From a5bf5f5a370ba7c10f5362265e360952145a7da1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 25 May 2007 19:16:58 +0200 Subject: ata_piix: fix pio/mwdma programming Fix various bugs in pio/mwdma mode programming. * Control bits in the timing register wasn't cleared properly while programming PIO mode. * MWDMA mode programming cleared the wrong part of control bits. * MWDMA mode programming cleared udma_mask even when the controller doesn't support UDMA. Signed-off-by: Tejun Heo Cc: Art Haas Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-) (limited to 'drivers/ata/ata_piix.c') diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 9c07b88631be..924e4474068d 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -685,8 +685,14 @@ static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev) if (adev->class == ATA_DEV_ATA) control |= 4; /* PPE enable */ + /* PIO configuration clears DTE unconditionally. It will be + * programmed in set_dmamode which is guaranteed to be called + * after set_piomode if any DMA mode is available. + */ pci_read_config_word(dev, master_port, &master_data); if (is_slave) { + /* clear TIME1|IE1|PPE1|DTE1 */ + master_data &= 0xff0f; /* Enable SITRE (seperate slave timing register) */ master_data |= 0x4000; /* enable PPE1, IE1 and TIME1 as needed */ @@ -694,12 +700,14 @@ static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev) pci_read_config_byte(dev, slave_port, &slave_data); slave_data &= (ap->port_no ? 0x0f : 0xf0); /* Load the timing nibble for this slave */ - slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0); + slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) + << (ap->port_no ? 4 : 0); } else { - /* Master keeps the bits in a different format */ - master_data &= 0xccf8; + /* clear ISP|RCT|TIME0|IE0|PPE0|DTE0 */ + master_data &= 0xccf0; /* Enable PPE, IE and TIME as appropriate */ master_data |= control; + /* load ISP and RCT */ master_data |= (timings[pio][0] << 12) | (timings[pio][1] << 8); @@ -816,7 +824,7 @@ static void do_pata_set_dmamode (struct ata_port *ap, struct ata_device *adev, i master_data &= 0xFF4F; /* Mask out IORDY|TIME1|DMAONLY */ master_data |= control << 4; pci_read_config_byte(dev, 0x44, &slave_data); - slave_data &= (0x0F + 0xE1 * ap->port_no); + slave_data &= (ap->port_no ? 0x0f : 0xf0); /* Load the matching timing */ slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0); pci_write_config_byte(dev, 0x44, slave_data); @@ -828,8 +836,11 @@ static void do_pata_set_dmamode (struct ata_port *ap, struct ata_device *adev, i (timings[pio][0] << 12) | (timings[pio][1] << 8); } - udma_enable &= ~(1 << devid); - pci_write_config_word(dev, master_port, master_data); + + if (ap->udma_mask) { + udma_enable &= ~(1 << devid); + pci_write_config_word(dev, master_port, master_data); + } } /* Don't scribble on 0x48 if the controller does not support UDMA */ if (ap->udma_mask) -- cgit v1.2.2 From c1e6f28cc5de37dcd113b9668a185c0b9334ba8a Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Tue, 3 Jul 2007 10:19:20 -0400 Subject: Add a PCI ID for santa rosa's PATA controller. Signed-off-by: Christian Lamparter Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/ata/ata_piix.c') diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 924e4474068d..76cbdf0094f3 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -200,6 +200,8 @@ static const struct pci_device_id piix_pci_tbl[] = { /* ICH7/7-R (i945, i975) UDMA 100*/ { 0x8086, 0x27DF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_133 }, { 0x8086, 0x269E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + /* ICH8 Mobile PATA Controller */ + { 0x8086, 0x2850, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, /* NOTE: The following PCI ids must be kept in sync with the * list in drivers/pci/quirks.c. -- cgit v1.2.2 From bf6263a853c9c143bf03f0a6fdcc68ab714fb5f5 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Mon, 9 Jul 2007 12:16:50 -0400 Subject: [libata] Use ATA_UDMAx standard masks when filling driver's udma_mask info The ATA_UDMAx masks are self-documenting, and far better than manually writing in the hex mask. Note that pata_it8213 mask differed from the comment. Added a FIXME there. Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers/ata/ata_piix.c') diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 76cbdf0094f3..6a3bfef58e13 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -497,7 +497,7 @@ static struct ata_port_info piix_port_info[] = { .flags = PIIX_SATA_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x7f, /* udma0-6 */ + .udma_mask = ATA_UDMA6, .port_ops = &piix_sata_ops, }, @@ -507,7 +507,7 @@ static struct ata_port_info piix_port_info[] = { .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x7f, /* udma0-6 */ + .udma_mask = ATA_UDMA6, .port_ops = &piix_sata_ops, }, @@ -518,7 +518,7 @@ static struct ata_port_info piix_port_info[] = { PIIX_FLAG_AHCI, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x7f, /* udma0-6 */ + .udma_mask = ATA_UDMA6, .port_ops = &piix_sata_ops, }, @@ -529,7 +529,7 @@ static struct ata_port_info piix_port_info[] = { PIIX_FLAG_AHCI, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x7f, /* udma0-6 */ + .udma_mask = ATA_UDMA6, .port_ops = &piix_sata_ops, }, @@ -540,7 +540,7 @@ static struct ata_port_info piix_port_info[] = { PIIX_FLAG_AHCI, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x7f, /* udma0-6 */ + .udma_mask = ATA_UDMA6, .port_ops = &piix_sata_ops, }, -- cgit v1.2.2