From cf48062658e7ab3bc55e10c65676c3c73c16f8bf Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Thu, 24 Jan 2008 00:05:14 +0900
Subject: libata: prefer hardreset

When both soft and hard resets are available, libata preferred
softreset till now.  The logic behind it was to be softer to devices;
however, this doesn't really help much.  Rationales for the change:

* BIOS may freeze lock certain things during boot and softreset can't
  unlock those.  This by itself is okay but during operation PHY event
  or other error conditions can trigger hardreset and the device may
  end up with different configuration.

  For example, after a hardreset, previously unlockable HPA can be
  unlocked resulting in different device size and thus revalidation
  failure.  Similar condition can occur during or after resume.

* Certain ATAPI devices require hardreset to recover after certain
  error conditions.  On PATA, this is done by issuing the DEVICE RESET
  command.  On SATA, COMRESET has equivalent effect.  The problem is
  that DEVICE RESET needs its own execution protocol.

  For SFF controllers with bare TF access, it can be easily
  implemented but more advanced controllers (e.g. ahci and sata_sil24)
  require specialized implementations.  Simply using hardreset solves
  the problem nicely.

* COMRESET initialization sequence is the norm in SATA land and many
  SATA devices don't work properly if only SRST is used.  For example,
  some PMPs behave this way and libata works around by always issuing
  hardreset if the host supports PMP.

  Like the above example, libata has developed a number of mechanisms
  aiming to promote softreset to hardreset if softreset is not going
  to work.  This approach is time consuming and error prone.

  Also, note that, dependingon how you read the specs, it could be
  argued that PMP fan-out ports require COMRESET to start operation.
  In fact, all the PMPs on the market except one don't work properly
  if COMRESET is not issued to fan-out ports after PMP reset.

* COMRESET is an integral part of SATA connection and any working
  device should be able to handle COMRESET properly.  After all, it's
  the way to signal hardreset during reboot.  This is the most used
  and recommended (at least by the ahci spec) method of resetting
  devices.

So, this patch makes libata prefer hardreset over softreset by making
the following changes.

* Rename ATA_EH_RESET_MASK to ATA_EH_RESET and use it whereever
  ATA_EH_{SOFT|HARD}RESET used to be used.  ATA_EH_{SOFT|HARD}RESET is
  now only used to tell prereset whether soft or hard reset will be
  issued.

* Strip out now unneeded promote-to-hardreset logics from
  ata_eh_reset(), ata_std_prereset(), sata_pmp_std_prereset() and
  other places.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/ahci.c        | 10 ++---
 drivers/ata/libata-core.c | 19 ++-------
 drivers/ata/libata-eh.c   | 99 +++++++++++++++++------------------------------
 drivers/ata/libata-pmp.c  | 28 ++++----------
 drivers/ata/libata-scsi.c |  4 +-
 drivers/ata/sata_fsl.c    |  2 +-
 drivers/ata/sata_mv.c     | 31 ++++-----------
 drivers/ata/sata_nv.c     | 12 +++---
 drivers/ata/sata_sil24.c  | 54 +++++++++++++-------------
 drivers/ata/sata_via.c    |  2 +-
 10 files changed, 97 insertions(+), 164 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index b1eb4e24c86a..f6bbd52b1547 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1663,7 +1663,7 @@ static void ahci_error_intr(struct ata_port *ap, u32 irq_stat)
 		u32 *unk = (u32 *)(pp->rx_fis + RX_FIS_UNK);
 
 		active_ehi->err_mask |= AC_ERR_HSM;
-		active_ehi->action |= ATA_EH_SOFTRESET;
+		active_ehi->action |= ATA_EH_RESET;
 		ata_ehi_push_desc(active_ehi,
 				  "unknown FIS %08x %08x %08x %08x" ,
 				  unk[0], unk[1], unk[2], unk[3]);
@@ -1671,19 +1671,19 @@ static void ahci_error_intr(struct ata_port *ap, u32 irq_stat)
 
 	if (ap->nr_pmp_links && (irq_stat & PORT_IRQ_BAD_PMP)) {
 		active_ehi->err_mask |= AC_ERR_HSM;
-		active_ehi->action |= ATA_EH_SOFTRESET;
+		active_ehi->action |= ATA_EH_RESET;
 		ata_ehi_push_desc(active_ehi, "incorrect PMP");
 	}
 
 	if (irq_stat & (PORT_IRQ_HBUS_ERR | PORT_IRQ_HBUS_DATA_ERR)) {
 		host_ehi->err_mask |= AC_ERR_HOST_BUS;
-		host_ehi->action |= ATA_EH_SOFTRESET;
+		host_ehi->action |= ATA_EH_RESET;
 		ata_ehi_push_desc(host_ehi, "host bus error");
 	}
 
 	if (irq_stat & PORT_IRQ_IF_ERR) {
 		host_ehi->err_mask |= AC_ERR_ATA_BUS;
-		host_ehi->action |= ATA_EH_SOFTRESET;
+		host_ehi->action |= ATA_EH_RESET;
 		ata_ehi_push_desc(host_ehi, "interface fatal error");
 	}
 
@@ -1771,7 +1771,7 @@ static void ahci_port_intr(struct ata_port *ap)
 	/* while resetting, invalid completions are expected */
 	if (unlikely(rc < 0 && !resetting)) {
 		ehi->err_mask |= AC_ERR_HSM;
-		ehi->action |= ATA_EH_SOFTRESET;
+		ehi->action |= ATA_EH_RESET;
 		ata_port_freeze(ap);
 	}
 }
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index be95fdb69726..02e7ba43a3b3 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3949,17 +3949,6 @@ int ata_std_prereset(struct ata_link *link, unsigned long deadline)
 	const unsigned long *timing = sata_ehc_deb_timing(ehc);
 	int rc;
 
-	/* handle link resume */
-	if ((ehc->i.flags & ATA_EHI_RESUME_LINK) &&
-	    (link->flags & ATA_LFLAG_HRST_TO_RESUME))
-		ehc->i.action |= ATA_EH_HARDRESET;
-
-	/* Some PMPs don't work with only SRST, force hardreset if PMP
-	 * is supported.
-	 */
-	if (ap->flags & ATA_FLAG_PMP)
-		ehc->i.action |= ATA_EH_HARDRESET;
-
 	/* if we're about to do hardreset, nothing more to do */
 	if (ehc->i.action & ATA_EH_HARDRESET)
 		return 0;
@@ -6055,9 +6044,9 @@ void ata_qc_issue(struct ata_queued_cmd *qc)
 		if (ata_sg_setup(qc))
 			goto sg_err;
 
-	/* if device is sleeping, schedule softreset and abort the link */
+	/* if device is sleeping, schedule reset and abort the link */
 	if (unlikely(qc->dev->flags & ATA_DFLAG_SLEEPING)) {
-		link->eh_info.action |= ATA_EH_SOFTRESET;
+		link->eh_info.action |= ATA_EH_RESET;
 		ata_ehi_push_desc(&link->eh_info, "waking up from sleep");
 		ata_link_abort(link);
 		return;
@@ -6634,7 +6623,7 @@ int ata_host_suspend(struct ata_host *host, pm_message_t mesg)
  */
 void ata_host_resume(struct ata_host *host)
 {
-	ata_host_request_pm(host, PMSG_ON, ATA_EH_SOFTRESET,
+	ata_host_request_pm(host, PMSG_ON, ATA_EH_RESET,
 			    ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 0);
 	host->dev->power.power_state = PMSG_ON;
 
@@ -7171,7 +7160,7 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht)
 
 			ehi->probe_mask =
 				(1 << ata_link_max_devices(&ap->link)) - 1;
-			ehi->action |= ATA_EH_SOFTRESET;
+			ehi->action |= ATA_EH_RESET;
 			ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET;
 
 			ap->pflags &= ~ATA_PFLAG_INITIALIZING;
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index a5830329eda4..f7cae6400155 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1079,16 +1079,9 @@ void ata_eh_about_to_do(struct ata_link *link, struct ata_device *dev,
 
 	spin_lock_irqsave(ap->lock, flags);
 
-	/* Reset is represented by combination of actions and EHI
-	 * flags.  Suck in all related bits before clearing eh_info to
-	 * avoid losing requested action.
-	 */
-	if (action & ATA_EH_RESET_MASK) {
-		ehc->i.action |= ehi->action & ATA_EH_RESET_MASK;
+	/* suck in and clear reset modifier */
+	if (action & ATA_EH_RESET) {
 		ehc->i.flags |= ehi->flags & ATA_EHI_RESET_MODIFIER_MASK;
-
-		/* make sure all reset actions are cleared & clear EHI flags */
-		action |= ATA_EH_RESET_MASK;
 		ehi->flags &= ~ATA_EHI_RESET_MODIFIER_MASK;
 	}
 
@@ -1117,11 +1110,9 @@ void ata_eh_done(struct ata_link *link, struct ata_device *dev,
 {
 	struct ata_eh_context *ehc = &link->eh_context;
 
-	/* if reset is complete, clear all reset actions & reset modifier */
-	if (action & ATA_EH_RESET_MASK) {
-		action |= ATA_EH_RESET_MASK;
+	/* if reset is complete, clear reset modifier */
+	if (action & ATA_EH_RESET)
 		ehc->i.flags &= ~ATA_EHI_RESET_MODIFIER_MASK;
-	}
 
 	ata_eh_clear_action(link, dev, &ehc->i, action);
 }
@@ -1329,20 +1320,20 @@ static void ata_eh_analyze_serror(struct ata_link *link)
 
 	if (serror & SERR_PERSISTENT) {
 		err_mask |= AC_ERR_ATA_BUS;
-		action |= ATA_EH_HARDRESET;
+		action |= ATA_EH_RESET;
 	}
 	if (serror &
 	    (SERR_DATA_RECOVERED | SERR_COMM_RECOVERED | SERR_DATA)) {
 		err_mask |= AC_ERR_ATA_BUS;
-		action |= ATA_EH_SOFTRESET;
+		action |= ATA_EH_RESET;
 	}
 	if (serror & SERR_PROTOCOL) {
 		err_mask |= AC_ERR_HSM;
-		action |= ATA_EH_SOFTRESET;
+		action |= ATA_EH_RESET;
 	}
 	if (serror & SERR_INTERNAL) {
 		err_mask |= AC_ERR_SYSTEM;
-		action |= ATA_EH_HARDRESET;
+		action |= ATA_EH_RESET;
 	}
 
 	/* Determine whether a hotplug event has occurred.  Both
@@ -1448,7 +1439,7 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc,
 
 	if ((stat & (ATA_BUSY | ATA_DRQ | ATA_DRDY)) != ATA_DRDY) {
 		qc->err_mask |= AC_ERR_HSM;
-		return ATA_EH_SOFTRESET;
+		return ATA_EH_RESET;
 	}
 
 	if (stat & (ATA_ERR | ATA_DF))
@@ -1484,7 +1475,7 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc,
 	}
 
 	if (qc->err_mask & (AC_ERR_HSM | AC_ERR_TIMEOUT | AC_ERR_ATA_BUS))
-		action |= ATA_EH_SOFTRESET;
+		action |= ATA_EH_RESET;
 
 	return action;
 }
@@ -1685,7 +1676,7 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev,
 	if (verdict & ATA_EH_SPDN_SPEED_DOWN) {
 		/* speed down SATA link speed if possible */
 		if (sata_down_spd_limit(link) == 0) {
-			action |= ATA_EH_HARDRESET;
+			action |= ATA_EH_RESET;
 			goto done;
 		}
 
@@ -1705,7 +1696,7 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev,
 			dev->spdn_cnt++;
 
 			if (ata_down_xfermask_limit(dev, sel) == 0) {
-				action |= ATA_EH_SOFTRESET;
+				action |= ATA_EH_RESET;
 				goto done;
 			}
 		}
@@ -1719,7 +1710,7 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev,
 	    (dev->xfer_shift != ATA_SHIFT_PIO)) {
 		if (ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO) == 0) {
 			dev->spdn_cnt = 0;
-			action |= ATA_EH_SOFTRESET;
+			action |= ATA_EH_RESET;
 			goto done;
 		}
 	}
@@ -1764,9 +1755,9 @@ static void ata_eh_link_autopsy(struct ata_link *link)
 		ehc->i.serror |= serror;
 		ata_eh_analyze_serror(link);
 	} else if (rc != -EOPNOTSUPP) {
-		/* SError read failed, force hardreset and probing */
+		/* SError read failed, force reset and probing */
 		ata_ehi_schedule_probe(&ehc->i);
-		ehc->i.action |= ATA_EH_HARDRESET;
+		ehc->i.action |= ATA_EH_RESET;
 		ehc->i.err_mask |= AC_ERR_OTHER;
 	}
 
@@ -1814,7 +1805,7 @@ static void ata_eh_link_autopsy(struct ata_link *link)
 	/* enforce default EH actions */
 	if (ap->pflags & ATA_PFLAG_FROZEN ||
 	    all_err_mask & (AC_ERR_HSM | AC_ERR_TIMEOUT))
-		ehc->i.action |= ATA_EH_SOFTRESET;
+		ehc->i.action |= ATA_EH_RESET;
 	else if (((eflags & ATA_EFLAG_IS_IO) && all_err_mask) ||
 		 (!(eflags & ATA_EFLAG_IS_IO) && (all_err_mask & ~AC_ERR_DEV)))
 		ehc->i.action |= ATA_EH_REVALIDATE;
@@ -2118,7 +2109,6 @@ int ata_eh_reset(struct ata_link *link, int classify,
 	int try = 0;
 	struct ata_device *dev;
 	unsigned long deadline, now;
-	unsigned int tmp_action;
 	ata_reset_fn_t reset;
 	unsigned long flags;
 	u32 sstatus;
@@ -2129,7 +2119,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
 	ap->pflags |= ATA_PFLAG_RESETTING;
 	spin_unlock_irqrestore(ap->lock, flags);
 
-	ata_eh_about_to_do(link, NULL, ehc->i.action & ATA_EH_RESET_MASK);
+	ata_eh_about_to_do(link, NULL, ATA_EH_RESET);
 
 	ata_link_for_each_dev(dev, link) {
 		/* If we issue an SRST then an ATA drive (not ATAPI)
@@ -2159,17 +2149,15 @@ int ata_eh_reset(struct ata_link *link, int classify,
 		goto done;
 	}
 
-	/* Determine which reset to use and record in ehc->i.action.
-	 * prereset() may examine and modify it.
-	 */
-	if (softreset && (!hardreset || (!(lflags & ATA_LFLAG_NO_SRST) &&
-					 !sata_set_spd_needed(link) &&
-					 !(ehc->i.action & ATA_EH_HARDRESET))))
-		tmp_action = ATA_EH_SOFTRESET;
-	else
-		tmp_action = ATA_EH_HARDRESET;
-
-	ehc->i.action = (ehc->i.action & ~ATA_EH_RESET_MASK) | tmp_action;
+	/* prefer hardreset */
+	ehc->i.action &= ~ATA_EH_RESET;
+	if (hardreset) {
+		reset = hardreset;
+		ehc->i.action = ATA_EH_HARDRESET;
+	} else {
+		reset = softreset;
+		ehc->i.action = ATA_EH_SOFTRESET;
+	}
 
 	if (prereset) {
 		rc = prereset(link, jiffies + ATA_EH_PRERESET_TIMEOUT);
@@ -2177,7 +2165,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
 			if (rc == -ENOENT) {
 				ata_link_printk(link, KERN_DEBUG,
 						"port disabled. ignoring.\n");
-				ehc->i.action &= ~ATA_EH_RESET_MASK;
+				ehc->i.action &= ~ATA_EH_RESET;
 
 				ata_link_for_each_dev(dev, link)
 					classes[dev->devno] = ATA_DEV_NONE;
@@ -2190,12 +2178,8 @@ int ata_eh_reset(struct ata_link *link, int classify,
 		}
 	}
 
-	/* prereset() might have modified ehc->i.action */
-	if (ehc->i.action & ATA_EH_HARDRESET)
-		reset = hardreset;
-	else if (ehc->i.action & ATA_EH_SOFTRESET)
-		reset = softreset;
-	else {
+	/* prereset() might have cleared ATA_EH_RESET */
+	if (!(ehc->i.action & ATA_EH_RESET)) {
 		/* prereset told us not to reset, bang classes and return */
 		ata_link_for_each_dev(dev, link)
 			classes[dev->devno] = ATA_DEV_NONE;
@@ -2203,14 +2187,6 @@ int ata_eh_reset(struct ata_link *link, int classify,
 		goto out;
 	}
 
-	/* did prereset() screw up?  if so, fix up to avoid oopsing */
-	if (!reset) {
-		if (softreset)
-			reset = softreset;
-		else
-			reset = hardreset;
-	}
-
  retry:
 	deadline = jiffies + ata_eh_reset_timeouts[try++];
 
@@ -2240,7 +2216,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
 			goto fail;
 		}
 
-		ata_eh_about_to_do(link, NULL, ATA_EH_RESET_MASK);
+		ata_eh_about_to_do(link, NULL, ATA_EH_RESET);
 		rc = ata_do_reset(link, reset, classes, deadline);
 	}
 
@@ -2290,7 +2266,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
 		postreset(link, classes);
 
 	/* reset successful, schedule revalidation */
-	ata_eh_done(link, NULL, ehc->i.action & ATA_EH_RESET_MASK);
+	ata_eh_done(link, NULL, ATA_EH_RESET);
 	ehc->i.action |= ATA_EH_REVALIDATE;
 
 	rc = 0;
@@ -2548,7 +2524,7 @@ static int ata_eh_schedule_probe(struct ata_device *dev)
 	ata_eh_detach_dev(dev);
 	ata_dev_init(dev);
 	ehc->did_probe_mask |= (1 << dev->devno);
-	ehc->i.action |= ATA_EH_SOFTRESET;
+	ehc->i.action |= ATA_EH_RESET;
 	ehc->saved_xfer_mode[dev->devno] = 0;
 	ehc->saved_ncq_enabled &= ~(1 << dev->devno);
 
@@ -2592,12 +2568,7 @@ static int ata_eh_handle_dev_fail(struct ata_device *dev, int err)
 
 		return 1;
 	} else {
-		/* soft didn't work?  be haaaaard */
-		if (ehc->i.flags & ATA_EHI_DID_RESET)
-			ehc->i.action |= ATA_EH_HARDRESET;
-		else
-			ehc->i.action |= ATA_EH_SOFTRESET;
-
+		ehc->i.action |= ATA_EH_RESET;
 		return 0;
 	}
 }
@@ -2690,7 +2661,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
 			ehc->i.action = 0;
 
 		/* do we need to reset? */
-		if (ehc->i.action & ATA_EH_RESET_MASK)
+		if (ehc->i.action & ATA_EH_RESET)
 			reset = 1;
 
 		ata_link_for_each_dev(dev, link)
@@ -2708,7 +2679,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
 		ata_port_for_each_link(link, ap) {
 			struct ata_eh_context *ehc = &link->eh_context;
 
-			if (!(ehc->i.action & ATA_EH_RESET_MASK))
+			if (!(ehc->i.action & ATA_EH_RESET))
 				continue;
 
 			rc = ata_eh_reset(link, ata_link_nr_vacant(link),
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index d91f5090ba9d..8439fc8efdd6 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -194,15 +194,6 @@ int sata_pmp_std_prereset(struct ata_link *link, unsigned long deadline)
 	const unsigned long *timing = sata_ehc_deb_timing(ehc);
 	int rc;
 
-	/* force HRST? */
-	if (link->flags & ATA_LFLAG_NO_SRST)
-		ehc->i.action |= ATA_EH_HARDRESET;
-
-	/* handle link resume */
-	if ((ehc->i.flags & ATA_EHI_RESUME_LINK) &&
-	    (link->flags & ATA_LFLAG_HRST_TO_RESUME))
-		ehc->i.action |= ATA_EH_HARDRESET;
-
 	/* if we're about to do hardreset, nothing more to do */
 	if (ehc->i.action & ATA_EH_HARDRESET)
 		return 0;
@@ -445,7 +436,7 @@ static int sata_pmp_init_links(struct ata_port *ap, int nr_ports)
 
 		link->flags = 0;
 		ehc->i.probe_mask |= 1;
-		ehc->i.action |= ATA_EH_SOFTRESET;
+		ehc->i.action |= ATA_EH_RESET;
 		ehc->i.flags |= ATA_EHI_RESUME_LINK;
 	}
 
@@ -840,13 +831,12 @@ static int sata_pmp_eh_recover_pmp(struct ata_port *ap,
  retry:
 	ehc->classes[0] = ATA_DEV_UNKNOWN;
 
-	if (ehc->i.action & ATA_EH_RESET_MASK) {
+	if (ehc->i.action & ATA_EH_RESET) {
 		struct ata_link *tlink;
 
 		ata_eh_freeze_port(ap);
 
 		/* reset */
-		ehc->i.action = ATA_EH_HARDRESET;
 		rc = ata_eh_reset(link, 0, prereset, softreset, hardreset,
 				  postreset);
 		if (rc) {
@@ -890,11 +880,11 @@ static int sata_pmp_eh_recover_pmp(struct ata_port *ap,
 				reval_failed = 1;
 
 			ata_dev_printk(dev, KERN_WARNING,
-				       "retrying hardreset%s\n",
+				       "retrying reset%s\n",
 				       sleep ? " in 5 secs" : "");
 			if (sleep)
 				ssleep(5);
-			ehc->i.action |= ATA_EH_HARDRESET;
+			ehc->i.action |= ATA_EH_RESET;
 			goto retry;
 		} else {
 			ata_dev_printk(dev, KERN_ERR, "failed to recover PMP "
@@ -938,10 +928,8 @@ static int sata_pmp_eh_handle_disabled_links(struct ata_port *ap)
 		/* Some PMPs require hardreset sequence to get
 		 * SError.N working.
 		 */
-		if ((link->flags & ATA_LFLAG_HRST_TO_RESUME) &&
-		    (link->eh_context.i.flags & ATA_EHI_RESUME_LINK))
-			sata_link_hardreset(link, sata_deb_timing_normal,
-					    jiffies + ATA_TMOUT_INTERNAL_QUICK);
+		sata_link_hardreset(link, sata_deb_timing_normal,
+				    jiffies + ATA_TMOUT_INTERNAL_QUICK);
 
 		/* unconditionally clear SError.N */
 		rc = sata_scr_write(link, SCR_ERROR, SERR_PHYRDY_CHG);
@@ -1124,7 +1112,7 @@ static int sata_pmp_eh_recover(struct ata_port *ap,
 
  link_fail:
 	if (sata_pmp_handle_link_fail(link, link_tries)) {
-		pmp_ehc->i.action |= ATA_EH_HARDRESET;
+		pmp_ehc->i.action |= ATA_EH_RESET;
 		goto retry;
 	}
 
@@ -1142,7 +1130,7 @@ static int sata_pmp_eh_recover(struct ata_port *ap,
 	if (--pmp_tries) {
 		ata_port_printk(ap, KERN_WARNING,
 				"failed to recover PMP, retrying in 5 secs\n");
-		pmp_ehc->i.action |= ATA_EH_HARDRESET;
+		pmp_ehc->i.action |= ATA_EH_RESET;
 		ssleep(5);
 		goto retry;
 	}
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 15795394b0a8..1f036a7b14f3 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3508,7 +3508,7 @@ static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel,
 		ata_port_for_each_link(link, ap) {
 			struct ata_eh_info *ehi = &link->eh_info;
 			ehi->probe_mask |= (1 << ata_link_max_devices(link)) - 1;
-			ehi->action |= ATA_EH_SOFTRESET;
+			ehi->action |= ATA_EH_RESET;
 		}
 	} else {
 		struct ata_device *dev = ata_find_dev(ap, devno);
@@ -3516,7 +3516,7 @@ static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel,
 		if (dev) {
 			struct ata_eh_info *ehi = &dev->link->eh_info;
 			ehi->probe_mask |= 1 << dev->devno;
-			ehi->action |= ATA_EH_SOFTRESET;
+			ehi->action |= ATA_EH_RESET;
 			ehi->flags |= ATA_EHI_RESUME_LINK;
 		} else
 			rc = -EINVAL;
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 9d1e3cad4aa9..fbd423ad23bb 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -996,7 +996,7 @@ static void sata_fsl_error_intr(struct ata_port *ap)
 	/* handle fatal errors */
 	if (hstatus & FATAL_ERROR_DECODE) {
 		err_mask |= AC_ERR_ATA_BUS;
-		action |= ATA_EH_SOFTRESET;
+		action |= ATA_EH_RESET;
 		/* how will fatal error interrupts be completed ?? */
 		freeze = 1;
 	}
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 6ebebde8454a..a4944c8ad46d 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -1524,14 +1524,14 @@ static void mv_err_intr(struct ata_port *ap, struct ata_queued_cmd *qc)
 			EDMA_ERR_CRQB_PAR | EDMA_ERR_CRPB_PAR |
 			EDMA_ERR_INTRL_PAR)) {
 		err_mask |= AC_ERR_ATA_BUS;
-		action |= ATA_EH_HARDRESET;
+		action |= ATA_EH_RESET;
 		ata_ehi_push_desc(ehi, "parity error");
 	}
 	if (edma_err_cause & (EDMA_ERR_DEV_DCON | EDMA_ERR_DEV_CON)) {
 		ata_ehi_hotplugged(ehi);
 		ata_ehi_push_desc(ehi, edma_err_cause & EDMA_ERR_DEV_DCON ?
 			"dev disconnect" : "dev connect");
-		action |= ATA_EH_HARDRESET;
+		action |= ATA_EH_RESET;
 	}
 
 	if (IS_GEN_I(hpriv)) {
@@ -1555,7 +1555,7 @@ static void mv_err_intr(struct ata_port *ap, struct ata_queued_cmd *qc)
 			sata_scr_read(&ap->link, SCR_ERROR, &serr);
 			sata_scr_write_flush(&ap->link, SCR_ERROR, serr);
 			err_mask = AC_ERR_ATA_BUS;
-			action |= ATA_EH_HARDRESET;
+			action |= ATA_EH_RESET;
 		}
 	}
 
@@ -1564,7 +1564,7 @@ static void mv_err_intr(struct ata_port *ap, struct ata_queued_cmd *qc)
 
 	if (!err_mask) {
 		err_mask = AC_ERR_OTHER;
-		action |= ATA_EH_HARDRESET;
+		action |= ATA_EH_RESET;
 	}
 
 	ehi->serror |= serr;
@@ -1780,7 +1780,7 @@ static void mv_pci_error(struct ata_host *host, void __iomem *mmio)
 				ata_ehi_push_desc(ehi,
 					"PCI err cause 0x%08x", err_cause);
 			err_mask = AC_ERR_HOST_BUS;
-			ehi->action = ATA_EH_HARDRESET;
+			ehi->action = ATA_EH_RESET;
 			qc = ata_qc_from_tag(ap, ap->link.active_tag);
 			if (qc)
 				qc->err_mask |= err_mask;
@@ -2449,28 +2449,13 @@ static int mv_prereset(struct ata_link *link, unsigned long deadline)
 {
 	struct ata_port *ap = link->ap;
 	struct mv_port_priv *pp	= ap->private_data;
-	struct ata_eh_context *ehc = &link->eh_context;
-	int rc;
 
-	rc = mv_stop_dma(ap);
-	if (rc)
-		ehc->i.action |= ATA_EH_HARDRESET;
+	mv_stop_dma(ap);
 
-	if (!(pp->pp_flags & MV_PP_FLAG_HAD_A_RESET)) {
+	if (!(pp->pp_flags & MV_PP_FLAG_HAD_A_RESET))
 		pp->pp_flags |= MV_PP_FLAG_HAD_A_RESET;
-		ehc->i.action |= ATA_EH_HARDRESET;
-	}
-
-	/* if we're about to do hardreset, nothing more to do */
-	if (ehc->i.action & ATA_EH_HARDRESET)
-		return 0;
-
-	if (ata_link_online(link))
-		rc = ata_wait_ready(ap, deadline);
-	else
-		rc = -ENODEV;
 
-	return rc;
+	return 0;
 }
 
 static int mv_hardreset(struct ata_link *link, unsigned int *class,
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index ed5473bf7a0a..ce02e15c857c 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -929,7 +929,7 @@ static int nv_adma_check_cpb(struct ata_port *ap, int cpb_num, int force_err)
 					"notifier for tag %d with no cmd?\n",
 					cpb_num);
 			ehi->err_mask |= AC_ERR_HSM;
-			ehi->action |= ATA_EH_SOFTRESET;
+			ehi->action |= ATA_EH_RESET;
 			ata_port_freeze(ap);
 			return 1;
 		}
@@ -1892,7 +1892,7 @@ static void nv_swncq_error_handler(struct ata_port *ap)
 
 	if (ap->link.sactive) {
 		nv_swncq_ncq_stop(ap);
-		ehc->i.action |= ATA_EH_HARDRESET;
+		ehc->i.action |= ATA_EH_RESET;
 	}
 
 	ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset,
@@ -2173,7 +2173,7 @@ static int nv_swncq_sdbfis(struct ata_port *ap)
 		ata_ehi_clear_desc(ehi);
 		ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat);
 		ehi->err_mask |= AC_ERR_HOST_BUS;
-		ehi->action |= ATA_EH_SOFTRESET;
+		ehi->action |= ATA_EH_RESET;
 		return -EINVAL;
 	}
 
@@ -2188,7 +2188,7 @@ static int nv_swncq_sdbfis(struct ata_port *ap)
 		ata_ehi_push_desc(ehi, "illegal SWNCQ:qc_active transition"
 				  "(%08x->%08x)", pp->qc_active, sactive);
 		ehi->err_mask |= AC_ERR_HSM;
-		ehi->action |= ATA_EH_HARDRESET;
+		ehi->action |= ATA_EH_RESET;
 		return -EINVAL;
 	}
 	for (i = 0; i < ATA_MAX_QUEUE; i++) {
@@ -2324,7 +2324,7 @@ static void nv_swncq_host_interrupt(struct ata_port *ap, u16 fis)
 		ata_ehi_push_desc(ehi, "Ata error. fis:0x%X", fis);
 		ehi->err_mask |= AC_ERR_DEV;
 		ehi->serror |= serror;
-		ehi->action |= ATA_EH_SOFTRESET;
+		ehi->action |= ATA_EH_RESET;
 		ata_port_freeze(ap);
 		return;
 	}
@@ -2356,7 +2356,7 @@ static void nv_swncq_host_interrupt(struct ata_port *ap, u16 fis)
 		if (pp->ncq_flags & (ncq_saw_sdb | ncq_saw_backout)) {
 			ata_ehi_push_desc(ehi, "illegal fis transaction");
 			ehi->err_mask |= AC_ERR_HSM;
-			ehi->action |= ATA_EH_HARDRESET;
+			ehi->action |= ATA_EH_RESET;
 			goto irq_error;
 		}
 
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index df7988df7908..aa8d0323c9bb 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -286,45 +286,45 @@ static struct sil24_cerr_info {
 				    "device error via D2H FIS" },
 	[PORT_CERR_SDB]		= { AC_ERR_DEV, 0,
 				    "device error via SDB FIS" },
-	[PORT_CERR_DATA]	= { AC_ERR_ATA_BUS, ATA_EH_SOFTRESET,
+	[PORT_CERR_DATA]	= { AC_ERR_ATA_BUS, ATA_EH_RESET,
 				    "error in data FIS" },
-	[PORT_CERR_SEND]	= { AC_ERR_ATA_BUS, ATA_EH_SOFTRESET,
+	[PORT_CERR_SEND]	= { AC_ERR_ATA_BUS, ATA_EH_RESET,
 				    "failed to transmit command FIS" },
-	[PORT_CERR_INCONSISTENT] = { AC_ERR_HSM, ATA_EH_SOFTRESET,
+	[PORT_CERR_INCONSISTENT] = { AC_ERR_HSM, ATA_EH_RESET,
 				     "protocol mismatch" },
-	[PORT_CERR_DIRECTION]	= { AC_ERR_HSM, ATA_EH_SOFTRESET,
+	[PORT_CERR_DIRECTION]	= { AC_ERR_HSM, ATA_EH_RESET,
 				    "data directon mismatch" },
-	[PORT_CERR_UNDERRUN]	= { AC_ERR_HSM, ATA_EH_SOFTRESET,
+	[PORT_CERR_UNDERRUN]	= { AC_ERR_HSM, ATA_EH_RESET,
 				    "ran out of SGEs while writing" },
-	[PORT_CERR_OVERRUN]	= { AC_ERR_HSM, ATA_EH_SOFTRESET,
+	[PORT_CERR_OVERRUN]	= { AC_ERR_HSM, ATA_EH_RESET,
 				    "ran out of SGEs while reading" },
-	[PORT_CERR_PKT_PROT]	= { AC_ERR_HSM, ATA_EH_SOFTRESET,
+	[PORT_CERR_PKT_PROT]	= { AC_ERR_HSM, ATA_EH_RESET,
 				    "invalid data directon for ATAPI CDB" },
-	[PORT_CERR_SGT_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_SOFTRESET,
+	[PORT_CERR_SGT_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_RESET,
 				     "SGT not on qword boundary" },
-	[PORT_CERR_SGT_TGTABRT]	= { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
+	[PORT_CERR_SGT_TGTABRT]	= { AC_ERR_HOST_BUS, ATA_EH_RESET,
 				    "PCI target abort while fetching SGT" },
-	[PORT_CERR_SGT_MSTABRT]	= { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
+	[PORT_CERR_SGT_MSTABRT]	= { AC_ERR_HOST_BUS, ATA_EH_RESET,
 				    "PCI master abort while fetching SGT" },
-	[PORT_CERR_SGT_PCIPERR]	= { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
+	[PORT_CERR_SGT_PCIPERR]	= { AC_ERR_HOST_BUS, ATA_EH_RESET,
 				    "PCI parity error while fetching SGT" },
-	[PORT_CERR_CMD_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_SOFTRESET,
+	[PORT_CERR_CMD_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_RESET,
 				     "PRB not on qword boundary" },
-	[PORT_CERR_CMD_TGTABRT]	= { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
+	[PORT_CERR_CMD_TGTABRT]	= { AC_ERR_HOST_BUS, ATA_EH_RESET,
 				    "PCI target abort while fetching PRB" },
-	[PORT_CERR_CMD_MSTABRT]	= { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
+	[PORT_CERR_CMD_MSTABRT]	= { AC_ERR_HOST_BUS, ATA_EH_RESET,
 				    "PCI master abort while fetching PRB" },
-	[PORT_CERR_CMD_PCIPERR]	= { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
+	[PORT_CERR_CMD_PCIPERR]	= { AC_ERR_HOST_BUS, ATA_EH_RESET,
 				    "PCI parity error while fetching PRB" },
-	[PORT_CERR_XFR_UNDEF]	= { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
+	[PORT_CERR_XFR_UNDEF]	= { AC_ERR_HOST_BUS, ATA_EH_RESET,
 				    "undefined error while transferring data" },
-	[PORT_CERR_XFR_TGTABRT]	= { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
+	[PORT_CERR_XFR_TGTABRT]	= { AC_ERR_HOST_BUS, ATA_EH_RESET,
 				    "PCI target abort while transferring data" },
-	[PORT_CERR_XFR_MSTABRT]	= { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
+	[PORT_CERR_XFR_MSTABRT]	= { AC_ERR_HOST_BUS, ATA_EH_RESET,
 				    "PCI master abort while transferring data" },
-	[PORT_CERR_XFR_PCIPERR]	= { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
+	[PORT_CERR_XFR_PCIPERR]	= { AC_ERR_HOST_BUS, ATA_EH_RESET,
 				    "PCI parity error while transferring data" },
-	[PORT_CERR_SENDSERVICE]	= { AC_ERR_HSM, ATA_EH_SOFTRESET,
+	[PORT_CERR_SENDSERVICE]	= { AC_ERR_HSM, ATA_EH_RESET,
 				    "FIS received while sending service FIS" },
 };
 
@@ -616,7 +616,7 @@ static int sil24_init_port(struct ata_port *ap)
 
 	if ((tmp & (PORT_CS_INIT | PORT_CS_RDY)) != PORT_CS_RDY) {
 		pp->do_port_rst = 1;
-		ap->link.eh_context.i.action |= ATA_EH_HARDRESET;
+		ap->link.eh_context.i.action |= ATA_EH_RESET;
 		return -EIO;
 	}
 
@@ -1022,7 +1022,7 @@ static void sil24_error_intr(struct ata_port *ap)
 
 	if (irq_stat & PORT_IRQ_UNK_FIS) {
 		ehi->err_mask |= AC_ERR_HSM;
-		ehi->action |= ATA_EH_SOFTRESET;
+		ehi->action |= ATA_EH_RESET;
 		ata_ehi_push_desc(ehi, "unknown FIS");
 		freeze = 1;
 	}
@@ -1043,7 +1043,7 @@ static void sil24_error_intr(struct ata_port *ap)
 		 */
 		if (ap->nr_active_links >= 3) {
 			ehi->err_mask |= AC_ERR_OTHER;
-			ehi->action |= ATA_EH_HARDRESET;
+			ehi->action |= ATA_EH_RESET;
 			ata_ehi_push_desc(ehi, "PMP DMA CS errata");
 			pp->do_port_rst = 1;
 			freeze = 1;
@@ -1064,7 +1064,7 @@ static void sil24_error_intr(struct ata_port *ap)
 						  irq_stat);
 			} else {
 				err_mask |= AC_ERR_HSM;
-				action |= ATA_EH_HARDRESET;
+				action |= ATA_EH_RESET;
 				freeze = 1;
 			}
 		} else
@@ -1078,12 +1078,12 @@ static void sil24_error_intr(struct ata_port *ap)
 		if (ci && ci->desc) {
 			err_mask |= ci->err_mask;
 			action |= ci->action;
-			if (action & ATA_EH_RESET_MASK)
+			if (action & ATA_EH_RESET)
 				freeze = 1;
 			ata_ehi_push_desc(ehi, "%s", ci->desc);
 		} else {
 			err_mask |= AC_ERR_OTHER;
-			action |= ATA_EH_SOFTRESET;
+			action |= ATA_EH_RESET;
 			freeze = 1;
 			ata_ehi_push_desc(ehi, "unknown command error %d",
 					  cerr);
@@ -1153,7 +1153,7 @@ static inline void sil24_host_intr(struct ata_port *ap)
 	if (rc < 0) {
 		struct ata_eh_info *ehi = &ap->link.eh_info;
 		ehi->err_mask |= AC_ERR_HSM;
-		ehi->action |= ATA_EH_SOFTRESET;
+		ehi->action |= ATA_EH_RESET;
 		ata_port_freeze(ap);
 		return;
 	}
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 0d03f44824fb..c0e0f1d18d50 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -320,7 +320,7 @@ static int vt6420_prereset(struct ata_link *link, unsigned long deadline)
 
 	if (!online) {
 		/* tell EH to bail */
-		ehc->i.action &= ~ATA_EH_RESET_MASK;
+		ehc->i.action &= ~ATA_EH_RESET;
 		return 0;
 	}
 
-- 
cgit v1.2.2


From d692abd92f22a81b38d52c39601871003262841c Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Thu, 24 Jan 2008 00:05:14 +0900
Subject: libata: kill ATA_LFLAG_HRST_TO_RESUME

Now that hardreset is the preferred method of resetting, there's no
need for ATA_LFLAG_HRST_TO_RESUME flag.  Kill it.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/ahci.c       |  2 +-
 drivers/ata/libata-pmp.c | 16 ----------------
 drivers/ata/sata_nv.c    |  5 -----
 drivers/ata/sata_sil.c   |  5 -----
 4 files changed, 1 insertion(+), 27 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index f6bbd52b1547..66d6c8821087 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -416,7 +416,7 @@ static const struct ata_port_info ahci_port_info[] = {
 	{
 		AHCI_HFLAGS	(AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_PMP),
 		.flags		= AHCI_FLAG_COMMON,
-		.link_flags	= AHCI_LFLAG_COMMON | ATA_LFLAG_HRST_TO_RESUME,
+		.link_flags	= AHCI_LFLAG_COMMON,
 		.pio_mask	= 0x1f, /* pio0-4 */
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_vt8251_ops,
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index 8439fc8efdd6..7f8bcffa81ad 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -453,9 +453,6 @@ static void sata_pmp_quirks(struct ata_port *ap)
 	if (vendor == 0x1095 && devid == 0x3726) {
 		/* sil3726 quirks */
 		ata_port_for_each_link(link, ap) {
-			/* SError.N need a kick in the ass to get working */
-			link->flags |= ATA_LFLAG_HRST_TO_RESUME;
-
 			/* class code report is unreliable */
 			if (link->pmp < 5)
 				link->flags |= ATA_LFLAG_ASSUME_ATA;
@@ -468,9 +465,6 @@ static void sata_pmp_quirks(struct ata_port *ap)
 	} else if (vendor == 0x1095 && devid == 0x4723) {
 		/* sil4723 quirks */
 		ata_port_for_each_link(link, ap) {
-			/* SError.N need a kick in the ass to get working */
-			link->flags |= ATA_LFLAG_HRST_TO_RESUME;
-
 			/* class code report is unreliable */
 			if (link->pmp < 2)
 				link->flags |= ATA_LFLAG_ASSUME_ATA;
@@ -483,9 +477,6 @@ static void sata_pmp_quirks(struct ata_port *ap)
 	} else if (vendor == 0x1095 && devid == 0x4726) {
 		/* sil4726 quirks */
 		ata_port_for_each_link(link, ap) {
-			/* SError.N need a kick in the ass to get working */
-			link->flags |= ATA_LFLAG_HRST_TO_RESUME;
-
 			/* Class code report is unreliable and SRST
 			 * times out under certain configurations.
 			 * Config device can be at port 0 or 5 and
@@ -513,13 +504,6 @@ static void sata_pmp_quirks(struct ata_port *ap)
 		 * otherwise.  Don't try hard to recover it.
 		 */
 		ap->pmp_link[ap->nr_pmp_links - 1].flags |= ATA_LFLAG_NO_RETRY;
-	} else if (vendor == 0x11ab && devid == 0x4140) {
-		/* Marvell 88SM4140 quirks.  Fan-out ports require PHY
-		 * reset to work; other than that, it behaves very
-		 * nicely.
-		 */
-		ata_port_for_each_link(link, ap)
-			link->flags |= ATA_LFLAG_HRST_TO_RESUME;
 	}
 }
 
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index ce02e15c857c..75b76535c720 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -579,7 +579,6 @@ static const struct ata_port_info nv_port_info[] = {
 	{
 		.sht		= &nv_sht,
 		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
-		.link_flags	= ATA_LFLAG_HRST_TO_RESUME,
 		.pio_mask	= NV_PIO_MASK,
 		.mwdma_mask	= NV_MWDMA_MASK,
 		.udma_mask	= NV_UDMA_MASK,
@@ -590,7 +589,6 @@ static const struct ata_port_info nv_port_info[] = {
 	{
 		.sht		= &nv_sht,
 		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
-		.link_flags	= ATA_LFLAG_HRST_TO_RESUME,
 		.pio_mask	= NV_PIO_MASK,
 		.mwdma_mask	= NV_MWDMA_MASK,
 		.udma_mask	= NV_UDMA_MASK,
@@ -601,7 +599,6 @@ static const struct ata_port_info nv_port_info[] = {
 	{
 		.sht		= &nv_sht,
 		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
-		.link_flags	= ATA_LFLAG_HRST_TO_RESUME,
 		.pio_mask	= NV_PIO_MASK,
 		.mwdma_mask	= NV_MWDMA_MASK,
 		.udma_mask	= NV_UDMA_MASK,
@@ -613,7 +610,6 @@ static const struct ata_port_info nv_port_info[] = {
 		.sht		= &nv_adma_sht,
 		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 				  ATA_FLAG_MMIO | ATA_FLAG_NCQ,
-		.link_flags	= ATA_LFLAG_HRST_TO_RESUME,
 		.pio_mask	= NV_PIO_MASK,
 		.mwdma_mask	= NV_MWDMA_MASK,
 		.udma_mask	= NV_UDMA_MASK,
@@ -625,7 +621,6 @@ static const struct ata_port_info nv_port_info[] = {
 		.sht		= &nv_swncq_sht,
 		.flags	        = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 				  ATA_FLAG_NCQ,
-		.link_flags	= ATA_LFLAG_HRST_TO_RESUME,
 		.pio_mask	= NV_PIO_MASK,
 		.mwdma_mask	= NV_MWDMA_MASK,
 		.udma_mask	= NV_UDMA_MASK,
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 0b8191b52f97..7052915a31b6 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -60,7 +60,6 @@ enum {
 
 	SIL_DFL_PORT_FLAGS	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 				  ATA_FLAG_MMIO,
-	SIL_DFL_LINK_FLAGS	= ATA_LFLAG_HRST_TO_RESUME,
 
 	/*
 	 * Controller IDs
@@ -215,7 +214,6 @@ static const struct ata_port_info sil_port_info[] = {
 	/* sil_3112 */
 	{
 		.flags		= SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE,
-		.link_flags	= SIL_DFL_LINK_FLAGS,
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
 		.udma_mask	= ATA_UDMA5,
@@ -225,7 +223,6 @@ static const struct ata_port_info sil_port_info[] = {
 	{
 		.flags		= SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE |
 				  SIL_FLAG_NO_SATA_IRQ,
-		.link_flags	= SIL_DFL_LINK_FLAGS,
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
 		.udma_mask	= ATA_UDMA5,
@@ -234,7 +231,6 @@ static const struct ata_port_info sil_port_info[] = {
 	/* sil_3512 */
 	{
 		.flags		= SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT,
-		.link_flags	= SIL_DFL_LINK_FLAGS,
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
 		.udma_mask	= ATA_UDMA5,
@@ -243,7 +239,6 @@ static const struct ata_port_info sil_port_info[] = {
 	/* sil_3114 */
 	{
 		.flags		= SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT,
-		.link_flags	= SIL_DFL_LINK_FLAGS,
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
 		.udma_mask	= ATA_UDMA5,
-- 
cgit v1.2.2


From 672b2d65ba83a6f3f801fd3d58851aa9c0725a54 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Thu, 24 Jan 2008 00:05:14 +0900
Subject: libata: kill ATA_EHI_RESUME_LINK

ATA_EHI_RESUME_LINK has two functions - promote reset to hardreset if
ATA_LFLAG_HRST_TO_RESUME is set and preventing EH from shortcutting
reset action when probing is requested.  The former is gone now and
the latter can easily be achieved by making EH to perform at least one
reset if reset is requested, which also makes more sense than
depending on RESUME_LINK flag.

As ATA_EHI_RESUME_LINK was the only EHI reset modifier, this also
kills reset modifier handling.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/libata-eh.c   | 21 ++++++++-------------
 drivers/ata/libata-pmp.c  |  1 -
 drivers/ata/libata-scsi.c |  1 -
 3 files changed, 8 insertions(+), 15 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index f7cae6400155..e6584fa7f456 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1079,12 +1079,6 @@ void ata_eh_about_to_do(struct ata_link *link, struct ata_device *dev,
 
 	spin_lock_irqsave(ap->lock, flags);
 
-	/* suck in and clear reset modifier */
-	if (action & ATA_EH_RESET) {
-		ehc->i.flags |= ehi->flags & ATA_EHI_RESET_MODIFIER_MASK;
-		ehi->flags &= ~ATA_EHI_RESET_MODIFIER_MASK;
-	}
-
 	ata_eh_clear_action(link, dev, ehi, action);
 
 	if (!(ehc->i.flags & ATA_EHI_QUIET))
@@ -1110,10 +1104,6 @@ void ata_eh_done(struct ata_link *link, struct ata_device *dev,
 {
 	struct ata_eh_context *ehc = &link->eh_context;
 
-	/* if reset is complete, clear reset modifier */
-	if (action & ATA_EH_RESET)
-		ehc->i.flags &= ~ATA_EHI_RESET_MODIFIER_MASK;
-
 	ata_eh_clear_action(link, dev, &ehc->i, action);
 }
 
@@ -2491,6 +2481,7 @@ static int ata_link_nr_vacant(struct ata_link *link)
 
 static int ata_eh_skip_recovery(struct ata_link *link)
 {
+	struct ata_port *ap = link->ap;
 	struct ata_eh_context *ehc = &link->eh_context;
 	struct ata_device *dev;
 
@@ -2498,9 +2489,13 @@ static int ata_eh_skip_recovery(struct ata_link *link)
 	if (link->flags & ATA_LFLAG_DISABLED)
 		return 1;
 
-	/* thaw frozen port, resume link and recover failed devices */
-	if ((link->ap->pflags & ATA_PFLAG_FROZEN) ||
-	    (ehc->i.flags & ATA_EHI_RESUME_LINK) || ata_link_nr_enabled(link))
+	/* thaw frozen port and recover failed devices */
+	if ((ap->pflags & ATA_PFLAG_FROZEN) || ata_link_nr_enabled(link))
+		return 0;
+
+	/* reset at least once if reset is requested */
+	if ((ehc->i.action & ATA_EH_RESET) &&
+	    !(ehc->i.flags & ATA_EHI_DID_RESET))
 		return 0;
 
 	/* skip if class codes for all vacant slots are ATA_DEV_NONE */
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index 7f8bcffa81ad..df1d3252b9e6 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -437,7 +437,6 @@ static int sata_pmp_init_links(struct ata_port *ap, int nr_ports)
 		link->flags = 0;
 		ehc->i.probe_mask |= 1;
 		ehc->i.action |= ATA_EH_RESET;
-		ehc->i.flags |= ATA_EHI_RESUME_LINK;
 	}
 
 	return 0;
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 1f036a7b14f3..caffca7dd76f 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3517,7 +3517,6 @@ static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel,
 			struct ata_eh_info *ehi = &dev->link->eh_info;
 			ehi->probe_mask |= 1 << dev->devno;
 			ehi->action |= ATA_EH_RESET;
-			ehi->flags |= ATA_EHI_RESUME_LINK;
 		} else
 			rc = -EINVAL;
 	}
-- 
cgit v1.2.2


From 8cebf274dd1c955a6e03385a85fd6569ce445946 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Thu, 24 Jan 2008 00:05:14 +0900
Subject: libata: kill ATA_LFLAG_SKIP_D2H_BSY

Some controllers can't reliably record the initial D2H FIS after SATA
link is brought online for whatever reason.  Advanced controllers
which don't have traditional TF register based interface often have
this problem as they don't really have the TF registers to update
while the controller and link are being initialized.

SKIP_D2H_BSY works around the problem by skipping the wait for device
readiness before issuing SRST, so for such controllers libata issues
SRST blindly and hopes for the best.

Now that libata defaults to hardreset, this workaround is no longer
necessary.  For controllers which have support for hardreset, SRST is
never issued by itself.  It is only issued as follow-up SRST for
device classification and PMP initialization, so there's no need to
wait for it from prereset.

Kill ATA_LFLAG_SKIP_D2H_BSY.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/ahci.c        | 7 -------
 drivers/ata/libata-core.c | 6 ++----
 drivers/ata/sata_fsl.c    | 2 --
 drivers/ata/sata_sil24.c  | 4 ----
 4 files changed, 2 insertions(+), 17 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 66d6c8821087..1bd258e5390f 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -198,7 +198,6 @@ enum {
 					  ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
 					  ATA_FLAG_ACPI_SATA | ATA_FLAG_AN |
 					  ATA_FLAG_IPM,
-	AHCI_LFLAG_COMMON		= ATA_LFLAG_SKIP_D2H_BSY,
 
 	ICH_MAP				= 0x90, /* ICH MAP register */
 };
@@ -407,7 +406,6 @@ static const struct ata_port_info ahci_port_info[] = {
 	/* board_ahci */
 	{
 		.flags		= AHCI_FLAG_COMMON,
-		.link_flags	= AHCI_LFLAG_COMMON,
 		.pio_mask	= 0x1f, /* pio0-4 */
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
@@ -416,7 +414,6 @@ static const struct ata_port_info ahci_port_info[] = {
 	{
 		AHCI_HFLAGS	(AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_PMP),
 		.flags		= AHCI_FLAG_COMMON,
-		.link_flags	= AHCI_LFLAG_COMMON,
 		.pio_mask	= 0x1f, /* pio0-4 */
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_vt8251_ops,
@@ -425,7 +422,6 @@ static const struct ata_port_info ahci_port_info[] = {
 	{
 		AHCI_HFLAGS	(AHCI_HFLAG_IGN_IRQ_IF_ERR),
 		.flags		= AHCI_FLAG_COMMON,
-		.link_flags	= AHCI_LFLAG_COMMON,
 		.pio_mask	= 0x1f, /* pio0-4 */
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
@@ -436,7 +432,6 @@ static const struct ata_port_info ahci_port_info[] = {
 				 AHCI_HFLAG_32BIT_ONLY |
 				 AHCI_HFLAG_SECT255 | AHCI_HFLAG_NO_PMP),
 		.flags		= AHCI_FLAG_COMMON,
-		.link_flags	= AHCI_LFLAG_COMMON,
 		.pio_mask	= 0x1f, /* pio0-4 */
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
@@ -447,7 +442,6 @@ static const struct ata_port_info ahci_port_info[] = {
 				 AHCI_HFLAG_MV_PATA),
 		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 				  ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA,
-		.link_flags	= AHCI_LFLAG_COMMON,
 		.pio_mask	= 0x1f, /* pio0-4 */
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
@@ -457,7 +451,6 @@ static const struct ata_port_info ahci_port_info[] = {
 		AHCI_HFLAGS	(AHCI_HFLAG_IGN_SERR_INTERNAL |
 				 AHCI_HFLAG_NO_PMP),
 		.flags		= AHCI_FLAG_COMMON,
-		.link_flags	= AHCI_LFLAG_COMMON,
 		.pio_mask	= 0x1f, /* pio0-4 */
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 02e7ba43a3b3..baef749ec528 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3962,10 +3962,8 @@ int ata_std_prereset(struct ata_link *link, unsigned long deadline)
 					"link for reset (errno=%d)\n", rc);
 	}
 
-	/* Wait for !BSY if the controller can wait for the first D2H
-	 * Reg FIS and we don't know that no device is attached.
-	 */
-	if (!(link->flags & ATA_LFLAG_SKIP_D2H_BSY) && !ata_link_offline(link)) {
+	/* wait for !BSY if we don't know that no device is attached */
+	if (!ata_link_offline(link)) {
 		rc = ata_wait_ready(ap, deadline);
 		if (rc && rc != -ENODEV) {
 			ata_link_printk(link, KERN_WARNING, "device not ready "
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index fbd423ad23bb..d23b690ed1a1 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -35,7 +35,6 @@ enum {
 	SATA_FSL_HOST_FLAGS	= (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 				ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
 				ATA_FLAG_NCQ),
-	SATA_FSL_HOST_LFLAGS	= ATA_LFLAG_SKIP_D2H_BSY,
 
 	SATA_FSL_MAX_CMDS	= SATA_FSL_QUEUE_DEPTH,
 	SATA_FSL_CMD_HDR_SIZE	= 16,	/* 4 DWORDS */
@@ -1241,7 +1240,6 @@ static const struct ata_port_operations sata_fsl_ops = {
 static const struct ata_port_info sata_fsl_port_info[] = {
 	{
 	 .flags = SATA_FSL_HOST_FLAGS,
-	 .link_flags = SATA_FSL_HOST_LFLAGS,
 	 .pio_mask = 0x1f,	/* pio 0-4 */
 	 .udma_mask = 0x7f,	/* udma 0-6 */
 	 .port_ops = &sata_fsl_ops,
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index aa8d0323c9bb..ba0c00e8ee7f 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -254,7 +254,6 @@ enum {
 				  ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
 				  ATA_FLAG_NCQ | ATA_FLAG_ACPI_SATA |
 				  ATA_FLAG_AN | ATA_FLAG_PMP,
-	SIL24_COMMON_LFLAGS	= ATA_LFLAG_SKIP_D2H_BSY,
 	SIL24_FLAG_PCIX_IRQ_WOC	= (1 << 24), /* IRQ loss errata on PCI-X */
 
 	IRQ_STAT_4PORTS		= 0xf,
@@ -449,7 +448,6 @@ static const struct ata_port_info sil24_port_info[] = {
 	{
 		.flags		= SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(4) |
 				  SIL24_FLAG_PCIX_IRQ_WOC,
-		.link_flags	= SIL24_COMMON_LFLAGS,
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
 		.udma_mask	= ATA_UDMA5,		/* udma0-5 */
@@ -458,7 +456,6 @@ static const struct ata_port_info sil24_port_info[] = {
 	/* sil_3132 */
 	{
 		.flags		= SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(2),
-		.link_flags	= SIL24_COMMON_LFLAGS,
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
 		.udma_mask	= ATA_UDMA5,		/* udma0-5 */
@@ -467,7 +464,6 @@ static const struct ata_port_info sil24_port_info[] = {
 	/* sil_3131/sil_3531 */
 	{
 		.flags		= SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(1),
-		.link_flags	= SIL24_COMMON_LFLAGS,
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
 		.udma_mask	= ATA_UDMA5,		/* udma0-5 */
-- 
cgit v1.2.2


From b558edddb1c42c70a30cfe494984d4be409f7b2b Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Thu, 24 Jan 2008 00:05:14 +0900
Subject: libata: kill ata_ehi_schedule_probe()

ata_ehi_schedule_probe() was created to hide details of link-resuming
reset magic.  Now that all the softreset workarounds are gone,
scheduling probe is very simple - set probe_mask and request RESET.
Kill ata_ehi_schedule_probe() and open code it.  This also increases
consistency as ata_ehi_schedule_probe() couldn't cover individual
device probings so they were open-coded even when the helper existed.

While at it, define ATA_ALL_DEVICES as mask of all possible devices on
a link and always use it when requesting probe on link level for
simplicity and consistency.  Setting extra bits in the probe_mask
doesn't hurt anybody.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/libata-core.c |  3 +--
 drivers/ata/libata-eh.c   |  2 +-
 drivers/ata/libata-pmp.c  | 12 ++++++++----
 drivers/ata/libata-scsi.c |  2 +-
 4 files changed, 11 insertions(+), 8 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index baef749ec528..4dc429fd0056 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -7156,8 +7156,7 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht)
 			/* kick EH for boot probing */
 			spin_lock_irqsave(ap->lock, flags);
 
-			ehi->probe_mask =
-				(1 << ata_link_max_devices(&ap->link)) - 1;
+			ehi->probe_mask |= ATA_ALL_DEVICES;
 			ehi->action |= ATA_EH_RESET;
 			ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET;
 
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index e6584fa7f456..0d0a2c0ab9e7 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1746,7 +1746,7 @@ static void ata_eh_link_autopsy(struct ata_link *link)
 		ata_eh_analyze_serror(link);
 	} else if (rc != -EOPNOTSUPP) {
 		/* SError read failed, force reset and probing */
-		ata_ehi_schedule_probe(&ehc->i);
+		ehc->i.probe_mask |= ATA_ALL_DEVICES;
 		ehc->i.action |= ATA_EH_RESET;
 		ehc->i.err_mask |= AC_ERR_OTHER;
 	}
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index df1d3252b9e6..39e036c8a2bc 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -435,7 +435,7 @@ static int sata_pmp_init_links(struct ata_port *ap, int nr_ports)
 		struct ata_eh_context *ehc = &link->eh_context;
 
 		link->flags = 0;
-		ehc->i.probe_mask |= 1;
+		ehc->i.probe_mask |= ATA_ALL_DEVICES;
 		ehc->i.action |= ATA_EH_RESET;
 	}
 
@@ -831,8 +831,12 @@ static int sata_pmp_eh_recover_pmp(struct ata_port *ap,
 		ata_eh_thaw_port(ap);
 
 		/* PMP is reset, SErrors cannot be trusted, scan all */
-		ata_port_for_each_link(tlink, ap)
-			ata_ehi_schedule_probe(&tlink->eh_context.i);
+		ata_port_for_each_link(tlink, ap) {
+			struct ata_eh_context *ehc = &tlink->eh_context;
+
+			ehc->i.probe_mask |= ATA_ALL_DEVICES;
+			ehc->i.action |= ATA_EH_RESET;
+		}
 	}
 
 	/* If revalidation is requested, revalidate and reconfigure;
@@ -847,7 +851,7 @@ static int sata_pmp_eh_recover_pmp(struct ata_port *ap,
 		tries--;
 
 		if (rc == -ENODEV) {
-			ehc->i.probe_mask |= 1;
+			ehc->i.probe_mask |= ATA_ALL_DEVICES;
 			detach = 1;
 			/* give it just two more chances */
 			tries = min(tries, 2);
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index caffca7dd76f..798ba5e45710 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3507,7 +3507,7 @@ static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel,
 
 		ata_port_for_each_link(link, ap) {
 			struct ata_eh_info *ehi = &link->eh_info;
-			ehi->probe_mask |= (1 << ata_link_max_devices(link)) - 1;
+			ehi->probe_mask |= ATA_ALL_DEVICES;
 			ehi->action |= ATA_EH_RESET;
 		}
 	} else {
-- 
cgit v1.2.2


From f08048e94564d009b19038cfbdd800aa83e79c7f Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Tue, 25 Mar 2008 12:22:47 +0900
Subject: libata: PCI device should be powered up before being accessed

PCI device should be powered up or powered up before its PCI regsiters
are accessed.  Although PCI configuration register access is allowed
in D3hot, PCI device is free to reset its status when transiting from
D3hot to D0 causing configuration data to change.

Many libata SFF drivers which use ata_pci_init_one() read and update
configuration registers before calling ata_pci_init_one() which
enables the PCI device.  Also, in resume paths, some drivers access
registers without resuming the PCI device.

This patch adds a call to pcim_enable_device() in init path if
register is accessed before calling ata_pci_init_one() and make resume
paths first resume PCI devices, access PCI configuration regiters then
resume ATA host.

While at it...

* cmd640 was strange in that it set ->resume even when CONFIG_PM is
  not.  This is by-product of minimal build fix.  Updated.

* In cs5530, Don't BUG() on reinit failure.  Just whine and fail
  resume.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/pata_ali.c         | 14 +++++++++++++-
 drivers/ata/pata_amd.c         | 16 +++++++++++++++-
 drivers/ata/pata_artop.c       |  5 +++++
 drivers/ata/pata_cmd640.c      | 21 ++++++++++++++++-----
 drivers/ata/pata_cmd64x.c      | 15 ++++++++++++++-
 drivers/ata/pata_cs5520.c      | 15 ++++++++++++++-
 drivers/ata/pata_cs5530.c      | 18 ++++++++++++++++--
 drivers/ata/pata_hpt366.c      | 14 +++++++++++++-
 drivers/ata/pata_hpt37x.c      |  5 +++++
 drivers/ata/pata_hpt3x2n.c     |  5 +++++
 drivers/ata/pata_it821x.c      | 14 +++++++++++++-
 drivers/ata/pata_netcell.c     |  5 +++++
 drivers/ata/pata_ns87415.c     |  6 ++++++
 drivers/ata/pata_optidma.c     |  5 +++++
 drivers/ata/pata_serverworks.c | 19 ++++++++++++++++---
 drivers/ata/pata_sil680.c      | 13 +++++++++++--
 drivers/ata/pata_sis.c         |  6 +++++-
 drivers/ata/pata_sl82c105.c    |  5 +++++
 drivers/ata/pata_via.c         | 14 +++++++++++++-
 19 files changed, 195 insertions(+), 20 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index 511a830b6256..3814aebefb2d 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -637,6 +637,11 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	const struct ata_port_info *ppi[] = { NULL, NULL };
 	u8 tmp;
 	struct pci_dev *isa_bridge;
+	int rc;
+
+	rc = pcim_enable_device(pdev);
+	if (rc)
+		return rc;
 
 	/*
 	 * The chipset revision selects the driver operations and
@@ -672,8 +677,15 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 #ifdef CONFIG_PM
 static int ali_reinit_one(struct pci_dev *pdev)
 {
+	struct ata_host *host = dev_get_drvdata(&pdev->dev);
+	int rc;
+
+	rc = ata_pci_device_do_resume(pdev);
+	if (rc)
+		return rc;
 	ali_init_chipset(pdev);
-	return ata_pci_device_resume(pdev);
+	ata_host_resume(host);
+	return 0;
 }
 #endif
 
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 4b8d9b592ca4..5e1bc13a756b 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -659,10 +659,15 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	static int printed_version;
 	int type = id->driver_data;
 	u8 fifo;
+	int rc;
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
+	rc = pcim_enable_device(pdev);
+	if (rc)
+		return rc;
+
 	pci_read_config_byte(pdev, 0x41, &fifo);
 
 	/* Check for AMD7409 without swdma errata and if found adjust type */
@@ -706,6 +711,13 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 #ifdef CONFIG_PM
 static int amd_reinit_one(struct pci_dev *pdev)
 {
+	struct ata_host *host = dev_get_drvdata(&pdev->dev);
+	int rc;
+
+	rc = ata_pci_device_do_resume(pdev);
+	if (rc)
+		return rc;
+
 	if (pdev->vendor == PCI_VENDOR_ID_AMD) {
 		u8 fifo;
 		pci_read_config_byte(pdev, 0x41, &fifo);
@@ -718,7 +730,9 @@ static int amd_reinit_one(struct pci_dev *pdev)
 		    pdev->device == PCI_DEVICE_ID_AMD_COBRA_7401)
 		    	ata_pci_clear_simplex(pdev);
 	}
-	return ata_pci_device_resume(pdev);
+
+	ata_host_resume(host);
+	return 0;
 }
 #endif
 
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index d4218310327b..2f8148016971 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -446,11 +446,16 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
 		.port_ops	= &artop6260_ops,
 	};
 	const struct ata_port_info *ppi[] = { NULL, NULL };
+	int rc;
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev,
 			   "version " DRV_VERSION "\n");
 
+	rc = pcim_enable_device(pdev);
+	if (rc)
+		return rc;
+
 	if (id->driver_data == 0) {	/* 6210 variant */
 		ppi[0] = &info_6210;
 		ppi[1] = &ata_dummy_port_info;
diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c
index 43d198f90968..0ef1d1ded1f8 100644
--- a/drivers/ata/pata_cmd640.c
+++ b/drivers/ata/pata_cmd640.c
@@ -254,20 +254,31 @@ static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		.port_ops = &cmd640_port_ops
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
+	int rc;
+
+	rc = pcim_enable_device(pdev);
+	if (rc)
+		return rc;
 
 	cmd640_hardware_init(pdev);
+
 	return ata_pci_init_one(pdev, ppi);
 }
 
+#ifdef CONFIG_PM
 static int cmd640_reinit_one(struct pci_dev *pdev)
 {
+	struct ata_host *host = dev_get_drvdata(&pdev->dev);
+	int rc;
+
+	rc = ata_pci_device_do_resume(pdev);
+	if (rc)
+		return rc;
 	cmd640_hardware_init(pdev);
-#ifdef CONFIG_PM
-	return ata_pci_device_resume(pdev);
-#else
+	ata_host_resume(host);
 	return 0;
-#endif
 }
+#endif
 
 static const struct pci_device_id cmd640[] = {
 	{ PCI_VDEVICE(CMD, 0x640), 0 },
@@ -281,8 +292,8 @@ static struct pci_driver cmd640_pci_driver = {
 	.remove		= ata_pci_remove_one,
 #ifdef CONFIG_PM
 	.suspend	= ata_pci_device_suspend,
-#endif
 	.resume		= cmd640_reinit_one,
+#endif
 };
 
 static int __init cmd640_init(void)
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index 7acbbd9ee469..1c9a8d97f874 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -435,6 +435,11 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	};
 	const struct ata_port_info *ppi[] = { &cmd_info[id->driver_data], NULL };
 	u8 mrdmode;
+	int rc;
+
+	rc = pcim_enable_device(pdev);
+	if (rc)
+		return rc;
 
 	pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class_rev);
 	class_rev &= 0xFF;
@@ -470,7 +475,14 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 #ifdef CONFIG_PM
 static int cmd64x_reinit_one(struct pci_dev *pdev)
 {
+	struct ata_host *host = dev_get_drvdata(&pdev->dev);
 	u8 mrdmode;
+	int rc;
+
+	rc = ata_pci_device_do_resume(pdev);
+	if (rc)
+		return rc;
+
 	pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64);
 	pci_read_config_byte(pdev, MRDMODE, &mrdmode);
 	mrdmode &= ~ 0x30;	/* IRQ set up */
@@ -479,7 +491,8 @@ static int cmd64x_reinit_one(struct pci_dev *pdev)
 #ifdef CONFIG_PPC
 	pci_write_config_byte(pdev, UDIDETCR0, 0xF0);
 #endif
-	return ata_pci_device_resume(pdev);
+	ata_host_resume(host);
+	return 0;
 }
 #endif
 
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index 7ed279b0a12e..dd6b2355fcdc 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -203,6 +203,10 @@ static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_devi
 	struct ata_ioports *ioaddr;
 	int i, rc;
 
+	rc = pcim_enable_device(pdev);
+	if (rc)
+		return rc;
+
 	/* IDE port enable bits */
 	pci_read_config_byte(pdev, 0x60, &pcicfg);
 
@@ -310,11 +314,20 @@ static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_devi
 
 static int cs5520_reinit_one(struct pci_dev *pdev)
 {
+	struct ata_host *host = dev_get_drvdata(&pdev->dev);
 	u8 pcicfg;
+	int rc;
+
+	rc = ata_pci_device_do_resume(pdev);
+	if (rc)
+		return rc;
+
 	pci_read_config_byte(pdev, 0x60, &pcicfg);
 	if ((pcicfg & 0x40) == 0)
 		pci_write_config_byte(pdev, 0x60, pcicfg | 0x40);
-	return ata_pci_device_resume(pdev);
+
+	ata_host_resume(host);
+	return 0;
 }
 
 /**
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index e1818fdd9159..f876aeddf1a1 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -349,6 +349,11 @@ static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		.port_ops = &cs5530_port_ops
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
+	int rc;
+
+	rc = pcim_enable_device(pdev);
+	if (rc)
+		return rc;
 
 	/* Chip initialisation */
 	if (cs5530_init_chip())
@@ -364,10 +369,19 @@ static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 #ifdef CONFIG_PM
 static int cs5530_reinit_one(struct pci_dev *pdev)
 {
+	struct ata_host *host = dev_get_drvdata(&pdev->dev);
+	int rc;
+
+	rc = ata_pci_device_do_resume(pdev);
+	if (rc)
+		return rc;
+
 	/* If we fail on resume we are doomed */
 	if (cs5530_init_chip())
-		BUG();
-	return ata_pci_device_resume(pdev);
+		return -EIO;
+
+	ata_host_resume(host);
+	return 0;
 }
 #endif /* CONFIG_PM */
 
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index a742efa0da2b..a82089048f58 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -402,6 +402,11 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 
 	u32 class_rev;
 	u32 reg1;
+	int rc;
+
+	rc = pcim_enable_device(dev);
+	if (rc)
+		return rc;
 
 	pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
 	class_rev &= 0xFF;
@@ -435,8 +440,15 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 #ifdef CONFIG_PM
 static int hpt36x_reinit_one(struct pci_dev *dev)
 {
+	struct ata_host *host = dev_get_drvdata(&dev->dev);
+	int rc;
+
+	rc = ata_pci_device_do_resume(dev);
+	if (rc)
+		return rc;
 	hpt36x_init_chipset(dev);
-	return ata_pci_device_resume(dev);
+	ata_host_resume(host);
+	return 0;
 }
 #endif
 
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 9a10878b2ad8..2ddcd07a7518 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -966,6 +966,11 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 
 	const struct hpt_chip *chip_table;
 	int clock_slot;
+	int rc;
+
+	rc = pcim_enable_device(dev);
+	if (rc)
+		return rc;
 
 	pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
 	class_rev &= 0xFF;
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index 9f1c084f846f..3a517cb9bd3e 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -505,6 +505,11 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	unsigned int f_low, f_high;
 	int adjust;
 	unsigned long iobase = pci_resource_start(dev, 4);
+	int rc;
+
+	rc = pcim_enable_device(dev);
+	if (rc)
+		return rc;
 
 	pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
 	class_rev &= 0xFF;
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 257951d03dbb..6bdbb7140dfa 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -759,6 +759,11 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	const struct ata_port_info *ppi[] = { NULL, NULL };
 	static char *mode[2] = { "pass through", "smart" };
+	int rc;
+
+	rc = pcim_enable_device(pdev);
+	if (rc)
+		return rc;
 
 	/* Force the card into bypass mode if so requested */
 	if (it8212_noraid) {
@@ -780,10 +785,17 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 #ifdef CONFIG_PM
 static int it821x_reinit_one(struct pci_dev *pdev)
 {
+	struct ata_host *host = dev_get_drvdata(&pdev->dev);
+	int rc;
+
+	rc = ata_pci_device_do_resume(pdev);
+	if (rc)
+		return rc;
 	/* Resume - turn raid back off if need be */
 	if (it8212_noraid)
 		it821x_disable_raid(pdev);
-	return ata_pci_device_resume(pdev);
+	ata_host_resume(host);
+	return rc;
 }
 #endif
 
diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c
index 25c922abd554..0e4a08e15209 100644
--- a/drivers/ata/pata_netcell.c
+++ b/drivers/ata/pata_netcell.c
@@ -100,11 +100,16 @@ static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 		.port_ops	= &netcell_ops,
 	};
 	const struct ata_port_info *port_info[] = { &info, NULL };
+	int rc;
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev,
 			   "version " DRV_VERSION "\n");
 
+	rc = pcim_enable_device(pdev);
+	if (rc)
+		return rc;
+
 	/* Any chip specific setup/optimisation/messages here */
 	ata_pci_clear_simplex(pdev);
 
diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c
index d0e2e50823b1..93eb958cb0c9 100644
--- a/drivers/ata/pata_ns87415.c
+++ b/drivers/ata/pata_ns87415.c
@@ -410,6 +410,7 @@ static int ns87415_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 		.port_ops	= &ns87415_pata_ops,
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
+	int rc;
 #if defined(CONFIG_SUPERIO)
 	static const struct ata_port_info info87560 = {
 		.sht		= &ns87415_sht,
@@ -425,6 +426,11 @@ static int ns87415_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev,
 			   "version " DRV_VERSION "\n");
+
+	rc = pcim_enable_device(pdev);
+	if (rc)
+		return rc;
+
 	/* Select 512 byte sectors */
 	pci_write_config_byte(pdev, 0x55, 0xEE);
 	/* Select PIO0 8bit clocking */
diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index f9b485a487ae..be8c421dc2aa 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -497,10 +497,15 @@ static int optidma_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	};
 	const struct ata_port_info *ppi[] = { &info_82c700, NULL };
 	static int printed_version;
+	int rc;
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");
 
+	rc = pcim_enable_device(dev);
+	if (rc)
+		return rc;
+
 	/* Fixed location chipset magic */
 	inw(0x1F1);
 	inw(0x1F1);
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index a589c0fa0dbb..6702df37cfed 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -498,6 +498,11 @@ static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id
 		}
 	};
 	const struct ata_port_info *ppi[] = { &info[id->driver_data], NULL };
+	int rc;
+
+	rc = pcim_enable_device(pdev);
+	if (rc)
+		return rc;
 
 	/* Force master latency timer to 64 PCI clocks */
 	pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x40);
@@ -535,11 +540,17 @@ static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id
 #ifdef CONFIG_PM
 static int serverworks_reinit_one(struct pci_dev *pdev)
 {
+	struct ata_host *host = dev_get_drvdata(&pdev->dev);
+	int rc;
+
+	rc = ata_pci_device_do_resume(pdev);
+	if (rc)
+		return rc;
+
 	/* Force master latency timer to 64 PCI clocks */
 	pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x40);
 
-	switch (pdev->device)
-	{
+	switch (pdev->device) {
 		case PCI_DEVICE_ID_SERVERWORKS_OSB4IDE:
 			serverworks_fixup_osb4(pdev);
 			break;
@@ -554,7 +565,9 @@ static int serverworks_reinit_one(struct pci_dev *pdev)
 			serverworks_fixup_ht1000(pdev);
 			break;
 	}
-	return ata_pci_device_resume(pdev);
+
+	ata_host_resume(host);
+	return 0;
 }
 #endif
 
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 7c5b2dd9a1a1..f4dc09718cab 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -346,6 +346,10 @@ static int __devinit sil680_init_one(struct pci_dev *pdev,
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
+	rc = pcim_enable_device(pdev);
+	if (rc)
+		return rc;
+
 	switch (sil680_init_chip(pdev, &try_mmio)) {
 		case 0:
 			ppi[0] = &info_slow;
@@ -406,10 +410,15 @@ use_ioports:
 #ifdef CONFIG_PM
 static int sil680_reinit_one(struct pci_dev *pdev)
 {
-	int try_mmio;
+	struct ata_host *host = dev_get_drvdata(&pdev->dev);
+	int try_mmio, rc;
 
+	rc = ata_pci_device_do_resume(pdev);
+	if (rc)
+		return rc;
 	sil680_init_chip(pdev, &try_mmio);
-	return ata_pci_device_resume(pdev);
+	ata_host_resume(host);
+	return 0;
 }
 #endif
 
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index dc7e91562e43..abda90f51247 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -862,6 +862,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	struct pci_dev *host = NULL;
 	struct sis_chipset *chipset = NULL;
 	struct sis_chipset *sets;
+	int rc;
 
 	static struct sis_chipset sis_chipsets[] = {
 
@@ -914,8 +915,11 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 		dev_printk(KERN_DEBUG, &pdev->dev,
 			   "version " DRV_VERSION "\n");
 
-	/* We have to find the bridge first */
+	rc = pcim_enable_device(pdev);
+	if (rc)
+		return rc;
 
+	/* We have to find the bridge first */
 	for (sets = &sis_chipsets[0]; sets->device; sets++) {
 		host = pci_get_device(PCI_VENDOR_ID_SI, sets->device, NULL);
 		if (host != NULL) {
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index 81ef207f8265..6c37181341ea 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -344,6 +344,11 @@ static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id
 					       NULL };
 	u32 val;
 	int rev;
+	int rc;
+
+	rc = pcim_enable_device(dev);
+	if (rc)
+		return rc;
 
 	rev = sl82c105_bridge_revision(dev);
 
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index d119a68c388f..24430f70f00e 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -524,10 +524,15 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	static int printed_version;
 	u8 enable;
 	u32 timing;
+	int rc;
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
+	rc = pcim_enable_device(pdev);
+	if (rc)
+		return rc;
+
 	/* To find out how the IDE will behave and what features we
 	   actually have to look at the bridge not the IDE controller */
 	for (config = via_isa_bridges; config->id; config++)
@@ -615,6 +620,11 @@ static int via_reinit_one(struct pci_dev *pdev)
 	u32 timing;
 	struct ata_host *host = dev_get_drvdata(&pdev->dev);
 	const struct via_isa_bridge *config = host->private_data;
+	int rc;
+
+	rc = ata_pci_device_do_resume(pdev);
+	if (rc)
+		return rc;
 
 	via_config_fifo(pdev, config->flags);
 
@@ -630,7 +640,9 @@ static int via_reinit_one(struct pci_dev *pdev)
 		timing &= ~0x80008;
 		pci_write_config_dword(pdev, 0x50, timing);
 	}
-	return ata_pci_device_resume(pdev);
+
+	ata_host_resume(host);
+	return 0;
 }
 #endif
 
-- 
cgit v1.2.2


From 358f9a77a668660729e705fde9c3cf69f013aa98 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Tue, 25 Mar 2008 12:22:47 +0900
Subject: libata: implement and use ata_noop_irq_clear()

->irq_clear() is used to clear IRQ bit of a SFF controller and isn't
useful for drivers which don't use libata SFF HSM implementation.
However, it's a required callback and many drivers implement their own
noop version as placeholder.  This patch implements ata_noop_irq_clear
and use it to replace those custom placeholders.

Also, SFF drivers which don't support BMDMA don't need to use
ata_bmdma_irq_clear().  It becomes noop if BMDMA address isn't
initialized.  Convert them to use ata_noop_irq_clear().

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/ahci.c           | 12 +++---------
 drivers/ata/libata-core.c    |  1 +
 drivers/ata/libata-sff.c     |  8 ++++++++
 drivers/ata/pata_ali.c       |  2 +-
 drivers/ata/pata_at32.c      |  7 +------
 drivers/ata/pata_icside.c    |  7 +------
 drivers/ata/pata_isapnp.c    |  2 +-
 drivers/ata/pata_ixp4xx_cf.c |  2 +-
 drivers/ata/pata_legacy.c    | 22 +++++++++++-----------
 drivers/ata/pata_mpc52xx.c   |  2 +-
 drivers/ata/pata_mpiix.c     |  2 +-
 drivers/ata/pata_ns87410.c   |  2 +-
 drivers/ata/pata_pcmcia.c    |  4 ++--
 drivers/ata/pata_platform.c  |  2 +-
 drivers/ata/pata_qdi.c       |  4 ++--
 drivers/ata/pata_rb500_cf.c  |  6 +-----
 drivers/ata/pata_winbond.c   |  2 +-
 drivers/ata/pdc_adma.c       |  8 +-------
 drivers/ata/sata_fsl.c       |  7 +------
 drivers/ata/sata_inic162x.c  |  7 +------
 drivers/ata/sata_mv.c        | 11 +++--------
 drivers/ata/sata_qstor.c     |  8 +-------
 drivers/ata/sata_sil24.c     |  8 +-------
 23 files changed, 46 insertions(+), 90 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 1bd258e5390f..492e521715d6 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -244,7 +244,6 @@ static int ahci_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val);
 static int ahci_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val);
 static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
 static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc);
-static void ahci_irq_clear(struct ata_port *ap);
 static int ahci_port_start(struct ata_port *ap);
 static void ahci_port_stop(struct ata_port *ap);
 static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
@@ -307,7 +306,7 @@ static const struct ata_port_operations ahci_ops = {
 	.qc_prep		= ahci_qc_prep,
 	.qc_issue		= ahci_qc_issue,
 
-	.irq_clear		= ahci_irq_clear,
+	.irq_clear		= ata_noop_irq_clear,
 
 	.scr_read		= ahci_scr_read,
 	.scr_write		= ahci_scr_write,
@@ -343,7 +342,7 @@ static const struct ata_port_operations ahci_vt8251_ops = {
 	.qc_prep		= ahci_qc_prep,
 	.qc_issue		= ahci_qc_issue,
 
-	.irq_clear		= ahci_irq_clear,
+	.irq_clear		= ata_noop_irq_clear,
 
 	.scr_read		= ahci_scr_read,
 	.scr_write		= ahci_scr_write,
@@ -377,7 +376,7 @@ static const struct ata_port_operations ahci_p5wdh_ops = {
 	.qc_prep		= ahci_qc_prep,
 	.qc_issue		= ahci_qc_issue,
 
-	.irq_clear		= ahci_irq_clear,
+	.irq_clear		= ata_noop_irq_clear,
 
 	.scr_read		= ahci_scr_read,
 	.scr_write		= ahci_scr_write,
@@ -1769,11 +1768,6 @@ static void ahci_port_intr(struct ata_port *ap)
 	}
 }
 
-static void ahci_irq_clear(struct ata_port *ap)
-{
-	/* TODO */
-}
-
 static irqreturn_t ahci_interrupt(int irq, void *dev_instance)
 {
 	struct ata_host *host = dev_instance;
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 4dc429fd0056..394edf937cf2 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -7824,6 +7824,7 @@ EXPORT_SYMBOL_GPL(ata_noop_qc_prep);
 EXPORT_SYMBOL_GPL(ata_bmdma_setup);
 EXPORT_SYMBOL_GPL(ata_bmdma_start);
 EXPORT_SYMBOL_GPL(ata_bmdma_irq_clear);
+EXPORT_SYMBOL_GPL(ata_noop_irq_clear);
 EXPORT_SYMBOL_GPL(ata_bmdma_status);
 EXPORT_SYMBOL_GPL(ata_bmdma_stop);
 EXPORT_SYMBOL_GPL(ata_bmdma_freeze);
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 20dc572fb45a..1cf03d41aa33 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -302,6 +302,14 @@ void ata_bmdma_irq_clear(struct ata_port *ap)
 	iowrite8(ioread8(mmio + ATA_DMA_STATUS), mmio + ATA_DMA_STATUS);
 }
 
+/**
+ *	ata_noop_irq_clear - Noop placeholder for irq_clear
+ *	@ap: Port associated with this ATA transaction.
+ */
+void ata_noop_irq_clear(struct ata_port *ap)
+{
+}
+
 /**
  *	ata_bmdma_status - Read PCI IDE BMDMA status
  *	@ap: Port associated with this ATA transaction.
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index 3814aebefb2d..84b748aef386 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -380,7 +380,7 @@ static struct ata_port_operations ali_early_port_ops = {
 	.data_xfer	= ata_data_xfer,
 
 	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
+	.irq_clear	= ata_noop_irq_clear,
 	.irq_on		= ata_irq_on,
 
 	.port_start	= ata_sff_port_start,
diff --git a/drivers/ata/pata_at32.c b/drivers/ata/pata_at32.c
index db057b183d60..27c959f35c2c 100644
--- a/drivers/ata/pata_at32.c
+++ b/drivers/ata/pata_at32.c
@@ -166,11 +166,6 @@ static void pata_at32_set_piomode(struct ata_port *ap, struct ata_device *adev)
 	}
 }
 
-static void pata_at32_irq_clear(struct ata_port *ap)
-{
-	/* No DMA controller yet */
-}
-
 static struct scsi_host_template at32_sht = {
 	.module			= THIS_MODULE,
 	.name			= DRV_NAME,
@@ -208,7 +203,7 @@ static struct ata_port_operations at32_port_ops = {
 
 	.data_xfer		= ata_data_xfer,
 
-	.irq_clear		= pata_at32_irq_clear,
+	.irq_clear		= ata_noop_irq_clear,
 	.irq_on			= ata_irq_on,
 
 	.port_start		= ata_sff_port_start,
diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c
index f97068be2d79..e1230cae7ff1 100644
--- a/drivers/ata/pata_icside.c
+++ b/drivers/ata/pata_icside.c
@@ -322,11 +322,6 @@ static struct scsi_host_template pata_icside_sht = {
 	.bios_param		= ata_std_bios_param,
 };
 
-/* wish this was exported from libata-core */
-static void ata_dummy_noret(struct ata_port *port)
-{
-}
-
 static void pata_icside_postreset(struct ata_link *link, unsigned int *classes)
 {
 	struct ata_port *ap = link->ap;
@@ -380,7 +375,7 @@ static struct ata_port_operations pata_icside_port_ops = {
 	.error_handler		= pata_icside_error_handler,
 	.post_internal_cmd	= pata_icside_bmdma_stop,
 
-	.irq_clear		= ata_dummy_noret,
+	.irq_clear		= ata_noop_irq_clear,
 	.irq_on			= ata_irq_on,
 
 	.bmdma_stop		= pata_icside_bmdma_stop,
diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c
index 4320e7986321..ef561de0c24d 100644
--- a/drivers/ata/pata_isapnp.c
+++ b/drivers/ata/pata_isapnp.c
@@ -55,7 +55,7 @@ static struct ata_port_operations isapnp_port_ops = {
 
 	.data_xfer	= ata_data_xfer,
 
-	.irq_clear	= ata_bmdma_irq_clear,
+	.irq_clear	= ata_noop_irq_clear,
 	.irq_on		= ata_irq_on,
 
 	.port_start	= ata_sff_port_start,
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index 030878fedeb5..83e38cc077e1 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -126,7 +126,7 @@ static struct ata_port_operations ixp4xx_port_ops = {
 	.cable_detect		= ata_cable_40wire,
 
 	.irq_handler		= ata_interrupt,
-	.irq_clear		= ata_bmdma_irq_clear,
+	.irq_clear		= ata_noop_irq_clear,
 	.irq_on			= ata_irq_on,
 
 	.port_start		= ata_port_start,
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index 50fe08ebe23c..6ac02f7d5289 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -252,7 +252,7 @@ static struct ata_port_operations simple_port_ops = {
 	.data_xfer	= ata_data_xfer_noirq,
 
 	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
+	.irq_clear	= ata_noop_irq_clear,
 	.irq_on		= ata_irq_on,
 
 	.port_start	= ata_sff_port_start,
@@ -279,7 +279,7 @@ static struct ata_port_operations legacy_port_ops = {
 	.data_xfer	= ata_data_xfer_noirq,
 
 	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
+	.irq_clear	= ata_noop_irq_clear,
 	.irq_on		= ata_irq_on,
 
 	.port_start	= ata_sff_port_start,
@@ -393,7 +393,7 @@ static struct ata_port_operations pdc20230_port_ops = {
 	.data_xfer	= pdc_data_xfer_vlb,
 
 	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
+	.irq_clear	= ata_noop_irq_clear,
 	.irq_on		= ata_irq_on,
 
 	.port_start	= ata_sff_port_start,
@@ -447,7 +447,7 @@ static struct ata_port_operations ht6560a_port_ops = {
 	.data_xfer	= ata_data_xfer,	/* Check vlb/noirq */
 
 	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
+	.irq_clear	= ata_noop_irq_clear,
 	.irq_on		= ata_irq_on,
 
 	.port_start	= ata_sff_port_start,
@@ -512,7 +512,7 @@ static struct ata_port_operations ht6560b_port_ops = {
 	.data_xfer	= ata_data_xfer,    /* FIXME: Check 32bit and noirq */
 
 	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
+	.irq_clear	= ata_noop_irq_clear,
 	.irq_on		= ata_irq_on,
 
 	.port_start	= ata_sff_port_start,
@@ -633,7 +633,7 @@ static struct ata_port_operations opti82c611a_port_ops = {
 	.data_xfer	= ata_data_xfer,
 
 	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
+	.irq_clear	= ata_noop_irq_clear,
 	.irq_on		= ata_irq_on,
 
 	.port_start	= ata_sff_port_start,
@@ -765,7 +765,7 @@ static struct ata_port_operations opti82c46x_port_ops = {
 	.data_xfer	= ata_data_xfer,
 
 	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
+	.irq_clear	= ata_noop_irq_clear,
 	.irq_on		= ata_irq_on,
 
 	.port_start	= ata_sff_port_start,
@@ -950,7 +950,7 @@ static struct ata_port_operations qdi6500_port_ops = {
 	.data_xfer	= vlb32_data_xfer,
 
 	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
+	.irq_clear	= ata_noop_irq_clear,
 	.irq_on		= ata_irq_on,
 
 	.port_start	= ata_sff_port_start,
@@ -977,7 +977,7 @@ static struct ata_port_operations qdi6580_port_ops = {
 	.data_xfer	= vlb32_data_xfer,
 
 	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
+	.irq_clear	= ata_noop_irq_clear,
 	.irq_on		= ata_irq_on,
 
 	.port_start	= ata_sff_port_start,
@@ -1004,7 +1004,7 @@ static struct ata_port_operations qdi6580dp_port_ops = {
 	.data_xfer	= vlb32_data_xfer,
 
 	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
+	.irq_clear	= ata_noop_irq_clear,
 	.irq_on		= ata_irq_on,
 
 	.port_start	= ata_sff_port_start,
@@ -1095,7 +1095,7 @@ static struct ata_port_operations winbond_port_ops = {
 
 	.data_xfer	= vlb32_data_xfer,
 
-	.irq_clear	= ata_bmdma_irq_clear,
+	.irq_clear	= ata_noop_irq_clear,
 	.irq_on		= ata_irq_on,
 
 	.port_start	= ata_sff_port_start,
diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c
index 5413ebfa72e5..d84e0c8ea02f 100644
--- a/drivers/ata/pata_mpc52xx.c
+++ b/drivers/ata/pata_mpc52xx.c
@@ -296,7 +296,7 @@ static struct ata_port_operations mpc52xx_ata_port_ops = {
 	.qc_prep		= ata_qc_prep,
 	.qc_issue		= ata_qc_issue_prot,
 	.data_xfer		= ata_data_xfer,
-	.irq_clear		= ata_bmdma_irq_clear,
+	.irq_clear		= ata_noop_irq_clear,
 	.irq_on			= ata_irq_on,
 	.port_start		= ata_port_start,
 };
diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c
index c0d9e0cf208c..ced6372749b3 100644
--- a/drivers/ata/pata_mpiix.c
+++ b/drivers/ata/pata_mpiix.c
@@ -187,7 +187,7 @@ static struct ata_port_operations mpiix_port_ops = {
 	.qc_issue	= mpiix_qc_issue_prot,
 	.data_xfer	= ata_data_xfer,
 
-	.irq_clear	= ata_bmdma_irq_clear,
+	.irq_clear	= ata_noop_irq_clear,
 	.irq_on		= ata_irq_on,
 
 	.port_start	= ata_sff_port_start,
diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c
index 9fe66fd75017..d182bdf31ee1 100644
--- a/drivers/ata/pata_ns87410.c
+++ b/drivers/ata/pata_ns87410.c
@@ -182,7 +182,7 @@ static struct ata_port_operations ns87410_port_ops = {
 	.data_xfer	= ata_data_xfer,
 
 	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
+	.irq_clear	= ata_noop_irq_clear,
 	.irq_on		= ata_irq_on,
 
 	.port_start	= ata_sff_port_start,
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 3e7f6a9da28b..9881a9e004a4 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -164,7 +164,7 @@ static struct ata_port_operations pcmcia_port_ops = {
 
 	.data_xfer	= ata_data_xfer_noirq,
 
-	.irq_clear	= ata_bmdma_irq_clear,
+	.irq_clear	= ata_noop_irq_clear,
 	.irq_on		= ata_irq_on,
 
 	.port_start	= ata_sff_port_start,
@@ -189,7 +189,7 @@ static struct ata_port_operations pcmcia_8bit_port_ops = {
 
 	.data_xfer	= ata_data_xfer_8bit,
 
-	.irq_clear	= ata_bmdma_irq_clear,
+	.irq_clear	= ata_noop_irq_clear,
 	.irq_on		= ata_irq_on,
 
 	.port_start	= ata_sff_port_start,
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index aad7adc6ea56..a8429f5c3006 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -86,7 +86,7 @@ static struct ata_port_operations pata_platform_port_ops = {
 
 	.data_xfer		= ata_data_xfer_noirq,
 
-	.irq_clear		= ata_bmdma_irq_clear,
+	.irq_clear		= ata_noop_irq_clear,
 	.irq_on			= ata_irq_on,
 
 	.port_start		= ata_dummy_ret0,
diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c
index 9f308ed76cc8..60238d5748a7 100644
--- a/drivers/ata/pata_qdi.c
+++ b/drivers/ata/pata_qdi.c
@@ -191,7 +191,7 @@ static struct ata_port_operations qdi6500_port_ops = {
 
 	.data_xfer	= qdi_data_xfer,
 
-	.irq_clear	= ata_bmdma_irq_clear,
+	.irq_clear	= ata_noop_irq_clear,
 	.irq_on		= ata_irq_on,
 
 	.port_start	= ata_sff_port_start,
@@ -217,7 +217,7 @@ static struct ata_port_operations qdi6580_port_ops = {
 
 	.data_xfer	= qdi_data_xfer,
 
-	.irq_clear	= ata_bmdma_irq_clear,
+	.irq_clear	= ata_noop_irq_clear,
 	.irq_on		= ata_irq_on,
 
 	.port_start	= ata_sff_port_start,
diff --git a/drivers/ata/pata_rb500_cf.c b/drivers/ata/pata_rb500_cf.c
index 4ce9b03fe6c8..08c32af1c84d 100644
--- a/drivers/ata/pata_rb500_cf.c
+++ b/drivers/ata/pata_rb500_cf.c
@@ -117,10 +117,6 @@ static irqreturn_t rb500_pata_irq_handler(int irq, void *dev_instance)
 	return IRQ_HANDLED;
 }
 
-static void rb500_pata_irq_clear(struct ata_port *ap)
-{
-}
-
 static int rb500_pata_port_start(struct ata_port *ap)
 {
 	return 0;
@@ -144,7 +140,7 @@ static struct ata_port_operations rb500_pata_port_ops = {
 	.error_handler		= ata_bmdma_error_handler,
 
 	.irq_handler		= rb500_pata_irq_handler,
-	.irq_clear		= rb500_pata_irq_clear,
+	.irq_clear		= ata_noop_irq_clear,
 	.irq_on			= ata_irq_on,
 
 	.port_start		= rb500_pata_port_start,
diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c
index 99c92eda217b..5318248782bb 100644
--- a/drivers/ata/pata_winbond.c
+++ b/drivers/ata/pata_winbond.c
@@ -159,7 +159,7 @@ static struct ata_port_operations winbond_port_ops = {
 
 	.data_xfer	= winbond_data_xfer,
 
-	.irq_clear	= ata_bmdma_irq_clear,
+	.irq_clear	= ata_noop_irq_clear,
 	.irq_on		= ata_irq_on,
 
 	.port_start	= ata_sff_port_start,
diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c
index 8e1b7e9c0ae4..bc2d12a2da30 100644
--- a/drivers/ata/pdc_adma.c
+++ b/drivers/ata/pdc_adma.c
@@ -138,7 +138,6 @@ static unsigned int adma_qc_issue(struct ata_queued_cmd *qc);
 static int adma_check_atapi_dma(struct ata_queued_cmd *qc);
 static void adma_bmdma_stop(struct ata_queued_cmd *qc);
 static u8 adma_bmdma_status(struct ata_port *ap);
-static void adma_irq_clear(struct ata_port *ap);
 static void adma_freeze(struct ata_port *ap);
 static void adma_thaw(struct ata_port *ap);
 static void adma_error_handler(struct ata_port *ap);
@@ -174,7 +173,7 @@ static const struct ata_port_operations adma_ata_ops = {
 	.freeze			= adma_freeze,
 	.thaw			= adma_thaw,
 	.error_handler		= adma_error_handler,
-	.irq_clear		= adma_irq_clear,
+	.irq_clear		= ata_noop_irq_clear,
 	.irq_on			= ata_irq_on,
 	.port_start		= adma_port_start,
 	.port_stop		= adma_port_stop,
@@ -223,11 +222,6 @@ static u8 adma_bmdma_status(struct ata_port *ap)
 	return 0;
 }
 
-static void adma_irq_clear(struct ata_port *ap)
-{
-	/* nothing */
-}
-
 static void adma_reset_engine(struct ata_port *ap)
 {
 	void __iomem *chan = ADMA_PORT_REGS(ap);
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index d23b690ed1a1..031a512cbaa8 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -933,11 +933,6 @@ static void sata_fsl_post_internal_cmd(struct ata_queued_cmd *qc)
 	}
 }
 
-static void sata_fsl_irq_clear(struct ata_port *ap)
-{
-	/* unused */
-}
-
 static void sata_fsl_error_intr(struct ata_port *ap)
 {
 	struct ata_link *link = &ap->link;
@@ -1223,7 +1218,7 @@ static const struct ata_port_operations sata_fsl_ops = {
 
 	.qc_prep = sata_fsl_qc_prep,
 	.qc_issue = sata_fsl_qc_issue,
-	.irq_clear = sata_fsl_irq_clear,
+	.irq_clear = ata_noop_irq_clear,
 
 	.scr_read = sata_fsl_scr_read,
 	.scr_write = sata_fsl_scr_write,
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index 59e65edc5820..74f14369dc8d 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -266,11 +266,6 @@ static u8 inic_bmdma_status(struct ata_port *ap)
 	return ATA_DMA_INTR;
 }
 
-static void inic_irq_clear(struct ata_port *ap)
-{
-	/* noop */
-}
-
 static void inic_host_intr(struct ata_port *ap)
 {
 	void __iomem *port_base = inic_port_base(ap);
@@ -555,7 +550,7 @@ static struct ata_port_operations inic_port_ops = {
 	.bmdma_stop		= inic_bmdma_stop,
 	.bmdma_status		= inic_bmdma_status,
 
-	.irq_clear		= inic_irq_clear,
+	.irq_clear		= ata_noop_irq_clear,
 	.irq_on			= ata_irq_on,
 
 	.qc_prep	 	= ata_qc_prep,
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index a4944c8ad46d..b3b3da4eaa03 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -461,7 +461,6 @@ struct mv_hw_ops {
 	void (*reset_bus)(struct ata_host *host, void __iomem *mmio);
 };
 
-static void mv_irq_clear(struct ata_port *ap);
 static int mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in, u32 *val);
 static int mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val);
 static int mv5_scr_read(struct ata_port *ap, unsigned int sc_reg_in, u32 *val);
@@ -564,7 +563,7 @@ static const struct ata_port_operations mv5_ops = {
 	.qc_issue		= mv_qc_issue,
 	.data_xfer		= ata_data_xfer,
 
-	.irq_clear		= mv_irq_clear,
+	.irq_clear		= ata_noop_irq_clear,
 	.irq_on			= ata_irq_on,
 
 	.error_handler		= mv_error_handler,
@@ -592,7 +591,7 @@ static const struct ata_port_operations mv6_ops = {
 	.qc_issue		= mv_qc_issue,
 	.data_xfer		= ata_data_xfer,
 
-	.irq_clear		= mv_irq_clear,
+	.irq_clear		= ata_noop_irq_clear,
 	.irq_on			= ata_irq_on,
 
 	.error_handler		= mv_error_handler,
@@ -620,7 +619,7 @@ static const struct ata_port_operations mv_iie_ops = {
 	.qc_issue		= mv_qc_issue,
 	.data_xfer		= ata_data_xfer,
 
-	.irq_clear		= mv_irq_clear,
+	.irq_clear		= ata_noop_irq_clear,
 	.irq_on			= ata_irq_on,
 
 	.error_handler		= mv_error_handler,
@@ -801,10 +800,6 @@ static inline int mv_get_hc_count(unsigned long port_flags)
 	return ((port_flags & MV_FLAG_DUAL_HC) ? 2 : 1);
 }
 
-static void mv_irq_clear(struct ata_port *ap)
-{
-}
-
 static void mv_set_edma_ptrs(void __iomem *port_mmio,
 			     struct mv_host_priv *hpriv,
 			     struct mv_port_priv *pp)
diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c
index 91cc12c82040..3c8e97f251f9 100644
--- a/drivers/ata/sata_qstor.c
+++ b/drivers/ata/sata_qstor.c
@@ -121,7 +121,6 @@ static unsigned int qs_qc_issue(struct ata_queued_cmd *qc);
 static int qs_check_atapi_dma(struct ata_queued_cmd *qc);
 static void qs_bmdma_stop(struct ata_queued_cmd *qc);
 static u8 qs_bmdma_status(struct ata_port *ap);
-static void qs_irq_clear(struct ata_port *ap);
 static void qs_freeze(struct ata_port *ap);
 static void qs_thaw(struct ata_port *ap);
 static void qs_error_handler(struct ata_port *ap);
@@ -157,7 +156,7 @@ static const struct ata_port_operations qs_ata_ops = {
 	.freeze			= qs_freeze,
 	.thaw			= qs_thaw,
 	.error_handler		= qs_error_handler,
-	.irq_clear		= qs_irq_clear,
+	.irq_clear		= ata_noop_irq_clear,
 	.irq_on			= ata_irq_on,
 	.scr_read		= qs_scr_read,
 	.scr_write		= qs_scr_write,
@@ -211,11 +210,6 @@ static u8 qs_bmdma_status(struct ata_port *ap)
 	return 0;
 }
 
-static void qs_irq_clear(struct ata_port *ap)
-{
-	/* nothing */
-}
-
 static inline void qs_enter_reg_mode(struct ata_port *ap)
 {
 	u8 __iomem *chan = qs_mmio_base(ap->host) + (ap->port_no * 0x4000);
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index ba0c00e8ee7f..b85464d51f68 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -348,7 +348,6 @@ static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
 static int sil24_qc_defer(struct ata_queued_cmd *qc);
 static void sil24_qc_prep(struct ata_queued_cmd *qc);
 static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc);
-static void sil24_irq_clear(struct ata_port *ap);
 static void sil24_pmp_attach(struct ata_port *ap);
 static void sil24_pmp_detach(struct ata_port *ap);
 static void sil24_freeze(struct ata_port *ap);
@@ -416,7 +415,7 @@ static const struct ata_port_operations sil24_ops = {
 	.qc_prep		= sil24_qc_prep,
 	.qc_issue		= sil24_qc_issue,
 
-	.irq_clear		= sil24_irq_clear,
+	.irq_clear		= ata_noop_irq_clear,
 
 	.scr_read		= sil24_scr_read,
 	.scr_write		= sil24_scr_write,
@@ -921,11 +920,6 @@ static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc)
 	return 0;
 }
 
-static void sil24_irq_clear(struct ata_port *ap)
-{
-	/* unused */
-}
-
 static void sil24_pmp_attach(struct ata_port *ap)
 {
 	sil24_config_pmp(ap, 1);
-- 
cgit v1.2.2


From 6bd99b4e0998571808fc1f09d5162348f21ff8c1 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Tue, 25 Mar 2008 12:22:48 +0900
Subject: libata: normalize port_info, port_operations and sht tables

Over the time, port info, ops and sht structures developed quite a bit
of inconsistencies.  This patch updates drivers.

* Enable/disable_pm callbacks added to all ahci ops tables.

* Every driver for SFF controllers now uses ata_sff_port_start()
  instead of ata_port_start() unless the driver has custom
  implementation.

* Every driver for SFF controllers now uses ata_pci_default_filter()
  unless the driver has custom implementation.

* Removed an odd port_info->sht initialization from ata_piix.c.
  Likely a merge byproduct.

* A port which has ATA_FLAG_SATA set doesn't need to set cable_detect
  to ata_cable_sata().  Remove it from via and mv port ops.

* Some drivers had unnecessary .max_sectors initialization which is
  ignored and was missing .slave_destroy callback.  Fixed.

* Removed unnecessary sht initializations port_info's.

* Removed onsolete scsi device suspend/resume callbacks from
  pata_bf54x.

* No reason to set ata_pci_default_filter() and bmdma functions for
  PIO-only drivers.  Remove those callbacks and replace
  ata_bmdma_irq_clear with ata_noop_irq_clear.

* pata_platform sets port_start to ata_dummy_ret0.  port_start can
  just be set to NULL.

* sata_fsl supports NCQ but was missing qc_defer.  Fixed.

* pata_rb600_cf implements dummy port_start.  Removed.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/ahci.c           |  8 ++++++++
 drivers/ata/ata_generic.c    |  1 +
 drivers/ata/ata_piix.c       | 13 +++++++------
 drivers/ata/pata_artop.c     |  1 +
 drivers/ata/pata_bf54x.c     |  1 -
 drivers/ata/pata_cmd64x.c    |  6 +++---
 drivers/ata/pata_cs5520.c    |  1 +
 drivers/ata/pata_cs5536.c    |  2 +-
 drivers/ata/pata_hpt3x3.c    |  1 -
 drivers/ata/pata_it8213.c    |  2 +-
 drivers/ata/pata_ixp4xx_cf.c |  3 +--
 drivers/ata/pata_jmicron.c   |  3 ++-
 drivers/ata/pata_marvell.c   |  1 +
 drivers/ata/pata_mpc52xx.c   |  4 ++--
 drivers/ata/pata_netcell.c   |  1 +
 drivers/ata/pata_opti.c      |  7 +------
 drivers/ata/pata_optidma.c   |  2 ++
 drivers/ata/pata_platform.c  |  4 ----
 drivers/ata/pata_rb500_cf.c  |  9 +--------
 drivers/ata/pata_rz1000.c    |  7 +------
 drivers/ata/sata_fsl.c       |  1 +
 drivers/ata/sata_mv.c        |  6 ------
 drivers/ata/sata_nv.c        | 11 ++++++++---
 drivers/ata/sata_sil.c       |  3 ++-
 drivers/ata/sata_sis.c       |  3 ++-
 drivers/ata/sata_svw.c       |  3 ++-
 drivers/ata/sata_uli.c       |  3 ++-
 drivers/ata/sata_via.c       | 12 ++++++++----
 drivers/ata/sata_vsc.c       |  3 ++-
 29 files changed, 62 insertions(+), 60 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 492e521715d6..c6ea44a7f2a9 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -336,6 +336,8 @@ static const struct ata_port_operations ahci_vt8251_ops = {
 	.check_altstatus	= ahci_check_status,
 	.dev_select		= ata_noop_dev_select,
 
+	.dev_config		= ahci_dev_config,
+
 	.tf_read		= ahci_tf_read,
 
 	.qc_defer		= sata_pmp_qc_defer_cmd_switch,
@@ -360,6 +362,8 @@ static const struct ata_port_operations ahci_vt8251_ops = {
 	.port_suspend		= ahci_port_suspend,
 	.port_resume		= ahci_port_resume,
 #endif
+	.enable_pm		= ahci_enable_alpm,
+	.disable_pm		= ahci_disable_alpm,
 
 	.port_start		= ahci_port_start,
 	.port_stop		= ahci_port_stop,
@@ -370,6 +374,8 @@ static const struct ata_port_operations ahci_p5wdh_ops = {
 	.check_altstatus	= ahci_check_status,
 	.dev_select		= ata_noop_dev_select,
 
+	.dev_config		= ahci_dev_config,
+
 	.tf_read		= ahci_tf_read,
 
 	.qc_defer		= sata_pmp_qc_defer_cmd_switch,
@@ -394,6 +400,8 @@ static const struct ata_port_operations ahci_p5wdh_ops = {
 	.port_suspend		= ahci_port_suspend,
 	.port_resume		= ahci_port_resume,
 #endif
+	.enable_pm		= ahci_enable_alpm,
+	.disable_pm		= ahci_disable_alpm,
 
 	.port_start		= ahci_port_start,
 	.port_stop		= ahci_port_stop,
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index 20534202fc79..db4c3cb78fda 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -114,6 +114,7 @@ static struct scsi_host_template generic_sht = {
 
 static struct ata_port_operations generic_port_ops = {
 	.set_mode	= generic_set_mode,
+	.mode_filter	= ata_pci_default_filter,
 
 	.tf_load	= ata_tf_load,
 	.tf_read	= ata_tf_read,
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index fae8404254c0..067760a16889 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -336,7 +336,7 @@ static const struct ata_port_operations piix_pata_ops = {
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 
-	.port_start		= ata_port_start,
+	.port_start		= ata_sff_port_start,
 };
 
 static const struct ata_port_operations ich_pata_ops = {
@@ -367,7 +367,7 @@ static const struct ata_port_operations ich_pata_ops = {
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 
-	.port_start		= ata_port_start,
+	.port_start		= ata_sff_port_start,
 };
 
 static const struct ata_port_operations piix_sata_ops = {
@@ -385,6 +385,7 @@ static const struct ata_port_operations piix_sata_ops = {
 	.qc_issue		= ata_qc_issue_prot,
 	.data_xfer		= ata_data_xfer,
 
+	.mode_filter		= ata_pci_default_filter,
 	.freeze			= ata_bmdma_freeze,
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= ata_bmdma_error_handler,
@@ -393,7 +394,7 @@ static const struct ata_port_operations piix_sata_ops = {
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 
-	.port_start		= ata_port_start,
+	.port_start		= ata_sff_port_start,
 };
 
 static const struct ata_port_operations piix_vmw_ops = {
@@ -425,7 +426,7 @@ static const struct ata_port_operations piix_vmw_ops = {
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 
-	.port_start		= ata_port_start,
+	.port_start		= ata_sff_port_start,
 };
 
 static const struct ata_port_operations piix_sidpr_sata_ops = {
@@ -446,6 +447,7 @@ static const struct ata_port_operations piix_sidpr_sata_ops = {
 	.scr_read		= piix_sidpr_scr_read,
 	.scr_write		= piix_sidpr_scr_write,
 
+	.mode_filter		= ata_pci_default_filter,
 	.freeze			= ata_bmdma_freeze,
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= piix_sidpr_error_handler,
@@ -454,7 +456,7 @@ static const struct ata_port_operations piix_sidpr_sata_ops = {
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 
-	.port_start		= ata_port_start,
+	.port_start		= ata_sff_port_start,
 };
 
 static const struct piix_map_db ich5_map_db = {
@@ -683,7 +685,6 @@ static struct ata_port_info piix_port_info[] = {
 
 	[piix_pata_vmw] =
 	{
-		.sht		= &piix_sht,
 		.flags		= PIIX_PATA_FLAGS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index 2f8148016971..a238c7bd0bba 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -367,6 +367,7 @@ static const struct ata_port_operations artop6210_ops = {
 static const struct ata_port_operations artop6260_ops = {
 	.set_piomode		= artop6260_set_piomode,
 	.set_dmamode		= artop6260_set_dmamode,
+	.mode_filter		= ata_pci_default_filter,
 
 	.tf_load		= ata_tf_load,
 	.tf_read		= ata_tf_read,
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index 7f87f105c2f6..146c202d5834 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -1409,7 +1409,6 @@ static const struct ata_port_operations bfin_pata_ops = {
 
 static struct ata_port_info bfin_port_info[] = {
 	{
-		.sht		= &bfin_sht,
 		.flags		= ATA_FLAG_SLAVE_POSS
 				| ATA_FLAG_MMIO
 				| ATA_FLAG_NO_LEGACY,
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index 1c9a8d97f874..e8c1262341ee 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -313,7 +313,7 @@ static struct ata_port_operations cmd64x_port_ops = {
 	.irq_clear	= ata_bmdma_irq_clear,
 	.irq_on		= ata_irq_on,
 
-	.port_start	= ata_port_start,
+	.port_start	= ata_sff_port_start,
 };
 
 static struct ata_port_operations cmd646r1_port_ops = {
@@ -346,7 +346,7 @@ static struct ata_port_operations cmd646r1_port_ops = {
 	.irq_clear	= ata_bmdma_irq_clear,
 	.irq_on		= ata_irq_on,
 
-	.port_start	= ata_port_start,
+	.port_start	= ata_sff_port_start,
 };
 
 static struct ata_port_operations cmd648_port_ops = {
@@ -379,7 +379,7 @@ static struct ata_port_operations cmd648_port_ops = {
 	.irq_clear	= ata_bmdma_irq_clear,
 	.irq_on		= ata_irq_on,
 
-	.port_start	= ata_port_start,
+	.port_start	= ata_sff_port_start,
 };
 
 static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index dd6b2355fcdc..44ad2c9d488f 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -160,6 +160,7 @@ static struct scsi_host_template cs5520_sht = {
 static struct ata_port_operations cs5520_port_ops = {
 	.set_piomode		= cs5520_set_piomode,
 	.set_dmamode		= cs5520_set_dmamode,
+	.mode_filter		= ata_pci_default_filter,
 
 	.tf_load		= ata_tf_load,
 	.tf_read		= ata_tf_read,
diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c
index 1c4ff9b52b5c..391aa888f8fd 100644
--- a/drivers/ata/pata_cs5536.c
+++ b/drivers/ata/pata_cs5536.c
@@ -269,7 +269,7 @@ static struct ata_port_operations cs5536_port_ops = {
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 
-	.port_start		= ata_port_start,
+	.port_start		= ata_sff_port_start,
 };
 
 /**
diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
index cb8bdb6887de..c09f95a4a0d1 100644
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -189,7 +189,6 @@ static int hpt3x3_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	static int printed_version;
 	static const struct ata_port_info info = {
-		.sht = &hpt3x3_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 #if defined(CONFIG_PATA_HPT3X3_DMA)
diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c
index e0c2cc29d0ca..25c49c2e1519 100644
--- a/drivers/ata/pata_it8213.c
+++ b/drivers/ata/pata_it8213.c
@@ -250,13 +250,13 @@ static struct scsi_host_template it8213_sht = {
 	.can_queue		= ATA_DEF_QUEUE,
 	.this_id		= ATA_SHT_THIS_ID,
 	.sg_tablesize		= LIBATA_MAX_PRD,
-	.max_sectors		= ATA_MAX_SECTORS,
 	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
 	.emulated		= ATA_SHT_EMULATED,
 	.use_clustering		= ATA_SHT_USE_CLUSTERING,
 	.proc_name		= DRV_NAME,
 	.dma_boundary		= ATA_DMA_BOUNDARY,
 	.slave_configure	= ata_scsi_slave_config,
+	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
 };
 
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index 83e38cc077e1..6eb8cc9a3f12 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -107,7 +107,6 @@ static struct scsi_host_template ixp4xx_sht = {
 
 static struct ata_port_operations ixp4xx_port_ops = {
 	.set_mode		= ixp4xx_set_mode,
-	.mode_filter		= ata_pci_default_filter,
 
 	.tf_load		= ata_tf_load,
 	.tf_read		= ata_tf_read,
@@ -129,7 +128,7 @@ static struct ata_port_operations ixp4xx_port_ops = {
 	.irq_clear		= ata_noop_irq_clear,
 	.irq_on			= ata_irq_on,
 
-	.port_start		= ata_port_start,
+	.port_start		= ata_sff_port_start,
 };
 
 static void ixp4xx_setup_port(struct ata_port *ap,
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 00bbbbd50e97..7d36fa85435a 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -148,6 +148,7 @@ static const struct ata_port_operations jmicron_ops = {
 	.exec_command		= ata_exec_command,
 	.dev_select		= ata_std_dev_select,
 
+	.mode_filter		= ata_pci_default_filter,
 	.freeze			= ata_bmdma_freeze,
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= jmicron_error_handler,
@@ -168,7 +169,7 @@ static const struct ata_port_operations jmicron_ops = {
 	.irq_on			= ata_irq_on,
 
 	/* Generic PATA PCI ATA helpers */
-	.port_start		= ata_port_start,
+	.port_start		= ata_sff_port_start,
 };
 
 
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index a81f25d87235..c4ee9b45301f 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -118,6 +118,7 @@ static const struct ata_port_operations marvell_ops = {
 	.exec_command		= ata_exec_command,
 	.dev_select		= ata_std_dev_select,
 
+	.mode_filter		= ata_pci_default_filter,
 	.freeze			= ata_bmdma_freeze,
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= marvell_error_handler,
diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c
index d84e0c8ea02f..fefe71dbed1a 100644
--- a/drivers/ata/pata_mpc52xx.c
+++ b/drivers/ata/pata_mpc52xx.c
@@ -272,13 +272,13 @@ static struct scsi_host_template mpc52xx_ata_sht = {
 	.can_queue		= ATA_DEF_QUEUE,
 	.this_id		= ATA_SHT_THIS_ID,
 	.sg_tablesize		= LIBATA_MAX_PRD,
-	.max_sectors		= ATA_MAX_SECTORS,
 	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
 	.emulated		= ATA_SHT_EMULATED,
 	.use_clustering		= ATA_SHT_USE_CLUSTERING,
 	.proc_name		= DRV_NAME,
 	.dma_boundary		= ATA_DMA_BOUNDARY,
 	.slave_configure	= ata_scsi_slave_config,
+	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
 };
 
@@ -298,7 +298,7 @@ static struct ata_port_operations mpc52xx_ata_port_ops = {
 	.data_xfer		= ata_data_xfer,
 	.irq_clear		= ata_noop_irq_clear,
 	.irq_on			= ata_irq_on,
-	.port_start		= ata_port_start,
+	.port_start		= ata_sff_port_start,
 };
 
 static int __devinit
diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c
index 0e4a08e15209..9fd1a84c01d3 100644
--- a/drivers/ata/pata_netcell.c
+++ b/drivers/ata/pata_netcell.c
@@ -47,6 +47,7 @@ static const struct ata_port_operations netcell_ops = {
 	.exec_command		= ata_exec_command,
 	.dev_select		= ata_std_dev_select,
 
+	.mode_filter		= ata_pci_default_filter,
 	.freeze			= ata_bmdma_freeze,
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= ata_bmdma_error_handler,
diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c
index 8f79447b6151..1e865f138d1c 100644
--- a/drivers/ata/pata_opti.c
+++ b/drivers/ata/pata_opti.c
@@ -196,18 +196,13 @@ static struct ata_port_operations opti_port_ops = {
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
 	.cable_detect	= ata_cable_40wire,
 
-	.bmdma_setup 	= ata_bmdma_setup,
-	.bmdma_start 	= ata_bmdma_start,
-	.bmdma_stop	= ata_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= ata_qc_issue_prot,
 
 	.data_xfer	= ata_data_xfer,
 
 	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
+	.irq_clear	= ata_noop_irq_clear,
 	.irq_on		= ata_irq_on,
 
 	.port_start	= ata_sff_port_start,
diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index be8c421dc2aa..3f9d03599f23 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -370,6 +370,7 @@ static struct scsi_host_template optidma_sht = {
 static struct ata_port_operations optidma_port_ops = {
 	.set_piomode	= optidma_set_pio_mode,
 	.set_dmamode	= optidma_set_dma_mode,
+	.mode_filter	= ata_pci_default_filter,
 
 	.tf_load	= ata_tf_load,
 	.tf_read	= ata_tf_read,
@@ -404,6 +405,7 @@ static struct ata_port_operations optidma_port_ops = {
 static struct ata_port_operations optiplus_port_ops = {
 	.set_piomode	= optiplus_set_pio_mode,
 	.set_dmamode	= optiplus_set_dma_mode,
+	.mode_filter	= ata_pci_default_filter,
 
 	.tf_load	= ata_tf_load,
 	.tf_read	= ata_tf_read,
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index a8429f5c3006..602f5562d6fb 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -46,8 +46,6 @@ static int pata_platform_set_mode(struct ata_link *link, struct ata_device **unu
 	return 0;
 }
 
-static int ata_dummy_ret0(struct ata_port *ap)	{ return 0; }
-
 static struct scsi_host_template pata_platform_sht = {
 	.module			= THIS_MODULE,
 	.name			= DRV_NAME,
@@ -88,8 +86,6 @@ static struct ata_port_operations pata_platform_port_ops = {
 
 	.irq_clear		= ata_noop_irq_clear,
 	.irq_on			= ata_irq_on,
-
-	.port_start		= ata_dummy_ret0,
 };
 
 static void pata_platform_setup_port(struct ata_ioports *ioaddr,
diff --git a/drivers/ata/pata_rb500_cf.c b/drivers/ata/pata_rb500_cf.c
index 08c32af1c84d..22cb9e1a02f5 100644
--- a/drivers/ata/pata_rb500_cf.c
+++ b/drivers/ata/pata_rb500_cf.c
@@ -117,11 +117,6 @@ static irqreturn_t rb500_pata_irq_handler(int irq, void *dev_instance)
 	return IRQ_HANDLED;
 }
 
-static int rb500_pata_port_start(struct ata_port *ap)
-{
-	return 0;
-}
-
 static struct ata_port_operations rb500_pata_port_ops = {
 	.tf_load		= ata_tf_load,
 	.tf_read		= ata_tf_read,
@@ -138,12 +133,10 @@ static struct ata_port_operations rb500_pata_port_ops = {
 	.freeze			= rb500_pata_freeze,
 	.thaw			= rb500_pata_thaw,
 	.error_handler		= ata_bmdma_error_handler,
+	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
 
-	.irq_handler		= rb500_pata_irq_handler,
 	.irq_clear		= ata_noop_irq_clear,
 	.irq_on			= ata_irq_on,
-
-	.port_start		= rb500_pata_port_start,
 };
 
 /* ------------------------------------------------------------------------ */
diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index ba8a31c55edb..75b252111106 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -79,11 +79,6 @@ static struct ata_port_operations rz1000_port_ops = {
 	.exec_command	= ata_exec_command,
 	.dev_select 	= ata_std_dev_select,
 
-	.bmdma_setup 	= ata_bmdma_setup,
-	.bmdma_start 	= ata_bmdma_start,
-	.bmdma_stop	= ata_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= ata_qc_issue_prot,
 
@@ -96,7 +91,7 @@ static struct ata_port_operations rz1000_port_ops = {
 	.cable_detect	= ata_cable_40wire,
 
 	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
+	.irq_clear	= ata_noop_irq_clear,
 	.irq_on		= ata_irq_on,
 
 	.port_start	= ata_sff_port_start,
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 031a512cbaa8..8389ecac62cd 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -1216,6 +1216,7 @@ static const struct ata_port_operations sata_fsl_ops = {
 
 	.tf_read = sata_fsl_tf_read,
 
+	.qc_defer = ata_std_qc_defer,
 	.qc_prep = sata_fsl_qc_prep,
 	.qc_issue = sata_fsl_qc_issue,
 	.irq_clear = ata_noop_irq_clear,
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index b3b3da4eaa03..4685bce745bb 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -557,8 +557,6 @@ static const struct ata_port_operations mv5_ops = {
 	.exec_command		= ata_exec_command,
 	.dev_select		= ata_std_dev_select,
 
-	.cable_detect		= ata_cable_sata,
-
 	.qc_prep		= mv_qc_prep,
 	.qc_issue		= mv_qc_issue,
 	.data_xfer		= ata_data_xfer,
@@ -585,8 +583,6 @@ static const struct ata_port_operations mv6_ops = {
 	.exec_command		= ata_exec_command,
 	.dev_select		= ata_std_dev_select,
 
-	.cable_detect		= ata_cable_sata,
-
 	.qc_prep		= mv_qc_prep,
 	.qc_issue		= mv_qc_issue,
 	.data_xfer		= ata_data_xfer,
@@ -613,8 +609,6 @@ static const struct ata_port_operations mv_iie_ops = {
 	.exec_command		= ata_exec_command,
 	.dev_select		= ata_std_dev_select,
 
-	.cable_detect		= ata_cable_sata,
-
 	.qc_prep		= mv_qc_prep_iie,
 	.qc_issue		= mv_qc_issue,
 	.data_xfer		= ata_data_xfer,
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 75b76535c720..bd5b6c35ee5d 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -452,6 +452,7 @@ static const struct ata_port_operations nv_generic_ops = {
 	.bmdma_status		= ata_bmdma_status,
 	.qc_prep		= ata_qc_prep,
 	.qc_issue		= ata_qc_issue_prot,
+	.mode_filter		= ata_pci_default_filter,
 	.freeze			= ata_bmdma_freeze,
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= nv_error_handler,
@@ -461,7 +462,7 @@ static const struct ata_port_operations nv_generic_ops = {
 	.irq_on			= ata_irq_on,
 	.scr_read		= nv_scr_read,
 	.scr_write		= nv_scr_write,
-	.port_start		= ata_port_start,
+	.port_start		= ata_sff_port_start,
 };
 
 static const struct ata_port_operations nv_nf2_ops = {
@@ -476,6 +477,7 @@ static const struct ata_port_operations nv_nf2_ops = {
 	.bmdma_status		= ata_bmdma_status,
 	.qc_prep		= ata_qc_prep,
 	.qc_issue		= ata_qc_issue_prot,
+	.mode_filter		= ata_pci_default_filter,
 	.freeze			= nv_nf2_freeze,
 	.thaw			= nv_nf2_thaw,
 	.error_handler		= nv_error_handler,
@@ -485,7 +487,7 @@ static const struct ata_port_operations nv_nf2_ops = {
 	.irq_on			= ata_irq_on,
 	.scr_read		= nv_scr_read,
 	.scr_write		= nv_scr_write,
-	.port_start		= ata_port_start,
+	.port_start		= ata_sff_port_start,
 };
 
 static const struct ata_port_operations nv_ck804_ops = {
@@ -500,6 +502,7 @@ static const struct ata_port_operations nv_ck804_ops = {
 	.bmdma_status		= ata_bmdma_status,
 	.qc_prep		= ata_qc_prep,
 	.qc_issue		= ata_qc_issue_prot,
+	.mode_filter		= ata_pci_default_filter,
 	.freeze			= nv_ck804_freeze,
 	.thaw			= nv_ck804_thaw,
 	.error_handler		= nv_error_handler,
@@ -509,7 +512,7 @@ static const struct ata_port_operations nv_ck804_ops = {
 	.irq_on			= ata_irq_on,
 	.scr_read		= nv_scr_read,
 	.scr_write		= nv_scr_write,
-	.port_start		= ata_port_start,
+	.port_start		= ata_sff_port_start,
 	.host_stop		= nv_ck804_host_stop,
 };
 
@@ -527,6 +530,7 @@ static const struct ata_port_operations nv_adma_ops = {
 	.qc_defer		= ata_std_qc_defer,
 	.qc_prep		= nv_adma_qc_prep,
 	.qc_issue		= nv_adma_qc_issue,
+	.mode_filter		= ata_pci_default_filter,
 	.freeze			= nv_adma_freeze,
 	.thaw			= nv_adma_thaw,
 	.error_handler		= nv_adma_error_handler,
@@ -558,6 +562,7 @@ static const struct ata_port_operations nv_swncq_ops = {
 	.qc_defer		= ata_std_qc_defer,
 	.qc_prep		= nv_swncq_qc_prep,
 	.qc_issue		= nv_swncq_qc_issue,
+	.mode_filter		= ata_pci_default_filter,
 	.freeze			= nv_mcp55_freeze,
 	.thaw			= nv_mcp55_thaw,
 	.error_handler		= nv_swncq_error_handler,
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 7052915a31b6..53f0bae3be43 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -192,6 +192,7 @@ static const struct ata_port_operations sil_ops = {
 	.exec_command		= ata_exec_command,
 	.dev_select		= ata_std_dev_select,
 	.set_mode		= sil_set_mode,
+	.mode_filter		= ata_pci_default_filter,
 	.bmdma_setup            = ata_bmdma_setup,
 	.bmdma_start            = ata_bmdma_start,
 	.bmdma_stop		= ata_bmdma_stop,
@@ -207,7 +208,7 @@ static const struct ata_port_operations sil_ops = {
 	.irq_on			= ata_irq_on,
 	.scr_read		= sil_scr_read,
 	.scr_write		= sil_scr_write,
-	.port_start		= ata_port_start,
+	.port_start		= ata_sff_port_start,
 };
 
 static const struct ata_port_info sil_port_info[] = {
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
index a01260a56432..a8adef9786b7 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -116,6 +116,7 @@ static const struct ata_port_operations sis_ops = {
 	.qc_prep		= ata_qc_prep,
 	.qc_issue		= ata_qc_issue_prot,
 	.data_xfer		= ata_data_xfer,
+	.mode_filter		= ata_pci_default_filter,
 	.freeze			= ata_bmdma_freeze,
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= ata_bmdma_error_handler,
@@ -124,7 +125,7 @@ static const struct ata_port_operations sis_ops = {
 	.irq_on			= ata_irq_on,
 	.scr_read		= sis_scr_read,
 	.scr_write		= sis_scr_write,
-	.port_start		= ata_port_start,
+	.port_start		= ata_sff_port_start,
 };
 
 static const struct ata_port_info sis_port_info = {
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index 019e367b59fc..aa690142fa90 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -362,6 +362,7 @@ static const struct ata_port_operations k2_sata_ops = {
 	.qc_prep		= ata_qc_prep,
 	.qc_issue		= ata_qc_issue_prot,
 	.data_xfer		= ata_data_xfer,
+	.mode_filter		= ata_pci_default_filter,
 	.freeze			= ata_bmdma_freeze,
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= ata_bmdma_error_handler,
@@ -370,7 +371,7 @@ static const struct ata_port_operations k2_sata_ops = {
 	.irq_on			= ata_irq_on,
 	.scr_read		= k2_sata_scr_read,
 	.scr_write		= k2_sata_scr_write,
-	.port_start		= ata_port_start,
+	.port_start		= ata_sff_port_start,
 };
 
 static const struct ata_port_info k2_port_info[] = {
diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c
index e710e71b7b92..f7fc0450478b 100644
--- a/drivers/ata/sata_uli.c
+++ b/drivers/ata/sata_uli.c
@@ -108,6 +108,7 @@ static const struct ata_port_operations uli_ops = {
 	.qc_issue		= ata_qc_issue_prot,
 	.data_xfer		= ata_data_xfer,
 
+	.mode_filter		= ata_pci_default_filter,
 	.freeze			= ata_bmdma_freeze,
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= ata_bmdma_error_handler,
@@ -119,7 +120,7 @@ static const struct ata_port_operations uli_ops = {
 	.scr_read		= uli_scr_read,
 	.scr_write		= uli_scr_write,
 
-	.port_start		= ata_port_start,
+	.port_start		= ata_sff_port_start,
 };
 
 static const struct ata_port_info uli_port_info = {
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index c0e0f1d18d50..f66ffd7da54e 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -118,6 +118,8 @@ static struct scsi_host_template svia_sht = {
 };
 
 static const struct ata_port_operations vt6420_sata_ops = {
+	.mode_filter		= ata_pci_default_filter,
+
 	.tf_load		= ata_tf_load,
 	.tf_read		= ata_tf_read,
 	.check_status		= ata_check_status,
@@ -141,12 +143,13 @@ static const struct ata_port_operations vt6420_sata_ops = {
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 
-	.port_start		= ata_port_start,
+	.port_start		= ata_sff_port_start,
 };
 
 static const struct ata_port_operations vt6421_pata_ops = {
 	.set_piomode		= vt6421_set_pio_mode,
 	.set_dmamode		= vt6421_set_dma_mode,
+	.mode_filter		= ata_pci_default_filter,
 
 	.tf_load		= ata_tf_load,
 	.tf_read		= ata_tf_read,
@@ -172,10 +175,12 @@ static const struct ata_port_operations vt6421_pata_ops = {
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 
-	.port_start		= ata_port_start,
+	.port_start		= ata_sff_port_start,
 };
 
 static const struct ata_port_operations vt6421_sata_ops = {
+	.mode_filter		= ata_pci_default_filter,
+
 	.tf_load		= ata_tf_load,
 	.tf_read		= ata_tf_read,
 	.check_status		= ata_check_status,
@@ -195,7 +200,6 @@ static const struct ata_port_operations vt6421_sata_ops = {
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-	.cable_detect		= ata_cable_sata,
 
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
@@ -203,7 +207,7 @@ static const struct ata_port_operations vt6421_sata_ops = {
 	.scr_read		= svia_scr_read,
 	.scr_write		= svia_scr_write,
 
-	.port_start		= ata_port_start,
+	.port_start		= ata_sff_port_start,
 };
 
 static const struct ata_port_info vt6420_port_info = {
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index 95ae3ed24a9d..099a2ba4cd4f 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -331,6 +331,7 @@ static const struct ata_port_operations vsc_sata_ops = {
 	.qc_prep		= ata_qc_prep,
 	.qc_issue		= ata_qc_issue_prot,
 	.data_xfer		= ata_data_xfer,
+	.mode_filter		= ata_pci_default_filter,
 	.freeze			= vsc_freeze,
 	.thaw			= vsc_thaw,
 	.error_handler		= ata_bmdma_error_handler,
@@ -339,7 +340,7 @@ static const struct ata_port_operations vsc_sata_ops = {
 	.irq_on			= ata_irq_on,
 	.scr_read		= vsc_sata_scr_read,
 	.scr_write		= vsc_sata_scr_write,
-	.port_start		= ata_port_start,
+	.port_start		= ata_sff_port_start,
 };
 
 static void __devinit vsc_sata_setup_port(struct ata_ioports *port,
-- 
cgit v1.2.2


From 68d1d07b510bb57a504588adc2bd2758adea0965 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Tue, 25 Mar 2008 12:22:49 +0900
Subject: libata: implement and use SHT initializers

libata lets low level drivers build scsi_host_template and register it
to the SCSI layer.  This allows low level drivers high level of
flexibility but also burdens them with lots of boilerplate entries.

This patch implements SHT initializers which can be used to initialize
all the boilerplate entries in a sht.  Three variants of them are
implemented - BASE, BMDMA and NCQ - for different types of drivers.
Note that entries can be overriden by putting individual initializers
after the helper macro.

All sht tables are identical before and after this patch.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/ahci.c              | 15 +--------------
 drivers/ata/ata_generic.c       | 16 +---------------
 drivers/ata/ata_piix.c          | 16 +---------------
 drivers/ata/pata_acpi.c         | 17 +----------------
 drivers/ata/pata_ali.c          | 16 +---------------
 drivers/ata/pata_amd.c          | 16 +---------------
 drivers/ata/pata_artop.c        | 16 +---------------
 drivers/ata/pata_at32.c         | 16 +---------------
 drivers/ata/pata_atiixp.c       | 15 +--------------
 drivers/ata/pata_bf54x.c        | 14 +-------------
 drivers/ata/pata_cmd640.c       | 16 +---------------
 drivers/ata/pata_cmd64x.c       | 16 +---------------
 drivers/ata/pata_cs5520.c       | 15 +--------------
 drivers/ata/pata_cs5530.c       | 17 ++---------------
 drivers/ata/pata_cs5535.c       | 16 +---------------
 drivers/ata/pata_cs5536.c       | 16 +---------------
 drivers/ata/pata_cypress.c      | 16 +---------------
 drivers/ata/pata_efar.c         | 16 +---------------
 drivers/ata/pata_hpt366.c       | 16 +---------------
 drivers/ata/pata_hpt37x.c       | 16 +---------------
 drivers/ata/pata_hpt3x2n.c      | 16 +---------------
 drivers/ata/pata_hpt3x3.c       | 16 +---------------
 drivers/ata/pata_icside.c       | 14 +-------------
 drivers/ata/pata_isapnp.c       | 16 +---------------
 drivers/ata/pata_it8213.c       | 16 +---------------
 drivers/ata/pata_it821x.c       | 16 +---------------
 drivers/ata/pata_ixp4xx_cf.c    | 16 +---------------
 drivers/ata/pata_jmicron.c      | 17 +----------------
 drivers/ata/pata_legacy.c       | 16 +---------------
 drivers/ata/pata_marvell.c      | 17 +----------------
 drivers/ata/pata_mpc52xx.c      | 16 +---------------
 drivers/ata/pata_mpiix.c        | 16 +---------------
 drivers/ata/pata_netcell.c      | 17 +----------------
 drivers/ata/pata_ninja32.c      | 16 +---------------
 drivers/ata/pata_ns87410.c      | 16 +---------------
 drivers/ata/pata_ns87415.c      | 16 +---------------
 drivers/ata/pata_oldpiix.c      | 16 +---------------
 drivers/ata/pata_opti.c         | 16 +---------------
 drivers/ata/pata_optidma.c      | 16 +---------------
 drivers/ata/pata_pcmcia.c       | 16 +---------------
 drivers/ata/pata_pdc2027x.c     | 16 +---------------
 drivers/ata/pata_pdc202xx_old.c | 16 +---------------
 drivers/ata/pata_platform.c     | 16 +---------------
 drivers/ata/pata_qdi.c          | 16 +---------------
 drivers/ata/pata_radisys.c      | 16 +---------------
 drivers/ata/pata_rb500_cf.c     | 17 +----------------
 drivers/ata/pata_rz1000.c       | 16 +---------------
 drivers/ata/pata_sc1200.c       | 17 ++---------------
 drivers/ata/pata_scc.c          | 16 +---------------
 drivers/ata/pata_serverworks.c  | 16 +---------------
 drivers/ata/pata_sil680.c       | 16 +---------------
 drivers/ata/pata_sis.c          | 16 +---------------
 drivers/ata/pata_sl82c105.c     | 16 +---------------
 drivers/ata/pata_triflex.c      | 16 +---------------
 drivers/ata/pata_via.c          | 16 +---------------
 drivers/ata/pata_winbond.c      | 16 +---------------
 drivers/ata/pdc_adma.c          | 14 +-------------
 drivers/ata/sata_fsl.c          | 14 +-------------
 drivers/ata/sata_inic162x.c     | 16 +---------------
 drivers/ata/sata_mv.c           | 28 ++-------------------------
 drivers/ata/sata_nv.c           | 42 +++--------------------------------------
 drivers/ata/sata_promise.c      | 14 +-------------
 drivers/ata/sata_qstor.c        | 14 +-------------
 drivers/ata/sata_sil.c          | 16 +---------------
 drivers/ata/sata_sil24.c        | 14 +-------------
 drivers/ata/sata_sis.c          | 16 +---------------
 drivers/ata/sata_svw.c          | 16 +---------------
 drivers/ata/sata_sx4.c          | 14 +-------------
 drivers/ata/sata_uli.c          | 16 +---------------
 drivers/ata/sata_via.c          | 16 +---------------
 drivers/ata/sata_vsc.c          | 16 +---------------
 71 files changed, 76 insertions(+), 1086 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index c6ea44a7f2a9..8862595cb2cf 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -62,7 +62,6 @@ enum {
 	AHCI_MAX_PORTS		= 32,
 	AHCI_MAX_SG		= 168, /* hardware max is 64K */
 	AHCI_DMA_BOUNDARY	= 0xffffffff,
-	AHCI_USE_CLUSTERING	= 1,
 	AHCI_MAX_CMDS		= 32,
 	AHCI_CMD_SZ		= 32,
 	AHCI_CMD_SLOT_SZ	= AHCI_MAX_CMDS * AHCI_CMD_SZ,
@@ -274,22 +273,10 @@ static struct class_device_attribute *ahci_shost_attrs[] = {
 };
 
 static struct scsi_host_template ahci_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.change_queue_depth	= ata_scsi_change_queue_depth,
+	ATA_NCQ_SHT(DRV_NAME),
 	.can_queue		= AHCI_MAX_CMDS - 1,
-	.this_id		= ATA_SHT_THIS_ID,
 	.sg_tablesize		= AHCI_MAX_SG,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= AHCI_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
 	.dma_boundary		= AHCI_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
 	.shost_attrs		= ahci_shost_attrs,
 };
 
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index db4c3cb78fda..5c64ce134c6c 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -95,21 +95,7 @@ static int generic_set_mode(struct ata_link *link, struct ata_device **unused)
 }
 
 static struct scsi_host_template generic_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations generic_port_ops = {
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 067760a16889..9f887b2c92df 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -291,21 +291,7 @@ static struct pci_driver piix_pci_driver = {
 };
 
 static struct scsi_host_template piix_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static const struct ata_port_operations piix_pata_ops = {
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index bdc3b9d7395c..187545c0898a 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -232,22 +232,7 @@ static int pacpi_port_start(struct ata_port *ap)
 }
 
 static struct scsi_host_template pacpi_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	/* Use standard CHS mapping rules */
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static const struct ata_port_operations pacpi_ops = {
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index 84b748aef386..f3d6d9b345ba 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -339,21 +339,7 @@ static int ali_check_atapi_dma(struct ata_queued_cmd *qc)
 }
 
 static struct scsi_host_template ali_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 /*
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 5e1bc13a756b..90d786dfbec3 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -353,21 +353,7 @@ static void nv_host_stop(struct ata_host *host)
 }
 
 static struct scsi_host_template amd_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations amd33_port_ops = {
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index a238c7bd0bba..7bfb7e8bdca2 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -314,21 +314,7 @@ static void artop6260_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 }
 
 static struct scsi_host_template artop_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static const struct ata_port_operations artop6210_ops = {
diff --git a/drivers/ata/pata_at32.c b/drivers/ata/pata_at32.c
index 27c959f35c2c..d7b7b7fde362 100644
--- a/drivers/ata/pata_at32.c
+++ b/drivers/ata/pata_at32.c
@@ -167,21 +167,7 @@ static void pata_at32_set_piomode(struct ata_port *ap, struct ata_device *adev)
 }
 
 static struct scsi_host_template at32_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_PIO_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations at32_port_ops = {
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index 408bdc1a9776..645c47271ff5 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -221,21 +221,8 @@ static void atiixp_bmdma_stop(struct ata_queued_cmd *qc)
 }
 
 static struct scsi_host_template atiixp_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
+	ATA_BMDMA_SHT(DRV_NAME),
 	.sg_tablesize		= LIBATA_DUMB_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
 };
 
 static struct ata_port_operations atiixp_port_ops = {
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index 146c202d5834..6c75fcac3cf4 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -1357,21 +1357,9 @@ static int bfin_port_start(struct ata_port *ap)
 }
 
 static struct scsi_host_template bfin_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
+	ATA_BASE_SHT(DRV_NAME),
 	.sg_tablesize		= SG_NONE,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
 	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
 };
 
 static const struct ata_port_operations bfin_pata_ops = {
diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c
index 0ef1d1ded1f8..26562b814400 100644
--- a/drivers/ata/pata_cmd640.c
+++ b/drivers/ata/pata_cmd640.c
@@ -166,21 +166,7 @@ static int cmd640_port_start(struct ata_port *ap)
 }
 
 static struct scsi_host_template cmd640_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations cmd640_port_ops = {
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index e8c1262341ee..6aea05cc0940 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -266,21 +266,7 @@ static void cmd646r1_bmdma_stop(struct ata_queued_cmd *qc)
 }
 
 static struct scsi_host_template cmd64x_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations cmd64x_port_ops = {
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index 44ad2c9d488f..7e643099a444 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -140,21 +140,8 @@ static void cs5520_set_piomode(struct ata_port *ap, struct ata_device *adev)
 }
 
 static struct scsi_host_template cs5520_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
+	ATA_BMDMA_SHT(DRV_NAME),
 	.sg_tablesize		= LIBATA_DUMB_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
 };
 
 static struct ata_port_operations cs5520_port_ops = {
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index f876aeddf1a1..0bb03dabcf18 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -161,21 +161,8 @@ static unsigned int cs5530_qc_issue_prot(struct ata_queued_cmd *qc)
 }
 
 static struct scsi_host_template cs5530_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_DUMB_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
+	.sg_tablesize	= LIBATA_DUMB_MAX_PRD,
 };
 
 static struct ata_port_operations cs5530_port_ops = {
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index 01324530d052..48a18349c1d8 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -158,21 +158,7 @@ static void cs5535_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 }
 
 static struct scsi_host_template cs5535_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations cs5535_port_ops = {
diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c
index 391aa888f8fd..f02d9107ef3b 100644
--- a/drivers/ata/pata_cs5536.c
+++ b/drivers/ata/pata_cs5536.c
@@ -221,21 +221,7 @@ static void cs5536_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 }
 
 static struct scsi_host_template cs5536_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations cs5536_port_ops = {
diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c
index fc5f9c4e5d87..07fa1ab36315 100644
--- a/drivers/ata/pata_cypress.c
+++ b/drivers/ata/pata_cypress.c
@@ -110,21 +110,7 @@ static void cy82c693_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 }
 
 static struct scsi_host_template cy82c693_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations cy82c693_port_ops = {
diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index dc33220fe5b2..8700d9dcd8c9 100644
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -233,21 +233,7 @@ static void efar_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 }
 
 static struct scsi_host_template efar_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static const struct ata_port_operations efar_ops = {
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index a82089048f58..a30028de41c0 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -290,21 +290,7 @@ static void hpt366_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 }
 
 static struct scsi_host_template hpt36x_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 /*
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 2ddcd07a7518..7d6fac43e2f9 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -619,21 +619,7 @@ static void hpt37x_bmdma_stop(struct ata_queued_cmd *qc)
 
 
 static struct scsi_host_template hpt37x_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 /*
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index 3a517cb9bd3e..aa380c46b168 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -339,21 +339,7 @@ static unsigned int hpt3x2n_qc_issue_prot(struct ata_queued_cmd *qc)
 }
 
 static struct scsi_host_template hpt3x2n_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 /*
diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
index c09f95a4a0d1..9837ab0181e8 100644
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -102,21 +102,7 @@ static int hpt3x3_atapi_dma(struct ata_queued_cmd *qc)
 }
 
 static struct scsi_host_template hpt3x3_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations hpt3x3_port_ops = {
diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c
index e1230cae7ff1..88a1c7ae0a4d 100644
--- a/drivers/ata/pata_icside.c
+++ b/drivers/ata/pata_icside.c
@@ -305,21 +305,9 @@ static int icside_dma_init(struct pata_icside_info *info)
 
 
 static struct scsi_host_template pata_icside_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
+	ATA_BASE_SHT(DRV_NAME),
 	.sg_tablesize		= PATA_ICSIDE_MAX_SG,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
 	.dma_boundary		= ~0, /* no dma boundaries */
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
 };
 
 static void pata_icside_postreset(struct ata_link *link, unsigned int *classes)
diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c
index ef561de0c24d..91ca4d50db04 100644
--- a/drivers/ata/pata_isapnp.c
+++ b/drivers/ata/pata_isapnp.c
@@ -20,21 +20,7 @@
 #define DRV_VERSION "0.2.2"
 
 static struct scsi_host_template isapnp_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_PIO_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations isapnp_port_ops = {
diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c
index 25c49c2e1519..678a05b304d8 100644
--- a/drivers/ata/pata_it8213.c
+++ b/drivers/ata/pata_it8213.c
@@ -243,21 +243,7 @@ static void it8213_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 }
 
 static struct scsi_host_template it8213_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static const struct ata_port_operations it8213_ops = {
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 6bdbb7140dfa..7d969c911731 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -632,21 +632,7 @@ static int it821x_port_start(struct ata_port *ap)
 }
 
 static struct scsi_host_template it821x_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations it821x_smart_port_ops = {
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index 6eb8cc9a3f12..b7e8e825a869 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -88,21 +88,7 @@ static unsigned int ixp4xx_mmio_data_xfer(struct ata_device *dev,
 }
 
 static struct scsi_host_template ixp4xx_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_PIO_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations ixp4xx_port_ops = {
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 7d36fa85435a..69781af7b1bb 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -122,22 +122,7 @@ static void jmicron_error_handler(struct ata_port *ap)
 /* No PIO or DMA methods needed for this device */
 
 static struct scsi_host_template jmicron_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	/* Use standard CHS mapping rules */
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static const struct ata_port_operations jmicron_ops = {
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index 6ac02f7d5289..5329b954c5f2 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -208,21 +208,7 @@ static int legacy_set_mode(struct ata_link *link, struct ata_device **unused)
 }
 
 static struct scsi_host_template legacy_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_PIO_SHT(DRV_NAME),
 };
 
 /*
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index c4ee9b45301f..9de6e429d0d1 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -92,22 +92,7 @@ static void marvell_error_handler(struct ata_port *ap)
 /* No PIO or DMA methods needed for this device */
 
 static struct scsi_host_template marvell_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	/* Use standard CHS mapping rules */
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static const struct ata_port_operations marvell_ops = {
diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c
index fefe71dbed1a..4117b618a9d9 100644
--- a/drivers/ata/pata_mpc52xx.c
+++ b/drivers/ata/pata_mpc52xx.c
@@ -265,21 +265,7 @@ mpc52xx_ata_error_handler(struct ata_port *ap)
 
 
 static struct scsi_host_template mpc52xx_ata_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_PIO_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations mpc52xx_ata_port_ops = {
diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c
index ced6372749b3..e8e6837110b4 100644
--- a/drivers/ata/pata_mpiix.c
+++ b/drivers/ata/pata_mpiix.c
@@ -151,21 +151,7 @@ static unsigned int mpiix_qc_issue_prot(struct ata_queued_cmd *qc)
 }
 
 static struct scsi_host_template mpiix_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_PIO_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations mpiix_port_ops = {
diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c
index 9fd1a84c01d3..11f200a2a156 100644
--- a/drivers/ata/pata_netcell.c
+++ b/drivers/ata/pata_netcell.c
@@ -21,22 +21,7 @@
 /* No PIO or DMA methods needed for this device */
 
 static struct scsi_host_template netcell_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	/* Use standard CHS mapping rules */
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static const struct ata_port_operations netcell_ops = {
diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c
index 15dd649f89ee..ce3b07cab8bc 100644
--- a/drivers/ata/pata_ninja32.c
+++ b/drivers/ata/pata_ninja32.c
@@ -79,21 +79,7 @@ static void ninja32_dev_select(struct ata_port *ap, unsigned int device)
 }
 
 static struct scsi_host_template ninja32_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations ninja32_port_ops = {
diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c
index d182bdf31ee1..d2f85f107d15 100644
--- a/drivers/ata/pata_ns87410.c
+++ b/drivers/ata/pata_ns87410.c
@@ -144,21 +144,7 @@ static unsigned int ns87410_qc_issue_prot(struct ata_queued_cmd *qc)
 }
 
 static struct scsi_host_template ns87410_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_PIO_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations ns87410_port_ops = {
diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c
index 93eb958cb0c9..78d634423cbf 100644
--- a/drivers/ata/pata_ns87415.c
+++ b/drivers/ata/pata_ns87415.c
@@ -366,21 +366,7 @@ static const struct ata_port_operations ns87415_pata_ops = {
 };
 
 static struct scsi_host_template ns87415_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index 44da09ace52c..45f9b3eb5b45 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -220,21 +220,7 @@ static unsigned int oldpiix_qc_issue_prot(struct ata_queued_cmd *qc)
 
 
 static struct scsi_host_template oldpiix_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static const struct ata_port_operations oldpiix_pata_ops = {
diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c
index 1e865f138d1c..1deacfa0be07 100644
--- a/drivers/ata/pata_opti.c
+++ b/drivers/ata/pata_opti.c
@@ -165,21 +165,7 @@ static void opti_set_piomode(struct ata_port *ap, struct ata_device *adev)
 }
 
 static struct scsi_host_template opti_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_PIO_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations opti_port_ops = {
diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index 3f9d03599f23..7495758a86fe 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -350,21 +350,7 @@ static int optidma_set_mode(struct ata_link *link, struct ata_device **r_failed)
 }
 
 static struct scsi_host_template optidma_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations optidma_port_ops = {
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 9881a9e004a4..c05b36c94d51 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -128,21 +128,7 @@ static unsigned int ata_data_xfer_8bit(struct ata_device *dev,
 
 
 static struct scsi_host_template pcmcia_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_PIO_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations pcmcia_port_ops = {
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index 511c89b9bae8..229d9acd934a 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -129,21 +129,7 @@ static struct pci_driver pdc2027x_pci_driver = {
 };
 
 static struct scsi_host_template pdc2027x_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations pdc2027x_pata100_ops = {
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index 3ed866723e0c..564ee0798ec1 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -262,21 +262,7 @@ static int pdc2026x_check_atapi_dma(struct ata_queued_cmd *qc)
 }
 
 static struct scsi_host_template pdc202xx_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations pdc2024x_port_ops = {
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index 602f5562d6fb..cd2d03a4591a 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -47,21 +47,7 @@ static int pata_platform_set_mode(struct ata_link *link, struct ata_device **unu
 }
 
 static struct scsi_host_template pata_platform_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_PIO_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations pata_platform_port_ops = {
diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c
index 60238d5748a7..ccb8682300b8 100644
--- a/drivers/ata/pata_qdi.c
+++ b/drivers/ata/pata_qdi.c
@@ -154,21 +154,7 @@ static unsigned int qdi_data_xfer(struct ata_device *dev, unsigned char *buf,
 }
 
 static struct scsi_host_template qdi_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_PIO_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations qdi6500_port_ops = {
diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index 8109b08fc024..3981bf84d093 100644
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -185,21 +185,7 @@ static unsigned int radisys_qc_issue_prot(struct ata_queued_cmd *qc)
 
 
 static struct scsi_host_template radisys_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static const struct ata_port_operations radisys_pata_ops = {
diff --git a/drivers/ata/pata_rb500_cf.c b/drivers/ata/pata_rb500_cf.c
index 22cb9e1a02f5..4543c980342c 100644
--- a/drivers/ata/pata_rb500_cf.c
+++ b/drivers/ata/pata_rb500_cf.c
@@ -142,22 +142,7 @@ static struct ata_port_operations rb500_pata_port_ops = {
 /* ------------------------------------------------------------------------ */
 
 static struct scsi_host_template rb500_pata_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
-	.proc_name		= DRV_NAME,
-
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
+	ATA_PIO_SHT(DRV_NAME),
 };
 
 /* ------------------------------------------------------------------------ */
diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index 75b252111106..80909a607d36 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -53,21 +53,7 @@ static int rz1000_set_mode(struct ata_link *link, struct ata_device **unused)
 
 
 static struct scsi_host_template rz1000_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_PIO_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations rz1000_port_ops = {
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index 725a8586cd6e..38ce6e12ee3d 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -179,21 +179,8 @@ static unsigned int sc1200_qc_issue_prot(struct ata_queued_cmd *qc)
 }
 
 static struct scsi_host_template sc1200_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_DUMB_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
+	.sg_tablesize	= LIBATA_DUMB_MAX_PRD,
 };
 
 static struct ata_port_operations sc1200_port_ops = {
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index 6c016deeaed8..1833e9ef522e 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -968,21 +968,7 @@ static void scc_port_stop (struct ata_port *ap)
 }
 
 static struct scsi_host_template scc_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static const struct ata_port_operations scc_pata_ops = {
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index 6702df37cfed..318a36988900 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -298,21 +298,7 @@ static void serverworks_set_dmamode(struct ata_port *ap, struct ata_device *adev
 }
 
 static struct scsi_host_template serverworks_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations serverworks_osb4_port_ops = {
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index f4dc09718cab..7812815a34c3 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -192,21 +192,7 @@ static void sil680_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 }
 
 static struct scsi_host_template sil680_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations sil680_port_ops = {
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index abda90f51247..dcd8457a8377 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -514,21 +514,7 @@ static void sis_133_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 }
 
 static struct scsi_host_template sis_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static const struct ata_port_operations sis_133_ops = {
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index 6c37181341ea..ece366bced0c 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -235,21 +235,7 @@ static int sl82c105_qc_defer(struct ata_queued_cmd *qc)
 }
 
 static struct scsi_host_template sl82c105_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations sl82c105_port_ops = {
diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c
index 403eafcffe12..510569957d10 100644
--- a/drivers/ata/pata_triflex.c
+++ b/drivers/ata/pata_triflex.c
@@ -180,21 +180,7 @@ static void triflex_bmdma_stop(struct ata_queued_cmd *qc)
 }
 
 static struct scsi_host_template triflex_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations triflex_port_ops = {
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 24430f70f00e..a7bc860e1310 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -335,21 +335,7 @@ static void via_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 }
 
 static struct scsi_host_template via_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations via_port_ops = {
diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c
index 5318248782bb..9bafae9d5fe0 100644
--- a/drivers/ata/pata_winbond.c
+++ b/drivers/ata/pata_winbond.c
@@ -122,21 +122,7 @@ static unsigned int winbond_data_xfer(struct ata_device *dev,
 }
 
 static struct scsi_host_template winbond_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_PIO_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations winbond_port_ops = {
diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c
index bc2d12a2da30..fdf62de57cfc 100644
--- a/drivers/ata/pdc_adma.c
+++ b/drivers/ata/pdc_adma.c
@@ -143,21 +143,9 @@ static void adma_thaw(struct ata_port *ap);
 static void adma_error_handler(struct ata_port *ap);
 
 static struct scsi_host_template adma_ata_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
-	.proc_name		= DRV_NAME,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
+	ATA_BASE_SHT(DRV_NAME),
 	.sg_tablesize		= LIBATA_MAX_PRD,
 	.dma_boundary		= ADMA_DMA_BOUNDARY,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.use_clustering		= ENABLE_CLUSTERING,
-	.emulated		= ATA_SHT_EMULATED,
 };
 
 static const struct ata_port_operations adma_ata_ops = {
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 8389ecac62cd..f50381b4ba06 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -1191,22 +1191,10 @@ static int sata_fsl_init_controller(struct ata_host *host)
  * scsi mid-layer and libata interface structures
  */
 static struct scsi_host_template sata_fsl_sht = {
-	.module = THIS_MODULE,
-	.name = "sata_fsl",
-	.ioctl = ata_scsi_ioctl,
-	.queuecommand = ata_scsi_queuecmd,
-	.change_queue_depth = ata_scsi_change_queue_depth,
+	ATA_NCQ_SHT("sata_fsl"),
 	.can_queue = SATA_FSL_QUEUE_DEPTH,
-	.this_id = ATA_SHT_THIS_ID,
 	.sg_tablesize = SATA_FSL_MAX_PRD_USABLE,
-	.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
-	.emulated = ATA_SHT_EMULATED,
-	.use_clustering = ATA_SHT_USE_CLUSTERING,
-	.proc_name = "sata_fsl",
 	.dma_boundary = ATA_DMA_BOUNDARY,
-	.slave_configure = ata_scsi_slave_config,
-	.slave_destroy = ata_scsi_slave_destroy,
-	.bios_param = ata_std_bios_param,
 };
 
 static const struct ata_port_operations sata_fsl_ops = {
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index 74f14369dc8d..bb853df865da 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -109,21 +109,7 @@ struct inic_port_priv {
 };
 
 static struct scsi_host_template inic_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static const int scr_map[] = {
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 4685bce745bb..52d41edadb72 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -514,40 +514,16 @@ static int __mv_stop_dma(struct ata_port *ap);
  * PRDs for 64K boundaries in mv_fill_sg().
  */
 static struct scsi_host_template mv5_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
+	ATA_BASE_SHT(DRV_NAME),
 	.sg_tablesize		= MV_MAX_SG_CT / 2,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= 1,
-	.proc_name		= DRV_NAME,
 	.dma_boundary		= MV_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
 };
 
 static struct scsi_host_template mv6_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.change_queue_depth	= ata_scsi_change_queue_depth,
+	ATA_NCQ_SHT(DRV_NAME),
 	.can_queue		= MV_MAX_Q_DEPTH - 1,
-	.this_id		= ATA_SHT_THIS_ID,
 	.sg_tablesize		= MV_MAX_SG_CT / 2,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= 1,
-	.proc_name		= DRV_NAME,
 	.dma_boundary		= MV_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
 };
 
 static const struct ata_port_operations mv5_ops = {
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index bd5b6c35ee5d..9e2b4cef48f2 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -385,59 +385,23 @@ static struct pci_driver nv_pci_driver = {
 };
 
 static struct scsi_host_template nv_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static struct scsi_host_template nv_adma_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.change_queue_depth	= ata_scsi_change_queue_depth,
+	ATA_NCQ_SHT(DRV_NAME),
 	.can_queue		= NV_ADMA_MAX_CPBS,
-	.this_id		= ATA_SHT_THIS_ID,
 	.sg_tablesize		= NV_ADMA_SGTBL_TOTAL_LEN,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
 	.dma_boundary		= NV_ADMA_DMA_BOUNDARY,
 	.slave_configure	= nv_adma_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
 };
 
 static struct scsi_host_template nv_swncq_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.change_queue_depth	= ata_scsi_change_queue_depth,
+	ATA_NCQ_SHT(DRV_NAME),
 	.can_queue		= ATA_MAX_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
 	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
 	.dma_boundary		= ATA_DMA_BOUNDARY,
 	.slave_configure	= nv_swncq_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
 };
 
 static const struct ata_port_operations nv_generic_ops = {
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index 11c1afea2db2..37c32ab3b23b 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -155,21 +155,9 @@ static int pdc_pata_cable_detect(struct ata_port *ap);
 static int pdc_sata_cable_detect(struct ata_port *ap);
 
 static struct scsi_host_template pdc_ata_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
+	ATA_BASE_SHT(DRV_NAME),
 	.sg_tablesize		= PDC_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
 	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
 };
 
 static const struct ata_port_operations pdc_sata_ops = {
diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c
index 3c8e97f251f9..2566d0926aab 100644
--- a/drivers/ata/sata_qstor.c
+++ b/drivers/ata/sata_qstor.c
@@ -126,21 +126,9 @@ static void qs_thaw(struct ata_port *ap);
 static void qs_error_handler(struct ata_port *ap);
 
 static struct scsi_host_template qs_ata_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
+	ATA_BASE_SHT(DRV_NAME),
 	.sg_tablesize		= QS_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ENABLE_CLUSTERING,
-	.proc_name		= DRV_NAME,
 	.dma_boundary		= QS_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
 };
 
 static const struct ata_port_operations qs_ata_ops = {
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 53f0bae3be43..738c1a8ae3b6 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -167,21 +167,7 @@ static struct pci_driver sil_pci_driver = {
 };
 
 static struct scsi_host_template sil_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static const struct ata_port_operations sil_ops = {
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index b85464d51f68..7fa63950d81a 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -384,22 +384,10 @@ static struct pci_driver sil24_pci_driver = {
 };
 
 static struct scsi_host_template sil24_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.change_queue_depth	= ata_scsi_change_queue_depth,
+	ATA_NCQ_SHT(DRV_NAME),
 	.can_queue		= SIL24_MAX_CMDS,
-	.this_id		= ATA_SHT_THIS_ID,
 	.sg_tablesize		= SIL24_MAX_SGE,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
 	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
 };
 
 static const struct ata_port_operations sil24_ops = {
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
index a8adef9786b7..4becb7fde5e7 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -86,21 +86,7 @@ static struct pci_driver sis_pci_driver = {
 };
 
 static struct scsi_host_template sis_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static const struct ata_port_operations sis_ops = {
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index aa690142fa90..c8768396e006 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -327,24 +327,10 @@ static int k2_sata_proc_info(struct Scsi_Host *shost, char *page, char **start,
 
 
 static struct scsi_host_template k2_sata_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
+	ATA_BMDMA_SHT(DRV_NAME),
 #ifdef CONFIG_PPC_OF
 	.proc_info		= k2_sata_proc_info,
 #endif
-	.bios_param		= ata_std_bios_param,
 };
 
 
diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index e3d56bc6726d..1802f92180e4 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -236,21 +236,9 @@ static unsigned int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc);
 
 
 static struct scsi_host_template pdc_sata_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
+	ATA_BASE_SHT(DRV_NAME),
 	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
 	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
 };
 
 static const struct ata_port_operations pdc_20621_ops = {
diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c
index f7fc0450478b..764d7064fa59 100644
--- a/drivers/ata/sata_uli.c
+++ b/drivers/ata/sata_uli.c
@@ -76,21 +76,7 @@ static struct pci_driver uli_pci_driver = {
 };
 
 static struct scsi_host_template uli_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static const struct ata_port_operations uli_ops = {
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index f66ffd7da54e..9be877cb7f57 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -100,21 +100,7 @@ static struct pci_driver svia_pci_driver = {
 };
 
 static struct scsi_host_template svia_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static const struct ata_port_operations vt6420_sata_ops = {
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index 099a2ba4cd4f..fd6855f0bf48 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -300,21 +300,7 @@ out:
 
 
 static struct scsi_host_template vsc_sata_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 
-- 
cgit v1.2.2


From 029cfd6b74fc5c517865fad78cf4a3ea8d9b664a Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Tue, 25 Mar 2008 12:22:49 +0900
Subject: libata: implement and use ops inheritance

libata lets low level drivers build ata_port_operations table and
register it with libata core layer.  This allows low level drivers
high level of flexibility but also burdens them with lots of
boilerplate entries.

This becomes worse for drivers which support related similar
controllers which differ slightly.  They share most of the operations
except for a few.  However, the driver still needs to list all
operations for each variant.  This results in large number of
duplicate entries, which is not only inefficient but also error-prone
as it becomes very difficult to tell what the actual differences are.

This duplicate boilerplates all over the low level drivers also make
updating the core layer exteremely difficult and error-prone.  When
compounded with multi-branched development model, it ends up
accumulating inconsistencies over time.  Some of those inconsistencies
cause immediate problems and fixed.  Others just remain there dormant
making maintenance increasingly difficult.

To rectify the problem, this patch implements ata_port_operations
inheritance.  To allow LLDs to easily re-use their own ops tables
overriding only specific methods, this patch implements poor man's
class inheritance.  An ops table has ->inherits field which can be set
to any ops table as long as it doesn't create a loop.  When the host
is started, the inheritance chain is followed and any operation which
isn't specified is taken from the nearest ancestor which has it
specified.  This operation is called finalization and done only once
per an ops table and the LLD doesn't have to do anything special about
it other than making the ops table non-const such that libata can
update it.

libata provides four base ops tables lower drivers can inherit from -
base, sata, pmp, sff and bmdma.  To avoid overriding these ops
accidentaly, these ops are declared const and LLDs should always
inherit these instead of using them directly.

After finalization, all the ops table are identical before and after
the patch except for setting .irq_handler to ata_interrupt in drivers
which didn't use to.  The .irq_handler doesn't have any actual effect
and the field will soon be removed by later patch.

* sata_sx4 is still using old style EH and currently doesn't take
  advantage of ops inheritance.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/ahci.c              |  94 ++-------------
 drivers/ata/ata_generic.c       |  31 +----
 drivers/ata/ata_piix.c          | 149 +++--------------------
 drivers/ata/libata-core.c       | 113 ++++++++++++++++-
 drivers/ata/pata_acpi.c         |  35 +-----
 drivers/ata/pata_ali.c          | 122 ++-----------------
 drivers/ata/pata_amd.c          | 191 ++++-------------------------
 drivers/ata/pata_artop.c        |  61 +---------
 drivers/ata/pata_at32.c         |  23 +---
 drivers/ata/pata_atiixp.c       |  32 +----
 drivers/ata/pata_bf54x.c        |   4 +-
 drivers/ata/pata_cmd640.c       |  33 +----
 drivers/ata/pata_cmd64x.c       |  96 ++-------------
 drivers/ata/pata_cs5520.c       |  29 +----
 drivers/ata/pata_cs5530.c       |  31 +----
 drivers/ata/pata_cs5535.c       |  31 +----
 drivers/ata/pata_cs5536.c       |  31 +----
 drivers/ata/pata_cypress.c      |  31 +----
 drivers/ata/pata_efar.c         |  30 +----
 drivers/ata/pata_hpt366.c       |  32 +----
 drivers/ata/pata_hpt37x.c       | 122 ++-----------------
 drivers/ata/pata_hpt3x2n.c      |  32 +----
 drivers/ata/pata_hpt3x3.c       |  33 +----
 drivers/ata/pata_icside.c       |  32 ++---
 drivers/ata/pata_isapnp.c       |  21 +---
 drivers/ata/pata_it8213.c       |  31 +----
 drivers/ata/pata_it821x.c       |  57 ++-------
 drivers/ata/pata_ixp4xx_cf.c    |  23 +---
 drivers/ata/pata_jmicron.c      |  31 +----
 drivers/ata/pata_legacy.c       | 260 +++-------------------------------------
 drivers/ata/pata_marvell.c      |  33 +----
 drivers/ata/pata_mpc52xx.c      |  18 +--
 drivers/ata/pata_mpiix.c        |  23 +---
 drivers/ata/pata_netcell.c      |  32 +----
 drivers/ata/pata_ninja32.c      |  30 +----
 drivers/ata/pata_ns87410.c      |  25 +---
 drivers/ata/pata_ns87415.c      |  68 ++---------
 drivers/ata/pata_oldpiix.c      |  31 +----
 drivers/ata/pata_opti.c         |  23 +---
 drivers/ata/pata_optidma.c      |  63 +---------
 drivers/ata/pata_pcmcia.c       |  48 +-------
 drivers/ata/pata_pdc2027x.c     |  56 +--------
 drivers/ata/pata_pdc202xx_old.c |  75 +++---------
 drivers/ata/pata_platform.c     |  24 +---
 drivers/ata/pata_qdi.c          |  47 +-------
 drivers/ata/pata_radisys.c      |  32 +----
 drivers/ata/pata_rb500_cf.c     |  16 +--
 drivers/ata/pata_rz1000.c       |  25 +---
 drivers/ata/pata_sc1200.c       |  33 +----
 drivers/ata/pata_scc.c          |   7 +-
 drivers/ata/pata_serverworks.c  |  63 +---------
 drivers/ata/pata_sil680.c       |  30 +----
 drivers/ata/pata_sis.c          | 177 +++------------------------
 drivers/ata/pata_sl82c105.c     |  34 +-----
 drivers/ata/pata_triflex.c      |  32 +----
 drivers/ata/pata_via.c          |  61 +---------
 drivers/ata/pata_winbond.c      |  25 +---
 drivers/ata/pdc_adma.c          |  19 +--
 drivers/ata/sata_fsl.c          |   5 +-
 drivers/ata/sata_inic162x.c     |  19 +--
 drivers/ata/sata_mv.c           |  66 ++--------
 drivers/ata/sata_nv.c           | 113 +++--------------
 drivers/ata/sata_promise.c      |  62 +++-------
 drivers/ata/sata_qstor.c        |  20 ++--
 drivers/ata/sata_sil.c          |  21 +---
 drivers/ata/sata_sil24.c        |  20 ++--
 drivers/ata/sata_sis.c          |  23 +---
 drivers/ata/sata_svw.c          |  18 +--
 drivers/ata/sata_sx4.c          |   3 +-
 drivers/ata/sata_uli.c          |  28 +----
 drivers/ata/sata_via.c          |  88 ++------------
 drivers/ata/sata_vsc.c          |  19 +--
 72 files changed, 505 insertions(+), 2991 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 8862595cb2cf..dacb3ef0c3e6 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -280,118 +280,46 @@ static struct scsi_host_template ahci_sht = {
 	.shost_attrs		= ahci_shost_attrs,
 };
 
-static const struct ata_port_operations ahci_ops = {
+static struct ata_port_operations ahci_ops = {
+	.inherits		= &sata_pmp_port_ops,
+
 	.check_status		= ahci_check_status,
 	.check_altstatus	= ahci_check_status,
-	.dev_select		= ata_noop_dev_select,
-
-	.dev_config		= ahci_dev_config,
 
 	.tf_read		= ahci_tf_read,
-
 	.qc_defer		= sata_pmp_qc_defer_cmd_switch,
 	.qc_prep		= ahci_qc_prep,
 	.qc_issue		= ahci_qc_issue,
 
-	.irq_clear		= ata_noop_irq_clear,
-
-	.scr_read		= ahci_scr_read,
-	.scr_write		= ahci_scr_write,
-
 	.freeze			= ahci_freeze,
 	.thaw			= ahci_thaw,
-
 	.error_handler		= ahci_error_handler,
 	.post_internal_cmd	= ahci_post_internal_cmd,
-
-	.pmp_attach		= ahci_pmp_attach,
-	.pmp_detach		= ahci_pmp_detach,
-
-#ifdef CONFIG_PM
-	.port_suspend		= ahci_port_suspend,
-	.port_resume		= ahci_port_resume,
-#endif
-	.enable_pm		= ahci_enable_alpm,
-	.disable_pm		= ahci_disable_alpm,
-
-	.port_start		= ahci_port_start,
-	.port_stop		= ahci_port_stop,
-};
-
-static const struct ata_port_operations ahci_vt8251_ops = {
-	.check_status		= ahci_check_status,
-	.check_altstatus	= ahci_check_status,
-	.dev_select		= ata_noop_dev_select,
-
 	.dev_config		= ahci_dev_config,
 
-	.tf_read		= ahci_tf_read,
-
-	.qc_defer		= sata_pmp_qc_defer_cmd_switch,
-	.qc_prep		= ahci_qc_prep,
-	.qc_issue		= ahci_qc_issue,
-
-	.irq_clear		= ata_noop_irq_clear,
-
 	.scr_read		= ahci_scr_read,
 	.scr_write		= ahci_scr_write,
-
-	.freeze			= ahci_freeze,
-	.thaw			= ahci_thaw,
-
-	.error_handler		= ahci_vt8251_error_handler,
-	.post_internal_cmd	= ahci_post_internal_cmd,
-
 	.pmp_attach		= ahci_pmp_attach,
 	.pmp_detach		= ahci_pmp_detach,
 
+	.enable_pm		= ahci_enable_alpm,
+	.disable_pm		= ahci_disable_alpm,
 #ifdef CONFIG_PM
 	.port_suspend		= ahci_port_suspend,
 	.port_resume		= ahci_port_resume,
 #endif
-	.enable_pm		= ahci_enable_alpm,
-	.disable_pm		= ahci_disable_alpm,
-
 	.port_start		= ahci_port_start,
 	.port_stop		= ahci_port_stop,
 };
 
-static const struct ata_port_operations ahci_p5wdh_ops = {
-	.check_status		= ahci_check_status,
-	.check_altstatus	= ahci_check_status,
-	.dev_select		= ata_noop_dev_select,
-
-	.dev_config		= ahci_dev_config,
-
-	.tf_read		= ahci_tf_read,
-
-	.qc_defer		= sata_pmp_qc_defer_cmd_switch,
-	.qc_prep		= ahci_qc_prep,
-	.qc_issue		= ahci_qc_issue,
-
-	.irq_clear		= ata_noop_irq_clear,
-
-	.scr_read		= ahci_scr_read,
-	.scr_write		= ahci_scr_write,
-
-	.freeze			= ahci_freeze,
-	.thaw			= ahci_thaw,
+static struct ata_port_operations ahci_vt8251_ops = {
+	.inherits		= &ahci_ops,
+	.error_handler		= ahci_vt8251_error_handler,
+};
 
+static struct ata_port_operations ahci_p5wdh_ops = {
+	.inherits		= &ahci_ops,
 	.error_handler		= ahci_p5wdh_error_handler,
-	.post_internal_cmd	= ahci_post_internal_cmd,
-
-	.pmp_attach		= ahci_pmp_attach,
-	.pmp_detach		= ahci_pmp_detach,
-
-#ifdef CONFIG_PM
-	.port_suspend		= ahci_port_suspend,
-	.port_resume		= ahci_port_resume,
-#endif
-	.enable_pm		= ahci_enable_alpm,
-	.disable_pm		= ahci_disable_alpm,
-
-	.port_start		= ahci_port_start,
-	.port_stop		= ahci_port_stop,
 };
 
 #define AHCI_HFLAGS(flags)	.private_data	= (void *)(flags)
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index 5c64ce134c6c..0b5b515ae159 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -99,36 +99,9 @@ static struct scsi_host_template generic_sht = {
 };
 
 static struct ata_port_operations generic_port_ops = {
-	.set_mode	= generic_set_mode,
-	.mode_filter	= ata_pci_default_filter,
-
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.bmdma_setup 	= ata_bmdma_setup,
-	.bmdma_start 	= ata_bmdma_start,
-	.bmdma_stop	= ata_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
-	.data_xfer	= ata_data_xfer,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.inherits	= &ata_bmdma_port_ops,
 	.cable_detect	= ata_cable_unknown,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
+	.set_mode	= generic_set_mode,
 };
 
 static int all_generic_ide;		/* Set to claim all devices */
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 9f887b2c92df..bb46b61a7c6b 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -294,155 +294,34 @@ static struct scsi_host_template piix_sht = {
 	ATA_BMDMA_SHT(DRV_NAME),
 };
 
-static const struct ata_port_operations piix_pata_ops = {
+static struct ata_port_operations piix_pata_ops = {
+	.inherits		= &ata_bmdma_port_ops,
+	.cable_detect		= ata_cable_40wire,
 	.set_piomode		= piix_set_piomode,
 	.set_dmamode		= piix_set_dmamode,
-	.mode_filter		= ata_pci_default_filter,
-
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
-
-	.bmdma_setup		= ata_bmdma_setup,
-	.bmdma_start		= ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_data_xfer,
-
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
 	.error_handler		= piix_pata_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-	.cable_detect		= ata_cable_40wire,
-
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
+};
 
-	.port_start		= ata_sff_port_start,
+static struct ata_port_operations piix_vmw_ops = {
+	.inherits		= &piix_pata_ops,
+	.bmdma_status		= piix_vmw_bmdma_status,
 };
 
-static const struct ata_port_operations ich_pata_ops = {
-	.set_piomode		= piix_set_piomode,
-	.set_dmamode		= ich_set_dmamode,
-	.mode_filter		= ata_pci_default_filter,
-
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
-
-	.bmdma_setup		= ata_bmdma_setup,
-	.bmdma_start		= ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_data_xfer,
-
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
-	.error_handler		= piix_pata_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+static struct ata_port_operations ich_pata_ops = {
+	.inherits		= &piix_pata_ops,
 	.cable_detect		= ich_pata_cable_detect,
-
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
-
-	.port_start		= ata_sff_port_start,
+	.set_dmamode		= ich_set_dmamode,
 };
 
-static const struct ata_port_operations piix_sata_ops = {
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
-
-	.bmdma_setup		= ata_bmdma_setup,
-	.bmdma_start		= ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_data_xfer,
-
-	.mode_filter		= ata_pci_default_filter,
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
-	.error_handler		= ata_bmdma_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
-
-	.port_start		= ata_sff_port_start,
+static struct ata_port_operations piix_sata_ops = {
+	.inherits		= &ata_bmdma_port_ops,
 };
 
-static const struct ata_port_operations piix_vmw_ops = {
-	.set_piomode		= piix_set_piomode,
-	.set_dmamode		= piix_set_dmamode,
-	.mode_filter		= ata_pci_default_filter,
-
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
-
-	.bmdma_setup		= ata_bmdma_setup,
-	.bmdma_start		= ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= piix_vmw_bmdma_status,
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_data_xfer,
-
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
-	.error_handler		= piix_pata_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-	.cable_detect		= ata_cable_40wire,
-
-	.irq_handler		= ata_interrupt,
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
-
-	.port_start		= ata_sff_port_start,
-};
-
-static const struct ata_port_operations piix_sidpr_sata_ops = {
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
-
-	.bmdma_setup		= ata_bmdma_setup,
-	.bmdma_start		= ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_data_xfer,
-
+static struct ata_port_operations piix_sidpr_sata_ops = {
+	.inherits		= &piix_sata_ops,
 	.scr_read		= piix_sidpr_scr_read,
 	.scr_write		= piix_sidpr_scr_write,
-
-	.mode_filter		= ata_pci_default_filter,
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
 	.error_handler		= piix_sidpr_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
-
-	.port_start		= ata_sff_port_start,
 };
 
 static const struct piix_map_db ich5_map_db = {
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 394edf937cf2..32fa9ee397b6 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -74,6 +74,56 @@ const unsigned long sata_deb_timing_normal[]		= {   5,  100, 2000 };
 const unsigned long sata_deb_timing_hotplug[]		= {  25,  500, 2000 };
 const unsigned long sata_deb_timing_long[]		= { 100, 2000, 5000 };
 
+const struct ata_port_operations ata_base_port_ops = {
+	.irq_clear		= ata_noop_irq_clear,
+};
+
+const struct ata_port_operations sata_port_ops = {
+	.inherits		= &ata_base_port_ops,
+
+	.qc_defer		= ata_std_qc_defer,
+	.dev_select		= ata_noop_dev_select,
+};
+
+const struct ata_port_operations sata_pmp_port_ops = {
+	.inherits		= &sata_port_ops,
+};
+
+const struct ata_port_operations ata_sff_port_ops = {
+	.inherits		= &ata_base_port_ops,
+
+	.qc_prep		= ata_qc_prep,
+	.qc_issue		= ata_qc_issue_prot,
+
+	.freeze			= ata_bmdma_freeze,
+	.thaw			= ata_bmdma_thaw,
+	.error_handler		= ata_bmdma_error_handler,
+	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+
+	.dev_select		= ata_std_dev_select,
+	.check_status		= ata_check_status,
+	.tf_load		= ata_tf_load,
+	.tf_read		= ata_tf_read,
+	.exec_command		= ata_exec_command,
+	.data_xfer		= ata_data_xfer,
+	.irq_on			= ata_irq_on,
+
+	.port_start		= ata_sff_port_start,
+	.irq_handler		= ata_interrupt,
+};
+
+const struct ata_port_operations ata_bmdma_port_ops = {
+	.inherits		= &ata_sff_port_ops,
+
+	.mode_filter		= ata_pci_default_filter,
+
+	.bmdma_setup		= ata_bmdma_setup,
+	.bmdma_start		= ata_bmdma_start,
+	.bmdma_stop		= ata_bmdma_stop,
+	.bmdma_status		= ata_bmdma_status,
+	.irq_clear		= ata_bmdma_irq_clear,
+};
+
 static unsigned int ata_dev_init_params(struct ata_device *dev,
 					u16 heads, u16 sectors);
 static unsigned int ata_dev_set_xfermode(struct ata_device *dev);
@@ -6971,6 +7021,56 @@ static void ata_host_stop(struct device *gendev, void *res)
 		host->ops->host_stop(host);
 }
 
+/**
+ *	ata_finalize_port_ops - finalize ata_port_operations
+ *	@ops: ata_port_operations to finalize
+ *
+ *	An ata_port_operations can inherit from another ops and that
+ *	ops can again inherit from another.  This can go on as many
+ *	times as necessary as long as there is no loop in the
+ *	inheritance chain.
+ *
+ *	Ops tables are finalized when the host is started.  NULL or
+ *	unspecified entries are inherited from the closet ancestor
+ *	which has the method and the entry is populated with it.
+ *	After finalization, the ops table directly points to all the
+ *	methods and ->inherits is no longer necessary and cleared.
+ *
+ *	Using ATA_OP_NULL, inheriting ops can force a method to NULL.
+ *
+ *	LOCKING:
+ *	None.
+ */
+static void ata_finalize_port_ops(struct ata_port_operations *ops)
+{
+	static spinlock_t lock = SPIN_LOCK_UNLOCKED;
+	const struct ata_port_operations *cur;
+	void **begin = (void **)ops;
+	void **end = (void **)&ops->inherits;
+	void **pp;
+
+	if (!ops || !ops->inherits)
+		return;
+
+	spin_lock(&lock);
+
+	for (cur = ops->inherits; cur; cur = cur->inherits) {
+		void **inherit = (void **)cur;
+
+		for (pp = begin; pp < end; pp++, inherit++)
+			if (!*pp)
+				*pp = *inherit;
+	}
+
+	for (pp = begin; pp < end; pp++)
+		if (IS_ERR(*pp))
+			*pp = NULL;
+
+	ops->inherits = NULL;
+
+	spin_unlock(&lock);
+}
+
 /**
  *	ata_host_start - start and freeze ports of an ATA host
  *	@host: ATA host to start ports for
@@ -6996,9 +7096,13 @@ int ata_host_start(struct ata_host *host)
 	if (host->flags & ATA_HOST_STARTED)
 		return 0;
 
+	ata_finalize_port_ops(host->ops);
+
 	for (i = 0; i < host->n_ports; i++) {
 		struct ata_port *ap = host->ports[i];
 
+		ata_finalize_port_ops(ap->ops);
+
 		if (!host->ops && !ata_port_is_dummy(ap))
 			host->ops = ap->ops;
 
@@ -7060,7 +7164,7 @@ int ata_host_start(struct ata_host *host)
  */
 /* KILLME - the only user left is ipr */
 void ata_host_init(struct ata_host *host, struct device *dev,
-		   unsigned long flags, const struct ata_port_operations *ops)
+		   unsigned long flags, struct ata_port_operations *ops)
 {
 	spin_lock_init(&host->lock);
 	host->dev = dev;
@@ -7749,7 +7853,7 @@ static unsigned int ata_dummy_qc_issue(struct ata_queued_cmd *qc)
 	return AC_ERR_SYSTEM;
 }
 
-const struct ata_port_operations ata_dummy_port_ops = {
+struct ata_port_operations ata_dummy_port_ops = {
 	.check_status		= ata_dummy_check_status,
 	.check_altstatus	= ata_dummy_check_status,
 	.dev_select		= ata_noop_dev_select,
@@ -7777,6 +7881,11 @@ const struct ata_port_info ata_dummy_port_info = {
 EXPORT_SYMBOL_GPL(sata_deb_timing_normal);
 EXPORT_SYMBOL_GPL(sata_deb_timing_hotplug);
 EXPORT_SYMBOL_GPL(sata_deb_timing_long);
+EXPORT_SYMBOL_GPL(ata_base_port_ops);
+EXPORT_SYMBOL_GPL(sata_port_ops);
+EXPORT_SYMBOL_GPL(sata_pmp_port_ops);
+EXPORT_SYMBOL_GPL(ata_sff_port_ops);
+EXPORT_SYMBOL_GPL(ata_bmdma_port_ops);
 EXPORT_SYMBOL_GPL(ata_dummy_port_ops);
 EXPORT_SYMBOL_GPL(ata_dummy_port_info);
 EXPORT_SYMBOL_GPL(ata_std_bios_param);
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index 187545c0898a..35ad488db6ed 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -235,39 +235,14 @@ static struct scsi_host_template pacpi_sht = {
 	ATA_BMDMA_SHT(DRV_NAME),
 };
 
-static const struct ata_port_operations pacpi_ops = {
+static struct ata_port_operations pacpi_ops = {
+	.inherits		= &ata_bmdma_port_ops,
+	.qc_issue		= pacpi_qc_issue_prot,
+	.cable_detect		= pacpi_cable_detect,
+	.mode_filter		= pacpi_mode_filter,
 	.set_piomode		= pacpi_set_piomode,
 	.set_dmamode		= pacpi_set_dmamode,
-	.mode_filter		= pacpi_mode_filter,
-
-	/* Task file is PCI ATA format, use helpers */
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
-
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
 	.error_handler		= pacpi_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-	.cable_detect		= pacpi_cable_detect,
-
-	/* BMDMA handling is PCI ATA format, use helpers */
-	.bmdma_setup		= ata_bmdma_setup,
-	.bmdma_start		= ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= pacpi_qc_issue_prot,
-	.data_xfer		= ata_data_xfer,
-
-	/* Timeout handling */
-	.irq_handler		= ata_interrupt,
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
-
-	/* Generic PATA PCI ATA helpers */
 	.port_start		= pacpi_port_start,
 };
 
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index f3d6d9b345ba..b00a9cf72c31 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -347,29 +347,15 @@ static struct scsi_host_template ali_sht = {
  */
 
 static struct ata_port_operations ali_early_port_ops = {
-	.set_piomode	= ali_set_piomode,
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.inherits	= &ata_sff_port_ops,
 	.cable_detect	= ata_cable_40wire,
+	.set_piomode	= ali_set_piomode,
+};
 
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_noop_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
+static const struct ata_port_operations ali_dma_base_ops = {
+	.inherits	= &ata_bmdma_port_ops,
+	.set_piomode	= ali_set_piomode,
+	.set_dmamode	= ali_set_dmamode,
 };
 
 /*
@@ -377,115 +363,31 @@ static struct ata_port_operations ali_early_port_ops = {
  *	detect
  */
 static struct ata_port_operations ali_20_port_ops = {
-	.set_piomode	= ali_set_piomode,
-	.set_dmamode	= ali_set_dmamode,
+	.inherits	= &ali_dma_base_ops,
+	.cable_detect	= ata_cable_40wire,
 	.mode_filter	= ali_20_filter,
-
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
 	.check_atapi_dma = ali_check_atapi_dma,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
 	.dev_config	= ali_lock_sectors,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= ata_cable_40wire,
-
-	.bmdma_setup 	= ata_bmdma_setup,
-	.bmdma_start 	= ata_bmdma_start,
-	.bmdma_stop	= ata_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
 };
 
 /*
  *	Port operations for DMA capable ALi with cable detect
  */
 static struct ata_port_operations ali_c2_port_ops = {
-	.set_piomode	= ali_set_piomode,
-	.set_dmamode	= ali_set_dmamode,
-	.mode_filter	= ata_pci_default_filter,
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
+	.inherits	= &ali_dma_base_ops,
 	.check_atapi_dma = ali_check_atapi_dma,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-	.dev_config	= ali_lock_sectors,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
 	.cable_detect	= ali_c2_cable_detect,
-
-	.bmdma_setup 	= ata_bmdma_setup,
-	.bmdma_start 	= ata_bmdma_start,
-	.bmdma_stop	= ata_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
+	.dev_config	= ali_lock_sectors,
 };
 
 /*
  *	Port operations for DMA capable ALi with cable detect and LBA48
  */
 static struct ata_port_operations ali_c5_port_ops = {
-	.set_piomode	= ali_set_piomode,
-	.set_dmamode	= ali_set_dmamode,
-	.mode_filter	= ata_pci_default_filter,
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
+	.inherits	= &ali_dma_base_ops,
 	.check_atapi_dma = ali_check_atapi_dma,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
 	.dev_config	= ali_warn_atapi_dma,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
 	.cable_detect	= ali_c2_cable_detect,
-
-	.bmdma_setup 	= ata_bmdma_setup,
-	.bmdma_start 	= ata_bmdma_start,
-	.bmdma_stop	= ata_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
 };
 
 
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 90d786dfbec3..b0cb4eaf273c 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -356,204 +356,57 @@ static struct scsi_host_template amd_sht = {
 	ATA_BMDMA_SHT(DRV_NAME),
 };
 
+static const struct ata_port_operations amd_base_port_ops = {
+	.inherits	= &ata_bmdma_port_ops,
+	.error_handler	= amd_error_handler,
+};
+
 static struct ata_port_operations amd33_port_ops = {
+	.inherits	= &amd_base_port_ops,
+	.cable_detect	= ata_cable_40wire,
 	.set_piomode	= amd33_set_piomode,
 	.set_dmamode	= amd33_set_dmamode,
-	.mode_filter	= ata_pci_default_filter,
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= amd_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= ata_cable_40wire,
-
-	.bmdma_setup 	= ata_bmdma_setup,
-	.bmdma_start 	= ata_bmdma_start,
-	.bmdma_stop	= ata_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
 };
 
 static struct ata_port_operations amd66_port_ops = {
+	.inherits	= &amd_base_port_ops,
+	.cable_detect	= ata_cable_unknown,
 	.set_piomode	= amd66_set_piomode,
 	.set_dmamode	= amd66_set_dmamode,
-	.mode_filter	= ata_pci_default_filter,
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= amd_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= ata_cable_unknown,
-
-	.bmdma_setup 	= ata_bmdma_setup,
-	.bmdma_start 	= ata_bmdma_start,
-	.bmdma_stop	= ata_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
 };
 
 static struct ata_port_operations amd100_port_ops = {
+	.inherits	= &amd_base_port_ops,
+	.cable_detect	= ata_cable_unknown,
 	.set_piomode	= amd100_set_piomode,
 	.set_dmamode	= amd100_set_dmamode,
-	.mode_filter	= ata_pci_default_filter,
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= amd_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= ata_cable_unknown,
-
-	.bmdma_setup 	= ata_bmdma_setup,
-	.bmdma_start 	= ata_bmdma_start,
-	.bmdma_stop	= ata_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
 };
 
 static struct ata_port_operations amd133_port_ops = {
+	.inherits	= &amd_base_port_ops,
+	.cable_detect	= amd_cable_detect,
 	.set_piomode	= amd133_set_piomode,
 	.set_dmamode	= amd133_set_dmamode,
-	.mode_filter	= ata_pci_default_filter,
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= amd_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= amd_cable_detect,
-
-	.bmdma_setup 	= ata_bmdma_setup,
-	.bmdma_start 	= ata_bmdma_start,
-	.bmdma_stop	= ata_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
+};
 
-	.port_start	= ata_sff_port_start,
+static const struct ata_port_operations nv_base_port_ops = {
+	.inherits	= &ata_bmdma_port_ops,
+	.cable_detect	= ata_cable_ignore,
+	.mode_filter	= nv_mode_filter,
+	.error_handler	= nv_error_handler,
+	.host_stop	= nv_host_stop,
 };
 
 static struct ata_port_operations nv100_port_ops = {
+	.inherits	= &nv_base_port_ops,
 	.set_piomode	= nv100_set_piomode,
 	.set_dmamode	= nv100_set_dmamode,
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= nv_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= ata_cable_ignore,
-	.mode_filter	= nv_mode_filter,
-
-	.bmdma_setup 	= ata_bmdma_setup,
-	.bmdma_start 	= ata_bmdma_start,
-	.bmdma_stop	= ata_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
-	.host_stop	= nv_host_stop,
 };
 
 static struct ata_port_operations nv133_port_ops = {
+	.inherits	= &nv_base_port_ops,
 	.set_piomode	= nv133_set_piomode,
 	.set_dmamode	= nv133_set_dmamode,
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= nv_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= ata_cable_ignore,
-	.mode_filter	= nv_mode_filter,
-
-	.bmdma_setup 	= ata_bmdma_setup,
-	.bmdma_start 	= ata_bmdma_start,
-	.bmdma_stop	= ata_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
-	.host_stop	= nv_host_stop,
 };
 
 static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index 7bfb7e8bdca2..0101e5aef3e0 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -317,69 +317,20 @@ static struct scsi_host_template artop_sht = {
 	ATA_BMDMA_SHT(DRV_NAME),
 };
 
-static const struct ata_port_operations artop6210_ops = {
+static struct ata_port_operations artop6210_ops = {
+	.inherits		= &ata_bmdma_port_ops,
+	.cable_detect		= ata_cable_40wire,
 	.set_piomode		= artop6210_set_piomode,
 	.set_dmamode		= artop6210_set_dmamode,
-	.mode_filter		= ata_pci_default_filter,
-
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
-
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
 	.error_handler		= artop6210_error_handler,
-	.post_internal_cmd 	= ata_bmdma_post_internal_cmd,
-	.cable_detect		= ata_cable_40wire,
-
-	.bmdma_setup		= ata_bmdma_setup,
-	.bmdma_start		= ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-
-	.data_xfer		= ata_data_xfer,
-
-	.irq_handler		= ata_interrupt,
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
-
-	.port_start		= ata_sff_port_start,
 };
 
-static const struct ata_port_operations artop6260_ops = {
+static struct ata_port_operations artop6260_ops = {
+	.inherits		= &ata_bmdma_port_ops,
+	.cable_detect		= artop6260_cable_detect,
 	.set_piomode		= artop6260_set_piomode,
 	.set_dmamode		= artop6260_set_dmamode,
-	.mode_filter		= ata_pci_default_filter,
-
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
-
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
 	.error_handler		= artop6260_error_handler,
-	.post_internal_cmd 	= ata_bmdma_post_internal_cmd,
-	.cable_detect		= artop6260_cable_detect,
-
-	.bmdma_setup		= ata_bmdma_setup,
-	.bmdma_start		= ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_data_xfer,
-
-	.irq_handler		= ata_interrupt,
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
-
-	.port_start		= ata_sff_port_start,
 };
 
 
diff --git a/drivers/ata/pata_at32.c b/drivers/ata/pata_at32.c
index d7b7b7fde362..528315587532 100644
--- a/drivers/ata/pata_at32.c
+++ b/drivers/ata/pata_at32.c
@@ -171,28 +171,9 @@ static struct scsi_host_template at32_sht = {
 };
 
 static struct ata_port_operations at32_port_ops = {
-	.set_piomode		= pata_at32_set_piomode,
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.exec_command		= ata_exec_command,
-	.check_status		= ata_check_status,
-	.dev_select		= ata_std_dev_select,
-
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
-	.error_handler		= ata_bmdma_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.inherits		= &ata_sff_port_ops,
 	.cable_detect		= ata_cable_40wire,
-
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-
-	.data_xfer		= ata_data_xfer,
-
-	.irq_clear		= ata_noop_irq_clear,
-	.irq_on			= ata_irq_on,
-
-	.port_start		= ata_sff_port_start,
+	.set_piomode		= pata_at32_set_piomode,
 };
 
 static int __init pata_at32_init_one(struct device *dev,
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index 645c47271ff5..2655f6a17ad3 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -226,36 +226,16 @@ static struct scsi_host_template atiixp_sht = {
 };
 
 static struct ata_port_operations atiixp_port_ops = {
-	.set_piomode	= atiixp_set_piomode,
-	.set_dmamode	= atiixp_set_dmamode,
-	.mode_filter	= ata_pci_default_filter,
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= atiixp_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= atiixp_cable_detect,
+	.inherits	= &ata_bmdma_port_ops,
 
-	.bmdma_setup 	= ata_bmdma_setup,
+	.qc_prep 	= ata_dumb_qc_prep,
 	.bmdma_start 	= atiixp_bmdma_start,
 	.bmdma_stop	= atiixp_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
-	.qc_prep 	= ata_dumb_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
 
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
+	.cable_detect	= atiixp_cable_detect,
+	.set_piomode	= atiixp_set_piomode,
+	.set_dmamode	= atiixp_set_dmamode,
+	.error_handler	= atiixp_error_handler,
 };
 
 static int atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id)
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index 6c75fcac3cf4..7a22ef483061 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -1363,6 +1363,8 @@ static struct scsi_host_template bfin_sht = {
 };
 
 static const struct ata_port_operations bfin_pata_ops = {
+	.inherits		= &ata_sff_port_ops,
+
 	.set_piomode		= bfin_set_piomode,
 	.set_dmamode		= bfin_set_dmamode,
 
@@ -1380,14 +1382,12 @@ static const struct ata_port_operations bfin_pata_ops = {
 	.data_xfer		= bfin_data_xfer,
 
 	.qc_prep		= ata_noop_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
 
 	.freeze			= bfin_bmdma_freeze,
 	.thaw			= bfin_bmdma_thaw,
 	.error_handler		= bfin_error_handler,
 	.post_internal_cmd	= bfin_bmdma_stop,
 
-	.irq_handler		= ata_interrupt,
 	.irq_clear		= bfin_irq_clear,
 	.irq_on			= bfin_irq_on,
 
diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c
index 26562b814400..061c891c8a66 100644
--- a/drivers/ata/pata_cmd640.c
+++ b/drivers/ata/pata_cmd640.c
@@ -170,35 +170,12 @@ static struct scsi_host_template cmd640_sht = {
 };
 
 static struct ata_port_operations cmd640_port_ops = {
-	.set_piomode	= cmd640_set_piomode,
-	.mode_filter	= ata_pci_default_filter,
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= ata_cable_40wire,
-
-	.bmdma_setup 	= ata_bmdma_setup,
-	.bmdma_start 	= ata_bmdma_start,
-	.bmdma_stop	= ata_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= cmd640_qc_issue_prot,
-
-	/* In theory this is not needed once we kill the prefetcher */
+	.inherits	= &ata_bmdma_port_ops,
+	/* In theory xfer_noirq is not needed once we kill the prefetcher */
 	.data_xfer	= ata_data_xfer_noirq,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
-
+	.qc_issue	= cmd640_qc_issue_prot,
+	.cable_detect	= ata_cable_40wire,
+	.set_piomode	= cmd640_set_piomode,
 	.port_start	= cmd640_port_start,
 };
 
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index 6aea05cc0940..1ac8ecfb97e2 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -269,103 +269,27 @@ static struct scsi_host_template cmd64x_sht = {
 	ATA_BMDMA_SHT(DRV_NAME),
 };
 
-static struct ata_port_operations cmd64x_port_ops = {
+static const struct ata_port_operations cmd64x_base_ops = {
+	.inherits	= &ata_bmdma_port_ops,
 	.set_piomode	= cmd64x_set_piomode,
 	.set_dmamode	= cmd64x_set_dmamode,
-	.mode_filter	= ata_pci_default_filter,
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= ata_cable_40wire,
-
-	.bmdma_setup 	= ata_bmdma_setup,
-	.bmdma_start 	= ata_bmdma_start,
-	.bmdma_stop	= ata_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
 };
 
-static struct ata_port_operations cmd646r1_port_ops = {
-	.set_piomode	= cmd64x_set_piomode,
-	.set_dmamode	= cmd64x_set_dmamode,
-	.mode_filter	= ata_pci_default_filter,
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+static struct ata_port_operations cmd64x_port_ops = {
+	.inherits	= &cmd64x_base_ops,
 	.cable_detect	= ata_cable_40wire,
+};
 
-	.bmdma_setup 	= ata_bmdma_setup,
-	.bmdma_start 	= ata_bmdma_start,
+static struct ata_port_operations cmd646r1_port_ops = {
+	.inherits	= &cmd64x_base_ops,
 	.bmdma_stop	= cmd646r1_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
+	.cable_detect	= ata_cable_40wire,
 };
 
 static struct ata_port_operations cmd648_port_ops = {
-	.set_piomode	= cmd64x_set_piomode,
-	.set_dmamode	= cmd64x_set_dmamode,
-	.mode_filter	= ata_pci_default_filter,
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= cmd648_cable_detect,
-
-	.bmdma_setup 	= ata_bmdma_setup,
-	.bmdma_start 	= ata_bmdma_start,
+	.inherits	= &cmd64x_base_ops,
 	.bmdma_stop	= cmd648_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
+	.cable_detect	= cmd648_cable_detect,
 };
 
 static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index 7e643099a444..46d0ce32ee5a 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -145,34 +145,11 @@ static struct scsi_host_template cs5520_sht = {
 };
 
 static struct ata_port_operations cs5520_port_ops = {
+	.inherits		= &ata_bmdma_port_ops,
+	.qc_prep		= ata_dumb_qc_prep,
+	.cable_detect		= ata_cable_40wire,
 	.set_piomode		= cs5520_set_piomode,
 	.set_dmamode		= cs5520_set_dmamode,
-	.mode_filter		= ata_pci_default_filter,
-
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
-
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
-	.error_handler		= ata_bmdma_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-	.cable_detect		= ata_cable_40wire,
-
-	.bmdma_setup		= ata_bmdma_setup,
-	.bmdma_start		= ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-	.qc_prep		= ata_dumb_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_data_xfer,
-
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
-
-	.port_start		= ata_sff_port_start,
 };
 
 static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index 0bb03dabcf18..e4a16a578cac 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -166,37 +166,14 @@ static struct scsi_host_template cs5530_sht = {
 };
 
 static struct ata_port_operations cs5530_port_ops = {
-	.set_piomode	= cs5530_set_piomode,
-	.set_dmamode	= cs5530_set_dmamode,
-	.mode_filter	= ata_pci_default_filter,
-
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.bmdma_setup 	= ata_bmdma_setup,
-	.bmdma_start 	= ata_bmdma_start,
-	.bmdma_stop	= ata_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= ata_cable_40wire,
+	.inherits	= &ata_bmdma_port_ops,
 
 	.qc_prep 	= ata_dumb_qc_prep,
 	.qc_issue	= cs5530_qc_issue_prot,
 
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
+	.cable_detect	= ata_cable_40wire,
+	.set_piomode	= cs5530_set_piomode,
+	.set_dmamode	= cs5530_set_dmamode,
 };
 
 static const struct dmi_system_id palmax_dmi_table[] = {
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index 48a18349c1d8..f910a8aa7437 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -162,37 +162,10 @@ static struct scsi_host_template cs5535_sht = {
 };
 
 static struct ata_port_operations cs5535_port_ops = {
+	.inherits	= &ata_bmdma_port_ops,
+	.cable_detect	= cs5535_cable_detect,
 	.set_piomode	= cs5535_set_piomode,
 	.set_dmamode	= cs5535_set_dmamode,
-	.mode_filter	= ata_pci_default_filter,
-
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= cs5535_cable_detect,
-
-	.bmdma_setup 	= ata_bmdma_setup,
-	.bmdma_start 	= ata_bmdma_start,
-	.bmdma_stop	= ata_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
 };
 
 /**
diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c
index f02d9107ef3b..075ee6a7be39 100644
--- a/drivers/ata/pata_cs5536.c
+++ b/drivers/ata/pata_cs5536.c
@@ -225,37 +225,10 @@ static struct scsi_host_template cs5536_sht = {
 };
 
 static struct ata_port_operations cs5536_port_ops = {
+	.inherits		= &ata_bmdma_port_ops,
+	.cable_detect		= cs5536_cable_detect,
 	.set_piomode		= cs5536_set_piomode,
 	.set_dmamode		= cs5536_set_dmamode,
-	.mode_filter		= ata_pci_default_filter,
-
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
-
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
-	.error_handler		= ata_bmdma_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-	.cable_detect		= cs5536_cable_detect,
-
-	.bmdma_setup		= ata_bmdma_setup,
-	.bmdma_start		= ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-
-	.data_xfer		= ata_data_xfer,
-
-	.irq_handler		= ata_interrupt,
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
-
-	.port_start		= ata_sff_port_start,
 };
 
 /**
diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c
index 07fa1ab36315..c459553e7d1e 100644
--- a/drivers/ata/pata_cypress.c
+++ b/drivers/ata/pata_cypress.c
@@ -114,37 +114,10 @@ static struct scsi_host_template cy82c693_sht = {
 };
 
 static struct ata_port_operations cy82c693_port_ops = {
+	.inherits	= &ata_bmdma_port_ops,
+	.cable_detect	= ata_cable_40wire,
 	.set_piomode	= cy82c693_set_piomode,
 	.set_dmamode	= cy82c693_set_dmamode,
-	.mode_filter	= ata_pci_default_filter,
-
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= ata_cable_40wire,
-
-	.bmdma_setup 	= ata_bmdma_setup,
-	.bmdma_start 	= ata_bmdma_start,
-	.bmdma_stop	= ata_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
 };
 
 static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index 8700d9dcd8c9..ef62fc642c17 100644
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -236,36 +236,12 @@ static struct scsi_host_template efar_sht = {
 	ATA_BMDMA_SHT(DRV_NAME),
 };
 
-static const struct ata_port_operations efar_ops = {
+static struct ata_port_operations efar_ops = {
+	.inherits		= &ata_bmdma_port_ops,
+	.cable_detect		= efar_cable_detect,
 	.set_piomode		= efar_set_piomode,
 	.set_dmamode		= efar_set_dmamode,
-	.mode_filter		= ata_pci_default_filter,
-
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
-
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
 	.error_handler		= efar_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-	.cable_detect		= efar_cable_detect,
-
-	.bmdma_setup		= ata_bmdma_setup,
-	.bmdma_start		= ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_data_xfer,
-
-	.irq_handler		= ata_interrupt,
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
-
-	.port_start		= ata_sff_port_start,
 };
 
 
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index a30028de41c0..788955f57ff8 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -298,37 +298,11 @@ static struct scsi_host_template hpt36x_sht = {
  */
 
 static struct ata_port_operations hpt366_port_ops = {
+	.inherits	= &ata_bmdma_port_ops,
+	.cable_detect	= hpt36x_cable_detect,
+	.mode_filter	= hpt366_filter,
 	.set_piomode	= hpt366_set_piomode,
 	.set_dmamode	= hpt366_set_dmamode,
-	.mode_filter	= hpt366_filter,
-
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= hpt36x_cable_detect,
-
-	.bmdma_setup 	= ata_bmdma_setup,
-	.bmdma_start 	= ata_bmdma_start,
-	.bmdma_stop	= ata_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
 };
 
 /**
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 7d6fac43e2f9..c42eec70d297 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -627,36 +627,15 @@ static struct scsi_host_template hpt37x_sht = {
  */
 
 static struct ata_port_operations hpt370_port_ops = {
-	.set_piomode	= hpt370_set_piomode,
-	.set_dmamode	= hpt370_set_dmamode,
-	.mode_filter	= hpt370_filter,
-
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= hpt37x_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.inherits	= &ata_bmdma_port_ops,
 
-	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= hpt370_bmdma_start,
 	.bmdma_stop	= hpt370_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
 
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
+	.mode_filter	= hpt370_filter,
+	.set_piomode	= hpt370_set_piomode,
+	.set_dmamode	= hpt370_set_dmamode,
+	.error_handler	= hpt37x_error_handler,
 };
 
 /*
@@ -664,36 +643,8 @@ static struct ata_port_operations hpt370_port_ops = {
  */
 
 static struct ata_port_operations hpt370a_port_ops = {
-	.set_piomode	= hpt370_set_piomode,
-	.set_dmamode	= hpt370_set_dmamode,
+	.inherits	= &hpt370_port_ops,
 	.mode_filter	= hpt370a_filter,
-
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= hpt37x_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-
-	.bmdma_setup 	= ata_bmdma_setup,
-	.bmdma_start 	= hpt370_bmdma_start,
-	.bmdma_stop	= hpt370_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
 };
 
 /*
@@ -702,36 +653,13 @@ static struct ata_port_operations hpt370a_port_ops = {
  */
 
 static struct ata_port_operations hpt372_port_ops = {
-	.set_piomode	= hpt372_set_piomode,
-	.set_dmamode	= hpt372_set_dmamode,
-	.mode_filter	= ata_pci_default_filter,
-
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= hpt37x_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.inherits	= &ata_bmdma_port_ops,
 
-	.bmdma_setup 	= ata_bmdma_setup,
-	.bmdma_start 	= ata_bmdma_start,
 	.bmdma_stop	= hpt37x_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,
 
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
+	.set_piomode	= hpt372_set_piomode,
+	.set_dmamode	= hpt372_set_dmamode,
+	.error_handler	= hpt37x_error_handler,
 };
 
 /*
@@ -740,36 +668,8 @@ static struct ata_port_operations hpt372_port_ops = {
  */
 
 static struct ata_port_operations hpt374_port_ops = {
-	.set_piomode	= hpt372_set_piomode,
-	.set_dmamode	= hpt372_set_dmamode,
-	.mode_filter	= ata_pci_default_filter,
-
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
+	.inherits	= &hpt372_port_ops,
 	.error_handler	= hpt374_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-
-	.bmdma_setup 	= ata_bmdma_setup,
-	.bmdma_start 	= ata_bmdma_start,
-	.bmdma_stop	= hpt37x_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
 };
 
 /**
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index aa380c46b168..b77b1279d757 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -347,37 +347,15 @@ static struct scsi_host_template hpt3x2n_sht = {
  */
 
 static struct ata_port_operations hpt3x2n_port_ops = {
-	.set_piomode	= hpt3x2n_set_piomode,
-	.set_dmamode	= hpt3x2n_set_dmamode,
-	.mode_filter	= ata_pci_default_filter,
+	.inherits	= &ata_bmdma_port_ops,
 
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= hpt3x2n_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= hpt3x2n_cable_detect,
-
-	.bmdma_setup 	= ata_bmdma_setup,
-	.bmdma_start 	= ata_bmdma_start,
 	.bmdma_stop	= hpt3x2n_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
-	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= hpt3x2n_qc_issue_prot,
 
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
+	.cable_detect	= hpt3x2n_cable_detect,
+	.set_piomode	= hpt3x2n_set_piomode,
+	.set_dmamode	= hpt3x2n_set_dmamode,
+	.error_handler	= hpt3x2n_error_handler,
 };
 
 /**
diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
index 9837ab0181e8..8857d029ac2e 100644
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -106,40 +106,13 @@ static struct scsi_host_template hpt3x3_sht = {
 };
 
 static struct ata_port_operations hpt3x3_port_ops = {
+	.inherits	= &ata_bmdma_port_ops,
+	.check_atapi_dma= hpt3x3_atapi_dma,
+	.cable_detect	= ata_cable_40wire,
 	.set_piomode	= hpt3x3_set_piomode,
 #if defined(CONFIG_PATA_HPT3X3_DMA)
 	.set_dmamode	= hpt3x3_set_dmamode,
 #endif
-	.mode_filter	= ata_pci_default_filter,
-
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= ata_cable_40wire,
-
-	.bmdma_setup 	= ata_bmdma_setup,
-	.bmdma_start 	= ata_bmdma_start,
-	.bmdma_stop	= ata_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-	.check_atapi_dma= hpt3x3_atapi_dma,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
 };
 
 /**
diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c
index 88a1c7ae0a4d..ff16b0eaa2c2 100644
--- a/drivers/ata/pata_icside.c
+++ b/drivers/ata/pata_icside.c
@@ -339,35 +339,19 @@ static void pata_icside_error_handler(struct ata_port *ap)
 }
 
 static struct ata_port_operations pata_icside_port_ops = {
-	.set_dmamode		= pata_icside_set_dmamode,
-
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.exec_command		= ata_exec_command,
-	.check_status		= ata_check_status,
-	.dev_select		= ata_std_dev_select,
-
-	.cable_detect		= ata_cable_40wire,
-
-	.bmdma_setup		= pata_icside_bmdma_setup,
-	.bmdma_start		= pata_icside_bmdma_start,
-
-	.data_xfer		= ata_data_xfer_noirq,
-
+	.inherits		= &ata_sff_port_ops,
 	/* no need to build any PRD tables for DMA */
 	.qc_prep		= ata_noop_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
+	.data_xfer		= ata_data_xfer_noirq,
+	.bmdma_setup		= pata_icside_bmdma_setup,
+	.bmdma_start		= pata_icside_bmdma_start,
+	.bmdma_stop		= pata_icside_bmdma_stop,
+	.bmdma_status		= pata_icside_bmdma_status,
 
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
+	.cable_detect		= ata_cable_40wire,
+	.set_dmamode		= pata_icside_set_dmamode,
 	.error_handler		= pata_icside_error_handler,
 	.post_internal_cmd	= pata_icside_bmdma_stop,
-
-	.irq_clear		= ata_noop_irq_clear,
-	.irq_on			= ata_irq_on,
-
-	.bmdma_stop		= pata_icside_bmdma_stop,
-	.bmdma_status		= pata_icside_bmdma_status,
 };
 
 static void __devinit
diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c
index 91ca4d50db04..085913ec6f68 100644
--- a/drivers/ata/pata_isapnp.c
+++ b/drivers/ata/pata_isapnp.c
@@ -24,27 +24,8 @@ static struct scsi_host_template isapnp_sht = {
 };
 
 static struct ata_port_operations isapnp_port_ops = {
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.inherits	= &ata_sff_port_ops,
 	.cable_detect	= ata_cable_40wire,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,
-
-	.irq_clear	= ata_noop_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
 };
 
 /**
diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c
index 678a05b304d8..9ce89522e764 100644
--- a/drivers/ata/pata_it8213.c
+++ b/drivers/ata/pata_it8213.c
@@ -246,36 +246,13 @@ static struct scsi_host_template it8213_sht = {
 	ATA_BMDMA_SHT(DRV_NAME),
 };
 
-static const struct ata_port_operations it8213_ops = {
+
+static struct ata_port_operations it8213_ops = {
+	.inherits		= &ata_bmdma_port_ops,
+	.cable_detect		= it8213_cable_detect,
 	.set_piomode		= it8213_set_piomode,
 	.set_dmamode		= it8213_set_dmamode,
-	.mode_filter		= ata_pci_default_filter,
-
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
-
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
 	.error_handler		= it8213_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-	.cable_detect		= it8213_cable_detect,
-
-	.bmdma_setup		= ata_bmdma_setup,
-	.bmdma_start		= ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_data_xfer,
-
-	.irq_handler		= ata_interrupt,
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
-
-	.port_start		= ata_sff_port_start,
 };
 
 
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 7d969c911731..669d224d30ca 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -636,71 +636,30 @@ static struct scsi_host_template it821x_sht = {
 };
 
 static struct ata_port_operations it821x_smart_port_ops = {
-	.set_mode	= it821x_smart_set_mode,
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.mode_filter	= ata_pci_default_filter,
+	.inherits	= &ata_bmdma_port_ops,
 
-	.check_status 	= ata_check_status,
 	.check_atapi_dma= it821x_check_atapi_dma,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-	.dev_config	= it821x_dev_config,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= it821x_ident_hack,
-
-	.bmdma_setup 	= ata_bmdma_setup,
-	.bmdma_start 	= ata_bmdma_start,
-	.bmdma_stop	= ata_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
-	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= it821x_smart_qc_issue_prot,
 
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
+	.cable_detect	= it821x_ident_hack,
+	.set_mode	= it821x_smart_set_mode,
+	.dev_config	= it821x_dev_config,
 
 	.port_start	= it821x_port_start,
 };
 
 static struct ata_port_operations it821x_passthru_port_ops = {
-	.set_piomode	= it821x_passthru_set_piomode,
-	.set_dmamode	= it821x_passthru_set_dmamode,
-	.mode_filter	= ata_pci_default_filter,
+	.inherits	= &ata_bmdma_port_ops,
 
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
 	.check_atapi_dma= it821x_check_atapi_dma,
 	.dev_select 	= it821x_passthru_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= ata_cable_unknown,
-
-	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= it821x_passthru_bmdma_start,
 	.bmdma_stop	= it821x_passthru_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
-	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= it821x_passthru_qc_issue_prot,
 
-	.data_xfer	= ata_data_xfer,
-
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_handler	= ata_interrupt,
-	.irq_on		= ata_irq_on,
+	.cable_detect	= ata_cable_unknown,
+	.set_piomode	= it821x_passthru_set_piomode,
+	.set_dmamode	= it821x_passthru_set_dmamode,
 
 	.port_start	= it821x_port_start,
 };
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index b7e8e825a869..d02629aa20da 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -92,29 +92,10 @@ static struct scsi_host_template ixp4xx_sht = {
 };
 
 static struct ata_port_operations ixp4xx_port_ops = {
-	.set_mode		= ixp4xx_set_mode,
-
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.exec_command		= ata_exec_command,
-	.check_status 		= ata_check_status,
-	.dev_select 		= ata_std_dev_select,
-
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
-	.error_handler		= ata_bmdma_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-
-	.qc_prep 		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
+	.inherits		= &ata_sff_port_ops,
 	.data_xfer		= ixp4xx_mmio_data_xfer,
 	.cable_detect		= ata_cable_40wire,
-
-	.irq_handler		= ata_interrupt,
-	.irq_clear		= ata_noop_irq_clear,
-	.irq_on			= ata_irq_on,
-
-	.port_start		= ata_sff_port_start,
+	.set_mode		= ixp4xx_set_mode,
 };
 
 static void ixp4xx_setup_port(struct ata_port *ap,
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 69781af7b1bb..61ff5c6b4568 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -125,36 +125,9 @@ static struct scsi_host_template jmicron_sht = {
 	ATA_BMDMA_SHT(DRV_NAME),
 };
 
-static const struct ata_port_operations jmicron_ops = {
-	/* Task file is PCI ATA format, use helpers */
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
-
-	.mode_filter		= ata_pci_default_filter,
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
+static struct ata_port_operations jmicron_ops = {
+	.inherits		= &ata_bmdma_port_ops,
 	.error_handler		= jmicron_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-
-	/* BMDMA handling is PCI ATA format, use helpers */
-	.bmdma_setup		= ata_bmdma_setup,
-	.bmdma_start		= ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_data_xfer,
-
-	/* IRQ-related hooks */
-	.irq_handler		= ata_interrupt,
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
-
-	/* Generic PATA PCI ATA helpers */
-	.port_start		= ata_sff_port_start,
 };
 
 
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index 5329b954c5f2..2474068596f4 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -211,6 +211,11 @@ static struct scsi_host_template legacy_sht = {
 	ATA_PIO_SHT(DRV_NAME),
 };
 
+static const struct ata_port_operations legacy_base_port_ops = {
+	.inherits	= &ata_sff_port_ops,
+	.cable_detect	= ata_cable_40wire,
+};
+
 /*
  *	These ops are used if the user indicates the hardware
  *	snoops the commands to decide on the mode and handles the
@@ -220,55 +225,14 @@ static struct scsi_host_template legacy_sht = {
  */
 
 static struct ata_port_operations simple_port_ops = {
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= ata_cable_40wire,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
+	.inherits	= &legacy_base_port_ops,
 	.data_xfer	= ata_data_xfer_noirq,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_noop_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
 };
 
 static struct ata_port_operations legacy_port_ops = {
-	.set_mode	= legacy_set_mode,
-
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-	.cable_detect	= ata_cable_40wire,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
+	.inherits	= &legacy_base_port_ops,
 	.data_xfer	= ata_data_xfer_noirq,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_noop_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
+	.set_mode	= legacy_set_mode,
 };
 
 /*
@@ -359,30 +323,9 @@ static unsigned int pdc_data_xfer_vlb(struct ata_device *dev,
 }
 
 static struct ata_port_operations pdc20230_port_ops = {
+	.inherits	= &legacy_base_port_ops,
 	.set_piomode	= pdc20230_set_piomode,
-
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= ata_cable_40wire,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
 	.data_xfer	= pdc_data_xfer_vlb,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_noop_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
 };
 
 /*
@@ -413,30 +356,8 @@ static void ht6560a_set_piomode(struct ata_port *ap, struct ata_device *adev)
 }
 
 static struct ata_port_operations ht6560a_port_ops = {
+	.inherits	= &legacy_base_port_ops,
 	.set_piomode	= ht6560a_set_piomode,
-
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= ata_cable_40wire,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,	/* Check vlb/noirq */
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_noop_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
 };
 
 /*
@@ -478,30 +399,8 @@ static void ht6560b_set_piomode(struct ata_port *ap, struct ata_device *adev)
 }
 
 static struct ata_port_operations ht6560b_port_ops = {
+	.inherits	= &legacy_base_port_ops,
 	.set_piomode	= ht6560b_set_piomode,
-
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= ata_cable_40wire,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,    /* FIXME: Check 32bit and noirq */
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_noop_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
 };
 
 /*
@@ -599,30 +498,8 @@ static void opti82c611a_set_piomode(struct ata_port *ap,
 
 
 static struct ata_port_operations opti82c611a_port_ops = {
+	.inherits	= &legacy_base_port_ops,
 	.set_piomode	= opti82c611a_set_piomode,
-
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= ata_cable_40wire,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_noop_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
 };
 
 /*
@@ -731,30 +608,9 @@ static unsigned int opti82c46x_qc_issue_prot(struct ata_queued_cmd *qc)
 }
 
 static struct ata_port_operations opti82c46x_port_ops = {
+	.inherits	= &legacy_base_port_ops,
 	.set_piomode	= opti82c46x_set_piomode,
-
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= ata_cable_40wire,
-
-	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= opti82c46x_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_noop_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
 };
 
 static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev)
@@ -916,84 +772,22 @@ static int qdi_port(struct platform_device *dev,
 }
 
 static struct ata_port_operations qdi6500_port_ops = {
+	.inherits	= &legacy_base_port_ops,
 	.set_piomode	= qdi6500_set_piomode,
-
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= ata_cable_40wire,
-
-	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= qdi_qc_issue_prot,
-
 	.data_xfer	= vlb32_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_noop_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
 };
 
 static struct ata_port_operations qdi6580_port_ops = {
+	.inherits	= &legacy_base_port_ops,
 	.set_piomode	= qdi6580_set_piomode,
-
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= ata_cable_40wire,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
 	.data_xfer	= vlb32_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_noop_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
 };
 
 static struct ata_port_operations qdi6580dp_port_ops = {
+	.inherits	= &legacy_base_port_ops,
 	.set_piomode	= qdi6580dp_set_piomode,
-
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= ata_cable_40wire,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= qdi_qc_issue_prot,
-
 	.data_xfer	= vlb32_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_noop_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
 };
 
 static DEFINE_SPINLOCK(winbond_lock);
@@ -1062,29 +856,9 @@ static int winbond_port(struct platform_device *dev,
 }
 
 static struct ata_port_operations winbond_port_ops = {
+	.inherits	= &legacy_base_port_ops,
 	.set_piomode	= winbond_set_piomode,
-
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= ata_cable_40wire,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
 	.data_xfer	= vlb32_data_xfer,
-
-	.irq_clear	= ata_noop_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
 };
 
 static struct legacy_controller controllers[] = {
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index 9de6e429d0d1..286310fc5910 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -95,37 +95,10 @@ static struct scsi_host_template marvell_sht = {
 	ATA_BMDMA_SHT(DRV_NAME),
 };
 
-static const struct ata_port_operations marvell_ops = {
-	/* Task file is PCI ATA format, use helpers */
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
-
-	.mode_filter		= ata_pci_default_filter,
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
-	.error_handler		= marvell_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+static struct ata_port_operations marvell_ops = {
+	.inherits		= &ata_bmdma_port_ops,
 	.cable_detect		= marvell_cable_detect,
-
-	/* BMDMA handling is PCI ATA format, use helpers */
-	.bmdma_setup		= ata_bmdma_setup,
-	.bmdma_start		= ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_data_xfer,
-
-	/* Timeout handling */
-	.irq_handler		= ata_interrupt,
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
-
-	/* Generic PATA PCI ATA helpers */
-	.port_start		= ata_sff_port_start,
+	.error_handler		= marvell_error_handler,
 };
 
 
diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c
index 4117b618a9d9..ac7c0822b1a7 100644
--- a/drivers/ata/pata_mpc52xx.c
+++ b/drivers/ata/pata_mpc52xx.c
@@ -269,22 +269,12 @@ static struct scsi_host_template mpc52xx_ata_sht = {
 };
 
 static struct ata_port_operations mpc52xx_ata_port_ops = {
-	.set_piomode		= mpc52xx_ata_set_piomode,
+	.inherits		= &ata_sff_port_ops,
 	.dev_select		= mpc52xx_ata_dev_select,
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
-	.error_handler		= mpc52xx_ata_error_handler,
 	.cable_detect		= ata_cable_40wire,
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_data_xfer,
-	.irq_clear		= ata_noop_irq_clear,
-	.irq_on			= ata_irq_on,
-	.port_start		= ata_sff_port_start,
+	.set_piomode		= mpc52xx_ata_set_piomode,
+	.error_handler		= mpc52xx_ata_error_handler,
+	.post_internal_cmd	= ATA_OP_NULL,
 };
 
 static int __devinit
diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c
index e8e6837110b4..dab54f8a272d 100644
--- a/drivers/ata/pata_mpiix.c
+++ b/drivers/ata/pata_mpiix.c
@@ -155,28 +155,11 @@ static struct scsi_host_template mpiix_sht = {
 };
 
 static struct ata_port_operations mpiix_port_ops = {
+	.inherits	= &ata_sff_port_ops,
+	.qc_issue	= mpiix_qc_issue_prot,
+	.cable_detect	= ata_cable_40wire,
 	.set_piomode	= mpiix_set_piomode,
-
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
 	.error_handler	= mpiix_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= ata_cable_40wire,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= mpiix_qc_issue_prot,
-	.data_xfer	= ata_data_xfer,
-
-	.irq_clear	= ata_noop_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
 };
 
 static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c
index 11f200a2a156..65389d1837b3 100644
--- a/drivers/ata/pata_netcell.c
+++ b/drivers/ata/pata_netcell.c
@@ -24,37 +24,9 @@ static struct scsi_host_template netcell_sht = {
 	ATA_BMDMA_SHT(DRV_NAME),
 };
 
-static const struct ata_port_operations netcell_ops = {
-	/* Task file is PCI ATA format, use helpers */
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
-
-	.mode_filter		= ata_pci_default_filter,
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
-	.error_handler		= ata_bmdma_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+static struct ata_port_operations netcell_ops = {
+	.inherits	= &ata_bmdma_port_ops,
 	.cable_detect		= ata_cable_80wire,
-
-	/* BMDMA handling is PCI ATA format, use helpers */
-	.bmdma_setup		= ata_bmdma_setup,
-	.bmdma_start		= ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_data_xfer,
-
-	/* IRQ-related hooks */
-	.irq_handler		= ata_interrupt,
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
-
-	/* Generic PATA PCI ATA helpers */
-	.port_start		= ata_sff_port_start,
 };
 
 
diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c
index ce3b07cab8bc..8213d081f313 100644
--- a/drivers/ata/pata_ninja32.c
+++ b/drivers/ata/pata_ninja32.c
@@ -83,36 +83,10 @@ static struct scsi_host_template ninja32_sht = {
 };
 
 static struct ata_port_operations ninja32_port_ops = {
-	.set_piomode	= ninja32_set_piomode,
-	.mode_filter	= ata_pci_default_filter,
-
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
+	.inherits	= &ata_bmdma_port_ops,
 	.dev_select 	= ninja32_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
 	.cable_detect	= ata_cable_40wire,
-
-	.bmdma_setup 	= ata_bmdma_setup,
-	.bmdma_start 	= ata_bmdma_start,
-	.bmdma_stop	= ata_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
+	.set_piomode	= ninja32_set_piomode,
 };
 
 static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id)
diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c
index d2f85f107d15..5b1982fa0be1 100644
--- a/drivers/ata/pata_ns87410.c
+++ b/drivers/ata/pata_ns87410.c
@@ -148,30 +148,11 @@ static struct scsi_host_template ns87410_sht = {
 };
 
 static struct ata_port_operations ns87410_port_ops = {
+	.inherits	= &ata_sff_port_ops,
+	.qc_issue	= ns87410_qc_issue_prot,
+	.cable_detect	= ata_cable_40wire,
 	.set_piomode	= ns87410_set_piomode,
-
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
 	.error_handler	= ns87410_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= ata_cable_40wire,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ns87410_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_noop_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
 };
 
 static int ns87410_init_one(struct pci_dev *dev, const struct pci_device_id *id)
diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c
index 78d634423cbf..38d86a262dbb 100644
--- a/drivers/ata/pata_ns87415.c
+++ b/drivers/ata/pata_ns87415.c
@@ -297,73 +297,29 @@ static u8 ns87560_bmdma_status(struct ata_port *ap)
 {
 	return ns87560_read_buggy(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
 }
+#endif		/* 87560 SuperIO Support */
 
-static const struct ata_port_operations ns87560_pata_ops = {
-	.set_piomode		= ns87415_set_piomode,
-	.mode_filter		= ata_pci_default_filter,
+static struct ata_port_operations ns87415_pata_ops = {
+	.inherits		= &ata_bmdma_port_ops,
 
-	.tf_load		= ata_tf_load,
-	.tf_read		= ns87560_tf_read,
-	.check_status		= ns87560_check_status,
 	.check_atapi_dma	= ns87415_check_atapi_dma,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
-
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
-	.error_handler		= ata_bmdma_error_handler,
-	.post_internal_cmd 	= ata_bmdma_post_internal_cmd,
-	.cable_detect		= ata_cable_40wire,
-
 	.bmdma_setup		= ns87415_bmdma_setup,
 	.bmdma_start		= ns87415_bmdma_start,
 	.bmdma_stop		= ns87415_bmdma_stop,
-	.bmdma_status		= ns87560_bmdma_status,
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_data_xfer,
-
-	.irq_handler		= ata_interrupt,
 	.irq_clear		= ns87415_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
-
-	.port_start		= ata_sff_port_start,
-};
-
-#endif		/* 87560 SuperIO Support */
-
-
-static const struct ata_port_operations ns87415_pata_ops = {
-	.set_piomode		= ns87415_set_piomode,
-	.mode_filter		= ata_pci_default_filter,
 
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.check_atapi_dma	= ns87415_check_atapi_dma,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
-
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
-	.error_handler		= ata_bmdma_error_handler,
-	.post_internal_cmd 	= ata_bmdma_post_internal_cmd,
 	.cable_detect		= ata_cable_40wire,
+	.set_piomode		= ns87415_set_piomode,
+};
 
-	.bmdma_setup		= ns87415_bmdma_setup,
-	.bmdma_start		= ns87415_bmdma_start,
-	.bmdma_stop		= ns87415_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_data_xfer,
-
-	.irq_handler		= ata_interrupt,
-	.irq_clear		= ns87415_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
-
-	.port_start		= ata_sff_port_start,
+#if defined(CONFIG_SUPERIO)
+static struct ata_port_operations ns87560_pata_ops = {
+	.inherits		= &ns87415_pata_ops,
+	.tf_read		= ns87560_tf_read,
+	.check_status		= ns87560_check_status,
+	.bmdma_status		= ns87560_bmdma_status,
 };
+#endif
 
 static struct scsi_host_template ns87415_sht = {
 	ATA_BMDMA_SHT(DRV_NAME),
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index 45f9b3eb5b45..f6062b37310d 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -223,36 +223,13 @@ static struct scsi_host_template oldpiix_sht = {
 	ATA_BMDMA_SHT(DRV_NAME),
 };
 
-static const struct ata_port_operations oldpiix_pata_ops = {
+static struct ata_port_operations oldpiix_pata_ops = {
+	.inherits		= &ata_bmdma_port_ops,
+	.qc_issue		= oldpiix_qc_issue_prot,
+	.cable_detect		= ata_cable_40wire,
 	.set_piomode		= oldpiix_set_piomode,
 	.set_dmamode		= oldpiix_set_dmamode,
-	.mode_filter		= ata_pci_default_filter,
-
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
-
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
 	.error_handler		= oldpiix_pata_error_handler,
-	.post_internal_cmd 	= ata_bmdma_post_internal_cmd,
-	.cable_detect		= ata_cable_40wire,
-
-	.bmdma_setup		= ata_bmdma_setup,
-	.bmdma_start		= ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= oldpiix_qc_issue_prot,
-	.data_xfer		= ata_data_xfer,
-
-	.irq_handler		= ata_interrupt,
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
-
-	.port_start		= ata_sff_port_start,
 };
 
 
diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c
index 1deacfa0be07..c4a0795c3ff4 100644
--- a/drivers/ata/pata_opti.c
+++ b/drivers/ata/pata_opti.c
@@ -169,29 +169,10 @@ static struct scsi_host_template opti_sht = {
 };
 
 static struct ata_port_operations opti_port_ops = {
+	.inherits	= &ata_sff_port_ops,
+	.cable_detect	= ata_cable_40wire,
 	.set_piomode	= opti_set_piomode,
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
 	.error_handler	= opti_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= ata_cable_40wire,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_noop_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
 };
 
 static int opti_init_one(struct pci_dev *dev, const struct pci_device_id *id)
diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index 7495758a86fe..eb4b08190e3a 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -354,73 +354,18 @@ static struct scsi_host_template optidma_sht = {
 };
 
 static struct ata_port_operations optidma_port_ops = {
+	.inherits	= &ata_bmdma_port_ops,
+	.cable_detect	= ata_cable_40wire,
 	.set_piomode	= optidma_set_pio_mode,
 	.set_dmamode	= optidma_set_dma_mode,
-	.mode_filter	= ata_pci_default_filter,
-
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.error_handler	= optidma_error_handler,
 	.set_mode	= optidma_set_mode,
-	.cable_detect	= ata_cable_40wire,
-
-	.bmdma_setup 	= ata_bmdma_setup,
-	.bmdma_start 	= ata_bmdma_start,
-	.bmdma_stop	= ata_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
+	.error_handler	= optidma_error_handler,
 };
 
 static struct ata_port_operations optiplus_port_ops = {
+	.inherits	= &optidma_port_ops,
 	.set_piomode	= optiplus_set_pio_mode,
 	.set_dmamode	= optiplus_set_dma_mode,
-	.mode_filter	= ata_pci_default_filter,
-
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.error_handler	= optidma_error_handler,
-	.set_mode	= optidma_set_mode,
-	.cable_detect	= ata_cable_40wire,
-
-	.bmdma_setup 	= ata_bmdma_setup,
-	.bmdma_start 	= ata_bmdma_start,
-	.bmdma_stop	= ata_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
 };
 
 /**
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index c05b36c94d51..57efbf05c95f 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -132,53 +132,17 @@ static struct scsi_host_template pcmcia_sht = {
 };
 
 static struct ata_port_operations pcmcia_port_ops = {
-	.set_mode	= pcmcia_set_mode,
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= ata_cable_40wire,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
+	.inherits	= &ata_sff_port_ops,
 	.data_xfer	= ata_data_xfer_noirq,
-
-	.irq_clear	= ata_noop_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
+	.cable_detect	= ata_cable_40wire,
+	.set_mode	= pcmcia_set_mode,
 };
 
 static struct ata_port_operations pcmcia_8bit_port_ops = {
-	.set_mode	= pcmcia_set_mode_8bit,
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= ata_cable_40wire,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
+	.inherits	= &ata_sff_port_ops,
 	.data_xfer	= ata_data_xfer_8bit,
-
-	.irq_clear	= ata_noop_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
+	.cable_detect	= ata_cable_40wire,
+	.set_mode	= pcmcia_set_mode_8bit,
 };
 
 #define CS_CHECK(fn, ret) \
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index 229d9acd934a..f619c20dd192 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -133,66 +133,18 @@ static struct scsi_host_template pdc2027x_sht = {
 };
 
 static struct ata_port_operations pdc2027x_pata100_ops = {
-	.mode_filter		= ata_pci_default_filter,
-
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
-
+	.inherits		= &ata_bmdma_port_ops,
 	.check_atapi_dma	= pdc2027x_check_atapi_dma,
-	.bmdma_setup		= ata_bmdma_setup,
-	.bmdma_start		= ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_data_xfer,
-
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
-	.error_handler		= pdc2027x_error_handler,
-	.post_internal_cmd 	= ata_bmdma_post_internal_cmd,
 	.cable_detect		= pdc2027x_cable_detect,
-
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
-
-	.port_start		= ata_sff_port_start,
+	.error_handler		= pdc2027x_error_handler,
 };
 
 static struct ata_port_operations pdc2027x_pata133_ops = {
+	.inherits		= &pdc2027x_pata100_ops,
+	.mode_filter		= pdc2027x_mode_filter,
 	.set_piomode		= pdc2027x_set_piomode,
 	.set_dmamode		= pdc2027x_set_dmamode,
 	.set_mode		= pdc2027x_set_mode,
-	.mode_filter		= pdc2027x_mode_filter,
-
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
-
-	.check_atapi_dma	= pdc2027x_check_atapi_dma,
-	.bmdma_setup		= ata_bmdma_setup,
-	.bmdma_start		= ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_data_xfer,
-
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
-	.error_handler		= pdc2027x_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-	.cable_detect		= pdc2027x_cable_detect,
-
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
-
-	.port_start		= ata_sff_port_start,
 };
 
 static struct ata_port_info pdc2027x_port_info[] = {
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index 564ee0798ec1..4daac20df0bc 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -266,69 +266,24 @@ static struct scsi_host_template pdc202xx_sht = {
 };
 
 static struct ata_port_operations pdc2024x_port_ops = {
-	.set_piomode	= pdc202xx_set_piomode,
-	.set_dmamode	= pdc202xx_set_dmamode,
-	.mode_filter	= ata_pci_default_filter,
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= ata_cable_40wire,
-
-	.bmdma_setup 	= ata_bmdma_setup,
-	.bmdma_start 	= ata_bmdma_start,
-	.bmdma_stop	= ata_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
+	.inherits		= &ata_bmdma_port_ops,
+
+	.cable_detect		= ata_cable_40wire,
+	.set_piomode		= pdc202xx_set_piomode,
+	.set_dmamode		= pdc202xx_set_dmamode,
 };
 
 static struct ata_port_operations pdc2026x_port_ops = {
-	.set_piomode	= pdc202xx_set_piomode,
-	.set_dmamode	= pdc202xx_set_dmamode,
-	.mode_filter	= ata_pci_default_filter,
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-	.dev_config	= pdc2026x_dev_config,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= pdc2026x_cable_detect,
-
-	.check_atapi_dma= pdc2026x_check_atapi_dma,
-	.bmdma_setup 	= ata_bmdma_setup,
-	.bmdma_start 	= pdc2026x_bmdma_start,
-	.bmdma_stop	= pdc2026x_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= pdc2026x_port_start,
+	.inherits		= &pdc2024x_port_ops,
+
+	.check_atapi_dma	= pdc2026x_check_atapi_dma,
+	.bmdma_start		= pdc2026x_bmdma_start,
+	.bmdma_stop		= pdc2026x_bmdma_stop,
+
+	.cable_detect		= pdc2026x_cable_detect,
+	.dev_config		= pdc2026x_dev_config,
+
+	.port_start		= pdc2026x_port_start,
 };
 
 static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id)
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index cd2d03a4591a..0588c9b7e73e 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -51,27 +51,11 @@ static struct scsi_host_template pata_platform_sht = {
 };
 
 static struct ata_port_operations pata_platform_port_ops = {
-	.set_mode		= pata_platform_set_mode,
-
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
-
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
-	.error_handler		= ata_bmdma_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-	.cable_detect		= ata_cable_unknown,
-
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-
+	.inherits		= &ata_sff_port_ops,
 	.data_xfer		= ata_data_xfer_noirq,
-
-	.irq_clear		= ata_noop_irq_clear,
-	.irq_on			= ata_irq_on,
+	.cable_detect		= ata_cable_unknown,
+	.set_mode		= pata_platform_set_mode,
+	.port_start		= ATA_OP_NULL,
 };
 
 static void pata_platform_setup_port(struct ata_ioports *ioaddr,
diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c
index ccb8682300b8..d16b343d2a62 100644
--- a/drivers/ata/pata_qdi.c
+++ b/drivers/ata/pata_qdi.c
@@ -158,55 +158,16 @@ static struct scsi_host_template qdi_sht = {
 };
 
 static struct ata_port_operations qdi6500_port_ops = {
-	.set_piomode	= qdi6500_set_piomode,
-
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= ata_cable_40wire,
-
-	.qc_prep 	= ata_qc_prep,
+	.inherits	= &ata_sff_port_ops,
 	.qc_issue	= qdi_qc_issue_prot,
-
 	.data_xfer	= qdi_data_xfer,
-
-	.irq_clear	= ata_noop_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
+	.cable_detect	= ata_cable_40wire,
+	.set_piomode	= qdi6500_set_piomode,
 };
 
 static struct ata_port_operations qdi6580_port_ops = {
+	.inherits	= &qdi6500_port_ops,
 	.set_piomode	= qdi6580_set_piomode,
-
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= ata_cable_40wire,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= qdi_qc_issue_prot,
-
-	.data_xfer	= qdi_data_xfer,
-
-	.irq_clear	= ata_noop_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
 };
 
 /**
diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index 3981bf84d093..94e60b3a1ec6 100644
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -188,36 +188,12 @@ static struct scsi_host_template radisys_sht = {
 	ATA_BMDMA_SHT(DRV_NAME),
 };
 
-static const struct ata_port_operations radisys_pata_ops = {
+static struct ata_port_operations radisys_pata_ops = {
+	.inherits		= &ata_bmdma_port_ops,
+	.qc_issue		= radisys_qc_issue_prot,
+	.cable_detect		= ata_cable_unknown,
 	.set_piomode		= radisys_set_piomode,
 	.set_dmamode		= radisys_set_dmamode,
-	.mode_filter		= ata_pci_default_filter,
-
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
-
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
-	.error_handler		= ata_bmdma_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-	.cable_detect		= ata_cable_unknown,
-
-	.bmdma_setup		= ata_bmdma_setup,
-	.bmdma_start		= ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= radisys_qc_issue_prot,
-	.data_xfer		= ata_data_xfer,
-
-	.irq_handler		= ata_interrupt,
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
-
-	.port_start		= ata_sff_port_start,
 };
 
 
diff --git a/drivers/ata/pata_rb500_cf.c b/drivers/ata/pata_rb500_cf.c
index 4543c980342c..7affceec1c29 100644
--- a/drivers/ata/pata_rb500_cf.c
+++ b/drivers/ata/pata_rb500_cf.c
@@ -118,25 +118,11 @@ static irqreturn_t rb500_pata_irq_handler(int irq, void *dev_instance)
 }
 
 static struct ata_port_operations rb500_pata_port_ops = {
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-
+	.inherits		= &ata_sff_port_ops,
 	.exec_command		= rb500_pata_exec_command,
-	.check_status 		= ata_check_status,
-	.dev_select 		= ata_std_dev_select,
-
 	.data_xfer		= rb500_pata_data_xfer,
-
-	.qc_prep 		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-
 	.freeze			= rb500_pata_freeze,
 	.thaw			= rb500_pata_thaw,
-	.error_handler		= ata_bmdma_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-
-	.irq_clear		= ata_noop_irq_clear,
-	.irq_on			= ata_irq_on,
 };
 
 /* ------------------------------------------------------------------------ */
diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index 80909a607d36..a2aef7328bfc 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -57,30 +57,9 @@ static struct scsi_host_template rz1000_sht = {
 };
 
 static struct ata_port_operations rz1000_port_ops = {
-	.set_mode	= rz1000_set_mode,
-
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.inherits	= &ata_sff_port_ops,
 	.cable_detect	= ata_cable_40wire,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_noop_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
+	.set_mode	= rz1000_set_mode,
 };
 
 static int rz1000_fifo_disable(struct pci_dev *pdev)
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index 38ce6e12ee3d..362b7f829d8e 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -184,37 +184,12 @@ static struct scsi_host_template sc1200_sht = {
 };
 
 static struct ata_port_operations sc1200_port_ops = {
-	.set_piomode	= sc1200_set_piomode,
-	.set_dmamode	= sc1200_set_dmamode,
-	.mode_filter	= ata_pci_default_filter,
-
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= ata_cable_40wire,
-
-	.bmdma_setup 	= ata_bmdma_setup,
-	.bmdma_start 	= ata_bmdma_start,
-	.bmdma_stop	= ata_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
+	.inherits	= &ata_bmdma_port_ops,
 	.qc_prep 	= ata_dumb_qc_prep,
 	.qc_issue	= sc1200_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
+	.cable_detect	= ata_cable_40wire,
+	.set_piomode	= sc1200_set_piomode,
+	.set_dmamode	= sc1200_set_dmamode,
 };
 
 /**
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index 1833e9ef522e..033d1f3a82de 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -972,6 +972,8 @@ static struct scsi_host_template scc_sht = {
 };
 
 static const struct ata_port_operations scc_pata_ops = {
+	.inherits		= &ata_bmdma_port_ops,
+
 	.set_piomode		= scc_set_piomode,
 	.set_dmamode		= scc_set_dmamode,
 	.mode_filter		= scc_mode_filter,
@@ -989,12 +991,7 @@ static const struct ata_port_operations scc_pata_ops = {
 	.bmdma_status		= scc_bmdma_status,
 	.data_xfer		= scc_data_xfer,
 
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-
 	.freeze			= scc_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
-
 	.error_handler		= scc_error_handler,
 	.post_internal_cmd	= scc_bmdma_stop,
 
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index 318a36988900..627abcf85c6e 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -302,71 +302,16 @@ static struct scsi_host_template serverworks_sht = {
 };
 
 static struct ata_port_operations serverworks_osb4_port_ops = {
+	.inherits	= &ata_bmdma_port_ops,
+	.cable_detect	= serverworks_cable_detect,
+	.mode_filter	= serverworks_osb4_filter,
 	.set_piomode	= serverworks_set_piomode,
 	.set_dmamode	= serverworks_set_dmamode,
-	.mode_filter	= serverworks_osb4_filter,
-
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= serverworks_cable_detect,
-
-	.bmdma_setup 	= ata_bmdma_setup,
-	.bmdma_start 	= ata_bmdma_start,
-	.bmdma_stop	= ata_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
 };
 
 static struct ata_port_operations serverworks_csb_port_ops = {
-	.set_piomode	= serverworks_set_piomode,
-	.set_dmamode	= serverworks_set_dmamode,
+	.inherits	= &serverworks_osb4_port_ops,
 	.mode_filter	= serverworks_csb_filter,
-
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= serverworks_cable_detect,
-
-	.bmdma_setup 	= ata_bmdma_setup,
-	.bmdma_start 	= ata_bmdma_start,
-	.bmdma_stop	= ata_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
 };
 
 static int serverworks_fixup_osb4(struct pci_dev *pdev)
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 7812815a34c3..0936f534d9c7 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -196,36 +196,10 @@ static struct scsi_host_template sil680_sht = {
 };
 
 static struct ata_port_operations sil680_port_ops = {
+	.inherits	= &ata_bmdma_port_ops,
+	.cable_detect	= sil680_cable_detect,
 	.set_piomode	= sil680_set_piomode,
 	.set_dmamode	= sil680_set_dmamode,
-	.mode_filter	= ata_pci_default_filter,
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= sil680_cable_detect,
-
-	.bmdma_setup 	= ata_bmdma_setup,
-	.bmdma_start 	= ata_bmdma_start,
-	.bmdma_stop	= ata_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
 };
 
 /**
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index dcd8457a8377..3ed628670cd7 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -517,196 +517,51 @@ static struct scsi_host_template sis_sht = {
 	ATA_BMDMA_SHT(DRV_NAME),
 };
 
-static const struct ata_port_operations sis_133_ops = {
+static struct ata_port_operations sis_133_for_sata_ops = {
+	.inherits		= &ata_bmdma_port_ops,
 	.set_piomode		= sis_133_set_piomode,
 	.set_dmamode		= sis_133_set_dmamode,
-	.mode_filter		= ata_pci_default_filter,
-
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
-
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
-	.error_handler		= sis_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
 	.cable_detect		= sis_133_cable_detect,
+};
 
-	.bmdma_setup		= ata_bmdma_setup,
-	.bmdma_start		= ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_data_xfer,
-
-	.irq_handler		= ata_interrupt,
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
-
-	.port_start		= ata_sff_port_start,
+static struct ata_port_operations sis_base_ops = {
+	.inherits		= &ata_bmdma_port_ops,
+	.error_handler		= sis_error_handler,
 };
 
-static const struct ata_port_operations sis_133_for_sata_ops = {
+static struct ata_port_operations sis_133_ops = {
+	.inherits		= &sis_base_ops,
 	.set_piomode		= sis_133_set_piomode,
 	.set_dmamode		= sis_133_set_dmamode,
-	.mode_filter		= ata_pci_default_filter,
-
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
-
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
-	.error_handler		= ata_bmdma_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
 	.cable_detect		= sis_133_cable_detect,
-
-	.bmdma_setup		= ata_bmdma_setup,
-	.bmdma_start		= ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_data_xfer,
-
-	.irq_handler		= ata_interrupt,
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
-
-	.port_start		= ata_sff_port_start,
 };
 
-static const struct ata_port_operations sis_133_early_ops = {
+static struct ata_port_operations sis_133_early_ops = {
+	.inherits		= &sis_base_ops,
 	.set_piomode		= sis_100_set_piomode,
 	.set_dmamode		= sis_133_early_set_dmamode,
-	.mode_filter		= ata_pci_default_filter,
-
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
-
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
-	.error_handler		= sis_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
 	.cable_detect		= sis_66_cable_detect,
-
-	.bmdma_setup		= ata_bmdma_setup,
-	.bmdma_start		= ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_data_xfer,
-
-	.irq_handler		= ata_interrupt,
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
-
-	.port_start		= ata_sff_port_start,
 };
 
-static const struct ata_port_operations sis_100_ops = {
+static struct ata_port_operations sis_100_ops = {
+	.inherits		= &sis_base_ops,
 	.set_piomode		= sis_100_set_piomode,
 	.set_dmamode		= sis_100_set_dmamode,
-	.mode_filter		= ata_pci_default_filter,
-
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
-
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
-	.error_handler		= sis_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
 	.cable_detect		= sis_66_cable_detect,
-
-	.bmdma_setup		= ata_bmdma_setup,
-	.bmdma_start		= ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_data_xfer,
-
-	.irq_handler		= ata_interrupt,
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
-
-	.port_start		= ata_sff_port_start,
 };
 
-static const struct ata_port_operations sis_66_ops = {
+static struct ata_port_operations sis_66_ops = {
+	.inherits		= &sis_base_ops,
 	.set_piomode		= sis_old_set_piomode,
 	.set_dmamode		= sis_66_set_dmamode,
-	.mode_filter		= ata_pci_default_filter,
-
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
 	.cable_detect		= sis_66_cable_detect,
-
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
-	.error_handler		= sis_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-
-	.bmdma_setup		= ata_bmdma_setup,
-	.bmdma_start		= ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_data_xfer,
-
-	.irq_handler		= ata_interrupt,
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
-
-	.port_start		= ata_sff_port_start,
 };
 
-static const struct ata_port_operations sis_old_ops = {
+static struct ata_port_operations sis_old_ops = {
+	.inherits		= &sis_base_ops,
 	.set_piomode		= sis_old_set_piomode,
 	.set_dmamode		= sis_old_set_dmamode,
-	.mode_filter		= ata_pci_default_filter,
-
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
-
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
-	.error_handler		= sis_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
 	.cable_detect		= ata_cable_40wire,
-
-	.bmdma_setup		= ata_bmdma_setup,
-	.bmdma_start		= ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_data_xfer,
-
-	.irq_handler		= ata_interrupt,
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
-
-	.port_start		= ata_sff_port_start,
 };
 
 static const struct ata_port_info sis_info = {
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index ece366bced0c..0dd8e2f69558 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -239,37 +239,13 @@ static struct scsi_host_template sl82c105_sht = {
 };
 
 static struct ata_port_operations sl82c105_port_ops = {
-	.set_piomode	= sl82c105_set_piomode,
-	.mode_filter	= ata_pci_default_filter,
-
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= sl82c105_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= ata_cable_40wire,
-
-	.bmdma_setup 	= ata_bmdma_setup,
+	.inherits	= &ata_bmdma_port_ops,
+	.qc_defer	= sl82c105_qc_defer,
 	.bmdma_start 	= sl82c105_bmdma_start,
 	.bmdma_stop	= sl82c105_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
-	.qc_defer	= sl82c105_qc_defer,
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
+	.cable_detect	= ata_cable_40wire,
+	.set_piomode	= sl82c105_set_piomode,
+	.error_handler	= sl82c105_error_handler,
 };
 
 /**
diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c
index 510569957d10..bc4956ef0931 100644
--- a/drivers/ata/pata_triflex.c
+++ b/drivers/ata/pata_triflex.c
@@ -184,36 +184,12 @@ static struct scsi_host_template triflex_sht = {
 };
 
 static struct ata_port_operations triflex_port_ops = {
-	.set_piomode	= triflex_set_piomode,
-	.mode_filter	= ata_pci_default_filter,
-
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= triflex_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= ata_cable_40wire,
-
-	.bmdma_setup 	= ata_bmdma_setup,
+	.inherits	= &ata_bmdma_port_ops,
 	.bmdma_start 	= triflex_bmdma_start,
 	.bmdma_stop	= triflex_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
+	.cable_detect	= ata_cable_40wire,
+	.set_piomode	= triflex_set_piomode,
+	.error_handler	= triflex_error_handler,
 };
 
 static int triflex_init_one(struct pci_dev *dev, const struct pci_device_id *id)
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index a7bc860e1310..d1edb1b27480 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -339,71 +339,16 @@ static struct scsi_host_template via_sht = {
 };
 
 static struct ata_port_operations via_port_ops = {
+	.inherits	= &ata_bmdma_port_ops,
+	.cable_detect	= via_cable_detect,
 	.set_piomode	= via_set_piomode,
 	.set_dmamode	= via_set_dmamode,
-	.mode_filter	= ata_pci_default_filter,
-
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
 	.error_handler	= via_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= via_cable_detect,
-
-	.bmdma_setup 	= ata_bmdma_setup,
-	.bmdma_start 	= ata_bmdma_start,
-	.bmdma_stop	= ata_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
 };
 
 static struct ata_port_operations via_port_ops_noirq = {
-	.set_piomode	= via_set_piomode,
-	.set_dmamode	= via_set_dmamode,
-	.mode_filter	= ata_pci_default_filter,
-
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= via_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= via_cable_detect,
-
-	.bmdma_setup 	= ata_bmdma_setup,
-	.bmdma_start 	= ata_bmdma_start,
-	.bmdma_stop	= ata_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
+	.inherits	= &via_port_ops,
 	.data_xfer	= ata_data_xfer_noirq,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
 };
 
 /**
diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c
index 9bafae9d5fe0..f235bb0d6139 100644
--- a/drivers/ata/pata_winbond.c
+++ b/drivers/ata/pata_winbond.c
@@ -126,29 +126,10 @@ static struct scsi_host_template winbond_sht = {
 };
 
 static struct ata_port_operations winbond_port_ops = {
-	.set_piomode	= winbond_set_piomode,
-
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= ata_cable_40wire,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
+	.inherits	= &ata_sff_port_ops,
 	.data_xfer	= winbond_data_xfer,
-
-	.irq_clear	= ata_noop_irq_clear,
-	.irq_on		= ata_irq_on,
-
-	.port_start	= ata_sff_port_start,
+	.cable_detect	= ata_cable_40wire,
+	.set_piomode	= winbond_set_piomode,
 };
 
 /**
diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c
index fdf62de57cfc..a5706149af6b 100644
--- a/drivers/ata/pdc_adma.c
+++ b/drivers/ata/pdc_adma.c
@@ -148,26 +148,29 @@ static struct scsi_host_template adma_ata_sht = {
 	.dma_boundary		= ADMA_DMA_BOUNDARY,
 };
 
-static const struct ata_port_operations adma_ata_ops = {
+static struct ata_port_operations adma_ata_ops = {
+	.inherits		= &ata_base_port_ops,
+
+	.dev_select		= ata_std_dev_select,
 	.tf_load		= ata_tf_load,
 	.tf_read		= ata_tf_read,
-	.exec_command		= ata_exec_command,
 	.check_status		= ata_check_status,
-	.dev_select		= ata_std_dev_select,
-	.check_atapi_dma	= adma_check_atapi_dma,
+	.exec_command		= ata_exec_command,
 	.data_xfer		= ata_data_xfer,
+	.check_atapi_dma	= adma_check_atapi_dma,
+	.bmdma_stop		= adma_bmdma_stop,
+	.bmdma_status		= adma_bmdma_status,
 	.qc_prep		= adma_qc_prep,
 	.qc_issue		= adma_qc_issue,
+	.irq_on			= ata_irq_on,
+
 	.freeze			= adma_freeze,
 	.thaw			= adma_thaw,
 	.error_handler		= adma_error_handler,
-	.irq_clear		= ata_noop_irq_clear,
-	.irq_on			= ata_irq_on,
+
 	.port_start		= adma_port_start,
 	.port_stop		= adma_port_stop,
 	.host_stop		= adma_host_stop,
-	.bmdma_stop		= adma_bmdma_stop,
-	.bmdma_status		= adma_bmdma_status,
 };
 
 static struct ata_port_info adma_port_info[] = {
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index f50381b4ba06..865030ae8f8a 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -1198,16 +1198,15 @@ static struct scsi_host_template sata_fsl_sht = {
 };
 
 static const struct ata_port_operations sata_fsl_ops = {
+	.inherits = &sata_port_ops,
+
 	.check_status = sata_fsl_check_status,
 	.check_altstatus = sata_fsl_check_status,
-	.dev_select = ata_noop_dev_select,
 
 	.tf_read = sata_fsl_tf_read,
 
-	.qc_defer = ata_std_qc_defer,
 	.qc_prep = sata_fsl_qc_prep,
 	.qc_issue = sata_fsl_qc_issue,
-	.irq_clear = ata_noop_irq_clear,
 
 	.scr_read = sata_fsl_scr_read,
 	.scr_write = sata_fsl_scr_write,
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index bb853df865da..047f80f5825c 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -522,26 +522,13 @@ static int inic_port_start(struct ata_port *ap)
 }
 
 static struct ata_port_operations inic_port_ops = {
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
-
-	.scr_read		= inic_scr_read,
-	.scr_write		= inic_scr_write,
+	.inherits		= &ata_sff_port_ops,
 
 	.bmdma_setup		= inic_bmdma_setup,
 	.bmdma_start		= inic_bmdma_start,
 	.bmdma_stop		= inic_bmdma_stop,
 	.bmdma_status		= inic_bmdma_status,
-
-	.irq_clear		= ata_noop_irq_clear,
-	.irq_on			= ata_irq_on,
-
-	.qc_prep	 	= ata_qc_prep,
 	.qc_issue		= inic_qc_issue,
-	.data_xfer		= ata_data_xfer,
 
 	.freeze			= inic_freeze,
 	.thaw			= inic_thaw,
@@ -549,8 +536,10 @@ static struct ata_port_operations inic_port_ops = {
 	.post_internal_cmd	= inic_post_internal_cmd,
 	.dev_config		= inic_dev_config,
 
-	.port_resume		= inic_port_resume,
+	.scr_read		= inic_scr_read,
+	.scr_write		= inic_scr_write,
 
+	.port_resume		= inic_port_resume,
 	.port_start		= inic_port_start,
 };
 
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 52d41edadb72..f341a82d27bf 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -526,23 +526,16 @@ static struct scsi_host_template mv6_sht = {
 	.dma_boundary		= MV_DMA_BOUNDARY,
 };
 
-static const struct ata_port_operations mv5_ops = {
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
+static struct ata_port_operations mv5_ops = {
+	.inherits		= &ata_sff_port_ops,
 
 	.qc_prep		= mv_qc_prep,
 	.qc_issue		= mv_qc_issue,
-	.data_xfer		= ata_data_xfer,
 
-	.irq_clear		= ata_noop_irq_clear,
-	.irq_on			= ata_irq_on,
-
-	.error_handler		= mv_error_handler,
 	.freeze			= mv_eh_freeze,
 	.thaw			= mv_eh_thaw,
+	.error_handler		= mv_error_handler,
+	.post_internal_cmd	= ATA_OP_NULL,
 
 	.scr_read		= mv5_scr_read,
 	.scr_write		= mv5_scr_write,
@@ -551,57 +544,18 @@ static const struct ata_port_operations mv5_ops = {
 	.port_stop		= mv_port_stop,
 };
 
-static const struct ata_port_operations mv6_ops = {
-	.dev_config             = mv6_dev_config,
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
-
-	.qc_prep		= mv_qc_prep,
-	.qc_issue		= mv_qc_issue,
-	.data_xfer		= ata_data_xfer,
-
-	.irq_clear		= ata_noop_irq_clear,
-	.irq_on			= ata_irq_on,
-
-	.error_handler		= mv_error_handler,
-	.freeze			= mv_eh_freeze,
-	.thaw			= mv_eh_thaw,
+static struct ata_port_operations mv6_ops = {
+	.inherits		= &mv5_ops,
 	.qc_defer		= ata_std_qc_defer,
-
+	.dev_config             = mv6_dev_config,
 	.scr_read		= mv_scr_read,
 	.scr_write		= mv_scr_write,
-
-	.port_start		= mv_port_start,
-	.port_stop		= mv_port_stop,
 };
 
-static const struct ata_port_operations mv_iie_ops = {
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
-
+static struct ata_port_operations mv_iie_ops = {
+	.inherits		= &mv6_ops,
+	.dev_config		= ATA_OP_NULL,
 	.qc_prep		= mv_qc_prep_iie,
-	.qc_issue		= mv_qc_issue,
-	.data_xfer		= ata_data_xfer,
-
-	.irq_clear		= ata_noop_irq_clear,
-	.irq_on			= ata_irq_on,
-
-	.error_handler		= mv_error_handler,
-	.freeze			= mv_eh_freeze,
-	.thaw			= mv_eh_thaw,
-	.qc_defer		= ata_std_qc_defer,
-
-	.scr_read		= mv_scr_read,
-	.scr_write		= mv_scr_write,
-
-	.port_start		= mv_port_start,
-	.port_stop		= mv_port_stop,
 };
 
 static const struct ata_port_info mv_port_info[] = {
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 9e2b4cef48f2..7b7ba0e26903 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -404,106 +404,41 @@ static struct scsi_host_template nv_swncq_sht = {
 	.slave_configure	= nv_swncq_slave_config,
 };
 
-static const struct ata_port_operations nv_generic_ops = {
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.exec_command		= ata_exec_command,
-	.check_status		= ata_check_status,
-	.dev_select		= ata_std_dev_select,
-	.bmdma_setup		= ata_bmdma_setup,
-	.bmdma_start		= ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-	.mode_filter		= ata_pci_default_filter,
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
+static struct ata_port_operations nv_generic_ops = {
+	.inherits		= &ata_bmdma_port_ops,
 	.error_handler		= nv_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-	.data_xfer		= ata_data_xfer,
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
 	.scr_read		= nv_scr_read,
 	.scr_write		= nv_scr_write,
-	.port_start		= ata_sff_port_start,
 };
 
-static const struct ata_port_operations nv_nf2_ops = {
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.exec_command		= ata_exec_command,
-	.check_status		= ata_check_status,
-	.dev_select		= ata_std_dev_select,
-	.bmdma_setup		= ata_bmdma_setup,
-	.bmdma_start		= ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-	.mode_filter		= ata_pci_default_filter,
+static struct ata_port_operations nv_nf2_ops = {
+	.inherits		= &nv_generic_ops,
 	.freeze			= nv_nf2_freeze,
 	.thaw			= nv_nf2_thaw,
-	.error_handler		= nv_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-	.data_xfer		= ata_data_xfer,
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
-	.scr_read		= nv_scr_read,
-	.scr_write		= nv_scr_write,
-	.port_start		= ata_sff_port_start,
 };
 
-static const struct ata_port_operations nv_ck804_ops = {
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.exec_command		= ata_exec_command,
-	.check_status		= ata_check_status,
-	.dev_select		= ata_std_dev_select,
-	.bmdma_setup		= ata_bmdma_setup,
-	.bmdma_start		= ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-	.mode_filter		= ata_pci_default_filter,
+static struct ata_port_operations nv_ck804_ops = {
+	.inherits		= &nv_generic_ops,
 	.freeze			= nv_ck804_freeze,
 	.thaw			= nv_ck804_thaw,
-	.error_handler		= nv_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-	.data_xfer		= ata_data_xfer,
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
-	.scr_read		= nv_scr_read,
-	.scr_write		= nv_scr_write,
-	.port_start		= ata_sff_port_start,
 	.host_stop		= nv_ck804_host_stop,
 };
 
-static const struct ata_port_operations nv_adma_ops = {
-	.tf_load		= ata_tf_load,
-	.tf_read		= nv_adma_tf_read,
+static struct ata_port_operations nv_adma_ops = {
+	.inherits		= &nv_generic_ops,
+
 	.check_atapi_dma	= nv_adma_check_atapi_dma,
-	.exec_command		= ata_exec_command,
-	.check_status		= ata_check_status,
-	.dev_select		= ata_std_dev_select,
-	.bmdma_setup		= ata_bmdma_setup,
-	.bmdma_start		= ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
+	.tf_read		= nv_adma_tf_read,
 	.qc_defer		= ata_std_qc_defer,
 	.qc_prep		= nv_adma_qc_prep,
 	.qc_issue		= nv_adma_qc_issue,
-	.mode_filter		= ata_pci_default_filter,
+	.irq_clear		= nv_adma_irq_clear,
+
 	.freeze			= nv_adma_freeze,
 	.thaw			= nv_adma_thaw,
 	.error_handler		= nv_adma_error_handler,
 	.post_internal_cmd	= nv_adma_post_internal_cmd,
-	.data_xfer		= ata_data_xfer,
-	.irq_clear		= nv_adma_irq_clear,
-	.irq_on			= ata_irq_on,
-	.scr_read		= nv_scr_read,
-	.scr_write		= nv_scr_write,
+
 	.port_start		= nv_adma_port_start,
 	.port_stop		= nv_adma_port_stop,
 #ifdef CONFIG_PM
@@ -513,29 +448,17 @@ static const struct ata_port_operations nv_adma_ops = {
 	.host_stop		= nv_adma_host_stop,
 };
 
-static const struct ata_port_operations nv_swncq_ops = {
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.exec_command		= ata_exec_command,
-	.check_status		= ata_check_status,
-	.dev_select		= ata_std_dev_select,
-	.bmdma_setup		= ata_bmdma_setup,
-	.bmdma_start		= ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
+static struct ata_port_operations nv_swncq_ops = {
+	.inherits		= &nv_generic_ops,
+
 	.qc_defer		= ata_std_qc_defer,
 	.qc_prep		= nv_swncq_qc_prep,
 	.qc_issue		= nv_swncq_qc_issue,
-	.mode_filter		= ata_pci_default_filter,
+
 	.freeze			= nv_mcp55_freeze,
 	.thaw			= nv_mcp55_thaw,
 	.error_handler		= nv_swncq_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-	.data_xfer		= ata_data_xfer,
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
-	.scr_read		= nv_scr_read,
-	.scr_write		= nv_scr_write,
+
 #ifdef CONFIG_PM
 	.port_suspend		= nv_swncq_port_suspend,
 	.port_resume		= nv_swncq_port_resume,
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index 37c32ab3b23b..e09b975c973d 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -160,74 +160,42 @@ static struct scsi_host_template pdc_ata_sht = {
 	.dma_boundary		= ATA_DMA_BOUNDARY,
 };
 
-static const struct ata_port_operations pdc_sata_ops = {
+static const struct ata_port_operations pdc_common_ops = {
+	.inherits		= &ata_sff_port_ops,
+
 	.tf_load		= pdc_tf_load_mmio,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
 	.exec_command		= pdc_exec_command_mmio,
-	.dev_select		= ata_std_dev_select,
 	.check_atapi_dma	= pdc_check_atapi_dma,
-
 	.qc_prep		= pdc_qc_prep,
 	.qc_issue		= pdc_qc_issue_prot,
-	.freeze			= pdc_sata_freeze,
-	.thaw			= pdc_sata_thaw,
-	.error_handler		= pdc_sata_error_handler,
-	.post_internal_cmd	= pdc_post_internal_cmd,
-	.cable_detect		= pdc_sata_cable_detect,
-	.data_xfer		= ata_data_xfer,
 	.irq_clear		= pdc_irq_clear,
-	.irq_on			= ata_irq_on,
 
-	.scr_read		= pdc_sata_scr_read,
-	.scr_write		= pdc_sata_scr_write,
-	.port_start		= pdc_sata_port_start,
+	.post_internal_cmd	= pdc_post_internal_cmd,
 };
 
-/* First-generation chips need a more restrictive ->check_atapi_dma op */
-static const struct ata_port_operations pdc_old_sata_ops = {
-	.tf_load		= pdc_tf_load_mmio,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= pdc_exec_command_mmio,
-	.dev_select		= ata_std_dev_select,
-	.check_atapi_dma	= pdc_old_sata_check_atapi_dma,
-
-	.qc_prep		= pdc_qc_prep,
-	.qc_issue		= pdc_qc_issue_prot,
+static struct ata_port_operations pdc_sata_ops = {
+	.inherits		= &pdc_common_ops,
+	.cable_detect		= pdc_sata_cable_detect,
 	.freeze			= pdc_sata_freeze,
 	.thaw			= pdc_sata_thaw,
 	.error_handler		= pdc_sata_error_handler,
-	.post_internal_cmd	= pdc_post_internal_cmd,
-	.cable_detect		= pdc_sata_cable_detect,
-	.data_xfer		= ata_data_xfer,
-	.irq_clear		= pdc_irq_clear,
-	.irq_on			= ata_irq_on,
-
 	.scr_read		= pdc_sata_scr_read,
 	.scr_write		= pdc_sata_scr_write,
 	.port_start		= pdc_sata_port_start,
 };
 
-static const struct ata_port_operations pdc_pata_ops = {
-	.tf_load		= pdc_tf_load_mmio,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= pdc_exec_command_mmio,
-	.dev_select		= ata_std_dev_select,
-	.check_atapi_dma	= pdc_check_atapi_dma,
+/* First-generation chips need a more restrictive ->check_atapi_dma op */
+static struct ata_port_operations pdc_old_sata_ops = {
+	.inherits		= &pdc_sata_ops,
+	.check_atapi_dma	= pdc_old_sata_check_atapi_dma,
+};
 
-	.qc_prep		= pdc_qc_prep,
-	.qc_issue		= pdc_qc_issue_prot,
+static struct ata_port_operations pdc_pata_ops = {
+	.inherits		= &pdc_common_ops,
+	.cable_detect		= pdc_pata_cable_detect,
 	.freeze			= pdc_freeze,
 	.thaw			= pdc_thaw,
 	.error_handler		= pdc_pata_error_handler,
-	.post_internal_cmd	= pdc_post_internal_cmd,
-	.cable_detect		= pdc_pata_cable_detect,
-	.data_xfer		= ata_data_xfer,
-	.irq_clear		= pdc_irq_clear,
-	.irq_on			= ata_irq_on,
-
 	.port_start		= pdc_common_port_start,
 };
 
diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c
index 2566d0926aab..107ef09814de 100644
--- a/drivers/ata/sata_qstor.c
+++ b/drivers/ata/sata_qstor.c
@@ -131,27 +131,25 @@ static struct scsi_host_template qs_ata_sht = {
 	.dma_boundary		= QS_DMA_BOUNDARY,
 };
 
-static const struct ata_port_operations qs_ata_ops = {
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
+static struct ata_port_operations qs_ata_ops = {
+	.inherits		= &ata_sff_port_ops,
+
 	.check_atapi_dma	= qs_check_atapi_dma,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
+	.bmdma_stop		= qs_bmdma_stop,
+	.bmdma_status		= qs_bmdma_status,
 	.qc_prep		= qs_qc_prep,
 	.qc_issue		= qs_qc_issue,
-	.data_xfer		= ata_data_xfer,
+
 	.freeze			= qs_freeze,
 	.thaw			= qs_thaw,
 	.error_handler		= qs_error_handler,
-	.irq_clear		= ata_noop_irq_clear,
-	.irq_on			= ata_irq_on,
+	.post_internal_cmd	= ATA_OP_NULL,
+
 	.scr_read		= qs_scr_read,
 	.scr_write		= qs_scr_write,
+
 	.port_start		= qs_port_start,
 	.host_stop		= qs_host_stop,
-	.bmdma_stop		= qs_bmdma_stop,
-	.bmdma_status		= qs_bmdma_status,
 };
 
 static const struct ata_port_info qs_port_info[] = {
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 738c1a8ae3b6..eac7ca73cfa0 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -170,31 +170,14 @@ static struct scsi_host_template sil_sht = {
 	ATA_BMDMA_SHT(DRV_NAME),
 };
 
-static const struct ata_port_operations sil_ops = {
+static struct ata_port_operations sil_ops = {
+	.inherits		= &ata_bmdma_port_ops,
 	.dev_config		= sil_dev_config,
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
 	.set_mode		= sil_set_mode,
-	.mode_filter		= ata_pci_default_filter,
-	.bmdma_setup            = ata_bmdma_setup,
-	.bmdma_start            = ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_data_xfer,
 	.freeze			= sil_freeze,
 	.thaw			= sil_thaw,
-	.error_handler		= ata_bmdma_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
 	.scr_read		= sil_scr_read,
 	.scr_write		= sil_scr_write,
-	.port_start		= ata_sff_port_start,
 };
 
 static const struct ata_port_info sil_port_info[] = {
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 7fa63950d81a..363fb90e1047 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -390,34 +390,28 @@ static struct scsi_host_template sil24_sht = {
 	.dma_boundary		= ATA_DMA_BOUNDARY,
 };
 
-static const struct ata_port_operations sil24_ops = {
-	.dev_config		= sil24_dev_config,
+static struct ata_port_operations sil24_ops = {
+	.inherits		= &sata_pmp_port_ops,
 
 	.check_status		= sil24_check_status,
 	.check_altstatus	= sil24_check_status,
-	.dev_select		= ata_noop_dev_select,
-
 	.tf_read		= sil24_tf_read,
-
 	.qc_defer		= sil24_qc_defer,
 	.qc_prep		= sil24_qc_prep,
 	.qc_issue		= sil24_qc_issue,
 
-	.irq_clear		= ata_noop_irq_clear,
+	.freeze			= sil24_freeze,
+	.thaw			= sil24_thaw,
+	.error_handler		= sil24_error_handler,
+	.post_internal_cmd	= sil24_post_internal_cmd,
+	.dev_config		= sil24_dev_config,
 
 	.scr_read		= sil24_scr_read,
 	.scr_write		= sil24_scr_write,
-
 	.pmp_attach		= sil24_pmp_attach,
 	.pmp_detach		= sil24_pmp_detach,
 
-	.freeze			= sil24_freeze,
-	.thaw			= sil24_thaw,
-	.error_handler		= sil24_error_handler,
-	.post_internal_cmd	= sil24_post_internal_cmd,
-
 	.port_start		= sil24_port_start,
-
 #ifdef CONFIG_PM
 	.port_resume		= sil24_port_resume,
 #endif
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
index 4becb7fde5e7..9089c7ab5000 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -89,29 +89,10 @@ static struct scsi_host_template sis_sht = {
 	ATA_BMDMA_SHT(DRV_NAME),
 };
 
-static const struct ata_port_operations sis_ops = {
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
-	.bmdma_setup            = ata_bmdma_setup,
-	.bmdma_start            = ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_data_xfer,
-	.mode_filter		= ata_pci_default_filter,
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
-	.error_handler		= ata_bmdma_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
+static struct ata_port_operations sis_ops = {
+	.inherits		= &ata_bmdma_port_ops,
 	.scr_read		= sis_scr_read,
 	.scr_write		= sis_scr_write,
-	.port_start		= ata_sff_port_start,
 };
 
 static const struct ata_port_info sis_port_info = {
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index c8768396e006..8636f164256e 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -334,30 +334,16 @@ static struct scsi_host_template k2_sata_sht = {
 };
 
 
-static const struct ata_port_operations k2_sata_ops = {
+static struct ata_port_operations k2_sata_ops = {
+	.inherits		= &ata_bmdma_port_ops,
 	.tf_load		= k2_sata_tf_load,
 	.tf_read		= k2_sata_tf_read,
 	.check_status		= k2_stat_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
 	.check_atapi_dma	= k2_sata_check_atapi_dma,
 	.bmdma_setup		= k2_bmdma_setup_mmio,
 	.bmdma_start		= k2_bmdma_start_mmio,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_data_xfer,
-	.mode_filter		= ata_pci_default_filter,
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
-	.error_handler		= ata_bmdma_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
 	.scr_read		= k2_sata_scr_read,
 	.scr_write		= k2_sata_scr_write,
-	.port_start		= ata_sff_port_start,
 };
 
 static const struct ata_port_info k2_port_info[] = {
diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index 1802f92180e4..8138cda86a66 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -241,7 +241,8 @@ static struct scsi_host_template pdc_sata_sht = {
 	.dma_boundary		= ATA_DMA_BOUNDARY,
 };
 
-static const struct ata_port_operations pdc_20621_ops = {
+/* TODO: inherit from base port_ops after converting to new EH */
+static struct ata_port_operations pdc_20621_ops = {
 	.tf_load		= pdc_tf_load_mmio,
 	.tf_read		= ata_tf_read,
 	.check_status		= ata_check_status,
diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c
index 764d7064fa59..6ecd13fefa1a 100644
--- a/drivers/ata/sata_uli.c
+++ b/drivers/ata/sata_uli.c
@@ -79,34 +79,10 @@ static struct scsi_host_template uli_sht = {
 	ATA_BMDMA_SHT(DRV_NAME),
 };
 
-static const struct ata_port_operations uli_ops = {
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
-
-	.bmdma_setup            = ata_bmdma_setup,
-	.bmdma_start            = ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_data_xfer,
-
-	.mode_filter		= ata_pci_default_filter,
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
-	.error_handler		= ata_bmdma_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
-
+static struct ata_port_operations uli_ops = {
+	.inherits		= &ata_bmdma_port_ops,
 	.scr_read		= uli_scr_read,
 	.scr_write		= uli_scr_write,
-
-	.port_start		= ata_sff_port_start,
 };
 
 static const struct ata_port_info uli_port_info = {
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 9be877cb7f57..6326bcf8ea5d 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -103,97 +103,23 @@ static struct scsi_host_template svia_sht = {
 	ATA_BMDMA_SHT(DRV_NAME),
 };
 
-static const struct ata_port_operations vt6420_sata_ops = {
-	.mode_filter		= ata_pci_default_filter,
-
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
-
-	.bmdma_setup            = ata_bmdma_setup,
-	.bmdma_start            = ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_data_xfer,
-
+static struct ata_port_operations vt6420_sata_ops = {
+	.inherits		= &ata_bmdma_port_ops,
 	.freeze			= svia_noop_freeze,
-	.thaw			= ata_bmdma_thaw,
 	.error_handler		= vt6420_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
-
-	.port_start		= ata_sff_port_start,
 };
 
-static const struct ata_port_operations vt6421_pata_ops = {
+static struct ata_port_operations vt6421_pata_ops = {
+	.inherits		= &ata_bmdma_port_ops,
+	.cable_detect		= vt6421_pata_cable_detect,
 	.set_piomode		= vt6421_set_pio_mode,
 	.set_dmamode		= vt6421_set_dma_mode,
-	.mode_filter		= ata_pci_default_filter,
-
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
-
-	.bmdma_setup            = ata_bmdma_setup,
-	.bmdma_start            = ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_data_xfer,
-
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
-	.error_handler		= ata_bmdma_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-	.cable_detect		= vt6421_pata_cable_detect,
-
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
-
-	.port_start		= ata_sff_port_start,
 };
 
-static const struct ata_port_operations vt6421_sata_ops = {
-	.mode_filter		= ata_pci_default_filter,
-
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
-
-	.bmdma_setup            = ata_bmdma_setup,
-	.bmdma_start            = ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_data_xfer,
-
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
-	.error_handler		= ata_bmdma_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
-
+static struct ata_port_operations vt6421_sata_ops = {
+	.inherits		= &ata_bmdma_port_ops,
 	.scr_read		= svia_scr_read,
 	.scr_write		= svia_scr_write,
-
-	.port_start		= ata_sff_port_start,
 };
 
 static const struct ata_port_info vt6420_port_info = {
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index fd6855f0bf48..8045a72dc559 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -304,29 +304,14 @@ static struct scsi_host_template vsc_sata_sht = {
 };
 
 
-static const struct ata_port_operations vsc_sata_ops = {
+static struct ata_port_operations vsc_sata_ops = {
+	.inherits		= &ata_bmdma_port_ops,
 	.tf_load		= vsc_sata_tf_load,
 	.tf_read		= vsc_sata_tf_read,
-	.exec_command		= ata_exec_command,
-	.check_status		= ata_check_status,
-	.dev_select		= ata_std_dev_select,
-	.bmdma_setup            = ata_bmdma_setup,
-	.bmdma_start            = ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_data_xfer,
-	.mode_filter		= ata_pci_default_filter,
 	.freeze			= vsc_freeze,
 	.thaw			= vsc_thaw,
-	.error_handler		= ata_bmdma_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
 	.scr_read		= vsc_sata_scr_read,
 	.scr_write		= vsc_sata_scr_write,
-	.port_start		= ata_sff_port_start,
 };
 
 static void __devinit vsc_sata_setup_port(struct ata_ioports *port,
-- 
cgit v1.2.2


From 1bd5b715a305f6f13455e89becbd839010dd14b5 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Tue, 25 Mar 2008 12:22:49 +0900
Subject: libata: make ata_pci_init_one() not use ops->irq_handler and pi->sht

ata_pci_init_one() is the only function which uses ops->irq_handler
and pi->sht.  Other initialization functions take the same information
as arguments.  This causes confusion and duplicate unused entries in
structures.

Make ata_pci_init_one() take sht as an argument and use ata_interrupt
implicitly.  All current users use ata_interrupt and if different irq
handler is necessary open coding ata_pci_init_one() using
ata_prepare_sff_host() and ata_activate_sff_host can be done under ten
lines including error handling and driver which requires custom
interrupt handler is likely to require custom initialization anyway.

As ata_pci_init_one() was the last user of ops->irq_handler, this
patch also kills the field.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/ata_generic.c       |  3 +--
 drivers/ata/libata-core.c       |  1 -
 drivers/ata/libata-sff.c        |  7 ++++---
 drivers/ata/pata_acpi.c         |  3 +--
 drivers/ata/pata_ali.c          |  9 +--------
 drivers/ata/pata_amd.c          | 12 +-----------
 drivers/ata/pata_artop.c        |  6 +-----
 drivers/ata/pata_atiixp.c       |  3 +--
 drivers/ata/pata_cmd640.c       |  3 +--
 drivers/ata/pata_cmd64x.c       |  8 +-------
 drivers/ata/pata_cs5530.c       |  4 +---
 drivers/ata/pata_cs5535.c       |  3 +--
 drivers/ata/pata_cs5536.c       |  3 +--
 drivers/ata/pata_cypress.c      |  3 +--
 drivers/ata/pata_efar.c         |  3 +--
 drivers/ata/pata_hpt366.c       |  3 +--
 drivers/ata/pata_hpt37x.c       |  8 +-------
 drivers/ata/pata_hpt3x2n.c      |  3 +--
 drivers/ata/pata_it8213.c       |  3 +--
 drivers/ata/pata_it821x.c       |  4 +---
 drivers/ata/pata_jmicron.c      |  3 +--
 drivers/ata/pata_marvell.c      |  4 +---
 drivers/ata/pata_netcell.c      |  3 +--
 drivers/ata/pata_ns87410.c      |  3 +--
 drivers/ata/pata_ns87415.c      |  4 +---
 drivers/ata/pata_oldpiix.c      |  3 +--
 drivers/ata/pata_opti.c         |  3 +--
 drivers/ata/pata_optidma.c      |  4 +---
 drivers/ata/pata_pdc202xx_old.c |  5 +----
 drivers/ata/pata_radisys.c      |  3 +--
 drivers/ata/pata_rz1000.c       |  3 +--
 drivers/ata/pata_sc1200.c       |  3 +--
 drivers/ata/pata_serverworks.c  |  6 +-----
 drivers/ata/pata_sil680.c       |  4 +---
 drivers/ata/pata_sis.c          | 10 +---------
 drivers/ata/pata_sl82c105.c     |  4 +---
 drivers/ata/pata_triflex.c      |  3 +--
 drivers/ata/pata_via.c          |  8 +-------
 38 files changed, 40 insertions(+), 128 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index 0b5b515ae159..a912ee01a47c 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -120,7 +120,6 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id
 {
 	u16 command;
 	static const struct ata_port_info info = {
-		.sht = &generic_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
@@ -153,7 +152,7 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id
 	if (dev->vendor == PCI_VENDOR_ID_AL)
 	    	ata_pci_clear_simplex(dev);
 
-	return ata_pci_init_one(dev, ppi);
+	return ata_pci_init_one(dev, ppi, &generic_sht);
 }
 
 static struct pci_device_id ata_generic[] = {
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 32fa9ee397b6..abbe3229480c 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -109,7 +109,6 @@ const struct ata_port_operations ata_sff_port_ops = {
 	.irq_on			= ata_irq_on,
 
 	.port_start		= ata_sff_port_start,
-	.irq_handler		= ata_interrupt,
 };
 
 const struct ata_port_operations ata_bmdma_port_ops = {
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 1cf03d41aa33..a9d5898cbbc4 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -826,6 +826,7 @@ int ata_pci_activate_sff_host(struct ata_host *host,
  *	ata_pci_init_one - Initialize/register PCI IDE host controller
  *	@pdev: Controller to be initialized
  *	@ppi: array of port_info, must be enough for two ports
+ *	@sht: scsi_host_template to use when registering the host
  *
  *	This is a helper function which can be called from a driver's
  *	xxx_init_one() probe function if the hardware uses traditional
@@ -846,7 +847,8 @@ int ata_pci_activate_sff_host(struct ata_host *host,
  *	Zero on success, negative on errno-based value on error.
  */
 int ata_pci_init_one(struct pci_dev *pdev,
-		     const struct ata_port_info * const * ppi)
+		     const struct ata_port_info * const * ppi,
+		     struct scsi_host_template *sht)
 {
 	struct device *dev = &pdev->dev;
 	const struct ata_port_info *pi = NULL;
@@ -882,8 +884,7 @@ int ata_pci_init_one(struct pci_dev *pdev,
 		goto out;
 
 	pci_set_master(pdev);
-	rc = ata_pci_activate_sff_host(host, pi->port_ops->irq_handler,
-				       pi->sht);
+	rc = ata_pci_activate_sff_host(host, ata_interrupt, sht);
  out:
 	if (rc == 0)
 		devres_remove_group(&pdev->dev, NULL);
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index 35ad488db6ed..3edde51750da 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -264,7 +264,6 @@ static struct ata_port_operations pacpi_ops = {
 static int pacpi_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
-		.sht		= &pacpi_sht,
 		.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
 
 		.pio_mask	= 0x1f,
@@ -274,7 +273,7 @@ static int pacpi_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
 		.port_ops	= &pacpi_ops,
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
-	return ata_pci_init_one(pdev, ppi);
+	return ata_pci_init_one(pdev, ppi, &pacpi_sht);
 }
 
 static const struct pci_device_id pacpi_pci_tbl[] = {
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index b00a9cf72c31..f2924996f6e3 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -463,14 +463,12 @@ static void ali_init_chipset(struct pci_dev *pdev)
 static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info_early = {
-		.sht = &ali_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.port_ops = &ali_early_port_ops
 	};
 	/* Revision 0x20 added DMA */
 	static const struct ata_port_info info_20 = {
-		.sht = &ali_sht,
 		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
@@ -478,7 +476,6 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	};
 	/* Revision 0x20 with support logic added UDMA */
 	static const struct ata_port_info info_20_udma = {
-		.sht = &ali_sht,
 		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
@@ -487,7 +484,6 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	};
 	/* Revision 0xC2 adds UDMA66 */
 	static const struct ata_port_info info_c2 = {
-		.sht = &ali_sht,
 		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
@@ -496,7 +492,6 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	};
 	/* Revision 0xC3 is UDMA66 for now */
 	static const struct ata_port_info info_c3 = {
-		.sht = &ali_sht,
 		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
@@ -505,7 +500,6 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	};
 	/* Revision 0xC4 is UDMA100 */
 	static const struct ata_port_info info_c4 = {
-		.sht = &ali_sht,
 		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
@@ -514,7 +508,6 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	};
 	/* Revision 0xC5 is UDMA133 with LBA48 DMA */
 	static const struct ata_port_info info_c5 = {
-		.sht = &ali_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
@@ -559,7 +552,7 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	        	ppi[0] = &info_20_udma;
 		pci_dev_put(isa_bridge);
 	}
-	return ata_pci_init_one(pdev, ppi);
+	return ata_pci_init_one(pdev, ppi, &ali_sht);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index b0cb4eaf273c..644702cac6ee 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -413,7 +413,6 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info[10] = {
 		{	/* 0: AMD 7401 */
-			.sht = &amd_sht,
 			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,	/* No SWDMA */
@@ -421,7 +420,6 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 			.port_ops = &amd33_port_ops
 		},
 		{	/* 1: Early AMD7409 - no swdma */
-			.sht = &amd_sht,
 			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
@@ -429,7 +427,6 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 			.port_ops = &amd66_port_ops
 		},
 		{	/* 2: AMD 7409, no swdma errata */
-			.sht = &amd_sht,
 			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
@@ -437,7 +434,6 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 			.port_ops = &amd66_port_ops
 		},
 		{	/* 3: AMD 7411 */
-			.sht = &amd_sht,
 			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
@@ -445,7 +441,6 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 			.port_ops = &amd100_port_ops
 		},
 		{	/* 4: AMD 7441 */
-			.sht = &amd_sht,
 			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
@@ -453,7 +448,6 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 			.port_ops = &amd100_port_ops
 		},
 		{	/* 5: AMD 8111*/
-			.sht = &amd_sht,
 			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
@@ -461,7 +455,6 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 			.port_ops = &amd133_port_ops
 		},
 		{	/* 6: AMD 8111 UDMA 100 (Serenade) */
-			.sht = &amd_sht,
 			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
@@ -469,7 +462,6 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 			.port_ops = &amd133_port_ops
 		},
 		{	/* 7: Nvidia Nforce */
-			.sht = &amd_sht,
 			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
@@ -477,7 +469,6 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 			.port_ops = &nv100_port_ops
 		},
 		{	/* 8: Nvidia Nforce2 and later */
-			.sht = &amd_sht,
 			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
@@ -485,7 +476,6 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 			.port_ops = &nv133_port_ops
 		},
 		{	/* 9: AMD CS5536 (Geode companion) */
-			.sht = &amd_sht,
 			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
@@ -544,7 +534,7 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	}
 
 	/* And fire it up */
-	return ata_pci_init_one(pdev, ppi);
+	return ata_pci_init_one(pdev, ppi, &amd_sht);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index 0101e5aef3e0..698a53c96111 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -352,7 +352,6 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	static int printed_version;
 	static const struct ata_port_info info_6210 = {
-		.sht		= &artop_sht,
 		.flags		= ATA_FLAG_SLAVE_POSS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
@@ -360,7 +359,6 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
 		.port_ops	= &artop6210_ops,
 	};
 	static const struct ata_port_info info_626x = {
-		.sht		= &artop_sht,
 		.flags		= ATA_FLAG_SLAVE_POSS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
@@ -368,7 +366,6 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
 		.port_ops	= &artop6260_ops,
 	};
 	static const struct ata_port_info info_628x = {
-		.sht		= &artop_sht,
 		.flags		= ATA_FLAG_SLAVE_POSS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
@@ -376,7 +373,6 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
 		.port_ops	= &artop6260_ops,
 	};
 	static const struct ata_port_info info_628x_fast = {
-		.sht		= &artop_sht,
 		.flags		= ATA_FLAG_SLAVE_POSS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
@@ -434,7 +430,7 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
 
 	BUG_ON(ppi[0] == NULL);
 
-	return ata_pci_init_one(pdev, ppi);
+	return ata_pci_init_one(pdev, ppi, &artop_sht);
 }
 
 static const struct pci_device_id artop_pci_tbl[] = {
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index 2655f6a17ad3..6fe433ba62bd 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -241,7 +241,6 @@ static struct ata_port_operations atiixp_port_ops = {
 static int atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
-		.sht = &atiixp_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x06,	/* No MWDMA0 support */
@@ -249,7 +248,7 @@ static int atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 		.port_ops = &atiixp_port_ops
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
-	return ata_pci_init_one(dev, ppi);
+	return ata_pci_init_one(dev, ppi, &atiixp_sht);
 }
 
 static const struct pci_device_id atiixp[] = {
diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c
index 061c891c8a66..efd2bb5747b4 100644
--- a/drivers/ata/pata_cmd640.c
+++ b/drivers/ata/pata_cmd640.c
@@ -211,7 +211,6 @@ static void cmd640_hardware_init(struct pci_dev *pdev)
 static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
-		.sht = &cmd640_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.port_ops = &cmd640_port_ops
@@ -225,7 +224,7 @@ static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	cmd640_hardware_init(pdev);
 
-	return ata_pci_init_one(pdev, ppi);
+	return ata_pci_init_one(pdev, ppi, &cmd640_sht);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index 1ac8ecfb97e2..bfd72ef9cd31 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -298,21 +298,18 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	static const struct ata_port_info cmd_info[6] = {
 		{	/* CMD 643 - no UDMA */
-			.sht = &cmd64x_sht,
 			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
 			.port_ops = &cmd64x_port_ops
 		},
 		{	/* CMD 646 with broken UDMA */
-			.sht = &cmd64x_sht,
 			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
 			.port_ops = &cmd64x_port_ops
 		},
 		{	/* CMD 646 with working UDMA */
-			.sht = &cmd64x_sht,
 			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
@@ -320,14 +317,12 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 			.port_ops = &cmd64x_port_ops
 		},
 		{	/* CMD 646 rev 1  */
-			.sht = &cmd64x_sht,
 			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
 			.port_ops = &cmd646r1_port_ops
 		},
 		{	/* CMD 648 */
-			.sht = &cmd64x_sht,
 			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
@@ -335,7 +330,6 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 			.port_ops = &cmd648_port_ops
 		},
 		{	/* CMD 649 */
-			.sht = &cmd64x_sht,
 			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
@@ -379,7 +373,7 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	pci_write_config_byte(pdev, UDIDETCR0, 0xF0);
 #endif
 
-	return ata_pci_init_one(pdev, ppi);
+	return ata_pci_init_one(pdev, ppi, &cmd64x_sht);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index e4a16a578cac..c632ce499d33 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -298,7 +298,6 @@ fail_put:
 static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
-		.sht = &cs5530_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
@@ -307,7 +306,6 @@ static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	};
 	/* The docking connector doesn't do UDMA, and it seems not MWDMA */
 	static const struct ata_port_info info_palmax_secondary = {
-		.sht = &cs5530_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.port_ops = &cs5530_port_ops
@@ -327,7 +325,7 @@ static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		ppi[1] = &info_palmax_secondary;
 
 	/* Now kick off ATA set up */
-	return ata_pci_init_one(pdev, ppi);
+	return ata_pci_init_one(pdev, ppi, &cs5530_sht);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index f910a8aa7437..d78cf95cbe45 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -181,7 +181,6 @@ static struct ata_port_operations cs5535_port_ops = {
 static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
-		.sht = &cs5535_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
@@ -200,7 +199,7 @@ static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	rdmsr(ATAC_CH0D1_PIO, timings, dummy);
 	if (CS5535_BAD_PIO(timings))
 		wrmsr(ATAC_CH0D1_PIO, 0xF7F4F7F4UL, 0);
-	return ata_pci_init_one(dev, ppi);
+	return ata_pci_init_one(dev, ppi, &cs5535_sht);
 }
 
 static const struct pci_device_id cs5535[] = {
diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c
index 075ee6a7be39..f7c0e4e319ed 100644
--- a/drivers/ata/pata_cs5536.c
+++ b/drivers/ata/pata_cs5536.c
@@ -241,7 +241,6 @@ static struct ata_port_operations cs5536_port_ops = {
 static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
-		.sht = &cs5536_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
@@ -262,7 +261,7 @@ static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 		return -ENODEV;
 	}
 
-	return ata_pci_init_one(dev, ppi);
+	return ata_pci_init_one(dev, ppi, &cs5536_sht);
 }
 
 static const struct pci_device_id cs5536[] = {
diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c
index c459553e7d1e..cbd6670ea0de 100644
--- a/drivers/ata/pata_cypress.c
+++ b/drivers/ata/pata_cypress.c
@@ -123,7 +123,6 @@ static struct ata_port_operations cy82c693_port_ops = {
 static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
-		.sht = &cy82c693_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
@@ -137,7 +136,7 @@ static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *i
 	if (PCI_FUNC(pdev->devfn) != 1)
 		return -ENODEV;
 
-	return ata_pci_init_one(pdev, ppi);
+	return ata_pci_init_one(pdev, ppi, &cy82c693_sht);
 }
 
 static const struct pci_device_id cy82c693[] = {
diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index ef62fc642c17..0260edac2370 100644
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -263,7 +263,6 @@ static int efar_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version;
 	static const struct ata_port_info info = {
-		.sht		= &efar_sht,
 		.flags		= ATA_FLAG_SLAVE_POSS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma1-2 */
@@ -276,7 +275,7 @@ static int efar_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 		dev_printk(KERN_DEBUG, &pdev->dev,
 			   "version " DRV_VERSION "\n");
 
-	return ata_pci_init_one(pdev, ppi);
+	return ata_pci_init_one(pdev, ppi, &efar_sht);
 }
 
 static const struct pci_device_id efar_pci_tbl[] = {
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index 788955f57ff8..b62d398ed84b 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -350,7 +350,6 @@ static void hpt36x_init_chipset(struct pci_dev *dev)
 static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info_hpt366 = {
-		.sht = &hpt36x_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
@@ -394,7 +393,7 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 			break;
 	}
 	/* Now kick off ATA set up */
-	return ata_pci_init_one(dev, ppi);
+	return ata_pci_init_one(dev, ppi, &hpt36x_sht);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index c42eec70d297..a43c19753669 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -783,7 +783,6 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	/* HPT370 - UDMA100 */
 	static const struct ata_port_info info_hpt370 = {
-		.sht = &hpt37x_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
@@ -792,7 +791,6 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	};
 	/* HPT370A - UDMA100 */
 	static const struct ata_port_info info_hpt370a = {
-		.sht = &hpt37x_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
@@ -801,7 +799,6 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	};
 	/* HPT370 - UDMA100 */
 	static const struct ata_port_info info_hpt370_33 = {
-		.sht = &hpt37x_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
@@ -810,7 +807,6 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	};
 	/* HPT370A - UDMA100 */
 	static const struct ata_port_info info_hpt370a_33 = {
-		.sht = &hpt37x_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
@@ -819,7 +815,6 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	};
 	/* HPT371, 372 and friends - UDMA133 */
 	static const struct ata_port_info info_hpt372 = {
-		.sht = &hpt37x_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
@@ -828,7 +823,6 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	};
 	/* HPT374 - UDMA100 */
 	static const struct ata_port_info info_hpt374 = {
-		.sht = &hpt37x_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
@@ -1051,7 +1045,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	port_info = *port;
 	port_info.private_data = private_data;
 
-	return ata_pci_init_one(dev, ppi);
+	return ata_pci_init_one(dev, ppi, &hpt37x_sht);
 }
 
 static const struct pci_device_id hpt37x[] = {
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index b77b1279d757..2c178c30116c 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -452,7 +452,6 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	/* HPT372N and friends - UDMA133 */
 	static const struct ata_port_info info = {
-		.sht = &hpt3x2n_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
@@ -568,7 +567,7 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	}
 
 	/* Now kick off ATA set up */
-	return ata_pci_init_one(dev, ppi);
+	return ata_pci_init_one(dev, ppi, &hpt3x2n_sht);
 }
 
 static const struct pci_device_id hpt3x2n[] = {
diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c
index 9ce89522e764..291a0d6e2434 100644
--- a/drivers/ata/pata_it8213.c
+++ b/drivers/ata/pata_it8213.c
@@ -274,7 +274,6 @@ static int it8213_init_one (struct pci_dev *pdev, const struct pci_device_id *en
 {
 	static int printed_version;
 	static const struct ata_port_info info = {
-		.sht		= &it8213_sht,
 		.flags		= ATA_FLAG_SLAVE_POSS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
@@ -288,7 +287,7 @@ static int it8213_init_one (struct pci_dev *pdev, const struct pci_device_id *en
 		dev_printk(KERN_DEBUG, &pdev->dev,
 			   "version " DRV_VERSION "\n");
 
-	return ata_pci_init_one(pdev, ppi);
+	return ata_pci_init_one(pdev, ppi, &it8213_sht);
 }
 
 static const struct pci_device_id it8213_pci_tbl[] = {
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 669d224d30ca..63c5cf0d1fee 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -687,14 +687,12 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	u8 conf;
 
 	static const struct ata_port_info info_smart = {
-		.sht = &it821x_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
 		.port_ops = &it821x_smart_port_ops
 	};
 	static const struct ata_port_info info_passthru = {
-		.sht = &it821x_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
@@ -724,7 +722,7 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	else
 		ppi[0] = &info_smart;
 
-	return ata_pci_init_one(pdev, ppi);
+	return ata_pci_init_one(pdev, ppi, &it821x_sht);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 61ff5c6b4568..859e47a600cc 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -148,7 +148,6 @@ static struct ata_port_operations jmicron_ops = {
 static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
-		.sht		= &jmicron_sht,
 		.flags	= ATA_FLAG_SLAVE_POSS,
 
 		.pio_mask	= 0x1f,
@@ -159,7 +158,7 @@ static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *i
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
 
-	return ata_pci_init_one(pdev, ppi);
+	return ata_pci_init_one(pdev, ppi, &jmicron_sht);
 }
 
 static const struct pci_device_id jmicron_pci_tbl[] = {
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index 286310fc5910..d8da4f344c0a 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -119,7 +119,6 @@ static struct ata_port_operations marvell_ops = {
 static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
-		.sht		= &marvell_sht,
 		.flags		= ATA_FLAG_SLAVE_POSS,
 
 		.pio_mask	= 0x1f,
@@ -129,7 +128,6 @@ static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *i
 		.port_ops	= &marvell_ops,
 	};
 	static const struct ata_port_info info_sata = {
-		.sht		= &marvell_sht,
 		/* Slave possible as its magically mapped not real */
 		.flags		= ATA_FLAG_SLAVE_POSS,
 
@@ -144,7 +142,7 @@ static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *i
 	if (pdev->device == 0x6101)
 		ppi[1] = &ata_dummy_port_info;
 
-	return ata_pci_init_one(pdev, ppi);
+	return ata_pci_init_one(pdev, ppi, &marvell_sht);
 }
 
 static const struct pci_device_id marvell_pci_tbl[] = {
diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c
index 65389d1837b3..ae50a5e85cf1 100644
--- a/drivers/ata/pata_netcell.c
+++ b/drivers/ata/pata_netcell.c
@@ -48,7 +48,6 @@ static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 {
 	static int printed_version;
 	static const struct ata_port_info info = {
-		.sht		= &netcell_sht,
 		.flags		= ATA_FLAG_SLAVE_POSS,
 		/* Actually we don't really care about these as the
 		   firmware deals with it */
@@ -72,7 +71,7 @@ static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 	ata_pci_clear_simplex(pdev);
 
 	/* And let the library code do the work */
-	return ata_pci_init_one(pdev, port_info);
+	return ata_pci_init_one(pdev, port_info, &netcell_sht);
 }
 
 static const struct pci_device_id netcell_pci_tbl[] = {
diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c
index 5b1982fa0be1..1bdca8f1e767 100644
--- a/drivers/ata/pata_ns87410.c
+++ b/drivers/ata/pata_ns87410.c
@@ -158,13 +158,12 @@ static struct ata_port_operations ns87410_port_ops = {
 static int ns87410_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
-		.sht = &ns87410_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x0F,
 		.port_ops = &ns87410_port_ops
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
-	return ata_pci_init_one(dev, ppi);
+	return ata_pci_init_one(dev, ppi, &ns87410_sht);
 }
 
 static const struct pci_device_id ns87410[] = {
diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c
index 38d86a262dbb..42508940e4a9 100644
--- a/drivers/ata/pata_ns87415.c
+++ b/drivers/ata/pata_ns87415.c
@@ -345,7 +345,6 @@ static int ns87415_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 {
 	static int printed_version;
 	static const struct ata_port_info info = {
-		.sht		= &ns87415_sht,
 		.flags		= ATA_FLAG_SLAVE_POSS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
@@ -355,7 +354,6 @@ static int ns87415_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 	int rc;
 #if defined(CONFIG_SUPERIO)
 	static const struct ata_port_info info87560 = {
-		.sht		= &ns87415_sht,
 		.flags		= ATA_FLAG_SLAVE_POSS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
@@ -377,7 +375,7 @@ static int ns87415_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 	pci_write_config_byte(pdev, 0x55, 0xEE);
 	/* Select PIO0 8bit clocking */
 	pci_write_config_byte(pdev, 0x54, 0xB7);
-	return ata_pci_init_one(pdev, ppi);
+	return ata_pci_init_one(pdev, ppi, &ns87415_sht);
 }
 
 static const struct pci_device_id ns87415_pci_tbl[] = {
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index f6062b37310d..9e3afadbd04a 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -252,7 +252,6 @@ static int oldpiix_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 {
 	static int printed_version;
 	static const struct ata_port_info info = {
-		.sht		= &oldpiix_sht,
 		.flags		= ATA_FLAG_SLAVE_POSS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma1-2 */
@@ -264,7 +263,7 @@ static int oldpiix_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 		dev_printk(KERN_DEBUG, &pdev->dev,
 			   "version " DRV_VERSION "\n");
 
-	return ata_pci_init_one(pdev, ppi);
+	return ata_pci_init_one(pdev, ppi, &oldpiix_sht);
 }
 
 static const struct pci_device_id oldpiix_pci_tbl[] = {
diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c
index c4a0795c3ff4..8601d9c3cb39 100644
--- a/drivers/ata/pata_opti.c
+++ b/drivers/ata/pata_opti.c
@@ -178,7 +178,6 @@ static struct ata_port_operations opti_port_ops = {
 static int opti_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
-		.sht = &opti_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.port_ops = &opti_port_ops
@@ -189,7 +188,7 @@ static int opti_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");
 
-	return ata_pci_init_one(dev, ppi);
+	return ata_pci_init_one(dev, ppi, &opti_sht);
 }
 
 static const struct pci_device_id opti[] = {
diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index eb4b08190e3a..c376f9ef77c8 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -414,14 +414,12 @@ done_nomsg:		/* Wrong chip revision */
 static int optidma_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info_82c700 = {
-		.sht = &optidma_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
 		.port_ops = &optidma_port_ops
 	};
 	static const struct ata_port_info info_82c700_udma = {
-		.sht = &optidma_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
@@ -447,7 +445,7 @@ static int optidma_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	if (optiplus_with_udma(dev))
 		ppi[0] = &info_82c700_udma;
 
-	return ata_pci_init_one(dev, ppi);
+	return ata_pci_init_one(dev, ppi, &optidma_sht);
 }
 
 static const struct pci_device_id optidma[] = {
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index 4daac20df0bc..5545fbab6a7e 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -290,7 +290,6 @@ static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id
 {
 	static const struct ata_port_info info[3] = {
 		{
-			.sht = &pdc202xx_sht,
 			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
@@ -298,7 +297,6 @@ static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id
 			.port_ops = &pdc2024x_port_ops
 		},
 		{
-			.sht = &pdc202xx_sht,
 			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
@@ -306,7 +304,6 @@ static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id
 			.port_ops = &pdc2026x_port_ops
 		},
 		{
-			.sht = &pdc202xx_sht,
 			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
@@ -327,7 +324,7 @@ static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id
 				return -ENODEV;
 		}
 	}
-	return ata_pci_init_one(dev, ppi);
+	return ata_pci_init_one(dev, ppi, &pdc202xx_sht);
 }
 
 static const struct pci_device_id pdc202xx[] = {
diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index 94e60b3a1ec6..145d5ba92795 100644
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -216,7 +216,6 @@ static int radisys_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 {
 	static int printed_version;
 	static const struct ata_port_info info = {
-		.sht		= &radisys_sht,
 		.flags		= ATA_FLAG_SLAVE_POSS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma1-2 */
@@ -229,7 +228,7 @@ static int radisys_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 		dev_printk(KERN_DEBUG, &pdev->dev,
 			   "version " DRV_VERSION "\n");
 
-	return ata_pci_init_one(pdev, ppi);
+	return ata_pci_init_one(pdev, ppi, &radisys_sht);
 }
 
 static const struct pci_device_id radisys_pci_tbl[] = {
diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index a2aef7328bfc..04be6aee4354 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -89,7 +89,6 @@ static int rz1000_init_one (struct pci_dev *pdev, const struct pci_device_id *en
 {
 	static int printed_version;
 	static const struct ata_port_info info = {
-		.sht = &rz1000_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.port_ops = &rz1000_port_ops
@@ -100,7 +99,7 @@ static int rz1000_init_one (struct pci_dev *pdev, const struct pci_device_id *en
 		printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
 
 	if (rz1000_fifo_disable(pdev) == 0)
-		return ata_pci_init_one(pdev, ppi);
+		return ata_pci_init_one(pdev, ppi, &rz1000_sht);
 
 	printk(KERN_ERR DRV_NAME ": failed to disable read-ahead on chipset..\n");
 	/* Not safe to use so skip */
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index 362b7f829d8e..38c7fb0bebe9 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -204,7 +204,6 @@ static struct ata_port_operations sc1200_port_ops = {
 static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
-		.sht = &sc1200_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
@@ -214,7 +213,7 @@ static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	/* Can't enable port 2 yet, see top comments */
 	const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
 
-	return ata_pci_init_one(dev, ppi);
+	return ata_pci_init_one(dev, ppi, &sc1200_sht);
 }
 
 static const struct pci_device_id sc1200[] = {
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index 627abcf85c6e..515b5b70a555 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -399,28 +399,24 @@ static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id
 {
 	static const struct ata_port_info info[4] = {
 		{ /* OSB4 */
-			.sht = &serverworks_sht,
 			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
 			.udma_mask = 0x07,
 			.port_ops = &serverworks_osb4_port_ops
 		}, { /* OSB4 no UDMA */
-			.sht = &serverworks_sht,
 			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
 			.udma_mask = 0x00,
 			.port_ops = &serverworks_osb4_port_ops
 		}, { /* CSB5 */
-			.sht = &serverworks_sht,
 			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
 			.udma_mask = ATA_UDMA4,
 			.port_ops = &serverworks_csb_port_ops
 		}, { /* CSB5 - later revisions*/
-			.sht = &serverworks_sht,
 			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
@@ -465,7 +461,7 @@ static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id
 	if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE)
 		ata_pci_clear_simplex(pdev);
 
-	return ata_pci_init_one(pdev, ppi);
+	return ata_pci_init_one(pdev, ppi, &serverworks_sht);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 0936f534d9c7..5313deeffa6d 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -282,7 +282,6 @@ static int __devinit sil680_init_one(struct pci_dev *pdev,
 				     const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
-		.sht = &sil680_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
@@ -290,7 +289,6 @@ static int __devinit sil680_init_one(struct pci_dev *pdev,
 		.port_ops = &sil680_port_ops
 	};
 	static const struct ata_port_info info_slow = {
-		.sht = &sil680_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
@@ -364,7 +362,7 @@ static int __devinit sil680_init_one(struct pci_dev *pdev,
 				 &sil680_sht);
 
 use_ioports:
-	return ata_pci_init_one(pdev, ppi);
+	return ata_pci_init_one(pdev, ppi, &sil680_sht);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index 3ed628670cd7..32be13ba5f06 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -565,7 +565,6 @@ static struct ata_port_operations sis_old_ops = {
 };
 
 static const struct ata_port_info sis_info = {
-	.sht		= &sis_sht,
 	.flags		= ATA_FLAG_SLAVE_POSS,
 	.pio_mask	= 0x1f,	/* pio0-4 */
 	.mwdma_mask	= 0x07,
@@ -573,7 +572,6 @@ static const struct ata_port_info sis_info = {
 	.port_ops	= &sis_old_ops,
 };
 static const struct ata_port_info sis_info33 = {
-	.sht		= &sis_sht,
 	.flags		= ATA_FLAG_SLAVE_POSS,
 	.pio_mask	= 0x1f,	/* pio0-4 */
 	.mwdma_mask	= 0x07,
@@ -581,42 +579,36 @@ static const struct ata_port_info sis_info33 = {
 	.port_ops	= &sis_old_ops,
 };
 static const struct ata_port_info sis_info66 = {
-	.sht		= &sis_sht,
 	.flags		= ATA_FLAG_SLAVE_POSS,
 	.pio_mask	= 0x1f,	/* pio0-4 */
 	.udma_mask	= ATA_UDMA4,	/* UDMA 66 */
 	.port_ops	= &sis_66_ops,
 };
 static const struct ata_port_info sis_info100 = {
-	.sht		= &sis_sht,
 	.flags		= ATA_FLAG_SLAVE_POSS,
 	.pio_mask	= 0x1f,	/* pio0-4 */
 	.udma_mask	= ATA_UDMA5,
 	.port_ops	= &sis_100_ops,
 };
 static const struct ata_port_info sis_info100_early = {
-	.sht		= &sis_sht,
 	.flags		= ATA_FLAG_SLAVE_POSS,
 	.udma_mask	= ATA_UDMA5,
 	.pio_mask	= 0x1f,	/* pio0-4 */
 	.port_ops	= &sis_66_ops,
 };
 static const struct ata_port_info sis_info133 = {
-	.sht		= &sis_sht,
 	.flags		= ATA_FLAG_SLAVE_POSS,
 	.pio_mask	= 0x1f,	/* pio0-4 */
 	.udma_mask	= ATA_UDMA6,
 	.port_ops	= &sis_133_ops,
 };
 const struct ata_port_info sis_info133_for_sata = {
-	.sht		= &sis_sht,
 	.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
 	.pio_mask	= 0x1f,	/* pio0-4 */
 	.udma_mask	= ATA_UDMA6,
 	.port_ops	= &sis_133_for_sata_ops,
 };
 static const struct ata_port_info sis_info133_early = {
-	.sht		= &sis_sht,
 	.flags		= ATA_FLAG_SLAVE_POSS,
 	.pio_mask	= 0x1f,	/* pio0-4 */
 	.udma_mask	= ATA_UDMA6,
@@ -844,7 +836,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	sis_fixup(pdev, chipset);
 
-	return ata_pci_init_one(pdev, ppi);
+	return ata_pci_init_one(pdev, ppi, &sis_sht);
 }
 
 static const struct pci_device_id sis_pci_tbl[] = {
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index 0dd8e2f69558..2d14b2505c7d 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -289,14 +289,12 @@ static int sl82c105_bridge_revision(struct pci_dev *pdev)
 static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info_dma = {
-		.sht = &sl82c105_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
 		.port_ops = &sl82c105_port_ops
 	};
 	static const struct ata_port_info info_early = {
-		.sht = &sl82c105_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.port_ops = &sl82c105_port_ops
@@ -325,7 +323,7 @@ static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id
 	val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16;
 	pci_write_config_dword(dev, 0x40, val);
 
-	return ata_pci_init_one(dev, ppi);
+	return ata_pci_init_one(dev, ppi, &sl82c105_sht);
 }
 
 static const struct pci_device_id sl82c105[] = {
diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c
index bc4956ef0931..86dc66c37389 100644
--- a/drivers/ata/pata_triflex.c
+++ b/drivers/ata/pata_triflex.c
@@ -195,7 +195,6 @@ static struct ata_port_operations triflex_port_ops = {
 static int triflex_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
-		.sht = &triflex_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
@@ -207,7 +206,7 @@ static int triflex_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");
 
-	return ata_pci_init_one(dev, ppi);
+	return ata_pci_init_one(dev, ppi, &triflex_sht);
 }
 
 static const struct pci_device_id triflex[] = {
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index d1edb1b27480..e66bb85ad3d1 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -398,7 +398,6 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	/* Early VIA without UDMA support */
 	static const struct ata_port_info via_mwdma_info = {
-		.sht = &via_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
@@ -406,7 +405,6 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	};
 	/* Ditto with IRQ masking required */
 	static const struct ata_port_info via_mwdma_info_borked = {
-		.sht = &via_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
@@ -414,7 +412,6 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	};
 	/* VIA UDMA 33 devices (and borked 66) */
 	static const struct ata_port_info via_udma33_info = {
-		.sht = &via_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
@@ -423,7 +420,6 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	};
 	/* VIA UDMA 66 devices */
 	static const struct ata_port_info via_udma66_info = {
-		.sht = &via_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
@@ -432,7 +428,6 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	};
 	/* VIA UDMA 100 devices */
 	static const struct ata_port_info via_udma100_info = {
-		.sht = &via_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
@@ -441,7 +436,6 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	};
 	/* UDMA133 with bad AST (All current 133) */
 	static const struct ata_port_info via_udma133_info = {
-		.sht = &via_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
@@ -532,7 +526,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	/* We have established the device type, now fire it up */
 	type.private_data = (void *)config;
 
-	return ata_pci_init_one(pdev, ppi);
+	return ata_pci_init_one(pdev, ppi, &via_sht);
 }
 
 #ifdef CONFIG_PM
-- 
cgit v1.2.2


From 887125e3740283be25564bfc6fb5d24974b651ab Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Tue, 25 Mar 2008 12:22:49 +0900
Subject: libata: stop overloading port_info->private_data

port_info->private_data is currently used for two purposes - to record
private data about the port_info or to specify host->private_data to
use when allocating ata_host.

This overloading is confusing and counter-intuitive in that
port_info->private_data becomes host->private_data instead of
port->private_data.  In addition, port_info and host don't correspond
to each other 1-to-1.  Currently, the first non-NULL
port_info->private_data is used.

This patch makes port_info->private_data just be what it is -
private_data for the port_info where LLD can jot down extra info.
libata no longer sets host->private_data to the first non-NULL
port_info->private_data, @host_priv argument is added to
ata_pci_init_one() instead.  LLDs which use ata_pci_init_one() can use
this argument to pass in pointer to host private data.  LLDs which
don't should use init-register model anyway and can initialize
host->private_data directly.

Adding @host_priv instead of using init-register model for LLDs which
use ata_pci_init_one() is suggested by Alan Cox.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
---
 drivers/ata/ata_generic.c       |  2 +-
 drivers/ata/libata-core.c       |  2 --
 drivers/ata/libata-sff.c        |  4 +++-
 drivers/ata/pata_acpi.c         | 18 ++----------------
 drivers/ata/pata_ali.c          |  2 +-
 drivers/ata/pata_amd.c          | 27 +++++++--------------------
 drivers/ata/pata_artop.c        |  2 +-
 drivers/ata/pata_atiixp.c       |  2 +-
 drivers/ata/pata_cmd640.c       |  2 +-
 drivers/ata/pata_cmd64x.c       |  2 +-
 drivers/ata/pata_cs5530.c       |  2 +-
 drivers/ata/pata_cs5535.c       |  2 +-
 drivers/ata/pata_cs5536.c       |  2 +-
 drivers/ata/pata_cypress.c      |  2 +-
 drivers/ata/pata_efar.c         |  2 +-
 drivers/ata/pata_hpt366.c       | 12 ++++++------
 drivers/ata/pata_hpt37x.c       | 33 ++++++++++++++-------------------
 drivers/ata/pata_hpt3x2n.c      |  9 ++++-----
 drivers/ata/pata_it8213.c       |  2 +-
 drivers/ata/pata_it821x.c       |  2 +-
 drivers/ata/pata_jmicron.c      | 18 ++----------------
 drivers/ata/pata_marvell.c      | 18 ++----------------
 drivers/ata/pata_netcell.c      |  2 +-
 drivers/ata/pata_ns87410.c      |  2 +-
 drivers/ata/pata_ns87415.c      |  2 +-
 drivers/ata/pata_oldpiix.c      |  2 +-
 drivers/ata/pata_opti.c         |  2 +-
 drivers/ata/pata_optidma.c      |  2 +-
 drivers/ata/pata_pdc202xx_old.c |  2 +-
 drivers/ata/pata_radisys.c      |  2 +-
 drivers/ata/pata_rz1000.c       |  2 +-
 drivers/ata/pata_sc1200.c       |  2 +-
 drivers/ata/pata_serverworks.c  |  2 +-
 drivers/ata/pata_sil680.c       |  2 +-
 drivers/ata/pata_sis.c          |  8 +++-----
 drivers/ata/pata_sl82c105.c     |  2 +-
 drivers/ata/pata_triflex.c      |  2 +-
 drivers/ata/pata_via.c          | 19 ++++++++-----------
 38 files changed, 78 insertions(+), 144 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index a912ee01a47c..b23e2a1099c5 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -152,7 +152,7 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id
 	if (dev->vendor == PCI_VENDOR_ID_AL)
 	    	ata_pci_clear_simplex(dev);
 
-	return ata_pci_init_one(dev, ppi, &generic_sht);
+	return ata_pci_init_one(dev, ppi, &generic_sht, NULL);
 }
 
 static struct pci_device_id ata_generic[] = {
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index abbe3229480c..aa6bcd79d60a 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -6995,8 +6995,6 @@ struct ata_host *ata_host_alloc_pinfo(struct device *dev,
 
 		if (!host->ops && (pi->port_ops != &ata_dummy_port_ops))
 			host->ops = pi->port_ops;
-		if (!host->private_data && pi->private_data)
-			host->private_data = pi->private_data;
 	}
 
 	return host;
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index a9d5898cbbc4..6223ec042c80 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -827,6 +827,7 @@ int ata_pci_activate_sff_host(struct ata_host *host,
  *	@pdev: Controller to be initialized
  *	@ppi: array of port_info, must be enough for two ports
  *	@sht: scsi_host_template to use when registering the host
+ *	@host_priv: host private_data
  *
  *	This is a helper function which can be called from a driver's
  *	xxx_init_one() probe function if the hardware uses traditional
@@ -848,7 +849,7 @@ int ata_pci_activate_sff_host(struct ata_host *host,
  */
 int ata_pci_init_one(struct pci_dev *pdev,
 		     const struct ata_port_info * const * ppi,
-		     struct scsi_host_template *sht)
+		     struct scsi_host_template *sht, void *host_priv)
 {
 	struct device *dev = &pdev->dev;
 	const struct ata_port_info *pi = NULL;
@@ -882,6 +883,7 @@ int ata_pci_init_one(struct pci_dev *pdev,
 	rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
 	if (rc)
 		goto out;
+	host->private_data = host_priv;
 
 	pci_set_master(pdev);
 	rc = ata_pci_activate_sff_host(host, ata_interrupt, sht);
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index 3edde51750da..d337f3209caf 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -67,20 +67,6 @@ static int pacpi_cable_detect(struct ata_port *ap)
 		return ATA_CBL_PATA40;
 }
 
-/**
- *	pacpi_error_handler - Setup and error handler
- *	@ap: Port to handle
- *
- *	LOCKING:
- *	None (inherited from caller).
- */
-
-static void pacpi_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, pacpi_pre_reset, ata_std_softreset, NULL,
-			   ata_std_postreset);
-}
-
 /**
  *	pacpi_discover_modes	-	filter non ACPI modes
  *	@adev: ATA device
@@ -242,7 +228,7 @@ static struct ata_port_operations pacpi_ops = {
 	.mode_filter		= pacpi_mode_filter,
 	.set_piomode		= pacpi_set_piomode,
 	.set_dmamode		= pacpi_set_dmamode,
-	.error_handler		= pacpi_error_handler,
+	.prereset		= pacpi_pre_reset,
 	.port_start		= pacpi_port_start,
 };
 
@@ -273,7 +259,7 @@ static int pacpi_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
 		.port_ops	= &pacpi_ops,
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
-	return ata_pci_init_one(pdev, ppi, &pacpi_sht);
+	return ata_pci_init_one(pdev, ppi, &pacpi_sht, NULL);
 }
 
 static const struct pci_device_id pacpi_pci_tbl[] = {
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index f2924996f6e3..43c558f20f92 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -552,7 +552,7 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	        	ppi[0] = &info_20_udma;
 		pci_dev_put(isa_bridge);
 	}
-	return ata_pci_init_one(pdev, ppi, &ali_sht);
+	return ata_pci_init_one(pdev, ppi, &ali_sht, NULL);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 644702cac6ee..09c8286b6890 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -144,12 +144,6 @@ static int amd_pre_reset(struct ata_link *link, unsigned long deadline)
 	return ata_std_prereset(link, deadline);
 }
 
-static void amd_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, amd_pre_reset, ata_std_softreset, NULL,
-			   ata_std_postreset);
-}
-
 static int amd_cable_detect(struct ata_port *ap)
 {
 	static const u32 bitmask[2] = {0x03, 0x0C};
@@ -300,13 +294,6 @@ static int nv_pre_reset(struct ata_link *link, unsigned long deadline)
 	return ata_std_prereset(link, deadline);
 }
 
-static void nv_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, nv_pre_reset,
-			       ata_std_softreset, NULL,
-			       ata_std_postreset);
-}
-
 /**
  *	nv100_set_piomode	-	set initial PIO mode data
  *	@ap: ATA interface
@@ -358,7 +345,7 @@ static struct scsi_host_template amd_sht = {
 
 static const struct ata_port_operations amd_base_port_ops = {
 	.inherits	= &ata_bmdma_port_ops,
-	.error_handler	= amd_error_handler,
+	.prereset	= amd_pre_reset,
 };
 
 static struct ata_port_operations amd33_port_ops = {
@@ -393,7 +380,7 @@ static const struct ata_port_operations nv_base_port_ops = {
 	.inherits	= &ata_bmdma_port_ops,
 	.cable_detect	= ata_cable_ignore,
 	.mode_filter	= nv_mode_filter,
-	.error_handler	= nv_error_handler,
+	.prereset	= nv_pre_reset,
 	.host_stop	= nv_host_stop,
 };
 
@@ -483,10 +470,10 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 			.port_ops = &amd100_port_ops
 		}
 	};
-	struct ata_port_info pi;
-	const struct ata_port_info *ppi[] = { &pi, NULL };
+	const struct ata_port_info *ppi[] = { NULL, NULL };
 	static int printed_version;
 	int type = id->driver_data;
+	void *hpriv = NULL;
 	u8 fifo;
 	int rc;
 
@@ -511,7 +498,7 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	/*
 	 * Okay, type is determined now.  Apply type-specific workarounds.
 	 */
-	pi = info[type];
+	ppi[0] = &info[type];
 
 	if (type < 3)
 		ata_pci_clear_simplex(pdev);
@@ -530,11 +517,11 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		u32 udma;
 
 		pci_read_config_dword(pdev, 0x60, &udma);
-		pi.private_data = (void *)(unsigned long)udma;
+		hpriv = (void *)(unsigned long)udma;
 	}
 
 	/* And fire it up */
-	return ata_pci_init_one(pdev, ppi, &amd_sht);
+	return ata_pci_init_one(pdev, ppi, &amd_sht, hpriv);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index 698a53c96111..ebd15cadf15f 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -430,7 +430,7 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
 
 	BUG_ON(ppi[0] == NULL);
 
-	return ata_pci_init_one(pdev, ppi, &artop_sht);
+	return ata_pci_init_one(pdev, ppi, &artop_sht, NULL);
 }
 
 static const struct pci_device_id artop_pci_tbl[] = {
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index 6fe433ba62bd..0bea7e75d2d6 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -248,7 +248,7 @@ static int atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 		.port_ops = &atiixp_port_ops
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
-	return ata_pci_init_one(dev, ppi, &atiixp_sht);
+	return ata_pci_init_one(dev, ppi, &atiixp_sht, NULL);
 }
 
 static const struct pci_device_id atiixp[] = {
diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c
index efd2bb5747b4..27219b00edf4 100644
--- a/drivers/ata/pata_cmd640.c
+++ b/drivers/ata/pata_cmd640.c
@@ -224,7 +224,7 @@ static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	cmd640_hardware_init(pdev);
 
-	return ata_pci_init_one(pdev, ppi, &cmd640_sht);
+	return ata_pci_init_one(pdev, ppi, &cmd640_sht, NULL);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index bfd72ef9cd31..f0e566623614 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -373,7 +373,7 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	pci_write_config_byte(pdev, UDIDETCR0, 0xF0);
 #endif
 
-	return ata_pci_init_one(pdev, ppi, &cmd64x_sht);
+	return ata_pci_init_one(pdev, ppi, &cmd64x_sht, NULL);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index c632ce499d33..ac3ad55d7c3c 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -325,7 +325,7 @@ static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		ppi[1] = &info_palmax_secondary;
 
 	/* Now kick off ATA set up */
-	return ata_pci_init_one(pdev, ppi, &cs5530_sht);
+	return ata_pci_init_one(pdev, ppi, &cs5530_sht, NULL);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index d78cf95cbe45..5c0762ebf58c 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -199,7 +199,7 @@ static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	rdmsr(ATAC_CH0D1_PIO, timings, dummy);
 	if (CS5535_BAD_PIO(timings))
 		wrmsr(ATAC_CH0D1_PIO, 0xF7F4F7F4UL, 0);
-	return ata_pci_init_one(dev, ppi, &cs5535_sht);
+	return ata_pci_init_one(dev, ppi, &cs5535_sht, NULL);
 }
 
 static const struct pci_device_id cs5535[] = {
diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c
index f7c0e4e319ed..2d34b9145dcb 100644
--- a/drivers/ata/pata_cs5536.c
+++ b/drivers/ata/pata_cs5536.c
@@ -261,7 +261,7 @@ static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 		return -ENODEV;
 	}
 
-	return ata_pci_init_one(dev, ppi, &cs5536_sht);
+	return ata_pci_init_one(dev, ppi, &cs5536_sht, NULL);
 }
 
 static const struct pci_device_id cs5536[] = {
diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c
index cbd6670ea0de..ae14969e1dfe 100644
--- a/drivers/ata/pata_cypress.c
+++ b/drivers/ata/pata_cypress.c
@@ -136,7 +136,7 @@ static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *i
 	if (PCI_FUNC(pdev->devfn) != 1)
 		return -ENODEV;
 
-	return ata_pci_init_one(pdev, ppi, &cy82c693_sht);
+	return ata_pci_init_one(pdev, ppi, &cy82c693_sht, NULL);
 }
 
 static const struct pci_device_id cy82c693[] = {
diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index 0260edac2370..2f5b4848456a 100644
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -275,7 +275,7 @@ static int efar_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 		dev_printk(KERN_DEBUG, &pdev->dev,
 			   "version " DRV_VERSION "\n");
 
-	return ata_pci_init_one(pdev, ppi, &efar_sht);
+	return ata_pci_init_one(pdev, ppi, &efar_sht, NULL);
 }
 
 static const struct pci_device_id efar_pci_tbl[] = {
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index b62d398ed84b..c2d4923d4db7 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -356,9 +356,9 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 		.udma_mask = ATA_UDMA4,
 		.port_ops = &hpt366_port_ops
 	};
-	struct ata_port_info info = info_hpt366;
-	const struct ata_port_info *ppi[] = { &info, NULL };
+	const struct ata_port_info *ppi[] = { &info_hpt366, NULL };
 
+	void *hpriv = NULL;
 	u32 class_rev;
 	u32 reg1;
 	int rc;
@@ -383,17 +383,17 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	/* info_hpt366 is safe against re-entry so we can scribble on it */
 	switch((reg1 & 0x700) >> 8) {
 		case 5:
-			info.private_data = &hpt366_40;
+			hpriv = &hpt366_40;
 			break;
 		case 9:
-			info.private_data = &hpt366_25;
+			hpriv = &hpt366_25;
 			break;
 		default:
-			info.private_data = &hpt366_33;
+			hpriv = &hpt366_33;
 			break;
 	}
 	/* Now kick off ATA set up */
-	return ata_pci_init_one(dev, ppi, &hpt36x_sht);
+	return ata_pci_init_one(dev, ppi, &hpt36x_sht, hpriv);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index a43c19753669..fb37e3a161fc 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -831,10 +831,8 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	};
 
 	static const int MHz[4] = { 33, 40, 50, 66 };
-	const struct ata_port_info *port;
 	void *private_data = NULL;
-	struct ata_port_info port_info;
-	const struct ata_port_info *ppi[] = { &port_info, NULL };
+	const struct ata_port_info *ppi[] = { NULL, NULL };
 
 	u8 irqmask;
 	u32 class_rev;
@@ -866,17 +864,17 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 
 		switch(class_rev) {
 			case 3:
-				port = &info_hpt370;
+				ppi[0] = &info_hpt370;
 				chip_table = &hpt370;
 				prefer_dpll = 0;
 				break;
 			case 4:
-				port = &info_hpt370a;
+				ppi[0] = &info_hpt370a;
 				chip_table = &hpt370a;
 				prefer_dpll = 0;
 				break;
 			case 5:
-				port = &info_hpt372;
+				ppi[0] = &info_hpt372;
 				chip_table = &hpt372;
 				break;
 			default:
@@ -889,21 +887,21 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 				/* 372N if rev >= 2*/
 				if (class_rev >= 2)
 					return -ENODEV;
-				port = &info_hpt372;
+				ppi[0] = &info_hpt372;
 				chip_table = &hpt372a;
 				break;
 			case PCI_DEVICE_ID_TTI_HPT302:
 				/* 302N if rev > 1 */
 				if (class_rev > 1)
 					return -ENODEV;
-				port = &info_hpt372;
+				ppi[0] = &info_hpt372;
 				/* Check this */
 				chip_table = &hpt302;
 				break;
 			case PCI_DEVICE_ID_TTI_HPT371:
 				if (class_rev > 1)
 					return -ENODEV;
-				port = &info_hpt372;
+				ppi[0] = &info_hpt372;
 				chip_table = &hpt371;
 				/* Single channel device, master is not present
 				   but the BIOS (or us for non x86) must mark it
@@ -914,7 +912,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 				break;
 			case PCI_DEVICE_ID_TTI_HPT374:
 				chip_table = &hpt374;
-				port = &info_hpt374;
+				ppi[0] = &info_hpt374;
 				break;
 			default:
 				printk(KERN_ERR "pata_hpt37x: PCI table is bogus please report (%d).\n", dev->device);
@@ -993,7 +991,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 		int dpll, adjust;
 
 		/* Compute DPLL */
-		dpll = (port->udma_mask & 0xC0) ? 3 : 2;
+		dpll = (ppi[0]->udma_mask & 0xC0) ? 3 : 2;
 
 		f_low = (MHz[clock_slot] * 48) / MHz[dpll];
 		f_high = f_low + 2;
@@ -1033,19 +1031,16 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 		 *	about lack of UDMA133 support on lower clocks
  		 */
 
-		if (clock_slot < 2 && port == &info_hpt370)
-			port = &info_hpt370_33;
-		if (clock_slot < 2 && port == &info_hpt370a)
-			port = &info_hpt370a_33;
+		if (clock_slot < 2 && ppi[0] == &info_hpt370)
+			ppi[0] = &info_hpt370_33;
+		if (clock_slot < 2 && ppi[0] == &info_hpt370a)
+			ppi[0] = &info_hpt370a_33;
 		printk(KERN_INFO "pata_hpt37x: %s using %dMHz bus clock.\n",
 		       chip_table->name, MHz[clock_slot]);
 	}
 
 	/* Now kick off ATA set up */
-	port_info = *port;
-	port_info.private_data = private_data;
-
-	return ata_pci_init_one(dev, ppi, &hpt37x_sht);
+	return ata_pci_init_one(dev, ppi, &hpt37x_sht, private_data);
 }
 
 static const struct pci_device_id hpt37x[] = {
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index 2c178c30116c..c774be93ae04 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -458,8 +458,7 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 		.udma_mask = ATA_UDMA6,
 		.port_ops = &hpt3x2n_port_ops
 	};
-	struct ata_port_info port = info;
-	const struct ata_port_info *ppi[] = { &port, NULL };
+	const struct ata_port_info *ppi[] = { &info, NULL };
 
 	u8 irqmask;
 	u32 class_rev;
@@ -468,6 +467,7 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	unsigned int f_low, f_high;
 	int adjust;
 	unsigned long iobase = pci_resource_start(dev, 4);
+	void *hpriv = NULL;
 	int rc;
 
 	rc = pcim_enable_device(dev);
@@ -554,9 +554,8 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	       pci_mhz);
 	/* Set our private data up. We only need a few flags so we use
 	   it directly */
-	port.private_data = NULL;
 	if (pci_mhz > 60) {
-		port.private_data = (void *)PCI66;
+		hpriv = (void *)PCI66;
 		/*
 		 * On  HPT371N, if ATA clock is 66 MHz we must set bit 2 in
 		 * the MISC. register to stretch the UltraDMA Tss timing.
@@ -567,7 +566,7 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	}
 
 	/* Now kick off ATA set up */
-	return ata_pci_init_one(dev, ppi, &hpt3x2n_sht);
+	return ata_pci_init_one(dev, ppi, &hpt3x2n_sht, hpriv);
 }
 
 static const struct pci_device_id hpt3x2n[] = {
diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c
index 291a0d6e2434..d23a46b75028 100644
--- a/drivers/ata/pata_it8213.c
+++ b/drivers/ata/pata_it8213.c
@@ -287,7 +287,7 @@ static int it8213_init_one (struct pci_dev *pdev, const struct pci_device_id *en
 		dev_printk(KERN_DEBUG, &pdev->dev,
 			   "version " DRV_VERSION "\n");
 
-	return ata_pci_init_one(pdev, ppi, &it8213_sht);
+	return ata_pci_init_one(pdev, ppi, &it8213_sht, NULL);
 }
 
 static const struct pci_device_id it8213_pci_tbl[] = {
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 63c5cf0d1fee..6a8a4ddf5bfe 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -722,7 +722,7 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	else
 		ppi[0] = &info_smart;
 
-	return ata_pci_init_one(pdev, ppi, &it821x_sht);
+	return ata_pci_init_one(pdev, ppi, &it821x_sht, NULL);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 859e47a600cc..317f3474e0ba 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -105,20 +105,6 @@ static int jmicron_pre_reset(struct ata_link *link, unsigned long deadline)
 	return ata_std_prereset(link, deadline);
 }
 
-/**
- *	jmicron_error_handler - Setup and error handler
- *	@ap: Port to handle
- *
- *	LOCKING:
- *	None (inherited from caller).
- */
-
-static void jmicron_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, jmicron_pre_reset, ata_std_softreset, NULL,
-			   ata_std_postreset);
-}
-
 /* No PIO or DMA methods needed for this device */
 
 static struct scsi_host_template jmicron_sht = {
@@ -127,7 +113,7 @@ static struct scsi_host_template jmicron_sht = {
 
 static struct ata_port_operations jmicron_ops = {
 	.inherits		= &ata_bmdma_port_ops,
-	.error_handler		= jmicron_error_handler,
+	.prereset		= jmicron_pre_reset,
 };
 
 
@@ -158,7 +144,7 @@ static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *i
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
 
-	return ata_pci_init_one(pdev, ppi, &jmicron_sht);
+	return ata_pci_init_one(pdev, ppi, &jmicron_sht, NULL);
 }
 
 static const struct pci_device_id jmicron_pci_tbl[] = {
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index d8da4f344c0a..d38e64cd6097 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -75,20 +75,6 @@ static int marvell_cable_detect(struct ata_port *ap)
 	return 0;	/* Our BUG macro needs the right markup */
 }
 
-/**
- *	marvell_error_handler - Setup and error handler
- *	@ap: Port to handle
- *
- *	LOCKING:
- *	None (inherited from caller).
- */
-
-static void marvell_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, marvell_pre_reset, ata_std_softreset, NULL,
-			   ata_std_postreset);
-}
-
 /* No PIO or DMA methods needed for this device */
 
 static struct scsi_host_template marvell_sht = {
@@ -98,7 +84,7 @@ static struct scsi_host_template marvell_sht = {
 static struct ata_port_operations marvell_ops = {
 	.inherits		= &ata_bmdma_port_ops,
 	.cable_detect		= marvell_cable_detect,
-	.error_handler		= marvell_error_handler,
+	.prereset		= marvell_pre_reset,
 };
 
 
@@ -142,7 +128,7 @@ static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *i
 	if (pdev->device == 0x6101)
 		ppi[1] = &ata_dummy_port_info;
 
-	return ata_pci_init_one(pdev, ppi, &marvell_sht);
+	return ata_pci_init_one(pdev, ppi, &marvell_sht, NULL);
 }
 
 static const struct pci_device_id marvell_pci_tbl[] = {
diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c
index ae50a5e85cf1..349182840d24 100644
--- a/drivers/ata/pata_netcell.c
+++ b/drivers/ata/pata_netcell.c
@@ -71,7 +71,7 @@ static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 	ata_pci_clear_simplex(pdev);
 
 	/* And let the library code do the work */
-	return ata_pci_init_one(pdev, port_info, &netcell_sht);
+	return ata_pci_init_one(pdev, port_info, &netcell_sht, NULL);
 }
 
 static const struct pci_device_id netcell_pci_tbl[] = {
diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c
index 1bdca8f1e767..5a043e426480 100644
--- a/drivers/ata/pata_ns87410.c
+++ b/drivers/ata/pata_ns87410.c
@@ -163,7 +163,7 @@ static int ns87410_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 		.port_ops = &ns87410_port_ops
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
-	return ata_pci_init_one(dev, ppi, &ns87410_sht);
+	return ata_pci_init_one(dev, ppi, &ns87410_sht, NULL);
 }
 
 static const struct pci_device_id ns87410[] = {
diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c
index 42508940e4a9..cdd79d6fc0ee 100644
--- a/drivers/ata/pata_ns87415.c
+++ b/drivers/ata/pata_ns87415.c
@@ -375,7 +375,7 @@ static int ns87415_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 	pci_write_config_byte(pdev, 0x55, 0xEE);
 	/* Select PIO0 8bit clocking */
 	pci_write_config_byte(pdev, 0x54, 0xB7);
-	return ata_pci_init_one(pdev, ppi, &ns87415_sht);
+	return ata_pci_init_one(pdev, ppi, &ns87415_sht, NULL);
 }
 
 static const struct pci_device_id ns87415_pci_tbl[] = {
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index 9e3afadbd04a..7001b756819e 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -263,7 +263,7 @@ static int oldpiix_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 		dev_printk(KERN_DEBUG, &pdev->dev,
 			   "version " DRV_VERSION "\n");
 
-	return ata_pci_init_one(pdev, ppi, &oldpiix_sht);
+	return ata_pci_init_one(pdev, ppi, &oldpiix_sht, NULL);
 }
 
 static const struct pci_device_id oldpiix_pci_tbl[] = {
diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c
index 8601d9c3cb39..5a5f20e03fc0 100644
--- a/drivers/ata/pata_opti.c
+++ b/drivers/ata/pata_opti.c
@@ -188,7 +188,7 @@ static int opti_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");
 
-	return ata_pci_init_one(dev, ppi, &opti_sht);
+	return ata_pci_init_one(dev, ppi, &opti_sht, NULL);
 }
 
 static const struct pci_device_id opti[] = {
diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index c376f9ef77c8..ba2819ff964b 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -445,7 +445,7 @@ static int optidma_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	if (optiplus_with_udma(dev))
 		ppi[0] = &info_82c700_udma;
 
-	return ata_pci_init_one(dev, ppi, &optidma_sht);
+	return ata_pci_init_one(dev, ppi, &optidma_sht, NULL);
 }
 
 static const struct pci_device_id optidma[] = {
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index 5545fbab6a7e..8214100e3ac1 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -324,7 +324,7 @@ static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id
 				return -ENODEV;
 		}
 	}
-	return ata_pci_init_one(dev, ppi, &pdc202xx_sht);
+	return ata_pci_init_one(dev, ppi, &pdc202xx_sht, NULL);
 }
 
 static const struct pci_device_id pdc202xx[] = {
diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index 145d5ba92795..9ab84fc3798d 100644
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -228,7 +228,7 @@ static int radisys_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 		dev_printk(KERN_DEBUG, &pdev->dev,
 			   "version " DRV_VERSION "\n");
 
-	return ata_pci_init_one(pdev, ppi, &radisys_sht);
+	return ata_pci_init_one(pdev, ppi, &radisys_sht, NULL);
 }
 
 static const struct pci_device_id radisys_pci_tbl[] = {
diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index 04be6aee4354..462b72a31280 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -99,7 +99,7 @@ static int rz1000_init_one (struct pci_dev *pdev, const struct pci_device_id *en
 		printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
 
 	if (rz1000_fifo_disable(pdev) == 0)
-		return ata_pci_init_one(pdev, ppi, &rz1000_sht);
+		return ata_pci_init_one(pdev, ppi, &rz1000_sht, NULL);
 
 	printk(KERN_ERR DRV_NAME ": failed to disable read-ahead on chipset..\n");
 	/* Not safe to use so skip */
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index 38c7fb0bebe9..42efacf73c79 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -213,7 +213,7 @@ static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	/* Can't enable port 2 yet, see top comments */
 	const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
 
-	return ata_pci_init_one(dev, ppi, &sc1200_sht);
+	return ata_pci_init_one(dev, ppi, &sc1200_sht, NULL);
 }
 
 static const struct pci_device_id sc1200[] = {
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index 515b5b70a555..2f4f9b0f89de 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -461,7 +461,7 @@ static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id
 	if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE)
 		ata_pci_clear_simplex(pdev);
 
-	return ata_pci_init_one(pdev, ppi, &serverworks_sht);
+	return ata_pci_init_one(pdev, ppi, &serverworks_sht, NULL);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 5313deeffa6d..63fafc6d6da3 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -362,7 +362,7 @@ static int __devinit sil680_init_one(struct pci_dev *pdev,
 				 &sil680_sht);
 
 use_ioports:
-	return ata_pci_init_one(pdev, ppi, &sil680_sht);
+	return ata_pci_init_one(pdev, ppi, &sil680_sht, NULL);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index 32be13ba5f06..28abfc26e7a4 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -690,8 +690,7 @@ static void sis_fixup(struct pci_dev *pdev, struct sis_chipset *sis)
 static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version;
-	struct ata_port_info port;
-	const struct ata_port_info *ppi[] = { &port, NULL };
+	const struct ata_port_info *ppi[] = { NULL, NULL };
 	struct pci_dev *host = NULL;
 	struct sis_chipset *chipset = NULL;
 	struct sis_chipset *sets;
@@ -831,12 +830,11 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (chipset == NULL)
 		return -ENODEV;
 
-	port = *chipset->info;
-	port.private_data = chipset;
+	ppi[0] = chipset->info;
 
 	sis_fixup(pdev, chipset);
 
-	return ata_pci_init_one(pdev, ppi, &sis_sht);
+	return ata_pci_init_one(pdev, ppi, &sis_sht, chipset);
 }
 
 static const struct pci_device_id sis_pci_tbl[] = {
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index 2d14b2505c7d..1d97f920bd2b 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -323,7 +323,7 @@ static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id
 	val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16;
 	pci_write_config_dword(dev, 0x40, val);
 
-	return ata_pci_init_one(dev, ppi, &sl82c105_sht);
+	return ata_pci_init_one(dev, ppi, &sl82c105_sht, NULL);
 }
 
 static const struct pci_device_id sl82c105[] = {
diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c
index 86dc66c37389..f07b0e5df222 100644
--- a/drivers/ata/pata_triflex.c
+++ b/drivers/ata/pata_triflex.c
@@ -206,7 +206,7 @@ static int triflex_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");
 
-	return ata_pci_init_one(dev, ppi, &triflex_sht);
+	return ata_pci_init_one(dev, ppi, &triflex_sht, NULL);
 }
 
 static const struct pci_device_id triflex[] = {
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index e66bb85ad3d1..f4092cbd566f 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -442,8 +442,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		.udma_mask = ATA_UDMA6,	/* FIXME: should check north bridge */
 		.port_ops = &via_port_ops
 	};
-	struct ata_port_info type;
-	const struct ata_port_info *ppi[] = { &type, NULL };
+	const struct ata_port_info *ppi[] = { NULL, NULL };
 	struct pci_dev *isa = NULL;
 	const struct via_isa_bridge *config;
 	static int printed_version;
@@ -491,25 +490,25 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	switch(config->flags & VIA_UDMA) {
 		case VIA_UDMA_NONE:
 			if (config->flags & VIA_NO_UNMASK)
-				type = via_mwdma_info_borked;
+				ppi[0] = &via_mwdma_info_borked;
 			else
-				type = via_mwdma_info;
+				ppi[0] = &via_mwdma_info;
 			break;
 		case VIA_UDMA_33:
-			type = via_udma33_info;
+			ppi[0] = &via_udma33_info;
 			break;
 		case VIA_UDMA_66:
-			type = via_udma66_info;
+			ppi[0] = &via_udma66_info;
 			/* The 66 MHz devices require we enable the clock */
 			pci_read_config_dword(pdev, 0x50, &timing);
 			timing |= 0x80008;
 			pci_write_config_dword(pdev, 0x50, timing);
 			break;
 		case VIA_UDMA_100:
-			type = via_udma100_info;
+			ppi[0] = &via_udma100_info;
 			break;
 		case VIA_UDMA_133:
-			type = via_udma133_info;
+			ppi[0] = &via_udma133_info;
 			break;
 		default:
 			WARN_ON(1);
@@ -524,9 +523,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	}
 
 	/* We have established the device type, now fire it up */
-	type.private_data = (void *)config;
-
-	return ata_pci_init_one(pdev, ppi, &via_sht);
+	return ata_pci_init_one(pdev, ppi, &via_sht, (void *)config);
 }
 
 #ifdef CONFIG_PM
-- 
cgit v1.2.2


From 959471936241bd83da7d0a76411cef6772140fe6 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Tue, 25 Mar 2008 12:22:49 +0900
Subject: libata: kill port_info->sht and ->irq_handler

libata core layer doesn't care about sht or ->irq_handler.  Those are
only of interest to the LLD during initialization.  This is confusing
and has caused several drivers to have duplicate unused initializers
for these fields.

Currently only sata_nv uses these fields.  Make sata_nv use
->private_data, which is supposed to carry LLD-specific information,
instead and kill ->sht and ->irq_handler.  nv_pi_priv structure is
defined and struct literals are used to initialize private_data.
Notational overhead is negligible.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/sata_nv.c | 29 +++++++++++++++++------------
 1 file changed, 17 insertions(+), 12 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 7b7ba0e26903..5637b082bc85 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -466,58 +466,61 @@ static struct ata_port_operations nv_swncq_ops = {
 	.port_start		= nv_swncq_port_start,
 };
 
+struct nv_pi_priv {
+	irq_handler_t			irq_handler;
+	struct scsi_host_template	*sht;
+};
+
+#define NV_PI_PRIV(_irq_handler, _sht) \
+	&(struct nv_pi_priv){ .irq_handler = _irq_handler, .sht = _sht }
+
 static const struct ata_port_info nv_port_info[] = {
 	/* generic */
 	{
-		.sht		= &nv_sht,
 		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
 		.pio_mask	= NV_PIO_MASK,
 		.mwdma_mask	= NV_MWDMA_MASK,
 		.udma_mask	= NV_UDMA_MASK,
 		.port_ops	= &nv_generic_ops,
-		.irq_handler	= nv_generic_interrupt,
+		.private_data	= NV_PI_PRIV(nv_generic_interrupt, &nv_sht),
 	},
 	/* nforce2/3 */
 	{
-		.sht		= &nv_sht,
 		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
 		.pio_mask	= NV_PIO_MASK,
 		.mwdma_mask	= NV_MWDMA_MASK,
 		.udma_mask	= NV_UDMA_MASK,
 		.port_ops	= &nv_nf2_ops,
-		.irq_handler	= nv_nf2_interrupt,
+		.private_data	= NV_PI_PRIV(nv_nf2_interrupt, &nv_sht),
 	},
 	/* ck804 */
 	{
-		.sht		= &nv_sht,
 		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
 		.pio_mask	= NV_PIO_MASK,
 		.mwdma_mask	= NV_MWDMA_MASK,
 		.udma_mask	= NV_UDMA_MASK,
 		.port_ops	= &nv_ck804_ops,
-		.irq_handler	= nv_ck804_interrupt,
+		.private_data	= NV_PI_PRIV(nv_ck804_interrupt, &nv_sht),
 	},
 	/* ADMA */
 	{
-		.sht		= &nv_adma_sht,
 		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 				  ATA_FLAG_MMIO | ATA_FLAG_NCQ,
 		.pio_mask	= NV_PIO_MASK,
 		.mwdma_mask	= NV_MWDMA_MASK,
 		.udma_mask	= NV_UDMA_MASK,
 		.port_ops	= &nv_adma_ops,
-		.irq_handler	= nv_adma_interrupt,
+		.private_data	= NV_PI_PRIV(nv_adma_interrupt, &nv_adma_sht),
 	},
 	/* SWNCQ */
 	{
-		.sht		= &nv_swncq_sht,
 		.flags	        = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 				  ATA_FLAG_NCQ,
 		.pio_mask	= NV_PIO_MASK,
 		.mwdma_mask	= NV_MWDMA_MASK,
 		.udma_mask	= NV_UDMA_MASK,
 		.port_ops	= &nv_swncq_ops,
-		.irq_handler	= nv_swncq_interrupt,
+		.private_data	= NV_PI_PRIV(nv_swncq_interrupt, &nv_swncq_sht),
 	},
 };
 
@@ -2316,6 +2319,7 @@ static int nv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version;
 	const struct ata_port_info *ppi[] = { NULL, NULL };
+	struct nv_pi_priv *ipriv;
 	struct ata_host *host;
 	struct nv_host_priv *hpriv;
 	int rc;
@@ -2352,6 +2356,7 @@ static int nv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	}
 
 	ppi[0] = &nv_port_info[type];
+	ipriv = ppi[0]->private_data;
 	rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
 	if (rc)
 		return rc;
@@ -2390,8 +2395,8 @@ static int nv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		nv_swncq_host_init(host);
 
 	pci_set_master(pdev);
-	return ata_host_activate(host, pdev->irq, ppi[0]->irq_handler,
-				 IRQF_SHARED, ppi[0]->sht);
+	return ata_host_activate(host, pdev->irq, ipriv->irq_handler,
+				 IRQF_SHARED, ipriv->sht);
 }
 
 #ifdef CONFIG_PM
-- 
cgit v1.2.2


From a1efdaba2dbd6fb89e23a87b66d3f4dd92c9f5af Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Tue, 25 Mar 2008 12:22:50 +0900
Subject: libata: make reset related methods proper port operations

Currently reset methods are not specified directly in the
ata_port_operations table.  If a LLD wants to use custom reset
methods, it should construct and use a error_handler which uses those
reset methods.  It's done this way for two reasons.

First, the ops table already contained too many methods and adding
four more of them would noticeably increase the amount of necessary
boilerplate code all over low level drivers.

Second, as ->error_handler uses those reset methods, it can get
confusing.  ie. By overriding ->error_handler, those reset ops can be
made useless making layering a bit hazy.

Now that ops table uses inheritance, the first problem doesn't exist
anymore.  The second isn't completely solved but is relieved by
providing default values - most drivers can just override what it has
implemented and don't have to concern itself about higher level
callbacks.  In fact, there currently is no driver which actually
modifies error handling behavior.  Drivers which override
->error_handler just wraps the standard error handler only to prepare
the controller for EH.  I don't think making ops layering strict has
any noticeable benefit.

This patch makes ->prereset, ->softreset, ->hardreset, ->postreset and
their PMP counterparts propoer ops.  Default ops are provided in the
base ops tables and drivers are converted to override individual reset
methods instead of creating custom error_handler.

* ata_std_error_handler() doesn't use sata_std_hardreset() if SCRs
  aren't accessible.  sata_promise doesn't need to use separate
  error_handlers for PATA and SATA anymore.

* softreset is broken for sata_inic162x and sata_sx4.  As libata now
  always prefers hardreset, this doesn't really matter but the ops are
  forced to NULL using ATA_OP_NULL for documentation purpose.

* pata_hpt374 needs to use different prereset for the first and second
  PCI functions.  This used to be done by branching from
  hpt374_error_handler().  The proper way to do this is to use
  separate ops and port_info tables for each function.  Converted.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/ahci.c          | 53 +++++++++++++--------------------------
 drivers/ata/ata_piix.c      | 21 ++++------------
 drivers/ata/libata-core.c   | 14 +++++++++--
 drivers/ata/libata-eh.c     | 25 +++++++++++++++++++
 drivers/ata/libata-pmp.c    | 47 ++++++++--------------------------
 drivers/ata/libata-sff.c    | 49 ++++++++++++------------------------
 drivers/ata/pata_artop.c    | 34 ++-----------------------
 drivers/ata/pata_atiixp.c   |  7 +-----
 drivers/ata/pata_bf54x.c    | 14 ++---------
 drivers/ata/pata_efar.c     | 15 +----------
 drivers/ata/pata_hpt37x.c   | 61 +++++++++++++++------------------------------
 drivers/ata/pata_hpt3x2n.c  | 16 ++----------
 drivers/ata/pata_icside.c   |  8 +-----
 drivers/ata/pata_it8213.c   | 15 +----------
 drivers/ata/pata_mpc52xx.c  | 10 --------
 drivers/ata/pata_mpiix.c    | 16 +-----------
 drivers/ata/pata_ns87410.c  | 16 +-----------
 drivers/ata/pata_oldpiix.c  | 16 +-----------
 drivers/ata/pata_opti.c     | 17 +------------
 drivers/ata/pata_optidma.c  | 17 +------------
 drivers/ata/pata_pdc2027x.c | 19 ++------------
 drivers/ata/pata_scc.c      | 15 +++--------
 drivers/ata/pata_sis.c      | 15 +----------
 drivers/ata/pata_sl82c105.c |  8 +-----
 drivers/ata/pata_triflex.c  |  7 +-----
 drivers/ata/pata_via.c      | 14 +----------
 drivers/ata/pdc_adma.c      | 11 +++-----
 drivers/ata/sata_fsl.c      | 12 +--------
 drivers/ata/sata_inic162x.c |  5 ++--
 drivers/ata/sata_mv.c       | 16 ++++++------
 drivers/ata/sata_nv.c       | 17 ++++---------
 drivers/ata/sata_promise.c  | 22 +++-------------
 drivers/ata/sata_qstor.c    |  6 +++--
 drivers/ata/sata_sil24.c    | 18 +++++++++----
 drivers/ata/sata_via.c      | 10 ++------
 35 files changed, 174 insertions(+), 492 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index dacb3ef0c3e6..3efa9904f7a0 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -252,9 +252,18 @@ static void ahci_freeze(struct ata_port *ap);
 static void ahci_thaw(struct ata_port *ap);
 static void ahci_pmp_attach(struct ata_port *ap);
 static void ahci_pmp_detach(struct ata_port *ap);
+static int ahci_softreset(struct ata_link *link, unsigned int *class,
+			  unsigned long deadline);
+static int ahci_hardreset(struct ata_link *link, unsigned int *class,
+			  unsigned long deadline);
+static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
+				 unsigned long deadline);
+static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
+				unsigned long deadline);
+static void ahci_postreset(struct ata_link *link, unsigned int *class);
+static int ahci_pmp_softreset(struct ata_link *link, unsigned int *class,
+			      unsigned long deadline);
 static void ahci_error_handler(struct ata_port *ap);
-static void ahci_vt8251_error_handler(struct ata_port *ap);
-static void ahci_p5wdh_error_handler(struct ata_port *ap);
 static void ahci_post_internal_cmd(struct ata_queued_cmd *qc);
 static int ahci_port_resume(struct ata_port *ap);
 static void ahci_dev_config(struct ata_device *dev);
@@ -293,6 +302,10 @@ static struct ata_port_operations ahci_ops = {
 
 	.freeze			= ahci_freeze,
 	.thaw			= ahci_thaw,
+	.softreset		= ahci_softreset,
+	.hardreset		= ahci_hardreset,
+	.postreset		= ahci_postreset,
+	.pmp_softreset		= ahci_pmp_softreset,
 	.error_handler		= ahci_error_handler,
 	.post_internal_cmd	= ahci_post_internal_cmd,
 	.dev_config		= ahci_dev_config,
@@ -314,12 +327,12 @@ static struct ata_port_operations ahci_ops = {
 
 static struct ata_port_operations ahci_vt8251_ops = {
 	.inherits		= &ahci_ops,
-	.error_handler		= ahci_vt8251_error_handler,
+	.hardreset		= ahci_vt8251_hardreset,
 };
 
 static struct ata_port_operations ahci_p5wdh_ops = {
 	.inherits		= &ahci_ops,
-	.error_handler		= ahci_p5wdh_error_handler,
+	.hardreset		= ahci_p5wdh_hardreset,
 };
 
 #define AHCI_HFLAGS(flags)	.private_data	= (void *)(flags)
@@ -1796,37 +1809,7 @@ static void ahci_error_handler(struct ata_port *ap)
 		ahci_start_engine(ap);
 	}
 
-	/* perform recovery */
-	sata_pmp_do_eh(ap, ata_std_prereset, ahci_softreset,
-		       ahci_hardreset, ahci_postreset,
-		       sata_pmp_std_prereset, ahci_pmp_softreset,
-		       sata_pmp_std_hardreset, sata_pmp_std_postreset);
-}
-
-static void ahci_vt8251_error_handler(struct ata_port *ap)
-{
-	if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
-		/* restart engine */
-		ahci_stop_engine(ap);
-		ahci_start_engine(ap);
-	}
-
-	/* perform recovery */
-	ata_do_eh(ap, ata_std_prereset, ahci_softreset, ahci_vt8251_hardreset,
-		  ahci_postreset);
-}
-
-static void ahci_p5wdh_error_handler(struct ata_port *ap)
-{
-	if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
-		/* restart engine */
-		ahci_stop_engine(ap);
-		ahci_start_engine(ap);
-	}
-
-	/* perform recovery */
-	ata_do_eh(ap, ata_std_prereset, ahci_softreset, ahci_p5wdh_hardreset,
-		  ahci_postreset);
+	sata_pmp_error_handler(ap);
 }
 
 static void ahci_post_internal_cmd(struct ata_queued_cmd *qc)
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index bb46b61a7c6b..eafb984313f6 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -162,15 +162,16 @@ struct piix_host_priv {
 
 static int piix_init_one(struct pci_dev *pdev,
 			 const struct pci_device_id *ent);
-static void piix_pata_error_handler(struct ata_port *ap);
+static int piix_pata_prereset(struct ata_link *link, unsigned long deadline);
 static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev);
 static void piix_set_dmamode(struct ata_port *ap, struct ata_device *adev);
 static void ich_set_dmamode(struct ata_port *ap, struct ata_device *adev);
 static int ich_pata_cable_detect(struct ata_port *ap);
 static u8 piix_vmw_bmdma_status(struct ata_port *ap);
+static int piix_sidpr_hardreset(struct ata_link *link, unsigned int *class,
+				unsigned long deadline);
 static int piix_sidpr_scr_read(struct ata_port *ap, unsigned int reg, u32 *val);
 static int piix_sidpr_scr_write(struct ata_port *ap, unsigned int reg, u32 val);
-static void piix_sidpr_error_handler(struct ata_port *ap);
 #ifdef CONFIG_PM
 static int piix_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
 static int piix_pci_device_resume(struct pci_dev *pdev);
@@ -299,7 +300,7 @@ static struct ata_port_operations piix_pata_ops = {
 	.cable_detect		= ata_cable_40wire,
 	.set_piomode		= piix_set_piomode,
 	.set_dmamode		= piix_set_dmamode,
-	.error_handler		= piix_pata_error_handler,
+	.prereset		= piix_pata_prereset,
 };
 
 static struct ata_port_operations piix_vmw_ops = {
@@ -319,9 +320,9 @@ static struct ata_port_operations piix_sata_ops = {
 
 static struct ata_port_operations piix_sidpr_sata_ops = {
 	.inherits		= &piix_sata_ops,
+	.hardreset		= piix_sidpr_hardreset,
 	.scr_read		= piix_sidpr_scr_read,
 	.scr_write		= piix_sidpr_scr_write,
-	.error_handler		= piix_sidpr_error_handler,
 };
 
 static const struct piix_map_db ich5_map_db = {
@@ -645,12 +646,6 @@ static int piix_pata_prereset(struct ata_link *link, unsigned long deadline)
 	return ata_std_prereset(link, deadline);
 }
 
-static void piix_pata_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, piix_pata_prereset, ata_std_softreset, NULL,
-			   ata_std_postreset);
-}
-
 /**
  *	piix_set_piomode - Initialize host controller PATA PIO timings
  *	@ap: Port whose timings we are configuring
@@ -1057,12 +1052,6 @@ static int piix_sidpr_hardreset(struct ata_link *link, unsigned int *class,
 	return -EAGAIN;
 }
 
-static void piix_sidpr_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset,
-			   piix_sidpr_hardreset, ata_std_postreset);
-}
-
 #ifdef CONFIG_PM
 static int piix_broken_suspend(void)
 {
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index aa6bcd79d60a..345f4a6865a8 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -76,6 +76,10 @@ const unsigned long sata_deb_timing_long[]		= { 100, 2000, 5000 };
 
 const struct ata_port_operations ata_base_port_ops = {
 	.irq_clear		= ata_noop_irq_clear,
+	.prereset		= ata_std_prereset,
+	.hardreset		= sata_std_hardreset,
+	.postreset		= ata_std_postreset,
+	.error_handler		= ata_std_error_handler,
 };
 
 const struct ata_port_operations sata_port_ops = {
@@ -87,6 +91,11 @@ const struct ata_port_operations sata_port_ops = {
 
 const struct ata_port_operations sata_pmp_port_ops = {
 	.inherits		= &sata_port_ops,
+
+	.pmp_prereset		= sata_pmp_std_prereset,
+	.pmp_hardreset		= sata_pmp_std_hardreset,
+	.pmp_postreset		= sata_pmp_std_postreset,
+	.error_handler		= sata_pmp_error_handler,
 };
 
 const struct ata_port_operations ata_sff_port_ops = {
@@ -97,6 +106,7 @@ const struct ata_port_operations ata_sff_port_ops = {
 
 	.freeze			= ata_bmdma_freeze,
 	.thaw			= ata_bmdma_thaw,
+	.softreset		= ata_std_softreset,
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
 
@@ -7935,7 +7945,6 @@ EXPORT_SYMBOL_GPL(ata_bmdma_status);
 EXPORT_SYMBOL_GPL(ata_bmdma_stop);
 EXPORT_SYMBOL_GPL(ata_bmdma_freeze);
 EXPORT_SYMBOL_GPL(ata_bmdma_thaw);
-EXPORT_SYMBOL_GPL(ata_bmdma_drive_eh);
 EXPORT_SYMBOL_GPL(ata_bmdma_error_handler);
 EXPORT_SYMBOL_GPL(ata_bmdma_post_internal_cmd);
 EXPORT_SYMBOL_GPL(ata_port_probe);
@@ -8005,7 +8014,7 @@ EXPORT_SYMBOL_GPL(sata_pmp_qc_defer_cmd_switch);
 EXPORT_SYMBOL_GPL(sata_pmp_std_prereset);
 EXPORT_SYMBOL_GPL(sata_pmp_std_hardreset);
 EXPORT_SYMBOL_GPL(sata_pmp_std_postreset);
-EXPORT_SYMBOL_GPL(sata_pmp_do_eh);
+EXPORT_SYMBOL_GPL(sata_pmp_error_handler);
 
 EXPORT_SYMBOL_GPL(__ata_ehi_push_desc);
 EXPORT_SYMBOL_GPL(ata_ehi_push_desc);
@@ -8024,6 +8033,7 @@ EXPORT_SYMBOL_GPL(ata_eh_thaw_port);
 EXPORT_SYMBOL_GPL(ata_eh_qc_complete);
 EXPORT_SYMBOL_GPL(ata_eh_qc_retry);
 EXPORT_SYMBOL_GPL(ata_do_eh);
+EXPORT_SYMBOL_GPL(ata_std_error_handler);
 EXPORT_SYMBOL_GPL(ata_irq_on);
 EXPORT_SYMBOL_GPL(ata_dev_try_classify);
 
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 0d0a2c0ab9e7..ec32082356cb 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2814,6 +2814,7 @@ void ata_eh_finish(struct ata_port *ap)
 /**
  *	ata_do_eh - do standard error handling
  *	@ap: host port to handle error for
+ *
  *	@prereset: prereset method (can be NULL)
  *	@softreset: softreset method (can be NULL)
  *	@hardreset: hardreset method (can be NULL)
@@ -2844,6 +2845,30 @@ void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset,
 	ata_eh_finish(ap);
 }
 
+/**
+ *	ata_std_error_handler - standard error handler
+ *	@ap: host port to handle error for
+ *
+ *	Standard error handler
+ *
+ *	LOCKING:
+ *	Kernel thread context (may sleep).
+ */
+void ata_std_error_handler(struct ata_port *ap)
+{
+	struct ata_port_operations *ops = ap->ops;
+	ata_reset_fn_t hardreset = ops->hardreset;
+
+	/* sata_std_hardreset is inherited to all drivers from
+	 * ata_base_port_ops.  Ignore it if SCR access is not
+	 * available.
+	 */
+	if (hardreset == sata_std_hardreset && !sata_scr_valid(&ap->link))
+		hardreset = NULL;
+
+	ata_do_eh(ap, ops->prereset, ops->softreset, hardreset, ops->postreset);
+}
+
 #ifdef CONFIG_PM
 /**
  *	ata_eh_handle_port_suspend - perform port suspend operation
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index 39e036c8a2bc..a7cb1498c9b2 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -962,14 +962,6 @@ static int sata_pmp_handle_link_fail(struct ata_link *link, int *link_tries)
 /**
  *	sata_pmp_eh_recover - recover PMP-enabled port
  *	@ap: ATA port to recover
- *	@prereset: prereset method (can be NULL)
- *	@softreset: softreset method
- *	@hardreset: hardreset method
- *	@postreset: postreset method (can be NULL)
- *	@pmp_prereset: PMP prereset method (can be NULL)
- *	@pmp_softreset: PMP softreset method (can be NULL)
- *	@pmp_hardreset: PMP hardreset method (can be NULL)
- *	@pmp_postreset: PMP postreset method (can be NULL)
  *
  *	Drive EH recovery operation for PMP enabled port @ap.  This
  *	function recovers host and PMP ports with proper retrials and
@@ -982,12 +974,9 @@ static int sata_pmp_handle_link_fail(struct ata_link *link, int *link_tries)
  *	RETURNS:
  *	0 on success, -errno on failure.
  */
-static int sata_pmp_eh_recover(struct ata_port *ap,
-		ata_prereset_fn_t prereset, ata_reset_fn_t softreset,
-		ata_reset_fn_t hardreset, ata_postreset_fn_t postreset,
-		ata_prereset_fn_t pmp_prereset, ata_reset_fn_t pmp_softreset,
-		ata_reset_fn_t pmp_hardreset, ata_postreset_fn_t pmp_postreset)
+static int sata_pmp_eh_recover(struct ata_port *ap)
 {
+	struct ata_port_operations *ops = ap->ops;
 	int pmp_tries, link_tries[SATA_PMP_MAX_PORTS];
 	struct ata_link *pmp_link = &ap->link;
 	struct ata_device *pmp_dev = pmp_link->device;
@@ -1005,8 +994,8 @@ static int sata_pmp_eh_recover(struct ata_port *ap,
  retry:
 	/* PMP attached? */
 	if (!ap->nr_pmp_links) {
-		rc = ata_eh_recover(ap, prereset, softreset, hardreset,
-				    postreset, NULL);
+		rc = ata_eh_recover(ap, ops->prereset, ops->softreset,
+				    ops->hardreset, ops->postreset, NULL);
 		if (rc) {
 			ata_link_for_each_dev(dev, &ap->link)
 				ata_dev_disable(dev);
@@ -1024,8 +1013,8 @@ static int sata_pmp_eh_recover(struct ata_port *ap,
 	}
 
 	/* recover pmp */
-	rc = sata_pmp_eh_recover_pmp(ap, prereset, softreset, hardreset,
-				     postreset);
+	rc = sata_pmp_eh_recover_pmp(ap, ops->prereset, ops->softreset,
+				     ops->hardreset, ops->postreset);
 	if (rc)
 		goto pmp_fail;
 
@@ -1035,8 +1024,8 @@ static int sata_pmp_eh_recover(struct ata_port *ap,
 		goto pmp_fail;
 
 	/* recover links */
-	rc = ata_eh_recover(ap, pmp_prereset, pmp_softreset, pmp_hardreset,
-			    pmp_postreset, &link);
+	rc = ata_eh_recover(ap, ops->pmp_prereset, ops->pmp_softreset,
+			    ops->pmp_hardreset, ops->pmp_postreset, &link);
 	if (rc)
 		goto link_fail;
 
@@ -1132,16 +1121,8 @@ static int sata_pmp_eh_recover(struct ata_port *ap,
 }
 
 /**
- *	sata_pmp_do_eh - do standard error handling for PMP-enabled host
+ *	sata_pmp_error_handler - do standard error handling for PMP-enabled host
  *	@ap: host port to handle error for
- *	@prereset: prereset method (can be NULL)
- *	@softreset: softreset method
- *	@hardreset: hardreset method
- *	@postreset: postreset method (can be NULL)
- *	@pmp_prereset: PMP prereset method (can be NULL)
- *	@pmp_softreset: PMP softreset method (can be NULL)
- *	@pmp_hardreset: PMP hardreset method (can be NULL)
- *	@pmp_postreset: PMP postreset method (can be NULL)
  *
  *	Perform standard error handling sequence for PMP-enabled host
  *	@ap.
@@ -1149,16 +1130,10 @@ static int sata_pmp_eh_recover(struct ata_port *ap,
  *	LOCKING:
  *	Kernel thread context (may sleep).
  */
-void sata_pmp_do_eh(struct ata_port *ap,
-		ata_prereset_fn_t prereset, ata_reset_fn_t softreset,
-		ata_reset_fn_t hardreset, ata_postreset_fn_t postreset,
-		ata_prereset_fn_t pmp_prereset, ata_reset_fn_t pmp_softreset,
-		ata_reset_fn_t pmp_hardreset, ata_postreset_fn_t pmp_postreset)
+void sata_pmp_error_handler(struct ata_port *ap)
 {
 	ata_eh_autopsy(ap);
 	ata_eh_report(ap);
-	sata_pmp_eh_recover(ap, prereset, softreset, hardreset, postreset,
-			    pmp_prereset, pmp_softreset, pmp_hardreset,
-			    pmp_postreset);
+	sata_pmp_eh_recover(ap);
 	ata_eh_finish(ap);
 }
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 6223ec042c80..2a229a1d3211 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -396,28 +396,21 @@ void ata_bmdma_thaw(struct ata_port *ap)
 }
 
 /**
- *	ata_bmdma_drive_eh - Perform EH with given methods for BMDMA controller
+ *	ata_bmdma_error_handler - Stock error handler for BMDMA controller
  *	@ap: port to handle error for
- *	@prereset: prereset method (can be NULL)
- *	@softreset: softreset method (can be NULL)
- *	@hardreset: hardreset method (can be NULL)
- *	@postreset: postreset method (can be NULL)
  *
- *	Handle error for ATA BMDMA controller.  It can handle both
+ *	Stock error handler for BMDMA controller.  It can handle both
  *	PATA and SATA controllers.  Many controllers should be able to
  *	use this EH as-is or with some added handling before and
  *	after.
  *
- *	This function is intended to be used for constructing
- *	->error_handler callback by low level drivers.
- *
  *	LOCKING:
  *	Kernel thread context (may sleep)
  */
-void ata_bmdma_drive_eh(struct ata_port *ap, ata_prereset_fn_t prereset,
-			ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
-			ata_postreset_fn_t postreset)
+void ata_bmdma_error_handler(struct ata_port *ap)
 {
+	ata_reset_fn_t softreset = ap->ops->softreset;
+	ata_reset_fn_t hardreset = ap->ops->hardreset;
 	struct ata_queued_cmd *qc;
 	unsigned long flags;
 	int thaw = 0;
@@ -460,29 +453,19 @@ void ata_bmdma_drive_eh(struct ata_port *ap, ata_prereset_fn_t prereset,
 		ata_eh_thaw_port(ap);
 
 	/* PIO and DMA engines have been stopped, perform recovery */
-	ata_do_eh(ap, prereset, softreset, hardreset, postreset);
-}
-
-/**
- *	ata_bmdma_error_handler - Stock error handler for BMDMA controller
- *	@ap: port to handle error for
- *
- *	Stock error handler for BMDMA controller.
- *
- *	LOCKING:
- *	Kernel thread context (may sleep)
- */
-void ata_bmdma_error_handler(struct ata_port *ap)
-{
-	ata_reset_fn_t softreset = NULL, hardreset = NULL;
 
-	if (ap->ioaddr.ctl_addr)
-		softreset = ata_std_softreset;
-	if (sata_scr_valid(&ap->link))
-		hardreset = sata_std_hardreset;
+	/* ata_std_softreset and sata_std_hardreset are inherited to
+	 * all SFF drivers from ata_sff_port_ops.  Ignore softreset if
+	 * ctl isn't accessible.  Ignore hardreset if SCR access isn't
+	 * available.
+	 */
+	if (softreset == ata_std_softreset && !ap->ioaddr.ctl_addr)
+		softreset = NULL;
+	if (hardreset == sata_std_hardreset && !sata_scr_valid(&ap->link))
+		hardreset = NULL;
 
-	ata_bmdma_drive_eh(ap, ata_std_prereset, softreset, hardreset,
-			   ata_std_postreset);
+	ata_do_eh(ap, ap->ops->prereset, softreset, hardreset,
+		  ap->ops->postreset);
 }
 
 /**
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index ebd15cadf15f..b6d8c4d0e6c2 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -55,21 +55,6 @@ static int artop6210_pre_reset(struct ata_link *link, unsigned long deadline)
 	return ata_std_prereset(link, deadline);
 }
 
-/**
- *	artop6210_error_handler - Probe specified port on PATA host controller
- *	@ap: Port to probe
- *
- *	LOCKING:
- *	None (inherited from caller).
- */
-
-static void artop6210_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, artop6210_pre_reset,
-				    ata_std_softreset, NULL,
-				    ata_std_postreset);
-}
-
 /**
  *	artop6260_pre_reset	-	check for 40/80 pin
  *	@link: link
@@ -113,21 +98,6 @@ static int artop6260_cable_detect(struct ata_port *ap)
 	return ATA_CBL_PATA80;
 }
 
-/**
- *	artop6260_error_handler - Probe specified port on PATA host controller
- *	@ap: Port to probe
- *
- *	LOCKING:
- *	None (inherited from caller).
- */
-
-static void artop6260_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, artop6260_pre_reset,
-				    ata_std_softreset, NULL,
-				    ata_std_postreset);
-}
-
 /**
  *	artop6210_load_piomode - Load a set of PATA PIO timings
  *	@ap: Port whose timings we are configuring
@@ -322,7 +292,7 @@ static struct ata_port_operations artop6210_ops = {
 	.cable_detect		= ata_cable_40wire,
 	.set_piomode		= artop6210_set_piomode,
 	.set_dmamode		= artop6210_set_dmamode,
-	.error_handler		= artop6210_error_handler,
+	.prereset		= artop6210_pre_reset,
 };
 
 static struct ata_port_operations artop6260_ops = {
@@ -330,7 +300,7 @@ static struct ata_port_operations artop6260_ops = {
 	.cable_detect		= artop6260_cable_detect,
 	.set_piomode		= artop6260_set_piomode,
 	.set_dmamode		= artop6260_set_dmamode,
-	.error_handler		= artop6260_error_handler,
+	.prereset		= artop6260_pre_reset,
 };
 
 
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index 0bea7e75d2d6..56a65baddd4a 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -48,11 +48,6 @@ static int atiixp_pre_reset(struct ata_link *link, unsigned long deadline)
 	return ata_std_prereset(link, deadline);
 }
 
-static void atiixp_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, atiixp_pre_reset, ata_std_softreset, NULL,   ata_std_postreset);
-}
-
 static int atiixp_cable_detect(struct ata_port *ap)
 {
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
@@ -235,7 +230,7 @@ static struct ata_port_operations atiixp_port_ops = {
 	.cable_detect	= atiixp_cable_detect,
 	.set_piomode	= atiixp_set_piomode,
 	.set_dmamode	= atiixp_set_dmamode,
-	.error_handler	= atiixp_error_handler,
+	.prereset	= atiixp_pre_reset,
 };
 
 static int atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id)
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index 7a22ef483061..eea275acb2a8 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -1314,17 +1314,6 @@ static void bfin_std_postreset(struct ata_link *link, unsigned int *classes)
 	write_atapi_register(base, ATA_REG_CTRL, ap->ctl);
 }
 
-/**
- *	bfin_error_handler - Stock error handler for DMA controller
- *	@ap: port to handle error for
- */
-
-static void bfin_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, ata_std_prereset, bfin_std_softreset, NULL,
-			   bfin_std_postreset);
-}
-
 static void bfin_port_stop(struct ata_port *ap)
 {
 	dev_dbg(ap->dev, "in atapi port stop\n");
@@ -1385,7 +1374,8 @@ static const struct ata_port_operations bfin_pata_ops = {
 
 	.freeze			= bfin_bmdma_freeze,
 	.thaw			= bfin_bmdma_thaw,
-	.error_handler		= bfin_error_handler,
+	.softreset		= bfin_std_softreset,
+	.postreset		= bfin_std_postreset,
 	.post_internal_cmd	= bfin_bmdma_stop,
 
 	.irq_clear		= bfin_irq_clear,
diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index 2f5b4848456a..1d839a57068e 100644
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -48,19 +48,6 @@ static int efar_pre_reset(struct ata_link *link, unsigned long deadline)
 	return ata_std_prereset(link, deadline);
 }
 
-/**
- *	efar_probe_reset - Probe specified port on PATA host controller
- *	@ap: Port to probe
- *
- *	LOCKING:
- *	None (inherited from caller).
- */
-
-static void efar_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, efar_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
 /**
  *	efar_cable_detect	-	check for 40/80 pin
  *	@ap: Port
@@ -241,7 +228,7 @@ static struct ata_port_operations efar_ops = {
 	.cable_detect		= efar_cable_detect,
 	.set_piomode		= efar_set_piomode,
 	.set_dmamode		= efar_set_dmamode,
-	.error_handler		= efar_error_handler,
+	.prereset		= efar_pre_reset,
 };
 
 
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index fb37e3a161fc..c10fcd31418d 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -341,19 +341,7 @@ static int hpt37x_pre_reset(struct ata_link *link, unsigned long deadline)
 	return ata_std_prereset(link, deadline);
 }
 
-/**
- *	hpt37x_error_handler	-	reset the hpt374
- *	@ap: ATA port to reset
- *
- *	Perform probe for HPT37x, except for HPT374 channel 2
- */
-
-static void hpt37x_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, hpt37x_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
-static int hpt374_pre_reset(struct ata_link *link, unsigned long deadline)
+static int hpt374_fn1_pre_reset(struct ata_link *link, unsigned long deadline)
 {
 	static const struct pci_bits hpt37x_enable_bits[] = {
 		{ 0x50, 1, 0x04, 0x04 },
@@ -389,25 +377,6 @@ static int hpt374_pre_reset(struct ata_link *link, unsigned long deadline)
 	return ata_std_prereset(link, deadline);
 }
 
-/**
- *	hpt374_error_handler	-	reset the hpt374
- *	@classes:
- *
- *	The 374 cable detect is a little different due to the extra
- *	channels. The function 0 channels work like usual but function 1
- *	is special
- */
-
-static void hpt374_error_handler(struct ata_port *ap)
-{
-	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-
-	if (!(PCI_FUNC(pdev->devfn) & 1))
-		hpt37x_error_handler(ap);
-	else
-		ata_bmdma_drive_eh(ap, hpt374_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
 /**
  *	hpt370_set_piomode		-	PIO setup
  *	@ap: ATA interface
@@ -635,7 +604,7 @@ static struct ata_port_operations hpt370_port_ops = {
 	.mode_filter	= hpt370_filter,
 	.set_piomode	= hpt370_set_piomode,
 	.set_dmamode	= hpt370_set_dmamode,
-	.error_handler	= hpt37x_error_handler,
+	.prereset	= hpt37x_pre_reset,
 };
 
 /*
@@ -659,17 +628,17 @@ static struct ata_port_operations hpt372_port_ops = {
 
 	.set_piomode	= hpt372_set_piomode,
 	.set_dmamode	= hpt372_set_dmamode,
-	.error_handler	= hpt37x_error_handler,
+	.prereset	= hpt37x_pre_reset,
 };
 
 /*
  *	Configuration for HPT374. Mode setting works like 372 and friends
- *	but we have a different cable detection procedure.
+ *	but we have a different cable detection procedure for function 1.
  */
 
-static struct ata_port_operations hpt374_port_ops = {
+static struct ata_port_operations hpt374_fn1_port_ops = {
 	.inherits	= &hpt372_port_ops,
-	.error_handler	= hpt374_error_handler,
+	.prereset	= hpt374_fn1_pre_reset,
 };
 
 /**
@@ -821,13 +790,20 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 		.udma_mask = ATA_UDMA6,
 		.port_ops = &hpt372_port_ops
 	};
-	/* HPT374 - UDMA100 */
-	static const struct ata_port_info info_hpt374 = {
+	/* HPT374 - UDMA100, function 1 uses different prereset method */
+	static const struct ata_port_info info_hpt374_fn0 = {
+		.flags = ATA_FLAG_SLAVE_POSS,
+		.pio_mask = 0x1f,
+		.mwdma_mask = 0x07,
+		.udma_mask = ATA_UDMA5,
+		.port_ops = &hpt372_port_ops
+	};
+	static const struct ata_port_info info_hpt374_fn1 = {
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
 		.udma_mask = ATA_UDMA5,
-		.port_ops = &hpt374_port_ops
+		.port_ops = &hpt374_fn1_port_ops
 	};
 
 	static const int MHz[4] = { 33, 40, 50, 66 };
@@ -912,7 +888,10 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 				break;
 			case PCI_DEVICE_ID_TTI_HPT374:
 				chip_table = &hpt374;
-				ppi[0] = &info_hpt374;
+				if (!(PCI_FUNC(dev->devfn) & 1))
+					*ppi = &info_hpt374_fn0;
+				else
+					*ppi = &info_hpt374_fn1;
 				break;
 			default:
 				printk(KERN_ERR "pata_hpt37x: PCI table is bogus please report (%d).\n", dev->device);
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index c774be93ae04..cd44ee3d3cc1 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -148,7 +148,7 @@ static int hpt3x2n_cable_detect(struct ata_port *ap)
  *	Reset the hardware and state machine,
  */
 
-static int hpt3xn_pre_reset(struct ata_link *link, unsigned long deadline)
+static int hpt3x2n_pre_reset(struct ata_link *link, unsigned long deadline)
 {
 	struct ata_port *ap = link->ap;
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
@@ -159,18 +159,6 @@ static int hpt3xn_pre_reset(struct ata_link *link, unsigned long deadline)
 	return ata_std_prereset(link, deadline);
 }
 
-/**
- *	hpt3x2n_error_handler	-	probe the hpt3x2n bus
- *	@ap: ATA port to reset
- *
- *	Perform the probe reset handling for the 3x2N
- */
-
-static void hpt3x2n_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, hpt3xn_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
 /**
  *	hpt3x2n_set_piomode		-	PIO setup
  *	@ap: ATA interface
@@ -355,7 +343,7 @@ static struct ata_port_operations hpt3x2n_port_ops = {
 	.cable_detect	= hpt3x2n_cable_detect,
 	.set_piomode	= hpt3x2n_set_piomode,
 	.set_dmamode	= hpt3x2n_set_dmamode,
-	.error_handler	= hpt3x2n_error_handler,
+	.prereset	= hpt3x2n_pre_reset,
 };
 
 /**
diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c
index ff16b0eaa2c2..13d43e9dd279 100644
--- a/drivers/ata/pata_icside.c
+++ b/drivers/ata/pata_icside.c
@@ -332,12 +332,6 @@ static void pata_icside_postreset(struct ata_link *link, unsigned int *classes)
 	}
 }
 
-static void pata_icside_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, NULL,
-			   pata_icside_postreset);
-}
-
 static struct ata_port_operations pata_icside_port_ops = {
 	.inherits		= &ata_sff_port_ops,
 	/* no need to build any PRD tables for DMA */
@@ -350,7 +344,7 @@ static struct ata_port_operations pata_icside_port_ops = {
 
 	.cable_detect		= ata_cable_40wire,
 	.set_dmamode		= pata_icside_set_dmamode,
-	.error_handler		= pata_icside_error_handler,
+	.postreset		= pata_icside_postreset,
 	.post_internal_cmd	= pata_icside_bmdma_stop,
 };
 
diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c
index d23a46b75028..84ab89e8a247 100644
--- a/drivers/ata/pata_it8213.c
+++ b/drivers/ata/pata_it8213.c
@@ -43,19 +43,6 @@ static int it8213_pre_reset(struct ata_link *link, unsigned long deadline)
 	return ata_std_prereset(link, deadline);
 }
 
-/**
- *	it8213_error_handler - Probe specified port on PATA host controller
- *	@ap: Port to probe
- *
- *	LOCKING:
- *	None (inherited from caller).
- */
-
-static void it8213_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, it8213_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
 /**
  *	it8213_cable_detect	-	check for 40/80 pin
  *	@ap: Port
@@ -252,7 +239,7 @@ static struct ata_port_operations it8213_ops = {
 	.cable_detect		= it8213_cable_detect,
 	.set_piomode		= it8213_set_piomode,
 	.set_dmamode		= it8213_set_dmamode,
-	.error_handler		= it8213_error_handler,
+	.prereset		= it8213_pre_reset,
 };
 
 
diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c
index ac7c0822b1a7..fec93196710e 100644
--- a/drivers/ata/pata_mpc52xx.c
+++ b/drivers/ata/pata_mpc52xx.c
@@ -255,15 +255,6 @@ mpc52xx_ata_dev_select(struct ata_port *ap, unsigned int device)
 	ata_std_dev_select(ap,device);
 }
 
-static void
-mpc52xx_ata_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, NULL,
-			ata_std_postreset);
-}
-
-
-
 static struct scsi_host_template mpc52xx_ata_sht = {
 	ATA_PIO_SHT(DRV_NAME),
 };
@@ -273,7 +264,6 @@ static struct ata_port_operations mpc52xx_ata_port_ops = {
 	.dev_select		= mpc52xx_ata_dev_select,
 	.cable_detect		= ata_cable_40wire,
 	.set_piomode		= mpc52xx_ata_set_piomode,
-	.error_handler		= mpc52xx_ata_error_handler,
 	.post_internal_cmd	= ATA_OP_NULL,
 };
 
diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c
index dab54f8a272d..1b9d0d412ebf 100644
--- a/drivers/ata/pata_mpiix.c
+++ b/drivers/ata/pata_mpiix.c
@@ -58,20 +58,6 @@ static int mpiix_pre_reset(struct ata_link *link, unsigned long deadline)
 	return ata_std_prereset(link, deadline);
 }
 
-/**
- *	mpiix_error_handler		-	probe reset
- *	@ap: ATA port
- *
- *	Perform the ATA probe and bus reset sequence plus specific handling
- *	for this hardware. The MPIIX has the enable bits in a different place
- *	to PIIX4 and friends. As a pure PIO device it has no cable detect
- */
-
-static void mpiix_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, mpiix_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
 /**
  *	mpiix_set_piomode	-	set initial PIO mode data
  *	@ap: ATA interface
@@ -159,7 +145,7 @@ static struct ata_port_operations mpiix_port_ops = {
 	.qc_issue	= mpiix_qc_issue_prot,
 	.cable_detect	= ata_cable_40wire,
 	.set_piomode	= mpiix_set_piomode,
-	.error_handler	= mpiix_error_handler,
+	.prereset	= mpiix_pre_reset,
 };
 
 static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c
index 5a043e426480..4d2eefee7387 100644
--- a/drivers/ata/pata_ns87410.c
+++ b/drivers/ata/pata_ns87410.c
@@ -53,20 +53,6 @@ static int ns87410_pre_reset(struct ata_link *link, unsigned long deadline)
 	return ata_std_prereset(link, deadline);
 }
 
-/**
- *	ns87410_error_handler		-	probe reset
- *	@ap: ATA port
- *
- *	Perform the ATA probe and bus reset sequence plus specific handling
- *	for this hardware. The MPIIX has the enable bits in a different place
- *	to PIIX4 and friends. As a pure PIO device it has no cable detect
- */
-
-static void ns87410_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, ns87410_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
 /**
  *	ns87410_set_piomode	-	set initial PIO mode data
  *	@ap: ATA interface
@@ -152,7 +138,7 @@ static struct ata_port_operations ns87410_port_ops = {
 	.qc_issue	= ns87410_qc_issue_prot,
 	.cable_detect	= ata_cable_40wire,
 	.set_piomode	= ns87410_set_piomode,
-	.error_handler	= ns87410_error_handler,
+	.prereset	= ns87410_pre_reset,
 };
 
 static int ns87410_init_one(struct pci_dev *dev, const struct pci_device_id *id)
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index 7001b756819e..c1da79a76439 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -50,20 +50,6 @@ static int oldpiix_pre_reset(struct ata_link *link, unsigned long deadline)
 	return ata_std_prereset(link, deadline);
 }
 
-/**
- *	oldpiix_pata_error_handler - Probe specified port on PATA host controller
- *	@ap: Port to probe
- *	@classes:
- *
- *	LOCKING:
- *	None (inherited from caller).
- */
-
-static void oldpiix_pata_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, oldpiix_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
 /**
  *	oldpiix_set_piomode - Initialize host controller PATA PIO timings
  *	@ap: Port whose timings we are configuring
@@ -229,7 +215,7 @@ static struct ata_port_operations oldpiix_pata_ops = {
 	.cable_detect		= ata_cable_40wire,
 	.set_piomode		= oldpiix_set_piomode,
 	.set_dmamode		= oldpiix_set_dmamode,
-	.error_handler		= oldpiix_pata_error_handler,
+	.prereset		= oldpiix_pre_reset,
 };
 
 
diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c
index 5a5f20e03fc0..4ddd03a67775 100644
--- a/drivers/ata/pata_opti.c
+++ b/drivers/ata/pata_opti.c
@@ -67,21 +67,6 @@ static int opti_pre_reset(struct ata_link *link, unsigned long deadline)
 	return ata_std_prereset(link, deadline);
 }
 
-/**
- *	opti_probe_reset		-	probe reset
- *	@ap: ATA port
- *
- *	Perform the ATA probe and bus reset sequence plus specific handling
- *	for this hardware. The Opti needs little handling - we have no UDMA66
- *	capability that needs cable detection. All we must do is check the port
- *	is enabled.
- */
-
-static void opti_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, opti_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
 /**
  *	opti_write_reg		-	control register setup
  *	@ap: ATA port
@@ -172,7 +157,7 @@ static struct ata_port_operations opti_port_ops = {
 	.inherits	= &ata_sff_port_ops,
 	.cable_detect	= ata_cable_40wire,
 	.set_piomode	= opti_set_piomode,
-	.error_handler	= opti_error_handler,
+	.prereset	= opti_pre_reset,
 };
 
 static int opti_init_one(struct pci_dev *dev, const struct pci_device_id *id)
diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index ba2819ff964b..36ac147de178 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -67,21 +67,6 @@ static int optidma_pre_reset(struct ata_link *link, unsigned long deadline)
 	return ata_std_prereset(link, deadline);
 }
 
-/**
- *	optidma_probe_reset		-	probe reset
- *	@ap: ATA port
- *
- *	Perform the ATA probe and bus reset sequence plus specific handling
- *	for this hardware. The Opti needs little handling - we have no UDMA66
- *	capability that needs cable detection. All we must do is check the port
- *	is enabled.
- */
-
-static void optidma_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, optidma_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
 /**
  *	optidma_unlock		-	unlock control registers
  *	@ap: ATA port
@@ -359,7 +344,7 @@ static struct ata_port_operations optidma_port_ops = {
 	.set_piomode	= optidma_set_pio_mode,
 	.set_dmamode	= optidma_set_dma_mode,
 	.set_mode	= optidma_set_mode,
-	.error_handler	= optidma_error_handler,
+	.prereset	= optidma_pre_reset,
 };
 
 static struct ata_port_operations optiplus_port_ops = {
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index f619c20dd192..d235c9f92d09 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -63,7 +63,7 @@ enum {
 };
 
 static int pdc2027x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
-static void pdc2027x_error_handler(struct ata_port *ap);
+static int pdc2027x_prereset(struct ata_link *link, unsigned long deadline);
 static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev);
 static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev);
 static int pdc2027x_check_atapi_dma(struct ata_queued_cmd *qc);
@@ -136,7 +136,7 @@ static struct ata_port_operations pdc2027x_pata100_ops = {
 	.inherits		= &ata_bmdma_port_ops,
 	.check_atapi_dma	= pdc2027x_check_atapi_dma,
 	.cable_detect		= pdc2027x_cable_detect,
-	.error_handler		= pdc2027x_error_handler,
+	.prereset		= pdc2027x_prereset,
 };
 
 static struct ata_port_operations pdc2027x_pata133_ops = {
@@ -251,21 +251,6 @@ static int pdc2027x_prereset(struct ata_link *link, unsigned long deadline)
 	return ata_std_prereset(link, deadline);
 }
 
-/**
- *	pdc2027x_error_handler - Perform reset on PATA port and classify
- *	@ap: Port to reset
- *
- *	Reset PATA phy and classify attached devices.
- *
- *	LOCKING:
- *	None (inherited from caller).
- */
-
-static void pdc2027x_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, pdc2027x_prereset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
 /**
  *	pdc2720x_mode_filter	-	mode selection filter
  *	@adev: ATA device
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index 033d1f3a82de..07f2d7a6f1a8 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -904,17 +904,6 @@ static void scc_std_postreset(struct ata_link *link, unsigned int *classes)
 	DPRINTK("EXIT\n");
 }
 
-/**
- *	scc_error_handler - Stock error handler for BMDMA controller
- *	@ap: port to handle error for
- */
-
-static void scc_error_handler (struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, scc_pata_prereset, scc_std_softreset, NULL,
-			   scc_std_postreset);
-}
-
 /**
  *	scc_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt.
  *	@ap: Port associated with this ATA transaction.
@@ -992,7 +981,9 @@ static const struct ata_port_operations scc_pata_ops = {
 	.data_xfer		= scc_data_xfer,
 
 	.freeze			= scc_bmdma_freeze,
-	.error_handler		= scc_error_handler,
+	.prereset		= scc_pata_prereset,
+	.softreset		= scc_std_softreset,
+	.postreset		= scc_std_postreset,
 	.post_internal_cmd	= scc_bmdma_stop,
 
 	.irq_clear		= scc_bmdma_irq_clear,
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index 28abfc26e7a4..793e6714df8c 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -160,19 +160,6 @@ static int sis_pre_reset(struct ata_link *link, unsigned long deadline)
 }
 
 
-/**
- *	sis_error_handler - Probe specified port on PATA host controller
- *	@ap: Port to probe
- *
- *	LOCKING:
- *	None (inherited from caller).
- */
-
-static void sis_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, sis_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
 /**
  *	sis_set_fifo	-	Set RWP fifo bits for this device
  *	@ap: Port
@@ -526,7 +513,7 @@ static struct ata_port_operations sis_133_for_sata_ops = {
 
 static struct ata_port_operations sis_base_ops = {
 	.inherits		= &ata_bmdma_port_ops,
-	.error_handler		= sis_error_handler,
+	.prereset		= sis_pre_reset,
 };
 
 static struct ata_port_operations sis_133_ops = {
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index 1d97f920bd2b..bee11ca8f55a 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -64,12 +64,6 @@ static int sl82c105_pre_reset(struct ata_link *link, unsigned long deadline)
 }
 
 
-static void sl82c105_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, sl82c105_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
-
 /**
  *	sl82c105_configure_piomode	-	set chip PIO timing
  *	@ap: ATA interface
@@ -245,7 +239,7 @@ static struct ata_port_operations sl82c105_port_ops = {
 	.bmdma_stop	= sl82c105_bmdma_stop,
 	.cable_detect	= ata_cable_40wire,
 	.set_piomode	= sl82c105_set_piomode,
-	.error_handler	= sl82c105_error_handler,
+	.prereset	= sl82c105_pre_reset,
 };
 
 /**
diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c
index f07b0e5df222..bd546a389ce1 100644
--- a/drivers/ata/pata_triflex.c
+++ b/drivers/ata/pata_triflex.c
@@ -71,11 +71,6 @@ static int triflex_prereset(struct ata_link *link, unsigned long deadline)
 
 
 
-static void triflex_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, triflex_prereset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
 /**
  *	triflex_load_timing		-	timing configuration
  *	@ap: ATA interface
@@ -189,7 +184,7 @@ static struct ata_port_operations triflex_port_ops = {
 	.bmdma_stop	= triflex_bmdma_stop,
 	.cable_detect	= ata_cable_40wire,
 	.set_piomode	= triflex_set_piomode,
-	.error_handler	= triflex_error_handler,
+	.prereset	= triflex_prereset,
 };
 
 static int triflex_init_one(struct pci_dev *dev, const struct pci_device_id *id)
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index f4092cbd566f..2928fa173132 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -214,18 +214,6 @@ static int via_pre_reset(struct ata_link *link, unsigned long deadline)
 }
 
 
-/**
- *	via_error_handler		-	reset for VIA chips
- *	@ap: ATA port
- *
- *	Handle the reset callback for the later chips with cable detect
- */
-
-static void via_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, via_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
 /**
  *	via_do_set_mode	-	set initial PIO mode data
  *	@ap: ATA interface
@@ -343,7 +331,7 @@ static struct ata_port_operations via_port_ops = {
 	.cable_detect	= via_cable_detect,
 	.set_piomode	= via_set_piomode,
 	.set_dmamode	= via_set_dmamode,
-	.error_handler	= via_error_handler,
+	.prereset	= via_pre_reset,
 };
 
 static struct ata_port_operations via_port_ops_noirq = {
diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c
index a5706149af6b..5ed065d0ab4c 100644
--- a/drivers/ata/pdc_adma.c
+++ b/drivers/ata/pdc_adma.c
@@ -140,7 +140,7 @@ static void adma_bmdma_stop(struct ata_queued_cmd *qc);
 static u8 adma_bmdma_status(struct ata_port *ap);
 static void adma_freeze(struct ata_port *ap);
 static void adma_thaw(struct ata_port *ap);
-static void adma_error_handler(struct ata_port *ap);
+static int adma_prereset(struct ata_link *link, unsigned long deadline);
 
 static struct scsi_host_template adma_ata_sht = {
 	ATA_BASE_SHT(DRV_NAME),
@@ -166,7 +166,8 @@ static struct ata_port_operations adma_ata_ops = {
 
 	.freeze			= adma_freeze,
 	.thaw			= adma_thaw,
-	.error_handler		= adma_error_handler,
+	.prereset		= adma_prereset,
+	.softreset		= ata_std_softreset,
 
 	.port_start		= adma_port_start,
 	.port_stop		= adma_port_stop,
@@ -292,12 +293,6 @@ static int adma_prereset(struct ata_link *link, unsigned long deadline)
 	return ata_std_prereset(link, deadline);
 }
 
-static void adma_error_handler(struct ata_port *ap)
-{
-	ata_do_eh(ap, adma_prereset, ata_std_softreset, NULL,
-		  ata_std_postreset);
-}
-
 static int adma_fill_sg(struct ata_queued_cmd *qc)
 {
 	struct scatterlist *sg;
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 865030ae8f8a..676302fdaa97 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -912,16 +912,6 @@ err:
 	return -EIO;
 }
 
-static void sata_fsl_error_handler(struct ata_port *ap)
-{
-
-	DPRINTK("in xx_error_handler\n");
-
-	/* perform recovery */
-	ata_do_eh(ap, ata_std_prereset, sata_fsl_softreset, sata_std_hardreset,
-		  ata_std_postreset);
-}
-
 static void sata_fsl_post_internal_cmd(struct ata_queued_cmd *qc)
 {
 	if (qc->flags & ATA_QCFLAG_FAILED)
@@ -1213,7 +1203,7 @@ static const struct ata_port_operations sata_fsl_ops = {
 
 	.freeze = sata_fsl_freeze,
 	.thaw = sata_fsl_thaw,
-	.error_handler = sata_fsl_error_handler,
+	.softreset = sata_fsl_softreset,
 	.post_internal_cmd = sata_fsl_post_internal_cmd,
 
 	.port_start = sata_fsl_port_start,
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index 047f80f5825c..ba1c09953517 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -452,8 +452,7 @@ static void inic_error_handler(struct ata_port *ap)
 	spin_unlock_irqrestore(ap->lock, flags);
 
 	/* PIO and DMA engines have been stopped, perform recovery */
-	ata_do_eh(ap, ata_std_prereset, NULL, inic_hardreset,
-		  ata_std_postreset);
+	ata_std_error_handler(ap);
 }
 
 static void inic_post_internal_cmd(struct ata_queued_cmd *qc)
@@ -532,6 +531,8 @@ static struct ata_port_operations inic_port_ops = {
 
 	.freeze			= inic_freeze,
 	.thaw			= inic_thaw,
+	.softreset		= ATA_OP_NULL,	/* softreset is broken */
+	.hardreset		= inic_hardreset,
 	.error_handler		= inic_error_handler,
 	.post_internal_cmd	= inic_post_internal_cmd,
 	.dev_config		= inic_dev_config,
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index f341a82d27bf..9a89390531b1 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -470,7 +470,10 @@ static void mv_port_stop(struct ata_port *ap);
 static void mv_qc_prep(struct ata_queued_cmd *qc);
 static void mv_qc_prep_iie(struct ata_queued_cmd *qc);
 static unsigned int mv_qc_issue(struct ata_queued_cmd *qc);
-static void mv_error_handler(struct ata_port *ap);
+static int mv_prereset(struct ata_link *link, unsigned long deadline);
+static int mv_hardreset(struct ata_link *link, unsigned int *class,
+			unsigned long deadline);
+static void mv_postreset(struct ata_link *link, unsigned int *classes);
 static void mv_eh_freeze(struct ata_port *ap);
 static void mv_eh_thaw(struct ata_port *ap);
 static void mv6_dev_config(struct ata_device *dev);
@@ -534,7 +537,10 @@ static struct ata_port_operations mv5_ops = {
 
 	.freeze			= mv_eh_freeze,
 	.thaw			= mv_eh_thaw,
-	.error_handler		= mv_error_handler,
+	.prereset		= mv_prereset,
+	.hardreset		= mv_hardreset,
+	.postreset		= mv_postreset,
+	.error_handler		= ata_std_error_handler, /* avoid SFF EH */
 	.post_internal_cmd	= ATA_OP_NULL,
 
 	.scr_read		= mv5_scr_read,
@@ -2415,12 +2421,6 @@ static void mv_postreset(struct ata_link *link, unsigned int *classes)
 	iowrite8(ap->ctl, ap->ioaddr.ctl_addr);
 }
 
-static void mv_error_handler(struct ata_port *ap)
-{
-	ata_do_eh(ap, mv_prereset, ata_std_softreset,
-		  mv_hardreset, mv_postreset);
-}
-
 static void mv_eh_freeze(struct ata_port *ap)
 {
 	struct mv_host_priv *hpriv = ap->host->private_data;
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 5637b082bc85..b2eb5724cf85 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -309,7 +309,8 @@ static void nv_nf2_freeze(struct ata_port *ap);
 static void nv_nf2_thaw(struct ata_port *ap);
 static void nv_ck804_freeze(struct ata_port *ap);
 static void nv_ck804_thaw(struct ata_port *ap);
-static void nv_error_handler(struct ata_port *ap);
+static int nv_hardreset(struct ata_link *link, unsigned int *class,
+			unsigned long deadline);
 static int nv_adma_slave_config(struct scsi_device *sdev);
 static int nv_adma_check_atapi_dma(struct ata_queued_cmd *qc);
 static void nv_adma_qc_prep(struct ata_queued_cmd *qc);
@@ -406,7 +407,7 @@ static struct scsi_host_template nv_swncq_sht = {
 
 static struct ata_port_operations nv_generic_ops = {
 	.inherits		= &ata_bmdma_port_ops,
-	.error_handler		= nv_error_handler,
+	.hardreset		= nv_hardreset,
 	.scr_read		= nv_scr_read,
 	.scr_write		= nv_scr_write,
 };
@@ -1599,12 +1600,6 @@ static int nv_hardreset(struct ata_link *link, unsigned int *class,
 	return sata_std_hardreset(link, &dummy, deadline);
 }
 
-static void nv_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset,
-			   nv_hardreset, ata_std_postreset);
-}
-
 static void nv_adma_error_handler(struct ata_port *ap)
 {
 	struct nv_adma_port_priv *pp = ap->private_data;
@@ -1658,8 +1653,7 @@ static void nv_adma_error_handler(struct ata_port *ap)
 		readw(mmio + NV_ADMA_CTL);	/* flush posted write */
 	}
 
-	ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset,
-			   nv_hardreset, ata_std_postreset);
+	ata_bmdma_error_handler(ap);
 }
 
 static void nv_swncq_qc_to_dq(struct ata_port *ap, struct ata_queued_cmd *qc)
@@ -1785,8 +1779,7 @@ static void nv_swncq_error_handler(struct ata_port *ap)
 		ehc->i.action |= ATA_EH_RESET;
 	}
 
-	ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset,
-			   nv_hardreset, ata_std_postreset);
+	ata_bmdma_error_handler(ap);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index e09b975c973d..91659dc15caf 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -148,8 +148,7 @@ static void pdc_freeze(struct ata_port *ap);
 static void pdc_sata_freeze(struct ata_port *ap);
 static void pdc_thaw(struct ata_port *ap);
 static void pdc_sata_thaw(struct ata_port *ap);
-static void pdc_pata_error_handler(struct ata_port *ap);
-static void pdc_sata_error_handler(struct ata_port *ap);
+static void pdc_error_handler(struct ata_port *ap);
 static void pdc_post_internal_cmd(struct ata_queued_cmd *qc);
 static int pdc_pata_cable_detect(struct ata_port *ap);
 static int pdc_sata_cable_detect(struct ata_port *ap);
@@ -171,6 +170,7 @@ static const struct ata_port_operations pdc_common_ops = {
 	.irq_clear		= pdc_irq_clear,
 
 	.post_internal_cmd	= pdc_post_internal_cmd,
+	.error_handler		= pdc_error_handler,
 };
 
 static struct ata_port_operations pdc_sata_ops = {
@@ -178,7 +178,6 @@ static struct ata_port_operations pdc_sata_ops = {
 	.cable_detect		= pdc_sata_cable_detect,
 	.freeze			= pdc_sata_freeze,
 	.thaw			= pdc_sata_thaw,
-	.error_handler		= pdc_sata_error_handler,
 	.scr_read		= pdc_sata_scr_read,
 	.scr_write		= pdc_sata_scr_write,
 	.port_start		= pdc_sata_port_start,
@@ -195,7 +194,6 @@ static struct ata_port_operations pdc_pata_ops = {
 	.cable_detect		= pdc_pata_cable_detect,
 	.freeze			= pdc_freeze,
 	.thaw			= pdc_thaw,
-	.error_handler		= pdc_pata_error_handler,
 	.port_start		= pdc_common_port_start,
 };
 
@@ -694,24 +692,12 @@ static void pdc_sata_thaw(struct ata_port *ap)
 	readl(host_mmio + hotplug_offset); /* flush */
 }
 
-static void pdc_common_error_handler(struct ata_port *ap, ata_reset_fn_t hardreset)
+static void pdc_error_handler(struct ata_port *ap)
 {
 	if (!(ap->pflags & ATA_PFLAG_FROZEN))
 		pdc_reset_port(ap);
 
-	/* perform recovery */
-	ata_do_eh(ap, ata_std_prereset, ata_std_softreset, hardreset,
-		  ata_std_postreset);
-}
-
-static void pdc_pata_error_handler(struct ata_port *ap)
-{
-	pdc_common_error_handler(ap, NULL);
-}
-
-static void pdc_sata_error_handler(struct ata_port *ap)
-{
-	pdc_common_error_handler(ap, sata_std_hardreset);
+	ata_std_error_handler(ap);
 }
 
 static void pdc_post_internal_cmd(struct ata_queued_cmd *qc)
diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c
index 107ef09814de..2ceb0990bcd8 100644
--- a/drivers/ata/sata_qstor.c
+++ b/drivers/ata/sata_qstor.c
@@ -123,6 +123,7 @@ static void qs_bmdma_stop(struct ata_queued_cmd *qc);
 static u8 qs_bmdma_status(struct ata_port *ap);
 static void qs_freeze(struct ata_port *ap);
 static void qs_thaw(struct ata_port *ap);
+static int qs_prereset(struct ata_link *link, unsigned long deadline);
 static void qs_error_handler(struct ata_port *ap);
 
 static struct scsi_host_template qs_ata_sht = {
@@ -142,6 +143,8 @@ static struct ata_port_operations qs_ata_ops = {
 
 	.freeze			= qs_freeze,
 	.thaw			= qs_thaw,
+	.prereset		= qs_prereset,
+	.softreset		= ATA_OP_NULL,
 	.error_handler		= qs_error_handler,
 	.post_internal_cmd	= ATA_OP_NULL,
 
@@ -250,8 +253,7 @@ static int qs_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val)
 static void qs_error_handler(struct ata_port *ap)
 {
 	qs_enter_reg_mode(ap);
-	ata_do_eh(ap, qs_prereset, NULL, sata_std_hardreset,
-		  ata_std_postreset);
+	ata_std_error_handler(ap);
 }
 
 static int qs_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val)
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 363fb90e1047..67df1d753305 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -352,6 +352,14 @@ static void sil24_pmp_attach(struct ata_port *ap);
 static void sil24_pmp_detach(struct ata_port *ap);
 static void sil24_freeze(struct ata_port *ap);
 static void sil24_thaw(struct ata_port *ap);
+static int sil24_softreset(struct ata_link *link, unsigned int *class,
+			   unsigned long deadline);
+static int sil24_hardreset(struct ata_link *link, unsigned int *class,
+			   unsigned long deadline);
+static int sil24_pmp_softreset(struct ata_link *link, unsigned int *class,
+			       unsigned long deadline);
+static int sil24_pmp_hardreset(struct ata_link *link, unsigned int *class,
+			       unsigned long deadline);
 static void sil24_error_handler(struct ata_port *ap);
 static void sil24_post_internal_cmd(struct ata_queued_cmd *qc);
 static int sil24_port_start(struct ata_port *ap);
@@ -402,6 +410,10 @@ static struct ata_port_operations sil24_ops = {
 
 	.freeze			= sil24_freeze,
 	.thaw			= sil24_thaw,
+	.softreset		= sil24_softreset,
+	.hardreset		= sil24_hardreset,
+	.pmp_softreset		= sil24_pmp_softreset,
+	.pmp_hardreset		= sil24_pmp_hardreset,
 	.error_handler		= sil24_error_handler,
 	.post_internal_cmd	= sil24_post_internal_cmd,
 	.dev_config		= sil24_dev_config,
@@ -1181,11 +1193,7 @@ static void sil24_error_handler(struct ata_port *ap)
 	if (sil24_init_port(ap))
 		ata_eh_freeze_port(ap);
 
-	/* perform recovery */
-	sata_pmp_do_eh(ap, ata_std_prereset, sil24_softreset, sil24_hardreset,
-		       ata_std_postreset, sata_pmp_std_prereset,
-		       sil24_pmp_softreset, sil24_pmp_hardreset,
-		       sata_pmp_std_postreset);
+	sata_pmp_error_handler(ap);
 
 	pp->do_port_rst = 0;
 }
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 6326bcf8ea5d..402fd7333d48 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -71,7 +71,7 @@ static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
 static int svia_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val);
 static int svia_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val);
 static void svia_noop_freeze(struct ata_port *ap);
-static void vt6420_error_handler(struct ata_port *ap);
+static int vt6420_prereset(struct ata_link *link, unsigned long deadline);
 static int vt6421_pata_cable_detect(struct ata_port *ap);
 static void vt6421_set_pio_mode(struct ata_port *ap, struct ata_device *adev);
 static void vt6421_set_dma_mode(struct ata_port *ap, struct ata_device *adev);
@@ -106,7 +106,7 @@ static struct scsi_host_template svia_sht = {
 static struct ata_port_operations vt6420_sata_ops = {
 	.inherits		= &ata_bmdma_port_ops,
 	.freeze			= svia_noop_freeze,
-	.error_handler		= vt6420_error_handler,
+	.prereset		= vt6420_prereset,
 };
 
 static struct ata_port_operations vt6421_pata_ops = {
@@ -247,12 +247,6 @@ static int vt6420_prereset(struct ata_link *link, unsigned long deadline)
 	return 0;
 }
 
-static void vt6420_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, vt6420_prereset, ata_std_softreset, NULL,
-			   ata_std_postreset);
-}
-
 static int vt6421_pata_cable_detect(struct ata_port *ap)
 {
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-- 
cgit v1.2.2


From 21572ea58a1f99a59044febde90c31167d2f59ae Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Tue, 25 Mar 2008 22:16:39 +0900
Subject: libata: drop ata_dev_select() from ata_dev_read_id

There is no reason to issue device select in read_id, it will be done
by ops->qc_issue() when IDENTIFY[_PACKET] is issued via
ata_exec_internal().

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/libata-core.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 345f4a6865a8..7860d9f60ae4 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2156,7 +2156,6 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
 	if (ata_msg_ctl(ap))
 		ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __func__);
 
-	ata_dev_select(ap, dev->devno, 1, 1); /* select device 0/1 */
  retry:
 	ata_tf_init(dev, &tf);
 
-- 
cgit v1.2.2


From 272f7884e8c0effe594e5537092b9c0ccc0140b0 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Tue, 25 Mar 2008 22:16:40 +0900
Subject: libata: reorder functions in libata-sff.c

Reorder functions in drivers/ata/libata-sff.c such that functions
generally follow ops table order and init functions come last.  This
is in preparation of SFF cleanup.

This patch strictly moves stuff around and as such doesn't cause any
functional difference.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/libata-sff.c | 443 +++++++++++++++++++++++------------------------
 1 file changed, 220 insertions(+), 223 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 2a229a1d3211..40645ed125b1 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -38,6 +38,43 @@
 
 #include "libata.h"
 
+/**
+ *	ata_check_status - Read device status reg & clear interrupt
+ *	@ap: port where the device is
+ *
+ *	Reads ATA taskfile status register for currently-selected device
+ *	and return its value. This also clears pending interrupts
+ *      from this device
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+u8 ata_check_status(struct ata_port *ap)
+{
+	return ioread8(ap->ioaddr.status_addr);
+}
+
+/**
+ *	ata_altstatus - Read device alternate status reg
+ *	@ap: port where the device is
+ *
+ *	Reads ATA taskfile alternate status register for
+ *	currently-selected device and return its value.
+ *
+ *	Note: may NOT be used as the check_altstatus() entry in
+ *	ata_port_operations.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+u8 ata_altstatus(struct ata_port *ap)
+{
+	if (ap->ops->check_altstatus)
+		return ap->ops->check_altstatus(ap);
+
+	return ioread8(ap->ioaddr.altstatus_addr);
+}
+
 /**
  *	ata_irq_on - Enable interrupts on a port.
  *	@ap: Port on which interrupts are enabled.
@@ -65,6 +102,27 @@ u8 ata_irq_on(struct ata_port *ap)
 	return tmp;
 }
 
+/**
+ *	ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt.
+ *	@ap: Port associated with this ATA transaction.
+ *
+ *	Clear interrupt and error flags in DMA status register.
+ *
+ *	May be used as the irq_clear() entry in ata_port_operations.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ */
+void ata_bmdma_irq_clear(struct ata_port *ap)
+{
+	void __iomem *mmio = ap->ioaddr.bmdma_addr;
+
+	if (!mmio)
+		return;
+
+	iowrite8(ioread8(mmio + ATA_DMA_STATUS), mmio + ATA_DMA_STATUS);
+}
+
 /**
  *	ata_tf_load - send taskfile registers to host controller
  *	@ap: Port to which output is sent
@@ -75,7 +133,6 @@ u8 ata_irq_on(struct ata_port *ap)
  *	LOCKING:
  *	Inherited from caller.
  */
-
 void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
 {
 	struct ata_ioports *ioaddr = &ap->ioaddr;
@@ -125,25 +182,6 @@ void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
 	ata_wait_idle(ap);
 }
 
-/**
- *	ata_exec_command - issue ATA command to host controller
- *	@ap: port to which command is being issued
- *	@tf: ATA taskfile register set
- *
- *	Issues ATA command, with proper synchronization with interrupt
- *	handler / other threads.
- *
- *	LOCKING:
- *	spin_lock_irqsave(host lock)
- */
-void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf)
-{
-	DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command);
-
-	iowrite8(tf->command, ap->ioaddr.command_addr);
-	ata_pause(ap);
-}
-
 /**
  *	ata_tf_read - input device's ATA taskfile shadow registers
  *	@ap: Port from which input is read
@@ -185,169 +223,22 @@ void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
 }
 
 /**
- *	ata_check_status - Read device status reg & clear interrupt
- *	@ap: port where the device is
- *
- *	Reads ATA taskfile status register for currently-selected device
- *	and return its value. This also clears pending interrupts
- *      from this device
- *
- *	LOCKING:
- *	Inherited from caller.
- */
-u8 ata_check_status(struct ata_port *ap)
-{
-	return ioread8(ap->ioaddr.status_addr);
-}
-
-/**
- *	ata_altstatus - Read device alternate status reg
- *	@ap: port where the device is
- *
- *	Reads ATA taskfile alternate status register for
- *	currently-selected device and return its value.
- *
- *	Note: may NOT be used as the check_altstatus() entry in
- *	ata_port_operations.
- *
- *	LOCKING:
- *	Inherited from caller.
- */
-u8 ata_altstatus(struct ata_port *ap)
-{
-	if (ap->ops->check_altstatus)
-		return ap->ops->check_altstatus(ap);
-
-	return ioread8(ap->ioaddr.altstatus_addr);
-}
-
-/**
- *	ata_bmdma_setup - Set up PCI IDE BMDMA transaction
- *	@qc: Info associated with this ATA transaction.
- *
- *	LOCKING:
- *	spin_lock_irqsave(host lock)
- */
-void ata_bmdma_setup(struct ata_queued_cmd *qc)
-{
-	struct ata_port *ap = qc->ap;
-	unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
-	u8 dmactl;
-
-	/* load PRD table addr. */
-	mb();	/* make sure PRD table writes are visible to controller */
-	iowrite32(ap->prd_dma, ap->ioaddr.bmdma_addr + ATA_DMA_TABLE_OFS);
-
-	/* specify data direction, triple-check start bit is clear */
-	dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
-	dmactl &= ~(ATA_DMA_WR | ATA_DMA_START);
-	if (!rw)
-		dmactl |= ATA_DMA_WR;
-	iowrite8(dmactl, ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
-
-	/* issue r/w command */
-	ap->ops->exec_command(ap, &qc->tf);
-}
-
-/**
- *	ata_bmdma_start - Start a PCI IDE BMDMA transaction
- *	@qc: Info associated with this ATA transaction.
- *
- *	LOCKING:
- *	spin_lock_irqsave(host lock)
- */
-void ata_bmdma_start(struct ata_queued_cmd *qc)
-{
-	struct ata_port *ap = qc->ap;
-	u8 dmactl;
-
-	/* start host DMA transaction */
-	dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
-	iowrite8(dmactl | ATA_DMA_START, ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
-
-	/* Strictly, one may wish to issue an ioread8() here, to
-	 * flush the mmio write.  However, control also passes
-	 * to the hardware at this point, and it will interrupt
-	 * us when we are to resume control.  So, in effect,
-	 * we don't care when the mmio write flushes.
-	 * Further, a read of the DMA status register _immediately_
-	 * following the write may not be what certain flaky hardware
-	 * is expected, so I think it is best to not add a readb()
-	 * without first all the MMIO ATA cards/mobos.
-	 * Or maybe I'm just being paranoid.
-	 *
-	 * FIXME: The posting of this write means I/O starts are
-	 * unneccessarily delayed for MMIO
-	 */
-}
-
-/**
- *	ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt.
- *	@ap: Port associated with this ATA transaction.
- *
- *	Clear interrupt and error flags in DMA status register.
- *
- *	May be used as the irq_clear() entry in ata_port_operations.
- *
- *	LOCKING:
- *	spin_lock_irqsave(host lock)
- */
-void ata_bmdma_irq_clear(struct ata_port *ap)
-{
-	void __iomem *mmio = ap->ioaddr.bmdma_addr;
-
-	if (!mmio)
-		return;
-
-	iowrite8(ioread8(mmio + ATA_DMA_STATUS), mmio + ATA_DMA_STATUS);
-}
-
-/**
- *	ata_noop_irq_clear - Noop placeholder for irq_clear
- *	@ap: Port associated with this ATA transaction.
- */
-void ata_noop_irq_clear(struct ata_port *ap)
-{
-}
-
-/**
- *	ata_bmdma_status - Read PCI IDE BMDMA status
- *	@ap: Port associated with this ATA transaction.
- *
- *	Read and return BMDMA status register.
- *
- *	May be used as the bmdma_status() entry in ata_port_operations.
- *
- *	LOCKING:
- *	spin_lock_irqsave(host lock)
- */
-u8 ata_bmdma_status(struct ata_port *ap)
-{
-	return ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
-}
-
-/**
- *	ata_bmdma_stop - Stop PCI IDE BMDMA transfer
- *	@qc: Command we are ending DMA for
- *
- *	Clears the ATA_DMA_START flag in the dma control register
+ *	ata_exec_command - issue ATA command to host controller
+ *	@ap: port to which command is being issued
+ *	@tf: ATA taskfile register set
  *
- *	May be used as the bmdma_stop() entry in ata_port_operations.
+ *	Issues ATA command, with proper synchronization with interrupt
+ *	handler / other threads.
  *
  *	LOCKING:
  *	spin_lock_irqsave(host lock)
  */
-void ata_bmdma_stop(struct ata_queued_cmd *qc)
+void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf)
 {
-	struct ata_port *ap = qc->ap;
-	void __iomem *mmio = ap->ioaddr.bmdma_addr;
-
-	/* clear start/stop bit */
-	iowrite8(ioread8(mmio + ATA_DMA_CMD) & ~ATA_DMA_START,
-		 mmio + ATA_DMA_CMD);
+	DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command);
 
-	/* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
-	ata_altstatus(ap);        /* dummy read */
+	iowrite8(tf->command, ap->ioaddr.command_addr);
+	ata_pause(ap);
 }
 
 /**
@@ -495,7 +386,6 @@ void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc)
  *	LOCKING:
  *	Inherited from caller.
  */
-
 int ata_sff_port_start(struct ata_port *ap)
 {
 	if (ap->ioaddr.bmdma_addr)
@@ -503,20 +393,149 @@ int ata_sff_port_start(struct ata_port *ap)
 	return 0;
 }
 
+/**
+ *	ata_bmdma_setup - Set up PCI IDE BMDMA transaction
+ *	@qc: Info associated with this ATA transaction.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ */
+void ata_bmdma_setup(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
+	u8 dmactl;
+
+	/* load PRD table addr. */
+	mb();	/* make sure PRD table writes are visible to controller */
+	iowrite32(ap->prd_dma, ap->ioaddr.bmdma_addr + ATA_DMA_TABLE_OFS);
+
+	/* specify data direction, triple-check start bit is clear */
+	dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
+	dmactl &= ~(ATA_DMA_WR | ATA_DMA_START);
+	if (!rw)
+		dmactl |= ATA_DMA_WR;
+	iowrite8(dmactl, ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
+
+	/* issue r/w command */
+	ap->ops->exec_command(ap, &qc->tf);
+}
+
+/**
+ *	ata_bmdma_start - Start a PCI IDE BMDMA transaction
+ *	@qc: Info associated with this ATA transaction.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ */
+void ata_bmdma_start(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	u8 dmactl;
+
+	/* start host DMA transaction */
+	dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
+	iowrite8(dmactl | ATA_DMA_START, ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
+
+	/* Strictly, one may wish to issue an ioread8() here, to
+	 * flush the mmio write.  However, control also passes
+	 * to the hardware at this point, and it will interrupt
+	 * us when we are to resume control.  So, in effect,
+	 * we don't care when the mmio write flushes.
+	 * Further, a read of the DMA status register _immediately_
+	 * following the write may not be what certain flaky hardware
+	 * is expected, so I think it is best to not add a readb()
+	 * without first all the MMIO ATA cards/mobos.
+	 * Or maybe I'm just being paranoid.
+	 *
+	 * FIXME: The posting of this write means I/O starts are
+	 * unneccessarily delayed for MMIO
+	 */
+}
+
+/**
+ *	ata_bmdma_stop - Stop PCI IDE BMDMA transfer
+ *	@qc: Command we are ending DMA for
+ *
+ *	Clears the ATA_DMA_START flag in the dma control register
+ *
+ *	May be used as the bmdma_stop() entry in ata_port_operations.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ */
+void ata_bmdma_stop(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	void __iomem *mmio = ap->ioaddr.bmdma_addr;
+
+	/* clear start/stop bit */
+	iowrite8(ioread8(mmio + ATA_DMA_CMD) & ~ATA_DMA_START,
+		 mmio + ATA_DMA_CMD);
+
+	/* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
+	ata_altstatus(ap);        /* dummy read */
+}
+
+/**
+ *	ata_bmdma_status - Read PCI IDE BMDMA status
+ *	@ap: Port associated with this ATA transaction.
+ *
+ *	Read and return BMDMA status register.
+ *
+ *	May be used as the bmdma_status() entry in ata_port_operations.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ */
+u8 ata_bmdma_status(struct ata_port *ap)
+{
+	return ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
+}
+
+/**
+ *	ata_noop_irq_clear - Noop placeholder for irq_clear
+ *	@ap: Port associated with this ATA transaction.
+ */
+void ata_noop_irq_clear(struct ata_port *ap)
+{
+}
+
 #ifdef CONFIG_PCI
 
-static int ata_resources_present(struct pci_dev *pdev, int port)
+/**
+ *	ata_pci_clear_simplex	-	attempt to kick device out of simplex
+ *	@pdev: PCI device
+ *
+ *	Some PCI ATA devices report simplex mode but in fact can be told to
+ *	enter non simplex mode. This implements the necessary logic to
+ *	perform the task on such devices. Calling it on other devices will
+ *	have -undefined- behaviour.
+ */
+int ata_pci_clear_simplex(struct pci_dev *pdev)
 {
-	int i;
+	unsigned long bmdma = pci_resource_start(pdev, 4);
+	u8 simplex;
 
-	/* Check the PCI resources for this channel are enabled */
-	port = port * 2;
-	for (i = 0; i < 2; i ++) {
-		if (pci_resource_start(pdev, port + i) == 0 ||
-		    pci_resource_len(pdev, port + i) == 0)
-			return 0;
-	}
-	return 1;
+	if (bmdma == 0)
+		return -ENOENT;
+
+	simplex = inb(bmdma + 0x02);
+	outb(simplex & 0x60, bmdma + 0x02);
+	simplex = inb(bmdma + 0x02);
+	if (simplex & 0x80)
+		return -EOPNOTSUPP;
+	return 0;
+}
+
+unsigned long ata_pci_default_filter(struct ata_device *adev, unsigned long xfer_mask)
+{
+	/* Filter out DMA modes if the device has been configured by
+	   the BIOS as PIO only */
+
+	if (adev->link->ap->ioaddr.bmdma_addr == NULL)
+		xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
+	return xfer_mask;
 }
 
 /**
@@ -576,6 +595,20 @@ int ata_pci_init_bmdma(struct ata_host *host)
 	return 0;
 }
 
+static int ata_resources_present(struct pci_dev *pdev, int port)
+{
+	int i;
+
+	/* Check the PCI resources for this channel are enabled */
+	port = port * 2;
+	for (i = 0; i < 2; i ++) {
+		if (pci_resource_start(pdev, port + i) == 0 ||
+		    pci_resource_len(pdev, port + i) == 0)
+			return 0;
+	}
+	return 1;
+}
+
 /**
  *	ata_pci_init_sff_host - acquire native PCI ATA resources and init host
  *	@host: target ATA host
@@ -879,41 +912,5 @@ int ata_pci_init_one(struct pci_dev *pdev,
 	return rc;
 }
 
-/**
- *	ata_pci_clear_simplex	-	attempt to kick device out of simplex
- *	@pdev: PCI device
- *
- *	Some PCI ATA devices report simplex mode but in fact can be told to
- *	enter non simplex mode. This implements the necessary logic to
- *	perform the task on such devices. Calling it on other devices will
- *	have -undefined- behaviour.
- */
-
-int ata_pci_clear_simplex(struct pci_dev *pdev)
-{
-	unsigned long bmdma = pci_resource_start(pdev, 4);
-	u8 simplex;
-
-	if (bmdma == 0)
-		return -ENOENT;
-
-	simplex = inb(bmdma + 0x02);
-	outb(simplex & 0x60, bmdma + 0x02);
-	simplex = inb(bmdma + 0x02);
-	if (simplex & 0x80)
-		return -EOPNOTSUPP;
-	return 0;
-}
-
-unsigned long ata_pci_default_filter(struct ata_device *adev, unsigned long xfer_mask)
-{
-	/* Filter out DMA modes if the device has been configured by
-	   the BIOS as PIO only */
-
-	if (adev->link->ap->ioaddr.bmdma_addr == NULL)
-		xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
-	return xfer_mask;
-}
-
 #endif /* CONFIG_PCI */
 
-- 
cgit v1.2.2


From 624d5c514eed18d5a93062e9d86d67065175f30a Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Tue, 25 Mar 2008 22:16:41 +0900
Subject: libata: reorganize SFF related stuff

* Move SFF related functions from libata-core.c to libata-sff.c.

  ata_[bmdma_]sff_port_ops, ata_devchk(), ata_dev_try_classify(),
  ata_std_dev_select(), ata_tf_to_host(), ata_busy_sleep(),
  ata_wait_after_reset(), ata_wait_ready(), ata_bus_post_reset(),
  ata_bus_softreset(), ata_bus_reset(), ata_std_softreset(),
  sata_std_hardreset(), ata_fill_sg(), ata_fill_sg_dumb(),
  ata_qc_prep(), ata_dump_qc_prep(), ata_data_xfer(),
  ata_data_xfer_noirq(), ata_pio_sector(), ata_pio_sectors(),
  atapi_send_cdb(), __atapi_pio_bytes(), atapi_pio_bytes(),
  ata_hsm_ok_in_wq(), ata_hsm_qc_complete(), ata_hsm_move(),
  ata_pio_task(), ata_qc_issue_prot(), ata_host_intr(),
  ata_interrupt(), ata_std_ports()

* Make ata_pio_queue_task() global as it's now called from
  libata-sff.c.

* Move SFF related stuff in include/linux/libata.h and
  drivers/ata/libata.h into one place.  While at it, move timing
  constants into the global enum definition and fortify comments a
  bit.

This patch strictly moves stuff around and as such doesn't cause any
functional difference.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/libata-core.c | 2114 +++-----------------------------------------
 drivers/ata/libata-sff.c  | 2151 +++++++++++++++++++++++++++++++++++++++++----
 drivers/ata/libata.h      |    8 +-
 3 files changed, 2131 insertions(+), 2142 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 7860d9f60ae4..34c068f18350 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -46,7 +46,6 @@
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/mm.h>
-#include <linux/highmem.h>
 #include <linux/spinlock.h>
 #include <linux/blkdev.h>
 #include <linux/delay.h>
@@ -98,41 +97,6 @@ const struct ata_port_operations sata_pmp_port_ops = {
 	.error_handler		= sata_pmp_error_handler,
 };
 
-const struct ata_port_operations ata_sff_port_ops = {
-	.inherits		= &ata_base_port_ops,
-
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
-	.softreset		= ata_std_softreset,
-	.error_handler		= ata_bmdma_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-
-	.dev_select		= ata_std_dev_select,
-	.check_status		= ata_check_status,
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.exec_command		= ata_exec_command,
-	.data_xfer		= ata_data_xfer,
-	.irq_on			= ata_irq_on,
-
-	.port_start		= ata_sff_port_start,
-};
-
-const struct ata_port_operations ata_bmdma_port_ops = {
-	.inherits		= &ata_sff_port_ops,
-
-	.mode_filter		= ata_pci_default_filter,
-
-	.bmdma_setup		= ata_bmdma_setup,
-	.bmdma_start		= ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-	.irq_clear		= ata_bmdma_irq_clear,
-};
-
 static unsigned int ata_dev_init_params(struct ata_device *dev,
 					u16 heads, u16 sectors);
 static unsigned int ata_dev_set_xfermode(struct ata_device *dev);
@@ -422,6 +386,14 @@ int atapi_cmd_type(u8 opcode)
 	}
 }
 
+/**
+ *	ata_noop_irq_clear - Noop placeholder for irq_clear
+ *	@ap: Port associated with this ATA transaction.
+ */
+void ata_noop_irq_clear(struct ata_port *ap)
+{
+}
+
 /**
  *	ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure
  *	@tf: Taskfile to convert
@@ -1102,50 +1074,6 @@ static void ata_lpm_disable(struct ata_host *host)
 }
 #endif	/* CONFIG_PM */
 
-
-/**
- *	ata_devchk - PATA device presence detection
- *	@ap: ATA channel to examine
- *	@device: Device to examine (starting at zero)
- *
- *	This technique was originally described in
- *	Hale Landis's ATADRVR (www.ata-atapi.com), and
- *	later found its way into the ATA/ATAPI spec.
- *
- *	Write a pattern to the ATA shadow registers,
- *	and if a device is present, it will respond by
- *	correctly storing and echoing back the
- *	ATA shadow register contents.
- *
- *	LOCKING:
- *	caller.
- */
-
-static unsigned int ata_devchk(struct ata_port *ap, unsigned int device)
-{
-	struct ata_ioports *ioaddr = &ap->ioaddr;
-	u8 nsect, lbal;
-
-	ap->ops->dev_select(ap, device);
-
-	iowrite8(0x55, ioaddr->nsect_addr);
-	iowrite8(0xaa, ioaddr->lbal_addr);
-
-	iowrite8(0xaa, ioaddr->nsect_addr);
-	iowrite8(0x55, ioaddr->lbal_addr);
-
-	iowrite8(0x55, ioaddr->nsect_addr);
-	iowrite8(0xaa, ioaddr->lbal_addr);
-
-	nsect = ioread8(ioaddr->nsect_addr);
-	lbal = ioread8(ioaddr->lbal_addr);
-
-	if ((nsect == 0x55) && (lbal == 0xaa))
-		return 1;	/* we found a device */
-
-	return 0;		/* nothing found */
-}
-
 /**
  *	ata_dev_classify - determine device type based on ATA-spec signature
  *	@tf: ATA taskfile register set for device to be identified
@@ -1205,75 +1133,6 @@ unsigned int ata_dev_classify(const struct ata_taskfile *tf)
 	return ATA_DEV_UNKNOWN;
 }
 
-/**
- *	ata_dev_try_classify - Parse returned ATA device signature
- *	@dev: ATA device to classify (starting at zero)
- *	@present: device seems present
- *	@r_err: Value of error register on completion
- *
- *	After an event -- SRST, E.D.D., or SATA COMRESET -- occurs,
- *	an ATA/ATAPI-defined set of values is placed in the ATA
- *	shadow registers, indicating the results of device detection
- *	and diagnostics.
- *
- *	Select the ATA device, and read the values from the ATA shadow
- *	registers.  Then parse according to the Error register value,
- *	and the spec-defined values examined by ata_dev_classify().
- *
- *	LOCKING:
- *	caller.
- *
- *	RETURNS:
- *	Device type - %ATA_DEV_ATA, %ATA_DEV_ATAPI or %ATA_DEV_NONE.
- */
-unsigned int ata_dev_try_classify(struct ata_device *dev, int present,
-				  u8 *r_err)
-{
-	struct ata_port *ap = dev->link->ap;
-	struct ata_taskfile tf;
-	unsigned int class;
-	u8 err;
-
-	ap->ops->dev_select(ap, dev->devno);
-
-	memset(&tf, 0, sizeof(tf));
-
-	ap->ops->tf_read(ap, &tf);
-	err = tf.feature;
-	if (r_err)
-		*r_err = err;
-
-	/* see if device passed diags: continue and warn later */
-	if (err == 0)
-		/* diagnostic fail : do nothing _YET_ */
-		dev->horkage |= ATA_HORKAGE_DIAGNOSTIC;
-	else if (err == 1)
-		/* do nothing */ ;
-	else if ((dev->devno == 0) && (err == 0x81))
-		/* do nothing */ ;
-	else
-		return ATA_DEV_NONE;
-
-	/* determine if device is ATA or ATAPI */
-	class = ata_dev_classify(&tf);
-
-	if (class == ATA_DEV_UNKNOWN) {
-		/* If the device failed diagnostic, it's likely to
-		 * have reported incorrect device signature too.
-		 * Assume ATA device if the device seems present but
-		 * device signature is invalid with diagnostic
-		 * failure.
-		 */
-		if (present && (dev->horkage & ATA_HORKAGE_DIAGNOSTIC))
-			class = ATA_DEV_ATA;
-		else
-			class = ATA_DEV_NONE;
-	} else if ((class == ATA_DEV_ATA) && (ata_chk_status(ap) == 0))
-		class = ATA_DEV_NONE;
-
-	return class;
-}
-
 /**
  *	ata_id_string - Convert IDENTIFY DEVICE page into string
  *	@id: IDENTIFY DEVICE results we will examine
@@ -1597,73 +1456,6 @@ void ata_noop_dev_select(struct ata_port *ap, unsigned int device)
 {
 }
 
-
-/**
- *	ata_std_dev_select - Select device 0/1 on ATA bus
- *	@ap: ATA channel to manipulate
- *	@device: ATA device (numbered from zero) to select
- *
- *	Use the method defined in the ATA specification to
- *	make either device 0, or device 1, active on the
- *	ATA channel.  Works with both PIO and MMIO.
- *
- *	May be used as the dev_select() entry in ata_port_operations.
- *
- *	LOCKING:
- *	caller.
- */
-
-void ata_std_dev_select(struct ata_port *ap, unsigned int device)
-{
-	u8 tmp;
-
-	if (device == 0)
-		tmp = ATA_DEVICE_OBS;
-	else
-		tmp = ATA_DEVICE_OBS | ATA_DEV1;
-
-	iowrite8(tmp, ap->ioaddr.device_addr);
-	ata_pause(ap);		/* needed; also flushes, for mmio */
-}
-
-/**
- *	ata_dev_select - Select device 0/1 on ATA bus
- *	@ap: ATA channel to manipulate
- *	@device: ATA device (numbered from zero) to select
- *	@wait: non-zero to wait for Status register BSY bit to clear
- *	@can_sleep: non-zero if context allows sleeping
- *
- *	Use the method defined in the ATA specification to
- *	make either device 0, or device 1, active on the
- *	ATA channel.
- *
- *	This is a high-level version of ata_std_dev_select(),
- *	which additionally provides the services of inserting
- *	the proper pauses and status polling, where needed.
- *
- *	LOCKING:
- *	caller.
- */
-
-void ata_dev_select(struct ata_port *ap, unsigned int device,
-			   unsigned int wait, unsigned int can_sleep)
-{
-	if (ata_msg_probe(ap))
-		ata_port_printk(ap, KERN_INFO, "ata_dev_select: ENTER, "
-				"device %u, wait %u\n", device, wait);
-
-	if (wait)
-		ata_wait_idle(ap);
-
-	ap->ops->dev_select(ap, device);
-
-	if (wait) {
-		if (can_sleep && ap->link.device[device].class == ATA_DEV_ATAPI)
-			msleep(150);
-		ata_wait_idle(ap);
-	}
-}
-
 /**
  *	ata_dump_id - IDENTIFY DEVICE info debugging output
  *	@id: IDENTIFY DEVICE page to dump
@@ -1791,8 +1583,7 @@ unsigned long ata_id_xfermask(const u16 *id)
  *	LOCKING:
  *	Inherited from caller.
  */
-static void ata_pio_queue_task(struct ata_port *ap, void *data,
-			       unsigned long delay)
+void ata_pio_queue_task(struct ata_port *ap, void *data, unsigned long delay)
 {
 	ap->port_task_data = data;
 
@@ -3531,353 +3322,6 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
 	return rc;
 }
 
-/**
- *	ata_tf_to_host - issue ATA taskfile to host controller
- *	@ap: port to which command is being issued
- *	@tf: ATA taskfile register set
- *
- *	Issues ATA taskfile register set to ATA host controller,
- *	with proper synchronization with interrupt handler and
- *	other threads.
- *
- *	LOCKING:
- *	spin_lock_irqsave(host lock)
- */
-
-static inline void ata_tf_to_host(struct ata_port *ap,
-				  const struct ata_taskfile *tf)
-{
-	ap->ops->tf_load(ap, tf);
-	ap->ops->exec_command(ap, tf);
-}
-
-/**
- *	ata_busy_sleep - sleep until BSY clears, or timeout
- *	@ap: port containing status register to be polled
- *	@tmout_pat: impatience timeout
- *	@tmout: overall timeout
- *
- *	Sleep until ATA Status register bit BSY clears,
- *	or a timeout occurs.
- *
- *	LOCKING:
- *	Kernel thread context (may sleep).
- *
- *	RETURNS:
- *	0 on success, -errno otherwise.
- */
-int ata_busy_sleep(struct ata_port *ap,
-		   unsigned long tmout_pat, unsigned long tmout)
-{
-	unsigned long timer_start, timeout;
-	u8 status;
-
-	status = ata_busy_wait(ap, ATA_BUSY, 300);
-	timer_start = jiffies;
-	timeout = timer_start + tmout_pat;
-	while (status != 0xff && (status & ATA_BUSY) &&
-	       time_before(jiffies, timeout)) {
-		msleep(50);
-		status = ata_busy_wait(ap, ATA_BUSY, 3);
-	}
-
-	if (status != 0xff && (status & ATA_BUSY))
-		ata_port_printk(ap, KERN_WARNING,
-				"port is slow to respond, please be patient "
-				"(Status 0x%x)\n", status);
-
-	timeout = timer_start + tmout;
-	while (status != 0xff && (status & ATA_BUSY) &&
-	       time_before(jiffies, timeout)) {
-		msleep(50);
-		status = ata_chk_status(ap);
-	}
-
-	if (status == 0xff)
-		return -ENODEV;
-
-	if (status & ATA_BUSY) {
-		ata_port_printk(ap, KERN_ERR, "port failed to respond "
-				"(%lu secs, Status 0x%x)\n",
-				tmout / HZ, status);
-		return -EBUSY;
-	}
-
-	return 0;
-}
-
-/**
- *	ata_wait_after_reset - wait before checking status after reset
- *	@ap: port containing status register to be polled
- *	@deadline: deadline jiffies for the operation
- *
- *	After reset, we need to pause a while before reading status.
- *	Also, certain combination of controller and device report 0xff
- *	for some duration (e.g. until SATA PHY is up and running)
- *	which is interpreted as empty port in ATA world.  This
- *	function also waits for such devices to get out of 0xff
- *	status.
- *
- *	LOCKING:
- *	Kernel thread context (may sleep).
- */
-void ata_wait_after_reset(struct ata_port *ap, unsigned long deadline)
-{
-	unsigned long until = jiffies + ATA_TMOUT_FF_WAIT;
-
-	if (time_before(until, deadline))
-		deadline = until;
-
-	/* Spec mandates ">= 2ms" before checking status.  We wait
-	 * 150ms, because that was the magic delay used for ATAPI
-	 * devices in Hale Landis's ATADRVR, for the period of time
-	 * between when the ATA command register is written, and then
-	 * status is checked.  Because waiting for "a while" before
-	 * checking status is fine, post SRST, we perform this magic
-	 * delay here as well.
-	 *
-	 * Old drivers/ide uses the 2mS rule and then waits for ready.
-	 */
-	msleep(150);
-
-	/* Wait for 0xff to clear.  Some SATA devices take a long time
-	 * to clear 0xff after reset.  For example, HHD424020F7SV00
-	 * iVDR needs >= 800ms while.  Quantum GoVault needs even more
-	 * than that.
-	 *
-	 * Note that some PATA controllers (pata_ali) explode if
-	 * status register is read more than once when there's no
-	 * device attached.
-	 */
-	if (ap->flags & ATA_FLAG_SATA) {
-		while (1) {
-			u8 status = ata_chk_status(ap);
-
-			if (status != 0xff || time_after(jiffies, deadline))
-				return;
-
-			msleep(50);
-		}
-	}
-}
-
-/**
- *	ata_wait_ready - sleep until BSY clears, or timeout
- *	@ap: port containing status register to be polled
- *	@deadline: deadline jiffies for the operation
- *
- *	Sleep until ATA Status register bit BSY clears, or timeout
- *	occurs.
- *
- *	LOCKING:
- *	Kernel thread context (may sleep).
- *
- *	RETURNS:
- *	0 on success, -errno otherwise.
- */
-int ata_wait_ready(struct ata_port *ap, unsigned long deadline)
-{
-	unsigned long start = jiffies;
-	int warned = 0;
-
-	while (1) {
-		u8 status = ata_chk_status(ap);
-		unsigned long now = jiffies;
-
-		if (!(status & ATA_BUSY))
-			return 0;
-		if (!ata_link_online(&ap->link) && status == 0xff)
-			return -ENODEV;
-		if (time_after(now, deadline))
-			return -EBUSY;
-
-		if (!warned && time_after(now, start + 5 * HZ) &&
-		    (deadline - now > 3 * HZ)) {
-			ata_port_printk(ap, KERN_WARNING,
-				"port is slow to respond, please be patient "
-				"(Status 0x%x)\n", status);
-			warned = 1;
-		}
-
-		msleep(50);
-	}
-}
-
-static int ata_bus_post_reset(struct ata_port *ap, unsigned int devmask,
-			      unsigned long deadline)
-{
-	struct ata_ioports *ioaddr = &ap->ioaddr;
-	unsigned int dev0 = devmask & (1 << 0);
-	unsigned int dev1 = devmask & (1 << 1);
-	int rc, ret = 0;
-
-	/* if device 0 was found in ata_devchk, wait for its
-	 * BSY bit to clear
-	 */
-	if (dev0) {
-		rc = ata_wait_ready(ap, deadline);
-		if (rc) {
-			if (rc != -ENODEV)
-				return rc;
-			ret = rc;
-		}
-	}
-
-	/* if device 1 was found in ata_devchk, wait for register
-	 * access briefly, then wait for BSY to clear.
-	 */
-	if (dev1) {
-		int i;
-
-		ap->ops->dev_select(ap, 1);
-
-		/* Wait for register access.  Some ATAPI devices fail
-		 * to set nsect/lbal after reset, so don't waste too
-		 * much time on it.  We're gonna wait for !BSY anyway.
-		 */
-		for (i = 0; i < 2; i++) {
-			u8 nsect, lbal;
-
-			nsect = ioread8(ioaddr->nsect_addr);
-			lbal = ioread8(ioaddr->lbal_addr);
-			if ((nsect == 1) && (lbal == 1))
-				break;
-			msleep(50);	/* give drive a breather */
-		}
-
-		rc = ata_wait_ready(ap, deadline);
-		if (rc) {
-			if (rc != -ENODEV)
-				return rc;
-			ret = rc;
-		}
-	}
-
-	/* is all this really necessary? */
-	ap->ops->dev_select(ap, 0);
-	if (dev1)
-		ap->ops->dev_select(ap, 1);
-	if (dev0)
-		ap->ops->dev_select(ap, 0);
-
-	return ret;
-}
-
-static int ata_bus_softreset(struct ata_port *ap, unsigned int devmask,
-			     unsigned long deadline)
-{
-	struct ata_ioports *ioaddr = &ap->ioaddr;
-
-	DPRINTK("ata%u: bus reset via SRST\n", ap->print_id);
-
-	/* software reset.  causes dev0 to be selected */
-	iowrite8(ap->ctl, ioaddr->ctl_addr);
-	udelay(20);	/* FIXME: flush */
-	iowrite8(ap->ctl | ATA_SRST, ioaddr->ctl_addr);
-	udelay(20);	/* FIXME: flush */
-	iowrite8(ap->ctl, ioaddr->ctl_addr);
-
-	/* wait a while before checking status */
-	ata_wait_after_reset(ap, deadline);
-
-	/* Before we perform post reset processing we want to see if
-	 * the bus shows 0xFF because the odd clown forgets the D7
-	 * pulldown resistor.
-	 */
-	if (ata_chk_status(ap) == 0xFF)
-		return -ENODEV;
-
-	return ata_bus_post_reset(ap, devmask, deadline);
-}
-
-/**
- *	ata_bus_reset - reset host port and associated ATA channel
- *	@ap: port to reset
- *
- *	This is typically the first time we actually start issuing
- *	commands to the ATA channel.  We wait for BSY to clear, then
- *	issue EXECUTE DEVICE DIAGNOSTIC command, polling for its
- *	result.  Determine what devices, if any, are on the channel
- *	by looking at the device 0/1 error register.  Look at the signature
- *	stored in each device's taskfile registers, to determine if
- *	the device is ATA or ATAPI.
- *
- *	LOCKING:
- *	PCI/etc. bus probe sem.
- *	Obtains host lock.
- *
- *	SIDE EFFECTS:
- *	Sets ATA_FLAG_DISABLED if bus reset fails.
- */
-
-void ata_bus_reset(struct ata_port *ap)
-{
-	struct ata_device *device = ap->link.device;
-	struct ata_ioports *ioaddr = &ap->ioaddr;
-	unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
-	u8 err;
-	unsigned int dev0, dev1 = 0, devmask = 0;
-	int rc;
-
-	DPRINTK("ENTER, host %u, port %u\n", ap->print_id, ap->port_no);
-
-	/* determine if device 0/1 are present */
-	if (ap->flags & ATA_FLAG_SATA_RESET)
-		dev0 = 1;
-	else {
-		dev0 = ata_devchk(ap, 0);
-		if (slave_possible)
-			dev1 = ata_devchk(ap, 1);
-	}
-
-	if (dev0)
-		devmask |= (1 << 0);
-	if (dev1)
-		devmask |= (1 << 1);
-
-	/* select device 0 again */
-	ap->ops->dev_select(ap, 0);
-
-	/* issue bus reset */
-	if (ap->flags & ATA_FLAG_SRST) {
-		rc = ata_bus_softreset(ap, devmask, jiffies + 40 * HZ);
-		if (rc && rc != -ENODEV)
-			goto err_out;
-	}
-
-	/*
-	 * determine by signature whether we have ATA or ATAPI devices
-	 */
-	device[0].class = ata_dev_try_classify(&device[0], dev0, &err);
-	if ((slave_possible) && (err != 0x81))
-		device[1].class = ata_dev_try_classify(&device[1], dev1, &err);
-
-	/* is double-select really necessary? */
-	if (device[1].class != ATA_DEV_NONE)
-		ap->ops->dev_select(ap, 1);
-	if (device[0].class != ATA_DEV_NONE)
-		ap->ops->dev_select(ap, 0);
-
-	/* if no devices were detected, disable this port */
-	if ((device[0].class == ATA_DEV_NONE) &&
-	    (device[1].class == ATA_DEV_NONE))
-		goto err_out;
-
-	if (ap->flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST)) {
-		/* set up device control for ATA_FLAG_SATA_RESET */
-		iowrite8(ap->ctl, ioaddr->ctl_addr);
-	}
-
-	DPRINTK("EXIT\n");
-	return;
-
-err_out:
-	ata_port_printk(ap, KERN_ERR, "disabling port\n");
-	ata_port_disable(ap);
-
-	DPRINTK("EXIT\n");
-}
-
 /**
  *	sata_link_debounce - debounce SATA phy status
  *	@link: ATA link to debounce SATA phy status for
@@ -4034,12 +3478,12 @@ int ata_std_prereset(struct ata_link *link, unsigned long deadline)
 }
 
 /**
- *	ata_std_softreset - reset host port via ATA SRST
- *	@link: ATA link to reset
- *	@classes: resulting classes of attached devices
+ *	sata_link_hardreset - reset link via SATA phy reset
+ *	@link: link to reset
+ *	@timing: timing parameters { interval, duratinon, timeout } in msec
  *	@deadline: deadline jiffies for the operation
  *
- *	Reset host port using ATA SRST.
+ *	SATA phy-reset @link using DET bits of SControl register.
  *
  *	LOCKING:
  *	Kernel thread context (may sleep)
@@ -4047,70 +3491,10 @@ int ata_std_prereset(struct ata_link *link, unsigned long deadline)
  *	RETURNS:
  *	0 on success, -errno otherwise.
  */
-int ata_std_softreset(struct ata_link *link, unsigned int *classes,
-		      unsigned long deadline)
+int sata_link_hardreset(struct ata_link *link, const unsigned long *timing,
+			unsigned long deadline)
 {
-	struct ata_port *ap = link->ap;
-	unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
-	unsigned int devmask = 0;
-	int rc;
-	u8 err;
-
-	DPRINTK("ENTER\n");
-
-	if (ata_link_offline(link)) {
-		classes[0] = ATA_DEV_NONE;
-		goto out;
-	}
-
-	/* determine if device 0/1 are present */
-	if (ata_devchk(ap, 0))
-		devmask |= (1 << 0);
-	if (slave_possible && ata_devchk(ap, 1))
-		devmask |= (1 << 1);
-
-	/* select device 0 again */
-	ap->ops->dev_select(ap, 0);
-
-	/* issue bus reset */
-	DPRINTK("about to softreset, devmask=%x\n", devmask);
-	rc = ata_bus_softreset(ap, devmask, deadline);
-	/* if link is occupied, -ENODEV too is an error */
-	if (rc && (rc != -ENODEV || sata_scr_valid(link))) {
-		ata_link_printk(link, KERN_ERR, "SRST failed (errno=%d)\n", rc);
-		return rc;
-	}
-
-	/* determine by signature whether we have ATA or ATAPI devices */
-	classes[0] = ata_dev_try_classify(&link->device[0],
-					  devmask & (1 << 0), &err);
-	if (slave_possible && err != 0x81)
-		classes[1] = ata_dev_try_classify(&link->device[1],
-						  devmask & (1 << 1), &err);
-
- out:
-	DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]);
-	return 0;
-}
-
-/**
- *	sata_link_hardreset - reset link via SATA phy reset
- *	@link: link to reset
- *	@timing: timing parameters { interval, duratinon, timeout } in msec
- *	@deadline: deadline jiffies for the operation
- *
- *	SATA phy-reset @link using DET bits of SControl register.
- *
- *	LOCKING:
- *	Kernel thread context (may sleep)
- *
- *	RETURNS:
- *	0 on success, -errno otherwise.
- */
-int sata_link_hardreset(struct ata_link *link, const unsigned long *timing,
-			unsigned long deadline)
-{
-	u32 scontrol;
+	u32 scontrol;
 	int rc;
 
 	DPRINTK("ENTER\n");
@@ -4153,74 +3537,6 @@ int sata_link_hardreset(struct ata_link *link, const unsigned long *timing,
 	return rc;
 }
 
-/**
- *	sata_std_hardreset - reset host port via SATA phy reset
- *	@link: link to reset
- *	@class: resulting class of attached device
- *	@deadline: deadline jiffies for the operation
- *
- *	SATA phy-reset host port using DET bits of SControl register,
- *	wait for !BSY and classify the attached device.
- *
- *	LOCKING:
- *	Kernel thread context (may sleep)
- *
- *	RETURNS:
- *	0 on success, -errno otherwise.
- */
-int sata_std_hardreset(struct ata_link *link, unsigned int *class,
-		       unsigned long deadline)
-{
-	struct ata_port *ap = link->ap;
-	const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
-	int rc;
-
-	DPRINTK("ENTER\n");
-
-	/* do hardreset */
-	rc = sata_link_hardreset(link, timing, deadline);
-	if (rc) {
-		ata_link_printk(link, KERN_ERR,
-				"COMRESET failed (errno=%d)\n", rc);
-		return rc;
-	}
-
-	/* TODO: phy layer with polling, timeouts, etc. */
-	if (ata_link_offline(link)) {
-		*class = ATA_DEV_NONE;
-		DPRINTK("EXIT, link offline\n");
-		return 0;
-	}
-
-	/* wait a while before checking status */
-	ata_wait_after_reset(ap, deadline);
-
-	/* If PMP is supported, we have to do follow-up SRST.  Note
-	 * that some PMPs don't send D2H Reg FIS after hardreset at
-	 * all if the first port is empty.  Wait for it just for a
-	 * second and request follow-up SRST.
-	 */
-	if (ap->flags & ATA_FLAG_PMP) {
-		ata_wait_ready(ap, jiffies + HZ);
-		return -EAGAIN;
-	}
-
-	rc = ata_wait_ready(ap, deadline);
-	/* link occupied, -ENODEV too is an error */
-	if (rc) {
-		ata_link_printk(link, KERN_ERR,
-				"COMRESET failed (errno=%d)\n", rc);
-		return rc;
-	}
-
-	ap->ops->dev_select(ap, 0);	/* probably unnecessary */
-
-	*class = ata_dev_try_classify(link->device, 1, NULL);
-
-	DPRINTK("EXIT, class=%u\n", *class);
-	return 0;
-}
-
 /**
  *	ata_std_postreset - standard postreset callback
  *	@link: the target ata_link
@@ -4803,112 +4119,6 @@ void ata_sg_clean(struct ata_queued_cmd *qc)
 	qc->sg = NULL;
 }
 
-/**
- *	ata_fill_sg - Fill PCI IDE PRD table
- *	@qc: Metadata associated with taskfile to be transferred
- *
- *	Fill PCI IDE PRD (scatter-gather) table with segments
- *	associated with the current disk command.
- *
- *	LOCKING:
- *	spin_lock_irqsave(host lock)
- *
- */
-static void ata_fill_sg(struct ata_queued_cmd *qc)
-{
-	struct ata_port *ap = qc->ap;
-	struct scatterlist *sg;
-	unsigned int si, pi;
-
-	pi = 0;
-	for_each_sg(qc->sg, sg, qc->n_elem, si) {
-		u32 addr, offset;
-		u32 sg_len, len;
-
-		/* determine if physical DMA addr spans 64K boundary.
-		 * Note h/w doesn't support 64-bit, so we unconditionally
-		 * truncate dma_addr_t to u32.
-		 */
-		addr = (u32) sg_dma_address(sg);
-		sg_len = sg_dma_len(sg);
-
-		while (sg_len) {
-			offset = addr & 0xffff;
-			len = sg_len;
-			if ((offset + sg_len) > 0x10000)
-				len = 0x10000 - offset;
-
-			ap->prd[pi].addr = cpu_to_le32(addr);
-			ap->prd[pi].flags_len = cpu_to_le32(len & 0xffff);
-			VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len);
-
-			pi++;
-			sg_len -= len;
-			addr += len;
-		}
-	}
-
-	ap->prd[pi - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
-}
-
-/**
- *	ata_fill_sg_dumb - Fill PCI IDE PRD table
- *	@qc: Metadata associated with taskfile to be transferred
- *
- *	Fill PCI IDE PRD (scatter-gather) table with segments
- *	associated with the current disk command. Perform the fill
- *	so that we avoid writing any length 64K records for
- *	controllers that don't follow the spec.
- *
- *	LOCKING:
- *	spin_lock_irqsave(host lock)
- *
- */
-static void ata_fill_sg_dumb(struct ata_queued_cmd *qc)
-{
-	struct ata_port *ap = qc->ap;
-	struct scatterlist *sg;
-	unsigned int si, pi;
-
-	pi = 0;
-	for_each_sg(qc->sg, sg, qc->n_elem, si) {
-		u32 addr, offset;
-		u32 sg_len, len, blen;
-
-		/* determine if physical DMA addr spans 64K boundary.
-		 * Note h/w doesn't support 64-bit, so we unconditionally
-		 * truncate dma_addr_t to u32.
-		 */
-		addr = (u32) sg_dma_address(sg);
-		sg_len = sg_dma_len(sg);
-
-		while (sg_len) {
-			offset = addr & 0xffff;
-			len = sg_len;
-			if ((offset + sg_len) > 0x10000)
-				len = 0x10000 - offset;
-
-			blen = len & 0xffff;
-			ap->prd[pi].addr = cpu_to_le32(addr);
-			if (blen == 0) {
-			   /* Some PATA chipsets like the CS5530 can't
-			      cope with 0x0000 meaning 64K as the spec says */
-				ap->prd[pi].flags_len = cpu_to_le32(0x8000);
-				blen = 0x8000;
-				ap->prd[++pi].addr = cpu_to_le32(addr + 0x8000);
-			}
-			ap->prd[pi].flags_len = cpu_to_le32(blen);
-			VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len);
-
-			pi++;
-			sg_len -= len;
-			addr += len;
-		}
-	}
-
-	ap->prd[pi - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
-}
-
 /**
  *	ata_check_atapi_dma - Check whether ATAPI DMA can be supported
  *	@qc: Metadata associated with taskfile to check
@@ -4918,858 +4128,132 @@ static void ata_fill_sg_dumb(struct ata_queued_cmd *qc)
  *	supplied PACKET command.
  *
  *	LOCKING:
- *	spin_lock_irqsave(host lock)
- *
- *	RETURNS: 0 when ATAPI DMA can be used
- *               nonzero otherwise
- */
-int ata_check_atapi_dma(struct ata_queued_cmd *qc)
-{
-	struct ata_port *ap = qc->ap;
-
-	/* Don't allow DMA if it isn't multiple of 16 bytes.  Quite a
-	 * few ATAPI devices choke on such DMA requests.
-	 */
-	if (unlikely(qc->nbytes & 15))
-		return 1;
-
-	if (ap->ops->check_atapi_dma)
-		return ap->ops->check_atapi_dma(qc);
-
-	return 0;
-}
-
-/**
- *	ata_std_qc_defer - Check whether a qc needs to be deferred
- *	@qc: ATA command in question
- *
- *	Non-NCQ commands cannot run with any other command, NCQ or
- *	not.  As upper layer only knows the queue depth, we are
- *	responsible for maintaining exclusion.  This function checks
- *	whether a new command @qc can be issued.
- *
- *	LOCKING:
- *	spin_lock_irqsave(host lock)
- *
- *	RETURNS:
- *	ATA_DEFER_* if deferring is needed, 0 otherwise.
- */
-int ata_std_qc_defer(struct ata_queued_cmd *qc)
-{
-	struct ata_link *link = qc->dev->link;
-
-	if (qc->tf.protocol == ATA_PROT_NCQ) {
-		if (!ata_tag_valid(link->active_tag))
-			return 0;
-	} else {
-		if (!ata_tag_valid(link->active_tag) && !link->sactive)
-			return 0;
-	}
-
-	return ATA_DEFER_LINK;
-}
-
-/**
- *	ata_qc_prep - Prepare taskfile for submission
- *	@qc: Metadata associated with taskfile to be prepared
- *
- *	Prepare ATA taskfile for submission.
- *
- *	LOCKING:
- *	spin_lock_irqsave(host lock)
- */
-void ata_qc_prep(struct ata_queued_cmd *qc)
-{
-	if (!(qc->flags & ATA_QCFLAG_DMAMAP))
-		return;
-
-	ata_fill_sg(qc);
-}
-
-/**
- *	ata_dumb_qc_prep - Prepare taskfile for submission
- *	@qc: Metadata associated with taskfile to be prepared
- *
- *	Prepare ATA taskfile for submission.
- *
- *	LOCKING:
- *	spin_lock_irqsave(host lock)
- */
-void ata_dumb_qc_prep(struct ata_queued_cmd *qc)
-{
-	if (!(qc->flags & ATA_QCFLAG_DMAMAP))
-		return;
-
-	ata_fill_sg_dumb(qc);
-}
-
-void ata_noop_qc_prep(struct ata_queued_cmd *qc) { }
-
-/**
- *	ata_sg_init - Associate command with scatter-gather table.
- *	@qc: Command to be associated
- *	@sg: Scatter-gather table.
- *	@n_elem: Number of elements in s/g table.
- *
- *	Initialize the data-related elements of queued_cmd @qc
- *	to point to a scatter-gather table @sg, containing @n_elem
- *	elements.
- *
- *	LOCKING:
- *	spin_lock_irqsave(host lock)
- */
-void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
-		 unsigned int n_elem)
-{
-	qc->sg = sg;
-	qc->n_elem = n_elem;
-	qc->cursg = qc->sg;
-}
-
-/**
- *	ata_sg_setup - DMA-map the scatter-gather table associated with a command.
- *	@qc: Command with scatter-gather table to be mapped.
- *
- *	DMA-map the scatter-gather table associated with queued_cmd @qc.
- *
- *	LOCKING:
- *	spin_lock_irqsave(host lock)
- *
- *	RETURNS:
- *	Zero on success, negative on error.
- *
- */
-static int ata_sg_setup(struct ata_queued_cmd *qc)
-{
-	struct ata_port *ap = qc->ap;
-	unsigned int n_elem;
-
-	VPRINTK("ENTER, ata%u\n", ap->print_id);
-
-	n_elem = dma_map_sg(ap->dev, qc->sg, qc->n_elem, qc->dma_dir);
-	if (n_elem < 1)
-		return -1;
-
-	DPRINTK("%d sg elements mapped\n", n_elem);
-
-	qc->n_elem = n_elem;
-	qc->flags |= ATA_QCFLAG_DMAMAP;
-
-	return 0;
-}
-
-/**
- *	swap_buf_le16 - swap halves of 16-bit words in place
- *	@buf:  Buffer to swap
- *	@buf_words:  Number of 16-bit words in buffer.
- *
- *	Swap halves of 16-bit words if needed to convert from
- *	little-endian byte order to native cpu byte order, or
- *	vice-versa.
- *
- *	LOCKING:
- *	Inherited from caller.
- */
-void swap_buf_le16(u16 *buf, unsigned int buf_words)
-{
-#ifdef __BIG_ENDIAN
-	unsigned int i;
-
-	for (i = 0; i < buf_words; i++)
-		buf[i] = le16_to_cpu(buf[i]);
-#endif /* __BIG_ENDIAN */
-}
-
-/**
- *	ata_data_xfer - Transfer data by PIO
- *	@dev: device to target
- *	@buf: data buffer
- *	@buflen: buffer length
- *	@rw: read/write
- *
- *	Transfer data from/to the device data register by PIO.
- *
- *	LOCKING:
- *	Inherited from caller.
- *
- *	RETURNS:
- *	Bytes consumed.
- */
-unsigned int ata_data_xfer(struct ata_device *dev, unsigned char *buf,
-			   unsigned int buflen, int rw)
-{
-	struct ata_port *ap = dev->link->ap;
-	void __iomem *data_addr = ap->ioaddr.data_addr;
-	unsigned int words = buflen >> 1;
-
-	/* Transfer multiple of 2 bytes */
-	if (rw == READ)
-		ioread16_rep(data_addr, buf, words);
-	else
-		iowrite16_rep(data_addr, buf, words);
-
-	/* Transfer trailing 1 byte, if any. */
-	if (unlikely(buflen & 0x01)) {
-		__le16 align_buf[1] = { 0 };
-		unsigned char *trailing_buf = buf + buflen - 1;
-
-		if (rw == READ) {
-			align_buf[0] = cpu_to_le16(ioread16(data_addr));
-			memcpy(trailing_buf, align_buf, 1);
-		} else {
-			memcpy(align_buf, trailing_buf, 1);
-			iowrite16(le16_to_cpu(align_buf[0]), data_addr);
-		}
-		words++;
-	}
-
-	return words << 1;
-}
-
-/**
- *	ata_data_xfer_noirq - Transfer data by PIO
- *	@dev: device to target
- *	@buf: data buffer
- *	@buflen: buffer length
- *	@rw: read/write
- *
- *	Transfer data from/to the device data register by PIO. Do the
- *	transfer with interrupts disabled.
- *
- *	LOCKING:
- *	Inherited from caller.
- *
- *	RETURNS:
- *	Bytes consumed.
- */
-unsigned int ata_data_xfer_noirq(struct ata_device *dev, unsigned char *buf,
-				 unsigned int buflen, int rw)
-{
-	unsigned long flags;
-	unsigned int consumed;
-
-	local_irq_save(flags);
-	consumed = ata_data_xfer(dev, buf, buflen, rw);
-	local_irq_restore(flags);
-
-	return consumed;
-}
-
-
-/**
- *	ata_pio_sector - Transfer a sector of data.
- *	@qc: Command on going
- *
- *	Transfer qc->sect_size bytes of data from/to the ATA device.
- *
- *	LOCKING:
- *	Inherited from caller.
- */
-
-static void ata_pio_sector(struct ata_queued_cmd *qc)
-{
-	int do_write = (qc->tf.flags & ATA_TFLAG_WRITE);
-	struct ata_port *ap = qc->ap;
-	struct page *page;
-	unsigned int offset;
-	unsigned char *buf;
-
-	if (qc->curbytes == qc->nbytes - qc->sect_size)
-		ap->hsm_task_state = HSM_ST_LAST;
-
-	page = sg_page(qc->cursg);
-	offset = qc->cursg->offset + qc->cursg_ofs;
-
-	/* get the current page and offset */
-	page = nth_page(page, (offset >> PAGE_SHIFT));
-	offset %= PAGE_SIZE;
-
-	DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read");
-
-	if (PageHighMem(page)) {
-		unsigned long flags;
-
-		/* FIXME: use a bounce buffer */
-		local_irq_save(flags);
-		buf = kmap_atomic(page, KM_IRQ0);
-
-		/* do the actual data transfer */
-		ap->ops->data_xfer(qc->dev, buf + offset, qc->sect_size, do_write);
-
-		kunmap_atomic(buf, KM_IRQ0);
-		local_irq_restore(flags);
-	} else {
-		buf = page_address(page);
-		ap->ops->data_xfer(qc->dev, buf + offset, qc->sect_size, do_write);
-	}
-
-	qc->curbytes += qc->sect_size;
-	qc->cursg_ofs += qc->sect_size;
-
-	if (qc->cursg_ofs == qc->cursg->length) {
-		qc->cursg = sg_next(qc->cursg);
-		qc->cursg_ofs = 0;
-	}
-}
-
-/**
- *	ata_pio_sectors - Transfer one or many sectors.
- *	@qc: Command on going
- *
- *	Transfer one or many sectors of data from/to the
- *	ATA device for the DRQ request.
- *
- *	LOCKING:
- *	Inherited from caller.
- */
-
-static void ata_pio_sectors(struct ata_queued_cmd *qc)
-{
-	if (is_multi_taskfile(&qc->tf)) {
-		/* READ/WRITE MULTIPLE */
-		unsigned int nsect;
-
-		WARN_ON(qc->dev->multi_count == 0);
-
-		nsect = min((qc->nbytes - qc->curbytes) / qc->sect_size,
-			    qc->dev->multi_count);
-		while (nsect--)
-			ata_pio_sector(qc);
-	} else
-		ata_pio_sector(qc);
-
-	ata_altstatus(qc->ap); /* flush */
-}
-
-/**
- *	atapi_send_cdb - Write CDB bytes to hardware
- *	@ap: Port to which ATAPI device is attached.
- *	@qc: Taskfile currently active
- *
- *	When device has indicated its readiness to accept
- *	a CDB, this function is called.  Send the CDB.
- *
- *	LOCKING:
- *	caller.
- */
-
-static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc)
-{
-	/* send SCSI cdb */
-	DPRINTK("send cdb\n");
-	WARN_ON(qc->dev->cdb_len < 12);
-
-	ap->ops->data_xfer(qc->dev, qc->cdb, qc->dev->cdb_len, 1);
-	ata_altstatus(ap); /* flush */
-
-	switch (qc->tf.protocol) {
-	case ATAPI_PROT_PIO:
-		ap->hsm_task_state = HSM_ST;
-		break;
-	case ATAPI_PROT_NODATA:
-		ap->hsm_task_state = HSM_ST_LAST;
-		break;
-	case ATAPI_PROT_DMA:
-		ap->hsm_task_state = HSM_ST_LAST;
-		/* initiate bmdma */
-		ap->ops->bmdma_start(qc);
-		break;
-	}
-}
-
-/**
- *	__atapi_pio_bytes - Transfer data from/to the ATAPI device.
- *	@qc: Command on going
- *	@bytes: number of bytes
- *
- *	Transfer Transfer data from/to the ATAPI device.
- *
- *	LOCKING:
- *	Inherited from caller.
- *
- */
-static int __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes)
-{
-	int rw = (qc->tf.flags & ATA_TFLAG_WRITE) ? WRITE : READ;
-	struct ata_port *ap = qc->ap;
-	struct ata_device *dev = qc->dev;
-	struct ata_eh_info *ehi = &dev->link->eh_info;
-	struct scatterlist *sg;
-	struct page *page;
-	unsigned char *buf;
-	unsigned int offset, count, consumed;
-
-next_sg:
-	sg = qc->cursg;
-	if (unlikely(!sg)) {
-		ata_ehi_push_desc(ehi, "unexpected or too much trailing data "
-				  "buf=%u cur=%u bytes=%u",
-				  qc->nbytes, qc->curbytes, bytes);
-		return -1;
-	}
-
-	page = sg_page(sg);
-	offset = sg->offset + qc->cursg_ofs;
-
-	/* get the current page and offset */
-	page = nth_page(page, (offset >> PAGE_SHIFT));
-	offset %= PAGE_SIZE;
-
-	/* don't overrun current sg */
-	count = min(sg->length - qc->cursg_ofs, bytes);
-
-	/* don't cross page boundaries */
-	count = min(count, (unsigned int)PAGE_SIZE - offset);
-
-	DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read");
-
-	if (PageHighMem(page)) {
-		unsigned long flags;
-
-		/* FIXME: use bounce buffer */
-		local_irq_save(flags);
-		buf = kmap_atomic(page, KM_IRQ0);
-
-		/* do the actual data transfer */
-		consumed = ap->ops->data_xfer(dev,  buf + offset, count, rw);
-
-		kunmap_atomic(buf, KM_IRQ0);
-		local_irq_restore(flags);
-	} else {
-		buf = page_address(page);
-		consumed = ap->ops->data_xfer(dev,  buf + offset, count, rw);
-	}
-
-	bytes -= min(bytes, consumed);
-	qc->curbytes += count;
-	qc->cursg_ofs += count;
-
-	if (qc->cursg_ofs == sg->length) {
-		qc->cursg = sg_next(qc->cursg);
-		qc->cursg_ofs = 0;
-	}
-
-	/* consumed can be larger than count only for the last transfer */
-	WARN_ON(qc->cursg && count != consumed);
-
-	if (bytes)
-		goto next_sg;
-	return 0;
-}
-
-/**
- *	atapi_pio_bytes - Transfer data from/to the ATAPI device.
- *	@qc: Command on going
- *
- *	Transfer Transfer data from/to the ATAPI device.
- *
- *	LOCKING:
- *	Inherited from caller.
- */
-
-static void atapi_pio_bytes(struct ata_queued_cmd *qc)
-{
-	struct ata_port *ap = qc->ap;
-	struct ata_device *dev = qc->dev;
-	struct ata_eh_info *ehi = &dev->link->eh_info;
-	unsigned int ireason, bc_lo, bc_hi, bytes;
-	int i_write, do_write = (qc->tf.flags & ATA_TFLAG_WRITE) ? 1 : 0;
-
-	/* Abuse qc->result_tf for temp storage of intermediate TF
-	 * here to save some kernel stack usage.
-	 * For normal completion, qc->result_tf is not relevant. For
-	 * error, qc->result_tf is later overwritten by ata_qc_complete().
-	 * So, the correctness of qc->result_tf is not affected.
-	 */
-	ap->ops->tf_read(ap, &qc->result_tf);
-	ireason = qc->result_tf.nsect;
-	bc_lo = qc->result_tf.lbam;
-	bc_hi = qc->result_tf.lbah;
-	bytes = (bc_hi << 8) | bc_lo;
-
-	/* shall be cleared to zero, indicating xfer of data */
-	if (unlikely(ireason & (1 << 0)))
-		goto atapi_check;
-
-	/* make sure transfer direction matches expected */
-	i_write = ((ireason & (1 << 1)) == 0) ? 1 : 0;
-	if (unlikely(do_write != i_write))
-		goto atapi_check;
-
-	if (unlikely(!bytes))
-		goto atapi_check;
-
-	VPRINTK("ata%u: xfering %d bytes\n", ap->print_id, bytes);
-
-	if (unlikely(__atapi_pio_bytes(qc, bytes)))
-		goto err_out;
-	ata_altstatus(ap); /* flush */
-
-	return;
-
- atapi_check:
-	ata_ehi_push_desc(ehi, "ATAPI check failed (ireason=0x%x bytes=%u)",
-			  ireason, bytes);
- err_out:
-	qc->err_mask |= AC_ERR_HSM;
-	ap->hsm_task_state = HSM_ST_ERR;
-}
-
-/**
- *	ata_hsm_ok_in_wq - Check if the qc can be handled in the workqueue.
- *	@ap: the target ata_port
- *	@qc: qc on going
- *
- *	RETURNS:
- *	1 if ok in workqueue, 0 otherwise.
- */
-
-static inline int ata_hsm_ok_in_wq(struct ata_port *ap, struct ata_queued_cmd *qc)
-{
-	if (qc->tf.flags & ATA_TFLAG_POLLING)
-		return 1;
-
-	if (ap->hsm_task_state == HSM_ST_FIRST) {
-		if (qc->tf.protocol == ATA_PROT_PIO &&
-		    (qc->tf.flags & ATA_TFLAG_WRITE))
-		    return 1;
-
-		if (ata_is_atapi(qc->tf.protocol) &&
-		    !(qc->dev->flags & ATA_DFLAG_CDB_INTR))
-			return 1;
-	}
-
-	return 0;
-}
-
-/**
- *	ata_hsm_qc_complete - finish a qc running on standard HSM
- *	@qc: Command to complete
- *	@in_wq: 1 if called from workqueue, 0 otherwise
- *
- *	Finish @qc which is running on standard HSM.
- *
- *	LOCKING:
- *	If @in_wq is zero, spin_lock_irqsave(host lock).
- *	Otherwise, none on entry and grabs host lock.
- */
-static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq)
-{
-	struct ata_port *ap = qc->ap;
-	unsigned long flags;
-
-	if (ap->ops->error_handler) {
-		if (in_wq) {
-			spin_lock_irqsave(ap->lock, flags);
-
-			/* EH might have kicked in while host lock is
-			 * released.
-			 */
-			qc = ata_qc_from_tag(ap, qc->tag);
-			if (qc) {
-				if (likely(!(qc->err_mask & AC_ERR_HSM))) {
-					ap->ops->irq_on(ap);
-					ata_qc_complete(qc);
-				} else
-					ata_port_freeze(ap);
-			}
-
-			spin_unlock_irqrestore(ap->lock, flags);
-		} else {
-			if (likely(!(qc->err_mask & AC_ERR_HSM)))
-				ata_qc_complete(qc);
-			else
-				ata_port_freeze(ap);
-		}
-	} else {
-		if (in_wq) {
-			spin_lock_irqsave(ap->lock, flags);
-			ap->ops->irq_on(ap);
-			ata_qc_complete(qc);
-			spin_unlock_irqrestore(ap->lock, flags);
-		} else
-			ata_qc_complete(qc);
-	}
-}
-
-/**
- *	ata_hsm_move - move the HSM to the next state.
- *	@ap: the target ata_port
- *	@qc: qc on going
- *	@status: current device status
- *	@in_wq: 1 if called from workqueue, 0 otherwise
- *
- *	RETURNS:
- *	1 when poll next status needed, 0 otherwise.
- */
-int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc,
-		 u8 status, int in_wq)
-{
-	unsigned long flags = 0;
-	int poll_next;
-
-	WARN_ON((qc->flags & ATA_QCFLAG_ACTIVE) == 0);
-
-	/* Make sure ata_qc_issue_prot() does not throw things
-	 * like DMA polling into the workqueue. Notice that
-	 * in_wq is not equivalent to (qc->tf.flags & ATA_TFLAG_POLLING).
-	 */
-	WARN_ON(in_wq != ata_hsm_ok_in_wq(ap, qc));
-
-fsm_start:
-	DPRINTK("ata%u: protocol %d task_state %d (dev_stat 0x%X)\n",
-		ap->print_id, qc->tf.protocol, ap->hsm_task_state, status);
-
-	switch (ap->hsm_task_state) {
-	case HSM_ST_FIRST:
-		/* Send first data block or PACKET CDB */
-
-		/* If polling, we will stay in the work queue after
-		 * sending the data. Otherwise, interrupt handler
-		 * takes over after sending the data.
-		 */
-		poll_next = (qc->tf.flags & ATA_TFLAG_POLLING);
-
-		/* check device status */
-		if (unlikely((status & ATA_DRQ) == 0)) {
-			/* handle BSY=0, DRQ=0 as error */
-			if (likely(status & (ATA_ERR | ATA_DF)))
-				/* device stops HSM for abort/error */
-				qc->err_mask |= AC_ERR_DEV;
-			else
-				/* HSM violation. Let EH handle this */
-				qc->err_mask |= AC_ERR_HSM;
-
-			ap->hsm_task_state = HSM_ST_ERR;
-			goto fsm_start;
-		}
-
-		/* Device should not ask for data transfer (DRQ=1)
-		 * when it finds something wrong.
-		 * We ignore DRQ here and stop the HSM by
-		 * changing hsm_task_state to HSM_ST_ERR and
-		 * let the EH abort the command or reset the device.
-		 */
-		if (unlikely(status & (ATA_ERR | ATA_DF))) {
-			/* Some ATAPI tape drives forget to clear the ERR bit
-			 * when doing the next command (mostly request sense).
-			 * We ignore ERR here to workaround and proceed sending
-			 * the CDB.
-			 */
-			if (!(qc->dev->horkage & ATA_HORKAGE_STUCK_ERR)) {
-				ata_port_printk(ap, KERN_WARNING,
-						"DRQ=1 with device error, "
-						"dev_stat 0x%X\n", status);
-				qc->err_mask |= AC_ERR_HSM;
-				ap->hsm_task_state = HSM_ST_ERR;
-				goto fsm_start;
-			}
-		}
-
-		/* Send the CDB (atapi) or the first data block (ata pio out).
-		 * During the state transition, interrupt handler shouldn't
-		 * be invoked before the data transfer is complete and
-		 * hsm_task_state is changed. Hence, the following locking.
-		 */
-		if (in_wq)
-			spin_lock_irqsave(ap->lock, flags);
-
-		if (qc->tf.protocol == ATA_PROT_PIO) {
-			/* PIO data out protocol.
-			 * send first data block.
-			 */
-
-			/* ata_pio_sectors() might change the state
-			 * to HSM_ST_LAST. so, the state is changed here
-			 * before ata_pio_sectors().
-			 */
-			ap->hsm_task_state = HSM_ST;
-			ata_pio_sectors(qc);
-		} else
-			/* send CDB */
-			atapi_send_cdb(ap, qc);
-
-		if (in_wq)
-			spin_unlock_irqrestore(ap->lock, flags);
-
-		/* if polling, ata_pio_task() handles the rest.
-		 * otherwise, interrupt handler takes over from here.
-		 */
-		break;
-
-	case HSM_ST:
-		/* complete command or read/write the data register */
-		if (qc->tf.protocol == ATAPI_PROT_PIO) {
-			/* ATAPI PIO protocol */
-			if ((status & ATA_DRQ) == 0) {
-				/* No more data to transfer or device error.
-				 * Device error will be tagged in HSM_ST_LAST.
-				 */
-				ap->hsm_task_state = HSM_ST_LAST;
-				goto fsm_start;
-			}
-
-			/* Device should not ask for data transfer (DRQ=1)
-			 * when it finds something wrong.
-			 * We ignore DRQ here and stop the HSM by
-			 * changing hsm_task_state to HSM_ST_ERR and
-			 * let the EH abort the command or reset the device.
-			 */
-			if (unlikely(status & (ATA_ERR | ATA_DF))) {
-				ata_port_printk(ap, KERN_WARNING, "DRQ=1 with "
-						"device error, dev_stat 0x%X\n",
-						status);
-				qc->err_mask |= AC_ERR_HSM;
-				ap->hsm_task_state = HSM_ST_ERR;
-				goto fsm_start;
-			}
-
-			atapi_pio_bytes(qc);
-
-			if (unlikely(ap->hsm_task_state == HSM_ST_ERR))
-				/* bad ireason reported by device */
-				goto fsm_start;
-
-		} else {
-			/* ATA PIO protocol */
-			if (unlikely((status & ATA_DRQ) == 0)) {
-				/* handle BSY=0, DRQ=0 as error */
-				if (likely(status & (ATA_ERR | ATA_DF)))
-					/* device stops HSM for abort/error */
-					qc->err_mask |= AC_ERR_DEV;
-				else
-					/* HSM violation. Let EH handle this.
-					 * Phantom devices also trigger this
-					 * condition.  Mark hint.
-					 */
-					qc->err_mask |= AC_ERR_HSM |
-							AC_ERR_NODEV_HINT;
-
-				ap->hsm_task_state = HSM_ST_ERR;
-				goto fsm_start;
-			}
-
-			/* For PIO reads, some devices may ask for
-			 * data transfer (DRQ=1) alone with ERR=1.
-			 * We respect DRQ here and transfer one
-			 * block of junk data before changing the
-			 * hsm_task_state to HSM_ST_ERR.
-			 *
-			 * For PIO writes, ERR=1 DRQ=1 doesn't make
-			 * sense since the data block has been
-			 * transferred to the device.
-			 */
-			if (unlikely(status & (ATA_ERR | ATA_DF))) {
-				/* data might be corrputed */
-				qc->err_mask |= AC_ERR_DEV;
-
-				if (!(qc->tf.flags & ATA_TFLAG_WRITE)) {
-					ata_pio_sectors(qc);
-					status = ata_wait_idle(ap);
-				}
-
-				if (status & (ATA_BUSY | ATA_DRQ))
-					qc->err_mask |= AC_ERR_HSM;
-
-				/* ata_pio_sectors() might change the
-				 * state to HSM_ST_LAST. so, the state
-				 * is changed after ata_pio_sectors().
-				 */
-				ap->hsm_task_state = HSM_ST_ERR;
-				goto fsm_start;
-			}
+ *	spin_lock_irqsave(host lock)
+ *
+ *	RETURNS: 0 when ATAPI DMA can be used
+ *               nonzero otherwise
+ */
+int ata_check_atapi_dma(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
 
-			ata_pio_sectors(qc);
+	/* Don't allow DMA if it isn't multiple of 16 bytes.  Quite a
+	 * few ATAPI devices choke on such DMA requests.
+	 */
+	if (unlikely(qc->nbytes & 15))
+		return 1;
 
-			if (ap->hsm_task_state == HSM_ST_LAST &&
-			    (!(qc->tf.flags & ATA_TFLAG_WRITE))) {
-				/* all data read */
-				status = ata_wait_idle(ap);
-				goto fsm_start;
-			}
-		}
+	if (ap->ops->check_atapi_dma)
+		return ap->ops->check_atapi_dma(qc);
 
-		poll_next = 1;
-		break;
+	return 0;
+}
 
-	case HSM_ST_LAST:
-		if (unlikely(!ata_ok(status))) {
-			qc->err_mask |= __ac_err_mask(status);
-			ap->hsm_task_state = HSM_ST_ERR;
-			goto fsm_start;
-		}
+/**
+ *	ata_std_qc_defer - Check whether a qc needs to be deferred
+ *	@qc: ATA command in question
+ *
+ *	Non-NCQ commands cannot run with any other command, NCQ or
+ *	not.  As upper layer only knows the queue depth, we are
+ *	responsible for maintaining exclusion.  This function checks
+ *	whether a new command @qc can be issued.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ *
+ *	RETURNS:
+ *	ATA_DEFER_* if deferring is needed, 0 otherwise.
+ */
+int ata_std_qc_defer(struct ata_queued_cmd *qc)
+{
+	struct ata_link *link = qc->dev->link;
 
-		/* no more data to transfer */
-		DPRINTK("ata%u: dev %u command complete, drv_stat 0x%x\n",
-			ap->print_id, qc->dev->devno, status);
+	if (qc->tf.protocol == ATA_PROT_NCQ) {
+		if (!ata_tag_valid(link->active_tag))
+			return 0;
+	} else {
+		if (!ata_tag_valid(link->active_tag) && !link->sactive)
+			return 0;
+	}
 
-		WARN_ON(qc->err_mask);
+	return ATA_DEFER_LINK;
+}
 
-		ap->hsm_task_state = HSM_ST_IDLE;
+void ata_noop_qc_prep(struct ata_queued_cmd *qc) { }
 
-		/* complete taskfile transaction */
-		ata_hsm_qc_complete(qc, in_wq);
+/**
+ *	ata_sg_init - Associate command with scatter-gather table.
+ *	@qc: Command to be associated
+ *	@sg: Scatter-gather table.
+ *	@n_elem: Number of elements in s/g table.
+ *
+ *	Initialize the data-related elements of queued_cmd @qc
+ *	to point to a scatter-gather table @sg, containing @n_elem
+ *	elements.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ */
+void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
+		 unsigned int n_elem)
+{
+	qc->sg = sg;
+	qc->n_elem = n_elem;
+	qc->cursg = qc->sg;
+}
 
-		poll_next = 0;
-		break;
+/**
+ *	ata_sg_setup - DMA-map the scatter-gather table associated with a command.
+ *	@qc: Command with scatter-gather table to be mapped.
+ *
+ *	DMA-map the scatter-gather table associated with queued_cmd @qc.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ *
+ *	RETURNS:
+ *	Zero on success, negative on error.
+ *
+ */
+static int ata_sg_setup(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	unsigned int n_elem;
 
-	case HSM_ST_ERR:
-		/* make sure qc->err_mask is available to
-		 * know what's wrong and recover
-		 */
-		WARN_ON(qc->err_mask == 0);
+	VPRINTK("ENTER, ata%u\n", ap->print_id);
 
-		ap->hsm_task_state = HSM_ST_IDLE;
+	n_elem = dma_map_sg(ap->dev, qc->sg, qc->n_elem, qc->dma_dir);
+	if (n_elem < 1)
+		return -1;
 
-		/* complete taskfile transaction */
-		ata_hsm_qc_complete(qc, in_wq);
+	DPRINTK("%d sg elements mapped\n", n_elem);
 
-		poll_next = 0;
-		break;
-	default:
-		poll_next = 0;
-		BUG();
-	}
+	qc->n_elem = n_elem;
+	qc->flags |= ATA_QCFLAG_DMAMAP;
 
-	return poll_next;
+	return 0;
 }
 
-static void ata_pio_task(struct work_struct *work)
+/**
+ *	swap_buf_le16 - swap halves of 16-bit words in place
+ *	@buf:  Buffer to swap
+ *	@buf_words:  Number of 16-bit words in buffer.
+ *
+ *	Swap halves of 16-bit words if needed to convert from
+ *	little-endian byte order to native cpu byte order, or
+ *	vice-versa.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+void swap_buf_le16(u16 *buf, unsigned int buf_words)
 {
-	struct ata_port *ap =
-		container_of(work, struct ata_port, port_task.work);
-	struct ata_queued_cmd *qc = ap->port_task_data;
-	u8 status;
-	int poll_next;
-
-fsm_start:
-	WARN_ON(ap->hsm_task_state == HSM_ST_IDLE);
-
-	/*
-	 * This is purely heuristic.  This is a fast path.
-	 * Sometimes when we enter, BSY will be cleared in
-	 * a chk-status or two.  If not, the drive is probably seeking
-	 * or something.  Snooze for a couple msecs, then
-	 * chk-status again.  If still busy, queue delayed work.
-	 */
-	status = ata_busy_wait(ap, ATA_BUSY, 5);
-	if (status & ATA_BUSY) {
-		msleep(2);
-		status = ata_busy_wait(ap, ATA_BUSY, 10);
-		if (status & ATA_BUSY) {
-			ata_pio_queue_task(ap, qc, ATA_SHORT_PAUSE);
-			return;
-		}
-	}
-
-	/* move the HSM */
-	poll_next = ata_hsm_move(ap, qc, status, 1);
+#ifdef __BIG_ENDIAN
+	unsigned int i;
 
-	/* another command or interrupt handler
-	 * may be running at this point.
-	 */
-	if (poll_next)
-		goto fsm_start;
+	for (i = 0; i < buf_words; i++)
+		buf[i] = le16_to_cpu(buf[i]);
+#endif /* __BIG_ENDIAN */
 }
 
 /**
@@ -6121,285 +4605,6 @@ err:
 	ata_qc_complete(qc);
 }
 
-/**
- *	ata_qc_issue_prot - issue taskfile to device in proto-dependent manner
- *	@qc: command to issue to device
- *
- *	Using various libata functions and hooks, this function
- *	starts an ATA command.  ATA commands are grouped into
- *	classes called "protocols", and issuing each type of protocol
- *	is slightly different.
- *
- *	May be used as the qc_issue() entry in ata_port_operations.
- *
- *	LOCKING:
- *	spin_lock_irqsave(host lock)
- *
- *	RETURNS:
- *	Zero on success, AC_ERR_* mask on failure
- */
-
-unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc)
-{
-	struct ata_port *ap = qc->ap;
-
-	/* Use polling pio if the LLD doesn't handle
-	 * interrupt driven pio and atapi CDB interrupt.
-	 */
-	if (ap->flags & ATA_FLAG_PIO_POLLING) {
-		switch (qc->tf.protocol) {
-		case ATA_PROT_PIO:
-		case ATA_PROT_NODATA:
-		case ATAPI_PROT_PIO:
-		case ATAPI_PROT_NODATA:
-			qc->tf.flags |= ATA_TFLAG_POLLING;
-			break;
-		case ATAPI_PROT_DMA:
-			if (qc->dev->flags & ATA_DFLAG_CDB_INTR)
-				/* see ata_dma_blacklisted() */
-				BUG();
-			break;
-		default:
-			break;
-		}
-	}
-
-	/* select the device */
-	ata_dev_select(ap, qc->dev->devno, 1, 0);
-
-	/* start the command */
-	switch (qc->tf.protocol) {
-	case ATA_PROT_NODATA:
-		if (qc->tf.flags & ATA_TFLAG_POLLING)
-			ata_qc_set_polling(qc);
-
-		ata_tf_to_host(ap, &qc->tf);
-		ap->hsm_task_state = HSM_ST_LAST;
-
-		if (qc->tf.flags & ATA_TFLAG_POLLING)
-			ata_pio_queue_task(ap, qc, 0);
-
-		break;
-
-	case ATA_PROT_DMA:
-		WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING);
-
-		ap->ops->tf_load(ap, &qc->tf);	 /* load tf registers */
-		ap->ops->bmdma_setup(qc);	    /* set up bmdma */
-		ap->ops->bmdma_start(qc);	    /* initiate bmdma */
-		ap->hsm_task_state = HSM_ST_LAST;
-		break;
-
-	case ATA_PROT_PIO:
-		if (qc->tf.flags & ATA_TFLAG_POLLING)
-			ata_qc_set_polling(qc);
-
-		ata_tf_to_host(ap, &qc->tf);
-
-		if (qc->tf.flags & ATA_TFLAG_WRITE) {
-			/* PIO data out protocol */
-			ap->hsm_task_state = HSM_ST_FIRST;
-			ata_pio_queue_task(ap, qc, 0);
-
-			/* always send first data block using
-			 * the ata_pio_task() codepath.
-			 */
-		} else {
-			/* PIO data in protocol */
-			ap->hsm_task_state = HSM_ST;
-
-			if (qc->tf.flags & ATA_TFLAG_POLLING)
-				ata_pio_queue_task(ap, qc, 0);
-
-			/* if polling, ata_pio_task() handles the rest.
-			 * otherwise, interrupt handler takes over from here.
-			 */
-		}
-
-		break;
-
-	case ATAPI_PROT_PIO:
-	case ATAPI_PROT_NODATA:
-		if (qc->tf.flags & ATA_TFLAG_POLLING)
-			ata_qc_set_polling(qc);
-
-		ata_tf_to_host(ap, &qc->tf);
-
-		ap->hsm_task_state = HSM_ST_FIRST;
-
-		/* send cdb by polling if no cdb interrupt */
-		if ((!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) ||
-		    (qc->tf.flags & ATA_TFLAG_POLLING))
-			ata_pio_queue_task(ap, qc, 0);
-		break;
-
-	case ATAPI_PROT_DMA:
-		WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING);
-
-		ap->ops->tf_load(ap, &qc->tf);	 /* load tf registers */
-		ap->ops->bmdma_setup(qc);	    /* set up bmdma */
-		ap->hsm_task_state = HSM_ST_FIRST;
-
-		/* send cdb by polling if no cdb interrupt */
-		if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
-			ata_pio_queue_task(ap, qc, 0);
-		break;
-
-	default:
-		WARN_ON(1);
-		return AC_ERR_SYSTEM;
-	}
-
-	return 0;
-}
-
-/**
- *	ata_host_intr - Handle host interrupt for given (port, task)
- *	@ap: Port on which interrupt arrived (possibly...)
- *	@qc: Taskfile currently active in engine
- *
- *	Handle host interrupt for given queued command.  Currently,
- *	only DMA interrupts are handled.  All other commands are
- *	handled via polling with interrupts disabled (nIEN bit).
- *
- *	LOCKING:
- *	spin_lock_irqsave(host lock)
- *
- *	RETURNS:
- *	One if interrupt was handled, zero if not (shared irq).
- */
-
-inline unsigned int ata_host_intr(struct ata_port *ap,
-				  struct ata_queued_cmd *qc)
-{
-	struct ata_eh_info *ehi = &ap->link.eh_info;
-	u8 status, host_stat = 0;
-
-	VPRINTK("ata%u: protocol %d task_state %d\n",
-		ap->print_id, qc->tf.protocol, ap->hsm_task_state);
-
-	/* Check whether we are expecting interrupt in this state */
-	switch (ap->hsm_task_state) {
-	case HSM_ST_FIRST:
-		/* Some pre-ATAPI-4 devices assert INTRQ
-		 * at this state when ready to receive CDB.
-		 */
-
-		/* Check the ATA_DFLAG_CDB_INTR flag is enough here.
-		 * The flag was turned on only for atapi devices.  No
-		 * need to check ata_is_atapi(qc->tf.protocol) again.
-		 */
-		if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
-			goto idle_irq;
-		break;
-	case HSM_ST_LAST:
-		if (qc->tf.protocol == ATA_PROT_DMA ||
-		    qc->tf.protocol == ATAPI_PROT_DMA) {
-			/* check status of DMA engine */
-			host_stat = ap->ops->bmdma_status(ap);
-			VPRINTK("ata%u: host_stat 0x%X\n",
-				ap->print_id, host_stat);
-
-			/* if it's not our irq... */
-			if (!(host_stat & ATA_DMA_INTR))
-				goto idle_irq;
-
-			/* before we do anything else, clear DMA-Start bit */
-			ap->ops->bmdma_stop(qc);
-
-			if (unlikely(host_stat & ATA_DMA_ERR)) {
-				/* error when transfering data to/from memory */
-				qc->err_mask |= AC_ERR_HOST_BUS;
-				ap->hsm_task_state = HSM_ST_ERR;
-			}
-		}
-		break;
-	case HSM_ST:
-		break;
-	default:
-		goto idle_irq;
-	}
-
-	/* check altstatus */
-	status = ata_altstatus(ap);
-	if (status & ATA_BUSY)
-		goto idle_irq;
-
-	/* check main status, clearing INTRQ */
-	status = ata_chk_status(ap);
-	if (unlikely(status & ATA_BUSY))
-		goto idle_irq;
-
-	/* ack bmdma irq events */
-	ap->ops->irq_clear(ap);
-
-	ata_hsm_move(ap, qc, status, 0);
-
-	if (unlikely(qc->err_mask) && (qc->tf.protocol == ATA_PROT_DMA ||
-				       qc->tf.protocol == ATAPI_PROT_DMA))
-		ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat);
-
-	return 1;	/* irq handled */
-
-idle_irq:
-	ap->stats.idle_irq++;
-
-#ifdef ATA_IRQ_TRAP
-	if ((ap->stats.idle_irq % 1000) == 0) {
-		ata_chk_status(ap);
-		ap->ops->irq_clear(ap);
-		ata_port_printk(ap, KERN_WARNING, "irq trap\n");
-		return 1;
-	}
-#endif
-	return 0;	/* irq not handled */
-}
-
-/**
- *	ata_interrupt - Default ATA host interrupt handler
- *	@irq: irq line (unused)
- *	@dev_instance: pointer to our ata_host information structure
- *
- *	Default interrupt handler for PCI IDE devices.  Calls
- *	ata_host_intr() for each port that is not disabled.
- *
- *	LOCKING:
- *	Obtains host lock during operation.
- *
- *	RETURNS:
- *	IRQ_NONE or IRQ_HANDLED.
- */
-
-irqreturn_t ata_interrupt(int irq, void *dev_instance)
-{
-	struct ata_host *host = dev_instance;
-	unsigned int i;
-	unsigned int handled = 0;
-	unsigned long flags;
-
-	/* TODO: make _irqsave conditional on x86 PCI IDE legacy mode */
-	spin_lock_irqsave(&host->lock, flags);
-
-	for (i = 0; i < host->n_ports; i++) {
-		struct ata_port *ap;
-
-		ap = host->ports[i];
-		if (ap &&
-		    !(ap->flags & ATA_FLAG_DISABLED)) {
-			struct ata_queued_cmd *qc;
-
-			qc = ata_qc_from_tag(ap, ap->link.active_tag);
-			if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)) &&
-			    (qc->flags & ATA_QCFLAG_ACTIVE))
-				handled |= ata_host_intr(ap, qc);
-		}
-	}
-
-	spin_unlock_irqrestore(&host->lock, flags);
-
-	return IRQ_RETVAL(handled);
-}
-
 /**
  *	sata_scr_valid - test whether SCRs are accessible
  *	@link: ATA link to test SCR accessibility for
@@ -7432,33 +5637,6 @@ void ata_host_detach(struct ata_host *host)
 	ata_acpi_dissociate(host);
 }
 
-/**
- *	ata_std_ports - initialize ioaddr with standard port offsets.
- *	@ioaddr: IO address structure to be initialized
- *
- *	Utility function which initializes data_addr, error_addr,
- *	feature_addr, nsect_addr, lbal_addr, lbam_addr, lbah_addr,
- *	device_addr, status_addr, and command_addr to standard offsets
- *	relative to cmd_addr.
- *
- *	Does not set ctl_addr, altstatus_addr, bmdma_addr, or scr_addr.
- */
-
-void ata_std_ports(struct ata_ioports *ioaddr)
-{
-	ioaddr->data_addr = ioaddr->cmd_addr + ATA_REG_DATA;
-	ioaddr->error_addr = ioaddr->cmd_addr + ATA_REG_ERR;
-	ioaddr->feature_addr = ioaddr->cmd_addr + ATA_REG_FEATURE;
-	ioaddr->nsect_addr = ioaddr->cmd_addr + ATA_REG_NSECT;
-	ioaddr->lbal_addr = ioaddr->cmd_addr + ATA_REG_LBAL;
-	ioaddr->lbam_addr = ioaddr->cmd_addr + ATA_REG_LBAM;
-	ioaddr->lbah_addr = ioaddr->cmd_addr + ATA_REG_LBAH;
-	ioaddr->device_addr = ioaddr->cmd_addr + ATA_REG_DEVICE;
-	ioaddr->status_addr = ioaddr->cmd_addr + ATA_REG_STATUS;
-	ioaddr->command_addr = ioaddr->cmd_addr + ATA_REG_CMD;
-}
-
-
 #ifdef CONFIG_PCI
 
 /**
@@ -7890,12 +6068,9 @@ EXPORT_SYMBOL_GPL(sata_deb_timing_long);
 EXPORT_SYMBOL_GPL(ata_base_port_ops);
 EXPORT_SYMBOL_GPL(sata_port_ops);
 EXPORT_SYMBOL_GPL(sata_pmp_port_ops);
-EXPORT_SYMBOL_GPL(ata_sff_port_ops);
-EXPORT_SYMBOL_GPL(ata_bmdma_port_ops);
 EXPORT_SYMBOL_GPL(ata_dummy_port_ops);
 EXPORT_SYMBOL_GPL(ata_dummy_port_info);
 EXPORT_SYMBOL_GPL(ata_std_bios_param);
-EXPORT_SYMBOL_GPL(ata_std_ports);
 EXPORT_SYMBOL_GPL(ata_host_init);
 EXPORT_SYMBOL_GPL(ata_host_alloc);
 EXPORT_SYMBOL_GPL(ata_host_alloc_pinfo);
@@ -7904,14 +6079,9 @@ EXPORT_SYMBOL_GPL(ata_host_register);
 EXPORT_SYMBOL_GPL(ata_host_activate);
 EXPORT_SYMBOL_GPL(ata_host_detach);
 EXPORT_SYMBOL_GPL(ata_sg_init);
-EXPORT_SYMBOL_GPL(ata_hsm_move);
 EXPORT_SYMBOL_GPL(ata_qc_complete);
 EXPORT_SYMBOL_GPL(ata_qc_complete_multiple);
-EXPORT_SYMBOL_GPL(ata_qc_issue_prot);
-EXPORT_SYMBOL_GPL(ata_tf_load);
-EXPORT_SYMBOL_GPL(ata_tf_read);
 EXPORT_SYMBOL_GPL(ata_noop_dev_select);
-EXPORT_SYMBOL_GPL(ata_std_dev_select);
 EXPORT_SYMBOL_GPL(sata_print_link_status);
 EXPORT_SYMBOL_GPL(atapi_cmd_type);
 EXPORT_SYMBOL_GPL(ata_tf_to_fis);
@@ -7923,54 +6093,27 @@ EXPORT_SYMBOL_GPL(ata_xfer_mode2mask);
 EXPORT_SYMBOL_GPL(ata_xfer_mode2shift);
 EXPORT_SYMBOL_GPL(ata_mode_string);
 EXPORT_SYMBOL_GPL(ata_id_xfermask);
-EXPORT_SYMBOL_GPL(ata_check_status);
-EXPORT_SYMBOL_GPL(ata_altstatus);
-EXPORT_SYMBOL_GPL(ata_exec_command);
 EXPORT_SYMBOL_GPL(ata_port_start);
-EXPORT_SYMBOL_GPL(ata_sff_port_start);
-EXPORT_SYMBOL_GPL(ata_interrupt);
 EXPORT_SYMBOL_GPL(ata_do_set_mode);
-EXPORT_SYMBOL_GPL(ata_data_xfer);
-EXPORT_SYMBOL_GPL(ata_data_xfer_noirq);
 EXPORT_SYMBOL_GPL(ata_std_qc_defer);
-EXPORT_SYMBOL_GPL(ata_qc_prep);
-EXPORT_SYMBOL_GPL(ata_dumb_qc_prep);
 EXPORT_SYMBOL_GPL(ata_noop_qc_prep);
-EXPORT_SYMBOL_GPL(ata_bmdma_setup);
-EXPORT_SYMBOL_GPL(ata_bmdma_start);
-EXPORT_SYMBOL_GPL(ata_bmdma_irq_clear);
 EXPORT_SYMBOL_GPL(ata_noop_irq_clear);
-EXPORT_SYMBOL_GPL(ata_bmdma_status);
-EXPORT_SYMBOL_GPL(ata_bmdma_stop);
-EXPORT_SYMBOL_GPL(ata_bmdma_freeze);
-EXPORT_SYMBOL_GPL(ata_bmdma_thaw);
-EXPORT_SYMBOL_GPL(ata_bmdma_error_handler);
-EXPORT_SYMBOL_GPL(ata_bmdma_post_internal_cmd);
 EXPORT_SYMBOL_GPL(ata_port_probe);
 EXPORT_SYMBOL_GPL(ata_dev_disable);
 EXPORT_SYMBOL_GPL(sata_set_spd);
 EXPORT_SYMBOL_GPL(sata_link_debounce);
 EXPORT_SYMBOL_GPL(sata_link_resume);
-EXPORT_SYMBOL_GPL(ata_bus_reset);
-EXPORT_SYMBOL_GPL(ata_std_prereset);
-EXPORT_SYMBOL_GPL(ata_std_softreset);
 EXPORT_SYMBOL_GPL(sata_link_hardreset);
-EXPORT_SYMBOL_GPL(sata_std_hardreset);
-EXPORT_SYMBOL_GPL(ata_std_postreset);
 EXPORT_SYMBOL_GPL(ata_dev_classify);
 EXPORT_SYMBOL_GPL(ata_dev_pair);
 EXPORT_SYMBOL_GPL(ata_port_disable);
 EXPORT_SYMBOL_GPL(ata_ratelimit);
 EXPORT_SYMBOL_GPL(ata_wait_register);
-EXPORT_SYMBOL_GPL(ata_busy_sleep);
-EXPORT_SYMBOL_GPL(ata_wait_after_reset);
-EXPORT_SYMBOL_GPL(ata_wait_ready);
 EXPORT_SYMBOL_GPL(ata_scsi_ioctl);
 EXPORT_SYMBOL_GPL(ata_scsi_queuecmd);
 EXPORT_SYMBOL_GPL(ata_scsi_slave_config);
 EXPORT_SYMBOL_GPL(ata_scsi_slave_destroy);
 EXPORT_SYMBOL_GPL(ata_scsi_change_queue_depth);
-EXPORT_SYMBOL_GPL(ata_host_intr);
 EXPORT_SYMBOL_GPL(sata_scr_valid);
 EXPORT_SYMBOL_GPL(sata_scr_read);
 EXPORT_SYMBOL_GPL(sata_scr_write);
@@ -7993,11 +6136,6 @@ EXPORT_SYMBOL_GPL(ata_timing_cycle2mode);
 
 #ifdef CONFIG_PCI
 EXPORT_SYMBOL_GPL(pci_test_config_bits);
-EXPORT_SYMBOL_GPL(ata_pci_init_sff_host);
-EXPORT_SYMBOL_GPL(ata_pci_init_bmdma);
-EXPORT_SYMBOL_GPL(ata_pci_prepare_sff_host);
-EXPORT_SYMBOL_GPL(ata_pci_activate_sff_host);
-EXPORT_SYMBOL_GPL(ata_pci_init_one);
 EXPORT_SYMBOL_GPL(ata_pci_remove_one);
 #ifdef CONFIG_PM
 EXPORT_SYMBOL_GPL(ata_pci_device_do_suspend);
@@ -8005,8 +6143,6 @@ EXPORT_SYMBOL_GPL(ata_pci_device_do_resume);
 EXPORT_SYMBOL_GPL(ata_pci_device_suspend);
 EXPORT_SYMBOL_GPL(ata_pci_device_resume);
 #endif /* CONFIG_PM */
-EXPORT_SYMBOL_GPL(ata_pci_default_filter);
-EXPORT_SYMBOL_GPL(ata_pci_clear_simplex);
 #endif /* CONFIG_PCI */
 
 EXPORT_SYMBOL_GPL(sata_pmp_qc_defer_cmd_switch);
@@ -8033,8 +6169,6 @@ EXPORT_SYMBOL_GPL(ata_eh_qc_complete);
 EXPORT_SYMBOL_GPL(ata_eh_qc_retry);
 EXPORT_SYMBOL_GPL(ata_do_eh);
 EXPORT_SYMBOL_GPL(ata_std_error_handler);
-EXPORT_SYMBOL_GPL(ata_irq_on);
-EXPORT_SYMBOL_GPL(ata_dev_try_classify);
 
 EXPORT_SYMBOL_GPL(ata_cable_40wire);
 EXPORT_SYMBOL_GPL(ata_cable_80wire);
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 40645ed125b1..840ae6da59bc 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -35,9 +35,185 @@
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/libata.h>
+#include <linux/highmem.h>
 
 #include "libata.h"
 
+const struct ata_port_operations ata_sff_port_ops = {
+	.inherits		= &ata_base_port_ops,
+
+	.qc_prep		= ata_qc_prep,
+	.qc_issue		= ata_qc_issue_prot,
+
+	.freeze			= ata_bmdma_freeze,
+	.thaw			= ata_bmdma_thaw,
+	.softreset		= ata_std_softreset,
+	.error_handler		= ata_bmdma_error_handler,
+	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+
+	.dev_select		= ata_std_dev_select,
+	.check_status		= ata_check_status,
+	.tf_load		= ata_tf_load,
+	.tf_read		= ata_tf_read,
+	.exec_command		= ata_exec_command,
+	.data_xfer		= ata_data_xfer,
+	.irq_on			= ata_irq_on,
+
+	.port_start		= ata_sff_port_start,
+};
+
+const struct ata_port_operations ata_bmdma_port_ops = {
+	.inherits		= &ata_sff_port_ops,
+
+	.mode_filter		= ata_pci_default_filter,
+
+	.bmdma_setup		= ata_bmdma_setup,
+	.bmdma_start		= ata_bmdma_start,
+	.bmdma_stop		= ata_bmdma_stop,
+	.bmdma_status		= ata_bmdma_status,
+	.irq_clear		= ata_bmdma_irq_clear,
+};
+
+/**
+ *	ata_fill_sg - Fill PCI IDE PRD table
+ *	@qc: Metadata associated with taskfile to be transferred
+ *
+ *	Fill PCI IDE PRD (scatter-gather) table with segments
+ *	associated with the current disk command.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ *
+ */
+static void ata_fill_sg(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	struct scatterlist *sg;
+	unsigned int si, pi;
+
+	pi = 0;
+	for_each_sg(qc->sg, sg, qc->n_elem, si) {
+		u32 addr, offset;
+		u32 sg_len, len;
+
+		/* determine if physical DMA addr spans 64K boundary.
+		 * Note h/w doesn't support 64-bit, so we unconditionally
+		 * truncate dma_addr_t to u32.
+		 */
+		addr = (u32) sg_dma_address(sg);
+		sg_len = sg_dma_len(sg);
+
+		while (sg_len) {
+			offset = addr & 0xffff;
+			len = sg_len;
+			if ((offset + sg_len) > 0x10000)
+				len = 0x10000 - offset;
+
+			ap->prd[pi].addr = cpu_to_le32(addr);
+			ap->prd[pi].flags_len = cpu_to_le32(len & 0xffff);
+			VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len);
+
+			pi++;
+			sg_len -= len;
+			addr += len;
+		}
+	}
+
+	ap->prd[pi - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
+}
+
+/**
+ *	ata_fill_sg_dumb - Fill PCI IDE PRD table
+ *	@qc: Metadata associated with taskfile to be transferred
+ *
+ *	Fill PCI IDE PRD (scatter-gather) table with segments
+ *	associated with the current disk command. Perform the fill
+ *	so that we avoid writing any length 64K records for
+ *	controllers that don't follow the spec.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ *
+ */
+static void ata_fill_sg_dumb(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	struct scatterlist *sg;
+	unsigned int si, pi;
+
+	pi = 0;
+	for_each_sg(qc->sg, sg, qc->n_elem, si) {
+		u32 addr, offset;
+		u32 sg_len, len, blen;
+
+		/* determine if physical DMA addr spans 64K boundary.
+		 * Note h/w doesn't support 64-bit, so we unconditionally
+		 * truncate dma_addr_t to u32.
+		 */
+		addr = (u32) sg_dma_address(sg);
+		sg_len = sg_dma_len(sg);
+
+		while (sg_len) {
+			offset = addr & 0xffff;
+			len = sg_len;
+			if ((offset + sg_len) > 0x10000)
+				len = 0x10000 - offset;
+
+			blen = len & 0xffff;
+			ap->prd[pi].addr = cpu_to_le32(addr);
+			if (blen == 0) {
+			   /* Some PATA chipsets like the CS5530 can't
+			      cope with 0x0000 meaning 64K as the spec says */
+				ap->prd[pi].flags_len = cpu_to_le32(0x8000);
+				blen = 0x8000;
+				ap->prd[++pi].addr = cpu_to_le32(addr + 0x8000);
+			}
+			ap->prd[pi].flags_len = cpu_to_le32(blen);
+			VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len);
+
+			pi++;
+			sg_len -= len;
+			addr += len;
+		}
+	}
+
+	ap->prd[pi - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
+}
+
+/**
+ *	ata_qc_prep - Prepare taskfile for submission
+ *	@qc: Metadata associated with taskfile to be prepared
+ *
+ *	Prepare ATA taskfile for submission.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ */
+void ata_qc_prep(struct ata_queued_cmd *qc)
+{
+	if (!(qc->flags & ATA_QCFLAG_DMAMAP))
+		return;
+
+	ata_fill_sg(qc);
+}
+
+/**
+ *	ata_dumb_qc_prep - Prepare taskfile for submission
+ *	@qc: Metadata associated with taskfile to be prepared
+ *
+ *	Prepare ATA taskfile for submission.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ */
+void ata_dumb_qc_prep(struct ata_queued_cmd *qc)
+{
+	if (!(qc->flags & ATA_QCFLAG_DMAMAP))
+		return;
+
+	ata_fill_sg_dumb(qc);
+}
+
 /**
  *	ata_check_status - Read device status reg & clear interrupt
  *	@ap: port where the device is
@@ -67,223 +243,1746 @@ u8 ata_check_status(struct ata_port *ap)
  *	LOCKING:
  *	Inherited from caller.
  */
-u8 ata_altstatus(struct ata_port *ap)
+u8 ata_altstatus(struct ata_port *ap)
+{
+	if (ap->ops->check_altstatus)
+		return ap->ops->check_altstatus(ap);
+
+	return ioread8(ap->ioaddr.altstatus_addr);
+}
+
+/**
+ *	ata_busy_sleep - sleep until BSY clears, or timeout
+ *	@ap: port containing status register to be polled
+ *	@tmout_pat: impatience timeout
+ *	@tmout: overall timeout
+ *
+ *	Sleep until ATA Status register bit BSY clears,
+ *	or a timeout occurs.
+ *
+ *	LOCKING:
+ *	Kernel thread context (may sleep).
+ *
+ *	RETURNS:
+ *	0 on success, -errno otherwise.
+ */
+int ata_busy_sleep(struct ata_port *ap,
+		   unsigned long tmout_pat, unsigned long tmout)
+{
+	unsigned long timer_start, timeout;
+	u8 status;
+
+	status = ata_busy_wait(ap, ATA_BUSY, 300);
+	timer_start = jiffies;
+	timeout = timer_start + tmout_pat;
+	while (status != 0xff && (status & ATA_BUSY) &&
+	       time_before(jiffies, timeout)) {
+		msleep(50);
+		status = ata_busy_wait(ap, ATA_BUSY, 3);
+	}
+
+	if (status != 0xff && (status & ATA_BUSY))
+		ata_port_printk(ap, KERN_WARNING,
+				"port is slow to respond, please be patient "
+				"(Status 0x%x)\n", status);
+
+	timeout = timer_start + tmout;
+	while (status != 0xff && (status & ATA_BUSY) &&
+	       time_before(jiffies, timeout)) {
+		msleep(50);
+		status = ata_chk_status(ap);
+	}
+
+	if (status == 0xff)
+		return -ENODEV;
+
+	if (status & ATA_BUSY) {
+		ata_port_printk(ap, KERN_ERR, "port failed to respond "
+				"(%lu secs, Status 0x%x)\n",
+				tmout / HZ, status);
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+/**
+ *	ata_wait_ready - sleep until BSY clears, or timeout
+ *	@ap: port containing status register to be polled
+ *	@deadline: deadline jiffies for the operation
+ *
+ *	Sleep until ATA Status register bit BSY clears, or timeout
+ *	occurs.
+ *
+ *	LOCKING:
+ *	Kernel thread context (may sleep).
+ *
+ *	RETURNS:
+ *	0 on success, -errno otherwise.
+ */
+int ata_wait_ready(struct ata_port *ap, unsigned long deadline)
+{
+	unsigned long start = jiffies;
+	int warned = 0;
+
+	while (1) {
+		u8 status = ata_chk_status(ap);
+		unsigned long now = jiffies;
+
+		if (!(status & ATA_BUSY))
+			return 0;
+		if (!ata_link_online(&ap->link) && status == 0xff)
+			return -ENODEV;
+		if (time_after(now, deadline))
+			return -EBUSY;
+
+		if (!warned && time_after(now, start + 5 * HZ) &&
+		    (deadline - now > 3 * HZ)) {
+			ata_port_printk(ap, KERN_WARNING,
+				"port is slow to respond, please be patient "
+				"(Status 0x%x)\n", status);
+			warned = 1;
+		}
+
+		msleep(50);
+	}
+}
+
+/**
+ *	ata_std_dev_select - Select device 0/1 on ATA bus
+ *	@ap: ATA channel to manipulate
+ *	@device: ATA device (numbered from zero) to select
+ *
+ *	Use the method defined in the ATA specification to
+ *	make either device 0, or device 1, active on the
+ *	ATA channel.  Works with both PIO and MMIO.
+ *
+ *	May be used as the dev_select() entry in ata_port_operations.
+ *
+ *	LOCKING:
+ *	caller.
+ */
+void ata_std_dev_select(struct ata_port *ap, unsigned int device)
+{
+	u8 tmp;
+
+	if (device == 0)
+		tmp = ATA_DEVICE_OBS;
+	else
+		tmp = ATA_DEVICE_OBS | ATA_DEV1;
+
+	iowrite8(tmp, ap->ioaddr.device_addr);
+	ata_pause(ap);		/* needed; also flushes, for mmio */
+}
+
+/**
+ *	ata_dev_select - Select device 0/1 on ATA bus
+ *	@ap: ATA channel to manipulate
+ *	@device: ATA device (numbered from zero) to select
+ *	@wait: non-zero to wait for Status register BSY bit to clear
+ *	@can_sleep: non-zero if context allows sleeping
+ *
+ *	Use the method defined in the ATA specification to
+ *	make either device 0, or device 1, active on the
+ *	ATA channel.
+ *
+ *	This is a high-level version of ata_std_dev_select(),
+ *	which additionally provides the services of inserting
+ *	the proper pauses and status polling, where needed.
+ *
+ *	LOCKING:
+ *	caller.
+ */
+void ata_dev_select(struct ata_port *ap, unsigned int device,
+			   unsigned int wait, unsigned int can_sleep)
+{
+	if (ata_msg_probe(ap))
+		ata_port_printk(ap, KERN_INFO, "ata_dev_select: ENTER, "
+				"device %u, wait %u\n", device, wait);
+
+	if (wait)
+		ata_wait_idle(ap);
+
+	ap->ops->dev_select(ap, device);
+
+	if (wait) {
+		if (can_sleep && ap->link.device[device].class == ATA_DEV_ATAPI)
+			msleep(150);
+		ata_wait_idle(ap);
+	}
+}
+
+/**
+ *	ata_irq_on - Enable interrupts on a port.
+ *	@ap: Port on which interrupts are enabled.
+ *
+ *	Enable interrupts on a legacy IDE device using MMIO or PIO,
+ *	wait for idle, clear any pending interrupts.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+u8 ata_irq_on(struct ata_port *ap)
+{
+	struct ata_ioports *ioaddr = &ap->ioaddr;
+	u8 tmp;
+
+	ap->ctl &= ~ATA_NIEN;
+	ap->last_ctl = ap->ctl;
+
+	if (ioaddr->ctl_addr)
+		iowrite8(ap->ctl, ioaddr->ctl_addr);
+	tmp = ata_wait_idle(ap);
+
+	ap->ops->irq_clear(ap);
+
+	return tmp;
+}
+
+/**
+ *	ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt.
+ *	@ap: Port associated with this ATA transaction.
+ *
+ *	Clear interrupt and error flags in DMA status register.
+ *
+ *	May be used as the irq_clear() entry in ata_port_operations.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ */
+void ata_bmdma_irq_clear(struct ata_port *ap)
+{
+	void __iomem *mmio = ap->ioaddr.bmdma_addr;
+
+	if (!mmio)
+		return;
+
+	iowrite8(ioread8(mmio + ATA_DMA_STATUS), mmio + ATA_DMA_STATUS);
+}
+
+/**
+ *	ata_tf_load - send taskfile registers to host controller
+ *	@ap: Port to which output is sent
+ *	@tf: ATA taskfile register set
+ *
+ *	Outputs ATA taskfile to standard ATA host controller.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
+{
+	struct ata_ioports *ioaddr = &ap->ioaddr;
+	unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
+
+	if (tf->ctl != ap->last_ctl) {
+		if (ioaddr->ctl_addr)
+			iowrite8(tf->ctl, ioaddr->ctl_addr);
+		ap->last_ctl = tf->ctl;
+		ata_wait_idle(ap);
+	}
+
+	if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
+		WARN_ON(!ioaddr->ctl_addr);
+		iowrite8(tf->hob_feature, ioaddr->feature_addr);
+		iowrite8(tf->hob_nsect, ioaddr->nsect_addr);
+		iowrite8(tf->hob_lbal, ioaddr->lbal_addr);
+		iowrite8(tf->hob_lbam, ioaddr->lbam_addr);
+		iowrite8(tf->hob_lbah, ioaddr->lbah_addr);
+		VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
+			tf->hob_feature,
+			tf->hob_nsect,
+			tf->hob_lbal,
+			tf->hob_lbam,
+			tf->hob_lbah);
+	}
+
+	if (is_addr) {
+		iowrite8(tf->feature, ioaddr->feature_addr);
+		iowrite8(tf->nsect, ioaddr->nsect_addr);
+		iowrite8(tf->lbal, ioaddr->lbal_addr);
+		iowrite8(tf->lbam, ioaddr->lbam_addr);
+		iowrite8(tf->lbah, ioaddr->lbah_addr);
+		VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
+			tf->feature,
+			tf->nsect,
+			tf->lbal,
+			tf->lbam,
+			tf->lbah);
+	}
+
+	if (tf->flags & ATA_TFLAG_DEVICE) {
+		iowrite8(tf->device, ioaddr->device_addr);
+		VPRINTK("device 0x%X\n", tf->device);
+	}
+
+	ata_wait_idle(ap);
+}
+
+/**
+ *	ata_tf_read - input device's ATA taskfile shadow registers
+ *	@ap: Port from which input is read
+ *	@tf: ATA taskfile register set for storing input
+ *
+ *	Reads ATA taskfile registers for currently-selected device
+ *	into @tf. Assumes the device has a fully SFF compliant task file
+ *	layout and behaviour. If you device does not (eg has a different
+ *	status method) then you will need to provide a replacement tf_read
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
+{
+	struct ata_ioports *ioaddr = &ap->ioaddr;
+
+	tf->command = ata_check_status(ap);
+	tf->feature = ioread8(ioaddr->error_addr);
+	tf->nsect = ioread8(ioaddr->nsect_addr);
+	tf->lbal = ioread8(ioaddr->lbal_addr);
+	tf->lbam = ioread8(ioaddr->lbam_addr);
+	tf->lbah = ioread8(ioaddr->lbah_addr);
+	tf->device = ioread8(ioaddr->device_addr);
+
+	if (tf->flags & ATA_TFLAG_LBA48) {
+		if (likely(ioaddr->ctl_addr)) {
+			iowrite8(tf->ctl | ATA_HOB, ioaddr->ctl_addr);
+			tf->hob_feature = ioread8(ioaddr->error_addr);
+			tf->hob_nsect = ioread8(ioaddr->nsect_addr);
+			tf->hob_lbal = ioread8(ioaddr->lbal_addr);
+			tf->hob_lbam = ioread8(ioaddr->lbam_addr);
+			tf->hob_lbah = ioread8(ioaddr->lbah_addr);
+			iowrite8(tf->ctl, ioaddr->ctl_addr);
+			ap->last_ctl = tf->ctl;
+		} else
+			WARN_ON(1);
+	}
+}
+
+/**
+ *	ata_exec_command - issue ATA command to host controller
+ *	@ap: port to which command is being issued
+ *	@tf: ATA taskfile register set
+ *
+ *	Issues ATA command, with proper synchronization with interrupt
+ *	handler / other threads.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ */
+void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf)
+{
+	DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command);
+
+	iowrite8(tf->command, ap->ioaddr.command_addr);
+	ata_pause(ap);
+}
+
+/**
+ *	ata_tf_to_host - issue ATA taskfile to host controller
+ *	@ap: port to which command is being issued
+ *	@tf: ATA taskfile register set
+ *
+ *	Issues ATA taskfile register set to ATA host controller,
+ *	with proper synchronization with interrupt handler and
+ *	other threads.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ */
+static inline void ata_tf_to_host(struct ata_port *ap,
+				  const struct ata_taskfile *tf)
+{
+	ap->ops->tf_load(ap, tf);
+	ap->ops->exec_command(ap, tf);
+}
+
+/**
+ *	ata_data_xfer - Transfer data by PIO
+ *	@dev: device to target
+ *	@buf: data buffer
+ *	@buflen: buffer length
+ *	@rw: read/write
+ *
+ *	Transfer data from/to the device data register by PIO.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ *
+ *	RETURNS:
+ *	Bytes consumed.
+ */
+unsigned int ata_data_xfer(struct ata_device *dev, unsigned char *buf,
+			   unsigned int buflen, int rw)
+{
+	struct ata_port *ap = dev->link->ap;
+	void __iomem *data_addr = ap->ioaddr.data_addr;
+	unsigned int words = buflen >> 1;
+
+	/* Transfer multiple of 2 bytes */
+	if (rw == READ)
+		ioread16_rep(data_addr, buf, words);
+	else
+		iowrite16_rep(data_addr, buf, words);
+
+	/* Transfer trailing 1 byte, if any. */
+	if (unlikely(buflen & 0x01)) {
+		__le16 align_buf[1] = { 0 };
+		unsigned char *trailing_buf = buf + buflen - 1;
+
+		if (rw == READ) {
+			align_buf[0] = cpu_to_le16(ioread16(data_addr));
+			memcpy(trailing_buf, align_buf, 1);
+		} else {
+			memcpy(align_buf, trailing_buf, 1);
+			iowrite16(le16_to_cpu(align_buf[0]), data_addr);
+		}
+		words++;
+	}
+
+	return words << 1;
+}
+
+/**
+ *	ata_data_xfer_noirq - Transfer data by PIO
+ *	@dev: device to target
+ *	@buf: data buffer
+ *	@buflen: buffer length
+ *	@rw: read/write
+ *
+ *	Transfer data from/to the device data register by PIO. Do the
+ *	transfer with interrupts disabled.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ *
+ *	RETURNS:
+ *	Bytes consumed.
+ */
+unsigned int ata_data_xfer_noirq(struct ata_device *dev, unsigned char *buf,
+				 unsigned int buflen, int rw)
+{
+	unsigned long flags;
+	unsigned int consumed;
+
+	local_irq_save(flags);
+	consumed = ata_data_xfer(dev, buf, buflen, rw);
+	local_irq_restore(flags);
+
+	return consumed;
+}
+
+/**
+ *	ata_pio_sector - Transfer a sector of data.
+ *	@qc: Command on going
+ *
+ *	Transfer qc->sect_size bytes of data from/to the ATA device.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+static void ata_pio_sector(struct ata_queued_cmd *qc)
+{
+	int do_write = (qc->tf.flags & ATA_TFLAG_WRITE);
+	struct ata_port *ap = qc->ap;
+	struct page *page;
+	unsigned int offset;
+	unsigned char *buf;
+
+	if (qc->curbytes == qc->nbytes - qc->sect_size)
+		ap->hsm_task_state = HSM_ST_LAST;
+
+	page = sg_page(qc->cursg);
+	offset = qc->cursg->offset + qc->cursg_ofs;
+
+	/* get the current page and offset */
+	page = nth_page(page, (offset >> PAGE_SHIFT));
+	offset %= PAGE_SIZE;
+
+	DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read");
+
+	if (PageHighMem(page)) {
+		unsigned long flags;
+
+		/* FIXME: use a bounce buffer */
+		local_irq_save(flags);
+		buf = kmap_atomic(page, KM_IRQ0);
+
+		/* do the actual data transfer */
+		ap->ops->data_xfer(qc->dev, buf + offset, qc->sect_size, do_write);
+
+		kunmap_atomic(buf, KM_IRQ0);
+		local_irq_restore(flags);
+	} else {
+		buf = page_address(page);
+		ap->ops->data_xfer(qc->dev, buf + offset, qc->sect_size, do_write);
+	}
+
+	qc->curbytes += qc->sect_size;
+	qc->cursg_ofs += qc->sect_size;
+
+	if (qc->cursg_ofs == qc->cursg->length) {
+		qc->cursg = sg_next(qc->cursg);
+		qc->cursg_ofs = 0;
+	}
+}
+
+/**
+ *	ata_pio_sectors - Transfer one or many sectors.
+ *	@qc: Command on going
+ *
+ *	Transfer one or many sectors of data from/to the
+ *	ATA device for the DRQ request.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+static void ata_pio_sectors(struct ata_queued_cmd *qc)
+{
+	if (is_multi_taskfile(&qc->tf)) {
+		/* READ/WRITE MULTIPLE */
+		unsigned int nsect;
+
+		WARN_ON(qc->dev->multi_count == 0);
+
+		nsect = min((qc->nbytes - qc->curbytes) / qc->sect_size,
+			    qc->dev->multi_count);
+		while (nsect--)
+			ata_pio_sector(qc);
+	} else
+		ata_pio_sector(qc);
+
+	ata_altstatus(qc->ap); /* flush */
+}
+
+/**
+ *	atapi_send_cdb - Write CDB bytes to hardware
+ *	@ap: Port to which ATAPI device is attached.
+ *	@qc: Taskfile currently active
+ *
+ *	When device has indicated its readiness to accept
+ *	a CDB, this function is called.  Send the CDB.
+ *
+ *	LOCKING:
+ *	caller.
+ */
+static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc)
+{
+	/* send SCSI cdb */
+	DPRINTK("send cdb\n");
+	WARN_ON(qc->dev->cdb_len < 12);
+
+	ap->ops->data_xfer(qc->dev, qc->cdb, qc->dev->cdb_len, 1);
+	ata_altstatus(ap); /* flush */
+
+	switch (qc->tf.protocol) {
+	case ATAPI_PROT_PIO:
+		ap->hsm_task_state = HSM_ST;
+		break;
+	case ATAPI_PROT_NODATA:
+		ap->hsm_task_state = HSM_ST_LAST;
+		break;
+	case ATAPI_PROT_DMA:
+		ap->hsm_task_state = HSM_ST_LAST;
+		/* initiate bmdma */
+		ap->ops->bmdma_start(qc);
+		break;
+	}
+}
+
+/**
+ *	__atapi_pio_bytes - Transfer data from/to the ATAPI device.
+ *	@qc: Command on going
+ *	@bytes: number of bytes
+ *
+ *	Transfer Transfer data from/to the ATAPI device.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ *
+ */
+static int __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes)
+{
+	int rw = (qc->tf.flags & ATA_TFLAG_WRITE) ? WRITE : READ;
+	struct ata_port *ap = qc->ap;
+	struct ata_device *dev = qc->dev;
+	struct ata_eh_info *ehi = &dev->link->eh_info;
+	struct scatterlist *sg;
+	struct page *page;
+	unsigned char *buf;
+	unsigned int offset, count, consumed;
+
+next_sg:
+	sg = qc->cursg;
+	if (unlikely(!sg)) {
+		ata_ehi_push_desc(ehi, "unexpected or too much trailing data "
+				  "buf=%u cur=%u bytes=%u",
+				  qc->nbytes, qc->curbytes, bytes);
+		return -1;
+	}
+
+	page = sg_page(sg);
+	offset = sg->offset + qc->cursg_ofs;
+
+	/* get the current page and offset */
+	page = nth_page(page, (offset >> PAGE_SHIFT));
+	offset %= PAGE_SIZE;
+
+	/* don't overrun current sg */
+	count = min(sg->length - qc->cursg_ofs, bytes);
+
+	/* don't cross page boundaries */
+	count = min(count, (unsigned int)PAGE_SIZE - offset);
+
+	DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read");
+
+	if (PageHighMem(page)) {
+		unsigned long flags;
+
+		/* FIXME: use bounce buffer */
+		local_irq_save(flags);
+		buf = kmap_atomic(page, KM_IRQ0);
+
+		/* do the actual data transfer */
+		consumed = ap->ops->data_xfer(dev,  buf + offset, count, rw);
+
+		kunmap_atomic(buf, KM_IRQ0);
+		local_irq_restore(flags);
+	} else {
+		buf = page_address(page);
+		consumed = ap->ops->data_xfer(dev,  buf + offset, count, rw);
+	}
+
+	bytes -= min(bytes, consumed);
+	qc->curbytes += count;
+	qc->cursg_ofs += count;
+
+	if (qc->cursg_ofs == sg->length) {
+		qc->cursg = sg_next(qc->cursg);
+		qc->cursg_ofs = 0;
+	}
+
+	/* consumed can be larger than count only for the last transfer */
+	WARN_ON(qc->cursg && count != consumed);
+
+	if (bytes)
+		goto next_sg;
+	return 0;
+}
+
+/**
+ *	atapi_pio_bytes - Transfer data from/to the ATAPI device.
+ *	@qc: Command on going
+ *
+ *	Transfer Transfer data from/to the ATAPI device.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+static void atapi_pio_bytes(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	struct ata_device *dev = qc->dev;
+	struct ata_eh_info *ehi = &dev->link->eh_info;
+	unsigned int ireason, bc_lo, bc_hi, bytes;
+	int i_write, do_write = (qc->tf.flags & ATA_TFLAG_WRITE) ? 1 : 0;
+
+	/* Abuse qc->result_tf for temp storage of intermediate TF
+	 * here to save some kernel stack usage.
+	 * For normal completion, qc->result_tf is not relevant. For
+	 * error, qc->result_tf is later overwritten by ata_qc_complete().
+	 * So, the correctness of qc->result_tf is not affected.
+	 */
+	ap->ops->tf_read(ap, &qc->result_tf);
+	ireason = qc->result_tf.nsect;
+	bc_lo = qc->result_tf.lbam;
+	bc_hi = qc->result_tf.lbah;
+	bytes = (bc_hi << 8) | bc_lo;
+
+	/* shall be cleared to zero, indicating xfer of data */
+	if (unlikely(ireason & (1 << 0)))
+		goto atapi_check;
+
+	/* make sure transfer direction matches expected */
+	i_write = ((ireason & (1 << 1)) == 0) ? 1 : 0;
+	if (unlikely(do_write != i_write))
+		goto atapi_check;
+
+	if (unlikely(!bytes))
+		goto atapi_check;
+
+	VPRINTK("ata%u: xfering %d bytes\n", ap->print_id, bytes);
+
+	if (unlikely(__atapi_pio_bytes(qc, bytes)))
+		goto err_out;
+	ata_altstatus(ap); /* flush */
+
+	return;
+
+ atapi_check:
+	ata_ehi_push_desc(ehi, "ATAPI check failed (ireason=0x%x bytes=%u)",
+			  ireason, bytes);
+ err_out:
+	qc->err_mask |= AC_ERR_HSM;
+	ap->hsm_task_state = HSM_ST_ERR;
+}
+
+/**
+ *	ata_hsm_ok_in_wq - Check if the qc can be handled in the workqueue.
+ *	@ap: the target ata_port
+ *	@qc: qc on going
+ *
+ *	RETURNS:
+ *	1 if ok in workqueue, 0 otherwise.
+ */
+static inline int ata_hsm_ok_in_wq(struct ata_port *ap, struct ata_queued_cmd *qc)
+{
+	if (qc->tf.flags & ATA_TFLAG_POLLING)
+		return 1;
+
+	if (ap->hsm_task_state == HSM_ST_FIRST) {
+		if (qc->tf.protocol == ATA_PROT_PIO &&
+		    (qc->tf.flags & ATA_TFLAG_WRITE))
+		    return 1;
+
+		if (ata_is_atapi(qc->tf.protocol) &&
+		    !(qc->dev->flags & ATA_DFLAG_CDB_INTR))
+			return 1;
+	}
+
+	return 0;
+}
+
+/**
+ *	ata_hsm_qc_complete - finish a qc running on standard HSM
+ *	@qc: Command to complete
+ *	@in_wq: 1 if called from workqueue, 0 otherwise
+ *
+ *	Finish @qc which is running on standard HSM.
+ *
+ *	LOCKING:
+ *	If @in_wq is zero, spin_lock_irqsave(host lock).
+ *	Otherwise, none on entry and grabs host lock.
+ */
+static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq)
+{
+	struct ata_port *ap = qc->ap;
+	unsigned long flags;
+
+	if (ap->ops->error_handler) {
+		if (in_wq) {
+			spin_lock_irqsave(ap->lock, flags);
+
+			/* EH might have kicked in while host lock is
+			 * released.
+			 */
+			qc = ata_qc_from_tag(ap, qc->tag);
+			if (qc) {
+				if (likely(!(qc->err_mask & AC_ERR_HSM))) {
+					ap->ops->irq_on(ap);
+					ata_qc_complete(qc);
+				} else
+					ata_port_freeze(ap);
+			}
+
+			spin_unlock_irqrestore(ap->lock, flags);
+		} else {
+			if (likely(!(qc->err_mask & AC_ERR_HSM)))
+				ata_qc_complete(qc);
+			else
+				ata_port_freeze(ap);
+		}
+	} else {
+		if (in_wq) {
+			spin_lock_irqsave(ap->lock, flags);
+			ap->ops->irq_on(ap);
+			ata_qc_complete(qc);
+			spin_unlock_irqrestore(ap->lock, flags);
+		} else
+			ata_qc_complete(qc);
+	}
+}
+
+/**
+ *	ata_hsm_move - move the HSM to the next state.
+ *	@ap: the target ata_port
+ *	@qc: qc on going
+ *	@status: current device status
+ *	@in_wq: 1 if called from workqueue, 0 otherwise
+ *
+ *	RETURNS:
+ *	1 when poll next status needed, 0 otherwise.
+ */
+int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc,
+		 u8 status, int in_wq)
+{
+	unsigned long flags = 0;
+	int poll_next;
+
+	WARN_ON((qc->flags & ATA_QCFLAG_ACTIVE) == 0);
+
+	/* Make sure ata_qc_issue_prot() does not throw things
+	 * like DMA polling into the workqueue. Notice that
+	 * in_wq is not equivalent to (qc->tf.flags & ATA_TFLAG_POLLING).
+	 */
+	WARN_ON(in_wq != ata_hsm_ok_in_wq(ap, qc));
+
+fsm_start:
+	DPRINTK("ata%u: protocol %d task_state %d (dev_stat 0x%X)\n",
+		ap->print_id, qc->tf.protocol, ap->hsm_task_state, status);
+
+	switch (ap->hsm_task_state) {
+	case HSM_ST_FIRST:
+		/* Send first data block or PACKET CDB */
+
+		/* If polling, we will stay in the work queue after
+		 * sending the data. Otherwise, interrupt handler
+		 * takes over after sending the data.
+		 */
+		poll_next = (qc->tf.flags & ATA_TFLAG_POLLING);
+
+		/* check device status */
+		if (unlikely((status & ATA_DRQ) == 0)) {
+			/* handle BSY=0, DRQ=0 as error */
+			if (likely(status & (ATA_ERR | ATA_DF)))
+				/* device stops HSM for abort/error */
+				qc->err_mask |= AC_ERR_DEV;
+			else
+				/* HSM violation. Let EH handle this */
+				qc->err_mask |= AC_ERR_HSM;
+
+			ap->hsm_task_state = HSM_ST_ERR;
+			goto fsm_start;
+		}
+
+		/* Device should not ask for data transfer (DRQ=1)
+		 * when it finds something wrong.
+		 * We ignore DRQ here and stop the HSM by
+		 * changing hsm_task_state to HSM_ST_ERR and
+		 * let the EH abort the command or reset the device.
+		 */
+		if (unlikely(status & (ATA_ERR | ATA_DF))) {
+			/* Some ATAPI tape drives forget to clear the ERR bit
+			 * when doing the next command (mostly request sense).
+			 * We ignore ERR here to workaround and proceed sending
+			 * the CDB.
+			 */
+			if (!(qc->dev->horkage & ATA_HORKAGE_STUCK_ERR)) {
+				ata_port_printk(ap, KERN_WARNING,
+						"DRQ=1 with device error, "
+						"dev_stat 0x%X\n", status);
+				qc->err_mask |= AC_ERR_HSM;
+				ap->hsm_task_state = HSM_ST_ERR;
+				goto fsm_start;
+			}
+		}
+
+		/* Send the CDB (atapi) or the first data block (ata pio out).
+		 * During the state transition, interrupt handler shouldn't
+		 * be invoked before the data transfer is complete and
+		 * hsm_task_state is changed. Hence, the following locking.
+		 */
+		if (in_wq)
+			spin_lock_irqsave(ap->lock, flags);
+
+		if (qc->tf.protocol == ATA_PROT_PIO) {
+			/* PIO data out protocol.
+			 * send first data block.
+			 */
+
+			/* ata_pio_sectors() might change the state
+			 * to HSM_ST_LAST. so, the state is changed here
+			 * before ata_pio_sectors().
+			 */
+			ap->hsm_task_state = HSM_ST;
+			ata_pio_sectors(qc);
+		} else
+			/* send CDB */
+			atapi_send_cdb(ap, qc);
+
+		if (in_wq)
+			spin_unlock_irqrestore(ap->lock, flags);
+
+		/* if polling, ata_pio_task() handles the rest.
+		 * otherwise, interrupt handler takes over from here.
+		 */
+		break;
+
+	case HSM_ST:
+		/* complete command or read/write the data register */
+		if (qc->tf.protocol == ATAPI_PROT_PIO) {
+			/* ATAPI PIO protocol */
+			if ((status & ATA_DRQ) == 0) {
+				/* No more data to transfer or device error.
+				 * Device error will be tagged in HSM_ST_LAST.
+				 */
+				ap->hsm_task_state = HSM_ST_LAST;
+				goto fsm_start;
+			}
+
+			/* Device should not ask for data transfer (DRQ=1)
+			 * when it finds something wrong.
+			 * We ignore DRQ here and stop the HSM by
+			 * changing hsm_task_state to HSM_ST_ERR and
+			 * let the EH abort the command or reset the device.
+			 */
+			if (unlikely(status & (ATA_ERR | ATA_DF))) {
+				ata_port_printk(ap, KERN_WARNING, "DRQ=1 with "
+						"device error, dev_stat 0x%X\n",
+						status);
+				qc->err_mask |= AC_ERR_HSM;
+				ap->hsm_task_state = HSM_ST_ERR;
+				goto fsm_start;
+			}
+
+			atapi_pio_bytes(qc);
+
+			if (unlikely(ap->hsm_task_state == HSM_ST_ERR))
+				/* bad ireason reported by device */
+				goto fsm_start;
+
+		} else {
+			/* ATA PIO protocol */
+			if (unlikely((status & ATA_DRQ) == 0)) {
+				/* handle BSY=0, DRQ=0 as error */
+				if (likely(status & (ATA_ERR | ATA_DF)))
+					/* device stops HSM for abort/error */
+					qc->err_mask |= AC_ERR_DEV;
+				else
+					/* HSM violation. Let EH handle this.
+					 * Phantom devices also trigger this
+					 * condition.  Mark hint.
+					 */
+					qc->err_mask |= AC_ERR_HSM |
+							AC_ERR_NODEV_HINT;
+
+				ap->hsm_task_state = HSM_ST_ERR;
+				goto fsm_start;
+			}
+
+			/* For PIO reads, some devices may ask for
+			 * data transfer (DRQ=1) alone with ERR=1.
+			 * We respect DRQ here and transfer one
+			 * block of junk data before changing the
+			 * hsm_task_state to HSM_ST_ERR.
+			 *
+			 * For PIO writes, ERR=1 DRQ=1 doesn't make
+			 * sense since the data block has been
+			 * transferred to the device.
+			 */
+			if (unlikely(status & (ATA_ERR | ATA_DF))) {
+				/* data might be corrputed */
+				qc->err_mask |= AC_ERR_DEV;
+
+				if (!(qc->tf.flags & ATA_TFLAG_WRITE)) {
+					ata_pio_sectors(qc);
+					status = ata_wait_idle(ap);
+				}
+
+				if (status & (ATA_BUSY | ATA_DRQ))
+					qc->err_mask |= AC_ERR_HSM;
+
+				/* ata_pio_sectors() might change the
+				 * state to HSM_ST_LAST. so, the state
+				 * is changed after ata_pio_sectors().
+				 */
+				ap->hsm_task_state = HSM_ST_ERR;
+				goto fsm_start;
+			}
+
+			ata_pio_sectors(qc);
+
+			if (ap->hsm_task_state == HSM_ST_LAST &&
+			    (!(qc->tf.flags & ATA_TFLAG_WRITE))) {
+				/* all data read */
+				status = ata_wait_idle(ap);
+				goto fsm_start;
+			}
+		}
+
+		poll_next = 1;
+		break;
+
+	case HSM_ST_LAST:
+		if (unlikely(!ata_ok(status))) {
+			qc->err_mask |= __ac_err_mask(status);
+			ap->hsm_task_state = HSM_ST_ERR;
+			goto fsm_start;
+		}
+
+		/* no more data to transfer */
+		DPRINTK("ata%u: dev %u command complete, drv_stat 0x%x\n",
+			ap->print_id, qc->dev->devno, status);
+
+		WARN_ON(qc->err_mask);
+
+		ap->hsm_task_state = HSM_ST_IDLE;
+
+		/* complete taskfile transaction */
+		ata_hsm_qc_complete(qc, in_wq);
+
+		poll_next = 0;
+		break;
+
+	case HSM_ST_ERR:
+		/* make sure qc->err_mask is available to
+		 * know what's wrong and recover
+		 */
+		WARN_ON(qc->err_mask == 0);
+
+		ap->hsm_task_state = HSM_ST_IDLE;
+
+		/* complete taskfile transaction */
+		ata_hsm_qc_complete(qc, in_wq);
+
+		poll_next = 0;
+		break;
+	default:
+		poll_next = 0;
+		BUG();
+	}
+
+	return poll_next;
+}
+
+void ata_pio_task(struct work_struct *work)
+{
+	struct ata_port *ap =
+		container_of(work, struct ata_port, port_task.work);
+	struct ata_queued_cmd *qc = ap->port_task_data;
+	u8 status;
+	int poll_next;
+
+fsm_start:
+	WARN_ON(ap->hsm_task_state == HSM_ST_IDLE);
+
+	/*
+	 * This is purely heuristic.  This is a fast path.
+	 * Sometimes when we enter, BSY will be cleared in
+	 * a chk-status or two.  If not, the drive is probably seeking
+	 * or something.  Snooze for a couple msecs, then
+	 * chk-status again.  If still busy, queue delayed work.
+	 */
+	status = ata_busy_wait(ap, ATA_BUSY, 5);
+	if (status & ATA_BUSY) {
+		msleep(2);
+		status = ata_busy_wait(ap, ATA_BUSY, 10);
+		if (status & ATA_BUSY) {
+			ata_pio_queue_task(ap, qc, ATA_SHORT_PAUSE);
+			return;
+		}
+	}
+
+	/* move the HSM */
+	poll_next = ata_hsm_move(ap, qc, status, 1);
+
+	/* another command or interrupt handler
+	 * may be running at this point.
+	 */
+	if (poll_next)
+		goto fsm_start;
+}
+
+/**
+ *	ata_qc_issue_prot - issue taskfile to device in proto-dependent manner
+ *	@qc: command to issue to device
+ *
+ *	Using various libata functions and hooks, this function
+ *	starts an ATA command.  ATA commands are grouped into
+ *	classes called "protocols", and issuing each type of protocol
+ *	is slightly different.
+ *
+ *	May be used as the qc_issue() entry in ata_port_operations.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ *
+ *	RETURNS:
+ *	Zero on success, AC_ERR_* mask on failure
+ */
+unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+
+	/* Use polling pio if the LLD doesn't handle
+	 * interrupt driven pio and atapi CDB interrupt.
+	 */
+	if (ap->flags & ATA_FLAG_PIO_POLLING) {
+		switch (qc->tf.protocol) {
+		case ATA_PROT_PIO:
+		case ATA_PROT_NODATA:
+		case ATAPI_PROT_PIO:
+		case ATAPI_PROT_NODATA:
+			qc->tf.flags |= ATA_TFLAG_POLLING;
+			break;
+		case ATAPI_PROT_DMA:
+			if (qc->dev->flags & ATA_DFLAG_CDB_INTR)
+				/* see ata_dma_blacklisted() */
+				BUG();
+			break;
+		default:
+			break;
+		}
+	}
+
+	/* select the device */
+	ata_dev_select(ap, qc->dev->devno, 1, 0);
+
+	/* start the command */
+	switch (qc->tf.protocol) {
+	case ATA_PROT_NODATA:
+		if (qc->tf.flags & ATA_TFLAG_POLLING)
+			ata_qc_set_polling(qc);
+
+		ata_tf_to_host(ap, &qc->tf);
+		ap->hsm_task_state = HSM_ST_LAST;
+
+		if (qc->tf.flags & ATA_TFLAG_POLLING)
+			ata_pio_queue_task(ap, qc, 0);
+
+		break;
+
+	case ATA_PROT_DMA:
+		WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING);
+
+		ap->ops->tf_load(ap, &qc->tf);	 /* load tf registers */
+		ap->ops->bmdma_setup(qc);	    /* set up bmdma */
+		ap->ops->bmdma_start(qc);	    /* initiate bmdma */
+		ap->hsm_task_state = HSM_ST_LAST;
+		break;
+
+	case ATA_PROT_PIO:
+		if (qc->tf.flags & ATA_TFLAG_POLLING)
+			ata_qc_set_polling(qc);
+
+		ata_tf_to_host(ap, &qc->tf);
+
+		if (qc->tf.flags & ATA_TFLAG_WRITE) {
+			/* PIO data out protocol */
+			ap->hsm_task_state = HSM_ST_FIRST;
+			ata_pio_queue_task(ap, qc, 0);
+
+			/* always send first data block using
+			 * the ata_pio_task() codepath.
+			 */
+		} else {
+			/* PIO data in protocol */
+			ap->hsm_task_state = HSM_ST;
+
+			if (qc->tf.flags & ATA_TFLAG_POLLING)
+				ata_pio_queue_task(ap, qc, 0);
+
+			/* if polling, ata_pio_task() handles the rest.
+			 * otherwise, interrupt handler takes over from here.
+			 */
+		}
+
+		break;
+
+	case ATAPI_PROT_PIO:
+	case ATAPI_PROT_NODATA:
+		if (qc->tf.flags & ATA_TFLAG_POLLING)
+			ata_qc_set_polling(qc);
+
+		ata_tf_to_host(ap, &qc->tf);
+
+		ap->hsm_task_state = HSM_ST_FIRST;
+
+		/* send cdb by polling if no cdb interrupt */
+		if ((!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) ||
+		    (qc->tf.flags & ATA_TFLAG_POLLING))
+			ata_pio_queue_task(ap, qc, 0);
+		break;
+
+	case ATAPI_PROT_DMA:
+		WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING);
+
+		ap->ops->tf_load(ap, &qc->tf);	 /* load tf registers */
+		ap->ops->bmdma_setup(qc);	    /* set up bmdma */
+		ap->hsm_task_state = HSM_ST_FIRST;
+
+		/* send cdb by polling if no cdb interrupt */
+		if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
+			ata_pio_queue_task(ap, qc, 0);
+		break;
+
+	default:
+		WARN_ON(1);
+		return AC_ERR_SYSTEM;
+	}
+
+	return 0;
+}
+
+/**
+ *	ata_host_intr - Handle host interrupt for given (port, task)
+ *	@ap: Port on which interrupt arrived (possibly...)
+ *	@qc: Taskfile currently active in engine
+ *
+ *	Handle host interrupt for given queued command.  Currently,
+ *	only DMA interrupts are handled.  All other commands are
+ *	handled via polling with interrupts disabled (nIEN bit).
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ *
+ *	RETURNS:
+ *	One if interrupt was handled, zero if not (shared irq).
+ */
+inline unsigned int ata_host_intr(struct ata_port *ap,
+				  struct ata_queued_cmd *qc)
+{
+	struct ata_eh_info *ehi = &ap->link.eh_info;
+	u8 status, host_stat = 0;
+
+	VPRINTK("ata%u: protocol %d task_state %d\n",
+		ap->print_id, qc->tf.protocol, ap->hsm_task_state);
+
+	/* Check whether we are expecting interrupt in this state */
+	switch (ap->hsm_task_state) {
+	case HSM_ST_FIRST:
+		/* Some pre-ATAPI-4 devices assert INTRQ
+		 * at this state when ready to receive CDB.
+		 */
+
+		/* Check the ATA_DFLAG_CDB_INTR flag is enough here.
+		 * The flag was turned on only for atapi devices.  No
+		 * need to check ata_is_atapi(qc->tf.protocol) again.
+		 */
+		if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
+			goto idle_irq;
+		break;
+	case HSM_ST_LAST:
+		if (qc->tf.protocol == ATA_PROT_DMA ||
+		    qc->tf.protocol == ATAPI_PROT_DMA) {
+			/* check status of DMA engine */
+			host_stat = ap->ops->bmdma_status(ap);
+			VPRINTK("ata%u: host_stat 0x%X\n",
+				ap->print_id, host_stat);
+
+			/* if it's not our irq... */
+			if (!(host_stat & ATA_DMA_INTR))
+				goto idle_irq;
+
+			/* before we do anything else, clear DMA-Start bit */
+			ap->ops->bmdma_stop(qc);
+
+			if (unlikely(host_stat & ATA_DMA_ERR)) {
+				/* error when transfering data to/from memory */
+				qc->err_mask |= AC_ERR_HOST_BUS;
+				ap->hsm_task_state = HSM_ST_ERR;
+			}
+		}
+		break;
+	case HSM_ST:
+		break;
+	default:
+		goto idle_irq;
+	}
+
+	/* check altstatus */
+	status = ata_altstatus(ap);
+	if (status & ATA_BUSY)
+		goto idle_irq;
+
+	/* check main status, clearing INTRQ */
+	status = ata_chk_status(ap);
+	if (unlikely(status & ATA_BUSY))
+		goto idle_irq;
+
+	/* ack bmdma irq events */
+	ap->ops->irq_clear(ap);
+
+	ata_hsm_move(ap, qc, status, 0);
+
+	if (unlikely(qc->err_mask) && (qc->tf.protocol == ATA_PROT_DMA ||
+				       qc->tf.protocol == ATAPI_PROT_DMA))
+		ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat);
+
+	return 1;	/* irq handled */
+
+idle_irq:
+	ap->stats.idle_irq++;
+
+#ifdef ATA_IRQ_TRAP
+	if ((ap->stats.idle_irq % 1000) == 0) {
+		ata_chk_status(ap);
+		ap->ops->irq_clear(ap);
+		ata_port_printk(ap, KERN_WARNING, "irq trap\n");
+		return 1;
+	}
+#endif
+	return 0;	/* irq not handled */
+}
+
+/**
+ *	ata_interrupt - Default ATA host interrupt handler
+ *	@irq: irq line (unused)
+ *	@dev_instance: pointer to our ata_host information structure
+ *
+ *	Default interrupt handler for PCI IDE devices.  Calls
+ *	ata_host_intr() for each port that is not disabled.
+ *
+ *	LOCKING:
+ *	Obtains host lock during operation.
+ *
+ *	RETURNS:
+ *	IRQ_NONE or IRQ_HANDLED.
+ */
+irqreturn_t ata_interrupt(int irq, void *dev_instance)
+{
+	struct ata_host *host = dev_instance;
+	unsigned int i;
+	unsigned int handled = 0;
+	unsigned long flags;
+
+	/* TODO: make _irqsave conditional on x86 PCI IDE legacy mode */
+	spin_lock_irqsave(&host->lock, flags);
+
+	for (i = 0; i < host->n_ports; i++) {
+		struct ata_port *ap;
+
+		ap = host->ports[i];
+		if (ap &&
+		    !(ap->flags & ATA_FLAG_DISABLED)) {
+			struct ata_queued_cmd *qc;
+
+			qc = ata_qc_from_tag(ap, ap->link.active_tag);
+			if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)) &&
+			    (qc->flags & ATA_QCFLAG_ACTIVE))
+				handled |= ata_host_intr(ap, qc);
+		}
+	}
+
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	return IRQ_RETVAL(handled);
+}
+
+/**
+ *	ata_bmdma_freeze - Freeze BMDMA controller port
+ *	@ap: port to freeze
+ *
+ *	Freeze BMDMA controller port.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+void ata_bmdma_freeze(struct ata_port *ap)
+{
+	struct ata_ioports *ioaddr = &ap->ioaddr;
+
+	ap->ctl |= ATA_NIEN;
+	ap->last_ctl = ap->ctl;
+
+	if (ioaddr->ctl_addr)
+		iowrite8(ap->ctl, ioaddr->ctl_addr);
+
+	/* Under certain circumstances, some controllers raise IRQ on
+	 * ATA_NIEN manipulation.  Also, many controllers fail to mask
+	 * previously pending IRQ on ATA_NIEN assertion.  Clear it.
+	 */
+	ata_chk_status(ap);
+
+	ap->ops->irq_clear(ap);
+}
+
+/**
+ *	ata_bmdma_thaw - Thaw BMDMA controller port
+ *	@ap: port to thaw
+ *
+ *	Thaw BMDMA controller port.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+void ata_bmdma_thaw(struct ata_port *ap)
 {
-	if (ap->ops->check_altstatus)
-		return ap->ops->check_altstatus(ap);
-
-	return ioread8(ap->ioaddr.altstatus_addr);
+	/* clear & re-enable interrupts */
+	ata_chk_status(ap);
+	ap->ops->irq_clear(ap);
+	ap->ops->irq_on(ap);
 }
 
 /**
- *	ata_irq_on - Enable interrupts on a port.
- *	@ap: Port on which interrupts are enabled.
+ *	ata_devchk - PATA device presence detection
+ *	@ap: ATA channel to examine
+ *	@device: Device to examine (starting at zero)
  *
- *	Enable interrupts on a legacy IDE device using MMIO or PIO,
- *	wait for idle, clear any pending interrupts.
+ *	This technique was originally described in
+ *	Hale Landis's ATADRVR (www.ata-atapi.com), and
+ *	later found its way into the ATA/ATAPI spec.
+ *
+ *	Write a pattern to the ATA shadow registers,
+ *	and if a device is present, it will respond by
+ *	correctly storing and echoing back the
+ *	ATA shadow register contents.
  *
  *	LOCKING:
- *	Inherited from caller.
+ *	caller.
  */
-u8 ata_irq_on(struct ata_port *ap)
+static unsigned int ata_devchk(struct ata_port *ap, unsigned int device)
 {
 	struct ata_ioports *ioaddr = &ap->ioaddr;
-	u8 tmp;
+	u8 nsect, lbal;
 
-	ap->ctl &= ~ATA_NIEN;
-	ap->last_ctl = ap->ctl;
+	ap->ops->dev_select(ap, device);
 
-	if (ioaddr->ctl_addr)
-		iowrite8(ap->ctl, ioaddr->ctl_addr);
-	tmp = ata_wait_idle(ap);
+	iowrite8(0x55, ioaddr->nsect_addr);
+	iowrite8(0xaa, ioaddr->lbal_addr);
 
-	ap->ops->irq_clear(ap);
+	iowrite8(0xaa, ioaddr->nsect_addr);
+	iowrite8(0x55, ioaddr->lbal_addr);
 
-	return tmp;
+	iowrite8(0x55, ioaddr->nsect_addr);
+	iowrite8(0xaa, ioaddr->lbal_addr);
+
+	nsect = ioread8(ioaddr->nsect_addr);
+	lbal = ioread8(ioaddr->lbal_addr);
+
+	if ((nsect == 0x55) && (lbal == 0xaa))
+		return 1;	/* we found a device */
+
+	return 0;		/* nothing found */
 }
 
 /**
- *	ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt.
- *	@ap: Port associated with this ATA transaction.
+ *	ata_dev_try_classify - Parse returned ATA device signature
+ *	@dev: ATA device to classify (starting at zero)
+ *	@present: device seems present
+ *	@r_err: Value of error register on completion
  *
- *	Clear interrupt and error flags in DMA status register.
+ *	After an event -- SRST, E.D.D., or SATA COMRESET -- occurs,
+ *	an ATA/ATAPI-defined set of values is placed in the ATA
+ *	shadow registers, indicating the results of device detection
+ *	and diagnostics.
  *
- *	May be used as the irq_clear() entry in ata_port_operations.
+ *	Select the ATA device, and read the values from the ATA shadow
+ *	registers.  Then parse according to the Error register value,
+ *	and the spec-defined values examined by ata_dev_classify().
  *
  *	LOCKING:
- *	spin_lock_irqsave(host lock)
+ *	caller.
+ *
+ *	RETURNS:
+ *	Device type - %ATA_DEV_ATA, %ATA_DEV_ATAPI or %ATA_DEV_NONE.
  */
-void ata_bmdma_irq_clear(struct ata_port *ap)
+unsigned int ata_dev_try_classify(struct ata_device *dev, int present,
+				  u8 *r_err)
 {
-	void __iomem *mmio = ap->ioaddr.bmdma_addr;
+	struct ata_port *ap = dev->link->ap;
+	struct ata_taskfile tf;
+	unsigned int class;
+	u8 err;
+
+	ap->ops->dev_select(ap, dev->devno);
+
+	memset(&tf, 0, sizeof(tf));
+
+	ap->ops->tf_read(ap, &tf);
+	err = tf.feature;
+	if (r_err)
+		*r_err = err;
+
+	/* see if device passed diags: continue and warn later */
+	if (err == 0)
+		/* diagnostic fail : do nothing _YET_ */
+		dev->horkage |= ATA_HORKAGE_DIAGNOSTIC;
+	else if (err == 1)
+		/* do nothing */ ;
+	else if ((dev->devno == 0) && (err == 0x81))
+		/* do nothing */ ;
+	else
+		return ATA_DEV_NONE;
 
-	if (!mmio)
-		return;
+	/* determine if device is ATA or ATAPI */
+	class = ata_dev_classify(&tf);
 
-	iowrite8(ioread8(mmio + ATA_DMA_STATUS), mmio + ATA_DMA_STATUS);
+	if (class == ATA_DEV_UNKNOWN) {
+		/* If the device failed diagnostic, it's likely to
+		 * have reported incorrect device signature too.
+		 * Assume ATA device if the device seems present but
+		 * device signature is invalid with diagnostic
+		 * failure.
+		 */
+		if (present && (dev->horkage & ATA_HORKAGE_DIAGNOSTIC))
+			class = ATA_DEV_ATA;
+		else
+			class = ATA_DEV_NONE;
+	} else if ((class == ATA_DEV_ATA) && (ata_chk_status(ap) == 0))
+		class = ATA_DEV_NONE;
+
+	return class;
 }
 
-/**
- *	ata_tf_load - send taskfile registers to host controller
- *	@ap: Port to which output is sent
- *	@tf: ATA taskfile register set
- *
- *	Outputs ATA taskfile to standard ATA host controller.
- *
- *	LOCKING:
- *	Inherited from caller.
- */
-void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
+static int ata_bus_post_reset(struct ata_port *ap, unsigned int devmask,
+			      unsigned long deadline)
 {
 	struct ata_ioports *ioaddr = &ap->ioaddr;
-	unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
+	unsigned int dev0 = devmask & (1 << 0);
+	unsigned int dev1 = devmask & (1 << 1);
+	int rc, ret = 0;
 
-	if (tf->ctl != ap->last_ctl) {
-		if (ioaddr->ctl_addr)
-			iowrite8(tf->ctl, ioaddr->ctl_addr);
-		ap->last_ctl = tf->ctl;
-		ata_wait_idle(ap);
+	/* if device 0 was found in ata_devchk, wait for its
+	 * BSY bit to clear
+	 */
+	if (dev0) {
+		rc = ata_wait_ready(ap, deadline);
+		if (rc) {
+			if (rc != -ENODEV)
+				return rc;
+			ret = rc;
+		}
 	}
 
-	if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
-		WARN_ON(!ioaddr->ctl_addr);
-		iowrite8(tf->hob_feature, ioaddr->feature_addr);
-		iowrite8(tf->hob_nsect, ioaddr->nsect_addr);
-		iowrite8(tf->hob_lbal, ioaddr->lbal_addr);
-		iowrite8(tf->hob_lbam, ioaddr->lbam_addr);
-		iowrite8(tf->hob_lbah, ioaddr->lbah_addr);
-		VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
-			tf->hob_feature,
-			tf->hob_nsect,
-			tf->hob_lbal,
-			tf->hob_lbam,
-			tf->hob_lbah);
-	}
+	/* if device 1 was found in ata_devchk, wait for register
+	 * access briefly, then wait for BSY to clear.
+	 */
+	if (dev1) {
+		int i;
 
-	if (is_addr) {
-		iowrite8(tf->feature, ioaddr->feature_addr);
-		iowrite8(tf->nsect, ioaddr->nsect_addr);
-		iowrite8(tf->lbal, ioaddr->lbal_addr);
-		iowrite8(tf->lbam, ioaddr->lbam_addr);
-		iowrite8(tf->lbah, ioaddr->lbah_addr);
-		VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
-			tf->feature,
-			tf->nsect,
-			tf->lbal,
-			tf->lbam,
-			tf->lbah);
-	}
+		ap->ops->dev_select(ap, 1);
 
-	if (tf->flags & ATA_TFLAG_DEVICE) {
-		iowrite8(tf->device, ioaddr->device_addr);
-		VPRINTK("device 0x%X\n", tf->device);
+		/* Wait for register access.  Some ATAPI devices fail
+		 * to set nsect/lbal after reset, so don't waste too
+		 * much time on it.  We're gonna wait for !BSY anyway.
+		 */
+		for (i = 0; i < 2; i++) {
+			u8 nsect, lbal;
+
+			nsect = ioread8(ioaddr->nsect_addr);
+			lbal = ioread8(ioaddr->lbal_addr);
+			if ((nsect == 1) && (lbal == 1))
+				break;
+			msleep(50);	/* give drive a breather */
+		}
+
+		rc = ata_wait_ready(ap, deadline);
+		if (rc) {
+			if (rc != -ENODEV)
+				return rc;
+			ret = rc;
+		}
 	}
 
-	ata_wait_idle(ap);
+	/* is all this really necessary? */
+	ap->ops->dev_select(ap, 0);
+	if (dev1)
+		ap->ops->dev_select(ap, 1);
+	if (dev0)
+		ap->ops->dev_select(ap, 0);
+
+	return ret;
 }
 
 /**
- *	ata_tf_read - input device's ATA taskfile shadow registers
- *	@ap: Port from which input is read
- *	@tf: ATA taskfile register set for storing input
+ *	ata_wait_after_reset - wait before checking status after reset
+ *	@ap: port containing status register to be polled
+ *	@deadline: deadline jiffies for the operation
  *
- *	Reads ATA taskfile registers for currently-selected device
- *	into @tf. Assumes the device has a fully SFF compliant task file
- *	layout and behaviour. If you device does not (eg has a different
- *	status method) then you will need to provide a replacement tf_read
+ *	After reset, we need to pause a while before reading status.
+ *	Also, certain combination of controller and device report 0xff
+ *	for some duration (e.g. until SATA PHY is up and running)
+ *	which is interpreted as empty port in ATA world.  This
+ *	function also waits for such devices to get out of 0xff
+ *	status.
  *
  *	LOCKING:
- *	Inherited from caller.
+ *	Kernel thread context (may sleep).
  */
-void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
+void ata_wait_after_reset(struct ata_port *ap, unsigned long deadline)
 {
-	struct ata_ioports *ioaddr = &ap->ioaddr;
+	unsigned long until = jiffies + ATA_TMOUT_FF_WAIT;
+
+	if (time_before(until, deadline))
+		deadline = until;
+
+	/* Spec mandates ">= 2ms" before checking status.  We wait
+	 * 150ms, because that was the magic delay used for ATAPI
+	 * devices in Hale Landis's ATADRVR, for the period of time
+	 * between when the ATA command register is written, and then
+	 * status is checked.  Because waiting for "a while" before
+	 * checking status is fine, post SRST, we perform this magic
+	 * delay here as well.
+	 *
+	 * Old drivers/ide uses the 2mS rule and then waits for ready.
+	 */
+	msleep(150);
 
-	tf->command = ata_check_status(ap);
-	tf->feature = ioread8(ioaddr->error_addr);
-	tf->nsect = ioread8(ioaddr->nsect_addr);
-	tf->lbal = ioread8(ioaddr->lbal_addr);
-	tf->lbam = ioread8(ioaddr->lbam_addr);
-	tf->lbah = ioread8(ioaddr->lbah_addr);
-	tf->device = ioread8(ioaddr->device_addr);
+	/* Wait for 0xff to clear.  Some SATA devices take a long time
+	 * to clear 0xff after reset.  For example, HHD424020F7SV00
+	 * iVDR needs >= 800ms while.  Quantum GoVault needs even more
+	 * than that.
+	 *
+	 * Note that some PATA controllers (pata_ali) explode if
+	 * status register is read more than once when there's no
+	 * device attached.
+	 */
+	if (ap->flags & ATA_FLAG_SATA) {
+		while (1) {
+			u8 status = ata_chk_status(ap);
 
-	if (tf->flags & ATA_TFLAG_LBA48) {
-		if (likely(ioaddr->ctl_addr)) {
-			iowrite8(tf->ctl | ATA_HOB, ioaddr->ctl_addr);
-			tf->hob_feature = ioread8(ioaddr->error_addr);
-			tf->hob_nsect = ioread8(ioaddr->nsect_addr);
-			tf->hob_lbal = ioread8(ioaddr->lbal_addr);
-			tf->hob_lbam = ioread8(ioaddr->lbam_addr);
-			tf->hob_lbah = ioread8(ioaddr->lbah_addr);
-			iowrite8(tf->ctl, ioaddr->ctl_addr);
-			ap->last_ctl = tf->ctl;
-		} else
-			WARN_ON(1);
+			if (status != 0xff || time_after(jiffies, deadline))
+				return;
+
+			msleep(50);
+		}
 	}
 }
 
-/**
- *	ata_exec_command - issue ATA command to host controller
- *	@ap: port to which command is being issued
- *	@tf: ATA taskfile register set
- *
- *	Issues ATA command, with proper synchronization with interrupt
- *	handler / other threads.
- *
- *	LOCKING:
- *	spin_lock_irqsave(host lock)
- */
-void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf)
+static int ata_bus_softreset(struct ata_port *ap, unsigned int devmask,
+			     unsigned long deadline)
 {
-	DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command);
+	struct ata_ioports *ioaddr = &ap->ioaddr;
 
-	iowrite8(tf->command, ap->ioaddr.command_addr);
-	ata_pause(ap);
+	DPRINTK("ata%u: bus reset via SRST\n", ap->print_id);
+
+	/* software reset.  causes dev0 to be selected */
+	iowrite8(ap->ctl, ioaddr->ctl_addr);
+	udelay(20);	/* FIXME: flush */
+	iowrite8(ap->ctl | ATA_SRST, ioaddr->ctl_addr);
+	udelay(20);	/* FIXME: flush */
+	iowrite8(ap->ctl, ioaddr->ctl_addr);
+
+	/* wait a while before checking status */
+	ata_wait_after_reset(ap, deadline);
+
+	/* Before we perform post reset processing we want to see if
+	 * the bus shows 0xFF because the odd clown forgets the D7
+	 * pulldown resistor.
+	 */
+	if (ata_chk_status(ap) == 0xFF)
+		return -ENODEV;
+
+	return ata_bus_post_reset(ap, devmask, deadline);
 }
 
 /**
- *	ata_bmdma_freeze - Freeze BMDMA controller port
- *	@ap: port to freeze
+ *	ata_std_softreset - reset host port via ATA SRST
+ *	@link: ATA link to reset
+ *	@classes: resulting classes of attached devices
+ *	@deadline: deadline jiffies for the operation
  *
- *	Freeze BMDMA controller port.
+ *	Reset host port using ATA SRST.
  *
  *	LOCKING:
- *	Inherited from caller.
+ *	Kernel thread context (may sleep)
+ *
+ *	RETURNS:
+ *	0 on success, -errno otherwise.
  */
-void ata_bmdma_freeze(struct ata_port *ap)
+int ata_std_softreset(struct ata_link *link, unsigned int *classes,
+		      unsigned long deadline)
 {
-	struct ata_ioports *ioaddr = &ap->ioaddr;
+	struct ata_port *ap = link->ap;
+	unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
+	unsigned int devmask = 0;
+	int rc;
+	u8 err;
 
-	ap->ctl |= ATA_NIEN;
-	ap->last_ctl = ap->ctl;
+	DPRINTK("ENTER\n");
 
-	if (ioaddr->ctl_addr)
-		iowrite8(ap->ctl, ioaddr->ctl_addr);
+	if (ata_link_offline(link)) {
+		classes[0] = ATA_DEV_NONE;
+		goto out;
+	}
 
-	/* Under certain circumstances, some controllers raise IRQ on
-	 * ATA_NIEN manipulation.  Also, many controllers fail to mask
-	 * previously pending IRQ on ATA_NIEN assertion.  Clear it.
-	 */
-	ata_chk_status(ap);
+	/* determine if device 0/1 are present */
+	if (ata_devchk(ap, 0))
+		devmask |= (1 << 0);
+	if (slave_possible && ata_devchk(ap, 1))
+		devmask |= (1 << 1);
+
+	/* select device 0 again */
+	ap->ops->dev_select(ap, 0);
+
+	/* issue bus reset */
+	DPRINTK("about to softreset, devmask=%x\n", devmask);
+	rc = ata_bus_softreset(ap, devmask, deadline);
+	/* if link is occupied, -ENODEV too is an error */
+	if (rc && (rc != -ENODEV || sata_scr_valid(link))) {
+		ata_link_printk(link, KERN_ERR, "SRST failed (errno=%d)\n", rc);
+		return rc;
+	}
 
-	ap->ops->irq_clear(ap);
+	/* determine by signature whether we have ATA or ATAPI devices */
+	classes[0] = ata_dev_try_classify(&link->device[0],
+					  devmask & (1 << 0), &err);
+	if (slave_possible && err != 0x81)
+		classes[1] = ata_dev_try_classify(&link->device[1],
+						  devmask & (1 << 1), &err);
+
+ out:
+	DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]);
+	return 0;
 }
 
 /**
- *	ata_bmdma_thaw - Thaw BMDMA controller port
- *	@ap: port to thaw
+ *	sata_std_hardreset - reset host port via SATA phy reset
+ *	@link: link to reset
+ *	@class: resulting class of attached device
+ *	@deadline: deadline jiffies for the operation
  *
- *	Thaw BMDMA controller port.
+ *	SATA phy-reset host port using DET bits of SControl register,
+ *	wait for !BSY and classify the attached device.
  *
  *	LOCKING:
- *	Inherited from caller.
+ *	Kernel thread context (may sleep)
+ *
+ *	RETURNS:
+ *	0 on success, -errno otherwise.
  */
-void ata_bmdma_thaw(struct ata_port *ap)
+int sata_std_hardreset(struct ata_link *link, unsigned int *class,
+		       unsigned long deadline)
 {
-	/* clear & re-enable interrupts */
-	ata_chk_status(ap);
-	ap->ops->irq_clear(ap);
-	ap->ops->irq_on(ap);
+	struct ata_port *ap = link->ap;
+	const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
+	int rc;
+
+	DPRINTK("ENTER\n");
+
+	/* do hardreset */
+	rc = sata_link_hardreset(link, timing, deadline);
+	if (rc) {
+		ata_link_printk(link, KERN_ERR,
+				"COMRESET failed (errno=%d)\n", rc);
+		return rc;
+	}
+
+	/* TODO: phy layer with polling, timeouts, etc. */
+	if (ata_link_offline(link)) {
+		*class = ATA_DEV_NONE;
+		DPRINTK("EXIT, link offline\n");
+		return 0;
+	}
+
+	/* wait a while before checking status */
+	ata_wait_after_reset(ap, deadline);
+
+	/* If PMP is supported, we have to do follow-up SRST.  Note
+	 * that some PMPs don't send D2H Reg FIS after hardreset at
+	 * all if the first port is empty.  Wait for it just for a
+	 * second and request follow-up SRST.
+	 */
+	if (ap->flags & ATA_FLAG_PMP) {
+		ata_wait_ready(ap, jiffies + HZ);
+		return -EAGAIN;
+	}
+
+	rc = ata_wait_ready(ap, deadline);
+	/* link occupied, -ENODEV too is an error */
+	if (rc) {
+		ata_link_printk(link, KERN_ERR,
+				"COMRESET failed (errno=%d)\n", rc);
+		return rc;
+	}
+
+	ap->ops->dev_select(ap, 0);	/* probably unnecessary */
+
+	*class = ata_dev_try_classify(link->device, 1, NULL);
+
+	DPRINTK("EXIT, class=%u\n", *class);
+	return 0;
 }
 
 /**
@@ -393,6 +2092,31 @@ int ata_sff_port_start(struct ata_port *ap)
 	return 0;
 }
 
+/**
+ *	ata_std_ports - initialize ioaddr with standard port offsets.
+ *	@ioaddr: IO address structure to be initialized
+ *
+ *	Utility function which initializes data_addr, error_addr,
+ *	feature_addr, nsect_addr, lbal_addr, lbam_addr, lbah_addr,
+ *	device_addr, status_addr, and command_addr to standard offsets
+ *	relative to cmd_addr.
+ *
+ *	Does not set ctl_addr, altstatus_addr, bmdma_addr, or scr_addr.
+ */
+void ata_std_ports(struct ata_ioports *ioaddr)
+{
+	ioaddr->data_addr = ioaddr->cmd_addr + ATA_REG_DATA;
+	ioaddr->error_addr = ioaddr->cmd_addr + ATA_REG_ERR;
+	ioaddr->feature_addr = ioaddr->cmd_addr + ATA_REG_FEATURE;
+	ioaddr->nsect_addr = ioaddr->cmd_addr + ATA_REG_NSECT;
+	ioaddr->lbal_addr = ioaddr->cmd_addr + ATA_REG_LBAL;
+	ioaddr->lbam_addr = ioaddr->cmd_addr + ATA_REG_LBAM;
+	ioaddr->lbah_addr = ioaddr->cmd_addr + ATA_REG_LBAH;
+	ioaddr->device_addr = ioaddr->cmd_addr + ATA_REG_DEVICE;
+	ioaddr->status_addr = ioaddr->cmd_addr + ATA_REG_STATUS;
+	ioaddr->command_addr = ioaddr->cmd_addr + ATA_REG_CMD;
+}
+
 /**
  *	ata_bmdma_setup - Set up PCI IDE BMDMA transaction
  *	@qc: Info associated with this ATA transaction.
@@ -494,11 +2218,94 @@ u8 ata_bmdma_status(struct ata_port *ap)
 }
 
 /**
- *	ata_noop_irq_clear - Noop placeholder for irq_clear
- *	@ap: Port associated with this ATA transaction.
+ *	ata_bus_reset - reset host port and associated ATA channel
+ *	@ap: port to reset
+ *
+ *	This is typically the first time we actually start issuing
+ *	commands to the ATA channel.  We wait for BSY to clear, then
+ *	issue EXECUTE DEVICE DIAGNOSTIC command, polling for its
+ *	result.  Determine what devices, if any, are on the channel
+ *	by looking at the device 0/1 error register.  Look at the signature
+ *	stored in each device's taskfile registers, to determine if
+ *	the device is ATA or ATAPI.
+ *
+ *	LOCKING:
+ *	PCI/etc. bus probe sem.
+ *	Obtains host lock.
+ *
+ *	SIDE EFFECTS:
+ *	Sets ATA_FLAG_DISABLED if bus reset fails.
+ *
+ *	DEPRECATED:
+ *	This function is only for drivers which still use old EH and
+ *	will be removed soon.
  */
-void ata_noop_irq_clear(struct ata_port *ap)
+void ata_bus_reset(struct ata_port *ap)
 {
+	struct ata_device *device = ap->link.device;
+	struct ata_ioports *ioaddr = &ap->ioaddr;
+	unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
+	u8 err;
+	unsigned int dev0, dev1 = 0, devmask = 0;
+	int rc;
+
+	DPRINTK("ENTER, host %u, port %u\n", ap->print_id, ap->port_no);
+
+	/* determine if device 0/1 are present */
+	if (ap->flags & ATA_FLAG_SATA_RESET)
+		dev0 = 1;
+	else {
+		dev0 = ata_devchk(ap, 0);
+		if (slave_possible)
+			dev1 = ata_devchk(ap, 1);
+	}
+
+	if (dev0)
+		devmask |= (1 << 0);
+	if (dev1)
+		devmask |= (1 << 1);
+
+	/* select device 0 again */
+	ap->ops->dev_select(ap, 0);
+
+	/* issue bus reset */
+	if (ap->flags & ATA_FLAG_SRST) {
+		rc = ata_bus_softreset(ap, devmask, jiffies + 40 * HZ);
+		if (rc && rc != -ENODEV)
+			goto err_out;
+	}
+
+	/*
+	 * determine by signature whether we have ATA or ATAPI devices
+	 */
+	device[0].class = ata_dev_try_classify(&device[0], dev0, &err);
+	if ((slave_possible) && (err != 0x81))
+		device[1].class = ata_dev_try_classify(&device[1], dev1, &err);
+
+	/* is double-select really necessary? */
+	if (device[1].class != ATA_DEV_NONE)
+		ap->ops->dev_select(ap, 1);
+	if (device[0].class != ATA_DEV_NONE)
+		ap->ops->dev_select(ap, 0);
+
+	/* if no devices were detected, disable this port */
+	if ((device[0].class == ATA_DEV_NONE) &&
+	    (device[1].class == ATA_DEV_NONE))
+		goto err_out;
+
+	if (ap->flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST)) {
+		/* set up device control for ATA_FLAG_SATA_RESET */
+		iowrite8(ap->ctl, ioaddr->ctl_addr);
+	}
+
+	DPRINTK("EXIT\n");
+	return;
+
+err_out:
+	ata_port_printk(ap, KERN_ERR, "disabling port\n");
+	ata_port_disable(ap);
+
+	DPRINTK("EXIT\n");
 }
 
 #ifdef CONFIG_PCI
@@ -914,3 +2721,49 @@ int ata_pci_init_one(struct pci_dev *pdev,
 
 #endif /* CONFIG_PCI */
 
+EXPORT_SYMBOL_GPL(ata_sff_port_ops);
+EXPORT_SYMBOL_GPL(ata_bmdma_port_ops);
+EXPORT_SYMBOL_GPL(ata_qc_prep);
+EXPORT_SYMBOL_GPL(ata_dumb_qc_prep);
+EXPORT_SYMBOL_GPL(ata_std_dev_select);
+EXPORT_SYMBOL_GPL(ata_check_status);
+EXPORT_SYMBOL_GPL(ata_altstatus);
+EXPORT_SYMBOL_GPL(ata_busy_sleep);
+EXPORT_SYMBOL_GPL(ata_wait_ready);
+EXPORT_SYMBOL_GPL(ata_tf_load);
+EXPORT_SYMBOL_GPL(ata_tf_read);
+EXPORT_SYMBOL_GPL(ata_exec_command);
+EXPORT_SYMBOL_GPL(ata_data_xfer);
+EXPORT_SYMBOL_GPL(ata_data_xfer_noirq);
+EXPORT_SYMBOL_GPL(ata_irq_on);
+EXPORT_SYMBOL_GPL(ata_bmdma_irq_clear);
+EXPORT_SYMBOL_GPL(ata_hsm_move);
+EXPORT_SYMBOL_GPL(ata_qc_issue_prot);
+EXPORT_SYMBOL_GPL(ata_host_intr);
+EXPORT_SYMBOL_GPL(ata_interrupt);
+EXPORT_SYMBOL_GPL(ata_bmdma_freeze);
+EXPORT_SYMBOL_GPL(ata_bmdma_thaw);
+EXPORT_SYMBOL_GPL(ata_std_prereset);
+EXPORT_SYMBOL_GPL(ata_dev_try_classify);
+EXPORT_SYMBOL_GPL(ata_wait_after_reset);
+EXPORT_SYMBOL_GPL(ata_std_softreset);
+EXPORT_SYMBOL_GPL(sata_std_hardreset);
+EXPORT_SYMBOL_GPL(ata_std_postreset);
+EXPORT_SYMBOL_GPL(ata_bmdma_error_handler);
+EXPORT_SYMBOL_GPL(ata_bmdma_post_internal_cmd);
+EXPORT_SYMBOL_GPL(ata_sff_port_start);
+EXPORT_SYMBOL_GPL(ata_std_ports);
+EXPORT_SYMBOL_GPL(ata_bmdma_setup);
+EXPORT_SYMBOL_GPL(ata_bmdma_start);
+EXPORT_SYMBOL_GPL(ata_bmdma_stop);
+EXPORT_SYMBOL_GPL(ata_bmdma_status);
+EXPORT_SYMBOL_GPL(ata_bus_reset);
+#ifdef CONFIG_PCI
+EXPORT_SYMBOL_GPL(ata_pci_clear_simplex);
+EXPORT_SYMBOL_GPL(ata_pci_default_filter);
+EXPORT_SYMBOL_GPL(ata_pci_init_bmdma);
+EXPORT_SYMBOL_GPL(ata_pci_init_sff_host);
+EXPORT_SYMBOL_GPL(ata_pci_prepare_sff_host);
+EXPORT_SYMBOL_GPL(ata_pci_activate_sff_host);
+EXPORT_SYMBOL_GPL(ata_pci_init_one);
+#endif /* CONFIG_PCI */
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index aa884f71a12a..a69f663c7402 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -67,6 +67,8 @@ extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
 			   unsigned int tag);
 extern u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev);
 extern void ata_dev_disable(struct ata_device *dev);
+extern void ata_pio_queue_task(struct ata_port *ap, void *data,
+			       unsigned long delay);
 extern void ata_port_flush_task(struct ata_port *ap);
 extern unsigned ata_exec_internal(struct ata_device *dev,
 				  struct ata_taskfile *tf, const u8 *cdb,
@@ -91,8 +93,6 @@ extern void ata_qc_free(struct ata_queued_cmd *qc);
 extern void ata_qc_issue(struct ata_queued_cmd *qc);
 extern void __ata_qc_complete(struct ata_queued_cmd *qc);
 extern int ata_check_atapi_dma(struct ata_queued_cmd *qc);
-extern void ata_dev_select(struct ata_port *ap, unsigned int device,
-                           unsigned int wait, unsigned int can_sleep);
 extern void swap_buf_le16(u16 *buf, unsigned int buf_words);
 extern int ata_flush_cache(struct ata_device *dev);
 extern void ata_dev_init(struct ata_device *dev);
@@ -194,7 +194,9 @@ extern int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
 extern void ata_eh_finish(struct ata_port *ap);
 
 /* libata-sff.c */
+extern void ata_dev_select(struct ata_port *ap, unsigned int device,
+                           unsigned int wait, unsigned int can_sleep);
 extern u8 ata_irq_on(struct ata_port *ap);
-
+extern void ata_pio_task(struct work_struct *work);
 
 #endif /* __LIBATA_H__ */
-- 
cgit v1.2.2


From 071ce34d57924edb76b76f7de460eb4991463959 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Tue, 25 Mar 2008 22:16:42 +0900
Subject: libata: move ata_pci_default_filter() out of CONFIG_PCI

ata_pci_default_filter() doesn't really have anything to do with PCI.
It's generally applicable to BMDMA controllers.  Move it out of
CONFIG_PCI.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/libata-sff.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 840ae6da59bc..ebdd46bc13c4 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -2117,6 +2117,16 @@ void ata_std_ports(struct ata_ioports *ioaddr)
 	ioaddr->command_addr = ioaddr->cmd_addr + ATA_REG_CMD;
 }
 
+unsigned long ata_pci_default_filter(struct ata_device *adev, unsigned long xfer_mask)
+{
+	/* Filter out DMA modes if the device has been configured by
+	   the BIOS as PIO only */
+
+	if (adev->link->ap->ioaddr.bmdma_addr == NULL)
+		xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
+	return xfer_mask;
+}
+
 /**
  *	ata_bmdma_setup - Set up PCI IDE BMDMA transaction
  *	@qc: Info associated with this ATA transaction.
@@ -2335,16 +2345,6 @@ int ata_pci_clear_simplex(struct pci_dev *pdev)
 	return 0;
 }
 
-unsigned long ata_pci_default_filter(struct ata_device *adev, unsigned long xfer_mask)
-{
-	/* Filter out DMA modes if the device has been configured by
-	   the BIOS as PIO only */
-
-	if (adev->link->ap->ioaddr.bmdma_addr == NULL)
-		xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
-	return xfer_mask;
-}
-
 /**
  *	ata_pci_init_bmdma - acquire PCI BMDMA resources and init ATA host
  *	@host: target ATA host
@@ -2725,6 +2725,7 @@ EXPORT_SYMBOL_GPL(ata_sff_port_ops);
 EXPORT_SYMBOL_GPL(ata_bmdma_port_ops);
 EXPORT_SYMBOL_GPL(ata_qc_prep);
 EXPORT_SYMBOL_GPL(ata_dumb_qc_prep);
+EXPORT_SYMBOL_GPL(ata_pci_default_filter);
 EXPORT_SYMBOL_GPL(ata_std_dev_select);
 EXPORT_SYMBOL_GPL(ata_check_status);
 EXPORT_SYMBOL_GPL(ata_altstatus);
@@ -2760,7 +2761,6 @@ EXPORT_SYMBOL_GPL(ata_bmdma_status);
 EXPORT_SYMBOL_GPL(ata_bus_reset);
 #ifdef CONFIG_PCI
 EXPORT_SYMBOL_GPL(ata_pci_clear_simplex);
-EXPORT_SYMBOL_GPL(ata_pci_default_filter);
 EXPORT_SYMBOL_GPL(ata_pci_init_bmdma);
 EXPORT_SYMBOL_GPL(ata_pci_init_sff_host);
 EXPORT_SYMBOL_GPL(ata_pci_prepare_sff_host);
-- 
cgit v1.2.2


From 3d5a3d67a578d95ac3a11a862d16a054e2d4d9cd Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Tue, 25 Mar 2008 22:16:43 +0900
Subject: libata: kill ata_chk_status() call from ata_dev_configure()

ata_dev_configure() isn't tied to any controller interface except for
the probe debug message printing at the end of the function.  Kill the
message.

This is to help separating out SFF support from core layer.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/libata-core.c | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 34c068f18350..54f85508bc6e 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2407,9 +2407,6 @@ int ata_dev_configure(struct ata_device *dev)
 		}
 	}
 
-	if (ata_msg_probe(ap))
-		ata_dev_printk(dev, KERN_DEBUG, "%s: EXIT, drv_stat = 0x%x\n",
-			__func__, ata_chk_status(ap));
 	return 0;
 
 err_out_nosup:
-- 
cgit v1.2.2


From 6fd36390117f7844ad147377878ddb52088f583a Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Tue, 25 Mar 2008 22:16:44 +0900
Subject: libata: kill ata_chk_status()

ata_chk_status() just calls ops->check_status and it only adds
confusion with other status functions.  Kill it.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/libata-sff.c    | 22 +++++++++++-----------
 drivers/ata/pata_bf54x.c    |  2 +-
 drivers/ata/pata_scc.c      |  2 +-
 drivers/ata/sata_inic162x.c | 10 +++++-----
 drivers/ata/sata_sil.c      |  6 +++---
 drivers/ata/sata_via.c      |  2 +-
 drivers/ata/sata_vsc.c      |  2 +-
 7 files changed, 23 insertions(+), 23 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index ebdd46bc13c4..c601dcef2925 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -290,7 +290,7 @@ int ata_busy_sleep(struct ata_port *ap,
 	while (status != 0xff && (status & ATA_BUSY) &&
 	       time_before(jiffies, timeout)) {
 		msleep(50);
-		status = ata_chk_status(ap);
+		status = ap->ops->check_status(ap);
 	}
 
 	if (status == 0xff)
@@ -326,7 +326,7 @@ int ata_wait_ready(struct ata_port *ap, unsigned long deadline)
 	int warned = 0;
 
 	while (1) {
-		u8 status = ata_chk_status(ap);
+		u8 status = ap->ops->check_status(ap);
 		unsigned long now = jiffies;
 
 		if (!(status & ATA_BUSY))
@@ -1486,7 +1486,7 @@ inline unsigned int ata_host_intr(struct ata_port *ap,
 		goto idle_irq;
 
 	/* check main status, clearing INTRQ */
-	status = ata_chk_status(ap);
+	status = ap->ops->check_status(ap);
 	if (unlikely(status & ATA_BUSY))
 		goto idle_irq;
 
@@ -1506,7 +1506,7 @@ idle_irq:
 
 #ifdef ATA_IRQ_TRAP
 	if ((ap->stats.idle_irq % 1000) == 0) {
-		ata_chk_status(ap);
+		ap->ops->check_status(ap);
 		ap->ops->irq_clear(ap);
 		ata_port_printk(ap, KERN_WARNING, "irq trap\n");
 		return 1;
@@ -1582,7 +1582,7 @@ void ata_bmdma_freeze(struct ata_port *ap)
 	 * ATA_NIEN manipulation.  Also, many controllers fail to mask
 	 * previously pending IRQ on ATA_NIEN assertion.  Clear it.
 	 */
-	ata_chk_status(ap);
+	ap->ops->check_status(ap);
 
 	ap->ops->irq_clear(ap);
 }
@@ -1599,7 +1599,7 @@ void ata_bmdma_freeze(struct ata_port *ap)
 void ata_bmdma_thaw(struct ata_port *ap)
 {
 	/* clear & re-enable interrupts */
-	ata_chk_status(ap);
+	ap->ops->check_status(ap);
 	ap->ops->irq_clear(ap);
 	ap->ops->irq_on(ap);
 }
@@ -1709,7 +1709,7 @@ unsigned int ata_dev_try_classify(struct ata_device *dev, int present,
 			class = ATA_DEV_ATA;
 		else
 			class = ATA_DEV_NONE;
-	} else if ((class == ATA_DEV_ATA) && (ata_chk_status(ap) == 0))
+	} else if ((class == ATA_DEV_ATA) && (ap->ops->check_status(ap) == 0))
 		class = ATA_DEV_NONE;
 
 	return class;
@@ -1820,7 +1820,7 @@ void ata_wait_after_reset(struct ata_port *ap, unsigned long deadline)
 	 */
 	if (ap->flags & ATA_FLAG_SATA) {
 		while (1) {
-			u8 status = ata_chk_status(ap);
+			u8 status = ap->ops->check_status(ap);
 
 			if (status != 0xff || time_after(jiffies, deadline))
 				return;
@@ -1851,7 +1851,7 @@ static int ata_bus_softreset(struct ata_port *ap, unsigned int devmask,
 	 * the bus shows 0xFF because the odd clown forgets the D7
 	 * pulldown resistor.
 	 */
-	if (ata_chk_status(ap) == 0xFF)
+	if (ap->ops->check_status(ap) == 0xFF)
 		return -ENODEV;
 
 	return ata_bus_post_reset(ap, devmask, deadline);
@@ -2034,7 +2034,7 @@ void ata_bmdma_error_handler(struct ata_port *ap)
 	}
 
 	ata_altstatus(ap);
-	ata_chk_status(ap);
+	ap->ops->check_status(ap);
 	ap->ops->irq_clear(ap);
 
 	spin_unlock_irqrestore(ap->lock, flags);
@@ -2725,7 +2725,6 @@ EXPORT_SYMBOL_GPL(ata_sff_port_ops);
 EXPORT_SYMBOL_GPL(ata_bmdma_port_ops);
 EXPORT_SYMBOL_GPL(ata_qc_prep);
 EXPORT_SYMBOL_GPL(ata_dumb_qc_prep);
-EXPORT_SYMBOL_GPL(ata_pci_default_filter);
 EXPORT_SYMBOL_GPL(ata_std_dev_select);
 EXPORT_SYMBOL_GPL(ata_check_status);
 EXPORT_SYMBOL_GPL(ata_altstatus);
@@ -2754,6 +2753,7 @@ EXPORT_SYMBOL_GPL(ata_bmdma_error_handler);
 EXPORT_SYMBOL_GPL(ata_bmdma_post_internal_cmd);
 EXPORT_SYMBOL_GPL(ata_sff_port_start);
 EXPORT_SYMBOL_GPL(ata_std_ports);
+EXPORT_SYMBOL_GPL(ata_pci_default_filter);
 EXPORT_SYMBOL_GPL(ata_bmdma_setup);
 EXPORT_SYMBOL_GPL(ata_bmdma_start);
 EXPORT_SYMBOL_GPL(ata_bmdma_stop);
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index eea275acb2a8..457ac800cd5e 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -1264,7 +1264,7 @@ static void bfin_bmdma_freeze(struct ata_port *ap)
 	 * ATA_NIEN manipulation.  Also, many controllers fail to mask
 	 * previously pending IRQ on ATA_NIEN assertion.  Clear it.
 	 */
-	ata_chk_status(ap);
+	ap->ops->check_status(ap);
 
 	bfin_irq_clear(ap);
 }
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index 07f2d7a6f1a8..85d33637dff9 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -854,7 +854,7 @@ static void scc_bmdma_freeze (struct ata_port *ap)
 	 * ATA_NIEN manipulation.  Also, many controllers fail to mask
 	 * previously pending IRQ on ATA_NIEN assertion.  Clear it.
 	 */
-	ata_chk_status(ap);
+	ap->ops->check_status(ap);
 
 	ap->ops->irq_clear(ap);
 }
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index ba1c09953517..12fbf3868fe2 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -267,14 +267,14 @@ static void inic_host_intr(struct ata_port *ap)
 			ata_qc_from_tag(ap, ap->link.active_tag);
 
 		if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) {
-			ata_chk_status(ap);	/* clear ATA interrupt */
+			ap->ops->check_status(ap); /* clear ATA interrupt */
 			return;
 		}
 
 		if (likely(ata_host_intr(ap, qc)))
 			return;
 
-		ata_chk_status(ap);	/* clear ATA interrupt */
+		ap->ops->check_status(ap); /* clear ATA interrupt */
 		ata_port_printk(ap, KERN_WARNING, "unhandled "
 				"interrupt, irq_stat=%x\n", irq_stat);
 		return;
@@ -351,7 +351,7 @@ static unsigned int inic_qc_issue(struct ata_queued_cmd *qc)
 	 */
 	if (unlikely(qc->tf.command == ATA_CMD_ID_ATA ||
 		     qc->tf.command == ATA_CMD_ID_ATAPI)) {
-		u8 stat = ata_chk_status(ap);
+		u8 stat = ap->ops->check_status(ap);
 		if (stat == 0x7f || stat == 0xff)
 			return AC_ERR_HSM;
 	}
@@ -365,7 +365,7 @@ static void inic_freeze(struct ata_port *ap)
 
 	__inic_set_pirq_mask(ap, PIRQ_MASK_FREEZE);
 
-	ata_chk_status(ap);
+	ap->ops->check_status(ap);
 	writeb(0xff, port_base + PORT_IRQ_STAT);
 
 	readb(port_base + PORT_IRQ_STAT); /* flush */
@@ -375,7 +375,7 @@ static void inic_thaw(struct ata_port *ap)
 {
 	void __iomem *port_base = inic_port_base(ap);
 
-	ata_chk_status(ap);
+	ap->ops->check_status(ap);
 	writeb(0xff, port_base + PORT_IRQ_STAT);
 
 	__inic_set_pirq_mask(ap, PIRQ_MASK_OTHER);
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index eac7ca73cfa0..659dfcbdc1b2 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -369,7 +369,7 @@ static void sil_host_intr(struct ata_port *ap, u32 bmdma2)
 
 	if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) {
 		/* this sometimes happens, just clear IRQ */
-		ata_chk_status(ap);
+		ap->ops->check_status(ap);
 		return;
 	}
 
@@ -405,7 +405,7 @@ static void sil_host_intr(struct ata_port *ap, u32 bmdma2)
 	}
 
 	/* check main status, clearing INTRQ */
-	status = ata_chk_status(ap);
+	status = ap->ops->check_status(ap);
 	if (unlikely(status & ATA_BUSY))
 		goto err_hsm;
 
@@ -480,7 +480,7 @@ static void sil_thaw(struct ata_port *ap)
 	u32 tmp;
 
 	/* clear IRQ */
-	ata_chk_status(ap);
+	ap->ops->check_status(ap);
 	ata_bmdma_irq_clear(ap);
 
 	/* turn on SATA IRQ if supported */
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 402fd7333d48..4bc6e849af2c 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -173,7 +173,7 @@ static void svia_noop_freeze(struct ata_port *ap)
 	/* Some VIA controllers choke if ATA_NIEN is manipulated in
 	 * certain way.  Leave it alone and just clear pending IRQ.
 	 */
-	ata_chk_status(ap);
+	ap->ops->check_status(ap);
 	ata_bmdma_irq_clear(ap);
 }
 
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index 8045a72dc559..fb3a88722664 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -251,7 +251,7 @@ static void vsc_port_intr(u8 port_status, struct ata_port *ap)
 	 * simply clear the interrupt
 	 */
 	if (unlikely(!handled))
-		ata_chk_status(ap);
+		ap->ops->check_status(ap);
 }
 
 /*
-- 
cgit v1.2.2


From d9c74fbead08de13e3965e1c6ffe289f24f45479 Mon Sep 17 00:00:00 2001
From: Harvey Harrison <harvey.harrison@gmail.com>
Date: Fri, 28 Mar 2008 14:33:56 -0700
Subject: pata_amd: fix sparse warning

Current code is essentially choosing between dividing by 1 or
dividing by two, make the conditions a little more obvious.

As a bonus, removes a sparse error:
drivers/ata/pata_amd.c:59:11: warning: symbol '__x' shadows an earlier one
drivers/ata/pata_amd.c:59:11: originally declared here

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/pata_amd.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 09c8286b6890..33074c34105c 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -56,7 +56,9 @@ static void timing_setup(struct ata_port *ap, struct ata_device *adev, int offse
 	u8 t;
 
 	T = 1000000000 / amd_clock;
-	UT = T / min_t(int, max_t(int, clock, 1), 2);
+	UT = T;
+	if (clock >= 2)
+		UT = T / 2;
 
 	if (ata_timing_compute(adev, speed, &at, T, UT) < 0) {
 		dev_printk(KERN_ERR, &pdev->dev, "unknown mode %d.\n", speed);
-- 
cgit v1.2.2


From d21279f4125893c63ec285962e1f2164b4d71117 Mon Sep 17 00:00:00 2001
From: Zoltan Boszormenyi <zboszor@dunaweb.hu>
Date: Fri, 28 Mar 2008 14:33:46 -0700
Subject: ata: SWNCQ should be enabled by default

Signed-off-by: Zoltan Boszormenyi <zboszor@dunaweb.hu>
Cc: Robert Hancock <hancockr@shaw.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/sata_nv.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index b2eb5724cf85..8bb8ba1df62e 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -532,7 +532,7 @@ MODULE_DEVICE_TABLE(pci, nv_pci_tbl);
 MODULE_VERSION(DRV_VERSION);
 
 static int adma_enabled = 1;
-static int swncq_enabled;
+static int swncq_enabled = 1;
 
 static void nv_adma_register_mode(struct ata_port *ap)
 {
@@ -2485,5 +2485,5 @@ module_exit(nv_exit);
 module_param_named(adma, adma_enabled, bool, 0444);
 MODULE_PARM_DESC(adma, "Enable use of ADMA (Default: true)");
 module_param_named(swncq, swncq_enabled, bool, 0444);
-MODULE_PARM_DESC(swncq, "Enable use of SWNCQ (Default: false)");
+MODULE_PARM_DESC(swncq, "Enable use of SWNCQ (Default: true)");
 
-- 
cgit v1.2.2


From 15a5551c847c8787d6cd75b8cf7682cd6d642e1b Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Fri, 28 Mar 2008 14:33:46 -0700
Subject: libata: isolate and rework cable logic

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/libata-core.c | 48 +++++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 44 insertions(+), 4 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 54f85508bc6e..9121cc443be8 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3885,6 +3885,49 @@ static int ata_is_40wire(struct ata_device *dev)
 	return ata_drive_40wire(dev->id);
 }
 
+/**
+ *	cable_is_40wire		-	40/80/SATA decider
+ *	@ap: port to consider
+ *
+ *	This function encapsulates the policy for speed management
+ *	in one place. At the moment we don't cache the result but
+ *	there is a good case for setting ap->cbl to the result when
+ *	we are called with unknown cables (and figuring out if it
+ *	impacts hotplug at all).
+ *
+ *	Return 1 if the cable appears to be 40 wire.
+ */
+
+static int cable_is_40wire(struct ata_port *ap)
+{
+	struct ata_link *link;
+	struct ata_device *dev;
+
+	/* If the controller thinks we are 40 wire, we are */
+	if (ap->cbl == ATA_CBL_PATA40)
+		return 1;
+	/* If the controller thinks we are 80 wire, we are */
+	if (ap->cbl == ATA_CBL_PATA80 || ap->cbl == ATA_CBL_SATA)
+		return 0;
+	/* If the controller doesn't know we scan
+
+	   - Note: We look for all 40 wire detects at this point.
+	     Any 80 wire detect is taken to be 80 wire cable
+	     because
+	     - In many setups only the one drive (slave if present)
+               will give a valid detect
+             - If you have a non detect capable drive you don't
+               want it to colour the choice
+        */
+	ata_port_for_each_link(link, ap) {
+		ata_link_for_each_dev(dev, link) {
+			if (!ata_is_40wire(dev))
+				return 0;
+		}
+	}
+	return 1;
+}
+
 /**
  *	ata_dev_xfermask - Compute supported xfermask of the given device
  *	@dev: Device to compute xfermask for
@@ -3953,10 +3996,7 @@ static void ata_dev_xfermask(struct ata_device *dev)
 	 */
 	if (xfer_mask & (0xF8 << ATA_SHIFT_UDMA))
 		/* UDMA/44 or higher would be available */
-		if ((ap->cbl == ATA_CBL_PATA40) ||
-		    (ata_is_40wire(dev) &&
-		    (ap->cbl == ATA_CBL_PATA_UNK ||
-		     ap->cbl == ATA_CBL_PATA80))) {
+		if (cable_is_40wire(ap)) {
 			ata_dev_printk(dev, KERN_WARNING,
 				 "limited to UDMA/33 due to 40-wire cable\n");
 			xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA);
-- 
cgit v1.2.2


From c1796d9850aaa97ee7492d090499b5508971514b Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Thu, 27 Mar 2008 19:44:24 +0900
Subject: pata_scc: fix compile warning

Missed one during mass conversion (dc14c0c5).  Fix it.  Spotted by
Stephen Rothwell.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/pata_scc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index 85d33637dff9..2ed480ef0ff8 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -960,7 +960,7 @@ static struct scsi_host_template scc_sht = {
 	ATA_BMDMA_SHT(DRV_NAME),
 };
 
-static const struct ata_port_operations scc_pata_ops = {
+static struct ata_port_operations scc_pata_ops = {
 	.inherits		= &ata_bmdma_port_ops,
 
 	.set_piomode		= scc_set_piomode,
-- 
cgit v1.2.2


From 5016d7d212dbcc85cdc5130b1228d23f3423bd61 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Wed, 26 Mar 2008 15:46:58 +0900
Subject: ata_piix: don't attach to ICH6M in ahci mode

ata_piix when attached to ICH6M in AHCI mode doesn't provide any
benefit over using ahci and has detection problems.  Don't let
ata_piix claim ICH6M if it's in AHCI mode.

This change makes ICH6R the only one which ata_piix can attach to even
when it's in ahci mode which is necessary as some devices don't work
properly under ahci mode.  Drop PIIX_FLAG_AHCI and match the
controller directly so that piix_disable_ahci() is called only for it.

This change makes PIIX_SCC no longer used and it gets dropped too.

This fixes bz 9491.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Robert M. Albrecht <romal@gmx.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/ata_piix.c | 43 ++++++++++++++++++++-----------------------
 1 file changed, 20 insertions(+), 23 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index eafb984313f6..e6bf4fd51794 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -100,13 +100,11 @@ enum {
 	PIIX_IOCFG		= 0x54, /* IDE I/O configuration register */
 	ICH5_PMR		= 0x90, /* port mapping register */
 	ICH5_PCS		= 0x92,	/* port control and status */
-	PIIX_SCC		= 0x0A, /* sub-class code register */
 	PIIX_SIDPR_BAR		= 5,
 	PIIX_SIDPR_LEN		= 16,
 	PIIX_SIDPR_IDX		= 0,
 	PIIX_SIDPR_DATA		= 4,
 
-	PIIX_FLAG_AHCI		= (1 << 27), /* AHCI possible */
 	PIIX_FLAG_CHECKINTR	= (1 << 28), /* make sure PCI INTx enabled */
 	PIIX_FLAG_SIDPR		= (1 << 29), /* SATA idx/data pair regs */
 
@@ -238,8 +236,10 @@ static const struct pci_device_id piix_pci_tbl[] = {
 	{ 0x8086, 0x2651, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata },
 	/* 82801FR/FRW (ICH6R/ICH6RW) */
 	{ 0x8086, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
-	/* 82801FBM ICH6M (ICH6R with only port 0 and 2 implemented) */
-	{ 0x8086, 0x2653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci },
+	/* 82801FBM ICH6M (ICH6R with only port 0 and 2 implemented).
+	 * Attach iff the controller is in IDE mode. */
+	{ 0x8086, 0x2653, PCI_ANY_ID, PCI_ANY_ID,
+	  PCI_CLASS_STORAGE_IDE << 8, 0xffff00, ich6m_sata_ahci },
 	/* 82801GB/GR/GH (ICH7, identical to ICH6) */
 	{ 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
 	/* 2801GBM/GHM (ICH7M, identical to ICH6M) */
@@ -494,7 +494,7 @@ static struct ata_port_info piix_port_info[] = {
 
 	[ich6_sata_ahci] =
 	{
-		.flags		= PIIX_SATA_FLAGS | PIIX_FLAG_AHCI,
+		.flags		= PIIX_SATA_FLAGS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
 		.udma_mask	= ATA_UDMA6,
@@ -503,7 +503,7 @@ static struct ata_port_info piix_port_info[] = {
 
 	[ich6m_sata_ahci] =
 	{
-		.flags		= PIIX_SATA_FLAGS | PIIX_FLAG_AHCI,
+		.flags		= PIIX_SATA_FLAGS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
 		.udma_mask	= ATA_UDMA6,
@@ -512,8 +512,7 @@ static struct ata_port_info piix_port_info[] = {
 
 	[ich8_sata_ahci] =
 	{
-		.flags		= PIIX_SATA_FLAGS | PIIX_FLAG_AHCI |
-				  PIIX_FLAG_SIDPR,
+		.flags		= PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
 		.udma_mask	= ATA_UDMA6,
@@ -522,8 +521,7 @@ static struct ata_port_info piix_port_info[] = {
 
 	[ich8_2port_sata] =
 	{
-		.flags		= PIIX_SATA_FLAGS | PIIX_FLAG_AHCI |
-				  PIIX_FLAG_SIDPR,
+		.flags		= PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
 		.udma_mask	= ATA_UDMA6,
@@ -532,7 +530,7 @@ static struct ata_port_info piix_port_info[] = {
 
 	[tolapai_sata_ahci] =
 	{
-		.flags		= PIIX_SATA_FLAGS | PIIX_FLAG_AHCI,
+		.flags		= PIIX_SATA_FLAGS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
 		.udma_mask	= ATA_UDMA6,
@@ -541,8 +539,7 @@ static struct ata_port_info piix_port_info[] = {
 
 	[ich8m_apple_sata_ahci] =
 	{
-		.flags		= PIIX_SATA_FLAGS | PIIX_FLAG_AHCI |
-				  PIIX_FLAG_SIDPR,
+		.flags		= PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
 		.udma_mask	= ATA_UDMA6,
@@ -1488,6 +1485,16 @@ static int __devinit piix_init_one(struct pci_dev *pdev,
 	if (rc)
 		return rc;
 
+	/* ICH6R may be driven by either ata_piix or ahci driver
+	 * regardless of BIOS configuration.  Make sure AHCI mode is
+	 * off.
+	 */
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == 0x2652) {
+		int rc = piix_disable_ahci(pdev);
+		if (rc)
+			return rc;
+	}
+
 	/* SATA map init can change port_info, do it before prepping host */
 	hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
 	if (!hpriv)
@@ -1503,16 +1510,6 @@ static int __devinit piix_init_one(struct pci_dev *pdev,
 	host->private_data = hpriv;
 
 	/* initialize controller */
-	if (port_flags & PIIX_FLAG_AHCI) {
-		u8 tmp;
-		pci_read_config_byte(pdev, PIIX_SCC, &tmp);
-		if (tmp == PIIX_AHCI_DEVICE) {
-			rc = piix_disable_ahci(pdev);
-			if (rc)
-				return rc;
-		}
-	}
-
 	if (port_flags & ATA_FLAG_SATA) {
 		piix_init_pcs(host, piix_map_db_table[ent->driver_data]);
 		piix_init_sidpr(host);
-- 
cgit v1.2.2


From 9c0bf675054883acd10dec99c0c854514e139f06 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Wed, 26 Mar 2008 16:00:58 +0900
Subject: ata_piix: kill ich6_sata_ahci and clean up

ich6_sata_ahci and ich6_sata are identical.  Kill ich6_sata_ahci and
drop _ahci postfixes from controller ids, which doesn't really mean
anything at this point.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/ata_piix.c | 61 +++++++++++++++++++++-----------------------------
 1 file changed, 25 insertions(+), 36 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index e6bf4fd51794..e113f2f80275 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -138,12 +138,11 @@ enum piix_controller_ids {
 	ich_pata_100,		/* ICH up to UDMA 100 */
 	ich5_sata,
 	ich6_sata,
-	ich6_sata_ahci,
-	ich6m_sata_ahci,
-	ich8_sata_ahci,
+	ich6m_sata,
+	ich8_sata,
 	ich8_2port_sata,
-	ich8m_apple_sata_ahci,	/* locks up on second port enable */
-	tolapai_sata_ahci,
+	ich8m_apple_sata,	/* locks up on second port enable */
+	tolapai_sata,
 	piix_pata_vmw,			/* PIIX4 for VMware, spurious DMA_ERR */
 };
 
@@ -235,27 +234,27 @@ static const struct pci_device_id piix_pci_tbl[] = {
 	/* 82801FB/FW (ICH6/ICH6W) */
 	{ 0x8086, 0x2651, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata },
 	/* 82801FR/FRW (ICH6R/ICH6RW) */
-	{ 0x8086, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
+	{ 0x8086, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata },
 	/* 82801FBM ICH6M (ICH6R with only port 0 and 2 implemented).
 	 * Attach iff the controller is in IDE mode. */
 	{ 0x8086, 0x2653, PCI_ANY_ID, PCI_ANY_ID,
-	  PCI_CLASS_STORAGE_IDE << 8, 0xffff00, ich6m_sata_ahci },
+	  PCI_CLASS_STORAGE_IDE << 8, 0xffff00, ich6m_sata },
 	/* 82801GB/GR/GH (ICH7, identical to ICH6) */
-	{ 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
+	{ 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata },
 	/* 2801GBM/GHM (ICH7M, identical to ICH6M) */
-	{ 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci },
+	{ 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata },
 	/* Enterprise Southbridge 2 (631xESB/632xESB) */
-	{ 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
+	{ 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata },
 	/* SATA Controller 1 IDE (ICH8) */
-	{ 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+	{ 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
 	/* SATA Controller 2 IDE (ICH8) */
 	{ 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 	/* Mobile SATA Controller IDE (ICH8M) */
-	{ 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+	{ 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
 	/* Mobile SATA Controller IDE (ICH8M), Apple */
-	{ 0x8086, 0x2828, 0x106b, 0x00a0, 0, 0, ich8m_apple_sata_ahci },
+	{ 0x8086, 0x2828, 0x106b, 0x00a0, 0, 0, ich8m_apple_sata },
 	/* SATA Controller IDE (ICH9) */
-	{ 0x8086, 0x2920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+	{ 0x8086, 0x2920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
 	/* SATA Controller IDE (ICH9) */
 	{ 0x8086, 0x2921, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 	/* SATA Controller IDE (ICH9) */
@@ -265,15 +264,15 @@ static const struct pci_device_id piix_pci_tbl[] = {
 	/* SATA Controller IDE (ICH9M) */
 	{ 0x8086, 0x292d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 	/* SATA Controller IDE (ICH9M) */
-	{ 0x8086, 0x292e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+	{ 0x8086, 0x292e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
 	/* SATA Controller IDE (Tolapai) */
-	{ 0x8086, 0x5028, PCI_ANY_ID, PCI_ANY_ID, 0, 0, tolapai_sata_ahci },
+	{ 0x8086, 0x5028, PCI_ANY_ID, PCI_ANY_ID, 0, 0, tolapai_sata },
 	/* SATA Controller IDE (ICH10) */
-	{ 0x8086, 0x3a00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+	{ 0x8086, 0x3a00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
 	/* SATA Controller IDE (ICH10) */
 	{ 0x8086, 0x3a06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 	/* SATA Controller IDE (ICH10) */
-	{ 0x8086, 0x3a20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+	{ 0x8086, 0x3a20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
 	/* SATA Controller IDE (ICH10) */
 	{ 0x8086, 0x3a26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 
@@ -421,12 +420,11 @@ static const struct piix_map_db tolapai_map_db = {
 static const struct piix_map_db *piix_map_db_table[] = {
 	[ich5_sata]		= &ich5_map_db,
 	[ich6_sata]		= &ich6_map_db,
-	[ich6_sata_ahci]	= &ich6_map_db,
-	[ich6m_sata_ahci]	= &ich6m_map_db,
-	[ich8_sata_ahci]	= &ich8_map_db,
+	[ich6m_sata]		= &ich6m_map_db,
+	[ich8_sata]		= &ich8_map_db,
 	[ich8_2port_sata]	= &ich8_2port_map_db,
-	[ich8m_apple_sata_ahci]	= &ich8m_apple_map_db,
-	[tolapai_sata_ahci]	= &tolapai_map_db,
+	[ich8m_apple_sata]	= &ich8m_apple_map_db,
+	[tolapai_sata]		= &tolapai_map_db,
 };
 
 static struct ata_port_info piix_port_info[] = {
@@ -492,7 +490,7 @@ static struct ata_port_info piix_port_info[] = {
 		.port_ops	= &piix_sata_ops,
 	},
 
-	[ich6_sata_ahci] =
+	[ich6m_sata] =
 	{
 		.flags		= PIIX_SATA_FLAGS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
@@ -501,16 +499,7 @@ static struct ata_port_info piix_port_info[] = {
 		.port_ops	= &piix_sata_ops,
 	},
 
-	[ich6m_sata_ahci] =
-	{
-		.flags		= PIIX_SATA_FLAGS,
-		.pio_mask	= 0x1f,	/* pio0-4 */
-		.mwdma_mask	= 0x07, /* mwdma0-2 */
-		.udma_mask	= ATA_UDMA6,
-		.port_ops	= &piix_sata_ops,
-	},
-
-	[ich8_sata_ahci] =
+	[ich8_sata] =
 	{
 		.flags		= PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR,
 		.pio_mask	= 0x1f,	/* pio0-4 */
@@ -528,7 +517,7 @@ static struct ata_port_info piix_port_info[] = {
 		.port_ops	= &piix_sata_ops,
 	},
 
-	[tolapai_sata_ahci] =
+	[tolapai_sata] =
 	{
 		.flags		= PIIX_SATA_FLAGS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
@@ -537,7 +526,7 @@ static struct ata_port_info piix_port_info[] = {
 		.port_ops	= &piix_sata_ops,
 	},
 
-	[ich8m_apple_sata_ahci] =
+	[ich8m_apple_sata] =
 	{
 		.flags		= PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR,
 		.pio_mask	= 0x1f,	/* pio0-4 */
-- 
cgit v1.2.2


From 826cd156de6cea1e4982f32238077215cfa4ae63 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@ftp.linux.org.uk>
Date: Tue, 25 Mar 2008 05:18:11 +0000
Subject: libata annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/pata_scc.c     | 12 ++++++------
 drivers/ata/sata_promise.c |  2 +-
 drivers/ata/sata_sx4.c     |  2 +-
 3 files changed, 8 insertions(+), 8 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index 2ed480ef0ff8..fba5bed0a641 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -782,28 +782,28 @@ static unsigned int scc_data_xfer (struct ata_device *dev, unsigned char *buf,
 	struct ata_port *ap = dev->link->ap;
 	unsigned int words = buflen >> 1;
 	unsigned int i;
-	u16 *buf16 = (u16 *) buf;
+	__le16 *buf16 = (__le16 *) buf;
 	void __iomem *mmio = ap->ioaddr.data_addr;
 
 	/* Transfer multiple of 2 bytes */
 	if (rw == READ)
 		for (i = 0; i < words; i++)
-			buf16[i] = le16_to_cpu(in_be32(mmio));
+			buf16[i] = cpu_to_le16(in_be32(mmio));
 	else
 		for (i = 0; i < words; i++)
-			out_be32(mmio, cpu_to_le16(buf16[i]));
+			out_be32(mmio, le16_to_cpu(buf16[i]));
 
 	/* Transfer trailing 1 byte, if any. */
 	if (unlikely(buflen & 0x01)) {
-		u16 align_buf[1] = { 0 };
+		__le16 align_buf[1] = { 0 };
 		unsigned char *trailing_buf = buf + buflen - 1;
 
 		if (rw == READ) {
-			align_buf[0] = le16_to_cpu(in_be32(mmio));
+			align_buf[0] = cpu_to_le16(in_be32(mmio));
 			memcpy(trailing_buf, align_buf, 1);
 		} else {
 			memcpy(align_buf, trailing_buf, 1);
-			out_be32(mmio, cpu_to_le16(align_buf[0]));
+			out_be32(mmio, le16_to_cpu(align_buf[0]));
 		}
 		words++;
 	}
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index 91659dc15caf..5a0a03a08abc 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -405,7 +405,7 @@ static void pdc_atapi_pkt(struct ata_queued_cmd *qc)
 	u8 *cdb = qc->cdb;
 	struct pdc_port_priv *pp = ap->private_data;
 	u8 *buf = pp->pkt;
-	u32 *buf32 = (u32 *) buf;
+	__le32 *buf32 = (__le32 *) buf;
 	unsigned int dev_sel, feature;
 
 	/* set control bits (byte 0), zero delay seq id (byte 3),
diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index 8138cda86a66..8d7f39532d4a 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -464,7 +464,7 @@ static void pdc20621_dma_prep(struct ata_queued_cmd *qc)
 	void __iomem *dimm_mmio = ap->host->iomap[PDC_DIMM_BAR];
 	unsigned int portno = ap->port_no;
 	unsigned int i, si, idx, total_len = 0, sgt_len;
-	u32 *buf = (u32 *) &pp->dimm_buf[PDC_DIMM_HEADER_SZ];
+	__le32 *buf = (__le32 *) &pp->dimm_buf[PDC_DIMM_HEADER_SZ];
 
 	WARN_ON(!(qc->flags & ATA_QCFLAG_DMAMAP));
 
-- 
cgit v1.2.2


From 06993d2237da45615b5a9a4dde3f344ce97ca17d Mon Sep 17 00:00:00 2001
From: Jeff Garzik <jeff@garzik.org>
Date: Fri, 4 Apr 2008 03:34:45 -0400
Subject: [libata] sata_nv: disable ADMA by default

Continues to have open issues, and engineering support is extremely difficult
to come by, according to fellow NVIDIA engineers.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/sata_nv.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 8bb8ba1df62e..95fd0cd28b49 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -531,7 +531,7 @@ MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, nv_pci_tbl);
 MODULE_VERSION(DRV_VERSION);
 
-static int adma_enabled = 1;
+static int adma_enabled;
 static int swncq_enabled = 1;
 
 static void nv_adma_register_mode(struct ata_port *ap)
-- 
cgit v1.2.2


From a5987e0a1b569146ed9cfa0a8c275a21b344fcaa Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Thu, 27 Mar 2008 19:14:23 +0900
Subject: libata: make ata_tf_to_lba[48]() generic

ata_tf_to_lba[48]() currently return LBA in tf + 1 for
ata_read_native_max_address().  Make them return LBA and make it
global so that it can be used to read LBA off TF for other purposes.
ata_read_native_max_address() now adds 1 itself.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/libata-core.c | 12 ++++++------
 drivers/ata/libata.h      |  2 ++
 2 files changed, 8 insertions(+), 6 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 9121cc443be8..4d78f5debb6c 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1211,7 +1211,7 @@ static u64 ata_id_n_sectors(const u16 *id)
 	}
 }
 
-static u64 ata_tf_to_lba48(struct ata_taskfile *tf)
+u64 ata_tf_to_lba48(const struct ata_taskfile *tf)
 {
 	u64 sectors = 0;
 
@@ -1222,10 +1222,10 @@ static u64 ata_tf_to_lba48(struct ata_taskfile *tf)
 	sectors |= (tf->lbam & 0xff) << 8;
 	sectors |= (tf->lbal & 0xff);
 
-	return ++sectors;
+	return sectors;
 }
 
-static u64 ata_tf_to_lba(struct ata_taskfile *tf)
+u64 ata_tf_to_lba(const struct ata_taskfile *tf)
 {
 	u64 sectors = 0;
 
@@ -1234,7 +1234,7 @@ static u64 ata_tf_to_lba(struct ata_taskfile *tf)
 	sectors |= (tf->lbam & 0xff) << 8;
 	sectors |= (tf->lbal & 0xff);
 
-	return ++sectors;
+	return sectors;
 }
 
 /**
@@ -1279,9 +1279,9 @@ static int ata_read_native_max_address(struct ata_device *dev, u64 *max_sectors)
 	}
 
 	if (lba48)
-		*max_sectors = ata_tf_to_lba48(&tf);
+		*max_sectors = ata_tf_to_lba48(&tf) + 1;
 	else
-		*max_sectors = ata_tf_to_lba(&tf);
+		*max_sectors = ata_tf_to_lba(&tf) + 1;
 	if (dev->horkage & ATA_HORKAGE_HPA_SIZE)
 		(*max_sectors)--;
 	return 0;
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index a69f663c7402..5e8d0359bccb 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -61,6 +61,8 @@ extern int libata_fua;
 extern int libata_noacpi;
 extern int libata_allow_tpm;
 extern void ata_force_cbl(struct ata_port *ap);
+extern u64 ata_tf_to_lba(const struct ata_taskfile *tf);
+extern u64 ata_tf_to_lba48(const struct ata_taskfile *tf);
 extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev);
 extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
 			   u64 block, u32 n_block, unsigned int tf_flags,
-- 
cgit v1.2.2


From 03faab7827e4e45823fd27c47b84c133e20a0cd0 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Thu, 27 Mar 2008 19:14:24 +0900
Subject: libata: implement ATA_QCFLAG_RETRY

Currently whether a command should be retried after failure is
determined inside ata_eh_finish().  Add ATA_QCFLAG_RETRY and move the
logic into ata_eh_autopsy().  This makes things clearer and helps
extending retry determination logic.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/libata-eh.c | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index ec32082356cb..cc8548e1572a 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1785,6 +1785,11 @@ static void ata_eh_link_autopsy(struct ata_link *link)
 		if (qc->flags & ATA_QCFLAG_SENSE_VALID)
 			qc->err_mask &= ~(AC_ERR_DEV | AC_ERR_OTHER);
 
+		/* determine whether the command is worth retrying */
+		if (!(qc->err_mask & AC_ERR_INVALID) &&
+		    ((qc->flags & ATA_QCFLAG_IO) || qc->err_mask != AC_ERR_DEV))
+			qc->flags |= ATA_QCFLAG_RETRY;
+
 		/* accumulate error info */
 		ehc->i.dev = qc->dev;
 		all_err_mask |= qc->err_mask;
@@ -2783,18 +2788,11 @@ void ata_eh_finish(struct ata_port *ap)
 			/* FIXME: Once EH migration is complete,
 			 * generate sense data in this function,
 			 * considering both err_mask and tf.
-			 *
-			 * There's no point in retrying invalid
-			 * (detected by libata) and non-IO device
-			 * errors (rejected by device).  Finish them
-			 * immediately.
 			 */
-			if ((qc->err_mask & AC_ERR_INVALID) ||
-			    (!(qc->flags & ATA_QCFLAG_IO) &&
-			     qc->err_mask == AC_ERR_DEV))
-				ata_eh_qc_complete(qc);
-			else
+			if (qc->flags & ATA_QCFLAG_RETRY)
 				ata_eh_qc_retry(qc);
+			else
+				ata_eh_qc_complete(qc);
 		} else {
 			if (qc->flags & ATA_QCFLAG_SENSE_VALID) {
 				ata_eh_qc_complete(qc);
-- 
cgit v1.2.2


From d8b81b8008a0f131e01bb6eb5c681c900c327e2b Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Thu, 27 Mar 2008 19:14:25 +0900
Subject: libata: kill unused ata_flush_cache()

ata_flush_code() hasn't been in use for quite some time now.  Kill it.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/libata-core.c | 26 --------------------------
 drivers/ata/libata.h      |  1 -
 2 files changed, 27 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 4d78f5debb6c..fa205d7c5bea 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4800,32 +4800,6 @@ int ata_link_offline(struct ata_link *link)
 	return 0;
 }
 
-int ata_flush_cache(struct ata_device *dev)
-{
-	unsigned int err_mask;
-	u8 cmd;
-
-	if (!ata_try_flush_cache(dev))
-		return 0;
-
-	if (dev->flags & ATA_DFLAG_FLUSH_EXT)
-		cmd = ATA_CMD_FLUSH_EXT;
-	else
-		cmd = ATA_CMD_FLUSH;
-
-	/* This is wrong. On a failed flush we get back the LBA of the lost
-	   sector and we should (assuming it wasn't aborted as unknown) issue
-	   a further flush command to continue the writeback until it
-	   does not error */
-	err_mask = ata_do_simple_cmd(dev, cmd);
-	if (err_mask) {
-		ata_dev_printk(dev, KERN_ERR, "failed to flush cache\n");
-		return -EIO;
-	}
-
-	return 0;
-}
-
 #ifdef CONFIG_PM
 static int ata_host_request_pm(struct ata_host *host, pm_message_t mesg,
 			       unsigned int action, unsigned int ehi_flags,
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 5e8d0359bccb..11b5f67a19d4 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -96,7 +96,6 @@ extern void ata_qc_issue(struct ata_queued_cmd *qc);
 extern void __ata_qc_complete(struct ata_queued_cmd *qc);
 extern int ata_check_atapi_dma(struct ata_queued_cmd *qc);
 extern void swap_buf_le16(u16 *buf, unsigned int buf_words);
-extern int ata_flush_cache(struct ata_device *dev);
 extern void ata_dev_init(struct ata_device *dev);
 extern void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp);
 extern int sata_link_init_spd(struct ata_link *link);
-- 
cgit v1.2.2


From ed82f96425e744dffe62115e46f08eb785c0b2f3 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Tue, 25 Mar 2008 21:34:39 +0900
Subject: libata/pdc_adma: make SFF EH handle non-bmdma SFF drivers and
 standardize pdc_adma ops

pdc_adma has interface similar to SFF but has its own DMA interface.
It currently implements noop bmdma ops to avoid crashing
ata_bmdma_error_handler() which BTW actually is EH for SFF drivers.

This patch makes ata_bmdma_error_handler() dereference bmdma ops iff
bmdma_addr is initialized as done in ata_bmdma_post_internal_cmd.
This change allows pdc_adma to standardize ops and use SFF
error_handler and post_internal_cmd.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Mark Lord <liml@rtr.ca>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/libata-sff.c |  3 ++-
 drivers/ata/pdc_adma.c   | 16 ++--------------
 2 files changed, 4 insertions(+), 15 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index c601dcef2925..5208ca21f634 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -2014,7 +2014,8 @@ void ata_bmdma_error_handler(struct ata_port *ap)
 
 	ap->hsm_task_state = HSM_ST_IDLE;
 
-	if (qc && (qc->tf.protocol == ATA_PROT_DMA ||
+	if (ap->ioaddr.bmdma_addr &&
+	    qc && (qc->tf.protocol == ATA_PROT_DMA ||
 		   qc->tf.protocol == ATAPI_PROT_DMA)) {
 		u8 host_stat;
 
diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c
index 5ed065d0ab4c..577a0e556f7a 100644
--- a/drivers/ata/pdc_adma.c
+++ b/drivers/ata/pdc_adma.c
@@ -136,8 +136,6 @@ static void adma_port_stop(struct ata_port *ap);
 static void adma_qc_prep(struct ata_queued_cmd *qc);
 static unsigned int adma_qc_issue(struct ata_queued_cmd *qc);
 static int adma_check_atapi_dma(struct ata_queued_cmd *qc);
-static void adma_bmdma_stop(struct ata_queued_cmd *qc);
-static u8 adma_bmdma_status(struct ata_port *ap);
 static void adma_freeze(struct ata_port *ap);
 static void adma_thaw(struct ata_port *ap);
 static int adma_prereset(struct ata_link *link, unsigned long deadline);
@@ -158,8 +156,6 @@ static struct ata_port_operations adma_ata_ops = {
 	.exec_command		= ata_exec_command,
 	.data_xfer		= ata_data_xfer,
 	.check_atapi_dma	= adma_check_atapi_dma,
-	.bmdma_stop		= adma_bmdma_stop,
-	.bmdma_status		= adma_bmdma_status,
 	.qc_prep		= adma_qc_prep,
 	.qc_issue		= adma_qc_issue,
 	.irq_on			= ata_irq_on,
@@ -168,6 +164,8 @@ static struct ata_port_operations adma_ata_ops = {
 	.thaw			= adma_thaw,
 	.prereset		= adma_prereset,
 	.softreset		= ata_std_softreset,
+	.error_handler		= ata_bmdma_error_handler,
+	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
 
 	.port_start		= adma_port_start,
 	.port_stop		= adma_port_stop,
@@ -204,16 +202,6 @@ static int adma_check_atapi_dma(struct ata_queued_cmd *qc)
 	return 1;	/* ATAPI DMA not yet supported */
 }
 
-static void adma_bmdma_stop(struct ata_queued_cmd *qc)
-{
-	/* nothing */
-}
-
-static u8 adma_bmdma_status(struct ata_port *ap)
-{
-	return 0;
-}
-
 static void adma_reset_engine(struct ata_port *ap)
 {
 	void __iomem *chan = ADMA_PORT_REGS(ap);
-- 
cgit v1.2.2


From b0316b15ace0570c87b74c81f1296cf7bf8d459e Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Tue, 25 Mar 2008 21:35:30 +0900
Subject: pdc_adma: inherit ata_sff_port_ops

With the previous ops standardization, pdc_adma now can inherit
ata_sff_port_ops instead of ata_base_port_ops.  Make the change.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Mark Lord <liml@rtr.ca>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/pdc_adma.c | 14 ++------------
 1 file changed, 2 insertions(+), 12 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c
index 577a0e556f7a..6a4654e309a5 100644
--- a/drivers/ata/pdc_adma.c
+++ b/drivers/ata/pdc_adma.c
@@ -147,25 +147,15 @@ static struct scsi_host_template adma_ata_sht = {
 };
 
 static struct ata_port_operations adma_ata_ops = {
-	.inherits		= &ata_base_port_ops,
-
-	.dev_select		= ata_std_dev_select,
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.data_xfer		= ata_data_xfer,
+	.inherits		= &ata_sff_port_ops,
+
 	.check_atapi_dma	= adma_check_atapi_dma,
 	.qc_prep		= adma_qc_prep,
 	.qc_issue		= adma_qc_issue,
-	.irq_on			= ata_irq_on,
 
 	.freeze			= adma_freeze,
 	.thaw			= adma_thaw,
 	.prereset		= adma_prereset,
-	.softreset		= ata_std_softreset,
-	.error_handler		= ata_bmdma_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
 
 	.port_start		= adma_port_start,
 	.port_stop		= adma_port_stop,
-- 
cgit v1.2.2


From fc4712d12e332a46f200b9ba641855182df282c0 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Tue, 25 Mar 2008 21:36:06 +0900
Subject: pdc_adma: kill adma_host_stop()

adma_host_stop() does the same thing that adma_port_stop() does.  Kill
it.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Mark Lord <liml@rtr.ca>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/pdc_adma.c | 10 ----------
 1 file changed, 10 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c
index 6a4654e309a5..c431bf36f9ba 100644
--- a/drivers/ata/pdc_adma.c
+++ b/drivers/ata/pdc_adma.c
@@ -131,7 +131,6 @@ struct adma_port_priv {
 static int adma_ata_init_one(struct pci_dev *pdev,
 				const struct pci_device_id *ent);
 static int adma_port_start(struct ata_port *ap);
-static void adma_host_stop(struct ata_host *host);
 static void adma_port_stop(struct ata_port *ap);
 static void adma_qc_prep(struct ata_queued_cmd *qc);
 static unsigned int adma_qc_issue(struct ata_queued_cmd *qc);
@@ -159,7 +158,6 @@ static struct ata_port_operations adma_ata_ops = {
 
 	.port_start		= adma_port_start,
 	.port_stop		= adma_port_stop,
-	.host_stop		= adma_host_stop,
 };
 
 static struct ata_port_info adma_port_info[] = {
@@ -591,14 +589,6 @@ static void adma_port_stop(struct ata_port *ap)
 	adma_reset_engine(ap);
 }
 
-static void adma_host_stop(struct ata_host *host)
-{
-	unsigned int port_no;
-
-	for (port_no = 0; port_no < ADMA_PORTS; ++port_no)
-		adma_reset_engine(host->ports[port_no]);
-}
-
 static void adma_host_init(struct ata_host *host, unsigned int chip_id)
 {
 	unsigned int port_no;
-- 
cgit v1.2.2


From c30484d775eb0b899f2b6a8f5508a99ecaba59fc Mon Sep 17 00:00:00 2001
From: Chris Wedgwood <cw@f00f.org>
Date: Tue, 18 Mar 2008 15:06:48 -0700
Subject: Add 'short help text' to ATA_ACPI so it's [de]selectable.

ATA_ACPI isn't selectable right now because it lacks 'short help
text'.  This means it's always enabled and always enables ACPI_DOCK.
Add text so it's now [de]selectable.

cc: Jeff Garzik <jeff@garzik.org>
cc: Tejun Heo <htejun@gmail.com>
cc: Len Brown <len.brown@intel.com>
Signed-off-by: Chris Wedgwood <cw@f00f.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 25aba69b59b4..ea665c249035 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -28,7 +28,7 @@ config ATA_NONSTANDARD
        default n
 
 config ATA_ACPI
-	bool
+	bool "ATA ACPI Support"
 	depends on ACPI && PCI
 	select ACPI_DOCK
 	default y
-- 
cgit v1.2.2


From e12bef50b7660cf7c19d1cd3eac381b9eff734d7 Mon Sep 17 00:00:00 2001
From: Mark Lord <liml@rtr.ca>
Date: Mon, 31 Mar 2008 19:33:56 -0400
Subject: sata_mv cosmetic fixes

Various cosmetic fixes in preparation for real code changes later on.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/sata_mv.c | 116 +++++++++++++++++++++++++-------------------------
 1 file changed, 59 insertions(+), 57 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 9a89390531b1..ee6ca97c4545 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -1,6 +1,7 @@
 /*
  * sata_mv.c - Marvell SATA support
  *
+ * Copyright 2008: Marvell Corporation, all rights reserved.
  * Copyright 2005: EMC Corporation, all rights reserved.
  * Copyright 2005 Red Hat, Inc.  All rights reserved.
  *
@@ -61,7 +62,6 @@
 
 */
 
-
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/pci.h>
@@ -131,7 +131,7 @@ enum {
 	MV_FLAG_DUAL_HC		= (1 << 30),  /* two SATA Host Controllers */
 	MV_FLAG_IRQ_COALESCE	= (1 << 29),  /* IRQ coalescing capability */
 	/* SoC integrated controllers, no PCI interface */
-	MV_FLAG_SOC = (1 << 28),
+	MV_FLAG_SOC		= (1 << 28),
 
 	MV_COMMON_FLAGS		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 				  ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI |
@@ -141,6 +141,7 @@ enum {
 	CRQB_FLAG_READ		= (1 << 0),
 	CRQB_TAG_SHIFT		= 1,
 	CRQB_IOID_SHIFT		= 6,	/* CRQB Gen-II/IIE IO Id shift */
+	CRQB_PMP_SHIFT		= 12,	/* CRQB Gen-II/IIE PMP shift */
 	CRQB_HOSTQ_SHIFT	= 17,	/* CRQB Gen-II/IIE HostQueTag shift */
 	CRQB_CMD_ADDR_SHIFT	= 8,
 	CRQB_CMD_CS		= (0x2 << 11),
@@ -199,7 +200,7 @@ enum {
 	TWSI_INT		= (1 << 24),
 	HC_MAIN_RSVD		= (0x7f << 25),	/* bits 31-25 */
 	HC_MAIN_RSVD_5		= (0x1fff << 19), /* bits 31-19 */
-	HC_MAIN_RSVD_SOC 	= (0x3fffffb << 6),     /* bits 31-9, 7-6 */
+	HC_MAIN_RSVD_SOC	= (0x3fffffb << 6),     /* bits 31-9, 7-6 */
 	HC_MAIN_MASKED_IRQS	= (TRAN_LO_DONE | TRAN_HI_DONE |
 				   PORTS_0_7_COAL_DONE | GPIO_INT | TWSI_INT |
 				   HC_MAIN_RSVD),
@@ -223,13 +224,18 @@ enum {
 	SATA_STATUS_OFS		= 0x300,  /* ctrl, err regs follow status */
 	SATA_ACTIVE_OFS		= 0x350,
 	SATA_FIS_IRQ_CAUSE_OFS	= 0x364,
+	LTMODE_OFS		= 0x30c,
 	PHY_MODE3		= 0x310,
 	PHY_MODE4		= 0x314,
 	PHY_MODE2		= 0x330,
+	SATA_IFCTL_OFS		= 0x344,
+	SATA_IFSTAT_OFS		= 0x34c,
+	VENDOR_UNIQUE_FIS_OFS	= 0x35c,
+	FIS_CFG_OFS		= 0x360,
 	MV5_PHY_MODE		= 0x74,
 	MV5_LT_MODE		= 0x30,
 	MV5_PHY_CTL		= 0x0C,
-	SATA_INTERFACE_CTL	= 0x050,
+	SATA_INTERFACE_CFG	= 0x050,
 
 	MV_M2_PREAMP_MASK	= 0x7e0,
 
@@ -240,6 +246,8 @@ enum {
 	EDMA_CFG_NCQ_GO_ON_ERR	= (1 << 14),	/* continue on error */
 	EDMA_CFG_RD_BRST_EXT	= (1 << 11),	/* read burst 512B */
 	EDMA_CFG_WR_BUFF_LEN	= (1 << 13),	/* write buffer 512B */
+	EDMA_CFG_EDMA_FBS	= (1 << 16),	/* EDMA FIS-Based Switching */
+	EDMA_CFG_FBS		= (1 << 26),	/* FIS-Based Switching */
 
 	EDMA_ERR_IRQ_CAUSE_OFS	= 0x8,
 	EDMA_ERR_IRQ_MASK_OFS	= 0xc,
@@ -298,6 +306,7 @@ enum {
 				  EDMA_ERR_LNK_DATA_RX |
 				  EDMA_ERR_LNK_DATA_TX |
 				  EDMA_ERR_TRANS_PROTO,
+
 	EDMA_EH_FREEZE_5	= EDMA_ERR_D_PAR |
 				  EDMA_ERR_PRD_PAR |
 				  EDMA_ERR_DEV_DCON |
@@ -344,7 +353,6 @@ enum {
 	/* Port private flags (pp_flags) */
 	MV_PP_FLAG_EDMA_EN	= (1 << 0),	/* is EDMA engine enabled? */
 	MV_PP_FLAG_NCQ_EN	= (1 << 1),	/* is EDMA set up for NCQ? */
-	MV_PP_FLAG_HAD_A_RESET	= (1 << 2),	/* 1st hard reset complete? */
 };
 
 #define IS_GEN_I(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_I)
@@ -506,11 +514,11 @@ static void mv_soc_reset_flash(struct mv_host_priv *hpriv,
 				      void __iomem *mmio);
 static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio);
 static void mv_reset_pci_bus(struct ata_host *host, void __iomem *mmio);
-static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio,
+static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio,
 			     unsigned int port_no);
-static void mv_edma_cfg(struct mv_port_priv *pp, struct mv_host_priv *hpriv,
-			void __iomem *port_mmio, int want_ncq);
-static int __mv_stop_dma(struct ata_port *ap);
+static int mv_stop_edma(struct ata_port *ap);
+static int mv_stop_edma_engine(struct ata_port *ap);
+static void mv_edma_cfg(struct ata_port *ap, int want_ncq);
 
 /* .sg_tablesize is (MV_MAX_SG_CT / 2) in the structures below
  * because we have to allow room for worst case splitting of
@@ -714,6 +722,14 @@ static inline void __iomem *mv_port_base(void __iomem *base, unsigned int port)
 		(mv_hardport_from_port(port) * MV_PORT_REG_SZ);
 }
 
+static void __iomem *mv5_phy_base(void __iomem *mmio, unsigned int port)
+{
+	void __iomem *hc_mmio = mv_hc_base_from_port(mmio, port);
+	unsigned long ofs = (mv_hardport_from_port(port) + 1) * 0x100UL;
+
+	return hc_mmio + ofs;
+}
+
 static inline void __iomem *mv_host_base(struct ata_host *host)
 {
 	struct mv_host_priv *hpriv = host->private_data;
@@ -789,7 +805,7 @@ static void mv_start_dma(struct ata_port *ap, void __iomem *port_mmio,
 	if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
 		int using_ncq = ((pp->pp_flags & MV_PP_FLAG_NCQ_EN) != 0);
 		if (want_ncq != using_ncq)
-			__mv_stop_dma(ap);
+			mv_stop_edma_engine(ap);
 	}
 	if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN)) {
 		struct mv_host_priv *hpriv = ap->host->private_data;
@@ -810,7 +826,7 @@ static void mv_start_dma(struct ata_port *ap, void __iomem *port_mmio,
 				 hc_mmio + HC_IRQ_CAUSE_OFS);
 		}
 
-		mv_edma_cfg(pp, hpriv, port_mmio, want_ncq);
+		mv_edma_cfg(ap, want_ncq);
 
 		/* clear FIS IRQ Cause */
 		writelfl(0, port_mmio + SATA_FIS_IRQ_CAUSE_OFS);
@@ -824,7 +840,7 @@ static void mv_start_dma(struct ata_port *ap, void __iomem *port_mmio,
 }
 
 /**
- *      __mv_stop_dma - Disable eDMA engine
+ *      mv_stop_edma_engine - Disable eDMA engine
  *      @ap: ATA channel to manipulate
  *
  *      Verify the local cache of the eDMA state is accurate with a
@@ -833,7 +849,7 @@ static void mv_start_dma(struct ata_port *ap, void __iomem *port_mmio,
  *      LOCKING:
  *      Inherited from caller.
  */
-static int __mv_stop_dma(struct ata_port *ap)
+static int mv_stop_edma_engine(struct ata_port *ap)
 {
 	void __iomem *port_mmio = mv_ap_base(ap);
 	struct mv_port_priv *pp	= ap->private_data;
@@ -866,13 +882,13 @@ static int __mv_stop_dma(struct ata_port *ap)
 	return err;
 }
 
-static int mv_stop_dma(struct ata_port *ap)
+static int mv_stop_edma(struct ata_port *ap)
 {
 	unsigned long flags;
 	int rc;
 
 	spin_lock_irqsave(&ap->host->lock, flags);
-	rc = __mv_stop_dma(ap);
+	rc = mv_stop_edma_engine(ap);
 	spin_unlock_irqrestore(&ap->host->lock, flags);
 
 	return rc;
@@ -1007,10 +1023,12 @@ static void mv6_dev_config(struct ata_device *adev)
 			adev->max_sectors = ATA_MAX_SECTORS;
 }
 
-static void mv_edma_cfg(struct mv_port_priv *pp, struct mv_host_priv *hpriv,
-			void __iomem *port_mmio, int want_ncq)
+static void mv_edma_cfg(struct ata_port *ap, int want_ncq)
 {
 	u32 cfg;
+	struct mv_port_priv *pp    = ap->private_data;
+	struct mv_host_priv *hpriv = ap->host->private_data;
+	void __iomem *port_mmio    = mv_ap_base(ap);
 
 	/* set up non-NCQ EDMA configuration */
 	cfg = EDMA_CFG_Q_DEPTH;		/* always 0x1f for *all* chips */
@@ -1118,7 +1136,7 @@ static int mv_port_start(struct ata_port *ap)
 
 	spin_lock_irqsave(&ap->host->lock, flags);
 
-	mv_edma_cfg(pp, hpriv, port_mmio, 0);
+	mv_edma_cfg(ap, 0);
 	mv_set_edma_ptrs(port_mmio, hpriv, pp);
 
 	spin_unlock_irqrestore(&ap->host->lock, flags);
@@ -1145,7 +1163,7 @@ out_port_free_dma_mem:
  */
 static void mv_port_stop(struct ata_port *ap)
 {
-	mv_stop_dma(ap);
+	mv_stop_edma(ap);
 	mv_port_free_dma_mem(ap);
 }
 
@@ -1315,8 +1333,7 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc)
 	    (qc->tf.protocol != ATA_PROT_NCQ))
 		return;
 
-	/* Fill in Gen IIE command request block
-	 */
+	/* Fill in Gen IIE command request block */
 	if (!(qc->tf.flags & ATA_TFLAG_WRITE))
 		flags |= CRQB_FLAG_READ;
 
@@ -1384,7 +1401,7 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)
 		 * port.  Turn off EDMA so there won't be problems accessing
 		 * shadow block, etc registers.
 		 */
-		__mv_stop_dma(ap);
+		mv_stop_edma_engine(ap);
 		return ata_qc_issue_prot(qc);
 	}
 
@@ -1407,10 +1424,10 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)
  *      @reset_allowed: bool: 0 == don't trigger from reset here
  *
  *      In most cases, just clear the interrupt and move on.  However,
- *      some cases require an eDMA reset, which is done right before
- *      the COMRESET in mv_phy_reset().  The SERR case requires a
- *      clear of pending errors in the SATA SERROR register.  Finally,
- *      if the port disabled DMA, update our cached copy to match.
+ *      some cases require an eDMA reset, which also performs a COMRESET.
+ *      The SERR case requires a clear of pending errors in the SATA
+ *      SERROR register.  Finally, if the port disabled DMA,
+ *      update our cached copy to match.
  *
  *      LOCKING:
  *      Inherited from caller.
@@ -1648,9 +1665,9 @@ static void mv_host_intr(struct ata_host *host, u32 relevant, unsigned int hc)
 		pp = ap->private_data;
 
 		shift = port << 1;		/* (port * 2) */
-		if (port >= MV_PORTS_PER_HC) {
+		if (port >= MV_PORTS_PER_HC)
 			shift++;	/* skip bit 8 in the HC Main IRQ reg */
-		}
+
 		have_err_bits = ((PORT0_ERR << shift) & relevant);
 
 		if (unlikely(have_err_bits)) {
@@ -1739,6 +1756,7 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance)
 	void __iomem *mmio = hpriv->base;
 	u32 irq_stat, irq_mask;
 
+	/* Note to self: &host->lock == &ap->host->lock == ap->lock */
 	spin_lock(&host->lock);
 
 	irq_stat = readl(hpriv->main_cause_reg_addr);
@@ -1772,14 +1790,6 @@ out_unlock:
 	return IRQ_RETVAL(handled);
 }
 
-static void __iomem *mv5_phy_base(void __iomem *mmio, unsigned int port)
-{
-	void __iomem *hc_mmio = mv_hc_base_from_port(mmio, port);
-	unsigned long ofs = (mv_hardport_from_port(port) + 1) * 0x100UL;
-
-	return hc_mmio + ofs;
-}
-
 static unsigned int mv5_scr_offset(unsigned int sc_reg_in)
 {
 	unsigned int ofs;
@@ -1907,7 +1917,7 @@ static void mv5_reset_hc_port(struct mv_host_priv *hpriv, void __iomem *mmio,
 
 	writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS);
 
-	mv_channel_reset(hpriv, mmio, port);
+	mv_reset_channel(hpriv, mmio, port);
 
 	ZERO(0x028);	/* command */
 	writel(0x11f, port_mmio + EDMA_CFG_OFS);
@@ -2125,14 +2135,15 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
 		m4 = readl(port_mmio + PHY_MODE4);
 
 		if (hp_flags & MV_HP_ERRATA_60X1B2)
-			tmp = readl(port_mmio + 0x310);
+			tmp = readl(port_mmio + PHY_MODE3);
 
+		/* workaround for errata FEr SATA#10 (part 1) */
 		m4 = (m4 & ~(1 << 1)) | (1 << 0);
 
 		writel(m4, port_mmio + PHY_MODE4);
 
 		if (hp_flags & MV_HP_ERRATA_60X1B2)
-			writel(tmp, port_mmio + 0x310);
+			writel(tmp, port_mmio + PHY_MODE3);
 	}
 
 	/* Revert values of pre-emphasis and signal amps to the saved ones */
@@ -2182,7 +2193,7 @@ static void mv_soc_reset_hc_port(struct mv_host_priv *hpriv,
 
 	writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS);
 
-	mv_channel_reset(hpriv, mmio, port);
+	mv_reset_channel(hpriv, mmio, port);
 
 	ZERO(0x028);		/* command */
 	writel(0x101f, port_mmio + EDMA_CFG_OFS);
@@ -2239,7 +2250,7 @@ static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio)
 	return;
 }
 
-static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio,
+static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio,
 			     unsigned int port_no)
 {
 	void __iomem *port_mmio = mv_port_base(mmio, port_no);
@@ -2247,10 +2258,10 @@ static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio,
 	writelfl(ATA_RST, port_mmio + EDMA_CMD_OFS);
 
 	if (IS_GEN_II(hpriv)) {
-		u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL);
+		u32 ifctl = readl(port_mmio + SATA_INTERFACE_CFG);
 		ifctl |= (1 << 7);		/* enable gen2i speed */
 		ifctl = (ifctl & 0xfff) | 0x9b1000; /* from chip spec */
-		writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL);
+		writelfl(ifctl, port_mmio + SATA_INTERFACE_CFG);
 	}
 
 	udelay(25);		/* allow reset propagation */
@@ -2372,14 +2383,7 @@ comreset_retry:
 
 static int mv_prereset(struct ata_link *link, unsigned long deadline)
 {
-	struct ata_port *ap = link->ap;
-	struct mv_port_priv *pp	= ap->private_data;
-
-	mv_stop_dma(ap);
-
-	if (!(pp->pp_flags & MV_PP_FLAG_HAD_A_RESET))
-		pp->pp_flags |= MV_PP_FLAG_HAD_A_RESET;
-
+	mv_stop_edma(link->ap);
 	return 0;
 }
 
@@ -2390,10 +2394,8 @@ static int mv_hardreset(struct ata_link *link, unsigned int *class,
 	struct mv_host_priv *hpriv = ap->host->private_data;
 	void __iomem *mmio = hpriv->base;
 
-	mv_stop_dma(ap);
-
-	mv_channel_reset(hpriv, mmio, ap->port_no);
-
+	mv_stop_edma(ap);
+	mv_reset_channel(hpriv, mmio, ap->port_no);
 	mv_phy_reset(ap, class, deadline);
 
 	return 0;
@@ -2715,10 +2717,10 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx)
 		if (IS_GEN_II(hpriv)) {
 			void __iomem *port_mmio = mv_port_base(mmio, port);
 
-			u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL);
+			u32 ifctl = readl(port_mmio + SATA_INTERFACE_CFG);
 			ifctl |= (1 << 7);		/* enable gen2i speed */
 			ifctl = (ifctl & 0xfff) | 0x9b1000; /* from chip spec */
-			writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL);
+			writelfl(ifctl, port_mmio + SATA_INTERFACE_CFG);
 		}
 
 		hpriv->ops->phy_errata(hpriv, mmio, port);
-- 
cgit v1.2.2


From b562468cc3bd0c81decba1f5f39a7173f839e57e Mon Sep 17 00:00:00 2001
From: Mark Lord <liml@rtr.ca>
Date: Mon, 31 Mar 2008 19:34:40 -0400
Subject: sata_mv clean up mv_stop_edma usage

Clean up uses of mv_stop_edma{_engine}() to match datasheet requirements.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/sata_mv.c | 87 +++++++++++++++++++++++++--------------------------
 1 file changed, 42 insertions(+), 45 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index ee6ca97c4545..5b9f937d0f87 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -517,7 +517,7 @@ static void mv_reset_pci_bus(struct ata_host *host, void __iomem *mmio);
 static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio,
 			     unsigned int port_no);
 static int mv_stop_edma(struct ata_port *ap);
-static int mv_stop_edma_engine(struct ata_port *ap);
+static int mv_stop_edma_engine(void __iomem *port_mmio);
 static void mv_edma_cfg(struct ata_port *ap, int want_ncq);
 
 /* .sg_tablesize is (MV_MAX_SG_CT / 2) in the structures below
@@ -805,7 +805,7 @@ static void mv_start_dma(struct ata_port *ap, void __iomem *port_mmio,
 	if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
 		int using_ncq = ((pp->pp_flags & MV_PP_FLAG_NCQ_EN) != 0);
 		if (want_ncq != using_ncq)
-			mv_stop_edma_engine(ap);
+			mv_stop_edma(ap);
 	}
 	if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN)) {
 		struct mv_host_priv *hpriv = ap->host->private_data;
@@ -841,57 +841,41 @@ static void mv_start_dma(struct ata_port *ap, void __iomem *port_mmio,
 
 /**
  *      mv_stop_edma_engine - Disable eDMA engine
- *      @ap: ATA channel to manipulate
- *
- *      Verify the local cache of the eDMA state is accurate with a
- *      WARN_ON.
+ *      @port_mmio: io base address
  *
  *      LOCKING:
  *      Inherited from caller.
  */
-static int mv_stop_edma_engine(struct ata_port *ap)
+static int mv_stop_edma_engine(void __iomem *port_mmio)
 {
-	void __iomem *port_mmio = mv_ap_base(ap);
-	struct mv_port_priv *pp	= ap->private_data;
-	u32 reg;
-	int i, err = 0;
+	int i;
 
-	if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
-		/* Disable EDMA if active.   The disable bit auto clears.
-		 */
-		writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS);
-		pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
-	} else {
-		WARN_ON(EDMA_EN & readl(port_mmio + EDMA_CMD_OFS));
-	}
+	/* Disable eDMA.  The disable bit auto clears. */
+	writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS);
 
-	/* now properly wait for the eDMA to stop */
-	for (i = 1000; i > 0; i--) {
-		reg = readl(port_mmio + EDMA_CMD_OFS);
+	/* Wait for the chip to confirm eDMA is off. */
+	for (i = 10000; i > 0; i--) {
+		u32 reg = readl(port_mmio + EDMA_CMD_OFS);
 		if (!(reg & EDMA_EN))
-			break;
-
-		udelay(100);
-	}
-
-	if (reg & EDMA_EN) {
-		ata_port_printk(ap, KERN_ERR, "Unable to stop eDMA\n");
-		err = -EIO;
+			return 0;
+		udelay(10);
 	}
-
-	return err;
+	return -EIO;
 }
 
 static int mv_stop_edma(struct ata_port *ap)
 {
-	unsigned long flags;
-	int rc;
-
-	spin_lock_irqsave(&ap->host->lock, flags);
-	rc = mv_stop_edma_engine(ap);
-	spin_unlock_irqrestore(&ap->host->lock, flags);
+	void __iomem *port_mmio = mv_ap_base(ap);
+	struct mv_port_priv *pp = ap->private_data;
 
-	return rc;
+	if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN))
+		return 0;
+	pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
+	if (mv_stop_edma_engine(port_mmio)) {
+		ata_port_printk(ap, KERN_ERR, "Unable to stop eDMA\n");
+		return -EIO;
+	}
+	return 0;
 }
 
 #ifdef ATA_DEBUG
@@ -1401,7 +1385,7 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)
 		 * port.  Turn off EDMA so there won't be problems accessing
 		 * shadow block, etc registers.
 		 */
-		mv_stop_edma_engine(ap);
+		mv_stop_edma(ap);
 		return ata_qc_issue_prot(qc);
 	}
 
@@ -1915,8 +1899,12 @@ static void mv5_reset_hc_port(struct mv_host_priv *hpriv, void __iomem *mmio,
 {
 	void __iomem *port_mmio = mv_port_base(mmio, port);
 
-	writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS);
-
+	/*
+	 * The datasheet warns against setting ATA_RST when EDMA is active
+	 * (but doesn't say what the problem might be).  So we first try
+	 * to disable the EDMA engine before doing the ATA_RST operation.
+	 */
+	mv_stop_edma_engine(port_mmio);
 	mv_reset_channel(hpriv, mmio, port);
 
 	ZERO(0x028);	/* command */
@@ -2191,8 +2179,12 @@ static void mv_soc_reset_hc_port(struct mv_host_priv *hpriv,
 {
 	void __iomem *port_mmio = mv_port_base(mmio, port);
 
-	writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS);
-
+	/*
+	 * The datasheet warns against setting ATA_RST when EDMA is active
+	 * (but doesn't say what the problem might be).  So we first try
+	 * to disable the EDMA engine before doing the ATA_RST operation.
+	 */
+	mv_stop_edma_engine(port_mmio);
 	mv_reset_channel(hpriv, mmio, port);
 
 	ZERO(0x028);		/* command */
@@ -2250,6 +2242,10 @@ static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio)
 	return;
 }
 
+/*
+ * Caller must ensure that EDMA is not active,
+ * by first doing mv_stop_edma() where needed.
+ */
 static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio,
 			     unsigned int port_no)
 {
@@ -2392,10 +2388,11 @@ static int mv_hardreset(struct ata_link *link, unsigned int *class,
 {
 	struct ata_port *ap = link->ap;
 	struct mv_host_priv *hpriv = ap->host->private_data;
+	struct mv_port_priv *pp = ap->private_data;
 	void __iomem *mmio = hpriv->base;
 
-	mv_stop_edma(ap);
 	mv_reset_channel(hpriv, mmio, ap->port_no);
+	pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
 	mv_phy_reset(ap, class, deadline);
 
 	return 0;
-- 
cgit v1.2.2


From b67a1064cb1c1d3b43e01e8b43a6a8dcdefed733 Mon Sep 17 00:00:00 2001
From: Mark Lord <liml@rtr.ca>
Date: Mon, 31 Mar 2008 19:35:13 -0400
Subject: sata_mv fix ifctl handling

Fix handling of the SATA_INTERFACE_CFG register to match datasheet requirements.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/sata_mv.c | 42 +++++++++++++++++++-----------------------
 1 file changed, 19 insertions(+), 23 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 5b9f937d0f87..16c15ed3536e 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -2242,6 +2242,16 @@ static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio)
 	return;
 }
 
+static void mv_setup_ifctl(void __iomem *port_mmio, int want_gen2i)
+{
+	u32 ifctl = readl(port_mmio + SATA_INTERFACE_CFG);
+
+	ifctl = (ifctl & 0xf7f) | 0x9b1000;	/* from chip spec */
+	if (want_gen2i)
+		ifctl |= (1 << 7);		/* enable gen2i speed */
+	writelfl(ifctl, port_mmio + SATA_INTERFACE_CFG);
+}
+
 /*
  * Caller must ensure that EDMA is not active,
  * by first doing mv_stop_edma() where needed.
@@ -2253,18 +2263,17 @@ static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio,
 
 	writelfl(ATA_RST, port_mmio + EDMA_CMD_OFS);
 
-	if (IS_GEN_II(hpriv)) {
-		u32 ifctl = readl(port_mmio + SATA_INTERFACE_CFG);
-		ifctl |= (1 << 7);		/* enable gen2i speed */
-		ifctl = (ifctl & 0xfff) | 0x9b1000; /* from chip spec */
-		writelfl(ifctl, port_mmio + SATA_INTERFACE_CFG);
+	if (!IS_GEN_I(hpriv)) {
+		/* Enable 3.0gb/s link speed */
+		mv_setup_ifctl(port_mmio, 1);
 	}
-
-	udelay(25);		/* allow reset propagation */
-
-	/* Spec never mentions clearing the bit.  Marvell's driver does
-	 * clear the bit, however.
+	/*
+	 * Strobing ATA_RST here causes a hard reset of the SATA transport,
+	 * link, and physical layers.  It resets all SATA interface registers
+	 * (except for SATA_INTERFACE_CFG), and issues a COMRESET to the dev.
 	 */
+	writelfl(ATA_RST, port_mmio + EDMA_CMD_OFS);
+	udelay(25);	/* allow reset propagation */
 	writelfl(0, port_mmio + EDMA_CMD_OFS);
 
 	hpriv->ops->phy_errata(hpriv, mmio, port_no);
@@ -2710,19 +2719,6 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx)
 	hpriv->ops->reset_bus(host, mmio);
 	hpriv->ops->enable_leds(hpriv, mmio);
 
-	for (port = 0; port < host->n_ports; port++) {
-		if (IS_GEN_II(hpriv)) {
-			void __iomem *port_mmio = mv_port_base(mmio, port);
-
-			u32 ifctl = readl(port_mmio + SATA_INTERFACE_CFG);
-			ifctl |= (1 << 7);		/* enable gen2i speed */
-			ifctl = (ifctl & 0xfff) | 0x9b1000; /* from chip spec */
-			writelfl(ifctl, port_mmio + SATA_INTERFACE_CFG);
-		}
-
-		hpriv->ops->phy_errata(hpriv, mmio, port);
-	}
-
 	for (port = 0; port < host->n_ports; port++) {
 		struct ata_port *ap = host->ports[port];
 		void __iomem *port_mmio = mv_port_base(mmio, port);
-- 
cgit v1.2.2


From 9363c3825ea9ad76561eb48a395349dd29211ed6 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Mon, 7 Apr 2008 22:47:16 +0900
Subject: libata: rename SFF functions

SFF functions have confusing names.  Some have sff prefix, some have
bmdma, some std, some pci and some none.  Unify the naming by...

* SFF functions which are common to both BMDMA and non-BMDMA are
  prefixed with ata_sff_.

* SFF functions which are specific to BMDMA are prefixed with
  ata_bmdma_.

* SFF functions which are specific to PCI but apply to both BMDMA and
  non-BMDMA are prefixed with ata_pci_sff_.

* SFF functions which are specific to PCI and BMDMA are prefixed with
  ata_pci_bmdma_.

* Drop generic prefixes from LLD specific routines.  For example,
  bfin_std_dev_select -> bfin_dev_select.

The following renames are noteworthy.

  ata_qc_issue_prot() -> ata_sff_qc_issue()
  ata_pci_default_filter() -> ata_bmdma_mode_filter()
  ata_dev_try_classify() -> ata_sff_dev_classify()

This rename is in preparation of separating SFF support out of libata
core layer.  This patch strictly renames functions and doesn't
introduce any behavior difference.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/ahci.c              |  10 +-
 drivers/ata/ata_generic.c       |   4 +-
 drivers/ata/ata_piix.c          |   6 +-
 drivers/ata/libata-core.c       |  16 +-
 drivers/ata/libata-eh.c         |   2 +-
 drivers/ata/libata-sff.c        | 344 ++++++++++++++++++++--------------------
 drivers/ata/pata_acpi.c         |  16 +-
 drivers/ata/pata_ali.c          |   6 +-
 drivers/ata/pata_amd.c          |  10 +-
 drivers/ata/pata_artop.c        |   6 +-
 drivers/ata/pata_at32.c         |   2 +-
 drivers/ata/pata_atiixp.c       |   6 +-
 drivers/ata/pata_bf54x.c        |  84 +++++-----
 drivers/ata/pata_cmd640.c       |  16 +-
 drivers/ata/pata_cmd64x.c       |   4 +-
 drivers/ata/pata_cs5520.c       |   8 +-
 drivers/ata/pata_cs5530.c       |  12 +-
 drivers/ata/pata_cs5535.c       |   2 +-
 drivers/ata/pata_cs5536.c       |   2 +-
 drivers/ata/pata_cypress.c      |   2 +-
 drivers/ata/pata_efar.c         |   4 +-
 drivers/ata/pata_hpt366.c       |   4 +-
 drivers/ata/pata_hpt37x.c       |  10 +-
 drivers/ata/pata_hpt3x2n.c      |  10 +-
 drivers/ata/pata_hpt3x3.c       |   6 +-
 drivers/ata/pata_icside.c       |   8 +-
 drivers/ata/pata_isapnp.c       |   4 +-
 drivers/ata/pata_it8213.c       |   4 +-
 drivers/ata/pata_it821x.c       |  20 +--
 drivers/ata/pata_ixp4xx_cf.c    |   4 +-
 drivers/ata/pata_jmicron.c      |   4 +-
 drivers/ata/pata_legacy.c       |  32 ++--
 drivers/ata/pata_marvell.c      |   4 +-
 drivers/ata/pata_mpc52xx.c      |   4 +-
 drivers/ata/pata_mpiix.c        |  18 +--
 drivers/ata/pata_netcell.c      |   4 +-
 drivers/ata/pata_ninja32.c      |   6 +-
 drivers/ata/pata_ns87410.c      |  12 +-
 drivers/ata/pata_ns87415.c      |   8 +-
 drivers/ata/pata_oldpiix.c      |  12 +-
 drivers/ata/pata_opti.c         |   4 +-
 drivers/ata/pata_optidma.c      |   4 +-
 drivers/ata/pata_pcmcia.c       |   6 +-
 drivers/ata/pata_pdc2027x.c     |  10 +-
 drivers/ata/pata_pdc202xx_old.c |   2 +-
 drivers/ata/pata_platform.c     |   4 +-
 drivers/ata/pata_qdi.c          |  14 +-
 drivers/ata/pata_radisys.c      |  10 +-
 drivers/ata/pata_rb500_cf.c     |   6 +-
 drivers/ata/pata_rz1000.c       |   2 +-
 drivers/ata/pata_sc1200.c       |  12 +-
 drivers/ata/pata_scc.c          |  80 +++++-----
 drivers/ata/pata_serverworks.c  |  12 +-
 drivers/ata/pata_sil680.c       |  10 +-
 drivers/ata/pata_sis.c          |   4 +-
 drivers/ata/pata_sl82c105.c     |   4 +-
 drivers/ata/pata_triflex.c      |   4 +-
 drivers/ata/pata_via.c          |   6 +-
 drivers/ata/pata_winbond.c      |   6 +-
 drivers/ata/pdc_adma.c          |  12 +-
 drivers/ata/sata_inic162x.c     |  12 +-
 drivers/ata/sata_mv.c           |   6 +-
 drivers/ata/sata_nv.c           |  32 ++--
 drivers/ata/sata_promise.c      |  12 +-
 drivers/ata/sata_qstor.c        |  10 +-
 drivers/ata/sata_sil.c          |   8 +-
 drivers/ata/sata_sis.c          |   6 +-
 drivers/ata/sata_svw.c          |   4 +-
 drivers/ata/sata_sx4.c          |  26 +--
 drivers/ata/sata_uli.c          |  12 +-
 drivers/ata/sata_via.c          |  12 +-
 drivers/ata/sata_vsc.c          |   4 +-
 72 files changed, 546 insertions(+), 546 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 3efa9904f7a0..771509c9a3fb 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1303,9 +1303,9 @@ static int ahci_do_softreset(struct ata_link *link, unsigned int *class,
 	ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0);
 
 	/* wait a while before checking status */
-	ata_wait_after_reset(ap, deadline);
+	ata_sff_wait_after_reset(ap, deadline);
 
-	rc = ata_wait_ready(ap, deadline);
+	rc = ata_sff_wait_ready(ap, deadline);
 	/* link occupied, -ENODEV too is an error */
 	if (rc) {
 		reason = "device not ready";
@@ -1350,7 +1350,7 @@ static int ahci_hardreset(struct ata_link *link, unsigned int *class,
 	tf.command = 0x80;
 	ata_tf_to_fis(&tf, 0, 0, d2h_fis);
 
-	rc = sata_std_hardreset(link, class, deadline);
+	rc = sata_sff_hardreset(link, class, deadline);
 
 	ahci_start_engine(ap);
 
@@ -1431,7 +1431,7 @@ static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
 	 * have to be reset again.  For most cases, this should
 	 * suffice while making probing snappish enough.
 	 */
-	rc = ata_wait_ready(ap, jiffies + 2 * HZ);
+	rc = ata_sff_wait_ready(ap, jiffies + 2 * HZ);
 	if (rc)
 		ahci_kick_engine(ap, 0);
 
@@ -1444,7 +1444,7 @@ static void ahci_postreset(struct ata_link *link, unsigned int *class)
 	void __iomem *port_mmio = ahci_port_base(ap);
 	u32 new_tmp, tmp;
 
-	ata_std_postreset(link, class);
+	ata_sff_postreset(link, class);
 
 	/* Make sure port's ATAPI bit is set appropriately */
 	new_tmp = tmp = readl(port_mmio + PORT_CMD);
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index b23e2a1099c5..47aeccd52fa9 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -150,9 +150,9 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id
 		return -ENODEV;
 
 	if (dev->vendor == PCI_VENDOR_ID_AL)
-	    	ata_pci_clear_simplex(dev);
+		ata_pci_bmdma_clear_simplex(dev);
 
-	return ata_pci_init_one(dev, ppi, &generic_sht, NULL);
+	return ata_pci_sff_init_one(dev, ppi, &generic_sht, NULL);
 }
 
 static struct pci_device_id ata_generic[] = {
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index e113f2f80275..7ab76a413cdf 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -629,7 +629,7 @@ static int piix_pata_prereset(struct ata_link *link, unsigned long deadline)
 
 	if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no]))
 		return -ENOENT;
-	return ata_std_prereset(link, deadline);
+	return ata_sff_prereset(link, deadline);
 }
 
 /**
@@ -1493,7 +1493,7 @@ static int __devinit piix_init_one(struct pci_dev *pdev,
 		hpriv->map = piix_init_sata_map(pdev, port_info,
 					piix_map_db_table[ent->driver_data]);
 
-	rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
+	rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
 	if (rc)
 		return rc;
 	host->private_data = hpriv;
@@ -1527,7 +1527,7 @@ static int __devinit piix_init_one(struct pci_dev *pdev,
 	}
 
 	pci_set_master(pdev);
-	return ata_pci_activate_sff_host(host, ata_interrupt, &piix_sht);
+	return ata_pci_sff_activate_host(host, ata_sff_interrupt, &piix_sht);
 }
 
 static int __init piix_init(void)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index fa205d7c5bea..cbdbfb5eaeaa 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -75,9 +75,9 @@ const unsigned long sata_deb_timing_long[]		= { 100, 2000, 5000 };
 
 const struct ata_port_operations ata_base_port_ops = {
 	.irq_clear		= ata_noop_irq_clear,
-	.prereset		= ata_std_prereset,
-	.hardreset		= sata_std_hardreset,
-	.postreset		= ata_std_postreset,
+	.prereset		= ata_sff_prereset,
+	.hardreset		= sata_sff_hardreset,
+	.postreset		= ata_sff_postreset,
 	.error_handler		= ata_std_error_handler,
 };
 
@@ -3425,7 +3425,7 @@ int sata_link_resume(struct ata_link *link, const unsigned long *params,
 }
 
 /**
- *	ata_std_prereset - prepare for reset
+ *	ata_sff_prereset - prepare for reset
  *	@link: ATA link to be reset
  *	@deadline: deadline jiffies for the operation
  *
@@ -3441,7 +3441,7 @@ int sata_link_resume(struct ata_link *link, const unsigned long *params,
  *	RETURNS:
  *	0 on success, -errno otherwise.
  */
-int ata_std_prereset(struct ata_link *link, unsigned long deadline)
+int ata_sff_prereset(struct ata_link *link, unsigned long deadline)
 {
 	struct ata_port *ap = link->ap;
 	struct ata_eh_context *ehc = &link->eh_context;
@@ -3463,7 +3463,7 @@ int ata_std_prereset(struct ata_link *link, unsigned long deadline)
 
 	/* wait for !BSY if we don't know that no device is attached */
 	if (!ata_link_offline(link)) {
-		rc = ata_wait_ready(ap, deadline);
+		rc = ata_sff_wait_ready(ap, deadline);
 		if (rc && rc != -ENODEV) {
 			ata_link_printk(link, KERN_WARNING, "device not ready "
 					"(errno=%d), forcing hardreset\n", rc);
@@ -3535,7 +3535,7 @@ int sata_link_hardreset(struct ata_link *link, const unsigned long *timing,
 }
 
 /**
- *	ata_std_postreset - standard postreset callback
+ *	ata_sff_postreset - standard postreset callback
  *	@link: the target ata_link
  *	@classes: classes of attached devices
  *
@@ -3546,7 +3546,7 @@ int sata_link_hardreset(struct ata_link *link, const unsigned long *timing,
  *	LOCKING:
  *	Kernel thread context (may sleep)
  */
-void ata_std_postreset(struct ata_link *link, unsigned int *classes)
+void ata_sff_postreset(struct ata_link *link, unsigned int *classes)
 {
 	struct ata_port *ap = link->ap;
 	u32 serror;
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index cc8548e1572a..f4f9c2783821 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2861,7 +2861,7 @@ void ata_std_error_handler(struct ata_port *ap)
 	 * ata_base_port_ops.  Ignore it if SCR access is not
 	 * available.
 	 */
-	if (hardreset == sata_std_hardreset && !sata_scr_valid(&ap->link))
+	if (hardreset == sata_sff_hardreset && !sata_scr_valid(&ap->link))
 		hardreset = NULL;
 
 	ata_do_eh(ap, ops->prereset, ops->softreset, hardreset, ops->postreset);
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 5208ca21f634..8544321293d4 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -42,22 +42,22 @@
 const struct ata_port_operations ata_sff_port_ops = {
 	.inherits		= &ata_base_port_ops,
 
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
-	.softreset		= ata_std_softreset,
-	.error_handler		= ata_bmdma_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-
-	.dev_select		= ata_std_dev_select,
-	.check_status		= ata_check_status,
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.exec_command		= ata_exec_command,
-	.data_xfer		= ata_data_xfer,
-	.irq_on			= ata_irq_on,
+	.qc_prep		= ata_sff_qc_prep,
+	.qc_issue		= ata_sff_qc_issue,
+
+	.freeze			= ata_sff_freeze,
+	.thaw			= ata_sff_thaw,
+	.softreset		= ata_sff_softreset,
+	.error_handler		= ata_sff_error_handler,
+	.post_internal_cmd	= ata_sff_post_internal_cmd,
+
+	.dev_select		= ata_sff_dev_select,
+	.check_status		= ata_sff_check_status,
+	.tf_load		= ata_sff_tf_load,
+	.tf_read		= ata_sff_tf_read,
+	.exec_command		= ata_sff_exec_command,
+	.data_xfer		= ata_sff_data_xfer,
+	.irq_on			= ata_sff_irq_on,
 
 	.port_start		= ata_sff_port_start,
 };
@@ -65,13 +65,13 @@ const struct ata_port_operations ata_sff_port_ops = {
 const struct ata_port_operations ata_bmdma_port_ops = {
 	.inherits		= &ata_sff_port_ops,
 
-	.mode_filter		= ata_pci_default_filter,
+	.mode_filter		= ata_bmdma_mode_filter,
 
 	.bmdma_setup		= ata_bmdma_setup,
 	.bmdma_start		= ata_bmdma_start,
 	.bmdma_stop		= ata_bmdma_stop,
 	.bmdma_status		= ata_bmdma_status,
-	.irq_clear		= ata_bmdma_irq_clear,
+	.irq_clear		= ata_sff_irq_clear,
 };
 
 /**
@@ -181,7 +181,7 @@ static void ata_fill_sg_dumb(struct ata_queued_cmd *qc)
 }
 
 /**
- *	ata_qc_prep - Prepare taskfile for submission
+ *	ata_sff_qc_prep - Prepare taskfile for submission
  *	@qc: Metadata associated with taskfile to be prepared
  *
  *	Prepare ATA taskfile for submission.
@@ -189,7 +189,7 @@ static void ata_fill_sg_dumb(struct ata_queued_cmd *qc)
  *	LOCKING:
  *	spin_lock_irqsave(host lock)
  */
-void ata_qc_prep(struct ata_queued_cmd *qc)
+void ata_sff_qc_prep(struct ata_queued_cmd *qc)
 {
 	if (!(qc->flags & ATA_QCFLAG_DMAMAP))
 		return;
@@ -198,7 +198,7 @@ void ata_qc_prep(struct ata_queued_cmd *qc)
 }
 
 /**
- *	ata_dumb_qc_prep - Prepare taskfile for submission
+ *	ata_sff_dumb_qc_prep - Prepare taskfile for submission
  *	@qc: Metadata associated with taskfile to be prepared
  *
  *	Prepare ATA taskfile for submission.
@@ -206,7 +206,7 @@ void ata_qc_prep(struct ata_queued_cmd *qc)
  *	LOCKING:
  *	spin_lock_irqsave(host lock)
  */
-void ata_dumb_qc_prep(struct ata_queued_cmd *qc)
+void ata_sff_dumb_qc_prep(struct ata_queued_cmd *qc)
 {
 	if (!(qc->flags & ATA_QCFLAG_DMAMAP))
 		return;
@@ -215,7 +215,7 @@ void ata_dumb_qc_prep(struct ata_queued_cmd *qc)
 }
 
 /**
- *	ata_check_status - Read device status reg & clear interrupt
+ *	ata_sff_check_status - Read device status reg & clear interrupt
  *	@ap: port where the device is
  *
  *	Reads ATA taskfile status register for currently-selected device
@@ -225,13 +225,13 @@ void ata_dumb_qc_prep(struct ata_queued_cmd *qc)
  *	LOCKING:
  *	Inherited from caller.
  */
-u8 ata_check_status(struct ata_port *ap)
+u8 ata_sff_check_status(struct ata_port *ap)
 {
 	return ioread8(ap->ioaddr.status_addr);
 }
 
 /**
- *	ata_altstatus - Read device alternate status reg
+ *	ata_sff_altstatus - Read device alternate status reg
  *	@ap: port where the device is
  *
  *	Reads ATA taskfile alternate status register for
@@ -243,7 +243,7 @@ u8 ata_check_status(struct ata_port *ap)
  *	LOCKING:
  *	Inherited from caller.
  */
-u8 ata_altstatus(struct ata_port *ap)
+u8 ata_sff_altstatus(struct ata_port *ap)
 {
 	if (ap->ops->check_altstatus)
 		return ap->ops->check_altstatus(ap);
@@ -252,7 +252,7 @@ u8 ata_altstatus(struct ata_port *ap)
 }
 
 /**
- *	ata_busy_sleep - sleep until BSY clears, or timeout
+ *	ata_sff_busy_sleep - sleep until BSY clears, or timeout
  *	@ap: port containing status register to be polled
  *	@tmout_pat: impatience timeout
  *	@tmout: overall timeout
@@ -266,19 +266,19 @@ u8 ata_altstatus(struct ata_port *ap)
  *	RETURNS:
  *	0 on success, -errno otherwise.
  */
-int ata_busy_sleep(struct ata_port *ap,
-		   unsigned long tmout_pat, unsigned long tmout)
+int ata_sff_busy_sleep(struct ata_port *ap,
+		       unsigned long tmout_pat, unsigned long tmout)
 {
 	unsigned long timer_start, timeout;
 	u8 status;
 
-	status = ata_busy_wait(ap, ATA_BUSY, 300);
+	status = ata_sff_busy_wait(ap, ATA_BUSY, 300);
 	timer_start = jiffies;
 	timeout = timer_start + tmout_pat;
 	while (status != 0xff && (status & ATA_BUSY) &&
 	       time_before(jiffies, timeout)) {
 		msleep(50);
-		status = ata_busy_wait(ap, ATA_BUSY, 3);
+		status = ata_sff_busy_wait(ap, ATA_BUSY, 3);
 	}
 
 	if (status != 0xff && (status & ATA_BUSY))
@@ -307,7 +307,7 @@ int ata_busy_sleep(struct ata_port *ap,
 }
 
 /**
- *	ata_wait_ready - sleep until BSY clears, or timeout
+ *	ata_sff_wait_ready - sleep until BSY clears, or timeout
  *	@ap: port containing status register to be polled
  *	@deadline: deadline jiffies for the operation
  *
@@ -320,7 +320,7 @@ int ata_busy_sleep(struct ata_port *ap,
  *	RETURNS:
  *	0 on success, -errno otherwise.
  */
-int ata_wait_ready(struct ata_port *ap, unsigned long deadline)
+int ata_sff_wait_ready(struct ata_port *ap, unsigned long deadline)
 {
 	unsigned long start = jiffies;
 	int warned = 0;
@@ -349,7 +349,7 @@ int ata_wait_ready(struct ata_port *ap, unsigned long deadline)
 }
 
 /**
- *	ata_std_dev_select - Select device 0/1 on ATA bus
+ *	ata_sff_dev_select - Select device 0/1 on ATA bus
  *	@ap: ATA channel to manipulate
  *	@device: ATA device (numbered from zero) to select
  *
@@ -362,7 +362,7 @@ int ata_wait_ready(struct ata_port *ap, unsigned long deadline)
  *	LOCKING:
  *	caller.
  */
-void ata_std_dev_select(struct ata_port *ap, unsigned int device)
+void ata_sff_dev_select(struct ata_port *ap, unsigned int device)
 {
 	u8 tmp;
 
@@ -372,7 +372,7 @@ void ata_std_dev_select(struct ata_port *ap, unsigned int device)
 		tmp = ATA_DEVICE_OBS | ATA_DEV1;
 
 	iowrite8(tmp, ap->ioaddr.device_addr);
-	ata_pause(ap);		/* needed; also flushes, for mmio */
+	ata_sff_pause(ap);	/* needed; also flushes, for mmio */
 }
 
 /**
@@ -386,9 +386,9 @@ void ata_std_dev_select(struct ata_port *ap, unsigned int device)
  *	make either device 0, or device 1, active on the
  *	ATA channel.
  *
- *	This is a high-level version of ata_std_dev_select(),
- *	which additionally provides the services of inserting
- *	the proper pauses and status polling, where needed.
+ *	This is a high-level version of ata_sff_dev_select(), which
+ *	additionally provides the services of inserting the proper
+ *	pauses and status polling, where needed.
  *
  *	LOCKING:
  *	caller.
@@ -413,7 +413,7 @@ void ata_dev_select(struct ata_port *ap, unsigned int device,
 }
 
 /**
- *	ata_irq_on - Enable interrupts on a port.
+ *	ata_sff_irq_on - Enable interrupts on a port.
  *	@ap: Port on which interrupts are enabled.
  *
  *	Enable interrupts on a legacy IDE device using MMIO or PIO,
@@ -422,7 +422,7 @@ void ata_dev_select(struct ata_port *ap, unsigned int device,
  *	LOCKING:
  *	Inherited from caller.
  */
-u8 ata_irq_on(struct ata_port *ap)
+u8 ata_sff_irq_on(struct ata_port *ap)
 {
 	struct ata_ioports *ioaddr = &ap->ioaddr;
 	u8 tmp;
@@ -440,7 +440,7 @@ u8 ata_irq_on(struct ata_port *ap)
 }
 
 /**
- *	ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt.
+ *	ata_sff_irq_clear - Clear PCI IDE BMDMA interrupt.
  *	@ap: Port associated with this ATA transaction.
  *
  *	Clear interrupt and error flags in DMA status register.
@@ -450,7 +450,7 @@ u8 ata_irq_on(struct ata_port *ap)
  *	LOCKING:
  *	spin_lock_irqsave(host lock)
  */
-void ata_bmdma_irq_clear(struct ata_port *ap)
+void ata_sff_irq_clear(struct ata_port *ap)
 {
 	void __iomem *mmio = ap->ioaddr.bmdma_addr;
 
@@ -461,7 +461,7 @@ void ata_bmdma_irq_clear(struct ata_port *ap)
 }
 
 /**
- *	ata_tf_load - send taskfile registers to host controller
+ *	ata_sff_tf_load - send taskfile registers to host controller
  *	@ap: Port to which output is sent
  *	@tf: ATA taskfile register set
  *
@@ -470,7 +470,7 @@ void ata_bmdma_irq_clear(struct ata_port *ap)
  *	LOCKING:
  *	Inherited from caller.
  */
-void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
+void ata_sff_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
 {
 	struct ata_ioports *ioaddr = &ap->ioaddr;
 	unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
@@ -520,7 +520,7 @@ void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
 }
 
 /**
- *	ata_tf_read - input device's ATA taskfile shadow registers
+ *	ata_sff_tf_read - input device's ATA taskfile shadow registers
  *	@ap: Port from which input is read
  *	@tf: ATA taskfile register set for storing input
  *
@@ -532,11 +532,11 @@ void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
  *	LOCKING:
  *	Inherited from caller.
  */
-void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
+void ata_sff_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
 {
 	struct ata_ioports *ioaddr = &ap->ioaddr;
 
-	tf->command = ata_check_status(ap);
+	tf->command = ata_sff_check_status(ap);
 	tf->feature = ioread8(ioaddr->error_addr);
 	tf->nsect = ioread8(ioaddr->nsect_addr);
 	tf->lbal = ioread8(ioaddr->lbal_addr);
@@ -560,7 +560,7 @@ void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
 }
 
 /**
- *	ata_exec_command - issue ATA command to host controller
+ *	ata_sff_exec_command - issue ATA command to host controller
  *	@ap: port to which command is being issued
  *	@tf: ATA taskfile register set
  *
@@ -570,12 +570,12 @@ void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
  *	LOCKING:
  *	spin_lock_irqsave(host lock)
  */
-void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf)
+void ata_sff_exec_command(struct ata_port *ap, const struct ata_taskfile *tf)
 {
 	DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command);
 
 	iowrite8(tf->command, ap->ioaddr.command_addr);
-	ata_pause(ap);
+	ata_sff_pause(ap);
 }
 
 /**
@@ -598,7 +598,7 @@ static inline void ata_tf_to_host(struct ata_port *ap,
 }
 
 /**
- *	ata_data_xfer - Transfer data by PIO
+ *	ata_sff_data_xfer - Transfer data by PIO
  *	@dev: device to target
  *	@buf: data buffer
  *	@buflen: buffer length
@@ -612,8 +612,8 @@ static inline void ata_tf_to_host(struct ata_port *ap,
  *	RETURNS:
  *	Bytes consumed.
  */
-unsigned int ata_data_xfer(struct ata_device *dev, unsigned char *buf,
-			   unsigned int buflen, int rw)
+unsigned int ata_sff_data_xfer(struct ata_device *dev, unsigned char *buf,
+			       unsigned int buflen, int rw)
 {
 	struct ata_port *ap = dev->link->ap;
 	void __iomem *data_addr = ap->ioaddr.data_addr;
@@ -644,7 +644,7 @@ unsigned int ata_data_xfer(struct ata_device *dev, unsigned char *buf,
 }
 
 /**
- *	ata_data_xfer_noirq - Transfer data by PIO
+ *	ata_sff_data_xfer_noirq - Transfer data by PIO
  *	@dev: device to target
  *	@buf: data buffer
  *	@buflen: buffer length
@@ -659,14 +659,14 @@ unsigned int ata_data_xfer(struct ata_device *dev, unsigned char *buf,
  *	RETURNS:
  *	Bytes consumed.
  */
-unsigned int ata_data_xfer_noirq(struct ata_device *dev, unsigned char *buf,
-				 unsigned int buflen, int rw)
+unsigned int ata_sff_data_xfer_noirq(struct ata_device *dev, unsigned char *buf,
+				     unsigned int buflen, int rw)
 {
 	unsigned long flags;
 	unsigned int consumed;
 
 	local_irq_save(flags);
-	consumed = ata_data_xfer(dev, buf, buflen, rw);
+	consumed = ata_sff_data_xfer(dev, buf, buflen, rw);
 	local_irq_restore(flags);
 
 	return consumed;
@@ -752,7 +752,7 @@ static void ata_pio_sectors(struct ata_queued_cmd *qc)
 	} else
 		ata_pio_sector(qc);
 
-	ata_altstatus(qc->ap); /* flush */
+	ata_sff_altstatus(qc->ap); /* flush */
 }
 
 /**
@@ -773,7 +773,7 @@ static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc)
 	WARN_ON(qc->dev->cdb_len < 12);
 
 	ap->ops->data_xfer(qc->dev, qc->cdb, qc->dev->cdb_len, 1);
-	ata_altstatus(ap); /* flush */
+	ata_sff_altstatus(ap); /* flush */
 
 	switch (qc->tf.protocol) {
 	case ATAPI_PROT_PIO:
@@ -915,7 +915,7 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc)
 
 	if (unlikely(__atapi_pio_bytes(qc, bytes)))
 		goto err_out;
-	ata_altstatus(ap); /* flush */
+	ata_sff_altstatus(ap); /* flush */
 
 	return;
 
@@ -1004,7 +1004,7 @@ static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq)
 }
 
 /**
- *	ata_hsm_move - move the HSM to the next state.
+ *	ata_sff_hsm_move - move the HSM to the next state.
  *	@ap: the target ata_port
  *	@qc: qc on going
  *	@status: current device status
@@ -1013,15 +1013,15 @@ static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq)
  *	RETURNS:
  *	1 when poll next status needed, 0 otherwise.
  */
-int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc,
-		 u8 status, int in_wq)
+int ata_sff_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc,
+		     u8 status, int in_wq)
 {
 	unsigned long flags = 0;
 	int poll_next;
 
 	WARN_ON((qc->flags & ATA_QCFLAG_ACTIVE) == 0);
 
-	/* Make sure ata_qc_issue_prot() does not throw things
+	/* Make sure ata_sff_qc_issue() does not throw things
 	 * like DMA polling into the workqueue. Notice that
 	 * in_wq is not equivalent to (qc->tf.flags & ATA_TFLAG_POLLING).
 	 */
@@ -1263,10 +1263,10 @@ fsm_start:
 	 * or something.  Snooze for a couple msecs, then
 	 * chk-status again.  If still busy, queue delayed work.
 	 */
-	status = ata_busy_wait(ap, ATA_BUSY, 5);
+	status = ata_sff_busy_wait(ap, ATA_BUSY, 5);
 	if (status & ATA_BUSY) {
 		msleep(2);
-		status = ata_busy_wait(ap, ATA_BUSY, 10);
+		status = ata_sff_busy_wait(ap, ATA_BUSY, 10);
 		if (status & ATA_BUSY) {
 			ata_pio_queue_task(ap, qc, ATA_SHORT_PAUSE);
 			return;
@@ -1274,7 +1274,7 @@ fsm_start:
 	}
 
 	/* move the HSM */
-	poll_next = ata_hsm_move(ap, qc, status, 1);
+	poll_next = ata_sff_hsm_move(ap, qc, status, 1);
 
 	/* another command or interrupt handler
 	 * may be running at this point.
@@ -1284,7 +1284,7 @@ fsm_start:
 }
 
 /**
- *	ata_qc_issue_prot - issue taskfile to device in proto-dependent manner
+ *	ata_sff_qc_issue - issue taskfile to device in proto-dependent manner
  *	@qc: command to issue to device
  *
  *	Using various libata functions and hooks, this function
@@ -1300,7 +1300,7 @@ fsm_start:
  *	RETURNS:
  *	Zero on success, AC_ERR_* mask on failure
  */
-unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc)
+unsigned int ata_sff_qc_issue(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
 
@@ -1415,7 +1415,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc)
 }
 
 /**
- *	ata_host_intr - Handle host interrupt for given (port, task)
+ *	ata_sff_host_intr - Handle host interrupt for given (port, task)
  *	@ap: Port on which interrupt arrived (possibly...)
  *	@qc: Taskfile currently active in engine
  *
@@ -1429,8 +1429,8 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc)
  *	RETURNS:
  *	One if interrupt was handled, zero if not (shared irq).
  */
-inline unsigned int ata_host_intr(struct ata_port *ap,
-				  struct ata_queued_cmd *qc)
+inline unsigned int ata_sff_host_intr(struct ata_port *ap,
+				      struct ata_queued_cmd *qc)
 {
 	struct ata_eh_info *ehi = &ap->link.eh_info;
 	u8 status, host_stat = 0;
@@ -1481,7 +1481,7 @@ inline unsigned int ata_host_intr(struct ata_port *ap,
 	}
 
 	/* check altstatus */
-	status = ata_altstatus(ap);
+	status = ata_sff_altstatus(ap);
 	if (status & ATA_BUSY)
 		goto idle_irq;
 
@@ -1493,7 +1493,7 @@ inline unsigned int ata_host_intr(struct ata_port *ap,
 	/* ack bmdma irq events */
 	ap->ops->irq_clear(ap);
 
-	ata_hsm_move(ap, qc, status, 0);
+	ata_sff_hsm_move(ap, qc, status, 0);
 
 	if (unlikely(qc->err_mask) && (qc->tf.protocol == ATA_PROT_DMA ||
 				       qc->tf.protocol == ATAPI_PROT_DMA))
@@ -1516,12 +1516,12 @@ idle_irq:
 }
 
 /**
- *	ata_interrupt - Default ATA host interrupt handler
+ *	ata_sff_interrupt - Default ATA host interrupt handler
  *	@irq: irq line (unused)
  *	@dev_instance: pointer to our ata_host information structure
  *
  *	Default interrupt handler for PCI IDE devices.  Calls
- *	ata_host_intr() for each port that is not disabled.
+ *	ata_sff_host_intr() for each port that is not disabled.
  *
  *	LOCKING:
  *	Obtains host lock during operation.
@@ -1529,7 +1529,7 @@ idle_irq:
  *	RETURNS:
  *	IRQ_NONE or IRQ_HANDLED.
  */
-irqreturn_t ata_interrupt(int irq, void *dev_instance)
+irqreturn_t ata_sff_interrupt(int irq, void *dev_instance)
 {
 	struct ata_host *host = dev_instance;
 	unsigned int i;
@@ -1550,7 +1550,7 @@ irqreturn_t ata_interrupt(int irq, void *dev_instance)
 			qc = ata_qc_from_tag(ap, ap->link.active_tag);
 			if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)) &&
 			    (qc->flags & ATA_QCFLAG_ACTIVE))
-				handled |= ata_host_intr(ap, qc);
+				handled |= ata_sff_host_intr(ap, qc);
 		}
 	}
 
@@ -1560,7 +1560,7 @@ irqreturn_t ata_interrupt(int irq, void *dev_instance)
 }
 
 /**
- *	ata_bmdma_freeze - Freeze BMDMA controller port
+ *	ata_sff_freeze - Freeze SFF controller port
  *	@ap: port to freeze
  *
  *	Freeze BMDMA controller port.
@@ -1568,7 +1568,7 @@ irqreturn_t ata_interrupt(int irq, void *dev_instance)
  *	LOCKING:
  *	Inherited from caller.
  */
-void ata_bmdma_freeze(struct ata_port *ap)
+void ata_sff_freeze(struct ata_port *ap)
 {
 	struct ata_ioports *ioaddr = &ap->ioaddr;
 
@@ -1588,15 +1588,15 @@ void ata_bmdma_freeze(struct ata_port *ap)
 }
 
 /**
- *	ata_bmdma_thaw - Thaw BMDMA controller port
+ *	ata_sff_thaw - Thaw SFF controller port
  *	@ap: port to thaw
  *
- *	Thaw BMDMA controller port.
+ *	Thaw SFF controller port.
  *
  *	LOCKING:
  *	Inherited from caller.
  */
-void ata_bmdma_thaw(struct ata_port *ap)
+void ata_sff_thaw(struct ata_port *ap)
 {
 	/* clear & re-enable interrupts */
 	ap->ops->check_status(ap);
@@ -1647,7 +1647,7 @@ static unsigned int ata_devchk(struct ata_port *ap, unsigned int device)
 }
 
 /**
- *	ata_dev_try_classify - Parse returned ATA device signature
+ *	ata_sff_dev_classify - Parse returned ATA device signature
  *	@dev: ATA device to classify (starting at zero)
  *	@present: device seems present
  *	@r_err: Value of error register on completion
@@ -1667,7 +1667,7 @@ static unsigned int ata_devchk(struct ata_port *ap, unsigned int device)
  *	RETURNS:
  *	Device type - %ATA_DEV_ATA, %ATA_DEV_ATAPI or %ATA_DEV_NONE.
  */
-unsigned int ata_dev_try_classify(struct ata_device *dev, int present,
+unsigned int ata_sff_dev_classify(struct ata_device *dev, int present,
 				  u8 *r_err)
 {
 	struct ata_port *ap = dev->link->ap;
@@ -1727,7 +1727,7 @@ static int ata_bus_post_reset(struct ata_port *ap, unsigned int devmask,
 	 * BSY bit to clear
 	 */
 	if (dev0) {
-		rc = ata_wait_ready(ap, deadline);
+		rc = ata_sff_wait_ready(ap, deadline);
 		if (rc) {
 			if (rc != -ENODEV)
 				return rc;
@@ -1757,7 +1757,7 @@ static int ata_bus_post_reset(struct ata_port *ap, unsigned int devmask,
 			msleep(50);	/* give drive a breather */
 		}
 
-		rc = ata_wait_ready(ap, deadline);
+		rc = ata_sff_wait_ready(ap, deadline);
 		if (rc) {
 			if (rc != -ENODEV)
 				return rc;
@@ -1776,7 +1776,7 @@ static int ata_bus_post_reset(struct ata_port *ap, unsigned int devmask,
 }
 
 /**
- *	ata_wait_after_reset - wait before checking status after reset
+ *	ata_sff_wait_after_reset - wait before checking status after reset
  *	@ap: port containing status register to be polled
  *	@deadline: deadline jiffies for the operation
  *
@@ -1790,7 +1790,7 @@ static int ata_bus_post_reset(struct ata_port *ap, unsigned int devmask,
  *	LOCKING:
  *	Kernel thread context (may sleep).
  */
-void ata_wait_after_reset(struct ata_port *ap, unsigned long deadline)
+void ata_sff_wait_after_reset(struct ata_port *ap, unsigned long deadline)
 {
 	unsigned long until = jiffies + ATA_TMOUT_FF_WAIT;
 
@@ -1845,7 +1845,7 @@ static int ata_bus_softreset(struct ata_port *ap, unsigned int devmask,
 	iowrite8(ap->ctl, ioaddr->ctl_addr);
 
 	/* wait a while before checking status */
-	ata_wait_after_reset(ap, deadline);
+	ata_sff_wait_after_reset(ap, deadline);
 
 	/* Before we perform post reset processing we want to see if
 	 * the bus shows 0xFF because the odd clown forgets the D7
@@ -1858,7 +1858,7 @@ static int ata_bus_softreset(struct ata_port *ap, unsigned int devmask,
 }
 
 /**
- *	ata_std_softreset - reset host port via ATA SRST
+ *	ata_sff_softreset - reset host port via ATA SRST
  *	@link: ATA link to reset
  *	@classes: resulting classes of attached devices
  *	@deadline: deadline jiffies for the operation
@@ -1871,7 +1871,7 @@ static int ata_bus_softreset(struct ata_port *ap, unsigned int devmask,
  *	RETURNS:
  *	0 on success, -errno otherwise.
  */
-int ata_std_softreset(struct ata_link *link, unsigned int *classes,
+int ata_sff_softreset(struct ata_link *link, unsigned int *classes,
 		      unsigned long deadline)
 {
 	struct ata_port *ap = link->ap;
@@ -1906,10 +1906,10 @@ int ata_std_softreset(struct ata_link *link, unsigned int *classes,
 	}
 
 	/* determine by signature whether we have ATA or ATAPI devices */
-	classes[0] = ata_dev_try_classify(&link->device[0],
+	classes[0] = ata_sff_dev_classify(&link->device[0],
 					  devmask & (1 << 0), &err);
 	if (slave_possible && err != 0x81)
-		classes[1] = ata_dev_try_classify(&link->device[1],
+		classes[1] = ata_sff_dev_classify(&link->device[1],
 						  devmask & (1 << 1), &err);
 
  out:
@@ -1918,7 +1918,7 @@ int ata_std_softreset(struct ata_link *link, unsigned int *classes,
 }
 
 /**
- *	sata_std_hardreset - reset host port via SATA phy reset
+ *	sata_sff_hardreset - reset host port via SATA phy reset
  *	@link: link to reset
  *	@class: resulting class of attached device
  *	@deadline: deadline jiffies for the operation
@@ -1932,7 +1932,7 @@ int ata_std_softreset(struct ata_link *link, unsigned int *classes,
  *	RETURNS:
  *	0 on success, -errno otherwise.
  */
-int sata_std_hardreset(struct ata_link *link, unsigned int *class,
+int sata_sff_hardreset(struct ata_link *link, unsigned int *class,
 		       unsigned long deadline)
 {
 	struct ata_port *ap = link->ap;
@@ -1957,7 +1957,7 @@ int sata_std_hardreset(struct ata_link *link, unsigned int *class,
 	}
 
 	/* wait a while before checking status */
-	ata_wait_after_reset(ap, deadline);
+	ata_sff_wait_after_reset(ap, deadline);
 
 	/* If PMP is supported, we have to do follow-up SRST.  Note
 	 * that some PMPs don't send D2H Reg FIS after hardreset at
@@ -1965,11 +1965,11 @@ int sata_std_hardreset(struct ata_link *link, unsigned int *class,
 	 * second and request follow-up SRST.
 	 */
 	if (ap->flags & ATA_FLAG_PMP) {
-		ata_wait_ready(ap, jiffies + HZ);
+		ata_sff_wait_ready(ap, jiffies + HZ);
 		return -EAGAIN;
 	}
 
-	rc = ata_wait_ready(ap, deadline);
+	rc = ata_sff_wait_ready(ap, deadline);
 	/* link occupied, -ENODEV too is an error */
 	if (rc) {
 		ata_link_printk(link, KERN_ERR,
@@ -1979,17 +1979,17 @@ int sata_std_hardreset(struct ata_link *link, unsigned int *class,
 
 	ap->ops->dev_select(ap, 0);	/* probably unnecessary */
 
-	*class = ata_dev_try_classify(link->device, 1, NULL);
+	*class = ata_sff_dev_classify(link->device, 1, NULL);
 
 	DPRINTK("EXIT, class=%u\n", *class);
 	return 0;
 }
 
 /**
- *	ata_bmdma_error_handler - Stock error handler for BMDMA controller
+ *	ata_sff_error_handler - Stock error handler for BMDMA controller
  *	@ap: port to handle error for
  *
- *	Stock error handler for BMDMA controller.  It can handle both
+ *	Stock error handler for SFF controller.  It can handle both
  *	PATA and SATA controllers.  Many controllers should be able to
  *	use this EH as-is or with some added handling before and
  *	after.
@@ -1997,7 +1997,7 @@ int sata_std_hardreset(struct ata_link *link, unsigned int *class,
  *	LOCKING:
  *	Kernel thread context (may sleep)
  */
-void ata_bmdma_error_handler(struct ata_port *ap)
+void ata_sff_error_handler(struct ata_port *ap)
 {
 	ata_reset_fn_t softreset = ap->ops->softreset;
 	ata_reset_fn_t hardreset = ap->ops->hardreset;
@@ -2034,7 +2034,7 @@ void ata_bmdma_error_handler(struct ata_port *ap)
 		ap->ops->bmdma_stop(qc);
 	}
 
-	ata_altstatus(ap);
+	ata_sff_altstatus(ap);
 	ap->ops->check_status(ap);
 	ap->ops->irq_clear(ap);
 
@@ -2045,14 +2045,14 @@ void ata_bmdma_error_handler(struct ata_port *ap)
 
 	/* PIO and DMA engines have been stopped, perform recovery */
 
-	/* ata_std_softreset and sata_std_hardreset are inherited to
+	/* ata_sff_softreset and sata_sff_hardreset are inherited to
 	 * all SFF drivers from ata_sff_port_ops.  Ignore softreset if
 	 * ctl isn't accessible.  Ignore hardreset if SCR access isn't
 	 * available.
 	 */
-	if (softreset == ata_std_softreset && !ap->ioaddr.ctl_addr)
+	if (softreset == ata_sff_softreset && !ap->ioaddr.ctl_addr)
 		softreset = NULL;
-	if (hardreset == sata_std_hardreset && !sata_scr_valid(&ap->link))
+	if (hardreset == sata_sff_hardreset && !sata_scr_valid(&ap->link))
 		hardreset = NULL;
 
 	ata_do_eh(ap, ap->ops->prereset, softreset, hardreset,
@@ -2060,14 +2060,13 @@ void ata_bmdma_error_handler(struct ata_port *ap)
 }
 
 /**
- *	ata_bmdma_post_internal_cmd - Stock post_internal_cmd for
- *				      BMDMA controller
+ *	ata_sff_post_internal_cmd - Stock post_internal_cmd for SFF controller
  *	@qc: internal command to clean up
  *
  *	LOCKING:
  *	Kernel thread context (may sleep)
  */
-void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc)
+void ata_sff_post_internal_cmd(struct ata_queued_cmd *qc)
 {
 	if (qc->ap->ioaddr.bmdma_addr)
 		ata_bmdma_stop(qc);
@@ -2094,7 +2093,7 @@ int ata_sff_port_start(struct ata_port *ap)
 }
 
 /**
- *	ata_std_ports - initialize ioaddr with standard port offsets.
+ *	ata_sff_std_ports - initialize ioaddr with standard port offsets.
  *	@ioaddr: IO address structure to be initialized
  *
  *	Utility function which initializes data_addr, error_addr,
@@ -2104,7 +2103,7 @@ int ata_sff_port_start(struct ata_port *ap)
  *
  *	Does not set ctl_addr, altstatus_addr, bmdma_addr, or scr_addr.
  */
-void ata_std_ports(struct ata_ioports *ioaddr)
+void ata_sff_std_ports(struct ata_ioports *ioaddr)
 {
 	ioaddr->data_addr = ioaddr->cmd_addr + ATA_REG_DATA;
 	ioaddr->error_addr = ioaddr->cmd_addr + ATA_REG_ERR;
@@ -2118,7 +2117,8 @@ void ata_std_ports(struct ata_ioports *ioaddr)
 	ioaddr->command_addr = ioaddr->cmd_addr + ATA_REG_CMD;
 }
 
-unsigned long ata_pci_default_filter(struct ata_device *adev, unsigned long xfer_mask)
+unsigned long ata_bmdma_mode_filter(struct ata_device *adev,
+				    unsigned long xfer_mask)
 {
 	/* Filter out DMA modes if the device has been configured by
 	   the BIOS as PIO only */
@@ -2209,7 +2209,7 @@ void ata_bmdma_stop(struct ata_queued_cmd *qc)
 		 mmio + ATA_DMA_CMD);
 
 	/* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
-	ata_altstatus(ap);        /* dummy read */
+	ata_sff_altstatus(ap);        /* dummy read */
 }
 
 /**
@@ -2289,9 +2289,9 @@ void ata_bus_reset(struct ata_port *ap)
 	/*
 	 * determine by signature whether we have ATA or ATAPI devices
 	 */
-	device[0].class = ata_dev_try_classify(&device[0], dev0, &err);
+	device[0].class = ata_sff_dev_classify(&device[0], dev0, &err);
 	if ((slave_possible) && (err != 0x81))
-		device[1].class = ata_dev_try_classify(&device[1], dev1, &err);
+		device[1].class = ata_sff_dev_classify(&device[1], dev1, &err);
 
 	/* is double-select really necessary? */
 	if (device[1].class != ATA_DEV_NONE)
@@ -2322,7 +2322,7 @@ err_out:
 #ifdef CONFIG_PCI
 
 /**
- *	ata_pci_clear_simplex	-	attempt to kick device out of simplex
+ *	ata_pci_bmdma_clear_simplex -	attempt to kick device out of simplex
  *	@pdev: PCI device
  *
  *	Some PCI ATA devices report simplex mode but in fact can be told to
@@ -2330,7 +2330,7 @@ err_out:
  *	perform the task on such devices. Calling it on other devices will
  *	have -undefined- behaviour.
  */
-int ata_pci_clear_simplex(struct pci_dev *pdev)
+int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev)
 {
 	unsigned long bmdma = pci_resource_start(pdev, 4);
 	u8 simplex;
@@ -2347,7 +2347,7 @@ int ata_pci_clear_simplex(struct pci_dev *pdev)
 }
 
 /**
- *	ata_pci_init_bmdma - acquire PCI BMDMA resources and init ATA host
+ *	ata_pci_bmdma_init - acquire PCI BMDMA resources and init ATA host
  *	@host: target ATA host
  *
  *	Acquire PCI BMDMA resources and initialize @host accordingly.
@@ -2358,7 +2358,7 @@ int ata_pci_clear_simplex(struct pci_dev *pdev)
  *	RETURNS:
  *	0 on success, -errno otherwise.
  */
-int ata_pci_init_bmdma(struct ata_host *host)
+int ata_pci_bmdma_init(struct ata_host *host)
 {
 	struct device *gdev = host->dev;
 	struct pci_dev *pdev = to_pci_dev(gdev);
@@ -2418,7 +2418,7 @@ static int ata_resources_present(struct pci_dev *pdev, int port)
 }
 
 /**
- *	ata_pci_init_sff_host - acquire native PCI ATA resources and init host
+ *	ata_pci_sff_init_host - acquire native PCI ATA resources and init host
  *	@host: target ATA host
  *
  *	Acquire native PCI ATA resources for @host and initialize the
@@ -2436,7 +2436,7 @@ static int ata_resources_present(struct pci_dev *pdev, int port)
  *	0 if at least one port is initialized, -ENODEV if no port is
  *	available.
  */
-int ata_pci_init_sff_host(struct ata_host *host)
+int ata_pci_sff_init_host(struct ata_host *host)
 {
 	struct device *gdev = host->dev;
 	struct pci_dev *pdev = to_pci_dev(gdev);
@@ -2478,7 +2478,7 @@ int ata_pci_init_sff_host(struct ata_host *host)
 		ap->ioaddr.altstatus_addr =
 		ap->ioaddr.ctl_addr = (void __iomem *)
 			((unsigned long)iomap[base + 1] | ATA_PCI_CTL_OFS);
-		ata_std_ports(&ap->ioaddr);
+		ata_sff_std_ports(&ap->ioaddr);
 
 		ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx",
 			(unsigned long long)pci_resource_start(pdev, base),
@@ -2496,7 +2496,7 @@ int ata_pci_init_sff_host(struct ata_host *host)
 }
 
 /**
- *	ata_pci_prepare_sff_host - helper to prepare native PCI ATA host
+ *	ata_pci_sff_prepare_host - helper to prepare native PCI ATA host
  *	@pdev: target PCI device
  *	@ppi: array of port_info, must be enough for two ports
  *	@r_host: out argument for the initialized ATA host
@@ -2510,7 +2510,7 @@ int ata_pci_init_sff_host(struct ata_host *host)
  *	RETURNS:
  *	0 on success, -errno otherwise.
  */
-int ata_pci_prepare_sff_host(struct pci_dev *pdev,
+int ata_pci_sff_prepare_host(struct pci_dev *pdev,
 			     const struct ata_port_info * const * ppi,
 			     struct ata_host **r_host)
 {
@@ -2528,12 +2528,12 @@ int ata_pci_prepare_sff_host(struct pci_dev *pdev,
 		goto err_out;
 	}
 
-	rc = ata_pci_init_sff_host(host);
+	rc = ata_pci_sff_init_host(host);
 	if (rc)
 		goto err_out;
 
 	/* init DMA related stuff */
-	rc = ata_pci_init_bmdma(host);
+	rc = ata_pci_bmdma_init(host);
 	if (rc)
 		goto err_bmdma;
 
@@ -2554,7 +2554,7 @@ int ata_pci_prepare_sff_host(struct pci_dev *pdev,
 }
 
 /**
- *	ata_pci_activate_sff_host - start SFF host, request IRQ and register it
+ *	ata_pci_sff_activate_host - start SFF host, request IRQ and register it
  *	@host: target SFF ATA host
  *	@irq_handler: irq_handler used when requesting IRQ(s)
  *	@sht: scsi_host_template to use when registering the host
@@ -2569,7 +2569,7 @@ int ata_pci_prepare_sff_host(struct pci_dev *pdev,
  *	RETURNS:
  *	0 on success, -errno otherwise.
  */
-int ata_pci_activate_sff_host(struct ata_host *host,
+int ata_pci_sff_activate_host(struct ata_host *host,
 			      irq_handler_t irq_handler,
 			      struct scsi_host_template *sht)
 {
@@ -2647,7 +2647,7 @@ int ata_pci_activate_sff_host(struct ata_host *host,
 }
 
 /**
- *	ata_pci_init_one - Initialize/register PCI IDE host controller
+ *	ata_pci_sff_init_one - Initialize/register PCI IDE host controller
  *	@pdev: Controller to be initialized
  *	@ppi: array of port_info, must be enough for two ports
  *	@sht: scsi_host_template to use when registering the host
@@ -2671,9 +2671,9 @@ int ata_pci_activate_sff_host(struct ata_host *host,
  *	RETURNS:
  *	Zero on success, negative on errno-based value on error.
  */
-int ata_pci_init_one(struct pci_dev *pdev,
-		     const struct ata_port_info * const * ppi,
-		     struct scsi_host_template *sht, void *host_priv)
+int ata_pci_sff_init_one(struct pci_dev *pdev,
+			 const struct ata_port_info * const * ppi,
+			 struct scsi_host_template *sht, void *host_priv)
 {
 	struct device *dev = &pdev->dev;
 	const struct ata_port_info *pi = NULL;
@@ -2704,13 +2704,13 @@ int ata_pci_init_one(struct pci_dev *pdev,
 		goto out;
 
 	/* prepare and activate SFF host */
-	rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
+	rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
 	if (rc)
 		goto out;
 	host->private_data = host_priv;
 
 	pci_set_master(pdev);
-	rc = ata_pci_activate_sff_host(host, ata_interrupt, sht);
+	rc = ata_pci_sff_activate_host(host, ata_sff_interrupt, sht);
  out:
 	if (rc == 0)
 		devres_remove_group(&pdev->dev, NULL);
@@ -2724,47 +2724,47 @@ int ata_pci_init_one(struct pci_dev *pdev,
 
 EXPORT_SYMBOL_GPL(ata_sff_port_ops);
 EXPORT_SYMBOL_GPL(ata_bmdma_port_ops);
-EXPORT_SYMBOL_GPL(ata_qc_prep);
-EXPORT_SYMBOL_GPL(ata_dumb_qc_prep);
-EXPORT_SYMBOL_GPL(ata_std_dev_select);
-EXPORT_SYMBOL_GPL(ata_check_status);
-EXPORT_SYMBOL_GPL(ata_altstatus);
-EXPORT_SYMBOL_GPL(ata_busy_sleep);
-EXPORT_SYMBOL_GPL(ata_wait_ready);
-EXPORT_SYMBOL_GPL(ata_tf_load);
-EXPORT_SYMBOL_GPL(ata_tf_read);
-EXPORT_SYMBOL_GPL(ata_exec_command);
-EXPORT_SYMBOL_GPL(ata_data_xfer);
-EXPORT_SYMBOL_GPL(ata_data_xfer_noirq);
-EXPORT_SYMBOL_GPL(ata_irq_on);
-EXPORT_SYMBOL_GPL(ata_bmdma_irq_clear);
-EXPORT_SYMBOL_GPL(ata_hsm_move);
-EXPORT_SYMBOL_GPL(ata_qc_issue_prot);
-EXPORT_SYMBOL_GPL(ata_host_intr);
-EXPORT_SYMBOL_GPL(ata_interrupt);
-EXPORT_SYMBOL_GPL(ata_bmdma_freeze);
-EXPORT_SYMBOL_GPL(ata_bmdma_thaw);
-EXPORT_SYMBOL_GPL(ata_std_prereset);
-EXPORT_SYMBOL_GPL(ata_dev_try_classify);
-EXPORT_SYMBOL_GPL(ata_wait_after_reset);
-EXPORT_SYMBOL_GPL(ata_std_softreset);
-EXPORT_SYMBOL_GPL(sata_std_hardreset);
-EXPORT_SYMBOL_GPL(ata_std_postreset);
-EXPORT_SYMBOL_GPL(ata_bmdma_error_handler);
-EXPORT_SYMBOL_GPL(ata_bmdma_post_internal_cmd);
+EXPORT_SYMBOL_GPL(ata_sff_qc_prep);
+EXPORT_SYMBOL_GPL(ata_sff_dumb_qc_prep);
+EXPORT_SYMBOL_GPL(ata_sff_dev_select);
+EXPORT_SYMBOL_GPL(ata_sff_check_status);
+EXPORT_SYMBOL_GPL(ata_sff_altstatus);
+EXPORT_SYMBOL_GPL(ata_sff_busy_sleep);
+EXPORT_SYMBOL_GPL(ata_sff_wait_ready);
+EXPORT_SYMBOL_GPL(ata_sff_tf_load);
+EXPORT_SYMBOL_GPL(ata_sff_tf_read);
+EXPORT_SYMBOL_GPL(ata_sff_exec_command);
+EXPORT_SYMBOL_GPL(ata_sff_data_xfer);
+EXPORT_SYMBOL_GPL(ata_sff_data_xfer_noirq);
+EXPORT_SYMBOL_GPL(ata_sff_irq_on);
+EXPORT_SYMBOL_GPL(ata_sff_irq_clear);
+EXPORT_SYMBOL_GPL(ata_sff_hsm_move);
+EXPORT_SYMBOL_GPL(ata_sff_qc_issue);
+EXPORT_SYMBOL_GPL(ata_sff_host_intr);
+EXPORT_SYMBOL_GPL(ata_sff_interrupt);
+EXPORT_SYMBOL_GPL(ata_sff_freeze);
+EXPORT_SYMBOL_GPL(ata_sff_thaw);
+EXPORT_SYMBOL_GPL(ata_sff_prereset);
+EXPORT_SYMBOL_GPL(ata_sff_dev_classify);
+EXPORT_SYMBOL_GPL(ata_sff_wait_after_reset);
+EXPORT_SYMBOL_GPL(ata_sff_softreset);
+EXPORT_SYMBOL_GPL(sata_sff_hardreset);
+EXPORT_SYMBOL_GPL(ata_sff_postreset);
+EXPORT_SYMBOL_GPL(ata_sff_error_handler);
+EXPORT_SYMBOL_GPL(ata_sff_post_internal_cmd);
 EXPORT_SYMBOL_GPL(ata_sff_port_start);
-EXPORT_SYMBOL_GPL(ata_std_ports);
-EXPORT_SYMBOL_GPL(ata_pci_default_filter);
+EXPORT_SYMBOL_GPL(ata_sff_std_ports);
+EXPORT_SYMBOL_GPL(ata_bmdma_mode_filter);
 EXPORT_SYMBOL_GPL(ata_bmdma_setup);
 EXPORT_SYMBOL_GPL(ata_bmdma_start);
 EXPORT_SYMBOL_GPL(ata_bmdma_stop);
 EXPORT_SYMBOL_GPL(ata_bmdma_status);
 EXPORT_SYMBOL_GPL(ata_bus_reset);
 #ifdef CONFIG_PCI
-EXPORT_SYMBOL_GPL(ata_pci_clear_simplex);
-EXPORT_SYMBOL_GPL(ata_pci_init_bmdma);
-EXPORT_SYMBOL_GPL(ata_pci_init_sff_host);
-EXPORT_SYMBOL_GPL(ata_pci_prepare_sff_host);
-EXPORT_SYMBOL_GPL(ata_pci_activate_sff_host);
-EXPORT_SYMBOL_GPL(ata_pci_init_one);
+EXPORT_SYMBOL_GPL(ata_pci_bmdma_clear_simplex);
+EXPORT_SYMBOL_GPL(ata_pci_bmdma_init);
+EXPORT_SYMBOL_GPL(ata_pci_sff_init_host);
+EXPORT_SYMBOL_GPL(ata_pci_sff_prepare_host);
+EXPORT_SYMBOL_GPL(ata_pci_sff_activate_host);
+EXPORT_SYMBOL_GPL(ata_pci_sff_init_one);
 #endif /* CONFIG_PCI */
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index d337f3209caf..c5f91e629945 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -47,7 +47,7 @@ static int pacpi_pre_reset(struct ata_link *link, unsigned long deadline)
 	if (ap->acpi_handle == NULL || ata_acpi_gtm(ap, &acpi->gtm) < 0)
 		return -ENODEV;
 
-	return ata_std_prereset(link, deadline);
+	return ata_sff_prereset(link, deadline);
 }
 
 /**
@@ -106,7 +106,7 @@ static unsigned long pacpi_discover_modes(struct ata_port *ap, struct ata_device
 static unsigned long pacpi_mode_filter(struct ata_device *adev, unsigned long mask)
 {
 	struct pata_acpi *acpi = adev->link->ap->private_data;
-	return ata_pci_default_filter(adev, mask & acpi->mask[adev->devno]);
+	return ata_bmdma_mode_filter(adev, mask & acpi->mask[adev->devno]);
 }
 
 /**
@@ -162,7 +162,7 @@ static void pacpi_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 }
 
 /**
- *	pacpi_qc_issue_prot	-	command issue
+ *	pacpi_qc_issue	-	command issue
  *	@qc: command pending
  *
  *	Called when the libata layer is about to issue a command. We wrap
@@ -170,14 +170,14 @@ static void pacpi_set_dmamode(struct ata_port *ap, struct ata_device *adev)
  *	neccessary.
  */
 
-static unsigned int pacpi_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int pacpi_qc_issue(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
 	struct ata_device *adev = qc->dev;
 	struct pata_acpi *acpi = ap->private_data;
 
 	if (acpi->gtm.flags & 0x10)
-		return ata_qc_issue_prot(qc);
+		return ata_sff_qc_issue(qc);
 
 	if (adev != acpi->last) {
 		pacpi_set_piomode(ap, adev);
@@ -185,7 +185,7 @@ static unsigned int pacpi_qc_issue_prot(struct ata_queued_cmd *qc)
 			pacpi_set_dmamode(ap, adev);
 		acpi->last = adev;
 	}
-	return ata_qc_issue_prot(qc);
+	return ata_sff_qc_issue(qc);
 }
 
 /**
@@ -223,7 +223,7 @@ static struct scsi_host_template pacpi_sht = {
 
 static struct ata_port_operations pacpi_ops = {
 	.inherits		= &ata_bmdma_port_ops,
-	.qc_issue		= pacpi_qc_issue_prot,
+	.qc_issue		= pacpi_qc_issue,
 	.cable_detect		= pacpi_cable_detect,
 	.mode_filter		= pacpi_mode_filter,
 	.set_piomode		= pacpi_set_piomode,
@@ -259,7 +259,7 @@ static int pacpi_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
 		.port_ops	= &pacpi_ops,
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
-	return ata_pci_init_one(pdev, ppi, &pacpi_sht, NULL);
+	return ata_pci_sff_init_one(pdev, ppi, &pacpi_sht, NULL);
 }
 
 static const struct pci_device_id pacpi_pci_tbl[] = {
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index 43c558f20f92..fcabe46f262b 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -121,7 +121,7 @@ static unsigned long ali_20_filter(struct ata_device *adev, unsigned long mask)
 	ata_id_c_string(adev->id, model_num, ATA_ID_PROD, sizeof(model_num));
 	if (strstr(model_num, "WDC"))
 		return mask &= ~ATA_MASK_UDMA;
-	return ata_pci_default_filter(adev, mask);
+	return ata_bmdma_mode_filter(adev, mask);
 }
 
 /**
@@ -449,7 +449,7 @@ static void ali_init_chipset(struct pci_dev *pdev)
 	}
 	pci_dev_put(isa_bridge);
 	pci_dev_put(north);
-	ata_pci_clear_simplex(pdev);
+	ata_pci_bmdma_clear_simplex(pdev);
 }
 /**
  *	ali_init_one		-	discovery callback
@@ -552,7 +552,7 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	        	ppi[0] = &info_20_udma;
 		pci_dev_put(isa_bridge);
 	}
-	return ata_pci_init_one(pdev, ppi, &ali_sht, NULL);
+	return ata_pci_sff_init_one(pdev, ppi, &ali_sht, NULL);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 33074c34105c..26665c396485 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -143,7 +143,7 @@ static int amd_pre_reset(struct ata_link *link, unsigned long deadline)
 	if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no]))
 		return -ENOENT;
 
-	return ata_std_prereset(link, deadline);
+	return ata_sff_prereset(link, deadline);
 }
 
 static int amd_cable_detect(struct ata_port *ap)
@@ -293,7 +293,7 @@ static int nv_pre_reset(struct ata_link *link, unsigned long deadline)
 	if (!pci_test_config_bits(pdev, &nv_enable_bits[ap->port_no]))
 		return -ENOENT;
 
-	return ata_std_prereset(link, deadline);
+	return ata_sff_prereset(link, deadline);
 }
 
 /**
@@ -503,7 +503,7 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	ppi[0] = &info[type];
 
 	if (type < 3)
-		ata_pci_clear_simplex(pdev);
+		ata_pci_bmdma_clear_simplex(pdev);
 
 	/* Check for AMD7411 */
 	if (type == 3)
@@ -523,7 +523,7 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	}
 
 	/* And fire it up */
-	return ata_pci_init_one(pdev, ppi, &amd_sht, hpriv);
+	return ata_pci_sff_init_one(pdev, ppi, &amd_sht, hpriv);
 }
 
 #ifdef CONFIG_PM
@@ -546,7 +546,7 @@ static int amd_reinit_one(struct pci_dev *pdev)
 			pci_write_config_byte(pdev, 0x41, fifo | 0xF0);
 		if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7409 ||
 		    pdev->device == PCI_DEVICE_ID_AMD_COBRA_7401)
-		    	ata_pci_clear_simplex(pdev);
+			ata_pci_bmdma_clear_simplex(pdev);
 	}
 
 	ata_host_resume(host);
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index b6d8c4d0e6c2..0f513bc11193 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -52,7 +52,7 @@ static int artop6210_pre_reset(struct ata_link *link, unsigned long deadline)
 	if (!pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no]))
 		return -ENOENT;
 
-	return ata_std_prereset(link, deadline);
+	return ata_sff_prereset(link, deadline);
 }
 
 /**
@@ -78,7 +78,7 @@ static int artop6260_pre_reset(struct ata_link *link, unsigned long deadline)
 	if (pdev->device % 1 && !pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no]))
 		return -ENOENT;
 
-	return ata_std_prereset(link, deadline);
+	return ata_sff_prereset(link, deadline);
 }
 
 /**
@@ -400,7 +400,7 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
 
 	BUG_ON(ppi[0] == NULL);
 
-	return ata_pci_init_one(pdev, ppi, &artop_sht, NULL);
+	return ata_pci_sff_init_one(pdev, ppi, &artop_sht, NULL);
 }
 
 static const struct pci_device_id artop_pci_tbl[] = {
diff --git a/drivers/ata/pata_at32.c b/drivers/ata/pata_at32.c
index 528315587532..3e8651d78952 100644
--- a/drivers/ata/pata_at32.c
+++ b/drivers/ata/pata_at32.c
@@ -223,7 +223,7 @@ static int __init pata_at32_init_one(struct device *dev,
 	host->private_data = info;
 
 	/* Register ATA device and return */
-	return ata_host_activate(host, info->irq, ata_interrupt,
+	return ata_host_activate(host, info->irq, ata_sff_interrupt,
 				 IRQF_SHARED | IRQF_TRIGGER_RISING,
 				 &at32_sht);
 }
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index 56a65baddd4a..78738fb4223b 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -45,7 +45,7 @@ static int atiixp_pre_reset(struct ata_link *link, unsigned long deadline)
 	if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no]))
 		return -ENOENT;
 
-	return ata_std_prereset(link, deadline);
+	return ata_sff_prereset(link, deadline);
 }
 
 static int atiixp_cable_detect(struct ata_port *ap)
@@ -223,7 +223,7 @@ static struct scsi_host_template atiixp_sht = {
 static struct ata_port_operations atiixp_port_ops = {
 	.inherits	= &ata_bmdma_port_ops,
 
-	.qc_prep 	= ata_dumb_qc_prep,
+	.qc_prep 	= ata_sff_dumb_qc_prep,
 	.bmdma_start 	= atiixp_bmdma_start,
 	.bmdma_stop	= atiixp_bmdma_stop,
 
@@ -243,7 +243,7 @@ static int atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 		.port_ops = &atiixp_port_ops
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
-	return ata_pci_init_one(dev, ppi, &atiixp_sht, NULL);
+	return ata_pci_sff_init_one(dev, ppi, &atiixp_sht, NULL);
 }
 
 static const struct pci_device_id atiixp[] = {
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index 457ac800cd5e..c854e882d4a9 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -674,7 +674,7 @@ static void read_atapi_data(void __iomem *base,
  *	@ap: Port to which output is sent
  *	@tf: ATA taskfile register set
  *
- *	Note: Original code is ata_tf_load().
+ *	Note: Original code is ata_sff_tf_load().
  */
 
 static void bfin_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
@@ -745,7 +745,7 @@ static u8 bfin_check_status(struct ata_port *ap)
  *	@ap: Port from which input is read
  *	@tf: ATA taskfile register set for storing input
  *
- *	Note: Original code is ata_tf_read().
+ *	Note: Original code is ata_sff_tf_read().
  */
 
 static void bfin_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
@@ -775,7 +775,7 @@ static void bfin_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
  *	@ap: port to which command is being issued
  *	@tf: ATA taskfile register set
  *
- *	Note: Original code is ata_exec_command().
+ *	Note: Original code is ata_sff_exec_command().
  */
 
 static void bfin_exec_command(struct ata_port *ap,
@@ -785,7 +785,7 @@ static void bfin_exec_command(struct ata_port *ap,
 	dev_dbg(ap->dev, "ata%u: cmd 0x%X\n", ap->print_id, tf->command);
 
 	write_atapi_register(base, ATA_REG_CMD, tf->command);
-	ata_pause(ap);
+	ata_sff_pause(ap);
 }
 
 /**
@@ -800,14 +800,14 @@ static u8 bfin_check_altstatus(struct ata_port *ap)
 }
 
 /**
- *	bfin_std_dev_select - Select device 0/1 on ATA bus
+ *	bfin_dev_select - Select device 0/1 on ATA bus
  *	@ap: ATA channel to manipulate
  *	@device: ATA device (numbered from zero) to select
  *
- *	Note: Original code is ata_std_dev_select().
+ *	Note: Original code is ata_sff_dev_select().
  */
 
-static void bfin_std_dev_select(struct ata_port *ap, unsigned int device)
+static void bfin_dev_select(struct ata_port *ap, unsigned int device)
 {
 	void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
 	u8 tmp;
@@ -818,7 +818,7 @@ static void bfin_std_dev_select(struct ata_port *ap, unsigned int device)
 		tmp = ATA_DEVICE_OBS | ATA_DEV1;
 
 	write_atapi_register(base, ATA_REG_DEVICE, tmp);
-	ata_pause(ap);
+	ata_sff_pause(ap);
 }
 
 /**
@@ -977,7 +977,7 @@ static unsigned int bfin_devchk(struct ata_port *ap,
 	void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
 	u8 nsect, lbal;
 
-	bfin_std_dev_select(ap, device);
+	bfin_dev_select(ap, device);
 
 	write_atapi_register(base, ATA_REG_NSECT, 0x55);
 	write_atapi_register(base, ATA_REG_LBAL, 0xaa);
@@ -1014,7 +1014,7 @@ static void bfin_bus_post_reset(struct ata_port *ap, unsigned int devmask)
 	 * BSY bit to clear
 	 */
 	if (dev0)
-		ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
+		ata_sff_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
 
 	/* if device 1 was found in ata_devchk, wait for
 	 * register access, then wait for BSY to clear
@@ -1023,7 +1023,7 @@ static void bfin_bus_post_reset(struct ata_port *ap, unsigned int devmask)
 	while (dev1) {
 		u8 nsect, lbal;
 
-		bfin_std_dev_select(ap, 1);
+		bfin_dev_select(ap, 1);
 		nsect = read_atapi_register(base, ATA_REG_NSECT);
 		lbal = read_atapi_register(base, ATA_REG_LBAL);
 		if ((nsect == 1) && (lbal == 1))
@@ -1035,14 +1035,14 @@ static void bfin_bus_post_reset(struct ata_port *ap, unsigned int devmask)
 		msleep(50);	/* give drive a breather */
 	}
 	if (dev1)
-		ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
+		ata_sff_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
 
 	/* is all this really necessary? */
-	bfin_std_dev_select(ap, 0);
+	bfin_dev_select(ap, 0);
 	if (dev1)
-		bfin_std_dev_select(ap, 1);
+		bfin_dev_select(ap, 1);
 	if (dev0)
-		bfin_std_dev_select(ap, 0);
+		bfin_dev_select(ap, 0);
 }
 
 /**
@@ -1088,15 +1088,15 @@ static unsigned int bfin_bus_softreset(struct ata_port *ap,
 }
 
 /**
- *	bfin_std_softreset - reset host port via ATA SRST
+ *	bfin_softreset - reset host port via ATA SRST
  *	@ap: port to reset
  *	@classes: resulting classes of attached devices
  *
- *	Note: Original code is ata_std_softreset().
+ *	Note: Original code is ata_sff_softreset().
  */
 
-static int bfin_std_softreset(struct ata_link *link, unsigned int *classes,
-		unsigned long deadline)
+static int bfin_softreset(struct ata_link *link, unsigned int *classes,
+			  unsigned long deadline)
 {
 	struct ata_port *ap = link->ap;
 	unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
@@ -1115,7 +1115,7 @@ static int bfin_std_softreset(struct ata_link *link, unsigned int *classes,
 		devmask |= (1 << 1);
 
 	/* select device 0 again */
-	bfin_std_dev_select(ap, 0);
+	bfin_dev_select(ap, 0);
 
 	/* issue bus reset */
 	err_mask = bfin_bus_softreset(ap, devmask);
@@ -1126,10 +1126,10 @@ static int bfin_std_softreset(struct ata_link *link, unsigned int *classes,
 	}
 
 	/* determine by signature whether we have ATA or ATAPI devices */
-	classes[0] = ata_dev_try_classify(&ap->link.device[0],
+	classes[0] = ata_sff_dev_classify(&ap->link.device[0],
 				devmask & (1 << 0), &err);
 	if (slave_possible && err != 0x81)
-		classes[1] = ata_dev_try_classify(&ap->link.device[1],
+		classes[1] = ata_sff_dev_classify(&ap->link.device[1],
 					devmask & (1 << 1), &err);
 
  out:
@@ -1167,7 +1167,7 @@ static unsigned char bfin_bmdma_status(struct ata_port *ap)
  *	@buflen: buffer length
  *	@write_data: read/write
  *
- *	Note: Original code is ata_data_xfer().
+ *	Note: Original code is ata_sff_data_xfer().
  */
 
 static unsigned int bfin_data_xfer(struct ata_device *dev, unsigned char *buf,
@@ -1206,7 +1206,7 @@ static unsigned int bfin_data_xfer(struct ata_device *dev, unsigned char *buf,
  *	bfin_irq_clear - Clear ATAPI interrupt.
  *	@ap: Port associated with this ATA transaction.
  *
- *	Note: Original code is ata_bmdma_irq_clear().
+ *	Note: Original code is ata_sff_irq_clear().
  */
 
 static void bfin_irq_clear(struct ata_port *ap)
@@ -1223,7 +1223,7 @@ static void bfin_irq_clear(struct ata_port *ap)
  *	bfin_irq_on - Enable interrupts on a port.
  *	@ap: Port on which interrupts are enabled.
  *
- *	Note: Original code is ata_irq_on().
+ *	Note: Original code is ata_sff_irq_on().
  */
 
 static unsigned char bfin_irq_on(struct ata_port *ap)
@@ -1244,13 +1244,13 @@ static unsigned char bfin_irq_on(struct ata_port *ap)
 }
 
 /**
- *	bfin_bmdma_freeze - Freeze DMA controller port
+ *	bfin_freeze - Freeze DMA controller port
  *	@ap: port to freeze
  *
- *	Note: Original code is ata_bmdma_freeze().
+ *	Note: Original code is ata_sff_freeze().
  */
 
-static void bfin_bmdma_freeze(struct ata_port *ap)
+static void bfin_freeze(struct ata_port *ap)
 {
 	void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
 
@@ -1270,13 +1270,13 @@ static void bfin_bmdma_freeze(struct ata_port *ap)
 }
 
 /**
- *	bfin_bmdma_thaw - Thaw DMA controller port
+ *	bfin_thaw - Thaw DMA controller port
  *	@ap: port to thaw
  *
- *	Note: Original code is ata_bmdma_thaw().
+ *	Note: Original code is ata_sff_thaw().
  */
 
-void bfin_bmdma_thaw(struct ata_port *ap)
+void bfin_thaw(struct ata_port *ap)
 {
 	bfin_check_status(ap);
 	bfin_irq_clear(ap);
@@ -1284,14 +1284,14 @@ void bfin_bmdma_thaw(struct ata_port *ap)
 }
 
 /**
- *	bfin_std_postreset - standard postreset callback
+ *	bfin_postreset - standard postreset callback
  *	@ap: the target ata_port
  *	@classes: classes of attached devices
  *
- *	Note: Original code is ata_std_postreset().
+ *	Note: Original code is ata_sff_postreset().
  */
 
-static void bfin_std_postreset(struct ata_link *link, unsigned int *classes)
+static void bfin_postreset(struct ata_link *link, unsigned int *classes)
 {
 	struct ata_port *ap = link->ap;
 	void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
@@ -1301,9 +1301,9 @@ static void bfin_std_postreset(struct ata_link *link, unsigned int *classes)
 
 	/* is double-select really necessary? */
 	if (classes[0] != ATA_DEV_NONE)
-		bfin_std_dev_select(ap, 1);
+		bfin_dev_select(ap, 1);
 	if (classes[1] != ATA_DEV_NONE)
-		bfin_std_dev_select(ap, 0);
+		bfin_dev_select(ap, 0);
 
 	/* bail out if no device is present */
 	if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) {
@@ -1362,7 +1362,7 @@ static const struct ata_port_operations bfin_pata_ops = {
 	.exec_command		= bfin_exec_command,
 	.check_status		= bfin_check_status,
 	.check_altstatus	= bfin_check_altstatus,
-	.dev_select		= bfin_std_dev_select,
+	.dev_select		= bfin_dev_select,
 
 	.bmdma_setup		= bfin_bmdma_setup,
 	.bmdma_start		= bfin_bmdma_start,
@@ -1372,10 +1372,10 @@ static const struct ata_port_operations bfin_pata_ops = {
 
 	.qc_prep		= ata_noop_qc_prep,
 
-	.freeze			= bfin_bmdma_freeze,
-	.thaw			= bfin_bmdma_thaw,
-	.softreset		= bfin_std_softreset,
-	.postreset		= bfin_std_postreset,
+	.freeze			= bfin_freeze,
+	.thaw			= bfin_thaw,
+	.softreset		= bfin_softreset,
+	.postreset		= bfin_postreset,
 	.post_internal_cmd	= bfin_bmdma_stop,
 
 	.irq_clear		= bfin_irq_clear,
@@ -1513,7 +1513,7 @@ static int __devinit bfin_atapi_probe(struct platform_device *pdev)
 	}
 
 	if (ata_host_activate(host, platform_get_irq(pdev, 0),
-		ata_interrupt, IRQF_SHARED, &bfin_sht) != 0) {
+		ata_sff_interrupt, IRQF_SHARED, &bfin_sht) != 0) {
 		peripheral_free_list(atapi_io_port);
 		dev_err(&pdev->dev, "Fail to attach ATAPI device\n");
 		return -ENODEV;
diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c
index 27219b00edf4..a907cf478891 100644
--- a/drivers/ata/pata_cmd640.c
+++ b/drivers/ata/pata_cmd640.c
@@ -107,8 +107,8 @@ static void cmd640_set_piomode(struct ata_port *ap, struct ata_device *adev)
 		pci_write_config_byte(pdev, arttim + 1, (t.active << 4) | t.recover);
 	} else {
 		/* Save the shared timings for channel, they will be loaded
-		   by qc_issue_prot. Reloading the setup time is expensive
-		   so we keep a merged one loaded */
+		   by qc_issue. Reloading the setup time is expensive so we
+		   keep a merged one loaded */
 		pci_read_config_byte(pdev, ARTIM23, &reg);
 		reg &= 0x3F;
 		reg |= t.setup;
@@ -119,14 +119,14 @@ static void cmd640_set_piomode(struct ata_port *ap, struct ata_device *adev)
 
 
 /**
- *	cmd640_qc_issue_prot	-	command preparation hook
+ *	cmd640_qc_issue	-	command preparation hook
  *	@qc: Command to be issued
  *
  *	Channel 1 has shared timings. We must reprogram the
  *	clock each drive 2/3 switch we do.
  */
 
-static unsigned int cmd640_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int cmd640_qc_issue(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
 	struct ata_device *adev = qc->dev;
@@ -137,7 +137,7 @@ static unsigned int cmd640_qc_issue_prot(struct ata_queued_cmd *qc)
 		pci_write_config_byte(pdev, DRWTIM23, timing->reg58[adev->devno]);
 		timing->last = adev->devno;
 	}
-	return ata_qc_issue_prot(qc);
+	return ata_sff_qc_issue(qc);
 }
 
 /**
@@ -172,8 +172,8 @@ static struct scsi_host_template cmd640_sht = {
 static struct ata_port_operations cmd640_port_ops = {
 	.inherits	= &ata_bmdma_port_ops,
 	/* In theory xfer_noirq is not needed once we kill the prefetcher */
-	.data_xfer	= ata_data_xfer_noirq,
-	.qc_issue	= cmd640_qc_issue_prot,
+	.data_xfer	= ata_sff_data_xfer_noirq,
+	.qc_issue	= cmd640_qc_issue,
 	.cable_detect	= ata_cable_40wire,
 	.set_piomode	= cmd640_set_piomode,
 	.port_start	= cmd640_port_start,
@@ -224,7 +224,7 @@ static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	cmd640_hardware_init(pdev);
 
-	return ata_pci_init_one(pdev, ppi, &cmd640_sht, NULL);
+	return ata_pci_sff_init_one(pdev, ppi, &cmd640_sht, NULL);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index f0e566623614..ddd09b7d98c9 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -349,7 +349,7 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	class_rev &= 0xFF;
 
 	if (id->driver_data == 0)	/* 643 */
-		ata_pci_clear_simplex(pdev);
+		ata_pci_bmdma_clear_simplex(pdev);
 
 	if (pdev->device == PCI_DEVICE_ID_CMD_646) {
 		/* Does UDMA work ? */
@@ -373,7 +373,7 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	pci_write_config_byte(pdev, UDIDETCR0, 0xF0);
 #endif
 
-	return ata_pci_init_one(pdev, ppi, &cmd64x_sht, NULL);
+	return ata_pci_sff_init_one(pdev, ppi, &cmd64x_sht, NULL);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index 46d0ce32ee5a..1186bcd2781c 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -146,7 +146,7 @@ static struct scsi_host_template cs5520_sht = {
 
 static struct ata_port_operations cs5520_port_ops = {
 	.inherits		= &ata_bmdma_port_ops,
-	.qc_prep		= ata_dumb_qc_prep,
+	.qc_prep		= ata_sff_dumb_qc_prep,
 	.cable_detect		= ata_cable_40wire,
 	.set_piomode		= cs5520_set_piomode,
 	.set_dmamode		= cs5520_set_dmamode,
@@ -227,7 +227,7 @@ static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_devi
 	ioaddr->ctl_addr = iomap[1];
 	ioaddr->altstatus_addr = iomap[1];
 	ioaddr->bmdma_addr = iomap[4];
-	ata_std_ports(ioaddr);
+	ata_sff_std_ports(ioaddr);
 
 	ata_port_desc(host->ports[0],
 		      "cmd 0x%x ctl 0x%x", cmd_port[0], ctl_port[0]);
@@ -238,7 +238,7 @@ static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_devi
 	ioaddr->ctl_addr = iomap[3];
 	ioaddr->altstatus_addr = iomap[3];
 	ioaddr->bmdma_addr = iomap[4] + 8;
-	ata_std_ports(ioaddr);
+	ata_sff_std_ports(ioaddr);
 
 	ata_port_desc(host->ports[1],
 		      "cmd 0x%x ctl 0x%x", cmd_port[1], ctl_port[1]);
@@ -258,7 +258,7 @@ static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_devi
 			continue;
 
 		rc = devm_request_irq(&pdev->dev, irq[ap->port_no],
-				      ata_interrupt, 0, DRV_NAME, host);
+				      ata_sff_interrupt, 0, DRV_NAME, host);
 		if (rc)
 			return rc;
 
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index ac3ad55d7c3c..744beebaaf49 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -133,7 +133,7 @@ static void cs5530_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 }
 
 /**
- *	cs5530_qc_issue_prot	-	command issue
+ *	cs5530_qc_issue		-	command issue
  *	@qc: command pending
  *
  *	Called when the libata layer is about to issue a command. We wrap
@@ -142,7 +142,7 @@ static void cs5530_set_dmamode(struct ata_port *ap, struct ata_device *adev)
  *	one MWDMA/UDMA bit.
  */
 
-static unsigned int cs5530_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int cs5530_qc_issue(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
 	struct ata_device *adev = qc->dev;
@@ -157,7 +157,7 @@ static unsigned int cs5530_qc_issue_prot(struct ata_queued_cmd *qc)
 		    	cs5530_set_dmamode(ap, adev);
 	}
 
-	return ata_qc_issue_prot(qc);
+	return ata_sff_qc_issue(qc);
 }
 
 static struct scsi_host_template cs5530_sht = {
@@ -168,8 +168,8 @@ static struct scsi_host_template cs5530_sht = {
 static struct ata_port_operations cs5530_port_ops = {
 	.inherits	= &ata_bmdma_port_ops,
 
-	.qc_prep 	= ata_dumb_qc_prep,
-	.qc_issue	= cs5530_qc_issue_prot,
+	.qc_prep 	= ata_sff_dumb_qc_prep,
+	.qc_issue	= cs5530_qc_issue,
 
 	.cable_detect	= ata_cable_40wire,
 	.set_piomode	= cs5530_set_piomode,
@@ -325,7 +325,7 @@ static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		ppi[1] = &info_palmax_secondary;
 
 	/* Now kick off ATA set up */
-	return ata_pci_init_one(pdev, ppi, &cs5530_sht, NULL);
+	return ata_pci_sff_init_one(pdev, ppi, &cs5530_sht, NULL);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index 5c0762ebf58c..f1b6556f0483 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -199,7 +199,7 @@ static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	rdmsr(ATAC_CH0D1_PIO, timings, dummy);
 	if (CS5535_BAD_PIO(timings))
 		wrmsr(ATAC_CH0D1_PIO, 0xF7F4F7F4UL, 0);
-	return ata_pci_init_one(dev, ppi, &cs5535_sht, NULL);
+	return ata_pci_sff_init_one(dev, ppi, &cs5535_sht, NULL);
 }
 
 static const struct pci_device_id cs5535[] = {
diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c
index 2d34b9145dcb..73f8332cb679 100644
--- a/drivers/ata/pata_cs5536.c
+++ b/drivers/ata/pata_cs5536.c
@@ -261,7 +261,7 @@ static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 		return -ENODEV;
 	}
 
-	return ata_pci_init_one(dev, ppi, &cs5536_sht, NULL);
+	return ata_pci_sff_init_one(dev, ppi, &cs5536_sht, NULL);
 }
 
 static const struct pci_device_id cs5536[] = {
diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c
index ae14969e1dfe..a9c3218e22fd 100644
--- a/drivers/ata/pata_cypress.c
+++ b/drivers/ata/pata_cypress.c
@@ -136,7 +136,7 @@ static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *i
 	if (PCI_FUNC(pdev->devfn) != 1)
 		return -ENODEV;
 
-	return ata_pci_init_one(pdev, ppi, &cy82c693_sht, NULL);
+	return ata_pci_sff_init_one(pdev, ppi, &cy82c693_sht, NULL);
 }
 
 static const struct pci_device_id cy82c693[] = {
diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index 1d839a57068e..9fba82976ba6 100644
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -45,7 +45,7 @@ static int efar_pre_reset(struct ata_link *link, unsigned long deadline)
 	if (!pci_test_config_bits(pdev, &efar_enable_bits[ap->port_no]))
 		return -ENOENT;
 
-	return ata_std_prereset(link, deadline);
+	return ata_sff_prereset(link, deadline);
 }
 
 /**
@@ -262,7 +262,7 @@ static int efar_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 		dev_printk(KERN_DEBUG, &pdev->dev,
 			   "version " DRV_VERSION "\n");
 
-	return ata_pci_init_one(pdev, ppi, &efar_sht, NULL);
+	return ata_pci_sff_init_one(pdev, ppi, &efar_sht, NULL);
 }
 
 static const struct pci_device_id efar_pci_tbl[] = {
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index c2d4923d4db7..f2b83eabc7c7 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -184,7 +184,7 @@ static unsigned long hpt366_filter(struct ata_device *adev, unsigned long mask)
 		if (hpt_dma_blacklisted(adev, "UDMA4", bad_ata66_4))
 			mask &= ~(0xF0 << ATA_SHIFT_UDMA);
 	}
-	return ata_pci_default_filter(adev, mask);
+	return ata_bmdma_mode_filter(adev, mask);
 }
 
 /**
@@ -393,7 +393,7 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 			break;
 	}
 	/* Now kick off ATA set up */
-	return ata_pci_init_one(dev, ppi, &hpt36x_sht, hpriv);
+	return ata_pci_sff_init_one(dev, ppi, &hpt36x_sht, hpriv);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index c10fcd31418d..42163998de9a 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -283,7 +283,7 @@ static unsigned long hpt370_filter(struct ata_device *adev, unsigned long mask)
 		if (hpt_dma_blacklisted(adev, "UDMA100", bad_ata100_5))
 			mask &= ~(0xE0 << ATA_SHIFT_UDMA);
 	}
-	return ata_pci_default_filter(adev, mask);
+	return ata_bmdma_mode_filter(adev, mask);
 }
 
 /**
@@ -299,7 +299,7 @@ static unsigned long hpt370a_filter(struct ata_device *adev, unsigned long mask)
 		if (hpt_dma_blacklisted(adev, "UDMA100", bad_ata100_5))
 			mask &= ~(0xE0 << ATA_SHIFT_UDMA);
 	}
-	return ata_pci_default_filter(adev, mask);
+	return ata_bmdma_mode_filter(adev, mask);
 }
 
 /**
@@ -338,7 +338,7 @@ static int hpt37x_pre_reset(struct ata_link *link, unsigned long deadline)
 	pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
 	udelay(100);
 
-	return ata_std_prereset(link, deadline);
+	return ata_sff_prereset(link, deadline);
 }
 
 static int hpt374_fn1_pre_reset(struct ata_link *link, unsigned long deadline)
@@ -374,7 +374,7 @@ static int hpt374_fn1_pre_reset(struct ata_link *link, unsigned long deadline)
 	pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
 	udelay(100);
 
-	return ata_std_prereset(link, deadline);
+	return ata_sff_prereset(link, deadline);
 }
 
 /**
@@ -1019,7 +1019,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	}
 
 	/* Now kick off ATA set up */
-	return ata_pci_init_one(dev, ppi, &hpt37x_sht, private_data);
+	return ata_pci_sff_init_one(dev, ppi, &hpt37x_sht, private_data);
 }
 
 static const struct pci_device_id hpt37x[] = {
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index cd44ee3d3cc1..d5c9fd7b82bb 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -156,7 +156,7 @@ static int hpt3x2n_pre_reset(struct ata_link *link, unsigned long deadline)
 	pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
 	udelay(100);
 
-	return ata_std_prereset(link, deadline);
+	return ata_sff_prereset(link, deadline);
 }
 
 /**
@@ -308,7 +308,7 @@ static int hpt3x2n_use_dpll(struct ata_port *ap, int writing)
 	return 0;
 }
 
-static unsigned int hpt3x2n_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int hpt3x2n_qc_issue(struct ata_queued_cmd *qc)
 {
 	struct ata_taskfile *tf = &qc->tf;
 	struct ata_port *ap = qc->ap;
@@ -323,7 +323,7 @@ static unsigned int hpt3x2n_qc_issue_prot(struct ata_queued_cmd *qc)
 				hpt3x2n_set_clock(ap, 0x23);
 		}
 	}
-	return ata_qc_issue_prot(qc);
+	return ata_sff_qc_issue(qc);
 }
 
 static struct scsi_host_template hpt3x2n_sht = {
@@ -338,7 +338,7 @@ static struct ata_port_operations hpt3x2n_port_ops = {
 	.inherits	= &ata_bmdma_port_ops,
 
 	.bmdma_stop	= hpt3x2n_bmdma_stop,
-	.qc_issue	= hpt3x2n_qc_issue_prot,
+	.qc_issue	= hpt3x2n_qc_issue,
 
 	.cable_detect	= hpt3x2n_cable_detect,
 	.set_piomode	= hpt3x2n_set_piomode,
@@ -554,7 +554,7 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	}
 
 	/* Now kick off ATA set up */
-	return ata_pci_init_one(dev, ppi, &hpt3x2n_sht, hpriv);
+	return ata_pci_sff_init_one(dev, ppi, &hpt3x2n_sht, hpriv);
 }
 
 static const struct pci_device_id hpt3x2n[] = {
diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
index 8857d029ac2e..f11a320337c0 100644
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -202,15 +202,15 @@ static int hpt3x3_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		ioaddr->altstatus_addr =
 		ioaddr->ctl_addr = base + offset_ctl[i];
 		ioaddr->scr_addr = NULL;
-		ata_std_ports(ioaddr);
+		ata_sff_std_ports(ioaddr);
 		ioaddr->bmdma_addr = base + 8 * i;
 
 		ata_port_pbar_desc(ap, 4, -1, "ioport");
 		ata_port_pbar_desc(ap, 4, offset_cmd[i], "cmd");
 	}
 	pci_set_master(pdev);
-	return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
-				 &hpt3x3_sht);
+	return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+				 IRQF_SHARED, &hpt3x3_sht);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c
index 13d43e9dd279..52de9f908fb0 100644
--- a/drivers/ata/pata_icside.c
+++ b/drivers/ata/pata_icside.c
@@ -270,7 +270,7 @@ static void pata_icside_bmdma_stop(struct ata_queued_cmd *qc)
 	disable_dma(state->dma);
 
 	/* see ata_bmdma_stop */
-	ata_altstatus(ap);
+	ata_sff_altstatus(ap);
 }
 
 static u8 pata_icside_bmdma_status(struct ata_port *ap)
@@ -316,7 +316,7 @@ static void pata_icside_postreset(struct ata_link *link, unsigned int *classes)
 	struct pata_icside_state *state = ap->host->private_data;
 
 	if (classes[0] != ATA_DEV_NONE || classes[1] != ATA_DEV_NONE)
-		return ata_std_postreset(link, classes);
+		return ata_sff_postreset(link, classes);
 
 	state->port[ap->port_no].disabled = 1;
 
@@ -336,7 +336,7 @@ static struct ata_port_operations pata_icside_port_ops = {
 	.inherits		= &ata_sff_port_ops,
 	/* no need to build any PRD tables for DMA */
 	.qc_prep		= ata_noop_qc_prep,
-	.data_xfer		= ata_data_xfer_noirq,
+	.data_xfer		= ata_sff_data_xfer_noirq,
 	.bmdma_setup		= pata_icside_bmdma_setup,
 	.bmdma_start		= pata_icside_bmdma_start,
 	.bmdma_stop		= pata_icside_bmdma_stop,
@@ -481,7 +481,7 @@ static int __devinit pata_icside_add_ports(struct pata_icside_info *info)
 		pata_icside_setup_ioaddr(ap, info->base, info, info->port[i]);
 	}
 
-	return ata_host_activate(host, ec->irq, ata_interrupt, 0,
+	return ata_host_activate(host, ec->irq, ata_sff_interrupt, 0,
 				 &pata_icside_sht);
 }
 
diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c
index 085913ec6f68..6a111baab523 100644
--- a/drivers/ata/pata_isapnp.c
+++ b/drivers/ata/pata_isapnp.c
@@ -50,7 +50,7 @@ static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev
 
 	if (pnp_irq_valid(idev, 0)) {
 		irq = pnp_irq(idev, 0);
-		handler = ata_interrupt;
+		handler = ata_sff_interrupt;
 	}
 
 	/* allocate host */
@@ -78,7 +78,7 @@ static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev
 		ap->ioaddr.ctl_addr = ctl_addr;
 	}
 
-	ata_std_ports(&ap->ioaddr);
+	ata_sff_std_ports(&ap->ioaddr);
 
 	ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx",
 		      (unsigned long long)pnp_port_start(idev, 0),
diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c
index 84ab89e8a247..c113d7c079c8 100644
--- a/drivers/ata/pata_it8213.c
+++ b/drivers/ata/pata_it8213.c
@@ -40,7 +40,7 @@ static int it8213_pre_reset(struct ata_link *link, unsigned long deadline)
 	if (!pci_test_config_bits(pdev, &it8213_enable_bits[ap->port_no]))
 		return -ENOENT;
 
-	return ata_std_prereset(link, deadline);
+	return ata_sff_prereset(link, deadline);
 }
 
 /**
@@ -274,7 +274,7 @@ static int it8213_init_one (struct pci_dev *pdev, const struct pci_device_id *en
 		dev_printk(KERN_DEBUG, &pdev->dev,
 			   "version " DRV_VERSION "\n");
 
-	return ata_pci_init_one(pdev, ppi, &it8213_sht, NULL);
+	return ata_pci_sff_init_one(pdev, ppi, &it8213_sht, NULL);
 }
 
 static const struct pci_device_id it8213_pci_tbl[] = {
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 6a8a4ddf5bfe..88e37cfcfc4f 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -395,11 +395,11 @@ static void it821x_passthru_dev_select(struct ata_port *ap,
 		it821x_program(ap, adev, itdev->pio[adev->devno]);
 		itdev->last_device = device;
 	}
-	ata_std_dev_select(ap, device);
+	ata_sff_dev_select(ap, device);
 }
 
 /**
- *	it821x_smart_qc_issue_prot	-	wrap qc issue prot
+ *	it821x_smart_qc_issue		-	wrap qc issue prot
  *	@qc: command
  *
  *	Wrap the command issue sequence for the IT821x. We need to
@@ -407,7 +407,7 @@ static void it821x_passthru_dev_select(struct ata_port *ap,
  *	usual happenings kick off
  */
 
-static unsigned int it821x_smart_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int it821x_smart_qc_issue(struct ata_queued_cmd *qc)
 {
 	switch(qc->tf.command)
 	{
@@ -427,14 +427,14 @@ static unsigned int it821x_smart_qc_issue_prot(struct ata_queued_cmd *qc)
 		case ATA_CMD_ID_ATA:
 		/* Arguably should just no-op this one */
 		case ATA_CMD_SET_FEATURES:
-			return ata_qc_issue_prot(qc);
+			return ata_sff_qc_issue(qc);
 	}
 	printk(KERN_DEBUG "it821x: can't process command 0x%02X\n", qc->tf.command);
 	return AC_ERR_DEV;
 }
 
 /**
- *	it821x_passthru_qc_issue_prot	-	wrap qc issue prot
+ *	it821x_passthru_qc_issue	-	wrap qc issue prot
  *	@qc: command
  *
  *	Wrap the command issue sequence for the IT821x. We need to
@@ -442,10 +442,10 @@ static unsigned int it821x_smart_qc_issue_prot(struct ata_queued_cmd *qc)
  *	usual happenings kick off
  */
 
-static unsigned int it821x_passthru_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int it821x_passthru_qc_issue(struct ata_queued_cmd *qc)
 {
 	it821x_passthru_dev_select(qc->ap, qc->dev->devno);
-	return ata_qc_issue_prot(qc);
+	return ata_sff_qc_issue(qc);
 }
 
 /**
@@ -639,7 +639,7 @@ static struct ata_port_operations it821x_smart_port_ops = {
 	.inherits	= &ata_bmdma_port_ops,
 
 	.check_atapi_dma= it821x_check_atapi_dma,
-	.qc_issue	= it821x_smart_qc_issue_prot,
+	.qc_issue	= it821x_smart_qc_issue,
 
 	.cable_detect	= it821x_ident_hack,
 	.set_mode	= it821x_smart_set_mode,
@@ -655,7 +655,7 @@ static struct ata_port_operations it821x_passthru_port_ops = {
 	.dev_select 	= it821x_passthru_dev_select,
 	.bmdma_start 	= it821x_passthru_bmdma_start,
 	.bmdma_stop	= it821x_passthru_bmdma_stop,
-	.qc_issue	= it821x_passthru_qc_issue_prot,
+	.qc_issue	= it821x_passthru_qc_issue,
 
 	.cable_detect	= ata_cable_unknown,
 	.set_piomode	= it821x_passthru_set_piomode,
@@ -722,7 +722,7 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	else
 		ppi[0] = &info_smart;
 
-	return ata_pci_init_one(pdev, ppi, &it821x_sht, NULL);
+	return ata_pci_sff_init_one(pdev, ppi, &it821x_sht, NULL);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index d02629aa20da..283a8fba79b3 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -110,7 +110,7 @@ static void ixp4xx_setup_port(struct ata_port *ap,
 	ioaddr->altstatus_addr	= data->cs1 + 0x06;
 	ioaddr->ctl_addr	= data->cs1 + 0x06;
 
-	ata_std_ports(ioaddr);
+	ata_sff_std_ports(ioaddr);
 
 #ifndef __ARMEB__
 
@@ -186,7 +186,7 @@ static __devinit int ixp4xx_pata_probe(struct platform_device *pdev)
 	dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
 
 	/* activate host */
-	return ata_host_activate(host, irq, ata_interrupt, 0, &ixp4xx_sht);
+	return ata_host_activate(host, irq, ata_sff_interrupt, 0, &ixp4xx_sht);
 }
 
 static __devexit int ixp4xx_pata_remove(struct platform_device *dev)
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 317f3474e0ba..73b7596816b4 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -102,7 +102,7 @@ static int jmicron_pre_reset(struct ata_link *link, unsigned long deadline)
 		ap->cbl = ATA_CBL_SATA;
 		break;
 	}
-	return ata_std_prereset(link, deadline);
+	return ata_sff_prereset(link, deadline);
 }
 
 /* No PIO or DMA methods needed for this device */
@@ -144,7 +144,7 @@ static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *i
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
 
-	return ata_pci_init_one(pdev, ppi, &jmicron_sht, NULL);
+	return ata_pci_sff_init_one(pdev, ppi, &jmicron_sht, NULL);
 }
 
 static const struct pci_device_id jmicron_pci_tbl[] = {
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index 2474068596f4..f13f10a55ef3 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -226,12 +226,12 @@ static const struct ata_port_operations legacy_base_port_ops = {
 
 static struct ata_port_operations simple_port_ops = {
 	.inherits	= &legacy_base_port_ops,
-	.data_xfer	= ata_data_xfer_noirq,
+	.data_xfer	= ata_sff_data_xfer_noirq,
 };
 
 static struct ata_port_operations legacy_port_ops = {
 	.inherits	= &legacy_base_port_ops,
-	.data_xfer	= ata_data_xfer_noirq,
+	.data_xfer	= ata_sff_data_xfer_noirq,
 	.set_mode	= legacy_set_mode,
 };
 
@@ -317,7 +317,7 @@ static unsigned int pdc_data_xfer_vlb(struct ata_device *dev,
 		}
 		local_irq_restore(flags);
 	} else
-		buflen = ata_data_xfer_noirq(dev, buf, buflen, rw);
+		buflen = ata_sff_data_xfer_noirq(dev, buf, buflen, rw);
 
 	return buflen;
 }
@@ -579,7 +579,7 @@ static void opti82c46x_set_piomode(struct ata_port *ap, struct ata_device *adev)
 }
 
 /**
- *	opt82c465mv_qc_issue_prot	-	command issue
+ *	opt82c465mv_qc_issue		-	command issue
  *	@qc: command pending
  *
  *	Called when the libata layer is about to issue a command. We wrap
@@ -593,7 +593,7 @@ static void opti82c46x_set_piomode(struct ata_port *ap, struct ata_device *adev)
  *	FIXME: dual channel needs ->serialize support
  */
 
-static unsigned int opti82c46x_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int opti82c46x_qc_issue(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
 	struct ata_device *adev = qc->dev;
@@ -604,13 +604,13 @@ static unsigned int opti82c46x_qc_issue_prot(struct ata_queued_cmd *qc)
 	    && ap->host->private_data != NULL)
 		opti82c46x_set_piomode(ap, adev);
 
-	return ata_qc_issue_prot(qc);
+	return ata_sff_qc_issue(qc);
 }
 
 static struct ata_port_operations opti82c46x_port_ops = {
 	.inherits	= &legacy_base_port_ops,
 	.set_piomode	= opti82c46x_set_piomode,
-	.qc_issue	= opti82c46x_qc_issue_prot,
+	.qc_issue	= opti82c46x_qc_issue,
 };
 
 static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev)
@@ -644,7 +644,7 @@ static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev)
  *	@irq: interrupt line
  *
  *	In dual channel mode the 6580 has one clock per channel and we have
- *	to software clockswitch in qc_issue_prot.
+ *	to software clockswitch in qc_issue.
  */
 
 static void qdi6580dp_set_piomode(struct ata_port *ap, struct ata_device *adev)
@@ -710,14 +710,14 @@ static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev)
 }
 
 /**
- *	qdi_qc_issue_prot	-	command issue
+ *	qdi_qc_issue		-	command issue
  *	@qc: command pending
  *
  *	Called when the libata layer is about to issue a command. We wrap
  *	this interface so that we can load the correct ATA timings.
  */
 
-static unsigned int qdi_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int qdi_qc_issue(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
 	struct ata_device *adev = qc->dev;
@@ -730,7 +730,7 @@ static unsigned int qdi_qc_issue_prot(struct ata_queued_cmd *qc)
 							2 * ap->port_no);
 		}
 	}
-	return ata_qc_issue_prot(qc);
+	return ata_sff_qc_issue(qc);
 }
 
 static unsigned int vlb32_data_xfer(struct ata_device *adev, unsigned char *buf,
@@ -759,7 +759,7 @@ static unsigned int vlb32_data_xfer(struct ata_device *adev, unsigned char *buf,
 		}
 		return (buflen + 3) & ~3;
 	} else
-		return ata_data_xfer(adev, buf, buflen, rw);
+		return ata_sff_data_xfer(adev, buf, buflen, rw);
 }
 
 static int qdi_port(struct platform_device *dev,
@@ -774,7 +774,7 @@ static int qdi_port(struct platform_device *dev,
 static struct ata_port_operations qdi6500_port_ops = {
 	.inherits	= &legacy_base_port_ops,
 	.set_piomode	= qdi6500_set_piomode,
-	.qc_issue	= qdi_qc_issue_prot,
+	.qc_issue	= qdi_qc_issue,
 	.data_xfer	= vlb32_data_xfer,
 };
 
@@ -1016,13 +1016,13 @@ static __init int legacy_init_one(struct legacy_probe *probe)
 	ap->ioaddr.cmd_addr = io_addr;
 	ap->ioaddr.altstatus_addr = ctrl_addr;
 	ap->ioaddr.ctl_addr = ctrl_addr;
-	ata_std_ports(&ap->ioaddr);
+	ata_sff_std_ports(&ap->ioaddr);
 	ap->host->private_data = ld;
 
 	ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io, io + 0x0206);
 
-	ret = ata_host_activate(host, probe->irq, ata_interrupt, 0,
-								&legacy_sht);
+	ret = ata_host_activate(host, probe->irq, ata_sff_interrupt, 0,
+				&legacy_sht);
 	if (ret)
 		goto fail;
 	ld->platform_dev = pdev;
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index d38e64cd6097..24a011b25024 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -55,7 +55,7 @@ static int marvell_pre_reset(struct ata_link *link, unsigned long deadline)
 	    (!(devices & 0x10)))	/* PATA enable ? */
 		return -ENOENT;
 
-	return ata_std_prereset(link, deadline);
+	return ata_sff_prereset(link, deadline);
 }
 
 static int marvell_cable_detect(struct ata_port *ap)
@@ -128,7 +128,7 @@ static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *i
 	if (pdev->device == 0x6101)
 		ppi[1] = &ata_dummy_port_info;
 
-	return ata_pci_init_one(pdev, ppi, &marvell_sht, NULL);
+	return ata_pci_sff_init_one(pdev, ppi, &marvell_sht, NULL);
 }
 
 static const struct pci_device_id marvell_pci_tbl[] = {
diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c
index fec93196710e..5d1d32a39c4d 100644
--- a/drivers/ata/pata_mpc52xx.c
+++ b/drivers/ata/pata_mpc52xx.c
@@ -252,7 +252,7 @@ mpc52xx_ata_dev_select(struct ata_port *ap, unsigned int device)
 	if (device != priv->csel)
 		mpc52xx_ata_apply_timings(priv, device);
 
-	ata_std_dev_select(ap,device);
+	ata_sff_dev_select(ap,device);
 }
 
 static struct scsi_host_template mpc52xx_ata_sht = {
@@ -305,7 +305,7 @@ mpc52xx_ata_init_one(struct device *dev, struct mpc52xx_ata_priv *priv,
 	ata_port_desc(ap, "ata_regs 0x%lx", raw_ata_regs);
 
 	/* activate host */
-	return ata_host_activate(host, priv->ata_irq, ata_interrupt, 0,
+	return ata_host_activate(host, priv->ata_irq, ata_sff_interrupt, 0,
 				 &mpc52xx_ata_sht);
 }
 
diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c
index 1b9d0d412ebf..7d7e3fdab71f 100644
--- a/drivers/ata/pata_mpiix.c
+++ b/drivers/ata/pata_mpiix.c
@@ -55,7 +55,7 @@ static int mpiix_pre_reset(struct ata_link *link, unsigned long deadline)
 	if (!pci_test_config_bits(pdev, &mpiix_enable_bits))
 		return -ENOENT;
 
-	return ata_std_prereset(link, deadline);
+	return ata_sff_prereset(link, deadline);
 }
 
 /**
@@ -69,8 +69,8 @@ static int mpiix_pre_reset(struct ata_link *link, unsigned long deadline)
  *
  *	This would get very ugly because we can only program timing for one
  *	device at a time, the other gets PIO0. Fortunately libata calls
- *	our qc_issue_prot command before a command is issued so we can
- *	flip the timings back and forth to reduce the pain.
+ *	our qc_issue command before a command is issued so we can flip the
+ *	timings back and forth to reduce the pain.
  */
 
 static void mpiix_set_piomode(struct ata_port *ap, struct ata_device *adev)
@@ -110,7 +110,7 @@ static void mpiix_set_piomode(struct ata_port *ap, struct ata_device *adev)
 }
 
 /**
- *	mpiix_qc_issue_prot	-	command issue
+ *	mpiix_qc_issue		-	command issue
  *	@qc: command pending
  *
  *	Called when the libata layer is about to issue a command. We wrap
@@ -120,7 +120,7 @@ static void mpiix_set_piomode(struct ata_port *ap, struct ata_device *adev)
  *	be made PIO0.
  */
 
-static unsigned int mpiix_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int mpiix_qc_issue(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
 	struct ata_device *adev = qc->dev;
@@ -133,7 +133,7 @@ static unsigned int mpiix_qc_issue_prot(struct ata_queued_cmd *qc)
 	if (adev->pio_mode && adev != ap->private_data)
 		mpiix_set_piomode(ap, adev);
 
-	return ata_qc_issue_prot(qc);
+	return ata_sff_qc_issue(qc);
 }
 
 static struct scsi_host_template mpiix_sht = {
@@ -142,7 +142,7 @@ static struct scsi_host_template mpiix_sht = {
 
 static struct ata_port_operations mpiix_port_ops = {
 	.inherits	= &ata_sff_port_ops,
-	.qc_issue	= mpiix_qc_issue_prot,
+	.qc_issue	= mpiix_qc_issue,
 	.cable_detect	= ata_cable_40wire,
 	.set_piomode	= mpiix_set_piomode,
 	.prereset	= mpiix_pre_reset,
@@ -207,10 +207,10 @@ static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	ap->ioaddr.altstatus_addr = ctl_addr;
 
 	/* Let libata fill in the port details */
-	ata_std_ports(&ap->ioaddr);
+	ata_sff_std_ports(&ap->ioaddr);
 
 	/* activate host */
-	return ata_host_activate(host, irq, ata_interrupt, IRQF_SHARED,
+	return ata_host_activate(host, irq, ata_sff_interrupt, IRQF_SHARED,
 				 &mpiix_sht);
 }
 
diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c
index 349182840d24..d9719c8b9dbe 100644
--- a/drivers/ata/pata_netcell.c
+++ b/drivers/ata/pata_netcell.c
@@ -68,10 +68,10 @@ static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 		return rc;
 
 	/* Any chip specific setup/optimisation/messages here */
-	ata_pci_clear_simplex(pdev);
+	ata_pci_bmdma_clear_simplex(pdev);
 
 	/* And let the library code do the work */
-	return ata_pci_init_one(pdev, port_info, &netcell_sht, NULL);
+	return ata_pci_sff_init_one(pdev, port_info, &netcell_sht, NULL);
 }
 
 static const struct pci_device_id netcell_pci_tbl[] = {
diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c
index 8213d081f313..c9c0ea67c71a 100644
--- a/drivers/ata/pata_ninja32.c
+++ b/drivers/ata/pata_ninja32.c
@@ -73,7 +73,7 @@ static void ninja32_dev_select(struct ata_port *ap, unsigned int device)
 	struct ata_device *adev = &ap->link.device[device];
 	if (ap->private_data != adev) {
 		iowrite8(0xd6, ap->ioaddr.bmdma_addr + 0x1f);
-		ata_std_dev_select(ap, device);
+		ata_sff_dev_select(ap, device);
 		ninja32_set_piomode(ap, adev);
 	}
 }
@@ -132,7 +132,7 @@ static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	ap->ioaddr.ctl_addr = base + 0x1E;
 	ap->ioaddr.altstatus_addr = base + 0x1E;
 	ap->ioaddr.bmdma_addr = base;
-	ata_std_ports(&ap->ioaddr);
+	ata_sff_std_ports(&ap->ioaddr);
 
 	iowrite8(0x05, base + 0x01);	/* Enable interrupt lines */
 	iowrite8(0xBE, base + 0x02);	/* Burst, ?? setup */
@@ -142,7 +142,7 @@ static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	iowrite8(0xa4, base + 0x1c);	/* Unknown */
 	iowrite8(0x83, base + 0x1d);	/* BMDMA control: WAIT0 */
 	/* FIXME: Should we disable them at remove ? */
-	return ata_host_activate(host, dev->irq, ata_interrupt,
+	return ata_host_activate(host, dev->irq, ata_sff_interrupt,
 				 IRQF_SHARED, &ninja32_sht);
 }
 
diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c
index 4d2eefee7387..76d2455bc453 100644
--- a/drivers/ata/pata_ns87410.c
+++ b/drivers/ata/pata_ns87410.c
@@ -50,7 +50,7 @@ static int ns87410_pre_reset(struct ata_link *link, unsigned long deadline)
 	if (!pci_test_config_bits(pdev, &ns87410_enable_bits[ap->port_no]))
 		return -ENOENT;
 
-	return ata_std_prereset(link, deadline);
+	return ata_sff_prereset(link, deadline);
 }
 
 /**
@@ -105,7 +105,7 @@ static void ns87410_set_piomode(struct ata_port *ap, struct ata_device *adev)
 }
 
 /**
- *	ns87410_qc_issue_prot	-	command issue
+ *	ns87410_qc_issue	-	command issue
  *	@qc: command pending
  *
  *	Called when the libata layer is about to issue a command. We wrap
@@ -113,7 +113,7 @@ static void ns87410_set_piomode(struct ata_port *ap, struct ata_device *adev)
  *	necessary.
  */
 
-static unsigned int ns87410_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int ns87410_qc_issue(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
 	struct ata_device *adev = qc->dev;
@@ -126,7 +126,7 @@ static unsigned int ns87410_qc_issue_prot(struct ata_queued_cmd *qc)
 	if (adev->pio_mode && adev != ap->private_data)
 		ns87410_set_piomode(ap, adev);
 
-	return ata_qc_issue_prot(qc);
+	return ata_sff_qc_issue(qc);
 }
 
 static struct scsi_host_template ns87410_sht = {
@@ -135,7 +135,7 @@ static struct scsi_host_template ns87410_sht = {
 
 static struct ata_port_operations ns87410_port_ops = {
 	.inherits	= &ata_sff_port_ops,
-	.qc_issue	= ns87410_qc_issue_prot,
+	.qc_issue	= ns87410_qc_issue,
 	.cable_detect	= ata_cable_40wire,
 	.set_piomode	= ns87410_set_piomode,
 	.prereset	= ns87410_pre_reset,
@@ -149,7 +149,7 @@ static int ns87410_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 		.port_ops = &ns87410_port_ops
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
-	return ata_pci_init_one(dev, ppi, &ns87410_sht, NULL);
+	return ata_pci_sff_init_one(dev, ppi, &ns87410_sht, NULL);
 }
 
 static const struct pci_device_id ns87410[] = {
diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c
index cdd79d6fc0ee..03a52cefc010 100644
--- a/drivers/ata/pata_ns87415.c
+++ b/drivers/ata/pata_ns87415.c
@@ -172,14 +172,14 @@ static void ns87415_bmdma_stop(struct ata_queued_cmd *qc)
 }
 
 /**
- *	ns87415_bmdma_irq_clear		-	Clear interrupt
+ *	ns87415_irq_clear		-	Clear interrupt
  *	@ap: Channel to clear
  *
  *	Erratum: Due to a chip bug regisers 02 and 0A bit 1 and 2 (the
  *	error bits) are reset by writing to register 00 or 08.
  */
 
-static void ns87415_bmdma_irq_clear(struct ata_port *ap)
+static void ns87415_irq_clear(struct ata_port *ap)
 {
 	void __iomem *mmio = ap->ioaddr.bmdma_addr;
 
@@ -306,7 +306,7 @@ static struct ata_port_operations ns87415_pata_ops = {
 	.bmdma_setup		= ns87415_bmdma_setup,
 	.bmdma_start		= ns87415_bmdma_start,
 	.bmdma_stop		= ns87415_bmdma_stop,
-	.irq_clear		= ns87415_bmdma_irq_clear,
+	.irq_clear		= ns87415_irq_clear,
 
 	.cable_detect		= ata_cable_40wire,
 	.set_piomode		= ns87415_set_piomode,
@@ -375,7 +375,7 @@ static int ns87415_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 	pci_write_config_byte(pdev, 0x55, 0xEE);
 	/* Select PIO0 8bit clocking */
 	pci_write_config_byte(pdev, 0x54, 0xB7);
-	return ata_pci_init_one(pdev, ppi, &ns87415_sht, NULL);
+	return ata_pci_sff_init_one(pdev, ppi, &ns87415_sht, NULL);
 }
 
 static const struct pci_device_id ns87415_pci_tbl[] = {
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index c1da79a76439..e678af383d13 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -47,7 +47,7 @@ static int oldpiix_pre_reset(struct ata_link *link, unsigned long deadline)
 	if (!pci_test_config_bits(pdev, &oldpiix_enable_bits[ap->port_no]))
 		return -ENOENT;
 
-	return ata_std_prereset(link, deadline);
+	return ata_sff_prereset(link, deadline);
 }
 
 /**
@@ -181,7 +181,7 @@ static void oldpiix_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 }
 
 /**
- *	oldpiix_qc_issue_prot	-	command issue
+ *	oldpiix_qc_issue	-	command issue
  *	@qc: command pending
  *
  *	Called when the libata layer is about to issue a command. We wrap
@@ -191,7 +191,7 @@ static void oldpiix_set_dmamode (struct ata_port *ap, struct ata_device *adev)
  *	be made PIO0.
  */
 
-static unsigned int oldpiix_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int oldpiix_qc_issue(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
 	struct ata_device *adev = qc->dev;
@@ -201,7 +201,7 @@ static unsigned int oldpiix_qc_issue_prot(struct ata_queued_cmd *qc)
 		if (adev->dma_mode)
 			oldpiix_set_dmamode(ap, adev);
 	}
-	return ata_qc_issue_prot(qc);
+	return ata_sff_qc_issue(qc);
 }
 
 
@@ -211,7 +211,7 @@ static struct scsi_host_template oldpiix_sht = {
 
 static struct ata_port_operations oldpiix_pata_ops = {
 	.inherits		= &ata_bmdma_port_ops,
-	.qc_issue		= oldpiix_qc_issue_prot,
+	.qc_issue		= oldpiix_qc_issue,
 	.cable_detect		= ata_cable_40wire,
 	.set_piomode		= oldpiix_set_piomode,
 	.set_dmamode		= oldpiix_set_dmamode,
@@ -249,7 +249,7 @@ static int oldpiix_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 		dev_printk(KERN_DEBUG, &pdev->dev,
 			   "version " DRV_VERSION "\n");
 
-	return ata_pci_init_one(pdev, ppi, &oldpiix_sht, NULL);
+	return ata_pci_sff_init_one(pdev, ppi, &oldpiix_sht, NULL);
 }
 
 static const struct pci_device_id oldpiix_pci_tbl[] = {
diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c
index 4ddd03a67775..fb2cf661b0e8 100644
--- a/drivers/ata/pata_opti.c
+++ b/drivers/ata/pata_opti.c
@@ -64,7 +64,7 @@ static int opti_pre_reset(struct ata_link *link, unsigned long deadline)
 	if (!pci_test_config_bits(pdev, &opti_enable_bits[ap->port_no]))
 		return -ENOENT;
 
-	return ata_std_prereset(link, deadline);
+	return ata_sff_prereset(link, deadline);
 }
 
 /**
@@ -173,7 +173,7 @@ static int opti_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");
 
-	return ata_pci_init_one(dev, ppi, &opti_sht, NULL);
+	return ata_pci_sff_init_one(dev, ppi, &opti_sht, NULL);
 }
 
 static const struct pci_device_id opti[] = {
diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index 36ac147de178..4cd744456313 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -64,7 +64,7 @@ static int optidma_pre_reset(struct ata_link *link, unsigned long deadline)
 	if (ap->port_no && !pci_test_config_bits(pdev, &optidma_enable_bits))
 		return -ENOENT;
 
-	return ata_std_prereset(link, deadline);
+	return ata_sff_prereset(link, deadline);
 }
 
 /**
@@ -430,7 +430,7 @@ static int optidma_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	if (optiplus_with_udma(dev))
 		ppi[0] = &info_82c700_udma;
 
-	return ata_pci_init_one(dev, ppi, &optidma_sht, NULL);
+	return ata_pci_sff_init_one(dev, ppi, &optidma_sht, NULL);
 }
 
 static const struct pci_device_id optidma[] = {
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 57efbf05c95f..2e206c5f869a 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -133,7 +133,7 @@ static struct scsi_host_template pcmcia_sht = {
 
 static struct ata_port_operations pcmcia_port_ops = {
 	.inherits	= &ata_sff_port_ops,
-	.data_xfer	= ata_data_xfer_noirq,
+	.data_xfer	= ata_sff_data_xfer_noirq,
 	.cable_detect	= ata_cable_40wire,
 	.set_mode	= pcmcia_set_mode,
 };
@@ -323,13 +323,13 @@ next_entry:
 		ap->ioaddr.cmd_addr = io_addr + 0x10 * p;
 		ap->ioaddr.altstatus_addr = ctl_addr + 0x10 * p;
 		ap->ioaddr.ctl_addr = ctl_addr + 0x10 * p;
-		ata_std_ports(&ap->ioaddr);
+		ata_sff_std_ports(&ap->ioaddr);
 
 		ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io_base, ctl_base);
 	}
 
 	/* activate */
-	ret = ata_host_activate(host, pdev->irq.AssignedIRQ, ata_interrupt,
+	ret = ata_host_activate(host, pdev->irq.AssignedIRQ, ata_sff_interrupt,
 				IRQF_SHARED, &pcmcia_sht);
 	if (ret)
 		goto failed;
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index d235c9f92d09..0e1c2c1134d3 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -248,7 +248,7 @@ static int pdc2027x_prereset(struct ata_link *link, unsigned long deadline)
 	/* Check whether port enabled */
 	if (!pdc2027x_port_enabled(link->ap))
 		return -ENOENT;
-	return ata_std_prereset(link, deadline);
+	return ata_sff_prereset(link, deadline);
 }
 
 /**
@@ -265,7 +265,7 @@ static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long
 	struct ata_device *pair = ata_dev_pair(adev);
 
 	if (adev->class != ATA_DEV_ATA || adev->devno == 0 || pair == NULL)
-		return ata_pci_default_filter(adev, mask);
+		return ata_bmdma_mode_filter(adev, mask);
 
 	/* Check for slave of a Maxtor at UDMA6 */
 	ata_id_c_string(pair->id, model_num, ATA_ID_PROD,
@@ -274,7 +274,7 @@ static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long
 	if (strstr(model_num, "Maxtor") == NULL && pair->dma_mode == XFER_UDMA_6)
 		mask &= ~ (1 << (6 + ATA_SHIFT_UDMA));
 
-	return ata_pci_default_filter(adev, mask);
+	return ata_bmdma_mode_filter(adev, mask);
 }
 
 /**
@@ -759,8 +759,8 @@ static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_de
 		return -EIO;
 
 	pci_set_master(pdev);
-	return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
-				 &pdc2027x_sht);
+	return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+				 IRQF_SHARED, &pdc2027x_sht);
 }
 
 /**
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index 8214100e3ac1..d2673060bc8d 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -324,7 +324,7 @@ static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id
 				return -ENODEV;
 		}
 	}
-	return ata_pci_init_one(dev, ppi, &pdc202xx_sht, NULL);
+	return ata_pci_sff_init_one(dev, ppi, &pdc202xx_sht, NULL);
 }
 
 static const struct pci_device_id pdc202xx[] = {
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index 0588c9b7e73e..1edfc13d05d2 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -52,7 +52,7 @@ static struct scsi_host_template pata_platform_sht = {
 
 static struct ata_port_operations pata_platform_port_ops = {
 	.inherits		= &ata_sff_port_ops,
-	.data_xfer		= ata_data_xfer_noirq,
+	.data_xfer		= ata_sff_data_xfer_noirq,
 	.cable_detect		= ata_cable_unknown,
 	.set_mode		= pata_platform_set_mode,
 	.port_start		= ATA_OP_NULL,
@@ -176,7 +176,7 @@ int __devinit __pata_platform_probe(struct device *dev,
 		      (unsigned long long)ctl_res->start);
 
 	/* activate */
-	return ata_host_activate(host, irq, irq ? ata_interrupt : NULL,
+	return ata_host_activate(host, irq, irq ? ata_sff_interrupt : NULL,
 				 irq_flags, &pata_platform_sht);
 }
 EXPORT_SYMBOL_GPL(__pata_platform_probe);
diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c
index d16b343d2a62..0d81dd5fdc38 100644
--- a/drivers/ata/pata_qdi.c
+++ b/drivers/ata/pata_qdi.c
@@ -102,14 +102,14 @@ static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev)
 }
 
 /**
- *	qdi_qc_issue_prot	-	command issue
+ *	qdi_qc_issue		-	command issue
  *	@qc: command pending
  *
  *	Called when the libata layer is about to issue a command. We wrap
  *	this interface so that we can load the correct ATA timings.
  */
 
-static unsigned int qdi_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int qdi_qc_issue(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
 	struct ata_device *adev = qc->dev;
@@ -121,7 +121,7 @@ static unsigned int qdi_qc_issue_prot(struct ata_queued_cmd *qc)
 			outb(qdi->clock[adev->devno], qdi->timing);
 		}
 	}
-	return ata_qc_issue_prot(qc);
+	return ata_sff_qc_issue(qc);
 }
 
 static unsigned int qdi_data_xfer(struct ata_device *dev, unsigned char *buf,
@@ -148,7 +148,7 @@ static unsigned int qdi_data_xfer(struct ata_device *dev, unsigned char *buf,
 			buflen += 4 - slop;
 		}
 	} else
-		buflen = ata_data_xfer(dev, buf, buflen, rw);
+		buflen = ata_sff_data_xfer(dev, buf, buflen, rw);
 
 	return buflen;
 }
@@ -159,7 +159,7 @@ static struct scsi_host_template qdi_sht = {
 
 static struct ata_port_operations qdi6500_port_ops = {
 	.inherits	= &ata_sff_port_ops,
-	.qc_issue	= qdi_qc_issue_prot,
+	.qc_issue	= qdi_qc_issue,
 	.data_xfer	= qdi_data_xfer,
 	.cable_detect	= ata_cable_40wire,
 	.set_piomode	= qdi6500_set_piomode,
@@ -223,7 +223,7 @@ static __init int qdi_init_one(unsigned long port, int type, unsigned long io, i
 	ap->ioaddr.cmd_addr = io_addr;
 	ap->ioaddr.altstatus_addr = ctl_addr;
 	ap->ioaddr.ctl_addr = ctl_addr;
-	ata_std_ports(&ap->ioaddr);
+	ata_sff_std_ports(&ap->ioaddr);
 
 	ata_port_desc(ap, "cmd %lx ctl %lx", io, ctl);
 
@@ -239,7 +239,7 @@ static __init int qdi_init_one(unsigned long port, int type, unsigned long io, i
 	printk(KERN_INFO DRV_NAME": qd%d at 0x%lx.\n", type, io);
 
 	/* activate */
-	ret = ata_host_activate(host, irq, ata_interrupt, 0, &qdi_sht);
+	ret = ata_host_activate(host, irq, ata_sff_interrupt, 0, &qdi_sht);
 	if (ret)
 		goto fail;
 
diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index 9ab84fc3798d..1c0d9fa7ee54 100644
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -156,7 +156,7 @@ static void radisys_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 }
 
 /**
- *	radisys_qc_issue_prot	-	command issue
+ *	radisys_qc_issue	-	command issue
  *	@qc: command pending
  *
  *	Called when the libata layer is about to issue a command. We wrap
@@ -166,7 +166,7 @@ static void radisys_set_dmamode (struct ata_port *ap, struct ata_device *adev)
  *	be made PIO0.
  */
 
-static unsigned int radisys_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int radisys_qc_issue(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
 	struct ata_device *adev = qc->dev;
@@ -180,7 +180,7 @@ static unsigned int radisys_qc_issue_prot(struct ata_queued_cmd *qc)
 				radisys_set_piomode(ap, adev);
 		}
 	}
-	return ata_qc_issue_prot(qc);
+	return ata_sff_qc_issue(qc);
 }
 
 
@@ -190,7 +190,7 @@ static struct scsi_host_template radisys_sht = {
 
 static struct ata_port_operations radisys_pata_ops = {
 	.inherits		= &ata_bmdma_port_ops,
-	.qc_issue		= radisys_qc_issue_prot,
+	.qc_issue		= radisys_qc_issue,
 	.cable_detect		= ata_cable_unknown,
 	.set_piomode		= radisys_set_piomode,
 	.set_dmamode		= radisys_set_dmamode,
@@ -228,7 +228,7 @@ static int radisys_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 		dev_printk(KERN_DEBUG, &pdev->dev,
 			   "version " DRV_VERSION "\n");
 
-	return ata_pci_init_one(pdev, ppi, &radisys_sht, NULL);
+	return ata_pci_sff_init_one(pdev, ppi, &radisys_sht, NULL);
 }
 
 static const struct pci_device_id radisys_pci_tbl[] = {
diff --git a/drivers/ata/pata_rb500_cf.c b/drivers/ata/pata_rb500_cf.c
index 7affceec1c29..5b23d79bc92b 100644
--- a/drivers/ata/pata_rb500_cf.c
+++ b/drivers/ata/pata_rb500_cf.c
@@ -57,7 +57,7 @@ static inline void rb500_pata_finish_io(struct ata_port *ap)
 	struct ata_host *ah = ap->host;
 	struct rb500_cf_info *info = ah->private_data;
 
-	ata_altstatus(ap);
+	ata_sff_altstatus(ap);
 	ndelay(RB500_CF_IO_DELAY);
 
 	set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
@@ -109,7 +109,7 @@ static irqreturn_t rb500_pata_irq_handler(int irq, void *dev_instance)
 	if (gpio_get_value(info->gpio_line)) {
 		set_irq_type(info->irq, IRQ_TYPE_LEVEL_LOW);
 		if (!info->frozen)
-			ata_interrupt(info->irq, dev_instance);
+			ata_sff_interrupt(info->irq, dev_instance);
 	} else {
 		set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
 	}
@@ -148,7 +148,7 @@ static void rb500_pata_setup_ports(struct ata_host *ah)
 	ap->ioaddr.ctl_addr	= info->iobase + RB500_CF_REG_CTRL;
 	ap->ioaddr.altstatus_addr = info->iobase + RB500_CF_REG_CTRL;
 
-	ata_std_ports(&ap->ioaddr);
+	ata_sff_std_ports(&ap->ioaddr);
 
 	ap->ioaddr.data_addr	= info->iobase + RB500_CF_REG_DATA;
 }
diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index 462b72a31280..7dfd1f3f6f3a 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -99,7 +99,7 @@ static int rz1000_init_one (struct pci_dev *pdev, const struct pci_device_id *en
 		printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
 
 	if (rz1000_fifo_disable(pdev) == 0)
-		return ata_pci_init_one(pdev, ppi, &rz1000_sht, NULL);
+		return ata_pci_sff_init_one(pdev, ppi, &rz1000_sht, NULL);
 
 	printk(KERN_ERR DRV_NAME ": failed to disable read-ahead on chipset..\n");
 	/* Not safe to use so skip */
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index 42efacf73c79..cbab397e3db7 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -151,7 +151,7 @@ static void sc1200_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 }
 
 /**
- *	sc1200_qc_issue_prot	-	command issue
+ *	sc1200_qc_issue		-	command issue
  *	@qc: command pending
  *
  *	Called when the libata layer is about to issue a command. We wrap
@@ -160,7 +160,7 @@ static void sc1200_set_dmamode(struct ata_port *ap, struct ata_device *adev)
  *	one MWDMA/UDMA bit.
  */
 
-static unsigned int sc1200_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int sc1200_qc_issue(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
 	struct ata_device *adev = qc->dev;
@@ -175,7 +175,7 @@ static unsigned int sc1200_qc_issue_prot(struct ata_queued_cmd *qc)
 		    	sc1200_set_dmamode(ap, adev);
 	}
 
-	return ata_qc_issue_prot(qc);
+	return ata_sff_qc_issue(qc);
 }
 
 static struct scsi_host_template sc1200_sht = {
@@ -185,8 +185,8 @@ static struct scsi_host_template sc1200_sht = {
 
 static struct ata_port_operations sc1200_port_ops = {
 	.inherits	= &ata_bmdma_port_ops,
-	.qc_prep 	= ata_dumb_qc_prep,
-	.qc_issue	= sc1200_qc_issue_prot,
+	.qc_prep 	= ata_sff_dumb_qc_prep,
+	.qc_issue	= sc1200_qc_issue,
 	.cable_detect	= ata_cable_40wire,
 	.set_piomode	= sc1200_set_piomode,
 	.set_dmamode	= sc1200_set_dmamode,
@@ -213,7 +213,7 @@ static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	/* Can't enable port 2 yet, see top comments */
 	const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
 
-	return ata_pci_init_one(dev, ppi, &sc1200_sht, NULL);
+	return ata_pci_sff_init_one(dev, ppi, &sc1200_sht, NULL);
 }
 
 static const struct pci_device_id sc1200[] = {
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index fba5bed0a641..701d0addae73 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -266,7 +266,7 @@ unsigned long scc_mode_filter(struct ata_device *adev, unsigned long mask)
 		printk(KERN_INFO "%s: limit ATAPI UDMA to UDMA4\n", DRV_NAME);
 		mask &= ~(0xE0 << ATA_SHIFT_UDMA);
 	}
-	return ata_pci_default_filter(adev, mask);
+	return ata_bmdma_mode_filter(adev, mask);
 }
 
 /**
@@ -274,7 +274,7 @@ unsigned long scc_mode_filter(struct ata_device *adev, unsigned long mask)
  *	@ap: Port to which output is sent
  *	@tf: ATA taskfile register set
  *
- *	Note: Original code is ata_tf_load().
+ *	Note: Original code is ata_sff_tf_load().
  */
 
 static void scc_tf_load (struct ata_port *ap, const struct ata_taskfile *tf)
@@ -341,7 +341,7 @@ static u8 scc_check_status (struct ata_port *ap)
  *	@ap: Port from which input is read
  *	@tf: ATA taskfile register set for storing input
  *
- *	Note: Original code is ata_tf_read().
+ *	Note: Original code is ata_sff_tf_read().
  */
 
 static void scc_tf_read (struct ata_port *ap, struct ata_taskfile *tf)
@@ -373,7 +373,7 @@ static void scc_tf_read (struct ata_port *ap, struct ata_taskfile *tf)
  *	@ap: port to which command is being issued
  *	@tf: ATA taskfile register set
  *
- *	Note: Original code is ata_exec_command().
+ *	Note: Original code is ata_sff_exec_command().
  */
 
 static void scc_exec_command (struct ata_port *ap,
@@ -382,7 +382,7 @@ static void scc_exec_command (struct ata_port *ap,
 	DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command);
 
 	out_be32(ap->ioaddr.command_addr, tf->command);
-	ata_pause(ap);
+	ata_sff_pause(ap);
 }
 
 /**
@@ -396,14 +396,14 @@ static u8 scc_check_altstatus (struct ata_port *ap)
 }
 
 /**
- *	scc_std_dev_select - Select device 0/1 on ATA bus
+ *	scc_dev_select - Select device 0/1 on ATA bus
  *	@ap: ATA channel to manipulate
  *	@device: ATA device (numbered from zero) to select
  *
- *	Note: Original code is ata_std_dev_select().
+ *	Note: Original code is ata_sff_dev_select().
  */
 
-static void scc_std_dev_select (struct ata_port *ap, unsigned int device)
+static void scc_dev_select (struct ata_port *ap, unsigned int device)
 {
 	u8 tmp;
 
@@ -413,7 +413,7 @@ static void scc_std_dev_select (struct ata_port *ap, unsigned int device)
 		tmp = ATA_DEVICE_OBS | ATA_DEV1;
 
 	out_be32(ap->ioaddr.device_addr, tmp);
-	ata_pause(ap);
+	ata_sff_pause(ap);
 }
 
 /**
@@ -514,7 +514,7 @@ static int scc_bus_post_reset(struct ata_port *ap, unsigned int devmask,
 	 * BSY bit to clear
 	 */
 	if (dev0) {
-		rc = ata_wait_ready(ap, deadline);
+		rc = ata_sff_wait_ready(ap, deadline);
 		if (rc && rc != -ENODEV)
 			return rc;
 	}
@@ -535,7 +535,7 @@ static int scc_bus_post_reset(struct ata_port *ap, unsigned int devmask,
 		msleep(50);	/* give drive a breather */
 	}
 	if (dev1) {
-		rc = ata_wait_ready(ap, deadline);
+		rc = ata_sff_wait_ready(ap, deadline);
 		if (rc && rc != -ENODEV)
 			return rc;
 	}
@@ -571,7 +571,7 @@ static unsigned int scc_bus_softreset(struct ata_port *ap, unsigned int devmask,
 	out_be32(ioaddr->ctl_addr, ap->ctl);
 
 	/* wait a while before checking status */
-	ata_wait_after_reset(ap, deadline);
+	ata_sff_wait_after_reset(ap, deadline);
 
 	/* Before we perform post reset processing we want to see if
 	 * the bus shows 0xFF because the odd clown forgets the D7
@@ -586,16 +586,16 @@ static unsigned int scc_bus_softreset(struct ata_port *ap, unsigned int devmask,
 }
 
 /**
- *	scc_std_softreset - reset host port via ATA SRST
+ *	scc_softreset - reset host port via ATA SRST
  *	@ap: port to reset
  *	@classes: resulting classes of attached devices
  *	@deadline: deadline jiffies for the operation
  *
- *	Note: Original code is ata_std_softreset().
+ *	Note: Original code is ata_sff_softreset().
  */
 
-static int scc_std_softreset(struct ata_link *link, unsigned int *classes,
-                             unsigned long deadline)
+static int scc_softreset(struct ata_link *link, unsigned int *classes,
+			 unsigned long deadline)
 {
 	struct ata_port *ap = link->ap;
 	unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
@@ -628,10 +628,10 @@ static int scc_std_softreset(struct ata_link *link, unsigned int *classes,
 	}
 
 	/* determine by signature whether we have ATA or ATAPI devices */
-	classes[0] = ata_dev_try_classify(&ap->link.device[0],
+	classes[0] = ata_sff_dev_classify(&ap->link.device[0],
 					  devmask & (1 << 0), &err);
 	if (slave_possible && err != 0x81)
-		classes[1] = ata_dev_try_classify(&ap->link.device[1],
+		classes[1] = ata_sff_dev_classify(&ap->link.device[1],
 						  devmask & (1 << 1), &err);
 
  out:
@@ -695,7 +695,7 @@ static void scc_bmdma_stop (struct ata_queued_cmd *qc)
 			printk(KERN_WARNING "%s: Internal Bus Error\n", DRV_NAME);
 			out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMSINT);
 			/* TBD: SW reset */
-			scc_std_softreset(&ap->link, &classes, deadline);
+			scc_softreset(&ap->link, &classes, deadline);
 			continue;
 		}
 
@@ -721,7 +721,7 @@ static void scc_bmdma_stop (struct ata_queued_cmd *qc)
 		 in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
 
 	/* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
-	ata_altstatus(ap);	/* dummy read */
+	ata_sff_altstatus(ap);	/* dummy read */
 }
 
 /**
@@ -742,7 +742,7 @@ static u8 scc_bmdma_status (struct ata_port *ap)
 		return host_stat;
 
 	/* errata A252,A308 workaround: Step4 */
-	if ((ata_altstatus(ap) & ATA_ERR) && (int_status & INTSTS_INTRQ))
+	if ((ata_sff_altstatus(ap) & ATA_ERR) && (int_status & INTSTS_INTRQ))
 		return (host_stat | ATA_DMA_INTR);
 
 	/* errata A308 workaround Step5 */
@@ -773,7 +773,7 @@ static u8 scc_bmdma_status (struct ata_port *ap)
  *	@buflen: buffer length
  *	@rw: read/write
  *
- *	Note: Original code is ata_data_xfer().
+ *	Note: Original code is ata_sff_data_xfer().
  */
 
 static unsigned int scc_data_xfer (struct ata_device *dev, unsigned char *buf,
@@ -815,7 +815,7 @@ static unsigned int scc_data_xfer (struct ata_device *dev, unsigned char *buf,
  *	scc_irq_on - Enable interrupts on a port.
  *	@ap: Port on which interrupts are enabled.
  *
- *	Note: Original code is ata_irq_on().
+ *	Note: Original code is ata_sff_irq_on().
  */
 
 static u8 scc_irq_on (struct ata_port *ap)
@@ -835,13 +835,13 @@ static u8 scc_irq_on (struct ata_port *ap)
 }
 
 /**
- *	scc_bmdma_freeze - Freeze BMDMA controller port
+ *	scc_freeze - Freeze BMDMA controller port
  *	@ap: port to freeze
  *
- *	Note: Original code is ata_bmdma_freeze().
+ *	Note: Original code is ata_sff_freeze().
  */
 
-static void scc_bmdma_freeze (struct ata_port *ap)
+static void scc_freeze (struct ata_port *ap)
 {
 	struct ata_ioports *ioaddr = &ap->ioaddr;
 
@@ -868,18 +868,18 @@ static void scc_bmdma_freeze (struct ata_port *ap)
 static int scc_pata_prereset(struct ata_link *link, unsigned long deadline)
 {
 	link->ap->cbl = ATA_CBL_PATA80;
-	return ata_std_prereset(link, deadline);
+	return ata_sff_prereset(link, deadline);
 }
 
 /**
- *	scc_std_postreset - standard postreset callback
+ *	scc_postreset - standard postreset callback
  *	@ap: the target ata_port
  *	@classes: classes of attached devices
  *
- *	Note: Original code is ata_std_postreset().
+ *	Note: Original code is ata_sff_postreset().
  */
 
-static void scc_std_postreset(struct ata_link *link, unsigned int *classes)
+static void scc_postreset(struct ata_link *link, unsigned int *classes)
 {
 	struct ata_port *ap = link->ap;
 
@@ -905,13 +905,13 @@ static void scc_std_postreset(struct ata_link *link, unsigned int *classes)
 }
 
 /**
- *	scc_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt.
+ *	scc_irq_clear - Clear PCI IDE BMDMA interrupt.
  *	@ap: Port associated with this ATA transaction.
  *
- *	Note: Original code is ata_bmdma_irq_clear().
+ *	Note: Original code is ata_sff_irq_clear().
  */
 
-static void scc_bmdma_irq_clear (struct ata_port *ap)
+static void scc_irq_clear (struct ata_port *ap)
 {
 	void __iomem *mmio = ap->ioaddr.bmdma_addr;
 
@@ -972,7 +972,7 @@ static struct ata_port_operations scc_pata_ops = {
 	.exec_command		= scc_exec_command,
 	.check_status		= scc_check_status,
 	.check_altstatus	= scc_check_altstatus,
-	.dev_select		= scc_std_dev_select,
+	.dev_select		= scc_dev_select,
 
 	.bmdma_setup		= scc_bmdma_setup,
 	.bmdma_start		= scc_bmdma_start,
@@ -980,13 +980,13 @@ static struct ata_port_operations scc_pata_ops = {
 	.bmdma_status		= scc_bmdma_status,
 	.data_xfer		= scc_data_xfer,
 
-	.freeze			= scc_bmdma_freeze,
+	.freeze			= scc_freeze,
 	.prereset		= scc_pata_prereset,
-	.softreset		= scc_std_softreset,
-	.postreset		= scc_std_postreset,
+	.softreset		= scc_softreset,
+	.postreset		= scc_postreset,
 	.post_internal_cmd	= scc_bmdma_stop,
 
-	.irq_clear		= scc_bmdma_irq_clear,
+	.irq_clear		= scc_irq_clear,
 	.irq_on			= scc_irq_on,
 
 	.port_start		= scc_port_start,
@@ -1140,8 +1140,8 @@ static int scc_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (rc)
 		return rc;
 
-	return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
-				 &scc_sht);
+	return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+				 IRQF_SHARED, &scc_sht);
 }
 
 static struct pci_driver scc_pci_driver = {
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index 2f4f9b0f89de..ffd26d0dc50d 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -199,7 +199,7 @@ static unsigned long serverworks_osb4_filter(struct ata_device *adev, unsigned l
 {
 	if (adev->class == ATA_DEV_ATA)
 		mask &= ~ATA_MASK_UDMA;
-	return ata_pci_default_filter(adev, mask);
+	return ata_bmdma_mode_filter(adev, mask);
 }
 
 
@@ -219,7 +219,7 @@ static unsigned long serverworks_csb_filter(struct ata_device *adev, unsigned lo
 
 	/* Disk, UDMA */
 	if (adev->class != ATA_DEV_ATA)
-		return ata_pci_default_filter(adev, mask);
+		return ata_bmdma_mode_filter(adev, mask);
 
 	/* Actually do need to check */
 	ata_id_c_string(adev->id, model_num, ATA_ID_PROD, sizeof(model_num));
@@ -228,7 +228,7 @@ static unsigned long serverworks_csb_filter(struct ata_device *adev, unsigned lo
 		if (!strcmp(p, model_num))
 			mask &= ~(0xE0 << ATA_SHIFT_UDMA);
 	}
-	return ata_pci_default_filter(adev, mask);
+	return ata_bmdma_mode_filter(adev, mask);
 }
 
 /**
@@ -459,9 +459,9 @@ static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id
 		serverworks_fixup_ht1000(pdev);
 
 	if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE)
-		ata_pci_clear_simplex(pdev);
+		ata_pci_bmdma_clear_simplex(pdev);
 
-	return ata_pci_init_one(pdev, ppi, &serverworks_sht, NULL);
+	return ata_pci_sff_init_one(pdev, ppi, &serverworks_sht, NULL);
 }
 
 #ifdef CONFIG_PM
@@ -482,7 +482,7 @@ static int serverworks_reinit_one(struct pci_dev *pdev)
 			serverworks_fixup_osb4(pdev);
 			break;
 		case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
-			ata_pci_clear_simplex(pdev);
+			ata_pci_bmdma_clear_simplex(pdev);
 			/* fall through */
 		case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE:
 		case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2:
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 63fafc6d6da3..720b8645f58a 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -350,19 +350,19 @@ static int __devinit sil680_init_one(struct pci_dev *pdev,
 	host->ports[0]->ioaddr.cmd_addr = mmio_base + 0x80;
 	host->ports[0]->ioaddr.ctl_addr = mmio_base + 0x8a;
 	host->ports[0]->ioaddr.altstatus_addr = mmio_base + 0x8a;
-	ata_std_ports(&host->ports[0]->ioaddr);
+	ata_sff_std_ports(&host->ports[0]->ioaddr);
 	host->ports[1]->ioaddr.bmdma_addr = mmio_base + 0x08;
 	host->ports[1]->ioaddr.cmd_addr = mmio_base + 0xc0;
 	host->ports[1]->ioaddr.ctl_addr = mmio_base + 0xca;
 	host->ports[1]->ioaddr.altstatus_addr = mmio_base + 0xca;
-	ata_std_ports(&host->ports[1]->ioaddr);
+	ata_sff_std_ports(&host->ports[1]->ioaddr);
 
 	/* Register & activate */
-	return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
-				 &sil680_sht);
+	return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+				 IRQF_SHARED, &sil680_sht);
 
 use_ioports:
-	return ata_pci_init_one(pdev, ppi, &sil680_sht, NULL);
+	return ata_pci_sff_init_one(pdev, ppi, &sil680_sht, NULL);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index 793e6714df8c..e82c66e8d31b 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -156,7 +156,7 @@ static int sis_pre_reset(struct ata_link *link, unsigned long deadline)
 	/* Clear the FIFO settings. We can't enable the FIFO until
 	   we know we are poking at a disk */
 	pci_write_config_byte(pdev, 0x4B, 0);
-	return ata_std_prereset(link, deadline);
+	return ata_sff_prereset(link, deadline);
 }
 
 
@@ -821,7 +821,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	sis_fixup(pdev, chipset);
 
-	return ata_pci_init_one(pdev, ppi, &sis_sht, chipset);
+	return ata_pci_sff_init_one(pdev, ppi, &sis_sht, chipset);
 }
 
 static const struct pci_device_id sis_pci_tbl[] = {
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index bee11ca8f55a..70d94fb28a5f 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -60,7 +60,7 @@ static int sl82c105_pre_reset(struct ata_link *link, unsigned long deadline)
 
 	if (ap->port_no && !pci_test_config_bits(pdev, &sl82c105_enable_bits[ap->port_no]))
 		return -ENOENT;
-	return ata_std_prereset(link, deadline);
+	return ata_sff_prereset(link, deadline);
 }
 
 
@@ -317,7 +317,7 @@ static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id
 	val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16;
 	pci_write_config_dword(dev, 0x40, val);
 
-	return ata_pci_init_one(dev, ppi, &sl82c105_sht, NULL);
+	return ata_pci_sff_init_one(dev, ppi, &sl82c105_sht, NULL);
 }
 
 static const struct pci_device_id sl82c105[] = {
diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c
index bd546a389ce1..b181261f2743 100644
--- a/drivers/ata/pata_triflex.c
+++ b/drivers/ata/pata_triflex.c
@@ -66,7 +66,7 @@ static int triflex_prereset(struct ata_link *link, unsigned long deadline)
 	if (!pci_test_config_bits(pdev, &triflex_enable_bits[ap->port_no]))
 		return -ENOENT;
 
-	return ata_std_prereset(link, deadline);
+	return ata_sff_prereset(link, deadline);
 }
 
 
@@ -201,7 +201,7 @@ static int triflex_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");
 
-	return ata_pci_init_one(dev, ppi, &triflex_sht, NULL);
+	return ata_pci_sff_init_one(dev, ppi, &triflex_sht, NULL);
 }
 
 static const struct pci_device_id triflex[] = {
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 2928fa173132..4b85f84fbe76 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -210,7 +210,7 @@ static int via_pre_reset(struct ata_link *link, unsigned long deadline)
 			return -ENOENT;
 	}
 
-	return ata_std_prereset(link, deadline);
+	return ata_sff_prereset(link, deadline);
 }
 
 
@@ -336,7 +336,7 @@ static struct ata_port_operations via_port_ops = {
 
 static struct ata_port_operations via_port_ops_noirq = {
 	.inherits	= &via_port_ops,
-	.data_xfer	= ata_data_xfer_noirq,
+	.data_xfer	= ata_sff_data_xfer_noirq,
 };
 
 /**
@@ -511,7 +511,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	}
 
 	/* We have established the device type, now fire it up */
-	return ata_pci_init_one(pdev, ppi, &via_sht, (void *)config);
+	return ata_pci_sff_init_one(pdev, ppi, &via_sht, (void *)config);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c
index f235bb0d6139..cc18231e9334 100644
--- a/drivers/ata/pata_winbond.c
+++ b/drivers/ata/pata_winbond.c
@@ -116,7 +116,7 @@ static unsigned int winbond_data_xfer(struct ata_device *dev,
 			buflen += 4 - slop;
 		}
 	} else
-		buflen = ata_data_xfer(dev, buf, buflen, rw);
+		buflen = ata_sff_data_xfer(dev, buf, buflen, rw);
 
 	return buflen;
 }
@@ -198,7 +198,7 @@ static __init int winbond_init_one(unsigned long port)
 		ap->ioaddr.cmd_addr = cmd_addr;
 		ap->ioaddr.altstatus_addr = ctl_addr;
 		ap->ioaddr.ctl_addr = ctl_addr;
-		ata_std_ports(&ap->ioaddr);
+		ata_sff_std_ports(&ap->ioaddr);
 
 		/* hook in a private data structure per channel */
 		host->private_data = &winbond_data[nr_winbond_host];
@@ -206,7 +206,7 @@ static __init int winbond_init_one(unsigned long port)
 		winbond_data[nr_winbond_host].platform_dev = pdev;
 
 		/* activate */
-		rc = ata_host_activate(host, 14 + i, ata_interrupt, 0,
+		rc = ata_host_activate(host, 14 + i, ata_sff_interrupt, 0,
 				       &winbond_sht);
 		if (rc)
 			goto err_unregister;
diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c
index c431bf36f9ba..be53545c9f64 100644
--- a/drivers/ata/pdc_adma.c
+++ b/drivers/ata/pdc_adma.c
@@ -208,7 +208,7 @@ static void adma_reinit_engine(struct ata_port *ap)
 
 	/* mask/clear ATA interrupts */
 	writeb(ATA_NIEN, ap->ioaddr.ctl_addr);
-	ata_check_status(ap);
+	ata_sff_check_status(ap);
 
 	/* reset the ADMA engine */
 	adma_reset_engine(ap);
@@ -243,7 +243,7 @@ static void adma_freeze(struct ata_port *ap)
 
 	/* mask/clear ATA interrupts */
 	writeb(ATA_NIEN, ap->ioaddr.ctl_addr);
-	ata_check_status(ap);
+	ata_sff_check_status(ap);
 
 	/* reset ADMA to idle state */
 	writew(aPIOMD4 | aNIEN | aRSTADM, chan + ADMA_CONTROL);
@@ -266,7 +266,7 @@ static int adma_prereset(struct ata_link *link, unsigned long deadline)
 		pp->state = adma_state_mmio;
 	adma_reinit_engine(ap);
 
-	return ata_std_prereset(link, deadline);
+	return ata_sff_prereset(link, deadline);
 }
 
 static int adma_fill_sg(struct ata_queued_cmd *qc)
@@ -322,7 +322,7 @@ static void adma_qc_prep(struct ata_queued_cmd *qc)
 
 	adma_enter_reg_mode(qc->ap);
 	if (qc->tf.protocol != ATA_PROT_DMA) {
-		ata_qc_prep(qc);
+		ata_sff_qc_prep(qc);
 		return;
 	}
 
@@ -421,7 +421,7 @@ static unsigned int adma_qc_issue(struct ata_queued_cmd *qc)
 	}
 
 	pp->state = adma_state_mmio;
-	return ata_qc_issue_prot(qc);
+	return ata_sff_qc_issue(qc);
 }
 
 static inline unsigned int adma_intr_pkt(struct ata_host *host)
@@ -492,7 +492,7 @@ static inline unsigned int adma_intr_mmio(struct ata_host *host)
 			if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) {
 
 				/* check main status, clearing INTRQ */
-				u8 status = ata_check_status(ap);
+				u8 status = ata_sff_check_status(ap);
 				if ((status & ATA_BUSY))
 					continue;
 				DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n",
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index 12fbf3868fe2..6e6fca4c20b6 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -271,7 +271,7 @@ static void inic_host_intr(struct ata_port *ap)
 			return;
 		}
 
-		if (likely(ata_host_intr(ap, qc)))
+		if (likely(ata_sff_host_intr(ap, qc)))
 			return;
 
 		ap->ops->check_status(ap); /* clear ATA interrupt */
@@ -356,7 +356,7 @@ static unsigned int inic_qc_issue(struct ata_queued_cmd *qc)
 			return AC_ERR_HSM;
 	}
 
-	return ata_qc_issue_prot(qc);
+	return ata_sff_qc_issue(qc);
 }
 
 static void inic_freeze(struct ata_port *ap)
@@ -418,9 +418,9 @@ static int inic_hardreset(struct ata_link *link, unsigned int *class,
 		struct ata_taskfile tf;
 
 		/* wait a while before checking status */
-		ata_wait_after_reset(ap, deadline);
+		ata_sff_wait_after_reset(ap, deadline);
 
-		rc = ata_wait_ready(ap, deadline);
+		rc = ata_sff_wait_ready(ap, deadline);
 		/* link occupied, -ENODEV too is an error */
 		if (rc) {
 			ata_link_printk(link, KERN_WARNING, "device not ready "
@@ -428,7 +428,7 @@ static int inic_hardreset(struct ata_link *link, unsigned int *class,
 			return rc;
 		}
 
-		ata_tf_read(ap, &tf);
+		ata_sff_tf_read(ap, &tf);
 		*class = ata_dev_classify(&tf);
 		if (*class == ATA_DEV_UNKNOWN)
 			*class = ATA_DEV_NONE;
@@ -663,7 +663,7 @@ static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 			((unsigned long)iomap[2 * i + 1] | ATA_PCI_CTL_OFS);
 		port->scr_addr = iomap[MMIO_BAR] + offset + PORT_SCR;
 
-		ata_std_ports(port);
+		ata_sff_std_ports(port);
 
 		ata_port_pbar_desc(ap, MMIO_BAR, -1, "mmio");
 		ata_port_pbar_desc(ap, MMIO_BAR, offset, "port");
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 16c15ed3536e..fa75df634c75 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -1386,7 +1386,7 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)
 		 * shadow block, etc registers.
 		 */
 		mv_stop_edma(ap);
-		return ata_qc_issue_prot(qc);
+		return ata_sff_qc_issue(qc);
 	}
 
 	mv_start_dma(ap, port_mmio, pp, qc->tf.protocol);
@@ -2362,7 +2362,7 @@ comreset_retry:
 	 */
 	retry = 20;
 	while (1) {
-		u8 drv_stat = ata_check_status(ap);
+		u8 drv_stat = ata_sff_check_status(ap);
 		if ((drv_stat != 0x80) && (drv_stat != 0x7f))
 			break;
 		msleep(500);
@@ -2377,7 +2377,7 @@ comreset_retry:
 	 */
 
 	/* finally, read device signature from TF registers */
-	*class = ata_dev_try_classify(ap->link.device, 1, NULL);
+	*class = ata_sff_dev_classify(ap->link.device, 1, NULL);
 
 	writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
 
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 95fd0cd28b49..63cc43765f04 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -730,7 +730,7 @@ static void nv_adma_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
 	   ADMA mode could abort outstanding commands. */
 	nv_adma_register_mode(ap);
 
-	ata_tf_read(ap, tf);
+	ata_sff_tf_read(ap, tf);
 }
 
 static unsigned int nv_adma_tf_to_cpb(struct ata_taskfile *tf, __le16 *cpb)
@@ -844,12 +844,12 @@ static int nv_host_intr(struct ata_port *ap, u8 irq_stat)
 
 	/* DEV interrupt w/ no active qc? */
 	if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) {
-		ata_check_status(ap);
+		ata_sff_check_status(ap);
 		return 1;
 	}
 
 	/* handle interrupt */
-	return ata_host_intr(ap, qc);
+	return ata_sff_host_intr(ap, qc);
 }
 
 static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
@@ -1028,7 +1028,7 @@ static void nv_adma_irq_clear(struct ata_port *ap)
 	u32 notifier_clears[2];
 
 	if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) {
-		ata_bmdma_irq_clear(ap);
+		ata_sff_irq_clear(ap);
 		return;
 	}
 
@@ -1059,7 +1059,7 @@ static void nv_adma_post_internal_cmd(struct ata_queued_cmd *qc)
 	struct nv_adma_port_priv *pp = qc->ap->private_data;
 
 	if (pp->flags & NV_ADMA_PORT_REGISTER_MODE)
-		ata_bmdma_post_internal_cmd(qc);
+		ata_sff_post_internal_cmd(qc);
 }
 
 static int nv_adma_port_start(struct ata_port *ap)
@@ -1336,7 +1336,7 @@ static void nv_adma_qc_prep(struct ata_queued_cmd *qc)
 		BUG_ON(!(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) &&
 			(qc->flags & ATA_QCFLAG_DMAMAP));
 		nv_adma_register_mode(qc->ap);
-		ata_qc_prep(qc);
+		ata_sff_qc_prep(qc);
 		return;
 	}
 
@@ -1395,7 +1395,7 @@ static unsigned int nv_adma_qc_issue(struct ata_queued_cmd *qc)
 		BUG_ON(!(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) &&
 			(qc->flags & ATA_QCFLAG_DMAMAP));
 		nv_adma_register_mode(qc->ap);
-		return ata_qc_issue_prot(qc);
+		return ata_sff_qc_issue(qc);
 	} else
 		nv_adma_mode(qc->ap);
 
@@ -1436,7 +1436,7 @@ static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance)
 
 			qc = ata_qc_from_tag(ap, ap->link.active_tag);
 			if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)))
-				handled += ata_host_intr(ap, qc);
+				handled += ata_sff_host_intr(ap, qc);
 			else
 				// No request pending?  Clear interrupt status
 				// anyway, in case there's one pending.
@@ -1571,7 +1571,7 @@ static void nv_mcp55_freeze(struct ata_port *ap)
 	mask = readl(mmio_base + NV_INT_ENABLE_MCP55);
 	mask &= ~(NV_INT_ALL_MCP55 << shift);
 	writel(mask, mmio_base + NV_INT_ENABLE_MCP55);
-	ata_bmdma_freeze(ap);
+	ata_sff_freeze(ap);
 }
 
 static void nv_mcp55_thaw(struct ata_port *ap)
@@ -1585,7 +1585,7 @@ static void nv_mcp55_thaw(struct ata_port *ap)
 	mask = readl(mmio_base + NV_INT_ENABLE_MCP55);
 	mask |= (NV_INT_MASK_MCP55 << shift);
 	writel(mask, mmio_base + NV_INT_ENABLE_MCP55);
-	ata_bmdma_thaw(ap);
+	ata_sff_thaw(ap);
 }
 
 static int nv_hardreset(struct ata_link *link, unsigned int *class,
@@ -1597,7 +1597,7 @@ static int nv_hardreset(struct ata_link *link, unsigned int *class,
 	 * some controllers.  Don't classify on hardreset.  For more
 	 * info, see http://bugzilla.kernel.org/show_bug.cgi?id=3352
 	 */
-	return sata_std_hardreset(link, &dummy, deadline);
+	return sata_sff_hardreset(link, &dummy, deadline);
 }
 
 static void nv_adma_error_handler(struct ata_port *ap)
@@ -1653,7 +1653,7 @@ static void nv_adma_error_handler(struct ata_port *ap)
 		readw(mmio + NV_ADMA_CTL);	/* flush posted write */
 	}
 
-	ata_bmdma_error_handler(ap);
+	ata_sff_error_handler(ap);
 }
 
 static void nv_swncq_qc_to_dq(struct ata_port *ap, struct ata_queued_cmd *qc)
@@ -1779,7 +1779,7 @@ static void nv_swncq_error_handler(struct ata_port *ap)
 		ehc->i.action |= ATA_EH_RESET;
 	}
 
-	ata_bmdma_error_handler(ap);
+	ata_sff_error_handler(ap);
 }
 
 #ifdef CONFIG_PM
@@ -1925,7 +1925,7 @@ static int nv_swncq_port_start(struct ata_port *ap)
 static void nv_swncq_qc_prep(struct ata_queued_cmd *qc)
 {
 	if (qc->tf.protocol != ATA_PROT_NCQ) {
-		ata_qc_prep(qc);
+		ata_sff_qc_prep(qc);
 		return;
 	}
 
@@ -2001,7 +2001,7 @@ static unsigned int nv_swncq_qc_issue(struct ata_queued_cmd *qc)
 	struct nv_swncq_port_priv *pp = ap->private_data;
 
 	if (qc->tf.protocol != ATA_PROT_NCQ)
-		return ata_qc_issue_prot(qc);
+		return ata_sff_qc_issue(qc);
 
 	DPRINTK("Enter\n");
 
@@ -2350,7 +2350,7 @@ static int nv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	ppi[0] = &nv_port_info[type];
 	ipriv = ppi[0]->private_data;
-	rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
+	rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
 	if (rc)
 		return rc;
 
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index 5a0a03a08abc..9923e860eae3 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -143,7 +143,7 @@ static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile
 static int pdc_check_atapi_dma(struct ata_queued_cmd *qc);
 static int pdc_old_sata_check_atapi_dma(struct ata_queued_cmd *qc);
 static void pdc_irq_clear(struct ata_port *ap);
-static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc);
+static unsigned int pdc_qc_issue(struct ata_queued_cmd *qc);
 static void pdc_freeze(struct ata_port *ap);
 static void pdc_sata_freeze(struct ata_port *ap);
 static void pdc_thaw(struct ata_port *ap);
@@ -166,7 +166,7 @@ static const struct ata_port_operations pdc_common_ops = {
 	.exec_command		= pdc_exec_command_mmio,
 	.check_atapi_dma	= pdc_check_atapi_dma,
 	.qc_prep		= pdc_qc_prep,
-	.qc_issue		= pdc_qc_issue_prot,
+	.qc_issue		= pdc_qc_issue,
 	.irq_clear		= pdc_irq_clear,
 
 	.post_internal_cmd	= pdc_post_internal_cmd,
@@ -894,7 +894,7 @@ static inline void pdc_packet_start(struct ata_queued_cmd *qc)
 	readl(ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); /* flush */
 }
 
-static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int pdc_qc_issue(struct ata_queued_cmd *qc)
 {
 	switch (qc->tf.protocol) {
 	case ATAPI_PROT_NODATA:
@@ -914,20 +914,20 @@ static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc)
 		break;
 	}
 
-	return ata_qc_issue_prot(qc);
+	return ata_sff_qc_issue(qc);
 }
 
 static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
 {
 	WARN_ON(tf->protocol == ATA_PROT_DMA || tf->protocol == ATAPI_PROT_DMA);
-	ata_tf_load(ap, tf);
+	ata_sff_tf_load(ap, tf);
 }
 
 static void pdc_exec_command_mmio(struct ata_port *ap,
 				  const struct ata_taskfile *tf)
 {
 	WARN_ON(tf->protocol == ATA_PROT_DMA || tf->protocol == ATAPI_PROT_DMA);
-	ata_exec_command(ap, tf);
+	ata_sff_exec_command(ap, tf);
 }
 
 static int pdc_check_atapi_dma(struct ata_queued_cmd *qc)
diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c
index 2ceb0990bcd8..1600107047cf 100644
--- a/drivers/ata/sata_qstor.c
+++ b/drivers/ata/sata_qstor.c
@@ -239,7 +239,7 @@ static int qs_prereset(struct ata_link *link, unsigned long deadline)
 	struct ata_port *ap = link->ap;
 
 	qs_reset_channel_logic(ap);
-	return ata_std_prereset(link, deadline);
+	return ata_sff_prereset(link, deadline);
 }
 
 static int qs_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val)
@@ -303,7 +303,7 @@ static void qs_qc_prep(struct ata_queued_cmd *qc)
 
 	qs_enter_reg_mode(qc->ap);
 	if (qc->tf.protocol != ATA_PROT_DMA) {
-		ata_qc_prep(qc);
+		ata_sff_qc_prep(qc);
 		return;
 	}
 
@@ -362,7 +362,7 @@ static unsigned int qs_qc_issue(struct ata_queued_cmd *qc)
 	}
 
 	pp->state = qs_state_mmio;
-	return ata_qc_issue_prot(qc);
+	return ata_sff_qc_issue(qc);
 }
 
 static void qs_do_or_die(struct ata_queued_cmd *qc, u8 status)
@@ -451,7 +451,7 @@ static inline unsigned int qs_intr_mmio(struct ata_host *host)
 				 * and pretend we knew it was ours.. (ugh).
 				 * This does not affect packet mode.
 				 */
-				ata_check_status(ap);
+				ata_sff_check_status(ap);
 				handled = 1;
 				continue;
 			}
@@ -459,7 +459,7 @@ static inline unsigned int qs_intr_mmio(struct ata_host *host)
 			if (!pp || pp->state != qs_state_mmio)
 				continue;
 			if (!(qc->tf.flags & ATA_TFLAG_POLLING))
-				handled |= ata_host_intr(ap, qc);
+				handled |= ata_sff_host_intr(ap, qc);
 		}
 	}
 	return handled;
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 659dfcbdc1b2..987313b68f3b 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -410,10 +410,10 @@ static void sil_host_intr(struct ata_port *ap, u32 bmdma2)
 		goto err_hsm;
 
 	/* ack bmdma irq events */
-	ata_bmdma_irq_clear(ap);
+	ata_sff_irq_clear(ap);
 
 	/* kick HSM in the ass */
-	ata_hsm_move(ap, qc, status, 0);
+	ata_sff_hsm_move(ap, qc, status, 0);
 
 	if (unlikely(qc->err_mask) && ata_is_dma(qc->tf.protocol))
 		ata_ehi_push_desc(ehi, "BMDMA2 stat 0x%x", bmdma2);
@@ -481,7 +481,7 @@ static void sil_thaw(struct ata_port *ap)
 
 	/* clear IRQ */
 	ap->ops->check_status(ap);
-	ata_bmdma_irq_clear(ap);
+	ata_sff_irq_clear(ap);
 
 	/* turn on SATA IRQ if supported */
 	if (!(ap->flags & SIL_FLAG_NO_SATA_IRQ))
@@ -655,7 +655,7 @@ static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		ioaddr->ctl_addr = mmio_base + sil_port[i].ctl;
 		ioaddr->bmdma_addr = mmio_base + sil_port[i].bmdma;
 		ioaddr->scr_addr = mmio_base + sil_port[i].scr;
-		ata_std_ports(ioaddr);
+		ata_sff_std_ports(ioaddr);
 
 		ata_port_pbar_desc(ap, SIL_MMIO_BAR, -1, "mmio");
 		ata_port_pbar_desc(ap, SIL_MMIO_BAR, sil_port[i].tf, "tf");
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
index 9089c7ab5000..6b8e45ba32e8 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -309,7 +309,7 @@ static int sis_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		break;
 	}
 
-	rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
+	rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
 	if (rc)
 		return rc;
 
@@ -327,8 +327,8 @@ static int sis_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	pci_set_master(pdev);
 	pci_intx(pdev, 1);
-	return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
-				 &sis_sht);
+	return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+				 IRQF_SHARED, &sis_sht);
 }
 
 static int __init sis_init(void)
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index 8636f164256e..7b941106f7de 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -492,8 +492,8 @@ static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *en
 	writel(0x0, mmio_base + K2_SATA_SIM_OFFSET);
 
 	pci_set_master(pdev);
-	return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
-				 &k2_sata_sht);
+	return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+				 IRQF_SHARED, &k2_sata_sht);
 }
 
 /* 0x240 is device ID for Apple K2 device
diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index 8d7f39532d4a..40be2ff60902 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -232,7 +232,7 @@ static void pdc20621_get_from_dimm(struct ata_host *host,
 static void pdc20621_put_to_dimm(struct ata_host *host,
 				 void *psource, u32 offset, u32 size);
 static void pdc20621_irq_clear(struct ata_port *ap);
-static unsigned int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc);
+static unsigned int pdc20621_qc_issue(struct ata_queued_cmd *qc);
 
 
 static struct scsi_host_template pdc_sata_sht = {
@@ -244,17 +244,17 @@ static struct scsi_host_template pdc_sata_sht = {
 /* TODO: inherit from base port_ops after converting to new EH */
 static struct ata_port_operations pdc_20621_ops = {
 	.tf_load		= pdc_tf_load_mmio,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
+	.tf_read		= ata_sff_tf_read,
+	.check_status		= ata_sff_check_status,
 	.exec_command		= pdc_exec_command_mmio,
-	.dev_select		= ata_std_dev_select,
+	.dev_select		= ata_sff_dev_select,
 	.phy_reset		= pdc_20621_phy_reset,
 	.qc_prep		= pdc20621_qc_prep,
-	.qc_issue		= pdc20621_qc_issue_prot,
-	.data_xfer		= ata_data_xfer,
+	.qc_issue		= pdc20621_qc_issue,
+	.data_xfer		= ata_sff_data_xfer,
 	.eng_timeout		= pdc_eng_timeout,
 	.irq_clear		= pdc20621_irq_clear,
-	.irq_on			= ata_irq_on,
+	.irq_on			= ata_sff_irq_on,
 	.port_start		= pdc_port_start,
 };
 
@@ -682,7 +682,7 @@ static void pdc20621_packet_start(struct ata_queued_cmd *qc)
 	}
 }
 
-static unsigned int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int pdc20621_qc_issue(struct ata_queued_cmd *qc)
 {
 	switch (qc->tf.protocol) {
 	case ATA_PROT_DMA:
@@ -698,7 +698,7 @@ static unsigned int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc)
 		break;
 	}
 
-	return ata_qc_issue_prot(qc);
+	return ata_sff_qc_issue(qc);
 }
 
 static inline unsigned int pdc20621_host_intr(struct ata_port *ap,
@@ -770,7 +770,7 @@ static inline unsigned int pdc20621_host_intr(struct ata_port *ap,
 	/* command completion, but no data xfer */
 	} else if (qc->tf.protocol == ATA_PROT_NODATA) {
 
-		status = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
+		status = ata_sff_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
 		DPRINTK("BUS_NODATA (drv_stat 0x%X)\n", status);
 		qc->err_mask |= ac_err_mask(status);
 		ata_qc_complete(qc);
@@ -879,7 +879,7 @@ static void pdc_eng_timeout(struct ata_port *ap)
 		break;
 
 	default:
-		drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
+		drv_stat = ata_sff_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
 
 		ata_port_printk(ap, KERN_ERR,
 				"unknown timeout, cmd 0x%x stat 0x%x\n",
@@ -898,7 +898,7 @@ static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
 {
 	WARN_ON(tf->protocol == ATA_PROT_DMA ||
 		tf->protocol == ATA_PROT_NODATA);
-	ata_tf_load(ap, tf);
+	ata_sff_tf_load(ap, tf);
 }
 
 
@@ -906,7 +906,7 @@ static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile
 {
 	WARN_ON(tf->protocol == ATA_PROT_DMA ||
 		tf->protocol == ATA_PROT_NODATA);
-	ata_exec_command(ap, tf);
+	ata_sff_exec_command(ap, tf);
 }
 
 
diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c
index 6ecd13fefa1a..f277cea904ce 100644
--- a/drivers/ata/sata_uli.c
+++ b/drivers/ata/sata_uli.c
@@ -175,11 +175,11 @@ static int uli_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	host->private_data = hpriv;
 
 	/* the first two ports are standard SFF */
-	rc = ata_pci_init_sff_host(host);
+	rc = ata_pci_sff_init_host(host);
 	if (rc)
 		return rc;
 
-	rc = ata_pci_init_bmdma(host);
+	rc = ata_pci_bmdma_init(host);
 	if (rc)
 		return rc;
 
@@ -200,7 +200,7 @@ static int uli_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 			((unsigned long)iomap[1] | ATA_PCI_CTL_OFS) + 4;
 		ioaddr->bmdma_addr = iomap[4] + 16;
 		hpriv->scr_cfg_addr[2] = ULI5287_BASE + ULI5287_OFFS*4;
-		ata_std_ports(ioaddr);
+		ata_sff_std_ports(ioaddr);
 
 		ata_port_desc(host->ports[2],
 			"cmd 0x%llx ctl 0x%llx bmdma 0x%llx",
@@ -215,7 +215,7 @@ static int uli_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 			((unsigned long)iomap[3] | ATA_PCI_CTL_OFS) + 4;
 		ioaddr->bmdma_addr = iomap[4] + 24;
 		hpriv->scr_cfg_addr[3] = ULI5287_BASE + ULI5287_OFFS*5;
-		ata_std_ports(ioaddr);
+		ata_sff_std_ports(ioaddr);
 
 		ata_port_desc(host->ports[2],
 			"cmd 0x%llx ctl 0x%llx bmdma 0x%llx",
@@ -242,8 +242,8 @@ static int uli_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	pci_set_master(pdev);
 	pci_intx(pdev, 1);
-	return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
-				 &uli_sht);
+	return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+				 IRQF_SHARED, &uli_sht);
 }
 
 static int __init uli_init(void)
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 4bc6e849af2c..9323bc2a2785 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -174,7 +174,7 @@ static void svia_noop_freeze(struct ata_port *ap)
 	 * certain way.  Leave it alone and just clear pending IRQ.
 	 */
 	ap->ops->check_status(ap);
-	ata_bmdma_irq_clear(ap);
+	ata_sff_irq_clear(ap);
 }
 
 /**
@@ -242,7 +242,7 @@ static int vt6420_prereset(struct ata_link *link, unsigned long deadline)
 
  skip_scr:
 	/* wait for !BSY */
-	ata_wait_ready(ap, deadline);
+	ata_sff_wait_ready(ap, deadline);
 
 	return 0;
 }
@@ -304,7 +304,7 @@ static void vt6421_init_addrs(struct ata_port *ap)
 	ioaddr->bmdma_addr = bmdma_addr;
 	ioaddr->scr_addr = vt6421_scr_addr(iomap[5], ap->port_no);
 
-	ata_std_ports(ioaddr);
+	ata_sff_std_ports(ioaddr);
 
 	ata_port_pbar_desc(ap, ap->port_no, -1, "port");
 	ata_port_pbar_desc(ap, 4, ap->port_no * 8, "bmdma");
@@ -316,7 +316,7 @@ static int vt6420_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
 	struct ata_host *host;
 	int rc;
 
-	rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
+	rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
 	if (rc)
 		return rc;
 	*r_host = host;
@@ -448,8 +448,8 @@ static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	svia_configure(pdev);
 
 	pci_set_master(pdev);
-	return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
-				 &svia_sht);
+	return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+				 IRQF_SHARED, &svia_sht);
 }
 
 static int __init svia_init(void)
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index fb3a88722664..2c3c7693c750 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -200,7 +200,7 @@ static void vsc_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
 	struct ata_ioports *ioaddr = &ap->ioaddr;
 	u16 nsect, lbal, lbam, lbah, feature;
 
-	tf->command = ata_check_status(ap);
+	tf->command = ata_sff_check_status(ap);
 	tf->device = readw(ioaddr->device_addr);
 	feature = readw(ioaddr->error_addr);
 	nsect = readw(ioaddr->nsect_addr);
@@ -243,7 +243,7 @@ static void vsc_port_intr(u8 port_status, struct ata_port *ap)
 
 	qc = ata_qc_from_tag(ap, ap->link.active_tag);
 	if (qc && likely(!(qc->tf.flags & ATA_TFLAG_POLLING)))
-		handled = ata_host_intr(ap, qc);
+		handled = ata_sff_host_intr(ap, qc);
 
 	/* We received an interrupt during a polled command,
 	 * or some other spurious condition.  Interrupt reporting
-- 
cgit v1.2.2


From 5682ed33aae05d10a25c95633ef9d9c062825888 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Mon, 7 Apr 2008 22:47:16 +0900
Subject: libata: rename SFF port ops

Add sff_ prefix to SFF specific port ops.

This rename is in preparation of separating SFF support out of libata
core layer.  This patch strictly renames ops and doesn't introduce any
behavior difference.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/ahci.c           |   6 +--
 drivers/ata/libata-core.c    |  18 +++----
 drivers/ata/libata-scsi.c    |   2 +-
 drivers/ata/libata-sff.c     | 109 ++++++++++++++++++++++---------------------
 drivers/ata/pata_bf54x.c     |  20 ++++----
 drivers/ata/pata_cmd640.c    |   2 +-
 drivers/ata/pata_icside.c    |   4 +-
 drivers/ata/pata_it821x.c    |   2 +-
 drivers/ata/pata_ixp4xx_cf.c |   2 +-
 drivers/ata/pata_legacy.c    |  14 +++---
 drivers/ata/pata_mpc52xx.c   |   2 +-
 drivers/ata/pata_ninja32.c   |   2 +-
 drivers/ata/pata_ns87415.c   |   8 ++--
 drivers/ata/pata_pcmcia.c    |   4 +-
 drivers/ata/pata_platform.c  |   2 +-
 drivers/ata/pata_qdi.c       |   2 +-
 drivers/ata/pata_rb500_cf.c  |   4 +-
 drivers/ata/pata_scc.c       |  42 ++++++++---------
 drivers/ata/pata_via.c       |   2 +-
 drivers/ata/pata_winbond.c   |   2 +-
 drivers/ata/sata_fsl.c       |   6 +--
 drivers/ata/sata_inic162x.c  |  12 ++---
 drivers/ata/sata_nv.c        |  20 ++++----
 drivers/ata/sata_promise.c   |   6 +--
 drivers/ata/sata_sil.c       |   6 +--
 drivers/ata/sata_sil24.c     |   6 +--
 drivers/ata/sata_svw.c       |  10 ++--
 drivers/ata/sata_sx4.c       |  16 +++----
 drivers/ata/sata_via.c       |   2 +-
 drivers/ata/sata_vsc.c       |   6 +--
 30 files changed, 171 insertions(+), 168 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 771509c9a3fb..c5e4501daa74 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -292,10 +292,10 @@ static struct scsi_host_template ahci_sht = {
 static struct ata_port_operations ahci_ops = {
 	.inherits		= &sata_pmp_port_ops,
 
-	.check_status		= ahci_check_status,
-	.check_altstatus	= ahci_check_status,
+	.sff_check_status	= ahci_check_status,
+	.sff_check_altstatus	= ahci_check_status,
 
-	.tf_read		= ahci_tf_read,
+	.sff_tf_read		= ahci_tf_read,
 	.qc_defer		= sata_pmp_qc_defer_cmd_switch,
 	.qc_prep		= ahci_qc_prep,
 	.qc_issue		= ahci_qc_issue,
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index cbdbfb5eaeaa..a01e02c5ce7a 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -74,7 +74,7 @@ const unsigned long sata_deb_timing_hotplug[]		= {  25,  500, 2000 };
 const unsigned long sata_deb_timing_long[]		= { 100, 2000, 5000 };
 
 const struct ata_port_operations ata_base_port_ops = {
-	.irq_clear		= ata_noop_irq_clear,
+	.sff_irq_clear		= ata_noop_irq_clear,
 	.prereset		= ata_sff_prereset,
 	.hardreset		= sata_sff_hardreset,
 	.postreset		= ata_sff_postreset,
@@ -85,7 +85,7 @@ const struct ata_port_operations sata_port_ops = {
 	.inherits		= &ata_base_port_ops,
 
 	.qc_defer		= ata_std_qc_defer,
-	.dev_select		= ata_noop_dev_select,
+	.sff_dev_select		= ata_noop_dev_select,
 };
 
 const struct ata_port_operations sata_pmp_port_ops = {
@@ -3563,9 +3563,9 @@ void ata_sff_postreset(struct ata_link *link, unsigned int *classes)
 
 	/* is double-select really necessary? */
 	if (classes[0] != ATA_DEV_NONE)
-		ap->ops->dev_select(ap, 1);
+		ap->ops->sff_dev_select(ap, 1);
 	if (classes[1] != ATA_DEV_NONE)
-		ap->ops->dev_select(ap, 0);
+		ap->ops->sff_dev_select(ap, 0);
 
 	/* bail out if no device is present */
 	if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) {
@@ -4416,7 +4416,7 @@ static void fill_result_tf(struct ata_queued_cmd *qc)
 	struct ata_port *ap = qc->ap;
 
 	qc->result_tf.flags = qc->tf.flags;
-	ap->ops->tf_read(ap, &qc->result_tf);
+	ap->ops->sff_tf_read(ap, &qc->result_tf);
 }
 
 static void ata_verify_xfer(struct ata_queued_cmd *qc)
@@ -6049,16 +6049,16 @@ static unsigned int ata_dummy_qc_issue(struct ata_queued_cmd *qc)
 }
 
 struct ata_port_operations ata_dummy_port_ops = {
-	.check_status		= ata_dummy_check_status,
-	.check_altstatus	= ata_dummy_check_status,
-	.dev_select		= ata_noop_dev_select,
+	.sff_check_status	= ata_dummy_check_status,
+	.sff_check_altstatus	= ata_dummy_check_status,
+	.sff_dev_select		= ata_noop_dev_select,
 	.qc_prep		= ata_noop_qc_prep,
 	.qc_issue		= ata_dummy_qc_issue,
 	.freeze			= ata_dummy_noret,
 	.thaw			= ata_dummy_noret,
 	.error_handler		= ata_dummy_noret,
 	.post_internal_cmd	= ata_dummy_qc_noret,
-	.irq_clear		= ata_dummy_noret,
+	.sff_irq_clear		= ata_dummy_noret,
 	.port_start		= ata_dummy_ret0,
 	.port_stop		= ata_dummy_noret,
 };
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 798ba5e45710..f8be92836a6e 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2393,7 +2393,7 @@ static void atapi_request_sense(struct ata_queued_cmd *qc)
 	/* FIXME: is this needed? */
 	memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
 
-	ap->ops->tf_read(ap, &qc->tf);
+	ap->ops->sff_tf_read(ap, &qc->tf);
 
 	/* fill these in, for the case where they are -not- overwritten */
 	cmd->sense_buffer[0] = 0x70;
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 8544321293d4..04024a556660 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -51,13 +51,13 @@ const struct ata_port_operations ata_sff_port_ops = {
 	.error_handler		= ata_sff_error_handler,
 	.post_internal_cmd	= ata_sff_post_internal_cmd,
 
-	.dev_select		= ata_sff_dev_select,
-	.check_status		= ata_sff_check_status,
-	.tf_load		= ata_sff_tf_load,
-	.tf_read		= ata_sff_tf_read,
-	.exec_command		= ata_sff_exec_command,
-	.data_xfer		= ata_sff_data_xfer,
-	.irq_on			= ata_sff_irq_on,
+	.sff_dev_select		= ata_sff_dev_select,
+	.sff_check_status	= ata_sff_check_status,
+	.sff_tf_load		= ata_sff_tf_load,
+	.sff_tf_read		= ata_sff_tf_read,
+	.sff_exec_command	= ata_sff_exec_command,
+	.sff_data_xfer		= ata_sff_data_xfer,
+	.sff_irq_on		= ata_sff_irq_on,
 
 	.port_start		= ata_sff_port_start,
 };
@@ -71,7 +71,7 @@ const struct ata_port_operations ata_bmdma_port_ops = {
 	.bmdma_start		= ata_bmdma_start,
 	.bmdma_stop		= ata_bmdma_stop,
 	.bmdma_status		= ata_bmdma_status,
-	.irq_clear		= ata_sff_irq_clear,
+	.sff_irq_clear		= ata_sff_irq_clear,
 };
 
 /**
@@ -245,8 +245,8 @@ u8 ata_sff_check_status(struct ata_port *ap)
  */
 u8 ata_sff_altstatus(struct ata_port *ap)
 {
-	if (ap->ops->check_altstatus)
-		return ap->ops->check_altstatus(ap);
+	if (ap->ops->sff_check_altstatus)
+		return ap->ops->sff_check_altstatus(ap);
 
 	return ioread8(ap->ioaddr.altstatus_addr);
 }
@@ -290,7 +290,7 @@ int ata_sff_busy_sleep(struct ata_port *ap,
 	while (status != 0xff && (status & ATA_BUSY) &&
 	       time_before(jiffies, timeout)) {
 		msleep(50);
-		status = ap->ops->check_status(ap);
+		status = ap->ops->sff_check_status(ap);
 	}
 
 	if (status == 0xff)
@@ -326,7 +326,7 @@ int ata_sff_wait_ready(struct ata_port *ap, unsigned long deadline)
 	int warned = 0;
 
 	while (1) {
-		u8 status = ap->ops->check_status(ap);
+		u8 status = ap->ops->sff_check_status(ap);
 		unsigned long now = jiffies;
 
 		if (!(status & ATA_BUSY))
@@ -403,7 +403,7 @@ void ata_dev_select(struct ata_port *ap, unsigned int device,
 	if (wait)
 		ata_wait_idle(ap);
 
-	ap->ops->dev_select(ap, device);
+	ap->ops->sff_dev_select(ap, device);
 
 	if (wait) {
 		if (can_sleep && ap->link.device[device].class == ATA_DEV_ATAPI)
@@ -434,7 +434,7 @@ u8 ata_sff_irq_on(struct ata_port *ap)
 		iowrite8(ap->ctl, ioaddr->ctl_addr);
 	tmp = ata_wait_idle(ap);
 
-	ap->ops->irq_clear(ap);
+	ap->ops->sff_irq_clear(ap);
 
 	return tmp;
 }
@@ -593,8 +593,8 @@ void ata_sff_exec_command(struct ata_port *ap, const struct ata_taskfile *tf)
 static inline void ata_tf_to_host(struct ata_port *ap,
 				  const struct ata_taskfile *tf)
 {
-	ap->ops->tf_load(ap, tf);
-	ap->ops->exec_command(ap, tf);
+	ap->ops->sff_tf_load(ap, tf);
+	ap->ops->sff_exec_command(ap, tf);
 }
 
 /**
@@ -709,13 +709,15 @@ static void ata_pio_sector(struct ata_queued_cmd *qc)
 		buf = kmap_atomic(page, KM_IRQ0);
 
 		/* do the actual data transfer */
-		ap->ops->data_xfer(qc->dev, buf + offset, qc->sect_size, do_write);
+		ap->ops->sff_data_xfer(qc->dev, buf + offset, qc->sect_size,
+				       do_write);
 
 		kunmap_atomic(buf, KM_IRQ0);
 		local_irq_restore(flags);
 	} else {
 		buf = page_address(page);
-		ap->ops->data_xfer(qc->dev, buf + offset, qc->sect_size, do_write);
+		ap->ops->sff_data_xfer(qc->dev, buf + offset, qc->sect_size,
+				       do_write);
 	}
 
 	qc->curbytes += qc->sect_size;
@@ -772,7 +774,7 @@ static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc)
 	DPRINTK("send cdb\n");
 	WARN_ON(qc->dev->cdb_len < 12);
 
-	ap->ops->data_xfer(qc->dev, qc->cdb, qc->dev->cdb_len, 1);
+	ap->ops->sff_data_xfer(qc->dev, qc->cdb, qc->dev->cdb_len, 1);
 	ata_sff_altstatus(ap); /* flush */
 
 	switch (qc->tf.protocol) {
@@ -844,13 +846,13 @@ next_sg:
 		buf = kmap_atomic(page, KM_IRQ0);
 
 		/* do the actual data transfer */
-		consumed = ap->ops->data_xfer(dev,  buf + offset, count, rw);
+		consumed = ap->ops->sff_data_xfer(dev,  buf + offset, count, rw);
 
 		kunmap_atomic(buf, KM_IRQ0);
 		local_irq_restore(flags);
 	} else {
 		buf = page_address(page);
-		consumed = ap->ops->data_xfer(dev,  buf + offset, count, rw);
+		consumed = ap->ops->sff_data_xfer(dev,  buf + offset, count, rw);
 	}
 
 	bytes -= min(bytes, consumed);
@@ -893,7 +895,7 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc)
 	 * error, qc->result_tf is later overwritten by ata_qc_complete().
 	 * So, the correctness of qc->result_tf is not affected.
 	 */
-	ap->ops->tf_read(ap, &qc->result_tf);
+	ap->ops->sff_tf_read(ap, &qc->result_tf);
 	ireason = qc->result_tf.nsect;
 	bc_lo = qc->result_tf.lbam;
 	bc_hi = qc->result_tf.lbah;
@@ -979,7 +981,7 @@ static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq)
 			qc = ata_qc_from_tag(ap, qc->tag);
 			if (qc) {
 				if (likely(!(qc->err_mask & AC_ERR_HSM))) {
-					ap->ops->irq_on(ap);
+					ap->ops->sff_irq_on(ap);
 					ata_qc_complete(qc);
 				} else
 					ata_port_freeze(ap);
@@ -995,7 +997,7 @@ static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq)
 	} else {
 		if (in_wq) {
 			spin_lock_irqsave(ap->lock, flags);
-			ap->ops->irq_on(ap);
+			ap->ops->sff_irq_on(ap);
 			ata_qc_complete(qc);
 			spin_unlock_irqrestore(ap->lock, flags);
 		} else
@@ -1345,7 +1347,7 @@ unsigned int ata_sff_qc_issue(struct ata_queued_cmd *qc)
 	case ATA_PROT_DMA:
 		WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING);
 
-		ap->ops->tf_load(ap, &qc->tf);	 /* load tf registers */
+		ap->ops->sff_tf_load(ap, &qc->tf);  /* load tf registers */
 		ap->ops->bmdma_setup(qc);	    /* set up bmdma */
 		ap->ops->bmdma_start(qc);	    /* initiate bmdma */
 		ap->hsm_task_state = HSM_ST_LAST;
@@ -1397,7 +1399,7 @@ unsigned int ata_sff_qc_issue(struct ata_queued_cmd *qc)
 	case ATAPI_PROT_DMA:
 		WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING);
 
-		ap->ops->tf_load(ap, &qc->tf);	 /* load tf registers */
+		ap->ops->sff_tf_load(ap, &qc->tf);  /* load tf registers */
 		ap->ops->bmdma_setup(qc);	    /* set up bmdma */
 		ap->hsm_task_state = HSM_ST_FIRST;
 
@@ -1486,12 +1488,12 @@ inline unsigned int ata_sff_host_intr(struct ata_port *ap,
 		goto idle_irq;
 
 	/* check main status, clearing INTRQ */
-	status = ap->ops->check_status(ap);
+	status = ap->ops->sff_check_status(ap);
 	if (unlikely(status & ATA_BUSY))
 		goto idle_irq;
 
 	/* ack bmdma irq events */
-	ap->ops->irq_clear(ap);
+	ap->ops->sff_irq_clear(ap);
 
 	ata_sff_hsm_move(ap, qc, status, 0);
 
@@ -1506,8 +1508,8 @@ idle_irq:
 
 #ifdef ATA_IRQ_TRAP
 	if ((ap->stats.idle_irq % 1000) == 0) {
-		ap->ops->check_status(ap);
-		ap->ops->irq_clear(ap);
+		ap->ops->sff_check_status(ap);
+		ap->ops->sff_irq_clear(ap);
 		ata_port_printk(ap, KERN_WARNING, "irq trap\n");
 		return 1;
 	}
@@ -1582,9 +1584,9 @@ void ata_sff_freeze(struct ata_port *ap)
 	 * ATA_NIEN manipulation.  Also, many controllers fail to mask
 	 * previously pending IRQ on ATA_NIEN assertion.  Clear it.
 	 */
-	ap->ops->check_status(ap);
+	ap->ops->sff_check_status(ap);
 
-	ap->ops->irq_clear(ap);
+	ap->ops->sff_irq_clear(ap);
 }
 
 /**
@@ -1599,9 +1601,9 @@ void ata_sff_freeze(struct ata_port *ap)
 void ata_sff_thaw(struct ata_port *ap)
 {
 	/* clear & re-enable interrupts */
-	ap->ops->check_status(ap);
-	ap->ops->irq_clear(ap);
-	ap->ops->irq_on(ap);
+	ap->ops->sff_check_status(ap);
+	ap->ops->sff_irq_clear(ap);
+	ap->ops->sff_irq_on(ap);
 }
 
 /**
@@ -1626,7 +1628,7 @@ static unsigned int ata_devchk(struct ata_port *ap, unsigned int device)
 	struct ata_ioports *ioaddr = &ap->ioaddr;
 	u8 nsect, lbal;
 
-	ap->ops->dev_select(ap, device);
+	ap->ops->sff_dev_select(ap, device);
 
 	iowrite8(0x55, ioaddr->nsect_addr);
 	iowrite8(0xaa, ioaddr->lbal_addr);
@@ -1675,11 +1677,11 @@ unsigned int ata_sff_dev_classify(struct ata_device *dev, int present,
 	unsigned int class;
 	u8 err;
 
-	ap->ops->dev_select(ap, dev->devno);
+	ap->ops->sff_dev_select(ap, dev->devno);
 
 	memset(&tf, 0, sizeof(tf));
 
-	ap->ops->tf_read(ap, &tf);
+	ap->ops->sff_tf_read(ap, &tf);
 	err = tf.feature;
 	if (r_err)
 		*r_err = err;
@@ -1709,7 +1711,8 @@ unsigned int ata_sff_dev_classify(struct ata_device *dev, int present,
 			class = ATA_DEV_ATA;
 		else
 			class = ATA_DEV_NONE;
-	} else if ((class == ATA_DEV_ATA) && (ap->ops->check_status(ap) == 0))
+	} else if ((class == ATA_DEV_ATA) &&
+		   (ap->ops->sff_check_status(ap) == 0))
 		class = ATA_DEV_NONE;
 
 	return class;
@@ -1741,7 +1744,7 @@ static int ata_bus_post_reset(struct ata_port *ap, unsigned int devmask,
 	if (dev1) {
 		int i;
 
-		ap->ops->dev_select(ap, 1);
+		ap->ops->sff_dev_select(ap, 1);
 
 		/* Wait for register access.  Some ATAPI devices fail
 		 * to set nsect/lbal after reset, so don't waste too
@@ -1766,11 +1769,11 @@ static int ata_bus_post_reset(struct ata_port *ap, unsigned int devmask,
 	}
 
 	/* is all this really necessary? */
-	ap->ops->dev_select(ap, 0);
+	ap->ops->sff_dev_select(ap, 0);
 	if (dev1)
-		ap->ops->dev_select(ap, 1);
+		ap->ops->sff_dev_select(ap, 1);
 	if (dev0)
-		ap->ops->dev_select(ap, 0);
+		ap->ops->sff_dev_select(ap, 0);
 
 	return ret;
 }
@@ -1820,7 +1823,7 @@ void ata_sff_wait_after_reset(struct ata_port *ap, unsigned long deadline)
 	 */
 	if (ap->flags & ATA_FLAG_SATA) {
 		while (1) {
-			u8 status = ap->ops->check_status(ap);
+			u8 status = ap->ops->sff_check_status(ap);
 
 			if (status != 0xff || time_after(jiffies, deadline))
 				return;
@@ -1851,7 +1854,7 @@ static int ata_bus_softreset(struct ata_port *ap, unsigned int devmask,
 	 * the bus shows 0xFF because the odd clown forgets the D7
 	 * pulldown resistor.
 	 */
-	if (ap->ops->check_status(ap) == 0xFF)
+	if (ap->ops->sff_check_status(ap) == 0xFF)
 		return -ENODEV;
 
 	return ata_bus_post_reset(ap, devmask, deadline);
@@ -1894,7 +1897,7 @@ int ata_sff_softreset(struct ata_link *link, unsigned int *classes,
 		devmask |= (1 << 1);
 
 	/* select device 0 again */
-	ap->ops->dev_select(ap, 0);
+	ap->ops->sff_dev_select(ap, 0);
 
 	/* issue bus reset */
 	DPRINTK("about to softreset, devmask=%x\n", devmask);
@@ -1977,7 +1980,7 @@ int sata_sff_hardreset(struct ata_link *link, unsigned int *class,
 		return rc;
 	}
 
-	ap->ops->dev_select(ap, 0);	/* probably unnecessary */
+	ap->ops->sff_dev_select(ap, 0);	/* probably unnecessary */
 
 	*class = ata_sff_dev_classify(link->device, 1, NULL);
 
@@ -2035,8 +2038,8 @@ void ata_sff_error_handler(struct ata_port *ap)
 	}
 
 	ata_sff_altstatus(ap);
-	ap->ops->check_status(ap);
-	ap->ops->irq_clear(ap);
+	ap->ops->sff_check_status(ap);
+	ap->ops->sff_irq_clear(ap);
 
 	spin_unlock_irqrestore(ap->lock, flags);
 
@@ -2153,7 +2156,7 @@ void ata_bmdma_setup(struct ata_queued_cmd *qc)
 	iowrite8(dmactl, ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
 
 	/* issue r/w command */
-	ap->ops->exec_command(ap, &qc->tf);
+	ap->ops->sff_exec_command(ap, &qc->tf);
 }
 
 /**
@@ -2277,7 +2280,7 @@ void ata_bus_reset(struct ata_port *ap)
 		devmask |= (1 << 1);
 
 	/* select device 0 again */
-	ap->ops->dev_select(ap, 0);
+	ap->ops->sff_dev_select(ap, 0);
 
 	/* issue bus reset */
 	if (ap->flags & ATA_FLAG_SRST) {
@@ -2295,9 +2298,9 @@ void ata_bus_reset(struct ata_port *ap)
 
 	/* is double-select really necessary? */
 	if (device[1].class != ATA_DEV_NONE)
-		ap->ops->dev_select(ap, 1);
+		ap->ops->sff_dev_select(ap, 1);
 	if (device[0].class != ATA_DEV_NONE)
-		ap->ops->dev_select(ap, 0);
+		ap->ops->sff_dev_select(ap, 0);
 
 	/* if no devices were detected, disable this port */
 	if ((device[0].class == ATA_DEV_NONE) &&
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index c854e882d4a9..d98bd7455e6b 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -1264,7 +1264,7 @@ static void bfin_freeze(struct ata_port *ap)
 	 * ATA_NIEN manipulation.  Also, many controllers fail to mask
 	 * previously pending IRQ on ATA_NIEN assertion.  Clear it.
 	 */
-	ap->ops->check_status(ap);
+	ap->ops->sff_check_status(ap);
 
 	bfin_irq_clear(ap);
 }
@@ -1357,18 +1357,18 @@ static const struct ata_port_operations bfin_pata_ops = {
 	.set_piomode		= bfin_set_piomode,
 	.set_dmamode		= bfin_set_dmamode,
 
-	.tf_load		= bfin_tf_load,
-	.tf_read		= bfin_tf_read,
-	.exec_command		= bfin_exec_command,
-	.check_status		= bfin_check_status,
-	.check_altstatus	= bfin_check_altstatus,
-	.dev_select		= bfin_dev_select,
+	.sff_tf_load		= bfin_tf_load,
+	.sff_tf_read		= bfin_tf_read,
+	.sff_exec_command	= bfin_exec_command,
+	.sff_check_status	= bfin_check_status,
+	.sff_check_altstatus	= bfin_check_altstatus,
+	.sff_dev_select		= bfin_dev_select,
 
 	.bmdma_setup		= bfin_bmdma_setup,
 	.bmdma_start		= bfin_bmdma_start,
 	.bmdma_stop		= bfin_bmdma_stop,
 	.bmdma_status		= bfin_bmdma_status,
-	.data_xfer		= bfin_data_xfer,
+	.sff_data_xfer		= bfin_data_xfer,
 
 	.qc_prep		= ata_noop_qc_prep,
 
@@ -1378,8 +1378,8 @@ static const struct ata_port_operations bfin_pata_ops = {
 	.postreset		= bfin_postreset,
 	.post_internal_cmd	= bfin_bmdma_stop,
 
-	.irq_clear		= bfin_irq_clear,
-	.irq_on			= bfin_irq_on,
+	.sff_irq_clear		= bfin_irq_clear,
+	.sff_irq_on		= bfin_irq_on,
 
 	.port_start		= bfin_port_start,
 	.port_stop		= bfin_port_stop,
diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c
index a907cf478891..2de30b990278 100644
--- a/drivers/ata/pata_cmd640.c
+++ b/drivers/ata/pata_cmd640.c
@@ -172,7 +172,7 @@ static struct scsi_host_template cmd640_sht = {
 static struct ata_port_operations cmd640_port_ops = {
 	.inherits	= &ata_bmdma_port_ops,
 	/* In theory xfer_noirq is not needed once we kill the prefetcher */
-	.data_xfer	= ata_sff_data_xfer_noirq,
+	.sff_data_xfer	= ata_sff_data_xfer_noirq,
 	.qc_issue	= cmd640_qc_issue,
 	.cable_detect	= ata_cable_40wire,
 	.set_piomode	= cmd640_set_piomode,
diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c
index 52de9f908fb0..17138436423d 100644
--- a/drivers/ata/pata_icside.c
+++ b/drivers/ata/pata_icside.c
@@ -250,7 +250,7 @@ static void pata_icside_bmdma_setup(struct ata_queued_cmd *qc)
 	set_dma_mode(state->dma, write ? DMA_MODE_WRITE : DMA_MODE_READ);
 
 	/* issue r/w command */
-	ap->ops->exec_command(ap, &qc->tf);
+	ap->ops->sff_exec_command(ap, &qc->tf);
 }
 
 static void pata_icside_bmdma_start(struct ata_queued_cmd *qc)
@@ -336,7 +336,7 @@ static struct ata_port_operations pata_icside_port_ops = {
 	.inherits		= &ata_sff_port_ops,
 	/* no need to build any PRD tables for DMA */
 	.qc_prep		= ata_noop_qc_prep,
-	.data_xfer		= ata_sff_data_xfer_noirq,
+	.sff_data_xfer		= ata_sff_data_xfer_noirq,
 	.bmdma_setup		= pata_icside_bmdma_setup,
 	.bmdma_start		= pata_icside_bmdma_start,
 	.bmdma_stop		= pata_icside_bmdma_stop,
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 88e37cfcfc4f..e10816931b2f 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -652,7 +652,7 @@ static struct ata_port_operations it821x_passthru_port_ops = {
 	.inherits	= &ata_bmdma_port_ops,
 
 	.check_atapi_dma= it821x_check_atapi_dma,
-	.dev_select 	= it821x_passthru_dev_select,
+	.sff_dev_select	= it821x_passthru_dev_select,
 	.bmdma_start 	= it821x_passthru_bmdma_start,
 	.bmdma_stop	= it821x_passthru_bmdma_stop,
 	.qc_issue	= it821x_passthru_qc_issue,
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index 283a8fba79b3..8a175f23b907 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -93,7 +93,7 @@ static struct scsi_host_template ixp4xx_sht = {
 
 static struct ata_port_operations ixp4xx_port_ops = {
 	.inherits		= &ata_sff_port_ops,
-	.data_xfer		= ixp4xx_mmio_data_xfer,
+	.sff_data_xfer		= ixp4xx_mmio_data_xfer,
 	.cable_detect		= ata_cable_40wire,
 	.set_mode		= ixp4xx_set_mode,
 };
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index f13f10a55ef3..7af4b29cc422 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -226,12 +226,12 @@ static const struct ata_port_operations legacy_base_port_ops = {
 
 static struct ata_port_operations simple_port_ops = {
 	.inherits	= &legacy_base_port_ops,
-	.data_xfer	= ata_sff_data_xfer_noirq,
+	.sff_data_xfer	= ata_sff_data_xfer_noirq,
 };
 
 static struct ata_port_operations legacy_port_ops = {
 	.inherits	= &legacy_base_port_ops,
-	.data_xfer	= ata_sff_data_xfer_noirq,
+	.sff_data_xfer	= ata_sff_data_xfer_noirq,
 	.set_mode	= legacy_set_mode,
 };
 
@@ -325,7 +325,7 @@ static unsigned int pdc_data_xfer_vlb(struct ata_device *dev,
 static struct ata_port_operations pdc20230_port_ops = {
 	.inherits	= &legacy_base_port_ops,
 	.set_piomode	= pdc20230_set_piomode,
-	.data_xfer	= pdc_data_xfer_vlb,
+	.sff_data_xfer	= pdc_data_xfer_vlb,
 };
 
 /*
@@ -775,19 +775,19 @@ static struct ata_port_operations qdi6500_port_ops = {
 	.inherits	= &legacy_base_port_ops,
 	.set_piomode	= qdi6500_set_piomode,
 	.qc_issue	= qdi_qc_issue,
-	.data_xfer	= vlb32_data_xfer,
+	.sff_data_xfer	= vlb32_data_xfer,
 };
 
 static struct ata_port_operations qdi6580_port_ops = {
 	.inherits	= &legacy_base_port_ops,
 	.set_piomode	= qdi6580_set_piomode,
-	.data_xfer	= vlb32_data_xfer,
+	.sff_data_xfer	= vlb32_data_xfer,
 };
 
 static struct ata_port_operations qdi6580dp_port_ops = {
 	.inherits	= &legacy_base_port_ops,
 	.set_piomode	= qdi6580dp_set_piomode,
-	.data_xfer	= vlb32_data_xfer,
+	.sff_data_xfer	= vlb32_data_xfer,
 };
 
 static DEFINE_SPINLOCK(winbond_lock);
@@ -858,7 +858,7 @@ static int winbond_port(struct platform_device *dev,
 static struct ata_port_operations winbond_port_ops = {
 	.inherits	= &legacy_base_port_ops,
 	.set_piomode	= winbond_set_piomode,
-	.data_xfer	= vlb32_data_xfer,
+	.sff_data_xfer	= vlb32_data_xfer,
 };
 
 static struct legacy_controller controllers[] = {
diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c
index 5d1d32a39c4d..bc79df6e7cb0 100644
--- a/drivers/ata/pata_mpc52xx.c
+++ b/drivers/ata/pata_mpc52xx.c
@@ -261,7 +261,7 @@ static struct scsi_host_template mpc52xx_ata_sht = {
 
 static struct ata_port_operations mpc52xx_ata_port_ops = {
 	.inherits		= &ata_sff_port_ops,
-	.dev_select		= mpc52xx_ata_dev_select,
+	.sff_dev_select		= mpc52xx_ata_dev_select,
 	.cable_detect		= ata_cable_40wire,
 	.set_piomode		= mpc52xx_ata_set_piomode,
 	.post_internal_cmd	= ATA_OP_NULL,
diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c
index c9c0ea67c71a..565e67cd13fa 100644
--- a/drivers/ata/pata_ninja32.c
+++ b/drivers/ata/pata_ninja32.c
@@ -84,7 +84,7 @@ static struct scsi_host_template ninja32_sht = {
 
 static struct ata_port_operations ninja32_port_ops = {
 	.inherits	= &ata_bmdma_port_ops,
-	.dev_select 	= ninja32_dev_select,
+	.sff_dev_select = ninja32_dev_select,
 	.cable_detect	= ata_cable_40wire,
 	.set_piomode	= ninja32_set_piomode,
 };
diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c
index 03a52cefc010..ae92b0049bd5 100644
--- a/drivers/ata/pata_ns87415.c
+++ b/drivers/ata/pata_ns87415.c
@@ -138,7 +138,7 @@ static void ns87415_bmdma_setup(struct ata_queued_cmd *qc)
 		dmactl |= ATA_DMA_WR;
 	iowrite8(dmactl, ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
 	/* issue r/w command */
-	ap->ops->exec_command(ap, &qc->tf);
+	ap->ops->sff_exec_command(ap, &qc->tf);
 }
 
 /**
@@ -306,7 +306,7 @@ static struct ata_port_operations ns87415_pata_ops = {
 	.bmdma_setup		= ns87415_bmdma_setup,
 	.bmdma_start		= ns87415_bmdma_start,
 	.bmdma_stop		= ns87415_bmdma_stop,
-	.irq_clear		= ns87415_irq_clear,
+	.sff_irq_clear		= ns87415_irq_clear,
 
 	.cable_detect		= ata_cable_40wire,
 	.set_piomode		= ns87415_set_piomode,
@@ -315,8 +315,8 @@ static struct ata_port_operations ns87415_pata_ops = {
 #if defined(CONFIG_SUPERIO)
 static struct ata_port_operations ns87560_pata_ops = {
 	.inherits		= &ns87415_pata_ops,
-	.tf_read		= ns87560_tf_read,
-	.check_status		= ns87560_check_status,
+	.sff_tf_read		= ns87560_tf_read,
+	.sff_check_status	= ns87560_check_status,
 	.bmdma_status		= ns87560_bmdma_status,
 };
 #endif
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 2e206c5f869a..3d39f9dfec5a 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -133,14 +133,14 @@ static struct scsi_host_template pcmcia_sht = {
 
 static struct ata_port_operations pcmcia_port_ops = {
 	.inherits	= &ata_sff_port_ops,
-	.data_xfer	= ata_sff_data_xfer_noirq,
+	.sff_data_xfer	= ata_sff_data_xfer_noirq,
 	.cable_detect	= ata_cable_40wire,
 	.set_mode	= pcmcia_set_mode,
 };
 
 static struct ata_port_operations pcmcia_8bit_port_ops = {
 	.inherits	= &ata_sff_port_ops,
-	.data_xfer	= ata_data_xfer_8bit,
+	.sff_data_xfer	= ata_data_xfer_8bit,
 	.cable_detect	= ata_cable_40wire,
 	.set_mode	= pcmcia_set_mode_8bit,
 };
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index 1edfc13d05d2..6527c56c34a3 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -52,7 +52,7 @@ static struct scsi_host_template pata_platform_sht = {
 
 static struct ata_port_operations pata_platform_port_ops = {
 	.inherits		= &ata_sff_port_ops,
-	.data_xfer		= ata_sff_data_xfer_noirq,
+	.sff_data_xfer		= ata_sff_data_xfer_noirq,
 	.cable_detect		= ata_cable_unknown,
 	.set_mode		= pata_platform_set_mode,
 	.port_start		= ATA_OP_NULL,
diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c
index 0d81dd5fdc38..bf45cf017753 100644
--- a/drivers/ata/pata_qdi.c
+++ b/drivers/ata/pata_qdi.c
@@ -160,7 +160,7 @@ static struct scsi_host_template qdi_sht = {
 static struct ata_port_operations qdi6500_port_ops = {
 	.inherits	= &ata_sff_port_ops,
 	.qc_issue	= qdi_qc_issue,
-	.data_xfer	= qdi_data_xfer,
+	.sff_data_xfer	= qdi_data_xfer,
 	.cable_detect	= ata_cable_40wire,
 	.set_piomode	= qdi6500_set_piomode,
 };
diff --git a/drivers/ata/pata_rb500_cf.c b/drivers/ata/pata_rb500_cf.c
index 5b23d79bc92b..800ae4601f44 100644
--- a/drivers/ata/pata_rb500_cf.c
+++ b/drivers/ata/pata_rb500_cf.c
@@ -119,8 +119,8 @@ static irqreturn_t rb500_pata_irq_handler(int irq, void *dev_instance)
 
 static struct ata_port_operations rb500_pata_port_ops = {
 	.inherits		= &ata_sff_port_ops,
-	.exec_command		= rb500_pata_exec_command,
-	.data_xfer		= rb500_pata_data_xfer,
+	.sff_exec_command	= rb500_pata_exec_command,
+	.sff_data_xfer		= rb500_pata_data_xfer,
 	.freeze			= rb500_pata_freeze,
 	.thaw			= rb500_pata_thaw,
 };
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index 701d0addae73..2b9da715c704 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -441,7 +441,7 @@ static void scc_bmdma_setup (struct ata_queued_cmd *qc)
 	out_be32(mmio + SCC_DMA_CMD, dmactl);
 
 	/* issue r/w command */
-	ap->ops->exec_command(ap, &qc->tf);
+	ap->ops->sff_exec_command(ap, &qc->tf);
 }
 
 /**
@@ -476,7 +476,7 @@ static unsigned int scc_devchk (struct ata_port *ap,
 	struct ata_ioports *ioaddr = &ap->ioaddr;
 	u8 nsect, lbal;
 
-	ap->ops->dev_select(ap, device);
+	ap->ops->sff_dev_select(ap, device);
 
 	out_be32(ioaddr->nsect_addr, 0x55);
 	out_be32(ioaddr->lbal_addr, 0xaa);
@@ -525,7 +525,7 @@ static int scc_bus_post_reset(struct ata_port *ap, unsigned int devmask,
 	while (dev1) {
 		u8 nsect, lbal;
 
-		ap->ops->dev_select(ap, 1);
+		ap->ops->sff_dev_select(ap, 1);
 		nsect = in_be32(ioaddr->nsect_addr);
 		lbal = in_be32(ioaddr->lbal_addr);
 		if ((nsect == 1) && (lbal == 1))
@@ -541,11 +541,11 @@ static int scc_bus_post_reset(struct ata_port *ap, unsigned int devmask,
 	}
 
 	/* is all this really necessary? */
-	ap->ops->dev_select(ap, 0);
+	ap->ops->sff_dev_select(ap, 0);
 	if (dev1)
-		ap->ops->dev_select(ap, 1);
+		ap->ops->sff_dev_select(ap, 1);
 	if (dev0)
-		ap->ops->dev_select(ap, 0);
+		ap->ops->sff_dev_select(ap, 0);
 
 	return 0;
 }
@@ -616,7 +616,7 @@ static int scc_softreset(struct ata_link *link, unsigned int *classes,
 		devmask |= (1 << 1);
 
 	/* select device 0 again */
-	ap->ops->dev_select(ap, 0);
+	ap->ops->sff_dev_select(ap, 0);
 
 	/* issue bus reset */
 	DPRINTK("about to softreset, devmask=%x\n", devmask);
@@ -829,7 +829,7 @@ static u8 scc_irq_on (struct ata_port *ap)
 	out_be32(ioaddr->ctl_addr, ap->ctl);
 	tmp = ata_wait_idle(ap);
 
-	ap->ops->irq_clear(ap);
+	ap->ops->sff_irq_clear(ap);
 
 	return tmp;
 }
@@ -854,9 +854,9 @@ static void scc_freeze (struct ata_port *ap)
 	 * ATA_NIEN manipulation.  Also, many controllers fail to mask
 	 * previously pending IRQ on ATA_NIEN assertion.  Clear it.
 	 */
-	ap->ops->check_status(ap);
+	ap->ops->sff_check_status(ap);
 
-	ap->ops->irq_clear(ap);
+	ap->ops->sff_irq_clear(ap);
 }
 
 /**
@@ -887,9 +887,9 @@ static void scc_postreset(struct ata_link *link, unsigned int *classes)
 
 	/* is double-select really necessary? */
 	if (classes[0] != ATA_DEV_NONE)
-		ap->ops->dev_select(ap, 1);
+		ap->ops->sff_dev_select(ap, 1);
 	if (classes[1] != ATA_DEV_NONE)
-		ap->ops->dev_select(ap, 0);
+		ap->ops->sff_dev_select(ap, 0);
 
 	/* bail out if no device is present */
 	if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) {
@@ -967,18 +967,18 @@ static struct ata_port_operations scc_pata_ops = {
 	.set_dmamode		= scc_set_dmamode,
 	.mode_filter		= scc_mode_filter,
 
-	.tf_load		= scc_tf_load,
-	.tf_read		= scc_tf_read,
-	.exec_command		= scc_exec_command,
-	.check_status		= scc_check_status,
-	.check_altstatus	= scc_check_altstatus,
-	.dev_select		= scc_dev_select,
+	.sff_tf_load		= scc_tf_load,
+	.sff_tf_read		= scc_tf_read,
+	.sff_exec_command	= scc_exec_command,
+	.sff_check_status	= scc_check_status,
+	.sff_check_altstatus	= scc_check_altstatus,
+	.sff_dev_select		= scc_dev_select,
 
 	.bmdma_setup		= scc_bmdma_setup,
 	.bmdma_start		= scc_bmdma_start,
 	.bmdma_stop		= scc_bmdma_stop,
 	.bmdma_status		= scc_bmdma_status,
-	.data_xfer		= scc_data_xfer,
+	.sff_data_xfer		= scc_data_xfer,
 
 	.freeze			= scc_freeze,
 	.prereset		= scc_pata_prereset,
@@ -986,8 +986,8 @@ static struct ata_port_operations scc_pata_ops = {
 	.postreset		= scc_postreset,
 	.post_internal_cmd	= scc_bmdma_stop,
 
-	.irq_clear		= scc_irq_clear,
-	.irq_on			= scc_irq_on,
+	.sff_irq_clear		= scc_irq_clear,
+	.sff_irq_on		= scc_irq_on,
 
 	.port_start		= scc_port_start,
 	.port_stop		= scc_port_stop,
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 4b85f84fbe76..d4840748fb5c 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -336,7 +336,7 @@ static struct ata_port_operations via_port_ops = {
 
 static struct ata_port_operations via_port_ops_noirq = {
 	.inherits	= &via_port_ops,
-	.data_xfer	= ata_sff_data_xfer_noirq,
+	.sff_data_xfer	= ata_sff_data_xfer_noirq,
 };
 
 /**
diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c
index cc18231e9334..6e52a3573fbf 100644
--- a/drivers/ata/pata_winbond.c
+++ b/drivers/ata/pata_winbond.c
@@ -127,7 +127,7 @@ static struct scsi_host_template winbond_sht = {
 
 static struct ata_port_operations winbond_port_ops = {
 	.inherits	= &ata_sff_port_ops,
-	.data_xfer	= winbond_data_xfer,
+	.sff_data_xfer	= winbond_data_xfer,
 	.cable_detect	= ata_cable_40wire,
 	.set_piomode	= winbond_set_piomode,
 };
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 676302fdaa97..37482d4e883f 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -1190,10 +1190,10 @@ static struct scsi_host_template sata_fsl_sht = {
 static const struct ata_port_operations sata_fsl_ops = {
 	.inherits = &sata_port_ops,
 
-	.check_status = sata_fsl_check_status,
-	.check_altstatus = sata_fsl_check_status,
+	.sff_check_status = sata_fsl_check_status,
+	.sff_check_altstatus = sata_fsl_check_status,
 
-	.tf_read = sata_fsl_tf_read,
+	.sff_tf_read = sata_fsl_tf_read,
 
 	.qc_prep = sata_fsl_qc_prep,
 	.qc_issue = sata_fsl_qc_issue,
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index 6e6fca4c20b6..0b5a736a45e3 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -222,7 +222,7 @@ static void inic_bmdma_setup(struct ata_queued_cmd *qc)
 	writeb(pp->cached_prdctl, port_base + PORT_PRD_CTL);
 
 	/* issue r/w command */
-	ap->ops->exec_command(ap, &qc->tf);
+	ap->ops->sff_exec_command(ap, &qc->tf);
 }
 
 static void inic_bmdma_start(struct ata_queued_cmd *qc)
@@ -267,14 +267,14 @@ static void inic_host_intr(struct ata_port *ap)
 			ata_qc_from_tag(ap, ap->link.active_tag);
 
 		if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) {
-			ap->ops->check_status(ap); /* clear ATA interrupt */
+			ap->ops->sff_check_status(ap); /* clear ATA interrupt */
 			return;
 		}
 
 		if (likely(ata_sff_host_intr(ap, qc)))
 			return;
 
-		ap->ops->check_status(ap); /* clear ATA interrupt */
+		ap->ops->sff_check_status(ap); /* clear ATA interrupt */
 		ata_port_printk(ap, KERN_WARNING, "unhandled "
 				"interrupt, irq_stat=%x\n", irq_stat);
 		return;
@@ -351,7 +351,7 @@ static unsigned int inic_qc_issue(struct ata_queued_cmd *qc)
 	 */
 	if (unlikely(qc->tf.command == ATA_CMD_ID_ATA ||
 		     qc->tf.command == ATA_CMD_ID_ATAPI)) {
-		u8 stat = ap->ops->check_status(ap);
+		u8 stat = ap->ops->sff_check_status(ap);
 		if (stat == 0x7f || stat == 0xff)
 			return AC_ERR_HSM;
 	}
@@ -365,7 +365,7 @@ static void inic_freeze(struct ata_port *ap)
 
 	__inic_set_pirq_mask(ap, PIRQ_MASK_FREEZE);
 
-	ap->ops->check_status(ap);
+	ap->ops->sff_check_status(ap);
 	writeb(0xff, port_base + PORT_IRQ_STAT);
 
 	readb(port_base + PORT_IRQ_STAT); /* flush */
@@ -375,7 +375,7 @@ static void inic_thaw(struct ata_port *ap)
 {
 	void __iomem *port_base = inic_port_base(ap);
 
-	ap->ops->check_status(ap);
+	ap->ops->sff_check_status(ap);
 	writeb(0xff, port_base + PORT_IRQ_STAT);
 
 	__inic_set_pirq_mask(ap, PIRQ_MASK_OTHER);
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 63cc43765f04..109b07495721 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -429,11 +429,11 @@ static struct ata_port_operations nv_adma_ops = {
 	.inherits		= &nv_generic_ops,
 
 	.check_atapi_dma	= nv_adma_check_atapi_dma,
-	.tf_read		= nv_adma_tf_read,
+	.sff_tf_read		= nv_adma_tf_read,
 	.qc_defer		= ata_std_qc_defer,
 	.qc_prep		= nv_adma_qc_prep,
 	.qc_issue		= nv_adma_qc_issue,
-	.irq_clear		= nv_adma_irq_clear,
+	.sff_irq_clear		= nv_adma_irq_clear,
 
 	.freeze			= nv_adma_freeze,
 	.thaw			= nv_adma_thaw,
@@ -1440,7 +1440,7 @@ static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance)
 			else
 				// No request pending?  Clear interrupt status
 				// anyway, in case there's one pending.
-				ap->ops->check_status(ap);
+				ap->ops->sff_check_status(ap);
 		}
 
 	}
@@ -1739,7 +1739,7 @@ static void nv_swncq_ncq_stop(struct ata_port *ap)
 		pp->dhfis_bits, pp->dmafis_bits, pp->sdbfis_bits);
 
 	ata_port_printk(ap, KERN_ERR, "ATA_REG 0x%X ERR_REG 0x%X\n",
-			ap->ops->check_status(ap),
+			ap->ops->sff_check_status(ap),
 			ioread8(ap->ioaddr.error_addr));
 
 	sactive = readl(pp->sactive_block);
@@ -1765,7 +1765,7 @@ static void nv_swncq_ncq_stop(struct ata_port *ap)
 	}
 
 	nv_swncq_pp_reinit(ap);
-	ap->ops->irq_clear(ap);
+	ap->ops->sff_irq_clear(ap);
 	__ata_bmdma_stop(ap);
 	nv_swncq_irq_clear(ap, 0xffff);
 }
@@ -1987,8 +1987,8 @@ static unsigned int nv_swncq_issue_atacmd(struct ata_port *ap,
 	pp->dmafis_bits &= ~(1 << qc->tag);
 	pp->qc_active |= (0x1 << qc->tag);
 
-	ap->ops->tf_load(ap, &qc->tf);	 /* load tf registers */
-	ap->ops->exec_command(ap, &qc->tf);
+	ap->ops->sff_tf_load(ap, &qc->tf);	 /* load tf registers */
+	ap->ops->sff_exec_command(ap, &qc->tf);
 
 	DPRINTK("Issued tag %u\n", qc->tag);
 
@@ -2060,7 +2060,7 @@ static int nv_swncq_sdbfis(struct ata_port *ap)
 		return -EINVAL;
 	}
 
-	ap->ops->irq_clear(ap);
+	ap->ops->sff_irq_clear(ap);
 	__ata_bmdma_stop(ap);
 
 	sactive = readl(pp->sactive_block);
@@ -2182,7 +2182,7 @@ static void nv_swncq_host_interrupt(struct ata_port *ap, u16 fis)
 	u8 ata_stat;
 	int rc = 0;
 
-	ata_stat = ap->ops->check_status(ap);
+	ata_stat = ap->ops->sff_check_status(ap);
 	nv_swncq_irq_clear(ap, fis);
 	if (!fis)
 		return;
@@ -2245,7 +2245,7 @@ static void nv_swncq_host_interrupt(struct ata_port *ap, u16 fis)
 
 		if (!(fis & NV_SWNCQ_IRQ_DMASETUP) &&
 		    !(pp->ncq_flags & ncq_saw_dmas)) {
-			ata_stat = ap->ops->check_status(ap);
+			ata_stat = ap->ops->sff_check_status(ap);
 			if (ata_stat & ATA_BUSY)
 				goto irq_exit;
 
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index 9923e860eae3..5a10dc5048ad 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -162,12 +162,12 @@ static struct scsi_host_template pdc_ata_sht = {
 static const struct ata_port_operations pdc_common_ops = {
 	.inherits		= &ata_sff_port_ops,
 
-	.tf_load		= pdc_tf_load_mmio,
-	.exec_command		= pdc_exec_command_mmio,
+	.sff_tf_load		= pdc_tf_load_mmio,
+	.sff_exec_command	= pdc_exec_command_mmio,
 	.check_atapi_dma	= pdc_check_atapi_dma,
 	.qc_prep		= pdc_qc_prep,
 	.qc_issue		= pdc_qc_issue,
-	.irq_clear		= pdc_irq_clear,
+	.sff_irq_clear		= pdc_irq_clear,
 
 	.post_internal_cmd	= pdc_post_internal_cmd,
 	.error_handler		= pdc_error_handler,
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 987313b68f3b..88bf4212590f 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -369,7 +369,7 @@ static void sil_host_intr(struct ata_port *ap, u32 bmdma2)
 
 	if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) {
 		/* this sometimes happens, just clear IRQ */
-		ap->ops->check_status(ap);
+		ap->ops->sff_check_status(ap);
 		return;
 	}
 
@@ -405,7 +405,7 @@ static void sil_host_intr(struct ata_port *ap, u32 bmdma2)
 	}
 
 	/* check main status, clearing INTRQ */
-	status = ap->ops->check_status(ap);
+	status = ap->ops->sff_check_status(ap);
 	if (unlikely(status & ATA_BUSY))
 		goto err_hsm;
 
@@ -480,7 +480,7 @@ static void sil_thaw(struct ata_port *ap)
 	u32 tmp;
 
 	/* clear IRQ */
-	ap->ops->check_status(ap);
+	ap->ops->sff_check_status(ap);
 	ata_sff_irq_clear(ap);
 
 	/* turn on SATA IRQ if supported */
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 67df1d753305..b83851f6e068 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -401,9 +401,9 @@ static struct scsi_host_template sil24_sht = {
 static struct ata_port_operations sil24_ops = {
 	.inherits		= &sata_pmp_port_ops,
 
-	.check_status		= sil24_check_status,
-	.check_altstatus	= sil24_check_status,
-	.tf_read		= sil24_tf_read,
+	.sff_check_status	= sil24_check_status,
+	.sff_check_altstatus	= sil24_check_status,
+	.sff_tf_read		= sil24_tf_read,
 	.qc_defer		= sil24_qc_defer,
 	.qc_prep		= sil24_qc_prep,
 	.qc_issue		= sil24_qc_issue,
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index 7b941106f7de..16aa6839aa5a 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -233,7 +233,7 @@ static void k2_bmdma_setup_mmio(struct ata_queued_cmd *qc)
 
 	/* issue r/w command if this is not a ATA DMA command*/
 	if (qc->tf.protocol != ATA_PROT_DMA)
-		ap->ops->exec_command(ap, &qc->tf);
+		ap->ops->sff_exec_command(ap, &qc->tf);
 }
 
 /**
@@ -269,7 +269,7 @@ static void k2_bmdma_start_mmio(struct ata_queued_cmd *qc)
 	   and the start command. */
 	/* issue r/w command if the access is to ATA*/
 	if (qc->tf.protocol == ATA_PROT_DMA)
-		ap->ops->exec_command(ap, &qc->tf);
+		ap->ops->sff_exec_command(ap, &qc->tf);
 }
 
 
@@ -336,9 +336,9 @@ static struct scsi_host_template k2_sata_sht = {
 
 static struct ata_port_operations k2_sata_ops = {
 	.inherits		= &ata_bmdma_port_ops,
-	.tf_load		= k2_sata_tf_load,
-	.tf_read		= k2_sata_tf_read,
-	.check_status		= k2_stat_check_status,
+	.sff_tf_load		= k2_sata_tf_load,
+	.sff_tf_read		= k2_sata_tf_read,
+	.sff_check_status	= k2_stat_check_status,
 	.check_atapi_dma	= k2_sata_check_atapi_dma,
 	.bmdma_setup		= k2_bmdma_setup_mmio,
 	.bmdma_start		= k2_bmdma_start_mmio,
diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index 40be2ff60902..6107eff731f3 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -243,18 +243,18 @@ static struct scsi_host_template pdc_sata_sht = {
 
 /* TODO: inherit from base port_ops after converting to new EH */
 static struct ata_port_operations pdc_20621_ops = {
-	.tf_load		= pdc_tf_load_mmio,
-	.tf_read		= ata_sff_tf_read,
-	.check_status		= ata_sff_check_status,
-	.exec_command		= pdc_exec_command_mmio,
-	.dev_select		= ata_sff_dev_select,
+	.sff_tf_load		= pdc_tf_load_mmio,
+	.sff_tf_read		= ata_sff_tf_read,
+	.sff_check_status	= ata_sff_check_status,
+	.sff_exec_command	= pdc_exec_command_mmio,
+	.sff_dev_select		= ata_sff_dev_select,
 	.phy_reset		= pdc_20621_phy_reset,
 	.qc_prep		= pdc20621_qc_prep,
 	.qc_issue		= pdc20621_qc_issue,
-	.data_xfer		= ata_sff_data_xfer,
+	.sff_data_xfer		= ata_sff_data_xfer,
 	.eng_timeout		= pdc_eng_timeout,
-	.irq_clear		= pdc20621_irq_clear,
-	.irq_on			= ata_sff_irq_on,
+	.sff_irq_clear		= pdc20621_irq_clear,
+	.sff_irq_on		= ata_sff_irq_on,
 	.port_start		= pdc_port_start,
 };
 
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 9323bc2a2785..e5df37689740 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -173,7 +173,7 @@ static void svia_noop_freeze(struct ata_port *ap)
 	/* Some VIA controllers choke if ATA_NIEN is manipulated in
 	 * certain way.  Leave it alone and just clear pending IRQ.
 	 */
-	ap->ops->check_status(ap);
+	ap->ops->sff_check_status(ap);
 	ata_sff_irq_clear(ap);
 }
 
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index 2c3c7693c750..f3d635c0a2e9 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -251,7 +251,7 @@ static void vsc_port_intr(u8 port_status, struct ata_port *ap)
 	 * simply clear the interrupt
 	 */
 	if (unlikely(!handled))
-		ap->ops->check_status(ap);
+		ap->ops->sff_check_status(ap);
 }
 
 /*
@@ -306,8 +306,8 @@ static struct scsi_host_template vsc_sata_sht = {
 
 static struct ata_port_operations vsc_sata_ops = {
 	.inherits		= &ata_bmdma_port_ops,
-	.tf_load		= vsc_sata_tf_load,
-	.tf_read		= vsc_sata_tf_read,
+	.sff_tf_load		= vsc_sata_tf_load,
+	.sff_tf_read		= vsc_sata_tf_read,
 	.freeze			= vsc_freeze,
 	.thaw			= vsc_thaw,
 	.scr_read		= vsc_sata_scr_read,
-- 
cgit v1.2.2


From 288623a06c652239d2f57d271af12bb024cf7218 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Mon, 7 Apr 2008 22:47:17 +0900
Subject: libata: clean up port_ops->sff_irq_clear()

->sff_irq_clear() is called only from SFF interrupt handler, so there
is no reason to initialize it for non-SFF controllers.  Also,
ata_sff_irq_clear() can handle both BMDMA and non-BMDMA SFF
controllers.

This patch kills ata_noop_irq_clear() and removes it from base
port_ops and sets ->sff_irq_clear to ata_sff_irq_clear() in sff
port_ops instead of bmdma port_ops.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/libata-core.c | 10 ----------
 drivers/ata/libata-sff.c  |  2 +-
 2 files changed, 1 insertion(+), 11 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index a01e02c5ce7a..fd912ccb90f8 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -74,7 +74,6 @@ const unsigned long sata_deb_timing_hotplug[]		= {  25,  500, 2000 };
 const unsigned long sata_deb_timing_long[]		= { 100, 2000, 5000 };
 
 const struct ata_port_operations ata_base_port_ops = {
-	.sff_irq_clear		= ata_noop_irq_clear,
 	.prereset		= ata_sff_prereset,
 	.hardreset		= sata_sff_hardreset,
 	.postreset		= ata_sff_postreset,
@@ -386,14 +385,6 @@ int atapi_cmd_type(u8 opcode)
 	}
 }
 
-/**
- *	ata_noop_irq_clear - Noop placeholder for irq_clear
- *	@ap: Port associated with this ATA transaction.
- */
-void ata_noop_irq_clear(struct ata_port *ap)
-{
-}
-
 /**
  *	ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure
  *	@tf: Taskfile to convert
@@ -6108,7 +6099,6 @@ EXPORT_SYMBOL_GPL(ata_port_start);
 EXPORT_SYMBOL_GPL(ata_do_set_mode);
 EXPORT_SYMBOL_GPL(ata_std_qc_defer);
 EXPORT_SYMBOL_GPL(ata_noop_qc_prep);
-EXPORT_SYMBOL_GPL(ata_noop_irq_clear);
 EXPORT_SYMBOL_GPL(ata_port_probe);
 EXPORT_SYMBOL_GPL(ata_dev_disable);
 EXPORT_SYMBOL_GPL(sata_set_spd);
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 04024a556660..c11601617134 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -58,6 +58,7 @@ const struct ata_port_operations ata_sff_port_ops = {
 	.sff_exec_command	= ata_sff_exec_command,
 	.sff_data_xfer		= ata_sff_data_xfer,
 	.sff_irq_on		= ata_sff_irq_on,
+	.sff_irq_clear		= ata_sff_irq_clear,
 
 	.port_start		= ata_sff_port_start,
 };
@@ -71,7 +72,6 @@ const struct ata_port_operations ata_bmdma_port_ops = {
 	.bmdma_start		= ata_bmdma_start,
 	.bmdma_stop		= ata_bmdma_stop,
 	.bmdma_status		= ata_bmdma_status,
-	.sff_irq_clear		= ata_sff_irq_clear,
 };
 
 /**
-- 
cgit v1.2.2


From 0aa1113d544226bc2c4a20d6ac1d71170512a361 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Mon, 7 Apr 2008 22:47:18 +0900
Subject: libata: separate out ata_std_prereset() from ata_sff_prereset()

Separate out generic ATA portion from ata_sff_prereset() into
ata_std_prereset() and implement ata_sff_prereset() using the std
version.  Waiting for device readiness is the only SFF specific part.

ata_base_port_ops now has ata_std_prereset() for its prereset and
ata_sff_port_ops overrides it to ata_sff_prereset().  This change can
affect pdc_adma, ahci, sata_fsl and sata_sil24.  pdc_adma implements
its own prereset using ata_sff_prereset() and the rest has hardreset
and thus are unaffected by this change.

This change reflects real world situation.  There is no generic way to
wait for device readiness for non-SFF controllers and some of them
don't have any mechanism for that.  Non-sff drivers which don't have
hardreset should wrap ata_std_prereset() and wait for device readiness
itself but there's no such driver now and isn't likely to be popular
in the future either.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/libata-core.c | 17 ++++-------------
 drivers/ata/libata-sff.c  | 43 +++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 47 insertions(+), 13 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index fd912ccb90f8..5f771bb44332 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -74,7 +74,7 @@ const unsigned long sata_deb_timing_hotplug[]		= {  25,  500, 2000 };
 const unsigned long sata_deb_timing_long[]		= { 100, 2000, 5000 };
 
 const struct ata_port_operations ata_base_port_ops = {
-	.prereset		= ata_sff_prereset,
+	.prereset		= ata_std_prereset,
 	.hardreset		= sata_sff_hardreset,
 	.postreset		= ata_sff_postreset,
 	.error_handler		= ata_std_error_handler,
@@ -3416,7 +3416,7 @@ int sata_link_resume(struct ata_link *link, const unsigned long *params,
 }
 
 /**
- *	ata_sff_prereset - prepare for reset
+ *	ata_std_prereset - prepare for reset
  *	@link: ATA link to be reset
  *	@deadline: deadline jiffies for the operation
  *
@@ -3432,7 +3432,7 @@ int sata_link_resume(struct ata_link *link, const unsigned long *params,
  *	RETURNS:
  *	0 on success, -errno otherwise.
  */
-int ata_sff_prereset(struct ata_link *link, unsigned long deadline)
+int ata_std_prereset(struct ata_link *link, unsigned long deadline)
 {
 	struct ata_port *ap = link->ap;
 	struct ata_eh_context *ehc = &link->eh_context;
@@ -3452,16 +3452,6 @@ int ata_sff_prereset(struct ata_link *link, unsigned long deadline)
 					"link for reset (errno=%d)\n", rc);
 	}
 
-	/* wait for !BSY if we don't know that no device is attached */
-	if (!ata_link_offline(link)) {
-		rc = ata_sff_wait_ready(ap, deadline);
-		if (rc && rc != -ENODEV) {
-			ata_link_printk(link, KERN_WARNING, "device not ready "
-					"(errno=%d), forcing hardreset\n", rc);
-			ehc->i.action |= ATA_EH_HARDRESET;
-		}
-	}
-
 	return 0;
 }
 
@@ -6104,6 +6094,7 @@ EXPORT_SYMBOL_GPL(ata_dev_disable);
 EXPORT_SYMBOL_GPL(sata_set_spd);
 EXPORT_SYMBOL_GPL(sata_link_debounce);
 EXPORT_SYMBOL_GPL(sata_link_resume);
+EXPORT_SYMBOL_GPL(ata_std_prereset);
 EXPORT_SYMBOL_GPL(sata_link_hardreset);
 EXPORT_SYMBOL_GPL(ata_dev_classify);
 EXPORT_SYMBOL_GPL(ata_dev_pair);
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index c11601617134..9234bc047956 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -47,6 +47,7 @@ const struct ata_port_operations ata_sff_port_ops = {
 
 	.freeze			= ata_sff_freeze,
 	.thaw			= ata_sff_thaw,
+	.prereset		= ata_sff_prereset,
 	.softreset		= ata_sff_softreset,
 	.error_handler		= ata_sff_error_handler,
 	.post_internal_cmd	= ata_sff_post_internal_cmd,
@@ -1606,6 +1607,48 @@ void ata_sff_thaw(struct ata_port *ap)
 	ap->ops->sff_irq_on(ap);
 }
 
+/**
+ *	ata_sff_prereset - prepare SFF link for reset
+ *	@link: SFF link to be reset
+ *	@deadline: deadline jiffies for the operation
+ *
+ *	SFF link @link is about to be reset.  Initialize it.  It first
+ *	calls ata_std_prereset() and wait for !BSY if the port is
+ *	being softreset.
+ *
+ *	LOCKING:
+ *	Kernel thread context (may sleep)
+ *
+ *	RETURNS:
+ *	0 on success, -errno otherwise.
+ */
+int ata_sff_prereset(struct ata_link *link, unsigned long deadline)
+{
+	struct ata_port *ap = link->ap;
+	struct ata_eh_context *ehc = &link->eh_context;
+	int rc;
+
+	rc = ata_std_prereset(link, deadline);
+	if (rc)
+		return rc;
+
+	/* if we're about to do hardreset, nothing more to do */
+	if (ehc->i.action & ATA_EH_HARDRESET)
+		return 0;
+
+	/* wait for !BSY if we don't know that no device is attached */
+	if (!ata_link_offline(link)) {
+		rc = ata_sff_wait_ready(ap, deadline);
+		if (rc && rc != -ENODEV) {
+			ata_link_printk(link, KERN_WARNING, "device not ready "
+					"(errno=%d), forcing hardreset\n", rc);
+			ehc->i.action |= ATA_EH_HARDRESET;
+		}
+	}
+
+	return 0;
+}
+
 /**
  *	ata_devchk - PATA device presence detection
  *	@ap: ATA channel to examine
-- 
cgit v1.2.2


From 203c75b8245c5386044721d9c5eda5c6b71b3d14 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Mon, 7 Apr 2008 22:47:18 +0900
Subject: libata: separate out ata_std_postreset() from ata_sff_postreset()

Separate out generic ATA portion from ata_sff_postreset() into
ata_std_postreset() and implement ata_sff_postreset() using the std
version.

ata_base_port_ops now has ata_std_postreset() for its postreset and
ata_sff_port_ops overrides it to ata_sff_postreset().

This change affects pdc_adma, ahci, sata_fsl and sata_sil24.  pdc_adma
now specifies postreset to ata_sff_postreset() explicitly.  sata_fsl
and sata_sil24 now use ata_std_postreset() which makes no difference
to them.  ahci now calls ata_std_postreset() from its own postreset
method, which causes no behavior difference.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/ahci.c        |  2 +-
 drivers/ata/libata-core.c | 24 ++++--------------------
 drivers/ata/libata-sff.c  | 36 ++++++++++++++++++++++++++++++++++++
 3 files changed, 41 insertions(+), 21 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index c5e4501daa74..939dc1d4e50d 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1444,7 +1444,7 @@ static void ahci_postreset(struct ata_link *link, unsigned int *class)
 	void __iomem *port_mmio = ahci_port_base(ap);
 	u32 new_tmp, tmp;
 
-	ata_sff_postreset(link, class);
+	ata_std_postreset(link, class);
 
 	/* Make sure port's ATAPI bit is set appropriately */
 	new_tmp = tmp = readl(port_mmio + PORT_CMD);
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 5f771bb44332..eaead76c9443 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -76,7 +76,7 @@ const unsigned long sata_deb_timing_long[]		= { 100, 2000, 5000 };
 const struct ata_port_operations ata_base_port_ops = {
 	.prereset		= ata_std_prereset,
 	.hardreset		= sata_sff_hardreset,
-	.postreset		= ata_sff_postreset,
+	.postreset		= ata_std_postreset,
 	.error_handler		= ata_std_error_handler,
 };
 
@@ -3516,7 +3516,7 @@ int sata_link_hardreset(struct ata_link *link, const unsigned long *timing,
 }
 
 /**
- *	ata_sff_postreset - standard postreset callback
+ *	ata_std_postreset - standard postreset callback
  *	@link: the target ata_link
  *	@classes: classes of attached devices
  *
@@ -3527,9 +3527,8 @@ int sata_link_hardreset(struct ata_link *link, const unsigned long *timing,
  *	LOCKING:
  *	Kernel thread context (may sleep)
  */
-void ata_sff_postreset(struct ata_link *link, unsigned int *classes)
+void ata_std_postreset(struct ata_link *link, unsigned int *classes)
 {
-	struct ata_port *ap = link->ap;
 	u32 serror;
 
 	DPRINTK("ENTER\n");
@@ -3542,22 +3541,6 @@ void ata_sff_postreset(struct ata_link *link, unsigned int *classes)
 		sata_scr_write(link, SCR_ERROR, serror);
 	link->eh_info.serror = 0;
 
-	/* is double-select really necessary? */
-	if (classes[0] != ATA_DEV_NONE)
-		ap->ops->sff_dev_select(ap, 1);
-	if (classes[1] != ATA_DEV_NONE)
-		ap->ops->sff_dev_select(ap, 0);
-
-	/* bail out if no device is present */
-	if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) {
-		DPRINTK("EXIT, no device\n");
-		return;
-	}
-
-	/* set up device control */
-	if (ap->ioaddr.ctl_addr)
-		iowrite8(ap->ctl, ap->ioaddr.ctl_addr);
-
 	DPRINTK("EXIT\n");
 }
 
@@ -6096,6 +6079,7 @@ EXPORT_SYMBOL_GPL(sata_link_debounce);
 EXPORT_SYMBOL_GPL(sata_link_resume);
 EXPORT_SYMBOL_GPL(ata_std_prereset);
 EXPORT_SYMBOL_GPL(sata_link_hardreset);
+EXPORT_SYMBOL_GPL(ata_std_postreset);
 EXPORT_SYMBOL_GPL(ata_dev_classify);
 EXPORT_SYMBOL_GPL(ata_dev_pair);
 EXPORT_SYMBOL_GPL(ata_port_disable);
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 9234bc047956..e530baccc9cb 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -49,6 +49,7 @@ const struct ata_port_operations ata_sff_port_ops = {
 	.thaw			= ata_sff_thaw,
 	.prereset		= ata_sff_prereset,
 	.softreset		= ata_sff_softreset,
+	.postreset		= ata_sff_postreset,
 	.error_handler		= ata_sff_error_handler,
 	.post_internal_cmd	= ata_sff_post_internal_cmd,
 
@@ -2031,6 +2032,41 @@ int sata_sff_hardreset(struct ata_link *link, unsigned int *class,
 	return 0;
 }
 
+/**
+ *	ata_sff_postreset - SFF postreset callback
+ *	@link: the target SFF ata_link
+ *	@classes: classes of attached devices
+ *
+ *	This function is invoked after a successful reset.  It first
+ *	calls ata_std_postreset() and performs SFF specific postreset
+ *	processing.
+ *
+ *	LOCKING:
+ *	Kernel thread context (may sleep)
+ */
+void ata_sff_postreset(struct ata_link *link, unsigned int *classes)
+{
+	struct ata_port *ap = link->ap;
+
+	ata_std_postreset(link, classes);
+
+	/* is double-select really necessary? */
+	if (classes[0] != ATA_DEV_NONE)
+		ap->ops->sff_dev_select(ap, 1);
+	if (classes[1] != ATA_DEV_NONE)
+		ap->ops->sff_dev_select(ap, 0);
+
+	/* bail out if no device is present */
+	if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) {
+		DPRINTK("EXIT, no device\n");
+		return;
+	}
+
+	/* set up device control */
+	if (ap->ioaddr.ctl_addr)
+		iowrite8(ap->ctl, ap->ioaddr.ctl_addr);
+}
+
 /**
  *	ata_sff_error_handler - Stock error handler for BMDMA controller
  *	@ap: port to handle error for
-- 
cgit v1.2.2


From 705e76beb90b97421e1f61e857c4246799781bb5 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Mon, 7 Apr 2008 22:47:19 +0900
Subject: libata: restructure SFF post-reset readiness waits

Previously, post-softreset readiness is waited as follows.

1. ata_sff_wait_after_reset() waits for 150ms and then for
   ATA_TMOUT_FF_WAIT if status is 0xff and other conditions meet.

2. ata_bus_softreset() finishes with -ENODEV if status is still 0xff.
   If not, continue to #3.

3. ata_bus_post_reset() waits readiness of dev0 and/or dev1 depending
   on devmask using ata_sff_wait_ready().

And for post-hardreset readiness,

1. ata_sff_wait_after_reset() waits for 150ms and then for
   ATA_TMOUT_FF_WAIT if status is 0xff and other conditions meet.

2. sata_sff_hardreset waits for device readiness using
   ata_sff_wait_ready().

This patch merges and unifies post-reset readiness waits into
ata_sff_wait_ready() and ata_sff_wait_after_reset().

ATA_TMOUT_FF_WAIT handling is merged into ata_sff_wait_ready().  If TF
status is 0xff, link status is unknown and the port is SATA, it will
continue polling till ATA_TMOUT_FF_WAIT.

ata_sff_wait_after_reset() is updated to perform the following steps.

1. waits for 150ms.

2. waits for dev0 readiness using ata_sff_wait_ready().  Note that
   this is done regardless of devmask, as ata_sff_wait_ready() handles
   0xff status correctly, this preserves the original behavior except
   that it may wait longer after softreset if link is online but
   status is 0xff.  This behavior change is very unlikely to cause any
   actual difference and is intended.  It brings softreset behavior to
   that of hardreset.

3. waits for dev1 readiness just the same way ata_bus_post_reset() did.

Now both soft and hard resets call ata_sff_wait_after_reset() after
reset to wait for readiness after resets.  As
ata_sff_wait_after_reset() contains calls to ->sff_dev_select(),
explicit call near the end of sata_sff_hardreset() is removed.

This change makes reset implementation simpler and more consistent.

While at it, make the magical 150ms wait post-reset wait duration a
constant and ata_sff_wait_ready() and ata_sff_wait_after_reset() take
@link instead of @ap.  This is to make them consistent with other
reset helpers and ease core changes.

pata_scc is updated accordingly.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/ahci.c          |  11 +--
 drivers/ata/libata-sff.c    | 161 ++++++++++++++++++--------------------------
 drivers/ata/pata_scc.c      |  91 ++++++++++++++-----------
 drivers/ata/sata_inic162x.c |   6 +-
 drivers/ata/sata_via.c      |   2 +-
 5 files changed, 124 insertions(+), 147 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 939dc1d4e50d..45a67a9ad8ab 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1302,10 +1302,8 @@ static int ahci_do_softreset(struct ata_link *link, unsigned int *class,
 	tf.ctl &= ~ATA_SRST;
 	ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0);
 
-	/* wait a while before checking status */
-	ata_sff_wait_after_reset(ap, deadline);
-
-	rc = ata_sff_wait_ready(ap, deadline);
+	/* wait for link to become ready */
+	rc = ata_sff_wait_after_reset(link, 1, deadline);
 	/* link occupied, -ENODEV too is an error */
 	if (rc) {
 		reason = "device not ready";
@@ -1415,9 +1413,6 @@ static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
 	if (rc || ata_link_offline(link))
 		return rc;
 
-	/* spec mandates ">= 2ms" before checking status */
-	msleep(150);
-
 	/* The pseudo configuration device on SIMG4726 attached to
 	 * ASUS P5W-DH Deluxe doesn't send signature FIS after
 	 * hardreset if no device is attached to the first downstream
@@ -1431,7 +1426,7 @@ static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
 	 * have to be reset again.  For most cases, this should
 	 * suffice while making probing snappish enough.
 	 */
-	rc = ata_sff_wait_ready(ap, jiffies + 2 * HZ);
+	rc = ata_sff_wait_after_reset(link, 1, jiffies + 2 * HZ);
 	if (rc)
 		ahci_kick_engine(ap, 0);
 
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index e530baccc9cb..6e8de3c1595e 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -310,7 +310,7 @@ int ata_sff_busy_sleep(struct ata_port *ap,
 
 /**
  *	ata_sff_wait_ready - sleep until BSY clears, or timeout
- *	@ap: port containing status register to be polled
+ *	@link: SFF link to wait ready status for
  *	@deadline: deadline jiffies for the operation
  *
  *	Sleep until ATA Status register bit BSY clears, or timeout
@@ -322,26 +322,52 @@ int ata_sff_busy_sleep(struct ata_port *ap,
  *	RETURNS:
  *	0 on success, -errno otherwise.
  */
-int ata_sff_wait_ready(struct ata_port *ap, unsigned long deadline)
+int ata_sff_wait_ready(struct ata_link *link, unsigned long deadline)
 {
+	struct ata_port *ap = link->ap;
 	unsigned long start = jiffies;
+	unsigned long nodev_deadline = start + ATA_TMOUT_FF_WAIT;
 	int warned = 0;
 
+	if (time_after(nodev_deadline, deadline))
+		nodev_deadline = deadline;
+
 	while (1) {
 		u8 status = ap->ops->sff_check_status(ap);
 		unsigned long now = jiffies;
 
 		if (!(status & ATA_BUSY))
 			return 0;
-		if (!ata_link_online(&ap->link) && status == 0xff)
-			return -ENODEV;
+
+		/* No device status could be transient.  Ignore it if
+		 * link is online.  Also, some SATA devices take a
+		 * long time to clear 0xff after reset.  For example,
+		 * HHD424020F7SV00 iVDR needs >= 800ms while Quantum
+		 * GoVault needs even more than that.  Wait for
+		 * ATA_TMOUT_FF_WAIT on -ENODEV if link isn't offline.
+		 *
+		 * Note that some PATA controllers (pata_ali) explode
+		 * if status register is read more than once when
+		 * there's no device attached.
+		 */
+		if (status == 0xff) {
+			if (ata_link_online(link))
+				status = ATA_BUSY;
+			else if ((link->ap->flags & ATA_FLAG_SATA) &&
+				 !ata_link_offline(link) &&
+				 time_before(now, nodev_deadline))
+				status = ATA_BUSY;
+			if (status == 0xff)
+				return -ENODEV;
+		}
+
 		if (time_after(now, deadline))
 			return -EBUSY;
 
 		if (!warned && time_after(now, start + 5 * HZ) &&
 		    (deadline - now > 3 * HZ)) {
-			ata_port_printk(ap, KERN_WARNING,
-				"port is slow to respond, please be patient "
+			ata_link_printk(link, KERN_WARNING,
+				"link is slow to respond, please be patient "
 				"(Status 0x%x)\n", status);
 			warned = 1;
 		}
@@ -1625,7 +1651,6 @@ void ata_sff_thaw(struct ata_port *ap)
  */
 int ata_sff_prereset(struct ata_link *link, unsigned long deadline)
 {
-	struct ata_port *ap = link->ap;
 	struct ata_eh_context *ehc = &link->eh_context;
 	int rc;
 
@@ -1639,7 +1664,7 @@ int ata_sff_prereset(struct ata_link *link, unsigned long deadline)
 
 	/* wait for !BSY if we don't know that no device is attached */
 	if (!ata_link_offline(link)) {
-		rc = ata_sff_wait_ready(ap, deadline);
+		rc = ata_sff_wait_ready(link, deadline);
 		if (rc && rc != -ENODEV) {
 			ata_link_printk(link, KERN_WARNING, "device not ready "
 					"(errno=%d), forcing hardreset\n", rc);
@@ -1762,25 +1787,41 @@ unsigned int ata_sff_dev_classify(struct ata_device *dev, int present,
 	return class;
 }
 
-static int ata_bus_post_reset(struct ata_port *ap, unsigned int devmask,
-			      unsigned long deadline)
+/**
+ *	ata_sff_wait_after_reset - wait for devices to become ready after reset
+ *	@link: SFF link which is just reset
+ *	@devmask: mask of present devices
+ *	@deadline: deadline jiffies for the operation
+ *
+ *	Wait devices attached to SFF @link to become ready after
+ *	reset.  It contains preceding 150ms wait to avoid accessing TF
+ *	status register too early.
+ *
+ *	LOCKING:
+ *	Kernel thread context (may sleep).
+ *
+ *	RETURNS:
+ *	0 on success, -ENODEV if some or all of devices in @devmask
+ *	don't seem to exist.  -errno on other errors.
+ */
+int ata_sff_wait_after_reset(struct ata_link *link, unsigned int devmask,
+			     unsigned long deadline)
 {
+	struct ata_port *ap = link->ap;
 	struct ata_ioports *ioaddr = &ap->ioaddr;
 	unsigned int dev0 = devmask & (1 << 0);
 	unsigned int dev1 = devmask & (1 << 1);
 	int rc, ret = 0;
 
-	/* if device 0 was found in ata_devchk, wait for its
-	 * BSY bit to clear
+	msleep(ATA_WAIT_AFTER_RESET_MSECS);
+
+	/* always check readiness of the master device */
+	rc = ata_sff_wait_ready(link, deadline);
+	/* -ENODEV means the odd clown forgot the D7 pulldown resistor
+	 * and TF status is 0xff, bail out on it too.
 	 */
-	if (dev0) {
-		rc = ata_sff_wait_ready(ap, deadline);
-		if (rc) {
-			if (rc != -ENODEV)
-				return rc;
-			ret = rc;
-		}
-	}
+	if (rc)
+		return rc;
 
 	/* if device 1 was found in ata_devchk, wait for register
 	 * access briefly, then wait for BSY to clear.
@@ -1804,7 +1845,7 @@ static int ata_bus_post_reset(struct ata_port *ap, unsigned int devmask,
 			msleep(50);	/* give drive a breather */
 		}
 
-		rc = ata_sff_wait_ready(ap, deadline);
+		rc = ata_sff_wait_ready(link, deadline);
 		if (rc) {
 			if (rc != -ENODEV)
 				return rc;
@@ -1822,61 +1863,6 @@ static int ata_bus_post_reset(struct ata_port *ap, unsigned int devmask,
 	return ret;
 }
 
-/**
- *	ata_sff_wait_after_reset - wait before checking status after reset
- *	@ap: port containing status register to be polled
- *	@deadline: deadline jiffies for the operation
- *
- *	After reset, we need to pause a while before reading status.
- *	Also, certain combination of controller and device report 0xff
- *	for some duration (e.g. until SATA PHY is up and running)
- *	which is interpreted as empty port in ATA world.  This
- *	function also waits for such devices to get out of 0xff
- *	status.
- *
- *	LOCKING:
- *	Kernel thread context (may sleep).
- */
-void ata_sff_wait_after_reset(struct ata_port *ap, unsigned long deadline)
-{
-	unsigned long until = jiffies + ATA_TMOUT_FF_WAIT;
-
-	if (time_before(until, deadline))
-		deadline = until;
-
-	/* Spec mandates ">= 2ms" before checking status.  We wait
-	 * 150ms, because that was the magic delay used for ATAPI
-	 * devices in Hale Landis's ATADRVR, for the period of time
-	 * between when the ATA command register is written, and then
-	 * status is checked.  Because waiting for "a while" before
-	 * checking status is fine, post SRST, we perform this magic
-	 * delay here as well.
-	 *
-	 * Old drivers/ide uses the 2mS rule and then waits for ready.
-	 */
-	msleep(150);
-
-	/* Wait for 0xff to clear.  Some SATA devices take a long time
-	 * to clear 0xff after reset.  For example, HHD424020F7SV00
-	 * iVDR needs >= 800ms while.  Quantum GoVault needs even more
-	 * than that.
-	 *
-	 * Note that some PATA controllers (pata_ali) explode if
-	 * status register is read more than once when there's no
-	 * device attached.
-	 */
-	if (ap->flags & ATA_FLAG_SATA) {
-		while (1) {
-			u8 status = ap->ops->sff_check_status(ap);
-
-			if (status != 0xff || time_after(jiffies, deadline))
-				return;
-
-			msleep(50);
-		}
-	}
-}
-
 static int ata_bus_softreset(struct ata_port *ap, unsigned int devmask,
 			     unsigned long deadline)
 {
@@ -1891,17 +1877,8 @@ static int ata_bus_softreset(struct ata_port *ap, unsigned int devmask,
 	udelay(20);	/* FIXME: flush */
 	iowrite8(ap->ctl, ioaddr->ctl_addr);
 
-	/* wait a while before checking status */
-	ata_sff_wait_after_reset(ap, deadline);
-
-	/* Before we perform post reset processing we want to see if
-	 * the bus shows 0xFF because the odd clown forgets the D7
-	 * pulldown resistor.
-	 */
-	if (ap->ops->sff_check_status(ap) == 0xFF)
-		return -ENODEV;
-
-	return ata_bus_post_reset(ap, devmask, deadline);
+	/* wait the port to become ready */
+	return ata_sff_wait_after_reset(&ap->link, devmask, deadline);
 }
 
 /**
@@ -2003,20 +1980,18 @@ int sata_sff_hardreset(struct ata_link *link, unsigned int *class,
 		return 0;
 	}
 
-	/* wait a while before checking status */
-	ata_sff_wait_after_reset(ap, deadline);
-
 	/* If PMP is supported, we have to do follow-up SRST.  Note
 	 * that some PMPs don't send D2H Reg FIS after hardreset at
 	 * all if the first port is empty.  Wait for it just for a
 	 * second and request follow-up SRST.
 	 */
 	if (ap->flags & ATA_FLAG_PMP) {
-		ata_sff_wait_ready(ap, jiffies + HZ);
+		ata_sff_wait_after_reset(link, 1, jiffies + HZ);
 		return -EAGAIN;
 	}
 
-	rc = ata_sff_wait_ready(ap, deadline);
+	/* wait for the link to become online */
+	rc = ata_sff_wait_after_reset(link, 1, deadline);
 	/* link occupied, -ENODEV too is an error */
 	if (rc) {
 		ata_link_printk(link, KERN_ERR,
@@ -2024,8 +1999,6 @@ int sata_sff_hardreset(struct ata_link *link, unsigned int *class,
 		return rc;
 	}
 
-	ap->ops->sff_dev_select(ap, 0);	/* probably unnecessary */
-
 	*class = ata_sff_dev_classify(link->device, 1, NULL);
 
 	DPRINTK("EXIT, class=%u\n", *class);
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index 2b9da715c704..accc275e74cc 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -497,47 +497,68 @@ static unsigned int scc_devchk (struct ata_port *ap,
 }
 
 /**
- *	scc_bus_post_reset - PATA device post reset
+ *	scc_wait_after_reset - wait for devices to become ready after reset
  *
- *	Note: Original code is ata_bus_post_reset().
+ *	Note: Original code is ata_sff_wait_after_reset
  */
 
-static int scc_bus_post_reset(struct ata_port *ap, unsigned int devmask,
-                              unsigned long deadline)
+int scc_wait_after_reset(struct ata_link *link, unsigned int devmask,
+			 unsigned long deadline)
 {
+	struct ata_port *ap = link->ap;
 	struct ata_ioports *ioaddr = &ap->ioaddr;
 	unsigned int dev0 = devmask & (1 << 0);
 	unsigned int dev1 = devmask & (1 << 1);
-	int rc;
+	int rc, ret = 0;
+
+	/* Spec mandates ">= 2ms" before checking status.  We wait
+	 * 150ms, because that was the magic delay used for ATAPI
+	 * devices in Hale Landis's ATADRVR, for the period of time
+	 * between when the ATA command register is written, and then
+	 * status is checked.  Because waiting for "a while" before
+	 * checking status is fine, post SRST, we perform this magic
+	 * delay here as well.
+	 *
+	 * Old drivers/ide uses the 2mS rule and then waits for ready.
+	 */
+	msleep(150);
 
-	/* if device 0 was found in ata_devchk, wait for its
-	 * BSY bit to clear
+	/* always check readiness of the master device */
+	rc = ata_sff_wait_ready(link, deadline);
+	/* -ENODEV means the odd clown forgot the D7 pulldown resistor
+	 * and TF status is 0xff, bail out on it too.
 	 */
-	if (dev0) {
-		rc = ata_sff_wait_ready(ap, deadline);
-		if (rc && rc != -ENODEV)
-			return rc;
-	}
+	if (rc)
+		return rc;
 
-	/* if device 1 was found in ata_devchk, wait for
-	 * register access, then wait for BSY to clear
+	/* if device 1 was found in ata_devchk, wait for register
+	 * access briefly, then wait for BSY to clear.
 	 */
-	while (dev1) {
-		u8 nsect, lbal;
+	if (dev1) {
+		int i;
 
 		ap->ops->sff_dev_select(ap, 1);
-		nsect = in_be32(ioaddr->nsect_addr);
-		lbal = in_be32(ioaddr->lbal_addr);
-		if ((nsect == 1) && (lbal == 1))
-			break;
-		if (time_after(jiffies, deadline))
-			return -EBUSY;
-		msleep(50);	/* give drive a breather */
-	}
-	if (dev1) {
-		rc = ata_sff_wait_ready(ap, deadline);
-		if (rc && rc != -ENODEV)
-			return rc;
+
+		/* Wait for register access.  Some ATAPI devices fail
+		 * to set nsect/lbal after reset, so don't waste too
+		 * much time on it.  We're gonna wait for !BSY anyway.
+		 */
+		for (i = 0; i < 2; i++) {
+			u8 nsect, lbal;
+
+			nsect = in_be32(ioaddr->nsect_addr);
+			lbal = in_be32(ioaddr->lbal_addr);
+			if ((nsect == 1) && (lbal == 1))
+				break;
+			msleep(50);	/* give drive a breather */
+		}
+
+		rc = ata_sff_wait_ready(link, deadline);
+		if (rc) {
+			if (rc != -ENODEV)
+				return rc;
+			ret = rc;
+		}
 	}
 
 	/* is all this really necessary? */
@@ -547,7 +568,7 @@ static int scc_bus_post_reset(struct ata_port *ap, unsigned int devmask,
 	if (dev0)
 		ap->ops->sff_dev_select(ap, 0);
 
-	return 0;
+	return ret;
 }
 
 /**
@@ -570,17 +591,7 @@ static unsigned int scc_bus_softreset(struct ata_port *ap, unsigned int devmask,
 	udelay(20);
 	out_be32(ioaddr->ctl_addr, ap->ctl);
 
-	/* wait a while before checking status */
-	ata_sff_wait_after_reset(ap, deadline);
-
-	/* Before we perform post reset processing we want to see if
-	 * the bus shows 0xFF because the odd clown forgets the D7
-	 * pulldown resistor.
-	 */
-	if (scc_check_status(ap) == 0xFF)
-		return 0;
-
-	scc_bus_post_reset(ap, devmask, deadline);
+	scc_wait_after_reset(&ap->link, devmask, deadlien);
 
 	return 0;
 }
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index 0b5a736a45e3..9f47d0022453 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -417,10 +417,8 @@ static int inic_hardreset(struct ata_link *link, unsigned int *class,
 	if (ata_link_online(link)) {
 		struct ata_taskfile tf;
 
-		/* wait a while before checking status */
-		ata_sff_wait_after_reset(ap, deadline);
-
-		rc = ata_sff_wait_ready(ap, deadline);
+		/* wait for link to become ready */
+		rc = ata_sff_wait_after_reset(link, 1, deadline);
 		/* link occupied, -ENODEV too is an error */
 		if (rc) {
 			ata_link_printk(link, KERN_WARNING, "device not ready "
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index e5df37689740..96deeb354e16 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -242,7 +242,7 @@ static int vt6420_prereset(struct ata_link *link, unsigned long deadline)
 
  skip_scr:
 	/* wait for !BSY */
-	ata_sff_wait_ready(ap, deadline);
+	ata_sff_wait_ready(link, deadline);
 
 	return 0;
 }
-- 
cgit v1.2.2


From aa2731ad9ad80ac3fca48bd1c4cf0eceede4810e Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Mon, 7 Apr 2008 22:47:19 +0900
Subject: libata: separate out ata_wait_ready() and implement
 ata_wait_after_reset()

Factor out waiting logic (which is common to all ATA controllers) from
ata_sff_wait_ready() into ata_wait_ready().  ata_wait_ready() takes
@check_ready function pointer and uses it to poll for readiness.  This
allows non-SFF controllers to use ata_wait_ready() to wait for link
readiness.

This patch also implements ata_wait_after_reset() - generic version of
ata_sff_wait_after_reset() - using ata_wait_ready().

ata_sff_wait_ready() is reimplemented using ata_wait_ready() and
ata_sff_check_ready().  Functionality remains the same.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/libata-core.c | 98 +++++++++++++++++++++++++++++++++++++++++++++++
 drivers/ata/libata-sff.c  | 62 ++++++------------------------
 drivers/ata/libata.h      |  2 +
 3 files changed, 112 insertions(+), 50 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index eaead76c9443..3bad6f189190 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3310,6 +3310,103 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
 	return rc;
 }
 
+/**
+ *	ata_wait_ready - wait for link to become ready
+ *	@link: link to be waited on
+ *	@deadline: deadline jiffies for the operation
+ *	@check_ready: callback to check link readiness
+ *
+ *	Wait for @link to become ready.  @check_ready should return
+ *	positive number if @link is ready, 0 if it isn't, -ENODEV if
+ *	link doesn't seem to be occupied, other errno for other error
+ *	conditions.
+ *
+ *	Transient -ENODEV conditions are allowed for
+ *	ATA_TMOUT_FF_WAIT.
+ *
+ *	LOCKING:
+ *	EH context.
+ *
+ *	RETURNS:
+ *	0 if @linke is ready before @deadline; otherwise, -errno.
+ */
+int ata_wait_ready(struct ata_link *link, unsigned long deadline,
+		   int (*check_ready)(struct ata_link *link))
+{
+	unsigned long start = jiffies;
+	unsigned long nodev_deadline = start + ATA_TMOUT_FF_WAIT;
+	int warned = 0;
+
+	if (time_after(nodev_deadline, deadline))
+		nodev_deadline = deadline;
+
+	while (1) {
+		unsigned long now = jiffies;
+		int ready, tmp;
+
+		ready = tmp = check_ready(link);
+		if (ready > 0)
+			return 0;
+
+		/* -ENODEV could be transient.  Ignore -ENODEV if link
+		 * is online.  Also, some SATA devices take a long
+		 * time to clear 0xff after reset.  For example,
+		 * HHD424020F7SV00 iVDR needs >= 800ms while Quantum
+		 * GoVault needs even more than that.  Wait for
+		 * ATA_TMOUT_FF_WAIT on -ENODEV if link isn't offline.
+		 *
+		 * Note that some PATA controllers (pata_ali) explode
+		 * if status register is read more than once when
+		 * there's no device attached.
+		 */
+		if (ready == -ENODEV) {
+			if (ata_link_online(link))
+				ready = 0;
+			else if ((link->ap->flags & ATA_FLAG_SATA) &&
+				 !ata_link_offline(link) &&
+				 time_before(now, nodev_deadline))
+				ready = 0;
+		}
+
+		if (ready)
+			return ready;
+		if (time_after(now, deadline))
+			return -EBUSY;
+
+		if (!warned && time_after(now, start + 5 * HZ) &&
+		    (deadline - now > 3 * HZ)) {
+			ata_link_printk(link, KERN_WARNING,
+				"link is slow to respond, please be patient "
+				"(ready=%d)\n", tmp);
+			warned = 1;
+		}
+
+		msleep(50);
+	}
+}
+
+/**
+ *	ata_wait_after_reset - wait for link to become ready after reset
+ *	@link: link to be waited on
+ *	@deadline: deadline jiffies for the operation
+ *	@check_ready: callback to check link readiness
+ *
+ *	Wait for @link to become ready after reset.
+ *
+ *	LOCKING:
+ *	EH context.
+ *
+ *	RETURNS:
+ *	0 if @linke is ready before @deadline; otherwise, -errno.
+ */
+extern int ata_wait_after_reset(struct ata_link *link, unsigned long deadline,
+				int (*check_ready)(struct ata_link *link))
+{
+	msleep(ATA_WAIT_AFTER_RESET_MSECS);
+
+	return ata_wait_ready(link, deadline, check_ready);
+}
+
 /**
  *	sata_link_debounce - debounce SATA phy status
  *	@link: ATA link to debounce SATA phy status for
@@ -6075,6 +6172,7 @@ EXPORT_SYMBOL_GPL(ata_noop_qc_prep);
 EXPORT_SYMBOL_GPL(ata_port_probe);
 EXPORT_SYMBOL_GPL(ata_dev_disable);
 EXPORT_SYMBOL_GPL(sata_set_spd);
+EXPORT_SYMBOL_GPL(ata_wait_after_reset);
 EXPORT_SYMBOL_GPL(sata_link_debounce);
 EXPORT_SYMBOL_GPL(sata_link_resume);
 EXPORT_SYMBOL_GPL(ata_std_prereset);
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 6e8de3c1595e..78912c5011ad 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -308,6 +308,17 @@ int ata_sff_busy_sleep(struct ata_port *ap,
 	return 0;
 }
 
+static int ata_sff_check_ready(struct ata_link *link)
+{
+	u8 status = link->ap->ops->sff_check_status(link->ap);
+
+	if (!(status & ATA_BUSY))
+		return 1;
+	if (status == 0xff)
+		return -ENODEV;
+	return 0;
+}
+
 /**
  *	ata_sff_wait_ready - sleep until BSY clears, or timeout
  *	@link: SFF link to wait ready status for
@@ -324,56 +335,7 @@ int ata_sff_busy_sleep(struct ata_port *ap,
  */
 int ata_sff_wait_ready(struct ata_link *link, unsigned long deadline)
 {
-	struct ata_port *ap = link->ap;
-	unsigned long start = jiffies;
-	unsigned long nodev_deadline = start + ATA_TMOUT_FF_WAIT;
-	int warned = 0;
-
-	if (time_after(nodev_deadline, deadline))
-		nodev_deadline = deadline;
-
-	while (1) {
-		u8 status = ap->ops->sff_check_status(ap);
-		unsigned long now = jiffies;
-
-		if (!(status & ATA_BUSY))
-			return 0;
-
-		/* No device status could be transient.  Ignore it if
-		 * link is online.  Also, some SATA devices take a
-		 * long time to clear 0xff after reset.  For example,
-		 * HHD424020F7SV00 iVDR needs >= 800ms while Quantum
-		 * GoVault needs even more than that.  Wait for
-		 * ATA_TMOUT_FF_WAIT on -ENODEV if link isn't offline.
-		 *
-		 * Note that some PATA controllers (pata_ali) explode
-		 * if status register is read more than once when
-		 * there's no device attached.
-		 */
-		if (status == 0xff) {
-			if (ata_link_online(link))
-				status = ATA_BUSY;
-			else if ((link->ap->flags & ATA_FLAG_SATA) &&
-				 !ata_link_offline(link) &&
-				 time_before(now, nodev_deadline))
-				status = ATA_BUSY;
-			if (status == 0xff)
-				return -ENODEV;
-		}
-
-		if (time_after(now, deadline))
-			return -EBUSY;
-
-		if (!warned && time_after(now, start + 5 * HZ) &&
-		    (deadline - now > 3 * HZ)) {
-			ata_link_printk(link, KERN_WARNING,
-				"link is slow to respond, please be patient "
-				"(Status 0x%x)\n", status);
-			warned = 1;
-		}
-
-		msleep(50);
-	}
+	return ata_wait_ready(link, deadline, ata_sff_check_ready);
 }
 
 /**
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 11b5f67a19d4..08af43e2c081 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -81,6 +81,8 @@ extern unsigned ata_exec_internal_sg(struct ata_device *dev,
 				     int dma_dir, struct scatterlist *sg,
 				     unsigned int n_elem, unsigned long timeout);
 extern unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd);
+extern int ata_wait_ready(struct ata_link *link, unsigned long deadline,
+			  int (*check_ready)(struct ata_link *link));
 extern int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
 			   unsigned int flags, u16 *id);
 extern int ata_dev_reread_id(struct ata_device *dev, unsigned int readid_flags);
-- 
cgit v1.2.2


From a89611e8489ac24f371c9fd6fef6605b170b16ba Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Mon, 7 Apr 2008 22:47:19 +0900
Subject: ahci: use ata_wait_after_reset() instead of ata_sff_wait_ready()

Implement ahci_check_ready() and replace ata_sff_wait_after_reset()
with ata_wait_after_reset().  As ahci was faking TF access, this
change doesn't result in any functional difference.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/ahci.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 45a67a9ad8ab..7e251a2cbda5 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1256,6 +1256,16 @@ static int ahci_exec_polled_cmd(struct ata_port *ap, int pmp,
 	return 0;
 }
 
+static int ahci_check_ready(struct ata_link *link)
+{
+	void __iomem *mmio = link->ap->ioaddr.cmd_addr;
+	u8 status = readl(mmio + PORT_TFDATA) & 0xFF;
+
+	if (!(status & ATA_BUSY))
+		return 1;
+	return 0;
+}
+
 static int ahci_do_softreset(struct ata_link *link, unsigned int *class,
 			     int pmp, unsigned long deadline)
 {
@@ -1303,7 +1313,7 @@ static int ahci_do_softreset(struct ata_link *link, unsigned int *class,
 	ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0);
 
 	/* wait for link to become ready */
-	rc = ata_sff_wait_after_reset(link, 1, deadline);
+	rc = ata_wait_after_reset(link, deadline, ahci_check_ready);
 	/* link occupied, -ENODEV too is an error */
 	if (rc) {
 		reason = "device not ready";
@@ -1426,7 +1436,7 @@ static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
 	 * have to be reset again.  For most cases, this should
 	 * suffice while making probing snappish enough.
 	 */
-	rc = ata_sff_wait_after_reset(link, 1, jiffies + 2 * HZ);
+	rc = ata_wait_after_reset(link, jiffies + 2 * HZ, ahci_check_ready);
 	if (rc)
 		ahci_kick_engine(ap, 0);
 
-- 
cgit v1.2.2


From 9dadd45b24145d6aee2fabb28d7aef972301892b Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Mon, 7 Apr 2008 22:47:19 +0900
Subject: libata: move generic hardreset code from sata_sff_hardreset() to
 sata_link_hardreset()

sata_sff_hardreset() contains link readiness wait logic which isn't
SFF specific.  Move that part into sata_link_hardreset(), which now
takes two more parameters - @online and @check_ready.  Both are
optional.  The former is out parameter for link onlineness after
reset.  The latter is used to wait for link readiness after hardreset.

Users of sata_link_hardreset() is updated to use new funtionality and
ahci_hardreset() is updated to use sata_link_hardreset() instead of
sata_sff_hardreset().  This doesn't really cause any behavior change.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/ahci.c        | 35 +++++++++++++++++++--------------
 drivers/ata/ata_piix.c    |  2 +-
 drivers/ata/libata-core.c | 50 ++++++++++++++++++++++++++++++++++++++++++++++-
 drivers/ata/libata-pmp.c  |  7 ++++---
 drivers/ata/libata-sff.c  | 49 +++++++++-------------------------------------
 5 files changed, 83 insertions(+), 60 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 7e251a2cbda5..0f553aaa6f79 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1343,10 +1343,12 @@ static int ahci_softreset(struct ata_link *link, unsigned int *class,
 static int ahci_hardreset(struct ata_link *link, unsigned int *class,
 			  unsigned long deadline)
 {
+	const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
 	struct ata_port *ap = link->ap;
 	struct ahci_port_priv *pp = ap->private_data;
 	u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
 	struct ata_taskfile tf;
+	bool online;
 	int rc;
 
 	DPRINTK("ENTER\n");
@@ -1358,14 +1360,14 @@ static int ahci_hardreset(struct ata_link *link, unsigned int *class,
 	tf.command = 0x80;
 	ata_tf_to_fis(&tf, 0, 0, d2h_fis);
 
-	rc = sata_sff_hardreset(link, class, deadline);
+	rc = sata_link_hardreset(link, timing, deadline, &online,
+				 ahci_check_ready);
 
 	ahci_start_engine(ap);
 
-	if (rc == 0 && ata_link_online(link))
+	*class = ATA_DEV_NONE;
+	if (online)
 		*class = ahci_dev_classify(ap);
-	if (rc != -EAGAIN && *class == ATA_DEV_UNKNOWN)
-		*class = ATA_DEV_NONE;
 
 	DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
 	return rc;
@@ -1376,6 +1378,7 @@ static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
 {
 	struct ata_port *ap = link->ap;
 	u32 serror;
+	bool online;
 	int rc;
 
 	DPRINTK("ENTER\n");
@@ -1383,7 +1386,7 @@ static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
 	ahci_stop_engine(ap);
 
 	rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
-				 deadline);
+				 deadline, &online, NULL);
 
 	/* vt8251 needs SError cleared for the port to operate */
 	ahci_scr_read(ap, SCR_ERROR, &serror);
@@ -1396,7 +1399,8 @@ static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
 	/* vt8251 doesn't clear BSY on signature FIS reception,
 	 * request follow-up softreset.
 	 */
-	return rc ?: -EAGAIN;
+	*class = ATA_DEV_NONE;
+	return online ? -EAGAIN : rc;
 }
 
 static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
@@ -1406,6 +1410,7 @@ static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
 	struct ahci_port_priv *pp = ap->private_data;
 	u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
 	struct ata_taskfile tf;
+	bool online;
 	int rc;
 
 	ahci_stop_engine(ap);
@@ -1416,13 +1421,10 @@ static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
 	ata_tf_to_fis(&tf, 0, 0, d2h_fis);
 
 	rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
-				 deadline);
+				 deadline, &online, NULL);
 
 	ahci_start_engine(ap);
 
-	if (rc || ata_link_offline(link))
-		return rc;
-
 	/* The pseudo configuration device on SIMG4726 attached to
 	 * ASUS P5W-DH Deluxe doesn't send signature FIS after
 	 * hardreset if no device is attached to the first downstream
@@ -1436,11 +1438,14 @@ static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
 	 * have to be reset again.  For most cases, this should
 	 * suffice while making probing snappish enough.
 	 */
-	rc = ata_wait_after_reset(link, jiffies + 2 * HZ, ahci_check_ready);
-	if (rc)
-		ahci_kick_engine(ap, 0);
-
-	return 0;
+	if (online) {
+		rc = ata_wait_after_reset(link, jiffies + 2 * HZ,
+					  ahci_check_ready);
+		if (rc)
+			ahci_kick_engine(ap, 0);
+	}
+	*class = ATA_DEV_NONE;
+	return rc;
 }
 
 static void ahci_postreset(struct ata_link *link, unsigned int *class)
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 7ab76a413cdf..f59a55bfade4 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -1022,7 +1022,7 @@ static int piix_sidpr_hardreset(struct ata_link *link, unsigned int *class,
 	int rc;
 
 	/* do hardreset */
-	rc = sata_link_hardreset(link, timing, deadline);
+	rc = sata_link_hardreset(link, timing, deadline, NULL, NULL);
 	if (rc) {
 		ata_link_printk(link, KERN_ERR,
 				"COMRESET failed (errno=%d)\n", rc);
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 3bad6f189190..b607292b6480 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3557,8 +3557,18 @@ int ata_std_prereset(struct ata_link *link, unsigned long deadline)
  *	@link: link to reset
  *	@timing: timing parameters { interval, duratinon, timeout } in msec
  *	@deadline: deadline jiffies for the operation
+ *	@online: optional out parameter indicating link onlineness
+ *	@check_ready: optional callback to check link readiness
  *
  *	SATA phy-reset @link using DET bits of SControl register.
+ *	After hardreset, link readiness is waited upon using
+ *	ata_wait_ready() if @check_ready is specified.  LLDs are
+ *	allowed to not specify @check_ready and wait itself after this
+ *	function returns.  Device classification is LLD's
+ *	responsibility.
+ *
+ *	*@online is set to one iff reset succeeded and @link is online
+ *	after reset.
  *
  *	LOCKING:
  *	Kernel thread context (may sleep)
@@ -3567,13 +3577,17 @@ int ata_std_prereset(struct ata_link *link, unsigned long deadline)
  *	0 on success, -errno otherwise.
  */
 int sata_link_hardreset(struct ata_link *link, const unsigned long *timing,
-			unsigned long deadline)
+			unsigned long deadline,
+			bool *online, int (*check_ready)(struct ata_link *))
 {
 	u32 scontrol;
 	int rc;
 
 	DPRINTK("ENTER\n");
 
+	if (online)
+		*online = false;
+
 	if (sata_set_spd_needed(link)) {
 		/* SATA spec says nothing about how to reconfigure
 		 * spd.  To be on the safe side, turn off phy during
@@ -3607,7 +3621,41 @@ int sata_link_hardreset(struct ata_link *link, const unsigned long *timing,
 
 	/* bring link back */
 	rc = sata_link_resume(link, timing, deadline);
+	if (rc)
+		goto out;
+	/* if link is offline nothing more to do */
+	if (ata_link_offline(link))
+		goto out;
+
+	/* Link is online.  From this point, -ENODEV too is an error. */
+	if (online)
+		*online = true;
+
+	if ((link->ap->flags & ATA_FLAG_PMP) && ata_is_host_link(link)) {
+		/* If PMP is supported, we have to do follow-up SRST.
+		 * Some PMPs don't send D2H Reg FIS after hardreset if
+		 * the first port is empty.  Wait only for
+		 * ATA_TMOUT_PMP_SRST_WAIT.
+		 */
+		if (check_ready) {
+			unsigned long pmp_deadline;
+
+			pmp_deadline = jiffies + ATA_TMOUT_PMP_SRST_WAIT;
+			if (time_after(pmp_deadline, deadline))
+				pmp_deadline = deadline;
+			ata_wait_ready(link, pmp_deadline, check_ready);
+		}
+		rc = -EAGAIN;
+		goto out;
+	}
+
+	rc = 0;
+	if (check_ready)
+		rc = ata_wait_ready(link, deadline, check_ready);
  out:
+	if (rc && rc != -EAGAIN)
+		ata_link_printk(link, KERN_ERR,
+				"COMRESET failed (errno=%d)\n", rc);
 	DPRINTK("EXIT, rc=%d\n", rc);
 	return rc;
 }
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index a7cb1498c9b2..7f1a87f01ab2 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -239,13 +239,14 @@ int sata_pmp_std_hardreset(struct ata_link *link, unsigned int *class,
 			   unsigned long deadline)
 {
 	const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
+	bool online;
 	u32 tmp;
 	int rc;
 
 	DPRINTK("ENTER\n");
 
 	/* do hardreset */
-	rc = sata_link_hardreset(link, timing, deadline);
+	rc = sata_link_hardreset(link, timing, deadline, &online, NULL);
 	if (rc) {
 		ata_link_printk(link, KERN_ERR,
 				"COMRESET failed (errno=%d)\n", rc);
@@ -261,7 +262,7 @@ int sata_pmp_std_hardreset(struct ata_link *link, unsigned int *class,
 	}
 
 	/* if device is present, follow up with srst to wait for !BSY */
-	if (ata_link_online(link))
+	if (online)
 		rc = -EAGAIN;
  out:
 	/* if SCR isn't accessible, we need to reset the PMP */
@@ -916,7 +917,7 @@ static int sata_pmp_eh_handle_disabled_links(struct ata_port *ap)
 		 * SError.N working.
 		 */
 		sata_link_hardreset(link, sata_deb_timing_normal,
-				    jiffies + ATA_TMOUT_INTERNAL_QUICK);
+				jiffies + ATA_TMOUT_INTERNAL_QUICK, NULL, NULL);
 
 		/* unconditionally clear SError.N */
 		rc = sata_scr_write(link, SCR_ERROR, SERR_PHYRDY_CHG);
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 78912c5011ad..0b97e84d3af6 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -1921,50 +1921,19 @@ int ata_sff_softreset(struct ata_link *link, unsigned int *classes,
 int sata_sff_hardreset(struct ata_link *link, unsigned int *class,
 		       unsigned long deadline)
 {
-	struct ata_port *ap = link->ap;
-	const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
+	struct ata_eh_context *ehc = &link->eh_context;
+	const unsigned long *timing = sata_ehc_deb_timing(ehc);
+	bool online;
 	int rc;
 
-	DPRINTK("ENTER\n");
-
-	/* do hardreset */
-	rc = sata_link_hardreset(link, timing, deadline);
-	if (rc) {
-		ata_link_printk(link, KERN_ERR,
-				"COMRESET failed (errno=%d)\n", rc);
-		return rc;
-	}
-
-	/* TODO: phy layer with polling, timeouts, etc. */
-	if (ata_link_offline(link)) {
-		*class = ATA_DEV_NONE;
-		DPRINTK("EXIT, link offline\n");
-		return 0;
-	}
-
-	/* If PMP is supported, we have to do follow-up SRST.  Note
-	 * that some PMPs don't send D2H Reg FIS after hardreset at
-	 * all if the first port is empty.  Wait for it just for a
-	 * second and request follow-up SRST.
-	 */
-	if (ap->flags & ATA_FLAG_PMP) {
-		ata_sff_wait_after_reset(link, 1, jiffies + HZ);
-		return -EAGAIN;
-	}
-
-	/* wait for the link to become online */
-	rc = ata_sff_wait_after_reset(link, 1, deadline);
-	/* link occupied, -ENODEV too is an error */
-	if (rc) {
-		ata_link_printk(link, KERN_ERR,
-				"COMRESET failed (errno=%d)\n", rc);
-		return rc;
-	}
-
-	*class = ata_sff_dev_classify(link->device, 1, NULL);
+	rc = sata_link_hardreset(link, timing, deadline, &online,
+				 ata_sff_check_ready);
+	*class = ATA_DEV_NONE;
+	if (online)
+		*class = ata_sff_dev_classify(link->device, 1, NULL);
 
 	DPRINTK("EXIT, class=%u\n", *class);
-	return 0;
+	return rc;
 }
 
 /**
-- 
cgit v1.2.2


From 57c9efdfb3cee5d4564fcb5f70555e2edb1bc52a Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Mon, 7 Apr 2008 22:47:19 +0900
Subject: libata: implement and use sata_std_hardreset()

Implement sata_std_hardreset(), which simply wraps around
sata_link_hardreset().  sata_std_hardreset() becomes new standard
hardreset method for sata_port_ops and sata_sff_hardreset() moves from
ata_base_port_ops to ata_sff_port_ops, which is where it really
belongs.

ata_is_builtin_hardreset() is added so that both
ata_std_error_handler() and ata_sff_error_handler() skip both builtin
hardresets if SCR isn't accessible.

piix_sidpr_hardreset() in ata_piix.c is identical to
sata_std_hardreset() in functionality and got replaced with the
standard function.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/ata_piix.c    | 27 +--------------------------
 drivers/ata/libata-core.c | 30 +++++++++++++++++++++++++++++-
 drivers/ata/libata-eh.c   |  7 ++-----
 drivers/ata/libata-sff.c  |  9 ++++-----
 drivers/ata/libata.h      |  9 +++++++++
 5 files changed, 45 insertions(+), 37 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index f59a55bfade4..b7c38eeb498f 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -165,8 +165,6 @@ static void piix_set_dmamode(struct ata_port *ap, struct ata_device *adev);
 static void ich_set_dmamode(struct ata_port *ap, struct ata_device *adev);
 static int ich_pata_cable_detect(struct ata_port *ap);
 static u8 piix_vmw_bmdma_status(struct ata_port *ap);
-static int piix_sidpr_hardreset(struct ata_link *link, unsigned int *class,
-				unsigned long deadline);
 static int piix_sidpr_scr_read(struct ata_port *ap, unsigned int reg, u32 *val);
 static int piix_sidpr_scr_write(struct ata_port *ap, unsigned int reg, u32 val);
 #ifdef CONFIG_PM
@@ -319,7 +317,7 @@ static struct ata_port_operations piix_sata_ops = {
 
 static struct ata_port_operations piix_sidpr_sata_ops = {
 	.inherits		= &piix_sata_ops,
-	.hardreset		= piix_sidpr_hardreset,
+	.hardreset		= sata_std_hardreset,
 	.scr_read		= piix_sidpr_scr_read,
 	.scr_write		= piix_sidpr_scr_write,
 };
@@ -1015,29 +1013,6 @@ static int piix_sidpr_scr_write(struct ata_port *ap, unsigned int reg, u32 val)
 	return 0;
 }
 
-static int piix_sidpr_hardreset(struct ata_link *link, unsigned int *class,
-				unsigned long deadline)
-{
-	const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
-	int rc;
-
-	/* do hardreset */
-	rc = sata_link_hardreset(link, timing, deadline, NULL, NULL);
-	if (rc) {
-		ata_link_printk(link, KERN_ERR,
-				"COMRESET failed (errno=%d)\n", rc);
-		return rc;
-	}
-
-	/* TODO: phy layer with polling, timeouts, etc. */
-	if (ata_link_offline(link)) {
-		*class = ATA_DEV_NONE;
-		return 0;
-	}
-
-	return -EAGAIN;
-}
-
 #ifdef CONFIG_PM
 static int piix_broken_suspend(void)
 {
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index b607292b6480..c4fd4afbf349 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -75,7 +75,6 @@ const unsigned long sata_deb_timing_long[]		= { 100, 2000, 5000 };
 
 const struct ata_port_operations ata_base_port_ops = {
 	.prereset		= ata_std_prereset,
-	.hardreset		= sata_sff_hardreset,
 	.postreset		= ata_std_postreset,
 	.error_handler		= ata_std_error_handler,
 };
@@ -84,6 +83,7 @@ const struct ata_port_operations sata_port_ops = {
 	.inherits		= &ata_base_port_ops,
 
 	.qc_defer		= ata_std_qc_defer,
+	.hardreset		= sata_std_hardreset,
 	.sff_dev_select		= ata_noop_dev_select,
 };
 
@@ -3660,6 +3660,33 @@ int sata_link_hardreset(struct ata_link *link, const unsigned long *timing,
 	return rc;
 }
 
+/**
+ *	sata_std_hardreset - COMRESET w/o waiting or classification
+ *	@link: link to reset
+ *	@class: resulting class of attached device
+ *	@deadline: deadline jiffies for the operation
+ *
+ *	Standard SATA COMRESET w/o waiting or classification.
+ *
+ *	LOCKING:
+ *	Kernel thread context (may sleep)
+ *
+ *	RETURNS:
+ *	0 if link offline, -EAGAIN if link online, -errno on errors.
+ */
+int sata_std_hardreset(struct ata_link *link, unsigned int *class,
+		       unsigned long deadline)
+{
+	const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
+	bool online;
+	int rc;
+
+	/* do hardreset */
+	rc = sata_link_hardreset(link, timing, deadline, &online, NULL);
+	*class = ATA_DEV_NONE;
+	return online ? -EAGAIN : rc;
+}
+
 /**
  *	ata_std_postreset - standard postreset callback
  *	@link: the target ata_link
@@ -6225,6 +6252,7 @@ EXPORT_SYMBOL_GPL(sata_link_debounce);
 EXPORT_SYMBOL_GPL(sata_link_resume);
 EXPORT_SYMBOL_GPL(ata_std_prereset);
 EXPORT_SYMBOL_GPL(sata_link_hardreset);
+EXPORT_SYMBOL_GPL(sata_std_hardreset);
 EXPORT_SYMBOL_GPL(ata_std_postreset);
 EXPORT_SYMBOL_GPL(ata_dev_classify);
 EXPORT_SYMBOL_GPL(ata_dev_pair);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index f4f9c2783821..21687bbd9a70 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2857,11 +2857,8 @@ void ata_std_error_handler(struct ata_port *ap)
 	struct ata_port_operations *ops = ap->ops;
 	ata_reset_fn_t hardreset = ops->hardreset;
 
-	/* sata_std_hardreset is inherited to all drivers from
-	 * ata_base_port_ops.  Ignore it if SCR access is not
-	 * available.
-	 */
-	if (hardreset == sata_sff_hardreset && !sata_scr_valid(&ap->link))
+	/* ignore built-in hardreset if SCR access is not available */
+	if (ata_is_builtin_hardreset(hardreset) && !sata_scr_valid(&ap->link))
 		hardreset = NULL;
 
 	ata_do_eh(ap, ops->prereset, ops->softreset, hardreset, ops->postreset);
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 0b97e84d3af6..f464ca1fa261 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -49,6 +49,7 @@ const struct ata_port_operations ata_sff_port_ops = {
 	.thaw			= ata_sff_thaw,
 	.prereset		= ata_sff_prereset,
 	.softreset		= ata_sff_softreset,
+	.hardreset		= sata_sff_hardreset,
 	.postreset		= ata_sff_postreset,
 	.error_handler		= ata_sff_error_handler,
 	.post_internal_cmd	= ata_sff_post_internal_cmd,
@@ -2031,14 +2032,12 @@ void ata_sff_error_handler(struct ata_port *ap)
 
 	/* PIO and DMA engines have been stopped, perform recovery */
 
-	/* ata_sff_softreset and sata_sff_hardreset are inherited to
-	 * all SFF drivers from ata_sff_port_ops.  Ignore softreset if
-	 * ctl isn't accessible.  Ignore hardreset if SCR access isn't
-	 * available.
+	/* Ignore ata_sff_softreset if ctl isn't accessible and
+	 * built-in hardresets if SCR access isn't available.
 	 */
 	if (softreset == ata_sff_softreset && !ap->ioaddr.ctl_addr)
 		softreset = NULL;
-	if (hardreset == sata_sff_hardreset && !sata_scr_valid(&ap->link))
+	if (ata_is_builtin_hardreset(hardreset) && !sata_scr_valid(&ap->link))
 		hardreset = NULL;
 
 	ata_do_eh(ap, ap->ops->prereset, softreset, hardreset,
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 08af43e2c081..87f54a1db3b0 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -38,6 +38,15 @@ struct ata_scsi_args {
 	void			(*done)(struct scsi_cmnd *);
 };
 
+static inline int ata_is_builtin_hardreset(ata_reset_fn_t reset)
+{
+	if (reset == sata_std_hardreset)
+		return 1;
+	if (reset == sata_sff_hardreset)
+		return 1;
+	return 0;
+}
+
 /* libata-core.c */
 enum {
 	/* flags for ata_dev_read_id() */
-- 
cgit v1.2.2


From ac371987a81c61c2efbd6931245cdcaf43baad89 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Mon, 7 Apr 2008 22:47:19 +0900
Subject: libata: clear SError after link resume

SError used to be cleared in ->postreset.  This has small hotplug race
condition.  If a device is plugged in after reset is complete but
postreset hasn't run yet, its hotplug event gets lost when SError is
cleared.  This patch makes sata_link_resume() clear SError.  This
kills the race condition and makes a lot of sense as some PMP and host
PHYs don't work properly without SError cleared.

This change makes sata_pmp_std_{pre|post}_reset()'s unnecessary as
they become identical to ata_std counterparts.  It also simplifies
sata_pmp_hardreset() and ahci_vt8251_hardreset().

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/ahci.c        |  5 ---
 drivers/ata/libata-core.c | 35 +++++++++++-------
 drivers/ata/libata-pmp.c  | 93 +----------------------------------------------
 3 files changed, 23 insertions(+), 110 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 0f553aaa6f79..a69bcca4eb1b 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1377,7 +1377,6 @@ static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
 				 unsigned long deadline)
 {
 	struct ata_port *ap = link->ap;
-	u32 serror;
 	bool online;
 	int rc;
 
@@ -1388,10 +1387,6 @@ static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
 	rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
 				 deadline, &online, NULL);
 
-	/* vt8251 needs SError cleared for the port to operate */
-	ahci_scr_read(ap, SCR_ERROR, &serror);
-	ahci_scr_write(ap, SCR_ERROR, serror);
-
 	ahci_start_engine(ap);
 
 	DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index c4fd4afbf349..e00b620f161a 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -90,9 +90,9 @@ const struct ata_port_operations sata_port_ops = {
 const struct ata_port_operations sata_pmp_port_ops = {
 	.inherits		= &sata_port_ops,
 
-	.pmp_prereset		= sata_pmp_std_prereset,
+	.pmp_prereset		= ata_std_prereset,
 	.pmp_hardreset		= sata_pmp_std_hardreset,
-	.pmp_postreset		= sata_pmp_std_postreset,
+	.pmp_postreset		= ata_std_postreset,
 	.error_handler		= sata_pmp_error_handler,
 };
 
@@ -3493,7 +3493,7 @@ int sata_link_debounce(struct ata_link *link, const unsigned long *params,
 int sata_link_resume(struct ata_link *link, const unsigned long *params,
 		     unsigned long deadline)
 {
-	u32 scontrol;
+	u32 scontrol, serror;
 	int rc;
 
 	if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
@@ -3509,7 +3509,25 @@ int sata_link_resume(struct ata_link *link, const unsigned long *params,
 	 */
 	msleep(200);
 
-	return sata_link_debounce(link, params, deadline);
+	if ((rc = sata_link_debounce(link, params, deadline)))
+		return rc;
+
+	/* Clear SError.  PMP and some host PHYs require this to
+	 * operate and clearing should be done before checking PHY
+	 * online status to avoid race condition (hotplugging between
+	 * link resume and status check).
+	 */
+	if (!(rc = sata_scr_read(link, SCR_ERROR, &serror)))
+		rc = sata_scr_write(link, SCR_ERROR, serror);
+	if (rc == 0 || rc == -EINVAL) {
+		unsigned long flags;
+
+		spin_lock_irqsave(link->ap->lock, flags);
+		link->eh_info.serror = 0;
+		spin_unlock_irqrestore(link->ap->lock, flags);
+		rc = 0;
+	}
+	return rc;
 }
 
 /**
@@ -3701,18 +3719,11 @@ int sata_std_hardreset(struct ata_link *link, unsigned int *class,
  */
 void ata_std_postreset(struct ata_link *link, unsigned int *classes)
 {
-	u32 serror;
-
 	DPRINTK("ENTER\n");
 
 	/* print link status */
 	sata_print_link_status(link);
 
-	/* clear SError */
-	if (sata_scr_read(link, SCR_ERROR, &serror) == 0)
-		sata_scr_write(link, SCR_ERROR, serror);
-	link->eh_info.serror = 0;
-
 	DPRINTK("EXIT\n");
 }
 
@@ -6296,9 +6307,7 @@ EXPORT_SYMBOL_GPL(ata_pci_device_resume);
 #endif /* CONFIG_PCI */
 
 EXPORT_SYMBOL_GPL(sata_pmp_qc_defer_cmd_switch);
-EXPORT_SYMBOL_GPL(sata_pmp_std_prereset);
 EXPORT_SYMBOL_GPL(sata_pmp_std_hardreset);
-EXPORT_SYMBOL_GPL(sata_pmp_std_postreset);
 EXPORT_SYMBOL_GPL(sata_pmp_error_handler);
 
 EXPORT_SYMBOL_GPL(__ata_ehi_push_desc);
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index 7f1a87f01ab2..2f8a9577c26d 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -175,49 +175,6 @@ int sata_pmp_scr_write(struct ata_link *link, int reg, u32 val)
 	return 0;
 }
 
-/**
- *	sata_pmp_std_prereset - prepare PMP link for reset
- *	@link: link to be reset
- *	@deadline: deadline jiffies for the operation
- *
- *	@link is about to be reset.  Initialize it.
- *
- *	LOCKING:
- *	Kernel thread context (may sleep)
- *
- *	RETURNS:
- *	0 on success, -errno otherwise.
- */
-int sata_pmp_std_prereset(struct ata_link *link, unsigned long deadline)
-{
-	struct ata_eh_context *ehc = &link->eh_context;
-	const unsigned long *timing = sata_ehc_deb_timing(ehc);
-	int rc;
-
-	/* if we're about to do hardreset, nothing more to do */
-	if (ehc->i.action & ATA_EH_HARDRESET)
-		return 0;
-
-	/* resume link */
-	rc = sata_link_resume(link, timing, deadline);
-	if (rc) {
-		/* phy resume failed */
-		ata_link_printk(link, KERN_WARNING, "failed to resume link "
-				"for reset (errno=%d)\n", rc);
-		return rc;
-	}
-
-	/* clear SError bits including .X which blocks the port when set */
-	rc = sata_scr_write(link, SCR_ERROR, 0xffffffff);
-	if (rc) {
-		ata_link_printk(link, KERN_ERR,
-				"failed to clear SError (errno=%d)\n", rc);
-		return rc;
-	}
-
-	return 0;
-}
-
 /**
  *	sata_pmp_std_hardreset - standard hardreset method for PMP link
  *	@link: link to be reset
@@ -238,33 +195,13 @@ int sata_pmp_std_prereset(struct ata_link *link, unsigned long deadline)
 int sata_pmp_std_hardreset(struct ata_link *link, unsigned int *class,
 			   unsigned long deadline)
 {
-	const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
-	bool online;
 	u32 tmp;
 	int rc;
 
 	DPRINTK("ENTER\n");
 
-	/* do hardreset */
-	rc = sata_link_hardreset(link, timing, deadline, &online, NULL);
-	if (rc) {
-		ata_link_printk(link, KERN_ERR,
-				"COMRESET failed (errno=%d)\n", rc);
-		goto out;
-	}
-
-	/* clear SError bits including .X which blocks the port when set */
-	rc = sata_scr_write(link, SCR_ERROR, 0xffffffff);
-	if (rc) {
-		ata_link_printk(link, KERN_ERR, "failed to clear SError "
-				"during hardreset (errno=%d)\n", rc);
-		goto out;
-	}
+	rc = sata_std_hardreset(link, class, deadline);
 
-	/* if device is present, follow up with srst to wait for !BSY */
-	if (online)
-		rc = -EAGAIN;
- out:
 	/* if SCR isn't accessible, we need to reset the PMP */
 	if (rc && rc != -EAGAIN && sata_scr_read(link, SCR_STATUS, &tmp))
 		rc = -ERESTART;
@@ -273,34 +210,6 @@ int sata_pmp_std_hardreset(struct ata_link *link, unsigned int *class,
 	return rc;
 }
 
-/**
- *	ata_std_postreset - standard postreset method for PMP link
- *	@link: the target ata_link
- *	@classes: classes of attached devices
- *
- *	This function is invoked after a successful reset.  Note that
- *	the device might have been reset more than once using
- *	different reset methods before postreset is invoked.
- *
- *	LOCKING:
- *	Kernel thread context (may sleep)
- */
-void sata_pmp_std_postreset(struct ata_link *link, unsigned int *class)
-{
-	u32 serror;
-
-	DPRINTK("ENTER\n");
-
-	/* clear SError */
-	if (sata_scr_read(link, SCR_ERROR, &serror) == 0)
-		sata_scr_write(link, SCR_ERROR, serror);
-
-	/* print link status */
-	sata_print_link_status(link);
-
-	DPRINTK("EXIT\n");
-}
-
 /**
  *	sata_pmp_read_gscr - read GSCR block of SATA PMP
  *	@dev: PMP device
-- 
cgit v1.2.2


From 5958e3025fd9d97429163e074d9cfa3848f51f28 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Mon, 7 Apr 2008 22:47:20 +0900
Subject: libata: move PMP SCR access failure during reset to ata_eh_reset()

If PMP fan-out reset fails and SCR isn't accessible, PMP should be
reset.  This used to be tested by sata_pmp_std_hardreset() and
communicated to EH by -ERESTART.  However, this logic is generic and
doesn't really have much to do with specific hardreset implementation.

This patch moves SCR access failure detection logic to ata_eh_reset()
where it belongs.  As this makes sata_pmp_std_hardreset() identical to
sata_std_hardreset(), the function is killed and replaced with the
standard method.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/libata-core.c |  3 +--
 drivers/ata/libata-eh.c   |  5 +++++
 drivers/ata/libata-pmp.c  | 35 -----------------------------------
 drivers/ata/sata_sil24.c  |  2 +-
 4 files changed, 7 insertions(+), 38 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index e00b620f161a..2da579b46bdd 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -91,7 +91,7 @@ const struct ata_port_operations sata_pmp_port_ops = {
 	.inherits		= &sata_port_ops,
 
 	.pmp_prereset		= ata_std_prereset,
-	.pmp_hardreset		= sata_pmp_std_hardreset,
+	.pmp_hardreset		= sata_std_hardreset,
 	.pmp_postreset		= ata_std_postreset,
 	.error_handler		= sata_pmp_error_handler,
 };
@@ -6307,7 +6307,6 @@ EXPORT_SYMBOL_GPL(ata_pci_device_resume);
 #endif /* CONFIG_PCI */
 
 EXPORT_SYMBOL_GPL(sata_pmp_qc_defer_cmd_switch);
-EXPORT_SYMBOL_GPL(sata_pmp_std_hardreset);
 EXPORT_SYMBOL_GPL(sata_pmp_error_handler);
 
 EXPORT_SYMBOL_GPL(__ata_ehi_push_desc);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 21687bbd9a70..d8c4a45dcf26 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2276,6 +2276,11 @@ int ata_eh_reset(struct ata_link *link, int classify,
 	return rc;
 
  fail:
+	/* if SCR isn't accessible on a fan-out port, PMP needs to be reset */
+	if (!ata_is_host_link(link) &&
+	    sata_scr_read(link, SCR_STATUS, &sstatus))
+		rc = -ERESTART;
+
 	if (rc == -ERESTART || try >= max_tries)
 		goto out;
 
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index 2f8a9577c26d..9c998611b644 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -175,41 +175,6 @@ int sata_pmp_scr_write(struct ata_link *link, int reg, u32 val)
 	return 0;
 }
 
-/**
- *	sata_pmp_std_hardreset - standard hardreset method for PMP link
- *	@link: link to be reset
- *	@class: resulting class of attached device
- *	@deadline: deadline jiffies for the operation
- *
- *	Hardreset PMP port @link.  Note that this function doesn't
- *	wait for BSY clearance.  There simply isn't a generic way to
- *	wait the event.  Instead, this function return -EAGAIN thus
- *	telling libata-EH to followup with softreset.
- *
- *	LOCKING:
- *	Kernel thread context (may sleep)
- *
- *	RETURNS:
- *	0 on success, -errno otherwise.
- */
-int sata_pmp_std_hardreset(struct ata_link *link, unsigned int *class,
-			   unsigned long deadline)
-{
-	u32 tmp;
-	int rc;
-
-	DPRINTK("ENTER\n");
-
-	rc = sata_std_hardreset(link, class, deadline);
-
-	/* if SCR isn't accessible, we need to reset the PMP */
-	if (rc && rc != -EAGAIN && sata_scr_read(link, SCR_STATUS, &tmp))
-		rc = -ERESTART;
-
-	DPRINTK("EXIT, rc=%d\n", rc);
-	return rc;
-}
-
 /**
  *	sata_pmp_read_gscr - read GSCR block of SATA PMP
  *	@dev: PMP device
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index b83851f6e068..fc9d48cd8122 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -944,7 +944,7 @@ static int sil24_pmp_hardreset(struct ata_link *link, unsigned int *class,
 		return rc;
 	}
 
-	return sata_pmp_std_hardreset(link, class, deadline);
+	return sata_std_hardreset(link, class, deadline);
 }
 
 static void sil24_freeze(struct ata_port *ap)
-- 
cgit v1.2.2


From 305d2a1ab137d11d573319c315748a87060fe82d Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Mon, 7 Apr 2008 22:47:20 +0900
Subject: libata: unify mechanism to request follow-up SRST

Previously, there were two ways to trigger follow-up SRST from
hardreset method - returning -EAGAIN and leaving all device classes
unmodified.  Drivers never used the latter mechanism and the only use
case for the former was when hardreset couldn't classify.

Drop the latter mechanism and let -EAGAIN mean "perform follow-up SRST
if classification is required".  This change removes unnecessary
follow-up SRSTs and simplifies reset implementations.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/ahci.c        |  3 ---
 drivers/ata/libata-core.c |  1 -
 drivers/ata/libata-eh.c   | 26 ++++++++------------------
 drivers/ata/libata-sff.c  |  1 -
 4 files changed, 8 insertions(+), 23 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index a69bcca4eb1b..3071a2341be3 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1365,7 +1365,6 @@ static int ahci_hardreset(struct ata_link *link, unsigned int *class,
 
 	ahci_start_engine(ap);
 
-	*class = ATA_DEV_NONE;
 	if (online)
 		*class = ahci_dev_classify(ap);
 
@@ -1394,7 +1393,6 @@ static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
 	/* vt8251 doesn't clear BSY on signature FIS reception,
 	 * request follow-up softreset.
 	 */
-	*class = ATA_DEV_NONE;
 	return online ? -EAGAIN : rc;
 }
 
@@ -1439,7 +1437,6 @@ static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
 		if (rc)
 			ahci_kick_engine(ap, 0);
 	}
-	*class = ATA_DEV_NONE;
 	return rc;
 }
 
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 2da579b46bdd..51876b93c1b7 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3701,7 +3701,6 @@ int sata_std_hardreset(struct ata_link *link, unsigned int *class,
 
 	/* do hardreset */
 	rc = sata_link_hardreset(link, timing, deadline, &online, NULL);
-	*class = ATA_DEV_NONE;
 	return online ? -EAGAIN : rc;
 }
 
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index d8c4a45dcf26..4ec1397434c0 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2055,20 +2055,10 @@ static int ata_do_reset(struct ata_link *link, ata_reset_fn_t reset,
 	if (rc)
 		return rc;
 
-	/* If any class isn't ATA_DEV_UNKNOWN, consider classification
-	 * is complete and convert all ATA_DEV_UNKNOWN to
-	 * ATA_DEV_NONE.
-	 */
+	/* convert all ATA_DEV_UNKNOWN to ATA_DEV_NONE */
 	ata_link_for_each_dev(dev, link)
-		if (classes[dev->devno] != ATA_DEV_UNKNOWN)
-			break;
-
-	if (dev) {
-		ata_link_for_each_dev(dev, link) {
-			if (classes[dev->devno] == ATA_DEV_UNKNOWN)
-				classes[dev->devno] = ATA_DEV_NONE;
-		}
-	}
+		if (classes[dev->devno] == ATA_DEV_UNKNOWN)
+			classes[dev->devno] = ATA_DEV_NONE;
 
 	return 0;
 }
@@ -2079,15 +2069,15 @@ static int ata_eh_followup_srst_needed(struct ata_link *link,
 {
 	if (link->flags & ATA_LFLAG_NO_SRST)
 		return 0;
-	if (rc == -EAGAIN)
-		return 1;
+	if (rc == -EAGAIN) {
+		if (classify)
+			return 1;
+		rc = 0;
+	}
 	if (rc != 0)
 		return 0;
 	if ((link->ap->flags & ATA_FLAG_PMP) && ata_is_host_link(link))
 		return 1;
-	if (classify && !(link->flags & ATA_LFLAG_ASSUME_CLASS) &&
-	    classes[0] == ATA_DEV_UNKNOWN)
-		return 1;
 	return 0;
 }
 
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index f464ca1fa261..5be8a6058dac 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -1929,7 +1929,6 @@ int sata_sff_hardreset(struct ata_link *link, unsigned int *class,
 
 	rc = sata_link_hardreset(link, timing, deadline, &online,
 				 ata_sff_check_ready);
-	*class = ATA_DEV_NONE;
 	if (online)
 		*class = ata_sff_dev_classify(link->device, 1, NULL);
 
-- 
cgit v1.2.2


From 22183bf569c8600ff414ac25f23134044e0ef453 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Mon, 7 Apr 2008 22:47:20 +0900
Subject: libata: add qc_fill_rtf port operation

On command completion, ata_qc_complete() directly called ops->tf_read
to fill qc->result_tf.  This patch adds ops->qc_fill_rtf to replace
hardcoded ops->tf_read usage.

ata_sff_qc_fill_rtf() which uses ops->tf_read to fill result_tf is
implemented and set in ata_base_port_ops and other ops tables which
don't inherit from ata_base_port_ops, so this patch doesn't introduce
any behavior change.

ops->qc_fill_rtf() is similar to ops->sff_tf_read() but can only be
called when a command finishes.  As some non-SFF controllers don't
have TF registers defined unless they're associated with in-flight
commands, this limited operation makes life easier for those drivers
and help lifting SFF assumptions from libata core layer.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/libata-core.c |  3 ++-
 drivers/ata/libata-sff.c  | 20 ++++++++++++++++++++
 drivers/ata/sata_sx4.c    |  1 +
 3 files changed, 23 insertions(+), 1 deletion(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 51876b93c1b7..3b822124e97e 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -74,6 +74,7 @@ const unsigned long sata_deb_timing_hotplug[]		= {  25,  500, 2000 };
 const unsigned long sata_deb_timing_long[]		= { 100, 2000, 5000 };
 
 const struct ata_port_operations ata_base_port_ops = {
+	.qc_fill_rtf		= ata_sff_qc_fill_rtf,
 	.prereset		= ata_std_prereset,
 	.postreset		= ata_std_postreset,
 	.error_handler		= ata_std_error_handler,
@@ -4562,7 +4563,7 @@ static void fill_result_tf(struct ata_queued_cmd *qc)
 	struct ata_port *ap = qc->ap;
 
 	qc->result_tf.flags = qc->tf.flags;
-	ap->ops->sff_tf_read(ap, &qc->result_tf);
+	ap->ops->qc_fill_rtf(qc);
 }
 
 static void ata_verify_xfer(struct ata_queued_cmd *qc)
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 5be8a6058dac..5ae813f54420 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -1407,6 +1407,25 @@ unsigned int ata_sff_qc_issue(struct ata_queued_cmd *qc)
 	return 0;
 }
 
+/**
+ *	ata_sff_qc_fill_rtf - fill result TF using ->sff_tf_read
+ *	@qc: qc to fill result TF for
+ *
+ *	@qc is finished and result TF needs to be filled.  Fill it
+ *	using ->sff_tf_read.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ *
+ *	RETURNS:
+ *	true indicating that result TF is successfully filled.
+ */
+bool ata_sff_qc_fill_rtf(struct ata_queued_cmd *qc)
+{
+	qc->ap->ops->sff_tf_read(qc->ap, &qc->result_tf);
+	return true;
+}
+
 /**
  *	ata_sff_host_intr - Handle host interrupt for given (port, task)
  *	@ap: Port on which interrupt arrived (possibly...)
@@ -2724,6 +2743,7 @@ EXPORT_SYMBOL_GPL(ata_sff_irq_on);
 EXPORT_SYMBOL_GPL(ata_sff_irq_clear);
 EXPORT_SYMBOL_GPL(ata_sff_hsm_move);
 EXPORT_SYMBOL_GPL(ata_sff_qc_issue);
+EXPORT_SYMBOL_GPL(ata_sff_qc_fill_rtf);
 EXPORT_SYMBOL_GPL(ata_sff_host_intr);
 EXPORT_SYMBOL_GPL(ata_sff_interrupt);
 EXPORT_SYMBOL_GPL(ata_sff_freeze);
diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index 6107eff731f3..ec04b8d3c791 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -251,6 +251,7 @@ static struct ata_port_operations pdc_20621_ops = {
 	.phy_reset		= pdc_20621_phy_reset,
 	.qc_prep		= pdc20621_qc_prep,
 	.qc_issue		= pdc20621_qc_issue,
+	.qc_fill_rtf		= ata_sff_qc_fill_rtf,
 	.sff_data_xfer		= ata_sff_data_xfer,
 	.eng_timeout		= pdc_eng_timeout,
 	.sff_irq_clear		= pdc20621_irq_clear,
-- 
cgit v1.2.2


From 79f97dadfe9b4b561634d202225ba2fa910dc225 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Mon, 7 Apr 2008 22:47:20 +0900
Subject: libata: drop @finish_qc from ata_qc_complete_multiple()

ata_qc_complete_multiple() took @finish_qc and called it on every qc
before completing it.  This was to give opportunity to update TF cache
before ata_qc_complete() tries to fill result_tf.  Now that result TF
is a separate operation, this is no longer necessary.

Update sata_sil24, which was the only user of this mechanism, such
that it implements its own ops->qc_fill_rtf() and drop @finish_qc from
ata_qc_complete_multiple().

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/ahci.c        |  2 +-
 drivers/ata/libata-core.c |  6 +-----
 drivers/ata/sata_sil24.c  | 19 +++++++++----------
 3 files changed, 11 insertions(+), 16 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 3071a2341be3..1389c64e0027 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1696,7 +1696,7 @@ static void ahci_port_intr(struct ata_port *ap)
 	else
 		qc_active = readl(port_mmio + PORT_CMD_ISSUE);
 
-	rc = ata_qc_complete_multiple(ap, qc_active, NULL);
+	rc = ata_qc_complete_multiple(ap, qc_active);
 
 	/* while resetting, invalid completions are expected */
 	if (unlikely(rc < 0 && !resetting)) {
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 3b822124e97e..dcc5a28e26c1 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4673,7 +4673,6 @@ void ata_qc_complete(struct ata_queued_cmd *qc)
  *	ata_qc_complete_multiple - Complete multiple qcs successfully
  *	@ap: port in question
  *	@qc_active: new qc_active mask
- *	@finish_qc: LLDD callback invoked before completing a qc
  *
  *	Complete in-flight commands.  This functions is meant to be
  *	called from low-level driver's interrupt routine to complete
@@ -4686,8 +4685,7 @@ void ata_qc_complete(struct ata_queued_cmd *qc)
  *	RETURNS:
  *	Number of completed commands on success, -errno otherwise.
  */
-int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active,
-			     void (*finish_qc)(struct ata_queued_cmd *))
+int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active)
 {
 	int nr_done = 0;
 	u32 done_mask;
@@ -4708,8 +4706,6 @@ int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active,
 			continue;
 
 		if ((qc = ata_qc_from_tag(ap, i))) {
-			if (finish_qc)
-				finish_qc(qc);
 			ata_qc_complete(qc);
 			nr_done++;
 		}
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index fc9d48cd8122..79952f825b40 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -348,6 +348,7 @@ static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
 static int sil24_qc_defer(struct ata_queued_cmd *qc);
 static void sil24_qc_prep(struct ata_queued_cmd *qc);
 static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc);
+static bool sil24_qc_fill_rtf(struct ata_queued_cmd *qc);
 static void sil24_pmp_attach(struct ata_port *ap);
 static void sil24_pmp_detach(struct ata_port *ap);
 static void sil24_freeze(struct ata_port *ap);
@@ -407,6 +408,7 @@ static struct ata_port_operations sil24_ops = {
 	.qc_defer		= sil24_qc_defer,
 	.qc_prep		= sil24_qc_prep,
 	.qc_issue		= sil24_qc_issue,
+	.qc_fill_rtf		= sil24_qc_fill_rtf,
 
 	.freeze			= sil24_freeze,
 	.thaw			= sil24_thaw,
@@ -914,6 +916,12 @@ static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc)
 	return 0;
 }
 
+static bool sil24_qc_fill_rtf(struct ata_queued_cmd *qc)
+{
+	sil24_read_tf(qc->ap, qc->tag, &qc->result_tf);
+	return true;
+}
+
 static void sil24_pmp_attach(struct ata_port *ap)
 {
 	sil24_config_pmp(ap, 1);
@@ -1098,15 +1106,6 @@ static void sil24_error_intr(struct ata_port *ap)
 	}
 }
 
-static void sil24_finish_qc(struct ata_queued_cmd *qc)
-{
-	struct ata_port *ap = qc->ap;
-	struct sil24_port_priv *pp = ap->private_data;
-
-	if (qc->flags & ATA_QCFLAG_RESULT_TF)
-		sil24_read_tf(ap, qc->tag, &pp->tf);
-}
-
 static inline void sil24_host_intr(struct ata_port *ap)
 {
 	void __iomem *port = ap->ioaddr.cmd_addr;
@@ -1131,7 +1130,7 @@ static inline void sil24_host_intr(struct ata_port *ap)
 	}
 
 	qc_active = slot_stat & ~HOST_SSTAT_ATTN;
-	rc = ata_qc_complete_multiple(ap, qc_active, sil24_finish_qc);
+	rc = ata_qc_complete_multiple(ap, qc_active);
 	if (rc > 0)
 		return;
 	if (rc < 0) {
-- 
cgit v1.2.2


From 4c9bf4e799ce06a7378f1196587084802a414c03 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Mon, 7 Apr 2008 22:47:20 +0900
Subject: libata: replace tf_read with qc_fill_rtf for non-SFF drivers

Now that all SFF stuff is separated out of core layer, core layer
doesn't call ops->tf_read directly.  It gets called only via
ops->qc_fill_rtf() for non-SFF drivers.  This patch directly
implements private ops->qc_fill_rtf() for non-SFF controllers and kill
ops->tf_read().

This is much cleaner for non-SFF controllers as some of them have to
cache SFF register values in private data structure and report the
cached values via ops->tf_read().  Also, ops->tf_read() gets nasty for
controllers which don't have clear notion of TF registers when
operation is not in progress.

As this change makes default ops->qc_fill_rtf unnecessary, move
ata_sff_qc_fill_rtf() form ata_base_port_ops to ata_sff_port_ops where
it belongs.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/ahci.c        | 21 +++++++++++----------
 drivers/ata/libata-core.c |  1 -
 drivers/ata/libata-sff.c  |  1 +
 drivers/ata/sata_fsl.c    | 24 +++++++++++++++---------
 drivers/ata/sata_sil24.c  |  8 --------
 5 files changed, 27 insertions(+), 28 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 1389c64e0027..ad5b6f384ba1 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -243,9 +243,9 @@ static int ahci_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val);
 static int ahci_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val);
 static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
 static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc);
+static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc);
 static int ahci_port_start(struct ata_port *ap);
 static void ahci_port_stop(struct ata_port *ap);
-static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
 static void ahci_qc_prep(struct ata_queued_cmd *qc);
 static u8 ahci_check_status(struct ata_port *ap);
 static void ahci_freeze(struct ata_port *ap);
@@ -295,10 +295,10 @@ static struct ata_port_operations ahci_ops = {
 	.sff_check_status	= ahci_check_status,
 	.sff_check_altstatus	= ahci_check_status,
 
-	.sff_tf_read		= ahci_tf_read,
 	.qc_defer		= sata_pmp_qc_defer_cmd_switch,
 	.qc_prep		= ahci_qc_prep,
 	.qc_issue		= ahci_qc_issue,
+	.qc_fill_rtf		= ahci_qc_fill_rtf,
 
 	.freeze			= ahci_freeze,
 	.thaw			= ahci_thaw,
@@ -1473,14 +1473,6 @@ static u8 ahci_check_status(struct ata_port *ap)
 	return readl(mmio + PORT_TFDATA) & 0xFF;
 }
 
-static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
-{
-	struct ahci_port_priv *pp = ap->private_data;
-	u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
-
-	ata_tf_from_fis(d2h_fis, tf);
-}
-
 static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl)
 {
 	struct scatterlist *sg;
@@ -1779,6 +1771,15 @@ static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc)
 	return 0;
 }
 
+static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc)
+{
+	struct ahci_port_priv *pp = qc->ap->private_data;
+	u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
+
+	ata_tf_from_fis(d2h_fis, &qc->result_tf);
+	return true;
+}
+
 static void ahci_freeze(struct ata_port *ap)
 {
 	void __iomem *port_mmio = ahci_port_base(ap);
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index dcc5a28e26c1..e8598eeeec39 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -74,7 +74,6 @@ const unsigned long sata_deb_timing_hotplug[]		= {  25,  500, 2000 };
 const unsigned long sata_deb_timing_long[]		= { 100, 2000, 5000 };
 
 const struct ata_port_operations ata_base_port_ops = {
-	.qc_fill_rtf		= ata_sff_qc_fill_rtf,
 	.prereset		= ata_std_prereset,
 	.postreset		= ata_std_postreset,
 	.error_handler		= ata_std_error_handler,
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 5ae813f54420..8e6c78ac70f8 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -44,6 +44,7 @@ const struct ata_port_operations ata_sff_port_ops = {
 
 	.qc_prep		= ata_sff_qc_prep,
 	.qc_issue		= ata_sff_qc_issue,
+	.qc_fill_rtf		= ata_sff_qc_fill_rtf,
 
 	.freeze			= ata_sff_freeze,
 	.thaw			= ata_sff_thaw,
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 37482d4e883f..e880b7ec060f 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -464,6 +464,20 @@ static unsigned int sata_fsl_qc_issue(struct ata_queued_cmd *qc)
 	return 0;
 }
 
+static bool sata_fsl_qc_fill_rtf(struct ata_queued_cmd *qc)
+{
+	struct sata_fsl_port_priv *pp = qc->ap->private_data;
+	struct sata_fsl_host_priv *host_priv = qc->ap->host->private_data;
+	void __iomem *hcr_base = host_priv->hcr_base;
+	unsigned int tag = sata_fsl_tag(qc->tag, hcr_base);
+	struct command_desc *cd;
+
+	cd = pp->cmdentry + tag;
+
+	ata_tf_from_fis(cd->sfis, &qc->result_tf);
+	return true;
+}
+
 static int sata_fsl_scr_write(struct ata_port *ap, unsigned int sc_reg_in,
 			       u32 val)
 {
@@ -580,13 +594,6 @@ static u8 sata_fsl_check_status(struct ata_port *ap)
 	return pp->tf.command;
 }
 
-static void sata_fsl_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
-{
-	struct sata_fsl_port_priv *pp = ap->private_data;
-
-	*tf = pp->tf;
-}
-
 static int sata_fsl_port_start(struct ata_port *ap)
 {
 	struct device *dev = ap->host->dev;
@@ -1193,10 +1200,9 @@ static const struct ata_port_operations sata_fsl_ops = {
 	.sff_check_status = sata_fsl_check_status,
 	.sff_check_altstatus = sata_fsl_check_status,
 
-	.sff_tf_read = sata_fsl_tf_read,
-
 	.qc_prep = sata_fsl_qc_prep,
 	.qc_issue = sata_fsl_qc_issue,
+	.qc_fill_rtf = sata_fsl_qc_fill_rtf,
 
 	.scr_read = sata_fsl_scr_read,
 	.scr_write = sata_fsl_scr_write,
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 79952f825b40..51a7c06803df 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -344,7 +344,6 @@ static void sil24_dev_config(struct ata_device *dev);
 static u8 sil24_check_status(struct ata_port *ap);
 static int sil24_scr_read(struct ata_port *ap, unsigned sc_reg, u32 *val);
 static int sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val);
-static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
 static int sil24_qc_defer(struct ata_queued_cmd *qc);
 static void sil24_qc_prep(struct ata_queued_cmd *qc);
 static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc);
@@ -404,7 +403,6 @@ static struct ata_port_operations sil24_ops = {
 
 	.sff_check_status	= sil24_check_status,
 	.sff_check_altstatus	= sil24_check_status,
-	.sff_tf_read		= sil24_tf_read,
 	.qc_defer		= sil24_qc_defer,
 	.qc_prep		= sil24_qc_prep,
 	.qc_issue		= sil24_qc_issue,
@@ -533,12 +531,6 @@ static int sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val)
 	return -EINVAL;
 }
 
-static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
-{
-	struct sil24_port_priv *pp = ap->private_data;
-	*tf = pp->tf;
-}
-
 static void sil24_config_port(struct ata_port *ap)
 {
 	void __iomem *port = ap->ioaddr.cmd_addr;
-- 
cgit v1.2.2


From 520d06f92b32d7abe5127d7cc46a819db0f384e6 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Mon, 7 Apr 2008 22:47:21 +0900
Subject: libata: remove check_status from non-SFF drivers

Now that all SFF stuff is separated out of core layer, core layer
doesn't call ops->[alt_]check_status().  In fact, no one calls them
for non-SFF drivers anymore.  Kill them.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/ahci.c       | 14 ++---------
 drivers/ata/sata_fsl.c   | 60 ++++--------------------------------------------
 drivers/ata/sata_sil24.c | 17 ++------------
 3 files changed, 8 insertions(+), 83 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index ad5b6f384ba1..9642a7103cb6 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -247,7 +247,6 @@ static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc);
 static int ahci_port_start(struct ata_port *ap);
 static void ahci_port_stop(struct ata_port *ap);
 static void ahci_qc_prep(struct ata_queued_cmd *qc);
-static u8 ahci_check_status(struct ata_port *ap);
 static void ahci_freeze(struct ata_port *ap);
 static void ahci_thaw(struct ata_port *ap);
 static void ahci_pmp_attach(struct ata_port *ap);
@@ -292,9 +291,6 @@ static struct scsi_host_template ahci_sht = {
 static struct ata_port_operations ahci_ops = {
 	.inherits		= &sata_pmp_port_ops,
 
-	.sff_check_status	= ahci_check_status,
-	.sff_check_altstatus	= ahci_check_status,
-
 	.qc_defer		= sata_pmp_qc_defer_cmd_switch,
 	.qc_prep		= ahci_qc_prep,
 	.qc_issue		= ahci_qc_issue,
@@ -1185,11 +1181,12 @@ static int ahci_kick_engine(struct ata_port *ap, int force_restart)
 {
 	void __iomem *port_mmio = ap->ioaddr.cmd_addr;
 	struct ahci_host_priv *hpriv = ap->host->private_data;
+	u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
 	u32 tmp;
 	int busy, rc;
 
 	/* do we need to kick the port? */
-	busy = ahci_check_status(ap) & (ATA_BUSY | ATA_DRQ);
+	busy = status & (ATA_BUSY | ATA_DRQ);
 	if (!busy && !force_restart)
 		return 0;
 
@@ -1466,13 +1463,6 @@ static int ahci_pmp_softreset(struct ata_link *link, unsigned int *class,
 	return ahci_do_softreset(link, class, link->pmp, deadline);
 }
 
-static u8 ahci_check_status(struct ata_port *ap)
-{
-	void __iomem *mmio = ap->ioaddr.cmd_addr;
-
-	return readl(mmio + PORT_TFDATA) & 0xFF;
-}
-
 static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl)
 {
 	struct scatterlist *sg;
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index e880b7ec060f..0cb0a57ddb36 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -244,17 +244,6 @@ struct sata_fsl_port_priv {
 	dma_addr_t cmdslot_paddr;
 	struct command_desc *cmdentry;
 	dma_addr_t cmdentry_paddr;
-
-	/*
-	 * SATA FSL controller has a Status FIS which should contain the
-	 * received D2H FIS & taskfile registers. This SFIS is present in
-	 * the command descriptor, and to have a ready reference to it,
-	 * we are caching it here, quite similar to what is done in H/W on
-	 * AHCI compliant devices by copying taskfile fields to a 32-bit
-	 * register.
-	 */
-
-	struct ata_taskfile tf;
 };
 
 /*
@@ -569,31 +558,6 @@ static void sata_fsl_thaw(struct ata_port *ap)
 		ioread32(hcr_base + HCONTROL), ioread32(hcr_base + HSTATUS));
 }
 
-/*
- * NOTE : 1st D2H FIS from device does not update sfis in command descriptor.
- */
-static inline void sata_fsl_cache_taskfile_from_d2h_fis(struct ata_queued_cmd
-							*qc,
-							struct ata_port *ap)
-{
-	struct sata_fsl_port_priv *pp = ap->private_data;
-	struct sata_fsl_host_priv *host_priv = ap->host->private_data;
-	void __iomem *hcr_base = host_priv->hcr_base;
-	unsigned int tag = sata_fsl_tag(qc->tag, hcr_base);
-	struct command_desc *cd;
-
-	cd = pp->cmdentry + tag;
-
-	ata_tf_from_fis(cd->sfis, &pp->tf);
-}
-
-static u8 sata_fsl_check_status(struct ata_port *ap)
-{
-	struct sata_fsl_port_priv *pp = ap->private_data;
-
-	return pp->tf.command;
-}
-
 static int sata_fsl_port_start(struct ata_port *ap)
 {
 	struct device *dev = ap->host->dev;
@@ -1004,10 +968,9 @@ static void sata_fsl_error_intr(struct ata_port *ap)
 	/* record error info */
 	qc = ata_qc_from_tag(ap, link->active_tag);
 
-	if (qc) {
-		sata_fsl_cache_taskfile_from_d2h_fis(qc, qc->ap);
+	if (qc)
 		qc->err_mask |= err_mask;
-	} else
+	else
 		ehi->err_mask |= err_mask;
 
 	ehi->action |= action;
@@ -1020,14 +983,6 @@ static void sata_fsl_error_intr(struct ata_port *ap)
 		ata_port_abort(ap);
 }
 
-static void sata_fsl_qc_complete(struct ata_queued_cmd *qc)
-{
-	if (qc->flags & ATA_QCFLAG_RESULT_TF) {
-		DPRINTK("xx_qc_complete called\n");
-		sata_fsl_cache_taskfile_from_d2h_fis(qc, qc->ap);
-	}
-}
-
 static void sata_fsl_host_intr(struct ata_port *ap)
 {
 	struct ata_link *link = &ap->link;
@@ -1068,10 +1023,8 @@ static void sata_fsl_host_intr(struct ata_port *ap)
 		for (i = 0; i < SATA_FSL_QUEUE_DEPTH; i++) {
 			if (qc_active & (1 << i)) {
 				qc = ata_qc_from_tag(ap, i);
-				if (qc) {
-					sata_fsl_qc_complete(qc);
+				if (qc)
 					ata_qc_complete(qc);
-				}
 				DPRINTK
 				    ("completing ncq cmd,tag=%d,CC=0x%x,CA=0x%x\n",
 				     i, ioread32(hcr_base + CC),
@@ -1087,10 +1040,8 @@ static void sata_fsl_host_intr(struct ata_port *ap)
 		DPRINTK("completing non-ncq cmd, tag=%d,CC=0x%x\n",
 			link->active_tag, ioread32(hcr_base + CC));
 
-		if (qc) {
-			sata_fsl_qc_complete(qc);
+		if (qc)
 			ata_qc_complete(qc);
-		}
 	} else {
 		/* Spurious Interrupt!! */
 		DPRINTK("spurious interrupt!!, CC = 0x%x\n",
@@ -1197,9 +1148,6 @@ static struct scsi_host_template sata_fsl_sht = {
 static const struct ata_port_operations sata_fsl_ops = {
 	.inherits = &sata_port_ops,
 
-	.sff_check_status = sata_fsl_check_status,
-	.sff_check_altstatus = sata_fsl_check_status,
-
 	.qc_prep = sata_fsl_qc_prep,
 	.qc_issue = sata_fsl_qc_issue,
 	.qc_fill_rtf = sata_fsl_qc_fill_rtf,
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 51a7c06803df..15a4067149b7 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -336,12 +336,10 @@ static struct sil24_cerr_info {
 struct sil24_port_priv {
 	union sil24_cmd_block *cmd_block;	/* 32 cmd blocks */
 	dma_addr_t cmd_block_dma;		/* DMA base addr for them */
-	struct ata_taskfile tf;			/* Cached taskfile registers */
 	int do_port_rst;
 };
 
 static void sil24_dev_config(struct ata_device *dev);
-static u8 sil24_check_status(struct ata_port *ap);
 static int sil24_scr_read(struct ata_port *ap, unsigned sc_reg, u32 *val);
 static int sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val);
 static int sil24_qc_defer(struct ata_queued_cmd *qc);
@@ -401,8 +399,6 @@ static struct scsi_host_template sil24_sht = {
 static struct ata_port_operations sil24_ops = {
 	.inherits		= &sata_pmp_port_ops,
 
-	.sff_check_status	= sil24_check_status,
-	.sff_check_altstatus	= sil24_check_status,
 	.qc_defer		= sil24_qc_defer,
 	.qc_prep		= sil24_qc_prep,
 	.qc_issue		= sil24_qc_issue,
@@ -492,12 +488,6 @@ static void sil24_read_tf(struct ata_port *ap, int tag, struct ata_taskfile *tf)
 	ata_tf_from_fis(fis, tf);
 }
 
-static u8 sil24_check_status(struct ata_port *ap)
-{
-	struct sil24_port_priv *pp = ap->private_data;
-	return pp->tf.command;
-}
-
 static int sil24_scr_map[] = {
 	[SCR_CONTROL]	= 0,
 	[SCR_STATUS]	= 1,
@@ -1074,10 +1064,9 @@ static void sil24_error_intr(struct ata_port *ap)
 		}
 
 		/* record error info */
-		if (qc) {
-			sil24_read_tf(ap, qc->tag, &pp->tf);
+		if (qc)
 			qc->err_mask |= err_mask;
-		} else
+		else
 			ehi->err_mask |= err_mask;
 
 		ehi->action |= action;
@@ -1210,8 +1199,6 @@ static int sil24_port_start(struct ata_port *ap)
 	if (!pp)
 		return -ENOMEM;
 
-	pp->tf.command = ATA_DRDY;
-
 	cb = dmam_alloc_coherent(dev, cb_size, &cb_dma, GFP_KERNEL);
 	if (!cb)
 		return -ENOMEM;
-- 
cgit v1.2.2


From c9f75b04ed5ed65a058d18a8a8dda50632a96de8 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Mon, 7 Apr 2008 22:47:21 +0900
Subject: libata: kill ata_noop_dev_select()

Now that SFF assumptions are separated out from non-SFF reset
sequence, port_ops->sff_dev_select() is no longer necessary for
non-SFF controllers.  Kill ata_noop_dev_select() and ->sff_dev_select
initialization from base and other non-SFF port_ops.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/libata-core.c | 19 -------------------
 1 file changed, 19 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index e8598eeeec39..f23f50af551c 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -84,7 +84,6 @@ const struct ata_port_operations sata_port_ops = {
 
 	.qc_defer		= ata_std_qc_defer,
 	.hardreset		= sata_std_hardreset,
-	.sff_dev_select		= ata_noop_dev_select,
 };
 
 const struct ata_port_operations sata_pmp_port_ops = {
@@ -1431,22 +1430,6 @@ static int ata_hpa_resize(struct ata_device *dev)
 	return 0;
 }
 
-/**
- *	ata_noop_dev_select - Select device 0/1 on ATA bus
- *	@ap: ATA channel to manipulate
- *	@device: ATA device (numbered from zero) to select
- *
- *	This function performs no actual function.
- *
- *	May be used as the dev_select() entry in ata_port_operations.
- *
- *	LOCKING:
- *	caller.
- */
-void ata_noop_dev_select(struct ata_port *ap, unsigned int device)
-{
-}
-
 /**
  *	ata_dump_id - IDENTIFY DEVICE info debugging output
  *	@id: IDENTIFY DEVICE page to dump
@@ -6193,7 +6176,6 @@ static unsigned int ata_dummy_qc_issue(struct ata_queued_cmd *qc)
 struct ata_port_operations ata_dummy_port_ops = {
 	.sff_check_status	= ata_dummy_check_status,
 	.sff_check_altstatus	= ata_dummy_check_status,
-	.sff_dev_select		= ata_noop_dev_select,
 	.qc_prep		= ata_noop_qc_prep,
 	.qc_issue		= ata_dummy_qc_issue,
 	.freeze			= ata_dummy_noret,
@@ -6234,7 +6216,6 @@ EXPORT_SYMBOL_GPL(ata_host_detach);
 EXPORT_SYMBOL_GPL(ata_sg_init);
 EXPORT_SYMBOL_GPL(ata_qc_complete);
 EXPORT_SYMBOL_GPL(ata_qc_complete_multiple);
-EXPORT_SYMBOL_GPL(ata_noop_dev_select);
 EXPORT_SYMBOL_GPL(sata_print_link_status);
 EXPORT_SYMBOL_GPL(atapi_cmd_type);
 EXPORT_SYMBOL_GPL(ata_tf_to_fis);
-- 
cgit v1.2.2


From 182d7bbac322d6921ce81f8e6aa23d250816381d Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Mon, 7 Apr 2008 22:47:21 +0900
Subject: libata: clean up dummy port_ops

Now that SFF assumptions are removed from core layer, dummy port_ops
can be slimmed down.  Chop it down.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/libata-core.c | 22 +++++-----------------
 1 file changed, 5 insertions(+), 17 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index f23f50af551c..3a94c69c7fe7 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -6159,32 +6159,20 @@ u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val,
 /*
  * Dummy port_ops
  */
-static void ata_dummy_noret(struct ata_port *ap)	{ }
-static int ata_dummy_ret0(struct ata_port *ap)		{ return 0; }
-static void ata_dummy_qc_noret(struct ata_queued_cmd *qc) { }
-
-static u8 ata_dummy_check_status(struct ata_port *ap)
+static unsigned int ata_dummy_qc_issue(struct ata_queued_cmd *qc)
 {
-	return ATA_DRDY;
+	return AC_ERR_SYSTEM;
 }
 
-static unsigned int ata_dummy_qc_issue(struct ata_queued_cmd *qc)
+static void ata_dummy_error_handler(struct ata_port *ap)
 {
-	return AC_ERR_SYSTEM;
+	/* truly dummy */
 }
 
 struct ata_port_operations ata_dummy_port_ops = {
-	.sff_check_status	= ata_dummy_check_status,
-	.sff_check_altstatus	= ata_dummy_check_status,
 	.qc_prep		= ata_noop_qc_prep,
 	.qc_issue		= ata_dummy_qc_issue,
-	.freeze			= ata_dummy_noret,
-	.thaw			= ata_dummy_noret,
-	.error_handler		= ata_dummy_noret,
-	.post_internal_cmd	= ata_dummy_qc_noret,
-	.sff_irq_clear		= ata_dummy_noret,
-	.port_start		= ata_dummy_ret0,
-	.port_stop		= ata_dummy_noret,
+	.error_handler		= ata_dummy_error_handler,
 };
 
 const struct ata_port_info ata_dummy_port_info = {
-- 
cgit v1.2.2


From 350756f6dab6d37ef9ed3f18dec520e88969ddac Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Mon, 7 Apr 2008 22:47:21 +0900
Subject: libata: don't use ap->ioaddr in non-SFF drivers

ap->ioaddr is to carry addresses for TF and BMDMA registers of a SFF
controller, don't abuse it in non-SFF controllers.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/ahci.c       | 15 ++++--------
 drivers/ata/sata_fsl.c   |  5 ----
 drivers/ata/sata_sil24.c | 60 +++++++++++++++++++++++++-----------------------
 3 files changed, 36 insertions(+), 44 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 9642a7103cb6..6281f7f9eae6 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1179,7 +1179,7 @@ static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
 
 static int ahci_kick_engine(struct ata_port *ap, int force_restart)
 {
-	void __iomem *port_mmio = ap->ioaddr.cmd_addr;
+	void __iomem *port_mmio = ahci_port_base(ap);
 	struct ahci_host_priv *hpriv = ap->host->private_data;
 	u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
 	u32 tmp;
@@ -1255,8 +1255,8 @@ static int ahci_exec_polled_cmd(struct ata_port *ap, int pmp,
 
 static int ahci_check_ready(struct ata_link *link)
 {
-	void __iomem *mmio = link->ap->ioaddr.cmd_addr;
-	u8 status = readl(mmio + PORT_TFDATA) & 0xFF;
+	void __iomem *port_mmio = ahci_port_base(link->ap);
+	u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
 
 	if (!(status & ATA_BUSY))
 		return 1;
@@ -1616,7 +1616,7 @@ static void ahci_error_intr(struct ata_port *ap, u32 irq_stat)
 
 static void ahci_port_intr(struct ata_port *ap)
 {
-	void __iomem *port_mmio = ap->ioaddr.cmd_addr;
+	void __iomem *port_mmio = ahci_port_base(ap);
 	struct ata_eh_info *ehi = &ap->link.eh_info;
 	struct ahci_port_priv *pp = ap->private_data;
 	struct ahci_host_priv *hpriv = ap->host->private_data;
@@ -2210,7 +2210,6 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	for (i = 0; i < host->n_ports; i++) {
 		struct ata_port *ap = host->ports[i];
-		void __iomem *port_mmio = ahci_port_base(ap);
 
 		ata_port_pbar_desc(ap, AHCI_PCI_BAR, -1, "abar");
 		ata_port_pbar_desc(ap, AHCI_PCI_BAR,
@@ -2219,12 +2218,8 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		/* set initial link pm policy */
 		ap->pm_policy = NOT_AVAILABLE;
 
-		/* standard SATA port setup */
-		if (hpriv->port_map & (1 << i))
-			ap->ioaddr.cmd_addr = port_mmio;
-
 		/* disabled/not-implemented port */
-		else
+		if (!(hpriv->port_map & (1 << i)))
 			ap->ops = &ata_dummy_port_ops;
 	}
 
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 0cb0a57ddb36..9c4e6a6698c2 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -1222,11 +1222,6 @@ static int sata_fsl_probe(struct of_device *ofdev,
 	/* host->iomap is not used currently */
 	host->private_data = host_priv;
 
-	/* setup port(s) */
-
-	host->ports[0]->ioaddr.cmd_addr = host_priv->hcr_base;
-	host->ports[0]->ioaddr.scr_addr = host_priv->ssr_base;
-
 	/* initialize host controller */
 	sata_fsl_init_controller(host);
 
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 15a4067149b7..6039614e956c 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -467,9 +467,19 @@ static int sil24_tag(int tag)
 	return tag;
 }
 
+static unsigned long sil24_port_offset(struct ata_port *ap)
+{
+	return ap->port_no * PORT_REGS_SIZE;
+}
+
+static void __iomem *sil24_port_base(struct ata_port *ap)
+{
+	return ap->host->iomap[SIL24_PORT_BAR] + sil24_port_offset(ap);
+}
+
 static void sil24_dev_config(struct ata_device *dev)
 {
-	void __iomem *port = dev->link->ap->ioaddr.cmd_addr;
+	void __iomem *port = sil24_port_base(dev->link->ap);
 
 	if (dev->cdb_len == 16)
 		writel(PORT_CS_CDB16, port + PORT_CTRL_STAT);
@@ -479,7 +489,7 @@ static void sil24_dev_config(struct ata_device *dev)
 
 static void sil24_read_tf(struct ata_port *ap, int tag, struct ata_taskfile *tf)
 {
-	void __iomem *port = ap->ioaddr.cmd_addr;
+	void __iomem *port = sil24_port_base(ap);
 	struct sil24_prb __iomem *prb;
 	u8 fis[6 * 4];
 
@@ -497,7 +507,7 @@ static int sil24_scr_map[] = {
 
 static int sil24_scr_read(struct ata_port *ap, unsigned sc_reg, u32 *val)
 {
-	void __iomem *scr_addr = ap->ioaddr.scr_addr;
+	void __iomem *scr_addr = sil24_port_base(ap) + PORT_SCONTROL;
 
 	if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
 		void __iomem *addr;
@@ -510,7 +520,7 @@ static int sil24_scr_read(struct ata_port *ap, unsigned sc_reg, u32 *val)
 
 static int sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val)
 {
-	void __iomem *scr_addr = ap->ioaddr.scr_addr;
+	void __iomem *scr_addr = sil24_port_base(ap) + PORT_SCONTROL;
 
 	if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
 		void __iomem *addr;
@@ -523,7 +533,7 @@ static int sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val)
 
 static void sil24_config_port(struct ata_port *ap)
 {
-	void __iomem *port = ap->ioaddr.cmd_addr;
+	void __iomem *port = sil24_port_base(ap);
 
 	/* configure IRQ WoC */
 	if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC)
@@ -548,7 +558,7 @@ static void sil24_config_port(struct ata_port *ap)
 
 static void sil24_config_pmp(struct ata_port *ap, int attached)
 {
-	void __iomem *port = ap->ioaddr.cmd_addr;
+	void __iomem *port = sil24_port_base(ap);
 
 	if (attached)
 		writel(PORT_CS_PMP_EN, port + PORT_CTRL_STAT);
@@ -558,7 +568,7 @@ static void sil24_config_pmp(struct ata_port *ap, int attached)
 
 static void sil24_clear_pmp(struct ata_port *ap)
 {
-	void __iomem *port = ap->ioaddr.cmd_addr;
+	void __iomem *port = sil24_port_base(ap);
 	int i;
 
 	writel(PORT_CS_PMP_RESUME, port + PORT_CTRL_CLR);
@@ -573,7 +583,7 @@ static void sil24_clear_pmp(struct ata_port *ap)
 
 static int sil24_init_port(struct ata_port *ap)
 {
-	void __iomem *port = ap->ioaddr.cmd_addr;
+	void __iomem *port = sil24_port_base(ap);
 	struct sil24_port_priv *pp = ap->private_data;
 	u32 tmp;
 
@@ -601,7 +611,7 @@ static int sil24_exec_polled_cmd(struct ata_port *ap, int pmp,
 				 int is_cmd, u32 ctrl,
 				 unsigned long timeout_msec)
 {
-	void __iomem *port = ap->ioaddr.cmd_addr;
+	void __iomem *port = sil24_port_base(ap);
 	struct sil24_port_priv *pp = ap->private_data;
 	struct sil24_prb *prb = &pp->cmd_block[0].ata.prb;
 	dma_addr_t paddr = pp->cmd_block_dma;
@@ -706,7 +716,7 @@ static int sil24_hardreset(struct ata_link *link, unsigned int *class,
 			   unsigned long deadline)
 {
 	struct ata_port *ap = link->ap;
-	void __iomem *port = ap->ioaddr.cmd_addr;
+	void __iomem *port = sil24_port_base(ap);
 	struct sil24_port_priv *pp = ap->private_data;
 	int did_port_rst = 0;
 	const char *reason;
@@ -884,7 +894,7 @@ static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
 	struct sil24_port_priv *pp = ap->private_data;
-	void __iomem *port = ap->ioaddr.cmd_addr;
+	void __iomem *port = sil24_port_base(ap);
 	unsigned int tag = sil24_tag(qc->tag);
 	dma_addr_t paddr;
 	void __iomem *activate;
@@ -939,7 +949,7 @@ static int sil24_pmp_hardreset(struct ata_link *link, unsigned int *class,
 
 static void sil24_freeze(struct ata_port *ap)
 {
-	void __iomem *port = ap->ioaddr.cmd_addr;
+	void __iomem *port = sil24_port_base(ap);
 
 	/* Port-wide IRQ mask in HOST_CTRL doesn't really work, clear
 	 * PORT_IRQ_ENABLE instead.
@@ -949,7 +959,7 @@ static void sil24_freeze(struct ata_port *ap)
 
 static void sil24_thaw(struct ata_port *ap)
 {
-	void __iomem *port = ap->ioaddr.cmd_addr;
+	void __iomem *port = sil24_port_base(ap);
 	u32 tmp;
 
 	/* clear IRQ */
@@ -962,7 +972,7 @@ static void sil24_thaw(struct ata_port *ap)
 
 static void sil24_error_intr(struct ata_port *ap)
 {
-	void __iomem *port = ap->ioaddr.cmd_addr;
+	void __iomem *port = sil24_port_base(ap);
 	struct sil24_port_priv *pp = ap->private_data;
 	struct ata_queued_cmd *qc = NULL;
 	struct ata_link *link;
@@ -1089,7 +1099,7 @@ static void sil24_error_intr(struct ata_port *ap)
 
 static inline void sil24_host_intr(struct ata_port *ap)
 {
-	void __iomem *port = ap->ioaddr.cmd_addr;
+	void __iomem *port = sil24_port_base(ap);
 	u32 slot_stat, qc_active;
 	int rc;
 
@@ -1209,6 +1219,9 @@ static int sil24_port_start(struct ata_port *ap)
 
 	ap->private_data = pp;
 
+	ata_port_pbar_desc(ap, SIL24_HOST_BAR, -1, "host");
+	ata_port_pbar_desc(ap, SIL24_PORT_BAR, sil24_port_offset(ap), "port");
+
 	return 0;
 }
 
@@ -1227,7 +1240,8 @@ static void sil24_init_controller(struct ata_host *host)
 	/* init ports */
 	for (i = 0; i < host->n_ports; i++) {
 		struct ata_port *ap = host->ports[i];
-		void __iomem *port = ap->ioaddr.cmd_addr;
+		void __iomem *port = sil24_port_base(ap);
+
 
 		/* Initial PHY setting */
 		writel(0x20c, port + PORT_PHY_CFG);
@@ -1260,7 +1274,7 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	const struct ata_port_info *ppi[] = { &pi, NULL };
 	void __iomem * const *iomap;
 	struct ata_host *host;
-	int i, rc;
+	int rc;
 	u32 tmp;
 
 	/* cause link error if sil24_cmd_block is sized wrongly */
@@ -1300,18 +1314,6 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		return -ENOMEM;
 	host->iomap = iomap;
 
-	for (i = 0; i < host->n_ports; i++) {
-		struct ata_port *ap = host->ports[i];
-		size_t offset = ap->port_no * PORT_REGS_SIZE;
-		void __iomem *port = iomap[SIL24_PORT_BAR] + offset;
-
-		host->ports[i]->ioaddr.cmd_addr = port;
-		host->ports[i]->ioaddr.scr_addr = port + PORT_SCONTROL;
-
-		ata_port_pbar_desc(ap, SIL24_HOST_BAR, -1, "host");
-		ata_port_pbar_desc(ap, SIL24_PORT_BAR, offset, "port");
-	}
-
 	/* configure and activate the device */
 	if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
 		rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
-- 
cgit v1.2.2


From 127102aea2ea9ec4e9ca233e2b1a75c8d3b058c4 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Mon, 7 Apr 2008 22:47:21 +0900
Subject: libata: make SFF support optional

Now that SFF support is completely separated out from the core layer,
it can be made optional.  Add CONFIG_ATA_SFF and let SFF drivers
depend on it.  If CONFIG_ATA_SFF isn't set, all codes in libata-sff.c
and data structures for SFF support are disabled.  This saves good
number of bytes for small systems.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/Kconfig       | 44 +++++++++++++++++++++++++++-----------------
 drivers/ata/Makefile      |  4 ++--
 drivers/ata/libata-core.c |  2 ++
 drivers/ata/libata-scsi.c |  2 ++
 drivers/ata/libata.h      |  4 ++++
 5 files changed, 37 insertions(+), 19 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index ea665c249035..48c8fc55391e 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -49,6 +49,32 @@ config SATA_AHCI
 
 	  If unsure, say N.
 
+config SATA_SIL24
+	tristate "Silicon Image 3124/3132 SATA support"
+	depends on PCI
+	help
+	  This option enables support for Silicon Image 3124/3132 Serial ATA.
+
+	  If unsure, say N.
+
+config SATA_FSL
+	tristate "Freescale 3.0Gbps SATA support"
+	depends on FSL_SOC
+	help
+	  This option enables support for Freescale 3.0Gbps SATA controller.
+	  It can be found on MPC837x and MPC8315.
+
+	  If unsure, say N.
+
+config ATA_SFF
+	bool "ATA SFF support"
+	default y
+	help
+	  This option adds support for ATA controllers with SFF
+	  compliant or similar programming interface.
+
+if ATA_SFF
+
 config SATA_SVW
 	tristate "ServerWorks Frodo / Apple K2 SATA support"
 	depends on PCI
@@ -125,14 +151,6 @@ config SATA_SIL
 
 	  If unsure, say N.
 
-config SATA_SIL24
-	tristate "Silicon Image 3124/3132 SATA support"
-	depends on PCI
-	help
-	  This option enables support for Silicon Image 3124/3132 Serial ATA.
-
-	  If unsure, say N.
-
 config SATA_SIS
 	tristate "SiS 964/965/966/180 SATA support"
 	depends on PCI
@@ -183,15 +201,6 @@ config PATA_ACPI
 	  firmware in the BIOS. This driver can sometimes handle
 	  otherwise unsupported hardware.
 
-config SATA_FSL
-	tristate "Freescale 3.0Gbps SATA support"
-	depends on FSL_SOC
-	help
-	  This option enables support for Freescale 3.0Gbps SATA controller.
-	  It can be found on MPC837x and MPC8315.
-
-	  If unsure, say N.
-
 config PATA_ALI
 	tristate "ALi PATA support (Experimental)"
 	depends on PCI && EXPERIMENTAL
@@ -679,4 +688,5 @@ config PATA_BF54X
 
 	  If unsure, say N.
 
+endif # ATA_SFF
 endif # ATA
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 0511e6f0bb58..e6e41b2c731c 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -78,6 +78,6 @@ obj-$(CONFIG_ATA_GENERIC)	+= ata_generic.o
 # Should be last libata driver
 obj-$(CONFIG_PATA_LEGACY)	+= pata_legacy.o
 
-libata-objs	:= libata-core.o libata-scsi.o libata-sff.o libata-eh.o \
-		   libata-pmp.o
+libata-objs	:= libata-core.o libata-scsi.o libata-eh.o libata-pmp.o
+libata-$(CONFIG_ATA_SFF)	+= libata-sff.o
 libata-$(CONFIG_ATA_ACPI)	+= libata-acpi.o
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 3a94c69c7fe7..ca60af0cb051 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5195,7 +5195,9 @@ struct ata_port *ata_port_alloc(struct ata_host *host)
 	ap->msg_enable = ATA_MSG_DRV | ATA_MSG_ERR | ATA_MSG_WARN;
 #endif
 
+#ifdef CONFIG_ATA_SFF
 	INIT_DELAYED_WORK(&ap->port_task, ata_pio_task);
+#endif
 	INIT_DELAYED_WORK(&ap->hotplug_task, ata_scsi_hotplug);
 	INIT_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan);
 	INIT_LIST_HEAD(&ap->eh_done_q);
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index f8be92836a6e..a70881c408e5 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2393,7 +2393,9 @@ static void atapi_request_sense(struct ata_queued_cmd *qc)
 	/* FIXME: is this needed? */
 	memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
 
+#ifdef CONFIG_ATA_SFF
 	ap->ops->sff_tf_read(ap, &qc->tf);
+#endif
 
 	/* fill these in, for the case where they are -not- overwritten */
 	cmd->sense_buffer[0] = 0x70;
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 87f54a1db3b0..6b70a624828c 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -42,8 +42,10 @@ static inline int ata_is_builtin_hardreset(ata_reset_fn_t reset)
 {
 	if (reset == sata_std_hardreset)
 		return 1;
+#ifdef CONFIG_ATA_SFF
 	if (reset == sata_sff_hardreset)
 		return 1;
+#endif
 	return 0;
 }
 
@@ -206,9 +208,11 @@ extern int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
 extern void ata_eh_finish(struct ata_port *ap);
 
 /* libata-sff.c */
+#ifdef CONFIG_ATA_SFF
 extern void ata_dev_select(struct ata_port *ap, unsigned int device,
                            unsigned int wait, unsigned int can_sleep);
 extern u8 ata_irq_on(struct ata_port *ap);
 extern void ata_pio_task(struct work_struct *work);
+#endif /* CONFIG_ATA_SFF */
 
 #endif /* __LIBATA_H__ */
-- 
cgit v1.2.2


From 48515f6c006c2a9d7b624ee8ad068018c2d3fe0e Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Mon, 7 Apr 2008 22:47:21 +0900
Subject: libata: separate PMP support code from core code

Most of PMP support code is already in libata-pmp.c.  All that are in
libata-core.c are sata_pmp_port_ops and EXPORTs.  Move them to
libata-pmp.c.  Also, collect PMP related prototypes and declarations
in header files and move them right above of SFF stuff.

This change is to make PMP support optional.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/libata-core.c | 13 -------------
 drivers/ata/libata-pmp.c  | 12 ++++++++++++
 drivers/ata/libata.h      | 10 +++++-----
 3 files changed, 17 insertions(+), 18 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index ca60af0cb051..b2d5d63fb6c9 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -86,15 +86,6 @@ const struct ata_port_operations sata_port_ops = {
 	.hardreset		= sata_std_hardreset,
 };
 
-const struct ata_port_operations sata_pmp_port_ops = {
-	.inherits		= &sata_port_ops,
-
-	.pmp_prereset		= ata_std_prereset,
-	.pmp_hardreset		= sata_std_hardreset,
-	.pmp_postreset		= ata_std_postreset,
-	.error_handler		= sata_pmp_error_handler,
-};
-
 static unsigned int ata_dev_init_params(struct ata_device *dev,
 					u16 heads, u16 sectors);
 static unsigned int ata_dev_set_xfermode(struct ata_device *dev);
@@ -6192,7 +6183,6 @@ EXPORT_SYMBOL_GPL(sata_deb_timing_hotplug);
 EXPORT_SYMBOL_GPL(sata_deb_timing_long);
 EXPORT_SYMBOL_GPL(ata_base_port_ops);
 EXPORT_SYMBOL_GPL(sata_port_ops);
-EXPORT_SYMBOL_GPL(sata_pmp_port_ops);
 EXPORT_SYMBOL_GPL(ata_dummy_port_ops);
 EXPORT_SYMBOL_GPL(ata_dummy_port_info);
 EXPORT_SYMBOL_GPL(ata_std_bios_param);
@@ -6272,9 +6262,6 @@ EXPORT_SYMBOL_GPL(ata_pci_device_resume);
 #endif /* CONFIG_PM */
 #endif /* CONFIG_PCI */
 
-EXPORT_SYMBOL_GPL(sata_pmp_qc_defer_cmd_switch);
-EXPORT_SYMBOL_GPL(sata_pmp_error_handler);
-
 EXPORT_SYMBOL_GPL(__ata_ehi_push_desc);
 EXPORT_SYMBOL_GPL(ata_ehi_push_desc);
 EXPORT_SYMBOL_GPL(ata_ehi_clear_desc);
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index 9c998611b644..bb10c0630791 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -11,6 +11,14 @@
 #include <linux/libata.h>
 #include "libata.h"
 
+const struct ata_port_operations sata_pmp_port_ops = {
+	.inherits		= &sata_port_ops,
+	.pmp_prereset		= ata_std_prereset,
+	.pmp_hardreset		= sata_std_hardreset,
+	.pmp_postreset		= ata_std_postreset,
+	.error_handler		= sata_pmp_error_handler,
+};
+
 /**
  *	sata_pmp_read - read PMP register
  *	@link: link to read PMP register for
@@ -1012,3 +1020,7 @@ void sata_pmp_error_handler(struct ata_port *ap)
 	sata_pmp_eh_recover(ap);
 	ata_eh_finish(ap);
 }
+
+EXPORT_SYMBOL_GPL(sata_pmp_port_ops);
+EXPORT_SYMBOL_GPL(sata_pmp_qc_defer_cmd_switch);
+EXPORT_SYMBOL_GPL(sata_pmp_error_handler);
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 6b70a624828c..42b30e38495d 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -179,11 +179,6 @@ extern void ata_schedule_scsi_eh(struct Scsi_Host *shost);
 extern void ata_scsi_dev_rescan(struct work_struct *work);
 extern int ata_bus_probe(struct ata_port *ap);
 
-/* libata-pmp.c */
-extern int sata_pmp_scr_read(struct ata_link *link, int reg, u32 *val);
-extern int sata_pmp_scr_write(struct ata_link *link, int reg, u32 val);
-extern int sata_pmp_attach(struct ata_device *dev);
-
 /* libata-eh.c */
 extern enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd);
 extern void ata_scsi_error(struct Scsi_Host *host);
@@ -207,6 +202,11 @@ extern int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
 			  struct ata_link **r_failed_disk);
 extern void ata_eh_finish(struct ata_port *ap);
 
+/* libata-pmp.c */
+extern int sata_pmp_scr_read(struct ata_link *link, int reg, u32 *val);
+extern int sata_pmp_scr_write(struct ata_link *link, int reg, u32 val);
+extern int sata_pmp_attach(struct ata_device *dev);
+
 /* libata-sff.c */
 #ifdef CONFIG_ATA_SFF
 extern void ata_dev_select(struct ata_port *ap, unsigned int device,
-- 
cgit v1.2.2


From 071f44b1d2c051641b62a3571223314737ccbe59 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Mon, 7 Apr 2008 22:47:22 +0900
Subject: libata: implement PMP helpers

Implement helpers to test whether PMP is supported, attached and
determine pmp number to use when issuing SRST to a link.  While at it,
move ata_is_host_link() so that it's together with the two new PMP
helpers.

This change simplifies LLDs and helps making PMP support optional.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/ahci.c        | 30 ++++++------------------------
 drivers/ata/libata-acpi.c |  2 +-
 drivers/ata/libata-core.c |  4 ++--
 drivers/ata/libata-eh.c   | 14 +++++++-------
 drivers/ata/libata-pmp.c  |  6 +++---
 drivers/ata/libata-scsi.c |  6 +++---
 drivers/ata/sata_sil24.c  | 27 +++++++--------------------
 7 files changed, 29 insertions(+), 60 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 6281f7f9eae6..0de6432ee026 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -260,8 +260,6 @@ static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
 static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
 				unsigned long deadline);
 static void ahci_postreset(struct ata_link *link, unsigned int *class);
-static int ahci_pmp_softreset(struct ata_link *link, unsigned int *class,
-			      unsigned long deadline);
 static void ahci_error_handler(struct ata_port *ap);
 static void ahci_post_internal_cmd(struct ata_queued_cmd *qc);
 static int ahci_port_resume(struct ata_port *ap);
@@ -301,7 +299,7 @@ static struct ata_port_operations ahci_ops = {
 	.softreset		= ahci_softreset,
 	.hardreset		= ahci_hardreset,
 	.postreset		= ahci_postreset,
-	.pmp_softreset		= ahci_pmp_softreset,
+	.pmp_softreset		= ahci_softreset,
 	.error_handler		= ahci_error_handler,
 	.post_internal_cmd	= ahci_post_internal_cmd,
 	.dev_config		= ahci_dev_config,
@@ -1263,10 +1261,11 @@ static int ahci_check_ready(struct ata_link *link)
 	return 0;
 }
 
-static int ahci_do_softreset(struct ata_link *link, unsigned int *class,
-			     int pmp, unsigned long deadline)
+static int ahci_softreset(struct ata_link *link, unsigned int *class,
+			  unsigned long deadline)
 {
 	struct ata_port *ap = link->ap;
+	int pmp = sata_srst_pmp(link);
 	const char *reason = NULL;
 	unsigned long now, msecs;
 	struct ata_taskfile tf;
@@ -1326,17 +1325,6 @@ static int ahci_do_softreset(struct ata_link *link, unsigned int *class,
 	return rc;
 }
 
-static int ahci_softreset(struct ata_link *link, unsigned int *class,
-			  unsigned long deadline)
-{
-	int pmp = 0;
-
-	if (link->ap->flags & ATA_FLAG_PMP)
-		pmp = SATA_PMP_CTRL_PORT;
-
-	return ahci_do_softreset(link, class, pmp, deadline);
-}
-
 static int ahci_hardreset(struct ata_link *link, unsigned int *class,
 			  unsigned long deadline)
 {
@@ -1457,12 +1445,6 @@ static void ahci_postreset(struct ata_link *link, unsigned int *class)
 	}
 }
 
-static int ahci_pmp_softreset(struct ata_link *link, unsigned int *class,
-			      unsigned long deadline)
-{
-	return ahci_do_softreset(link, class, link->pmp, deadline);
-}
-
 static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl)
 {
 	struct scatterlist *sg;
@@ -1581,7 +1563,7 @@ static void ahci_error_intr(struct ata_port *ap, u32 irq_stat)
 				  unk[0], unk[1], unk[2], unk[3]);
 	}
 
-	if (ap->nr_pmp_links && (irq_stat & PORT_IRQ_BAD_PMP)) {
+	if (sata_pmp_attached(ap) && (irq_stat & PORT_IRQ_BAD_PMP)) {
 		active_ehi->err_mask |= AC_ERR_HSM;
 		active_ehi->action |= ATA_EH_RESET;
 		ata_ehi_push_desc(active_ehi, "incorrect PMP");
@@ -1847,7 +1829,7 @@ static int ahci_port_resume(struct ata_port *ap)
 	ahci_power_up(ap);
 	ahci_start_port(ap);
 
-	if (ap->nr_pmp_links)
+	if (sata_pmp_attached(ap))
 		ahci_pmp_attach(ap);
 	else
 		ahci_pmp_detach(ap);
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index bf98a566adac..f88a4f940e11 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -77,7 +77,7 @@ void ata_acpi_associate_sata_port(struct ata_port *ap)
 {
 	WARN_ON(!(ap->flags & ATA_FLAG_ACPI_SATA));
 
-	if (!ap->nr_pmp_links) {
+	if (!sata_pmp_attached(ap)) {
 		acpi_integer adr = SATA_ADR(ap->port_no, NO_PORT_MULT);
 
 		ap->link.device->acpi_handle =
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index b2d5d63fb6c9..3401248180c9 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2278,7 +2278,7 @@ int ata_dev_configure(struct ata_device *dev)
 		 * changed notifications and ATAPI ANs.
 		 */
 		if ((ap->flags & ATA_FLAG_AN) && ata_id_has_atapi_AN(id) &&
-		    (!ap->nr_pmp_links ||
+		    (!sata_pmp_attached(ap) ||
 		     sata_scr_read(&ap->link, SCR_NOTIFICATION, &sntf) == 0)) {
 			unsigned int err_mask;
 
@@ -3623,7 +3623,7 @@ int sata_link_hardreset(struct ata_link *link, const unsigned long *timing,
 	if (online)
 		*online = true;
 
-	if ((link->ap->flags & ATA_FLAG_PMP) && ata_is_host_link(link)) {
+	if (sata_pmp_supported(link->ap) && ata_is_host_link(link)) {
 		/* If PMP is supported, we have to do follow-up SRST.
 		 * Some PMPs don't send D2H Reg FIS after hardreset if
 		 * the first port is empty.  Wait only for
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 4ec1397434c0..99f83bdc572b 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -873,9 +873,9 @@ int sata_async_notification(struct ata_port *ap)
 	if (rc == 0)
 		sata_scr_write(&ap->link, SCR_NOTIFICATION, sntf);
 
-	if (!ap->nr_pmp_links || rc) {
+	if (!sata_pmp_attached(ap) || rc) {
 		/* PMP is not attached or SNTF is not available */
-		if (!ap->nr_pmp_links) {
+		if (!sata_pmp_attached(ap)) {
 			/* PMP is not attached.  Check whether ATAPI
 			 * AN is configured.  If so, notify media
 			 * change.
@@ -1853,7 +1853,7 @@ void ata_eh_autopsy(struct ata_port *ap)
 	/* Autopsy of fanout ports can affect host link autopsy.
 	 * Perform host link autopsy last.
 	 */
-	if (ap->nr_pmp_links)
+	if (sata_pmp_attached(ap))
 		ata_eh_link_autopsy(&ap->link);
 }
 
@@ -2076,7 +2076,7 @@ static int ata_eh_followup_srst_needed(struct ata_link *link,
 	}
 	if (rc != 0)
 		return 0;
-	if ((link->ap->flags & ATA_FLAG_PMP) && ata_is_host_link(link))
+	if (sata_pmp_supported(link->ap) && ata_is_host_link(link))
 		return 1;
 	return 0;
 }
@@ -2668,7 +2668,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
 		/* if PMP is attached, this function only deals with
 		 * downstream links, port should stay thawed.
 		 */
-		if (!ap->nr_pmp_links)
+		if (!sata_pmp_attached(ap))
 			ata_eh_freeze_port(ap);
 
 		ata_port_for_each_link(link, ap) {
@@ -2687,7 +2687,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
 			}
 		}
 
-		if (!ap->nr_pmp_links)
+		if (!sata_pmp_attached(ap))
 			ata_eh_thaw_port(ap);
 	}
 
@@ -2731,7 +2731,7 @@ dev_fail:
 			/* PMP reset requires working host port.
 			 * Can't retry if it's frozen.
 			 */
-			if (ap->nr_pmp_links)
+			if (sata_pmp_attached(ap))
 				goto out;
 			break;
 		}
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index bb10c0630791..ff1822a7da38 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -411,7 +411,7 @@ int sata_pmp_attach(struct ata_device *dev)
 	int rc;
 
 	/* is it hanging off the right place? */
-	if (!(ap->flags & ATA_FLAG_PMP)) {
+	if (!sata_pmp_supported(ap)) {
 		ata_dev_printk(dev, KERN_ERR,
 			       "host does not support Port Multiplier\n");
 		return -EINVAL;
@@ -876,7 +876,7 @@ static int sata_pmp_eh_recover(struct ata_port *ap)
 
  retry:
 	/* PMP attached? */
-	if (!ap->nr_pmp_links) {
+	if (!sata_pmp_attached(ap)) {
 		rc = ata_eh_recover(ap, ops->prereset, ops->softreset,
 				    ops->hardreset, ops->postreset, NULL);
 		if (rc) {
@@ -983,7 +983,7 @@ static int sata_pmp_eh_recover(struct ata_port *ap)
 	if (ap->pflags & ATA_PFLAG_UNLOADING)
 		return rc;
 
-	if (!ap->nr_pmp_links)
+	if (!sata_pmp_attached(ap))
 		goto retry;
 
 	if (--pmp_tries) {
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index a70881c408e5..fedf62de9460 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2617,7 +2617,7 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc)
 
 static struct ata_device *ata_find_dev(struct ata_port *ap, int devno)
 {
-	if (ap->nr_pmp_links == 0) {
+	if (!sata_pmp_attached(ap)) {
 		if (likely(devno < ata_link_max_devices(&ap->link)))
 			return &ap->link.device[devno];
 	} else {
@@ -2634,7 +2634,7 @@ static struct ata_device *__ata_scsi_find_dev(struct ata_port *ap,
 	int devno;
 
 	/* skip commands not addressed to targets we simulate */
-	if (ap->nr_pmp_links == 0) {
+	if (!sata_pmp_attached(ap)) {
 		if (unlikely(scsidev->channel || scsidev->lun))
 			return NULL;
 		devno = scsidev->id;
@@ -3492,7 +3492,7 @@ static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel,
 	if (lun != SCAN_WILD_CARD && lun)
 		return -EINVAL;
 
-	if (ap->nr_pmp_links == 0) {
+	if (!sata_pmp_attached(ap)) {
 		if (channel != SCAN_WILD_CARD && channel)
 			return -EINVAL;
 		devno = id;
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 6039614e956c..068789361895 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -354,8 +354,6 @@ static int sil24_softreset(struct ata_link *link, unsigned int *class,
 			   unsigned long deadline);
 static int sil24_hardreset(struct ata_link *link, unsigned int *class,
 			   unsigned long deadline);
-static int sil24_pmp_softreset(struct ata_link *link, unsigned int *class,
-			       unsigned long deadline);
 static int sil24_pmp_hardreset(struct ata_link *link, unsigned int *class,
 			       unsigned long deadline);
 static void sil24_error_handler(struct ata_port *ap);
@@ -408,7 +406,7 @@ static struct ata_port_operations sil24_ops = {
 	.thaw			= sil24_thaw,
 	.softreset		= sil24_softreset,
 	.hardreset		= sil24_hardreset,
-	.pmp_softreset		= sil24_pmp_softreset,
+	.pmp_softreset		= sil24_softreset,
 	.pmp_hardreset		= sil24_pmp_hardreset,
 	.error_handler		= sil24_error_handler,
 	.post_internal_cmd	= sil24_post_internal_cmd,
@@ -588,7 +586,7 @@ static int sil24_init_port(struct ata_port *ap)
 	u32 tmp;
 
 	/* clear PMP error status */
-	if (ap->nr_pmp_links)
+	if (sata_pmp_attached(ap))
 		sil24_clear_pmp(ap);
 
 	writel(PORT_CS_INIT, port + PORT_CTRL_STAT);
@@ -653,10 +651,11 @@ static int sil24_exec_polled_cmd(struct ata_port *ap, int pmp,
 	return rc;
 }
 
-static int sil24_do_softreset(struct ata_link *link, unsigned int *class,
-			      int pmp, unsigned long deadline)
+static int sil24_softreset(struct ata_link *link, unsigned int *class,
+			   unsigned long deadline)
 {
 	struct ata_port *ap = link->ap;
+	int pmp = sata_srst_pmp(link);
 	unsigned long timeout_msec = 0;
 	struct ata_taskfile tf;
 	const char *reason;
@@ -706,12 +705,6 @@ static int sil24_do_softreset(struct ata_link *link, unsigned int *class,
 	return -EIO;
 }
 
-static int sil24_softreset(struct ata_link *link, unsigned int *class,
-			   unsigned long deadline)
-{
-	return sil24_do_softreset(link, class, SATA_PMP_CTRL_PORT, deadline);
-}
-
 static int sil24_hardreset(struct ata_link *link, unsigned int *class,
 			   unsigned long deadline)
 {
@@ -926,12 +919,6 @@ static void sil24_pmp_detach(struct ata_port *ap)
 	sil24_config_pmp(ap, 0);
 }
 
-static int sil24_pmp_softreset(struct ata_link *link, unsigned int *class,
-			       unsigned long deadline)
-{
-	return sil24_do_softreset(link, class, link->pmp, deadline);
-}
-
 static int sil24_pmp_hardreset(struct ata_link *link, unsigned int *class,
 			       unsigned long deadline)
 {
@@ -1034,7 +1021,7 @@ static void sil24_error_intr(struct ata_port *ap)
 		}
 
 		/* find out the offending link and qc */
-		if (ap->nr_pmp_links) {
+		if (sata_pmp_attached(ap)) {
 			context = readl(port + PORT_CONTEXT);
 			pmp = (context >> 5) & 0xf;
 
@@ -1082,7 +1069,7 @@ static void sil24_error_intr(struct ata_port *ap)
 		ehi->action |= action;
 
 		/* if PMP, resume */
-		if (ap->nr_pmp_links)
+		if (sata_pmp_attached(ap))
 			writel(PORT_CS_PMP_RESUME, port + PORT_CTRL_STAT);
 	}
 
-- 
cgit v1.2.2


From 88fcd5627563722483427a55113c0a83f56e8080 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Mon, 7 Apr 2008 22:47:22 +0900
Subject: libata: make PMP support optional

Make PMP support optional by adding CONFIG_SATA_PMP and leaving out
libata-pmp.c if it isn't set.  PMP helpers return constant values if
PMP support is not enabled and PMP declarations alias non-PMP
counterparts.  This makes the compiler to leave out PMP related part
out and LLDs to use non-PMP counterparts automatically.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---
 drivers/ata/Kconfig  |  6 ++++++
 drivers/ata/Makefile |  3 ++-
 drivers/ata/libata.h | 17 +++++++++++++++++
 3 files changed, 25 insertions(+), 1 deletion(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 48c8fc55391e..3eb6035b61b8 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -41,6 +41,12 @@ config ATA_ACPI
 	  You can disable this at kernel boot time by using the
 	  option libata.noacpi=1
 
+config SATA_PMP
+	bool "SATA Port Multiplier support"
+	default y
+	help
+	  This option adds support for SATA Port Multipliers.
+
 config SATA_AHCI
 	tristate "AHCI SATA support"
 	depends on PCI
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index e6e41b2c731c..1fbc2aa648b7 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -78,6 +78,7 @@ obj-$(CONFIG_ATA_GENERIC)	+= ata_generic.o
 # Should be last libata driver
 obj-$(CONFIG_PATA_LEGACY)	+= pata_legacy.o
 
-libata-objs	:= libata-core.o libata-scsi.o libata-eh.o libata-pmp.o
+libata-objs	:= libata-core.o libata-scsi.o libata-eh.o
 libata-$(CONFIG_ATA_SFF)	+= libata-sff.o
+libata-$(CONFIG_SATA_PMP)	+= libata-pmp.o
 libata-$(CONFIG_ATA_ACPI)	+= libata-acpi.o
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 42b30e38495d..4aeeabb10a47 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -203,9 +203,26 @@ extern int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
 extern void ata_eh_finish(struct ata_port *ap);
 
 /* libata-pmp.c */
+#ifdef CONFIG_SATA_PMP
 extern int sata_pmp_scr_read(struct ata_link *link, int reg, u32 *val);
 extern int sata_pmp_scr_write(struct ata_link *link, int reg, u32 val);
 extern int sata_pmp_attach(struct ata_device *dev);
+#else /* CONFIG_SATA_PMP */
+static inline int sata_pmp_scr_read(struct ata_link *link, int reg, u32 *val)
+{
+	return -EINVAL;
+}
+
+static inline int sata_pmp_scr_write(struct ata_link *link, int reg, u32 val)
+{
+	return -EINVAL;
+}
+
+static inline int sata_pmp_attach(struct ata_device *dev)
+{
+	return -EINVAL;
+}
+#endif /* CONFIG_SATA_PMP */
 
 /* libata-sff.c */
 #ifdef CONFIG_ATA_SFF
-- 
cgit v1.2.2


From e50e3ce5e70e36e6069a8cc8292df76058fa9e23 Mon Sep 17 00:00:00 2001
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Wed, 9 Apr 2008 13:34:40 +1000
Subject: pata_scc: fix build breakage

drivers/ata/pata_scc.c: In function 'scc_bus_softreset':
drivers/ata/pata_scc.c:594: error: 'deadlien' undeclared (first use in this function)
drivers/ata/pata_scc.c:594: error: (Each undeclared identifier is reported only once
drivers/ata/pata_scc.c:594: error: for each function it appears in.)

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/pata_scc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index accc275e74cc..7bdea8a4ca7e 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -591,7 +591,7 @@ static unsigned int scc_bus_softreset(struct ata_port *ap, unsigned int devmask,
 	udelay(20);
 	out_be32(ioaddr->ctl_addr, ap->ctl);
 
-	scc_wait_after_reset(&ap->link, devmask, deadlien);
+	scc_wait_after_reset(&ap->link, devmask, deadline);
 
 	return 0;
 }
-- 
cgit v1.2.2


From 2a0c15ca39f5881aa1b472ca856bb7a2e584ece7 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Tue, 8 Apr 2008 01:25:35 +0900
Subject: libata: kill dead code paths in reset path

Some code paths which had been made obsolete by recent reset
simplification were still around.  Kill them.

* ata_eh_reset() checked for ATA_DEV_UNKNOWN to determine
  classification failure.  This is no longer applicable.

* ata_do_reset() should convert ATA_DEV_UNKNOWN to ATA_DEV_NONE
  regardless of reset result (e.g. -EAGAIN).

* LLDs don't need to convert ATA_DEV_UNKNOWN to ATA_DEV_NONE.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/libata-eh.c     | 19 +------------------
 drivers/ata/sata_inic162x.c |  2 --
 drivers/ata/sata_sil24.c    |  3 ---
 3 files changed, 1 insertion(+), 23 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 99f83bdc572b..88cdc4938bea 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2052,15 +2052,13 @@ static int ata_do_reset(struct ata_link *link, ata_reset_fn_t reset,
 		classes[dev->devno] = ATA_DEV_UNKNOWN;
 
 	rc = reset(link, classes, deadline);
-	if (rc)
-		return rc;
 
 	/* convert all ATA_DEV_UNKNOWN to ATA_DEV_NONE */
 	ata_link_for_each_dev(dev, link)
 		if (classes[dev->devno] == ATA_DEV_UNKNOWN)
 			classes[dev->devno] = ATA_DEV_NONE;
 
-	return 0;
+	return rc;
 }
 
 static int ata_eh_followup_srst_needed(struct ata_link *link,
@@ -2209,21 +2207,6 @@ int ata_eh_reset(struct ata_link *link, int classify,
 	if (rc && rc != -EAGAIN)
 		goto fail;
 
-	/* was classification successful? */
-	if (classify && classes[0] == ATA_DEV_UNKNOWN &&
-	    !(lflags & ATA_LFLAG_ASSUME_CLASS)) {
-		if (try < max_tries) {
-			ata_link_printk(link, KERN_WARNING,
-					"classification failed\n");
-			rc = -EINVAL;
-			goto fail;
-		}
-
-		ata_link_printk(link, KERN_WARNING,
-				"classfication failed, assuming ATA\n");
-		lflags |= ATA_LFLAG_ASSUME_ATA;
-	}
-
  done:
 	ata_link_for_each_dev(dev, link) {
 		/* After the reset, the device state is PIO 0 and the
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index 9f47d0022453..d27bb9a2568f 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -428,8 +428,6 @@ static int inic_hardreset(struct ata_link *link, unsigned int *class,
 
 		ata_sff_tf_read(ap, &tf);
 		*class = ata_dev_classify(&tf);
-		if (*class == ATA_DEV_UNKNOWN)
-			*class = ATA_DEV_NONE;
 	}
 
 	return 0;
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 068789361895..20757fa6115d 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -693,9 +693,6 @@ static int sil24_softreset(struct ata_link *link, unsigned int *class,
 	sil24_read_tf(ap, 0, &tf);
 	*class = ata_dev_classify(&tf);
 
-	if (*class == ATA_DEV_UNKNOWN)
-		*class = ATA_DEV_NONE;
-
  out:
 	DPRINTK("EXIT, class=%u\n", *class);
 	return 0;
-- 
cgit v1.2.2


From 45db2f6c95eee7c6622ea1b3edb9abafba58e3ab Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Tue, 8 Apr 2008 01:46:56 +0900
Subject: libata: move link onlineness check out of softreset methods

Currently, SATA softresets should do link onlineness check before
actually performing SRST protocol but it doesn't really belong to
softreset.

This patch moves onlineness check in softreset to ata_eh_reset() and
ata_eh_followup_srst_needed() to clean up code and help future sata_mv
changes which need clear separation between SCR and TF accesses.

sata_fsl is peculiar in that its softreset really isn't softreset but
combination of hardreset and softreset.  This patch adds dummy private
->prereset to keep the current behavior but the driver really should
implement separate hard and soft resets and return -EAGAIN from
hardreset if it should be follwed by softreset.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/ahci.c        |  6 ------
 drivers/ata/libata-core.c |  4 ++++
 drivers/ata/libata-eh.c   |  2 +-
 drivers/ata/libata-sff.c  |  6 ------
 drivers/ata/pata_bf54x.c  |  6 ------
 drivers/ata/pata_scc.c    |  6 ------
 drivers/ata/sata_fsl.c    | 10 ++++++++++
 drivers/ata/sata_sil24.c  |  7 -------
 8 files changed, 15 insertions(+), 32 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 0de6432ee026..739ba3f222e8 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1273,12 +1273,6 @@ static int ahci_softreset(struct ata_link *link, unsigned int *class,
 
 	DPRINTK("ENTER\n");
 
-	if (ata_link_offline(link)) {
-		DPRINTK("PHY reports no device\n");
-		*class = ATA_DEV_NONE;
-		return 0;
-	}
-
 	/* prepare for SRST (AHCI-1.1 10.4.1) */
 	rc = ahci_kick_engine(ap, 1);
 	if (rc && rc != -EOPNOTSUPP)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 3401248180c9..f60988f5e01b 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3541,6 +3541,10 @@ int ata_std_prereset(struct ata_link *link, unsigned long deadline)
 					"link for reset (errno=%d)\n", rc);
 	}
 
+	/* no point in trying softreset on offline link */
+	if (ata_link_offline(link))
+		ehc->i.action &= ~ATA_EH_SOFTRESET;
+
 	return 0;
 }
 
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 88cdc4938bea..ecbb8e90cb8d 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2065,7 +2065,7 @@ static int ata_eh_followup_srst_needed(struct ata_link *link,
 				       int rc, int classify,
 				       const unsigned int *classes)
 {
-	if (link->flags & ATA_LFLAG_NO_SRST)
+	if ((link->flags & ATA_LFLAG_NO_SRST) || ata_link_offline(link))
 		return 0;
 	if (rc == -EAGAIN) {
 		if (classify)
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 8e6c78ac70f8..15499522e642 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -1889,11 +1889,6 @@ int ata_sff_softreset(struct ata_link *link, unsigned int *classes,
 
 	DPRINTK("ENTER\n");
 
-	if (ata_link_offline(link)) {
-		classes[0] = ATA_DEV_NONE;
-		goto out;
-	}
-
 	/* determine if device 0/1 are present */
 	if (ata_devchk(ap, 0))
 		devmask |= (1 << 0);
@@ -1919,7 +1914,6 @@ int ata_sff_softreset(struct ata_link *link, unsigned int *classes,
 		classes[1] = ata_sff_dev_classify(&link->device[1],
 						  devmask & (1 << 1), &err);
 
- out:
 	DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]);
 	return 0;
 }
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index d98bd7455e6b..0a5ad98635b1 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -1103,11 +1103,6 @@ static int bfin_softreset(struct ata_link *link, unsigned int *classes,
 	unsigned int devmask = 0, err_mask;
 	u8 err;
 
-	if (ata_link_offline(link)) {
-		classes[0] = ATA_DEV_NONE;
-		goto out;
-	}
-
 	/* determine if device 0/1 are present */
 	if (bfin_devchk(ap, 0))
 		devmask |= (1 << 0);
@@ -1132,7 +1127,6 @@ static int bfin_softreset(struct ata_link *link, unsigned int *classes,
 		classes[1] = ata_sff_dev_classify(&ap->link.device[1],
 					devmask & (1 << 1), &err);
 
- out:
 	return 0;
 }
 
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index 7bdea8a4ca7e..e965b251ca24 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -615,11 +615,6 @@ static int scc_softreset(struct ata_link *link, unsigned int *classes,
 
 	DPRINTK("ENTER\n");
 
-	if (ata_link_offline(link)) {
-		classes[0] = ATA_DEV_NONE;
-		goto out;
-	}
-
 	/* determine if device 0/1 are present */
 	if (scc_devchk(ap, 0))
 		devmask |= (1 << 0);
@@ -645,7 +640,6 @@ static int scc_softreset(struct ata_link *link, unsigned int *classes,
 		classes[1] = ata_sff_dev_classify(&ap->link.device[1],
 						  devmask & (1 << 1), &err);
 
- out:
 	DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]);
 	return 0;
 }
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 9c4e6a6698c2..fddd346b1d57 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -678,6 +678,15 @@ static unsigned int sata_fsl_dev_classify(struct ata_port *ap)
 	return ata_dev_classify(&tf);
 }
 
+static int sata_fsl_prereset(struct ata_linke *link, unsigned long deadline)
+{
+	/* FIXME: Never skip softreset, sata_fsl_softreset() is
+	 * combination of soft and hard resets.  sata_fsl_softreset()
+	 * needs to be splitted into soft and hard resets.
+	 */
+	return 0;
+}
+
 static int sata_fsl_softreset(struct ata_link *link, unsigned int *class,
 			      unsigned long deadline)
 {
@@ -1157,6 +1166,7 @@ static const struct ata_port_operations sata_fsl_ops = {
 
 	.freeze = sata_fsl_freeze,
 	.thaw = sata_fsl_thaw,
+	.prereset = sata_fsl_prereset,
 	.softreset = sata_fsl_softreset,
 	.post_internal_cmd = sata_fsl_post_internal_cmd,
 
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 20757fa6115d..27a110110077 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -663,12 +663,6 @@ static int sil24_softreset(struct ata_link *link, unsigned int *class,
 
 	DPRINTK("ENTER\n");
 
-	if (ata_link_offline(link)) {
-		DPRINTK("PHY reports no device\n");
-		*class = ATA_DEV_NONE;
-		goto out;
-	}
-
 	/* put the port into known state */
 	if (sil24_init_port(ap)) {
 		reason = "port not ready";
@@ -693,7 +687,6 @@ static int sil24_softreset(struct ata_link *link, unsigned int *class,
 	sil24_read_tf(ap, 0, &tf);
 	*class = ata_dev_classify(&tf);
 
- out:
 	DPRINTK("EXIT, class=%u\n", *class);
 	return 0;
 
-- 
cgit v1.2.2


From f792068e43a3a156139569304b29ec8fc5dec4e3 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Tue, 8 Apr 2008 16:37:50 +0100
Subject: libata: cable logic

The cable detect isolation patch inadvertently removed 40 wire short
cable handling. Put it back

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/libata-core.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'drivers/ata')

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index f60988f5e01b..2556ea29defb 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4033,6 +4033,10 @@ static int cable_is_40wire(struct ata_port *ap)
 	/* If the controller thinks we are 80 wire, we are */
 	if (ap->cbl == ATA_CBL_PATA80 || ap->cbl == ATA_CBL_SATA)
 		return 0;
+	/* If the system is known to be 40 wire short cable (eg laptop),
+	   then we allow 80 wire modes even if the drive isn't sure */
+	if (ap->cbl == ATA_CBL_PATA40_SHORT)
+		return 0;
 	/* If the controller doesn't know we scan
 
 	   - Note: We look for all 40 wire detects at this point.
-- 
cgit v1.2.2


From b93fda12357b3f1aa55cf69d8e088372788ea9ea Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Tue, 8 Apr 2008 16:36:44 +0100
Subject: libata: Be a bit more slack about early devices

We have a certain number of 'ATA' emulations often on CF or other flash
devices that are at best "loosely based" on the CF 1.1 standard. These
devices report themselves as disk but don't support the ATA minimal
command set only the CF 1.1 set.

Relax the PIO checking for devices reporting ATA rev 0, or no iordy
support, or CFA. Rework the code a bit as it was already messy and this
made it quite ugly.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/libata-core.c | 25 +++++++++++++++----------
 1 file changed, 15 insertions(+), 10 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 2556ea29defb..733eb94d055e 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3132,16 +3132,21 @@ static int ata_dev_set_mode(struct ata_device *dev)
 	if (rc)
 		return rc;
 
-	/* Old CFA may refuse this command, which is just fine */
-	if (dev->xfer_shift == ATA_SHIFT_PIO && ata_id_is_cfa(dev->id))
-		ign_dev_err = 1;
-
-	/* Some very old devices and some bad newer ones fail any kind of
-	   SET_XFERMODE request but support PIO0-2 timings and no IORDY */
-	if (dev->xfer_shift == ATA_SHIFT_PIO && !ata_id_has_iordy(dev->id) &&
-			dev->pio_mode <= XFER_PIO_2)
-		ign_dev_err = 1;
-
+	if (dev->xfer_shift == ATA_SHIFT_PIO) {
+		/* Old CFA may refuse this command, which is just fine */
+		if (ata_id_is_cfa(dev->id))
+			ign_dev_err = 1;
+		/* Catch several broken garbage emulations plus some pre
+		   ATA devices */
+		if (ata_id_major_version(dev->id) == 0 &&
+					dev->pio_mode <= XFER_PIO_2)
+			ign_dev_err = 1;
+		/* Some very old devices and some bad newer ones fail
+		   any kind of SET_XFERMODE request but support PIO0-2
+		   timings and no IORDY */
+		if (!ata_id_has_iordy(dev->id) && dev->pio_mode <= XFER_PIO_2)
+			ign_dev_err = 1;
+	}
 	/* Early MWDMA devices do DMA but don't allow DMA mode setting.
 	   Don't fail an MWDMA0 set IFF the device indicates it is in MWDMA0 */
 	if (dev->xfer_shift == ATA_SHIFT_MWDMA &&
-- 
cgit v1.2.2


From 4f7faa3f2b99f8fb246c8cdeef971e55ceda4e52 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Wed, 30 Jan 2008 18:18:26 +0900
Subject: libata: make EH fail gracefully if no reset method is available

When no reset method is available, libata currently oopses.  Although
the condition can't happen unless there's a bug in a low level driver,
oopsing isn't the best way to report the error condition.  Complain,
dump stack and fail reset instead.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/libata-eh.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index ecbb8e90cb8d..d94359a24d41 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2137,9 +2137,14 @@ int ata_eh_reset(struct ata_link *link, int classify,
 	if (hardreset) {
 		reset = hardreset;
 		ehc->i.action = ATA_EH_HARDRESET;
-	} else {
+	} else if (softreset) {
 		reset = softreset;
 		ehc->i.action = ATA_EH_SOFTRESET;
+	} else {
+		ata_link_printk(link, KERN_ERR, "BUG: no reset method, "
+				"please report to linux-ide@vger.kernel.org\n");
+		dump_stack();
+		return -EINVAL;
 	}
 
 	if (prereset) {
-- 
cgit v1.2.2


From f3360ebffae254ab99a64bf97c7b4f8380b1e114 Mon Sep 17 00:00:00 2001
From: Jeff Garzik <jeff@garzik.org>
Date: Thu, 17 Apr 2008 15:55:24 -0400
Subject: [libata] improve Kconfig help text for new PMP, SFF options

---
 drivers/ata/Kconfig | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 3eb6035b61b8..292aa9a0f02f 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -45,7 +45,8 @@ config SATA_PMP
 	bool "SATA Port Multiplier support"
 	default y
 	help
-	  This option adds support for SATA Port Multipliers.
+	  This option adds support for SATA Port Multipliers
+	  (the SATA version of an ethernet hub, or SAS expander).
 
 config SATA_AHCI
 	tristate "AHCI SATA support"
@@ -79,6 +80,17 @@ config ATA_SFF
 	  This option adds support for ATA controllers with SFF
 	  compliant or similar programming interface.
 
+	  SFF is the legacy IDE interface that has been around since
+	  the dawn of time.  Almost all PATA controllers have an
+	  SFF interface.  Many SATA controllers have an SFF interface
+	  when configured into a legacy compatibility mode.
+
+	  For users with exclusively modern controllers like AHCI,
+	  Silicon Image 3124, or Marvell 6440, you may choose to
+	  disable this uneeded SFF support.
+
+	  If unsure, say Y.
+
 if ATA_SFF
 
 config SATA_SVW
-- 
cgit v1.2.2


From 0d8be5cbff8fd95da72d749a64e150b851f470c6 Mon Sep 17 00:00:00 2001
From: Mark Lord <liml@rtr.ca>
Date: Wed, 16 Apr 2008 14:56:12 -0400
Subject: sata_mv hardreset rework

Rework and simplify sata_mv's hardreset code to take advantage of
libata improvements since it was first coded.

Also, get rid of the now unnecessary prereset, postreset, and phy_reset
functions.

This patch also paves the way for subsequent pmp support patches,
which will follow once this one passes muster.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/sata_mv.c | 160 +++++++-------------------------------------------
 1 file changed, 22 insertions(+), 138 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index fa75df634c75..3e2f779ae9c6 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -478,10 +478,8 @@ static void mv_port_stop(struct ata_port *ap);
 static void mv_qc_prep(struct ata_queued_cmd *qc);
 static void mv_qc_prep_iie(struct ata_queued_cmd *qc);
 static unsigned int mv_qc_issue(struct ata_queued_cmd *qc);
-static int mv_prereset(struct ata_link *link, unsigned long deadline);
 static int mv_hardreset(struct ata_link *link, unsigned int *class,
 			unsigned long deadline);
-static void mv_postreset(struct ata_link *link, unsigned int *classes);
 static void mv_eh_freeze(struct ata_port *ap);
 static void mv_eh_thaw(struct ata_port *ap);
 static void mv6_dev_config(struct ata_device *dev);
@@ -545,9 +543,7 @@ static struct ata_port_operations mv5_ops = {
 
 	.freeze			= mv_eh_freeze,
 	.thaw			= mv_eh_thaw,
-	.prereset		= mv_prereset,
 	.hardreset		= mv_hardreset,
-	.postreset		= mv_postreset,
 	.error_handler		= ata_std_error_handler, /* avoid SFF EH */
 	.post_internal_cmd	= ATA_OP_NULL,
 
@@ -1904,7 +1900,6 @@ static void mv5_reset_hc_port(struct mv_host_priv *hpriv, void __iomem *mmio,
 	 * (but doesn't say what the problem might be).  So we first try
 	 * to disable the EDMA engine before doing the ATA_RST operation.
 	 */
-	mv_stop_edma_engine(port_mmio);
 	mv_reset_channel(hpriv, mmio, port);
 
 	ZERO(0x028);	/* command */
@@ -2184,7 +2179,6 @@ static void mv_soc_reset_hc_port(struct mv_host_priv *hpriv,
 	 * (but doesn't say what the problem might be).  So we first try
 	 * to disable the EDMA engine before doing the ATA_RST operation.
 	 */
-	mv_stop_edma_engine(port_mmio);
 	mv_reset_channel(hpriv, mmio, port);
 
 	ZERO(0x028);		/* command */
@@ -2261,6 +2255,7 @@ static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio,
 {
 	void __iomem *port_mmio = mv_port_base(mmio, port_no);
 
+	mv_stop_edma_engine(port_mmio);
 	writelfl(ATA_RST, port_mmio + EDMA_CMD_OFS);
 
 	if (!IS_GEN_I(hpriv)) {
@@ -2282,116 +2277,6 @@ static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio,
 		mdelay(1);
 }
 
-/**
- *      mv_phy_reset - Perform eDMA reset followed by COMRESET
- *      @ap: ATA channel to manipulate
- *
- *      Part of this is taken from __sata_phy_reset and modified to
- *      not sleep since this routine gets called from interrupt level.
- *
- *      LOCKING:
- *      Inherited from caller.  This is coded to safe to call at
- *      interrupt level, i.e. it does not sleep.
- */
-static void mv_phy_reset(struct ata_port *ap, unsigned int *class,
-			 unsigned long deadline)
-{
-	struct mv_port_priv *pp	= ap->private_data;
-	struct mv_host_priv *hpriv = ap->host->private_data;
-	void __iomem *port_mmio = mv_ap_base(ap);
-	int retry = 5;
-	u32 sstatus;
-
-	VPRINTK("ENTER, port %u, mmio 0x%p\n", ap->port_no, port_mmio);
-
-#ifdef DEBUG
-	{
-		u32 sstatus, serror, scontrol;
-
-		mv_scr_read(ap, SCR_STATUS, &sstatus);
-		mv_scr_read(ap, SCR_ERROR, &serror);
-		mv_scr_read(ap, SCR_CONTROL, &scontrol);
-		DPRINTK("S-regs after ATA_RST: SStat 0x%08x SErr 0x%08x "
-			"SCtrl 0x%08x\n", sstatus, serror, scontrol);
-	}
-#endif
-
-	/* Issue COMRESET via SControl */
-comreset_retry:
-	sata_scr_write_flush(&ap->link, SCR_CONTROL, 0x301);
-	msleep(1);
-
-	sata_scr_write_flush(&ap->link, SCR_CONTROL, 0x300);
-	msleep(20);
-
-	do {
-		sata_scr_read(&ap->link, SCR_STATUS, &sstatus);
-		if (((sstatus & 0x3) == 3) || ((sstatus & 0x3) == 0))
-			break;
-
-		msleep(1);
-	} while (time_before(jiffies, deadline));
-
-	/* work around errata */
-	if (IS_GEN_II(hpriv) &&
-	    (sstatus != 0x0) && (sstatus != 0x113) && (sstatus != 0x123) &&
-	    (retry-- > 0))
-		goto comreset_retry;
-
-#ifdef DEBUG
-	{
-		u32 sstatus, serror, scontrol;
-
-		mv_scr_read(ap, SCR_STATUS, &sstatus);
-		mv_scr_read(ap, SCR_ERROR, &serror);
-		mv_scr_read(ap, SCR_CONTROL, &scontrol);
-		DPRINTK("S-regs after PHY wake: SStat 0x%08x SErr 0x%08x "
-			"SCtrl 0x%08x\n", sstatus, serror, scontrol);
-	}
-#endif
-
-	if (ata_link_offline(&ap->link)) {
-		*class = ATA_DEV_NONE;
-		return;
-	}
-
-	/* even after SStatus reflects that device is ready,
-	 * it seems to take a while for link to be fully
-	 * established (and thus Status no longer 0x80/0x7F),
-	 * so we poll a bit for that, here.
-	 */
-	retry = 20;
-	while (1) {
-		u8 drv_stat = ata_sff_check_status(ap);
-		if ((drv_stat != 0x80) && (drv_stat != 0x7f))
-			break;
-		msleep(500);
-		if (retry-- <= 0)
-			break;
-		if (time_after(jiffies, deadline))
-			break;
-	}
-
-	/* FIXME: if we passed the deadline, the following
-	 * code probably produces an invalid result
-	 */
-
-	/* finally, read device signature from TF registers */
-	*class = ata_sff_dev_classify(ap->link.device, 1, NULL);
-
-	writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
-
-	WARN_ON(pp->pp_flags & MV_PP_FLAG_EDMA_EN);
-
-	VPRINTK("EXIT\n");
-}
-
-static int mv_prereset(struct ata_link *link, unsigned long deadline)
-{
-	mv_stop_edma(link->ap);
-	return 0;
-}
-
 static int mv_hardreset(struct ata_link *link, unsigned int *class,
 			unsigned long deadline)
 {
@@ -2399,34 +2284,33 @@ static int mv_hardreset(struct ata_link *link, unsigned int *class,
 	struct mv_host_priv *hpriv = ap->host->private_data;
 	struct mv_port_priv *pp = ap->private_data;
 	void __iomem *mmio = hpriv->base;
+	int rc, attempts = 0, extra = 0;
+	u32 sstatus;
+	bool online;
 
 	mv_reset_channel(hpriv, mmio, ap->port_no);
 	pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
-	mv_phy_reset(ap, class, deadline);
-
-	return 0;
-}
-
-static void mv_postreset(struct ata_link *link, unsigned int *classes)
-{
-	struct ata_port *ap = link->ap;
-	u32 serr;
 
-	/* print link status */
-	sata_print_link_status(link);
-
-	/* clear SError */
-	sata_scr_read(link, SCR_ERROR, &serr);
-	sata_scr_write_flush(link, SCR_ERROR, serr);
+	/* Workaround for errata FEr SATA#10 (part 2) */
+	do {
+		const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
 
-	/* bail out if no device is present */
-	if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) {
-		DPRINTK("EXIT, no device\n");
-		return;
-	}
+		rc = sata_link_hardreset(link, timing, deadline + extra, &online, NULL);
+		if (rc) {
+			ata_link_printk(link, KERN_ERR,
+					"COMRESET failed (errno=%d)\n", rc);
+			return rc;
+		}
+		sata_scr_read(link, SCR_STATUS, &sstatus);
+		if (!IS_GEN_I(hpriv) && ++attempts >= 5 && sstatus == 0x121) {
+			/* Force 1.5gb/s link speed and try again */
+			mv_setup_ifctl(mv_ap_base(ap), 0);
+			if (time_after(jiffies + HZ, deadline))
+				extra = HZ; /* only extend it once, max */
+		}
+	} while (sstatus != 0x0 && sstatus != 0x113 && sstatus != 0x123);
 
-	/* set up device control */
-	iowrite8(ap->ctl, ap->ioaddr.ctl_addr);
+	return online ? -EAGAIN : rc;
 }
 
 static void mv_eh_freeze(struct ata_port *ap)
-- 
cgit v1.2.2


From 17c5aab5b34e351531466e35b154ca86db7d46a9 Mon Sep 17 00:00:00 2001
From: Mark Lord <liml@rtr.ca>
Date: Wed, 16 Apr 2008 14:56:51 -0400
Subject: sata_mv cosmetics

More cosmetic cleanups to unclutter the changes needed for PMP support.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/sata_mv.c | 32 +++++++++++++++++++-------------
 1 file changed, 19 insertions(+), 13 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 3e2f779ae9c6..89a798221a6c 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -224,14 +224,20 @@ enum {
 	SATA_STATUS_OFS		= 0x300,  /* ctrl, err regs follow status */
 	SATA_ACTIVE_OFS		= 0x350,
 	SATA_FIS_IRQ_CAUSE_OFS	= 0x364,
+
 	LTMODE_OFS		= 0x30c,
+	LTMODE_BIT8		= (1 << 8),	/* unknown, but necessary */
+
 	PHY_MODE3		= 0x310,
 	PHY_MODE4		= 0x314,
 	PHY_MODE2		= 0x330,
 	SATA_IFCTL_OFS		= 0x344,
 	SATA_IFSTAT_OFS		= 0x34c,
 	VENDOR_UNIQUE_FIS_OFS	= 0x35c,
+
 	FIS_CFG_OFS		= 0x360,
+	FIS_CFG_SINGLE_SYNC	= (1 << 16),	/* SYNC on DMA activation */
+
 	MV5_PHY_MODE		= 0x74,
 	MV5_LT_MODE		= 0x30,
 	MV5_PHY_CTL		= 0x0C,
@@ -616,10 +622,10 @@ static const struct ata_port_info mv_port_info[] = {
 		.port_ops	= &mv_iie_ops,
 	},
 	{  /* chip_soc */
-		.flags = MV_COMMON_FLAGS | MV_FLAG_SOC,
-		.pio_mask = 0x1f,      /* pio0-4 */
-		.udma_mask = ATA_UDMA6,
-		.port_ops = &mv_iie_ops,
+		.flags		= MV_COMMON_FLAGS | MV_FLAG_SOC,
+		.pio_mask	= 0x1f,	/* pio0-4 */
+		.udma_mask	= ATA_UDMA6,
+		.port_ops	= &mv_iie_ops,
 	},
 };
 
@@ -1377,7 +1383,8 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)
 
 	if ((qc->tf.protocol != ATA_PROT_DMA) &&
 	    (qc->tf.protocol != ATA_PROT_NCQ)) {
-		/* We're about to send a non-EDMA capable command to the
+		/*
+		 * We're about to send a non-EDMA capable command to the
 		 * port.  Turn off EDMA so there won't be problems accessing
 		 * shadow block, etc registers.
 		 */
@@ -2293,14 +2300,13 @@ static int mv_hardreset(struct ata_link *link, unsigned int *class,
 
 	/* Workaround for errata FEr SATA#10 (part 2) */
 	do {
-		const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
+		const unsigned long *timing =
+				sata_ehc_deb_timing(&link->eh_context);
 
-		rc = sata_link_hardreset(link, timing, deadline + extra, &online, NULL);
-		if (rc) {
-			ata_link_printk(link, KERN_ERR,
-					"COMRESET failed (errno=%d)\n", rc);
+		rc = sata_link_hardreset(link, timing, deadline + extra,
+					 &online, NULL);
+		if (rc)
 			return rc;
-		}
 		sata_scr_read(link, SCR_STATUS, &sstatus);
 		if (!IS_GEN_I(hpriv) && ++attempts >= 5 && sstatus == 0x121) {
 			/* Force 1.5gb/s link speed and try again */
@@ -2310,7 +2316,7 @@ static int mv_hardreset(struct ata_link *link, unsigned int *class,
 		}
 	} while (sstatus != 0x0 && sstatus != 0x113 && sstatus != 0x123);
 
-	return online ? -EAGAIN : rc;
+	return rc;
 }
 
 static void mv_eh_freeze(struct ata_port *ap)
@@ -2975,7 +2981,7 @@ MODULE_DESCRIPTION("SCSI low-level driver for Marvell SATA controllers");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, mv_pci_tbl);
 MODULE_VERSION(DRV_VERSION);
-MODULE_ALIAS("platform:sata_mv");
+MODULE_ALIAS("platform:" DRV_NAME);
 
 #ifdef CONFIG_PCI
 module_param(msi, int, 0444);
-- 
cgit v1.2.2


From 40f0bc2d77d2d9ead3812f4eec2eefc11455e5de Mon Sep 17 00:00:00 2001
From: Mark Lord <liml@rtr.ca>
Date: Wed, 16 Apr 2008 14:57:25 -0400
Subject: sata_mv disable hotplug for now

Disable hot plug/unplug detection in sata_mv for now.
It is currently broken, and also interferes with PMP support.

This will get fixed in a subsequent patch series.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/sata_mv.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 89a798221a6c..162260d6fe19 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -42,6 +42,8 @@
 
   6) Add port multiplier support (intermediate)
 
+  7) Fix/reenable hot plug/unplug (should happen as a side-effect of (2) above).
+
   8) Develop a low-power-consumption strategy, and implement it.
 
   9) [Experiment, low priority] See if ATAPI can be supported using
@@ -296,7 +298,9 @@ enum {
 	EDMA_ERR_IRQ_TRANSIENT  = EDMA_ERR_LNK_CTRL_RX_0 |
 				  EDMA_ERR_LNK_CTRL_RX_1 |
 				  EDMA_ERR_LNK_CTRL_RX_3 |
-				  EDMA_ERR_LNK_CTRL_TX,
+				  EDMA_ERR_LNK_CTRL_TX |
+				 /* temporary, until we fix hotplug: */
+				 (EDMA_ERR_DEV_DCON | EDMA_ERR_DEV_CON),
 
 	EDMA_EH_FREEZE		= EDMA_ERR_D_PAR |
 				  EDMA_ERR_PRD_PAR |
-- 
cgit v1.2.2


From 02c1f32f1c524d2a389989f2482121f7c7d9b164 Mon Sep 17 00:00:00 2001
From: Mark Lord <liml@rtr.ca>
Date: Wed, 16 Apr 2008 14:58:13 -0400
Subject: sata_mv fix SOC flags, enable NCQ on SOC

The System-On-Chip (SOC) core supports all of the same
features as the other recent Marvell chips,
including NCQ and IRQ coalescing.

Fix the chip_soc flags to enable these capabilities
(note that the driver currently does nothing special
for IRQ coalescing, though).

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/sata_mv.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 162260d6fe19..6a7420546609 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -626,7 +626,8 @@ static const struct ata_port_info mv_port_info[] = {
 		.port_ops	= &mv_iie_ops,
 	},
 	{  /* chip_soc */
-		.flags		= MV_COMMON_FLAGS | MV_FLAG_SOC,
+		.flags		= MV_COMMON_FLAGS | MV_6XXX_FLAGS |
+				  ATA_FLAG_NCQ | MV_FLAG_SOC,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &mv_iie_ops,
-- 
cgit v1.2.2


From e49856d82a887ce365637176f9f99ab68076eae8 Mon Sep 17 00:00:00 2001
From: Mark Lord <liml@rtr.ca>
Date: Wed, 16 Apr 2008 14:59:07 -0400
Subject: sata_mv add basic port multiplier support

Add basic port-multiplier support to sata_mv.
This works in Command-based-switching mode for Gen-II chipsets,
and in FIS-based-switching mode for Gen-IIe chipsets.

Error handling remains at the primary port level for now
(works okay, but not great).  This will get fixed in a subsequent
patch series for IRQ/EH handling fixes.  There are also some
known NCQ/PMP errata to be dealt with in the near future,
once we have this basic PMP support in place.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/sata_mv.c | 93 ++++++++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 89 insertions(+), 4 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 6a7420546609..b822b8a40c65 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -40,7 +40,7 @@
 
   5) Investigate problems with PCI Message Signalled Interrupts (MSI).
 
-  6) Add port multiplier support (intermediate)
+  6) Cache frequently-accessed registers in mv_port_priv to reduce overhead.
 
   7) Fix/reenable hot plug/unplug (should happen as a side-effect of (2) above).
 
@@ -528,6 +528,12 @@ static int mv_stop_edma(struct ata_port *ap);
 static int mv_stop_edma_engine(void __iomem *port_mmio);
 static void mv_edma_cfg(struct ata_port *ap, int want_ncq);
 
+static void mv_pmp_select(struct ata_port *ap, int pmp);
+static int mv_pmp_hardreset(struct ata_link *link, unsigned int *class,
+				unsigned long deadline);
+static int  mv_softreset(struct ata_link *link, unsigned int *class,
+				unsigned long deadline);
+
 /* .sg_tablesize is (MV_MAX_SG_CT / 2) in the structures below
  * because we have to allow room for worst case splitting of
  * PRDs for 64K boundaries in mv_fill_sg().
@@ -566,14 +572,20 @@ static struct ata_port_operations mv5_ops = {
 
 static struct ata_port_operations mv6_ops = {
 	.inherits		= &mv5_ops,
-	.qc_defer		= ata_std_qc_defer,
+	.qc_defer		= sata_pmp_qc_defer_cmd_switch,
 	.dev_config             = mv6_dev_config,
 	.scr_read		= mv_scr_read,
 	.scr_write		= mv_scr_write,
+
+	.pmp_hardreset		= mv_pmp_hardreset,
+	.pmp_softreset		= mv_softreset,
+	.softreset		= mv_softreset,
+	.error_handler		= sata_pmp_error_handler,
 };
 
 static struct ata_port_operations mv_iie_ops = {
 	.inherits		= &mv6_ops,
+	.qc_defer		= ata_std_qc_defer, /* FIS-based switching */
 	.dev_config		= ATA_OP_NULL,
 	.qc_prep		= mv_qc_prep_iie,
 };
@@ -599,6 +611,7 @@ static const struct ata_port_info mv_port_info[] = {
 	},
 	{  /* chip_604x */
 		.flags		= MV_COMMON_FLAGS | MV_6XXX_FLAGS |
+				  ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
 				  ATA_FLAG_NCQ,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.udma_mask	= ATA_UDMA6,
@@ -606,6 +619,7 @@ static const struct ata_port_info mv_port_info[] = {
 	},
 	{  /* chip_608x */
 		.flags		= MV_COMMON_FLAGS | MV_6XXX_FLAGS |
+				  ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
 				  ATA_FLAG_NCQ | MV_FLAG_DUAL_HC,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.udma_mask	= ATA_UDMA6,
@@ -613,6 +627,7 @@ static const struct ata_port_info mv_port_info[] = {
 	},
 	{  /* chip_6042 */
 		.flags		= MV_COMMON_FLAGS | MV_6XXX_FLAGS |
+				  ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
 				  ATA_FLAG_NCQ,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.udma_mask	= ATA_UDMA6,
@@ -620,6 +635,7 @@ static const struct ata_port_info mv_port_info[] = {
 	},
 	{  /* chip_7042 */
 		.flags		= MV_COMMON_FLAGS | MV_6XXX_FLAGS |
+				  ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
 				  ATA_FLAG_NCQ,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.udma_mask	= ATA_UDMA6,
@@ -627,6 +643,7 @@ static const struct ata_port_info mv_port_info[] = {
 	},
 	{  /* chip_soc */
 		.flags		= MV_COMMON_FLAGS | MV_6XXX_FLAGS |
+				  ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
 				  ATA_FLAG_NCQ | MV_FLAG_SOC,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.udma_mask	= ATA_UDMA6,
@@ -1006,12 +1023,42 @@ static int mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val)
 static void mv6_dev_config(struct ata_device *adev)
 {
 	/*
+	 * Deal with Gen-II ("mv6") hardware quirks/restrictions:
+	 *
+	 * Gen-II does not support NCQ over a port multiplier
+	 *  (no FIS-based switching).
+	 *
 	 * We don't have hob_nsect when doing NCQ commands on Gen-II.
 	 * See mv_qc_prep() for more info.
 	 */
-	if (adev->flags & ATA_DFLAG_NCQ)
-		if (adev->max_sectors > ATA_MAX_SECTORS)
+	if (adev->flags & ATA_DFLAG_NCQ) {
+		if (sata_pmp_attached(adev->link->ap))
+			adev->flags &= ~ATA_DFLAG_NCQ;
+		else if (adev->max_sectors > ATA_MAX_SECTORS)
 			adev->max_sectors = ATA_MAX_SECTORS;
+	}
+}
+
+static void mv_config_fbs(void __iomem *port_mmio, int enable_fbs)
+{
+	u32 old_fcfg, new_fcfg, old_ltmode, new_ltmode;
+	/*
+	 * Various bit settings required for operation
+	 * in FIS-based switching (fbs) mode on GenIIe:
+	 */
+	old_fcfg   = readl(port_mmio + FIS_CFG_OFS);
+	old_ltmode = readl(port_mmio + LTMODE_OFS);
+	if (enable_fbs) {
+		new_fcfg   = old_fcfg   |  FIS_CFG_SINGLE_SYNC;
+		new_ltmode = old_ltmode |  LTMODE_BIT8;
+	} else { /* disable fbs */
+		new_fcfg   = old_fcfg   & ~FIS_CFG_SINGLE_SYNC;
+		new_ltmode = old_ltmode & ~LTMODE_BIT8;
+	}
+	if (new_fcfg != old_fcfg)
+		writelfl(new_fcfg, port_mmio + FIS_CFG_OFS);
+	if (new_ltmode != old_ltmode)
+		writelfl(new_ltmode, port_mmio + LTMODE_OFS);
 }
 
 static void mv_edma_cfg(struct ata_port *ap, int want_ncq)
@@ -1035,6 +1082,13 @@ static void mv_edma_cfg(struct ata_port *ap, int want_ncq)
 		cfg |= (1 << 22);	/* enab 4-entry host queue cache */
 		cfg |= (1 << 18);	/* enab early completion */
 		cfg |= (1 << 17);	/* enab cut-through (dis stor&forwrd) */
+
+		if (want_ncq && sata_pmp_attached(ap)) {
+			cfg |= EDMA_CFG_EDMA_FBS; /* FIS-based switching */
+			mv_config_fbs(port_mmio, 1);
+		} else {
+			mv_config_fbs(port_mmio, 0);
+		}
 	}
 
 	if (want_ncq) {
@@ -1240,6 +1294,7 @@ static void mv_qc_prep(struct ata_queued_cmd *qc)
 		flags |= CRQB_FLAG_READ;
 	WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
 	flags |= qc->tag << CRQB_TAG_SHIFT;
+	flags |= (qc->dev->link->pmp & 0xf) << CRQB_PMP_SHIFT;
 
 	/* get current queue index from software */
 	in_index = pp->req_idx & MV_MAX_Q_DEPTH_MASK;
@@ -1331,6 +1386,7 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc)
 	WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
 	flags |= qc->tag << CRQB_TAG_SHIFT;
 	flags |= qc->tag << CRQB_HOSTQ_SHIFT;
+	flags |= (qc->dev->link->pmp & 0xf) << CRQB_PMP_SHIFT;
 
 	/* get current queue index from software */
 	in_index = pp->req_idx & MV_MAX_Q_DEPTH_MASK;
@@ -1394,6 +1450,7 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)
 		 * shadow block, etc registers.
 		 */
 		mv_stop_edma(ap);
+		mv_pmp_select(ap, qc->dev->link->pmp);
 		return ata_sff_qc_issue(qc);
 	}
 
@@ -2289,6 +2346,34 @@ static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio,
 		mdelay(1);
 }
 
+static void mv_pmp_select(struct ata_port *ap, int pmp)
+{
+	if (sata_pmp_supported(ap)) {
+		void __iomem *port_mmio = mv_ap_base(ap);
+		u32 reg = readl(port_mmio + SATA_IFCTL_OFS);
+		int old = reg & 0xf;
+
+		if (old != pmp) {
+			reg = (reg & ~0xf) | pmp;
+			writelfl(reg, port_mmio + SATA_IFCTL_OFS);
+		}
+	}
+}
+
+static int mv_pmp_hardreset(struct ata_link *link, unsigned int *class,
+				unsigned long deadline)
+{
+	mv_pmp_select(link->ap, sata_srst_pmp(link));
+	return sata_std_hardreset(link, class, deadline);
+}
+
+static int mv_softreset(struct ata_link *link, unsigned int *class,
+				unsigned long deadline)
+{
+	mv_pmp_select(link->ap, sata_srst_pmp(link));
+	return ata_sff_softreset(link, class, deadline);
+}
+
 static int mv_hardreset(struct ata_link *link, unsigned int *class,
 			unsigned long deadline)
 {
-- 
cgit v1.2.2


From 8a74f1a4680614dfb77fc5dfd37d0ece13b2b357 Mon Sep 17 00:00:00 2001
From: Mark Lord <liml@rtr.ca>
Date: Wed, 16 Apr 2008 15:00:17 -0400
Subject: sata_mv remove redundant edma init code

Remove unnecessary edma init code from port_start.
This sequence gets done later on the first I/O to the port.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/sata_mv.c | 14 --------------
 1 file changed, 14 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index b822b8a40c65..82632e7e34f0 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -1144,8 +1144,6 @@ static int mv_port_start(struct ata_port *ap)
 	struct device *dev = ap->host->dev;
 	struct mv_host_priv *hpriv = ap->host->private_data;
 	struct mv_port_priv *pp;
-	void __iomem *port_mmio = mv_ap_base(ap);
-	unsigned long flags;
 	int tag;
 
 	pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
@@ -1178,18 +1176,6 @@ static int mv_port_start(struct ata_port *ap)
 			pp->sg_tbl_dma[tag] = pp->sg_tbl_dma[0];
 		}
 	}
-
-	spin_lock_irqsave(&ap->host->lock, flags);
-
-	mv_edma_cfg(ap, 0);
-	mv_set_edma_ptrs(port_mmio, hpriv, pp);
-
-	spin_unlock_irqrestore(&ap->host->lock, flags);
-
-	/* Don't turn on EDMA here...do it before DMA commands only.  Else
-	 * we'll be unable to send non-data, PIO, etc due to restricted access
-	 * to shadow regs.
-	 */
 	return 0;
 
 out_port_free_dma_mem:
-- 
cgit v1.2.2


From 094e50b2f74146d8ee924fea4808e58c4ed2f163 Mon Sep 17 00:00:00 2001
From: Mark Lord <liml@rtr.ca>
Date: Wed, 16 Apr 2008 15:01:19 -0400
Subject: sata_mv add temporary 3 second init delay for SiliconImage PMs

sata_mv does not yet fully support hotplug (coming soon, though).
This means that the driver may not find a Silicon Image port-multiplier
when first loaded, because those devices take in exceess of 3 seconds
to sync up the SATA PHY (most devices do this in mere microseconds).

So, as a short-term interim measure, here we insert a 3-second pause
on initial driver load, once per controller board (not once per port!),
to allow the Silicon Image port-multipliers to be detected later.

This will be removed again (soon!) once hotplug is fully implemented/working.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/sata_mv.c | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'drivers/ata')

diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 82632e7e34f0..05ff8c776497 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -2105,6 +2105,13 @@ static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio,
 		printk(KERN_ERR DRV_NAME ": can't clear global reset\n");
 		rc = 1;
 	}
+	/*
+	 * Temporary: wait 3 seconds before port-probing can happen,
+	 * so that we don't miss finding sleepy SilXXXX port-multipliers.
+	 * This can go away once hotplug is fully/correctly implemented.
+	 */
+	if (rc == 0)
+		msleep(3000);
 done:
 	return rc;
 }
-- 
cgit v1.2.2


From 48feb3c419508487becfb9ea3afcc54c3eac6d80 Mon Sep 17 00:00:00 2001
From: Shaohua Li <shaohua.li@intel.com>
Date: Tue, 25 Mar 2008 16:50:45 +0800
Subject: ata-acpi: don't call _GTF for disabled drive

I got below log after a S3 resume in a ASUS A6VC laptop. The system has
only one IDE drive. It appears there is no reason calling _GTF for
disabled drive.

ACPI Error (dsopcode-0483): Attempt to CreateField of length zero [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node df822a7c), AE_AML_OPERAND_VALUE
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node df822bd0), AE_AML_OPERAND_VALUE
ata2.00: _GTF evaluation failed (AE 0x3006)
ACPI Error (dsopcode-0483): Attempt to CreateField of length zero [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node df822a7c), AE_AML_OPERAND_VALUE
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV1._GTF] (Node df822b94), AE_AML_OPERAND_VALUE
ata2.01: _GTF evaluation failed (AE 0x3006)

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/libata-acpi.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'drivers/ata')

diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index f88a4f940e11..8c1cfc645c85 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -839,7 +839,8 @@ void ata_acpi_on_resume(struct ata_port *ap)
 		 */
 		ata_link_for_each_dev(dev, &ap->link) {
 			ata_acpi_clear_gtf(dev);
-			if (ata_dev_get_GTF(dev, NULL) >= 0)
+			if (ata_dev_enabled(dev) &&
+			    ata_dev_get_GTF(dev, NULL) >= 0)
 				dev->flags |= ATA_DFLAG_ACPI_PENDING;
 		}
 	} else {
@@ -849,7 +850,8 @@ void ata_acpi_on_resume(struct ata_port *ap)
 		 */
 		ata_link_for_each_dev(dev, &ap->link) {
 			ata_acpi_clear_gtf(dev);
-			dev->flags |= ATA_DFLAG_ACPI_PENDING;
+			if (ata_dev_enabled(dev))
+				dev->flags |= ATA_DFLAG_ACPI_PENDING;
 		}
 	}
 }
-- 
cgit v1.2.2