From 279e902445557897707d325182916a6e28ba80de Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 14 Jul 2008 22:38:21 +0200 Subject: i2c-nforce2: Add support for multiplexing on the Tyan S4985 Just like the Tyan S4882, the S4985 uses a multiplexer to give access to all 16 memory module SPD EEPROMs. This specific i2c-nforce2-s4985 driver adds support for this. It is heavily based on the older i2c-amd756-s4882 driver. As more mainboards will use multiplexer chips, we will have to find a way to support them without having to write a new specfic driver for each. The recent changes to the i2c subsystem should help us, and the new gpio subsystem might help, too. Signed-off-by: Jean Delvare --- drivers/i2c/busses/Kconfig | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'drivers/i2c/busses/Kconfig') diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 48438cc5d0ca..00d76e13588f 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -315,6 +315,19 @@ config I2C_NFORCE2 This driver can also be built as a module. If so, the module will be called i2c-nforce2. +config I2C_NFORCE2_S4985 + tristate "SMBus multiplexing on the Tyan S4985" + depends on I2C_NFORCE2 && EXPERIMENTAL + help + Enabling this option will add specific SMBus support for the Tyan + S4985 motherboard. On this 4-CPU board, the SMBus is multiplexed + over 4 different channels, where the various memory module EEPROMs + live. Saying yes here will give you access to these in addition + to the trunk. + + This driver can also be built as a module. If so, the module + will be called i2c-nforce2-s4985. + config I2C_OCORES tristate "OpenCores I2C Controller" depends on EXPERIMENTAL -- cgit v1.2.2