From d7ce78fd9a51ca0d6b9a8cf35baef884ddb9a95c Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 29 Aug 2005 22:46:43 -0700 Subject: [SPARC64]: Eliminate irq_cpustat_t. We can put the __softirq_pending mask in the cpudata, no need for the silly NR_CPUS array in kernel/softirq.c Signed-off-by: David S. Miller --- arch/sparc64/kernel/rtrap.S | 13 ++++++++----- arch/sparc64/kernel/setup.c | 12 ------------ 2 files changed, 8 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/rtrap.S b/arch/sparc64/kernel/rtrap.S index 0696ed4b9d64..fafd227735fa 100644 --- a/arch/sparc64/kernel/rtrap.S +++ b/arch/sparc64/kernel/rtrap.S @@ -153,11 +153,14 @@ __handle_signal: rtrap_irq: rtrap_clr_l6: clr %l6 rtrap: - ldub [%g6 + TI_CPU], %l0 - sethi %hi(irq_stat), %l2 ! &softirq_active - or %l2, %lo(irq_stat), %l2 ! &softirq_active -irqsz_patchme: sllx %l0, 0, %l0 - lduw [%l2 + %l0], %l1 ! softirq_pending +#ifndef CONFIG_SMP + sethi %hi(per_cpu____cpu_data), %l0 + lduw [%l0 + %lo(per_cpu____cpu_data)], %l1 +#else + sethi %hi(per_cpu____cpu_data), %l0 + or %l0, %lo(per_cpu____cpu_data), %l0 + lduw [%l0 + %g5], %l1 +#endif cmp %l1, 0 /* mm/ultra.S:xcall_report_regs KNOWS about this load. */ diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index fbdfed3798d8..ddbed3341a23 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -511,18 +511,6 @@ void __init setup_arch(char **cmdline_p) conswitchp = &prom_con; #endif -#ifdef CONFIG_SMP - i = (unsigned long)&irq_stat[1] - (unsigned long)&irq_stat[0]; - if ((i == SMP_CACHE_BYTES) || (i == (2 * SMP_CACHE_BYTES))) { - extern unsigned int irqsz_patchme[1]; - irqsz_patchme[0] |= ((i == SMP_CACHE_BYTES) ? SMP_CACHE_BYTES_SHIFT : \ - SMP_CACHE_BYTES_SHIFT + 1); - flushi((long)&irqsz_patchme[0]); - } else { - prom_printf("Unexpected size of irq_stat[] elements\n"); - prom_halt(); - } -#endif /* Work out if we are starfire early on */ check_if_starfire(); -- cgit v1.2.2 From dbd2fdf549317de00e0b5ea465de5372039b7ee8 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 30 Aug 2005 11:26:15 -0700 Subject: [SPARC64]: Kill BRANCH_IF_ANY_CHEETAH() from copy page. Just patch the branch at boot time instead. Signed-off-by: David S. Miller --- arch/sparc64/kernel/head.S | 3 ++- arch/sparc64/lib/copy_page.S | 13 ++++++++++++- 2 files changed, 14 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/head.S b/arch/sparc64/kernel/head.S index 8104a56ca2d8..1fa06c4e3bdb 100644 --- a/arch/sparc64/kernel/head.S +++ b/arch/sparc64/kernel/head.S @@ -538,11 +538,12 @@ cheetah_tlb_fixup: nop call cheetah_plus_patch_winfixup nop - 2: /* Patch copy/page operations to cheetah optimized versions. */ call cheetah_patch_copyops nop + call cheetah_patch_copy_page + nop call cheetah_patch_cachetlbops nop diff --git a/arch/sparc64/lib/copy_page.S b/arch/sparc64/lib/copy_page.S index 23ebf2c970b7..feebb14fd27a 100644 --- a/arch/sparc64/lib/copy_page.S +++ b/arch/sparc64/lib/copy_page.S @@ -87,7 +87,7 @@ copy_user_page: /* %o0=dest, %o1=src, %o2=vaddr */ membar #Sync wrpr %o2, 0x0, %pstate - BRANCH_IF_ANY_CHEETAH(g3,o2,1f) +cheetah_copy_page_insn: ba,pt %xcc, 9f nop @@ -240,3 +240,14 @@ copy_user_page: /* %o0=dest, %o1=src, %o2=vaddr */ stw %o4, [%g6 + TI_PRE_COUNT] .size copy_user_page, .-copy_user_page + + .globl cheetah_patch_copy_page +cheetah_patch_copy_page: + sethi %hi(0x01000000), %o1 ! NOP + sethi %hi(cheetah_copy_page_insn), %o0 + or %o0, %lo(cheetah_copy_page_insn), %o0 + stw %o1, [%o0] + membar #StoreStore + flush %o0 + retl + nop -- cgit v1.2.2 From 3c2cafaf50a0f9e7efe2b3f584f3bba6c5ee929a Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 30 Aug 2005 15:11:52 -0700 Subject: [SPARC64]: Do not expand CHEETAH_LOG_ERROR 3 times. We only need to expand this thing once, saving some text section space. Signed-off-by: David S. Miller --- arch/sparc64/kernel/entry.S | 309 +++++++++++++++++++++++++------------------- 1 file changed, 173 insertions(+), 136 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S index cecdc0a7521f..3e0badb820c5 100644 --- a/arch/sparc64/kernel/entry.S +++ b/arch/sparc64/kernel/entry.S @@ -927,139 +927,6 @@ __spitfire_insn_access_exception: ba,pt %xcc, rtrap clr %l6 - /* Capture I/D/E-cache state into per-cpu error scoreboard. - * - * %g1: (TL>=0) ? 1 : 0 - * %g2: scratch - * %g3: scratch - * %g4: AFSR - * %g5: AFAR - * %g6: current thread ptr - * %g7: scratch - */ -#define CHEETAH_LOG_ERROR \ - /* Put "TL1" software bit into AFSR. */ \ - and %g1, 0x1, %g1; \ - sllx %g1, 63, %g2; \ - or %g4, %g2, %g4; \ - /* Get log entry pointer for this cpu at this trap level. */ \ - BRANCH_IF_JALAPENO(g2,g3,50f) \ - ldxa [%g0] ASI_SAFARI_CONFIG, %g2; \ - srlx %g2, 17, %g2; \ - ba,pt %xcc, 60f; \ - and %g2, 0x3ff, %g2; \ -50: ldxa [%g0] ASI_JBUS_CONFIG, %g2; \ - srlx %g2, 17, %g2; \ - and %g2, 0x1f, %g2; \ -60: sllx %g2, 9, %g2; \ - sethi %hi(cheetah_error_log), %g3; \ - ldx [%g3 + %lo(cheetah_error_log)], %g3; \ - brz,pn %g3, 80f; \ - nop; \ - add %g3, %g2, %g3; \ - sllx %g1, 8, %g1; \ - add %g3, %g1, %g1; \ - /* %g1 holds pointer to the top of the logging scoreboard */ \ - ldx [%g1 + 0x0], %g7; \ - cmp %g7, -1; \ - bne,pn %xcc, 80f; \ - nop; \ - stx %g4, [%g1 + 0x0]; \ - stx %g5, [%g1 + 0x8]; \ - add %g1, 0x10, %g1; \ - /* %g1 now points to D-cache logging area */ \ - set 0x3ff8, %g2; /* DC_addr mask */ \ - and %g5, %g2, %g2; /* DC_addr bits of AFAR */ \ - srlx %g5, 12, %g3; \ - or %g3, 1, %g3; /* PHYS tag + valid */ \ -10: ldxa [%g2] ASI_DCACHE_TAG, %g7; \ - cmp %g3, %g7; /* TAG match? */ \ - bne,pt %xcc, 13f; \ - nop; \ - /* Yep, what we want, capture state. */ \ - stx %g2, [%g1 + 0x20]; \ - stx %g7, [%g1 + 0x28]; \ - /* A membar Sync is required before and after utag access. */ \ - membar #Sync; \ - ldxa [%g2] ASI_DCACHE_UTAG, %g7; \ - membar #Sync; \ - stx %g7, [%g1 + 0x30]; \ - ldxa [%g2] ASI_DCACHE_SNOOP_TAG, %g7; \ - stx %g7, [%g1 + 0x38]; \ - clr %g3; \ -12: ldxa [%g2 + %g3] ASI_DCACHE_DATA, %g7; \ - stx %g7, [%g1]; \ - add %g3, (1 << 5), %g3; \ - cmp %g3, (4 << 5); \ - bl,pt %xcc, 12b; \ - add %g1, 0x8, %g1; \ - ba,pt %xcc, 20f; \ - add %g1, 0x20, %g1; \ -13: sethi %hi(1 << 14), %g7; \ - add %g2, %g7, %g2; \ - srlx %g2, 14, %g7; \ - cmp %g7, 4; \ - bl,pt %xcc, 10b; \ - nop; \ - add %g1, 0x40, %g1; \ -20: /* %g1 now points to I-cache logging area */ \ - set 0x1fe0, %g2; /* IC_addr mask */ \ - and %g5, %g2, %g2; /* IC_addr bits of AFAR */ \ - sllx %g2, 1, %g2; /* IC_addr[13:6]==VA[12:5] */ \ - srlx %g5, (13 - 8), %g3; /* Make PTAG */ \ - andn %g3, 0xff, %g3; /* Mask off undefined bits */ \ -21: ldxa [%g2] ASI_IC_TAG, %g7; \ - andn %g7, 0xff, %g7; \ - cmp %g3, %g7; \ - bne,pt %xcc, 23f; \ - nop; \ - /* Yep, what we want, capture state. */ \ - stx %g2, [%g1 + 0x40]; \ - stx %g7, [%g1 + 0x48]; \ - add %g2, (1 << 3), %g2; \ - ldxa [%g2] ASI_IC_TAG, %g7; \ - add %g2, (1 << 3), %g2; \ - stx %g7, [%g1 + 0x50]; \ - ldxa [%g2] ASI_IC_TAG, %g7; \ - add %g2, (1 << 3), %g2; \ - stx %g7, [%g1 + 0x60]; \ - ldxa [%g2] ASI_IC_TAG, %g7; \ - stx %g7, [%g1 + 0x68]; \ - sub %g2, (3 << 3), %g2; \ - ldxa [%g2] ASI_IC_STAG, %g7; \ - stx %g7, [%g1 + 0x58]; \ - clr %g3; \ - srlx %g2, 2, %g2; \ -22: ldxa [%g2 + %g3] ASI_IC_INSTR, %g7; \ - stx %g7, [%g1]; \ - add %g3, (1 << 3), %g3; \ - cmp %g3, (8 << 3); \ - bl,pt %xcc, 22b; \ - add %g1, 0x8, %g1; \ - ba,pt %xcc, 30f; \ - add %g1, 0x30, %g1; \ -23: sethi %hi(1 << 14), %g7; \ - add %g2, %g7, %g2; \ - srlx %g2, 14, %g7; \ - cmp %g7, 4; \ - bl,pt %xcc, 21b; \ - nop; \ - add %g1, 0x70, %g1; \ -30: /* %g1 now points to E-cache logging area */ \ - andn %g5, (32 - 1), %g2; /* E-cache subblock */ \ - stx %g2, [%g1 + 0x20]; \ - ldxa [%g2] ASI_EC_TAG_DATA, %g7; \ - stx %g7, [%g1 + 0x28]; \ - ldxa [%g2] ASI_EC_R, %g0; \ - clr %g3; \ -31: ldxa [%g3] ASI_EC_DATA, %g7; \ - stx %g7, [%g1 + %g3]; \ - add %g3, 0x8, %g3; \ - cmp %g3, 0x20; \ - bl,pt %xcc, 31b; \ - nop; \ -80: /* DONE */ - /* These get patched into the trap table at boot time * once we know we have a cheetah processor. */ @@ -1296,6 +1163,170 @@ dcpe_icpe_tl1_common: membar #Sync retry + /* Capture I/D/E-cache state into per-cpu error scoreboard. + * + * %g1: (TL>=0) ? 1 : 0 + * %g2: scratch + * %g3: scratch + * %g4: AFSR + * %g5: AFAR + * %g6: current thread ptr + * %g7: scratch + */ +__cheetah_log_error: + /* Put "TL1" software bit into AFSR. */ + and %g1, 0x1, %g1 + sllx %g1, 63, %g2 + or %g4, %g2, %g4 + + /* Get log entry pointer for this cpu at this trap level. */ + BRANCH_IF_JALAPENO(g2,g3,50f) + ldxa [%g0] ASI_SAFARI_CONFIG, %g2 + srlx %g2, 17, %g2 + ba,pt %xcc, 60f + and %g2, 0x3ff, %g2 + +50: ldxa [%g0] ASI_JBUS_CONFIG, %g2 + srlx %g2, 17, %g2 + and %g2, 0x1f, %g2 + +60: sllx %g2, 9, %g2 + sethi %hi(cheetah_error_log), %g3 + ldx [%g3 + %lo(cheetah_error_log)], %g3 + brz,pn %g3, 80f + nop + + add %g3, %g2, %g3 + sllx %g1, 8, %g1 + add %g3, %g1, %g1 + + /* %g1 holds pointer to the top of the logging scoreboard */ + ldx [%g1 + 0x0], %g7 + cmp %g7, -1 + bne,pn %xcc, 80f + nop + + stx %g4, [%g1 + 0x0] + stx %g5, [%g1 + 0x8] + add %g1, 0x10, %g1 + + /* %g1 now points to D-cache logging area */ + set 0x3ff8, %g2 /* DC_addr mask */ + and %g5, %g2, %g2 /* DC_addr bits of AFAR */ + srlx %g5, 12, %g3 + or %g3, 1, %g3 /* PHYS tag + valid */ + +10: ldxa [%g2] ASI_DCACHE_TAG, %g7 + cmp %g3, %g7 /* TAG match? */ + bne,pt %xcc, 13f + nop + + /* Yep, what we want, capture state. */ + stx %g2, [%g1 + 0x20] + stx %g7, [%g1 + 0x28] + + /* A membar Sync is required before and after utag access. */ + membar #Sync + ldxa [%g2] ASI_DCACHE_UTAG, %g7 + membar #Sync + stx %g7, [%g1 + 0x30] + ldxa [%g2] ASI_DCACHE_SNOOP_TAG, %g7 + stx %g7, [%g1 + 0x38] + clr %g3 + +12: ldxa [%g2 + %g3] ASI_DCACHE_DATA, %g7 + stx %g7, [%g1] + add %g3, (1 << 5), %g3 + cmp %g3, (4 << 5) + bl,pt %xcc, 12b + add %g1, 0x8, %g1 + + ba,pt %xcc, 20f + add %g1, 0x20, %g1 + +13: sethi %hi(1 << 14), %g7 + add %g2, %g7, %g2 + srlx %g2, 14, %g7 + cmp %g7, 4 + bl,pt %xcc, 10b + nop + + add %g1, 0x40, %g1 + + /* %g1 now points to I-cache logging area */ +20: set 0x1fe0, %g2 /* IC_addr mask */ + and %g5, %g2, %g2 /* IC_addr bits of AFAR */ + sllx %g2, 1, %g2 /* IC_addr[13:6]==VA[12:5] */ + srlx %g5, (13 - 8), %g3 /* Make PTAG */ + andn %g3, 0xff, %g3 /* Mask off undefined bits */ + +21: ldxa [%g2] ASI_IC_TAG, %g7 + andn %g7, 0xff, %g7 + cmp %g3, %g7 + bne,pt %xcc, 23f + nop + + /* Yep, what we want, capture state. */ + stx %g2, [%g1 + 0x40] + stx %g7, [%g1 + 0x48] + add %g2, (1 << 3), %g2 + ldxa [%g2] ASI_IC_TAG, %g7 + add %g2, (1 << 3), %g2 + stx %g7, [%g1 + 0x50] + ldxa [%g2] ASI_IC_TAG, %g7 + add %g2, (1 << 3), %g2 + stx %g7, [%g1 + 0x60] + ldxa [%g2] ASI_IC_TAG, %g7 + stx %g7, [%g1 + 0x68] + sub %g2, (3 << 3), %g2 + ldxa [%g2] ASI_IC_STAG, %g7 + stx %g7, [%g1 + 0x58] + clr %g3 + srlx %g2, 2, %g2 + +22: ldxa [%g2 + %g3] ASI_IC_INSTR, %g7 + stx %g7, [%g1] + add %g3, (1 << 3), %g3 + cmp %g3, (8 << 3) + bl,pt %xcc, 22b + add %g1, 0x8, %g1 + + ba,pt %xcc, 30f + add %g1, 0x30, %g1 + +23: sethi %hi(1 << 14), %g7 + add %g2, %g7, %g2 + srlx %g2, 14, %g7 + cmp %g7, 4 + bl,pt %xcc, 21b + nop + + add %g1, 0x70, %g1 + + /* %g1 now points to E-cache logging area */ +30: andn %g5, (32 - 1), %g2 + stx %g2, [%g1 + 0x20] + ldxa [%g2] ASI_EC_TAG_DATA, %g7 + stx %g7, [%g1 + 0x28] + ldxa [%g2] ASI_EC_R, %g0 + clr %g3 + +31: ldxa [%g3] ASI_EC_DATA, %g7 + stx %g7, [%g1 + %g3] + add %g3, 0x8, %g3 + cmp %g3, 0x20 + + bl,pt %xcc, 31b + nop +80: + rdpr %tt, %g2 + cmp %g2, 0x70 + be c_fast_ecc + cmp %g2, 0x63 + be c_cee + nop + ba,pt %xcc, c_deferred + /* Cheetah FECC trap handling, we get here from tl{0,1}_fecc * in the trap table. That code has done a memory barrier * and has disabled both the I-cache and D-cache in the DCU @@ -1321,8 +1352,10 @@ cheetah_fast_ecc: stxa %g4, [%g0] ASI_AFSR membar #Sync - CHEETAH_LOG_ERROR + ba,pt %xcc, __cheetah_log_error + nop +c_fast_ecc: rdpr %pil, %g2 wrpr %g0, 15, %pil ba,pt %xcc, etrap_irq @@ -1347,8 +1380,10 @@ cheetah_cee: stxa %g4, [%g0] ASI_AFSR membar #Sync - CHEETAH_LOG_ERROR + ba,pt %xcc, __cheetah_log_error + nop +c_cee: rdpr %pil, %g2 wrpr %g0, 15, %pil ba,pt %xcc, etrap_irq @@ -1373,8 +1408,10 @@ cheetah_deferred_trap: stxa %g4, [%g0] ASI_AFSR membar #Sync - CHEETAH_LOG_ERROR + ba,pt %xcc, __cheetah_log_error + nop +c_deferred: rdpr %pil, %g2 wrpr %g0, 15, %pil ba,pt %xcc, etrap_irq -- cgit v1.2.2 From 2ef27778a26dd828dd0d348ff12d2c180062746e Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 30 Aug 2005 20:21:34 -0700 Subject: [SPARC64]: Preserve nucleus ctx page size during TLB flushes. Signed-off-by: David S. Miller --- arch/sparc64/mm/ultra.S | 39 +++++++++++++++++++++++++-------------- 1 file changed, 25 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/mm/ultra.S b/arch/sparc64/mm/ultra.S index 363770893797..8dfa825eca51 100644 --- a/arch/sparc64/mm/ultra.S +++ b/arch/sparc64/mm/ultra.S @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include @@ -45,6 +46,8 @@ __flush_tlb_mm: /* %o0=(ctx & TAG_CONTEXT_BITS), %o1=SECONDARY_CONTEXT */ nop nop nop + nop + nop .align 32 .globl __flush_tlb_pending @@ -73,6 +76,9 @@ __flush_tlb_pending: retl wrpr %g7, 0x0, %pstate nop + nop + nop + nop .align 32 .globl __flush_tlb_kernel_range @@ -224,16 +230,8 @@ __update_mmu_cache: /* %o0=hw_context, %o1=address, %o2=pte, %o3=fault_code */ or %o5, %o0, %o5 ba,a,pt %xcc, __prefill_itlb - /* Cheetah specific versions, patched at boot time. - * - * This writes of the PRIMARY_CONTEXT register in this file are - * safe even on Cheetah+ and later wrt. the page size fields. - * The nucleus page size fields do not matter because we make - * no data references, and these instructions execute out of a - * locked I-TLB entry sitting in the fully assosciative I-TLB. - * This sequence should also never trap. - */ -__cheetah_flush_tlb_mm: /* 15 insns */ + /* Cheetah specific versions, patched at boot time. */ +__cheetah_flush_tlb_mm: /* 18 insns */ rdpr %pstate, %g7 andn %g7, PSTATE_IE, %g2 wrpr %g2, 0x0, %pstate @@ -241,6 +239,9 @@ __cheetah_flush_tlb_mm: /* 15 insns */ mov PRIMARY_CONTEXT, %o2 mov 0x40, %g3 ldxa [%o2] ASI_DMMU, %g2 + srlx %g2, CTX_PGSZ1_NUC_SHIFT, %o1 + sllx %o1, CTX_PGSZ1_NUC_SHIFT, %o1 + or %o0, %o1, %o0 /* Preserve nucleus page size fields */ stxa %o0, [%o2] ASI_DMMU stxa %g0, [%g3] ASI_DMMU_DEMAP stxa %g0, [%g3] ASI_IMMU_DEMAP @@ -250,7 +251,7 @@ __cheetah_flush_tlb_mm: /* 15 insns */ retl wrpr %g7, 0x0, %pstate -__cheetah_flush_tlb_pending: /* 23 insns */ +__cheetah_flush_tlb_pending: /* 26 insns */ /* %o0 = context, %o1 = nr, %o2 = vaddrs[] */ rdpr %pstate, %g7 sllx %o1, 3, %o1 @@ -259,6 +260,9 @@ __cheetah_flush_tlb_pending: /* 23 insns */ wrpr %g0, 1, %tl mov PRIMARY_CONTEXT, %o4 ldxa [%o4] ASI_DMMU, %g2 + srlx %g2, CTX_PGSZ1_NUC_SHIFT, %o3 + sllx %o3, CTX_PGSZ1_NUC_SHIFT, %o3 + or %o0, %o3, %o0 /* Preserve nucleus page size fields */ stxa %o0, [%o4] ASI_DMMU 1: sub %o1, (1 << 3), %o1 ldx [%o2 + %o1], %o3 @@ -311,14 +315,14 @@ cheetah_patch_cachetlbops: sethi %hi(__cheetah_flush_tlb_mm), %o1 or %o1, %lo(__cheetah_flush_tlb_mm), %o1 call cheetah_patch_one - mov 15, %o2 + mov 18, %o2 sethi %hi(__flush_tlb_pending), %o0 or %o0, %lo(__flush_tlb_pending), %o0 sethi %hi(__cheetah_flush_tlb_pending), %o1 or %o1, %lo(__cheetah_flush_tlb_pending), %o1 call cheetah_patch_one - mov 23, %o2 + mov 26, %o2 #ifdef DCACHE_ALIASING_POSSIBLE sethi %hi(__flush_dcache_page), %o0 @@ -352,9 +356,12 @@ cheetah_patch_cachetlbops: .globl xcall_flush_tlb_mm xcall_flush_tlb_mm: mov PRIMARY_CONTEXT, %g2 - mov 0x40, %g4 ldxa [%g2] ASI_DMMU, %g3 + srlx %g3, CTX_PGSZ1_NUC_SHIFT, %g4 + sllx %g4, CTX_PGSZ1_NUC_SHIFT, %g4 + or %g5, %g4, %g5 /* Preserve nucleus page size fields */ stxa %g5, [%g2] ASI_DMMU + mov 0x40, %g4 stxa %g0, [%g4] ASI_DMMU_DEMAP stxa %g0, [%g4] ASI_IMMU_DEMAP stxa %g3, [%g2] ASI_DMMU @@ -366,6 +373,10 @@ xcall_flush_tlb_pending: sllx %g1, 3, %g1 mov PRIMARY_CONTEXT, %g4 ldxa [%g4] ASI_DMMU, %g2 + srlx %g2, CTX_PGSZ1_NUC_SHIFT, %g4 + sllx %g4, CTX_PGSZ1_NUC_SHIFT, %g4 + or %g5, %g4, %g5 + mov PRIMARY_CONTEXT, %g4 stxa %g5, [%g4] ASI_DMMU 1: sub %g1, (1 << 3), %g1 ldx [%g7 + %g1], %g5 -- cgit v1.2.2 From 5843e37e24d7cf32f7996dd015245633e0790595 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 30 Aug 2005 21:46:19 -0700 Subject: [SPARC64]: Use drivers/Kconfig And move some other stuff into drivers/sbus/char/Kconfig. Signed-off-by: David S. Miller --- arch/sparc64/Kconfig | 328 ++++----------------------------------------------- 1 file changed, 20 insertions(+), 308 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig index 9afd28e2c4d5..17846f4ba9b6 100644 --- a/arch/sparc64/Kconfig +++ b/arch/sparc64/Kconfig @@ -5,6 +5,16 @@ mainmenu "Linux/UltraSPARC Kernel Configuration" +config SPARC64 + bool + default y + help + SPARC is a family of RISC microprocessors designed and marketed by + Sun Microsystems, incorporated. This port covers the newer 64-bit + UltraSPARC. The UltraLinux project maintains both the SPARC32 and + SPARC64 ports; its web page is available at + . + config 64BIT def_bool y @@ -71,75 +81,6 @@ config SYSVIPC_COMPAT menu "General machine setup" -config BBC_I2C - tristate "UltraSPARC-III bootbus i2c controller driver" - depends on PCI - help - The BBC devices on the UltraSPARC III have two I2C controllers. The - first I2C controller connects mainly to configuration PROMs (NVRAM, - CPU configuration, DIMM types, etc.). The second I2C controller - connects to environmental control devices such as fans and - temperature sensors. The second controller also connects to the - smartcard reader, if present. Say Y to enable support for these. - -config VT - bool "Virtual terminal" if EMBEDDED - select INPUT - default y - ---help--- - If you say Y here, you will get support for terminal devices with - display and keyboard devices. These are called "virtual" because you - can run several virtual terminals (also called virtual consoles) on - one physical terminal. This is rather useful, for example one - virtual terminal can collect system messages and warnings, another - one can be used for a text-mode user session, and a third could run - an X session, all in parallel. Switching between virtual terminals - is done with certain key combinations, usually Alt-. - - The setterm command ("man setterm") can be used to change the - properties (such as colors or beeping) of a virtual terminal. The - man page console_codes(4) ("man console_codes") contains the special - character sequences that can be used to change those properties - directly. The fonts used on virtual terminals can be changed with - the setfont ("man setfont") command and the key bindings are defined - with the loadkeys ("man loadkeys") command. - - You need at least one virtual terminal device in order to make use - of your keyboard and monitor. Therefore, only people configuring an - embedded system would want to say N here in order to save some - memory; the only way to log into such a system is then via a serial - or network connection. - - If unsure, say Y, or else you won't be able to do much with your new - shiny Linux system :-) - -config VT_CONSOLE - bool "Support for console on virtual terminal" if EMBEDDED - depends on VT - default y - ---help--- - The system console is the device which receives all kernel messages - and warnings and which allows logins in single user mode. If you - answer Y here, a virtual terminal (the device used to interact with - a physical terminal) can be used as system console. This is the most - common mode of operations, so you should say Y here unless you want - the kernel messages be output only to a serial port (in which case - you should say Y to "Console on serial port", below). - - If you do say Y here, by default the currently visible virtual - terminal (/dev/tty0) will be used as system console. You can change - that with a kernel command line option such as "console=tty3" which - would use the third virtual terminal as system console. (Try "man - bootparam" or see the documentation of your boot loader (lilo or - loadlin) about how to pass options to the kernel at boot time.) - - If unsure, say Y. - -config HW_CONSOLE - bool - depends on VT - default y - config SMP bool "Symmetric multi-processing support" ---help--- @@ -205,17 +146,6 @@ config US2E_FREQ If in doubt, say N. -# Identify this as a Sparc64 build -config SPARC64 - bool - default y - help - SPARC is a family of RISC microprocessors designed and marketed by - Sun Microsystems, incorporated. This port covers the newer 64-bit - UltraSPARC. The UltraLinux project maintains both the SPARC32 and - SPARC64 ports; its web page is available at - . - # Global things across all Sun machines. config RWSEM_GENERIC_SPINLOCK bool @@ -246,6 +176,12 @@ config HUGETLB_PAGE_SIZE_64K endchoice +endmenu + +source "drivers/firmware/Kconfig" + +source "mm/Kconfig" + config GENERIC_ISA_DMA bool default y @@ -344,33 +280,6 @@ config PCI_DOMAINS bool default PCI -config RTC - tristate - depends on PCI - default y - ---help--- - If you say Y here and create a character special file /dev/rtc with - major number 10 and minor number 135 using mknod ("man mknod"), you - will get access to the real time clock (or hardware clock) built - into your computer. - - Every PC has such a clock built in. It can be used to generate - signals from as low as 1Hz up to 8192Hz, and can also be used - as a 24 hour alarm. It reports status information via the file - /proc/driver/rtc and its behaviour is set by various ioctls on - /dev/rtc. - - If you run Linux on a multiprocessor machine and said Y to - "Symmetric Multi Processing" above, you should say Y here to read - and set the RTC in an SMP compatible fashion. - - If you think you have a use for such a device (such as periodic data - sampling), then say Y here, and read - for details. - - To compile this driver as a module, choose M here: the - module will be called rtc. - source "drivers/pci/Kconfig" config SUN_OPENPROMFS @@ -414,6 +323,8 @@ config BINFMT_AOUT32 If you want to run SunOS binaries (see SunOS binary emulation below) or other a.out binaries, say Y. If unsure, say N. +menu "Executable file formats" + source "fs/Kconfig.binfmt" config SUNOS_EMUL @@ -436,74 +347,7 @@ config SOLARIS_EMUL To compile this code as a module, choose M here: the module will be called solaris. -source "drivers/parport/Kconfig" - -config PRINTER - tristate "Parallel printer support" - depends on PARPORT - ---help--- - If you intend to attach a printer to the parallel port of your Linux - box (as opposed to using a serial printer; if the connector at the - printer has 9 or 25 holes ["female"], then it's serial), say Y. - Also read the Printing-HOWTO, available from - . - - It is possible to share one parallel port among several devices - (e.g. printer and ZIP drive) and it is safe to compile the - corresponding drivers into the kernel. - To compile this driver as a module, choose M here and read - . The module will be called lp. - - If you have several parallel ports, you can specify which ports to - use with the "lp" kernel command line option. (Try "man bootparam" - or see the documentation of your boot loader (lilo or loadlin) about - how to pass options to the kernel at boot time.) The syntax of the - "lp" command line option can be found in . - - If you have more than 8 printers, you need to increase the LP_NO - macro in lp.c and the PARPORT_MAX macro in parport.h. - -config PPDEV - tristate "Support for user-space parallel port device drivers" - depends on PARPORT - ---help--- - Saying Y to this adds support for /dev/parport device nodes. This - is needed for programs that want portable access to the parallel - port, for instance deviceid (which displays Plug-and-Play device - IDs). - - This is the parallel port equivalent of SCSI generic support (sg). - It is safe to say N to this -- it is not needed for normal printing - or parallel port CD-ROM/disk support. - - To compile this driver as a module, choose M here: the - module will be called ppdev. - - If unsure, say N. - -config ENVCTRL - tristate "SUNW, envctrl support" - depends on PCI - help - Kernel support for temperature and fan monitoring on Sun SME - machines. - - To compile this driver as a module, choose M here: the - module will be called envctrl. - -config DISPLAY7SEG - tristate "7-Segment Display support" - depends on PCI - ---help--- - This is the driver for the 7-segment display and LED present on - Sun Microsystems CompactPCI models CP1400 and CP1500. - - To compile this driver as a module, choose M here: the - module will be called display7seg. - - If you do not have a CompactPCI model CP1400 or CP1500, or - another UltraSPARC-IIi-cEngine boardset with a 7-segment display, - you should say N to this option. +endmenu config CMDLINE_BOOL bool "Default bootloader kernel arguments" @@ -521,148 +365,16 @@ config CMDLINE NOTE: This option WILL override the PROM bootargs setting! -source "mm/Kconfig" - -endmenu - source "net/Kconfig" -source "drivers/base/Kconfig" - -source "drivers/video/Kconfig" - -source "drivers/serial/Kconfig" +source "drivers/Kconfig" source "drivers/sbus/char/Kconfig" -source "drivers/mtd/Kconfig" - -source "drivers/block/Kconfig" - -source "drivers/ide/Kconfig" - -source "drivers/scsi/Kconfig" - source "drivers/fc4/Kconfig" -source "drivers/md/Kconfig" - -if PCI -source "drivers/message/fusion/Kconfig" -endif - -source "drivers/ieee1394/Kconfig" - -source "drivers/net/Kconfig" - -source "drivers/isdn/Kconfig" - -source "drivers/telephony/Kconfig" - -# This one must be before the filesystem configs. -DaveM - -menu "Unix98 PTY support" - -config UNIX98_PTYS - bool "Unix98 PTY support" - ---help--- - A pseudo terminal (PTY) is a software device consisting of two - halves: a master and a slave. The slave device behaves identical to - a physical terminal; the master device is used by a process to - read data from and write data to the slave, thereby emulating a - terminal. Typical programs for the master side are telnet servers - and xterms. - - Linux has traditionally used the BSD-like names /dev/ptyxx for - masters and /dev/ttyxx for slaves of pseudo terminals. This scheme - has a number of problems. The GNU C library glibc 2.1 and later, - however, supports the Unix98 naming standard: in order to acquire a - pseudo terminal, a process opens /dev/ptmx; the number of the pseudo - terminal is then made available to the process and the pseudo - terminal slave can be accessed as /dev/pts/. What was - traditionally /dev/ttyp2 will then be /dev/pts/2, for example. - - The entries in /dev/pts/ are created on the fly by a virtual - file system; therefore, if you say Y here you should say Y to - "/dev/pts file system for Unix98 PTYs" as well. - - If you want to say Y here, you need to have the C library glibc 2.1 - or later (equal to libc-6.1, check with "ls -l /lib/libc.so.*"). - Read the instructions in pertaining to - pseudo terminals. It's safe to say N. - -config UNIX98_PTY_COUNT - int "Maximum number of Unix98 PTYs in use (0-2048)" - depends on UNIX98_PTYS - default "256" - help - The maximum number of Unix98 PTYs that can be used at any one time. - The default is 256, and should be enough for desktop systems. Server - machines which support incoming telnet/rlogin/ssh connections and/or - serve several X terminals may want to increase this: every incoming - connection and every xterm uses up one PTY. - - When not in use, each additional set of 256 PTYs occupy - approximately 8 KB of kernel memory on 32-bit architectures. - -endmenu - -menu "XFree86 DRI support" - -config DRM - bool "Direct Rendering Manager (XFree86 DRI support)" - help - Kernel-level support for the Direct Rendering Infrastructure (DRI) - introduced in XFree86 4.0. If you say Y here, you need to select - the module that's right for your graphics card from the list below. - These modules provide support for synchronization, security, and - DMA transfers. Please see for more - details. You should also select and configure AGP - (/dev/agpgart) support. - -config DRM_FFB - tristate "Creator/Creator3D" - depends on DRM && BROKEN - help - Choose this option if you have one of Sun's Creator3D-based graphics - and frame buffer cards. Product page at - . - -config DRM_TDFX - tristate "3dfx Banshee/Voodoo3+" - depends on DRM - help - Choose this option if you have a 3dfx Banshee or Voodoo3 (or later), - graphics card. If M is selected, the module will be called tdfx. - -config DRM_R128 - tristate "ATI Rage 128" - depends on DRM - help - Choose this option if you have an ATI Rage 128 graphics card. If M - is selected, the module will be called r128. AGP support for - this card is strongly suggested (unless you have a PCI version). - -endmenu - -source "drivers/input/Kconfig" - -source "drivers/i2c/Kconfig" - -source "drivers/hwmon/Kconfig" - source "fs/Kconfig" -source "drivers/media/Kconfig" - -source "sound/Kconfig" - -source "drivers/usb/Kconfig" - -source "drivers/infiniband/Kconfig" - -source "drivers/char/watchdog/Kconfig" - source "arch/sparc64/oprofile/Kconfig" source "arch/sparc64/Kconfig.debug" -- cgit v1.2.2 From 8a36895c0ddac143b7f0e87d46153f4f75d9fff7 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 31 Aug 2005 15:01:33 -0700 Subject: [SPARC64]: Use 'unsigned long' for port argument to I/O string ops. This kills warnings when building drivers/ide/ide-iops.c and puts us in-line with what other platforms do here. Signed-off-by: David S. Miller --- arch/sparc64/lib/PeeCeeI.c | 77 ++++++++++++++++++++++++++-------------------- 1 file changed, 44 insertions(+), 33 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/lib/PeeCeeI.c b/arch/sparc64/lib/PeeCeeI.c index 3008d536e8c2..3c6cfbb20360 100644 --- a/arch/sparc64/lib/PeeCeeI.c +++ b/arch/sparc64/lib/PeeCeeI.c @@ -7,28 +7,31 @@ #include #include -void outsb(void __iomem *addr, const void *src, unsigned long count) +void outsb(unsigned long __addr, const void *src, unsigned long count) { + void __iomem *addr = (void __iomem *) __addr; const u8 *p = src; - while(count--) + while (count--) outb(*p++, addr); } -void outsw(void __iomem *addr, const void *src, unsigned long count) +void outsw(unsigned long __addr, const void *src, unsigned long count) { - if(count) { + void __iomem *addr = (void __iomem *) __addr; + + if (count) { u16 *ps = (u16 *)src; u32 *pi; - if(((u64)src) & 0x2) { + if (((u64)src) & 0x2) { u16 val = le16_to_cpup(ps); outw(val, addr); ps++; count--; } pi = (u32 *)ps; - while(count >= 2) { + while (count >= 2) { u32 w = le32_to_cpup(pi); pi++; @@ -37,19 +40,21 @@ void outsw(void __iomem *addr, const void *src, unsigned long count) count -= 2; } ps = (u16 *)pi; - if(count) { + if (count) { u16 val = le16_to_cpup(ps); outw(val, addr); } } } -void outsl(void __iomem *addr, const void *src, unsigned long count) +void outsl(unsigned long __addr, const void *src, unsigned long count) { - if(count) { - if((((u64)src) & 0x3) == 0) { + void __iomem *addr = (void __iomem *) __addr; + + if (count) { + if ((((u64)src) & 0x3) == 0) { u32 *p = (u32 *)src; - while(count--) { + while (count--) { u32 val = cpu_to_le32p(p); outl(val, addr); p++; @@ -60,13 +65,13 @@ void outsl(void __iomem *addr, const void *src, unsigned long count) u32 l = 0, l2; u32 *pi; - switch(((u64)src) & 0x3) { + switch (((u64)src) & 0x3) { case 0x2: count -= 1; l = cpu_to_le16p(ps) << 16; ps++; pi = (u32 *)ps; - while(count--) { + while (count--) { l2 = cpu_to_le32p(pi); pi++; outl(((l >> 16) | (l2 << 16)), addr); @@ -86,7 +91,7 @@ void outsl(void __iomem *addr, const void *src, unsigned long count) ps++; l |= (l2 << 16); pi = (u32 *)ps; - while(count--) { + while (count--) { l2 = cpu_to_le32p(pi); pi++; outl(((l >> 8) | (l2 << 24)), addr); @@ -101,7 +106,7 @@ void outsl(void __iomem *addr, const void *src, unsigned long count) pb = (u8 *)src; l = (*pb++ << 24); pi = (u32 *)pb; - while(count--) { + while (count--) { l2 = cpu_to_le32p(pi); pi++; outl(((l >> 24) | (l2 << 8)), addr); @@ -119,16 +124,18 @@ void outsl(void __iomem *addr, const void *src, unsigned long count) } } -void insb(void __iomem *addr, void *dst, unsigned long count) +void insb(unsigned long __addr, void *dst, unsigned long count) { - if(count) { + void __iomem *addr = (void __iomem *) __addr; + + if (count) { u32 *pi; u8 *pb = dst; - while((((unsigned long)pb) & 0x3) && count--) + while ((((unsigned long)pb) & 0x3) && count--) *pb++ = inb(addr); pi = (u32 *)pb; - while(count >= 4) { + while (count >= 4) { u32 w; w = (inb(addr) << 24); @@ -139,23 +146,25 @@ void insb(void __iomem *addr, void *dst, unsigned long count) count -= 4; } pb = (u8 *)pi; - while(count--) + while (count--) *pb++ = inb(addr); } } -void insw(void __iomem *addr, void *dst, unsigned long count) +void insw(unsigned long __addr, void *dst, unsigned long count) { - if(count) { + void __iomem *addr = (void __iomem *) __addr; + + if (count) { u16 *ps = dst; u32 *pi; - if(((unsigned long)ps) & 0x2) { + if (((unsigned long)ps) & 0x2) { *ps++ = le16_to_cpu(inw(addr)); count--; } pi = (u32 *)ps; - while(count >= 2) { + while (count >= 2) { u32 w; w = (le16_to_cpu(inw(addr)) << 16); @@ -164,31 +173,33 @@ void insw(void __iomem *addr, void *dst, unsigned long count) count -= 2; } ps = (u16 *)pi; - if(count) + if (count) *ps = le16_to_cpu(inw(addr)); } } -void insl(void __iomem *addr, void *dst, unsigned long count) +void insl(unsigned long __addr, void *dst, unsigned long count) { - if(count) { - if((((unsigned long)dst) & 0x3) == 0) { + void __iomem *addr = (void __iomem *) __addr; + + if (count) { + if ((((unsigned long)dst) & 0x3) == 0) { u32 *pi = dst; - while(count--) + while (count--) *pi++ = le32_to_cpu(inl(addr)); } else { u32 l = 0, l2, *pi; u16 *ps; u8 *pb; - switch(((unsigned long)dst) & 3) { + switch (((unsigned long)dst) & 3) { case 0x2: ps = dst; count -= 1; l = le32_to_cpu(inl(addr)); *ps++ = l; pi = (u32 *)ps; - while(count--) { + while (count--) { l2 = le32_to_cpu(inl(addr)); *pi++ = (l << 16) | (l2 >> 16); l = l2; @@ -205,7 +216,7 @@ void insl(void __iomem *addr, void *dst, unsigned long count) ps = (u16 *)pb; *ps++ = ((l >> 8) & 0xffff); pi = (u32 *)ps; - while(count--) { + while (count--) { l2 = le32_to_cpu(inl(addr)); *pi++ = (l << 24) | (l2 >> 8); l = l2; @@ -220,7 +231,7 @@ void insl(void __iomem *addr, void *dst, unsigned long count) l = le32_to_cpu(inl(addr)); *pb++ = l >> 24; pi = (u32 *)pb; - while(count--) { + while (count--) { l2 = le32_to_cpu(inl(addr)); *pi++ = (l << 8) | (l2 >> 24); l = l2; -- cgit v1.2.2 From a7a6cac204147634aba7487e4d618b028ff54c0d Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 1 Sep 2005 21:51:26 -0700 Subject: [SPARC]: Kill io_remap_page_range() It's been deprecated long enough and there are no in-tree users any longer. Signed-off-by: David S. Miller --- arch/sparc/kernel/sparc_ksyms.c | 1 - arch/sparc/mm/generic.c | 57 ------------------------------------- arch/sparc64/kernel/pci.c | 3 +- arch/sparc64/kernel/sparc64_ksyms.c | 3 -- arch/sparc64/mm/generic.c | 31 -------------------- 5 files changed, 1 insertion(+), 94 deletions(-) (limited to 'arch') diff --git a/arch/sparc/kernel/sparc_ksyms.c b/arch/sparc/kernel/sparc_ksyms.c index 8faa8dc4de43..5d974a2b735a 100644 --- a/arch/sparc/kernel/sparc_ksyms.c +++ b/arch/sparc/kernel/sparc_ksyms.c @@ -175,7 +175,6 @@ EXPORT_SYMBOL(set_auxio); EXPORT_SYMBOL(get_auxio); #endif EXPORT_SYMBOL(request_fast_irq); -EXPORT_SYMBOL(io_remap_page_range); EXPORT_SYMBOL(io_remap_pfn_range); /* P3: iounit_xxx may be needed, sun4d users */ /* EXPORT_SYMBOL(iounit_map_dma_init); */ diff --git a/arch/sparc/mm/generic.c b/arch/sparc/mm/generic.c index db27eee3bda1..20ccb957fb77 100644 --- a/arch/sparc/mm/generic.c +++ b/arch/sparc/mm/generic.c @@ -16,31 +16,6 @@ #include #include -static inline void forget_pte(pte_t page) -{ -#if 0 /* old 2.4 code */ - if (pte_none(page)) - return; - if (pte_present(page)) { - unsigned long pfn = pte_pfn(page); - struct page *ptpage; - if (!pfn_valid(pfn)) - return; - ptpage = pfn_to_page(pfn); - if (PageReserved(ptpage)) - return; - page_cache_release(ptpage); - return; - } - swap_free(pte_to_swp_entry(page)); -#else - if (!pte_none(page)) { - printk("forget_pte: old mapping existed!\n"); - BUG(); - } -#endif -} - /* Remap IO memory, the same way as remap_pfn_range(), but use * the obio memory space. * @@ -60,7 +35,6 @@ static inline void io_remap_pte_range(struct mm_struct *mm, pte_t * pte, unsigne pte_t oldpage = *pte; pte_clear(mm, address, pte); set_pte(pte, mk_pte_io(offset, prot, space)); - forget_pte(oldpage); address += PAGE_SIZE; offset += PAGE_SIZE; pte++; @@ -88,37 +62,6 @@ static inline int io_remap_pmd_range(struct mm_struct *mm, pmd_t * pmd, unsigned return 0; } -int io_remap_page_range(struct vm_area_struct *vma, unsigned long from, unsigned long offset, unsigned long size, pgprot_t prot, int space) -{ - int error = 0; - pgd_t * dir; - unsigned long beg = from; - unsigned long end = from + size; - struct mm_struct *mm = vma->vm_mm; - - prot = __pgprot(pg_iobits); - offset -= from; - dir = pgd_offset(mm, from); - flush_cache_range(vma, beg, end); - - spin_lock(&mm->page_table_lock); - while (from < end) { - pmd_t *pmd = pmd_alloc(current->mm, dir, from); - error = -ENOMEM; - if (!pmd) - break; - error = io_remap_pmd_range(mm, pmd, from, end - from, offset + from, prot, space); - if (error) - break; - from = (from + PGDIR_SIZE) & PGDIR_MASK; - dir++; - } - spin_unlock(&mm->page_table_lock); - - flush_tlb_range(vma, beg, end); - return error; -} - int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from, unsigned long pfn, unsigned long size, pgprot_t prot) { diff --git a/arch/sparc64/kernel/pci.c b/arch/sparc64/kernel/pci.c index f21c993f8856..ec8bf4012c0c 100644 --- a/arch/sparc64/kernel/pci.c +++ b/arch/sparc64/kernel/pci.c @@ -736,8 +736,7 @@ static void __pci_mmap_set_flags(struct pci_dev *dev, struct vm_area_struct *vma static void __pci_mmap_set_pgprot(struct pci_dev *dev, struct vm_area_struct *vma, enum pci_mmap_state mmap_state) { - /* Our io_remap_page_range/io_remap_pfn_range takes care of this, - do nothing. */ + /* Our io_remap_pfn_range takes care of this, do nothing. */ } /* Perform the actual remap of the pages for a PCI device mapping, as appropriate diff --git a/arch/sparc64/kernel/sparc64_ksyms.c b/arch/sparc64/kernel/sparc64_ksyms.c index a3ea697f1adb..d89fc24808d3 100644 --- a/arch/sparc64/kernel/sparc64_ksyms.c +++ b/arch/sparc64/kernel/sparc64_ksyms.c @@ -88,8 +88,6 @@ extern int svr4_setcontext(svr4_ucontext_t *uc, struct pt_regs *regs); extern int compat_sys_ioctl(unsigned int fd, unsigned int cmd, u32 arg); extern int (*handle_mathemu)(struct pt_regs *, struct fpustate *); extern long sparc32_open(const char __user * filename, int flags, int mode); -extern int io_remap_page_range(struct vm_area_struct *vma, unsigned long from, - unsigned long offset, unsigned long size, pgprot_t prot, int space); extern int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from, unsigned long pfn, unsigned long size, pgprot_t prot); extern void (*prom_palette)(int); @@ -245,7 +243,6 @@ EXPORT_SYMBOL(pci_dma_supported); #endif /* I/O device mmaping on Sparc64. */ -EXPORT_SYMBOL(io_remap_page_range); EXPORT_SYMBOL(io_remap_pfn_range); /* Solaris/SunOS binary compatibility */ diff --git a/arch/sparc64/mm/generic.c b/arch/sparc64/mm/generic.c index 6b31f6117a95..c954d91f01d0 100644 --- a/arch/sparc64/mm/generic.c +++ b/arch/sparc64/mm/generic.c @@ -116,37 +116,6 @@ static inline int io_remap_pud_range(struct mm_struct *mm, pud_t * pud, unsigned return 0; } -int io_remap_page_range(struct vm_area_struct *vma, unsigned long from, unsigned long offset, unsigned long size, pgprot_t prot, int space) -{ - int error = 0; - pgd_t * dir; - unsigned long beg = from; - unsigned long end = from + size; - struct mm_struct *mm = vma->vm_mm; - - prot = __pgprot(pg_iobits); - offset -= from; - dir = pgd_offset(mm, from); - flush_cache_range(vma, beg, end); - - spin_lock(&mm->page_table_lock); - while (from < end) { - pud_t *pud = pud_alloc(mm, dir, from); - error = -ENOMEM; - if (!pud) - break; - error = io_remap_pud_range(mm, pud, from, end - from, offset + from, prot, space); - if (error) - break; - from = (from + PGDIR_SIZE) & PGDIR_MASK; - dir++; - } - flush_tlb_range(vma, beg, end); - spin_unlock(&mm->page_table_lock); - - return error; -} - int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from, unsigned long pfn, unsigned long size, pgprot_t prot) { -- cgit v1.2.2