From a0dcf19f59d4f37150a6b7e115925d72aca15293 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Fri, 20 Nov 2009 10:50:34 +0000
Subject: ARM: PNX4008: move i2c suspend/resume callbacks into driver

Acked-by: Vitaly Wool <vitalywool@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/i2c/busses/i2c-pnx.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

(limited to 'drivers/i2c')

diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 5d1c2603a130..bc8075514e53 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -545,18 +545,23 @@ static struct i2c_algorithm pnx_algorithm = {
 	.functionality = i2c_pnx_func,
 };
 
+#ifdef CONFIG_PM
 static int i2c_pnx_controller_suspend(struct platform_device *pdev,
 				      pm_message_t state)
 {
 	struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev);
-	return i2c_pnx->suspend(pdev, state);
+	return i2c_pnx->set_clock_run(pdev);
 }
 
 static int i2c_pnx_controller_resume(struct platform_device *pdev)
 {
 	struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev);
-	return i2c_pnx->resume(pdev);
+	return i2c_pnx->set_clock_run(pdev);
 }
+#else
+#define i2c_pnx_controller_suspend	NULL
+#define i2c_pnx_controller_resume	NULL
+#endif
 
 static int __devinit i2c_pnx_probe(struct platform_device *pdev)
 {
-- 
cgit v1.2.2


From 0321cb83e1c3f3a4282bd620c6cec78c5b80b572 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Fri, 20 Nov 2009 11:12:26 +0000
Subject: ARM: PNX4008: move i2c clock start/stop into driver

Acked-by: Vitaly Wool <vitalywool@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/i2c/busses/i2c-pnx.c | 39 ++++++++++++++++++++++++++++++---------
 1 file changed, 30 insertions(+), 9 deletions(-)

(limited to 'drivers/i2c')

diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index bc8075514e53..98462671cdf7 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -20,6 +20,9 @@
 #include <linux/platform_device.h>
 #include <linux/i2c-pnx.h>
 #include <linux/io.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+
 #include <mach/hardware.h>
 #include <mach/i2c.h>
 #include <asm/irq.h>
@@ -550,13 +553,22 @@ static int i2c_pnx_controller_suspend(struct platform_device *pdev,
 				      pm_message_t state)
 {
 	struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev);
-	return i2c_pnx->set_clock_run(pdev);
+	struct i2c_pnx_algo_data *alg_data = i2c_pnx->adapter->algo_data;
+
+	/* FIXME: disable clock? */
+	clk_set_rate(alg_data->clk, 1);
+
+	return 0;
 }
 
 static int i2c_pnx_controller_resume(struct platform_device *pdev)
 {
 	struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev);
-	return i2c_pnx->set_clock_run(pdev);
+	struct i2c_pnx_algo_data *alg_data = i2c_pnx->adapter->algo_data;
+
+	clk_set_rate(alg_data->clk, 1);
+
+	return 0;
 }
 #else
 #define i2c_pnx_controller_suspend	NULL
@@ -580,6 +592,15 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, i2c_pnx);
 
+	i2c_pnx->adapter->algo = &pnx_algorithm;
+	alg_data = i2c_pnx->adapter->algo_data;
+
+	alg_data->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(alg_data->clk)) {
+		ret = PTR_ERR(alg_data->clk);
+		goto out_drvdata;
+	}
+
 	if (i2c_pnx->calculate_input_freq)
 		freq_mhz = i2c_pnx->calculate_input_freq(pdev);
 	else {
@@ -588,9 +609,6 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev)
 		       "%d MHz\n", freq_mhz);
 	}
 
-	i2c_pnx->adapter->algo = &pnx_algorithm;
-
-	alg_data = i2c_pnx->adapter->algo_data;
 	init_timer(&alg_data->mif.timer);
 	alg_data->mif.timer.function = i2c_pnx_timeout;
 	alg_data->mif.timer.data = (unsigned long)i2c_pnx->adapter;
@@ -602,7 +620,7 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev)
 		       "I/O region 0x%08x for I2C already in use.\n",
 		       alg_data->base);
 		ret = -ENODEV;
-		goto out_drvdata;
+		goto out_clkget;
 	}
 
 	if (!(alg_data->ioaddr =
@@ -612,7 +630,7 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev)
 		goto out_release;
 	}
 
-	i2c_pnx->set_clock_run(pdev);
+	clk_set_rate(alg_data->clk, 1);
 
 	/*
 	 * Clock Divisor High This value is the number of system clocks
@@ -658,11 +676,13 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev)
 out_irq:
 	free_irq(alg_data->irq, i2c_pnx->adapter);
 out_clock:
-	i2c_pnx->set_clock_stop(pdev);
+	clk_set_rate(alg_data->clk, 0);
 out_unmap:
 	iounmap((void *)alg_data->ioaddr);
 out_release:
 	release_mem_region(alg_data->base, I2C_PNX_REGION_SIZE);
+out_clkget:
+	clk_put(alg_data->clk);
 out_drvdata:
 	platform_set_drvdata(pdev, NULL);
 out:
@@ -677,9 +697,10 @@ static int __devexit i2c_pnx_remove(struct platform_device *pdev)
 
 	free_irq(alg_data->irq, i2c_pnx->adapter);
 	i2c_del_adapter(adap);
-	i2c_pnx->set_clock_stop(pdev);
+	clk_set_rate(alg_data->clk, 0);
 	iounmap((void *)alg_data->ioaddr);
 	release_mem_region(alg_data->base, I2C_PNX_REGION_SIZE);
+	clk_put(alg_data->clk);
 	platform_set_drvdata(pdev, NULL);
 
 	return 0;
-- 
cgit v1.2.2


From ebdbbf2003ae2342147c87c2a6c6ed8984b9cede Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Fri, 20 Nov 2009 11:44:46 +0000
Subject: ARM: PNX4008: convert i2c-pnx to use clk API enable/disable calls

clk_set_rate() is not supposed to be used to turn clocks on and off.
That's what clk_enable/clk_disable is for.

Acked-by: Vitaly Wool <vitalywool@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/i2c/busses/i2c-pnx.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

(limited to 'drivers/i2c')

diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 98462671cdf7..29f91774c4df 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -555,8 +555,8 @@ static int i2c_pnx_controller_suspend(struct platform_device *pdev,
 	struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev);
 	struct i2c_pnx_algo_data *alg_data = i2c_pnx->adapter->algo_data;
 
-	/* FIXME: disable clock? */
-	clk_set_rate(alg_data->clk, 1);
+	/* FIXME: shouldn't this be clk_disable? */
+	clk_enable(alg_data->clk);
 
 	return 0;
 }
@@ -566,9 +566,7 @@ static int i2c_pnx_controller_resume(struct platform_device *pdev)
 	struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev);
 	struct i2c_pnx_algo_data *alg_data = i2c_pnx->adapter->algo_data;
 
-	clk_set_rate(alg_data->clk, 1);
-
-	return 0;
+	return clk_enable(alg_data->clk);
 }
 #else
 #define i2c_pnx_controller_suspend	NULL
@@ -630,7 +628,9 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev)
 		goto out_release;
 	}
 
-	clk_set_rate(alg_data->clk, 1);
+	ret = clk_enable(alg_data->clk);
+	if (ret)
+		goto out_unmap;
 
 	/*
 	 * Clock Divisor High This value is the number of system clocks
@@ -650,7 +650,7 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev)
 	iowrite32(mcntrl_reset, I2C_REG_CTL(alg_data));
 	if (wait_reset(I2C_PNX_TIMEOUT, alg_data)) {
 		ret = -ENODEV;
-		goto out_unmap;
+		goto out_clock;
 	}
 	init_completion(&alg_data->mif.complete);
 
@@ -676,7 +676,7 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev)
 out_irq:
 	free_irq(alg_data->irq, i2c_pnx->adapter);
 out_clock:
-	clk_set_rate(alg_data->clk, 0);
+	clk_disable(alg_data->clk);
 out_unmap:
 	iounmap((void *)alg_data->ioaddr);
 out_release:
@@ -697,7 +697,7 @@ static int __devexit i2c_pnx_remove(struct platform_device *pdev)
 
 	free_irq(alg_data->irq, i2c_pnx->adapter);
 	i2c_del_adapter(adap);
-	clk_set_rate(alg_data->clk, 0);
+	clk_disable(alg_data->clk);
 	iounmap((void *)alg_data->ioaddr);
 	release_mem_region(alg_data->base, I2C_PNX_REGION_SIZE);
 	clk_put(alg_data->clk);
-- 
cgit v1.2.2


From 6fff3da998ac3cc9ed8a84bf4f19911bd63c8c32 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Fri, 20 Nov 2009 12:46:07 +0000
Subject: ARM: PNX4008: get i2c clock rate from clk API

Acked-by: Vitaly Wool <vitalywool@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/i2c/busses/i2c-pnx.c | 15 ++++-----------
 1 file changed, 4 insertions(+), 11 deletions(-)

(limited to 'drivers/i2c')

diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 29f91774c4df..bfcd079e885c 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -31,7 +31,6 @@
 #define I2C_PNX_TIMEOUT		10 /* msec */
 #define I2C_PNX_SPEED_KHZ	100
 #define I2C_PNX_REGION_SIZE	0x100
-#define PNX_DEFAULT_FREQ	13 /* MHz */
 
 static inline int wait_timeout(long timeout, struct i2c_pnx_algo_data *data)
 {
@@ -578,7 +577,7 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev)
 	unsigned long tmp;
 	int ret = 0;
 	struct i2c_pnx_algo_data *alg_data;
-	int freq_mhz;
+	unsigned long freq;
 	struct i2c_pnx_data *i2c_pnx = pdev->dev.platform_data;
 
 	if (!i2c_pnx || !i2c_pnx->adapter) {
@@ -599,14 +598,6 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev)
 		goto out_drvdata;
 	}
 
-	if (i2c_pnx->calculate_input_freq)
-		freq_mhz = i2c_pnx->calculate_input_freq(pdev);
-	else {
-		freq_mhz = PNX_DEFAULT_FREQ;
-		dev_info(&pdev->dev, "Setting bus frequency to default value: "
-		       "%d MHz\n", freq_mhz);
-	}
-
 	init_timer(&alg_data->mif.timer);
 	alg_data->mif.timer.function = i2c_pnx_timeout;
 	alg_data->mif.timer.data = (unsigned long)i2c_pnx->adapter;
@@ -632,6 +623,8 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev)
 	if (ret)
 		goto out_unmap;
 
+	freq = clk_get_rate(alg_data->clk);
+
 	/*
 	 * Clock Divisor High This value is the number of system clocks
 	 * the serial clock (SCL) will be high.
@@ -643,7 +636,7 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev)
 	 * the deglitching filter length.
 	 */
 
-	tmp = ((freq_mhz * 1000) / I2C_PNX_SPEED_KHZ) / 2 - 2;
+	tmp = ((freq / 1000) / I2C_PNX_SPEED_KHZ) / 2 - 2;
 	iowrite32(tmp, I2C_REG_CKH(alg_data));
 	iowrite32(tmp, I2C_REG_CKL(alg_data));
 
-- 
cgit v1.2.2


From 88d968b22fa26d5e3a8cab46fc7c3a21c89a91d3 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sat, 21 Nov 2009 11:58:36 +0000
Subject: ARM: PNX4008: Make ioaddr 'void __iomem *' rather than 'u32'

This avoids unnecessary casting.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/i2c/busses/i2c-pnx.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/i2c')

diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index bfcd079e885c..882579e64111 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -612,8 +612,8 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev)
 		goto out_clkget;
 	}
 
-	if (!(alg_data->ioaddr =
-			(u32)ioremap(alg_data->base, I2C_PNX_REGION_SIZE))) {
+	alg_data->ioaddr = ioremap(alg_data->base, I2C_PNX_REGION_SIZE);
+	if (!alg_data->ioaddr) {
 		dev_err(&pdev->dev, "Couldn't ioremap I2C I/O region\n");
 		ret = -ENOMEM;
 		goto out_release;
@@ -671,7 +671,7 @@ out_irq:
 out_clock:
 	clk_disable(alg_data->clk);
 out_unmap:
-	iounmap((void *)alg_data->ioaddr);
+	iounmap(alg_data->ioaddr);
 out_release:
 	release_mem_region(alg_data->base, I2C_PNX_REGION_SIZE);
 out_clkget:
@@ -691,7 +691,7 @@ static int __devexit i2c_pnx_remove(struct platform_device *pdev)
 	free_irq(alg_data->irq, i2c_pnx->adapter);
 	i2c_del_adapter(adap);
 	clk_disable(alg_data->clk);
-	iounmap((void *)alg_data->ioaddr);
+	iounmap(alg_data->ioaddr);
 	release_mem_region(alg_data->base, I2C_PNX_REGION_SIZE);
 	clk_put(alg_data->clk);
 	platform_set_drvdata(pdev, NULL);
-- 
cgit v1.2.2


From 44c5d739181886cff8e3903dfa38cd704f3d9640 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sat, 21 Nov 2009 12:10:54 +0000
Subject: ARM: PNX4008: kzalloc i2c drivers internal data

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/i2c/busses/i2c-pnx.c | 29 +++++++++++++++++++----------
 1 file changed, 19 insertions(+), 10 deletions(-)

(limited to 'drivers/i2c')

diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 882579e64111..1d66856a22fd 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -587,10 +587,16 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev)
 		goto out;
 	}
 
+	alg_data = kzalloc(sizeof(*alg_data), GFP_KERNEL);
+	if (!alg_data) {
+		ret = -ENOMEM;
+		goto err_kzalloc;
+	}
+
 	platform_set_drvdata(pdev, i2c_pnx);
 
 	i2c_pnx->adapter->algo = &pnx_algorithm;
-	alg_data = i2c_pnx->adapter->algo_data;
+	i2c_pnx->adapter->algo_data = alg_data;
 
 	alg_data->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(alg_data->clk)) {
@@ -603,16 +609,16 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev)
 	alg_data->mif.timer.data = (unsigned long)i2c_pnx->adapter;
 
 	/* Register I/O resource */
-	if (!request_mem_region(alg_data->base, I2C_PNX_REGION_SIZE,
+	if (!request_mem_region(i2c_pnx->base, I2C_PNX_REGION_SIZE,
 				pdev->name)) {
 		dev_err(&pdev->dev,
 		       "I/O region 0x%08x for I2C already in use.\n",
-		       alg_data->base);
+		       i2c_pnx->base);
 		ret = -ENODEV;
 		goto out_clkget;
 	}
 
-	alg_data->ioaddr = ioremap(alg_data->base, I2C_PNX_REGION_SIZE);
+	alg_data->ioaddr = ioremap(i2c_pnx->base, I2C_PNX_REGION_SIZE);
 	if (!alg_data->ioaddr) {
 		dev_err(&pdev->dev, "Couldn't ioremap I2C I/O region\n");
 		ret = -ENOMEM;
@@ -647,7 +653,7 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev)
 	}
 	init_completion(&alg_data->mif.complete);
 
-	ret = request_irq(alg_data->irq, i2c_pnx_interrupt,
+	ret = request_irq(i2c_pnx->irq, i2c_pnx_interrupt,
 			0, pdev->name, i2c_pnx->adapter);
 	if (ret)
 		goto out_clock;
@@ -662,21 +668,23 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev)
 	}
 
 	dev_dbg(&pdev->dev, "%s: Master at %#8x, irq %d.\n",
-	       i2c_pnx->adapter->name, alg_data->base, alg_data->irq);
+	       i2c_pnx->adapter->name, i2c_pnx->base, i2c_pnx->irq);
 
 	return 0;
 
 out_irq:
-	free_irq(alg_data->irq, i2c_pnx->adapter);
+	free_irq(i2c_pnx->irq, i2c_pnx->adapter);
 out_clock:
 	clk_disable(alg_data->clk);
 out_unmap:
 	iounmap(alg_data->ioaddr);
 out_release:
-	release_mem_region(alg_data->base, I2C_PNX_REGION_SIZE);
+	release_mem_region(i2c_pnx->base, I2C_PNX_REGION_SIZE);
 out_clkget:
 	clk_put(alg_data->clk);
 out_drvdata:
+	kfree(alg_data);
+err_kzalloc:
 	platform_set_drvdata(pdev, NULL);
 out:
 	return ret;
@@ -688,12 +696,13 @@ static int __devexit i2c_pnx_remove(struct platform_device *pdev)
 	struct i2c_adapter *adap = i2c_pnx->adapter;
 	struct i2c_pnx_algo_data *alg_data = adap->algo_data;
 
-	free_irq(alg_data->irq, i2c_pnx->adapter);
+	free_irq(i2c_pnx->irq, i2c_pnx->adapter);
 	i2c_del_adapter(adap);
 	clk_disable(alg_data->clk);
 	iounmap(alg_data->ioaddr);
-	release_mem_region(alg_data->base, I2C_PNX_REGION_SIZE);
+	release_mem_region(i2c_pnx->base, I2C_PNX_REGION_SIZE);
 	clk_put(alg_data->clk);
+	kfree(alg_data);
 	platform_set_drvdata(pdev, NULL);
 
 	return 0;
-- 
cgit v1.2.2


From 9d7f73632c87ef1b6187eb539d1efd63c3cf0e36 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sat, 21 Nov 2009 12:25:27 +0000
Subject: ARM: PNX4008: move i2c_adapter structure inside the drivers private
 data

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/i2c/busses/i2c-pnx.c | 40 ++++++++++++++++++++--------------------
 1 file changed, 20 insertions(+), 20 deletions(-)

(limited to 'drivers/i2c')

diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 1d66856a22fd..6b413c5300d3 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -551,8 +551,7 @@ static struct i2c_algorithm pnx_algorithm = {
 static int i2c_pnx_controller_suspend(struct platform_device *pdev,
 				      pm_message_t state)
 {
-	struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev);
-	struct i2c_pnx_algo_data *alg_data = i2c_pnx->adapter->algo_data;
+	struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev);
 
 	/* FIXME: shouldn't this be clk_disable? */
 	clk_enable(alg_data->clk);
@@ -562,8 +561,7 @@ static int i2c_pnx_controller_suspend(struct platform_device *pdev,
 
 static int i2c_pnx_controller_resume(struct platform_device *pdev)
 {
-	struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev);
-	struct i2c_pnx_algo_data *alg_data = i2c_pnx->adapter->algo_data;
+	struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev);
 
 	return clk_enable(alg_data->clk);
 }
@@ -580,7 +578,7 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev)
 	unsigned long freq;
 	struct i2c_pnx_data *i2c_pnx = pdev->dev.platform_data;
 
-	if (!i2c_pnx || !i2c_pnx->adapter) {
+	if (!i2c_pnx || !i2c_pnx->name) {
 		dev_err(&pdev->dev, "%s: no platform data supplied\n",
 		       __func__);
 		ret = -EINVAL;
@@ -593,10 +591,15 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev)
 		goto err_kzalloc;
 	}
 
-	platform_set_drvdata(pdev, i2c_pnx);
+	platform_set_drvdata(pdev, alg_data);
 
-	i2c_pnx->adapter->algo = &pnx_algorithm;
-	i2c_pnx->adapter->algo_data = alg_data;
+	strlcpy(alg_data->adapter.name, i2c_pnx->name,
+		sizeof(alg_data->adapter.name));
+	alg_data->adapter.dev.parent = &pdev->dev;
+	alg_data->adapter.algo = &pnx_algorithm;
+	alg_data->adapter.algo_data = alg_data;
+	alg_data->adapter.nr = pdev->id;
+	alg_data->i2c_pnx = i2c_pnx;
 
 	alg_data->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(alg_data->clk)) {
@@ -606,7 +609,7 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev)
 
 	init_timer(&alg_data->mif.timer);
 	alg_data->mif.timer.function = i2c_pnx_timeout;
-	alg_data->mif.timer.data = (unsigned long)i2c_pnx->adapter;
+	alg_data->mif.timer.data = (unsigned long)&alg_data->adapter;
 
 	/* Register I/O resource */
 	if (!request_mem_region(i2c_pnx->base, I2C_PNX_REGION_SIZE,
@@ -654,26 +657,24 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev)
 	init_completion(&alg_data->mif.complete);
 
 	ret = request_irq(i2c_pnx->irq, i2c_pnx_interrupt,
-			0, pdev->name, i2c_pnx->adapter);
+			0, pdev->name, &alg_data->adapter);
 	if (ret)
 		goto out_clock;
 
 	/* Register this adapter with the I2C subsystem */
-	i2c_pnx->adapter->dev.parent = &pdev->dev;
-	i2c_pnx->adapter->nr = pdev->id;
-	ret = i2c_add_numbered_adapter(i2c_pnx->adapter);
+	ret = i2c_add_numbered_adapter(&alg_data->adapter);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "I2C: Failed to add bus\n");
 		goto out_irq;
 	}
 
 	dev_dbg(&pdev->dev, "%s: Master at %#8x, irq %d.\n",
-	       i2c_pnx->adapter->name, i2c_pnx->base, i2c_pnx->irq);
+	       alg_data->adapter.name, i2c_pnx->base, i2c_pnx->irq);
 
 	return 0;
 
 out_irq:
-	free_irq(i2c_pnx->irq, i2c_pnx->adapter);
+	free_irq(i2c_pnx->irq, &alg_data->adapter);
 out_clock:
 	clk_disable(alg_data->clk);
 out_unmap:
@@ -692,12 +693,11 @@ out:
 
 static int __devexit i2c_pnx_remove(struct platform_device *pdev)
 {
-	struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev);
-	struct i2c_adapter *adap = i2c_pnx->adapter;
-	struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+	struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev);
+	struct i2c_pnx_data *i2c_pnx = alg_data->i2c_pnx;
 
-	free_irq(i2c_pnx->irq, i2c_pnx->adapter);
-	i2c_del_adapter(adap);
+	free_irq(i2c_pnx->irq, &alg_data->adapter);
+	i2c_del_adapter(&alg_data->adapter);
 	clk_disable(alg_data->clk);
 	iounmap(alg_data->ioaddr);
 	release_mem_region(i2c_pnx->base, I2C_PNX_REGION_SIZE);
-- 
cgit v1.2.2


From 81d6724a564fa5bd20b006eae0da4462d599bb92 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sat, 21 Nov 2009 12:40:00 +0000
Subject: ARM: PNX4008: Use i2c driver data for passing between internal
 functions

Since the drivers data now contains the i2c adapter structure, we can
pass around the drivers data between internal functions (which is what
they want) rather than using the i2c adapter structure and having an
additional pointer dereference each time.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/i2c/busses/i2c-pnx.c | 132 ++++++++++++++++++++-----------------------
 1 file changed, 62 insertions(+), 70 deletions(-)

(limited to 'drivers/i2c')

diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 6b413c5300d3..181e69211e4f 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -52,10 +52,9 @@ static inline int wait_reset(long timeout, struct i2c_pnx_algo_data *data)
 	return (timeout <= 0);
 }
 
-static inline void i2c_pnx_arm_timer(struct i2c_adapter *adap)
+static inline void i2c_pnx_arm_timer(struct i2c_pnx_algo_data *alg_data)
 {
-	struct i2c_pnx_algo_data *data = adap->algo_data;
-	struct timer_list *timer = &data->mif.timer;
+	struct timer_list *timer = &alg_data->mif.timer;
 	int expires = I2C_PNX_TIMEOUT / (1000 / HZ);
 
 	if (expires <= 1)
@@ -63,11 +62,11 @@ static inline void i2c_pnx_arm_timer(struct i2c_adapter *adap)
 
 	del_timer_sync(timer);
 
-	dev_dbg(&adap->dev, "Timer armed at %lu plus %u jiffies.\n",
+	dev_dbg(&alg_data->adapter.dev, "Timer armed at %lu plus %u jiffies.\n",
 		jiffies, expires);
 
 	timer->expires = jiffies + expires;
-	timer->data = (unsigned long)adap;
+	timer->data = (unsigned long)&alg_data;
 
 	add_timer(timer);
 }
@@ -79,34 +78,33 @@ static inline void i2c_pnx_arm_timer(struct i2c_adapter *adap)
  *
  * Generate a START signal in the desired mode.
  */
-static int i2c_pnx_start(unsigned char slave_addr, struct i2c_adapter *adap)
+static int i2c_pnx_start(unsigned char slave_addr,
+	struct i2c_pnx_algo_data *alg_data)
 {
-	struct i2c_pnx_algo_data *alg_data = adap->algo_data;
-
-	dev_dbg(&adap->dev, "%s(): addr 0x%x mode %d\n", __func__,
+	dev_dbg(&alg_data->adapter.dev, "%s(): addr 0x%x mode %d\n", __func__,
 		slave_addr, alg_data->mif.mode);
 
 	/* Check for 7 bit slave addresses only */
 	if (slave_addr & ~0x7f) {
-		dev_err(&adap->dev, "%s: Invalid slave address %x. "
+		dev_err(&alg_data->adapter.dev, "%s: Invalid slave address %x. "
 		       "Only 7-bit addresses are supported\n",
-		       adap->name, slave_addr);
+		       alg_data->adapter.name, slave_addr);
 		return -EINVAL;
 	}
 
 	/* First, make sure bus is idle */
 	if (wait_timeout(I2C_PNX_TIMEOUT, alg_data)) {
 		/* Somebody else is monopolizing the bus */
-		dev_err(&adap->dev, "%s: Bus busy. Slave addr = %02x, "
+		dev_err(&alg_data->adapter.dev, "%s: Bus busy. Slave addr = %02x, "
 		       "cntrl = %x, stat = %x\n",
-		       adap->name, slave_addr,
+		       alg_data->adapter.name, slave_addr,
 		       ioread32(I2C_REG_CTL(alg_data)),
 		       ioread32(I2C_REG_STS(alg_data)));
 		return -EBUSY;
 	} else if (ioread32(I2C_REG_STS(alg_data)) & mstatus_afi) {
 		/* Sorry, we lost the bus */
-		dev_err(&adap->dev, "%s: Arbitration failure. "
-		       "Slave addr = %02x\n", adap->name, slave_addr);
+		dev_err(&alg_data->adapter.dev, "%s: Arbitration failure. "
+		       "Slave addr = %02x\n", alg_data->adapter.name, slave_addr);
 		return -EIO;
 	}
 
@@ -117,14 +115,14 @@ static int i2c_pnx_start(unsigned char slave_addr, struct i2c_adapter *adap)
 	iowrite32(ioread32(I2C_REG_STS(alg_data)) | mstatus_tdi | mstatus_afi,
 		  I2C_REG_STS(alg_data));
 
-	dev_dbg(&adap->dev, "%s(): sending %#x\n", __func__,
+	dev_dbg(&alg_data->adapter.dev, "%s(): sending %#x\n", __func__,
 		(slave_addr << 1) | start_bit | alg_data->mif.mode);
 
 	/* Write the slave address, START bit and R/W bit */
 	iowrite32((slave_addr << 1) | start_bit | alg_data->mif.mode,
 		  I2C_REG_TX(alg_data));
 
-	dev_dbg(&adap->dev, "%s(): exit\n", __func__);
+	dev_dbg(&alg_data->adapter.dev, "%s(): exit\n", __func__);
 
 	return 0;
 }
@@ -135,13 +133,12 @@ static int i2c_pnx_start(unsigned char slave_addr, struct i2c_adapter *adap)
  *
  * Generate a STOP signal to terminate the master transaction.
  */
-static void i2c_pnx_stop(struct i2c_adapter *adap)
+static void i2c_pnx_stop(struct i2c_pnx_algo_data *alg_data)
 {
-	struct i2c_pnx_algo_data *alg_data = adap->algo_data;
 	/* Only 1 msec max timeout due to interrupt context */
 	long timeout = 1000;
 
-	dev_dbg(&adap->dev, "%s(): entering: stat = %04x.\n",
+	dev_dbg(&alg_data->adapter.dev, "%s(): entering: stat = %04x.\n",
 		__func__, ioread32(I2C_REG_STS(alg_data)));
 
 	/* Write a STOP bit to TX FIFO */
@@ -155,7 +152,7 @@ static void i2c_pnx_stop(struct i2c_adapter *adap)
 		timeout--;
 	}
 
-	dev_dbg(&adap->dev, "%s(): exiting: stat = %04x.\n",
+	dev_dbg(&alg_data->adapter.dev, "%s(): exiting: stat = %04x.\n",
 		__func__, ioread32(I2C_REG_STS(alg_data)));
 }
 
@@ -165,12 +162,11 @@ static void i2c_pnx_stop(struct i2c_adapter *adap)
  *
  * Sends one byte of data to the slave
  */
-static int i2c_pnx_master_xmit(struct i2c_adapter *adap)
+static int i2c_pnx_master_xmit(struct i2c_pnx_algo_data *alg_data)
 {
-	struct i2c_pnx_algo_data *alg_data = adap->algo_data;
 	u32 val;
 
-	dev_dbg(&adap->dev, "%s(): entering: stat = %04x.\n",
+	dev_dbg(&alg_data->adapter.dev, "%s(): entering: stat = %04x.\n",
 		__func__, ioread32(I2C_REG_STS(alg_data)));
 
 	if (alg_data->mif.len > 0) {
@@ -186,14 +182,14 @@ static int i2c_pnx_master_xmit(struct i2c_adapter *adap)
 		alg_data->mif.len--;
 		iowrite32(val, I2C_REG_TX(alg_data));
 
-		dev_dbg(&adap->dev, "%s(): xmit %#x [%d]\n", __func__,
+		dev_dbg(&alg_data->adapter.dev, "%s(): xmit %#x [%d]\n", __func__,
 			val, alg_data->mif.len + 1);
 
 		if (alg_data->mif.len == 0) {
 			if (alg_data->last) {
 				/* Wait until the STOP is seen. */
 				if (wait_timeout(I2C_PNX_TIMEOUT, alg_data))
-					dev_err(&adap->dev, "The bus is still "
+					dev_err(&alg_data->adapter.dev, "The bus is still "
 						"active after timeout\n");
 			}
 			/* Disable master interrupts */
@@ -203,14 +199,14 @@ static int i2c_pnx_master_xmit(struct i2c_adapter *adap)
 
 			del_timer_sync(&alg_data->mif.timer);
 
-			dev_dbg(&adap->dev, "%s(): Waking up xfer routine.\n",
+			dev_dbg(&alg_data->adapter.dev, "%s(): Waking up xfer routine.\n",
 				__func__);
 
 			complete(&alg_data->mif.complete);
 		}
 	} else if (alg_data->mif.len == 0) {
 		/* zero-sized transfer */
-		i2c_pnx_stop(adap);
+		i2c_pnx_stop(alg_data);
 
 		/* Disable master interrupts. */
 		iowrite32(ioread32(I2C_REG_CTL(alg_data)) &
@@ -219,13 +215,13 @@ static int i2c_pnx_master_xmit(struct i2c_adapter *adap)
 
 		/* Stop timer. */
 		del_timer_sync(&alg_data->mif.timer);
-		dev_dbg(&adap->dev, "%s(): Waking up xfer routine after "
+		dev_dbg(&alg_data->adapter.dev, "%s(): Waking up xfer routine after "
 			"zero-xfer.\n", __func__);
 
 		complete(&alg_data->mif.complete);
 	}
 
-	dev_dbg(&adap->dev, "%s(): exiting: stat = %04x.\n",
+	dev_dbg(&alg_data->adapter.dev, "%s(): exiting: stat = %04x.\n",
 		__func__, ioread32(I2C_REG_STS(alg_data)));
 
 	return 0;
@@ -237,20 +233,19 @@ static int i2c_pnx_master_xmit(struct i2c_adapter *adap)
  *
  * Reads one byte data from the slave
  */
-static int i2c_pnx_master_rcv(struct i2c_adapter *adap)
+static int i2c_pnx_master_rcv(struct i2c_pnx_algo_data *alg_data)
 {
-	struct i2c_pnx_algo_data *alg_data = adap->algo_data;
 	unsigned int val = 0;
 	u32 ctl = 0;
 
-	dev_dbg(&adap->dev, "%s(): entering: stat = %04x.\n",
+	dev_dbg(&alg_data->adapter.dev, "%s(): entering: stat = %04x.\n",
 		__func__, ioread32(I2C_REG_STS(alg_data)));
 
 	/* Check, whether there is already data,
 	 * or we didn't 'ask' for it yet.
 	 */
 	if (ioread32(I2C_REG_STS(alg_data)) & mstatus_rfe) {
-		dev_dbg(&adap->dev, "%s(): Write dummy data to fill "
+		dev_dbg(&alg_data->adapter.dev, "%s(): Write dummy data to fill "
 			"Rx-fifo...\n", __func__);
 
 		if (alg_data->mif.len == 1) {
@@ -283,7 +278,7 @@ static int i2c_pnx_master_rcv(struct i2c_adapter *adap)
 	if (alg_data->mif.len > 0) {
 		val = ioread32(I2C_REG_RX(alg_data));
 		*alg_data->mif.buf++ = (u8) (val & 0xff);
-		dev_dbg(&adap->dev, "%s(): rcv 0x%x [%d]\n", __func__, val,
+		dev_dbg(&alg_data->adapter.dev, "%s(): rcv 0x%x [%d]\n", __func__, val,
 			alg_data->mif.len);
 
 		alg_data->mif.len--;
@@ -291,7 +286,7 @@ static int i2c_pnx_master_rcv(struct i2c_adapter *adap)
 			if (alg_data->last)
 				/* Wait until the STOP is seen. */
 				if (wait_timeout(I2C_PNX_TIMEOUT, alg_data))
-					dev_err(&adap->dev, "The bus is still "
+					dev_err(&alg_data->adapter.dev, "The bus is still "
 						"active after timeout\n");
 
 			/* Disable master interrupts */
@@ -306,7 +301,7 @@ static int i2c_pnx_master_rcv(struct i2c_adapter *adap)
 		}
 	}
 
-	dev_dbg(&adap->dev, "%s(): exiting: stat = %04x.\n",
+	dev_dbg(&alg_data->adapter.dev, "%s(): exiting: stat = %04x.\n",
 		__func__, ioread32(I2C_REG_STS(alg_data)));
 
 	return 0;
@@ -314,11 +309,10 @@ static int i2c_pnx_master_rcv(struct i2c_adapter *adap)
 
 static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id)
 {
+	struct i2c_pnx_algo_data *alg_data = dev_id;
 	u32 stat, ctl;
-	struct i2c_adapter *adap = dev_id;
-	struct i2c_pnx_algo_data *alg_data = adap->algo_data;
 
-	dev_dbg(&adap->dev, "%s(): mstat = %x mctrl = %x, mode = %d\n",
+	dev_dbg(&alg_data->adapter.dev, "%s(): mstat = %x mctrl = %x, mode = %d\n",
 		__func__,
 		ioread32(I2C_REG_STS(alg_data)),
 		ioread32(I2C_REG_CTL(alg_data)),
@@ -341,10 +335,10 @@ static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id)
 		complete(&alg_data->mif.complete);
 	} else if (stat & mstatus_nai) {
 		/* Slave did not acknowledge, generate a STOP */
-		dev_dbg(&adap->dev, "%s(): "
+		dev_dbg(&alg_data->adapter.dev, "%s(): "
 			"Slave did not acknowledge, generating a STOP.\n",
 			__func__);
-		i2c_pnx_stop(adap);
+		i2c_pnx_stop(alg_data);
 
 		/* Disable master interrupts. */
 		ctl = ioread32(I2C_REG_CTL(alg_data));
@@ -370,9 +364,9 @@ static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id)
 		 */
 		if ((stat & mstatus_drmi) || !(stat & mstatus_rfe)) {
 			if (alg_data->mif.mode == I2C_SMBUS_WRITE) {
-				i2c_pnx_master_xmit(adap);
+				i2c_pnx_master_xmit(alg_data);
 			} else if (alg_data->mif.mode == I2C_SMBUS_READ) {
-				i2c_pnx_master_rcv(adap);
+				i2c_pnx_master_rcv(alg_data);
 			}
 		}
 	}
@@ -381,7 +375,7 @@ static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id)
 	stat = ioread32(I2C_REG_STS(alg_data));
 	iowrite32(stat | mstatus_tdi | mstatus_afi, I2C_REG_STS(alg_data));
 
-	dev_dbg(&adap->dev, "%s(): exiting, stat = %x ctrl = %x.\n",
+	dev_dbg(&alg_data->adapter.dev, "%s(): exiting, stat = %x ctrl = %x.\n",
 		 __func__, ioread32(I2C_REG_STS(alg_data)),
 		 ioread32(I2C_REG_CTL(alg_data)));
 
@@ -390,11 +384,10 @@ static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id)
 
 static void i2c_pnx_timeout(unsigned long data)
 {
-	struct i2c_adapter *adap = (struct i2c_adapter *)data;
-	struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+	struct i2c_pnx_algo_data *alg_data = (struct i2c_pnx_algo_data *)data;
 	u32 ctl;
 
-	dev_err(&adap->dev, "Master timed out. stat = %04x, cntrl = %04x. "
+	dev_err(&alg_data->adapter.dev, "Master timed out. stat = %04x, cntrl = %04x. "
 	       "Resetting master...\n",
 	       ioread32(I2C_REG_STS(alg_data)),
 	       ioread32(I2C_REG_CTL(alg_data)));
@@ -411,15 +404,14 @@ static void i2c_pnx_timeout(unsigned long data)
 	complete(&alg_data->mif.complete);
 }
 
-static inline void bus_reset_if_active(struct i2c_adapter *adap)
+static inline void bus_reset_if_active(struct i2c_pnx_algo_data *alg_data)
 {
-	struct i2c_pnx_algo_data *alg_data = adap->algo_data;
 	u32 stat;
 
 	if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_active) {
-		dev_err(&adap->dev,
+		dev_err(&alg_data->adapter.dev,
 			"%s: Bus is still active after xfer. Reset it...\n",
-		       adap->name);
+		       alg_data->adapter.name);
 		iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset,
 			  I2C_REG_CTL(alg_data));
 		wait_reset(I2C_PNX_TIMEOUT, alg_data);
@@ -453,10 +445,10 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 	struct i2c_pnx_algo_data *alg_data = adap->algo_data;
 	u32 stat = ioread32(I2C_REG_STS(alg_data));
 
-	dev_dbg(&adap->dev, "%s(): entering: %d messages, stat = %04x.\n",
+	dev_dbg(&alg_data->adapter.dev, "%s(): entering: %d messages, stat = %04x.\n",
 		__func__, num, ioread32(I2C_REG_STS(alg_data)));
 
-	bus_reset_if_active(adap);
+	bus_reset_if_active(alg_data);
 
 	/* Process transactions in a loop. */
 	for (i = 0; rc >= 0 && i < num; i++) {
@@ -466,9 +458,9 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 		addr = pmsg->addr;
 
 		if (pmsg->flags & I2C_M_TEN) {
-			dev_err(&adap->dev,
+			dev_err(&alg_data->adapter.dev,
 				"%s: 10 bits addr not supported!\n",
-				adap->name);
+				alg_data->adapter.name);
 			rc = -EINVAL;
 			break;
 		}
@@ -480,11 +472,11 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 		alg_data->mif.ret = 0;
 		alg_data->last = (i == num - 1);
 
-		dev_dbg(&adap->dev, "%s(): mode %d, %d bytes\n", __func__,
+		dev_dbg(&alg_data->adapter.dev, "%s(): mode %d, %d bytes\n", __func__,
 			alg_data->mif.mode,
 			alg_data->mif.len);
 
-		i2c_pnx_arm_timer(adap);
+		i2c_pnx_arm_timer(alg_data);
 
 		/* initialize the completion var */
 		init_completion(&alg_data->mif.complete);
@@ -495,7 +487,7 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 			  I2C_REG_CTL(alg_data));
 
 		/* Put start-code and slave-address on the bus. */
-		rc = i2c_pnx_start(addr, adap);
+		rc = i2c_pnx_start(addr, alg_data);
 		if (rc < 0)
 			break;
 
@@ -504,31 +496,31 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 
 		if (!(rc = alg_data->mif.ret))
 			completed++;
-		dev_dbg(&adap->dev, "%s(): Complete, return code = %d.\n",
+		dev_dbg(&alg_data->adapter.dev, "%s(): Complete, return code = %d.\n",
 			__func__, rc);
 
 		/* Clear TDI and AFI bits in case they are set. */
 		if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_tdi) {
-			dev_dbg(&adap->dev,
+			dev_dbg(&alg_data->adapter.dev,
 				"%s: TDI still set... clearing now.\n",
-			       adap->name);
+				alg_data->adapter.name);
 			iowrite32(stat, I2C_REG_STS(alg_data));
 		}
 		if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_afi) {
-			dev_dbg(&adap->dev,
+			dev_dbg(&alg_data->adapter.dev,
 				"%s: AFI still set... clearing now.\n",
-			       adap->name);
+				alg_data->adapter.name);
 			iowrite32(stat, I2C_REG_STS(alg_data));
 		}
 	}
 
-	bus_reset_if_active(adap);
+	bus_reset_if_active(alg_data);
 
 	/* Cleanup to be sure... */
 	alg_data->mif.buf = NULL;
 	alg_data->mif.len = 0;
 
-	dev_dbg(&adap->dev, "%s(): exiting, stat = %x\n",
+	dev_dbg(&alg_data->adapter.dev, "%s(): exiting, stat = %x\n",
 		__func__, ioread32(I2C_REG_STS(alg_data)));
 
 	if (completed != num)
@@ -609,7 +601,7 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev)
 
 	init_timer(&alg_data->mif.timer);
 	alg_data->mif.timer.function = i2c_pnx_timeout;
-	alg_data->mif.timer.data = (unsigned long)&alg_data->adapter;
+	alg_data->mif.timer.data = (unsigned long)alg_data;
 
 	/* Register I/O resource */
 	if (!request_mem_region(i2c_pnx->base, I2C_PNX_REGION_SIZE,
@@ -657,7 +649,7 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev)
 	init_completion(&alg_data->mif.complete);
 
 	ret = request_irq(i2c_pnx->irq, i2c_pnx_interrupt,
-			0, pdev->name, &alg_data->adapter);
+			0, pdev->name, alg_data);
 	if (ret)
 		goto out_clock;
 
@@ -674,7 +666,7 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev)
 	return 0;
 
 out_irq:
-	free_irq(i2c_pnx->irq, &alg_data->adapter);
+	free_irq(i2c_pnx->irq, alg_data);
 out_clock:
 	clk_disable(alg_data->clk);
 out_unmap:
@@ -696,7 +688,7 @@ static int __devexit i2c_pnx_remove(struct platform_device *pdev)
 	struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev);
 	struct i2c_pnx_data *i2c_pnx = alg_data->i2c_pnx;
 
-	free_irq(i2c_pnx->irq, &alg_data->adapter);
+	free_irq(i2c_pnx->irq, alg_data);
 	i2c_del_adapter(&alg_data->adapter);
 	clk_disable(alg_data->clk);
 	iounmap(alg_data->ioaddr);
-- 
cgit v1.2.2


From 4be53dbe74818a12cc737a89b5d0aec6095956e0 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sat, 21 Nov 2009 12:46:31 +0000
Subject: ARM: PNX4008: i2c-pnx: don't split messages across several lines

It makes them harder to grep for.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/i2c/busses/i2c-pnx.c | 81 ++++++++++++++++++++++++--------------------
 1 file changed, 44 insertions(+), 37 deletions(-)

(limited to 'drivers/i2c')

diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 181e69211e4f..afc9c968deec 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -86,25 +86,26 @@ static int i2c_pnx_start(unsigned char slave_addr,
 
 	/* Check for 7 bit slave addresses only */
 	if (slave_addr & ~0x7f) {
-		dev_err(&alg_data->adapter.dev, "%s: Invalid slave address %x. "
-		       "Only 7-bit addresses are supported\n",
-		       alg_data->adapter.name, slave_addr);
+		dev_err(&alg_data->adapter.dev,
+			"%s: Invalid slave address %x. Only 7-bit addresses are supported\n",
+			alg_data->adapter.name, slave_addr);
 		return -EINVAL;
 	}
 
 	/* First, make sure bus is idle */
 	if (wait_timeout(I2C_PNX_TIMEOUT, alg_data)) {
 		/* Somebody else is monopolizing the bus */
-		dev_err(&alg_data->adapter.dev, "%s: Bus busy. Slave addr = %02x, "
-		       "cntrl = %x, stat = %x\n",
-		       alg_data->adapter.name, slave_addr,
-		       ioread32(I2C_REG_CTL(alg_data)),
-		       ioread32(I2C_REG_STS(alg_data)));
+		dev_err(&alg_data->adapter.dev,
+			"%s: Bus busy. Slave addr = %02x, cntrl = %x, stat = %x\n",
+			alg_data->adapter.name, slave_addr,
+			ioread32(I2C_REG_CTL(alg_data)),
+			ioread32(I2C_REG_STS(alg_data)));
 		return -EBUSY;
 	} else if (ioread32(I2C_REG_STS(alg_data)) & mstatus_afi) {
 		/* Sorry, we lost the bus */
-		dev_err(&alg_data->adapter.dev, "%s: Arbitration failure. "
-		       "Slave addr = %02x\n", alg_data->adapter.name, slave_addr);
+		dev_err(&alg_data->adapter.dev,
+		        "%s: Arbitration failure. Slave addr = %02x\n",
+			alg_data->adapter.name, slave_addr);
 		return -EIO;
 	}
 
@@ -182,15 +183,15 @@ static int i2c_pnx_master_xmit(struct i2c_pnx_algo_data *alg_data)
 		alg_data->mif.len--;
 		iowrite32(val, I2C_REG_TX(alg_data));
 
-		dev_dbg(&alg_data->adapter.dev, "%s(): xmit %#x [%d]\n", __func__,
-			val, alg_data->mif.len + 1);
+		dev_dbg(&alg_data->adapter.dev, "%s(): xmit %#x [%d]\n",
+			__func__, val, alg_data->mif.len + 1);
 
 		if (alg_data->mif.len == 0) {
 			if (alg_data->last) {
 				/* Wait until the STOP is seen. */
 				if (wait_timeout(I2C_PNX_TIMEOUT, alg_data))
-					dev_err(&alg_data->adapter.dev, "The bus is still "
-						"active after timeout\n");
+					dev_err(&alg_data->adapter.dev,
+						"The bus is still active after timeout\n");
 			}
 			/* Disable master interrupts */
 			iowrite32(ioread32(I2C_REG_CTL(alg_data)) &
@@ -199,7 +200,8 @@ static int i2c_pnx_master_xmit(struct i2c_pnx_algo_data *alg_data)
 
 			del_timer_sync(&alg_data->mif.timer);
 
-			dev_dbg(&alg_data->adapter.dev, "%s(): Waking up xfer routine.\n",
+			dev_dbg(&alg_data->adapter.dev,
+				"%s(): Waking up xfer routine.\n",
 				__func__);
 
 			complete(&alg_data->mif.complete);
@@ -215,8 +217,9 @@ static int i2c_pnx_master_xmit(struct i2c_pnx_algo_data *alg_data)
 
 		/* Stop timer. */
 		del_timer_sync(&alg_data->mif.timer);
-		dev_dbg(&alg_data->adapter.dev, "%s(): Waking up xfer routine after "
-			"zero-xfer.\n", __func__);
+		dev_dbg(&alg_data->adapter.dev,
+			"%s(): Waking up xfer routine after zero-xfer.\n",
+			__func__);
 
 		complete(&alg_data->mif.complete);
 	}
@@ -245,8 +248,9 @@ static int i2c_pnx_master_rcv(struct i2c_pnx_algo_data *alg_data)
 	 * or we didn't 'ask' for it yet.
 	 */
 	if (ioread32(I2C_REG_STS(alg_data)) & mstatus_rfe) {
-		dev_dbg(&alg_data->adapter.dev, "%s(): Write dummy data to fill "
-			"Rx-fifo...\n", __func__);
+		dev_dbg(&alg_data->adapter.dev,
+			"%s(): Write dummy data to fill Rx-fifo...\n",
+			__func__);
 
 		if (alg_data->mif.len == 1) {
 			/* Last byte, do not acknowledge next rcv. */
@@ -278,16 +282,16 @@ static int i2c_pnx_master_rcv(struct i2c_pnx_algo_data *alg_data)
 	if (alg_data->mif.len > 0) {
 		val = ioread32(I2C_REG_RX(alg_data));
 		*alg_data->mif.buf++ = (u8) (val & 0xff);
-		dev_dbg(&alg_data->adapter.dev, "%s(): rcv 0x%x [%d]\n", __func__, val,
-			alg_data->mif.len);
+		dev_dbg(&alg_data->adapter.dev, "%s(): rcv 0x%x [%d]\n",
+			__func__, val, alg_data->mif.len);
 
 		alg_data->mif.len--;
 		if (alg_data->mif.len == 0) {
 			if (alg_data->last)
 				/* Wait until the STOP is seen. */
 				if (wait_timeout(I2C_PNX_TIMEOUT, alg_data))
-					dev_err(&alg_data->adapter.dev, "The bus is still "
-						"active after timeout\n");
+					dev_err(&alg_data->adapter.dev,
+						"The bus is still active after timeout\n");
 
 			/* Disable master interrupts */
 			ctl = ioread32(I2C_REG_CTL(alg_data));
@@ -312,7 +316,8 @@ static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id)
 	struct i2c_pnx_algo_data *alg_data = dev_id;
 	u32 stat, ctl;
 
-	dev_dbg(&alg_data->adapter.dev, "%s(): mstat = %x mctrl = %x, mode = %d\n",
+	dev_dbg(&alg_data->adapter.dev,
+		"%s(): mstat = %x mctrl = %x, mode = %d\n",
 		__func__,
 		ioread32(I2C_REG_STS(alg_data)),
 		ioread32(I2C_REG_CTL(alg_data)),
@@ -335,8 +340,8 @@ static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id)
 		complete(&alg_data->mif.complete);
 	} else if (stat & mstatus_nai) {
 		/* Slave did not acknowledge, generate a STOP */
-		dev_dbg(&alg_data->adapter.dev, "%s(): "
-			"Slave did not acknowledge, generating a STOP.\n",
+		dev_dbg(&alg_data->adapter.dev,
+			"%s(): Slave did not acknowledge, generating a STOP.\n",
 			__func__);
 		i2c_pnx_stop(alg_data);
 
@@ -375,7 +380,8 @@ static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id)
 	stat = ioread32(I2C_REG_STS(alg_data));
 	iowrite32(stat | mstatus_tdi | mstatus_afi, I2C_REG_STS(alg_data));
 
-	dev_dbg(&alg_data->adapter.dev, "%s(): exiting, stat = %x ctrl = %x.\n",
+	dev_dbg(&alg_data->adapter.dev,
+		"%s(): exiting, stat = %x ctrl = %x.\n",
 		 __func__, ioread32(I2C_REG_STS(alg_data)),
 		 ioread32(I2C_REG_CTL(alg_data)));
 
@@ -387,10 +393,10 @@ static void i2c_pnx_timeout(unsigned long data)
 	struct i2c_pnx_algo_data *alg_data = (struct i2c_pnx_algo_data *)data;
 	u32 ctl;
 
-	dev_err(&alg_data->adapter.dev, "Master timed out. stat = %04x, cntrl = %04x. "
-	       "Resetting master...\n",
-	       ioread32(I2C_REG_STS(alg_data)),
-	       ioread32(I2C_REG_CTL(alg_data)));
+	dev_err(&alg_data->adapter.dev,
+		"Master timed out. stat = %04x, cntrl = %04x. Resetting master...\n",
+		ioread32(I2C_REG_STS(alg_data)),
+		ioread32(I2C_REG_CTL(alg_data)));
 
 	/* Reset master and disable interrupts */
 	ctl = ioread32(I2C_REG_CTL(alg_data));
@@ -411,7 +417,7 @@ static inline void bus_reset_if_active(struct i2c_pnx_algo_data *alg_data)
 	if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_active) {
 		dev_err(&alg_data->adapter.dev,
 			"%s: Bus is still active after xfer. Reset it...\n",
-		       alg_data->adapter.name);
+			alg_data->adapter.name);
 		iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset,
 			  I2C_REG_CTL(alg_data));
 		wait_reset(I2C_PNX_TIMEOUT, alg_data);
@@ -445,7 +451,8 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 	struct i2c_pnx_algo_data *alg_data = adap->algo_data;
 	u32 stat = ioread32(I2C_REG_STS(alg_data));
 
-	dev_dbg(&alg_data->adapter.dev, "%s(): entering: %d messages, stat = %04x.\n",
+	dev_dbg(&alg_data->adapter.dev,
+		"%s(): entering: %d messages, stat = %04x.\n",
 		__func__, num, ioread32(I2C_REG_STS(alg_data)));
 
 	bus_reset_if_active(alg_data);
@@ -472,9 +479,8 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 		alg_data->mif.ret = 0;
 		alg_data->last = (i == num - 1);
 
-		dev_dbg(&alg_data->adapter.dev, "%s(): mode %d, %d bytes\n", __func__,
-			alg_data->mif.mode,
-			alg_data->mif.len);
+		dev_dbg(&alg_data->adapter.dev, "%s(): mode %d, %d bytes\n",
+			__func__, alg_data->mif.mode, alg_data->mif.len);
 
 		i2c_pnx_arm_timer(alg_data);
 
@@ -496,7 +502,8 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 
 		if (!(rc = alg_data->mif.ret))
 			completed++;
-		dev_dbg(&alg_data->adapter.dev, "%s(): Complete, return code = %d.\n",
+		dev_dbg(&alg_data->adapter.dev,
+			"%s(): Complete, return code = %d.\n",
 			__func__, rc);
 
 		/* Clear TDI and AFI bits in case they are set. */
-- 
cgit v1.2.2


From 7e20c837208f6fdd553d04f5fe3e80f44570698b Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sat, 21 Nov 2009 12:56:13 +0000
Subject: ARM: PNX4008: i2c-pnx makes no use of asm/uaccess.h nor asm/irq.h

Remove unnecessary includes

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/i2c/busses/i2c-pnx.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'drivers/i2c')

diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index afc9c968deec..ecdd5230ae36 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -25,8 +25,6 @@
 
 #include <mach/hardware.h>
 #include <mach/i2c.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
 
 #define I2C_PNX_TIMEOUT		10 /* msec */
 #define I2C_PNX_SPEED_KHZ	100
-- 
cgit v1.2.2


From eed18b5fa4d297c681b00144e8c6942dd35d39a7 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sat, 21 Nov 2009 12:58:13 +0000
Subject: ARM: PNX4008: use msecs_to_jiffies() rather than open-coding it

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/i2c/busses/i2c-pnx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/i2c')

diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index ecdd5230ae36..2b0bd0b042d6 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -53,14 +53,14 @@ static inline int wait_reset(long timeout, struct i2c_pnx_algo_data *data)
 static inline void i2c_pnx_arm_timer(struct i2c_pnx_algo_data *alg_data)
 {
 	struct timer_list *timer = &alg_data->mif.timer;
-	int expires = I2C_PNX_TIMEOUT / (1000 / HZ);
+	unsigned long expires = msecs_to_jiffies(I2C_PNX_TIMEOUT);
 
 	if (expires <= 1)
 		expires = 2;
 
 	del_timer_sync(timer);
 
-	dev_dbg(&alg_data->adapter.dev, "Timer armed at %lu plus %u jiffies.\n",
+	dev_dbg(&alg_data->adapter.dev, "Timer armed at %lu plus %lu jiffies.\n",
 		jiffies, expires);
 
 	timer->expires = jiffies + expires;
-- 
cgit v1.2.2