From e74e396204bfcb67570ba4517b08f5918e69afea Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 30 Mar 2009 19:07:44 +0900 Subject: percpu: use dynamic percpu allocator as the default percpu allocator This patch makes most !CONFIG_HAVE_SETUP_PER_CPU_AREA archs use dynamic percpu allocator. The first chunk is allocated using embedding helper and 8k is reserved for modules. This ensures that the new allocator behaves almost identically to the original allocator as long as static percpu variables are concerned, so it shouldn't introduce much breakage. s390 and alpha use custom SHIFT_PERCPU_PTR() to work around addressing range limit the addressing model imposes. Unfortunately, this breaks if the address is specified using a variable, so for now, the two archs aren't converted. The following architectures are affected by this change. * sh * arm * cris * mips * sparc(32) * blackfin * avr32 * parisc (broken, under investigation) * m32r * powerpc(32) As this change makes the dynamic allocator the default one, CONFIG_HAVE_DYNAMIC_PER_CPU_AREA is replaced with its invert - CONFIG_HAVE_LEGACY_PER_CPU_AREA, which is added to yet-to-be converted archs. These archs implement their own setup_per_cpu_areas() and the conversion is not trivial. * powerpc(64) * sparc(64) * ia64 * alpha * s390 Boot and batch alloc/free tests on x86_32 with debug code (x86_32 doesn't use default first chunk initialization). Compile tested on sparc(32), powerpc(32), arm and alpha. Kyle McMartin reported that this change breaks parisc. The problem is still under investigation and he is okay with pushing this patch forward and fixing parisc later. [ Impact: use dynamic allocator for most archs w/o custom percpu setup ] Signed-off-by: Tejun Heo Acked-by: Rusty Russell Acked-by: David S. Miller Acked-by: Benjamin Herrenschmidt Acked-by: Martin Schwidefsky Reviewed-by: Christoph Lameter Cc: Paul Mundt Cc: Russell King Cc: Mikael Starvik Cc: Ralf Baechle Cc: Bryan Wu Cc: Kyle McMartin Cc: Matthew Wilcox Cc: Grant Grundler Cc: Hirokazu Takata Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: Heiko Carstens Cc: Ingo Molnar --- arch/alpha/Kconfig | 3 +++ arch/ia64/Kconfig | 3 +++ arch/powerpc/Kconfig | 3 +++ arch/s390/Kconfig | 3 +++ arch/sparc/Kconfig | 3 +++ arch/x86/Kconfig | 3 --- 6 files changed, 15 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 9fb8aae5c391..05d86407188c 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -70,6 +70,9 @@ config AUTO_IRQ_AFFINITY depends on SMP default y +config HAVE_LEGACY_PER_CPU_AREA + def_bool y + source "init/Kconfig" source "kernel/Kconfig.freezer" diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 170042b420d4..328d2f8b8c3f 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -89,6 +89,9 @@ config GENERIC_TIME_VSYSCALL bool default y +config HAVE_LEGACY_PER_CPU_AREA + def_bool y + config HAVE_SETUP_PER_CPU_AREA def_bool y diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index bf6cedfa05db..a774c2acbe69 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -46,6 +46,9 @@ config GENERIC_HARDIRQS_NO__DO_IRQ bool default y +config HAVE_LEGACY_PER_CPU_AREA + def_bool PPC64 + config HAVE_SETUP_PER_CPU_AREA def_bool PPC64 diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index a14dba0e4d67..f4a3cc62d28f 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -75,6 +75,9 @@ config VIRT_CPU_ACCOUNTING config ARCH_SUPPORTS_DEBUG_PAGEALLOC def_bool y +config HAVE_LEGACY_PER_CPU_AREA + def_bool y + mainmenu "Linux Kernel Configuration" config S390 diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 3f8b6a92eabd..7a8698b913fe 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -92,6 +92,9 @@ config AUDIT_ARCH bool default y +config HAVE_LEGACY_PER_CPU_AREA + def_bool y if SPARC64 + config HAVE_SETUP_PER_CPU_AREA def_bool y if SPARC64 diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index d1430ef6b4f9..a48a90076d83 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -149,9 +149,6 @@ config ARCH_HAS_CACHE_LINE_SIZE config HAVE_SETUP_PER_CPU_AREA def_bool y -config HAVE_DYNAMIC_PER_CPU_AREA - def_bool y - config HAVE_CPUMASK_OF_CPU_MAP def_bool X86_64_SMP -- cgit v1.2.2 From 405d967dc70002991f8fc35c20e0d3cbc7614f63 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 24 Jun 2009 15:13:38 +0900 Subject: linker script: throw away .discard section x86 throws away .discard section but no other archs do. Also, .discard is not thrown away while linking modules. Make every arch and module linking throw it away. This will be used to define dummy variables for percpu declarations and definitions. This patch is based on Ivan Kokshaysky's alpha percpu patch. [ Impact: always throw away everything in .discard ] Signed-off-by: Tejun Heo Cc: Ivan Kokshaysky Cc: Richard Henderson Cc: Russell King Cc: Haavard Skinnemoen Cc: Bryan Wu Cc: Mikael Starvik Cc: Jesper Nilsson Cc: David Howells Cc: Yoshinori Sato Cc: Tony Luck Cc: Hirokazu Takata Cc: Geert Uytterhoeven Cc: Michal Simek Cc: Ralf Baechle Cc: Kyle McMartin Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Martin Schwidefsky Cc: Heiko Carstens Cc: Paul Mundt Cc: David S. Miller Cc: Jeff Dike Cc: Chris Zankel Cc: Rusty Russell Cc: Ingo Molnar --- arch/alpha/kernel/vmlinux.lds.S | 1 + arch/arm/kernel/vmlinux.lds.S | 1 + arch/avr32/kernel/vmlinux.lds.S | 1 + arch/blackfin/kernel/vmlinux.lds.S | 1 + arch/cris/kernel/vmlinux.lds.S | 1 + arch/frv/kernel/vmlinux.lds.S | 2 ++ arch/h8300/kernel/vmlinux.lds.S | 1 + arch/ia64/kernel/vmlinux.lds.S | 1 + arch/m32r/kernel/vmlinux.lds.S | 1 + arch/m68k/kernel/vmlinux-std.lds | 1 + arch/m68k/kernel/vmlinux-sun3.lds | 1 + arch/m68knommu/kernel/vmlinux.lds.S | 1 + arch/microblaze/kernel/vmlinux.lds.S | 2 ++ arch/mips/kernel/vmlinux.lds.S | 1 + arch/mn10300/kernel/vmlinux.lds.S | 1 + arch/parisc/kernel/vmlinux.lds.S | 1 + arch/powerpc/kernel/vmlinux.lds.S | 1 + arch/s390/kernel/vmlinux.lds.S | 1 + arch/sh/kernel/vmlinux.lds.S | 1 + arch/sparc/kernel/vmlinux.lds.S | 1 + arch/um/kernel/dyn.lds.S | 2 ++ arch/um/kernel/uml.lds.S | 2 ++ arch/xtensa/kernel/vmlinux.lds.S | 1 + 23 files changed, 27 insertions(+) (limited to 'arch') diff --git a/arch/alpha/kernel/vmlinux.lds.S b/arch/alpha/kernel/vmlinux.lds.S index b9d6568e5f7f..75fe1d6877e9 100644 --- a/arch/alpha/kernel/vmlinux.lds.S +++ b/arch/alpha/kernel/vmlinux.lds.S @@ -139,6 +139,7 @@ SECTIONS EXIT_TEXT EXIT_DATA *(.exitcall.exit) + *(.discard) } .mdebug 0 : { diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 6c0779792546..e256c57b8981 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -82,6 +82,7 @@ SECTIONS EXIT_TEXT EXIT_DATA *(.exitcall.exit) + *(.discard) *(.ARM.exidx.exit.text) *(.ARM.extab.exit.text) #ifndef CONFIG_MMU diff --git a/arch/avr32/kernel/vmlinux.lds.S b/arch/avr32/kernel/vmlinux.lds.S index 7910d41eb886..b8324608ec0c 100644 --- a/arch/avr32/kernel/vmlinux.lds.S +++ b/arch/avr32/kernel/vmlinux.lds.S @@ -131,6 +131,7 @@ SECTIONS /DISCARD/ : { EXIT_DATA *(.exitcall.exit) + *(.discard) } DWARF_DEBUG diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S index 6ac307ca0d80..6e8eabd8f0a6 100644 --- a/arch/blackfin/kernel/vmlinux.lds.S +++ b/arch/blackfin/kernel/vmlinux.lds.S @@ -280,5 +280,6 @@ SECTIONS /DISCARD/ : { *(.exitcall.exit) + *(.discard) } } diff --git a/arch/cris/kernel/vmlinux.lds.S b/arch/cris/kernel/vmlinux.lds.S index 0d2adfc794d4..a3175ebb38cc 100644 --- a/arch/cris/kernel/vmlinux.lds.S +++ b/arch/cris/kernel/vmlinux.lds.S @@ -145,6 +145,7 @@ SECTIONS EXIT_TEXT EXIT_DATA *(.exitcall.exit) + *(.discard) } dram_end = dram_start + (CONFIG_ETRAX_DRAM_SIZE - __CONFIG_ETRAX_VMEM_SIZE)*1024*1024; diff --git a/arch/frv/kernel/vmlinux.lds.S b/arch/frv/kernel/vmlinux.lds.S index 22d9787406ed..64b5a5e4d35e 100644 --- a/arch/frv/kernel/vmlinux.lds.S +++ b/arch/frv/kernel/vmlinux.lds.S @@ -177,6 +177,8 @@ SECTIONS .debug_ranges 0 : { *(.debug_ranges) } .comment 0 : { *(.comment) } + + /DISCARD/ : { *(.discard) } } __kernel_image_size_no_bss = __bss_start - __kernel_image_start; diff --git a/arch/h8300/kernel/vmlinux.lds.S b/arch/h8300/kernel/vmlinux.lds.S index 43a87b9085b6..03d6c0df33db 100644 --- a/arch/h8300/kernel/vmlinux.lds.S +++ b/arch/h8300/kernel/vmlinux.lds.S @@ -154,6 +154,7 @@ SECTIONS } /DISCARD/ : { *(.exitcall.exit) + *(.discard) } .romfs : { diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S index 4a95e86b9ac2..13d958975874 100644 --- a/arch/ia64/kernel/vmlinux.lds.S +++ b/arch/ia64/kernel/vmlinux.lds.S @@ -29,6 +29,7 @@ SECTIONS EXIT_TEXT EXIT_DATA *(.exitcall.exit) + *(.discard) *(.IA_64.unwind.exit.text) *(.IA_64.unwind_info.exit.text) } diff --git a/arch/m32r/kernel/vmlinux.lds.S b/arch/m32r/kernel/vmlinux.lds.S index 4179adf6c624..480a49944cfd 100644 --- a/arch/m32r/kernel/vmlinux.lds.S +++ b/arch/m32r/kernel/vmlinux.lds.S @@ -125,6 +125,7 @@ SECTIONS EXIT_TEXT EXIT_DATA *(.exitcall.exit) + *(.discard) } /* Stabs debugging sections. */ diff --git a/arch/m68k/kernel/vmlinux-std.lds b/arch/m68k/kernel/vmlinux-std.lds index 01d212bb05a6..905a797ada93 100644 --- a/arch/m68k/kernel/vmlinux-std.lds +++ b/arch/m68k/kernel/vmlinux-std.lds @@ -87,6 +87,7 @@ SECTIONS EXIT_TEXT EXIT_DATA *(.exitcall.exit) + *(.discard) } /* Stabs debugging sections. */ diff --git a/arch/m68k/kernel/vmlinux-sun3.lds b/arch/m68k/kernel/vmlinux-sun3.lds index c192f773db96..47d04be322aa 100644 --- a/arch/m68k/kernel/vmlinux-sun3.lds +++ b/arch/m68k/kernel/vmlinux-sun3.lds @@ -82,6 +82,7 @@ __init_begin = .; EXIT_TEXT EXIT_DATA *(.exitcall.exit) + *(.discard) } .crap : { diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S index b7fe505e358d..68111a61a77f 100644 --- a/arch/m68knommu/kernel/vmlinux.lds.S +++ b/arch/m68knommu/kernel/vmlinux.lds.S @@ -188,6 +188,7 @@ SECTIONS { EXIT_TEXT EXIT_DATA *(.exitcall.exit) + *(.discard) } .bss : { diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S index d34d38dcd12c..a207543c5927 100644 --- a/arch/microblaze/kernel/vmlinux.lds.S +++ b/arch/microblaze/kernel/vmlinux.lds.S @@ -162,4 +162,6 @@ SECTIONS { } . = ALIGN(4096); _end = .; + + /DISCARD/ : { *(.discard) } } diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index 58738c8d754f..45901609b741 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -179,6 +179,7 @@ SECTIONS /* Sections to be discarded */ /DISCARD/ : { *(.exitcall.exit) + *(.discard) /* ABI crap starts here */ *(.MIPS.options) diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S index 24de6b90f401..5d9f2f96ad92 100644 --- a/arch/mn10300/kernel/vmlinux.lds.S +++ b/arch/mn10300/kernel/vmlinux.lds.S @@ -146,6 +146,7 @@ SECTIONS /* Sections to be discarded */ /DISCARD/ : { *(.exitcall.exit) + *(.discard) } STABS_DEBUG diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S index fd2cc4fd2b65..ccf58341845a 100644 --- a/arch/parisc/kernel/vmlinux.lds.S +++ b/arch/parisc/kernel/vmlinux.lds.S @@ -240,6 +240,7 @@ SECTIONS /* Sections to be discarded */ /DISCARD/ : { *(.exitcall.exit) + *(.discard) #ifdef CONFIG_64BIT /* temporary hack until binutils is fixed to not emit these * for static binaries diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index 8ef8a14abc95..7fca9355fd3d 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -40,6 +40,7 @@ SECTIONS /* Sections to be discarded. */ /DISCARD/ : { *(.exitcall.exit) + *(.discard) EXIT_DATA } diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S index a53db23ee092..98867dfea469 100644 --- a/arch/s390/kernel/vmlinux.lds.S +++ b/arch/s390/kernel/vmlinux.lds.S @@ -161,6 +161,7 @@ SECTIONS /DISCARD/ : { EXIT_DATA *(.exitcall.exit) + *(.discard) } /* Debugging sections. */ diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S index f53c76acaede..766976d27b21 100644 --- a/arch/sh/kernel/vmlinux.lds.S +++ b/arch/sh/kernel/vmlinux.lds.S @@ -171,6 +171,7 @@ SECTIONS */ /DISCARD/ : { *(.exitcall.exit) + *(.discard) } STABS_DEBUG diff --git a/arch/sparc/kernel/vmlinux.lds.S b/arch/sparc/kernel/vmlinux.lds.S index fcbbd000ec08..d63cf914667d 100644 --- a/arch/sparc/kernel/vmlinux.lds.S +++ b/arch/sparc/kernel/vmlinux.lds.S @@ -175,6 +175,7 @@ SECTIONS EXIT_TEXT EXIT_DATA *(.exitcall.exit) + *(.discard) } STABS_DEBUG diff --git a/arch/um/kernel/dyn.lds.S b/arch/um/kernel/dyn.lds.S index 9975e1ab44fb..2916d6eadffd 100644 --- a/arch/um/kernel/dyn.lds.S +++ b/arch/um/kernel/dyn.lds.S @@ -156,4 +156,6 @@ SECTIONS STABS_DEBUG DWARF_DEBUG + + /DISCARD/ : { *(.discard) } } diff --git a/arch/um/kernel/uml.lds.S b/arch/um/kernel/uml.lds.S index 11b835248b86..1f8a622cabe1 100644 --- a/arch/um/kernel/uml.lds.S +++ b/arch/um/kernel/uml.lds.S @@ -100,4 +100,6 @@ SECTIONS STABS_DEBUG DWARF_DEBUG + + /DISCARD/ : { *(.discard) } } diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S index 41c159cd872f..b1e24638acd7 100644 --- a/arch/xtensa/kernel/vmlinux.lds.S +++ b/arch/xtensa/kernel/vmlinux.lds.S @@ -287,6 +287,7 @@ SECTIONS EXIT_TEXT EXIT_DATA *(.exitcall.exit) + *(.discard) } .xt.lit : { *(.xt.lit) } -- cgit v1.2.2 From fe87f94f341a4b4097285b46f003059b26eb59bf Mon Sep 17 00:00:00 2001 From: Jesper Nilsson Date: Wed, 24 Jun 2009 15:13:41 +0900 Subject: CRIS: Change DEFINE_PER_CPU of current_pgd to be non volatile. The DEFINE_PER_CPU of current_pgd was on CRIS defined using volatile, which is not needed. Remove volatile. Tested on an ARTPEC-3 (CRISv32) board. tj: extern DEFINE_PER_CPU() replaced with DECLARE_PER_CPU() [ Impact: code cleanup ] Signed-off-by: Jesper Nilsson Signed-off-by: Tejun Heo --- arch/cris/include/asm/mmu_context.h | 3 ++- arch/cris/mm/fault.c | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/cris/include/asm/mmu_context.h b/arch/cris/include/asm/mmu_context.h index 72ba08dcfd18..1d45fd6365b7 100644 --- a/arch/cris/include/asm/mmu_context.h +++ b/arch/cris/include/asm/mmu_context.h @@ -17,7 +17,8 @@ extern void switch_mm(struct mm_struct *prev, struct mm_struct *next, * registers like cr3 on the i386 */ -extern volatile DEFINE_PER_CPU(pgd_t *,current_pgd); /* defined in arch/cris/mm/fault.c */ +/* defined in arch/cris/mm/fault.c */ +DECLARE_PER_CPU(pgd_t *, current_pgd); static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) { diff --git a/arch/cris/mm/fault.c b/arch/cris/mm/fault.c index f925115e3250..4a7cdd9ea1ee 100644 --- a/arch/cris/mm/fault.c +++ b/arch/cris/mm/fault.c @@ -29,7 +29,7 @@ extern void die_if_kernel(const char *, struct pt_regs *, long); /* current active page directory */ -volatile DEFINE_PER_CPU(pgd_t *,current_pgd); +DEFINE_PER_CPU(pgd_t *, current_pgd); unsigned long cris_signal_return_page; /* -- cgit v1.2.2 From 204fba4aa303ea4a7bb726a539bf4a5b9e3203d0 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 24 Jun 2009 15:13:45 +0900 Subject: percpu: cleanup percpu array definitions Currently, the following three different ways to define percpu arrays are in use. 1. DEFINE_PER_CPU(elem_type[array_len], array_name); 2. DEFINE_PER_CPU(elem_type, array_name[array_len]); 3. DEFINE_PER_CPU(elem_type, array_name)[array_len]; Unify to #1 which correctly separates the roles of the two parameters and thus allows more flexibility in the way percpu variables are defined. [ Impact: cleanup ] Signed-off-by: Tejun Heo Reviewed-by: Christoph Lameter Cc: Ingo Molnar Cc: Tony Luck Cc: Benjamin Herrenschmidt Cc: Thomas Gleixner Cc: Jeremy Fitzhardinge Cc: linux-mm@kvack.org Cc: Christoph Lameter Cc: David S. Miller --- arch/ia64/kernel/smp.c | 2 +- arch/ia64/sn/kernel/setup.c | 2 +- arch/powerpc/mm/stab.c | 2 +- arch/powerpc/platforms/ps3/smp.c | 2 +- arch/x86/kernel/cpu/cpu_debug.c | 4 ++-- arch/x86/kernel/cpu/mcheck/mce_amd.c | 2 +- arch/x86/kernel/cpu/perf_counter.c | 2 +- 7 files changed, 8 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/smp.c b/arch/ia64/kernel/smp.c index f0c521b0ba4c..94cf78ba28fa 100644 --- a/arch/ia64/kernel/smp.c +++ b/arch/ia64/kernel/smp.c @@ -58,7 +58,7 @@ static struct local_tlb_flush_counts { unsigned int count; } __attribute__((__aligned__(32))) local_tlb_flush_counts[NR_CPUS]; -static DEFINE_PER_CPU(unsigned short, shadow_flush_counts[NR_CPUS]) ____cacheline_aligned; +static DEFINE_PER_CPU(unsigned short [NR_CPUS], shadow_flush_counts) ____cacheline_aligned; #define IPI_CALL_FUNC 0 #define IPI_CPU_STOP 1 diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c index e456f062f241..ece1bf994499 100644 --- a/arch/ia64/sn/kernel/setup.c +++ b/arch/ia64/sn/kernel/setup.c @@ -71,7 +71,7 @@ EXPORT_SYMBOL(sn_rtc_cycles_per_second); DEFINE_PER_CPU(struct sn_hub_info_s, __sn_hub_info); EXPORT_PER_CPU_SYMBOL(__sn_hub_info); -DEFINE_PER_CPU(short, __sn_cnodeid_to_nasid[MAX_COMPACT_NODES]); +DEFINE_PER_CPU(short [MAX_COMPACT_NODES], __sn_cnodeid_to_nasid); EXPORT_PER_CPU_SYMBOL(__sn_cnodeid_to_nasid); DEFINE_PER_CPU(struct nodepda_s *, __sn_nodepda); diff --git a/arch/powerpc/mm/stab.c b/arch/powerpc/mm/stab.c index 98cd1dc2ae75..6e9b69c99856 100644 --- a/arch/powerpc/mm/stab.c +++ b/arch/powerpc/mm/stab.c @@ -31,7 +31,7 @@ struct stab_entry { #define NR_STAB_CACHE_ENTRIES 8 static DEFINE_PER_CPU(long, stab_cache_ptr); -static DEFINE_PER_CPU(long, stab_cache[NR_STAB_CACHE_ENTRIES]); +static DEFINE_PER_CPU(long [NR_STAB_CACHE_ENTRIES], stab_cache); /* * Create a segment table entry for the given esid/vsid pair. diff --git a/arch/powerpc/platforms/ps3/smp.c b/arch/powerpc/platforms/ps3/smp.c index f6e04bcc70ef..51ffde40af2b 100644 --- a/arch/powerpc/platforms/ps3/smp.c +++ b/arch/powerpc/platforms/ps3/smp.c @@ -37,7 +37,7 @@ */ #define MSG_COUNT 4 -static DEFINE_PER_CPU(unsigned int, ps3_ipi_virqs[MSG_COUNT]); +static DEFINE_PER_CPU(unsigned int [MSG_COUNT], ps3_ipi_virqs); static void do_message_pass(int target, int msg) { diff --git a/arch/x86/kernel/cpu/cpu_debug.c b/arch/x86/kernel/cpu/cpu_debug.c index 6b2a52dd0403..dca325c03999 100644 --- a/arch/x86/kernel/cpu/cpu_debug.c +++ b/arch/x86/kernel/cpu/cpu_debug.c @@ -30,8 +30,8 @@ #include #include -static DEFINE_PER_CPU(struct cpu_cpuX_base, cpu_arr[CPU_REG_ALL_BIT]); -static DEFINE_PER_CPU(struct cpu_private *, priv_arr[MAX_CPU_FILES]); +static DEFINE_PER_CPU(struct cpu_cpuX_base [CPU_REG_ALL_BIT], cpu_arr); +static DEFINE_PER_CPU(struct cpu_private * [MAX_CPU_FILES], priv_arr); static DEFINE_PER_CPU(int, cpu_priv_count); static DEFINE_MUTEX(cpu_debug_lock); diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c index ddae21620bda..bd2a2fa84628 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_amd.c +++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c @@ -69,7 +69,7 @@ struct threshold_bank { struct threshold_block *blocks; cpumask_var_t cpus; }; -static DEFINE_PER_CPU(struct threshold_bank *, threshold_banks[NR_BANKS]); +static DEFINE_PER_CPU(struct threshold_bank * [NR_BANKS], threshold_banks); #ifdef CONFIG_SMP static unsigned char shared_bank[NR_BANKS] = { diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c index 76dfef23f789..4946288d6832 100644 --- a/arch/x86/kernel/cpu/perf_counter.c +++ b/arch/x86/kernel/cpu/perf_counter.c @@ -862,7 +862,7 @@ amd_pmu_disable_counter(struct hw_perf_counter *hwc, int idx) x86_pmu_disable_counter(hwc, idx); } -static DEFINE_PER_CPU(u64, prev_left[X86_PMC_IDX_MAX]); +static DEFINE_PER_CPU(u64 [X86_PMC_IDX_MAX], prev_left); /* * Set the next IRQ period, based on the hwc->period_left value. -- cgit v1.2.2 From b9bf3121af348d9255f1c917830fe8c2df52efcb Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 24 Jun 2009 15:13:47 +0900 Subject: percpu: use DEFINE_PER_CPU_SHARED_ALIGNED() There are a few places where ___cacheline_aligned* is used with DEFINE_PER_CPU(). Use DEFINE_PER_CPU_SHARED_ALIGNED() instead. DEFINE_PER_CPU_SHARED_ALIGNED() applies alignment only on SMPs. While all other converted places used _in_smp variant or only get compiled for SMP, net/rds used unconditional ____cacheline_aligned. I don't see any reason these data structures should be aligned on UP and thus converted together. Signed-off-by: Tejun Heo Cc: Mike Frysinger Cc: Tony Luck Cc: Andy Grover --- arch/blackfin/mm/sram-alloc.c | 6 +++--- arch/ia64/kernel/smp.c | 3 ++- 2 files changed, 5 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/mm/sram-alloc.c b/arch/blackfin/mm/sram-alloc.c index 0bc3c4ef0aad..99e4dbb1dfd1 100644 --- a/arch/blackfin/mm/sram-alloc.c +++ b/arch/blackfin/mm/sram-alloc.c @@ -42,9 +42,9 @@ #include #include "blackfin_sram.h" -static DEFINE_PER_CPU(spinlock_t, l1sram_lock) ____cacheline_aligned_in_smp; -static DEFINE_PER_CPU(spinlock_t, l1_data_sram_lock) ____cacheline_aligned_in_smp; -static DEFINE_PER_CPU(spinlock_t, l1_inst_sram_lock) ____cacheline_aligned_in_smp; +static DEFINE_PER_CPU_SHARED_ALIGNED(spinlock_t, l1sram_lock); +static DEFINE_PER_CPU_SHARED_ALIGNED(spinlock_t, l1_data_sram_lock); +static DEFINE_PER_CPU_SHARED_ALIGNED(spinlock_t, l1_inst_sram_lock); static spinlock_t l2_sram_lock ____cacheline_aligned_in_smp; /* the data structure for L1 scratchpad and DATA SRAM */ diff --git a/arch/ia64/kernel/smp.c b/arch/ia64/kernel/smp.c index 94cf78ba28fa..93ebfea43c6c 100644 --- a/arch/ia64/kernel/smp.c +++ b/arch/ia64/kernel/smp.c @@ -58,7 +58,8 @@ static struct local_tlb_flush_counts { unsigned int count; } __attribute__((__aligned__(32))) local_tlb_flush_counts[NR_CPUS]; -static DEFINE_PER_CPU(unsigned short [NR_CPUS], shadow_flush_counts) ____cacheline_aligned; +static DEFINE_PER_CPU_SHARED_ALIGNED(unsigned short [NR_CPUS], + shadow_flush_counts); #define IPI_CALL_FUNC 0 #define IPI_CPU_STOP 1 -- cgit v1.2.2 From 245b2e70eabd797932adb263a65da0bab3711753 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 24 Jun 2009 15:13:48 +0900 Subject: percpu: clean up percpu variable definitions Percpu variable definition is about to be updated such that all percpu symbols including the static ones must be unique. Update percpu variable definitions accordingly. * as,cfq: rename ioc_count uniquely * cpufreq: rename cpu_dbs_info uniquely * xen: move nesting_count out of xen_evtchn_do_upcall() and rename it * mm: move ratelimits out of balance_dirty_pages_ratelimited_nr() and rename it * ipv4,6: rename cookie_scratch uniquely * x86 perf_counter: rename prev_left to pmc_prev_left, irq_entry to pmc_irq_entry and nmi_entry to pmc_nmi_entry * perf_counter: rename disable_count to perf_disable_count * ftrace: rename test_event_disable to ftrace_test_event_disable * kmemleak: rename test_pointer to kmemleak_test_pointer * mce: rename next_interval to mce_next_interval [ Impact: percpu usage cleanups, no duplicate static percpu var names ] Signed-off-by: Tejun Heo Reviewed-by: Christoph Lameter Cc: Ivan Kokshaysky Cc: Jens Axboe Cc: Dave Jones Cc: Jeremy Fitzhardinge Cc: linux-mm Cc: David S. Miller Cc: Peter Zijlstra Cc: Steven Rostedt Cc: Li Zefan Cc: Catalin Marinas Cc: Andi Kleen --- arch/x86/kernel/cpu/mcheck/mce.c | 8 ++++---- arch/x86/kernel/cpu/perf_counter.c | 14 +++++++------- 2 files changed, 11 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index 284d1de968bc..cba8cd3e957b 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -1091,7 +1091,7 @@ void mce_log_therm_throt_event(__u64 status) */ static int check_interval = 5 * 60; /* 5 minutes */ -static DEFINE_PER_CPU(int, next_interval); /* in jiffies */ +static DEFINE_PER_CPU(int, mce_next_interval); /* in jiffies */ static DEFINE_PER_CPU(struct timer_list, mce_timer); static void mcheck_timer(unsigned long data) @@ -1110,7 +1110,7 @@ static void mcheck_timer(unsigned long data) * Alert userspace if needed. If we logged an MCE, reduce the * polling interval, otherwise increase the polling interval. */ - n = &__get_cpu_var(next_interval); + n = &__get_cpu_var(mce_next_interval); if (mce_notify_irq()) *n = max(*n/2, HZ/100); else @@ -1311,7 +1311,7 @@ static void mce_cpu_features(struct cpuinfo_x86 *c) static void mce_init_timer(void) { struct timer_list *t = &__get_cpu_var(mce_timer); - int *n = &__get_cpu_var(next_interval); + int *n = &__get_cpu_var(mce_next_interval); if (mce_ignore_ce) return; @@ -1914,7 +1914,7 @@ mce_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) case CPU_DOWN_FAILED: case CPU_DOWN_FAILED_FROZEN: t->expires = round_jiffies(jiffies + - __get_cpu_var(next_interval)); + __get_cpu_var(mce_next_interval)); add_timer_on(t, cpu); smp_call_function_single(cpu, mce_reenable_cpu, &action, 1); break; diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c index 4946288d6832..5fdf63aaaba1 100644 --- a/arch/x86/kernel/cpu/perf_counter.c +++ b/arch/x86/kernel/cpu/perf_counter.c @@ -862,7 +862,7 @@ amd_pmu_disable_counter(struct hw_perf_counter *hwc, int idx) x86_pmu_disable_counter(hwc, idx); } -static DEFINE_PER_CPU(u64 [X86_PMC_IDX_MAX], prev_left); +static DEFINE_PER_CPU(u64 [X86_PMC_IDX_MAX], pmc_prev_left); /* * Set the next IRQ period, based on the hwc->period_left value. @@ -901,7 +901,7 @@ x86_perf_counter_set_period(struct perf_counter *counter, if (left > x86_pmu.max_period) left = x86_pmu.max_period; - per_cpu(prev_left[idx], smp_processor_id()) = left; + per_cpu(pmc_prev_left[idx], smp_processor_id()) = left; /* * The hw counter starts counting from this counter offset, @@ -1089,7 +1089,7 @@ void perf_counter_print_debug(void) rdmsrl(x86_pmu.eventsel + idx, pmc_ctrl); rdmsrl(x86_pmu.perfctr + idx, pmc_count); - prev_left = per_cpu(prev_left[idx], cpu); + prev_left = per_cpu(pmc_prev_left[idx], cpu); pr_info("CPU#%d: gen-PMC%d ctrl: %016llx\n", cpu, idx, pmc_ctrl); @@ -1561,8 +1561,8 @@ void callchain_store(struct perf_callchain_entry *entry, u64 ip) entry->ip[entry->nr++] = ip; } -static DEFINE_PER_CPU(struct perf_callchain_entry, irq_entry); -static DEFINE_PER_CPU(struct perf_callchain_entry, nmi_entry); +static DEFINE_PER_CPU(struct perf_callchain_entry, pmc_irq_entry); +static DEFINE_PER_CPU(struct perf_callchain_entry, pmc_nmi_entry); static void @@ -1709,9 +1709,9 @@ struct perf_callchain_entry *perf_callchain(struct pt_regs *regs) struct perf_callchain_entry *entry; if (in_nmi()) - entry = &__get_cpu_var(nmi_entry); + entry = &__get_cpu_var(pmc_nmi_entry); else - entry = &__get_cpu_var(irq_entry); + entry = &__get_cpu_var(pmc_irq_entry); entry->nr = 0; -- cgit v1.2.2 From 6088464cf1ae9fb3d2ccc0ec5feb3f5b971098d8 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 24 Jun 2009 15:13:52 +0900 Subject: alpha: kill unnecessary __used attribute in PER_CPU_ATTRIBUTES With the previous percpu variable definition change, all percpu variables are global and there's no need to specify __used, which only triggers on recent compilers anyway. Kill it. [ Impact: remove unnecessary percpu attribute ] Signed-off-by: Tejun Heo Cc: Ivan Kokshaysky Cc: Richard Henderson --- arch/alpha/include/asm/percpu.h | 5 ----- 1 file changed, 5 deletions(-) (limited to 'arch') diff --git a/arch/alpha/include/asm/percpu.h b/arch/alpha/include/asm/percpu.h index 06c5c7a4afd3..7f0a9c4f2fd0 100644 --- a/arch/alpha/include/asm/percpu.h +++ b/arch/alpha/include/asm/percpu.h @@ -30,7 +30,6 @@ extern unsigned long __per_cpu_offset[NR_CPUS]; #ifndef MODULE #define SHIFT_PERCPU_PTR(var, offset) RELOC_HIDE(&per_cpu_var(var), (offset)) -#define PER_CPU_ATTRIBUTES #else /* * To calculate addresses of locally defined variables, GCC uses 32-bit @@ -49,8 +48,6 @@ extern unsigned long __per_cpu_offset[NR_CPUS]; : "=&r"(__ptr), "=&r"(tmp_gp)); \ (typeof(&per_cpu_var(var)))(__ptr + (offset)); }) -#define PER_CPU_ATTRIBUTES __used - #endif /* MODULE */ /* @@ -71,8 +68,6 @@ extern unsigned long __per_cpu_offset[NR_CPUS]; #define __get_cpu_var(var) per_cpu_var(var) #define __raw_get_cpu_var(var) per_cpu_var(var) -#define PER_CPU_ATTRIBUTES - #endif /* SMP */ #ifdef CONFIG_SMP -- cgit v1.2.2 From 9b7dbc7dc0365a943af2d73b1376a6f0aac5dc0d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 24 Jun 2009 15:13:52 +0900 Subject: alpha: switch to dynamic percpu allocator Alpha implements custom SHIFT_PERCPU_PTR for modules because percpu area can be located far away from the 4G area where the module text is located. The custom SHIFT_PERCPU_PTR forces GOT usage using ldq instruction with literal relocation; however, the relocation can't be used with dynamically allocated percpu variables. Fortunately, similar result can be achieved by using weak percpu variable definitions. This patch makes alpha use weak definitions and switch to dynamic percpu allocator. asm/tlbflush.h was getting linux/sched.h via asm/percpu.h which no longer needs it. Include linux/sched.h directly in asm/tlbflush.h. Compile tested. Generation of litereal relocation verified. This patch is based on Ivan Kokshaysky's alpha percpu patch. [ Impact: use dynamic percpu allocator ] Signed-off-by: Tejun Heo Acked-by: Ivan Kokshaysky Cc: Richard Henderson --- arch/alpha/Kconfig | 3 -- arch/alpha/include/asm/percpu.h | 95 ++++----------------------------------- arch/alpha/include/asm/tlbflush.h | 1 + 3 files changed, 9 insertions(+), 90 deletions(-) (limited to 'arch') diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 05d86407188c..9fb8aae5c391 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -70,9 +70,6 @@ config AUTO_IRQ_AFFINITY depends on SMP default y -config HAVE_LEGACY_PER_CPU_AREA - def_bool y - source "init/Kconfig" source "kernel/Kconfig.freezer" diff --git a/arch/alpha/include/asm/percpu.h b/arch/alpha/include/asm/percpu.h index 7f0a9c4f2fd0..2c12378e3aa9 100644 --- a/arch/alpha/include/asm/percpu.h +++ b/arch/alpha/include/asm/percpu.h @@ -1,97 +1,18 @@ #ifndef __ALPHA_PERCPU_H #define __ALPHA_PERCPU_H -#include -#include -#include - /* - * Determine the real variable name from the name visible in the - * kernel sources. - */ -#define per_cpu_var(var) per_cpu__##var - -#ifdef CONFIG_SMP - -/* - * per_cpu_offset() is the offset that has to be added to a - * percpu variable to get to the instance for a certain processor. - */ -extern unsigned long __per_cpu_offset[NR_CPUS]; - -#define per_cpu_offset(x) (__per_cpu_offset[x]) - -#define __my_cpu_offset per_cpu_offset(raw_smp_processor_id()) -#ifdef CONFIG_DEBUG_PREEMPT -#define my_cpu_offset per_cpu_offset(smp_processor_id()) -#else -#define my_cpu_offset __my_cpu_offset -#endif - -#ifndef MODULE -#define SHIFT_PERCPU_PTR(var, offset) RELOC_HIDE(&per_cpu_var(var), (offset)) -#else -/* - * To calculate addresses of locally defined variables, GCC uses 32-bit - * displacement from the GP. Which doesn't work for per cpu variables in - * modules, as an offset to the kernel per cpu area is way above 4G. + * To calculate addresses of locally defined variables, GCC uses + * 32-bit displacement from the GP. Which doesn't work for per cpu + * variables in modules, as an offset to the kernel per cpu area is + * way above 4G. * - * This forces allocation of a GOT entry for per cpu variable using - * ldq instruction with a 'literal' relocation. - */ -#define SHIFT_PERCPU_PTR(var, offset) ({ \ - extern int simple_identifier_##var(void); \ - unsigned long __ptr, tmp_gp; \ - asm ( "br %1, 1f \n\ - 1: ldgp %1, 0(%1) \n\ - ldq %0, per_cpu__" #var"(%1)\t!literal" \ - : "=&r"(__ptr), "=&r"(tmp_gp)); \ - (typeof(&per_cpu_var(var)))(__ptr + (offset)); }) - -#endif /* MODULE */ - -/* - * A percpu variable may point to a discarded regions. The following are - * established ways to produce a usable pointer from the percpu variable - * offset. + * Always use weak definitions for percpu variables in modules. */ -#define per_cpu(var, cpu) \ - (*SHIFT_PERCPU_PTR(var, per_cpu_offset(cpu))) -#define __get_cpu_var(var) \ - (*SHIFT_PERCPU_PTR(var, my_cpu_offset)) -#define __raw_get_cpu_var(var) \ - (*SHIFT_PERCPU_PTR(var, __my_cpu_offset)) - -#else /* ! SMP */ - -#define per_cpu(var, cpu) (*((void)(cpu), &per_cpu_var(var))) -#define __get_cpu_var(var) per_cpu_var(var) -#define __raw_get_cpu_var(var) per_cpu_var(var) - -#endif /* SMP */ - -#ifdef CONFIG_SMP -#define PER_CPU_BASE_SECTION ".data.percpu" -#else -#define PER_CPU_BASE_SECTION ".data" -#endif - -#ifdef CONFIG_SMP - -#ifdef MODULE -#define PER_CPU_SHARED_ALIGNED_SECTION "" -#else -#define PER_CPU_SHARED_ALIGNED_SECTION ".shared_aligned" -#endif -#define PER_CPU_FIRST_SECTION ".first" - -#else - -#define PER_CPU_SHARED_ALIGNED_SECTION "" -#define PER_CPU_FIRST_SECTION "" - +#if defined(MODULE) && defined(CONFIG_SMP) +#define ARCH_NEEDS_WEAK_PER_CPU #endif -#define PER_CPU_ATTRIBUTES +#include #endif /* __ALPHA_PERCPU_H */ diff --git a/arch/alpha/include/asm/tlbflush.h b/arch/alpha/include/asm/tlbflush.h index 9d87aaa08c0d..e89e0c2e15b1 100644 --- a/arch/alpha/include/asm/tlbflush.h +++ b/arch/alpha/include/asm/tlbflush.h @@ -2,6 +2,7 @@ #define _ALPHA_TLBFLUSH_H #include +#include #include #include -- cgit v1.2.2 From 9a0ef2923abd2cc2c6f78d3663ac7af34c0220e8 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 24 Jun 2009 15:13:53 +0900 Subject: s390: switch to dynamic percpu allocator 64bit s390 shares the same problem with alpha regarding percpu symbol addressing from modules. It needs assembly magic to force GOTENT reference when building module as the percpu address will be outside the usual 4G range from the module text. This can be solved by using weak percpu variable definitions. This patch makes s390 use weak definitions and switch to dynamic percpu allocator. Please note that weak attribute is not added if !SMP as percpu variables behave exactly the same as normal variables on UP. Compile tested. Generation of GOTENT reference verified. This patch is based on Ivan Kokshaysky's alpha percpu patch. [ Impact: use dynamic percpu allocator ] Signed-off-by: Tejun Heo Cc: Martin Schwidefsky Cc: Heiko Carstens --- arch/s390/Kconfig | 3 --- arch/s390/include/asm/percpu.h | 32 ++++++++------------------------ 2 files changed, 8 insertions(+), 27 deletions(-) (limited to 'arch') diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index f4a3cc62d28f..a14dba0e4d67 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -75,9 +75,6 @@ config VIRT_CPU_ACCOUNTING config ARCH_SUPPORTS_DEBUG_PAGEALLOC def_bool y -config HAVE_LEGACY_PER_CPU_AREA - def_bool y - mainmenu "Linux Kernel Configuration" config S390 diff --git a/arch/s390/include/asm/percpu.h b/arch/s390/include/asm/percpu.h index 408d60b4f75b..f7ad8719d02d 100644 --- a/arch/s390/include/asm/percpu.h +++ b/arch/s390/include/asm/percpu.h @@ -1,37 +1,21 @@ #ifndef __ARCH_S390_PERCPU__ #define __ARCH_S390_PERCPU__ -#include -#include - /* * s390 uses its own implementation for per cpu data, the offset of * the cpu local data area is cached in the cpu's lowcore memory. - * For 64 bit module code s390 forces the use of a GOT slot for the - * address of the per cpu variable. This is needed because the module - * may be more than 4G above the per cpu area. */ -#if defined(__s390x__) && defined(MODULE) - -#define SHIFT_PERCPU_PTR(ptr,offset) (({ \ - extern int simple_identifier_##var(void); \ - unsigned long *__ptr; \ - asm ( "larl %0, %1@GOTENT" \ - : "=a" (__ptr) : "X" (ptr) ); \ - (typeof(ptr))((*__ptr) + (offset)); })) - -#else - -#define SHIFT_PERCPU_PTR(ptr, offset) (({ \ - extern int simple_identifier_##var(void); \ - unsigned long __ptr; \ - asm ( "" : "=a" (__ptr) : "0" (ptr) ); \ - (typeof(ptr)) (__ptr + (offset)); })) +#define __my_cpu_offset S390_lowcore.percpu_offset +/* + * For 64 bit module code, the module may be more than 4G above the + * per cpu area, use weak definitions to force the compiler to + * generate external references. + */ +#if defined(CONFIG_SMP) && defined(__s390x__) && defined(MODULE) +#define ARCH_NEEDS_WEAK_PER_CPU #endif -#define __my_cpu_offset S390_lowcore.percpu_offset - #include #endif /* __ARCH_S390_PERCPU__ */ -- cgit v1.2.2 From bf4bb2b1f285ec56e7f3cbf0190761b42131871c Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 24 Jun 2009 16:57:03 +0900 Subject: sparc64: fix build breakage introduced by percpu-convert-most patchset Commit e74e396204bfcb67570ba4517b08f5918e69afea incorrectly added HAVE_LEGACY_PER_CPU_AREA to sparc64 although it already has been converted to dynamic percpu allocator. Drop both HAVE_{LEGACY|DYNAMIC}_PER_CPU_AREA. Signed-off-by: Tejun Heo Acked-by: David Miller --- arch/sparc/Kconfig | 6 ------ 1 file changed, 6 deletions(-) (limited to 'arch') diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 7a8698b913fe..4f6ed0f113f0 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -92,15 +92,9 @@ config AUDIT_ARCH bool default y -config HAVE_LEGACY_PER_CPU_AREA - def_bool y if SPARC64 - config HAVE_SETUP_PER_CPU_AREA def_bool y if SPARC64 -config HAVE_DYNAMIC_PER_CPU_AREA - def_bool y if SPARC64 - config GENERIC_HARDIRQS_NO__DO_IRQ bool def_bool y if SPARC64 -- cgit v1.2.2 From 788e5abc5441e9046dd91c995c6f1f75bbd144bf Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 4 Jul 2009 08:10:58 +0900 Subject: percpu: drop @unit_size from embed first chunk allocator The only extra feature @unit_size provides is making dead space at the end of the first chunk which doesn't have any valid usecase. Drop the parameter. This will increase consistency with generalized 4k allocator. James Bottomley spotted missing conversion for the default setup_per_cpu_areas() which caused build breakage on all arcsh which use it. [ Impact: drop unused code path ] Signed-off-by: Tejun Heo Cc: James Bottomley Cc: Ingo Molnar --- arch/x86/kernel/setup_percpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c index 29a3eef7cf4a..14728206fb52 100644 --- a/arch/x86/kernel/setup_percpu.c +++ b/arch/x86/kernel/setup_percpu.c @@ -342,7 +342,7 @@ static ssize_t __init setup_pcpu_embed(size_t static_size, bool chosen) return -EINVAL; return pcpu_embed_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE, - reserve - PERCPU_FIRST_CHUNK_RESERVE, -1); + reserve - PERCPU_FIRST_CHUNK_RESERVE); } /* -- cgit v1.2.2 From d4b95f80399471e4bce5e992700ff7f06ef91f6a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 4 Jul 2009 08:10:59 +0900 Subject: x86,percpu: generalize 4k first chunk allocator Generalize and move x86 setup_pcpu_4k() into pcpu_4k_first_chunk(). setup_pcpu_4k() now is a simple wrapper around the generalized version. Other than taking size parameters and using arch supplied callbacks to allocate/free memory, pcpu_4k_first_chunk() is identical to the original implementation. This simplifies arch code and will help converting more archs to dynamic percpu allocator. While at it, s/pcpu_populate_pte_fn_t/pcpu_fc_populate_pte_fn_t/ for consistency. [ Impact: code reorganization and generalization ] Signed-off-by: Tejun Heo Cc: Ingo Molnar --- arch/x86/kernel/setup_percpu.c | 78 ++++++++++-------------------------------- 1 file changed, 19 insertions(+), 59 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c index 14728206fb52..ab896b31e80b 100644 --- a/arch/x86/kernel/setup_percpu.c +++ b/arch/x86/kernel/setup_percpu.c @@ -123,6 +123,19 @@ static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size, #endif } +/* + * Helpers for first chunk memory allocation + */ +static void * __init pcpu_fc_alloc(unsigned int cpu, size_t size) +{ + return pcpu_alloc_bootmem(cpu, size, size); +} + +static void __init pcpu_fc_free(void *ptr, size_t size) +{ + free_bootmem(__pa(ptr), size); +} + /* * Large page remap allocator * @@ -346,22 +359,11 @@ static ssize_t __init setup_pcpu_embed(size_t static_size, bool chosen) } /* - * 4k page allocator + * 4k allocator * - * This is the basic allocator. Static percpu area is allocated - * page-by-page and most of initialization is done by the generic - * setup function. + * Boring fallback 4k allocator. This allocator puts more pressure on + * PTE TLBs but other than that behaves nicely on both UMA and NUMA. */ -static struct page **pcpu4k_pages __initdata; -static int pcpu4k_nr_static_pages __initdata; - -static struct page * __init pcpu4k_get_page(unsigned int cpu, int pageno) -{ - if (pageno < pcpu4k_nr_static_pages) - return pcpu4k_pages[cpu * pcpu4k_nr_static_pages + pageno]; - return NULL; -} - static void __init pcpu4k_populate_pte(unsigned long addr) { populate_extra_pte(addr); @@ -369,51 +371,9 @@ static void __init pcpu4k_populate_pte(unsigned long addr) static ssize_t __init setup_pcpu_4k(size_t static_size) { - size_t pages_size; - unsigned int cpu; - int i, j; - ssize_t ret; - - pcpu4k_nr_static_pages = PFN_UP(static_size); - - /* unaligned allocations can't be freed, round up to page size */ - pages_size = PFN_ALIGN(pcpu4k_nr_static_pages * num_possible_cpus() - * sizeof(pcpu4k_pages[0])); - pcpu4k_pages = alloc_bootmem(pages_size); - - /* allocate and copy */ - j = 0; - for_each_possible_cpu(cpu) - for (i = 0; i < pcpu4k_nr_static_pages; i++) { - void *ptr; - - ptr = pcpu_alloc_bootmem(cpu, PAGE_SIZE, PAGE_SIZE); - if (!ptr) { - pr_warning("PERCPU: failed to allocate " - "4k page for cpu%u\n", cpu); - goto enomem; - } - - memcpy(ptr, __per_cpu_load + i * PAGE_SIZE, PAGE_SIZE); - pcpu4k_pages[j++] = virt_to_page(ptr); - } - - /* we're ready, commit */ - pr_info("PERCPU: Allocated %d 4k pages, static data %zu bytes\n", - pcpu4k_nr_static_pages, static_size); - - ret = pcpu_setup_first_chunk(pcpu4k_get_page, static_size, - PERCPU_FIRST_CHUNK_RESERVE, -1, - -1, NULL, pcpu4k_populate_pte); - goto out_free_ar; - -enomem: - while (--j >= 0) - free_bootmem(__pa(page_address(pcpu4k_pages[j])), PAGE_SIZE); - ret = -ENOMEM; -out_free_ar: - free_bootmem(__pa(pcpu4k_pages), pages_size); - return ret; + return pcpu_4k_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE, + pcpu_fc_alloc, pcpu_fc_free, + pcpu4k_populate_pte); } /* for explicit first chunk allocator selection */ -- cgit v1.2.2 From 8c4bfc6e8801616ab2e01c38140b2159b388d2ff Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 4 Jul 2009 08:10:59 +0900 Subject: x86,percpu: generalize lpage first chunk allocator Generalize and move x86 setup_pcpu_lpage() into pcpu_lpage_first_chunk(). setup_pcpu_lpage() now is a simple wrapper around the generalized version. Other than taking size parameters and using arch supplied callbacks to allocate/free/map memory, pcpu_lpage_first_chunk() is identical to the original implementation. This simplifies arch code and will help converting more archs to dynamic percpu allocator. While at it, factor out pcpu_calc_fc_sizes() which is common to pcpu_embed_first_chunk() and pcpu_lpage_first_chunk(). [ Impact: code reorganization and generalization ] Signed-off-by: Tejun Heo Cc: Ingo Molnar --- arch/x86/include/asm/percpu.h | 9 --- arch/x86/kernel/setup_percpu.c | 169 +++-------------------------------------- arch/x86/mm/pageattr.c | 1 + 3 files changed, 12 insertions(+), 167 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h index 103f1ddb0d85..a18c038a3079 100644 --- a/arch/x86/include/asm/percpu.h +++ b/arch/x86/include/asm/percpu.h @@ -156,15 +156,6 @@ do { \ /* We can use this directly for local CPU (faster). */ DECLARE_PER_CPU(unsigned long, this_cpu_off); -#ifdef CONFIG_NEED_MULTIPLE_NODES -void *pcpu_lpage_remapped(void *kaddr); -#else -static inline void *pcpu_lpage_remapped(void *kaddr) -{ - return NULL; -} -#endif - #endif /* !__ASSEMBLY__ */ #ifdef CONFIG_SMP diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c index ab896b31e80b..4f2e0ac9130b 100644 --- a/arch/x86/kernel/setup_percpu.c +++ b/arch/x86/kernel/setup_percpu.c @@ -137,44 +137,21 @@ static void __init pcpu_fc_free(void *ptr, size_t size) } /* - * Large page remap allocator - * - * This allocator uses PMD page as unit. A PMD page is allocated for - * each cpu and each is remapped into vmalloc area using PMD mapping. - * As PMD page is quite large, only part of it is used for the first - * chunk. Unused part is returned to the bootmem allocator. - * - * So, the PMD pages are mapped twice - once to the physical mapping - * and to the vmalloc area for the first percpu chunk. The double - * mapping does add one more PMD TLB entry pressure but still is much - * better than only using 4k mappings while still being NUMA friendly. + * Large page remapping allocator */ #ifdef CONFIG_NEED_MULTIPLE_NODES -struct pcpul_ent { - unsigned int cpu; - void *ptr; -}; - -static size_t pcpul_size; -static struct pcpul_ent *pcpul_map; -static struct vm_struct pcpul_vm; - -static struct page * __init pcpul_get_page(unsigned int cpu, int pageno) +static void __init pcpul_map(void *ptr, size_t size, void *addr) { - size_t off = (size_t)pageno << PAGE_SHIFT; + pmd_t *pmd, pmd_v; - if (off >= pcpul_size) - return NULL; - - return virt_to_page(pcpul_map[cpu].ptr + off); + pmd = populate_extra_pmd((unsigned long)addr); + pmd_v = pfn_pmd(page_to_pfn(virt_to_page(ptr)), PAGE_KERNEL_LARGE); + set_pmd(pmd, pmd_v); } static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen) { - size_t map_size, dyn_size; - unsigned int cpu; - int i, j; - ssize_t ret; + size_t reserve = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE; if (!chosen) { size_t vm_size = VMALLOC_END - VMALLOC_START; @@ -198,134 +175,10 @@ static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen) return -EINVAL; } - /* - * Currently supports only single page. Supporting multiple - * pages won't be too difficult if it ever becomes necessary. - */ - pcpul_size = PFN_ALIGN(static_size + PERCPU_MODULE_RESERVE + - PERCPU_DYNAMIC_RESERVE); - if (pcpul_size > PMD_SIZE) { - pr_warning("PERCPU: static data is larger than large page, " - "can't use large page\n"); - return -EINVAL; - } - dyn_size = pcpul_size - static_size - PERCPU_FIRST_CHUNK_RESERVE; - - /* allocate pointer array and alloc large pages */ - map_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpul_map[0])); - pcpul_map = alloc_bootmem(map_size); - - for_each_possible_cpu(cpu) { - pcpul_map[cpu].cpu = cpu; - pcpul_map[cpu].ptr = pcpu_alloc_bootmem(cpu, PMD_SIZE, - PMD_SIZE); - if (!pcpul_map[cpu].ptr) { - pr_warning("PERCPU: failed to allocate large page " - "for cpu%u\n", cpu); - goto enomem; - } - - /* - * Only use pcpul_size bytes and give back the rest. - * - * Ingo: The 2MB up-rounding bootmem is needed to make - * sure the partial 2MB page is still fully RAM - it's - * not well-specified to have a PAT-incompatible area - * (unmapped RAM, device memory, etc.) in that hole. - */ - free_bootmem(__pa(pcpul_map[cpu].ptr + pcpul_size), - PMD_SIZE - pcpul_size); - - memcpy(pcpul_map[cpu].ptr, __per_cpu_load, static_size); - } - - /* allocate address and map */ - pcpul_vm.flags = VM_ALLOC; - pcpul_vm.size = num_possible_cpus() * PMD_SIZE; - vm_area_register_early(&pcpul_vm, PMD_SIZE); - - for_each_possible_cpu(cpu) { - pmd_t *pmd, pmd_v; - - pmd = populate_extra_pmd((unsigned long)pcpul_vm.addr + - cpu * PMD_SIZE); - pmd_v = pfn_pmd(page_to_pfn(virt_to_page(pcpul_map[cpu].ptr)), - PAGE_KERNEL_LARGE); - set_pmd(pmd, pmd_v); - } - - /* we're ready, commit */ - pr_info("PERCPU: Remapped at %p with large pages, static data " - "%zu bytes\n", pcpul_vm.addr, static_size); - - ret = pcpu_setup_first_chunk(pcpul_get_page, static_size, - PERCPU_FIRST_CHUNK_RESERVE, dyn_size, - PMD_SIZE, pcpul_vm.addr, NULL); - - /* sort pcpul_map array for pcpu_lpage_remapped() */ - for (i = 0; i < num_possible_cpus() - 1; i++) - for (j = i + 1; j < num_possible_cpus(); j++) - if (pcpul_map[i].ptr > pcpul_map[j].ptr) { - struct pcpul_ent tmp = pcpul_map[i]; - pcpul_map[i] = pcpul_map[j]; - pcpul_map[j] = tmp; - } - - return ret; - -enomem: - for_each_possible_cpu(cpu) - if (pcpul_map[cpu].ptr) - free_bootmem(__pa(pcpul_map[cpu].ptr), pcpul_size); - free_bootmem(__pa(pcpul_map), map_size); - return -ENOMEM; -} - -/** - * pcpu_lpage_remapped - determine whether a kaddr is in pcpul recycled area - * @kaddr: the kernel address in question - * - * Determine whether @kaddr falls in the pcpul recycled area. This is - * used by pageattr to detect VM aliases and break up the pcpu PMD - * mapping such that the same physical page is not mapped under - * different attributes. - * - * The recycled area is always at the tail of a partially used PMD - * page. - * - * RETURNS: - * Address of corresponding remapped pcpu address if match is found; - * otherwise, NULL. - */ -void *pcpu_lpage_remapped(void *kaddr) -{ - void *pmd_addr = (void *)((unsigned long)kaddr & PMD_MASK); - unsigned long offset = (unsigned long)kaddr & ~PMD_MASK; - int left = 0, right = num_possible_cpus() - 1; - int pos; - - /* pcpul in use at all? */ - if (!pcpul_map) - return NULL; - - /* okay, perform binary search */ - while (left <= right) { - pos = (left + right) / 2; - - if (pcpul_map[pos].ptr < pmd_addr) - left = pos + 1; - else if (pcpul_map[pos].ptr > pmd_addr) - right = pos - 1; - else { - /* it shouldn't be in the area for the first chunk */ - WARN_ON(offset < pcpul_size); - - return pcpul_vm.addr + - pcpul_map[pos].cpu * PMD_SIZE + offset; - } - } - - return NULL; + return pcpu_lpage_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE, + reserve - PERCPU_FIRST_CHUNK_RESERVE, + PMD_SIZE, + pcpu_fc_alloc, pcpu_fc_free, pcpul_map); } #else static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen) diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index 1b734d7a8966..c106f7852424 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include -- cgit v1.2.2 From 38a6be525460f52ac6f2de1c3f73c5615a8853cd Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 4 Jul 2009 08:10:59 +0900 Subject: percpu: simplify pcpu_setup_first_chunk() Now that all first chunk allocator helpers allocate and map the first chunk themselves, there's no need to have optional default alloc/map in pcpu_setup_first_chunk(). Drop @populate_pte_fn and only leave @dyn_size optional and make all other params mandatory. This makes it much easier to follow what pcpu_setup_first_chunk() is doing and what actual differences tweaking each parameter results in. [ Impact: drop unused code path ] Signed-off-by: Tejun Heo Cc: Ingo Molnar --- arch/sparc/kernel/smp_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c index fa44eaf8d897..ccad7b20ae75 100644 --- a/arch/sparc/kernel/smp_64.c +++ b/arch/sparc/kernel/smp_64.c @@ -1528,7 +1528,7 @@ void __init setup_per_cpu_areas(void) pcpu_unit_size = pcpu_setup_first_chunk(pcpur_get_page, static_size, PERCPU_MODULE_RESERVE, dyn_size, - PCPU_CHUNK_SIZE, vm.addr, NULL); + PCPU_CHUNK_SIZE, vm.addr); free_bootmem(__pa(pcpur_ptrs), ptrs_size); -- cgit v1.2.2 From ce3141a277ff6cc37e51008b8888dc2cb7456ef1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 4 Jul 2009 08:11:00 +0900 Subject: percpu: drop pcpu_chunk->page[] percpu core doesn't need to tack all the allocated pages. It needs to know whether certain pages are populated and a way to reverse map address to page when freeing. This patch drops pcpu_chunk->page[] and use populated bitmap and vmalloc_to_page() lookup instead. Using vmalloc_to_page() exclusively is also possible but complicates first chunk handling, inflates cache footprint and prevents non-standard memory allocation for percpu memory. pcpu_chunk->page[] was used to track each page's allocation and allowed asymmetric population which happens during failure path; however, with single bitmap for all units, this is no longer possible. Bite the bullet and rewrite (de)populate functions so that things are done in clearly separated steps such that asymmetric population doesn't happen. This makes the (de)population process much more modular and will also ease implementing non-standard memory usage in the future (e.g. large pages). This makes @get_page_fn parameter to pcpu_setup_first_chunk() unnecessary. The parameter is dropped and all first chunk helpers are updated accordingly. Please note that despite the volume most changes to first chunk helpers are symbol renames for variables which don't need to be referenced outside of the helper anymore. This change reduces memory usage and cache footprint of pcpu_chunk. Now only #unit_pages bits are necessary per chunk. [ Impact: reduced memory usage and cache footprint for bookkeeping ] Signed-off-by: Tejun Heo Cc: Ingo Molnar Cc: David Miller --- arch/sparc/kernel/smp_64.c | 42 +++++++++++++++--------------------------- 1 file changed, 15 insertions(+), 27 deletions(-) (limited to 'arch') diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c index ccad7b20ae75..f2f22ee97a7a 100644 --- a/arch/sparc/kernel/smp_64.c +++ b/arch/sparc/kernel/smp_64.c @@ -1415,19 +1415,6 @@ static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size, #endif } -static size_t pcpur_size __initdata; -static void **pcpur_ptrs __initdata; - -static struct page * __init pcpur_get_page(unsigned int cpu, int pageno) -{ - size_t off = (size_t)pageno << PAGE_SHIFT; - - if (off >= pcpur_size) - return NULL; - - return virt_to_page(pcpur_ptrs[cpu] + off); -} - #define PCPU_CHUNK_SIZE (4UL * 1024UL * 1024UL) static void __init pcpu_map_range(unsigned long start, unsigned long end, @@ -1491,25 +1478,26 @@ void __init setup_per_cpu_areas(void) size_t dyn_size, static_size = __per_cpu_end - __per_cpu_start; static struct vm_struct vm; unsigned long delta, cpu; - size_t pcpu_unit_size; + size_t size_sum, pcpu_unit_size; size_t ptrs_size; + void **ptrs; - pcpur_size = PFN_ALIGN(static_size + PERCPU_MODULE_RESERVE + - PERCPU_DYNAMIC_RESERVE); - dyn_size = pcpur_size - static_size - PERCPU_MODULE_RESERVE; + size_sum = PFN_ALIGN(static_size + PERCPU_MODULE_RESERVE + + PERCPU_DYNAMIC_RESERVE); + dyn_size = size_sum - static_size - PERCPU_MODULE_RESERVE; - ptrs_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpur_ptrs[0])); - pcpur_ptrs = alloc_bootmem(ptrs_size); + ptrs_size = PFN_ALIGN(num_possible_cpus() * sizeof(ptrs[0])); + ptrs = alloc_bootmem(ptrs_size); for_each_possible_cpu(cpu) { - pcpur_ptrs[cpu] = pcpu_alloc_bootmem(cpu, PCPU_CHUNK_SIZE, - PCPU_CHUNK_SIZE); + ptrs[cpu] = pcpu_alloc_bootmem(cpu, PCPU_CHUNK_SIZE, + PCPU_CHUNK_SIZE); - free_bootmem(__pa(pcpur_ptrs[cpu] + pcpur_size), - PCPU_CHUNK_SIZE - pcpur_size); + free_bootmem(__pa(ptrs[cpu] + size_sum), + PCPU_CHUNK_SIZE - size_sum); - memcpy(pcpur_ptrs[cpu], __per_cpu_load, static_size); + memcpy(ptrs[cpu], __per_cpu_load, static_size); } /* allocate address and map */ @@ -1523,14 +1511,14 @@ void __init setup_per_cpu_areas(void) start += cpu * PCPU_CHUNK_SIZE; end = start + PCPU_CHUNK_SIZE; - pcpu_map_range(start, end, virt_to_page(pcpur_ptrs[cpu])); + pcpu_map_range(start, end, virt_to_page(ptrs[cpu])); } - pcpu_unit_size = pcpu_setup_first_chunk(pcpur_get_page, static_size, + pcpu_unit_size = pcpu_setup_first_chunk(static_size, PERCPU_MODULE_RESERVE, dyn_size, PCPU_CHUNK_SIZE, vm.addr); - free_bootmem(__pa(pcpur_ptrs), ptrs_size); + free_bootmem(__pa(ptrs), ptrs_size); delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start; for_each_possible_cpu(cpu) { -- cgit v1.2.2 From 2f39e637ea240efb74cf807d31c93a71a0b89174 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 4 Jul 2009 08:11:00 +0900 Subject: percpu: allow non-linear / sparse cpu -> unit mapping Currently cpu and unit are always identity mapped. To allow more efficient large page support on NUMA and lazy allocation for possible but offline cpus, cpu -> unit mapping needs to be non-linear and/or sparse. This can be easily implemented by adding a cpu -> unit mapping array and using it whenever looking up the matching unit for a cpu. The only unusal conversion is in pcpu_chunk_addr_search(). The passed in address is unit0 based and unit0 might not be in use so it needs to be converted to address of an in-use unit. This is easily done by adding the unit offset for the current processor. [ Impact: allows non-linear/sparse cpu -> unit mapping, no visible change yet ] Signed-off-by: Tejun Heo Cc: Ingo Molnar Cc: David Miller --- arch/sparc/kernel/smp_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c index f2f22ee97a7a..6970333b48b8 100644 --- a/arch/sparc/kernel/smp_64.c +++ b/arch/sparc/kernel/smp_64.c @@ -1516,7 +1516,7 @@ void __init setup_per_cpu_areas(void) pcpu_unit_size = pcpu_setup_first_chunk(static_size, PERCPU_MODULE_RESERVE, dyn_size, - PCPU_CHUNK_SIZE, vm.addr); + PCPU_CHUNK_SIZE, vm.addr, NULL); free_bootmem(__pa(ptrs), ptrs_size); -- cgit v1.2.2 From a530b7958612bafe2027e21359083dba84f0b3b4 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 4 Jul 2009 08:11:00 +0900 Subject: percpu: teach large page allocator about NUMA Large page first chunk allocator is primarily used for NUMA machines; however, its NUMA handling is extremely simplistic. Regardless of their proximity, each cpu is put into separate large page just to return most of the allocated space back wasting large amount of vmalloc space and increasing cache footprint. This patch teachs NUMA details to large page allocator. Given processor proximity information, pcpu_lpage_build_unit_map() will find fitting cpu -> unit mapping in which cpus in LOCAL_DISTANCE share the same large page and not too much virtual address space is wasted. This greatly reduces the unit and thus chunk size and wastes much less address space for the first chunk. For example, on 4/4 NUMA machine, the original code occupied 16MB of virtual space for the first chunk while the new code only uses 4MB - one 2MB page for each node. [ Impact: much better space efficiency on NUMA machines ] Signed-off-by: Tejun Heo Cc: Ingo Molnar Cc: Jan Beulich Cc: Andi Kleen Cc: David Miller --- arch/x86/kernel/setup_percpu.c | 72 ++++++++++++++++++++++++++++++++---------- 1 file changed, 55 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c index 4f2e0ac9130b..7501bb14bd51 100644 --- a/arch/x86/kernel/setup_percpu.c +++ b/arch/x86/kernel/setup_percpu.c @@ -149,36 +149,73 @@ static void __init pcpul_map(void *ptr, size_t size, void *addr) set_pmd(pmd, pmd_v); } +static int pcpu_lpage_cpu_distance(unsigned int from, unsigned int to) +{ + if (early_cpu_to_node(from) == early_cpu_to_node(to)) + return LOCAL_DISTANCE; + else + return REMOTE_DISTANCE; +} + static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen) { size_t reserve = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE; + size_t dyn_size = reserve - PERCPU_FIRST_CHUNK_RESERVE; + size_t unit_map_size, unit_size; + int *unit_map; + int nr_units; + ssize_t ret; + + /* on non-NUMA, embedding is better */ + if (!chosen && !pcpu_need_numa()) + return -EINVAL; + + /* need PSE */ + if (!cpu_has_pse) { + pr_warning("PERCPU: lpage allocator requires PSE\n"); + return -EINVAL; + } + /* allocate and build unit_map */ + unit_map_size = num_possible_cpus() * sizeof(int); + unit_map = alloc_bootmem_nopanic(unit_map_size); + if (!unit_map) { + pr_warning("PERCPU: failed to allocate unit_map\n"); + return -ENOMEM; + } + + ret = pcpu_lpage_build_unit_map(static_size, + PERCPU_FIRST_CHUNK_RESERVE, + &dyn_size, &unit_size, PMD_SIZE, + unit_map, pcpu_lpage_cpu_distance); + if (ret < 0) { + pr_warning("PERCPU: failed to build unit_map\n"); + goto out_free; + } + nr_units = ret; + + /* do the parameters look okay? */ if (!chosen) { size_t vm_size = VMALLOC_END - VMALLOC_START; - size_t tot_size = num_possible_cpus() * PMD_SIZE; - - /* on non-NUMA, embedding is better */ - if (!pcpu_need_numa()) - return -EINVAL; + size_t tot_size = nr_units * unit_size; /* don't consume more than 20% of vmalloc area */ if (tot_size > vm_size / 5) { pr_info("PERCPU: too large chunk size %zuMB for " "large page remap\n", tot_size >> 20); - return -EINVAL; + ret = -EINVAL; + goto out_free; } } - /* need PSE */ - if (!cpu_has_pse) { - pr_warning("PERCPU: lpage allocator requires PSE\n"); - return -EINVAL; - } - - return pcpu_lpage_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE, - reserve - PERCPU_FIRST_CHUNK_RESERVE, - PMD_SIZE, - pcpu_fc_alloc, pcpu_fc_free, pcpul_map); + ret = pcpu_lpage_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE, + dyn_size, unit_size, PMD_SIZE, + unit_map, nr_units, + pcpu_fc_alloc, pcpu_fc_free, pcpul_map); +out_free: + if (ret < 0) + free_bootmem(__pa(unit_map), unit_map_size); + return ret; } #else static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen) @@ -299,7 +336,8 @@ void __init setup_per_cpu_areas(void) /* alrighty, percpu areas up and running */ delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start; for_each_possible_cpu(cpu) { - per_cpu_offset(cpu) = delta + cpu * pcpu_unit_size; + per_cpu_offset(cpu) = + delta + pcpu_unit_map[cpu] * pcpu_unit_size; per_cpu(this_cpu_off, cpu) = per_cpu_offset(cpu); per_cpu(cpu_number, cpu) = cpu; setup_percpu_segment(cpu); -- cgit v1.2.2 From 1dcdd0911b5553f0282ce8525773955b59a56919 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 9 Jul 2009 11:27:40 +0900 Subject: microblaze: include EXIT_TEXT to _stext Microblaze wants to throw out EXIT_TEXT during runtime too. This hasn't caused trouble till now because the linker script didn't discard EXIT_TEXT and it ended up in its default output section. As discard definition is about to be unified, include EXIT_TEXT into _stext explicitly and while at it replace explicit exitcall definition to EXIT_CALL. Signed-off-by: Michal Simek Signed-off-by: Tejun Heo --- arch/microblaze/kernel/vmlinux.lds.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S index a207543c5927..81bebdcb18fe 100644 --- a/arch/microblaze/kernel/vmlinux.lds.S +++ b/arch/microblaze/kernel/vmlinux.lds.S @@ -23,8 +23,8 @@ SECTIONS { _stext = . ; *(.text .text.*) *(.fixup) - - *(.exitcall.exit) + EXIT_TEXT + EXIT_CALL SCHED_TEXT LOCK_TEXT KPROBES_TEXT -- cgit v1.2.2 From 023bf6f1b8bf58dc4da7f0dc1cf4787b0d5297c1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 9 Jul 2009 11:27:40 +0900 Subject: linker script: unify usage of discard definition Discarded sections in different archs share some commonality but have considerable differences. This led to linker script for each arch implementing its own /DISCARD/ definition, which makes maintaining tedious and adding new entries error-prone. This patch makes all linker scripts to move discard definitions to the end of the linker script and use the common DISCARDS macro. As ld uses the first matching section definition, archs can include default discarded sections by including them earlier in the linker script. ia64 is notable because it first throws away some ia64 specific subsections and then include the rest of the sections into the final image, so those sections must be discarded before the inclusion. defconfig compile tested for x86, x86-64, powerpc, powerpc64, ia64, alpha, sparc, sparc64 and s390. Michal Simek tested microblaze. Signed-off-by: Tejun Heo Acked-by: Paul Mundt Acked-by: Mike Frysinger Tested-by: Michal Simek Cc: linux-arch@vger.kernel.org Cc: Michal Simek Cc: microblaze-uclinux@itee.uq.edu.au Cc: Sam Ravnborg Cc: Tony Luck --- arch/alpha/kernel/vmlinux.lds.S | 10 ++-------- arch/avr32/kernel/vmlinux.lds.S | 10 +++------- arch/blackfin/kernel/vmlinux.lds.S | 6 +----- arch/cris/kernel/vmlinux.lds.S | 10 ++-------- arch/frv/kernel/vmlinux.lds.S | 2 +- arch/h8300/kernel/vmlinux.lds.S | 6 ++---- arch/ia64/kernel/vmlinux.lds.S | 17 ++++++++--------- arch/m32r/kernel/vmlinux.lds.S | 11 +++-------- arch/m68k/kernel/vmlinux-std.lds | 11 +++-------- arch/m68k/kernel/vmlinux-sun3.lds | 10 ++-------- arch/m68knommu/kernel/vmlinux.lds.S | 8 +------- arch/microblaze/kernel/vmlinux.lds.S | 2 +- arch/mips/kernel/vmlinux.lds.S | 22 ++++++++++------------ arch/mn10300/kernel/vmlinux.lds.S | 9 +++------ arch/parisc/kernel/vmlinux.lds.S | 9 ++++----- arch/powerpc/kernel/vmlinux.lds.S | 10 +++------- arch/s390/kernel/vmlinux.lds.S | 10 +++------- arch/sh/kernel/vmlinux.lds.S | 11 ++++------- arch/sparc/kernel/vmlinux.lds.S | 9 ++------- arch/um/include/asm/common.lds.S | 5 ----- arch/um/kernel/dyn.lds.S | 2 +- arch/um/kernel/uml.lds.S | 2 +- arch/x86/kernel/vmlinux.lds.S | 11 ++++------- arch/xtensa/kernel/vmlinux.lds.S | 14 ++++---------- 24 files changed, 68 insertions(+), 149 deletions(-) (limited to 'arch') diff --git a/arch/alpha/kernel/vmlinux.lds.S b/arch/alpha/kernel/vmlinux.lds.S index 75fe1d6877e9..6dc03c35caa0 100644 --- a/arch/alpha/kernel/vmlinux.lds.S +++ b/arch/alpha/kernel/vmlinux.lds.S @@ -134,14 +134,6 @@ SECTIONS __bss_stop = .; _end = .; - /* Sections to be discarded */ - /DISCARD/ : { - EXIT_TEXT - EXIT_DATA - *(.exitcall.exit) - *(.discard) - } - .mdebug 0 : { *(.mdebug) } @@ -151,4 +143,6 @@ SECTIONS STABS_DEBUG DWARF_DEBUG + + DISCARDS } diff --git a/arch/avr32/kernel/vmlinux.lds.S b/arch/avr32/kernel/vmlinux.lds.S index b8324608ec0c..c4b56654349a 100644 --- a/arch/avr32/kernel/vmlinux.lds.S +++ b/arch/avr32/kernel/vmlinux.lds.S @@ -124,15 +124,11 @@ SECTIONS _end = .; } + DWARF_DEBUG + /* When something in the kernel is NOT compiled as a module, the module * cleanup code and data are put into these segments. Both can then be * thrown away, as cleanup code is never called unless it's a module. */ - /DISCARD/ : { - EXIT_DATA - *(.exitcall.exit) - *(.discard) - } - - DWARF_DEBUG + DISCARDS } diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S index 6e8eabd8f0a6..d7ffe299b979 100644 --- a/arch/blackfin/kernel/vmlinux.lds.S +++ b/arch/blackfin/kernel/vmlinux.lds.S @@ -277,9 +277,5 @@ SECTIONS DWARF_DEBUG - /DISCARD/ : - { - *(.exitcall.exit) - *(.discard) - } + DISCARDS } diff --git a/arch/cris/kernel/vmlinux.lds.S b/arch/cris/kernel/vmlinux.lds.S index a3175ebb38cc..6c81836b9229 100644 --- a/arch/cris/kernel/vmlinux.lds.S +++ b/arch/cris/kernel/vmlinux.lds.S @@ -140,13 +140,7 @@ SECTIONS _end = .; __end = .; - /* Sections to be discarded */ - /DISCARD/ : { - EXIT_TEXT - EXIT_DATA - *(.exitcall.exit) - *(.discard) - } - dram_end = dram_start + (CONFIG_ETRAX_DRAM_SIZE - __CONFIG_ETRAX_VMEM_SIZE)*1024*1024; + + DISCARDS } diff --git a/arch/frv/kernel/vmlinux.lds.S b/arch/frv/kernel/vmlinux.lds.S index 64b5a5e4d35e..7dbf41f68b52 100644 --- a/arch/frv/kernel/vmlinux.lds.S +++ b/arch/frv/kernel/vmlinux.lds.S @@ -178,7 +178,7 @@ SECTIONS .comment 0 : { *(.comment) } - /DISCARD/ : { *(.discard) } + DISCARDS } __kernel_image_size_no_bss = __bss_start - __kernel_image_start; diff --git a/arch/h8300/kernel/vmlinux.lds.S b/arch/h8300/kernel/vmlinux.lds.S index 03d6c0df33db..662b02ecb86e 100644 --- a/arch/h8300/kernel/vmlinux.lds.S +++ b/arch/h8300/kernel/vmlinux.lds.S @@ -152,10 +152,6 @@ SECTIONS __end = . ; __ramstart = .; } - /DISCARD/ : { - *(.exitcall.exit) - *(.discard) - } .romfs : { *(.romfs*) @@ -166,4 +162,6 @@ SECTIONS COMMAND_START = . - 0x200 ; __ramend = . ; } + + DISCARDS } diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S index 13d958975874..eb4214d1c5af 100644 --- a/arch/ia64/kernel/vmlinux.lds.S +++ b/arch/ia64/kernel/vmlinux.lds.S @@ -24,15 +24,14 @@ PHDRS { } SECTIONS { - /* Sections to be discarded */ + /* unwind exit sections must be discarded before the rest of the + sections get included. */ /DISCARD/ : { - EXIT_TEXT - EXIT_DATA - *(.exitcall.exit) - *(.discard) *(.IA_64.unwind.exit.text) *(.IA_64.unwind_info.exit.text) - } + *(.comment) + *(.note) + } v = PAGE_OFFSET; /* this symbol is here to make debugging easier... */ phys_start = _start - LOAD_OFFSET; @@ -317,7 +316,7 @@ SECTIONS .debug_funcnames 0 : { *(.debug_funcnames) } .debug_typenames 0 : { *(.debug_typenames) } .debug_varnames 0 : { *(.debug_varnames) } - /* These must appear regardless of . */ - /DISCARD/ : { *(.comment) } - /DISCARD/ : { *(.note) } + + /* Default discards */ + DISCARDS } diff --git a/arch/m32r/kernel/vmlinux.lds.S b/arch/m32r/kernel/vmlinux.lds.S index 480a49944cfd..de5e21cca6a5 100644 --- a/arch/m32r/kernel/vmlinux.lds.S +++ b/arch/m32r/kernel/vmlinux.lds.S @@ -120,14 +120,6 @@ SECTIONS _end = . ; - /* Sections to be discarded */ - /DISCARD/ : { - EXIT_TEXT - EXIT_DATA - *(.exitcall.exit) - *(.discard) - } - /* Stabs debugging sections. */ .stab 0 : { *(.stab) } .stabstr 0 : { *(.stabstr) } @@ -136,4 +128,7 @@ SECTIONS .stab.index 0 : { *(.stab.index) } .stab.indexstr 0 : { *(.stab.indexstr) } .comment 0 : { *(.comment) } + + /* Sections to be discarded */ + DISCARDS } diff --git a/arch/m68k/kernel/vmlinux-std.lds b/arch/m68k/kernel/vmlinux-std.lds index 905a797ada93..47eac19e8f61 100644 --- a/arch/m68k/kernel/vmlinux-std.lds +++ b/arch/m68k/kernel/vmlinux-std.lds @@ -82,14 +82,6 @@ SECTIONS _end = . ; - /* Sections to be discarded */ - /DISCARD/ : { - EXIT_TEXT - EXIT_DATA - *(.exitcall.exit) - *(.discard) - } - /* Stabs debugging sections. */ .stab 0 : { *(.stab) } .stabstr 0 : { *(.stabstr) } @@ -98,4 +90,7 @@ SECTIONS .stab.index 0 : { *(.stab.index) } .stab.indexstr 0 : { *(.stab.indexstr) } .comment 0 : { *(.comment) } + + /* Sections to be discarded */ + DISCARDS } diff --git a/arch/m68k/kernel/vmlinux-sun3.lds b/arch/m68k/kernel/vmlinux-sun3.lds index 47d04be322aa..03efaf04d7d7 100644 --- a/arch/m68k/kernel/vmlinux-sun3.lds +++ b/arch/m68k/kernel/vmlinux-sun3.lds @@ -77,14 +77,6 @@ __init_begin = .; _end = . ; - /* Sections to be discarded */ - /DISCARD/ : { - EXIT_TEXT - EXIT_DATA - *(.exitcall.exit) - *(.discard) - } - .crap : { /* Stabs debugging sections. */ *(.stab) @@ -97,4 +89,6 @@ __init_begin = .; *(.note) } + /* Sections to be discarded */ + DISCARDS } diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S index 68111a61a77f..2736a5e309c0 100644 --- a/arch/m68knommu/kernel/vmlinux.lds.S +++ b/arch/m68knommu/kernel/vmlinux.lds.S @@ -184,13 +184,6 @@ SECTIONS { __init_end = .; } > INIT - /DISCARD/ : { - EXIT_TEXT - EXIT_DATA - *(.exitcall.exit) - *(.discard) - } - .bss : { . = ALIGN(4); _sbss = . ; @@ -201,5 +194,6 @@ SECTIONS { _end = . ; } > BSS + DISCARDS } diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S index 81bebdcb18fe..ec5fa91a48d8 100644 --- a/arch/microblaze/kernel/vmlinux.lds.S +++ b/arch/microblaze/kernel/vmlinux.lds.S @@ -163,5 +163,5 @@ SECTIONS { . = ALIGN(4096); _end = .; - /DISCARD/ : { *(.discard) } + DISCARDS } diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index 45901609b741..1474c18fb777 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -176,18 +176,6 @@ SECTIONS _end = . ; - /* Sections to be discarded */ - /DISCARD/ : { - *(.exitcall.exit) - *(.discard) - - /* ABI crap starts here */ - *(.MIPS.options) - *(.options) - *(.pdr) - *(.reginfo) - } - /* These mark the ABI of the kernel for debuggers. */ .mdebug.abi32 : { KEEP(*(.mdebug.abi32)) @@ -213,4 +201,14 @@ SECTIONS *(.gptab.bss) *(.gptab.sbss) } + + /* Sections to be discarded */ + DISCARDS + /DISCARD/ : { + /* ABI crap starts here */ + *(.MIPS.options) + *(.options) + *(.pdr) + *(.reginfo) + } } diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S index 5609d4962a55..8fcd0f1e21de 100644 --- a/arch/mn10300/kernel/vmlinux.lds.S +++ b/arch/mn10300/kernel/vmlinux.lds.S @@ -115,13 +115,10 @@ SECTIONS . = ALIGN(PAGE_SIZE); pg0 = .; - /* Sections to be discarded */ - /DISCARD/ : { - EXIT_CALL - *(.discard) - } - STABS_DEBUG DWARF_DEBUG + + /* Sections to be discarded */ + DISCARDS } diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S index ccf58341845a..aea1784edbd1 100644 --- a/arch/parisc/kernel/vmlinux.lds.S +++ b/arch/parisc/kernel/vmlinux.lds.S @@ -237,10 +237,12 @@ SECTIONS /* freed after init ends here */ _end = . ; + STABS_DEBUG + .note 0 : { *(.note) } + /* Sections to be discarded */ + DISCARDS /DISCARD/ : { - *(.exitcall.exit) - *(.discard) #ifdef CONFIG_64BIT /* temporary hack until binutils is fixed to not emit these * for static binaries @@ -253,7 +255,4 @@ SECTIONS *(.gnu.hash) #endif } - - STABS_DEBUG - .note 0 : { *(.note) } } diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index 7fca9355fd3d..244e3658983c 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -37,13 +37,6 @@ jiffies = jiffies_64 + 4; #endif SECTIONS { - /* Sections to be discarded. */ - /DISCARD/ : { - *(.exitcall.exit) - *(.discard) - EXIT_DATA - } - . = KERNELBASE; /* @@ -299,4 +292,7 @@ SECTIONS . = ALIGN(PAGE_SIZE); _end = . ; PROVIDE32 (end = .); + + /* Sections to be discarded. */ + DISCARDS } diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S index 98867dfea469..82415c75b996 100644 --- a/arch/s390/kernel/vmlinux.lds.S +++ b/arch/s390/kernel/vmlinux.lds.S @@ -157,14 +157,10 @@ SECTIONS _end = . ; - /* Sections to be discarded */ - /DISCARD/ : { - EXIT_DATA - *(.exitcall.exit) - *(.discard) - } - /* Debugging sections. */ STABS_DEBUG DWARF_DEBUG + + /* Sections to be discarded */ + DISCARDS } diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S index 766976d27b21..0ce254bca92f 100644 --- a/arch/sh/kernel/vmlinux.lds.S +++ b/arch/sh/kernel/vmlinux.lds.S @@ -163,17 +163,14 @@ SECTIONS _end = . ; } + STABS_DEBUG + DWARF_DEBUG + /* * When something in the kernel is NOT compiled as a module, the * module cleanup code and data are put into these segments. Both * can then be thrown away, as cleanup code is never called unless * it's a module. */ - /DISCARD/ : { - *(.exitcall.exit) - *(.discard) - } - - STABS_DEBUG - DWARF_DEBUG + DISCARDS } diff --git a/arch/sparc/kernel/vmlinux.lds.S b/arch/sparc/kernel/vmlinux.lds.S index d63cf914667d..866390feb683 100644 --- a/arch/sparc/kernel/vmlinux.lds.S +++ b/arch/sparc/kernel/vmlinux.lds.S @@ -171,13 +171,8 @@ SECTIONS } _end = . ; - /DISCARD/ : { - EXIT_TEXT - EXIT_DATA - *(.exitcall.exit) - *(.discard) - } - STABS_DEBUG DWARF_DEBUG + + DISCARDS } diff --git a/arch/um/include/asm/common.lds.S b/arch/um/include/asm/common.lds.S index cb0248616d49..37ecc5577a9a 100644 --- a/arch/um/include/asm/common.lds.S +++ b/arch/um/include/asm/common.lds.S @@ -123,8 +123,3 @@ __initramfs_end = .; } - /* Sections to be discarded */ - /DISCARD/ : { - *(.exitcall.exit) - } - diff --git a/arch/um/kernel/dyn.lds.S b/arch/um/kernel/dyn.lds.S index 2916d6eadffd..715a188c0472 100644 --- a/arch/um/kernel/dyn.lds.S +++ b/arch/um/kernel/dyn.lds.S @@ -157,5 +157,5 @@ SECTIONS DWARF_DEBUG - /DISCARD/ : { *(.discard) } + DISCARDS } diff --git a/arch/um/kernel/uml.lds.S b/arch/um/kernel/uml.lds.S index 1f8a622cabe1..2ebd39765db8 100644 --- a/arch/um/kernel/uml.lds.S +++ b/arch/um/kernel/uml.lds.S @@ -101,5 +101,5 @@ SECTIONS DWARF_DEBUG - /DISCARD/ : { *(.discard) } + DISCARDS } diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S index 367e87882041..b600c843710b 100644 --- a/arch/x86/kernel/vmlinux.lds.S +++ b/arch/x86/kernel/vmlinux.lds.S @@ -387,15 +387,12 @@ SECTIONS _end = .; } - /* Sections to be discarded */ - /DISCARD/ : { - *(.exitcall.exit) - *(.eh_frame) - *(.discard) - } - STABS_DEBUG DWARF_DEBUG + + /* Sections to be discarded */ + DISCARDS + /DISCARD/ : { *(.eh_frame) } } diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S index b1e24638acd7..921b6ff3b645 100644 --- a/arch/xtensa/kernel/vmlinux.lds.S +++ b/arch/xtensa/kernel/vmlinux.lds.S @@ -280,16 +280,6 @@ SECTIONS *(.ResetVector.text) } - /* Sections to be discarded */ - /DISCARD/ : - { - *(.exit.literal) - EXIT_TEXT - EXIT_DATA - *(.exitcall.exit) - *(.discard) - } - .xt.lit : { *(.xt.lit) } .xt.prop : { *(.xt.prop) } @@ -322,4 +312,8 @@ SECTIONS *(.xt.lit) *(.gnu.linkonce.p*) } + + /* Sections to be discarded */ + DISCARDS + /DISCARD/ : { *(.exit.literal) } } -- cgit v1.2.2 From 872fb6dd6b07986417964e089074e7acfd025f4c Mon Sep 17 00:00:00 2001 From: Fenghua Yu Date: Mon, 13 Jul 2009 13:09:43 -0700 Subject: ia64: Fix setup_per_cpu_areas() compilation error Fix ia64 build setup_per_cpu_areas() redifinition issue in UP configuration. When compiling ia64 kernel in UP configuration, the following compilation errors are reported: arch/ia64/kernel/setup.c:860: error: redefinition of 'setup_per_cpu_areas' include/linux/percpu.h:185: error: previous definition of 'setup_per_cpu_areas' was here The patch fixes the issue in arch/ia64/kernel/setup.c Signed-off-by: Fenghua Yu Signed-off-by: Tejun Heo --- arch/ia64/kernel/setup.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index 1b23ec126b63..1de86c96801d 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -855,11 +855,17 @@ identify_cpu (struct cpuinfo_ia64 *c) c->unimpl_pa_mask = ~((1L<<63) | ((1L << phys_addr_size) - 1)); } +/* + * In UP configuration, setup_per_cpu_areas() is defined in + * include/linux/percpu.h + */ +#ifdef CONFIG_SMP void __init setup_per_cpu_areas (void) { /* start_kernel() requires this... */ } +#endif /* * Do the following calculations: -- cgit v1.2.2 From 00ae4064b1445524752575dd84df227c0687c99d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 14 Aug 2009 15:00:49 +0900 Subject: percpu: rename 4k first chunk allocator to page Page size isn't always 4k depending on arch and configuration. Rename 4k first chunk allocator to page. Signed-off-by: Tejun Heo Cc: David Howells --- arch/x86/kernel/setup_percpu.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c index a26ff61e2fb0..1e17711c29d6 100644 --- a/arch/x86/kernel/setup_percpu.c +++ b/arch/x86/kernel/setup_percpu.c @@ -249,21 +249,22 @@ static ssize_t __init setup_pcpu_embed(size_t static_size, bool chosen) } /* - * 4k allocator + * Page allocator * - * Boring fallback 4k allocator. This allocator puts more pressure on - * PTE TLBs but other than that behaves nicely on both UMA and NUMA. + * Boring fallback 4k page allocator. This allocator puts more + * pressure on PTE TLBs but other than that behaves nicely on both UMA + * and NUMA. */ -static void __init pcpu4k_populate_pte(unsigned long addr) +static void __init pcpup_populate_pte(unsigned long addr) { populate_extra_pte(addr); } -static ssize_t __init setup_pcpu_4k(size_t static_size) +static ssize_t __init setup_pcpu_page(size_t static_size) { - return pcpu_4k_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE, - pcpu_fc_alloc, pcpu_fc_free, - pcpu4k_populate_pte); + return pcpu_page_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE, + pcpu_fc_alloc, pcpu_fc_free, + pcpup_populate_pte); } /* for explicit first chunk allocator selection */ @@ -307,7 +308,7 @@ void __init setup_per_cpu_areas(void) */ ret = -EINVAL; if (strlen(pcpu_chosen_alloc)) { - if (strcmp(pcpu_chosen_alloc, "4k")) { + if (strcmp(pcpu_chosen_alloc, "page")) { if (!strcmp(pcpu_chosen_alloc, "lpage")) ret = setup_pcpu_lpage(static_size, true); else if (!strcmp(pcpu_chosen_alloc, "embed")) @@ -317,7 +318,7 @@ void __init setup_per_cpu_areas(void) "specified\n", pcpu_chosen_alloc); if (ret < 0) pr_warning("PERCPU: %s allocator failed (%zd), " - "falling back to 4k\n", + "falling back to page size\n", pcpu_chosen_alloc, ret); } } else { @@ -326,7 +327,7 @@ void __init setup_per_cpu_areas(void) ret = setup_pcpu_embed(static_size, false); } if (ret < 0) - ret = setup_pcpu_4k(static_size); + ret = setup_pcpu_page(static_size); if (ret < 0) panic("cannot allocate static percpu area (%zu bytes, err=%zd)", static_size, ret); -- cgit v1.2.2 From 08fc45806103e59a37418e84719b878f9bb32540 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 14 Aug 2009 15:00:49 +0900 Subject: percpu: build first chunk allocators selectively There's no need to build unused first chunk allocators in. Define CONFIG_NEED_PER_CPU_*_FIRST_CHUNK and let archs enable them selectively. Signed-off-by: Tejun Heo --- arch/x86/Kconfig | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index e06b2eeff9f2..f7ac27215512 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -150,6 +150,16 @@ config ARCH_HAS_CACHE_LINE_SIZE config HAVE_SETUP_PER_CPU_AREA def_bool y +config NEED_PER_CPU_EMBED_FIRST_CHUNK + def_bool y + +config NEED_PER_CPU_PAGE_FIRST_CHUNK + def_bool y + +config NEED_PER_CPU_LPAGE_FIRST_CHUNK + def_bool y + depends on NEED_MULTIPLE_NODES + config HAVE_CPUMASK_OF_CPU_MAP def_bool X86_64_SMP -- cgit v1.2.2 From f58dc01ba2ca9fe3ab2ba4ca43d9c8a735cf62d8 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 14 Aug 2009 15:00:50 +0900 Subject: percpu: generalize first chunk allocator selection Now that all first chunk allocators are in mm/percpu.c, it makes sense to make generalize percpu_alloc kernel parameter. Define PCPU_FC_* and set pcpu_chosen_fc using early_param() in mm/percpu.c. Arch code can use the set value to determine which first chunk allocator to use. Signed-off-by: Tejun Heo --- arch/x86/kernel/setup_percpu.c | 24 ++++++------------------ 1 file changed, 6 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c index 1e17711c29d6..b961d99e6416 100644 --- a/arch/x86/kernel/setup_percpu.c +++ b/arch/x86/kernel/setup_percpu.c @@ -267,16 +267,6 @@ static ssize_t __init setup_pcpu_page(size_t static_size) pcpup_populate_pte); } -/* for explicit first chunk allocator selection */ -static char pcpu_chosen_alloc[16] __initdata; - -static int __init percpu_alloc_setup(char *str) -{ - strncpy(pcpu_chosen_alloc, str, sizeof(pcpu_chosen_alloc) - 1); - return 0; -} -early_param("percpu_alloc", percpu_alloc_setup); - static inline void setup_percpu_segment(int cpu) { #ifdef CONFIG_X86_32 @@ -307,19 +297,17 @@ void __init setup_per_cpu_areas(void) * each allocator for details. */ ret = -EINVAL; - if (strlen(pcpu_chosen_alloc)) { - if (strcmp(pcpu_chosen_alloc, "page")) { - if (!strcmp(pcpu_chosen_alloc, "lpage")) + if (pcpu_chosen_fc != PCPU_FC_AUTO) { + if (pcpu_chosen_fc != PCPU_FC_PAGE) { + if (pcpu_chosen_fc == PCPU_FC_LPAGE) ret = setup_pcpu_lpage(static_size, true); - else if (!strcmp(pcpu_chosen_alloc, "embed")) - ret = setup_pcpu_embed(static_size, true); else - pr_warning("PERCPU: unknown allocator %s " - "specified\n", pcpu_chosen_alloc); + ret = setup_pcpu_embed(static_size, true); + if (ret < 0) pr_warning("PERCPU: %s allocator failed (%zd), " "falling back to page size\n", - pcpu_chosen_alloc, ret); + pcpu_fc_names[pcpu_chosen_fc], ret); } } else { ret = setup_pcpu_lpage(static_size, false); -- cgit v1.2.2 From 9a7737691e90d3cce0e5248f91826c50e5aa3fcf Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 14 Aug 2009 15:00:50 +0900 Subject: percpu: drop @static_size from first chunk allocators First chunk allocators assume percpu areas have been linked using one of PERCPU_*() macros and depend on __per_cpu_load symbol defined by those macros, so there isn't much point in passing in static area size explicitly when it can be easily calculated from __per_cpu_start and __per_cpu_end. Drop @static_size from all percpu first chunk allocators and helpers. Signed-off-by: Tejun Heo --- arch/x86/kernel/setup_percpu.c | 34 +++++++++++++++------------------- 1 file changed, 15 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c index b961d99e6416..8aad486c688f 100644 --- a/arch/x86/kernel/setup_percpu.c +++ b/arch/x86/kernel/setup_percpu.c @@ -157,7 +157,7 @@ static int pcpu_lpage_cpu_distance(unsigned int from, unsigned int to) return REMOTE_DISTANCE; } -static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen) +static ssize_t __init setup_pcpu_lpage(bool chosen) { size_t reserve = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE; size_t dyn_size = reserve - PERCPU_FIRST_CHUNK_RESERVE; @@ -184,8 +184,7 @@ static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen) return -ENOMEM; } - ret = pcpu_lpage_build_unit_map(static_size, - PERCPU_FIRST_CHUNK_RESERVE, + ret = pcpu_lpage_build_unit_map(PERCPU_FIRST_CHUNK_RESERVE, &dyn_size, &unit_size, PMD_SIZE, unit_map, pcpu_lpage_cpu_distance); if (ret < 0) { @@ -208,9 +207,8 @@ static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen) } } - ret = pcpu_lpage_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE, - dyn_size, unit_size, PMD_SIZE, - unit_map, nr_units, + ret = pcpu_lpage_first_chunk(PERCPU_FIRST_CHUNK_RESERVE, dyn_size, + unit_size, PMD_SIZE, unit_map, nr_units, pcpu_fc_alloc, pcpu_fc_free, pcpul_map); out_free: if (ret < 0) @@ -218,7 +216,7 @@ out_free: return ret; } #else -static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen) +static ssize_t __init setup_pcpu_lpage(bool chosen) { return -EINVAL; } @@ -232,7 +230,7 @@ static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen) * mapping so that it can use PMD mapping without additional TLB * pressure. */ -static ssize_t __init setup_pcpu_embed(size_t static_size, bool chosen) +static ssize_t __init setup_pcpu_embed(bool chosen) { size_t reserve = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE; @@ -244,7 +242,7 @@ static ssize_t __init setup_pcpu_embed(size_t static_size, bool chosen) if (!chosen && (!cpu_has_pse || pcpu_need_numa())) return -EINVAL; - return pcpu_embed_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE, + return pcpu_embed_first_chunk(PERCPU_FIRST_CHUNK_RESERVE, reserve - PERCPU_FIRST_CHUNK_RESERVE); } @@ -260,9 +258,9 @@ static void __init pcpup_populate_pte(unsigned long addr) populate_extra_pte(addr); } -static ssize_t __init setup_pcpu_page(size_t static_size) +static ssize_t __init setup_pcpu_page(void) { - return pcpu_page_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE, + return pcpu_page_first_chunk(PERCPU_FIRST_CHUNK_RESERVE, pcpu_fc_alloc, pcpu_fc_free, pcpup_populate_pte); } @@ -282,7 +280,6 @@ static inline void setup_percpu_segment(int cpu) void __init setup_per_cpu_areas(void) { - size_t static_size = __per_cpu_end - __per_cpu_start; unsigned int cpu; unsigned long delta; size_t pcpu_unit_size; @@ -300,9 +297,9 @@ void __init setup_per_cpu_areas(void) if (pcpu_chosen_fc != PCPU_FC_AUTO) { if (pcpu_chosen_fc != PCPU_FC_PAGE) { if (pcpu_chosen_fc == PCPU_FC_LPAGE) - ret = setup_pcpu_lpage(static_size, true); + ret = setup_pcpu_lpage(true); else - ret = setup_pcpu_embed(static_size, true); + ret = setup_pcpu_embed(true); if (ret < 0) pr_warning("PERCPU: %s allocator failed (%zd), " @@ -310,15 +307,14 @@ void __init setup_per_cpu_areas(void) pcpu_fc_names[pcpu_chosen_fc], ret); } } else { - ret = setup_pcpu_lpage(static_size, false); + ret = setup_pcpu_lpage(false); if (ret < 0) - ret = setup_pcpu_embed(static_size, false); + ret = setup_pcpu_embed(false); } if (ret < 0) - ret = setup_pcpu_page(static_size); + ret = setup_pcpu_page(); if (ret < 0) - panic("cannot allocate static percpu area (%zu bytes, err=%zd)", - static_size, ret); + panic("cannot initialize percpu area (err=%zd)", ret); pcpu_unit_size = ret; -- cgit v1.2.2 From 3cbc85652767c38b252c8de55f9fd180b29e4c0d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 14 Aug 2009 15:00:50 +0900 Subject: percpu: add @align to pcpu_fc_alloc_fn_t pcpu_fc_alloc_fn_t is about to see more interesting usage, add @align parameter. Signed-off-by: Tejun Heo --- arch/x86/kernel/setup_percpu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c index 8aad486c688f..660cde133141 100644 --- a/arch/x86/kernel/setup_percpu.c +++ b/arch/x86/kernel/setup_percpu.c @@ -126,9 +126,9 @@ static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size, /* * Helpers for first chunk memory allocation */ -static void * __init pcpu_fc_alloc(unsigned int cpu, size_t size) +static void * __init pcpu_fc_alloc(unsigned int cpu, size_t size, size_t align) { - return pcpu_alloc_bootmem(cpu, size, size); + return pcpu_alloc_bootmem(cpu, size, align); } static void __init pcpu_fc_free(void *ptr, size_t size) -- cgit v1.2.2 From fd1e8a1fe2b54df6c185b4fa65f181f50b9c4d4e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 14 Aug 2009 15:00:51 +0900 Subject: percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo Cc: Ingo Molnar Cc: David Miller --- arch/sparc/kernel/smp_64.c | 24 +++++++++++++++++------- arch/x86/kernel/setup_percpu.c | 38 +++++++++++++++----------------------- 2 files changed, 32 insertions(+), 30 deletions(-) (limited to 'arch') diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c index 9856d866b77b..a42a4a744d14 100644 --- a/arch/sparc/kernel/smp_64.c +++ b/arch/sparc/kernel/smp_64.c @@ -1475,17 +1475,29 @@ static void __init pcpu_map_range(unsigned long start, unsigned long end, void __init setup_per_cpu_areas(void) { - size_t dyn_size, static_size = __per_cpu_end - __per_cpu_start; static struct vm_struct vm; + struct pcpu_alloc_info *ai; unsigned long delta, cpu; size_t size_sum, pcpu_unit_size; size_t ptrs_size; void **ptrs; - size_sum = PFN_ALIGN(static_size + PERCPU_MODULE_RESERVE + + ai = pcpu_alloc_alloc_info(1, nr_cpu_ids); + + ai->static_size = __per_cpu_end - __per_cpu_start; + ai->reserved_size = PERCPU_MODULE_RESERVE; + + size_sum = PFN_ALIGN(ai->static_size + ai->reserved_size + PERCPU_DYNAMIC_RESERVE); - dyn_size = size_sum - static_size - PERCPU_MODULE_RESERVE; + ai->dyn_size = size_sum - ai->static_size - ai->reserved_size; + ai->unit_size = PCPU_CHUNK_SIZE; + ai->atom_size = PCPU_CHUNK_SIZE; + ai->alloc_size = PCPU_CHUNK_SIZE; + ai->groups[0].nr_units = nr_cpu_ids; + + for_each_possible_cpu(cpu) + ai->groups[0].cpu_map[cpu] = cpu; ptrs_size = PFN_ALIGN(nr_cpu_ids * sizeof(ptrs[0])); ptrs = alloc_bootmem(ptrs_size); @@ -1497,7 +1509,7 @@ void __init setup_per_cpu_areas(void) free_bootmem(__pa(ptrs[cpu] + size_sum), PCPU_CHUNK_SIZE - size_sum); - memcpy(ptrs[cpu], __per_cpu_load, static_size); + memcpy(ptrs[cpu], __per_cpu_load, ai->static_size); } /* allocate address and map */ @@ -1514,9 +1526,7 @@ void __init setup_per_cpu_areas(void) pcpu_map_range(start, end, virt_to_page(ptrs[cpu])); } - pcpu_unit_size = pcpu_setup_first_chunk(static_size, - PERCPU_MODULE_RESERVE, dyn_size, - PCPU_CHUNK_SIZE, vm.addr, NULL); + pcpu_unit_size = pcpu_setup_first_chunk(ai, vm.addr); free_bootmem(__pa(ptrs), ptrs_size); diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c index 660cde133141..db5f9c49fec5 100644 --- a/arch/x86/kernel/setup_percpu.c +++ b/arch/x86/kernel/setup_percpu.c @@ -161,9 +161,7 @@ static ssize_t __init setup_pcpu_lpage(bool chosen) { size_t reserve = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE; size_t dyn_size = reserve - PERCPU_FIRST_CHUNK_RESERVE; - size_t unit_map_size, unit_size; - int *unit_map; - int nr_units; + struct pcpu_alloc_info *ai; ssize_t ret; /* on non-NUMA, embedding is better */ @@ -177,26 +175,22 @@ static ssize_t __init setup_pcpu_lpage(bool chosen) } /* allocate and build unit_map */ - unit_map_size = nr_cpu_ids * sizeof(int); - unit_map = alloc_bootmem_nopanic(unit_map_size); - if (!unit_map) { - pr_warning("PERCPU: failed to allocate unit_map\n"); - return -ENOMEM; + ai = pcpu_build_alloc_info(PERCPU_FIRST_CHUNK_RESERVE, dyn_size, + PMD_SIZE, pcpu_lpage_cpu_distance); + if (IS_ERR(ai)) { + pr_warning("PERCPU: failed to build unit_map (%ld)\n", + PTR_ERR(ai)); + return PTR_ERR(ai); } - ret = pcpu_lpage_build_unit_map(PERCPU_FIRST_CHUNK_RESERVE, - &dyn_size, &unit_size, PMD_SIZE, - unit_map, pcpu_lpage_cpu_distance); - if (ret < 0) { - pr_warning("PERCPU: failed to build unit_map\n"); - goto out_free; - } - nr_units = ret; - /* do the parameters look okay? */ if (!chosen) { size_t vm_size = VMALLOC_END - VMALLOC_START; - size_t tot_size = nr_units * unit_size; + size_t tot_size = 0; + int group; + + for (group = 0; group < ai->nr_groups; group++) + tot_size += ai->unit_size * ai->groups[group].nr_units; /* don't consume more than 20% of vmalloc area */ if (tot_size > vm_size / 5) { @@ -207,12 +201,10 @@ static ssize_t __init setup_pcpu_lpage(bool chosen) } } - ret = pcpu_lpage_first_chunk(PERCPU_FIRST_CHUNK_RESERVE, dyn_size, - unit_size, PMD_SIZE, unit_map, nr_units, - pcpu_fc_alloc, pcpu_fc_free, pcpul_map); + ret = pcpu_lpage_first_chunk(ai, pcpu_fc_alloc, pcpu_fc_free, + pcpul_map); out_free: - if (ret < 0) - free_bootmem(__pa(unit_map), unit_map_size); + pcpu_free_alloc_info(ai); return ret; } #else -- cgit v1.2.2 From fb435d5233f8b6f9b93c11d6304d8e98fed03234 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 14 Aug 2009 15:00:51 +0900 Subject: percpu: add pcpu_unit_offsets[] Currently units are mapped sequentially into address space. This patch adds pcpu_unit_offsets[] which allows units to be mapped to arbitrary offsets from the chunk base address. This is necessary to allow sparse embedding which might would need to allocate address ranges and memory areas which aren't aligned to unit size but allocation atom size (page or large page size). This also simplifies things a bit by removing the need to calculate offset from unit number. With this change, there's no need for the arch code to know pcpu_unit_size. Update pcpu_setup_first_chunk() and first chunk allocators to return regular 0 or -errno return code instead of unit size or -errno. Signed-off-by: Tejun Heo Cc: David S. Miller --- arch/sparc/kernel/smp_64.c | 12 +++++----- arch/x86/kernel/setup_percpu.c | 51 +++++++++++++++++++----------------------- 2 files changed, 30 insertions(+), 33 deletions(-) (limited to 'arch') diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c index a42a4a744d14..b03fd362c629 100644 --- a/arch/sparc/kernel/smp_64.c +++ b/arch/sparc/kernel/smp_64.c @@ -1478,9 +1478,10 @@ void __init setup_per_cpu_areas(void) static struct vm_struct vm; struct pcpu_alloc_info *ai; unsigned long delta, cpu; - size_t size_sum, pcpu_unit_size; + size_t size_sum; size_t ptrs_size; void **ptrs; + int rc; ai = pcpu_alloc_alloc_info(1, nr_cpu_ids); @@ -1526,14 +1527,15 @@ void __init setup_per_cpu_areas(void) pcpu_map_range(start, end, virt_to_page(ptrs[cpu])); } - pcpu_unit_size = pcpu_setup_first_chunk(ai, vm.addr); + rc = pcpu_setup_first_chunk(ai, vm.addr); + if (rc) + panic("failed to setup percpu first chunk (%d)", rc); free_bootmem(__pa(ptrs), ptrs_size); delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start; - for_each_possible_cpu(cpu) { - __per_cpu_offset(cpu) = delta + cpu * pcpu_unit_size; - } + for_each_possible_cpu(cpu) + __per_cpu_offset(cpu) = delta + pcpu_unit_offsets[cpu]; /* Setup %g5 for the boot cpu. */ __local_per_cpu_offset = __per_cpu_offset(smp_processor_id()); diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c index db5f9c49fec5..9becc5d4b518 100644 --- a/arch/x86/kernel/setup_percpu.c +++ b/arch/x86/kernel/setup_percpu.c @@ -157,12 +157,12 @@ static int pcpu_lpage_cpu_distance(unsigned int from, unsigned int to) return REMOTE_DISTANCE; } -static ssize_t __init setup_pcpu_lpage(bool chosen) +static int __init setup_pcpu_lpage(bool chosen) { size_t reserve = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE; size_t dyn_size = reserve - PERCPU_FIRST_CHUNK_RESERVE; struct pcpu_alloc_info *ai; - ssize_t ret; + int rc; /* on non-NUMA, embedding is better */ if (!chosen && !pcpu_need_numa()) @@ -196,19 +196,18 @@ static ssize_t __init setup_pcpu_lpage(bool chosen) if (tot_size > vm_size / 5) { pr_info("PERCPU: too large chunk size %zuMB for " "large page remap\n", tot_size >> 20); - ret = -EINVAL; + rc = -EINVAL; goto out_free; } } - ret = pcpu_lpage_first_chunk(ai, pcpu_fc_alloc, pcpu_fc_free, - pcpul_map); + rc = pcpu_lpage_first_chunk(ai, pcpu_fc_alloc, pcpu_fc_free, pcpul_map); out_free: pcpu_free_alloc_info(ai); - return ret; + return rc; } #else -static ssize_t __init setup_pcpu_lpage(bool chosen) +static int __init setup_pcpu_lpage(bool chosen) { return -EINVAL; } @@ -222,7 +221,7 @@ static ssize_t __init setup_pcpu_lpage(bool chosen) * mapping so that it can use PMD mapping without additional TLB * pressure. */ -static ssize_t __init setup_pcpu_embed(bool chosen) +static int __init setup_pcpu_embed(bool chosen) { size_t reserve = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE; @@ -250,7 +249,7 @@ static void __init pcpup_populate_pte(unsigned long addr) populate_extra_pte(addr); } -static ssize_t __init setup_pcpu_page(void) +static int __init setup_pcpu_page(void) { return pcpu_page_first_chunk(PERCPU_FIRST_CHUNK_RESERVE, pcpu_fc_alloc, pcpu_fc_free, @@ -274,8 +273,7 @@ void __init setup_per_cpu_areas(void) { unsigned int cpu; unsigned long delta; - size_t pcpu_unit_size; - ssize_t ret; + int rc; pr_info("NR_CPUS:%d nr_cpumask_bits:%d nr_cpu_ids:%d nr_node_ids:%d\n", NR_CPUS, nr_cpumask_bits, nr_cpu_ids, nr_node_ids); @@ -285,36 +283,33 @@ void __init setup_per_cpu_areas(void) * of large page mappings. Please read comments on top of * each allocator for details. */ - ret = -EINVAL; + rc = -EINVAL; if (pcpu_chosen_fc != PCPU_FC_AUTO) { if (pcpu_chosen_fc != PCPU_FC_PAGE) { if (pcpu_chosen_fc == PCPU_FC_LPAGE) - ret = setup_pcpu_lpage(true); + rc = setup_pcpu_lpage(true); else - ret = setup_pcpu_embed(true); + rc = setup_pcpu_embed(true); - if (ret < 0) - pr_warning("PERCPU: %s allocator failed (%zd), " + if (rc < 0) + pr_warning("PERCPU: %s allocator failed (%d), " "falling back to page size\n", - pcpu_fc_names[pcpu_chosen_fc], ret); + pcpu_fc_names[pcpu_chosen_fc], rc); } } else { - ret = setup_pcpu_lpage(false); - if (ret < 0) - ret = setup_pcpu_embed(false); + rc = setup_pcpu_lpage(false); + if (rc < 0) + rc = setup_pcpu_embed(false); } - if (ret < 0) - ret = setup_pcpu_page(); - if (ret < 0) - panic("cannot initialize percpu area (err=%zd)", ret); - - pcpu_unit_size = ret; + if (rc < 0) + rc = setup_pcpu_page(); + if (rc < 0) + panic("cannot initialize percpu area (err=%d)", rc); /* alrighty, percpu areas up and running */ delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start; for_each_possible_cpu(cpu) { - per_cpu_offset(cpu) = - delta + pcpu_unit_map[cpu] * pcpu_unit_size; + per_cpu_offset(cpu) = delta + pcpu_unit_offsets[cpu]; per_cpu(this_cpu_off, cpu) = per_cpu_offset(cpu); per_cpu(cpu_number, cpu) = cpu; setup_percpu_segment(cpu); -- cgit v1.2.2 From c8826dd538602d730ed2c18c6753f1bbfa6c4933 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 14 Aug 2009 15:00:52 +0900 Subject: percpu: update embedding first chunk allocator to handle sparse units Now that percpu core can handle very sparse units, given that vmalloc space is large enough, embedding first chunk allocator can use any memory to build the first chunk. This patch teaches pcpu_embed_first_chunk() about distances between cpus and to use alloc/free callbacks to allocate node specific areas for each group and use them for the first chunk. This brings the benefits of embedding allocator to NUMA configurations - no extra TLB pressure with the flexibility of unified dynamic allocator and no need to restructure arch code to build memory layout suitable for percpu. With units put into atom_size aligned groups according to cpu distances, using large page for dynamic chunks is also easily possible with falling back to reuglar pages if large allocation fails. Embedding allocator users are converted to specify NULL cpu_distance_fn, so this patch doesn't cause any visible behavior difference. Following patches will convert them. Signed-off-by: Tejun Heo --- arch/x86/kernel/setup_percpu.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c index 9becc5d4b518..67f6314de9f1 100644 --- a/arch/x86/kernel/setup_percpu.c +++ b/arch/x86/kernel/setup_percpu.c @@ -234,7 +234,9 @@ static int __init setup_pcpu_embed(bool chosen) return -EINVAL; return pcpu_embed_first_chunk(PERCPU_FIRST_CHUNK_RESERVE, - reserve - PERCPU_FIRST_CHUNK_RESERVE); + reserve - PERCPU_FIRST_CHUNK_RESERVE, + PAGE_SIZE, NULL, pcpu_fc_alloc, + pcpu_fc_free); } /* -- cgit v1.2.2 From 4518e6a0c038b98be4c480e6f4481e8676bd15dd Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 14 Aug 2009 15:00:52 +0900 Subject: x86,percpu: use embedding for 64bit NUMA and page for 32bit NUMA Embedding percpu first chunk allocator can now handle very sparse unit mapping. Use embedding allocator instead of lpage for 64bit NUMA. This removes extra TLB pressure and the need to do complex and fragile dancing when changing page attributes. For 32bit, using very sparse unit mapping isn't a good idea because the vmalloc space is very constrained. 32bit NUMA machines aren't exactly the focus of optimization and it isn't very clear whether lpage performs better than page. Use page first chunk allocator for 32bit NUMAs. As this leaves setup_pcpu_*() functions pretty much empty, fold them into setup_per_cpu_areas(). Signed-off-by: Tejun Heo Cc: Ingo Molnar Cc: Andi Kleen --- arch/x86/Kconfig | 4 -- arch/x86/kernel/setup_percpu.c | 155 ++++++++--------------------------------- 2 files changed, 28 insertions(+), 131 deletions(-) (limited to 'arch') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index f7ac27215512..869d7d301448 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -156,10 +156,6 @@ config NEED_PER_CPU_EMBED_FIRST_CHUNK config NEED_PER_CPU_PAGE_FIRST_CHUNK def_bool y -config NEED_PER_CPU_LPAGE_FIRST_CHUNK - def_bool y - depends on NEED_MULTIPLE_NODES - config HAVE_CPUMASK_OF_CPU_MAP def_bool X86_64_SMP diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c index 67f6314de9f1..d559af913e1f 100644 --- a/arch/x86/kernel/setup_percpu.c +++ b/arch/x86/kernel/setup_percpu.c @@ -55,6 +55,7 @@ EXPORT_SYMBOL(__per_cpu_offset); #define PERCPU_FIRST_CHUNK_RESERVE 0 #endif +#ifdef CONFIG_X86_32 /** * pcpu_need_numa - determine percpu allocation needs to consider NUMA * @@ -83,6 +84,7 @@ static bool __init pcpu_need_numa(void) #endif return false; } +#endif /** * pcpu_alloc_bootmem - NUMA friendly alloc_bootmem wrapper for percpu @@ -136,128 +138,23 @@ static void __init pcpu_fc_free(void *ptr, size_t size) free_bootmem(__pa(ptr), size); } -/* - * Large page remapping allocator - */ -#ifdef CONFIG_NEED_MULTIPLE_NODES -static void __init pcpul_map(void *ptr, size_t size, void *addr) -{ - pmd_t *pmd, pmd_v; - - pmd = populate_extra_pmd((unsigned long)addr); - pmd_v = pfn_pmd(page_to_pfn(virt_to_page(ptr)), PAGE_KERNEL_LARGE); - set_pmd(pmd, pmd_v); -} - -static int pcpu_lpage_cpu_distance(unsigned int from, unsigned int to) +static int __init pcpu_cpu_distance(unsigned int from, unsigned int to) { +#ifdef CONFIG_NEED_MULTIPLE_NODES if (early_cpu_to_node(from) == early_cpu_to_node(to)) return LOCAL_DISTANCE; else return REMOTE_DISTANCE; -} - -static int __init setup_pcpu_lpage(bool chosen) -{ - size_t reserve = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE; - size_t dyn_size = reserve - PERCPU_FIRST_CHUNK_RESERVE; - struct pcpu_alloc_info *ai; - int rc; - - /* on non-NUMA, embedding is better */ - if (!chosen && !pcpu_need_numa()) - return -EINVAL; - - /* need PSE */ - if (!cpu_has_pse) { - pr_warning("PERCPU: lpage allocator requires PSE\n"); - return -EINVAL; - } - - /* allocate and build unit_map */ - ai = pcpu_build_alloc_info(PERCPU_FIRST_CHUNK_RESERVE, dyn_size, - PMD_SIZE, pcpu_lpage_cpu_distance); - if (IS_ERR(ai)) { - pr_warning("PERCPU: failed to build unit_map (%ld)\n", - PTR_ERR(ai)); - return PTR_ERR(ai); - } - - /* do the parameters look okay? */ - if (!chosen) { - size_t vm_size = VMALLOC_END - VMALLOC_START; - size_t tot_size = 0; - int group; - - for (group = 0; group < ai->nr_groups; group++) - tot_size += ai->unit_size * ai->groups[group].nr_units; - - /* don't consume more than 20% of vmalloc area */ - if (tot_size > vm_size / 5) { - pr_info("PERCPU: too large chunk size %zuMB for " - "large page remap\n", tot_size >> 20); - rc = -EINVAL; - goto out_free; - } - } - - rc = pcpu_lpage_first_chunk(ai, pcpu_fc_alloc, pcpu_fc_free, pcpul_map); -out_free: - pcpu_free_alloc_info(ai); - return rc; -} #else -static int __init setup_pcpu_lpage(bool chosen) -{ - return -EINVAL; -} + return LOCAL_DISTANCE; #endif - -/* - * Embedding allocator - * - * The first chunk is sized to just contain the static area plus - * module and dynamic reserves and embedded into linear physical - * mapping so that it can use PMD mapping without additional TLB - * pressure. - */ -static int __init setup_pcpu_embed(bool chosen) -{ - size_t reserve = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE; - - /* - * If large page isn't supported, there's no benefit in doing - * this. Also, embedding allocation doesn't play well with - * NUMA. - */ - if (!chosen && (!cpu_has_pse || pcpu_need_numa())) - return -EINVAL; - - return pcpu_embed_first_chunk(PERCPU_FIRST_CHUNK_RESERVE, - reserve - PERCPU_FIRST_CHUNK_RESERVE, - PAGE_SIZE, NULL, pcpu_fc_alloc, - pcpu_fc_free); } -/* - * Page allocator - * - * Boring fallback 4k page allocator. This allocator puts more - * pressure on PTE TLBs but other than that behaves nicely on both UMA - * and NUMA. - */ static void __init pcpup_populate_pte(unsigned long addr) { populate_extra_pte(addr); } -static int __init setup_pcpu_page(void) -{ - return pcpu_page_first_chunk(PERCPU_FIRST_CHUNK_RESERVE, - pcpu_fc_alloc, pcpu_fc_free, - pcpup_populate_pte); -} - static inline void setup_percpu_segment(int cpu) { #ifdef CONFIG_X86_32 @@ -281,30 +178,34 @@ void __init setup_per_cpu_areas(void) NR_CPUS, nr_cpumask_bits, nr_cpu_ids, nr_node_ids); /* - * Allocate percpu area. If PSE is supported, try to make use - * of large page mappings. Please read comments on top of - * each allocator for details. + * Allocate percpu area. Embedding allocator is our favorite; + * however, on NUMA configurations, it can result in very + * sparse unit mapping and vmalloc area isn't spacious enough + * on 32bit. Use page in that case. */ +#ifdef CONFIG_X86_32 + if (pcpu_chosen_fc == PCPU_FC_AUTO && pcpu_need_numa()) + pcpu_chosen_fc = PCPU_FC_PAGE; +#endif rc = -EINVAL; - if (pcpu_chosen_fc != PCPU_FC_AUTO) { - if (pcpu_chosen_fc != PCPU_FC_PAGE) { - if (pcpu_chosen_fc == PCPU_FC_LPAGE) - rc = setup_pcpu_lpage(true); - else - rc = setup_pcpu_embed(true); - - if (rc < 0) - pr_warning("PERCPU: %s allocator failed (%d), " - "falling back to page size\n", - pcpu_fc_names[pcpu_chosen_fc], rc); - } - } else { - rc = setup_pcpu_lpage(false); + if (pcpu_chosen_fc != PCPU_FC_PAGE) { + const size_t atom_size = cpu_has_pse ? PMD_SIZE : PAGE_SIZE; + const size_t dyn_size = PERCPU_MODULE_RESERVE + + PERCPU_DYNAMIC_RESERVE - PERCPU_FIRST_CHUNK_RESERVE; + + rc = pcpu_embed_first_chunk(PERCPU_FIRST_CHUNK_RESERVE, + dyn_size, atom_size, + pcpu_cpu_distance, + pcpu_fc_alloc, pcpu_fc_free); if (rc < 0) - rc = setup_pcpu_embed(false); + pr_warning("PERCPU: %s allocator failed (%d), " + "falling back to page size\n", + pcpu_fc_names[pcpu_chosen_fc], rc); } if (rc < 0) - rc = setup_pcpu_page(); + rc = pcpu_page_first_chunk(PERCPU_FIRST_CHUNK_RESERVE, + pcpu_fc_alloc, pcpu_fc_free, + pcpup_populate_pte); if (rc < 0) panic("cannot initialize percpu area (err=%d)", rc); -- cgit v1.2.2 From e933a73f48e3b2d40cfa56d81e2646f194b5a66a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 14 Aug 2009 15:00:53 +0900 Subject: percpu: kill lpage first chunk allocator With x86 converted to embedding allocator, lpage doesn't have any user left. Kill it along with cpa handling code. Signed-off-by: Tejun Heo Cc: Jan Beulich --- arch/x86/mm/pageattr.c | 20 +------------------- 1 file changed, 1 insertion(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index dce282f65700..f53cfc7f963d 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -687,7 +687,7 @@ static int cpa_process_alias(struct cpa_data *cpa) { struct cpa_data alias_cpa; unsigned long laddr = (unsigned long)__va(cpa->pfn << PAGE_SHIFT); - unsigned long vaddr, remapped; + unsigned long vaddr; int ret; if (cpa->pfn >= max_pfn_mapped) @@ -745,24 +745,6 @@ static int cpa_process_alias(struct cpa_data *cpa) } #endif - /* - * If the PMD page was partially used for per-cpu remapping, - * the recycled area needs to be split and modified. Because - * the area is always proper subset of a PMD page - * cpa->numpages is guaranteed to be 1 for these areas, so - * there's no need to loop over and check for further remaps. - */ - remapped = (unsigned long)pcpu_lpage_remapped((void *)laddr); - if (remapped) { - WARN_ON(cpa->numpages > 1); - alias_cpa = *cpa; - alias_cpa.vaddr = &remapped; - alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY); - ret = __change_page_attr_set_clr(&alias_cpa, 0); - if (ret) - return ret; - } - return 0; } -- cgit v1.2.2 From bcb2107fdbecef3de55d597d23453747af81ba88 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 14 Aug 2009 15:00:53 +0900 Subject: sparc64: use embedding percpu first chunk allocator sparc64 currently allocates a large page for each cpu and partially remap them into vmalloc area much like what lpage first chunk allocator did. As a 4M page is used for each cpu, this results in very large unit size and also adds TLB pressure due to the double mapping of pages in the first chunk. This patch converts sparc64 to use the embedding percpu first chunk allocator which now knows how to handle NUMA configurations. This simplifies the code a lot, doesn't incur any extra TLB pressure and results in better utilization of address space. Signed-off-by: Tejun Heo Acked-by: David S. Miller --- arch/sparc/Kconfig | 3 ++ arch/sparc/kernel/smp_64.c | 128 +++++++-------------------------------------- 2 files changed, 21 insertions(+), 110 deletions(-) (limited to 'arch') diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 4f6ed0f113f0..fbd1233b392d 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -95,6 +95,9 @@ config AUDIT_ARCH config HAVE_SETUP_PER_CPU_AREA def_bool y if SPARC64 +config NEED_PER_CPU_EMBED_FIRST_CHUNK + def_bool y if SPARC64 + config GENERIC_HARDIRQS_NO__DO_IRQ bool def_bool y if SPARC64 diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c index b03fd362c629..ff68373ce6d6 100644 --- a/arch/sparc/kernel/smp_64.c +++ b/arch/sparc/kernel/smp_64.c @@ -1389,8 +1389,8 @@ void smp_send_stop(void) * RETURNS: * Pointer to the allocated area on success, NULL on failure. */ -static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size, - unsigned long align) +static void * __init pcpu_alloc_bootmem(unsigned int cpu, size_t size, + size_t align) { const unsigned long goal = __pa(MAX_DMA_ADDRESS); #ifdef CONFIG_NEED_MULTIPLE_NODES @@ -1415,123 +1415,31 @@ static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size, #endif } -#define PCPU_CHUNK_SIZE (4UL * 1024UL * 1024UL) - -static void __init pcpu_map_range(unsigned long start, unsigned long end, - struct page *page) +static void __init pcpu_free_bootmem(void *ptr, size_t size) { - unsigned long pfn = page_to_pfn(page); - unsigned long pte_base; - - BUG_ON((pfn< end) - this_end = end; - - while (start < this_end) { - unsigned long paddr = pfn << PAGE_SHIFT; - - pte_val(*pte) = (paddr | pte_base); + free_bootmem(__pa(ptr), size); +} - start += PAGE_SIZE; - pte++; - pfn++; - } - } +static int pcpu_cpu_distance(unsigned int from, unsigned int to) +{ + if (cpu_to_node(from) == cpu_to_node(to)) + return LOCAL_DISTANCE; + else + return REMOTE_DISTANCE; } void __init setup_per_cpu_areas(void) { - static struct vm_struct vm; - struct pcpu_alloc_info *ai; - unsigned long delta, cpu; - size_t size_sum; - size_t ptrs_size; - void **ptrs; + unsigned long delta; + unsigned int cpu; int rc; - ai = pcpu_alloc_alloc_info(1, nr_cpu_ids); - - ai->static_size = __per_cpu_end - __per_cpu_start; - ai->reserved_size = PERCPU_MODULE_RESERVE; - - size_sum = PFN_ALIGN(ai->static_size + ai->reserved_size + - PERCPU_DYNAMIC_RESERVE); - - ai->dyn_size = size_sum - ai->static_size - ai->reserved_size; - ai->unit_size = PCPU_CHUNK_SIZE; - ai->atom_size = PCPU_CHUNK_SIZE; - ai->alloc_size = PCPU_CHUNK_SIZE; - ai->groups[0].nr_units = nr_cpu_ids; - - for_each_possible_cpu(cpu) - ai->groups[0].cpu_map[cpu] = cpu; - - ptrs_size = PFN_ALIGN(nr_cpu_ids * sizeof(ptrs[0])); - ptrs = alloc_bootmem(ptrs_size); - - for_each_possible_cpu(cpu) { - ptrs[cpu] = pcpu_alloc_bootmem(cpu, PCPU_CHUNK_SIZE, - PCPU_CHUNK_SIZE); - - free_bootmem(__pa(ptrs[cpu] + size_sum), - PCPU_CHUNK_SIZE - size_sum); - - memcpy(ptrs[cpu], __per_cpu_load, ai->static_size); - } - - /* allocate address and map */ - vm.flags = VM_ALLOC; - vm.size = nr_cpu_ids * PCPU_CHUNK_SIZE; - vm_area_register_early(&vm, PCPU_CHUNK_SIZE); - - for_each_possible_cpu(cpu) { - unsigned long start = (unsigned long) vm.addr; - unsigned long end; - - start += cpu * PCPU_CHUNK_SIZE; - end = start + PCPU_CHUNK_SIZE; - pcpu_map_range(start, end, virt_to_page(ptrs[cpu])); - } - - rc = pcpu_setup_first_chunk(ai, vm.addr); + rc = pcpu_embed_first_chunk(PERCPU_MODULE_RESERVE, + PERCPU_DYNAMIC_RESERVE, 4 << 20, + pcpu_cpu_distance, pcpu_alloc_bootmem, + pcpu_free_bootmem); if (rc) - panic("failed to setup percpu first chunk (%d)", rc); - - free_bootmem(__pa(ptrs), ptrs_size); + panic("failed to initialize first chunk (%d)", rc); delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start; for_each_possible_cpu(cpu) -- cgit v1.2.2 From c2a7e818019f20a5cf7fb26a6eb59e212e6c0cd8 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 14 Aug 2009 15:00:53 +0900 Subject: powerpc64: convert to dynamic percpu allocator Now that percpu allows arbitrary embedding of the first chunk, powerpc64 can easily be converted to dynamic percpu allocator. Convert it. powerpc supports several large page sizes. Cap atom_size at 1M. There isn't much to gain by going above that anyway. Signed-off-by: Tejun Heo Cc: Benjamin Herrenschmidt --- arch/powerpc/Kconfig | 4 +-- arch/powerpc/kernel/setup_64.c | 61 +++++++++++++++++++++++++++++++----------- 2 files changed, 47 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 61bbffa2fe60..2c42e1526d03 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -46,10 +46,10 @@ config GENERIC_HARDIRQS_NO__DO_IRQ bool default y -config HAVE_LEGACY_PER_CPU_AREA +config HAVE_SETUP_PER_CPU_AREA def_bool PPC64 -config HAVE_SETUP_PER_CPU_AREA +config NEED_PER_CPU_EMBED_FIRST_CHUNK def_bool PPC64 config IRQ_PER_CPU diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 1f6816003ebe..aa6e4500635f 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -57,6 +57,7 @@ #include #include #include +#include #include #include #include @@ -569,25 +570,53 @@ void cpu_die(void) } #ifdef CONFIG_SMP -void __init setup_per_cpu_areas(void) +#define PCPU_DYN_SIZE () + +static void * __init pcpu_fc_alloc(unsigned int cpu, size_t size, size_t align) { - int i; - unsigned long size; - char *ptr; - - /* Copy section for each CPU (we discard the original) */ - size = ALIGN(__per_cpu_end - __per_cpu_start, PAGE_SIZE); -#ifdef CONFIG_MODULES - if (size < PERCPU_ENOUGH_ROOM) - size = PERCPU_ENOUGH_ROOM; -#endif + return __alloc_bootmem_node(NODE_DATA(cpu_to_node(cpu)), size, align, + __pa(MAX_DMA_ADDRESS)); +} - for_each_possible_cpu(i) { - ptr = alloc_bootmem_pages_node(NODE_DATA(cpu_to_node(i)), size); +static void __init pcpu_fc_free(void *ptr, size_t size) +{ + free_bootmem(__pa(ptr), size); +} - paca[i].data_offset = ptr - __per_cpu_start; - memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start); - } +static int pcpu_cpu_distance(unsigned int from, unsigned int to) +{ + if (cpu_to_node(from) == cpu_to_node(to)) + return LOCAL_DISTANCE; + else + return REMOTE_DISTANCE; +} + +void __init setup_per_cpu_areas(void) +{ + const size_t dyn_size = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE; + size_t atom_size; + unsigned long delta; + unsigned int cpu; + int rc; + + /* + * Linear mapping is one of 4K, 1M and 16M. For 4K, no need + * to group units. For larger mappings, use 1M atom which + * should be large enough to contain a number of units. + */ + if (mmu_linear_psize == MMU_PAGE_4K) + atom_size = PAGE_SIZE; + else + atom_size = 1 << 20; + + rc = pcpu_embed_first_chunk(0, dyn_size, atom_size, pcpu_cpu_distance, + pcpu_fc_alloc, pcpu_fc_free); + if (rc < 0) + panic("cannot initialize percpu area (err=%d)", rc); + + delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start; + for_each_possible_cpu(cpu) + paca[cpu].data_offset = delta + pcpu_unit_offsets[cpu]; } #endif -- cgit v1.2.2