From a8ca103793350bd66280d56ee58870c682b54e75 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 12 Jan 2011 21:55:10 +0100 Subject: hwmon: (it87) Use pr_fmt and pr_ Added #define pr_fmt KBUILD_MODNAME ": " fmt Converted printks to pr_ Coalesced any long formats Removed prefixes from formats Signed-off-by: Joe Perches Signed-off-by: Jean Delvare --- drivers/hwmon/it87.c | 30 ++++++++++++++---------------- 1 file changed, 14 insertions(+), 16 deletions(-) (limited to 'drivers/hwmon') diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index a428a9264195..316b64823f7b 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -38,6 +38,8 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include #include #include @@ -1570,26 +1572,25 @@ static int __init it87_find(unsigned short *address, case 0xffff: /* No device at all */ goto exit; default: - pr_debug(DRVNAME ": Unsupported chip (DEVID=0x%x)\n", - chip_type); + pr_debug("Unsupported chip (DEVID=0x%x)\n", chip_type); goto exit; } superio_select(PME); if (!(superio_inb(IT87_ACT_REG) & 0x01)) { - pr_info("it87: Device not activated, skipping\n"); + pr_info("Device not activated, skipping\n"); goto exit; } *address = superio_inw(IT87_BASE_REG) & ~(IT87_EXTENT - 1); if (*address == 0) { - pr_info("it87: Base address not set, skipping\n"); + pr_info("Base address not set, skipping\n"); goto exit; } err = 0; sio_data->revision = superio_inb(DEVREV) & 0x0f; - pr_info("it87: Found IT%04xF chip at 0x%x, revision %d\n", + pr_info("Found IT%04xF chip at 0x%x, revision %d\n", chip_type, *address, sio_data->revision); /* in8 (Vbat) is always internal */ @@ -1615,7 +1616,7 @@ static int __init it87_find(unsigned short *address, } else { /* We need at least 4 VID pins */ if (reg & 0x0f) { - pr_info("it87: VID is disabled (pins used for GPIO)\n"); + pr_info("VID is disabled (pins used for GPIO)\n"); sio_data->skip_vid = 1; } } @@ -1651,7 +1652,7 @@ static int __init it87_find(unsigned short *address, if (sio_data->type == it8720 && !(reg & (1 << 1))) { reg |= (1 << 1); superio_outb(IT87_SIO_PINX2_REG, reg); - pr_notice("it87: Routing internal VCCH to in7\n"); + pr_notice("Routing internal VCCH to in7\n"); } if (reg & (1 << 0)) sio_data->internal |= (1 << 0); @@ -1661,7 +1662,7 @@ static int __init it87_find(unsigned short *address, sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f; } if (sio_data->beep_pin) - pr_info("it87: Beeping is supported\n"); + pr_info("Beeping is supported\n"); /* Disable specific features based on DMI strings */ board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR); @@ -1675,8 +1676,7 @@ static int __init it87_find(unsigned short *address, the PWM2 duty cycle, so we disable it. I use the board name string as the trigger in case the same board is ever used in other systems. */ - pr_info("it87: Disabling pwm2 due to " - "hardware constraints\n"); + pr_info("Disabling pwm2 due to hardware constraints\n"); sio_data->skip_pwm = (1 << 1); } } @@ -2189,28 +2189,26 @@ static int __init it87_device_add(unsigned short address, pdev = platform_device_alloc(DRVNAME, address); if (!pdev) { err = -ENOMEM; - printk(KERN_ERR DRVNAME ": Device allocation failed\n"); + pr_err("Device allocation failed\n"); goto exit; } err = platform_device_add_resources(pdev, &res, 1); if (err) { - printk(KERN_ERR DRVNAME ": Device resource addition failed " - "(%d)\n", err); + pr_err("Device resource addition failed (%d)\n", err); goto exit_device_put; } err = platform_device_add_data(pdev, sio_data, sizeof(struct it87_sio_data)); if (err) { - printk(KERN_ERR DRVNAME ": Platform data allocation failed\n"); + pr_err("Platform data allocation failed\n"); goto exit_device_put; } err = platform_device_add(pdev); if (err) { - printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n", - err); + pr_err("Device addition failed (%d)\n", err); goto exit_device_put; } -- cgit v1.2.2