From cf7b7e0b3718418b38e1c20f5236534402e5a6c0 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Sun, 16 Mar 2008 18:14:16 +0100 Subject: [MIPS] BCM1480: Fix PCI/HT IO access - removed check for enable HT-PCI bridges, because some CFE version init only the needed one and scanning works even with disabled HT links - implemented I/O access behind HT PCI busses - fixed pci_map for IO resource behind PCI bridge Tested with E100 and Tulip driver. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/pci/pci-bcm1480.c | 6 ++++-- arch/mips/pci/pci-bcm1480ht.c | 21 +++++++-------------- 2 files changed, 11 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c index ab68c4318a30..87e2c8f54e2d 100644 --- a/arch/mips/pci/pci-bcm1480.c +++ b/arch/mips/pci/pci-bcm1480.c @@ -185,8 +185,8 @@ static struct resource bcm1480_mem_resource = { static struct resource bcm1480_io_resource = { .name = "BCM1480 PCI I/O", - .start = 0x2c000000UL, - .end = 0x2dffffffUL, + .start = A_BCM1480_PHYS_PCI_IO_MATCH_BYTES, + .end = A_BCM1480_PHYS_PCI_IO_MATCH_BYTES + 0x1ffffffUL, .flags = IORESOURCE_IO, }; @@ -194,6 +194,7 @@ struct pci_controller bcm1480_controller = { .pci_ops = &bcm1480_pci_ops, .mem_resource = &bcm1480_mem_resource, .io_resource = &bcm1480_io_resource, + .io_offset = A_BCM1480_PHYS_PCI_IO_MATCH_BYTES, }; @@ -251,6 +252,7 @@ static int __init bcm1480_pcibios_init(void) bcm1480_controller.io_map_base = (unsigned long) ioremap(A_BCM1480_PHYS_PCI_IO_MATCH_BYTES, 65536); + bcm1480_controller.io_map_base -= bcm1480_controller.io_offset; set_io_port_base(bcm1480_controller.io_map_base); isa_slot_offset = (unsigned long) ioremap(A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES, 1024*1024); diff --git a/arch/mips/pci/pci-bcm1480ht.c b/arch/mips/pci/pci-bcm1480ht.c index 005e7fecab08..f54f45412b0b 100644 --- a/arch/mips/pci/pci-bcm1480ht.c +++ b/arch/mips/pci/pci-bcm1480ht.c @@ -180,8 +180,8 @@ static struct resource bcm1480ht_mem_resource = { static struct resource bcm1480ht_io_resource = { .name = "BCM1480 HT I/O", - .start = 0x00000000UL, - .end = 0x01ffffffUL, + .start = A_BCM1480_PHYS_HT_IO_MATCH_BYTES, + .end = A_BCM1480_PHYS_HT_IO_MATCH_BYTES + 0x01ffffffUL, .flags = IORESOURCE_IO, }; @@ -191,29 +191,22 @@ struct pci_controller bcm1480ht_controller = { .io_resource = &bcm1480ht_io_resource, .index = 1, .get_busno = bcm1480ht_pcibios_get_busno, + .io_offset = A_BCM1480_PHYS_HT_IO_MATCH_BYTES, }; static int __init bcm1480ht_pcibios_init(void) { - uint32_t cmdreg; - ht_cfg_space = ioremap(A_BCM1480_PHYS_HT_CFG_MATCH_BITS, 16*1024*1024); - /* - * See if the PCI bus has been configured by the firmware. - */ - cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), - PCI_COMMAND)); - if (!(cmdreg & PCI_COMMAND_MASTER)) { - printk("HT: Skipping HT probe. Bus is not initialized.\n"); - iounmap(ht_cfg_space); - return 1; /* XXX */ - } + /* CFE doesn't always init all HT paths, so we always scan */ bcm1480ht_bus_status |= PCI_BUS_ENABLED; ht_eoi_space = (unsigned long) ioremap(A_BCM1480_PHYS_HT_SPECIAL_MATCH_BYTES, 4 * 1024 * 1024); + bcm1480ht_controller.io_map_base = (unsigned long) + ioremap(A_BCM1480_PHYS_HT_IO_MATCH_BYTES, 65536); + bcm1480ht_controller.io_map_base -= bcm1480ht_controller.io_offset; register_pci_controller(&bcm1480ht_controller); -- cgit v1.2.2