From aab42ed51b7d4a6e63dbd6a78924f216860254e8 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 12 Jul 2011 01:25:54 +0000 Subject: powerpc/44x: Use correct phy-address dt nodes on taishan.dts Taishan (440GX) has the first PHY (EMAC2) mapped at PHY address 1 and the 2nd PHY (EMAC3) at PHY address 3. Use "phy-address" to correctly describe this instead of "phy-map". Signed-off-by: Stefan Roese Cc: Josh Boyer Signed-off-by: Josh Boyer --- arch/powerpc/boot/dts/taishan.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/taishan.dts b/arch/powerpc/boot/dts/taishan.dts index 058438f9629b..1657ad0bf8a6 100644 --- a/arch/powerpc/boot/dts/taishan.dts +++ b/arch/powerpc/boot/dts/taishan.dts @@ -337,7 +337,7 @@ rx-fifo-size = <4096>; tx-fifo-size = <2048>; phy-mode = "rgmii"; - phy-map = <0x00000001>; + phy-address = <1>; rgmii-device = <&RGMII0>; rgmii-channel = <0>; zmii-device = <&ZMII0>; @@ -361,7 +361,7 @@ rx-fifo-size = <4096>; tx-fifo-size = <2048>; phy-mode = "rgmii"; - phy-map = <0x00000003>; + phy-address = <3>; rgmii-device = <&RGMII0>; rgmii-channel = <1>; zmii-device = <&ZMII0>; -- cgit v1.2.2