From 9df013b3e46c67dd3745df91eaccdc719118e0cc Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 14 Oct 2008 17:30:02 +0200 Subject: i2c/isp1301_omap: Convert to a new-style i2c driver, part 2 Based on David Brownell's patch for tps65010 and previous work by Felipe Balbi, this patch finishes converting isp1301_omap to a new-style i2c driver. There's definitely room for further drivers cleanups, but these are out of the scope of this patch. Signed-off-by: Jean Delvare Acked-by: Tony Lindgren --- drivers/i2c/chips/isp1301_omap.c | 98 ++++++++++++++-------------------------- 1 file changed, 33 insertions(+), 65 deletions(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c index 8444fc6fbf61..28902ebd5539 100644 --- a/drivers/i2c/chips/isp1301_omap.c +++ b/drivers/i2c/chips/isp1301_omap.c @@ -50,10 +50,8 @@ MODULE_LICENSE("GPL"); struct isp1301 { struct otg_transceiver otg; struct i2c_client *client; - struct i2c_client c; void (*i2c_release)(struct device *dev); - int irq; int irq_type; u32 last_otg_ctrl; @@ -139,14 +137,6 @@ static inline void notresponding(struct isp1301 *isp) /*-------------------------------------------------------------------------*/ -/* only two addresses possible */ -#define ISP_BASE 0x2c -static unsigned short normal_i2c[] = { - ISP_BASE, ISP_BASE + 1, - I2C_CLIENT_END }; - -I2C_CLIENT_INSMOD; - static struct i2c_driver isp1301_driver; /* smbus apis are used for portability */ @@ -1230,7 +1220,7 @@ static void isp1301_release(struct device *dev) static struct isp1301 *the_transceiver; -static int isp1301_detach_client(struct i2c_client *i2c) +static int __exit isp1301_remove(struct i2c_client *i2c) { struct isp1301 *isp; @@ -1238,7 +1228,7 @@ static int isp1301_detach_client(struct i2c_client *i2c) isp1301_clear_bits(isp, ISP1301_INTERRUPT_FALLING, ~0); isp1301_clear_bits(isp, ISP1301_INTERRUPT_RISING, ~0); - free_irq(isp->irq, isp); + free_irq(i2c->irq, isp); #ifdef CONFIG_USB_OTG otg_unbind(isp); #endif @@ -1253,7 +1243,7 @@ static int isp1301_detach_client(struct i2c_client *i2c) put_device(&i2c->dev); the_transceiver = 0; - return i2c_detach_client(i2c); + return 0; } /*-------------------------------------------------------------------------*/ @@ -1509,12 +1499,10 @@ isp1301_start_hnp(struct otg_transceiver *dev) /*-------------------------------------------------------------------------*/ -/* no error returns, they'd just make bus scanning stop */ -static int isp1301_probe(struct i2c_adapter *bus, int address, int kind) +static int __init isp1301_probe(struct i2c_client *i2c) { int status; struct isp1301 *isp; - struct i2c_client *i2c; if (the_transceiver) return 0; @@ -1528,37 +1516,19 @@ static int isp1301_probe(struct i2c_adapter *bus, int address, int kind) isp->timer.function = isp1301_timer; isp->timer.data = (unsigned long) isp; - isp->irq = -1; - isp->c.addr = address; - i2c_set_clientdata(&isp->c, isp); - isp->c.adapter = bus; - isp->c.driver = &isp1301_driver; - strlcpy(isp->c.name, DRIVER_NAME, I2C_NAME_SIZE); - isp->client = i2c = &isp->c; - - /* if this is a true probe, verify the chip ... */ - if (kind < 0) { - status = isp1301_get_u16(isp, ISP1301_VENDOR_ID); - if (status != I2C_VENDOR_ID_PHILIPS) { - dev_dbg(&bus->dev, "addr %d not philips id: %d\n", - address, status); - goto fail1; - } - status = isp1301_get_u16(isp, ISP1301_PRODUCT_ID); - if (status != I2C_PRODUCT_ID_PHILIPS_1301) { - dev_dbg(&bus->dev, "%d not isp1301, %d\n", - address, status); - goto fail1; - } - } + i2c_set_clientdata(i2c, isp); + isp->client = i2c; - status = i2c_attach_client(i2c); - if (status < 0) { - dev_dbg(&bus->dev, "can't attach %s to device %d, err %d\n", - DRIVER_NAME, address, status); -fail1: - kfree(isp); - return 0; + /* verify the chip (shouldn't be necesary) */ + status = isp1301_get_u16(isp, ISP1301_VENDOR_ID); + if (status != I2C_VENDOR_ID_PHILIPS) { + dev_dbg(&i2c->dev, "not philips id: %d\n", status); + goto fail; + } + status = isp1301_get_u16(isp, ISP1301_PRODUCT_ID); + if (status != I2C_PRODUCT_ID_PHILIPS_1301) { + dev_dbg(&i2c->dev, "not isp1301, %d\n", status); + goto fail; } isp->i2c_release = i2c->dev.release; i2c->dev.release = isp1301_release; @@ -1587,7 +1557,7 @@ fail1: status = otg_bind(isp); if (status < 0) { dev_dbg(&i2c->dev, "can't bind OTG\n"); - goto fail2; + goto fail; } #endif @@ -1600,26 +1570,21 @@ fail1: /* IRQ wired at M14 */ omap_cfg_reg(M14_1510_GPIO2); - isp->irq = OMAP_GPIO_IRQ(2); if (gpio_request(2, "isp1301") == 0) gpio_direction_input(2); isp->irq_type = IRQF_TRIGGER_FALLING; } isp->irq_type |= IRQF_SAMPLE_RANDOM; - status = request_irq(isp->irq, isp1301_irq, + status = request_irq(i2c->irq, isp1301_irq, isp->irq_type, DRIVER_NAME, isp); if (status < 0) { dev_dbg(&i2c->dev, "can't get IRQ %d, err %d\n", - isp->irq, status); -#ifdef CONFIG_USB_OTG -fail2: -#endif - i2c_detach_client(i2c); - goto fail1; + i2c->irq, status); + goto fail; } - isp->otg.dev = &isp->client->dev; + isp->otg.dev = &i2c->dev; isp->otg.label = DRIVER_NAME; isp->otg.set_host = isp1301_set_host, @@ -1650,22 +1615,25 @@ fail2: status); return 0; -} -static int isp1301_scan_bus(struct i2c_adapter *bus) -{ - if (!i2c_check_functionality(bus, I2C_FUNC_SMBUS_BYTE_DATA - | I2C_FUNC_SMBUS_READ_WORD_DATA)) - return -EINVAL; - return i2c_probe(bus, &addr_data, isp1301_probe); +fail: + kfree(isp); + return -ENODEV; } +static const struct i2c_device_id isp1301_id[] = { + { "isp1301_omap", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, isp1301_id); + static struct i2c_driver isp1301_driver = { .driver = { .name = "isp1301_omap", }, - .attach_adapter = isp1301_scan_bus, - .detach_client = isp1301_detach_client, + .probe = isp1301_probe, + .remove = __exit_p(isp1301_remove), + .id_table = isp1301_id, }; /*-------------------------------------------------------------------------*/ -- cgit v1.2.2