From 6bd99b4e0998571808fc1f09d5162348f21ff8c1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 25 Mar 2008 12:22:48 +0900 Subject: libata: normalize port_info, port_operations and sht tables Over the time, port info, ops and sht structures developed quite a bit of inconsistencies. This patch updates drivers. * Enable/disable_pm callbacks added to all ahci ops tables. * Every driver for SFF controllers now uses ata_sff_port_start() instead of ata_port_start() unless the driver has custom implementation. * Every driver for SFF controllers now uses ata_pci_default_filter() unless the driver has custom implementation. * Removed an odd port_info->sht initialization from ata_piix.c. Likely a merge byproduct. * A port which has ATA_FLAG_SATA set doesn't need to set cable_detect to ata_cable_sata(). Remove it from via and mv port ops. * Some drivers had unnecessary .max_sectors initialization which is ignored and was missing .slave_destroy callback. Fixed. * Removed unnecessary sht initializations port_info's. * Removed onsolete scsi device suspend/resume callbacks from pata_bf54x. * No reason to set ata_pci_default_filter() and bmdma functions for PIO-only drivers. Remove those callbacks and replace ata_bmdma_irq_clear with ata_noop_irq_clear. * pata_platform sets port_start to ata_dummy_ret0. port_start can just be set to NULL. * sata_fsl supports NCQ but was missing qc_defer. Fixed. * pata_rb600_cf implements dummy port_start. Removed. Signed-off-by: Tejun Heo --- drivers/ata/pata_bf54x.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/ata/pata_bf54x.c') diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c index 7f87f105c2f6..146c202d5834 100644 --- a/drivers/ata/pata_bf54x.c +++ b/drivers/ata/pata_bf54x.c @@ -1409,7 +1409,6 @@ static const struct ata_port_operations bfin_pata_ops = { static struct ata_port_info bfin_port_info[] = { { - .sht = &bfin_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY, -- cgit v1.2.2 From 68d1d07b510bb57a504588adc2bd2758adea0965 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 25 Mar 2008 12:22:49 +0900 Subject: libata: implement and use SHT initializers libata lets low level drivers build scsi_host_template and register it to the SCSI layer. This allows low level drivers high level of flexibility but also burdens them with lots of boilerplate entries. This patch implements SHT initializers which can be used to initialize all the boilerplate entries in a sht. Three variants of them are implemented - BASE, BMDMA and NCQ - for different types of drivers. Note that entries can be overriden by putting individual initializers after the helper macro. All sht tables are identical before and after this patch. Signed-off-by: Tejun Heo --- drivers/ata/pata_bf54x.c | 14 +------------- 1 file changed, 1 insertion(+), 13 deletions(-) (limited to 'drivers/ata/pata_bf54x.c') diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c index 146c202d5834..6c75fcac3cf4 100644 --- a/drivers/ata/pata_bf54x.c +++ b/drivers/ata/pata_bf54x.c @@ -1357,21 +1357,9 @@ static int bfin_port_start(struct ata_port *ap) } static struct scsi_host_template bfin_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, - .this_id = ATA_SHT_THIS_ID, + ATA_BASE_SHT(DRV_NAME), .sg_tablesize = SG_NONE, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = ATA_SHT_USE_CLUSTERING, - .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, - .bios_param = ata_std_bios_param, }; static const struct ata_port_operations bfin_pata_ops = { -- cgit v1.2.2 From 029cfd6b74fc5c517865fad78cf4a3ea8d9b664a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 25 Mar 2008 12:22:49 +0900 Subject: libata: implement and use ops inheritance libata lets low level drivers build ata_port_operations table and register it with libata core layer. This allows low level drivers high level of flexibility but also burdens them with lots of boilerplate entries. This becomes worse for drivers which support related similar controllers which differ slightly. They share most of the operations except for a few. However, the driver still needs to list all operations for each variant. This results in large number of duplicate entries, which is not only inefficient but also error-prone as it becomes very difficult to tell what the actual differences are. This duplicate boilerplates all over the low level drivers also make updating the core layer exteremely difficult and error-prone. When compounded with multi-branched development model, it ends up accumulating inconsistencies over time. Some of those inconsistencies cause immediate problems and fixed. Others just remain there dormant making maintenance increasingly difficult. To rectify the problem, this patch implements ata_port_operations inheritance. To allow LLDs to easily re-use their own ops tables overriding only specific methods, this patch implements poor man's class inheritance. An ops table has ->inherits field which can be set to any ops table as long as it doesn't create a loop. When the host is started, the inheritance chain is followed and any operation which isn't specified is taken from the nearest ancestor which has it specified. This operation is called finalization and done only once per an ops table and the LLD doesn't have to do anything special about it other than making the ops table non-const such that libata can update it. libata provides four base ops tables lower drivers can inherit from - base, sata, pmp, sff and bmdma. To avoid overriding these ops accidentaly, these ops are declared const and LLDs should always inherit these instead of using them directly. After finalization, all the ops table are identical before and after the patch except for setting .irq_handler to ata_interrupt in drivers which didn't use to. The .irq_handler doesn't have any actual effect and the field will soon be removed by later patch. * sata_sx4 is still using old style EH and currently doesn't take advantage of ops inheritance. Signed-off-by: Tejun Heo --- drivers/ata/pata_bf54x.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/ata/pata_bf54x.c') diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c index 6c75fcac3cf4..7a22ef483061 100644 --- a/drivers/ata/pata_bf54x.c +++ b/drivers/ata/pata_bf54x.c @@ -1363,6 +1363,8 @@ static struct scsi_host_template bfin_sht = { }; static const struct ata_port_operations bfin_pata_ops = { + .inherits = &ata_sff_port_ops, + .set_piomode = bfin_set_piomode, .set_dmamode = bfin_set_dmamode, @@ -1380,14 +1382,12 @@ static const struct ata_port_operations bfin_pata_ops = { .data_xfer = bfin_data_xfer, .qc_prep = ata_noop_qc_prep, - .qc_issue = ata_qc_issue_prot, .freeze = bfin_bmdma_freeze, .thaw = bfin_bmdma_thaw, .error_handler = bfin_error_handler, .post_internal_cmd = bfin_bmdma_stop, - .irq_handler = ata_interrupt, .irq_clear = bfin_irq_clear, .irq_on = bfin_irq_on, -- cgit v1.2.2 From a1efdaba2dbd6fb89e23a87b66d3f4dd92c9f5af Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 25 Mar 2008 12:22:50 +0900 Subject: libata: make reset related methods proper port operations Currently reset methods are not specified directly in the ata_port_operations table. If a LLD wants to use custom reset methods, it should construct and use a error_handler which uses those reset methods. It's done this way for two reasons. First, the ops table already contained too many methods and adding four more of them would noticeably increase the amount of necessary boilerplate code all over low level drivers. Second, as ->error_handler uses those reset methods, it can get confusing. ie. By overriding ->error_handler, those reset ops can be made useless making layering a bit hazy. Now that ops table uses inheritance, the first problem doesn't exist anymore. The second isn't completely solved but is relieved by providing default values - most drivers can just override what it has implemented and don't have to concern itself about higher level callbacks. In fact, there currently is no driver which actually modifies error handling behavior. Drivers which override ->error_handler just wraps the standard error handler only to prepare the controller for EH. I don't think making ops layering strict has any noticeable benefit. This patch makes ->prereset, ->softreset, ->hardreset, ->postreset and their PMP counterparts propoer ops. Default ops are provided in the base ops tables and drivers are converted to override individual reset methods instead of creating custom error_handler. * ata_std_error_handler() doesn't use sata_std_hardreset() if SCRs aren't accessible. sata_promise doesn't need to use separate error_handlers for PATA and SATA anymore. * softreset is broken for sata_inic162x and sata_sx4. As libata now always prefers hardreset, this doesn't really matter but the ops are forced to NULL using ATA_OP_NULL for documentation purpose. * pata_hpt374 needs to use different prereset for the first and second PCI functions. This used to be done by branching from hpt374_error_handler(). The proper way to do this is to use separate ops and port_info tables for each function. Converted. Signed-off-by: Tejun Heo --- drivers/ata/pata_bf54x.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-) (limited to 'drivers/ata/pata_bf54x.c') diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c index 7a22ef483061..eea275acb2a8 100644 --- a/drivers/ata/pata_bf54x.c +++ b/drivers/ata/pata_bf54x.c @@ -1314,17 +1314,6 @@ static void bfin_std_postreset(struct ata_link *link, unsigned int *classes) write_atapi_register(base, ATA_REG_CTRL, ap->ctl); } -/** - * bfin_error_handler - Stock error handler for DMA controller - * @ap: port to handle error for - */ - -static void bfin_error_handler(struct ata_port *ap) -{ - ata_bmdma_drive_eh(ap, ata_std_prereset, bfin_std_softreset, NULL, - bfin_std_postreset); -} - static void bfin_port_stop(struct ata_port *ap) { dev_dbg(ap->dev, "in atapi port stop\n"); @@ -1385,7 +1374,8 @@ static const struct ata_port_operations bfin_pata_ops = { .freeze = bfin_bmdma_freeze, .thaw = bfin_bmdma_thaw, - .error_handler = bfin_error_handler, + .softreset = bfin_std_softreset, + .postreset = bfin_std_postreset, .post_internal_cmd = bfin_bmdma_stop, .irq_clear = bfin_irq_clear, -- cgit v1.2.2 From 6fd36390117f7844ad147377878ddb52088f583a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 25 Mar 2008 22:16:44 +0900 Subject: libata: kill ata_chk_status() ata_chk_status() just calls ops->check_status and it only adds confusion with other status functions. Kill it. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/pata_bf54x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/ata/pata_bf54x.c') diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c index eea275acb2a8..457ac800cd5e 100644 --- a/drivers/ata/pata_bf54x.c +++ b/drivers/ata/pata_bf54x.c @@ -1264,7 +1264,7 @@ static void bfin_bmdma_freeze(struct ata_port *ap) * ATA_NIEN manipulation. Also, many controllers fail to mask * previously pending IRQ on ATA_NIEN assertion. Clear it. */ - ata_chk_status(ap); + ap->ops->check_status(ap); bfin_irq_clear(ap); } -- cgit v1.2.2 From 9363c3825ea9ad76561eb48a395349dd29211ed6 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 7 Apr 2008 22:47:16 +0900 Subject: libata: rename SFF functions SFF functions have confusing names. Some have sff prefix, some have bmdma, some std, some pci and some none. Unify the naming by... * SFF functions which are common to both BMDMA and non-BMDMA are prefixed with ata_sff_. * SFF functions which are specific to BMDMA are prefixed with ata_bmdma_. * SFF functions which are specific to PCI but apply to both BMDMA and non-BMDMA are prefixed with ata_pci_sff_. * SFF functions which are specific to PCI and BMDMA are prefixed with ata_pci_bmdma_. * Drop generic prefixes from LLD specific routines. For example, bfin_std_dev_select -> bfin_dev_select. The following renames are noteworthy. ata_qc_issue_prot() -> ata_sff_qc_issue() ata_pci_default_filter() -> ata_bmdma_mode_filter() ata_dev_try_classify() -> ata_sff_dev_classify() This rename is in preparation of separating SFF support out of libata core layer. This patch strictly renames functions and doesn't introduce any behavior difference. Signed-off-by: Tejun Heo --- drivers/ata/pata_bf54x.c | 84 ++++++++++++++++++++++++------------------------ 1 file changed, 42 insertions(+), 42 deletions(-) (limited to 'drivers/ata/pata_bf54x.c') diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c index 457ac800cd5e..c854e882d4a9 100644 --- a/drivers/ata/pata_bf54x.c +++ b/drivers/ata/pata_bf54x.c @@ -674,7 +674,7 @@ static void read_atapi_data(void __iomem *base, * @ap: Port to which output is sent * @tf: ATA taskfile register set * - * Note: Original code is ata_tf_load(). + * Note: Original code is ata_sff_tf_load(). */ static void bfin_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) @@ -745,7 +745,7 @@ static u8 bfin_check_status(struct ata_port *ap) * @ap: Port from which input is read * @tf: ATA taskfile register set for storing input * - * Note: Original code is ata_tf_read(). + * Note: Original code is ata_sff_tf_read(). */ static void bfin_tf_read(struct ata_port *ap, struct ata_taskfile *tf) @@ -775,7 +775,7 @@ static void bfin_tf_read(struct ata_port *ap, struct ata_taskfile *tf) * @ap: port to which command is being issued * @tf: ATA taskfile register set * - * Note: Original code is ata_exec_command(). + * Note: Original code is ata_sff_exec_command(). */ static void bfin_exec_command(struct ata_port *ap, @@ -785,7 +785,7 @@ static void bfin_exec_command(struct ata_port *ap, dev_dbg(ap->dev, "ata%u: cmd 0x%X\n", ap->print_id, tf->command); write_atapi_register(base, ATA_REG_CMD, tf->command); - ata_pause(ap); + ata_sff_pause(ap); } /** @@ -800,14 +800,14 @@ static u8 bfin_check_altstatus(struct ata_port *ap) } /** - * bfin_std_dev_select - Select device 0/1 on ATA bus + * bfin_dev_select - Select device 0/1 on ATA bus * @ap: ATA channel to manipulate * @device: ATA device (numbered from zero) to select * - * Note: Original code is ata_std_dev_select(). + * Note: Original code is ata_sff_dev_select(). */ -static void bfin_std_dev_select(struct ata_port *ap, unsigned int device) +static void bfin_dev_select(struct ata_port *ap, unsigned int device) { void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; u8 tmp; @@ -818,7 +818,7 @@ static void bfin_std_dev_select(struct ata_port *ap, unsigned int device) tmp = ATA_DEVICE_OBS | ATA_DEV1; write_atapi_register(base, ATA_REG_DEVICE, tmp); - ata_pause(ap); + ata_sff_pause(ap); } /** @@ -977,7 +977,7 @@ static unsigned int bfin_devchk(struct ata_port *ap, void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; u8 nsect, lbal; - bfin_std_dev_select(ap, device); + bfin_dev_select(ap, device); write_atapi_register(base, ATA_REG_NSECT, 0x55); write_atapi_register(base, ATA_REG_LBAL, 0xaa); @@ -1014,7 +1014,7 @@ static void bfin_bus_post_reset(struct ata_port *ap, unsigned int devmask) * BSY bit to clear */ if (dev0) - ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); + ata_sff_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); /* if device 1 was found in ata_devchk, wait for * register access, then wait for BSY to clear @@ -1023,7 +1023,7 @@ static void bfin_bus_post_reset(struct ata_port *ap, unsigned int devmask) while (dev1) { u8 nsect, lbal; - bfin_std_dev_select(ap, 1); + bfin_dev_select(ap, 1); nsect = read_atapi_register(base, ATA_REG_NSECT); lbal = read_atapi_register(base, ATA_REG_LBAL); if ((nsect == 1) && (lbal == 1)) @@ -1035,14 +1035,14 @@ static void bfin_bus_post_reset(struct ata_port *ap, unsigned int devmask) msleep(50); /* give drive a breather */ } if (dev1) - ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); + ata_sff_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); /* is all this really necessary? */ - bfin_std_dev_select(ap, 0); + bfin_dev_select(ap, 0); if (dev1) - bfin_std_dev_select(ap, 1); + bfin_dev_select(ap, 1); if (dev0) - bfin_std_dev_select(ap, 0); + bfin_dev_select(ap, 0); } /** @@ -1088,15 +1088,15 @@ static unsigned int bfin_bus_softreset(struct ata_port *ap, } /** - * bfin_std_softreset - reset host port via ATA SRST + * bfin_softreset - reset host port via ATA SRST * @ap: port to reset * @classes: resulting classes of attached devices * - * Note: Original code is ata_std_softreset(). + * Note: Original code is ata_sff_softreset(). */ -static int bfin_std_softreset(struct ata_link *link, unsigned int *classes, - unsigned long deadline) +static int bfin_softreset(struct ata_link *link, unsigned int *classes, + unsigned long deadline) { struct ata_port *ap = link->ap; unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; @@ -1115,7 +1115,7 @@ static int bfin_std_softreset(struct ata_link *link, unsigned int *classes, devmask |= (1 << 1); /* select device 0 again */ - bfin_std_dev_select(ap, 0); + bfin_dev_select(ap, 0); /* issue bus reset */ err_mask = bfin_bus_softreset(ap, devmask); @@ -1126,10 +1126,10 @@ static int bfin_std_softreset(struct ata_link *link, unsigned int *classes, } /* determine by signature whether we have ATA or ATAPI devices */ - classes[0] = ata_dev_try_classify(&ap->link.device[0], + classes[0] = ata_sff_dev_classify(&ap->link.device[0], devmask & (1 << 0), &err); if (slave_possible && err != 0x81) - classes[1] = ata_dev_try_classify(&ap->link.device[1], + classes[1] = ata_sff_dev_classify(&ap->link.device[1], devmask & (1 << 1), &err); out: @@ -1167,7 +1167,7 @@ static unsigned char bfin_bmdma_status(struct ata_port *ap) * @buflen: buffer length * @write_data: read/write * - * Note: Original code is ata_data_xfer(). + * Note: Original code is ata_sff_data_xfer(). */ static unsigned int bfin_data_xfer(struct ata_device *dev, unsigned char *buf, @@ -1206,7 +1206,7 @@ static unsigned int bfin_data_xfer(struct ata_device *dev, unsigned char *buf, * bfin_irq_clear - Clear ATAPI interrupt. * @ap: Port associated with this ATA transaction. * - * Note: Original code is ata_bmdma_irq_clear(). + * Note: Original code is ata_sff_irq_clear(). */ static void bfin_irq_clear(struct ata_port *ap) @@ -1223,7 +1223,7 @@ static void bfin_irq_clear(struct ata_port *ap) * bfin_irq_on - Enable interrupts on a port. * @ap: Port on which interrupts are enabled. * - * Note: Original code is ata_irq_on(). + * Note: Original code is ata_sff_irq_on(). */ static unsigned char bfin_irq_on(struct ata_port *ap) @@ -1244,13 +1244,13 @@ static unsigned char bfin_irq_on(struct ata_port *ap) } /** - * bfin_bmdma_freeze - Freeze DMA controller port + * bfin_freeze - Freeze DMA controller port * @ap: port to freeze * - * Note: Original code is ata_bmdma_freeze(). + * Note: Original code is ata_sff_freeze(). */ -static void bfin_bmdma_freeze(struct ata_port *ap) +static void bfin_freeze(struct ata_port *ap) { void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; @@ -1270,13 +1270,13 @@ static void bfin_bmdma_freeze(struct ata_port *ap) } /** - * bfin_bmdma_thaw - Thaw DMA controller port + * bfin_thaw - Thaw DMA controller port * @ap: port to thaw * - * Note: Original code is ata_bmdma_thaw(). + * Note: Original code is ata_sff_thaw(). */ -void bfin_bmdma_thaw(struct ata_port *ap) +void bfin_thaw(struct ata_port *ap) { bfin_check_status(ap); bfin_irq_clear(ap); @@ -1284,14 +1284,14 @@ void bfin_bmdma_thaw(struct ata_port *ap) } /** - * bfin_std_postreset - standard postreset callback + * bfin_postreset - standard postreset callback * @ap: the target ata_port * @classes: classes of attached devices * - * Note: Original code is ata_std_postreset(). + * Note: Original code is ata_sff_postreset(). */ -static void bfin_std_postreset(struct ata_link *link, unsigned int *classes) +static void bfin_postreset(struct ata_link *link, unsigned int *classes) { struct ata_port *ap = link->ap; void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; @@ -1301,9 +1301,9 @@ static void bfin_std_postreset(struct ata_link *link, unsigned int *classes) /* is double-select really necessary? */ if (classes[0] != ATA_DEV_NONE) - bfin_std_dev_select(ap, 1); + bfin_dev_select(ap, 1); if (classes[1] != ATA_DEV_NONE) - bfin_std_dev_select(ap, 0); + bfin_dev_select(ap, 0); /* bail out if no device is present */ if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) { @@ -1362,7 +1362,7 @@ static const struct ata_port_operations bfin_pata_ops = { .exec_command = bfin_exec_command, .check_status = bfin_check_status, .check_altstatus = bfin_check_altstatus, - .dev_select = bfin_std_dev_select, + .dev_select = bfin_dev_select, .bmdma_setup = bfin_bmdma_setup, .bmdma_start = bfin_bmdma_start, @@ -1372,10 +1372,10 @@ static const struct ata_port_operations bfin_pata_ops = { .qc_prep = ata_noop_qc_prep, - .freeze = bfin_bmdma_freeze, - .thaw = bfin_bmdma_thaw, - .softreset = bfin_std_softreset, - .postreset = bfin_std_postreset, + .freeze = bfin_freeze, + .thaw = bfin_thaw, + .softreset = bfin_softreset, + .postreset = bfin_postreset, .post_internal_cmd = bfin_bmdma_stop, .irq_clear = bfin_irq_clear, @@ -1513,7 +1513,7 @@ static int __devinit bfin_atapi_probe(struct platform_device *pdev) } if (ata_host_activate(host, platform_get_irq(pdev, 0), - ata_interrupt, IRQF_SHARED, &bfin_sht) != 0) { + ata_sff_interrupt, IRQF_SHARED, &bfin_sht) != 0) { peripheral_free_list(atapi_io_port); dev_err(&pdev->dev, "Fail to attach ATAPI device\n"); return -ENODEV; -- cgit v1.2.2 From 5682ed33aae05d10a25c95633ef9d9c062825888 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 7 Apr 2008 22:47:16 +0900 Subject: libata: rename SFF port ops Add sff_ prefix to SFF specific port ops. This rename is in preparation of separating SFF support out of libata core layer. This patch strictly renames ops and doesn't introduce any behavior difference. Signed-off-by: Tejun Heo --- drivers/ata/pata_bf54x.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers/ata/pata_bf54x.c') diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c index c854e882d4a9..d98bd7455e6b 100644 --- a/drivers/ata/pata_bf54x.c +++ b/drivers/ata/pata_bf54x.c @@ -1264,7 +1264,7 @@ static void bfin_freeze(struct ata_port *ap) * ATA_NIEN manipulation. Also, many controllers fail to mask * previously pending IRQ on ATA_NIEN assertion. Clear it. */ - ap->ops->check_status(ap); + ap->ops->sff_check_status(ap); bfin_irq_clear(ap); } @@ -1357,18 +1357,18 @@ static const struct ata_port_operations bfin_pata_ops = { .set_piomode = bfin_set_piomode, .set_dmamode = bfin_set_dmamode, - .tf_load = bfin_tf_load, - .tf_read = bfin_tf_read, - .exec_command = bfin_exec_command, - .check_status = bfin_check_status, - .check_altstatus = bfin_check_altstatus, - .dev_select = bfin_dev_select, + .sff_tf_load = bfin_tf_load, + .sff_tf_read = bfin_tf_read, + .sff_exec_command = bfin_exec_command, + .sff_check_status = bfin_check_status, + .sff_check_altstatus = bfin_check_altstatus, + .sff_dev_select = bfin_dev_select, .bmdma_setup = bfin_bmdma_setup, .bmdma_start = bfin_bmdma_start, .bmdma_stop = bfin_bmdma_stop, .bmdma_status = bfin_bmdma_status, - .data_xfer = bfin_data_xfer, + .sff_data_xfer = bfin_data_xfer, .qc_prep = ata_noop_qc_prep, @@ -1378,8 +1378,8 @@ static const struct ata_port_operations bfin_pata_ops = { .postreset = bfin_postreset, .post_internal_cmd = bfin_bmdma_stop, - .irq_clear = bfin_irq_clear, - .irq_on = bfin_irq_on, + .sff_irq_clear = bfin_irq_clear, + .sff_irq_on = bfin_irq_on, .port_start = bfin_port_start, .port_stop = bfin_port_stop, -- cgit v1.2.2 From 45db2f6c95eee7c6622ea1b3edb9abafba58e3ab Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 8 Apr 2008 01:46:56 +0900 Subject: libata: move link onlineness check out of softreset methods Currently, SATA softresets should do link onlineness check before actually performing SRST protocol but it doesn't really belong to softreset. This patch moves onlineness check in softreset to ata_eh_reset() and ata_eh_followup_srst_needed() to clean up code and help future sata_mv changes which need clear separation between SCR and TF accesses. sata_fsl is peculiar in that its softreset really isn't softreset but combination of hardreset and softreset. This patch adds dummy private ->prereset to keep the current behavior but the driver really should implement separate hard and soft resets and return -EAGAIN from hardreset if it should be follwed by softreset. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/pata_bf54x.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'drivers/ata/pata_bf54x.c') diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c index d98bd7455e6b..0a5ad98635b1 100644 --- a/drivers/ata/pata_bf54x.c +++ b/drivers/ata/pata_bf54x.c @@ -1103,11 +1103,6 @@ static int bfin_softreset(struct ata_link *link, unsigned int *classes, unsigned int devmask = 0, err_mask; u8 err; - if (ata_link_offline(link)) { - classes[0] = ATA_DEV_NONE; - goto out; - } - /* determine if device 0/1 are present */ if (bfin_devchk(ap, 0)) devmask |= (1 << 0); @@ -1132,7 +1127,6 @@ static int bfin_softreset(struct ata_link *link, unsigned int *classes, classes[1] = ata_sff_dev_classify(&ap->link.device[1], devmask & (1 << 1), &err); - out: return 0; } -- cgit v1.2.2