From fe06e5f9b7c61dc567edace3f4909672067f7d7e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 10 May 2010 21:41:39 +0200 Subject: libata-sff: separate out BMDMA EH Some of error handling logic in ata_sff_error_handler() and all of ata_sff_post_internal_cmd() are for BMDMA. Create ata_bmdma_error_handler() and ata_bmdma_post_internal_cmd() and move BMDMA part into those. While at it, change DMA protocol check to ata_is_dma(), fix post_internal_cmd to call ap->ops->bmdma_stop instead of directly calling ata_bmdma_stop() and open code hardreset selection so that ata_std_error_handler() doesn't have to know about sff hardreset. As these two functions are BMDMA specific, there's no reason to check for bmdma_addr before calling bmdma methods if the protocol of the failed command is DMA. sata_mv and pata_mpc52xx now don't need to set .post_internal_cmd to ATA_OP_NULL and pata_icside and sata_qstor don't need to set it to their bmdma_stop routines. ata_sff_post_internal_cmd() becomes noop and is removed. This fixes p3 described in clean-up-BMDMA-initialization patch. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata.h | 11 ----------- 1 file changed, 11 deletions(-) (limited to 'drivers/ata/libata.h') diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 002390cdc041..4b84ed60324a 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -38,17 +38,6 @@ struct ata_scsi_args { void (*done)(struct scsi_cmnd *); }; -static inline int ata_is_builtin_hardreset(ata_reset_fn_t reset) -{ - if (reset == sata_std_hardreset) - return 1; -#ifdef CONFIG_ATA_SFF - if (reset == sata_sff_hardreset) - return 1; -#endif - return 0; -} - /* libata-core.c */ enum { /* flags for ata_dev_read_id() */ -- cgit v1.2.2