From d324d4627d7442d9a74b0b93fc40f71ce194632a Mon Sep 17 00:00:00 2001 From: Mikael Pettersson Date: Wed, 6 Dec 2006 09:55:43 +0100 Subject: [PATCH] sata_promise: cleanups, take 2 This patch performs two simple cleanups of sata_promise. * Remove board_20771 and map device id 0x3577 to board_2057x. After the recent corrections for SATAII chips, board_20771 and board_2057x were equivalent in the driver. * Remove hp->hotplug_offset and use hp->flags & PDC_FLAG_GEN_II to compute hotplug_offset in pdc_host_init(). hp->hotplug_offset was used to distinguish 1st and 2nd generation chips in one particular case, but now we have that information in a more general form in hp->flags, so hp->hotplug_offset is redundant. Changes since previous submission: rebased on libata-dev #upstream, cleaned up hotplug_offset computation based on Tejun's comments, expanded hotplug_offset removal rationale. This patch does not depend on the pending new EH conversion patch. Signed-off-by: Mikael Pettersson Signed-off-by: Jeff Garzik --- drivers/ata/sata_promise.c | 40 +++++++++------------------------------- 1 file changed, 9 insertions(+), 31 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c index a2778cf016bc..6f7bc5b0ef4a 100644 --- a/drivers/ata/sata_promise.c +++ b/drivers/ata/sata_promise.c @@ -66,9 +66,8 @@ enum { board_2037x = 0, /* FastTrak S150 TX2plus */ board_20319 = 1, /* FastTrak S150 TX4 */ board_20619 = 2, /* FastTrak TX4000 */ - board_20771 = 3, /* FastTrak TX2300 */ - board_2057x = 4, /* SATAII150 Tx2plus */ - board_40518 = 5, /* SATAII150 Tx4 */ + board_2057x = 3, /* SATAII150 Tx2plus */ + board_40518 = 4, /* SATAII150 Tx4 */ PDC_HAS_PATA = (1 << 1), /* PDC20375/20575 has PATA */ @@ -90,7 +89,6 @@ struct pdc_port_priv { struct pdc_host_priv { unsigned long flags; - int hotplug_offset; }; static u32 pdc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg); @@ -205,16 +203,6 @@ static const struct ata_port_info pdc_port_info[] = { .port_ops = &pdc_pata_ops, }, - /* board_20771 */ - { - .sht = &pdc_ata_sht, - .flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x7f, /* udma0-6 ; FIXME */ - .port_ops = &pdc_sata_ops, - }, - /* board_2057x */ { .sht = &pdc_ata_sht, @@ -244,6 +232,7 @@ static const struct pci_device_id pdc_ata_pci_tbl[] = { { PCI_VDEVICE(PROMISE, 0x3570), board_2057x }, { PCI_VDEVICE(PROMISE, 0x3571), board_2057x }, { PCI_VDEVICE(PROMISE, 0x3574), board_2057x }, + { PCI_VDEVICE(PROMISE, 0x3577), board_2057x }, { PCI_VDEVICE(PROMISE, 0x3d73), board_2057x }, { PCI_VDEVICE(PROMISE, 0x3d75), board_2057x }, @@ -256,15 +245,6 @@ static const struct pci_device_id pdc_ata_pci_tbl[] = { { PCI_VDEVICE(PROMISE, 0x6629), board_20619 }, -/* TODO: remove all associated board_20771 code, as it completely - * duplicates board_2037x code, unless reason for separation can be - * divined. - */ -#if 0 - { PCI_VDEVICE(PROMISE, 0x3570), board_20771 }, -#endif - { PCI_VDEVICE(PROMISE, 0x3577), board_20771 }, - { } /* terminate list */ }; @@ -645,9 +625,14 @@ static void pdc_host_init(unsigned int chip_id, struct ata_probe_ent *pe) { void __iomem *mmio = pe->mmio_base; struct pdc_host_priv *hp = pe->private_data; - int hotplug_offset = hp->hotplug_offset; + int hotplug_offset; u32 tmp; + if (hp->flags & PDC_FLAG_GEN_II) + hotplug_offset = PDC2_SATA_PLUG_CSR; + else + hotplug_offset = PDC_SATA_PLUG_CSR; + /* * Except for the hotplug stuff, this is voodoo from the * Promise driver. Label this entire section @@ -742,8 +727,6 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e goto err_out_free_ent; } - /* Set default hotplug offset */ - hp->hotplug_offset = PDC_SATA_PLUG_CSR; probe_ent->private_data = hp; probe_ent->sht = pdc_port_info[board_idx].sht; @@ -767,8 +750,6 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e switch (board_idx) { case board_40518: hp->flags |= PDC_FLAG_GEN_II; - /* Override hotplug offset for SATAII150 */ - hp->hotplug_offset = PDC2_SATA_PLUG_CSR; /* Fall through */ case board_20319: probe_ent->n_ports = 4; @@ -780,10 +761,7 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e probe_ent->port[3].scr_addr = base + 0x700; break; case board_2057x: - case board_20771: hp->flags |= PDC_FLAG_GEN_II; - /* Override hotplug offset for SATAII150 */ - hp->hotplug_offset = PDC2_SATA_PLUG_CSR; /* Fall through */ case board_2037x: probe_ent->n_ports = 2; -- cgit v1.2.2