From aa387cc895672b00f807ad7c734a2defaf677712 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Sun, 31 Jul 2011 22:05:09 +0200 Subject: block: add bsg helper library This moves the FC classes bsg code to the block layer and makes it a lib so that other classes like iscsi and SAS can use it. It is helpful because working with the request queue, bios, creating scatterlists, etc are a pain that the LLD does not have to worry about with normal IOs and should not have to worry about for bsg requests. Signed-off-by: Mike Christie Signed-off-by: Jens Axboe --- block/Kconfig | 10 ++ block/Makefile | 1 + block/bsg-lib.c | 297 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 308 insertions(+) create mode 100644 block/bsg-lib.c (limited to 'block') diff --git a/block/Kconfig b/block/Kconfig index 60be1e0455da..e97934eececa 100644 --- a/block/Kconfig +++ b/block/Kconfig @@ -65,6 +65,16 @@ config BLK_DEV_BSG If unsure, say Y. +config BLK_DEV_BSGLIB + bool "Block layer SG support v4 helper lib" + default n + select BLK_DEV_BSG + help + Subsystems will normally enable this if needed. Users will not + normally need to manually enable this. + + If unsure, say N. + config BLK_DEV_INTEGRITY bool "Block layer data integrity support" ---help--- diff --git a/block/Makefile b/block/Makefile index 0fec4b3fab51..514c6e4f427a 100644 --- a/block/Makefile +++ b/block/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_BLOCK) := elevator.o blk-core.o blk-tag.o blk-sysfs.o \ blk-iopoll.o blk-lib.o ioctl.o genhd.o scsi_ioctl.o obj-$(CONFIG_BLK_DEV_BSG) += bsg.o +obj-$(CONFIG_BLK_DEV_BSGLIB) += bsg-lib.o obj-$(CONFIG_BLK_CGROUP) += blk-cgroup.o obj-$(CONFIG_BLK_DEV_THROTTLING) += blk-throttle.o obj-$(CONFIG_IOSCHED_NOOP) += noop-iosched.o diff --git a/block/bsg-lib.c b/block/bsg-lib.c new file mode 100644 index 000000000000..f8c0a61a529c --- /dev/null +++ b/block/bsg-lib.c @@ -0,0 +1,297 @@ +/* + * BSG helper library + * + * Copyright (C) 2008 James Smart, Emulex Corporation + * Copyright (C) 2011 Red Hat, Inc. All rights reserved. + * Copyright (C) 2011 Mike Christie + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#include +#include +#include +#include +#include +#include + +/** + * bsg_destroy_job - routine to teardown/delete a bsg job + * @job: bsg_job that is to be torn down + */ +static void bsg_destroy_job(struct bsg_job *job) +{ + put_device(job->dev); /* release reference for the request */ + + kfree(job->request_payload.sg_list); + kfree(job->reply_payload.sg_list); + kfree(job); +} + +/** + * bsg_job_done - completion routine for bsg requests + * @job: bsg_job that is complete + * @result: job reply result + * @reply_payload_rcv_len: length of payload recvd + * + * The LLD should call this when the bsg job has completed. + */ +void bsg_job_done(struct bsg_job *job, int result, + unsigned int reply_payload_rcv_len) +{ + struct request *req = job->req; + struct request *rsp = req->next_rq; + int err; + + err = job->req->errors = result; + if (err < 0) + /* we're only returning the result field in the reply */ + job->req->sense_len = sizeof(u32); + else + job->req->sense_len = job->reply_len; + /* we assume all request payload was transferred, residual == 0 */ + req->resid_len = 0; + + if (rsp) { + WARN_ON(reply_payload_rcv_len > rsp->resid_len); + + /* set reply (bidi) residual */ + rsp->resid_len -= min(reply_payload_rcv_len, rsp->resid_len); + } + blk_complete_request(req); +} +EXPORT_SYMBOL_GPL(bsg_job_done); + +/** + * bsg_softirq_done - softirq done routine for destroying the bsg requests + * @rq: BSG request that holds the job to be destroyed + */ +static void bsg_softirq_done(struct request *rq) +{ + struct bsg_job *job = rq->special; + + blk_end_request_all(rq, rq->errors); + bsg_destroy_job(job); +} + +static int bsg_map_buffer(struct bsg_buffer *buf, struct request *req) +{ + size_t sz = (sizeof(struct scatterlist) * req->nr_phys_segments); + + BUG_ON(!req->nr_phys_segments); + + buf->sg_list = kzalloc(sz, GFP_KERNEL); + if (!buf->sg_list) + return -ENOMEM; + sg_init_table(buf->sg_list, req->nr_phys_segments); + buf->sg_cnt = blk_rq_map_sg(req->q, req, buf->sg_list); + buf->payload_len = blk_rq_bytes(req); + return 0; +} + +/** + * bsg_create_job - create the bsg_job structure for the bsg request + * @dev: device that is being sent the bsg request + * @req: BSG request that needs a job structure + */ +static int bsg_create_job(struct device *dev, struct request *req) +{ + struct request *rsp = req->next_rq; + struct request_queue *q = req->q; + struct bsg_job *job; + int ret; + + BUG_ON(req->special); + + job = kzalloc(sizeof(struct bsg_job) + q->bsg_job_size, GFP_KERNEL); + if (!job) + return -ENOMEM; + + req->special = job; + job->req = req; + if (q->bsg_job_size) + job->dd_data = (void *)&job[1]; + job->request = req->cmd; + job->request_len = req->cmd_len; + job->reply = req->sense; + job->reply_len = SCSI_SENSE_BUFFERSIZE; /* Size of sense buffer + * allocated */ + if (req->bio) { + ret = bsg_map_buffer(&job->request_payload, req); + if (ret) + goto failjob_rls_job; + } + if (rsp && rsp->bio) { + ret = bsg_map_buffer(&job->reply_payload, rsp); + if (ret) + goto failjob_rls_rqst_payload; + } + job->dev = dev; + /* take a reference for the request */ + get_device(job->dev); + return 0; + +failjob_rls_rqst_payload: + kfree(job->request_payload.sg_list); +failjob_rls_job: + kfree(job); + return -ENOMEM; +} + +/* + * bsg_goose_queue - restart queue in case it was stopped + * @q: request q to be restarted + */ +void bsg_goose_queue(struct request_queue *q) +{ + if (!q) + return; + + blk_run_queue_async(q); +} +EXPORT_SYMBOL_GPL(bsg_goose_queue); + +/** + * bsg_request_fn - generic handler for bsg requests + * @q: request queue to manage + * + * On error the create_bsg_job function should return a -Exyz error value + * that will be set to the req->errors. + * + * Drivers/subsys should pass this to the queue init function. + */ +void bsg_request_fn(struct request_queue *q) +{ + struct device *dev = q->queuedata; + struct request *req; + struct bsg_job *job; + int ret; + + if (!get_device(dev)) + return; + + while (1) { + req = blk_fetch_request(q); + if (!req) + break; + spin_unlock_irq(q->queue_lock); + + ret = bsg_create_job(dev, req); + if (ret) { + req->errors = ret; + blk_end_request_all(req, ret); + spin_lock_irq(q->queue_lock); + continue; + } + + job = req->special; + ret = q->bsg_job_fn(job); + spin_lock_irq(q->queue_lock); + if (ret) + break; + } + + spin_unlock_irq(q->queue_lock); + put_device(dev); + spin_lock_irq(q->queue_lock); +} +EXPORT_SYMBOL_GPL(bsg_request_fn); + +/** + * bsg_setup_queue - Create and add the bsg hooks so we can receive requests + * @dev: device to attach bsg device to + * @q: request queue setup by caller + * @name: device to give bsg device + * @job_fn: bsg job handler + * @dd_job_size: size of LLD data needed for each job + * + * The caller should have setup the reuqest queue with bsg_request_fn + * as the request_fn. + */ +int bsg_setup_queue(struct device *dev, struct request_queue *q, + char *name, bsg_job_fn *job_fn, int dd_job_size) +{ + int ret; + + q->queuedata = dev; + q->bsg_job_size = dd_job_size; + q->bsg_job_fn = job_fn; + queue_flag_set_unlocked(QUEUE_FLAG_BIDI, q); + blk_queue_softirq_done(q, bsg_softirq_done); + blk_queue_rq_timeout(q, BLK_DEFAULT_SG_TIMEOUT); + + ret = bsg_register_queue(q, dev, name, NULL); + if (ret) { + printk(KERN_ERR "%s: bsg interface failed to " + "initialize - register queue\n", dev->kobj.name); + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(bsg_setup_queue); + +/** + * bsg_remove_queue - Deletes the bsg dev from the q + * @q: the request_queue that is to be torn down. + * + * Notes: + * Before unregistering the queue empty any requests that are blocked + */ +void bsg_remove_queue(struct request_queue *q) +{ + struct request *req; /* block request */ + int counts; /* totals for request_list count and starved */ + + if (!q) + return; + + /* Stop taking in new requests */ + spin_lock_irq(q->queue_lock); + blk_stop_queue(q); + + /* drain all requests in the queue */ + while (1) { + /* need the lock to fetch a request + * this may fetch the same reqeust as the previous pass + */ + req = blk_fetch_request(q); + /* save requests in use and starved */ + counts = q->rq.count[0] + q->rq.count[1] + + q->rq.starved[0] + q->rq.starved[1]; + spin_unlock_irq(q->queue_lock); + /* any requests still outstanding? */ + if (counts == 0) + break; + + /* This may be the same req as the previous iteration, + * always send the blk_end_request_all after a prefetch. + * It is not okay to not end the request because the + * prefetch started the request. + */ + if (req) { + /* return -ENXIO to indicate that this queue is + * going away + */ + req->errors = -ENXIO; + blk_end_request_all(req, -ENXIO); + } + + msleep(200); /* allow bsg to possibly finish */ + spin_lock_irq(q->queue_lock); + } + bsg_unregister_queue(q); +} +EXPORT_SYMBOL_GPL(bsg_remove_queue); -- cgit v1.2.2 From e5a94f56845bb4b272d82e84b5a1e2080b07ba82 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Mon, 1 Aug 2011 10:31:06 +0200 Subject: blk-throttle: correctly determine sync bio read request is always sync. Using rw_is_sync() to determine if a bio is sync. Signed-off-by: Shaohua Li Signed-off-by: Jens Axboe --- block/blk-throttle.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'block') diff --git a/block/blk-throttle.c b/block/blk-throttle.c index f6a794120505..a19f58c6fc3a 100644 --- a/block/blk-throttle.c +++ b/block/blk-throttle.c @@ -746,7 +746,7 @@ static bool tg_may_dispatch(struct throtl_data *td, struct throtl_grp *tg, static void throtl_charge_bio(struct throtl_grp *tg, struct bio *bio) { bool rw = bio_data_dir(bio); - bool sync = bio->bi_rw & REQ_SYNC; + bool sync = rw_is_sync(bio->bi_rw); /* Charge the bio to the group */ tg->bytes_disp[rw] += bio->bi_size; @@ -1150,7 +1150,7 @@ int blk_throtl_bio(struct request_queue *q, struct bio **biop) if (tg_no_rule_group(tg, rw)) { blkiocg_update_dispatch_stats(&tg->blkg, bio->bi_size, - rw, bio->bi_rw & REQ_SYNC); + rw, rw_is_sync(bio->bi_rw)); rcu_read_unlock(); return 0; } -- cgit v1.2.2 From a5395b83b78f62ccf5e3af854aacd025c2a6e7b5 Mon Sep 17 00:00:00 2001 From: Vivek Goyal Date: Tue, 2 Aug 2011 09:24:09 +0200 Subject: cfq-iosched: Reduce linked group count upon group destruction FQ keeps track of number of groups which are linked on blkcg->blkg_list. This is useful to avoid races between queue exit and cgroup exit code paths. So if at the request queue exit time linked group count is not zero, that means there are some group out there which is yet to be deleted under rcu read period and queue exit code should wait for on rcu period. In my previous patch I forgot to decrease the number of group count. So in current form, we nr_blkcg_linked_grps is always non-zero and we will always wait one rcu period (if BLK_CGROUP=y). The side effect of this is that it can increase boot time. I am surprised, nobody complained so far. Signed-off-by: Vivek Goyal Signed-off-by: Jens Axboe --- block/cfq-iosched.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'block') diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 1f96ad6254f1..650834537606 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -1209,6 +1209,9 @@ static void cfq_destroy_cfqg(struct cfq_data *cfqd, struct cfq_group *cfqg) hlist_del_init(&cfqg->cfqd_node); + BUG_ON(cfqd->nr_blkcg_linked_grps <= 0); + cfqd->nr_blkcg_linked_grps--; + /* * Put the reference taken at the time of creation so that when all * queues are gone, group can be destroyed. -- cgit v1.2.2 From e2a5429ff7947ad251310376384f449297b7492a Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 2 Aug 2011 10:43:35 +0200 Subject: bsg-lib: add module.h include Due to conflicts with the moduleh tree in linux-next, we run into an include file mess. We really need export.h in that tree, but if we add module.h locally then the issue is easier to resolve. Reported-by: Stephen Rothwell Signed-off-by: Jens Axboe --- block/bsg-lib.c | 1 + 1 file changed, 1 insertion(+) (limited to 'block') diff --git a/block/bsg-lib.c b/block/bsg-lib.c index f8c0a61a529c..6690e6e41037 100644 --- a/block/bsg-lib.c +++ b/block/bsg-lib.c @@ -25,6 +25,7 @@ #include #include #include +#include #include /** -- cgit v1.2.2 From f95fe9cfb49f6e625fbb5888cae2ed6f3a276b89 Mon Sep 17 00:00:00 2001 From: Herbert Poetzl Date: Tue, 2 Aug 2011 12:43:50 +0200 Subject: block/genhd.c: remove useless cast in diskstats_show() Remove the (unsigned long long) cast in diskstats_show() and adjusts the seq_printf() format string to 'unsigned long' diskstats_show() uses part_stat_read() to get the stats, which either accesses the specified field in the struct disk_stats directly (non SMP) or sums up the per CPU values in a variable of the same type as the field, so in any case the result will have the same type and range as the specified field which for all disk_stats entries is unsigned long Also, for unsigned long ranges the output of %lu should be identical to the one of %llu, so no change in the actual proc entry contents. Signed-off-by: Herbert Poetzl Cc: Jens Axboe Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- block/genhd.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'block') diff --git a/block/genhd.c b/block/genhd.c index 5cb51c55f6d8..e2f67902dd02 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -1146,17 +1146,17 @@ static int diskstats_show(struct seq_file *seqf, void *v) cpu = part_stat_lock(); part_round_stats(cpu, hd); part_stat_unlock(); - seq_printf(seqf, "%4d %7d %s %lu %lu %llu " - "%u %lu %lu %llu %u %u %u %u\n", + seq_printf(seqf, "%4d %7d %s %lu %lu %lu " + "%u %lu %lu %lu %u %u %u %u\n", MAJOR(part_devt(hd)), MINOR(part_devt(hd)), disk_name(gp, hd->partno, buf), part_stat_read(hd, ios[READ]), part_stat_read(hd, merges[READ]), - (unsigned long long)part_stat_read(hd, sectors[READ]), + part_stat_read(hd, sectors[READ]), jiffies_to_msecs(part_stat_read(hd, ticks[READ])), part_stat_read(hd, ios[WRITE]), part_stat_read(hd, merges[WRITE]), - (unsigned long long)part_stat_read(hd, sectors[WRITE]), + part_stat_read(hd, sectors[WRITE]), jiffies_to_msecs(part_stat_read(hd, ticks[WRITE])), part_in_flight(hd), jiffies_to_msecs(part_stat_read(hd, io_ticks)), -- cgit v1.2.2 From 35ae66e0a09ab70ed588e65f26b4c725cd1656b6 Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Fri, 5 Aug 2011 09:37:10 +0200 Subject: block: Make rq_affinity = 1 work as expected Commit 5757a6d76c introduced a new rq_affinity = 2 so as to make the request completed in the __make_request cpu. But it makes the old rq_affinity = 1 not work any more. The root cause is that if the 'cpu' and 'req->cpu' is in the same group and cpu != req->cpu, ccpu will be the same as group_cpu, so the completion will be excuted in the 'cpu' not 'group_cpu'. This patch fix problem by simpling removing group_cpu and the codes are more explicit now. If ccpu == cpu, we complete in cpu, otherwise we raise_blk_irq to ccpu. Cc: Christoph Hellwig Cc: Roland Dreier Cc: Dan Williams Cc: Jens Axboe Signed-off-by: Tao Ma Reviewed-by: Shaohua Li Signed-off-by: Jens Axboe --- block/blk-softirq.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'block') diff --git a/block/blk-softirq.c b/block/blk-softirq.c index 475fab809a80..487addc85bb5 100644 --- a/block/blk-softirq.c +++ b/block/blk-softirq.c @@ -103,7 +103,7 @@ static struct notifier_block __cpuinitdata blk_cpu_notifier = { void __blk_complete_request(struct request *req) { - int ccpu, cpu, group_cpu = NR_CPUS; + int ccpu, cpu; struct request_queue *q = req->q; unsigned long flags; @@ -117,14 +117,12 @@ void __blk_complete_request(struct request *req) */ if (test_bit(QUEUE_FLAG_SAME_COMP, &q->queue_flags) && req->cpu != -1) { ccpu = req->cpu; - if (!test_bit(QUEUE_FLAG_SAME_FORCE, &q->queue_flags)) { + if (!test_bit(QUEUE_FLAG_SAME_FORCE, &q->queue_flags)) ccpu = blk_cpu_to_group(ccpu); - group_cpu = blk_cpu_to_group(cpu); - } } else ccpu = cpu; - if (ccpu == cpu || ccpu == group_cpu) { + if (ccpu == cpu) { struct list_head *list; do_local: list = &__get_cpu_var(blk_cpu_done); -- cgit v1.2.2 From fa1bf42ff9296ac4cf211b0a1b450a6071d26a95 Mon Sep 17 00:00:00 2001 From: Jeff Moyer Date: Tue, 9 Aug 2011 20:32:09 +0200 Subject: allow blk_flush_policy to return REQ_FSEQ_DATA independent of *FLUSH blk_insert_flush has the following check: /* * If there's data but flush is not necessary, the request can be * processed directly without going through flush machinery. Queue * for normal execution. */ if ((policy & REQ_FSEQ_DATA) && !(policy & (REQ_FSEQ_PREFLUSH | REQ_FSEQ_POSTFLUSH))) { list_add_tail(&rq->queuelist, &q->queue_head); return; } However, blk_flush_policy will not return with policy set to only REQ_FSEQ_DATA: static unsigned int blk_flush_policy(unsigned int fflags, struct request *rq) { unsigned int policy = 0; if (fflags & REQ_FLUSH) { if (rq->cmd_flags & REQ_FLUSH) policy |= REQ_FSEQ_PREFLUSH; if (blk_rq_sectors(rq)) policy |= REQ_FSEQ_DATA; if (!(fflags & REQ_FUA) && (rq->cmd_flags & REQ_FUA)) policy |= REQ_FSEQ_POSTFLUSH; } return policy; } Notice that REQ_FSEQ_DATA is only set if REQ_FLUSH is set. Fix this mismatch by moving the setting of REQ_FSEQ_DATA outside of the REQ_FLUSH check. Tejun notes: Hmmm... yes, this can become a correctness issue if (and only if) blk_queue_flush() is called to change q->flush_flags while requests are in-flight; otherwise, requests wouldn't reach the function at all. Also, I think it would be a generally good idea to always set FSEQ_DATA if the request has data. Cheers, Jeff Signed-off-by: Jeff Moyer Acked-by: Tejun Heo Signed-off-by: Jens Axboe --- block/blk-flush.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'block') diff --git a/block/blk-flush.c b/block/blk-flush.c index bb21e4c36f70..2d162bd840d3 100644 --- a/block/blk-flush.c +++ b/block/blk-flush.c @@ -95,11 +95,12 @@ static unsigned int blk_flush_policy(unsigned int fflags, struct request *rq) { unsigned int policy = 0; + if (blk_rq_sectors(rq)) + policy |= REQ_FSEQ_DATA; + if (fflags & REQ_FLUSH) { if (rq->cmd_flags & REQ_FLUSH) policy |= REQ_FSEQ_PREFLUSH; - if (blk_rq_sectors(rq)) - policy |= REQ_FSEQ_DATA; if (!(fflags & REQ_FUA) && (rq->cmd_flags & REQ_FUA)) policy |= REQ_FSEQ_POSTFLUSH; } -- cgit v1.2.2 From bcf30e75b773b60379338768677a1301ef602ff9 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Thu, 11 Aug 2011 10:39:04 +0200 Subject: block: improve rq_affinity placement This patch reverts commit 35ae66e0a09ab70ed(block: Make rq_affinity = 1 work as expected). The purpose is to avoid an unnecessary IPI. Let's take an example. My test box has cpu 0-7, one socket. Say request is added from CPU 1, blk_complete_request() occurs at CPU 7. Without the reverted patch, softirq will be done at CPU 7. With it, an IPI will be directed to CPU 0, and softirq will be done at CPU 0. In this case, doing softirq at CPU 0 and CPU 7 have no difference from cache sharing point view and we can avoid an ipi if doing it in CPU 7. An immediate concern is this is just like QUEUE_FLAG_SAME_FORCE, but actually not. blk_complete_request() is running in interrupt handler, and currently I/O controller doesn't support multiple interrupts (I checked several LSI cards and AHCI), so only one CPU can run blk_complete_request(). This is still quite different as QUEUE_FLAG_SAME_FORCE. Since only one CPU runs softirq, the only difference with below patch is softirq not always runs at the first CPU of a group. Signed-off-by: Shaohua Li Signed-off-by: Jens Axboe --- block/blk-softirq.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) (limited to 'block') diff --git a/block/blk-softirq.c b/block/blk-softirq.c index 487addc85bb5..58340d0cb23a 100644 --- a/block/blk-softirq.c +++ b/block/blk-softirq.c @@ -103,7 +103,7 @@ static struct notifier_block __cpuinitdata blk_cpu_notifier = { void __blk_complete_request(struct request *req) { - int ccpu, cpu; + int ccpu, cpu, group_cpu = NR_CPUS; struct request_queue *q = req->q; unsigned long flags; @@ -117,12 +117,22 @@ void __blk_complete_request(struct request *req) */ if (test_bit(QUEUE_FLAG_SAME_COMP, &q->queue_flags) && req->cpu != -1) { ccpu = req->cpu; - if (!test_bit(QUEUE_FLAG_SAME_FORCE, &q->queue_flags)) + if (!test_bit(QUEUE_FLAG_SAME_FORCE, &q->queue_flags)) { ccpu = blk_cpu_to_group(ccpu); + group_cpu = blk_cpu_to_group(cpu); + } } else ccpu = cpu; - if (ccpu == cpu) { + /* + * If current CPU and requested CPU are in the same group, running + * softirq in current CPU. One might concern this is just like + * QUEUE_FLAG_SAME_FORCE, but actually not. blk_complete_request() is + * running in interrupt handler, and currently I/O controller doesn't + * support multiple interrupts, so current CPU is unique actually. This + * avoids IPI sending from current CPU to the first CPU of a group. + */ + if (ccpu == cpu || ccpu == group_cpu) { struct list_head *list; do_local: list = &__get_cpu_var(blk_cpu_done); -- cgit v1.2.2 From 4853abaae7e4a2af938115ce9071ef8684fb7af4 Mon Sep 17 00:00:00 2001 From: Jeff Moyer Date: Mon, 15 Aug 2011 21:37:25 +0200 Subject: block: fix flush machinery for stacking drivers with differring flush flags Commit ae1b1539622fb46e51b4d13b3f9e5f4c713f86ae, block: reimplement FLUSH/FUA to support merge, introduced a performance regression when running any sort of fsyncing workload using dm-multipath and certain storage (in our case, an HP EVA). The test I ran was fs_mark, and it dropped from ~800 files/sec on ext4 to ~100 files/sec. It turns out that dm-multipath always advertised flush+fua support, and passed commands on down the stack, where those flags used to get stripped off. The above commit changed that behavior: static inline struct request *__elv_next_request(struct request_queue *q) { struct request *rq; while (1) { - while (!list_empty(&q->queue_head)) { + if (!list_empty(&q->queue_head)) { rq = list_entry_rq(q->queue_head.next); - if (!(rq->cmd_flags & (REQ_FLUSH | REQ_FUA)) || - (rq->cmd_flags & REQ_FLUSH_SEQ)) - return rq; - rq = blk_do_flush(q, rq); - if (rq) - return rq; + return rq; } Note that previously, a command would come in here, have REQ_FLUSH|REQ_FUA set, and then get handed off to blk_do_flush: struct request *blk_do_flush(struct request_queue *q, struct request *rq) { unsigned int fflags = q->flush_flags; /* may change, cache it */ bool has_flush = fflags & REQ_FLUSH, has_fua = fflags & REQ_FUA; bool do_preflush = has_flush && (rq->cmd_flags & REQ_FLUSH); bool do_postflush = has_flush && !has_fua && (rq->cmd_flags & REQ_FUA); unsigned skip = 0; ... if (blk_rq_sectors(rq) && !do_preflush && !do_postflush) { rq->cmd_flags &= ~REQ_FLUSH; if (!has_fua) rq->cmd_flags &= ~REQ_FUA; return rq; } So, the flush machinery was bypassed in such cases (q->flush_flags == 0 && rq->cmd_flags & (REQ_FLUSH|REQ_FUA)). Now, however, we don't get into the flush machinery at all. Instead, __elv_next_request just hands a request with flush and fua bits set to the scsi_request_fn, even if the underlying request_queue does not support flush or fua. The agreed upon approach is to fix the flush machinery to allow stacking. While this isn't used in practice (since there is only one request-based dm target, and that target will now reflect the flush flags of the underlying device), it does future-proof the solution, and make it function as designed. In order to make this work, I had to add a field to the struct request, inside the flush structure (to store the original req->end_io). Shaohua had suggested overloading the union with rb_node and completion_data, but the completion data is used by device mapper and can also be used by other drivers. So, I didn't see a way around the additional field. I tested this patch on an HP EVA with both ext4 and xfs, and it recovers the lost performance. Comments and other testers, as always, are appreciated. Cheers, Jeff Signed-off-by: Jeff Moyer Acked-by: Tejun Heo Signed-off-by: Jens Axboe --- block/blk-core.c | 8 ++++++-- block/blk-flush.c | 20 ++++++++++++++++---- block/blk.h | 2 ++ 3 files changed, 24 insertions(+), 6 deletions(-) (limited to 'block') diff --git a/block/blk-core.c b/block/blk-core.c index b850bedad229..7c59b0f5eae8 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -1700,6 +1700,7 @@ EXPORT_SYMBOL_GPL(blk_rq_check_limits); int blk_insert_cloned_request(struct request_queue *q, struct request *rq) { unsigned long flags; + int where = ELEVATOR_INSERT_BACK; if (blk_rq_check_limits(q, rq)) return -EIO; @@ -1716,7 +1717,10 @@ int blk_insert_cloned_request(struct request_queue *q, struct request *rq) */ BUG_ON(blk_queued_rq(rq)); - add_acct_request(q, rq, ELEVATOR_INSERT_BACK); + if (rq->cmd_flags & (REQ_FLUSH|REQ_FUA)) + where = ELEVATOR_INSERT_FLUSH; + + add_acct_request(q, rq, where); spin_unlock_irqrestore(q->queue_lock, flags); return 0; @@ -2273,7 +2277,7 @@ static bool blk_end_bidi_request(struct request *rq, int error, * %false - we are done with this request * %true - still buffers pending for this request **/ -static bool __blk_end_bidi_request(struct request *rq, int error, +bool __blk_end_bidi_request(struct request *rq, int error, unsigned int nr_bytes, unsigned int bidi_bytes) { if (blk_update_bidi_request(rq, error, nr_bytes, bidi_bytes)) diff --git a/block/blk-flush.c b/block/blk-flush.c index 2d162bd840d3..491eb30a242d 100644 --- a/block/blk-flush.c +++ b/block/blk-flush.c @@ -123,7 +123,7 @@ static void blk_flush_restore_request(struct request *rq) /* make @rq a normal request */ rq->cmd_flags &= ~REQ_FLUSH_SEQ; - rq->end_io = NULL; + rq->end_io = rq->flush.saved_end_io; } /** @@ -301,9 +301,6 @@ void blk_insert_flush(struct request *rq) unsigned int fflags = q->flush_flags; /* may change, cache */ unsigned int policy = blk_flush_policy(fflags, rq); - BUG_ON(rq->end_io); - BUG_ON(!rq->bio || rq->bio != rq->biotail); - /* * @policy now records what operations need to be done. Adjust * REQ_FLUSH and FUA for the driver. @@ -312,6 +309,19 @@ void blk_insert_flush(struct request *rq) if (!(fflags & REQ_FUA)) rq->cmd_flags &= ~REQ_FUA; + /* + * An empty flush handed down from a stacking driver may + * translate into nothing if the underlying device does not + * advertise a write-back cache. In this case, simply + * complete the request. + */ + if (!policy) { + __blk_end_bidi_request(rq, 0, 0, 0); + return; + } + + BUG_ON(!rq->bio || rq->bio != rq->biotail); + /* * If there's data but flush is not necessary, the request can be * processed directly without going through flush machinery. Queue @@ -320,6 +330,7 @@ void blk_insert_flush(struct request *rq) if ((policy & REQ_FSEQ_DATA) && !(policy & (REQ_FSEQ_PREFLUSH | REQ_FSEQ_POSTFLUSH))) { list_add_tail(&rq->queuelist, &q->queue_head); + blk_run_queue_async(q); return; } @@ -330,6 +341,7 @@ void blk_insert_flush(struct request *rq) memset(&rq->flush, 0, sizeof(rq->flush)); INIT_LIST_HEAD(&rq->flush.list); rq->cmd_flags |= REQ_FLUSH_SEQ; + rq->flush.saved_end_io = rq->end_io; /* Usually NULL */ rq->end_io = flush_data_end_io; blk_flush_complete_seq(rq, REQ_FSEQ_ACTIONS & ~policy, 0); diff --git a/block/blk.h b/block/blk.h index d6586287adc9..20b900a377c9 100644 --- a/block/blk.h +++ b/block/blk.h @@ -17,6 +17,8 @@ int blk_rq_append_bio(struct request_queue *q, struct request *rq, struct bio *bio); void blk_dequeue_request(struct request *rq); void __blk_queue_free_tags(struct request_queue *q); +bool __blk_end_bidi_request(struct request *rq, int error, + unsigned int nr_bytes, unsigned int bidi_bytes); void blk_rq_timed_out_timer(unsigned long data); void blk_delete_timer(struct request *); -- cgit v1.2.2 From b53d1ed734a2b9af8da115b836b658daa7d47a48 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 19 Aug 2011 08:34:48 +0200 Subject: Revert "cfq: Remove special treatment for metadata rqs." We have a kernel build regression since 3.1-rc1, which is about 10% regression. The kernel source is in an ext3 filesystem. Alex Shi bisect it to commit: commit a07405b7802691d29ab3b23bdc76ee6d006aad0b Author: Justin TerAvest Date: Sun Jul 10 22:09:19 2011 +0200 cfq: Remove special treatment for metadata rqs. Apparently this is caused by lack metadata preemption, where ext3/ext4 do use READ_META. I didn't see a way to fix the issue, so suggest reverting the patch. This reverts commit a07405b7802691d29ab3b23bdc76ee6d006aad0b. Reported-by: Alex Shi Reported-by: Shaohua Li Signed-off-by: Jens Axboe --- block/cfq-iosched.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'block') diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 650834537606..a33bd4377c61 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -130,6 +130,8 @@ struct cfq_queue { unsigned long slice_end; long slice_resid; + /* pending metadata requests */ + int meta_pending; /* number of requests that are on the dispatch list or inside driver */ int dispatched; @@ -682,6 +684,9 @@ cfq_choose_req(struct cfq_data *cfqd, struct request *rq1, struct request *rq2, if (rq_is_sync(rq1) != rq_is_sync(rq2)) return rq_is_sync(rq1) ? rq1 : rq2; + if ((rq1->cmd_flags ^ rq2->cmd_flags) & REQ_META) + return rq1->cmd_flags & REQ_META ? rq1 : rq2; + s1 = blk_rq_pos(rq1); s2 = blk_rq_pos(rq2); @@ -1607,6 +1612,10 @@ static void cfq_remove_request(struct request *rq) cfqq->cfqd->rq_queued--; cfq_blkiocg_update_io_remove_stats(&(RQ_CFQG(rq))->blkg, rq_data_dir(rq), rq_is_sync(rq)); + if (rq->cmd_flags & REQ_META) { + WARN_ON(!cfqq->meta_pending); + cfqq->meta_pending--; + } } static int cfq_merge(struct request_queue *q, struct request **req, @@ -3359,6 +3368,13 @@ cfq_should_preempt(struct cfq_data *cfqd, struct cfq_queue *new_cfqq, RB_EMPTY_ROOT(&cfqq->sort_list)) return true; + /* + * So both queues are sync. Let the new request get disk time if + * it's a metadata request and the current queue is doing regular IO. + */ + if ((rq->cmd_flags & REQ_META) && !cfqq->meta_pending) + return true; + /* * Allow an RT request to pre-empt an ongoing non-RT cfqq timeslice. */ @@ -3423,6 +3439,8 @@ cfq_rq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq, struct cfq_io_context *cic = RQ_CIC(rq); cfqd->rq_queued++; + if (rq->cmd_flags & REQ_META) + cfqq->meta_pending++; cfq_update_io_thinktime(cfqd, cfqq, cic); cfq_update_io_seektime(cfqd, cfqq, rq); -- cgit v1.2.2 From 65299a3b788bd274bed92f9fa3232082c9f3ea70 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 23 Aug 2011 14:50:29 +0200 Subject: block: separate priority boosting from REQ_META Add a new REQ_PRIO to let requests preempt others in the cfq I/O schedule, and lave REQ_META purely for marking requests as metadata in blktrace. All existing callers of REQ_META except for XFS are updated to also set REQ_PRIO for now. Signed-off-by: Christoph Hellwig Reviewed-by: Namhyung Kim Signed-off-by: Jens Axboe --- block/cfq-iosched.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'block') diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index a33bd4377c61..16ace89613bc 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -130,8 +130,8 @@ struct cfq_queue { unsigned long slice_end; long slice_resid; - /* pending metadata requests */ - int meta_pending; + /* pending priority requests */ + int prio_pending; /* number of requests that are on the dispatch list or inside driver */ int dispatched; @@ -684,8 +684,8 @@ cfq_choose_req(struct cfq_data *cfqd, struct request *rq1, struct request *rq2, if (rq_is_sync(rq1) != rq_is_sync(rq2)) return rq_is_sync(rq1) ? rq1 : rq2; - if ((rq1->cmd_flags ^ rq2->cmd_flags) & REQ_META) - return rq1->cmd_flags & REQ_META ? rq1 : rq2; + if ((rq1->cmd_flags ^ rq2->cmd_flags) & REQ_PRIO) + return rq1->cmd_flags & REQ_PRIO ? rq1 : rq2; s1 = blk_rq_pos(rq1); s2 = blk_rq_pos(rq2); @@ -1612,9 +1612,9 @@ static void cfq_remove_request(struct request *rq) cfqq->cfqd->rq_queued--; cfq_blkiocg_update_io_remove_stats(&(RQ_CFQG(rq))->blkg, rq_data_dir(rq), rq_is_sync(rq)); - if (rq->cmd_flags & REQ_META) { - WARN_ON(!cfqq->meta_pending); - cfqq->meta_pending--; + if (rq->cmd_flags & REQ_PRIO) { + WARN_ON(!cfqq->prio_pending); + cfqq->prio_pending--; } } @@ -3372,7 +3372,7 @@ cfq_should_preempt(struct cfq_data *cfqd, struct cfq_queue *new_cfqq, * So both queues are sync. Let the new request get disk time if * it's a metadata request and the current queue is doing regular IO. */ - if ((rq->cmd_flags & REQ_META) && !cfqq->meta_pending) + if ((rq->cmd_flags & REQ_PRIO) && !cfqq->prio_pending) return true; /* @@ -3439,8 +3439,8 @@ cfq_rq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq, struct cfq_io_context *cic = RQ_CIC(rq); cfqd->rq_queued++; - if (rq->cmd_flags & REQ_META) - cfqq->meta_pending++; + if (rq->cmd_flags & REQ_PRIO) + cfqq->prio_pending++; cfq_update_io_thinktime(cfqd, cfqq, cic); cfq_update_io_seektime(cfqd, cfqq, rq); -- cgit v1.2.2 From e8037d49835482c9534a9a07bed0d0ea831135ae Mon Sep 17 00:00:00 2001 From: Eric Seppanen Date: Tue, 23 Aug 2011 21:25:12 +0200 Subject: block: Fix queue_flag update when rq_affinity goes from 2 to 1 Commit 5757a6d76cdf added the QUEUE_FLAG_SAME_FORCE flag, but fails to clear that flag when the current state is '2' (SAME_COMP + SAME_FORCE) and the new state is '1' (SAME_COMP). Acked-by: Dan Williams Reviewed-by: Roland Dreier Signed-off-by: Eric Seppanen Signed-off-by: Jens Axboe --- block/blk-sysfs.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'block') diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c index 0ee17b5e7fb6..e681805cdb47 100644 --- a/block/blk-sysfs.c +++ b/block/blk-sysfs.c @@ -258,11 +258,13 @@ queue_rq_affinity_store(struct request_queue *q, const char *page, size_t count) ret = queue_var_store(&val, page, count); spin_lock_irq(q->queue_lock); - if (val) { + if (val == 2) { queue_flag_set(QUEUE_FLAG_SAME_COMP, q); - if (val == 2) - queue_flag_set(QUEUE_FLAG_SAME_FORCE, q); - } else { + queue_flag_set(QUEUE_FLAG_SAME_FORCE, q); + } else if (val == 1) { + queue_flag_set(QUEUE_FLAG_SAME_COMP, q); + queue_flag_clear(QUEUE_FLAG_SAME_FORCE, q); + } else if (val == 0) { queue_flag_clear(QUEUE_FLAG_SAME_COMP, q); queue_flag_clear(QUEUE_FLAG_SAME_FORCE, q); } -- cgit v1.2.2 From a63271627521b825b0dd0a564e9a9c62b4c1ca89 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Wed, 24 Aug 2011 16:04:32 +0200 Subject: block: change force plug flush call order Do blk_flush_plug_list() first and then add new request aDo blk_flush_plug_list() first and then add new request aDo blk_flush_plug_list() first and then add new request at the tail. New request can't be merged to existing requests, but later new requests might be merged with this new one. If blk_flush_plug_list() is done later, the merge doesn't happen. Believe it or not, this fixes a 10% regression running sysbench workload. Signed-off-by: Shaohua Li Signed-off-by: Shaohua Li Signed-off-by: Jens Axboe --- block/blk-core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'block') diff --git a/block/blk-core.c b/block/blk-core.c index 90e1ffdeb415..67dba6941194 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -1302,11 +1302,11 @@ get_rq: if (__rq->q != q) plug->should_sort = 1; } - list_add_tail(&req->queuelist, &plug->list); - plug->count++; - drive_stat_acct(req, 1); if (plug->count >= BLK_MAX_REQUEST_COUNT) blk_flush_plug_list(plug, false); + plug->count++; + list_add_tail(&req->queuelist, &plug->list); + drive_stat_acct(req, 1); } else { spin_lock_irq(q->queue_lock); add_acct_request(q, req, where); -- cgit v1.2.2 From 56ebdaf2fa3c5276be201c5d1aff1490b682ecf2 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Wed, 24 Aug 2011 16:04:34 +0200 Subject: block: simplify force plug flush code a little bit Cleaning up the code a little bit. attempt_plug_merge() traverses the plug list anyway, we can do the request counting there, so stack size is reduced a little bit. The motivation here is I suspect if we should count the requests for each queue (task could handle multiple disks in the meantime), but my test doesn't show it's worthy doing. If somebody proves we should do it, below change will make that more easier. Signed-off-by: Shaohua Li Signed-off-by: Shaohua Li Signed-off-by: Jens Axboe --- block/blk-core.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'block') diff --git a/block/blk-core.c b/block/blk-core.c index 67dba6941194..b2ed78afd9f0 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -1167,7 +1167,7 @@ static bool bio_attempt_front_merge(struct request_queue *q, * true if merge was successful, otherwise false. */ static bool attempt_plug_merge(struct task_struct *tsk, struct request_queue *q, - struct bio *bio) + struct bio *bio, unsigned int *request_count) { struct blk_plug *plug; struct request *rq; @@ -1176,10 +1176,13 @@ static bool attempt_plug_merge(struct task_struct *tsk, struct request_queue *q, plug = tsk->plug; if (!plug) goto out; + *request_count = 0; list_for_each_entry_reverse(rq, &plug->list, queuelist) { int el_ret; + (*request_count)++; + if (rq->q != q) continue; @@ -1219,6 +1222,7 @@ static int __make_request(struct request_queue *q, struct bio *bio) struct blk_plug *plug; int el_ret, rw_flags, where = ELEVATOR_INSERT_SORT; struct request *req; + unsigned int request_count = 0; /* * low level driver can indicate that it wants pages above a @@ -1237,7 +1241,7 @@ static int __make_request(struct request_queue *q, struct bio *bio) * Check if we can merge with the plugged list before grabbing * any locks. */ - if (attempt_plug_merge(current, q, bio)) + if (attempt_plug_merge(current, q, bio, &request_count)) goto out; spin_lock_irq(q->queue_lock); @@ -1302,9 +1306,8 @@ get_rq: if (__rq->q != q) plug->should_sort = 1; } - if (plug->count >= BLK_MAX_REQUEST_COUNT) + if (request_count >= BLK_MAX_REQUEST_COUNT) blk_flush_plug_list(plug, false); - plug->count++; list_add_tail(&req->queuelist, &plug->list); drive_stat_acct(req, 1); } else { @@ -2634,7 +2637,6 @@ void blk_start_plug(struct blk_plug *plug) INIT_LIST_HEAD(&plug->list); INIT_LIST_HEAD(&plug->cb_list); plug->should_sort = 0; - plug->count = 0; /* * If this is a nested plug, don't actually assign it. It will be @@ -2718,7 +2720,6 @@ void blk_flush_plug_list(struct blk_plug *plug, bool from_schedule) return; list_splice_init(&plug->list, &list); - plug->count = 0; if (plug->should_sort) { list_sort(NULL, &list, plug_rq_cmp); -- cgit v1.2.2 From 8ad6a56f5679a987bfeacad1bd818a2a381aa98e Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Wed, 14 Sep 2011 09:31:01 +0200 Subject: block: Don't check QUEUE_FLAG_SAME_COMP in __blk_complete_request In __blk_complete_request, we check both QUEUE_FLAG_SAME_COMP and req->cpu to decide whether we should use req->cpu. Actually the user can also select the complete cpu by either setting BIO_CPU_AFFINE or by calling bio_set_completion_cpu. Current solution makes these 2 ways don't work any more. So we'd better just check req->cpu. Signed-off-by: Tao Ma Signed-off-by: Jens Axboe --- block/blk-softirq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'block') diff --git a/block/blk-softirq.c b/block/blk-softirq.c index 58340d0cb23a..1366a89d8e66 100644 --- a/block/blk-softirq.c +++ b/block/blk-softirq.c @@ -115,7 +115,7 @@ void __blk_complete_request(struct request *req) /* * Select completion CPU */ - if (test_bit(QUEUE_FLAG_SAME_COMP, &q->queue_flags) && req->cpu != -1) { + if (req->cpu != -1) { ccpu = req->cpu; if (!test_bit(QUEUE_FLAG_SAME_FORCE, &q->queue_flags)) { ccpu = blk_cpu_to_group(ccpu); -- cgit v1.2.2 From d11bb4462c4cc6ddd45c6927c617ad79fa6fb8fc Mon Sep 17 00:00:00 2001 From: Wanlong Gao Date: Wed, 21 Sep 2011 10:22:10 +0200 Subject: blk-cgroup: be able to remove the record of unplugged device The bug is we're not able to remove the device from blkio cgroup's per-device control files if it gets unplugged. To reproduce the bug: # mount -t cgroup -o blkio xxx /cgroup # cd /cgroup # echo "8:0 1000" > blkio.throttle.read_bps_device # unplug the device # cat blkio.throttle.read_bps_device 8:0 1000 # echo "8:0 0" > blkio.throttle.read_bps_device -bash: echo: write error: No such device After patching, the device removal will succeed. Thanks for the comments of Paul, Zefan, and Vivek. Signed-off-by: Wanlong Gao Cc: Li Zefan Cc: Paul Menage Acked-by: Vivek Goyal Cc: Jens Axboe Cc: Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- block/blk-cgroup.c | 37 ++++++++++++++++--------------------- 1 file changed, 16 insertions(+), 21 deletions(-) (limited to 'block') diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c index bcaf16ee6ad1..b596e54ddd71 100644 --- a/block/blk-cgroup.c +++ b/block/blk-cgroup.c @@ -785,10 +785,10 @@ static int blkio_policy_parse_and_set(char *buf, { char *s[4], *p, *major_s = NULL, *minor_s = NULL; int ret; - unsigned long major, minor, temp; + unsigned long major, minor; int i = 0; dev_t dev; - u64 bps, iops; + u64 temp; memset(s, 0, sizeof(s)); @@ -826,20 +826,23 @@ static int blkio_policy_parse_and_set(char *buf, dev = MKDEV(major, minor); - ret = blkio_check_dev_num(dev); + ret = strict_strtoull(s[1], 10, &temp); if (ret) - return ret; + return -EINVAL; - newpn->dev = dev; + /* For rule removal, do not check for device presence. */ + if (temp) { + ret = blkio_check_dev_num(dev); + if (ret) + return ret; + } - if (s[1] == NULL) - return -EINVAL; + newpn->dev = dev; switch (plid) { case BLKIO_POLICY_PROP: - ret = strict_strtoul(s[1], 10, &temp); - if (ret || (temp < BLKIO_WEIGHT_MIN && temp > 0) || - temp > BLKIO_WEIGHT_MAX) + if ((temp < BLKIO_WEIGHT_MIN && temp > 0) || + temp > BLKIO_WEIGHT_MAX) return -EINVAL; newpn->plid = plid; @@ -850,26 +853,18 @@ static int blkio_policy_parse_and_set(char *buf, switch(fileid) { case BLKIO_THROTL_read_bps_device: case BLKIO_THROTL_write_bps_device: - ret = strict_strtoull(s[1], 10, &bps); - if (ret) - return -EINVAL; - newpn->plid = plid; newpn->fileid = fileid; - newpn->val.bps = bps; + newpn->val.bps = temp; break; case BLKIO_THROTL_read_iops_device: case BLKIO_THROTL_write_iops_device: - ret = strict_strtoull(s[1], 10, &iops); - if (ret) - return -EINVAL; - - if (iops > THROTL_IOPS_MAX) + if (temp > THROTL_IOPS_MAX) return -EINVAL; newpn->plid = plid; newpn->fileid = fileid; - newpn->val.iops = (unsigned int)iops; + newpn->val.iops = (unsigned int)temp; break; } break; -- cgit v1.2.2 From 777eb1bf15b8532c396821774bf6451e563438f5 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Wed, 28 Sep 2011 08:07:01 -0600 Subject: block: Free queue resources at blk_release_queue() A kernel crash is observed when a mounted ext3/ext4 filesystem is physically removed. The problem is that blk_cleanup_queue() frees up some resources eg by calling elevator_exit(), which are not checked for in normal operation. So we should rather move these calls to the destructor function blk_release_queue() as at that point all remaining references are gone. However, in doing so we have to ensure that any externally supplied queue_lock is disconnected as the driver might free up the lock after the call of blk_cleanup_queue(), Signed-off-by: Hannes Reinecke Signed-off-by: Jens Axboe --- block/blk-core.c | 13 ++++++------- block/blk-sysfs.c | 5 +++++ 2 files changed, 11 insertions(+), 7 deletions(-) (limited to 'block') diff --git a/block/blk-core.c b/block/blk-core.c index b2ed78afd9f0..d34433ae7917 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -348,9 +348,10 @@ void blk_put_queue(struct request_queue *q) EXPORT_SYMBOL(blk_put_queue); /* - * Note: If a driver supplied the queue lock, it should not zap that lock - * unexpectedly as some queue cleanup components like elevator_exit() and - * blk_throtl_exit() need queue lock. + * Note: If a driver supplied the queue lock, it is disconnected + * by this function. The actual state of the lock doesn't matter + * here as the request_queue isn't accessible after this point + * (QUEUE_FLAG_DEAD is set) and no other requests will be queued. */ void blk_cleanup_queue(struct request_queue *q) { @@ -367,10 +368,8 @@ void blk_cleanup_queue(struct request_queue *q) queue_flag_set_unlocked(QUEUE_FLAG_DEAD, q); mutex_unlock(&q->sysfs_lock); - if (q->elevator) - elevator_exit(q->elevator); - - blk_throtl_exit(q); + if (q->queue_lock != &q->__queue_lock) + q->queue_lock = &q->__queue_lock; blk_put_queue(q); } diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c index e681805cdb47..60fda88c57f0 100644 --- a/block/blk-sysfs.c +++ b/block/blk-sysfs.c @@ -479,6 +479,11 @@ static void blk_release_queue(struct kobject *kobj) blk_sync_queue(q); + if (q->elevator) + elevator_exit(q->elevator); + + blk_throtl_exit(q); + if (rl->rq_pool) mempool_destroy(rl->rq_pool); -- cgit v1.2.2