From 5dfb1aa53ec182ceb9a729ffe239a07db7866481 Mon Sep 17 00:00:00 2001
From: Sachin Kamat <sachin.kamat@linaro.org>
Date: Mon, 10 Oct 2011 19:54:53 +0900
Subject: ARM: EXYNOS4: Enable regulator support for HDMI on ORIGEN

Since the DC5V line is connected directly to the HDMI connector,
"hdmi-en" regulator would become a dummy regulator on origen board
(by defining REGULATOR_DUMMY in the kernel config file).

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/mach-origen.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c
index 71db8480bb5a..973cc1992dc0 100644
--- a/arch/arm/mach-exynos4/mach-origen.c
+++ b/arch/arm/mach-exynos4/mach-origen.c
@@ -89,6 +89,8 @@ static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = {
 
 static struct regulator_consumer_supply __initdata ldo3_consumer[] = {
 	REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"), /* MIPI */
+	REGULATOR_SUPPLY("vdd", "exynos4-hdmi"), /* HDMI */
+	REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"), /* HDMI */
 };
 static struct regulator_consumer_supply __initdata ldo6_consumer[] = {
 	REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"), /* MIPI */
@@ -98,6 +100,7 @@ static struct regulator_consumer_supply __initdata ldo7_consumer[] = {
 };
 static struct regulator_consumer_supply __initdata ldo8_consumer[] = {
 	REGULATOR_SUPPLY("vdd", "s5p-adc"), /* ADC */
+	REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"), /* HDMI */
 };
 static struct regulator_consumer_supply __initdata ldo9_consumer[] = {
 	REGULATOR_SUPPLY("dvdd", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
-- 
cgit v1.2.2


From f0e38e3354fa150984400a55955f3b03867b14f3 Mon Sep 17 00:00:00 2001
From: Sachin Kamat <sachin.kamat@linaro.org>
Date: Mon, 10 Oct 2011 19:54:59 +0900
Subject: ARM: EXYNOS4: Register power domains on ORIGEN

This patch registers all the available power domains on ORIGEN board.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/mach-origen.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c
index 973cc1992dc0..311e9db4ddea 100644
--- a/arch/arm/mach-exynos4/mach-origen.c
+++ b/arch/arm/mach-exynos4/mach-origen.c
@@ -604,6 +604,10 @@ static struct platform_device *origen_devices[] __initdata = {
 	&s5p_device_mixer,
 	&exynos4_device_pd[PD_LCD0],
 	&exynos4_device_pd[PD_TV],
+	&exynos4_device_pd[PD_G3D],
+	&exynos4_device_pd[PD_LCD1],
+	&exynos4_device_pd[PD_CAM],
+	&exynos4_device_pd[PD_GPS],
 	&origen_device_gpiokeys,
 	&origen_lcd_hv070wsa,
 };
-- 
cgit v1.2.2


From ad98aaed750bf1a9a2318690055d056572339974 Mon Sep 17 00:00:00 2001
From: Kukjin Kim <kgene.kim@samsung.com>
Date: Mon, 10 Oct 2011 19:55:30 +0900
Subject: ARM: EXYNOS4: Remove useless codes on NURI board

The 'nuri_cm_devices' is defined but not used.

Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/mach-nuri.c | 7 -------
 1 file changed, 7 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/mach-nuri.c b/arch/arm/mach-exynos4/mach-nuri.c
index bbd13f454151..20932ec4ddb3 100644
--- a/arch/arm/mach-exynos4/mach-nuri.c
+++ b/arch/arm/mach-exynos4/mach-nuri.c
@@ -1066,13 +1066,6 @@ static struct platform_device nuri_max8903_device = {
 	},
 };
 
-static struct device *nuri_cm_devices[] = {
-	&s3c_device_i2c5.dev,
-	&s3c_device_adc.dev,
-	NULL, /* Reserved for UART */
-	NULL,
-};
-
 static void __init nuri_power_init(void)
 {
 	int gpio;
-- 
cgit v1.2.2


From ce19de02937772286e5d1f065d3143ec3abce200 Mon Sep 17 00:00:00 2001
From: Peter Korsgaard <jacmet@sunsite.dk>
Date: Mon, 10 Oct 2011 19:55:58 +0900
Subject: ARM: S3C2410: fix S3C_GPIO_SPACE #error message to match reality

S3C_GPIO_SPACE cannont be NON-zero, not zero.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c2410/include/mach/gpio-nrs.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
index 4f7bf3272e87..019ea86057f6 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
@@ -53,7 +53,7 @@
 #define S3C2410_GPIO_M_NR	(32)	/* technically 2. */
 
 #if CONFIG_S3C_GPIO_SPACE != 0
-#error CONFIG_S3C_GPIO_SPACE cannot be zero at the moment
+#error CONFIG_S3C_GPIO_SPACE cannot be nonzero at the moment
 #endif
 
 #define S3C2410_GPIO_NEXT(__gpio) \
-- 
cgit v1.2.2


From 6700397a8164f58a6637fa26d9fd752aa8cf2fd1 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Tue, 11 Oct 2011 08:57:11 +0900
Subject: ARM: S3C64XX: Enable TCM support

The S3C64xx CPUs have TCMs so enable the kernel support for it
on these systems.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/Kconfig | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 52f1027d9cb1..28413d232514 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -715,6 +715,7 @@ config ARCH_S3C64XX
 	select CPU_V6
 	select ARM_VIC
 	select HAVE_CLK
+	select HAVE_TCM
 	select CLKDEV_LOOKUP
 	select NO_IOPORT
 	select ARCH_USES_GETTIMEOFFSET
-- 
cgit v1.2.2


From 18c55cd466c12ede49638822d3a71eb1f24e0d25 Mon Sep 17 00:00:00 2001
From: Heiko Stuebner <heiko@sntech.de>
Date: Wed, 12 Oct 2011 21:34:11 +0900
Subject: ARM: SAMSUNG: Add adc registers for S3C2443/S3C2416

The adc blocks of the S3C2443 and S3C2416 define some
additional registers and bits.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/plat-samsung/include/plat/regs-adc.h | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/plat-samsung/include/plat/regs-adc.h b/arch/arm/plat-samsung/include/plat/regs-adc.h
index 035e8c38d69c..70612100120f 100644
--- a/arch/arm/plat-samsung/include/plat/regs-adc.h
+++ b/arch/arm/plat-samsung/include/plat/regs-adc.h
@@ -20,6 +20,7 @@
 #define S3C2410_ADCDAT0	   S3C2410_ADCREG(0x0C)
 #define S3C2410_ADCDAT1	   S3C2410_ADCREG(0x10)
 #define S3C64XX_ADCUPDN		S3C2410_ADCREG(0x14)
+#define S3C2443_ADCMUX		S3C2410_ADCREG(0x18)
 #define S3C64XX_ADCCLRINT	S3C2410_ADCREG(0x18)
 #define S5P_ADCMUX		S3C2410_ADCREG(0x1C)
 #define S3C64XX_ADCCLRINTPNDNUP	S3C2410_ADCREG(0x20)
@@ -33,6 +34,7 @@
 #define S3C2410_ADCCON_PRSCVLMASK	(0xFF<<6)
 #define S3C2410_ADCCON_SELMUX(x)	(((x)&0x7)<<3)
 #define S3C2410_ADCCON_MUXMASK		(0x7<<3)
+#define S3C2416_ADCCON_RESSEL		(1 << 3)
 #define S3C2410_ADCCON_STDBM		(1<<2)
 #define S3C2410_ADCCON_READ_START	(1<<1)
 #define S3C2410_ADCCON_ENABLE_START	(1<<0)
@@ -40,6 +42,7 @@
 
 
 /* ADCTSC Register Bits */
+#define S3C2443_ADCTSC_UD_SEN		(1 << 8)
 #define S3C2410_ADCTSC_YM_SEN		(1<<7)
 #define S3C2410_ADCTSC_YP_SEN		(1<<6)
 #define S3C2410_ADCTSC_XM_SEN		(1<<5)
-- 
cgit v1.2.2


From df303e0236417ca006e04116f18641dbe4bd704a Mon Sep 17 00:00:00 2001
From: Heiko Stuebner <heiko@sntech.de>
Date: Wed, 12 Oct 2011 21:34:11 +0900
Subject: ARM: SAMSUNG: Fix mux bit modification in s3c_adc_select

The mux bits in the adccon register should be cleared only
if muxing is really done in ADCCON and not another register.

This patch introduces a conditional for this.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/plat-samsung/adc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c
index ee8deef19481..7821055a5046 100644
--- a/arch/arm/plat-samsung/adc.c
+++ b/arch/arm/plat-samsung/adc.c
@@ -98,7 +98,8 @@ static inline void s3c_adc_select(struct adc_device *adc,
 
 	client->select_cb(client, 1);
 
-	con &= ~S3C2410_ADCCON_MUXMASK;
+	if (cpu == TYPE_ADCV1 || cpu == TYPE_ADCV2)
+		con &= ~S3C2410_ADCCON_MUXMASK;
 	con &= ~S3C2410_ADCCON_STDBM;
 	con &= ~S3C2410_ADCCON_STARTMASK;
 
-- 
cgit v1.2.2


From f8c414b516e17328bb1ab359b273c76a2e665b68 Mon Sep 17 00:00:00 2001
From: Heiko Stuebner <heiko@sntech.de>
Date: Wed, 12 Oct 2011 21:34:12 +0900
Subject: ARM: SAMSUNG: Allow overriding of adc device name for S3C24XX

The adc blocks of S3C2443 and S3C2416 contain quirks not present
in the stock S3C24xx adc. Therefore allow them to alter the
device name via s3c_adc_setname.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/plat-samsung/include/plat/adc-core.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-samsung/include/plat/adc-core.h b/arch/arm/plat-samsung/include/plat/adc-core.h
index a281568d5856..a927bee55359 100644
--- a/arch/arm/plat-samsung/include/plat/adc-core.h
+++ b/arch/arm/plat-samsung/include/plat/adc-core.h
@@ -20,7 +20,7 @@
 /* re-define device name depending on support. */
 static inline void s3c_adc_setname(char *name)
 {
-#ifdef CONFIG_SAMSUNG_DEV_ADC
+#if defined(CONFIG_SAMSUNG_DEV_ADC) || defined(CONFIG_PLAT_S3C24XX)
 	s3c_device_adc.name = name;
 #endif
 }
-- 
cgit v1.2.2


From 6247cea2b9c193a845a01381c36e18f11676fdfb Mon Sep 17 00:00:00 2001
From: Heiko Stuebner <heiko@sntech.de>
Date: Wed, 12 Oct 2011 21:34:12 +0900
Subject: ARM: SAMSUNG: Add support s3c2443-adc for S3C2443

The S3C2443-adc is 10 bit wide and has its mux-select
in an extra register at base+0x18

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c2443/s3c2443.c |  3 +++
 arch/arm/plat-samsung/adc.c     | 17 ++++++++++++-----
 2 files changed, 15 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c
index 5df6458ddd42..a22b771b0f36 100644
--- a/arch/arm/mach-s3c2443/s3c2443.c
+++ b/arch/arm/mach-s3c2443/s3c2443.c
@@ -41,6 +41,7 @@
 #include <plat/cpu.h>
 #include <plat/fb-core.h>
 #include <plat/nand-core.h>
+#include <plat/adc-core.h>
 
 static struct map_desc s3c2443_iodesc[] __initdata = {
 	IODESC_ENT(WATCHDOG),
@@ -70,6 +71,8 @@ int __init s3c2443_init(void)
 	s3c_nand_setname("s3c2412-nand");
 	s3c_fb_setname("s3c2443-fb");
 
+	s3c_adc_setname("s3c2443-adc");
+
 	/* change WDT IRQ number */
 	s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
 	s3c_device_wdt.resource[1].end   = IRQ_S3C2443_WDT;
diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c
index 7821055a5046..8d8c4cc023db 100644
--- a/arch/arm/plat-samsung/adc.c
+++ b/arch/arm/plat-samsung/adc.c
@@ -41,6 +41,7 @@
 
 enum s3c_cpu_type {
 	TYPE_ADCV1, /* S3C24XX */
+	TYPE_ADCV11, /* S3C2443 */
 	TYPE_ADCV2, /* S3C64XX, S5P64X0, S5PC100 */
 	TYPE_ADCV3, /* S5PV210, S5PC110, EXYNOS4210 */
 };
@@ -106,6 +107,9 @@ static inline void s3c_adc_select(struct adc_device *adc,
 	if (!client->is_ts) {
 		if (cpu == TYPE_ADCV3)
 			writel(client->channel & 0xf, adc->regs + S5P_ADCMUX);
+		else if (cpu == TYPE_ADCV11)
+			writel(client->channel & 0xf,
+						adc->regs + S3C2443_ADCMUX);
 		else
 			con |= S3C2410_ADCCON_SELMUX(client->channel);
 	}
@@ -294,13 +298,13 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw)
 
 	client->nr_samples--;
 
-	if (cpu != TYPE_ADCV1) {
+	if (cpu == TYPE_ADCV1 || cpu == TYPE_ADCV11) {
+		data0 &= 0x3ff;
+		data1 &= 0x3ff;
+	} else {
 		/* S3C64XX/S5P ADC resolution is 12-bit */
 		data0 &= 0xfff;
 		data1 &= 0xfff;
-	} else {
-		data0 &= 0x3ff;
-		data1 &= 0x3ff;
 	}
 
 	if (client->convert_cb)
@@ -321,7 +325,7 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw)
 	}
 
 exit:
-	if (cpu != TYPE_ADCV1) {
+	if (cpu == TYPE_ADCV2 || cpu == TYPE_ADCV3) {
 		/* Clear ADC interrupt */
 		writel(0, adc->regs + S3C64XX_ADCCLRINT);
 	}
@@ -492,6 +496,9 @@ static struct platform_device_id s3c_adc_driver_ids[] = {
 	{
 		.name           = "s3c24xx-adc",
 		.driver_data    = TYPE_ADCV1,
+	}, {
+		.name		= "s3c2443-adc",
+		.driver_data	= TYPE_ADCV11,
 	}, {
 		.name           = "s3c64xx-adc",
 		.driver_data    = TYPE_ADCV2,
-- 
cgit v1.2.2


From 35cc3cea2c2adb825dbe987000165005d28acaec Mon Sep 17 00:00:00 2001
From: Heiko Stuebner <heiko@sntech.de>
Date: Wed, 12 Oct 2011 21:34:12 +0900
Subject: ARM: SAMSUNG: Add support s3c2416-adc for S3C2416/S3C2450

The ADC of the S3C2416/2450 SoC is 10 or 12 bit wide, has its
source selection in the register base+0x18 and its width
selection in bit 03 of the ADCCON register.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c2416/s3c2416.c |  3 +++
 arch/arm/plat-samsung/adc.c     | 25 +++++++++++++++++++------
 2 files changed, 22 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c
index 3156b7a71371..081ef4cb8688 100644
--- a/arch/arm/mach-s3c2416/s3c2416.c
+++ b/arch/arm/mach-s3c2416/s3c2416.c
@@ -60,6 +60,7 @@
 #include <plat/iic-core.h>
 #include <plat/fb-core.h>
 #include <plat/nand-core.h>
+#include <plat/adc-core.h>
 
 static struct map_desc s3c2416_iodesc[] __initdata = {
 	IODESC_ENT(WATCHDOG),
@@ -97,6 +98,8 @@ int __init s3c2416_init(void)
 
 	s3c_fb_setname("s3c2443-fb");
 
+	s3c_adc_setname("s3c2416-adc");
+
 	register_syscore_ops(&s3c2416_pm_syscore_ops);
 	register_syscore_ops(&s3c24xx_irq_syscore_ops);
 
diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c
index 8d8c4cc023db..33ecd0c9f0c3 100644
--- a/arch/arm/plat-samsung/adc.c
+++ b/arch/arm/plat-samsung/adc.c
@@ -42,6 +42,7 @@
 enum s3c_cpu_type {
 	TYPE_ADCV1, /* S3C24XX */
 	TYPE_ADCV11, /* S3C2443 */
+	TYPE_ADCV12, /* S3C2416, S3C2450 */
 	TYPE_ADCV2, /* S3C64XX, S5P64X0, S5PC100 */
 	TYPE_ADCV3, /* S5PV210, S5PC110, EXYNOS4210 */
 };
@@ -107,7 +108,7 @@ static inline void s3c_adc_select(struct adc_device *adc,
 	if (!client->is_ts) {
 		if (cpu == TYPE_ADCV3)
 			writel(client->channel & 0xf, adc->regs + S5P_ADCMUX);
-		else if (cpu == TYPE_ADCV11)
+		else if (cpu == TYPE_ADCV11 || cpu == TYPE_ADCV12)
 			writel(client->channel & 0xf,
 						adc->regs + S3C2443_ADCMUX);
 		else
@@ -302,7 +303,7 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw)
 		data0 &= 0x3ff;
 		data1 &= 0x3ff;
 	} else {
-		/* S3C64XX/S5P ADC resolution is 12-bit */
+		/* S3C2416/S3C64XX/S5P ADC resolution is 12-bit */
 		data0 &= 0xfff;
 		data1 &= 0xfff;
 	}
@@ -337,6 +338,7 @@ static int s3c_adc_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct adc_device *adc;
 	struct resource *regs;
+	enum s3c_cpu_type cpu = platform_get_device_id(pdev)->driver_data;
 	int ret;
 	unsigned tmp;
 
@@ -399,10 +401,13 @@ static int s3c_adc_probe(struct platform_device *pdev)
 	clk_enable(adc->clk);
 
 	tmp = adc->prescale | S3C2410_ADCCON_PRSCEN;
-	if (platform_get_device_id(pdev)->driver_data != TYPE_ADCV1) {
-		/* Enable 12-bit ADC resolution */
+
+	/* Enable 12-bit ADC resolution */
+	if (cpu == TYPE_ADCV12)
+		tmp |= S3C2416_ADCCON_RESSEL;
+	if (cpu == TYPE_ADCV2 || cpu == TYPE_ADCV3)
 		tmp |= S3C64XX_ADCCON_RESSEL;
-	}
+
 	writel(tmp, adc->regs + S3C2410_ADCCON);
 
 	dev_info(dev, "attached adc driver\n");
@@ -469,6 +474,7 @@ static int s3c_adc_resume(struct device *dev)
 	struct platform_device *pdev = container_of(dev,
 			struct platform_device, dev);
 	struct adc_device *adc = platform_get_drvdata(pdev);
+	enum s3c_cpu_type cpu = platform_get_device_id(pdev)->driver_data;
 	int ret;
 	unsigned long tmp;
 
@@ -479,9 +485,13 @@ static int s3c_adc_resume(struct device *dev)
 	enable_irq(adc->irq);
 
 	tmp = adc->prescale | S3C2410_ADCCON_PRSCEN;
+
 	/* Enable 12-bit ADC resolution */
-	if (platform_get_device_id(pdev)->driver_data != TYPE_ADCV1)
+	if (cpu == TYPE_ADCV12)
+		tmp |= S3C2416_ADCCON_RESSEL;
+	if (cpu == TYPE_ADCV2 || cpu == TYPE_ADCV3)
 		tmp |= S3C64XX_ADCCON_RESSEL;
+
 	writel(tmp, adc->regs + S3C2410_ADCCON);
 
 	return 0;
@@ -499,6 +509,9 @@ static struct platform_device_id s3c_adc_driver_ids[] = {
 	}, {
 		.name		= "s3c2443-adc",
 		.driver_data	= TYPE_ADCV11,
+	}, {
+		.name		= "s3c2416-adc",
+		.driver_data	= TYPE_ADCV12,
 	}, {
 		.name           = "s3c64xx-adc",
 		.driver_data    = TYPE_ADCV2,
-- 
cgit v1.2.2


From df74a28c7a2e50135a960403025a8934e8c471e4 Mon Sep 17 00:00:00 2001
From: Sachin Kamat <sachin.kamat@linaro.org>
Date: Thu, 13 Oct 2011 15:38:21 +0900
Subject: ARM: EXYNOS4: Enable MFC on ORIGEN

This patch enables multi-format codec (MFC) support on ORIGEN board.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/Kconfig       |  3 ++-
 arch/arm/mach-exynos4/mach-origen.c | 14 ++++++++++++++
 2 files changed, 16 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index dd660eb20204..d7491e1f245f 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -251,11 +251,12 @@ config MACH_ORIGEN
 	select S5P_DEV_FIMC3
 	select S5P_DEV_FIMD0
 	select S5P_DEV_I2C_HDMIPHY
+	select S5P_DEV_MFC
 	select S5P_DEV_TV
 	select S5P_DEV_USB_EHCI
-	select EXYNOS4_DEV_PD
 	select SAMSUNG_DEV_BACKLIGHT
 	select SAMSUNG_DEV_PWM
+	select EXYNOS4_DEV_PD
 	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_SDHCI
 	select EXYNOS4_SETUP_USB_PHY
diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c
index 311e9db4ddea..f80b563f2be7 100644
--- a/arch/arm/mach-exynos4/mach-origen.c
+++ b/arch/arm/mach-exynos4/mach-origen.c
@@ -39,6 +39,7 @@
 #include <plat/backlight.h>
 #include <plat/pd.h>
 #include <plat/fb.h>
+#include <plat/mfc.h>
 
 #include <mach/map.h>
 
@@ -601,6 +602,9 @@ static struct platform_device *origen_devices[] __initdata = {
 	&s5p_device_fimd0,
 	&s5p_device_hdmi,
 	&s5p_device_i2c_hdmiphy,
+	&s5p_device_mfc,
+	&s5p_device_mfc_l,
+	&s5p_device_mfc_r,
 	&s5p_device_mixer,
 	&exynos4_device_pd[PD_LCD0],
 	&exynos4_device_pd[PD_TV],
@@ -608,6 +612,7 @@ static struct platform_device *origen_devices[] __initdata = {
 	&exynos4_device_pd[PD_LCD1],
 	&exynos4_device_pd[PD_CAM],
 	&exynos4_device_pd[PD_GPS],
+	&exynos4_device_pd[PD_MFC],
 	&origen_device_gpiokeys,
 	&origen_lcd_hv070wsa,
 };
@@ -645,6 +650,11 @@ static void __init origen_power_init(void)
 	s3c_gpio_setpull(EXYNOS4_GPX0(4), S3C_GPIO_PULL_NONE);
 }
 
+static void __init origen_reserve(void)
+{
+	s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
+}
+
 static void __init origen_machine_init(void)
 {
 	origen_power_init();
@@ -668,11 +678,14 @@ static void __init origen_machine_init(void)
 	s5p_fimd0_set_platdata(&origen_lcd_pdata);
 
 	platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
+
 	s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
 
 	s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev;
 	s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev;
 
+	s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
+
 	samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data);
 }
 
@@ -683,4 +696,5 @@ MACHINE_START(ORIGEN, "ORIGEN")
 	.map_io		= origen_map_io,
 	.init_machine	= origen_machine_init,
 	.timer		= &exynos4_timer,
+	.reserve	= &origen_reserve,
 MACHINE_END
-- 
cgit v1.2.2


From 716e84d139b2e209d8d17d21f09f3a5dc0026537 Mon Sep 17 00:00:00 2001
From: Sylwester Nawrocki <s.nawrocki@samsung.com>
Date: Thu, 13 Oct 2011 15:41:00 +0900
Subject: ARM: EXYNOS4: Add support for M-5MOLS camera on Nuri board

Add voltage regulator and platform data definition for M-5MOLS sensor
and MIPI-CSI receiver drivers. Add CAM power domain dependencies for
FIMC device and set up camera port A GPIO. Configure I2C0 bus timings.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: HeungJun Kim <riverful.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/Kconfig     |   9 +++
 arch/arm/mach-exynos4/mach-nuri.c | 151 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 160 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index d7491e1f245f..4924838e9acc 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -215,6 +215,7 @@ config MACH_UNIVERSAL_C210
 config MACH_NURI
 	bool "Mobile NURI Board"
 	select CPU_EXYNOS4210
+	select S5P_GPIO_INT
 	select S3C_DEV_WDT
 	select S3C_DEV_RTC
 	select S5P_DEV_FIMD0
@@ -224,15 +225,23 @@ config MACH_NURI
 	select S3C_DEV_I2C1
 	select S3C_DEV_I2C3
 	select S3C_DEV_I2C5
+	select S5P_DEV_CSIS0
+	select S5P_DEV_FIMC0
+	select S5P_DEV_FIMC1
+	select S5P_DEV_FIMC2
+	select S5P_DEV_FIMC3
 	select S5P_DEV_MFC
 	select S5P_DEV_USB_EHCI
+	select S5P_SETUP_MIPIPHY
 	select EXYNOS4_DEV_PD
+	select EXYNOS4_SETUP_FIMC
 	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_I2C1
 	select EXYNOS4_SETUP_I2C3
 	select EXYNOS4_SETUP_I2C5
 	select EXYNOS4_SETUP_SDHCI
 	select EXYNOS4_SETUP_USB_PHY
+	select S5P_SETUP_MIPIPHY
 	select SAMSUNG_DEV_PWM
 	select SAMSUNG_DEV_ADC
 	help
diff --git a/arch/arm/mach-exynos4/mach-nuri.c b/arch/arm/mach-exynos4/mach-nuri.c
index 20932ec4ddb3..816a502e9153 100644
--- a/arch/arm/mach-exynos4/mach-nuri.c
+++ b/arch/arm/mach-exynos4/mach-nuri.c
@@ -27,6 +27,9 @@
 #include <linux/pwm_backlight.h>
 
 #include <video/platform_lcd.h>
+#include <media/m5mols.h>
+#include <media/s5p_fimc.h>
+#include <media/v4l2-mediabus.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
@@ -45,6 +48,9 @@
 #include <plat/iic.h>
 #include <plat/mfc.h>
 #include <plat/pd.h>
+#include <plat/fimc-core.h>
+#include <plat/camport.h>
+#include <plat/mipi_csis.h>
 
 #include <mach/map.h>
 
@@ -65,6 +71,8 @@
 enum fixed_regulator_id {
 	FIXED_REG_ID_MMC = 0,
 	FIXED_REG_ID_MAX8903,
+	FIXED_REG_ID_CAM_A28V,
+	FIXED_REG_ID_CAM_12V,
 };
 
 static struct s3c2410_uartcfg nuri_uartcfgs[] __initdata = {
@@ -1110,10 +1118,140 @@ static void __init nuri_ehci_init(void)
 	s5p_ehci_set_platdata(pdata);
 }
 
+/* CAMERA */
+static struct regulator_consumer_supply cam_vdda_supply[] = {
+	REGULATOR_SUPPLY("a_sensor", "0-001f"),
+};
+
+static struct regulator_init_data cam_vdda_reg_init_data = {
+	.constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
+	.num_consumer_supplies = ARRAY_SIZE(cam_vdda_supply),
+	.consumer_supplies = cam_vdda_supply,
+};
+
+static struct fixed_voltage_config cam_vdda_fixed_voltage_cfg = {
+	.supply_name	= "CAM_IO_EN",
+	.microvolts	= 2800000,
+	.gpio		= EXYNOS4_GPE2(1), /* CAM_IO_EN */
+	.enable_high	= 1,
+	.init_data	= &cam_vdda_reg_init_data,
+};
+
+static struct platform_device cam_vdda_fixed_rdev = {
+	.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_A28V,
+	.dev = { .platform_data	= &cam_vdda_fixed_voltage_cfg },
+};
+
+static struct regulator_consumer_supply camera_8m_12v_supply =
+	REGULATOR_SUPPLY("dig_12", "0-001f");
+
+static struct regulator_init_data cam_8m_12v_reg_init_data = {
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &camera_8m_12v_supply,
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS
+	},
+};
+
+static struct fixed_voltage_config cam_8m_12v_fixed_voltage_cfg = {
+	.supply_name	= "8M_1.2V",
+	.microvolts	= 1200000,
+	.gpio		= EXYNOS4_GPE2(5), /* 8M_1.2V_EN */
+	.enable_high	= 1,
+	.init_data	= &cam_8m_12v_reg_init_data,
+};
+
+static struct platform_device cam_8m_12v_fixed_rdev = {
+	.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_12V,
+	.dev = { .platform_data = &cam_8m_12v_fixed_voltage_cfg },
+};
+
+static struct s5p_platform_mipi_csis mipi_csis_platdata = {
+	.clk_rate	= 166000000UL,
+	.lanes		= 2,
+	.alignment	= 32,
+	.hs_settle	= 12,
+	.phy_enable	= s5p_csis_phy_enable,
+};
+
+#define GPIO_CAM_MEGA_RST	EXYNOS4_GPY3(7) /* ISP_RESET */
+#define GPIO_CAM_8M_ISP_INT	EXYNOS4_GPL2(5)
+
+static struct m5mols_platform_data m5mols_platdata = {
+	.gpio_reset = GPIO_CAM_MEGA_RST,
+};
+
+static struct i2c_board_info m5mols_board_info = {
+	I2C_BOARD_INFO("M5MOLS", 0x1F),
+	.platform_data	= &m5mols_platdata,
+};
+
+static struct s5p_fimc_isp_info nuri_camera_sensors[] = {
+	{
+		.flags		= V4L2_MBUS_PCLK_SAMPLE_FALLING |
+				  V4L2_MBUS_VSYNC_ACTIVE_LOW,
+		.bus_type	= FIMC_MIPI_CSI2,
+		.board_info	= &m5mols_board_info,
+		.clk_frequency	= 24000000UL,
+		.csi_data_align	= 32,
+	},
+};
+
+static struct s5p_platform_fimc fimc_md_platdata = {
+	.isp_info	= nuri_camera_sensors,
+	.num_clients	= ARRAY_SIZE(nuri_camera_sensors),
+};
+
+static struct gpio nuri_camera_gpios[] = {
+	{ GPIO_CAM_8M_ISP_INT,	GPIOF_IN,           "8M_ISP_INT"  },
+	{ GPIO_CAM_MEGA_RST,	GPIOF_OUT_INIT_LOW, "CAM_8M_NRST" },
+};
+
+static void nuri_camera_init(void)
+{
+	s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata),
+			 &s5p_device_mipi_csis0);
+	s3c_set_platdata(&fimc_md_platdata,  sizeof(fimc_md_platdata),
+			 &s5p_device_fimc_md);
+
+	if (gpio_request_array(nuri_camera_gpios,
+			       ARRAY_SIZE(nuri_camera_gpios))) {
+		pr_err("%s: GPIO request failed\n", __func__);
+		return;
+	}
+
+	m5mols_board_info.irq = s5p_register_gpio_interrupt(GPIO_CAM_8M_ISP_INT);
+	if (!IS_ERR_VALUE(m5mols_board_info.irq))
+		s3c_gpio_cfgpin(GPIO_CAM_8M_ISP_INT, S3C_GPIO_SFN(0xF));
+	else
+		pr_err("%s: Failed to configure 8M_ISP_INT GPIO\n", __func__);
+
+	/* Free GPIOs controlled directly by the sensor drivers. */
+	gpio_free(GPIO_CAM_MEGA_RST);
+
+	if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A)) {
+		pr_err("%s: Camera port A setup failed\n", __func__);
+		return;
+	}
+	/* Increase drive strength of the sensor clock output */
+	s5p_gpio_set_drvstr(EXYNOS4_GPJ1(3), S5P_GPIO_DRVSTR_LV4);
+}
+
+static struct s3c2410_platform_i2c nuri_i2c0_platdata __initdata = {
+	.frequency	= 400000U,
+	.sda_delay	= 200,
+};
+
 static struct platform_device *nuri_devices[] __initdata = {
 	/* Samsung Platform Devices */
 	&s3c_device_i2c5, /* PMIC should initialize first */
+	&s3c_device_i2c0,
 	&emmc_fixed_voltage,
+	&s5p_device_mipi_csis0,
+	&s5p_device_fimc0,
+	&s5p_device_fimc1,
+	&s5p_device_fimc2,
+	&s5p_device_fimc3,
 	&s5p_device_fimd0,
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc2,
@@ -1130,6 +1268,8 @@ static struct platform_device *nuri_devices[] __initdata = {
 	&s5p_device_mfc_r,
 	&exynos4_device_pd[PD_MFC],
 	&exynos4_device_pd[PD_LCD0],
+	&exynos4_device_pd[PD_CAM],
+	&s5p_device_fimc_md,
 
 	/* NURI Devices */
 	&nuri_gpio_keys,
@@ -1137,6 +1277,8 @@ static struct platform_device *nuri_devices[] __initdata = {
 	&nuri_backlight_device,
 	&max8903_fixed_reg_dev,
 	&nuri_max8903_device,
+	&cam_vdda_fixed_rdev,
+	&cam_8m_12v_fixed_rdev,
 };
 
 static void __init nuri_map_io(void)
@@ -1157,6 +1299,7 @@ static void __init nuri_machine_init(void)
 	nuri_tsp_init();
 	nuri_power_init();
 
+	s3c_i2c0_set_platdata(&nuri_i2c0_platdata);
 	i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
 	s3c_i2c3_set_platdata(&i2c3_data);
 	i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
@@ -1168,6 +1311,8 @@ static void __init nuri_machine_init(void)
 
 	s5p_fimd0_set_platdata(&nuri_fb_pdata);
 
+	nuri_camera_init();
+
 	nuri_ehci_init();
 	clk_xusbxti.rate = 24000000;
 
@@ -1175,6 +1320,12 @@ static void __init nuri_machine_init(void)
 	platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices));
 	s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
 	s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
+
+	s5p_device_fimc0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+	s5p_device_fimc1.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+	s5p_device_fimc2.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+	s5p_device_fimc3.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+	s5p_device_mipi_csis0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
 }
 
 MACHINE_START(NURI, "NURI")
-- 
cgit v1.2.2


From 0d23d059da0f7a2ce4744b2212d64a17057d8424 Mon Sep 17 00:00:00 2001
From: Heiko Stuebner <heiko@sntech.de>
Date: Fri, 14 Oct 2011 15:08:56 +0900
Subject: ARM: S3C2416: Add armdiv_mask constant

The S3C2416/2450 has only 3 bits for the armdiv setting instead
of the 4 bits of the S3C2443.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h | 1 +
 arch/arm/mach-s3c2416/clock.c                           | 2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
index df6434f326f0..c3feff3c0488 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
@@ -65,6 +65,7 @@
 #define S3C2443_CLKDIV0_PREDIV_MASK	(3<<4)
 #define S3C2443_CLKDIV0_PREDIV_SHIFT	(4)
 
+#define S3C2416_CLKDIV0_ARMDIV_MASK	(7 << 9)
 #define S3C2443_CLKDIV0_ARMDIV_MASK	(15<<9)
 #define S3C2443_CLKDIV0_ARMDIV_SHIFT	(9)
 #define S3C2443_CLKDIV0_ARMDIV_1	(0<<9)
diff --git a/arch/arm/mach-s3c2416/clock.c b/arch/arm/mach-s3c2416/clock.c
index 72b7c6274c79..5569def1a107 100644
--- a/arch/arm/mach-s3c2416/clock.c
+++ b/arch/arm/mach-s3c2416/clock.c
@@ -127,7 +127,7 @@ static struct clk hsmmc0_clk = {
 
 static inline unsigned int s3c2416_fclk_div(unsigned long clkcon0)
 {
-	clkcon0 &= 7 << S3C2443_CLKDIV0_ARMDIV_SHIFT;
+	clkcon0 &= S3C2416_CLKDIV0_ARMDIV_MASK;
 
 	return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT];
 }
-- 
cgit v1.2.2


From d9a3bfbd7e80ecf24d2322659d5c0542f9d95e78 Mon Sep 17 00:00:00 2001
From: Heiko Stuebner <heiko@sntech.de>
Date: Fri, 14 Oct 2011 15:08:56 +0900
Subject: ARM: S3C24XX: Add infrastructure to transmit armdiv to common code

This is needed for making the armdiv clock common to S3C2443
and S3C2416/2450.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c2416/clock.c                |  4 +++-
 arch/arm/mach-s3c2443/clock.c                |  4 +++-
 arch/arm/plat-s3c24xx/s3c2443-clock.c        | 12 +++++++++++-
 arch/arm/plat-samsung/include/plat/s3c2443.h |  4 +++-
 4 files changed, 20 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2416/clock.c b/arch/arm/mach-s3c2416/clock.c
index 5569def1a107..3060796b0e7d 100644
--- a/arch/arm/mach-s3c2416/clock.c
+++ b/arch/arm/mach-s3c2416/clock.c
@@ -158,7 +158,9 @@ void __init s3c2416_init_clocks(int xtal)
 
 	clk_epll.parent = &clk_epllref.clk;
 
-	s3c2443_common_init_clocks(xtal, s3c2416_get_pll, s3c2416_fclk_div);
+	s3c2443_common_init_clocks(xtal, s3c2416_get_pll, s3c2416_fclk_div,
+				   armdiv, ARRAY_SIZE(armdiv),
+				   S3C2416_CLKDIV0_ARMDIV_MASK);
 
 	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
 		s3c_register_clksrc(clksrcs[ptr], 1);
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index cd51d04e1de7..88edc55838a1 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -283,7 +283,9 @@ void __init s3c2443_init_clocks(int xtal)
 	clk_epll.rate = s3c2443_get_epll(epllcon, xtal);
 	clk_epll.parent = &clk_epllref.clk;
 
-	s3c2443_common_init_clocks(xtal, s3c2443_get_mpll, s3c2443_fclk_div);
+	s3c2443_common_init_clocks(xtal, s3c2443_get_mpll, s3c2443_fclk_div,
+				   armdiv, ARRAY_SIZE(armdiv),
+				   S3C2443_CLKDIV0_ARMDIV_MASK);
 
 	s3c2443_setup_clocks();
 
diff --git a/arch/arm/plat-s3c24xx/s3c2443-clock.c b/arch/arm/plat-s3c24xx/s3c2443-clock.c
index 07a4c81587ac..3f2117b8c0d4 100644
--- a/arch/arm/plat-s3c24xx/s3c2443-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c2443-clock.c
@@ -160,6 +160,10 @@ static struct clk clk_prediv = {
 	},
 };
 
+static unsigned int *armdiv;
+static int nr_armdiv;
+static int armdivmask;
+
 /* usbhost
  *
  * usb host bus-clock, usually 48MHz to provide USB bus clock timing
@@ -470,10 +474,16 @@ static struct clksrc_clk *clksrcs[] __initdata = {
 };
 
 void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
-				       fdiv_fn get_fdiv)
+				       fdiv_fn get_fdiv,
+				       unsigned int *divs, int nr_divs,
+				       int divmask)
 {
 	int ptr;
 
+	armdiv = divs;
+	nr_armdiv = nr_divs;
+	armdivmask = divmask;
+
 	/* s3c2443 parents h and p clocks from prediv */
 	clk_h.parent = &clk_prediv;
 	clk_p.parent = &clk_prediv;
diff --git a/arch/arm/plat-samsung/include/plat/s3c2443.h b/arch/arm/plat-samsung/include/plat/s3c2443.h
index 4b2ac9a272b2..5fc4ad0fd756 100644
--- a/arch/arm/plat-samsung/include/plat/s3c2443.h
+++ b/arch/arm/plat-samsung/include/plat/s3c2443.h
@@ -40,7 +40,9 @@ typedef unsigned int (*pll_fn)(unsigned int reg, unsigned int base);
 typedef unsigned int (*fdiv_fn)(unsigned long clkcon0);
 
 extern void s3c2443_common_setup_clocks(pll_fn get_mpll, fdiv_fn fdiv);
-extern void s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, fdiv_fn fdiv);
+extern void s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, fdiv_fn fdiv,
+				       unsigned int *divs, int nr_divs,
+				       int divmask);
 
 extern int s3c2443_clkcon_enable_h(struct clk *clk, int enable);
 extern int s3c2443_clkcon_enable_p(struct clk *clk, int enable);
-- 
cgit v1.2.2


From aab08eebdf87d3e6eda5c81f119423af63f5aee1 Mon Sep 17 00:00:00 2001
From: Heiko St?bner <heiko@sntech.de>
Date: Fri, 14 Oct 2011 15:08:56 +0900
Subject: ARM: S3C2443: Move clk_arm and clk_armdiv to common code

The system-layout of the armdiv and armclk is common to
S3C2443/S3C2416/S3C2450 and only differs in the array of
possible dividers. Therefore it is possible to reuse the
clock definitions for all of these SoCs.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c2443/clock.c         | 85 +---------------------------------
 arch/arm/plat-s3c24xx/s3c2443-clock.c | 87 +++++++++++++++++++++++++++++++++++
 2 files changed, 89 insertions(+), 83 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index 88edc55838a1..6fda4bf09cdd 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -61,10 +61,10 @@
  *
  * this clock is sourced from msysclk and can have a number of
  * divider values applied to it to then be fed into armclk.
+ * The real clock definition is done in s3c2443-clock.c,
+ * only the armdiv divisor table must be defined here.
 */
 
-/* armdiv divisor table */
-
 static unsigned int armdiv[16] = {
 	[S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 1,
 	[S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 2,
@@ -83,85 +83,6 @@ static inline unsigned int s3c2443_fclk_div(unsigned long clkcon0)
 	return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT];
 }
 
-static unsigned long s3c2443_armclk_roundrate(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	unsigned long calc;
-	unsigned best = 256; /* bigger than any value */
-	unsigned div;
-	int ptr;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(armdiv); ptr++) {
-		div = armdiv[ptr];
-		calc = parent / div;
-		if (calc <= rate && div < best)
-			best = div;
-	}
-
-	return parent / best;
-}
-
-static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	unsigned long calc;
-	unsigned div;
-	unsigned best = 256; /* bigger than any value */
-	int ptr;
-	int val = -1;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(armdiv); ptr++) {
-		div = armdiv[ptr];
-		calc = parent / div;
-		if (calc <= rate && div < best) {
-			best = div;
-			val = ptr;
-		}
-	}
-
-	if (val >= 0) {
-		unsigned long clkcon0;
-
-		clkcon0 = __raw_readl(S3C2443_CLKDIV0);
-		clkcon0 &= ~S3C2443_CLKDIV0_ARMDIV_MASK;
-		clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT;
-		__raw_writel(clkcon0, S3C2443_CLKDIV0);
-	}
-
-	return (val == -1) ? -EINVAL : 0;
-}
-
-static struct clk clk_armdiv = {
-	.name		= "armdiv",
-	.parent		= &clk_msysclk.clk,
-	.ops		= &(struct clk_ops) {
-		.round_rate = s3c2443_armclk_roundrate,
-		.set_rate = s3c2443_armclk_setrate,
-	},
-};
-
-/* armclk
- *
- * this is the clock fed into the ARM core itself, from armdiv or from hclk.
- */
-
-static struct clk *clk_arm_sources[] = {
-	[0] = &clk_armdiv,
-	[1] = &clk_h,
-};
-
-static struct clksrc_clk clk_arm = {
-	.clk	= {
-		.name		= "armclk",
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_arm_sources,
-		.nr_sources = ARRAY_SIZE(clk_arm_sources),
-	},
-	.reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 },
-};
-
 /* hsspi
  *
  * high-speed spi clock, sourced from esysclk
@@ -260,14 +181,12 @@ static struct clk init_clocks[] = {
 /* clocks to add straight away */
 
 static struct clksrc_clk *clksrcs[] __initdata = {
-	&clk_arm,
 	&clk_hsspi,
 	&clk_hsmmc_div,
 };
 
 static struct clk *clks[] __initdata = {
 	&clk_hsmmc,
-	&clk_armdiv,
 };
 
 void __init_or_cpufreq s3c2443_setup_clocks(void)
diff --git a/arch/arm/plat-s3c24xx/s3c2443-clock.c b/arch/arm/plat-s3c24xx/s3c2443-clock.c
index 3f2117b8c0d4..f9c5b0343cf3 100644
--- a/arch/arm/plat-s3c24xx/s3c2443-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c2443-clock.c
@@ -160,10 +160,95 @@ static struct clk clk_prediv = {
 	},
 };
 
+/* armdiv
+ *
+ * this clock is sourced from msysclk and can have a number of
+ * divider values applied to it to then be fed into armclk.
+*/
+
 static unsigned int *armdiv;
 static int nr_armdiv;
 static int armdivmask;
 
+static unsigned long s3c2443_armclk_roundrate(struct clk *clk,
+					      unsigned long rate)
+{
+	unsigned long parent = clk_get_rate(clk->parent);
+	unsigned long calc;
+	unsigned best = 256; /* bigger than any value */
+	unsigned div;
+	int ptr;
+
+	for (ptr = 0; ptr < nr_armdiv; ptr++) {
+		div = armdiv[ptr];
+		calc = parent / div;
+		if (calc <= rate && div < best)
+			best = div;
+	}
+
+	return parent / best;
+}
+
+static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent = clk_get_rate(clk->parent);
+	unsigned long calc;
+	unsigned div;
+	unsigned best = 256; /* bigger than any value */
+	int ptr;
+	int val = -1;
+
+	for (ptr = 0; ptr < nr_armdiv; ptr++) {
+		div = armdiv[ptr];
+		calc = parent / div;
+		if (calc <= rate && div < best) {
+			best = div;
+			val = ptr;
+		}
+	}
+
+	if (val >= 0) {
+		unsigned long clkcon0;
+
+		clkcon0 = __raw_readl(S3C2443_CLKDIV0);
+		clkcon0 &= ~armdivmask;
+		clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT;
+		__raw_writel(clkcon0, S3C2443_CLKDIV0);
+	}
+
+	return (val == -1) ? -EINVAL : 0;
+}
+
+static struct clk clk_armdiv = {
+	.name		= "armdiv",
+	.parent		= &clk_msysclk.clk,
+	.ops		= &(struct clk_ops) {
+		.round_rate = s3c2443_armclk_roundrate,
+		.set_rate = s3c2443_armclk_setrate,
+	},
+};
+
+/* armclk
+ *
+ * this is the clock fed into the ARM core itself, from armdiv or from hclk.
+ */
+
+static struct clk *clk_arm_sources[] = {
+	[0] = &clk_armdiv,
+	[1] = &clk_h,
+};
+
+static struct clksrc_clk clk_arm = {
+	.clk	= {
+		.name		= "armclk",
+	},
+	.sources = &(struct clksrc_sources) {
+		.sources = clk_arm_sources,
+		.nr_sources = ARRAY_SIZE(clk_arm_sources),
+	},
+	.reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 },
+};
+
 /* usbhost
  *
  * usb host bus-clock, usually 48MHz to provide USB bus clock timing
@@ -462,6 +547,7 @@ static struct clk *clks[] __initdata = {
 	&clk_ext,
 	&clk_epll,
 	&clk_usb_bus,
+	&clk_armdiv,
 };
 
 static struct clksrc_clk *clksrcs[] __initdata = {
@@ -471,6 +557,7 @@ static struct clksrc_clk *clksrcs[] __initdata = {
 	&clk_epllref,
 	&clk_esysclk,
 	&clk_msysclk,
+	&clk_arm,
 };
 
 void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
-- 
cgit v1.2.2


From efb1fb486a8187f02ac4a0170ab45823ebbe58f2 Mon Sep 17 00:00:00 2001
From: Heiko St?bner <heiko@sntech.de>
Date: Fri, 14 Oct 2011 15:08:56 +0900
Subject: ARM: S3C2416: Add comment describing the armdiv/armclk

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c2416/clock.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2416/clock.c b/arch/arm/mach-s3c2416/clock.c
index 3060796b0e7d..7aa0cfa2f9bd 100644
--- a/arch/arm/mach-s3c2416/clock.c
+++ b/arch/arm/mach-s3c2416/clock.c
@@ -28,6 +28,14 @@
 #include <mach/regs-clock.h>
 #include <mach/regs-s3c2443-clock.h>
 
+/* armdiv
+ *
+ * this clock is sourced from msysclk and can have a number of
+ * divider values applied to it to then be fed into armclk.
+ * The real clock definition is done in s3c2443-clock.c,
+ * only the armdiv divisor table must be defined here.
+*/
+
 static unsigned int armdiv[8] = {
 	[0] = 1,
 	[1] = 2,
-- 
cgit v1.2.2


From 5f33bd76f5c4df45cd5b2e4132c6451dac8afee9 Mon Sep 17 00:00:00 2001
From: Heiko Stuebner <heiko@sntech.de>
Date: Fri, 14 Oct 2011 15:08:56 +0900
Subject: ARM: S3C2443: Add get_rate operation for clk_armdiv

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/plat-s3c24xx/s3c2443-clock.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c24xx/s3c2443-clock.c b/arch/arm/plat-s3c24xx/s3c2443-clock.c
index f9c5b0343cf3..fea3d5c0252e 100644
--- a/arch/arm/plat-s3c24xx/s3c2443-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c2443-clock.c
@@ -189,6 +189,19 @@ static unsigned long s3c2443_armclk_roundrate(struct clk *clk,
 	return parent / best;
 }
 
+static unsigned long s3c2443_armclk_getrate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned long clkcon0;
+	int val;
+
+	clkcon0 = __raw_readl(S3C2443_CLKDIV0);
+	clkcon0 &= armdivmask;
+	val = clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT;
+
+	return rate / armdiv[val];
+}
+
 static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate)
 {
 	unsigned long parent = clk_get_rate(clk->parent);
@@ -224,6 +237,7 @@ static struct clk clk_armdiv = {
 	.parent		= &clk_msysclk.clk,
 	.ops		= &(struct clk_ops) {
 		.round_rate = s3c2443_armclk_roundrate,
+		.get_rate = s3c2443_armclk_getrate,
 		.set_rate = s3c2443_armclk_setrate,
 	},
 };
-- 
cgit v1.2.2


From f9f7c7503f7002deffe4cb8409ccada075a52522 Mon Sep 17 00:00:00 2001
From: Heiko Stuebner <heiko@sntech.de>
Date: Fri, 14 Oct 2011 15:08:56 +0900
Subject: ARM: S3C2443: handle unset armdiv values gracefully

The armdiv array may contain unset divider values.
Check the relevant value to prevent division by zero
errors. Also check for set nr_armdiv and armdivmask
before meddling with clkdiv0.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/plat-s3c24xx/s3c2443-clock.c | 27 ++++++++++++++++++++-------
 1 file changed, 20 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c24xx/s3c2443-clock.c b/arch/arm/plat-s3c24xx/s3c2443-clock.c
index fea3d5c0252e..31f97f1bb363 100644
--- a/arch/arm/plat-s3c24xx/s3c2443-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c2443-clock.c
@@ -179,11 +179,16 @@ static unsigned long s3c2443_armclk_roundrate(struct clk *clk,
 	unsigned div;
 	int ptr;
 
+	if (!nr_armdiv)
+		return -EINVAL;
+
 	for (ptr = 0; ptr < nr_armdiv; ptr++) {
 		div = armdiv[ptr];
-		calc = parent / div;
-		if (calc <= rate && div < best)
-			best = div;
+		if (div) {
+			calc = parent / div;
+			if (calc <= rate && div < best)
+				best = div;
+		}
 	}
 
 	return parent / best;
@@ -195,6 +200,9 @@ static unsigned long s3c2443_armclk_getrate(struct clk *clk)
 	unsigned long clkcon0;
 	int val;
 
+	if (!nr_armdiv || !armdivmask)
+		return -EINVAL;
+
 	clkcon0 = __raw_readl(S3C2443_CLKDIV0);
 	clkcon0 &= armdivmask;
 	val = clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT;
@@ -211,12 +219,17 @@ static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate)
 	int ptr;
 	int val = -1;
 
+	if (!nr_armdiv || !armdivmask)
+		return -EINVAL;
+
 	for (ptr = 0; ptr < nr_armdiv; ptr++) {
 		div = armdiv[ptr];
-		calc = parent / div;
-		if (calc <= rate && div < best) {
-			best = div;
-			val = ptr;
+		if (div) {
+			calc = parent / div;
+			if (calc <= rate && div < best) {
+				best = div;
+				val = ptr;
+			}
 		}
 	}
 
-- 
cgit v1.2.2


From 866a1c8c354e613c2bf378a1cd562756d4a32e75 Mon Sep 17 00:00:00 2001
From: Heiko Stuebner <heiko@sntech.de>
Date: Fri, 14 Oct 2011 15:08:57 +0900
Subject: ARM: S3C2443: Accommodate cpufreq frequency scheme in armdiv

Cpufreq uses frequencies in kHz and not Hz, so set_rate and round_rate
would be called with a frequency of 266666000 instead of 266666666 but
the clock functions check for rates smaller or equal to the targetrate.

As the armdiv does not support steps this small we can accommodate
this by simply also setting the last 3 digits of the calculated rate
to zero.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/plat-s3c24xx/s3c2443-clock.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c24xx/s3c2443-clock.c b/arch/arm/plat-s3c24xx/s3c2443-clock.c
index 31f97f1bb363..40a87206400f 100644
--- a/arch/arm/plat-s3c24xx/s3c2443-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c2443-clock.c
@@ -185,7 +185,8 @@ static unsigned long s3c2443_armclk_roundrate(struct clk *clk,
 	for (ptr = 0; ptr < nr_armdiv; ptr++) {
 		div = armdiv[ptr];
 		if (div) {
-			calc = parent / div;
+			/* cpufreq provides 266mhz as 266666000 not 266666666 */
+			calc = (parent / div / 1000) * 1000;
 			if (calc <= rate && div < best)
 				best = div;
 		}
@@ -225,7 +226,8 @@ static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate)
 	for (ptr = 0; ptr < nr_armdiv; ptr++) {
 		div = armdiv[ptr];
 		if (div) {
-			calc = parent / div;
+			/* cpufreq provides 266mhz as 266666000 not 266666666 */
+			calc = (parent / div / 1000) * 1000;
 			if (calc <= rate && div < best) {
 				best = div;
 				val = ptr;
-- 
cgit v1.2.2


From 33ccedfd1b79a7cf649b2991e95bae415c013240 Mon Sep 17 00:00:00 2001
From: Heiko Stuebner <heiko@sntech.de>
Date: Fri, 14 Oct 2011 15:08:57 +0900
Subject: ARM: S3C24XX: use clk_get_rate to init fclk in common_setup_clocks

Previously the fclk rate was calculated by dividing the pll through
the divider value of the armdiv. With a real armdiv clk in place it's
possible to simply read its value, which does essentially the same.

This change makes the whole fdiv_fn function pointers supplied to
s3c2443_common_init_clocks and s3c2443_common_setup_clocks
obsolete, so remove it too.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c2416/clock.c                | 11 ++---------
 arch/arm/mach-s3c2443/clock.c                | 11 ++---------
 arch/arm/plat-s3c24xx/s3c2443-clock.c        |  8 +++-----
 arch/arm/plat-samsung/include/plat/s3c2443.h |  5 ++---
 4 files changed, 9 insertions(+), 26 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2416/clock.c b/arch/arm/mach-s3c2416/clock.c
index 7aa0cfa2f9bd..afbbe8bc21d1 100644
--- a/arch/arm/mach-s3c2416/clock.c
+++ b/arch/arm/mach-s3c2416/clock.c
@@ -133,16 +133,9 @@ static struct clk hsmmc0_clk = {
 	.ctrlbit	= S3C2416_HCLKCON_HSMMC0,
 };
 
-static inline unsigned int s3c2416_fclk_div(unsigned long clkcon0)
-{
-	clkcon0 &= S3C2416_CLKDIV0_ARMDIV_MASK;
-
-	return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT];
-}
-
 void __init_or_cpufreq s3c2416_setup_clocks(void)
 {
-	s3c2443_common_setup_clocks(s3c2416_get_pll, s3c2416_fclk_div);
+	s3c2443_common_setup_clocks(s3c2416_get_pll);
 }
 
 
@@ -166,7 +159,7 @@ void __init s3c2416_init_clocks(int xtal)
 
 	clk_epll.parent = &clk_epllref.clk;
 
-	s3c2443_common_init_clocks(xtal, s3c2416_get_pll, s3c2416_fclk_div,
+	s3c2443_common_init_clocks(xtal, s3c2416_get_pll,
 				   armdiv, ARRAY_SIZE(armdiv),
 				   S3C2416_CLKDIV0_ARMDIV_MASK);
 
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index 6fda4bf09cdd..b93cb96f57a5 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -76,13 +76,6 @@ static unsigned int armdiv[16] = {
 	[S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 16,
 };
 
-static inline unsigned int s3c2443_fclk_div(unsigned long clkcon0)
-{
-	clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK;
-
-	return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT];
-}
-
 /* hsspi
  *
  * high-speed spi clock, sourced from esysclk
@@ -191,7 +184,7 @@ static struct clk *clks[] __initdata = {
 
 void __init_or_cpufreq s3c2443_setup_clocks(void)
 {
-	s3c2443_common_setup_clocks(s3c2443_get_mpll, s3c2443_fclk_div);
+	s3c2443_common_setup_clocks(s3c2443_get_mpll);
 }
 
 void __init s3c2443_init_clocks(int xtal)
@@ -202,7 +195,7 @@ void __init s3c2443_init_clocks(int xtal)
 	clk_epll.rate = s3c2443_get_epll(epllcon, xtal);
 	clk_epll.parent = &clk_epllref.clk;
 
-	s3c2443_common_init_clocks(xtal, s3c2443_get_mpll, s3c2443_fclk_div,
+	s3c2443_common_init_clocks(xtal, s3c2443_get_mpll,
 				   armdiv, ARRAY_SIZE(armdiv),
 				   S3C2443_CLKDIV0_ARMDIV_MASK);
 
diff --git a/arch/arm/plat-s3c24xx/s3c2443-clock.c b/arch/arm/plat-s3c24xx/s3c2443-clock.c
index 40a87206400f..d3ebbeedf6d9 100644
--- a/arch/arm/plat-s3c24xx/s3c2443-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c2443-clock.c
@@ -520,8 +520,7 @@ static inline unsigned long s3c2443_get_hdiv(unsigned long clkcon0)
 
 /* EPLLCON compatible enough to get on/off information */
 
-void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll,
-						   fdiv_fn get_fdiv)
+void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll)
 {
 	unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
 	unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON);
@@ -541,7 +540,7 @@ void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll,
 	pll = get_mpll(mpllcon, xtal);
 	clk_msysclk.clk.rate = pll;
 
-	fclk = pll / get_fdiv(clkdiv0);
+	fclk = clk_get_rate(&clk_armdiv);
 	hclk = s3c2443_prediv_getrate(&clk_prediv);
 	hclk /= s3c2443_get_hdiv(clkdiv0);
 	pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1);
@@ -590,7 +589,6 @@ static struct clksrc_clk *clksrcs[] __initdata = {
 };
 
 void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
-				       fdiv_fn get_fdiv,
 				       unsigned int *divs, int nr_divs,
 				       int divmask)
 {
@@ -620,5 +618,5 @@ void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 
-	s3c2443_common_setup_clocks(get_mpll, get_fdiv);
+	s3c2443_common_setup_clocks(get_mpll);
 }
diff --git a/arch/arm/plat-samsung/include/plat/s3c2443.h b/arch/arm/plat-samsung/include/plat/s3c2443.h
index 5fc4ad0fd756..7fae1a050694 100644
--- a/arch/arm/plat-samsung/include/plat/s3c2443.h
+++ b/arch/arm/plat-samsung/include/plat/s3c2443.h
@@ -37,10 +37,9 @@ extern  int s3c2443_baseclk_add(void);
 struct clk;	/* some files don't need clk.h otherwise */
 
 typedef unsigned int (*pll_fn)(unsigned int reg, unsigned int base);
-typedef unsigned int (*fdiv_fn)(unsigned long clkcon0);
 
-extern void s3c2443_common_setup_clocks(pll_fn get_mpll, fdiv_fn fdiv);
-extern void s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, fdiv_fn fdiv,
+extern void s3c2443_common_setup_clocks(pll_fn get_mpll);
+extern void s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
 				       unsigned int *divs, int nr_divs,
 				       int divmask);
 
-- 
cgit v1.2.2


From 5227a54a0f2c8ff4a0a971aac03511cf5545e1fb Mon Sep 17 00:00:00 2001
From: Heiko Stuebner <heiko@sntech.de>
Date: Fri, 14 Oct 2011 15:35:08 +0900
Subject: ARM: S3C24XX: Add devname for hsmmc1 pclk

S3C2443 uses hsmmc1 as its only hsmmc device and for S3C2416/S3C2450
it's the second hsmmc channel with the same PCLKCON bit.
The hsmmc-if clocks on both systems already got a devname, as did
the hsmmc pclk for hsmmc0 on the S3C2416. So to make it possible to
identify the hsmmc1 pclk on S3C2416 add the correct devname for it.
The sclk name on S3C2443 also is s3c-sdhci.1.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/plat-s3c24xx/s3c2443-clock.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c24xx/s3c2443-clock.c b/arch/arm/plat-s3c24xx/s3c2443-clock.c
index d3ebbeedf6d9..5a21b15b2a97 100644
--- a/arch/arm/plat-s3c24xx/s3c2443-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c2443-clock.c
@@ -426,6 +426,7 @@ static struct clk init_clocks[] = {
 		.ctrlbit	= S3C2443_HCLKCON_DMA5,
 	}, {
 		.name		= "hsmmc",
+		.devname	= "s3c-sdhci.1",
 		.parent		= &clk_h,
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_HSMMC,
-- 
cgit v1.2.2


From ec4f5423b5b63b1a92bce375ed242d2c19767995 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Fri, 14 Oct 2011 15:41:36 +0900
Subject: ARM: S3C2443: Remove redundant s3c_register_clocks call for
 init_clocks

Since commit af337f3e633a198034a99450416257ddf2307497
"ARM: S3C2443: Move parts of the clock code to common clock file",
the init_clocks array is moved to arch/arm/plat-s3c24xx/s3c2443-clock.c.
Now we call s3c_register_clocks for init_clocks in s3c2443_common_init_clocks.

Thus we can remove the empty init_clocks array here and remove the
redundant s3c_register_clocks call for init_clocks in s3c2443_init_clocks.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c2443/clock.c | 7 -------
 1 file changed, 7 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index b93cb96f57a5..1c2c088aa2e8 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -168,9 +168,6 @@ static struct clk init_clocks_off[] = {
 	}
 };
 
-static struct clk init_clocks[] = {
-};
-
 /* clocks to add straight away */
 
 static struct clksrc_clk *clksrcs[] __initdata = {
@@ -206,10 +203,6 @@ void __init s3c2443_init_clocks(int xtal)
 	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
 		s3c_register_clksrc(clksrcs[ptr], 1);
 
-	/* register clocks from clock array */
-
-	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
-
 	/* We must be careful disabling the clocks we are not intending to
 	 * be using at boot time, as subsystems such as the LCD which do
 	 * their own DMA requests to the bus can cause the system to lockup
-- 
cgit v1.2.2


From 0f4e54c64eacab06675a054a861d6e0b7442ec9e Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Tue, 18 Oct 2011 08:39:57 +0900
Subject: ARM: S3C64XX: Fix SoC identification for S3C64xx devices

The IS_SAMSUNG_CPU() macro works by comparing the CPU ID mask exactly with
the CPU ID. This was failing for S3C64xx SoCs as in order to support
identification of the exact device the mask covers both variants of the
chip, meaning that the test would always fail on S3C6410 devices. This in
turn caused the core GPIO subsystem to fail to identify the CPU and not
support any GPIOs, crippling the system.

As a minimally invasive fix change the test for the class to be done by
checking each implementation and oring them together.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/plat-samsung/include/plat/cpu.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 54f370f0fc07..40fd7b6b5e66 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -25,7 +25,6 @@ extern unsigned long samsung_cpu_id;
 
 #define S3C6400_CPU_ID		0x36400000
 #define S3C6410_CPU_ID		0x36410000
-#define S3C64XX_CPU_ID		(S3C6400_CPU_ID & S3C6410_CPU_ID)
 #define S3C64XX_CPU_MASK	0xFFFFF000
 
 #define S5P6440_CPU_ID		0x56440000
@@ -50,7 +49,8 @@ static inline int is_samsung_##name(void)	\
 }
 
 IS_SAMSUNG_CPU(s3c24xx, S3C24XX_CPU_ID, S3C24XX_CPU_MASK)
-IS_SAMSUNG_CPU(s3c64xx, S3C64XX_CPU_ID, S3C64XX_CPU_MASK)
+IS_SAMSUNG_CPU(s3c6400, S3C6400_CPU_ID, S3C64XX_CPU_MASK)
+IS_SAMSUNG_CPU(s3c6410, S3C6410_CPU_ID, S3C64XX_CPU_MASK)
 IS_SAMSUNG_CPU(s5p6440, S5P6440_CPU_ID, S5P64XX_CPU_MASK)
 IS_SAMSUNG_CPU(s5p6450, S5P6450_CPU_ID, S5P64XX_CPU_MASK)
 IS_SAMSUNG_CPU(s5pc100, S5PC100_CPU_ID, S5PC100_CPU_MASK)
@@ -69,7 +69,7 @@ IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
 #endif
 
 #if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
-# define soc_is_s3c64xx()	is_samsung_s3c64xx()
+# define soc_is_s3c64xx()	(is_samsung_s3c6400() || is_samsung_s3c6410())
 #else
 # define soc_is_s3c64xx()	0
 #endif
-- 
cgit v1.2.2


From 3c7241bd36e2a618fe20c91f6c69cc20f2d981f2 Mon Sep 17 00:00:00 2001
From: Leo Yan <leoy@marvell.com>
Date: Mon, 15 Aug 2011 11:09:52 +0800
Subject: ARM: mmp: add sram allocator

On mmp platform, there have two sram banks:
audio sram and internal sram. The audio sram is mainly for audio;
the internal sram is for video, wtm and power management.
So add the sram allocator using genalloc to manage them.

Every sram bank will register its own platform device
info, after the sram allocator create the generic pool
for the sram bank, the user module can use the pool's
name to get the pool handler; then it can use the handler
to alloc/free memory with genalloc APIs.

Signed-off-by: Leo Yan <leoy@marvell.com>
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/Kconfig                      |   1 +
 arch/arm/mach-mmp/Makefile            |   2 +-
 arch/arm/mach-mmp/include/mach/sram.h |  35 +++++++
 arch/arm/mach-mmp/sram.c              | 168 ++++++++++++++++++++++++++++++++++
 4 files changed, 205 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-mmp/include/mach/sram.h
 create mode 100644 arch/arm/mach-mmp/sram.c

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3146ed3f6eca..f03ccaec9701 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -558,6 +558,7 @@ config ARCH_MMP
 	select TICK_ONESHOT
 	select PLAT_PXA
 	select SPARSE_IRQ
+	select GENERIC_ALLOCATOR
 	help
 	  Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
 
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index b0ac942327aa..169c6743bde8 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -7,7 +7,7 @@ obj-y				+= common.o clock.o devices.o time.o
 # SoC support
 obj-$(CONFIG_CPU_PXA168)	+= pxa168.o irq-pxa168.o
 obj-$(CONFIG_CPU_PXA910)	+= pxa910.o irq-pxa168.o
-obj-$(CONFIG_CPU_MMP2)		+= mmp2.o irq-mmp2.o
+obj-$(CONFIG_CPU_MMP2)		+= mmp2.o irq-mmp2.o sram.o
 
 # board support
 obj-$(CONFIG_MACH_ASPENITE)	+= aspenite.o
diff --git a/arch/arm/mach-mmp/include/mach/sram.h b/arch/arm/mach-mmp/include/mach/sram.h
new file mode 100644
index 000000000000..239e0fc1bb1f
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/sram.h
@@ -0,0 +1,35 @@
+/*
+ *  linux/arch/arm/mach-mmp/include/mach/sram.h
+ *
+ *  SRAM Memory Management
+ *
+ *  Copyright (c) 2011 Marvell Semiconductors Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_SRAM_H
+#define __ASM_ARCH_SRAM_H
+
+#include <linux/genalloc.h>
+
+/* ARBITRARY:  SRAM allocations are multiples of this 2^N size */
+#define SRAM_GRANULARITY	512
+
+enum sram_type {
+	MMP_SRAM_UNDEFINED = 0,
+	MMP_ASRAM,
+	MMP_ISRAM,
+};
+
+struct sram_platdata {
+	char *pool_name;
+	int granularity;
+};
+
+extern struct gen_pool *sram_get_gpool(char *pool_name);
+
+#endif /* __ASM_ARCH_SRAM_H */
diff --git a/arch/arm/mach-mmp/sram.c b/arch/arm/mach-mmp/sram.c
new file mode 100644
index 000000000000..4304f9519372
--- /dev/null
+++ b/arch/arm/mach-mmp/sram.c
@@ -0,0 +1,168 @@
+/*
+ *  linux/arch/arm/mach-mmp/sram.c
+ *
+ *  based on mach-davinci/sram.c - DaVinci simple SRAM allocator
+ *
+ *  Copyright (c) 2011 Marvell Semiconductors Inc.
+ *  All Rights Reserved
+ *
+ *  Add for mmp sram support - Leo Yan <leoy@marvell.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/genalloc.h>
+
+#include <mach/sram.h>
+
+struct sram_bank_info {
+	char *pool_name;
+	struct gen_pool *gpool;
+	int granularity;
+
+	phys_addr_t sram_phys;
+	void __iomem *sram_virt;
+	u32 sram_size;
+
+	struct list_head node;
+};
+
+static DEFINE_MUTEX(sram_lock);
+static LIST_HEAD(sram_bank_list);
+
+struct gen_pool *sram_get_gpool(char *pool_name)
+{
+	struct sram_bank_info *info = NULL;
+
+	if (!pool_name)
+		return NULL;
+
+	mutex_lock(&sram_lock);
+
+	list_for_each_entry(info, &sram_bank_list, node)
+		if (!strcmp(pool_name, info->pool_name))
+			break;
+
+	mutex_unlock(&sram_lock);
+
+	if (&info->node == &sram_bank_list)
+		return NULL;
+
+	return info->gpool;
+}
+EXPORT_SYMBOL(sram_get_gpool);
+
+static int __devinit sram_probe(struct platform_device *pdev)
+{
+	struct sram_platdata *pdata = pdev->dev.platform_data;
+	struct sram_bank_info *info;
+	struct resource *res;
+	int ret = 0;
+
+	if (!pdata && !pdata->pool_name)
+		return -ENODEV;
+
+	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "no memory resource defined\n");
+		ret = -ENODEV;
+		goto out;
+	}
+
+	if (!resource_size(res))
+		return 0;
+
+	info->sram_phys   = (phys_addr_t)res->start;
+	info->sram_size   = resource_size(res);
+	info->sram_virt   = ioremap(info->sram_phys, info->sram_size);
+	info->pool_name	  = kstrdup(pdata->pool_name, GFP_KERNEL);
+	info->granularity = pdata->granularity;
+
+	info->gpool = gen_pool_create(ilog2(info->granularity), -1);
+	if (!info->gpool) {
+		dev_err(&pdev->dev, "create pool failed\n");
+		ret = -ENOMEM;
+		goto create_pool_err;
+	}
+
+	ret = gen_pool_add_virt(info->gpool, (unsigned long)info->sram_virt,
+				info->sram_phys, info->sram_size, -1);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "add new chunk failed\n");
+		ret = -ENOMEM;
+		goto add_chunk_err;
+	}
+
+	mutex_lock(&sram_lock);
+	list_add(&info->node, &sram_bank_list);
+	mutex_unlock(&sram_lock);
+
+	platform_set_drvdata(pdev, info);
+
+	dev_info(&pdev->dev, "initialized\n");
+	return 0;
+
+add_chunk_err:
+	gen_pool_destroy(info->gpool);
+create_pool_err:
+	iounmap(info->sram_virt);
+	kfree(info->pool_name);
+out:
+	kfree(info);
+	return ret;
+}
+
+static int __devexit sram_remove(struct platform_device *pdev)
+{
+	struct sram_bank_info *info;
+
+	info = platform_get_drvdata(pdev);
+	if (info == NULL)
+		return -ENODEV;
+
+	mutex_lock(&sram_lock);
+	list_del(&info->node);
+	mutex_unlock(&sram_lock);
+
+	gen_pool_destroy(info->gpool);
+	iounmap(info->sram_virt);
+	kfree(info->pool_name);
+	kfree(info);
+	return 0;
+}
+
+static const struct platform_device_id sram_id_table[] = {
+	{ "asram", MMP_ASRAM },
+	{ "isram", MMP_ISRAM },
+	{ }
+};
+
+static struct platform_driver sram_driver = {
+	.probe		= sram_probe,
+	.remove		= sram_remove,
+	.driver		= {
+		.name	= "mmp-sram",
+	},
+	.id_table	= sram_id_table,
+};
+
+static int __init sram_init(void)
+{
+	return platform_driver_register(&sram_driver);
+}
+core_initcall(sram_init);
+
+MODULE_LICENSE("GPL");
-- 
cgit v1.2.2


From 101bf4c19672b519f6d50a7b11e1e03b25a929b6 Mon Sep 17 00:00:00 2001
From: Leo Yan <leoy@marvell.com>
Date: Mon, 15 Aug 2011 11:09:53 +0800
Subject: ARM: mmp: register audio sram bank

MMP platform has sram for the audio island;
Add the device structure for the audio sram,
and register the audio sram device at init phase.

Signed-off-by: Leo Yan <leoy@marvell.com>
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-mmp/brownstone.c        | 5 +++++
 arch/arm/mach-mmp/include/mach/mmp2.h | 7 +++++++
 arch/arm/mach-mmp/mmp2.c              | 1 +
 3 files changed, 13 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c
index c79162a50f28..db4b5fd4e9d2 100644
--- a/arch/arm/mach-mmp/brownstone.c
+++ b/arch/arm/mach-mmp/brownstone.c
@@ -186,6 +186,10 @@ static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc2 = {
 		| PXA_FLAG_SD_8_BIT_CAPABLE_SLOT,
 };
 
+static struct sram_platdata mmp2_asram_platdata = {
+	.pool_name	= "asram",
+	.granularity	= SRAM_GRANULARITY,
+};
 
 static void __init brownstone_init(void)
 {
@@ -197,6 +201,7 @@ static void __init brownstone_init(void)
 	mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(brownstone_twsi1_info));
 	mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */
 	mmp2_add_sdhost(2, &mmp2_sdh_platdata_mmc2); /* eMMC */
+	mmp2_add_asram(&mmp2_asram_platdata);
 
 	/* enable 5v regulator */
 	platform_device_register(&brownstone_v_5vp_device);
diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h
index de7b88826ad7..c2273287eda4 100644
--- a/arch/arm/mach-mmp/include/mach/mmp2.h
+++ b/arch/arm/mach-mmp/include/mach/mmp2.h
@@ -13,6 +13,7 @@ extern void mmp2_clear_pmic_int(void);
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
 #include <mach/devices.h>
+#include <mach/sram.h>
 
 extern struct pxa_device_desc mmp2_device_uart1;
 extern struct pxa_device_desc mmp2_device_uart2;
@@ -28,6 +29,7 @@ extern struct pxa_device_desc mmp2_device_sdh0;
 extern struct pxa_device_desc mmp2_device_sdh1;
 extern struct pxa_device_desc mmp2_device_sdh2;
 extern struct pxa_device_desc mmp2_device_sdh3;
+extern struct pxa_device_desc mmp2_device_asram;
 
 static inline int mmp2_add_uart(int id)
 {
@@ -85,5 +87,10 @@ static inline int mmp2_add_sdhost(int id, struct sdhci_pxa_platdata *data)
 	return pxa_register_device(d, data, sizeof(*data));
 }
 
+static inline int mmp2_add_asram(struct sram_platdata *data)
+{
+	return pxa_register_device(&mmp2_device_asram, data, sizeof(*data));
+}
+
 #endif /* __ASM_MACH_MMP2_H */
 
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index 079c18861d5c..9d0075475349 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -226,4 +226,5 @@ MMP2_DEVICE(sdh0, "sdhci-pxav3", 0, MMC, 0xd4280000, 0x120);
 MMP2_DEVICE(sdh1, "sdhci-pxav3", 1, MMC2, 0xd4280800, 0x120);
 MMP2_DEVICE(sdh2, "sdhci-pxav3", 2, MMC3, 0xd4281000, 0x120);
 MMP2_DEVICE(sdh3, "sdhci-pxav3", 3, MMC4, 0xd4281800, 0x120);
+MMP2_DEVICE(asram, "asram", -1, NONE, 0xe0000000, 0x4000);
 
-- 
cgit v1.2.2


From bca7ab316edd819edd0e3d59f9ccb26c6b2173f5 Mon Sep 17 00:00:00 2001
From: Leo Yan <leoy@marvell.com>
Date: Mon, 15 Aug 2011 11:09:54 +0800
Subject: ARM: mmp: register internal sram bank

MMP2 have the internal sram, this sram can be allocated
for video, power management and secure processor.

Now the sram usage is:
0xd1000000 ~ 0xd101ffff (128KB) : reserved for secure processor
0xd1020000 ~ 0xd1037fff (96KB)  : for video and PM

Register the internal sram's second half 96KB buffer,
so that video and PM can dynamically alloc/free from it.

Signed-off-by: Leo Yan <leoy@marvell.com>
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-mmp/brownstone.c        | 6 ++++++
 arch/arm/mach-mmp/include/mach/mmp2.h | 6 ++++++
 arch/arm/mach-mmp/mmp2.c              | 2 ++
 3 files changed, 14 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c
index db4b5fd4e9d2..59dcf9df1537 100644
--- a/arch/arm/mach-mmp/brownstone.c
+++ b/arch/arm/mach-mmp/brownstone.c
@@ -191,6 +191,11 @@ static struct sram_platdata mmp2_asram_platdata = {
 	.granularity	= SRAM_GRANULARITY,
 };
 
+static struct sram_platdata mmp2_isram_platdata = {
+	.pool_name	= "isram",
+	.granularity	= SRAM_GRANULARITY,
+};
+
 static void __init brownstone_init(void)
 {
 	mfp_config(ARRAY_AND_SIZE(brownstone_pin_config));
@@ -202,6 +207,7 @@ static void __init brownstone_init(void)
 	mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */
 	mmp2_add_sdhost(2, &mmp2_sdh_platdata_mmc2); /* eMMC */
 	mmp2_add_asram(&mmp2_asram_platdata);
+	mmp2_add_isram(&mmp2_isram_platdata);
 
 	/* enable 5v regulator */
 	platform_device_register(&brownstone_v_5vp_device);
diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h
index c2273287eda4..2f7b2d3c2b18 100644
--- a/arch/arm/mach-mmp/include/mach/mmp2.h
+++ b/arch/arm/mach-mmp/include/mach/mmp2.h
@@ -30,6 +30,7 @@ extern struct pxa_device_desc mmp2_device_sdh1;
 extern struct pxa_device_desc mmp2_device_sdh2;
 extern struct pxa_device_desc mmp2_device_sdh3;
 extern struct pxa_device_desc mmp2_device_asram;
+extern struct pxa_device_desc mmp2_device_isram;
 
 static inline int mmp2_add_uart(int id)
 {
@@ -92,5 +93,10 @@ static inline int mmp2_add_asram(struct sram_platdata *data)
 	return pxa_register_device(&mmp2_device_asram, data, sizeof(*data));
 }
 
+static inline int mmp2_add_isram(struct sram_platdata *data)
+{
+	return pxa_register_device(&mmp2_device_isram, data, sizeof(*data));
+}
+
 #endif /* __ASM_MACH_MMP2_H */
 
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index 9d0075475349..43266c44cb36 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -227,4 +227,6 @@ MMP2_DEVICE(sdh1, "sdhci-pxav3", 1, MMC2, 0xd4280800, 0x120);
 MMP2_DEVICE(sdh2, "sdhci-pxav3", 2, MMC3, 0xd4281000, 0x120);
 MMP2_DEVICE(sdh3, "sdhci-pxav3", 3, MMC4, 0xd4281800, 0x120);
 MMP2_DEVICE(asram, "asram", -1, NONE, 0xe0000000, 0x4000);
+/* 0xd1000000 ~ 0xd101ffff is reserved for secure processor */
+MMP2_DEVICE(isram, "isram", -1, NONE, 0xd1020000, 0x18000);
 
-- 
cgit v1.2.2