From a997ab332832519c2e292db13f509e4360495a5a Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 12 Jun 2010 00:05:19 +0200 Subject: ACPI / ACPICA: Do not attempt to disable GPE when installing handler Commit 0f849d2cc6863c7874889ea60a871fb71399dd3f (ACPICA: Minimize the differences between linux GPE code and ACPICA code base) introduced a change attempting to disable a GPE before installing a handler for it in acpi_install_gpe_handler() which was incorrect. First, the GPE disabled by it is never enabled again (except during resume) which leads to battery insert/remove events not being reported on the Maxim Levitsky's machine. Second, the disabled GPE is still reported as enabled by the sysfs interface that only checks its enable register's enable_for_run mask. Revert this change for now, because it causes more damage to happen than the bug it was supposed to fix. Signed-off-by: Rafael J. Wysocki Reported-and-tested-by: Maxim Levitsky Signed-off-by: Len Brown --- drivers/acpi/acpica/evxface.c | 7 ------- 1 file changed, 7 deletions(-) (limited to 'drivers/acpi/acpica') diff --git a/drivers/acpi/acpica/evxface.c b/drivers/acpi/acpica/evxface.c index cc825023012a..4a531cdf7942 100644 --- a/drivers/acpi/acpica/evxface.c +++ b/drivers/acpi/acpica/evxface.c @@ -719,13 +719,6 @@ acpi_install_gpe_handler(acpi_handle gpe_device, handler->context = context; handler->method_node = gpe_event_info->dispatch.method_node; - /* Disable the GPE before installing the handler */ - - status = acpi_ev_disable_gpe(gpe_event_info); - if (ACPI_FAILURE (status)) { - goto unlock_and_exit; - } - /* Install the handler */ flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); -- cgit v1.2.2 From e4e9a735991c80fb0fc1bd4a13a93681c3c17ce0 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 8 Jun 2010 10:48:26 +0200 Subject: ACPI / ACPICA: Use helper function for computing GPE masks In quite a few places ACPICA needs to compute a GPE enable mask with only one bit, corresponding to a given GPE, set. Currently, that computation is always open coded which leads to unnecessary code duplication. Fix this by introducing a helper function for computing one-bit GPE enable masks and using it where appropriate. Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown --- drivers/acpi/acpica/achware.h | 3 +++ drivers/acpi/acpica/evgpe.c | 7 +++--- drivers/acpi/acpica/hwgpe.c | 52 +++++++++++++++++++++++++++++++++---------- 3 files changed, 46 insertions(+), 16 deletions(-) (limited to 'drivers/acpi/acpica') diff --git a/drivers/acpi/acpica/achware.h b/drivers/acpi/acpica/achware.h index 5900f135dc6d..c46277d179f0 100644 --- a/drivers/acpi/acpica/achware.h +++ b/drivers/acpi/acpica/achware.h @@ -90,6 +90,9 @@ acpi_status acpi_hw_write_port(acpi_io_address address, u32 value, u32 width); /* * hwgpe - GPE support */ +u32 acpi_hw_gpe_register_bit(struct acpi_gpe_event_info *gpe_event_info, + struct acpi_gpe_register_info *gpe_register_info); + acpi_status acpi_hw_low_disable_gpe(struct acpi_gpe_event_info *gpe_event_info); acpi_status diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c index deb26f4c6623..57eeb3bde41e 100644 --- a/drivers/acpi/acpica/evgpe.c +++ b/drivers/acpi/acpica/evgpe.c @@ -69,7 +69,7 @@ acpi_status acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info) { struct acpi_gpe_register_info *gpe_register_info; - u8 register_bit; + u32 register_bit; ACPI_FUNCTION_TRACE(ev_update_gpe_enable_masks); @@ -78,9 +78,8 @@ acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info) return_ACPI_STATUS(AE_NOT_EXIST); } - register_bit = (u8) - (1 << - (gpe_event_info->gpe_number - gpe_register_info->base_gpe_number)); + register_bit = acpi_hw_gpe_register_bit(gpe_event_info, + gpe_register_info); /* Clear the wake/run bits up front */ diff --git a/drivers/acpi/acpica/hwgpe.c b/drivers/acpi/acpica/hwgpe.c index bd72319a38f0..d989b8e786cc 100644 --- a/drivers/acpi/acpica/hwgpe.c +++ b/drivers/acpi/acpica/hwgpe.c @@ -55,6 +55,27 @@ acpi_hw_enable_wakeup_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, struct acpi_gpe_block_info *gpe_block, void *context); +/****************************************************************************** + * + * FUNCTION: acpi_hw_gpe_register_bit + * + * PARAMETERS: gpe_event_info - Info block for the GPE + * gpe_register_info - Info block for the GPE register + * + * RETURN: Status + * + * DESCRIPTION: Compute GPE enable mask with one bit corresponding to the given + * GPE set. + * + ******************************************************************************/ + +u32 acpi_hw_gpe_register_bit(struct acpi_gpe_event_info *gpe_event_info, + struct acpi_gpe_register_info *gpe_register_info) +{ + return (u32)1 << (gpe_event_info->gpe_number - + gpe_register_info->base_gpe_number); +} + /****************************************************************************** * * FUNCTION: acpi_hw_low_disable_gpe @@ -72,6 +93,7 @@ acpi_status acpi_hw_low_disable_gpe(struct acpi_gpe_event_info *gpe_event_info) struct acpi_gpe_register_info *gpe_register_info; acpi_status status; u32 enable_mask; + u32 register_bit; /* Get the info block for the entire GPE register */ @@ -89,9 +111,9 @@ acpi_status acpi_hw_low_disable_gpe(struct acpi_gpe_event_info *gpe_event_info) /* Clear just the bit that corresponds to this GPE */ - ACPI_CLEAR_BIT(enable_mask, ((u32)1 << - (gpe_event_info->gpe_number - - gpe_register_info->base_gpe_number))); + register_bit = acpi_hw_gpe_register_bit(gpe_event_info, + gpe_register_info); + ACPI_CLEAR_BIT(enable_mask, register_bit); /* Write the updated enable mask */ @@ -150,21 +172,28 @@ acpi_hw_write_gpe_enable_reg(struct acpi_gpe_event_info * gpe_event_info) acpi_status acpi_hw_clear_gpe(struct acpi_gpe_event_info * gpe_event_info) { + struct acpi_gpe_register_info *gpe_register_info; acpi_status status; - u8 register_bit; + u32 register_bit; ACPI_FUNCTION_ENTRY(); - register_bit = (u8)(1 << - (gpe_event_info->gpe_number - - gpe_event_info->register_info->base_gpe_number)); + /* Get the info block for the entire GPE register */ + + gpe_register_info = gpe_event_info->register_info; + if (!gpe_register_info) { + return (AE_NOT_EXIST); + } + + register_bit = acpi_hw_gpe_register_bit(gpe_event_info, + gpe_register_info); /* * Write a one to the appropriate bit in the status register to * clear this GPE. */ status = acpi_hw_write(register_bit, - &gpe_event_info->register_info->status_address); + &gpe_register_info->status_address); return (status); } @@ -187,7 +216,7 @@ acpi_hw_get_gpe_status(struct acpi_gpe_event_info * gpe_event_info, acpi_event_status * event_status) { u32 in_byte; - u8 register_bit; + u32 register_bit; struct acpi_gpe_register_info *gpe_register_info; acpi_status status; acpi_event_status local_event_status = 0; @@ -204,9 +233,8 @@ acpi_hw_get_gpe_status(struct acpi_gpe_event_info * gpe_event_info, /* Get the register bitmask for this GPE */ - register_bit = (u8)(1 << - (gpe_event_info->gpe_number - - gpe_event_info->register_info->base_gpe_number)); + register_bit = acpi_hw_gpe_register_bit(gpe_event_info, + gpe_register_info); /* GPE currently enabled? (enabled for runtime?) */ -- cgit v1.2.2 From fd247447c1d94a79d5cfc647430784306b3a8323 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 8 Jun 2010 10:49:08 +0200 Subject: ACPI / ACPICA: Fix low-level GPE manipulation code ACPICA uses acpi_ev_enable_gpe() for enabling GPEs at the low level, which is incorrect, because this function only enables the GPE if the corresponding bit in its enable register's enable_for_run mask is set. This causes acpi_set_gpe() to work incorrectly if used for enabling GPEs that were not previously enabled with acpi_enable_gpe(). As a result, among other things, wakeup-only GPEs are never enabled by acpi_enable_wakeup_device(), so the devices that use them are unable to wake up the system. To fix this issue remove acpi_ev_enable_gpe() and its counterpart acpi_ev_disable_gpe() and replace acpi_hw_low_disable_gpe() with acpi_hw_low_set_gpe() that will be used instead to manipulate GPE enable bits at the low level. Make the users of acpi_ev_enable_gpe() and acpi_ev_disable_gpe() call acpi_hw_low_set_gpe() instead and make sure that GPE enable masks are only updated by acpi_enable_gpe() and acpi_disable_gpe() when GPE reference counters change from 0 to 1 and from 1 to 0, respectively. Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown --- drivers/acpi/acpica/acevents.h | 4 -- drivers/acpi/acpica/achware.h | 3 +- drivers/acpi/acpica/evgpe.c | 108 +---------------------------------------- drivers/acpi/acpica/evxfevnt.c | 59 +++++++++++++++++++--- drivers/acpi/acpica/hwgpe.c | 26 ++++++++-- 5 files changed, 78 insertions(+), 122 deletions(-) (limited to 'drivers/acpi/acpica') diff --git a/drivers/acpi/acpica/acevents.h b/drivers/acpi/acpica/acevents.h index 5e094a28cf54..138bbb521930 100644 --- a/drivers/acpi/acpica/acevents.h +++ b/drivers/acpi/acpica/acevents.h @@ -78,10 +78,6 @@ acpi_ev_queue_notify_request(struct acpi_namespace_node *node, acpi_status acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info); -acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info); - -acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info); - struct acpi_gpe_event_info *acpi_ev_get_gpe_event_info(acpi_handle gpe_device, u32 gpe_number); diff --git a/drivers/acpi/acpica/achware.h b/drivers/acpi/acpica/achware.h index c46277d179f0..32391588e163 100644 --- a/drivers/acpi/acpica/achware.h +++ b/drivers/acpi/acpica/achware.h @@ -93,7 +93,8 @@ acpi_status acpi_hw_write_port(acpi_io_address address, u32 value, u32 width); u32 acpi_hw_gpe_register_bit(struct acpi_gpe_event_info *gpe_event_info, struct acpi_gpe_register_info *gpe_register_info); -acpi_status acpi_hw_low_disable_gpe(struct acpi_gpe_event_info *gpe_event_info); +acpi_status +acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u8 action); acpi_status acpi_hw_write_gpe_enable_reg(struct acpi_gpe_event_info *gpe_event_info); diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c index 57eeb3bde41e..66cd03835d6e 100644 --- a/drivers/acpi/acpica/evgpe.c +++ b/drivers/acpi/acpica/evgpe.c @@ -99,106 +99,6 @@ acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info) return_ACPI_STATUS(AE_OK); } -/******************************************************************************* - * - * FUNCTION: acpi_ev_enable_gpe - * - * PARAMETERS: gpe_event_info - GPE to enable - * - * RETURN: Status - * - * DESCRIPTION: Hardware-enable a GPE. Always enables the GPE, regardless - * of type or number of references. - * - * Note: The GPE lock should be already acquired when this function is called. - * - ******************************************************************************/ - -acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info) -{ - acpi_status status; - - - ACPI_FUNCTION_TRACE(ev_enable_gpe); - - - /* - * We will only allow a GPE to be enabled if it has either an - * associated method (_Lxx/_Exx) or a handler. Otherwise, the - * GPE will be immediately disabled by acpi_ev_gpe_dispatch the - * first time it fires. - */ - if (!(gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK)) { - return_ACPI_STATUS(AE_NO_HANDLER); - } - - /* Ensure the HW enable masks are current */ - - status = acpi_ev_update_gpe_enable_masks(gpe_event_info); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Clear the GPE (of stale events) */ - - status = acpi_hw_clear_gpe(gpe_event_info); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Enable the requested GPE */ - - status = acpi_hw_write_gpe_enable_reg(gpe_event_info); - return_ACPI_STATUS(status); -} - -/******************************************************************************* - * - * FUNCTION: acpi_ev_disable_gpe - * - * PARAMETERS: gpe_event_info - GPE to disable - * - * RETURN: Status - * - * DESCRIPTION: Hardware-disable a GPE. Always disables the requested GPE, - * regardless of the type or number of references. - * - * Note: The GPE lock should be already acquired when this function is called. - * - ******************************************************************************/ - -acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info) -{ - acpi_status status; - - ACPI_FUNCTION_TRACE(ev_disable_gpe); - - - /* - * Note: Always disable the GPE, even if we think that that it is already - * disabled. It is possible that the AML or some other code has enabled - * the GPE behind our back. - */ - - /* Ensure the HW enable masks are current */ - - status = acpi_ev_update_gpe_enable_masks(gpe_event_info); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* - * Always H/W disable this GPE, even if we don't know the GPE type. - * Simply clear the enable bit for this particular GPE, but do not - * write out the current GPE enable mask since this may inadvertently - * enable GPEs too early. An example is a rogue GPE that has arrived - * during ACPICA initialization - possibly because AML or other code - * has enabled the GPE. - */ - status = acpi_hw_low_disable_gpe(gpe_event_info); - return_ACPI_STATUS(status); -} - /******************************************************************************* * @@ -450,10 +350,6 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context) return_VOID; } - /* Update the GPE register masks for return to enabled state */ - - (void)acpi_ev_update_gpe_enable_masks(gpe_event_info); - /* * Take a snapshot of the GPE info for this level - we copy the info to * prevent a race condition with remove_handler/remove_block. @@ -606,7 +502,7 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number) * Disable the GPE, so it doesn't keep firing before the method has a * chance to run (it runs asynchronously with interrupts enabled). */ - status = acpi_ev_disable_gpe(gpe_event_info); + status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE); if (ACPI_FAILURE(status)) { ACPI_EXCEPTION((AE_INFO, status, "Unable to disable GPE[0x%2X]", @@ -643,7 +539,7 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number) * Disable the GPE. The GPE will remain disabled a handler * is installed or ACPICA is restarted. */ - status = acpi_ev_disable_gpe(gpe_event_info); + status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE); if (ACPI_FAILURE(status)) { ACPI_EXCEPTION((AE_INFO, status, "Unable to disable GPE[0x%2X]", diff --git a/drivers/acpi/acpica/evxfevnt.c b/drivers/acpi/acpica/evxfevnt.c index 7c7bbb4d402c..e3d9f5c8e53d 100644 --- a/drivers/acpi/acpica/evxfevnt.c +++ b/drivers/acpi/acpica/evxfevnt.c @@ -199,6 +199,44 @@ acpi_status acpi_enable_event(u32 event, u32 flags) ACPI_EXPORT_SYMBOL(acpi_enable_event) +/******************************************************************************* + * + * FUNCTION: acpi_clear_and_enable_gpe + * + * PARAMETERS: gpe_event_info - GPE to enable + * + * RETURN: Status + * + * DESCRIPTION: Clear the given GPE from stale events and enable it. + * + ******************************************************************************/ +static acpi_status +acpi_clear_and_enable_gpe(struct acpi_gpe_event_info *gpe_event_info) +{ + acpi_status status; + + /* + * We will only allow a GPE to be enabled if it has either an + * associated method (_Lxx/_Exx) or a handler. Otherwise, the + * GPE will be immediately disabled by acpi_ev_gpe_dispatch the + * first time it fires. + */ + if (!(gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK)) { + return_ACPI_STATUS(AE_NO_HANDLER); + } + + /* Clear the GPE (of stale events) */ + status = acpi_hw_clear_gpe(gpe_event_info); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Enable the requested GPE */ + status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_ENABLE); + + return_ACPI_STATUS(status); +} + /******************************************************************************* * * FUNCTION: acpi_set_gpe @@ -240,11 +278,11 @@ acpi_status acpi_set_gpe(acpi_handle gpe_device, u32 gpe_number, u8 action) switch (action) { case ACPI_GPE_ENABLE: - status = acpi_ev_enable_gpe(gpe_event_info); + status = acpi_clear_and_enable_gpe(gpe_event_info); break; case ACPI_GPE_DISABLE: - status = acpi_ev_disable_gpe(gpe_event_info); + status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE); break; default: @@ -307,7 +345,11 @@ acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 gpe_type) gpe_event_info->runtime_count++; if (gpe_event_info->runtime_count == 1) { - status = acpi_ev_enable_gpe(gpe_event_info); + status = acpi_ev_update_gpe_enable_masks(gpe_event_info); + if (ACPI_SUCCESS(status)) { + status = acpi_clear_and_enable_gpe(gpe_event_info); + } + if (ACPI_FAILURE(status)) { gpe_event_info->runtime_count--; goto unlock_and_exit; @@ -334,7 +376,7 @@ acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 gpe_type) */ gpe_event_info->wakeup_count++; if (gpe_event_info->wakeup_count == 1) { - (void)acpi_ev_update_gpe_enable_masks(gpe_event_info); + status = acpi_ev_update_gpe_enable_masks(gpe_event_info); } } @@ -394,7 +436,12 @@ acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 gpe_type gpe_event_info->runtime_count--; if (!gpe_event_info->runtime_count) { - status = acpi_ev_disable_gpe(gpe_event_info); + status = acpi_ev_update_gpe_enable_masks(gpe_event_info); + if (ACPI_SUCCESS(status)) { + status = acpi_hw_low_set_gpe(gpe_event_info, + ACPI_GPE_DISABLE); + } + if (ACPI_FAILURE(status)) { gpe_event_info->runtime_count++; goto unlock_and_exit; @@ -415,7 +462,7 @@ acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 gpe_type gpe_event_info->wakeup_count--; if (!gpe_event_info->wakeup_count) { - (void)acpi_ev_update_gpe_enable_masks(gpe_event_info); + status = acpi_ev_update_gpe_enable_masks(gpe_event_info); } } diff --git a/drivers/acpi/acpica/hwgpe.c b/drivers/acpi/acpica/hwgpe.c index d989b8e786cc..40388e23e103 100644 --- a/drivers/acpi/acpica/hwgpe.c +++ b/drivers/acpi/acpica/hwgpe.c @@ -78,23 +78,27 @@ u32 acpi_hw_gpe_register_bit(struct acpi_gpe_event_info *gpe_event_info, /****************************************************************************** * - * FUNCTION: acpi_hw_low_disable_gpe + * FUNCTION: acpi_hw_low_set_gpe * * PARAMETERS: gpe_event_info - Info block for the GPE to be disabled + * action - Enable or disable * * RETURN: Status * - * DESCRIPTION: Disable a single GPE in the enable register. + * DESCRIPTION: Enable or disable a single GPE in its enable register. * ******************************************************************************/ -acpi_status acpi_hw_low_disable_gpe(struct acpi_gpe_event_info *gpe_event_info) +acpi_status +acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u8 action) { struct acpi_gpe_register_info *gpe_register_info; acpi_status status; u32 enable_mask; u32 register_bit; + ACPI_FUNCTION_ENTRY(); + /* Get the info block for the entire GPE register */ gpe_register_info = gpe_event_info->register_info; @@ -109,11 +113,23 @@ acpi_status acpi_hw_low_disable_gpe(struct acpi_gpe_event_info *gpe_event_info) return (status); } - /* Clear just the bit that corresponds to this GPE */ + /* Set ot clear just the bit that corresponds to this GPE */ register_bit = acpi_hw_gpe_register_bit(gpe_event_info, gpe_register_info); - ACPI_CLEAR_BIT(enable_mask, register_bit); + switch (action) { + case ACPI_GPE_ENABLE: + ACPI_SET_BIT(enable_mask, register_bit); + break; + + case ACPI_GPE_DISABLE: + ACPI_CLEAR_BIT(enable_mask, register_bit); + break; + + default: + ACPI_ERROR((AE_INFO, "Invalid action\n")); + return (AE_BAD_PARAMETER); + } /* Write the updated enable mask */ -- cgit v1.2.2 From c9a8bbb7704cbf515c0fc68970abbe4e91d68521 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 8 Jun 2010 10:49:45 +0200 Subject: ACPI / ACPICA: Avoid writing full enable masks to GPE registers ACPICA uses acpi_hw_write_gpe_enable_reg() to re-enable a GPE after an event signaled by it has been handled. However, this function writes the entire GPE enable mask to the GPE's enable register which may not be correct. Namely, if one of the other GPEs in the same register was previously enabled by acpi_enable_gpe() and subsequently disabled using acpi_set_gpe(), acpi_hw_write_gpe_enable_reg() will re-enable it along with the target GPE. To fix this issue rework acpi_hw_write_gpe_enable_reg() so that it calls acpi_hw_low_set_gpe() with a special action value, ACPI_GPE_COND_ENABLE, that will make it only enable the GPE if the corresponding bit in its register's enable_for_run mask is set. Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown --- drivers/acpi/acpica/hwgpe.c | 18 +++++------------- 1 file changed, 5 insertions(+), 13 deletions(-) (limited to 'drivers/acpi/acpica') diff --git a/drivers/acpi/acpica/hwgpe.c b/drivers/acpi/acpica/hwgpe.c index 40388e23e103..3450309c2786 100644 --- a/drivers/acpi/acpica/hwgpe.c +++ b/drivers/acpi/acpica/hwgpe.c @@ -118,6 +118,10 @@ acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u8 action) register_bit = acpi_hw_gpe_register_bit(gpe_event_info, gpe_register_info); switch (action) { + case ACPI_GPE_COND_ENABLE: + if (!(register_bit & gpe_register_info->enable_for_run)) + return (AE_BAD_PARAMETER); + case ACPI_GPE_ENABLE: ACPI_SET_BIT(enable_mask, register_bit); break; @@ -154,23 +158,11 @@ acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u8 action) acpi_status acpi_hw_write_gpe_enable_reg(struct acpi_gpe_event_info * gpe_event_info) { - struct acpi_gpe_register_info *gpe_register_info; acpi_status status; ACPI_FUNCTION_ENTRY(); - /* Get the info block for the entire GPE register */ - - gpe_register_info = gpe_event_info->register_info; - if (!gpe_register_info) { - return (AE_NOT_EXIST); - } - - /* Write the entire GPE (runtime) enable register */ - - status = acpi_hw_write(gpe_register_info->enable_for_run, - &gpe_register_info->enable_address); - + status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_COND_ENABLE); return (status); } -- cgit v1.2.2 From ce43ace02320a3fb9614ddb27edc3a8700d68b26 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 8 Jun 2010 10:50:20 +0200 Subject: ACPI / ACPICA: Fix GPE initialization While developing the GPE reference counting code we overlooked the fact that acpi_ev_update_gpes() could have enabled GPEs before acpi_ev_initialize_gpe_block() was called. As a result, some GPEs are enabled twice during the initialization. To fix this issue avoid calling acpi_enable_gpe() from acpi_ev_initialize_gpe_block() for the GPEs that have nonzero runtime reference counters. Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown --- drivers/acpi/acpica/evgpeblk.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) (limited to 'drivers/acpi/acpica') diff --git a/drivers/acpi/acpica/evgpeblk.c b/drivers/acpi/acpica/evgpeblk.c index 85ded1f2540d..79048de0aded 100644 --- a/drivers/acpi/acpica/evgpeblk.c +++ b/drivers/acpi/acpica/evgpeblk.c @@ -1024,6 +1024,19 @@ acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device, gpe_index = (i * ACPI_GPE_REGISTER_WIDTH) + j; gpe_event_info = &gpe_block->event_info[gpe_index]; + gpe_number = gpe_index + gpe_block->block_base_number; + + /* + * If the GPE has already been enabled for runtime + * signaling, make sure it remains enabled, but do not + * increment its reference counter. + */ + if (gpe_event_info->runtime_count) { + acpi_set_gpe(gpe_device, gpe_number, + ACPI_GPE_ENABLE); + gpe_enabled_count++; + continue; + } if (gpe_event_info->flags & ACPI_GPE_CAN_WAKE) { wake_gpe_count++; @@ -1040,7 +1053,6 @@ acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device, /* Enable this GPE */ - gpe_number = gpe_index + gpe_block->block_base_number; status = acpi_enable_gpe(gpe_device, gpe_number, ACPI_GPE_TYPE_RUNTIME); if (ACPI_FAILURE(status)) { -- cgit v1.2.2