From e9b3aba887f47f9cd64de20fec9c333a932b70dc Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 17 Jul 2007 22:40:06 +0200 Subject: ACPI: Implement the set_target() callback from pm_ops In the future some drivers may need to use ACPI to determine the low power states in which to place their devices, but to provide the drivers with this information the ACPI core needs to know what sleep state the system is going to enter. Namely, the device's state should not be too high power for given system sleep state and, if the device is supposed to be able to wake up the system, its state should not be too low power for the wake up to be possible). For this purpose, the ACPI core needs to implement the set_target() method in 'struct pm_ops' and store the target system sleep state passed by the PM core in a variable. Signed-off-by: Rafael J. Wysocki Acked-by: Pavel Machek Acked-by: David Brownell Signed-off-by: Len Brown --- drivers/acpi/sleep/main.c | 84 +++++++++++++++++++++++++++++------------------ 1 file changed, 52 insertions(+), 32 deletions(-) (limited to 'drivers/acpi/sleep') diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c index 42127c0d612c..19f8557c711c 100644 --- a/drivers/acpi/sleep/main.c +++ b/drivers/acpi/sleep/main.c @@ -34,34 +34,54 @@ static u32 acpi_suspend_states[] = { static int init_8259A_after_S1; +extern int acpi_sleep_prepare(u32 acpi_state); +extern void acpi_power_off(void); + +static u32 acpi_target_sleep_state = ACPI_STATE_S0; + +/** + * acpi_pm_set_target - Set the target system sleep state to the state + * associated with given @pm_state, if supported. + */ + +static int acpi_pm_set_target(suspend_state_t pm_state) +{ + u32 acpi_state = acpi_suspend_states[pm_state]; + int error = 0; + + if (sleep_states[acpi_state]) { + acpi_target_sleep_state = acpi_state; + } else { + printk(KERN_ERR "ACPI does not support this state: %d\n", + pm_state); + error = -ENOSYS; + } + return error; +} + /** * acpi_pm_prepare - Do preliminary suspend work. - * @pm_state: suspend state we're entering. + * @pm_state: ignored * - * Make sure we support the state. If we do, and we need it, set the - * firmware waking vector and do arch-specific nastiness to get the - * wakeup code to the waking vector. + * If necessary, set the firmware waking vector and do arch-specific + * nastiness to get the wakeup code to the waking vector. */ -extern int acpi_sleep_prepare(u32 acpi_state); -extern void acpi_power_off(void); - static int acpi_pm_prepare(suspend_state_t pm_state) { - u32 acpi_state = acpi_suspend_states[pm_state]; + int error = acpi_sleep_prepare(acpi_target_sleep_state); - if (!sleep_states[acpi_state]) { - printk("acpi_pm_prepare does not support %d \n", pm_state); - return -EPERM; - } - return acpi_sleep_prepare(acpi_state); + if (error) + acpi_target_sleep_state = ACPI_STATE_S0; + + return error; } /** * acpi_pm_enter - Actually enter a sleep state. - * @pm_state: State we're entering. + * @pm_state: ignored * - * Flush caches and go to sleep. For STR or STD, we have to call + * Flush caches and go to sleep. For STR or S2, we have to call * arch-specific assembly, which in turn call acpi_enter_sleep_state(). * It's unfortunate, but it works. Please fix if you're feeling frisky. */ @@ -70,31 +90,32 @@ static int acpi_pm_enter(suspend_state_t pm_state) { acpi_status status = AE_OK; unsigned long flags = 0; - u32 acpi_state = acpi_suspend_states[pm_state]; + u32 acpi_state = acpi_target_sleep_state; ACPI_FLUSH_CPU_CACHE(); /* Do arch specific saving of state. */ - if (pm_state > PM_SUSPEND_STANDBY) { + if (acpi_state == ACPI_STATE_S2 || acpi_state == ACPI_STATE_S3) { int error = acpi_save_state_mem(); - if (error) + + if (error) { + acpi_target_sleep_state = ACPI_STATE_S0; return error; + } } local_irq_save(flags); acpi_enable_wakeup_device(acpi_state); - switch (pm_state) { - case PM_SUSPEND_STANDBY: + switch (acpi_state) { + case ACPI_STATE_S1: barrier(); status = acpi_enter_sleep_state(acpi_state); break; - case PM_SUSPEND_MEM: + case ACPI_STATE_S2: + case ACPI_STATE_S3: do_suspend_lowlevel(); break; - - default: - return -EINVAL; } /* ACPI 3.0 specs (P62) says that it's the responsabilty @@ -107,12 +128,8 @@ static int acpi_pm_enter(suspend_state_t pm_state) local_irq_restore(flags); printk(KERN_DEBUG "Back to C!\n"); - /* restore processor state - * We should only be here if we're coming back from STR or STD. - * And, in the case of the latter, the memory image should have already - * been loaded from disk. - */ - if (pm_state > PM_SUSPEND_STANDBY) + /* restore processor state */ + if (acpi_state == ACPI_STATE_S2 || acpi_state == ACPI_STATE_S3) acpi_restore_state_mem(); return ACPI_SUCCESS(status) ? 0 : -EFAULT; @@ -120,7 +137,7 @@ static int acpi_pm_enter(suspend_state_t pm_state) /** * acpi_pm_finish - Finish up suspend sequence. - * @pm_state: State we're coming out of. + * @pm_state: ignored * * This is called after we wake back up (or if entering the sleep state * failed). @@ -128,7 +145,7 @@ static int acpi_pm_enter(suspend_state_t pm_state) static int acpi_pm_finish(suspend_state_t pm_state) { - u32 acpi_state = acpi_suspend_states[pm_state]; + u32 acpi_state = acpi_target_sleep_state; acpi_leave_sleep_state(acpi_state); acpi_disable_wakeup_device(acpi_state); @@ -136,6 +153,8 @@ static int acpi_pm_finish(suspend_state_t pm_state) /* reset firmware waking vector */ acpi_set_firmware_waking_vector((acpi_physical_address) 0); + acpi_target_sleep_state = ACPI_STATE_S0; + if (init_8259A_after_S1) { printk("Broken toshiba laptop -> kicking interrupts\n"); init_8259A(0); @@ -176,6 +195,7 @@ static int acpi_pm_state_valid(suspend_state_t pm_state) static struct pm_ops acpi_pm_ops = { .valid = acpi_pm_state_valid, + .set_target = acpi_pm_set_target, .prepare = acpi_pm_prepare, .enter = acpi_pm_enter, .finish = acpi_pm_finish, -- cgit v1.2.2 From fd4aff1a28eecbd729b409bf7d3eff5948f20414 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Tue, 17 Jul 2007 22:40:25 +0200 Subject: ACPI: Add acpi_pm_device_sleep_state helper routine Based on the David Brownell's patch at http://marc.info/?l=linux-acpi&m=117873972806360&w=2 updated by: Rafael J. Wysocki Add a helper routine returning the lowest power (highest number) ACPI device power state that given device can be in while the system is in the sleep state indicated by acpi_target_sleep_state . Signed-off-by: Rafael J. Wysocki Acked-by: Pavel Machek Signed-off-by: Len Brown --- drivers/acpi/sleep/main.c | 75 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 75 insertions(+) (limited to 'drivers/acpi/sleep') diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c index 19f8557c711c..55eca6eabcd8 100644 --- a/drivers/acpi/sleep/main.c +++ b/drivers/acpi/sleep/main.c @@ -260,6 +260,81 @@ static struct hibernation_ops acpi_hibernation_ops = { }; #endif /* CONFIG_SOFTWARE_SUSPEND */ +/** + * acpi_pm_device_sleep_state - return preferred power state of ACPI device + * in the system sleep state given by %acpi_target_sleep_state + * @dev: device to examine + * @wake: if set, the device should be able to wake up the system + * @d_min_p: used to store the upper limit of allowed states range + * Return value: preferred power state of the device on success, -ENODEV on + * failure (ie. if there's no 'struct acpi_device' for @dev) + * + * Find the lowest power (highest number) ACPI device power state that + * device @dev can be in while the system is in the sleep state represented + * by %acpi_target_sleep_state. If @wake is nonzero, the device should be + * able to wake up the system from this sleep state. If @d_min_p is set, + * the highest power (lowest number) device power state of @dev allowed + * in this system sleep state is stored at the location pointed to by it. + * + * The caller must ensure that @dev is valid before using this function. + * The caller is also responsible for figuring out if the device is + * supposed to be able to wake up the system and passing this information + * via @wake. + */ + +int acpi_pm_device_sleep_state(struct device *dev, int wake, int *d_min_p) +{ + acpi_handle handle = DEVICE_ACPI_HANDLE(dev); + struct acpi_device *adev; + char acpi_method[] = "_SxD"; + unsigned long d_min, d_max; + + if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) { + printk(KERN_ERR "ACPI handle has no context!\n"); + return -ENODEV; + } + + acpi_method[2] = '0' + acpi_target_sleep_state; + /* + * If the sleep state is S0, we will return D3, but if the device has + * _S0W, we will use the value from _S0W + */ + d_min = ACPI_STATE_D0; + d_max = ACPI_STATE_D3; + + /* + * If present, _SxD methods return the minimum D-state (highest power + * state) we can use for the corresponding S-states. Otherwise, the + * minimum D-state is D0 (ACPI 3.x). + * + * NOTE: We rely on acpi_evaluate_integer() not clobbering the integer + * provided -- that's our fault recovery, we ignore retval. + */ + if (acpi_target_sleep_state > ACPI_STATE_S0) + acpi_evaluate_integer(handle, acpi_method, NULL, &d_min); + + /* + * If _PRW says we can wake up the system from the target sleep state, + * the D-state returned by _SxD is sufficient for that (we assume a + * wakeup-aware driver if wake is set). Still, if _SxW exists + * (ACPI 3.x), it should return the maximum (lowest power) D-state that + * can wake the system. _S0W may be valid, too. + */ + if (acpi_target_sleep_state == ACPI_STATE_S0 || + (wake && adev->wakeup.state.enabled && + adev->wakeup.sleep_state <= acpi_target_sleep_state)) { + acpi_method[3] = 'W'; + acpi_evaluate_integer(handle, acpi_method, NULL, &d_max); + /* Sanity check */ + if (d_max < d_min) + d_min = d_max; + } + + if (d_min_p) + *d_min_p = d_min; + return d_max; +} + /* * Toshiba fails to preserve interrupts over S1, reinitialization * of 8259 is needed after S1 resume. -- cgit v1.2.2 From 50ad147aa09c829cd452fae6ca99396c0b5b0695 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 24 Jul 2007 11:58:39 +0200 Subject: ACPI: Remove references to ACPI_STATE_S2 from acpi_pm_enter Remove references to ACPI_STATE_S2, introduced by acpi-implement-the-set_target-callback-from-pm_ops.patch, from acpi_pm_enter(). Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown --- drivers/acpi/sleep/main.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'drivers/acpi/sleep') diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c index 55eca6eabcd8..29bdb013f46c 100644 --- a/drivers/acpi/sleep/main.c +++ b/drivers/acpi/sleep/main.c @@ -81,8 +81,8 @@ static int acpi_pm_prepare(suspend_state_t pm_state) * acpi_pm_enter - Actually enter a sleep state. * @pm_state: ignored * - * Flush caches and go to sleep. For STR or S2, we have to call - * arch-specific assembly, which in turn call acpi_enter_sleep_state(). + * Flush caches and go to sleep. For STR we have to call arch-specific + * assembly, which in turn call acpi_enter_sleep_state(). * It's unfortunate, but it works. Please fix if you're feeling frisky. */ @@ -95,7 +95,7 @@ static int acpi_pm_enter(suspend_state_t pm_state) ACPI_FLUSH_CPU_CACHE(); /* Do arch specific saving of state. */ - if (acpi_state == ACPI_STATE_S2 || acpi_state == ACPI_STATE_S3) { + if (acpi_state == ACPI_STATE_S3) { int error = acpi_save_state_mem(); if (error) { @@ -112,7 +112,6 @@ static int acpi_pm_enter(suspend_state_t pm_state) status = acpi_enter_sleep_state(acpi_state); break; - case ACPI_STATE_S2: case ACPI_STATE_S3: do_suspend_lowlevel(); break; @@ -129,7 +128,7 @@ static int acpi_pm_enter(suspend_state_t pm_state) printk(KERN_DEBUG "Back to C!\n"); /* restore processor state */ - if (acpi_state == ACPI_STATE_S2 || acpi_state == ACPI_STATE_S3) + if (acpi_state == ACPI_STATE_S3) acpi_restore_state_mem(); return ACPI_SUCCESS(status) ? 0 : -EFAULT; -- cgit v1.2.2