From c885bee4f10323a1ff3f19e1aa2aa6f4e7f89dd8 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:38:52 +0000 Subject: ARM: PL08x: combine functions to start DMA into one function There is no need for pl08x_config_phychan_for_txd(), pl08x_set_cregs() and pl08x_enable_phy_chan() to be separate - they are always called in sequence. Combine them into one function. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 98 +++++++++++++++++++----------------------------- 1 file changed, 38 insertions(+), 60 deletions(-) (limited to 'drivers/dma') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 202c9e2d2e9e..c025a4b4bae4 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -185,37 +185,17 @@ static int pl08x_phy_channel_busy(struct pl08x_phy_chan *ch) /* * Set the initial DMA register values i.e. those for the first LLI * The next LLI pointer and the configuration interrupt bit have - * been set when the LLIs were constructed + * been set when the LLIs were constructed. Poke them into the hardware + * and start the transfer. */ -static void pl08x_set_cregs(struct pl08x_driver_data *pl08x, - struct pl08x_phy_chan *ch) +static void pl08x_start_txd(struct pl08x_dma_chan *plchan, + struct pl08x_txd *txd) { - /* Wait for channel inactive */ - while (pl08x_phy_channel_busy(ch)) - cpu_relax(); - - dev_vdbg(&pl08x->adev->dev, - "WRITE channel %d: csrc=0x%08x, cdst=0x%08x, " - "cctl=0x%08x, clli=0x%08x, ccfg=0x%08x\n", - ch->id, - ch->csrc, - ch->cdst, - ch->cctl, - ch->clli, - ch->ccfg); - - writel(ch->csrc, ch->base + PL080_CH_SRC_ADDR); - writel(ch->cdst, ch->base + PL080_CH_DST_ADDR); - writel(ch->clli, ch->base + PL080_CH_LLI); - writel(ch->cctl, ch->base + PL080_CH_CONTROL); - writel(ch->ccfg, ch->base + PL080_CH_CONFIG); -} - -static inline void pl08x_config_phychan_for_txd(struct pl08x_dma_chan *plchan) -{ - struct pl08x_channel_data *cd = plchan->cd; + struct pl08x_driver_data *pl08x = plchan->host; struct pl08x_phy_chan *phychan = plchan->phychan; - struct pl08x_txd *txd = plchan->at; + u32 val; + + plchan->at = txd; /* Copy the basic control register calculated at transfer config */ phychan->csrc = txd->csrc; @@ -224,7 +204,7 @@ static inline void pl08x_config_phychan_for_txd(struct pl08x_dma_chan *plchan) phychan->cctl = txd->cctl; /* Assign the signal to the proper control registers */ - phychan->ccfg = cd->ccfg; + phychan->ccfg = plchan->cd->ccfg; phychan->ccfg &= ~PL080_CONFIG_SRC_SEL_MASK; phychan->ccfg &= ~PL080_CONFIG_DST_SEL_MASK; /* If it wasn't set from AMBA, ignore it */ @@ -240,32 +220,38 @@ static inline void pl08x_config_phychan_for_txd(struct pl08x_dma_chan *plchan) phychan->ccfg |= PL080_CONFIG_ERR_IRQ_MASK; /* Always enable terminal interrupts */ phychan->ccfg |= PL080_CONFIG_TC_IRQ_MASK; -} -/* - * Enable the DMA channel - * Assumes all other configuration bits have been set - * as desired before this code is called - */ -static void pl08x_enable_phy_chan(struct pl08x_driver_data *pl08x, - struct pl08x_phy_chan *ch) -{ - u32 val; + /* Wait for channel inactive */ + while (pl08x_phy_channel_busy(phychan)) + cpu_relax(); - /* - * Do not access config register until channel shows as disabled - */ - while (readl(pl08x->base + PL080_EN_CHAN) & (1 << ch->id)) + dev_vdbg(&pl08x->adev->dev, + "WRITE channel %d: csrc=0x%08x, cdst=0x%08x, " + "cctl=0x%08x, clli=0x%08x, ccfg=0x%08x\n", + phychan->id, + phychan->csrc, + phychan->cdst, + phychan->cctl, + phychan->clli, + phychan->ccfg); + + writel(phychan->csrc, phychan->base + PL080_CH_SRC_ADDR); + writel(phychan->cdst, phychan->base + PL080_CH_DST_ADDR); + writel(phychan->clli, phychan->base + PL080_CH_LLI); + writel(phychan->cctl, phychan->base + PL080_CH_CONTROL); + writel(phychan->ccfg, phychan->base + PL080_CH_CONFIG); + + /* Enable the DMA channel */ + /* Do not access config register until channel shows as disabled */ + while (readl(pl08x->base + PL080_EN_CHAN) & (1 << phychan->id)) cpu_relax(); - /* - * Do not access config register until channel shows as inactive - */ - val = readl(ch->base + PL080_CH_CONFIG); + /* Do not access config register until channel shows as inactive */ + val = readl(phychan->base + PL080_CH_CONFIG); while ((val & PL080_CONFIG_ACTIVE) || (val & PL080_CONFIG_ENABLE)) - val = readl(ch->base + PL080_CH_CONFIG); + val = readl(phychan->base + PL080_CH_CONFIG); - writel(val | PL080_CONFIG_ENABLE, ch->base + PL080_CH_CONFIG); + writel(val | PL080_CONFIG_ENABLE, phychan->base + PL080_CH_CONFIG); } /* @@ -1278,7 +1264,6 @@ static void dma_set_runtime_config(struct dma_chan *chan, static void pl08x_issue_pending(struct dma_chan *chan) { struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); - struct pl08x_driver_data *pl08x = plchan->host; unsigned long flags; spin_lock_irqsave(&plchan->lock, flags); @@ -1296,13 +1281,9 @@ static void pl08x_issue_pending(struct dma_chan *chan) struct pl08x_txd, node); list_del(&next->node); - plchan->at = next; plchan->state = PL08X_CHAN_RUNNING; - /* Configure the physical channel for the active txd */ - pl08x_config_phychan_for_txd(plchan); - pl08x_set_cregs(pl08x, plchan->phychan); - pl08x_enable_phy_chan(pl08x, plchan->phychan); + pl08x_start_txd(plchan, next); } spin_unlock_irqrestore(&plchan->lock, flags); @@ -1630,11 +1611,8 @@ static void pl08x_tasklet(unsigned long data) struct pl08x_txd, node); list_del(&next->node); - plchan->at = next; - /* Configure the physical channel for the next txd */ - pl08x_config_phychan_for_txd(plchan); - pl08x_set_cregs(pl08x, plchan->phychan); - pl08x_enable_phy_chan(pl08x, plchan->phychan); + + pl08x_start_txd(plchan, next); } else { struct pl08x_dma_chan *waiting = NULL; -- cgit v1.2.2