_mask = hwif->channel ? ARTTIM23_INTR_CH1 : + CFR_INTR_CH0; + u8 dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS); + u8 irq_stat = 0; + + (void) pci_read_config_byte(dev, irq_reg, &irq_stat); + +#ifdef DEBUG + printk("%s: dma_stat: 0x%02x irq_stat: 0x%02x irq_mask: 0x%02x\n", + drive->name, dma_stat, irq_stat, irq_mask); +#endif + if (!(irq_stat & irq_mask)) + return 0; + + /* return 1 if INTR asserted */ + if (dma_stat & 4) + return 1; + + return 0; +} + +/* + * ASUS P55T2P4D with CMD646 chipset revision 0x01 requires the old + * event order for DMA transfers. + */ + +static int cmd646_1_dma_end(ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + u8 dma_stat = 0, dma_cmd = 0; + + drive->waiting_for_dma = 0; + /* get DMA status */ + dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS); + /* read DMA command state */ + dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD); + /* stop DMA */ + outb(dma_cmd & ~1, hwif->dma_base + ATA_DMA_CMD); + /* clear the INTR & ERROR bits */ + outb(dma_stat | 6, hwif->dma_base + ATA_DMA_STATUS); + /* and free any DMA resources */ + ide_destroy_dmatable(drive); + /* verify good DMA status */ + return (dma_stat & 7) != 4; +} + +static unsigned int init_chipset_cmd64x(struct pci_dev *dev) +{ + u8 mrdmode = 0; + + /* Set a good latency timer and cache line size value. */ + (void) pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64); + /* FIXME: pci_set_master() to ensure a good latency timer value */ + + /* + * Enable interrupts, select MEMORY READ LINE for reads. + * + * NOTE: although not mentioned in the PCI0646U specs, + * bits 0-1 are write only and won't be read back as + * set or not -- PCI0646U2 specs clarify this point. + */ + (void) pci_read_config_byte (dev, MRDMODE, &mrdmode); + mrdmode &= ~0x30; + (void) pci_write_config_byte(dev, MRDMODE, (mrdmode | 0x02)); + + return 0; +} + +static u8 cmd64x_cable_detect(ide_hwif_t *hwif) +{ + struct pci_dev *dev = to_pci_dev(hwif->dev); + u8 bmidecsr = 0, mask = hwif->channel ? 0x02 : 0x01; + + switch (dev->device) { + case PCI_DEVICE_ID_CMD_648: + case PCI_DEVICE_ID_CMD_649: + pci_read_config_byte(dev, BMIDECSR, &bmidecsr); + return (bmidecsr & mask) ? ATA_CBL_PATA80 : ATA_CBL_PATA40; + default: + return ATA_CBL_PATA40; + } +} + +static const struct ide_port_ops cmd64x_port_ops = { + .set_pio_mode = cmd64x_set_pio_mode, + .set_dma_mode = cmd64x_set_dma_mode, + .cable_detect = cmd64x_cable_detect, +}; + +static const struct ide_dma_ops cmd64x_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = ide_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, + .dma_start = ide_dma_start, + .dma_end = cmd64x_dma_end, + .dma_test_irq = cmd64x_dma_test_irq, + .dma_lost_irq = ide_dma_lost_irq, + .dma_timeout = ide_dma_timeout, +}; + +static const struct ide_dma_ops cmd646_rev1_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = ide_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, + .dma_start = ide_dma_start, + .dma_end = cmd646_1_dma_end, + .dma_test_irq = ide_dma_test_irq, + .dma_lost_irq = ide_dma_lost_irq, + .dma_timeout = ide_dma_timeout, +}; + +static const struct ide_dma_ops cmd648_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = ide_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, + .dma_start = ide_dma_start, + .dma_end = cmd648_dma_end, + .dma_test_irq = cmd648_dma_test_irq, + .dma_lost_irq = ide_dma_lost_irq, + .dma_timeout = ide_dma_timeout, +}; + +static const struct ide_port_info cmd64x_chipsets[] __devinitdata = { + { /* 0: CMD643 */ + .name = DRV_NAME, + .init_chipset = init_chipset_cmd64x, + .enablebits = {{0x00,0x00,0x00}, {0x51,0x08,0x08}}, + .port_ops = &cmd64x_port_ops, + .dma_ops = &cmd64x_dma_ops, + .host_flags = IDE_HFLAG_CLEAR_SIMPLEX | + IDE_HFLAG_ABUSE_PREFETCH, + .pio_mask = ATA_PIO5, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = 0x00, /* no udma */ + }, + { /* 1: CMD646 */ + .name = DRV_NAME, + .init_chipset = init_chipset_cmd64x, + .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}}, + .chipset = ide_cmd646, + .port_ops = &cmd64x_port_ops, + .dma_ops = &cmd648_dma_ops, + .host_flags = IDE_HFLAG_ABUSE_PREFETCH, + .pio_mask = ATA_PIO5, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA2, + }, + { /* 2: CMD648 */ + .name = DRV_NAME, + .init_chipset = init_chipset_cmd64x, + .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}}, + .port_ops = &cmd64x_port_ops, + .dma_ops = &cmd648_dma_ops, + .host_flags = IDE_HFLAG_ABUSE_PREFETCH, + .pio_mask = ATA_PIO5, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA4, + }, + { /* 3: CMD649 */ + .name = DRV_NAME, + .init_chipset = init_chipset_cmd64x, + .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}}, + .port_ops = &cmd64x_port_ops, + .dma_ops = &cmd648_dma_ops, + .host_flags = IDE_HFLAG_ABUSE_PREFETCH, + .pio_mask = ATA_PIO5, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, + } +}; + +static int __devinit cmd64x_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + struct ide_port_info d; + u8 idx = id->driver_data; + + d = cmd64x_chipsets[idx]; + + if (idx == 1) { + /* + * UltraDMA only supported on PCI646U and PCI646U2, which + * correspond to revisions 0x03, 0x05 and 0x07 respectively. + * Actually, although the CMD tech support people won't + * tell me the details, the 0x03 revision cannot support + * UDMA correctly without hardware modifications, and even + * then it only works with Quantum disks due to some + * hold time assumptions in the 646U part which are fixed + * in the 646U2. + * + * So we only do UltraDMA on revision 0x05 and 0x07 chipsets. + */ + if (dev->revision < 5) { + d.udma_mask = 0x00; + /* + * The original PCI0646 didn't have the primary + * channel enable bit, it appeared starting with + * PCI0646U (i.e. revision ID 3). + */ + if (dev->revision < 3) { + d.enablebits[0].reg = 0; + if (dev->revision == 1) + d.dma_ops = &cmd646_rev1_dma_ops; + else + d.dma_ops = &cmd64x_dma_ops; + } + } + } + + return ide_pci_init_one(dev, &d, NULL); +} + +static const struct pci_device_id cmd64x_pci_tbl[] = { + { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_643), 0 }, + { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_646), 1 }, + { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_648), 2 }, + { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_649), 3 }, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, cmd64x_pci_tbl); + +static struct pci_driver cmd64x_pci_driver = { + .name = "CMD64x_IDE", + .id_table = cmd64x_pci_tbl, + .probe = cmd64x_init_one, + .remove = ide_pci_remove, + .suspend = ide_pci_suspend, + .resume = ide_pci_resume, +}; + +static int __init cmd64x_ide_init(void) +{ + return ide_pci_register_driver(&cmd64x_pci_driver); +} + +static void __exit cmd64x_ide_exit(void) +{ + pci_unregister_driver(&cmd64x_pci_driver); +} + +module_init(cmd64x_ide_init); +module_exit(cmd64x_ide_exit); + +MODULE_AUTHOR("Eddie Dost, David Miller, Andre Hedrick"); +MODULE_DESCRIPTION("PCI driver module for CMD64x IDE"); +MODULE_LICENSE("GPL"); -- cgit v1.2.2