From f4b89764c470230bbf9d18c0a3411887c48bb5a2 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 27 Jun 2011 11:33:46 +0200 Subject: dmaengine/ste_dma40: use AMBA PrimeCell helper macros The DMA40 is not a PrimeCell from ARM, but it still use the same ID registers. So let's utilize the existing macros in the PrimeCell header to identify manufacturer and revision of the IP block instead of reinventing the wheel. Cc: Robert Marklund Cc: Per Forlin Cc: Rabin Vincent Signed-off-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/ste_dma40.c | 72 +++++++++++++++++----------------------------- drivers/dma/ste_dma40_ll.h | 3 -- 2 files changed, 26 insertions(+), 49 deletions(-) (limited to 'drivers/dma') diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index 35b078d688d5..2797f64e5e48 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -13,6 +13,7 @@ #include #include #include +#include #include @@ -44,9 +45,6 @@ #define D40_ALLOC_PHY (1 << 30) #define D40_ALLOC_LOG_FREE 0 -/* Hardware designer of the block */ -#define D40_HW_DESIGNER 0x8 - /** * enum 40_command - The different commands and/or statuses. * @@ -2525,25 +2523,6 @@ static int __init d40_phy_res_init(struct d40_base *base) static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev) { - static const struct d40_reg_val dma_id_regs[] = { - /* Peripheral Id */ - { .reg = D40_DREG_PERIPHID0, .val = 0x0040}, - { .reg = D40_DREG_PERIPHID1, .val = 0x0000}, - /* - * D40_DREG_PERIPHID2 Depends on HW revision: - * DB8500ed has 0x0008, - * ? has 0x0018, - * DB8500v1 has 0x0028 - * DB8500v2 has 0x0038 - */ - { .reg = D40_DREG_PERIPHID3, .val = 0x0000}, - - /* PCell Id */ - { .reg = D40_DREG_CELLID0, .val = 0x000d}, - { .reg = D40_DREG_CELLID1, .val = 0x00f0}, - { .reg = D40_DREG_CELLID2, .val = 0x0005}, - { .reg = D40_DREG_CELLID3, .val = 0x00b1} - }; struct stedma40_platform_data *plat_data; struct clk *clk = NULL; void __iomem *virtbase = NULL; @@ -2552,8 +2531,9 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev) int num_log_chans = 0; int num_phy_chans; int i; - u32 val; - u32 rev; + u32 pid; + u32 cid; + u8 rev; clk = clk_get(&pdev->dev, NULL); @@ -2577,32 +2557,32 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev) if (!virtbase) goto failure; - /* HW version check */ - for (i = 0; i < ARRAY_SIZE(dma_id_regs); i++) { - if (dma_id_regs[i].val != - readl(virtbase + dma_id_regs[i].reg)) { - d40_err(&pdev->dev, - "Unknown hardware! Expected 0x%x at 0x%x but got 0x%x\n", - dma_id_regs[i].val, - dma_id_regs[i].reg, - readl(virtbase + dma_id_regs[i].reg)); - goto failure; - } - } - - /* Get silicon revision and designer */ - val = readl(virtbase + D40_DREG_PERIPHID2); + /* This is just a regular AMBA PrimeCell ID actually */ + for (pid = 0, i = 0; i < 4; i++) + pid |= (readl(virtbase + resource_size(res) - 0x20 + 4 * i) + & 255) << (i * 8); + for (cid = 0, i = 0; i < 4; i++) + cid |= (readl(virtbase + resource_size(res) - 0x10 + 4 * i) + & 255) << (i * 8); - if ((val & D40_DREG_PERIPHID2_DESIGNER_MASK) != - D40_HW_DESIGNER) { + if (cid != AMBA_CID) { + d40_err(&pdev->dev, "Unknown hardware! No PrimeCell ID\n"); + goto failure; + } + if (AMBA_MANF_BITS(pid) != AMBA_VENDOR_ST) { d40_err(&pdev->dev, "Unknown designer! Got %x wanted %x\n", - val & D40_DREG_PERIPHID2_DESIGNER_MASK, - D40_HW_DESIGNER); + AMBA_MANF_BITS(pid), + AMBA_VENDOR_ST); goto failure; } - - rev = (val & D40_DREG_PERIPHID2_REV_MASK) >> - D40_DREG_PERIPHID2_REV_POS; + /* + * HW revision: + * DB8500ed has revision 0 + * ? has revision 1 + * DB8500v1 has revision 2 + * DB8500v2 has revision 3 + */ + rev = AMBA_REV_BITS(pid); /* The number of physical channels on this HW */ num_phy_chans = 4 * (readl(virtbase + D40_DREG_ICFG) & 0x7) + 4; diff --git a/drivers/dma/ste_dma40_ll.h b/drivers/dma/ste_dma40_ll.h index 195ee65ee7f3..b44c455158de 100644 --- a/drivers/dma/ste_dma40_ll.h +++ b/drivers/dma/ste_dma40_ll.h @@ -184,9 +184,6 @@ #define D40_DREG_PERIPHID0 0xFE0 #define D40_DREG_PERIPHID1 0xFE4 #define D40_DREG_PERIPHID2 0xFE8 -#define D40_DREG_PERIPHID2_REV_POS 4 -#define D40_DREG_PERIPHID2_REV_MASK (0xf << D40_DREG_PERIPHID2_REV_POS) -#define D40_DREG_PERIPHID2_DESIGNER_MASK 0xf #define D40_DREG_PERIPHID3 0xFEC #define D40_DREG_CELLID0 0xFF0 #define D40_DREG_CELLID1 0xFF4 -- cgit v1.2.2