From 95006188cb1399f1358330503906e5891c129a10 Mon Sep 17 00:00:00 2001 From: Mikael Pettersson Date: Tue, 9 Jan 2007 10:51:46 +0100 Subject: sata_promise: ATAPI support This patch adds ATAPI support to the sata_promise driver. This has been tested on both first- and second-generation chips (20378 and 20575), and with both SATAPI and PATAPI devices. CD-writing works. SATAPI DMA works on second-generation chips, but on first-generation chips SATAPI is limited to PIO due to what appears to be HW limitations. PATAPI DMA works on both first- and second-generation chips, but requires the separate PATA support patch before it can be used on TX2plus chips. The functional changes to the driver are: - remove ATA_FLAG_NO_ATAPI from PDC_COMMON_FLAGS - add ->check_atapi_dma() operation to enable DMA for bulk data transfers but force PIO for other ATAPI commands; this filter is from Promise's driver and largely matches pata_pdc207x.c - use a more restrictive ->check_atapi_dma() on first-generation chips to force SATAPI to always use PIO - add handling of ATAPI protocols to pdc_qc_prep(), pdc_host_intr(), and pdc_qc_issue_prot(): ATAPI_DMA is handled by the driver while non-DMA protocols are handed over to libata generic code - add pdc_issue_atapi_pkt_cmd() to handle the initial steps in issuing ATAPI DMA commands before sending the actual CDB; this procedure was ported from Promise's driver Signed-off-by: Mikael Pettersson Signed-off-by: Jeff Garzik --- drivers/ata/sata_promise.c | 222 +++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 215 insertions(+), 7 deletions(-) (limited to 'drivers/ata/sata_promise.c') diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c index 6ab057417386..9bd195fbd884 100644 --- a/drivers/ata/sata_promise.c +++ b/drivers/ata/sata_promise.c @@ -39,6 +39,7 @@ #include #include #include +#include #include #include #include @@ -50,6 +51,14 @@ enum { + /* register offsets */ + PDC_FEATURE = 0x04, /* Feature/Error reg (per port) */ + PDC_SECTOR_COUNT = 0x08, /* Sector count reg (per port) */ + PDC_SECTOR_NUMBER = 0x0C, /* Sector number reg (per port) */ + PDC_CYLINDER_LOW = 0x10, /* Cylinder low reg (per port) */ + PDC_CYLINDER_HIGH = 0x14, /* Cylinder high reg (per port) */ + PDC_DEVICE = 0x18, /* Device/Head reg (per port) */ + PDC_COMMAND = 0x1C, /* Command/status reg (per port) */ PDC_PKT_SUBMIT = 0x40, /* Command packet pointer addr */ PDC_INT_SEQMASK = 0x40, /* Mask of asserted SEQ INTs */ PDC_FLASH_CTL = 0x44, /* Flash control register */ @@ -71,13 +80,23 @@ enum { PDC_HAS_PATA = (1 << 1), /* PDC20375/20575 has PATA */ + /* Sequence counter control registers bit definitions */ + PDC_SEQCNTRL_INT_MASK = (1 << 5), /* Sequence Interrupt Mask */ + + /* Feature register values */ + PDC_FEATURE_ATAPI_PIO = 0x00, /* ATAPI data xfer by PIO */ + PDC_FEATURE_ATAPI_DMA = 0x01, /* ATAPI data xfer by DMA */ + + /* Device/Head register values */ + PDC_DEVICE_SATA = 0xE0, /* Device/Head value for SATA devices */ + /* PDC_CTLSTAT bit definitions */ PDC_DMA_ENABLE = (1 << 7), PDC_IRQ_DISABLE = (1 << 10), PDC_RESET = (1 << 11), /* HDMA reset */ PDC_COMMON_FLAGS = ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI | + ATA_FLAG_MMIO | ATA_FLAG_PIO_POLLING, /* hp->flags bits */ @@ -106,6 +125,8 @@ static void pdc_pata_phy_reset(struct ata_port *ap); static void pdc_qc_prep(struct ata_queued_cmd *qc); static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf); static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf); +static int pdc_check_atapi_dma(struct ata_queued_cmd *qc); +static int pdc_old_check_atapi_dma(struct ata_queued_cmd *qc); static void pdc_irq_clear(struct ata_port *ap); static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc); static void pdc_host_stop(struct ata_host *host); @@ -140,6 +161,34 @@ static const struct ata_port_operations pdc_sata_ops = { .check_status = ata_check_status, .exec_command = pdc_exec_command_mmio, .dev_select = ata_std_dev_select, + .check_atapi_dma = pdc_check_atapi_dma, + + .qc_prep = pdc_qc_prep, + .qc_issue = pdc_qc_issue_prot, + .freeze = pdc_freeze, + .thaw = pdc_thaw, + .error_handler = pdc_error_handler, + .post_internal_cmd = pdc_post_internal_cmd, + .data_xfer = ata_mmio_data_xfer, + .irq_handler = pdc_interrupt, + .irq_clear = pdc_irq_clear, + + .scr_read = pdc_sata_scr_read, + .scr_write = pdc_sata_scr_write, + .port_start = pdc_port_start, + .port_stop = pdc_port_stop, + .host_stop = pdc_host_stop, +}; + +/* First-generation chips need a more restrictive ->check_atapi_dma op */ +static const struct ata_port_operations pdc_old_sata_ops = { + .port_disable = ata_port_disable, + .tf_load = pdc_tf_load_mmio, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = pdc_exec_command_mmio, + .dev_select = ata_std_dev_select, + .check_atapi_dma = pdc_old_check_atapi_dma, .qc_prep = pdc_qc_prep, .qc_issue = pdc_qc_issue_prot, @@ -165,6 +214,7 @@ static const struct ata_port_operations pdc_pata_ops = { .check_status = ata_check_status, .exec_command = pdc_exec_command_mmio, .dev_select = ata_std_dev_select, + .check_atapi_dma = pdc_check_atapi_dma, .phy_reset = pdc_pata_phy_reset, @@ -188,7 +238,7 @@ static const struct ata_port_info pdc_port_info[] = { .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 ; FIXME */ - .port_ops = &pdc_sata_ops, + .port_ops = &pdc_old_sata_ops, }, /* board_20319 */ @@ -198,7 +248,7 @@ static const struct ata_port_info pdc_port_info[] = { .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 ; FIXME */ - .port_ops = &pdc_sata_ops, + .port_ops = &pdc_old_sata_ops, }, /* board_20619 */ @@ -397,6 +447,30 @@ static void pdc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg, writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); } +static void pdc_atapi_dma_pkt(struct ata_taskfile *tf, + dma_addr_t sg_table, + unsigned int cdb_len, u8 *cdb, + u8 *buf) +{ + u32 *buf32 = (u32 *) buf; + + /* set control bits (byte 0), zero delay seq id (byte 3), + * and seq id (byte 2) + */ + if (!(tf->flags & ATA_TFLAG_WRITE)) + buf32[0] = cpu_to_le32(PDC_PKT_READ); + else + buf32[0] = 0; + buf32[1] = cpu_to_le32(sg_table); /* S/G table addr */ + buf32[2] = 0; /* no next-packet */ + + /* we can represent cdb lengths 2/4/6/8/10/12/14/16 */ + BUG_ON(cdb_len & ~0x1E); + + buf[12] = (((cdb_len >> 1) & 7) << 5) | ATA_REG_DATA | PDC_LAST_REG; + memcpy(buf+13, cdb, cdb_len); +} + static void pdc_qc_prep(struct ata_queued_cmd *qc) { struct pdc_port_priv *pp = qc->ap->private_data; @@ -421,6 +495,16 @@ static void pdc_qc_prep(struct ata_queued_cmd *qc) pdc_pkt_footer(&qc->tf, pp->pkt, i); break; + case ATA_PROT_ATAPI: + case ATA_PROT_ATAPI_NODATA: + ata_qc_prep(qc); + break; + + case ATA_PROT_ATAPI_DMA: + ata_qc_prep(qc); + pdc_atapi_dma_pkt(&qc->tf, qc->ap->prd_dma, qc->dev->cdb_len, qc->cdb, pp->pkt); + break; + default: break; } @@ -534,6 +618,7 @@ static inline unsigned int pdc_host_intr( struct ata_port *ap, switch (qc->tf.protocol) { case ATA_PROT_DMA: case ATA_PROT_NODATA: + case ATA_PROT_ATAPI_DMA: qc->err_mask |= ac_err_mask(ata_wait_idle(ap)); ata_qc_complete(qc); handled = 1; @@ -630,18 +715,105 @@ static inline void pdc_packet_start(struct ata_queued_cmd *qc) readl((void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); /* flush */ } +static unsigned int pdc_wait_for_drq(struct ata_port *ap) +{ + void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; + unsigned int i; + unsigned int status; + + /* Following pdc-ultra's WaitForDrq() we loop here until BSY + * is clear and DRQ is set in altstatus. We could possibly call + * ata_busy_wait() and loop until DRQ is set, but since we don't + * know how much time a call to ata_busy_wait() took, we don't + * know when to time out the outer loop. + */ + for(i = 0; i < 1000; ++i) { + status = readb(port_mmio + 0x38); /* altstatus */ + if (status == 0xFF) + break; + if (status & ATA_BUSY) + ; + else if (status & (ATA_DRQ | ATA_ERR)) + break; + mdelay(1); + } + if (i >= 1000) + ata_port_printk(ap, KERN_WARNING, "%s timed out", __FUNCTION__); + return status; +} + +static void pdc_issue_atapi_pkt_cmd(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; + void __iomem *host_mmio = ap->host->mmio_base; + unsigned int nbytes; + unsigned int tmp; + + writeb(0x00, port_mmio + PDC_CTLSTAT); /* route drive INT to SEQ 0 */ + writeb(PDC_SEQCNTRL_INT_MASK, host_mmio + 0); /* but mask SEQ 0 INT */ + + /* select drive */ + if (sata_scr_valid(ap)) { + tmp = PDC_DEVICE_SATA; + } else { + tmp = ATA_DEVICE_OBS; + if (qc->dev->devno != 0) + tmp |= ATA_DEV1; + } + writeb(tmp, port_mmio + PDC_DEVICE); + ata_busy_wait(ap, ATA_BUSY, 1000); + + writeb(0x00, port_mmio + PDC_SECTOR_COUNT); + writeb(0x00, port_mmio + PDC_SECTOR_NUMBER); + + /* set feature and byte counter registers */ + if (qc->tf.protocol != ATA_PROT_ATAPI_DMA) { + tmp = PDC_FEATURE_ATAPI_PIO; + /* set byte counter register to real transfer byte count */ + nbytes = qc->nbytes; + if (!nbytes) + nbytes = qc->nsect << 9; + if (nbytes > 0xffff) + nbytes = 0xffff; + } else { + tmp = PDC_FEATURE_ATAPI_DMA; + /* set byte counter register to 0 */ + nbytes = 0; + } + writeb(tmp, port_mmio + PDC_FEATURE); + writeb(nbytes & 0xFF, port_mmio + PDC_CYLINDER_LOW); + writeb((nbytes >> 8) & 0xFF, port_mmio + PDC_CYLINDER_HIGH); + + /* send ATAPI packet command 0xA0 */ + writeb(ATA_CMD_PACKET, port_mmio + PDC_COMMAND); + + /* + * At this point in the issuing of a packet command, the Promise + * driver busy-waits for INT (CTLSTAT bit 27) if it detected + * (at port init time) that the device interrupts with assertion + * of DRQ after receiving a packet command. + * + * XXX: Do we need to handle this case as well? Does libata detect + * this case for us, or do we have to do our own per-port init? + */ + + pdc_wait_for_drq(ap); + + /* now the device only waits for the CDB */ +} + static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc) { switch (qc->tf.protocol) { + case ATA_PROT_ATAPI_DMA: + pdc_issue_atapi_pkt_cmd(qc); + /*FALLTHROUGH*/ case ATA_PROT_DMA: case ATA_PROT_NODATA: pdc_packet_start(qc); return 0; - case ATA_PROT_ATAPI_DMA: - BUG(); - break; - default: break; } @@ -664,6 +836,42 @@ static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile ata_exec_command(ap, tf); } +static int pdc_check_atapi_dma(struct ata_queued_cmd *qc) +{ + u8 *scsicmd = qc->scsicmd->cmnd; + int pio = 1; /* atapi dma off by default */ + + /* Whitelist commands that may use DMA. */ + switch (scsicmd[0]) { + case WRITE_12: + case WRITE_10: + case WRITE_6: + case READ_12: + case READ_10: + case READ_6: + case 0xad: /* READ_DVD_STRUCTURE */ + case 0xbe: /* READ_CD */ + pio = 0; + } + /* -45150 (FFFF4FA2) to -1 (FFFFFFFF) shall use PIO mode */ + if (scsicmd[0] == WRITE_10) { + unsigned int lba; + lba = (scsicmd[2] << 24) | (scsicmd[3] << 16) | (scsicmd[4] << 8) | scsicmd[5]; + if (lba >= 0xFFFF4FA2) + pio = 1; + } + return pio; +} + +static int pdc_old_check_atapi_dma(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + /* First generation chips cannot use ATAPI DMA on SATA ports */ + if (sata_scr_valid(ap)) + return 1; + return pdc_check_atapi_dma(qc); +} static void pdc_ata_setup_port(struct ata_ioports *port, unsigned long base) { -- cgit v1.2.2