From 119f5e448d32c11faf22fe81f6f2d78467a47149 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 13 Mar 2013 20:32:13 +0900 Subject: gpio: Renesas R-Car GPIO driver V3 This patch is V3 of a GPIO driver for the R-Car series of SoCs from Renesas. This driver is designed to be reusable between multiple SoCs that share the same basic building block, but so far it has only been used on R-Car H1 (r8a7779). Each driver instance handles 32 GPIOs with individually maskable IRQs. The driver operates on a single I/O memory range and the 32 GPIOs are hooked up a single interrupt. In the case of R-Car H1 either external IRQ pins or GPIOs with interrupts can be used for on-board interupts. For external IRQs 4 pins are supported, and in the case of GPIO there are 202 GPIOS as 202 interrupts hooked up via 6 driver instances and to the GIC and the Cortex-A9 Quad. At this point this driver is interfacing as a regular platform device driver. In the future DT support will be submitted as an incremental feature patch. Signed-off-by: Magnus Damm Reviewed-by: Linus Walleij Signed-off-by: Simon Horman --- drivers/gpio/Kconfig | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/gpio/Kconfig') diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 93aaadf99f28..d766e3cbef18 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -204,6 +204,12 @@ config GPIO_PXA help Say yes here to support the PXA GPIO device +config GPIO_RCAR + tristate "Renesas R-Car GPIO" + depends on ARM + help + Say yes here to support GPIO on Renesas R-Car SoCs. + config GPIO_SPEAR_SPICS bool "ST SPEAr13xx SPI Chip Select as GPIO support" depends on PLAT_SPEAR -- cgit v1.2.2