From 5d728824efeda61d304153bfcf1378a3c18b7d70 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 17 Apr 2007 23:44:08 +0900 Subject: libata: convert the remaining PATA drivers to new init model Convert pdc_adma, pata_cs5520, pata_isapnp, pata_ixp4xx_cf, pata_legacy, pata_mpc52xx, pata_mpiix, pata_pcmcia, pata_pdc2027x, pata_platform, pata_qdi, pata_scc and pata_winbond to new init model. * init_one()'s now follow more consistent init order * cs5520 now registers one host with two ports, not two hosts. If any of the two ports are disabled, it's made dummy as other drivers do. Tested pdc_adma and pata_legacy. Both are as broken as before. The rest are compile tested only. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/pata_cs5520.c | 130 +++++++++++++++++++++++-------------------- drivers/ata/pata_isapnp.c | 43 +++++++------- drivers/ata/pata_ixp4xx_cf.c | 39 ++++++------- drivers/ata/pata_legacy.c | 38 ++++++------- drivers/ata/pata_mpc52xx.c | 46 +++++++-------- drivers/ata/pata_mpiix.c | 36 ++++++------ drivers/ata/pata_pcmcia.c | 40 ++++++------- drivers/ata/pata_pdc2027x.c | 98 +++++++++++++------------------- drivers/ata/pata_platform.c | 43 +++++++------- drivers/ata/pata_qdi.c | 45 +++++++-------- drivers/ata/pata_scc.c | 51 ++++++----------- drivers/ata/pata_winbond.c | 97 +++++++++++++++----------------- drivers/ata/pdc_adma.c | 85 +++++++++++----------------- 13 files changed, 362 insertions(+), 429 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c index b5b27baa0be1..79bef0d1fad3 100644 --- a/drivers/ata/pata_cs5520.c +++ b/drivers/ata/pata_cs5520.c @@ -186,7 +186,6 @@ static struct ata_port_operations cs5520_port_ops = { .qc_issue = ata_qc_issue_prot, .data_xfer = ata_data_xfer, - .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, .irq_ack = ata_irq_ack, @@ -194,91 +193,104 @@ static struct ata_port_operations cs5520_port_ops = { .port_start = ata_port_start, }; -static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { + struct ata_port_info pi = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = 0x1f, + .port_ops = &cs5520_port_ops, + }; + const struct ata_port_info *ppi[2]; u8 pcicfg; - void __iomem *iomap[5]; - static struct ata_probe_ent probe[2]; - int ports = 0; + void *iomap[5]; + struct ata_host *host; + struct ata_ioports *ioaddr; + int i, rc; /* IDE port enable bits */ - pci_read_config_byte(dev, 0x60, &pcicfg); + pci_read_config_byte(pdev, 0x60, &pcicfg); /* Check if the ATA ports are enabled */ if ((pcicfg & 3) == 0) return -ENODEV; + ppi[0] = ppi[1] = &ata_dummy_port_info; + if (pcicfg & 1) + ppi[0] = π + if (pcicfg & 2) + ppi[1] = π + if ((pcicfg & 0x40) == 0) { - printk(KERN_WARNING DRV_NAME ": DMA mode disabled. Enabling.\n"); - pci_write_config_byte(dev, 0x60, pcicfg | 0x40); + dev_printk(KERN_WARNING, &pdev->dev, + "DMA mode disabled. Enabling.\n"); + pci_write_config_byte(pdev, 0x60, pcicfg | 0x40); } + pi.mwdma_mask = id->driver_data; + + host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2); + if (!host) + return -ENOMEM; + /* Perform set up for DMA */ - if (pci_enable_device_bars(dev, 1<<2)) { + if (pci_enable_device_bars(pdev, 1<<2)) { printk(KERN_ERR DRV_NAME ": unable to configure BAR2.\n"); return -ENODEV; } - pci_set_master(dev); - if (pci_set_dma_mask(dev, DMA_32BIT_MASK)) { + + if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) { printk(KERN_ERR DRV_NAME ": unable to configure DMA mask.\n"); return -ENODEV; } - if (pci_set_consistent_dma_mask(dev, DMA_32BIT_MASK)) { + if (pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) { printk(KERN_ERR DRV_NAME ": unable to configure consistent DMA mask.\n"); return -ENODEV; } - /* Map IO ports */ - iomap[0] = devm_ioport_map(&dev->dev, 0x1F0, 8); - iomap[1] = devm_ioport_map(&dev->dev, 0x3F6, 1); - iomap[2] = devm_ioport_map(&dev->dev, 0x170, 8); - iomap[3] = devm_ioport_map(&dev->dev, 0x376, 1); - iomap[4] = pcim_iomap(dev, 2, 0); + /* Map IO ports and initialize host accordingly */ + iomap[0] = devm_ioport_map(&pdev->dev, 0x1F0, 8); + iomap[1] = devm_ioport_map(&pdev->dev, 0x3F6, 1); + iomap[2] = devm_ioport_map(&pdev->dev, 0x170, 8); + iomap[3] = devm_ioport_map(&pdev->dev, 0x376, 1); + iomap[4] = pcim_iomap(pdev, 2, 0); if (!iomap[0] || !iomap[1] || !iomap[2] || !iomap[3] || !iomap[4]) return -ENOMEM; - /* We have to do our own plumbing as the PCI setup for this - chipset is non-standard so we can't punt to the libata code */ - - INIT_LIST_HEAD(&probe[0].node); - probe[0].dev = pci_dev_to_dev(dev); - probe[0].port_ops = &cs5520_port_ops; - probe[0].sht = &cs5520_sht; - probe[0].pio_mask = 0x1F; - probe[0].mwdma_mask = id->driver_data; - probe[0].irq = 14; - probe[0].irq_flags = 0; - probe[0].port_flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST; - probe[0].n_ports = 1; - probe[0].port[0].cmd_addr = iomap[0]; - probe[0].port[0].ctl_addr = iomap[1]; - probe[0].port[0].altstatus_addr = iomap[1]; - probe[0].port[0].bmdma_addr = iomap[4]; - - /* The secondary lurks at different addresses but is otherwise - the same beastie */ - - probe[1] = probe[0]; - INIT_LIST_HEAD(&probe[1].node); - probe[1].irq = 15; - probe[1].port[0].cmd_addr = iomap[2]; - probe[1].port[0].ctl_addr = iomap[3]; - probe[1].port[0].altstatus_addr = iomap[3]; - probe[1].port[0].bmdma_addr = iomap[4] + 8; - - /* Let libata fill in the port details */ - ata_std_ports(&probe[0].port[0]); - ata_std_ports(&probe[1].port[0]); - - /* Now add the ports that are active */ - if (pcicfg & 1) - ports += ata_device_add(&probe[0]); - if (pcicfg & 2) - ports += ata_device_add(&probe[1]); - if (ports) - return 0; - return -ENODEV; + ioaddr = &host->ports[0]->ioaddr; + ioaddr->cmd_addr = iomap[0]; + ioaddr->ctl_addr = iomap[1]; + ioaddr->altstatus_addr = iomap[1]; + ioaddr->bmdma_addr = iomap[4]; + ata_std_ports(ioaddr); + + ioaddr = &host->ports[1]->ioaddr; + ioaddr->cmd_addr = iomap[2]; + ioaddr->ctl_addr = iomap[3]; + ioaddr->altstatus_addr = iomap[3]; + ioaddr->bmdma_addr = iomap[4] + 8; + ata_std_ports(ioaddr); + + /* activate the host */ + pci_set_master(pdev); + rc = ata_host_start(host); + if (rc) + return rc; + + for (i = 0; i < 2; i++) { + static const int irq[] = { 14, 15 }; + struct ata_port *ap = host->ports[0]; + + if (ata_port_is_dummy(ap)) + continue; + + rc = devm_request_irq(&pdev->dev, irq[ap->port_no], + ata_interrupt, 0, DRV_NAME, host); + if (rc) + return rc; + } + + return ata_host_register(host, &cs5520_sht); } /** diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c index 2580ab3146bf..d042efdfbac4 100644 --- a/drivers/ata/pata_isapnp.c +++ b/drivers/ata/pata_isapnp.c @@ -56,7 +56,6 @@ static struct ata_port_operations isapnp_port_ops = { .data_xfer = ata_data_xfer, - .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, .irq_ack = ata_irq_ack, @@ -75,8 +74,10 @@ static struct ata_port_operations isapnp_port_ops = { static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev_id) { - struct ata_probe_ent ae; + struct ata_host *host; + struct ata_port *ap; void __iomem *cmd_addr, *ctl_addr; + int rc; if (pnp_port_valid(idev, 0) == 0) return -ENODEV; @@ -85,34 +86,36 @@ static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev if (pnp_irq_valid(idev, 0) == 0) return -ENODEV; + /* allocate host */ + host = ata_host_alloc(&idev->dev, 1); + if (!host) + return -ENOMEM; + + /* acquire resources and fill host */ cmd_addr = devm_ioport_map(&idev->dev, pnp_port_start(idev, 0), 8); if (!cmd_addr) return -ENOMEM; - memset(&ae, 0, sizeof(struct ata_probe_ent)); - INIT_LIST_HEAD(&ae.node); - ae.dev = &idev->dev; - ae.port_ops = &isapnp_port_ops; - ae.sht = &isapnp_sht; - ae.n_ports = 1; - ae.pio_mask = 1; /* ISA so PIO 0 cycles */ - ae.irq = pnp_irq(idev, 0); - ae.irq_flags = 0; - ae.port_flags = ATA_FLAG_SLAVE_POSS; - ae.port[0].cmd_addr = cmd_addr; + ap = host->ports[0]; + + ap->ops = &isapnp_port_ops; + ap->pio_mask = 1; + ap->flags |= ATA_FLAG_SLAVE_POSS; + + ap->ioaddr.cmd_addr = cmd_addr; if (pnp_port_valid(idev, 1) == 0) { ctl_addr = devm_ioport_map(&idev->dev, pnp_port_start(idev, 1), 1); - ae.port[0].altstatus_addr = ctl_addr; - ae.port[0].ctl_addr = ctl_addr; - ae.port_flags |= ATA_FLAG_SRST; + ap->ioaddr.altstatus_addr = ctl_addr; + ap->ioaddr.ctl_addr = ctl_addr; } - ata_std_ports(&ae.port[0]); - if (ata_device_add(&ae) == 0) - return -ENODEV; - return 0; + ata_std_ports(&ap->ioaddr); + + /* activate */ + return ata_host_activate(host, pnp_irq(idev, 0), ata_interrupt, 0, + &isapnp_sht); } /** diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c index 8257af84ff7c..420c343e5711 100644 --- a/drivers/ata/pata_ixp4xx_cf.c +++ b/drivers/ata/pata_ixp4xx_cf.c @@ -131,7 +131,6 @@ static struct ata_port_operations ixp4xx_port_ops = { .data_xfer = ixp4xx_mmio_data_xfer, .cable_detect = ata_cable_40wire, - .irq_handler = ata_interrupt, .irq_clear = ixp4xx_irq_clear, .irq_on = ata_irq_on, .irq_ack = ata_irq_ack, @@ -174,12 +173,12 @@ static void ixp4xx_setup_port(struct ata_ioports *ioaddr, static __devinit int ixp4xx_pata_probe(struct platform_device *pdev) { - int ret; unsigned int irq; struct resource *cs0, *cs1; - struct ata_probe_ent ae; - + struct ata_host *host; + struct ata_port *ap; struct ixp4xx_pata_data *data = pdev->dev.platform_data; + int rc; cs0 = platform_get_resource(pdev, IORESOURCE_MEM, 0); cs1 = platform_get_resource(pdev, IORESOURCE_MEM, 1); @@ -187,6 +186,12 @@ static __devinit int ixp4xx_pata_probe(struct platform_device *pdev) if (!cs0 || !cs1) return -EINVAL; + /* allocate host */ + host = ata_host_alloc(&pdev->dev, 1); + if (!host) + return -ENOMEM; + + /* acquire resources and fill host */ pdev->dev.coherent_dma_mask = DMA_32BIT_MASK; data->cs0 = devm_ioremap(&pdev->dev, cs0->start, 0x1000); @@ -200,32 +205,22 @@ static __devinit int ixp4xx_pata_probe(struct platform_device *pdev) *data->cs0_cfg = data->cs0_bits; *data->cs1_cfg = data->cs1_bits; - memset(&ae, 0, sizeof(struct ata_probe_ent)); - INIT_LIST_HEAD(&ae.node); + ap = host->ports[0]; - ae.dev = &pdev->dev; - ae.port_ops = &ixp4xx_port_ops; - ae.sht = &ixp4xx_sht; - ae.n_ports = 1; - ae.pio_mask = 0x1f; /* PIO4 */ - ae.irq = irq; - ae.irq_flags = 0; - ae.port_flags = ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY - | ATA_FLAG_NO_ATAPI | ATA_FLAG_SRST; + ap->ops = &ixp4xx_port_ops; + ap->pio_mask = 0x1f; /* PIO4 */ + ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY | ATA_FLAG_NO_ATAPI; /* run in polling mode if no irq has been assigned */ if (!irq) - ae.port_flags |= ATA_FLAG_PIO_POLLING; + ap->flags |= ATA_FLAG_PIO_POLLING; - ixp4xx_setup_port(&ae.port[0], data); + ixp4xx_setup_port(&ap->ioaddr, data); dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n"); - ret = ata_device_add(&ae); - if (ret == 0) - return -ENODEV; - - return 0; + /* activate host */ + return ata_host_activate(host, irq, ata_interrupt, 0, &ixp4xx_sht); } static __devexit int ixp4xx_pata_remove(struct platform_device *dev) diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index 0b1749a84df2..707099291e01 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -716,7 +716,8 @@ static struct ata_port_operations opti82c46x_port_ops = { static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl, int irq) { struct legacy_data *ld = &legacy_data[nr_legacy_host]; - struct ata_probe_ent ae; + struct ata_host *host; + struct ata_port *ap; struct platform_device *pdev; struct ata_port_operations *ops = &legacy_port_ops; void __iomem *io_addr, *ctrl_addr; @@ -798,24 +799,23 @@ static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl if (ops == &legacy_port_ops && (autospeed & mask)) ops = &simple_port_ops; - memset(&ae, 0, sizeof(struct ata_probe_ent)); - INIT_LIST_HEAD(&ae.node); - ae.dev = &pdev->dev; - ae.port_ops = ops; - ae.sht = &legacy_sht; - ae.n_ports = 1; - ae.pio_mask = pio_modes; - ae.irq = irq; - ae.irq_flags = 0; - ae.port_flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST|iordy; - ae.port[0].cmd_addr = io_addr; - ae.port[0].altstatus_addr = ctrl_addr; - ae.port[0].ctl_addr = ctrl_addr; - ata_std_ports(&ae.port[0]); - ae.private_data = ld; - - ret = -ENODEV; - if (!ata_device_add(&ae)) + ret = -ENOMEM; + host = ata_host_alloc(&pdev->dev, 1); + if (!host) + goto fail; + ap = host->ports[0]; + + ap->ops = ops; + ap->pio_mask = pio_modes; + ap->flags |= ATA_FLAG_SLAVE_POSS | iordy; + ap->ioaddr.cmd_addr = io_addr; + ap->ioaddr.altstatus_addr = ctrl_addr; + ap->ioaddr.ctl_addr = ctrl_addr; + ata_std_ports(&ap->ioaddr); + ap->private_data = ld; + + ret = ata_host_activate(host, irq, ata_interrupt, 0, &legacy_sht); + if (ret) goto fail; legacy_host[nr_legacy_host++] = dev_get_drvdata(&pdev->dev); diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c index 77b57321ff52..9587a89f9683 100644 --- a/drivers/ata/pata_mpc52xx.c +++ b/drivers/ata/pata_mpc52xx.c @@ -301,35 +301,33 @@ static struct ata_port_operations mpc52xx_ata_port_ops = { .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, .data_xfer = ata_data_xfer, - .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, .irq_ack = ata_irq_ack, .port_start = ata_port_start, }; -static struct ata_probe_ent mpc52xx_ata_probe_ent = { - .port_ops = &mpc52xx_ata_port_ops, - .sht = &mpc52xx_ata_sht, - .n_ports = 1, - .pio_mask = 0x1f, /* Up to PIO4 */ - .mwdma_mask = 0x00, /* No MWDMA */ - .udma_mask = 0x00, /* No UDMA */ - .port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, - .irq_flags = 0, -}; - static int __devinit mpc52xx_ata_init_one(struct device *dev, struct mpc52xx_ata_priv *priv) { - struct ata_probe_ent *ae = &mpc52xx_ata_probe_ent; - struct ata_ioports *aio = &ae->port[0]; - int rv; - - INIT_LIST_HEAD(&ae->node); - ae->dev = dev; - ae->irq = priv->ata_irq; - + struct ata_host *host; + struct ata_port *ap; + struct ata_ioports *aio; + int rc; + + host = ata_host_alloc(dev, 1); + if (!host) + return -ENOMEM; + + ap = host->ports[0]; + ap->flags |= ATA_FLAG_SLAVE_POSS; + ap->pio_mask = 0x1f; /* Up to PIO4 */ + ap->mwdma_mask = 0x00; /* No MWDMA */ + ap->udma_mask = 0x00; /* No UDMA */ + ap->ops = &mpc52xx_ata_port_ops; + host->private_data = priv; + + aio = &ap->ioaddr; aio->cmd_addr = NULL; /* Don't have a classic reg block */ aio->altstatus_addr = &priv->ata_regs->tf_control; aio->ctl_addr = &priv->ata_regs->tf_control; @@ -344,11 +342,9 @@ mpc52xx_ata_init_one(struct device *dev, struct mpc52xx_ata_priv *priv) aio->status_addr = &priv->ata_regs->tf_command; aio->command_addr = &priv->ata_regs->tf_command; - ae->private_data = priv; - - rv = ata_device_add(ae); - - return rv ? 0 : -EINVAL; + /* activate host */ + return ata_host_activate(host, priv->ata_irq, ata_interrupt, 0, + &mpc52xx_ata_sht); } static struct mpc52xx_ata_priv * diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c index 1718eaca731f..987c5fafab08 100644 --- a/drivers/ata/pata_mpiix.c +++ b/drivers/ata/pata_mpiix.c @@ -190,7 +190,6 @@ static struct ata_port_operations mpiix_port_ops = { .qc_issue = mpiix_qc_issue_prot, .data_xfer = ata_data_xfer, - .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, .irq_ack = ata_irq_ack, @@ -201,8 +200,9 @@ static struct ata_port_operations mpiix_port_ops = { static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id) { /* Single threaded by the PCI probe logic */ - static struct ata_probe_ent probe; static int printed_version; + struct ata_host *host; + struct ata_port *ap; void __iomem *cmd_addr, *ctl_addr; u16 idetim; int irq; @@ -210,6 +210,10 @@ static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id) if (!printed_version++) dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n"); + host = ata_host_alloc(&dev->dev, 1); + if (!host) + return -ENOMEM; + /* MPIIX has many functions which can be turned on or off according to other devices present. Make sure IDE is enabled before we try and use it */ @@ -238,27 +242,21 @@ static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id) without BARs set fools the setup. #2 If you pci_disable_device the MPIIX your box goes castors up */ - INIT_LIST_HEAD(&probe.node); - probe.dev = pci_dev_to_dev(dev); - probe.port_ops = &mpiix_port_ops; - probe.sht = &mpiix_sht; - probe.pio_mask = 0x1F; - probe.irq_flags = IRQF_SHARED; - probe.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST; - probe.n_ports = 1; + ap = host->ports[0]; + ap->ops = &mpiix_port_ops; + ap->pio_mask = 0x1F; + ap->flags |= ATA_FLAG_SLAVE_POSS; - probe.irq = irq; - probe.port[0].cmd_addr = cmd_addr; - probe.port[0].ctl_addr = ctl_addr; - probe.port[0].altstatus_addr = ctl_addr; + ap->ioaddr.cmd_addr = cmd_addr; + ap->ioaddr.ctl_addr = ctl_addr; + ap->ioaddr.altstatus_addr = ctl_addr; /* Let libata fill in the port details */ - ata_std_ports(&probe.port[0]); + ata_std_ports(&ap->ioaddr); - /* Now add the port that is active */ - if (ata_device_add(&probe)) - return 0; - return -ENODEV; + /* activate host */ + return ata_host_activate(host, irq, ata_interrupt, IRQF_SHARED, + &mpiix_sht); } static const struct pci_device_id mpiix[] = { diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 171da0aeb65f..75dc84797ff3 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -125,7 +125,6 @@ static struct ata_port_operations pcmcia_port_ops = { .data_xfer = ata_data_xfer_noirq, - .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, .irq_ack = ata_irq_ack, @@ -146,7 +145,8 @@ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) static int pcmcia_init_one(struct pcmcia_device *pdev) { - struct ata_probe_ent ae; + struct ata_host *host; + struct ata_port *ap; struct ata_pcmcia_info *info; tuple_t tuple; struct { @@ -290,24 +290,24 @@ next_entry: * Having done the PCMCIA plumbing the ATA side is relatively * sane. */ - - memset(&ae, 0, sizeof(struct ata_probe_ent)); - INIT_LIST_HEAD(&ae.node); - ae.dev = &pdev->dev; - ae.port_ops = &pcmcia_port_ops; - ae.sht = &pcmcia_sht; - ae.n_ports = 1; - ae.pio_mask = 1; /* ISA so PIO 0 cycles */ - ae.irq = pdev->irq.AssignedIRQ; - ae.irq_flags = IRQF_SHARED; - ae.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST; - ae.port[0].cmd_addr = io_addr; - ae.port[0].altstatus_addr = ctl_addr; - ae.port[0].ctl_addr = ctl_addr; - ata_std_ports(&ae.port[0]); - - ret = -ENODEV; - if (ata_device_add(&ae) == 0) + ret = -ENOMEM; + host = ata_host_alloc(&pdev->dev, 1); + if (!host) + goto failed; + ap = host->ports[0]; + + ap->ops = &pcmcia_port_ops; + ap->pio_mask = 1; /* ISA so PIO 0 cycles */ + ap->flags |= ATA_FLAG_SLAVE_POSS; + ap->ioaddr.cmd_addr = io_addr; + ap->ioaddr.altstatus_addr = ctl_addr; + ap->ioaddr.ctl_addr = ctl_addr; + ata_std_ports(&ap->ioaddr); + + /* activate */ + ret = ata_host_activate(host, pdev->irq.AssignedIRQ, ata_interrupt, + IRQF_SHARED, &pcmcia_sht); + if (ret) goto failed; info->ndev = 1; diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c index 8261f4f8c1dc..a61cbc110688 100644 --- a/drivers/ata/pata_pdc2027x.c +++ b/drivers/ata/pata_pdc2027x.c @@ -171,7 +171,6 @@ static struct ata_port_operations pdc2027x_pata100_ops = { .post_internal_cmd = ata_bmdma_post_internal_cmd, .cable_detect = pdc2027x_cable_detect, - .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, .irq_ack = ata_irq_ack, @@ -207,7 +206,6 @@ static struct ata_port_operations pdc2027x_pata133_ops = { .post_internal_cmd = ata_bmdma_post_internal_cmd, .cable_detect = pdc2027x_cable_detect, - .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, .irq_ack = ata_irq_ack, @@ -218,7 +216,6 @@ static struct ata_port_operations pdc2027x_pata133_ops = { static struct ata_port_info pdc2027x_port_info[] = { /* PDC_UDMA_100 */ { - .sht = &pdc2027x_sht, .flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_SLAVE_POSS | ATA_FLAG_MMIO, .pio_mask = 0x1f, /* pio0-4 */ @@ -228,7 +225,6 @@ static struct ata_port_info pdc2027x_port_info[] = { }, /* PDC_UDMA_133 */ { - .sht = &pdc2027x_sht, .flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_SLAVE_POSS | ATA_FLAG_MMIO, .pio_mask = 0x1f, /* pio0-4 */ @@ -555,12 +551,12 @@ static int pdc2027x_check_atapi_dma(struct ata_queued_cmd *qc) /** * pdc_read_counter - Read the ctr counter - * @probe_ent: for the port address + * @host: target ATA host */ -static long pdc_read_counter(struct ata_probe_ent *probe_ent) +static long pdc_read_counter(struct ata_host *host) { - void __iomem *mmio_base = probe_ent->iomap[PDC_MMIO_BAR]; + void __iomem *mmio_base = host->iomap[PDC_MMIO_BAR]; long counter; int retry = 1; u32 bccrl, bccrh, bccrlv, bccrhv; @@ -598,12 +594,12 @@ retry: * adjust_pll - Adjust the PLL input clock in Hz. * * @pdc_controller: controller specific information - * @probe_ent: For the port address + * @host: target ATA host * @pll_clock: The input of PLL in HZ */ -static void pdc_adjust_pll(struct ata_probe_ent *probe_ent, long pll_clock, unsigned int board_idx) +static void pdc_adjust_pll(struct ata_host *host, long pll_clock, unsigned int board_idx) { - void __iomem *mmio_base = probe_ent->iomap[PDC_MMIO_BAR]; + void __iomem *mmio_base = host->iomap[PDC_MMIO_BAR]; u16 pll_ctl; long pll_clock_khz = pll_clock / 1000; long pout_required = board_idx? PDC_133_MHZ:PDC_100_MHZ; @@ -683,19 +679,19 @@ static void pdc_adjust_pll(struct ata_probe_ent *probe_ent, long pll_clock, unsi /** * detect_pll_input_clock - Detect the PLL input clock in Hz. - * @probe_ent: for the port address + * @host: target ATA host * Ex. 16949000 on 33MHz PCI bus for pdc20275. * Half of the PCI clock. */ -static long pdc_detect_pll_input_clock(struct ata_probe_ent *probe_ent) +static long pdc_detect_pll_input_clock(struct ata_host *host) { - void __iomem *mmio_base = probe_ent->iomap[PDC_MMIO_BAR]; + void __iomem *mmio_base = host->iomap[PDC_MMIO_BAR]; u32 scr; long start_count, end_count; long pll_clock; /* Read current counter value */ - start_count = pdc_read_counter(probe_ent); + start_count = pdc_read_counter(host); /* Start the test mode */ scr = readl(mmio_base + PDC_SYS_CTL); @@ -707,7 +703,7 @@ static long pdc_detect_pll_input_clock(struct ata_probe_ent *probe_ent) mdelay(100); /* Read the counter values again */ - end_count = pdc_read_counter(probe_ent); + end_count = pdc_read_counter(host); /* Stop the test mode */ scr = readl(mmio_base + PDC_SYS_CTL); @@ -726,11 +722,10 @@ static long pdc_detect_pll_input_clock(struct ata_probe_ent *probe_ent) /** * pdc_hardware_init - Initialize the hardware. - * @pdev: instance of pci_dev found - * @pdc_controller: controller specific information - * @pe: for the port address + * @host: target ATA host + * @board_idx: board identifier */ -static int pdc_hardware_init(struct pci_dev *pdev, struct ata_probe_ent *pe, unsigned int board_idx) +static int pdc_hardware_init(struct ata_host *host, unsigned int board_idx) { long pll_clock; @@ -740,15 +735,15 @@ static int pdc_hardware_init(struct pci_dev *pdev, struct ata_probe_ent *pe, uns * Ex. 25MHz or 40MHz, we have to adjust the cycle_time. * The pdc20275 controller employs PLL circuit to help correct timing registers setting. */ - pll_clock = pdc_detect_pll_input_clock(pe); + pll_clock = pdc_detect_pll_input_clock(host); if (pll_clock < 0) /* counter overflow? Try again. */ - pll_clock = pdc_detect_pll_input_clock(pe); + pll_clock = pdc_detect_pll_input_clock(host); - dev_printk(KERN_INFO, &pdev->dev, "PLL input clock %ld kHz\n", pll_clock/1000); + dev_printk(KERN_INFO, host->dev, "PLL input clock %ld kHz\n", pll_clock/1000); /* Adjust PLL control register */ - pdc_adjust_pll(pe, pll_clock, board_idx); + pdc_adjust_pll(host, pll_clock, board_idx); return 0; } @@ -780,8 +775,7 @@ static void pdc_ata_setup_port(struct ata_ioports *port, void __iomem *base) * Called when an instance of PCI adapter is inserted. * This function checks whether the hardware is supported, * initialize hardware and register an instance of ata_host to - * libata by providing struct ata_probe_ent and ata_device_add(). - * (implements struct pci_driver.probe() ) + * libata. (implements struct pci_driver.probe() ) * * @pdev: instance of pci_dev found * @ent: matching entry in the id_tbl[] @@ -790,14 +784,21 @@ static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_de { static int printed_version; unsigned int board_idx = (unsigned int) ent->driver_data; - - struct ata_probe_ent *probe_ent; + const struct ata_port_info *ppi[] = + { &pdc2027x_port_info[board_idx], NULL }; + struct ata_host *host; void __iomem *mmio_base; int rc; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); + /* alloc host */ + host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2); + if (!host) + return -ENOMEM; + + /* acquire resources and fill host */ rc = pcim_enable_device(pdev); if (rc) return rc; @@ -805,6 +806,7 @@ static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_de rc = pcim_iomap_regions(pdev, 1 << PDC_MMIO_BAR, DRV_NAME); if (rc) return rc; + host->iomap = pcim_iomap_table(pdev); rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); if (rc) @@ -814,46 +816,22 @@ static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_de if (rc) return rc; - /* Prepare the probe entry */ - probe_ent = devm_kzalloc(&pdev->dev, sizeof(*probe_ent), GFP_KERNEL); - if (probe_ent == NULL) - return -ENOMEM; - - probe_ent->dev = pci_dev_to_dev(pdev); - INIT_LIST_HEAD(&probe_ent->node); - - probe_ent->sht = pdc2027x_port_info[board_idx].sht; - probe_ent->port_flags = pdc2027x_port_info[board_idx].flags; - probe_ent->pio_mask = pdc2027x_port_info[board_idx].pio_mask; - probe_ent->mwdma_mask = pdc2027x_port_info[board_idx].mwdma_mask; - probe_ent->udma_mask = pdc2027x_port_info[board_idx].udma_mask; - probe_ent->port_ops = pdc2027x_port_info[board_idx].port_ops; + mmio_base = host->iomap[PDC_MMIO_BAR]; - probe_ent->irq = pdev->irq; - probe_ent->irq_flags = IRQF_SHARED; - probe_ent->iomap = pcim_iomap_table(pdev); + pdc_ata_setup_port(&host->ports[0]->ioaddr, mmio_base + 0x17c0); + host->ports[0]->ioaddr.bmdma_addr = mmio_base + 0x1000; + pdc_ata_setup_port(&host->ports[1]->ioaddr, mmio_base + 0x15c0); + host->ports[1]->ioaddr.bmdma_addr = mmio_base + 0x1008; - mmio_base = probe_ent->iomap[PDC_MMIO_BAR]; - - pdc_ata_setup_port(&probe_ent->port[0], mmio_base + 0x17c0); - probe_ent->port[0].bmdma_addr = mmio_base + 0x1000; - pdc_ata_setup_port(&probe_ent->port[1], mmio_base + 0x15c0); - probe_ent->port[1].bmdma_addr = mmio_base + 0x1008; - - probe_ent->n_ports = 2; - - pci_set_master(pdev); //pci_enable_intx(pdev); /* initialize adapter */ - if (pdc_hardware_init(pdev, probe_ent, board_idx) != 0) + if (pdc_hardware_init(host, board_idx) != 0) return -EIO; - if (!ata_device_add(probe_ent)) - return -ENODEV; - - devm_kfree(&pdev->dev, probe_ent); - return 0; + pci_set_master(pdev); + return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED, + &pdc2027x_sht); } /** diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c index 507eb1ee05f8..a0a650c7f272 100644 --- a/drivers/ata/pata_platform.c +++ b/drivers/ata/pata_platform.c @@ -87,7 +87,6 @@ static struct ata_port_operations pata_platform_port_ops = { .data_xfer = ata_data_xfer_noirq, - .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, .irq_ack = ata_irq_ack, @@ -136,7 +135,8 @@ static void pata_platform_setup_port(struct ata_ioports *ioaddr, static int __devinit pata_platform_probe(struct platform_device *pdev) { struct resource *io_res, *ctl_res; - struct ata_probe_ent ae; + struct ata_host *host; + struct ata_port *ap; unsigned int mmio; /* @@ -176,44 +176,41 @@ static int __devinit pata_platform_probe(struct platform_device *pdev) /* * Now that that's out of the way, wire up the port.. */ - memset(&ae, 0, sizeof(struct ata_probe_ent)); - INIT_LIST_HEAD(&ae.node); - ae.dev = &pdev->dev; - ae.port_ops = &pata_platform_port_ops; - ae.sht = &pata_platform_sht; - ae.n_ports = 1; - ae.pio_mask = pio_mask; - ae.irq = platform_get_irq(pdev, 0); - ae.irq_flags = 0; - ae.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST; + host = ata_host_alloc(&pdev->dev, 1); + if (!host) + return -ENOMEM; + ap = host->ports[0]; + + ap->ops = &pata_platform_port_ops; + ap->pio_mask = pio_mask; + ap->flags |= ATA_FLAG_SLAVE_POSS; /* * Handle the MMIO case */ if (mmio) { - ae.port[0].cmd_addr = devm_ioremap(&pdev->dev, io_res->start, + ap->ioaddr.cmd_addr = devm_ioremap(&pdev->dev, io_res->start, io_res->end - io_res->start + 1); - ae.port[0].ctl_addr = devm_ioremap(&pdev->dev, ctl_res->start, + ap->ioaddr.ctl_addr = devm_ioremap(&pdev->dev, ctl_res->start, ctl_res->end - ctl_res->start + 1); } else { - ae.port[0].cmd_addr = devm_ioport_map(&pdev->dev, io_res->start, + ap->ioaddr.cmd_addr = devm_ioport_map(&pdev->dev, io_res->start, io_res->end - io_res->start + 1); - ae.port[0].ctl_addr = devm_ioport_map(&pdev->dev, ctl_res->start, + ap->ioaddr.ctl_addr = devm_ioport_map(&pdev->dev, ctl_res->start, ctl_res->end - ctl_res->start + 1); } - if (!ae.port[0].cmd_addr || !ae.port[0].ctl_addr) { + if (!ap->ioaddr.cmd_addr || !ap->ioaddr.ctl_addr) { dev_err(&pdev->dev, "failed to map IO/CTL base\n"); return -ENOMEM; } - ae.port[0].altstatus_addr = ae.port[0].ctl_addr; + ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr; - pata_platform_setup_port(&ae.port[0], pdev->dev.platform_data); + pata_platform_setup_port(&ap->ioaddr, pdev->dev.platform_data); - if (unlikely(ata_device_add(&ae) == 0)) - return -ENODEV; - - return 0; + /* activate */ + return ata_host_activate(host, platform_get_irq(pdev, 0), ata_interrupt, + 0, &pata_platform_sht); } /** diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c index 44472641db28..27685ce63ceb 100644 --- a/drivers/ata/pata_qdi.c +++ b/drivers/ata/pata_qdi.c @@ -190,7 +190,6 @@ static struct ata_port_operations qdi6500_port_ops = { .data_xfer = qdi_data_xfer, - .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, .irq_ack = ata_irq_ack, @@ -219,7 +218,6 @@ static struct ata_port_operations qdi6580_port_ops = { .data_xfer = qdi_data_xfer, - .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, .irq_ack = ata_irq_ack, @@ -240,8 +238,9 @@ static struct ata_port_operations qdi6580_port_ops = { static __init int qdi_init_one(unsigned long port, int type, unsigned long io, int irq, int fast) { - struct ata_probe_ent ae; struct platform_device *pdev; + struct ata_host *host; + struct ata_port *ap; void __iomem *io_addr, *ctl_addr; int ret; @@ -259,34 +258,31 @@ static __init int qdi_init_one(unsigned long port, int type, unsigned long io, i if (!io_addr || !ctl_addr) goto fail; - memset(&ae, 0, sizeof(struct ata_probe_ent)); - INIT_LIST_HEAD(&ae.node); - ae.dev = &pdev->dev; + ret = -ENOMEM; + host = ata_host_alloc(&pdev->dev, 1); + if (!host) + goto fail; + ap = host->ports[0]; if (type == 6580) { - ae.port_ops = &qdi6580_port_ops; - ae.pio_mask = 0x1F; - ae.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST; + ap->ops = &qdi6580_port_ops; + ap->pio_mask = 0x1F; + ap->flags |= ATA_FLAG_SLAVE_POSS; } else { - ae.port_ops = &qdi6500_port_ops; - ae.pio_mask = 0x07; /* Actually PIO3 !IORDY is possible */ - ae.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | - ATA_FLAG_NO_IORDY; + ap->ops = &qdi6500_port_ops; + ap->pio_mask = 0x07; /* Actually PIO3 !IORDY is possible */ + ap->flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY; } - ae.sht = &qdi_sht; - ae.n_ports = 1; - ae.irq = irq; - ae.irq_flags = 0; - ae.port[0].cmd_addr = io_addr; - ae.port[0].altstatus_addr = ctl_addr; - ae.port[0].ctl_addr = ctl_addr; - ata_std_ports(&ae.port[0]); + ap->ioaddr.cmd_addr = io_addr; + ap->ioaddr.altstatus_addr = ctl_addr; + ap->ioaddr.ctl_addr = ctl_addr; + ata_std_ports(&ap->ioaddr); /* * Hook in a private data structure per channel */ - ae.private_data = &qdi_data[nr_qdi_host]; + ap->private_data = &qdi_data[nr_qdi_host]; qdi_data[nr_qdi_host].timing = port; qdi_data[nr_qdi_host].fast = fast; @@ -294,8 +290,9 @@ static __init int qdi_init_one(unsigned long port, int type, unsigned long io, i printk(KERN_INFO DRV_NAME": qd%d at 0x%lx.\n", type, io); - ret = -ENODEV; - if (!ata_device_add(&ae)) + /* activate */ + ret = ata_host_activate(host, irq, ata_interrupt, 0, &qdi_sht); + if (ret) goto fail; qdi_host[nr_qdi_host++] = dev_get_drvdata(&pdev->dev); diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c index f3ed141fdc0e..5df354d573e8 100644 --- a/drivers/ata/pata_scc.c +++ b/drivers/ata/pata_scc.c @@ -1016,7 +1016,6 @@ static const struct ata_port_operations scc_pata_ops = { .error_handler = scc_error_handler, .post_internal_cmd = scc_bmdma_stop, - .irq_handler = ata_interrupt, .irq_clear = scc_bmdma_irq_clear, .irq_on = scc_irq_on, .irq_ack = scc_irq_ack, @@ -1027,7 +1026,6 @@ static const struct ata_port_operations scc_pata_ops = { static struct ata_port_info scc_port_info[] = { { - .sht = &scc_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x00, @@ -1040,10 +1038,10 @@ static struct ata_port_info scc_port_info[] = { * scc_reset_controller - initialize SCC PATA controller. */ -static int scc_reset_controller(struct ata_probe_ent *probe_ent) +static int scc_reset_controller(struct ata_host *host) { - void __iomem *ctrl_base = probe_ent->iomap[SCC_CTRL_BAR]; - void __iomem *bmid_base = probe_ent->iomap[SCC_BMID_BAR]; + void __iomem *ctrl_base = host->iomap[SCC_CTRL_BAR]; + void __iomem *bmid_base = host->iomap[SCC_BMID_BAR]; void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL; void __iomem *mode_port = ctrl_base + SCC_CTL_MODEREG; void __iomem *ecmode_port = ctrl_base + SCC_CTL_ECMODE; @@ -1104,17 +1102,15 @@ static void scc_setup_ports (struct ata_ioports *ioaddr, void __iomem *base) ioaddr->command_addr = ioaddr->cmd_addr + SCC_REG_CMD; } -static int scc_host_init(struct ata_probe_ent *probe_ent) +static int scc_host_init(struct ata_host *host) { - struct pci_dev *pdev = to_pci_dev(probe_ent->dev); + struct pci_dev *pdev = to_pci_dev(host->dev); int rc; - rc = scc_reset_controller(probe_ent); + rc = scc_reset_controller(host); if (rc) return rc; - probe_ent->n_ports = 1; - rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); if (rc) return rc; @@ -1122,7 +1118,7 @@ static int scc_host_init(struct ata_probe_ent *probe_ent) if (rc) return rc; - scc_setup_ports(&probe_ent->port[0], probe_ent->iomap[SCC_BMID_BAR]); + scc_setup_ports(&host->ports[0]->ioaddr, host->iomap[SCC_BMID_BAR]); pci_set_master(pdev); @@ -1145,14 +1141,18 @@ static int scc_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; unsigned int board_idx = (unsigned int) ent->driver_data; + const struct ata_port_info *ppi[] = { &scc_port_info[board_idx], NULL }; struct device *dev = &pdev->dev; - struct ata_probe_ent *probe_ent; int rc; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); + host = ata_port_alloc_pinfo(&pdev->dev, ppi, 1); + if (!host) + return -ENOMEM; + rc = pcim_enable_device(pdev); if (rc) return rc; @@ -1162,33 +1162,14 @@ static int scc_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) pcim_pin_device(pdev); if (rc) return rc; + host->iomap = pcim_iomap_table(pdev); - probe_ent = devm_kzalloc(dev, sizeof(*probe_ent), GFP_KERNEL); - if (!probe_ent) - return -ENOMEM; - - probe_ent->dev = dev; - INIT_LIST_HEAD(&probe_ent->node); - - probe_ent->sht = scc_port_info[board_idx].sht; - probe_ent->port_flags = scc_port_info[board_idx].flags; - probe_ent->pio_mask = scc_port_info[board_idx].pio_mask; - probe_ent->udma_mask = scc_port_info[board_idx].udma_mask; - probe_ent->port_ops = scc_port_info[board_idx].port_ops; - - probe_ent->irq = pdev->irq; - probe_ent->irq_flags = IRQF_SHARED; - probe_ent->iomap = pcim_iomap_table(pdev); - - rc = scc_host_init(probe_ent); + rc = scc_host_init(host); if (rc) return rc; - if (!ata_device_add(probe_ent)) - return -ENODEV; - - devm_kfree(dev, probe_ent); - return 0; + return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED, + &scc_sht); } static struct pci_driver scc_pci_driver = { diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c index 434f14f6f869..aa6d4bca2ea3 100644 --- a/drivers/ata/pata_winbond.c +++ b/drivers/ata/pata_winbond.c @@ -158,7 +158,6 @@ static struct ata_port_operations winbond_port_ops = { .data_xfer = winbond_data_xfer, - .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, .irq_ack = ata_irq_ack, @@ -179,11 +178,9 @@ static struct ata_port_operations winbond_port_ops = { static __init int winbond_init_one(unsigned long port) { - struct ata_probe_ent ae; struct platform_device *pdev; - int ret; u8 reg; - int i; + int i, rc; reg = winbond_readcfg(port, 0x81); reg |= 0x80; /* jumpered mode off */ @@ -202,58 +199,56 @@ static __init int winbond_init_one(unsigned long port) for (i = 0; i < 2 ; i ++) { unsigned long cmd_port = 0x1F0 - (0x80 * i); + struct ata_host *host; + struct ata_port *ap; void __iomem *cmd_addr, *ctl_addr; - if (reg & (1 << i)) { - /* - * Fill in a probe structure first of all - */ - - pdev = platform_device_register_simple(DRV_NAME, nr_winbond_host, NULL, 0); - if (IS_ERR(pdev)) - return PTR_ERR(pdev); - - cmd_addr = devm_ioport_map(&pdev->dev, cmd_port, 8); - ctl_addr = devm_ioport_map(&pdev->dev, cmd_port + 0x0206, 1); - if (!cmd_addr || !ctl_addr) { - platform_device_unregister(pdev); - return -ENOMEM; - } - - memset(&ae, 0, sizeof(struct ata_probe_ent)); - INIT_LIST_HEAD(&ae.node); - ae.dev = &pdev->dev; - - ae.port_ops = &winbond_port_ops; - ae.pio_mask = 0x1F; - - ae.sht = &winbond_sht; - - ae.n_ports = 1; - ae.irq = 14 + i; - ae.irq_flags = 0; - ae.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST; - ae.port[0].cmd_addr = cmd_addr; - ae.port[0].altstatus_addr = ctl_addr; - ae.port[0].ctl_addr = ctl_addr; - ata_std_ports(&ae.port[0]); - /* - * Hook in a private data structure per channel - */ - ae.private_data = &winbond_data[nr_winbond_host]; - winbond_data[nr_winbond_host].config = port; - winbond_data[nr_winbond_host].platform_dev = pdev; - - ret = ata_device_add(&ae); - if (ret == 0) { - platform_device_unregister(pdev); - return -ENODEV; - } - winbond_host[nr_winbond_host++] = dev_get_drvdata(&pdev->dev); - } + if (!(reg & (1 << i))) + continue; + + pdev = platform_device_register_simple(DRV_NAME, nr_winbond_host, NULL, 0); + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + + rc = -ENOMEM; + host = ata_host_alloc(&pdev->dev, 1); + if (!host) + goto err_unregister; + + rc = -ENOMEM; + cmd_addr = devm_ioport_map(&pdev->dev, cmd_port, 8); + ctl_addr = devm_ioport_map(&pdev->dev, cmd_port + 0x0206, 1); + if (!cmd_addr || !ctl_addr) + goto err_unregister; + + ap = host->ports[0]; + ap->ops = &winbond_port_ops; + ap->pio_mask = 0x1F; + ap->flags |= ATA_FLAG_SLAVE_POSS; + ap->ioaddr.cmd_addr = cmd_addr; + ap->ioaddr.altstatus_addr = ctl_addr; + ap->ioaddr.ctl_addr = ctl_addr; + ata_std_ports(&ap->ioaddr); + + /* hook in a private data structure per channel */ + host->private_data = &winbond_data[nr_winbond_host]; + winbond_data[nr_winbond_host].config = port; + winbond_data[nr_winbond_host].platform_dev = pdev; + + /* activate */ + rc = ata_host_activate(host, 14 + i, ata_interrupt, 0, + &winbond_sht); + if (rc) + goto err_unregister; + + winbond_host[nr_winbond_host++] = dev_get_drvdata(&pdev->dev); } return 0; + + err_unregister: + platform_device_unregister(pdev); + return rc; } /** diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c index 5dd3ca8b5f29..52b69530ab29 100644 --- a/drivers/ata/pdc_adma.c +++ b/drivers/ata/pdc_adma.c @@ -52,9 +52,9 @@ /* macro to calculate base address for ADMA regs */ #define ADMA_REGS(base,port_no) ((base) + 0x80 + ((port_no) * 0x20)) -/* macro to obtain addresses from ata_host */ -#define ADMA_HOST_REGS(host,port_no) \ - ADMA_REGS((host)->iomap[ADMA_MMIO_BAR], port_no) +/* macro to obtain addresses from ata_port */ +#define ADMA_PORT_REGS(ap) \ + ADMA_REGS((ap)->host->iomap[ADMA_MMIO_BAR], ap->port_no) enum { ADMA_MMIO_BAR = 4, @@ -128,7 +128,6 @@ struct adma_port_priv { static int adma_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); -static irqreturn_t adma_intr (int irq, void *dev_instance); static int adma_port_start(struct ata_port *ap); static void adma_host_stop(struct ata_host *host); static void adma_port_stop(struct ata_port *ap); @@ -172,7 +171,6 @@ static const struct ata_port_operations adma_ata_ops = { .qc_issue = adma_qc_issue, .eng_timeout = adma_eng_timeout, .data_xfer = ata_data_xfer, - .irq_handler = adma_intr, .irq_clear = adma_irq_clear, .irq_on = ata_irq_on, .irq_ack = ata_irq_ack, @@ -186,7 +184,6 @@ static const struct ata_port_operations adma_ata_ops = { static struct ata_port_info adma_port_info[] = { /* board_1841_idx */ { - .sht = &adma_ata_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_PIO_POLLING, @@ -229,8 +226,10 @@ static void adma_irq_clear(struct ata_port *ap) /* nothing */ } -static void adma_reset_engine(void __iomem *chan) +static void adma_reset_engine(struct ata_port *ap) { + void __iomem *chan = ADMA_PORT_REGS(ap); + /* reset ADMA to idle state */ writew(aPIOMD4 | aNIEN | aRSTADM, chan + ADMA_CONTROL); udelay(2); @@ -241,14 +240,14 @@ static void adma_reset_engine(void __iomem *chan) static void adma_reinit_engine(struct ata_port *ap) { struct adma_port_priv *pp = ap->private_data; - void __iomem *chan = ADMA_HOST_REGS(ap->host, ap->port_no); + void __iomem *chan = ADMA_PORT_REGS(ap); /* mask/clear ATA interrupts */ writeb(ATA_NIEN, ap->ioaddr.ctl_addr); ata_check_status(ap); /* reset the ADMA engine */ - adma_reset_engine(chan); + adma_reset_engine(ap); /* set in-FIFO threshold to 0x100 */ writew(0x100, chan + ADMA_FIFO_IN); @@ -268,7 +267,7 @@ static void adma_reinit_engine(struct ata_port *ap) static inline void adma_enter_reg_mode(struct ata_port *ap) { - void __iomem *chan = ADMA_HOST_REGS(ap->host, ap->port_no); + void __iomem *chan = ADMA_PORT_REGS(ap); writew(aPIOMD4, chan + ADMA_CONTROL); readb(chan + ADMA_STATUS); /* flush */ @@ -415,7 +414,7 @@ static void adma_qc_prep(struct ata_queued_cmd *qc) static inline void adma_packet_start(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; - void __iomem *chan = ADMA_HOST_REGS(ap->host, ap->port_no); + void __iomem *chan = ADMA_PORT_REGS(ap); VPRINTK("ENTER, ap %p\n", ap); @@ -453,7 +452,7 @@ static inline unsigned int adma_intr_pkt(struct ata_host *host) struct ata_port *ap = host->ports[port_no]; struct adma_port_priv *pp; struct ata_queued_cmd *qc; - void __iomem *chan = ADMA_HOST_REGS(host, port_no); + void __iomem *chan = ADMA_PORT_REGS(ap); u8 status = readb(chan + ADMA_STATUS); if (status == 0) @@ -575,7 +574,7 @@ static int adma_port_start(struct ata_port *ap) static void adma_port_stop(struct ata_port *ap) { - adma_reset_engine(ADMA_HOST_REGS(ap->host, ap->port_no)); + adma_reset_engine(ap); } static void adma_host_stop(struct ata_host *host) @@ -583,21 +582,19 @@ static void adma_host_stop(struct ata_host *host) unsigned int port_no; for (port_no = 0; port_no < ADMA_PORTS; ++port_no) - adma_reset_engine(ADMA_HOST_REGS(host, port_no)); + adma_reset_engine(host->ports[port_no]); } -static void adma_host_init(unsigned int chip_id, - struct ata_probe_ent *probe_ent) +static void adma_host_init(struct ata_host *host, unsigned int chip_id) { unsigned int port_no; - void __iomem *mmio_base = probe_ent->iomap[ADMA_MMIO_BAR]; /* enable/lock aGO operation */ - writeb(7, mmio_base + ADMA_MODE_LOCK); + writeb(7, host->iomap[ADMA_MMIO_BAR] + ADMA_MODE_LOCK); /* reset the ADMA logic */ for (port_no = 0; port_no < ADMA_PORTS; ++port_no) - adma_reset_engine(ADMA_REGS(mmio_base, port_no)); + adma_reset_engine(host->ports[port_no]); } static int adma_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base) @@ -623,14 +620,21 @@ static int adma_ata_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; - struct ata_probe_ent *probe_ent = NULL; - void __iomem *mmio_base; unsigned int board_idx = (unsigned int) ent->driver_data; + const struct ata_port_info *ppi[] = { &adma_port_info[board_idx], NULL }; + struct ata_host *host; + void __iomem *mmio_base; int rc, port_no; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); + /* alloc host */ + host = ata_host_alloc_pinfo(&pdev->dev, ppi, ADMA_PORTS); + if (!host) + return -ENOMEM; + + /* acquire resources and fill host */ rc = pcim_enable_device(pdev); if (rc) return rc; @@ -641,46 +645,23 @@ static int adma_ata_init_one(struct pci_dev *pdev, rc = pcim_iomap_regions(pdev, 1 << ADMA_MMIO_BAR, DRV_NAME); if (rc) return rc; - mmio_base = pcim_iomap_table(pdev)[ADMA_MMIO_BAR]; + host->iomap = pcim_iomap_table(pdev); + mmio_base = host->iomap[ADMA_MMIO_BAR]; rc = adma_set_dma_masks(pdev, mmio_base); if (rc) return rc; - probe_ent = devm_kzalloc(&pdev->dev, sizeof(*probe_ent), GFP_KERNEL); - if (probe_ent == NULL) - return -ENOMEM; - - probe_ent->dev = pci_dev_to_dev(pdev); - INIT_LIST_HEAD(&probe_ent->node); - - probe_ent->sht = adma_port_info[board_idx].sht; - probe_ent->port_flags = adma_port_info[board_idx].flags; - probe_ent->pio_mask = adma_port_info[board_idx].pio_mask; - probe_ent->mwdma_mask = adma_port_info[board_idx].mwdma_mask; - probe_ent->udma_mask = adma_port_info[board_idx].udma_mask; - probe_ent->port_ops = adma_port_info[board_idx].port_ops; - - probe_ent->irq = pdev->irq; - probe_ent->irq_flags = IRQF_SHARED; - probe_ent->n_ports = ADMA_PORTS; - probe_ent->iomap = pcim_iomap_table(pdev); - - for (port_no = 0; port_no < probe_ent->n_ports; ++port_no) { - adma_ata_setup_port(&probe_ent->port[port_no], + for (port_no = 0; port_no < ADMA_PORTS; ++port_no) + adma_ata_setup_port(&host->ports[port_no]->ioaddr, ADMA_ATA_REGS(mmio_base, port_no)); - } - - pci_set_master(pdev); /* initialize adapter */ - adma_host_init(board_idx, probe_ent); + adma_host_init(host, board_idx); - if (!ata_device_add(probe_ent)) - return -ENODEV; - - devm_kfree(&pdev->dev, probe_ent); - return 0; + pci_set_master(pdev); + return ata_host_activate(host, pdev->irq, adma_intr, IRQF_SHARED, + &adma_ata_sht); } static int __init adma_ata_init(void) -- cgit v1.2.2