From c10b3ee8aa7b26875a8ec0afb6f6323810b35043 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Fri, 23 Mar 2012 10:02:18 +0100 Subject: hwmon: (w83795) Fix multi-line comments Signed-off-by: Guenter Roeck Signed-off-by: Jean Delvare --- drivers/hwmon/w83795.c | 94 +++++++++++++++++++++++++++++++++----------------- 1 file changed, 62 insertions(+), 32 deletions(-) (limited to 'drivers/hwmon') diff --git a/drivers/hwmon/w83795.c b/drivers/hwmon/w83795.c index 5478dd136233..d887cb3b72e8 100644 --- a/drivers/hwmon/w83795.c +++ b/drivers/hwmon/w83795.c @@ -72,8 +72,10 @@ MODULE_PARM_DESC(reset, "Set to 1 to reset chip, not recommended"); #define TEMP_CRIT_HYST 2 #define TEMP_WARN 3 #define TEMP_WARN_HYST 4 -/* only crit and crit_hyst affect real-time alarm status - * current crit crit_hyst warn warn_hyst */ +/* + * only crit and crit_hyst affect real-time alarm status + * current crit crit_hyst warn warn_hyst + */ static const u16 W83795_REG_TEMP[][5] = { {0x21, 0x96, 0x97, 0x98, 0x99}, /* TD1/TR1 */ {0x22, 0x9a, 0x9b, 0x9c, 0x9d}, /* TD2/TR2 */ @@ -354,26 +356,34 @@ struct w83795_data { u8 temp_mode; /* Bit vector, 0 = TR, 1 = TD */ u8 temp_src[3]; /* Register value */ - u8 enable_dts; /* Enable PECI and SB-TSI, + u8 enable_dts; /* + * Enable PECI and SB-TSI, * bit 0: =1 enable, =0 disable, - * bit 1: =1 AMD SB-TSI, =0 Intel PECI */ + * bit 1: =1 AMD SB-TSI, =0 Intel PECI + */ u8 has_dts; /* Enable monitor DTS temp */ s8 dts[8]; /* Register value */ u8 dts_read_vrlsb[8]; /* Register value */ s8 dts_ext[4]; /* Register value */ - u8 has_pwm; /* 795g supports 8 pwm, 795adg only supports 2, + u8 has_pwm; /* + * 795g supports 8 pwm, 795adg only supports 2, * no config register, only affected by chip - * type */ - u8 pwm[8][5]; /* Register value, output, freq, start, - * non stop, stop time */ + * type + */ + u8 pwm[8][5]; /* + * Register value, output, freq, start, + * non stop, stop time + */ u16 clkin; /* CLKIN frequency in kHz */ u8 pwm_fcms[2]; /* Register value */ u8 pwm_tfmr[6]; /* Register value */ u8 pwm_fomc; /* Register value */ - u16 target_speed[8]; /* Register value, target speed for speed - * cruise */ + u16 target_speed[8]; /* + * Register value, target speed for speed + * cruise + */ u8 tol_speed; /* tolerance of target speed */ u8 pwm_temp[6][4]; /* TTTI, CTFS, HCT, HOT */ u8 sf4_reg[6][2][7]; /* 6 temp, temp/dcpwm, 7 registers */ @@ -482,8 +492,10 @@ static void w83795_update_limits(struct i2c_client *client) /* Read the fan limits */ lsb = 0; /* Silent false gcc warning */ for (i = 0; i < ARRAY_SIZE(data->fan); i++) { - /* Each register contains LSB for 2 fans, but we want to - * read it only once to save time */ + /* + * Each register contains LSB for 2 fans, but we want to + * read it only once to save time + */ if ((i & 1) == 0 && (data->has_fan & (3 << i))) lsb = w83795_read(client, W83795_REG_FAN_MIN_LSB(i)); @@ -665,9 +677,11 @@ static struct w83795_data *w83795_update_device(struct device *dev) w83795_read(client, W83795_REG_PWM(i, PWM_OUTPUT)); } - /* Update intrusion and alarms + /* + * Update intrusion and alarms * It is important to read intrusion first, because reading from - * register SMI STS6 clears the interrupt status temporarily. */ + * register SMI STS6 clears the interrupt status temporarily. + */ tmp = w83795_read(client, W83795_REG_ALARM_CTRL); /* Switch to interrupt status for intrusion if needed */ if (tmp & ALARM_CTRL_RTSACS) @@ -1603,8 +1617,10 @@ store_sf_setup(struct device *dev, struct device_attribute *attr, #define NOT_USED -1 -/* Don't change the attribute order, _max, _min and _beep are accessed by index - * somewhere else in the code */ +/* + * Don't change the attribute order, _max, _min and _beep are accessed by index + * somewhere else in the code + */ #define SENSOR_ATTR_IN(index) { \ SENSOR_ATTR_2(in##index##_input, S_IRUGO, show_in, NULL, \ IN_READ, index), \ @@ -1618,8 +1634,10 @@ store_sf_setup(struct device *dev, struct device_attribute *attr, show_alarm_beep, store_beep, BEEP_ENABLE, \ index + ((index > 14) ? 1 : 0)) } -/* Don't change the attribute order, _beep is accessed by index - * somewhere else in the code */ +/* + * Don't change the attribute order, _beep is accessed by index + * somewhere else in the code + */ #define SENSOR_ATTR_FAN(index) { \ SENSOR_ATTR_2(fan##index##_input, S_IRUGO, show_fan, \ NULL, FAN_INPUT, index - 1), \ @@ -1648,8 +1666,10 @@ store_sf_setup(struct device *dev, struct device_attribute *attr, SENSOR_ATTR_2(fan##index##_target, S_IWUSR | S_IRUGO, \ show_fanin, store_fanin, FANIN_TARGET, index - 1) } -/* Don't change the attribute order, _beep is accessed by index - * somewhere else in the code */ +/* + * Don't change the attribute order, _beep is accessed by index + * somewhere else in the code + */ #define SENSOR_ATTR_DTS(index) { \ SENSOR_ATTR_2(temp##index##_type, S_IRUGO , \ show_dts_mode, NULL, NOT_USED, index - 7), \ @@ -1668,8 +1688,10 @@ store_sf_setup(struct device *dev, struct device_attribute *attr, SENSOR_ATTR_2(temp##index##_beep, S_IWUSR | S_IRUGO, \ show_alarm_beep, store_beep, BEEP_ENABLE, index + 17) } -/* Don't change the attribute order, _beep is accessed by index - * somewhere else in the code */ +/* + * Don't change the attribute order, _beep is accessed by index + * somewhere else in the code + */ #define SENSOR_ATTR_TEMP(index) { \ SENSOR_ATTR_2(temp##index##_type, S_IRUGO | (index < 4 ? S_IWUSR : 0), \ show_temp_mode, store_temp_mode, NOT_USED, index - 1), \ @@ -1875,8 +1897,10 @@ static int w83795_get_device_id(struct i2c_client *client) device_id = i2c_smbus_read_byte_data(client, W83795_REG_DEVICEID); - /* Special case for rev. A chips; can't be checked first because later - revisions emulate this for compatibility */ + /* + * Special case for rev. A chips; can't be checked first because later + * revisions emulate this for compatibility + */ if (device_id < 0 || (device_id & 0xf0) != 0x50) { int alt_id; @@ -1928,8 +1952,10 @@ static int w83795_detect(struct i2c_client *client, return -ENODEV; } - /* If Nuvoton chip, address of chip and W83795_REG_I2C_ADDR - should match */ + /* + * If Nuvoton chip, address of chip and W83795_REG_I2C_ADDR + * should match + */ if ((bank & 0x07) == 0) { i2c_addr = i2c_smbus_read_byte_data(client, W83795_REG_I2C_ADDR); @@ -1941,10 +1967,12 @@ static int w83795_detect(struct i2c_client *client, } } - /* Check 795 chip type: 795G or 795ADG - Usually we don't write to chips during detection, but here we don't - quite have the choice; hopefully it's OK, we are about to return - success anyway */ + /* + * Check 795 chip type: 795G or 795ADG + * Usually we don't write to chips during detection, but here we don't + * quite have the choice; hopefully it's OK, we are about to return + * success anyway + */ if ((bank & 0x07) != 0) i2c_smbus_write_byte_data(client, W83795_REG_BANKSEL, bank & ~0x07); @@ -2193,8 +2221,10 @@ static int w83795_probe(struct i2c_client *client, /* The W83795G has a dedicated BEEP pin */ data->enable_beep = 1; } else { - /* The W83795ADG has a shared pin for OVT# and BEEP, so you - * can't have both */ + /* + * The W83795ADG has a shared pin for OVT# and BEEP, so you + * can't have both + */ tmp = w83795_read(client, W83795_REG_OVT_CFG); if ((tmp & OVT_CFG_SEL) == 0) data->enable_beep = 1; -- cgit v1.2.2