From af36bef0c5bb82f361ebb2f106f11d0f63dac887 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 10 Nov 2005 11:40:53 +0000 Subject: [ARM] Fix csumpartial corner case Ji-In Park discovered a bug in csumpartial which caused wrong checksums with misaligned buffers. Signed-off-by: Russell King --- arch/arm/lib/csumpartial.S | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/lib/csumpartial.S b/arch/arm/lib/csumpartial.S index cb5e3708f118..fe797cf320bb 100644 --- a/arch/arm/lib/csumpartial.S +++ b/arch/arm/lib/csumpartial.S @@ -39,6 +39,7 @@ td3 .req lr /* we must have at least one byte. */ tst buf, #1 @ odd address? + movne sum, sum, ror #8 ldrneb td0, [buf], #1 subne len, len, #1 adcnes sum, sum, td0, put_byte_1 @@ -103,6 +104,9 @@ ENTRY(csum_partial) cmp len, #8 @ Ensure that we have at least blo .less8 @ 8 bytes to copy. + tst buf, #1 + movne sum, sum, ror #8 + adds sum, sum, #0 @ C = 0 tst buf, #3 @ Test destination alignment blne .not_aligned @ aligh destination, return here -- cgit v1.2.2 From a7918f39bbe59fe76f43743bdb6bb8b0bdefd94a Mon Sep 17 00:00:00 2001 From: Alessandro Zummo Date: Thu, 10 Nov 2005 14:05:04 +0000 Subject: [ARM] 3140/1: NSLU2 machine support Patch from Alessandro Zummo This patch adds support for the LinkSys NSLU2 running with both big and little-endian kernels. The LinkSys NSLU2 is a cost engineered ARM, XScale 420 based system similar to the the Intel IXDP425 evaluation board. It uses the IXP4XX ARCH. While this patch applies independently of other patches the resultant kernel requires further patches to successfully use onboard devices, including the onboard flash. Since these patches are independent of this one they will be submitted separately. A defconfig is not included here because not all of the required drivers are actually in the kernel. We intend to provide one as soon as the patches will be incorporated in mainstream. This patch is the combined work of nslu2-linux.org Signed-off-by: John Bowler Signed-off-by: Alessandro Zummo Signed-off-by: Deepak Saxena Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- arch/arm/mach-ixp4xx/Kconfig | 10 +++ arch/arm/mach-ixp4xx/Makefile | 1 + arch/arm/mach-ixp4xx/nslu2-pci.c | 77 +++++++++++++++++++++ arch/arm/mach-ixp4xx/nslu2-power.c | 92 +++++++++++++++++++++++++ arch/arm/mach-ixp4xx/nslu2-setup.c | 134 +++++++++++++++++++++++++++++++++++++ 5 files changed, 314 insertions(+) create mode 100644 arch/arm/mach-ixp4xx/nslu2-pci.c create mode 100644 arch/arm/mach-ixp4xx/nslu2-power.c create mode 100644 arch/arm/mach-ixp4xx/nslu2-setup.c (limited to 'arch') diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index 89762a26495c..385285851cb5 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -8,6 +8,16 @@ menu "Intel IXP4xx Implementation Options" comment "IXP4xx Platforms" +# This entry is placed on top because otherwise it would have +# been shown as a submenu. +config MACH_NSLU2 + bool + prompt "NSLU2" if !(MACH_IXDP465 || MACH_IXDPG425 || ARCH_IXDP425 || ARCH_ADI_COYOTE || ARCH_AVILA || ARCH_IXCDP1100 || ARCH_PRPMC1100 || MACH_GTWX5715) + help + Say 'Y' here if you want your kernel to support Linksys's + NSLU2 NAS device. For more information on this platform, + see http://www.nslu2-linux.org + config ARCH_AVILA bool "Avila" help diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile index ddecbda4a633..7a15629c18d0 100644 --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile @@ -8,4 +8,5 @@ obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pci.o ixdp425-setup.o obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o +obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o diff --git a/arch/arm/mach-ixp4xx/nslu2-pci.c b/arch/arm/mach-ixp4xx/nslu2-pci.c new file mode 100644 index 000000000000..a575f2e0b2c8 --- /dev/null +++ b/arch/arm/mach-ixp4xx/nslu2-pci.c @@ -0,0 +1,77 @@ +/* + * arch/arm/mach-ixp4xx/nslu2-pci.c + * + * NSLU2 board-level PCI initialization + * + * based on ixdp425-pci.c: + * Copyright (C) 2002 Intel Corporation. + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * Maintainer: http://www.nslu2-linux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include + +#include +#include + +void __init nslu2_pci_preinit(void) +{ + set_irq_type(IRQ_NSLU2_PCI_INTA, IRQT_LOW); + set_irq_type(IRQ_NSLU2_PCI_INTB, IRQT_LOW); + set_irq_type(IRQ_NSLU2_PCI_INTC, IRQT_LOW); + + gpio_line_isr_clear(NSLU2_PCI_INTA_PIN); + gpio_line_isr_clear(NSLU2_PCI_INTB_PIN); + gpio_line_isr_clear(NSLU2_PCI_INTC_PIN); + + /* INTD is not configured as GPIO is used + * for the power input button. + */ + + ixp4xx_pci_preinit(); +} + +static int __init nslu2_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + static int pci_irq_table[NSLU2_PCI_IRQ_LINES] = { + IRQ_NSLU2_PCI_INTA, + IRQ_NSLU2_PCI_INTB, + IRQ_NSLU2_PCI_INTC, + }; + + int irq = -1; + + if (slot >= 1 && slot <= NSLU2_PCI_MAX_DEV && + pin >= 1 && pin <= NSLU2_PCI_IRQ_LINES) { + irq = pci_irq_table[(slot + pin - 2) % NSLU2_PCI_IRQ_LINES]; + } + + return irq; +} + +struct hw_pci __initdata nslu2_pci = { + .nr_controllers = 1, + .preinit = nslu2_pci_preinit, + .swizzle = pci_std_swizzle, + .setup = ixp4xx_setup, + .scan = ixp4xx_scan_bus, + .map_irq = nslu2_map_irq, +}; + +int __init nslu2_pci_init(void) /* monkey see, monkey do */ +{ + if (machine_is_nslu2()) + pci_common_init(&nslu2_pci); + + return 0; +} + +subsys_initcall(nslu2_pci_init); diff --git a/arch/arm/mach-ixp4xx/nslu2-power.c b/arch/arm/mach-ixp4xx/nslu2-power.c new file mode 100644 index 000000000000..18fbc8c0fb30 --- /dev/null +++ b/arch/arm/mach-ixp4xx/nslu2-power.c @@ -0,0 +1,92 @@ +/* + * arch/arm/mach-ixp4xx/nslu2-power.c + * + * NSLU2 Power/Reset driver + * + * Copyright (C) 2005 Tower Technologies + * + * based on nslu2-io.c + * Copyright (C) 2004 Karen Spearel + * + * Author: Alessandro Zummo + * Maintainers: http://www.nslu2-linux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include + +#include + +extern void ctrl_alt_del(void); + +static irqreturn_t nslu2_power_handler(int irq, void *dev_id, struct pt_regs *regs) +{ + /* Signal init to do the ctrlaltdel action, this will bypass init if + * it hasn't started and do a kernel_restart. + */ + ctrl_alt_del(); + + return IRQ_HANDLED; +} + +static irqreturn_t nslu2_reset_handler(int irq, void *dev_id, struct pt_regs *regs) +{ + /* This is the paper-clip reset, it shuts the machine down directly. + */ + machine_power_off(); + + return IRQ_HANDLED; +} + +static int __init nslu2_power_init(void) +{ + if (!(machine_is_nslu2())) + return 0; + + *IXP4XX_GPIO_GPISR = 0x20400000; /* read the 2 irqs to clr */ + + set_irq_type(NSLU2_RB_IRQ, IRQT_LOW); + set_irq_type(NSLU2_PB_IRQ, IRQT_HIGH); + + gpio_line_isr_clear(NSLU2_RB_GPIO); + gpio_line_isr_clear(NSLU2_PB_GPIO); + + if (request_irq(NSLU2_RB_IRQ, &nslu2_reset_handler, + SA_INTERRUPT, "NSLU2 reset button", NULL) < 0) { + + printk(KERN_DEBUG "Reset Button IRQ %d not available\n", + NSLU2_RB_IRQ); + + return -EIO; + } + + if (request_irq(NSLU2_PB_IRQ, &nslu2_power_handler, + SA_INTERRUPT, "NSLU2 power button", NULL) < 0) { + + printk(KERN_DEBUG "Power Button IRQ %d not available\n", + NSLU2_PB_IRQ); + + return -EIO; + } + + return 0; +} + +static void __exit nslu2_power_exit(void) +{ + free_irq(NSLU2_RB_IRQ, NULL); + free_irq(NSLU2_PB_IRQ, NULL); +} + +module_init(nslu2_power_init); +module_exit(nslu2_power_exit); + +MODULE_AUTHOR("Alessandro Zummo "); +MODULE_DESCRIPTION("NSLU2 Power/Reset driver"); +MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c new file mode 100644 index 000000000000..289e94cb65c2 --- /dev/null +++ b/arch/arm/mach-ixp4xx/nslu2-setup.c @@ -0,0 +1,134 @@ +/* + * arch/arm/mach-ixp4xx/nslu2-setup.c + * + * NSLU2 board-setup + * + * based ixdp425-setup.c: + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * Author: Mark Rakes + * Maintainers: http://www.nslu2-linux.org/ + * + * Fixed missing init_time in MACHINE_START kas11 10/22/04 + * Changed to conform to new style __init ixdp425 kas11 10/22/04 + */ + +#include +#include +#include + +#include +#include +#include + +static struct flash_platform_data nslu2_flash_data = { + .map_name = "cfi_probe", + .width = 2, +}; + +static struct resource nslu2_flash_resource = { + .start = NSLU2_FLASH_BASE, + .end = NSLU2_FLASH_BASE + NSLU2_FLASH_SIZE, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device nslu2_flash = { + .name = "IXP4XX-Flash", + .id = 0, + .dev.platform_data = &nslu2_flash_data, + .num_resources = 1, + .resource = &nslu2_flash_resource, +}; + +static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = { + .sda_pin = NSLU2_SDA_PIN, + .scl_pin = NSLU2_SCL_PIN, +}; + +static struct platform_device nslu2_i2c_controller = { + .name = "IXP4XX-I2C", + .id = 0, + .dev.platform_data = &nslu2_i2c_gpio_pins, + .num_resources = 0, +}; + +static struct resource nslu2_uart_resources[] = { + { + .start = IXP4XX_UART1_BASE_PHYS, + .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + }, + { + .start = IXP4XX_UART2_BASE_PHYS, + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + } +}; + +static struct plat_serial8250_port nslu2_uart_data[] = { + { + .mapbase = IXP4XX_UART1_BASE_PHYS, + .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART1, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { } +}; + +static struct platform_device nslu2_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev.platform_data = nslu2_uart_data, + .num_resources = 2, + .resource = nslu2_uart_resources, +}; + +static struct platform_device *nslu2_devices[] __initdata = { + &nslu2_i2c_controller, + &nslu2_flash, + &nslu2_uart, +}; + +static void nslu2_power_off(void) +{ + /* This causes the box to drop the power and go dead. */ + + /* enable the pwr cntl gpio */ + gpio_line_config(NSLU2_PO_GPIO, IXP4XX_GPIO_OUT); + + /* do the deed */ + gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH); +} + +static void __init nslu2_init(void) +{ + ixp4xx_sys_init(); + + pm_power_off = nslu2_power_off; + + platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices)); +} + +MACHINE_START(NSLU2, "Linksys NSLU2") + /* Maintainer: www.nslu2-linux.org */ + .phys_ram = PHYS_OFFSET, + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC, + .boot_params = 0x00000100, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, + .init_machine = nslu2_init, +MACHINE_END -- cgit v1.2.2 From 3179a019391f0f8081245fd564a5f1be308ba64f Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 10 Nov 2005 14:26:48 +0000 Subject: [ARM] 3141/1: OMAP 1/5: Update omap1 specific files Patch from Tony Lindgren This patch syncs the mainline kernel with linux-omap tree. The highlights of the patch are: - Omap1 serial pport and framebuffer init updates by Imre Deak - Add support for omap310 processor and Palm Tungsten E PDA by Laurent Gonzales, Romain Goyet, et al. Omap310 and omap1510 processors are now handled as omap15xx. - Omap1 specific changes to shared omap clock framework by Tony Lindgren - Omap1 specific changes to shared omap pin mux framework by Tony Lindgren - Other misc fixes, such as update memory timings for smc91x, omap1 specific device initialization etc. Signed-off-by: Tony Lindgren Signed-off-by: Russell King --- arch/arm/mach-omap1/Kconfig | 32 +- arch/arm/mach-omap1/Makefile | 5 +- arch/arm/mach-omap1/board-generic.c | 33 +- arch/arm/mach-omap1/board-h2.c | 15 +- arch/arm/mach-omap1/board-h3.c | 19 +- arch/arm/mach-omap1/board-innovator.c | 42 +- arch/arm/mach-omap1/board-netstar.c | 15 +- arch/arm/mach-omap1/board-osk.c | 17 +- arch/arm/mach-omap1/board-palmte.c | 87 ++++ arch/arm/mach-omap1/board-perseus2.c | 23 +- arch/arm/mach-omap1/board-voiceblue.c | 9 +- arch/arm/mach-omap1/clock.c | 792 ++++++++++++++++++++++++++++++++++ arch/arm/mach-omap1/clock.h | 768 +++++++++++++++++++++++++++++++++ arch/arm/mach-omap1/devices.c | 221 +--------- arch/arm/mach-omap1/id.c | 9 + arch/arm/mach-omap1/io.c | 13 +- arch/arm/mach-omap1/irq.c | 23 +- arch/arm/mach-omap1/leds-h2p2-debug.c | 43 +- arch/arm/mach-omap1/leds.c | 1 - arch/arm/mach-omap1/mux.c | 289 +++++++++++++ arch/arm/mach-omap1/serial.c | 9 +- arch/arm/mach-omap1/time.c | 4 +- arch/arm/mm/Kconfig | 4 +- 23 files changed, 2157 insertions(+), 316 deletions(-) create mode 100644 arch/arm/mach-omap1/board-palmte.c create mode 100644 arch/arm/mach-omap1/clock.c create mode 100644 arch/arm/mach-omap1/clock.h create mode 100644 arch/arm/mach-omap1/mux.c (limited to 'arch') diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 27fc2e8e5fca..86a0f0d14345 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -6,10 +6,10 @@ config ARCH_OMAP730 bool "OMAP730 Based System" select ARCH_OMAP_OTG -config ARCH_OMAP1510 +config ARCH_OMAP15XX depends on ARCH_OMAP1 default y - bool "OMAP1510 Based System" + bool "OMAP15xx Based System" config ARCH_OMAP16XX depends on ARCH_OMAP1 @@ -21,7 +21,7 @@ comment "OMAP Board Type" config MACH_OMAP_INNOVATOR bool "TI Innovator" - depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX) + depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX) help TI OMAP 1510 or 1610 Innovator board support. Say Y here if you have such a board. @@ -64,20 +64,30 @@ config MACH_OMAP_PERSEUS2 config MACH_VOICEBLUE bool "Voiceblue" - depends on ARCH_OMAP1 && ARCH_OMAP1510 + depends on ARCH_OMAP1 && ARCH_OMAP15XX help Support for Voiceblue GSM/VoIP gateway. Say Y here if you have such a board. config MACH_NETSTAR bool "NetStar" - depends on ARCH_OMAP1 && ARCH_OMAP1510 + depends on ARCH_OMAP1 && ARCH_OMAP15XX help Support for NetStar PBX. Say Y here if you have such a board. +config MACH_OMAP_PALMTE + bool "Palm Tungsten E" + depends on ARCH_OMAP1 && ARCH_OMAP15XX + help + Support for the Palm Tungsten E PDA. Currently only the LCD panel + is supported. To boot the kernel, you'll need a PalmOS compatible + bootloader; check out http://palmtelinux.sourceforge.net for more + informations. + Say Y here if you have such a PDA, say NO otherwise. + config MACH_OMAP_GENERIC bool "Generic OMAP board" - depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX) + depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX) help Support for generic OMAP-1510, 1610 or 1710 board with no FPGA. Can be used as template for porting Linux to @@ -121,32 +131,32 @@ config OMAP_ARM_182MHZ config OMAP_ARM_168MHZ bool "OMAP ARM 168 MHz CPU" - depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730) + depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730) help Enable 168MHz clock for OMAP CPU. If unsure, say N. config OMAP_ARM_150MHZ bool "OMAP ARM 150 MHz CPU" - depends on ARCH_OMAP1 && ARCH_OMAP1510 + depends on ARCH_OMAP1 && ARCH_OMAP15XX help Enable 150MHz clock for OMAP CPU. If unsure, say N. config OMAP_ARM_120MHZ bool "OMAP ARM 120 MHz CPU" - depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730) + depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730) help Enable 120MHz clock for OMAP CPU. If unsure, say N. config OMAP_ARM_60MHZ bool "OMAP ARM 60 MHz CPU" - depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730) + depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730) default y help Enable 60MHz clock for OMAP CPU. If unsure, say Y. config OMAP_ARM_30MHZ bool "OMAP ARM 30 MHz CPU" - depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730) + depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730) help Enable 30MHz clock for OMAP CPU. If unsure, say N. diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 181a93deaaee..b0b00156faae 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := io.o id.o irq.o time.o serial.o devices.o +obj-y := io.o id.o clock.o irq.o time.o mux.o serial.o devices.o led-y := leds.o # Specific board support @@ -15,8 +15,9 @@ obj-$(CONFIG_MACH_OMAP_OSK) += board-osk.o obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o obj-$(CONFIG_MACH_VOICEBLUE) += board-voiceblue.o obj-$(CONFIG_MACH_NETSTAR) += board-netstar.o +obj-$(CONFIG_MACH_OMAP_PALMTE) += board-palmte.o -ifeq ($(CONFIG_ARCH_OMAP1510),y) +ifeq ($(CONFIG_ARCH_OMAP15XX),y) # Innovator-1510 FPGA obj-$(CONFIG_MACH_OMAP_INNOVATOR) += fpga.o endif diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index c209c7172a9a..4b292e93fbe2 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -15,7 +15,7 @@ #include #include -#include +#include #include #include @@ -28,8 +28,6 @@ #include #include -static int __initdata generic_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1}; - static void __init omap_generic_init_irq(void) { omap_init_irq(); @@ -37,7 +35,7 @@ static void __init omap_generic_init_irq(void) /* assume no Mini-AB port */ -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX static struct omap_usb_config generic1510_usb_config __initdata = { .register_host = 1, .register_dev = 1, @@ -76,21 +74,19 @@ static struct omap_mmc_config generic_mmc_config __initdata = { #endif +static struct omap_uart_config generic_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + static struct omap_board_config_kernel generic_config[] = { { OMAP_TAG_USB, NULL }, { OMAP_TAG_MMC, &generic_mmc_config }, + { OMAP_TAG_UART, &generic_uart_config }, }; static void __init omap_generic_init(void) { - const struct omap_uart_config *uart_conf; - - /* - * Make sure the serial ports are muxed on at this point. - * You have to mux them off in device drivers later on - * if not needed. - */ -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { generic_config[0].data = &generic1510_usb_config; } @@ -101,20 +97,9 @@ static void __init omap_generic_init(void) } #endif - uart_conf = omap_get_config(OMAP_TAG_UART, struct omap_uart_config); - if (uart_conf != NULL) { - unsigned int enabled_ports, i; - - enabled_ports = uart_conf->enabled_uarts; - for (i = 0; i < 3; i++) { - if (!(enabled_ports & (1 << i))) - generic_serial_ports[i] = 0; - } - } - omap_board_config = generic_config; omap_board_config_size = ARRAY_SIZE(generic_config); - omap_serial_init(generic_serial_ports); + omap_serial_init(); } static void __init omap_generic_map_io(void) diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 4ee6bd8a50b8..a07e2c9307fa 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -40,8 +40,6 @@ extern int omap_gpio_init(void); -static int __initdata h2_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1}; - static struct mtd_partition h2_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ { @@ -160,9 +158,20 @@ static struct omap_mmc_config h2_mmc_config __initdata = { }, }; +static struct omap_uart_config h2_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + +static struct omap_lcd_config h2_lcd_config __initdata = { + .panel_name = "h2", + .ctrl_name = "internal", +}; + static struct omap_board_config_kernel h2_config[] = { { OMAP_TAG_USB, &h2_usb_config }, { OMAP_TAG_MMC, &h2_mmc_config }, + { OMAP_TAG_UART, &h2_uart_config }, + { OMAP_TAG_LCD, &h2_lcd_config }, }; static void __init h2_init(void) @@ -180,12 +189,12 @@ static void __init h2_init(void) platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices)); omap_board_config = h2_config; omap_board_config_size = ARRAY_SIZE(h2_config); + omap_serial_init(); } static void __init h2_map_io(void) { omap_map_common_io(); - omap_serial_init(h2_serial_ports); } MACHINE_START(OMAP_H2, "TI-H2") diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index fc824361430d..668e278433c2 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -41,8 +41,6 @@ extern int omap_gpio_init(void); -static int __initdata h3_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1}; - static struct mtd_partition h3_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ { @@ -168,9 +166,20 @@ static struct omap_mmc_config h3_mmc_config __initdata = { }, }; +static struct omap_uart_config h3_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + +static struct omap_lcd_config h3_lcd_config __initdata = { + .panel_name = "h3", + .ctrl_name = "internal", +}; + static struct omap_board_config_kernel h3_config[] = { - { OMAP_TAG_USB, &h3_usb_config }, - { OMAP_TAG_MMC, &h3_mmc_config }, + { OMAP_TAG_USB, &h3_usb_config }, + { OMAP_TAG_MMC, &h3_mmc_config }, + { OMAP_TAG_UART, &h3_uart_config }, + { OMAP_TAG_LCD, &h3_lcd_config }, }; static void __init h3_init(void) @@ -180,6 +189,7 @@ static void __init h3_init(void) (void) platform_add_devices(devices, ARRAY_SIZE(devices)); omap_board_config = h3_config; omap_board_config_size = ARRAY_SIZE(h3_config); + omap_serial_init(); } static void __init h3_init_smc91x(void) @@ -201,7 +211,6 @@ void h3_init_irq(void) static void __init h3_map_io(void) { omap_map_common_io(); - omap_serial_init(h3_serial_ports); } MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index a2eac853b2da..95f1ff36cdcb 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -36,8 +36,6 @@ #include #include -static int __initdata innovator_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1}; - static struct mtd_partition innovator_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ { @@ -99,7 +97,7 @@ static struct platform_device innovator_flash_device = { .resource = &innovator_flash_resource, }; -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX /* Only FPGA needs to be mapped here. All others are done with ioremap */ static struct map_desc innovator1510_io_desc[] __initdata = { @@ -136,7 +134,7 @@ static struct platform_device *innovator1510_devices[] __initdata = { &innovator1510_smc91x_device, }; -#endif /* CONFIG_ARCH_OMAP1510 */ +#endif /* CONFIG_ARCH_OMAP15XX */ #ifdef CONFIG_ARCH_OMAP16XX @@ -185,7 +183,7 @@ void innovator_init_irq(void) { omap_init_irq(); omap_gpio_init(); -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { omap1510_fpga_init_irq(); } @@ -193,7 +191,7 @@ void innovator_init_irq(void) innovator_init_smc91x(); } -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX static struct omap_usb_config innovator1510_usb_config __initdata = { /* for bundled non-standard host and peripheral cables */ .hmc_mode = 4, @@ -205,6 +203,11 @@ static struct omap_usb_config innovator1510_usb_config __initdata = { .register_dev = 1, .pins[0] = 2, }; + +static struct omap_lcd_config innovator1510_lcd_config __initdata = { + .panel_name = "inn1510", + .ctrl_name = "internal", +}; #endif #ifdef CONFIG_ARCH_OMAP16XX @@ -222,6 +225,11 @@ static struct omap_usb_config h2_usb_config __initdata = { .pins[1] = 3, }; + +static struct omap_lcd_config innovator1610_lcd_config __initdata = { + .panel_name = "inn1610", + .ctrl_name = "internal", +}; #endif static struct omap_mmc_config innovator_mmc_config __initdata = { @@ -234,14 +242,20 @@ static struct omap_mmc_config innovator_mmc_config __initdata = { }, }; +static struct omap_uart_config innovator_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + static struct omap_board_config_kernel innovator_config[] = { { OMAP_TAG_USB, NULL }, + { OMAP_TAG_LCD, NULL }, { OMAP_TAG_MMC, &innovator_mmc_config }, + { OMAP_TAG_UART, &innovator_uart_config }, }; static void __init innovator_init(void) { -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices)); } @@ -252,23 +266,28 @@ static void __init innovator_init(void) } #endif -#ifdef CONFIG_ARCH_OMAP1510 - if (cpu_is_omap1510()) +#ifdef CONFIG_ARCH_OMAP15XX + if (cpu_is_omap1510()) { innovator_config[0].data = &innovator1510_usb_config; + innovator_config[1].data = &innovator1510_lcd_config; + } #endif #ifdef CONFIG_ARCH_OMAP16XX - if (cpu_is_omap1610()) + if (cpu_is_omap1610()) { innovator_config[0].data = &h2_usb_config; + innovator_config[1].data = &innovator1610_lcd_config; + } #endif omap_board_config = innovator_config; omap_board_config_size = ARRAY_SIZE(innovator_config); + omap_serial_init(); } static void __init innovator_map_io(void) { omap_map_common_io(); -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc)); udelay(10); /* Delay needed for FPGA */ @@ -280,7 +299,6 @@ static void __init innovator_map_io(void) fpga_read(OMAP1510_FPGA_BOARD_REV)); } #endif - omap_serial_init(innovator_serial_ports); } MACHINE_START(OMAP_INNOVATOR, "TI-Innovator") diff --git a/arch/arm/mach-omap1/board-netstar.c b/arch/arm/mach-omap1/board-netstar.c index c851c2e4dfcb..0448fa7de8a4 100644 --- a/arch/arm/mach-omap1/board-netstar.c +++ b/arch/arm/mach-omap1/board-netstar.c @@ -55,6 +55,14 @@ static struct platform_device *netstar_devices[] __initdata = { &netstar_smc91x_device, }; +static struct omap_uart_config netstar_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + +static struct omap_board_config_kernel netstar_config[] = { + { OMAP_TAG_UART, &netstar_uart_config }, +}; + static void __init netstar_init_irq(void) { omap_init_irq(); @@ -92,14 +100,15 @@ static void __init netstar_init(void) /* Switch off red LED */ omap_writeb(0x00, OMAP_LPG1_PMR); /* Disable clock */ omap_writeb(0x80, OMAP_LPG1_LCR); -} -static int __initdata omap_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1}; + omap_board_config = netstar_config; + omap_board_config_size = ARRAY_SIZE(netstar_config); + omap_serial_init(); +} static void __init netstar_map_io(void) { omap_map_common_io(); - omap_serial_init(omap_serial_ports); } #define MACHINE_PANICED 1 diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index a88524e7c315..e990e1bc1669 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -46,8 +46,6 @@ #include #include -static int __initdata osk_serial_ports[OMAP_MAX_NR_PORTS] = {1, 0, 0}; - static struct mtd_partition osk_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ { @@ -155,7 +153,7 @@ static void __init osk_init_smc91x(void) } /* Check EMIFS wait states to fix errors with SMC_GET_PKT_HDR */ - EMIFS_CCS(1) |= 0x2; + EMIFS_CCS(1) |= 0x3; } static void __init osk_init_cf(void) @@ -193,8 +191,19 @@ static struct omap_usb_config osk_usb_config __initdata = { .pins[0] = 2, }; +static struct omap_uart_config osk_uart_config __initdata = { + .enabled_uarts = (1 << 0), +}; + +static struct omap_lcd_config osk_lcd_config __initdata = { + .panel_name = "osk", + .ctrl_name = "internal", +}; + static struct omap_board_config_kernel osk_config[] = { { OMAP_TAG_USB, &osk_usb_config }, + { OMAP_TAG_UART, &osk_uart_config }, + { OMAP_TAG_LCD, &osk_lcd_config }, }; #ifdef CONFIG_OMAP_OSK_MISTRAL @@ -254,13 +263,13 @@ static void __init osk_init(void) omap_board_config_size = ARRAY_SIZE(osk_config); USB_TRANSCEIVER_CTRL_REG |= (3 << 1); + omap_serial_init(); osk_mistral_init(); } static void __init osk_map_io(void) { omap_map_common_io(); - omap_serial_init(osk_serial_ports); } MACHINE_START(OMAP_OSK, "TI-OSK") diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c new file mode 100644 index 000000000000..540b20d78cca --- /dev/null +++ b/arch/arm/mach-omap1/board-palmte.c @@ -0,0 +1,87 @@ +/* + * linux/arch/arm/mach-omap1/board-palmte.c + * + * Modified from board-generic.c + * + * Support for the Palm Tungsten E PDA. + * + * Original version : Laurent Gonzalez + * + * Maintainters : http://palmtelinux.sf.net + * palmtelinux-developpers@lists.sf.net + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +static void __init omap_generic_init_irq(void) +{ + omap_init_irq(); +} + +static struct omap_usb_config palmte_usb_config __initdata = { + .register_dev = 1, + .hmc_mode = 0, + .pins[0] = 3, +}; + +static struct omap_mmc_config palmte_mmc_config __initdata = { + .mmc [0] = { + .enabled = 1, + .wire4 = 1, + .wp_pin = OMAP_MPUIO(3), + .power_pin = -1, + .switch_pin = -1, + }, +}; + +static struct omap_lcd_config palmte_lcd_config __initdata = { + .panel_name = "palmte", + .ctrl_name = "internal", +}; + +static struct omap_board_config_kernel palmte_config[] = { + { OMAP_TAG_USB, &palmte_usb_config }, + { OMAP_TAG_MMC, &palmte_mmc_config }, + { OMAP_TAG_LCD, &palmte_lcd_config }, +}; + +static void __init omap_generic_init(void) +{ + omap_board_config = palmte_config; + omap_board_config_size = ARRAY_SIZE(palmte_config); +} + +static void __init omap_generic_map_io(void) +{ + omap_map_common_io(); +} + +MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E") + .phys_ram = 0x10000000, + .phys_io = 0xfff00000, + .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .map_io = omap_generic_map_io, + .init_irq = omap_generic_init_irq, + .init_machine = omap_generic_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 354b157acb3a..bd900b7ab33c 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -29,6 +29,7 @@ #include #include #include +#include static struct resource smc91x_resources[] = { [0] = { @@ -43,8 +44,6 @@ static struct resource smc91x_resources[] = { }, }; -static int __initdata p2_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 0}; - static struct mtd_partition p2_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ { @@ -111,9 +110,27 @@ static struct platform_device *devices[] __initdata = { &smc91x_device, }; +static struct omap_uart_config perseus2_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1)), +}; + +static struct omap_lcd_config perseus2_lcd_config __initdata = { + .panel_name = "p2", + .ctrl_name = "internal", +}; + +static struct omap_board_config_kernel perseus2_config[] = { + { OMAP_TAG_UART, &perseus2_uart_config }, + { OMAP_TAG_LCD, &perseus2_lcd_config }, +}; + static void __init omap_perseus2_init(void) { (void) platform_add_devices(devices, ARRAY_SIZE(devices)); + + omap_board_config = perseus2_config; + omap_board_config_size = ARRAY_SIZE(perseus2_config); + omap_serial_init(); } static void __init perseus2_init_smc91x(void) @@ -131,7 +148,6 @@ void omap_perseus2_init_irq(void) omap_gpio_init(); perseus2_init_smc91x(); } - /* Only FPGA needs to be mapped here. All others are done with ioremap */ static struct map_desc omap_perseus2_io_desc[] __initdata = { { @@ -179,7 +195,6 @@ static void __init omap_perseus2_map_io(void) * It is used as the Ethernet controller interrupt */ omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9); - omap_serial_init(p2_serial_ports); } MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2") diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 3f018b296861..6f9a6220e78a 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -150,9 +150,14 @@ static struct omap_mmc_config voiceblue_mmc_config __initdata = { }, }; +static struct omap_uart_config voiceblue_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + static struct omap_board_config_kernel voiceblue_config[] = { { OMAP_TAG_USB, &voiceblue_usb_config }, { OMAP_TAG_MMC, &voiceblue_mmc_config }, + { OMAP_TAG_UART, &voiceblue_uart_config }, }; static void __init voiceblue_init_irq(void) @@ -191,6 +196,7 @@ static void __init voiceblue_init(void) platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices)); omap_board_config = voiceblue_config; omap_board_config_size = ARRAY_SIZE(voiceblue_config); + omap_serial_init(); /* There is a good chance board is going up, so enable power LED * (it is connected through invertor) */ @@ -198,12 +204,9 @@ static void __init voiceblue_init(void) omap_writeb(0x00, OMAP_LPG1_PMR); /* Disable clock */ } -static int __initdata omap_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1}; - static void __init voiceblue_map_io(void) { omap_map_common_io(); - omap_serial_init(omap_serial_ports); } #define MACHINE_PANICED 1 diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c new file mode 100644 index 000000000000..4277eee44ed5 --- /dev/null +++ b/arch/arm/mach-omap1/clock.c @@ -0,0 +1,792 @@ +/* + * linux/arch/arm/mach-omap1/clock.c + * + * Copyright (C) 2004 - 2005 Nokia corporation + * Written by Tuukka Tikkanen + * + * Modified to use omap shared clock framework by + * Tony Lindgren + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include + +#include "clock.h" + +__u32 arm_idlect1_mask; + +/*------------------------------------------------------------------------- + * Omap1 specific clock functions + *-------------------------------------------------------------------------*/ + +static void omap1_watchdog_recalc(struct clk * clk) +{ + clk->rate = clk->parent->rate / 14; +} + +static void omap1_uart_recalc(struct clk * clk) +{ + unsigned int val = omap_readl(clk->enable_reg); + if (val & clk->enable_bit) + clk->rate = 48000000; + else + clk->rate = 12000000; +} + +static int omap1_clk_enable_dsp_domain(struct clk *clk) +{ + int retval; + + retval = omap1_clk_use(&api_ck.clk); + if (!retval) { + retval = omap1_clk_enable(clk); + omap1_clk_unuse(&api_ck.clk); + } + + return retval; +} + +static void omap1_clk_disable_dsp_domain(struct clk *clk) +{ + if (omap1_clk_use(&api_ck.clk) == 0) { + omap1_clk_disable(clk); + omap1_clk_unuse(&api_ck.clk); + } +} + +static int omap1_clk_enable_uart_functional(struct clk *clk) +{ + int ret; + struct uart_clk *uclk; + + ret = omap1_clk_enable(clk); + if (ret == 0) { + /* Set smart idle acknowledgement mode */ + uclk = (struct uart_clk *)clk; + omap_writeb((omap_readb(uclk->sysc_addr) & ~0x10) | 8, + uclk->sysc_addr); + } + + return ret; +} + +static void omap1_clk_disable_uart_functional(struct clk *clk) +{ + struct uart_clk *uclk; + + /* Set force idle acknowledgement mode */ + uclk = (struct uart_clk *)clk; + omap_writeb((omap_readb(uclk->sysc_addr) & ~0x18), uclk->sysc_addr); + + omap1_clk_disable(clk); +} + +static void omap1_clk_allow_idle(struct clk *clk) +{ + struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk; + + if (!(clk->flags & CLOCK_IDLE_CONTROL)) + return; + + if (iclk->no_idle_count > 0 && !(--iclk->no_idle_count)) + arm_idlect1_mask |= 1 << iclk->idlect_shift; +} + +static void omap1_clk_deny_idle(struct clk *clk) +{ + struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk; + + if (!(clk->flags & CLOCK_IDLE_CONTROL)) + return; + + if (iclk->no_idle_count++ == 0) + arm_idlect1_mask &= ~(1 << iclk->idlect_shift); +} + +static __u16 verify_ckctl_value(__u16 newval) +{ + /* This function checks for following limitations set + * by the hardware (all conditions must be true): + * DSPMMU_CK == DSP_CK or DSPMMU_CK == DSP_CK/2 + * ARM_CK >= TC_CK + * DSP_CK >= TC_CK + * DSPMMU_CK >= TC_CK + * + * In addition following rules are enforced: + * LCD_CK <= TC_CK + * ARMPER_CK <= TC_CK + * + * However, maximum frequencies are not checked for! + */ + __u8 per_exp; + __u8 lcd_exp; + __u8 arm_exp; + __u8 dsp_exp; + __u8 tc_exp; + __u8 dspmmu_exp; + + per_exp = (newval >> CKCTL_PERDIV_OFFSET) & 3; + lcd_exp = (newval >> CKCTL_LCDDIV_OFFSET) & 3; + arm_exp = (newval >> CKCTL_ARMDIV_OFFSET) & 3; + dsp_exp = (newval >> CKCTL_DSPDIV_OFFSET) & 3; + tc_exp = (newval >> CKCTL_TCDIV_OFFSET) & 3; + dspmmu_exp = (newval >> CKCTL_DSPMMUDIV_OFFSET) & 3; + + if (dspmmu_exp < dsp_exp) + dspmmu_exp = dsp_exp; + if (dspmmu_exp > dsp_exp+1) + dspmmu_exp = dsp_exp+1; + if (tc_exp < arm_exp) + tc_exp = arm_exp; + if (tc_exp < dspmmu_exp) + tc_exp = dspmmu_exp; + if (tc_exp > lcd_exp) + lcd_exp = tc_exp; + if (tc_exp > per_exp) + per_exp = tc_exp; + + newval &= 0xf000; + newval |= per_exp << CKCTL_PERDIV_OFFSET; + newval |= lcd_exp << CKCTL_LCDDIV_OFFSET; + newval |= arm_exp << CKCTL_ARMDIV_OFFSET; + newval |= dsp_exp << CKCTL_DSPDIV_OFFSET; + newval |= tc_exp << CKCTL_TCDIV_OFFSET; + newval |= dspmmu_exp << CKCTL_DSPMMUDIV_OFFSET; + + return newval; +} + +static int calc_dsor_exp(struct clk *clk, unsigned long rate) +{ + /* Note: If target frequency is too low, this function will return 4, + * which is invalid value. Caller must check for this value and act + * accordingly. + * + * Note: This function does not check for following limitations set + * by the hardware (all conditions must be true): + * DSPMMU_CK == DSP_CK or DSPMMU_CK == DSP_CK/2 + * ARM_CK >= TC_CK + * DSP_CK >= TC_CK + * DSPMMU_CK >= TC_CK + */ + unsigned long realrate; + struct clk * parent; + unsigned dsor_exp; + + if (unlikely(!(clk->flags & RATE_CKCTL))) + return -EINVAL; + + parent = clk->parent; + if (unlikely(parent == 0)) + return -EIO; + + realrate = parent->rate; + for (dsor_exp=0; dsor_exp<4; dsor_exp++) { + if (realrate <= rate) + break; + + realrate /= 2; + } + + return dsor_exp; +} + +static void omap1_ckctl_recalc(struct clk * clk) +{ + int dsor; + + /* Calculate divisor encoded as 2-bit exponent */ + dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset)); + + if (unlikely(clk->rate == clk->parent->rate / dsor)) + return; /* No change, quick exit */ + clk->rate = clk->parent->rate / dsor; + + if (unlikely(clk->flags & RATE_PROPAGATES)) + propagate_rate(clk); +} + +static void omap1_ckctl_recalc_dsp_domain(struct clk * clk) +{ + int dsor; + + /* Calculate divisor encoded as 2-bit exponent + * + * The clock control bits are in DSP domain, + * so api_ck is needed for access. + * Note that DSP_CKCTL virt addr = phys addr, so + * we must use __raw_readw() instead of omap_readw(). + */ + omap1_clk_use(&api_ck.clk); + dsor = 1 << (3 & (__raw_readw(DSP_CKCTL) >> clk->rate_offset)); + omap1_clk_unuse(&api_ck.clk); + + if (unlikely(clk->rate == clk->parent->rate / dsor)) + return; /* No change, quick exit */ + clk->rate = clk->parent->rate / dsor; + + if (unlikely(clk->flags & RATE_PROPAGATES)) + propagate_rate(clk); +} + +/* MPU virtual clock functions */ +static int omap1_select_table_rate(struct clk * clk, unsigned long rate) +{ + /* Find the highest supported frequency <= rate and switch to it */ + struct mpu_rate * ptr; + + if (clk != &virtual_ck_mpu) + return -EINVAL; + + for (ptr = rate_table; ptr->rate; ptr++) { + if (ptr->xtal != ck_ref.rate) + continue; + + /* DPLL1 cannot be reprogrammed without risking system crash */ + if (likely(ck_dpll1.rate!=0) && ptr->pll_rate != ck_dpll1.rate) + continue; + + /* Can check only after xtal frequency check */ + if (ptr->rate <= rate) + break; + } + + if (!ptr->rate) + return -EINVAL; + + /* + * In most cases we should not need to reprogram DPLL. + * Reprogramming the DPLL is tricky, it must be done from SRAM. + */ + omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val); + + ck_dpll1.rate = ptr->pll_rate; + propagate_rate(&ck_dpll1); + return 0; +} + +static int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate) +{ + int ret = -EINVAL; + int dsor_exp; + __u16 regval; + + if (clk->flags & RATE_CKCTL) { + dsor_exp = calc_dsor_exp(clk, rate); + if (dsor_exp > 3) + dsor_exp = -EINVAL; + if (dsor_exp < 0) + return dsor_exp; + + regval = __raw_readw(DSP_CKCTL); + regval &= ~(3 << clk->rate_offset); + regval |= dsor_exp << clk->rate_offset; + __raw_writew(regval, DSP_CKCTL); + clk->rate = clk->parent->rate / (1 << dsor_exp); + ret = 0; + } + + if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES))) + propagate_rate(clk); + + return ret; +} + +static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate) +{ + /* Find the highest supported frequency <= rate */ + struct mpu_rate * ptr; + long highest_rate; + + if (clk != &virtual_ck_mpu) + return -EINVAL; + + highest_rate = -EINVAL; + + for (ptr = rate_table; ptr->rate; ptr++) { + if (ptr->xtal != ck_ref.rate) + continue; + + highest_rate = ptr->rate; + + /* Can check only after xtal frequency check */ + if (ptr->rate <= rate) + break; + } + + return highest_rate; +} + +static unsigned calc_ext_dsor(unsigned long rate) +{ + unsigned dsor; + + /* MCLK and BCLK divisor selection is not linear: + * freq = 96MHz / dsor + * + * RATIO_SEL range: dsor <-> RATIO_SEL + * 0..6: (RATIO_SEL+2) <-> (dsor-2) + * 6..48: (8+(RATIO_SEL-6)*2) <-> ((dsor-8)/2+6) + * Minimum dsor is 2 and maximum is 96. Odd divisors starting from 9 + * can not be used. + */ + for (dsor = 2; dsor < 96; ++dsor) { + if ((dsor & 1) && dsor > 8) + continue; + if (rate >= 96000000 / dsor) + break; + } + return dsor; +} + +/* Only needed on 1510 */ +static int omap1_set_uart_rate(struct clk * clk, unsigned long rate) +{ + unsigned int val; + + val = omap_readl(clk->enable_reg); + if (rate == 12000000) + val &= ~(1 << clk->enable_bit); + else if (rate == 48000000) + val |= (1 << clk->enable_bit); + else + return -EINVAL; + omap_writel(val, clk->enable_reg); + clk->rate = rate; + + return 0; +} + +/* External clock (MCLK & BCLK) functions */ +static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate) +{ + unsigned dsor; + __u16 ratio_bits; + + dsor = calc_ext_dsor(rate); + clk->rate = 96000000 / dsor; + if (dsor > 8) + ratio_bits = ((dsor - 8) / 2 + 6) << 2; + else + ratio_bits = (dsor - 2) << 2; + + ratio_bits |= omap_readw(clk->enable_reg) & ~0xfd; + omap_writew(ratio_bits, clk->enable_reg); + + return 0; +} + +static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate) +{ + return 96000000 / calc_ext_dsor(rate); +} + +static void omap1_init_ext_clk(struct clk * clk) +{ + unsigned dsor; + __u16 ratio_bits; + + /* Determine current rate and ensure clock is based on 96MHz APLL */ + ratio_bits = omap_readw(clk->enable_reg) & ~1; + omap_writew(ratio_bits, clk->enable_reg); + + ratio_bits = (ratio_bits & 0xfc) >> 2; + if (ratio_bits > 6) + dsor = (ratio_bits - 6) * 2 + 8; + else + dsor = ratio_bits + 2; + + clk-> rate = 96000000 / dsor; +} + +static int omap1_clk_use(struct clk *clk) +{ + int ret = 0; + if (clk->usecount++ == 0) { + if (likely(clk->parent)) { + ret = omap1_clk_use(clk->parent); + + if (unlikely(ret != 0)) { + clk->usecount--; + return ret; + } + + if (clk->flags & CLOCK_NO_IDLE_PARENT) + if (!cpu_is_omap24xx()) + omap1_clk_deny_idle(clk->parent); + } + + ret = clk->enable(clk); + + if (unlikely(ret != 0) && clk->parent) { + omap1_clk_unuse(clk->parent); + clk->usecount--; + } + } + + return ret; +} + +static void omap1_clk_unuse(struct clk *clk) +{ + if (clk->usecount > 0 && !(--clk->usecount)) { + clk->disable(clk); + if (likely(clk->parent)) { + omap1_clk_unuse(clk->parent); + if (clk->flags & CLOCK_NO_IDLE_PARENT) + if (!cpu_is_omap24xx()) + omap1_clk_allow_idle(clk->parent); + } + } +} + +static int omap1_clk_enable(struct clk *clk) +{ + __u16 regval16; + __u32 regval32; + + if (clk->flags & ALWAYS_ENABLED) + return 0; + + if (unlikely(clk->enable_reg == 0)) { + printk(KERN_ERR "clock.c: Enable for %s without enable code\n", + clk->name); + return 0; + } + + if (clk->flags & ENABLE_REG_32BIT) { + if (clk->flags & VIRTUAL_IO_ADDRESS) { + regval32 = __raw_readl(clk->enable_reg); + regval32 |= (1 << clk->enable_bit); + __raw_writel(regval32, clk->enable_reg); + } else { + regval32 = omap_readl(clk->enable_reg); + regval32 |= (1 << clk->enable_bit); + omap_writel(regval32, clk->enable_reg); + } + } else { + if (clk->flags & VIRTUAL_IO_ADDRESS) { + regval16 = __raw_readw(clk->enable_reg); + regval16 |= (1 << clk->enable_bit); + __raw_writew(regval16, clk->enable_reg); + } else { + regval16 = omap_readw(clk->enable_reg); + regval16 |= (1 << clk->enable_bit); + omap_writew(regval16, clk->enable_reg); + } + } + + return 0; +} + +static void omap1_clk_disable(struct clk *clk) +{ + __u16 regval16; + __u32 regval32; + + if (clk->enable_reg == 0) + return; + + if (clk->flags & ENABLE_REG_32BIT) { + if (clk->flags & VIRTUAL_IO_ADDRESS) { + regval32 = __raw_readl(clk->enable_reg); + regval32 &= ~(1 << clk->enable_bit); + __raw_writel(regval32, clk->enable_reg); + } else { + regval32 = omap_readl(clk->enable_reg); + regval32 &= ~(1 << clk->enable_bit); + omap_writel(regval32, clk->enable_reg); + } + } else { + if (clk->flags & VIRTUAL_IO_ADDRESS) { + regval16 = __raw_readw(clk->enable_reg); + regval16 &= ~(1 << clk->enable_bit); + __raw_writew(regval16, clk->enable_reg); + } else { + regval16 = omap_readw(clk->enable_reg); + regval16 &= ~(1 << clk->enable_bit); + omap_writew(regval16, clk->enable_reg); + } + } +} + +static long omap1_clk_round_rate(struct clk *clk, unsigned long rate) +{ + int dsor_exp; + + if (clk->flags & RATE_FIXED) + return clk->rate; + + if (clk->flags & RATE_CKCTL) { + dsor_exp = calc_dsor_exp(clk, rate); + if (dsor_exp < 0) + return dsor_exp; + if (dsor_exp > 3) + dsor_exp = 3; + return clk->parent->rate / (1 << dsor_exp); + } + + if(clk->round_rate != 0) + return clk->round_rate(clk, rate); + + return clk->rate; +} + +static int omap1_clk_set_rate(struct clk *clk, unsigned long rate) +{ + int ret = -EINVAL; + int dsor_exp; + __u16 regval; + + if (clk->set_rate) + ret = clk->set_rate(clk, rate); + else if (clk->flags & RATE_CKCTL) { + dsor_exp = calc_dsor_exp(clk, rate); + if (dsor_exp > 3) + dsor_exp = -EINVAL; + if (dsor_exp < 0) + return dsor_exp; + + regval = omap_readw(ARM_CKCTL); + regval &= ~(3 << clk->rate_offset); + regval |= dsor_exp << clk->rate_offset; + regval = verify_ckctl_value(regval); + omap_writew(regval, ARM_CKCTL); + clk->rate = clk->parent->rate / (1 << dsor_exp); + ret = 0; + } + + if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES))) + propagate_rate(clk); + + return ret; +} + +/*------------------------------------------------------------------------- + * Omap1 clock reset and init functions + *-------------------------------------------------------------------------*/ + +#ifdef CONFIG_OMAP_RESET_CLOCKS +/* + * Resets some clocks that may be left on from bootloader, + * but leaves serial clocks on. See also omap_late_clk_reset(). + */ +static inline void omap1_early_clk_reset(void) +{ + //omap_writel(0x3 << 29, MOD_CONF_CTRL_0); +} + +static int __init omap1_late_clk_reset(void) +{ + /* Turn off all unused clocks */ + struct clk *p; + __u32 regval32; + + /* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */ + regval32 = omap_readw(SOFT_REQ_REG) & (1 << 4); + omap_writew(regval32, SOFT_REQ_REG); + omap_writew(0, SOFT_REQ_REG2); + + list_for_each_entry(p, &clocks, node) { + if (p->usecount > 0 || (p->flags & ALWAYS_ENABLED) || + p->enable_reg == 0) + continue; + + /* Clocks in the DSP domain need api_ck. Just assume bootloader + * has not enabled any DSP clocks */ + if ((u32)p->enable_reg == DSP_IDLECT2) { + printk(KERN_INFO "Skipping reset check for DSP domain " + "clock \"%s\"\n", p->name); + continue; + } + + /* Is the clock already disabled? */ + if (p->flags & ENABLE_REG_32BIT) { + if (p->flags & VIRTUAL_IO_ADDRESS) + regval32 = __raw_readl(p->enable_reg); + else + regval32 = omap_readl(p->enable_reg); + } else { + if (p->flags & VIRTUAL_IO_ADDRESS) + regval32 = __raw_readw(p->enable_reg); + else + regval32 = omap_readw(p->enable_reg); + } + + if ((regval32 & (1 << p->enable_bit)) == 0) + continue; + + /* FIXME: This clock seems to be necessary but no-one + * has asked for its activation. */ + if (p == &tc2_ck // FIX: pm.c (SRAM), CCP, Camera + || p == &ck_dpll1out.clk // FIX: SoSSI, SSR + || p == &arm_gpio_ck // FIX: GPIO code for 1510 + ) { + printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n", + p->name); + continue; + } + + printk(KERN_INFO "Disabling unused clock \"%s\"... ", p->name); + p->disable(p); + printk(" done\n"); + } + + return 0; +} +late_initcall(omap1_late_clk_reset); + +#else +#define omap1_early_clk_reset() {} +#endif + +static struct clk_functions omap1_clk_functions = { + .clk_use = omap1_clk_use, + .clk_unuse = omap1_clk_unuse, + .clk_round_rate = omap1_clk_round_rate, + .clk_set_rate = omap1_clk_set_rate, +}; + +int __init omap1_clk_init(void) +{ + struct clk ** clkp; + const struct omap_clock_config *info; + int crystal_type = 0; /* Default 12 MHz */ + + omap1_early_clk_reset(); + clk_init(&omap1_clk_functions); + + /* By default all idlect1 clocks are allowed to idle */ + arm_idlect1_mask = ~0; + + for (clkp = onchip_clks; clkp < onchip_clks+ARRAY_SIZE(onchip_clks); clkp++) { + if (((*clkp)->flags &CLOCK_IN_OMAP1510) && cpu_is_omap1510()) { + clk_register(*clkp); + continue; + } + + if (((*clkp)->flags &CLOCK_IN_OMAP16XX) && cpu_is_omap16xx()) { + clk_register(*clkp); + continue; + } + + if (((*clkp)->flags &CLOCK_IN_OMAP730) && cpu_is_omap730()) { + clk_register(*clkp); + continue; + } + } + + info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config); + if (info != NULL) { + if (!cpu_is_omap1510()) + crystal_type = info->system_clock_type; + } + +#if defined(CONFIG_ARCH_OMAP730) + ck_ref.rate = 13000000; +#elif defined(CONFIG_ARCH_OMAP16XX) + if (crystal_type == 2) + ck_ref.rate = 19200000; +#endif + + printk("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n", + omap_readw(ARM_SYSST), omap_readw(DPLL_CTL), + omap_readw(ARM_CKCTL)); + + /* We want to be in syncronous scalable mode */ + omap_writew(0x1000, ARM_SYSST); + +#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER + /* Use values set by bootloader. Determine PLL rate and recalculate + * dependent clocks as if kernel had changed PLL or divisors. + */ + { + unsigned pll_ctl_val = omap_readw(DPLL_CTL); + + ck_dpll1.rate = ck_ref.rate; /* Base xtal rate */ + if (pll_ctl_val & 0x10) { + /* PLL enabled, apply multiplier and divisor */ + if (pll_ctl_val & 0xf80) + ck_dpll1.rate *= (pll_ctl_val & 0xf80) >> 7; + ck_dpll1.rate /= ((pll_ctl_val & 0x60) >> 5) + 1; + } else { + /* PLL disabled, apply bypass divisor */ + switch (pll_ctl_val & 0xc) { + case 0: + break; + case 0x4: + ck_dpll1.rate /= 2; + break; + default: + ck_dpll1.rate /= 4; + break; + } + } + } + propagate_rate(&ck_dpll1); +#else + /* Find the highest supported frequency and enable it */ + if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) { + printk(KERN_ERR "System frequencies not set. Check your config.\n"); + /* Guess sane values (60MHz) */ + omap_writew(0x2290, DPLL_CTL); + omap_writew(0x1005, ARM_CKCTL); + ck_dpll1.rate = 60000000; + propagate_rate(&ck_dpll1); + } +#endif + /* Cache rates for clocks connected to ck_ref (not dpll1) */ + propagate_rate(&ck_ref); + printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): " + "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n", + ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10, + ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10, + arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10); + +#ifdef CONFIG_MACH_OMAP_PERSEUS2 + /* Select slicer output as OMAP input clock */ + omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL); +#endif + + /* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */ + omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL); + + /* Put DSP/MPUI into reset until needed */ + omap_writew(0, ARM_RSTCT1); + omap_writew(1, ARM_RSTCT2); + omap_writew(0x400, ARM_IDLECT1); + + /* + * According to OMAP5910 Erratum SYS_DMA_1, bit DMACK_REQ (bit 8) + * of the ARM_IDLECT2 register must be set to zero. The power-on + * default value of this bit is one. + */ + omap_writew(0x0000, ARM_IDLECT2); /* Turn LCD clock off also */ + + /* + * Only enable those clocks we will need, let the drivers + * enable other clocks as necessary + */ + clk_use(&armper_ck.clk); + clk_use(&armxor_ck.clk); + clk_use(&armtim_ck.clk); /* This should be done by timer code */ + + if (cpu_is_omap1510()) + clk_enable(&arm_gpio_ck); + + return 0; +} + diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h new file mode 100644 index 000000000000..f3bdfb50e01a --- /dev/null +++ b/arch/arm/mach-omap1/clock.h @@ -0,0 +1,768 @@ +/* + * linux/arch/arm/mach-omap1/clock.h + * + * Copyright (C) 2004 - 2005 Nokia corporation + * Written by Tuukka Tikkanen + * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_OMAP1_CLOCK_H +#define __ARCH_ARM_MACH_OMAP1_CLOCK_H + +static int omap1_clk_enable(struct clk * clk); +static void omap1_clk_disable(struct clk * clk); +static void omap1_ckctl_recalc(struct clk * clk); +static void omap1_watchdog_recalc(struct clk * clk); +static void omap1_ckctl_recalc_dsp_domain(struct clk * clk); +static int omap1_clk_enable_dsp_domain(struct clk * clk); +static int omap1_clk_set_rate_dsp_domain(struct clk * clk, unsigned long rate); +static void omap1_clk_disable_dsp_domain(struct clk * clk); +static int omap1_set_uart_rate(struct clk * clk, unsigned long rate); +static void omap1_uart_recalc(struct clk * clk); +static int omap1_clk_enable_uart_functional(struct clk * clk); +static void omap1_clk_disable_uart_functional(struct clk * clk); +static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate); +static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate); +static void omap1_init_ext_clk(struct clk * clk); +static int omap1_select_table_rate(struct clk * clk, unsigned long rate); +static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate); +static int omap1_clk_use(struct clk *clk); +static void omap1_clk_unuse(struct clk *clk); + +struct mpu_rate { + unsigned long rate; + unsigned long xtal; + unsigned long pll_rate; + __u16 ckctl_val; + __u16 dpllctl_val; +}; + +struct uart_clk { + struct clk clk; + unsigned long sysc_addr; +}; + +/* Provide a method for preventing idling some ARM IDLECT clocks */ +struct arm_idlect1_clk { + struct clk clk; + unsigned long no_idle_count; + __u8 idlect_shift; +}; + +/* ARM_CKCTL bit shifts */ +#define CKCTL_PERDIV_OFFSET 0 +#define CKCTL_LCDDIV_OFFSET 2 +#define CKCTL_ARMDIV_OFFSET 4 +#define CKCTL_DSPDIV_OFFSET 6 +#define CKCTL_TCDIV_OFFSET 8 +#define CKCTL_DSPMMUDIV_OFFSET 10 +/*#define ARM_TIMXO 12*/ +#define EN_DSPCK 13 +/*#define ARM_INTHCK_SEL 14*/ /* Divide-by-2 for mpu inth_ck */ +/* DSP_CKCTL bit shifts */ +#define CKCTL_DSPPERDIV_OFFSET 0 + +/* ARM_IDLECT2 bit shifts */ +#define EN_WDTCK 0 +#define EN_XORPCK 1 +#define EN_PERCK 2 +#define EN_LCDCK 3 +#define EN_LBCK 4 /* Not on 1610/1710 */ +/*#define EN_HSABCK 5*/ +#define EN_APICK 6 +#define EN_TIMCK 7 +#define DMACK_REQ 8 +#define EN_GPIOCK 9 /* Not on 1610/1710 */ +/*#define EN_LBFREECK 10*/ +#define EN_CKOUT_ARM 11 + +/* ARM_IDLECT3 bit shifts */ +#define EN_OCPI_CK 0 +#define EN_TC1_CK 2 +#define EN_TC2_CK 4 + +/* DSP_IDLECT2 bit shifts (0,1,2 are same as for ARM_IDLECT2) */ +#define EN_DSPTIMCK 5 + +/* Various register defines for clock controls scattered around OMAP chip */ +#define USB_MCLK_EN_BIT 4 /* In ULPD_CLKC_CTRL */ +#define USB_HOST_HHC_UHOST_EN 9 /* In MOD_CONF_CTRL_0 */ +#define SWD_ULPD_PLL_CLK_REQ 1 /* In SWD_CLK_DIV_CTRL_SEL */ +#define COM_ULPD_PLL_CLK_REQ 1 /* In COM_CLK_DIV_CTRL_SEL */ +#define SWD_CLK_DIV_CTRL_SEL 0xfffe0874 +#define COM_CLK_DIV_CTRL_SEL 0xfffe0878 +#define SOFT_REQ_REG 0xfffe0834 +#define SOFT_REQ_REG2 0xfffe0880 + +/*------------------------------------------------------------------------- + * Omap1 MPU rate table + *-------------------------------------------------------------------------*/ +static struct mpu_rate rate_table[] = { + /* MPU MHz, xtal MHz, dpll1 MHz, CKCTL, DPLL_CTL + * NOTE: Comment order here is different from bits in CKCTL value: + * armdiv, dspdiv, dspmmu, tcdiv, perdiv, lcddiv + */ +#if defined(CONFIG_OMAP_ARM_216MHZ) + { 216000000, 12000000, 216000000, 0x050d, 0x2910 }, /* 1/1/2/2/2/8 */ +#endif +#if defined(CONFIG_OMAP_ARM_195MHZ) + { 195000000, 13000000, 195000000, 0x050e, 0x2790 }, /* 1/1/2/2/4/8 */ +#endif +#if defined(CONFIG_OMAP_ARM_192MHZ) + { 192000000, 19200000, 192000000, 0x050f, 0x2510 }, /* 1/1/2/2/8/8 */ + { 192000000, 12000000, 192000000, 0x050f, 0x2810 }, /* 1/1/2/2/8/8 */ + { 96000000, 12000000, 192000000, 0x055f, 0x2810 }, /* 2/2/2/2/8/8 */ + { 48000000, 12000000, 192000000, 0x0baf, 0x2810 }, /* 4/4/4/8/8/8 */ + { 24000000, 12000000, 192000000, 0x0fff, 0x2810 }, /* 8/8/8/8/8/8 */ +#endif +#if defined(CONFIG_OMAP_ARM_182MHZ) + { 182000000, 13000000, 182000000, 0x050e, 0x2710 }, /* 1/1/2/2/4/8 */ +#endif +#if defined(CONFIG_OMAP_ARM_168MHZ) + { 168000000, 12000000, 168000000, 0x010f, 0x2710 }, /* 1/1/1/2/8/8 */ +#endif +#if defined(CONFIG_OMAP_ARM_150MHZ) + { 150000000, 12000000, 150000000, 0x010a, 0x2cb0 }, /* 1/1/1/2/4/4 */ +#endif +#if defined(CONFIG_OMAP_ARM_120MHZ) + { 120000000, 12000000, 120000000, 0x010a, 0x2510 }, /* 1/1/1/2/4/4 */ +#endif +#if defined(CONFIG_OMAP_ARM_96MHZ) + { 96000000, 12000000, 96000000, 0x0005, 0x2410 }, /* 1/1/1/1/2/2 */ +#endif +#if defined(CONFIG_OMAP_ARM_60MHZ) + { 60000000, 12000000, 60000000, 0x0005, 0x2290 }, /* 1/1/1/1/2/2 */ +#endif +#if defined(CONFIG_OMAP_ARM_30MHZ) + { 30000000, 12000000, 60000000, 0x0555, 0x2290 }, /* 2/2/2/2/2/2 */ +#endif + { 0, 0, 0, 0, 0 }, +}; + +/*------------------------------------------------------------------------- + * Omap1 clocks + *-------------------------------------------------------------------------*/ + +static struct clk ck_ref = { + .name = "ck_ref", + .rate = 12000000, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + ALWAYS_ENABLED, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk ck_dpll1 = { + .name = "ck_dpll1", + .parent = &ck_ref, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + RATE_PROPAGATES | ALWAYS_ENABLED, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct arm_idlect1_clk ck_dpll1out = { + .clk = { + .name = "ck_dpll1out", + .parent = &ck_dpll1, + .flags = CLOCK_IN_OMAP16XX | CLOCK_IDLE_CONTROL, + .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_bit = EN_CKOUT_ARM, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, + }, + .idlect_shift = 12, +}; + +static struct clk arm_ck = { + .name = "arm_ck", + .parent = &ck_dpll1, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + RATE_CKCTL | RATE_PROPAGATES | ALWAYS_ENABLED, + .rate_offset = CKCTL_ARMDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct arm_idlect1_clk armper_ck = { + .clk = { + .name = "armper_ck", + .parent = &ck_dpll1, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + RATE_CKCTL | CLOCK_IDLE_CONTROL, + .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_bit = EN_PERCK, + .rate_offset = CKCTL_PERDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, + }, + .idlect_shift = 2, +}; + +static struct clk arm_gpio_ck = { + .name = "arm_gpio_ck", + .parent = &ck_dpll1, + .flags = CLOCK_IN_OMAP1510, + .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_bit = EN_GPIOCK, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct arm_idlect1_clk armxor_ck = { + .clk = { + .name = "armxor_ck", + .parent = &ck_ref, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + CLOCK_IDLE_CONTROL, + .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_bit = EN_XORPCK, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, + }, + .idlect_shift = 1, +}; + +static struct arm_idlect1_clk armtim_ck = { + .clk = { + .name = "armtim_ck", + .parent = &ck_ref, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + CLOCK_IDLE_CONTROL, + .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_bit = EN_TIMCK, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, + }, + .idlect_shift = 9, +}; + +static struct arm_idlect1_clk armwdt_ck = { + .clk = { + .name = "armwdt_ck", + .parent = &ck_ref, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + CLOCK_IDLE_CONTROL, + .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_bit = EN_WDTCK, + .recalc = &omap1_watchdog_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, + }, + .idlect_shift = 0, +}; + +static struct clk arminth_ck16xx = { + .name = "arminth_ck", + .parent = &arm_ck, + .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, + .recalc = &followparent_recalc, + /* Note: On 16xx the frequency can be divided by 2 by programming + * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1 + * + * 1510 version is in TC clocks. + */ + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk dsp_ck = { + .name = "dsp_ck", + .parent = &ck_dpll1, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + RATE_CKCTL, + .enable_reg = (void __iomem *)ARM_CKCTL, + .enable_bit = EN_DSPCK, + .rate_offset = CKCTL_DSPDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk dspmmu_ck = { + .name = "dspmmu_ck", + .parent = &ck_dpll1, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + RATE_CKCTL | ALWAYS_ENABLED, + .rate_offset = CKCTL_DSPMMUDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk dspper_ck = { + .name = "dspper_ck", + .parent = &ck_dpll1, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + RATE_CKCTL | VIRTUAL_IO_ADDRESS, + .enable_reg = (void __iomem *)DSP_IDLECT2, + .enable_bit = EN_PERCK, + .rate_offset = CKCTL_PERDIV_OFFSET, + .recalc = &omap1_ckctl_recalc_dsp_domain, + .set_rate = &omap1_clk_set_rate_dsp_domain, + .enable = &omap1_clk_enable_dsp_domain, + .disable = &omap1_clk_disable_dsp_domain, +}; + +static struct clk dspxor_ck = { + .name = "dspxor_ck", + .parent = &ck_ref, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + VIRTUAL_IO_ADDRESS, + .enable_reg = (void __iomem *)DSP_IDLECT2, + .enable_bit = EN_XORPCK, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable_dsp_domain, + .disable = &omap1_clk_disable_dsp_domain, +}; + +static struct clk dsptim_ck = { + .name = "dsptim_ck", + .parent = &ck_ref, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + VIRTUAL_IO_ADDRESS, + .enable_reg = (void __iomem *)DSP_IDLECT2, + .enable_bit = EN_DSPTIMCK, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable_dsp_domain, + .disable = &omap1_clk_disable_dsp_domain, +}; + +/* Tie ARM_IDLECT1:IDLIF_ARM to this logical clock structure */ +static struct arm_idlect1_clk tc_ck = { + .clk = { + .name = "tc_ck", + .parent = &ck_dpll1, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + CLOCK_IN_OMAP730 | RATE_CKCTL | + RATE_PROPAGATES | ALWAYS_ENABLED | + CLOCK_IDLE_CONTROL, + .rate_offset = CKCTL_TCDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, + }, + .idlect_shift = 6, +}; + +static struct clk arminth_ck1510 = { + .name = "arminth_ck", + .parent = &tc_ck.clk, + .flags = CLOCK_IN_OMAP1510 | ALWAYS_ENABLED, + .recalc = &followparent_recalc, + /* Note: On 1510 the frequency follows TC_CK + * + * 16xx version is in MPU clocks. + */ + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk tipb_ck = { + /* No-idle controlled by "tc_ck" */ + .name = "tibp_ck", + .parent = &tc_ck.clk, + .flags = CLOCK_IN_OMAP1510 | ALWAYS_ENABLED, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk l3_ocpi_ck = { + /* No-idle controlled by "tc_ck" */ + .name = "l3_ocpi_ck", + .parent = &tc_ck.clk, + .flags = CLOCK_IN_OMAP16XX, + .enable_reg = (void __iomem *)ARM_IDLECT3, + .enable_bit = EN_OCPI_CK, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk tc1_ck = { + .name = "tc1_ck", + .parent = &tc_ck.clk, + .flags = CLOCK_IN_OMAP16XX, + .enable_reg = (void __iomem *)ARM_IDLECT3, + .enable_bit = EN_TC1_CK, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk tc2_ck = { + .name = "tc2_ck", + .parent = &tc_ck.clk, + .flags = CLOCK_IN_OMAP16XX, + .enable_reg = (void __iomem *)ARM_IDLECT3, + .enable_bit = EN_TC2_CK, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk dma_ck = { + /* No-idle controlled by "tc_ck" */ + .name = "dma_ck", + .parent = &tc_ck.clk, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + ALWAYS_ENABLED, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk dma_lcdfree_ck = { + .name = "dma_lcdfree_ck", + .parent = &tc_ck.clk, + .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct arm_idlect1_clk api_ck = { + .clk = { + .name = "api_ck", + .parent = &tc_ck.clk, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + CLOCK_IDLE_CONTROL, + .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_bit = EN_APICK, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, + }, + .idlect_shift = 8, +}; + +static struct arm_idlect1_clk lb_ck = { + .clk = { + .name = "lb_ck", + .parent = &tc_ck.clk, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IDLE_CONTROL, + .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_bit = EN_LBCK, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, + }, + .idlect_shift = 4, +}; + +static struct clk rhea1_ck = { + .name = "rhea1_ck", + .parent = &tc_ck.clk, + .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk rhea2_ck = { + .name = "rhea2_ck", + .parent = &tc_ck.clk, + .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk lcd_ck_16xx = { + .name = "lcd_ck", + .parent = &ck_dpll1, + .flags = CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP730 | RATE_CKCTL, + .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_bit = EN_LCDCK, + .rate_offset = CKCTL_LCDDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct arm_idlect1_clk lcd_ck_1510 = { + .clk = { + .name = "lcd_ck", + .parent = &ck_dpll1, + .flags = CLOCK_IN_OMAP1510 | RATE_CKCTL | + CLOCK_IDLE_CONTROL, + .enable_reg = (void __iomem *)ARM_IDLECT2, + .enable_bit = EN_LCDCK, + .rate_offset = CKCTL_LCDDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, + }, + .idlect_shift = 3, +}; + +static struct clk uart1_1510 = { + .name = "uart1_ck", + /* Direct from ULPD, no real parent */ + .parent = &armper_ck.clk, + .rate = 12000000, + .flags = CLOCK_IN_OMAP1510 | ENABLE_REG_32BIT | + ALWAYS_ENABLED | CLOCK_NO_IDLE_PARENT, + .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, + .enable_bit = 29, /* Chooses between 12MHz and 48MHz */ + .set_rate = &omap1_set_uart_rate, + .recalc = &omap1_uart_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct uart_clk uart1_16xx = { + .clk = { + .name = "uart1_ck", + /* Direct from ULPD, no real parent */ + .parent = &armper_ck.clk, + .rate = 48000000, + .flags = CLOCK_IN_OMAP16XX | RATE_FIXED | + ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, + .enable_bit = 29, + .enable = &omap1_clk_enable_uart_functional, + .disable = &omap1_clk_disable_uart_functional, + }, + .sysc_addr = 0xfffb0054, +}; + +static struct clk uart2_ck = { + .name = "uart2_ck", + /* Direct from ULPD, no real parent */ + .parent = &armper_ck.clk, + .rate = 12000000, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + ENABLE_REG_32BIT | ALWAYS_ENABLED | + CLOCK_NO_IDLE_PARENT, + .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, + .enable_bit = 30, /* Chooses between 12MHz and 48MHz */ + .set_rate = &omap1_set_uart_rate, + .recalc = &omap1_uart_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk uart3_1510 = { + .name = "uart3_ck", + /* Direct from ULPD, no real parent */ + .parent = &armper_ck.clk, + .rate = 12000000, + .flags = CLOCK_IN_OMAP1510 | ENABLE_REG_32BIT | + ALWAYS_ENABLED | CLOCK_NO_IDLE_PARENT, + .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, + .enable_bit = 31, /* Chooses between 12MHz and 48MHz */ + .set_rate = &omap1_set_uart_rate, + .recalc = &omap1_uart_recalc, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct uart_clk uart3_16xx = { + .clk = { + .name = "uart3_ck", + /* Direct from ULPD, no real parent */ + .parent = &armper_ck.clk, + .rate = 48000000, + .flags = CLOCK_IN_OMAP16XX | RATE_FIXED | + ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, + .enable_bit = 31, + .enable = &omap1_clk_enable_uart_functional, + .disable = &omap1_clk_disable_uart_functional, + }, + .sysc_addr = 0xfffb9854, +}; + +static struct clk usb_clko = { /* 6 MHz output on W4_USB_CLKO */ + .name = "usb_clko", + /* Direct from ULPD, no parent */ + .rate = 6000000, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + RATE_FIXED | ENABLE_REG_32BIT, + .enable_reg = (void __iomem *)ULPD_CLOCK_CTRL, + .enable_bit = USB_MCLK_EN_BIT, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk usb_hhc_ck1510 = { + .name = "usb_hhc_ck", + /* Direct from ULPD, no parent */ + .rate = 48000000, /* Actually 2 clocks, 12MHz and 48MHz */ + .flags = CLOCK_IN_OMAP1510 | + RATE_FIXED | ENABLE_REG_32BIT, + .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, + .enable_bit = USB_HOST_HHC_UHOST_EN, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk usb_hhc_ck16xx = { + .name = "usb_hhc_ck", + /* Direct from ULPD, no parent */ + .rate = 48000000, + /* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */ + .flags = CLOCK_IN_OMAP16XX | + RATE_FIXED | ENABLE_REG_32BIT, + .enable_reg = (void __iomem *)OTG_BASE + 0x08 /* OTG_SYSCON_2 */, + .enable_bit = 8 /* UHOST_EN */, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk usb_dc_ck = { + .name = "usb_dc_ck", + /* Direct from ULPD, no parent */ + .rate = 48000000, + .flags = CLOCK_IN_OMAP16XX | RATE_FIXED, + .enable_reg = (void __iomem *)SOFT_REQ_REG, + .enable_bit = 4, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk mclk_1510 = { + .name = "mclk", + /* Direct from ULPD, no parent. May be enabled by ext hardware. */ + .rate = 12000000, + .flags = CLOCK_IN_OMAP1510 | RATE_FIXED, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk mclk_16xx = { + .name = "mclk", + /* Direct from ULPD, no parent. May be enabled by ext hardware. */ + .flags = CLOCK_IN_OMAP16XX, + .enable_reg = (void __iomem *)COM_CLK_DIV_CTRL_SEL, + .enable_bit = COM_ULPD_PLL_CLK_REQ, + .set_rate = &omap1_set_ext_clk_rate, + .round_rate = &omap1_round_ext_clk_rate, + .init = &omap1_init_ext_clk, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk bclk_1510 = { + .name = "bclk", + /* Direct from ULPD, no parent. May be enabled by ext hardware. */ + .rate = 12000000, + .flags = CLOCK_IN_OMAP1510 | RATE_FIXED, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk bclk_16xx = { + .name = "bclk", + /* Direct from ULPD, no parent. May be enabled by ext hardware. */ + .flags = CLOCK_IN_OMAP16XX, + .enable_reg = (void __iomem *)SWD_CLK_DIV_CTRL_SEL, + .enable_bit = SWD_ULPD_PLL_CLK_REQ, + .set_rate = &omap1_set_ext_clk_rate, + .round_rate = &omap1_round_ext_clk_rate, + .init = &omap1_init_ext_clk, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk mmc1_ck = { + .name = "mmc1_ck", + /* Functional clock is direct from ULPD, interface clock is ARMPER */ + .parent = &armper_ck.clk, + .rate = 48000000, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, + .enable_bit = 23, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk mmc2_ck = { + .name = "mmc2_ck", + /* Functional clock is direct from ULPD, interface clock is ARMPER */ + .parent = &armper_ck.clk, + .rate = 48000000, + .flags = CLOCK_IN_OMAP16XX | + RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, + .enable_bit = 20, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk virtual_ck_mpu = { + .name = "mpu", + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + VIRTUAL_CLOCK | ALWAYS_ENABLED, + .parent = &arm_ck, /* Is smarter alias for */ + .recalc = &followparent_recalc, + .set_rate = &omap1_select_table_rate, + .round_rate = &omap1_round_to_table_rate, + .enable = &omap1_clk_enable, + .disable = &omap1_clk_disable, +}; + +static struct clk * onchip_clks[] = { + /* non-ULPD clocks */ + &ck_ref, + &ck_dpll1, + /* CK_GEN1 clocks */ + &ck_dpll1out.clk, + &arm_ck, + &armper_ck.clk, + &arm_gpio_ck, + &armxor_ck.clk, + &armtim_ck.clk, + &armwdt_ck.clk, + &arminth_ck1510, &arminth_ck16xx, + /* CK_GEN2 clocks */ + &dsp_ck, + &dspmmu_ck, + &dspper_ck, + &dspxor_ck, + &dsptim_ck, + /* CK_GEN3 clocks */ + &tc_ck.clk, + &tipb_ck, + &l3_ocpi_ck, + &tc1_ck, + &tc2_ck, + &dma_ck, + &dma_lcdfree_ck, + &api_ck.clk, + &lb_ck.clk, + &rhea1_ck, + &rhea2_ck, + &lcd_ck_16xx, + &lcd_ck_1510.clk, + /* ULPD clocks */ + &uart1_1510, + &uart1_16xx.clk, + &uart2_ck, + &uart3_1510, + &uart3_16xx.clk, + &usb_clko, + &usb_hhc_ck1510, &usb_hhc_ck16xx, + &usb_dc_ck, + &mclk_1510, &mclk_16xx, + &bclk_1510, &bclk_16xx, + &mmc1_ck, + &mmc2_ck, + /* Virtual clocks */ + &virtual_ck_mpu, +}; + +#endif diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 3c5d901efeaa..ecbc47514adc 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -25,56 +25,7 @@ #include #include - -static void omap_nop_release(struct device *dev) -{ - /* Nothing */ -} - -/*-------------------------------------------------------------------------*/ - -#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) - -#define OMAP_I2C_BASE 0xfffb3800 - -static struct resource i2c_resources[] = { - { - .start = OMAP_I2C_BASE, - .end = OMAP_I2C_BASE + 0x3f, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_I2C, - .flags = IORESOURCE_IRQ, - }, -}; - -/* DMA not used; works around erratum writing to non-empty i2c fifo */ - -static struct platform_device omap_i2c_device = { - .name = "i2c_omap", - .id = -1, - .dev = { - .release = omap_nop_release, - }, - .num_resources = ARRAY_SIZE(i2c_resources), - .resource = i2c_resources, -}; - -static void omap_init_i2c(void) -{ - /* FIXME define and use a boot tag, in case of boards that - * either don't wire up I2C, or chips that mux it differently... - * it can include clocking and address info, maybe more. - */ - omap_cfg_reg(I2C_SCL); - omap_cfg_reg(I2C_SDA); - - (void) platform_device_register(&omap_i2c_device); -} -#else -static inline void omap_init_i2c(void) {} -#endif +extern void omap_nop_release(struct device *dev); /*-------------------------------------------------------------------------*/ @@ -110,137 +61,6 @@ static inline void omap_init_irda(void) {} /*-------------------------------------------------------------------------*/ -#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) - -#define OMAP_MMC1_BASE 0xfffb7800 -#define OMAP_MMC2_BASE 0xfffb7c00 /* omap16xx only */ - -static struct omap_mmc_conf mmc1_conf; - -static u64 mmc1_dmamask = 0xffffffff; - -static struct resource mmc1_resources[] = { - { - .start = IO_ADDRESS(OMAP_MMC1_BASE), - .end = IO_ADDRESS(OMAP_MMC1_BASE) + 0x7f, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_MMC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mmc_omap_device1 = { - .name = "mmci-omap", - .id = 1, - .dev = { - .release = omap_nop_release, - .dma_mask = &mmc1_dmamask, - .platform_data = &mmc1_conf, - }, - .num_resources = ARRAY_SIZE(mmc1_resources), - .resource = mmc1_resources, -}; - -#ifdef CONFIG_ARCH_OMAP16XX - -static struct omap_mmc_conf mmc2_conf; - -static u64 mmc2_dmamask = 0xffffffff; - -static struct resource mmc2_resources[] = { - { - .start = IO_ADDRESS(OMAP_MMC2_BASE), - .end = IO_ADDRESS(OMAP_MMC2_BASE) + 0x7f, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_1610_MMC2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mmc_omap_device2 = { - .name = "mmci-omap", - .id = 2, - .dev = { - .release = omap_nop_release, - .dma_mask = &mmc2_dmamask, - .platform_data = &mmc2_conf, - }, - .num_resources = ARRAY_SIZE(mmc2_resources), - .resource = mmc2_resources, -}; -#endif - -static void __init omap_init_mmc(void) -{ - const struct omap_mmc_config *mmc_conf; - const struct omap_mmc_conf *mmc; - - /* NOTE: assumes MMC was never (wrongly) enabled */ - mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config); - if (!mmc_conf) - return; - - /* block 1 is always available and has just one pinout option */ - mmc = &mmc_conf->mmc[0]; - if (mmc->enabled) { - omap_cfg_reg(MMC_CMD); - omap_cfg_reg(MMC_CLK); - omap_cfg_reg(MMC_DAT0); - if (cpu_is_omap1710()) { - omap_cfg_reg(M15_1710_MMC_CLKI); - omap_cfg_reg(P19_1710_MMC_CMDDIR); - omap_cfg_reg(P20_1710_MMC_DATDIR0); - } - if (mmc->wire4) { - omap_cfg_reg(MMC_DAT1); - /* NOTE: DAT2 can be on W10 (here) or M15 */ - if (!mmc->nomux) - omap_cfg_reg(MMC_DAT2); - omap_cfg_reg(MMC_DAT3); - } - mmc1_conf = *mmc; - (void) platform_device_register(&mmc_omap_device1); - } - -#ifdef CONFIG_ARCH_OMAP16XX - /* block 2 is on newer chips, and has many pinout options */ - mmc = &mmc_conf->mmc[1]; - if (mmc->enabled) { - if (!mmc->nomux) { - omap_cfg_reg(Y8_1610_MMC2_CMD); - omap_cfg_reg(Y10_1610_MMC2_CLK); - omap_cfg_reg(R18_1610_MMC2_CLKIN); - omap_cfg_reg(W8_1610_MMC2_DAT0); - if (mmc->wire4) { - omap_cfg_reg(V8_1610_MMC2_DAT1); - omap_cfg_reg(W15_1610_MMC2_DAT2); - omap_cfg_reg(R10_1610_MMC2_DAT3); - } - - /* These are needed for the level shifter */ - omap_cfg_reg(V9_1610_MMC2_CMDDIR); - omap_cfg_reg(V5_1610_MMC2_DATDIR0); - omap_cfg_reg(W19_1610_MMC2_DATDIR1); - } - - /* Feedback clock must be set on OMAP-1710 MMC2 */ - if (cpu_is_omap1710()) - omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24), - MOD_CONF_CTRL_1); - mmc2_conf = *mmc; - (void) platform_device_register(&mmc_omap_device2); - } -#endif - return; -} -#else -static inline void omap_init_mmc(void) {} -#endif - #if defined(CONFIG_OMAP_RTC) || defined(CONFIG_OMAP_RTC) #define OMAP_RTC_BASE 0xfffb4800 @@ -279,38 +99,6 @@ static void omap_init_rtc(void) static inline void omap_init_rtc(void) {} #endif -/*-------------------------------------------------------------------------*/ - -#if defined(CONFIG_OMAP16XX_WATCHDOG) || defined(CONFIG_OMAP16XX_WATCHDOG_MODULE) - -#define OMAP_WDT_BASE 0xfffeb000 - -static struct resource wdt_resources[] = { - { - .start = OMAP_WDT_BASE, - .end = OMAP_WDT_BASE + 0x4f, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device omap_wdt_device = { - .name = "omap1610_wdt", - .id = -1, - .dev = { - .release = omap_nop_release, - }, - .num_resources = ARRAY_SIZE(wdt_resources), - .resource = wdt_resources, -}; - -static void omap_init_wdt(void) -{ - (void) platform_device_register(&omap_wdt_device); -} -#else -static inline void omap_init_wdt(void) {} -#endif - /*-------------------------------------------------------------------------*/ @@ -334,18 +122,15 @@ static inline void omap_init_wdt(void) {} * may be handled by the boot loader, and drivers should expect it will * normally have been done by the time they're probed. */ -static int __init omap_init_devices(void) +static int __init omap1_init_devices(void) { /* please keep these calls, and their implementations above, * in alphabetical order so they're easier to sort through. */ - omap_init_i2c(); omap_init_irda(); - omap_init_mmc(); omap_init_rtc(); - omap_init_wdt(); return 0; } -arch_initcall(omap_init_devices); +arch_initcall(omap1_init_devices); diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c index 986c3b7e09bb..5c637c048368 100644 --- a/arch/arm/mach-omap1/id.c +++ b/arch/arm/mach-omap1/id.c @@ -18,6 +18,13 @@ #include +#define OMAP_DIE_ID_0 0xfffe1800 +#define OMAP_DIE_ID_1 0xfffe1804 +#define OMAP_PRODUCTION_ID_0 0xfffe2000 +#define OMAP_PRODUCTION_ID_1 0xfffe2004 +#define OMAP32_ID_0 0xfffed400 +#define OMAP32_ID_1 0xfffed404 + struct omap_id { u16 jtag_id; /* Used to determine OMAP type */ u8 die_rev; /* Processor revision */ @@ -27,6 +34,7 @@ struct omap_id { /* Register values to detect the OMAP version */ static struct omap_id omap_ids[] __initdata = { + { .jtag_id = 0xb574, .die_rev = 0x2, .omap_id = 0x03310315, .type = 0x03100000}, { .jtag_id = 0x355f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300100}, { .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300300}, { .jtag_id = 0xb470, .die_rev = 0x0, .omap_id = 0x03310100, .type = 0x15100000}, @@ -164,6 +172,7 @@ void __init omap_check_revision(void) case 0x07: system_rev |= 0x07; break; + case 0x03: case 0x15: system_rev |= 0x15; break; diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 79fb86535ebc..a7a19f75b9e1 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -15,9 +15,10 @@ #include #include +#include #include -extern int clk_init(void); +extern int omap1_clk_init(void); extern void omap_check_revision(void); extern void omap_sram_init(void); @@ -50,7 +51,7 @@ static struct map_desc omap730_io_desc[] __initdata = { }; #endif -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX static struct map_desc omap1510_io_desc[] __initdata = { { .virtual = OMAP1510_DSP_BASE, @@ -98,7 +99,7 @@ static void __init _omap_map_io(void) iotable_init(omap730_io_desc, ARRAY_SIZE(omap730_io_desc)); } #endif -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc)); } @@ -119,7 +120,7 @@ static void __init _omap_map_io(void) /* Must init clocks early to assure that timer interrupt works */ - clk_init(); + omap1_clk_init(); } /* @@ -127,7 +128,9 @@ static void __init _omap_map_io(void) */ void __init omap_map_common_io(void) { - if (!initialized) + if (!initialized) { _omap_map_io(); + omap1_mux_init(); + } } diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index 192ce6055faa..ed65a7d2e941 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -47,6 +47,7 @@ #include #include #include +#include #include @@ -147,11 +148,15 @@ static struct omap_irq_bank omap730_irq_banks[] = { }; #endif -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX static struct omap_irq_bank omap1510_irq_banks[] = { { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3febfff }, { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xffbfffed }, }; +static struct omap_irq_bank omap310_irq_banks[] = { + { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3faefc3 }, + { .base_reg = OMAP_IH2_BASE, .trigger_map = 0x65b3c061 }, +}; #endif #if defined(CONFIG_ARCH_OMAP16XX) @@ -181,11 +186,15 @@ void __init omap_init_irq(void) irq_bank_count = ARRAY_SIZE(omap730_irq_banks); } #endif -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { irq_banks = omap1510_irq_banks; irq_bank_count = ARRAY_SIZE(omap1510_irq_banks); } + if (cpu_is_omap310()) { + irq_banks = omap310_irq_banks; + irq_bank_count = ARRAY_SIZE(omap310_irq_banks); + } #endif #if defined(CONFIG_ARCH_OMAP16XX) if (cpu_is_omap16xx()) { @@ -226,9 +235,11 @@ void __init omap_init_irq(void) } /* Unmask level 2 handler */ - if (cpu_is_omap730()) { + + if (cpu_is_omap730()) omap_unmask_irq(INT_730_IH2_IRQ); - } else { - omap_unmask_irq(INT_IH2_IRQ); - } + else if (cpu_is_omap1510()) + omap_unmask_irq(INT_1510_IH2_IRQ); + else if (cpu_is_omap16xx()) + omap_unmask_irq(INT_1610_IH2_IRQ); } diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c index 399010c14036..650650815915 100644 --- a/arch/arm/mach-omap1/leds-h2p2-debug.c +++ b/arch/arm/mach-omap1/leds-h2p2-debug.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include @@ -63,14 +64,19 @@ void h2p2_dbg_leds_event(led_event_t evt) case led_stop: case led_halted: /* all leds off during suspend or shutdown */ - omap_set_gpio_dataout(GPIO_TIMER, 0); - omap_set_gpio_dataout(GPIO_IDLE, 0); + + if (! machine_is_omap_perseus2()) { + omap_set_gpio_dataout(GPIO_TIMER, 0); + omap_set_gpio_dataout(GPIO_IDLE, 0); + } + __raw_writew(~0, &fpga->leds); led_state &= ~LED_STATE_ENABLED; if (evt == led_halted) { iounmap(fpga); fpga = NULL; } + goto done; case led_claim: @@ -85,18 +91,37 @@ void h2p2_dbg_leds_event(led_event_t evt) #ifdef CONFIG_LEDS_TIMER case led_timer: led_state ^= LED_TIMER_ON; - omap_set_gpio_dataout(GPIO_TIMER, led_state & LED_TIMER_ON); - goto done; + + if (machine_is_omap_perseus2()) + hw_led_state ^= H2P2_DBG_FPGA_P2_LED_TIMER; + else { + omap_set_gpio_dataout(GPIO_TIMER, led_state & LED_TIMER_ON); + goto done; + } + + break; #endif #ifdef CONFIG_LEDS_CPU case led_idle_start: - omap_set_gpio_dataout(GPIO_IDLE, 1); - goto done; + if (machine_is_omap_perseus2()) + hw_led_state |= H2P2_DBG_FPGA_P2_LED_IDLE; + else { + omap_set_gpio_dataout(GPIO_IDLE, 1); + goto done; + } + + break; case led_idle_end: - omap_set_gpio_dataout(GPIO_IDLE, 0); - goto done; + if (machine_is_omap_perseus2()) + hw_led_state &= ~H2P2_DBG_FPGA_P2_LED_IDLE; + else { + omap_set_gpio_dataout(GPIO_IDLE, 0); + goto done; + } + + break; #endif case led_green_on: @@ -135,7 +160,7 @@ void h2p2_dbg_leds_event(led_event_t evt) /* * Actually burn the LEDs */ - if (led_state & LED_STATE_CLAIMED) + if (led_state & LED_STATE_ENABLED) __raw_writew(~hw_led_state, &fpga->leds); done: diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c index 5c6b1bb6e722..3f9dcac4fd41 100644 --- a/arch/arm/mach-omap1/leds.c +++ b/arch/arm/mach-omap1/leds.c @@ -33,7 +33,6 @@ omap_leds_init(void) if (machine_is_omap_h2() || machine_is_omap_h3() - || machine_is_omap_perseus2() #ifdef CONFIG_OMAP_OSK_MISTRAL || machine_is_omap_osk() #endif diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c new file mode 100644 index 000000000000..d4b8d624e742 --- /dev/null +++ b/arch/arm/mach-omap1/mux.c @@ -0,0 +1,289 @@ +/* + * linux/arch/arm/mach-omap1/mux.c + * + * OMAP1 pin multiplexing configurations + * + * Copyright (C) 2003 - 2005 Nokia Corporation + * + * Written by Tony Lindgren + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#include +#include +#include +#include +#include +#include + +#include + +#ifdef CONFIG_OMAP_MUX + +#ifdef CONFIG_ARCH_OMAP730 +struct pin_config __initdata_or_module omap730_pins[] = { +MUX_CFG_730("E2_730_KBR0", 12, 21, 0, 0, 20, 1, NA, 0, 0) +MUX_CFG_730("J7_730_KBR1", 12, 25, 0, 0, 24, 1, NA, 0, 0) +MUX_CFG_730("E1_730_KBR2", 12, 29, 0, 0, 28, 1, NA, 0, 0) +MUX_CFG_730("F3_730_KBR3", 13, 1, 0, 0, 0, 1, NA, 0, 0) +MUX_CFG_730("D2_730_KBR4", 13, 5, 0, 0, 4, 1, NA, 0, 0) +MUX_CFG_730("C2_730_KBC0", 13, 9, 0, 0, 8, 1, NA, 0, 0) +MUX_CFG_730("D3_730_KBC1", 13, 13, 0, 0, 12, 1, NA, 0, 0) +MUX_CFG_730("E4_730_KBC2", 13, 17, 0, 0, 16, 1, NA, 0, 0) +MUX_CFG_730("F4_730_KBC3", 13, 21, 0, 0, 20, 1, NA, 0, 0) +MUX_CFG_730("E3_730_KBC4", 13, 25, 0, 0, 24, 1, NA, 0, 0) +}; +#endif + +#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) +struct pin_config __initdata_or_module omap1xxx_pins[] = { +/* + * description mux mode mux pull pull pull pu_pd pu dbg + * reg offset mode reg bit ena reg + */ +MUX_CFG("UART1_TX", 9, 21, 1, 2, 3, 0, NA, 0, 0) +MUX_CFG("UART1_RTS", 9, 12, 1, 2, 0, 0, NA, 0, 0) + +/* UART2 (COM_UART_GATING), conflicts with USB2 */ +MUX_CFG("UART2_TX", C, 27, 1, 3, 3, 0, NA, 0, 0) +MUX_CFG("UART2_RX", C, 18, 0, 3, 1, 1, NA, 0, 0) +MUX_CFG("UART2_CTS", C, 21, 0, 3, 1, 1, NA, 0, 0) +MUX_CFG("UART2_RTS", C, 24, 1, 3, 2, 0, NA, 0, 0) + +/* UART3 (GIGA_UART_GATING) */ +MUX_CFG("UART3_TX", 6, 0, 1, 0, 30, 0, NA, 0, 0) +MUX_CFG("UART3_RX", 6, 3, 0, 0, 31, 1, NA, 0, 0) +MUX_CFG("UART3_CTS", 5, 12, 2, 0, 24, 0, NA, 0, 0) +MUX_CFG("UART3_RTS", 5, 15, 2, 0, 25, 0, NA, 0, 0) +MUX_CFG("UART3_CLKREQ", 9, 27, 0, 2, 5, 0, NA, 0, 0) +MUX_CFG("UART3_BCLK", A, 0, 0, 2, 6, 0, NA, 0, 0) +MUX_CFG("Y15_1610_UART3_RTS", A, 0, 1, 2, 6, 0, NA, 0, 0) + +/* PWT & PWL, conflicts with UART3 */ +MUX_CFG("PWT", 6, 0, 2, 0, 30, 0, NA, 0, 0) +MUX_CFG("PWL", 6, 3, 1, 0, 31, 1, NA, 0, 0) + +/* USB internal master generic */ +MUX_CFG("R18_USB_VBUS", 7, 9, 2, 1, 11, 0, NA, 0, 1) +MUX_CFG("R18_1510_USB_GPIO0", 7, 9, 0, 1, 11, 1, NA, 0, 1) +/* works around erratum: W4_USB_PUEN and W4_USB_PUDIS are switched! */ +MUX_CFG("W4_USB_PUEN", D, 3, 3, 3, 5, 1, NA, 0, 1) +MUX_CFG("W4_USB_CLKO", D, 3, 1, 3, 5, 0, NA, 0, 1) +MUX_CFG("W4_USB_HIGHZ", D, 3, 4, 3, 5, 0, 3, 0, 1) +MUX_CFG("W4_GPIO58", D, 3, 7, 3, 5, 0, 3, 0, 1) + +/* USB1 master */ +MUX_CFG("USB1_SUSP", 8, 27, 2, 1, 27, 0, NA, 0, 1) +MUX_CFG("USB1_SE0", 9, 0, 2, 1, 28, 0, NA, 0, 1) +MUX_CFG("W13_1610_USB1_SE0", 9, 0, 4, 1, 28, 0, NA, 0, 1) +MUX_CFG("USB1_TXEN", 9, 3, 2, 1, 29, 0, NA, 0, 1) +MUX_CFG("USB1_TXD", 9, 24, 1, 2, 4, 0, NA, 0, 1) +MUX_CFG("USB1_VP", A, 3, 1, 2, 7, 0, NA, 0, 1) +MUX_CFG("USB1_VM", A, 6, 1, 2, 8, 0, NA, 0, 1) +MUX_CFG("USB1_RCV", A, 9, 1, 2, 9, 0, NA, 0, 1) +MUX_CFG("USB1_SPEED", A, 12, 2, 2, 10, 0, NA, 0, 1) +MUX_CFG("R13_1610_USB1_SPEED", A, 12, 5, 2, 10, 0, NA, 0, 1) +MUX_CFG("R13_1710_USB1_SEO", A, 12, 5, 2, 10, 0, NA, 0, 1) + +/* USB2 master */ +MUX_CFG("USB2_SUSP", B, 3, 1, 2, 17, 0, NA, 0, 1) +MUX_CFG("USB2_VP", B, 6, 1, 2, 18, 0, NA, 0, 1) +MUX_CFG("USB2_TXEN", B, 9, 1, 2, 19, 0, NA, 0, 1) +MUX_CFG("USB2_VM", C, 18, 1, 3, 0, 0, NA, 0, 1) +MUX_CFG("USB2_RCV", C, 21, 1, 3, 1, 0, NA, 0, 1) +MUX_CFG("USB2_SE0", C, 24, 2, 3, 2, 0, NA, 0, 1) +MUX_CFG("USB2_TXD", C, 27, 2, 3, 3, 0, NA, 0, 1) + +/* OMAP-1510 GPIO */ +MUX_CFG("R18_1510_GPIO0", 7, 9, 0, 1, 11, 1, 0, 0, 1) +MUX_CFG("R19_1510_GPIO1", 7, 6, 0, 1, 10, 1, 0, 0, 1) +MUX_CFG("M14_1510_GPIO2", 7, 3, 0, 1, 9, 1, 0, 0, 1) + +/* OMAP1610 GPIO */ +MUX_CFG("P18_1610_GPIO3", 7, 0, 0, 1, 8, 0, NA, 0, 1) +MUX_CFG("Y15_1610_GPIO17", A, 0, 7, 2, 6, 0, NA, 0, 1) + +/* OMAP-1710 GPIO */ +MUX_CFG("R18_1710_GPIO0", 7, 9, 0, 1, 11, 1, 1, 1, 1) +MUX_CFG("V2_1710_GPIO10", F, 27, 1, 4, 3, 1, 4, 1, 1) +MUX_CFG("N21_1710_GPIO14", 6, 9, 0, 1, 1, 1, 1, 1, 1) +MUX_CFG("W15_1710_GPIO40", 9, 27, 7, 2, 5, 1, 2, 1, 1) + +/* MPUIO */ +MUX_CFG("MPUIO2", 7, 18, 0, 1, 14, 1, NA, 0, 1) +MUX_CFG("N15_1610_MPUIO2", 7, 18, 0, 1, 14, 1, 1, 0, 1) +MUX_CFG("MPUIO4", 7, 15, 0, 1, 13, 1, NA, 0, 1) +MUX_CFG("MPUIO5", 7, 12, 0, 1, 12, 1, NA, 0, 1) + +MUX_CFG("T20_1610_MPUIO5", 7, 12, 0, 1, 12, 0, 3, 0, 1) +MUX_CFG("W11_1610_MPUIO6", 10, 15, 2, 3, 8, 0, 3, 0, 1) +MUX_CFG("V10_1610_MPUIO7", A, 24, 2, 2, 14, 0, 2, 0, 1) +MUX_CFG("W11_1610_MPUIO9", 10, 15, 1, 3, 8, 0, 3, 0, 1) +MUX_CFG("V10_1610_MPUIO10", A, 24, 1, 2, 14, 0, 2, 0, 1) +MUX_CFG("W10_1610_MPUIO11", A, 18, 2, 2, 11, 0, 2, 0, 1) +MUX_CFG("E20_1610_MPUIO13", 3, 21, 1, 0, 7, 0, 0, 0, 1) +MUX_CFG("U20_1610_MPUIO14", 9, 6, 6, 0, 30, 0, 0, 0, 1) +MUX_CFG("E19_1610_MPUIO15", 3, 18, 1, 0, 6, 0, 0, 0, 1) + +/* MCBSP2 */ +MUX_CFG("MCBSP2_CLKR", C, 6, 0, 2, 27, 1, NA, 0, 1) +MUX_CFG("MCBSP2_CLKX", C, 9, 0, 2, 29, 1, NA, 0, 1) +MUX_CFG("MCBSP2_DR", C, 0, 0, 2, 26, 1, NA, 0, 1) +MUX_CFG("MCBSP2_DX", C, 15, 0, 2, 31, 1, NA, 0, 1) +MUX_CFG("MCBSP2_FSR", C, 12, 0, 2, 30, 1, NA, 0, 1) +MUX_CFG("MCBSP2_FSX", C, 3, 0, 2, 27, 1, NA, 0, 1) + +/* MCBSP3 NOTE: Mode must 1 for clock */ +MUX_CFG("MCBSP3_CLKX", 9, 3, 1, 1, 29, 0, NA, 0, 1) + +/* Misc ballouts */ +MUX_CFG("BALLOUT_V8_ARMIO3", B, 18, 0, 2, 25, 1, NA, 0, 1) +MUX_CFG("N20_HDQ", 6, 18, 1, 1, 4, 0, 1, 4, 0) + +/* OMAP-1610 MMC2 */ +MUX_CFG("W8_1610_MMC2_DAT0", B, 21, 6, 2, 23, 1, 2, 1, 1) +MUX_CFG("V8_1610_MMC2_DAT1", B, 27, 6, 2, 25, 1, 2, 1, 1) +MUX_CFG("W15_1610_MMC2_DAT2", 9, 12, 6, 2, 5, 1, 2, 1, 1) +MUX_CFG("R10_1610_MMC2_DAT3", B, 18, 6, 2, 22, 1, 2, 1, 1) +MUX_CFG("Y10_1610_MMC2_CLK", B, 3, 6, 2, 17, 0, 2, 0, 1) +MUX_CFG("Y8_1610_MMC2_CMD", B, 24, 6, 2, 24, 1, 2, 1, 1) +MUX_CFG("V9_1610_MMC2_CMDDIR", B, 12, 6, 2, 20, 0, 2, 1, 1) +MUX_CFG("V5_1610_MMC2_DATDIR0", B, 15, 6, 2, 21, 0, 2, 1, 1) +MUX_CFG("W19_1610_MMC2_DATDIR1", 8, 15, 6, 1, 23, 0, 1, 1, 1) +MUX_CFG("R18_1610_MMC2_CLKIN", 7, 9, 6, 1, 11, 0, 1, 11, 1) + +/* OMAP-1610 External Trace Interface */ +MUX_CFG("M19_1610_ETM_PSTAT0", 5, 27, 1, 0, 29, 0, 0, 0, 1) +MUX_CFG("L15_1610_ETM_PSTAT1", 5, 24, 1, 0, 28, 0, 0, 0, 1) +MUX_CFG("L18_1610_ETM_PSTAT2", 5, 21, 1, 0, 27, 0, 0, 0, 1) +MUX_CFG("L19_1610_ETM_D0", 5, 18, 1, 0, 26, 0, 0, 0, 1) +MUX_CFG("J19_1610_ETM_D6", 5, 0, 1, 0, 20, 0, 0, 0, 1) +MUX_CFG("J18_1610_ETM_D7", 5, 27, 1, 0, 19, 0, 0, 0, 1) + +/* OMAP16XX GPIO */ +MUX_CFG("P20_1610_GPIO4", 6, 27, 0, 1, 7, 0, 1, 1, 1) +MUX_CFG("V9_1610_GPIO7", B, 12, 1, 2, 20, 0, 2, 1, 1) +MUX_CFG("W8_1610_GPIO9", B, 21, 0, 2, 23, 0, 2, 1, 1) +MUX_CFG("N20_1610_GPIO11", 6, 18, 0, 1, 4, 0, 1, 1, 1) +MUX_CFG("N19_1610_GPIO13", 6, 12, 0, 1, 2, 0, 1, 1, 1) +MUX_CFG("P10_1610_GPIO22", C, 0, 7, 2, 26, 0, 2, 1, 1) +MUX_CFG("V5_1610_GPIO24", B, 15, 7, 2, 21, 0, 2, 1, 1) +MUX_CFG("AA20_1610_GPIO_41", 9, 9, 7, 1, 31, 0, 1, 1, 1) +MUX_CFG("W19_1610_GPIO48", 8, 15, 7, 1, 23, 1, 1, 0, 1) +MUX_CFG("M7_1610_GPIO62", 10, 0, 0, 4, 24, 0, 4, 0, 1) +MUX_CFG("V14_16XX_GPIO37", 9, 18, 7, 2, 2, 0, 2, 2, 0) +MUX_CFG("R9_16XX_GPIO18", C, 18, 7, 3, 0, 0, 3, 0, 0) +MUX_CFG("L14_16XX_GPIO49", 6, 3, 7, 0, 31, 0, 0, 31, 0) + +/* OMAP-1610 uWire */ +MUX_CFG("V19_1610_UWIRE_SCLK", 8, 6, 0, 1, 20, 0, 1, 1, 1) +MUX_CFG("U18_1610_UWIRE_SDI", 8, 0, 0, 1, 18, 0, 1, 1, 1) +MUX_CFG("W21_1610_UWIRE_SDO", 8, 3, 0, 1, 19, 0, 1, 1, 1) +MUX_CFG("N14_1610_UWIRE_CS0", 8, 9, 1, 1, 21, 0, 1, 1, 1) +MUX_CFG("P15_1610_UWIRE_CS3", 8, 12, 1, 1, 22, 0, 1, 1, 1) +MUX_CFG("N15_1610_UWIRE_CS1", 7, 18, 2, 1, 14, 0, NA, 0, 1) + +/* OMAP-1610 Flash */ +MUX_CFG("L3_1610_FLASH_CS2B_OE",10, 6, 1, NA, 0, 0, NA, 0, 1) +MUX_CFG("M8_1610_FLASH_CS2B_WE",10, 3, 1, NA, 0, 0, NA, 0, 1) + +/* First MMC interface, same on 1510, 1610 and 1710 */ +MUX_CFG("MMC_CMD", A, 27, 0, 2, 15, 1, 2, 1, 1) +MUX_CFG("MMC_DAT1", A, 24, 0, 2, 14, 1, 2, 1, 1) +MUX_CFG("MMC_DAT2", A, 18, 0, 2, 12, 1, 2, 1, 1) +MUX_CFG("MMC_DAT0", B, 0, 0, 2, 16, 1, 2, 1, 1) +MUX_CFG("MMC_CLK", A, 21, 0, NA, 0, 0, NA, 0, 1) +MUX_CFG("MMC_DAT3", 10, 15, 0, 3, 8, 1, 3, 1, 1) +MUX_CFG("M15_1710_MMC_CLKI", 6, 21, 2, 0, 0, 0, NA, 0, 1) +MUX_CFG("P19_1710_MMC_CMDDIR", 6, 24, 6, 0, 0, 0, NA, 0, 1) +MUX_CFG("P20_1710_MMC_DATDIR0", 6, 27, 5, 0, 0, 0, NA, 0, 1) + +/* OMAP-1610 USB0 alternate configuration */ +MUX_CFG("W9_USB0_TXEN", B, 9, 5, 2, 19, 0, 2, 0, 1) +MUX_CFG("AA9_USB0_VP", B, 6, 5, 2, 18, 0, 2, 0, 1) +MUX_CFG("Y5_USB0_RCV", C, 21, 5, 3, 1, 0, 1, 0, 1) +MUX_CFG("R9_USB0_VM", C, 18, 5, 3, 0, 0, 3, 0, 1) +MUX_CFG("V6_USB0_TXD", C, 27, 5, 3, 3, 0, 3, 0, 1) +MUX_CFG("W5_USB0_SE0", C, 24, 5, 3, 2, 0, 3, 0, 1) +MUX_CFG("V9_USB0_SPEED", B, 12, 5, 2, 20, 0, 2, 0, 1) +MUX_CFG("Y10_USB0_SUSP", B, 3, 5, 2, 17, 0, 2, 0, 1) + +/* USB2 interface */ +MUX_CFG("W9_USB2_TXEN", B, 9, 1, NA, 0, 0, NA, 0, 1) +MUX_CFG("AA9_USB2_VP", B, 6, 1, NA, 0, 0, NA, 0, 1) +MUX_CFG("Y5_USB2_RCV", C, 21, 1, NA, 0, 0, NA, 0, 1) +MUX_CFG("R9_USB2_VM", C, 18, 1, NA, 0, 0, NA, 0, 1) +MUX_CFG("V6_USB2_TXD", C, 27, 2, NA, 0, 0, NA, 0, 1) +MUX_CFG("W5_USB2_SE0", C, 24, 2, NA, 0, 0, NA, 0, 1) + +/* 16XX UART */ +MUX_CFG("R13_1610_UART1_TX", A, 12, 6, 2, 10, 0, 2, 10, 1) +MUX_CFG("V14_16XX_UART1_RX", 9, 18, 0, 2, 2, 0, 2, 2, 1) +MUX_CFG("R14_1610_UART1_CTS", 9, 15, 0, 2, 1, 0, 2, 1, 1) +MUX_CFG("AA15_1610_UART1_RTS", 9, 12, 1, 2, 0, 0, 2, 0, 1) +MUX_CFG("R9_16XX_UART2_RX", C, 18, 0, 3, 0, 0, 3, 0, 1) +MUX_CFG("L14_16XX_UART3_RX", 6, 3, 0, 0, 31, 0, 0, 31, 1) + +/* I2C interface */ +MUX_CFG("I2C_SCL", 7, 24, 0, NA, 0, 0, NA, 0, 0) +MUX_CFG("I2C_SDA", 7, 27, 0, NA, 0, 0, NA, 0, 0) + +/* Keypad */ +MUX_CFG("F18_1610_KBC0", 3, 15, 0, 0, 5, 1, 0, 0, 0) +MUX_CFG("D20_1610_KBC1", 3, 12, 0, 0, 4, 1, 0, 0, 0) +MUX_CFG("D19_1610_KBC2", 3, 9, 0, 0, 3, 1, 0, 0, 0) +MUX_CFG("E18_1610_KBC3", 3, 6, 0, 0, 2, 1, 0, 0, 0) +MUX_CFG("C21_1610_KBC4", 3, 3, 0, 0, 1, 1, 0, 0, 0) +MUX_CFG("G18_1610_KBR0", 4, 0, 0, 0, 10, 1, 0, 1, 0) +MUX_CFG("F19_1610_KBR1", 3, 27, 0, 0, 9, 1, 0, 1, 0) +MUX_CFG("H14_1610_KBR2", 3, 24, 0, 0, 8, 1, 0, 1, 0) +MUX_CFG("E20_1610_KBR3", 3, 21, 0, 0, 7, 1, 0, 1, 0) +MUX_CFG("E19_1610_KBR4", 3, 18, 0, 0, 6, 1, 0, 1, 0) +MUX_CFG("N19_1610_KBR5", 6, 12, 1, 1, 2, 1, 1, 1, 0) + +/* Power management */ +MUX_CFG("T20_1610_LOW_PWR", 7, 12, 1, NA, 0, 0, NA, 0, 0) + +/* MCLK Settings */ +MUX_CFG("V5_1710_MCLK_ON", B, 15, 0, NA, 0, 0, NA, 0, 0) +MUX_CFG("V5_1710_MCLK_OFF", B, 15, 6, NA, 0, 0, NA, 0, 0) +MUX_CFG("R10_1610_MCLK_ON", B, 18, 0, NA, 22, 0, NA, 1, 0) +MUX_CFG("R10_1610_MCLK_OFF", B, 18, 6, 2, 22, 1, 2, 1, 1) + +/* CompactFlash controller, conflicts with MMC1 */ +MUX_CFG("P11_1610_CF_CD2", A, 27, 3, 2, 15, 1, 2, 1, 1) +MUX_CFG("R11_1610_CF_IOIS16", B, 0, 3, 2, 16, 1, 2, 1, 1) +MUX_CFG("V10_1610_CF_IREQ", A, 24, 3, 2, 14, 0, 2, 0, 1) +MUX_CFG("W10_1610_CF_RESET", A, 18, 3, 2, 12, 1, 2, 1, 1) +MUX_CFG("W11_1610_CF_CD1", 10, 15, 3, 3, 8, 1, 3, 1, 1) +}; +#endif /* CONFIG_ARCH_OMAP15XX || CONFIG_ARCH_OMAP16XX */ + +int __init omap1_mux_init(void) +{ + +#ifdef CONFIG_ARCH_OMAP730 + omap_mux_register(omap730_pins, ARRAY_SIZE(omap730_pins)); +#endif + +#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) + omap_mux_register(omap1xxx_pins, ARRAY_SIZE(omap1xxx_pins)); +#endif + + return 0; +} + +#endif diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index 40c4f7c40e73..6810cfb84462 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -109,9 +109,10 @@ static struct platform_device serial_device = { * By default UART2 does not work on Innovator-1510 if you have * USB OHCI enabled. To use UART2, you must disable USB2 first. */ -void __init omap_serial_init(int ports[OMAP_MAX_NR_PORTS]) +void __init omap_serial_init(void) { int i; + const struct omap_uart_config *info; if (cpu_is_omap730()) { serial_platform_data[0].regshift = 0; @@ -126,10 +127,14 @@ void __init omap_serial_init(int ports[OMAP_MAX_NR_PORTS]) serial_platform_data[2].uartclk = OMAP1510_BASE_BAUD * 16; } + info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config); + if (info == NULL) + return; + for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { unsigned char reg; - if (ports[i] == 0) { + if (!((1 << i) & info->enabled_uarts)) { serial_platform_data[i].membase = NULL; serial_platform_data[i].mapbase = 0; continue; diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index 191a9b1ee9b7..cdbf4d7620c6 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -226,8 +226,8 @@ unsigned long long sched_clock(void) #ifdef CONFIG_OMAP_32K_TIMER -#ifdef CONFIG_ARCH_OMAP1510 -#error OMAP 32KHz timer does not currently work on 1510! +#ifdef CONFIG_ARCH_OMAP15XX +#error OMAP 32KHz timer does not currently work on 15XX! #endif /* diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index e3c14d6b4328..4e8d19318d22 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -102,8 +102,8 @@ config CPU_ARM922T # ARM925T config CPU_ARM925T bool "Support ARM925T processor" if ARCH_OMAP1 - depends on ARCH_OMAP1510 - default y if ARCH_OMAP1510 + depends on ARCH_OMAP15XX + default y if ARCH_OMAP15XX select CPU_32v4 select CPU_ABRT_EV4T select CPU_CACHE_V4WT -- cgit v1.2.2 From 1a8bfa1eb998af6e650ad26201f7cae9f2a2fdc8 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 10 Nov 2005 14:26:50 +0000 Subject: [ARM] 3142/1: OMAP 2/5: Update files common to omap1 and omap2 Patch from Tony Lindgren This patch syncs the mainline kernel with linux-omap tree. The highlights of the patch are: - Serial port and framebuffer init improvments by Imre Deak - Common omap pin mux framework by Tony Lindgren - Common omap clock framework by Tony Lindren Signed-off-by: Tony Lindgren Signed-off-by: Russell King --- arch/arm/plat-omap/Makefile | 2 +- arch/arm/plat-omap/clock.c | 1315 +++++------------------------------------- arch/arm/plat-omap/clock.h | 120 ---- arch/arm/plat-omap/common.c | 50 +- arch/arm/plat-omap/devices.c | 381 ++++++++++++ arch/arm/plat-omap/dma.c | 910 +++++++++++++++++++---------- arch/arm/plat-omap/gpio.c | 40 +- arch/arm/plat-omap/mcbsp.c | 22 +- arch/arm/plat-omap/mux.c | 65 ++- arch/arm/plat-omap/pm.c | 103 +++- arch/arm/plat-omap/sleep.S | 139 ++++- arch/arm/plat-omap/sram.c | 143 ++++- arch/arm/plat-omap/sram.h | 21 - arch/arm/plat-omap/usb.c | 11 +- 14 files changed, 1583 insertions(+), 1739 deletions(-) delete mode 100644 arch/arm/plat-omap/clock.h create mode 100644 arch/arm/plat-omap/devices.c delete mode 100644 arch/arm/plat-omap/sram.h (limited to 'arch') diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 7e144f9cad1c..9ccf1943fc94 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := common.o sram.o sram-fn.o clock.o dma.o mux.o gpio.o mcbsp.o usb.o +obj-y := common.o sram.o sram-fn.o clock.o devices.o dma.o mux.o gpio.o mcbsp.o usb.o obj-m := obj-n := obj- := diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index a020fe16428f..7ce39b986e23 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -1,15 +1,20 @@ /* * linux/arch/arm/plat-omap/clock.c * - * Copyright (C) 2004 Nokia corporation + * Copyright (C) 2004 - 2005 Nokia corporation * Written by Tuukka Tikkanen * + * Modified for omap shared clock framework by Tony Lindgren + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include +#include +#include #include +#include +#include #include #include #include @@ -18,562 +23,20 @@ #include #include #include -#include -#include -#include "clock.h" -#include "sram.h" +#include -static LIST_HEAD(clocks); +LIST_HEAD(clocks); static DECLARE_MUTEX(clocks_sem); -static DEFINE_SPINLOCK(clockfw_lock); -static void propagate_rate(struct clk * clk); -/* UART clock function */ -static int set_uart_rate(struct clk * clk, unsigned long rate); -/* External clock (MCLK & BCLK) functions */ -static int set_ext_clk_rate(struct clk * clk, unsigned long rate); -static long round_ext_clk_rate(struct clk * clk, unsigned long rate); -static void init_ext_clk(struct clk * clk); -/* MPU virtual clock functions */ -static int select_table_rate(struct clk * clk, unsigned long rate); -static long round_to_table_rate(struct clk * clk, unsigned long rate); -void clk_setdpll(__u16, __u16); - -static struct mpu_rate rate_table[] = { - /* MPU MHz, xtal MHz, dpll1 MHz, CKCTL, DPLL_CTL - * armdiv, dspdiv, dspmmu, tcdiv, perdiv, lcddiv - */ -#if defined(CONFIG_OMAP_ARM_216MHZ) - { 216000000, 12000000, 216000000, 0x050d, 0x2910 }, /* 1/1/2/2/2/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_195MHZ) - { 195000000, 13000000, 195000000, 0x050e, 0x2790 }, /* 1/1/2/2/4/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_192MHZ) - { 192000000, 19200000, 192000000, 0x050f, 0x2510 }, /* 1/1/2/2/8/8 */ - { 192000000, 12000000, 192000000, 0x050f, 0x2810 }, /* 1/1/2/2/8/8 */ - { 96000000, 12000000, 192000000, 0x055f, 0x2810 }, /* 2/2/2/2/8/8 */ - { 48000000, 12000000, 192000000, 0x0baf, 0x2810 }, /* 4/8/4/4/8/8 */ - { 24000000, 12000000, 192000000, 0x0fff, 0x2810 }, /* 8/8/8/8/8/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_182MHZ) - { 182000000, 13000000, 182000000, 0x050e, 0x2710 }, /* 1/1/2/2/4/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_168MHZ) - { 168000000, 12000000, 168000000, 0x010f, 0x2710 }, /* 1/1/1/2/8/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_150MHZ) - { 150000000, 12000000, 150000000, 0x010a, 0x2cb0 }, /* 1/1/1/2/4/4 */ -#endif -#if defined(CONFIG_OMAP_ARM_120MHZ) - { 120000000, 12000000, 120000000, 0x010a, 0x2510 }, /* 1/1/1/2/4/4 */ -#endif -#if defined(CONFIG_OMAP_ARM_96MHZ) - { 96000000, 12000000, 96000000, 0x0005, 0x2410 }, /* 1/1/1/1/2/2 */ -#endif -#if defined(CONFIG_OMAP_ARM_60MHZ) - { 60000000, 12000000, 60000000, 0x0005, 0x2290 }, /* 1/1/1/1/2/2 */ -#endif -#if defined(CONFIG_OMAP_ARM_30MHZ) - { 30000000, 12000000, 60000000, 0x0555, 0x2290 }, /* 2/2/2/2/2/2 */ -#endif - { 0, 0, 0, 0, 0 }, -}; - - -static void ckctl_recalc(struct clk * clk); -int __clk_enable(struct clk *clk); -void __clk_disable(struct clk *clk); -void __clk_unuse(struct clk *clk); -int __clk_use(struct clk *clk); - - -static void followparent_recalc(struct clk * clk) -{ - clk->rate = clk->parent->rate; -} - - -static void watchdog_recalc(struct clk * clk) -{ - clk->rate = clk->parent->rate / 14; -} - -static void uart_recalc(struct clk * clk) -{ - unsigned int val = omap_readl(clk->enable_reg); - if (val & clk->enable_bit) - clk->rate = 48000000; - else - clk->rate = 12000000; -} - -static struct clk ck_ref = { - .name = "ck_ref", - .rate = 12000000, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - ALWAYS_ENABLED, -}; - -static struct clk ck_dpll1 = { - .name = "ck_dpll1", - .parent = &ck_ref, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_PROPAGATES | ALWAYS_ENABLED, -}; - -static struct clk ck_dpll1out = { - .name = "ck_dpll1out", - .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP16XX, - .enable_reg = ARM_IDLECT2, - .enable_bit = EN_CKOUT_ARM, - .recalc = &followparent_recalc, -}; - -static struct clk arm_ck = { - .name = "arm_ck", - .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_CKCTL | RATE_PROPAGATES | ALWAYS_ENABLED, - .rate_offset = CKCTL_ARMDIV_OFFSET, - .recalc = &ckctl_recalc, -}; - -static struct clk armper_ck = { - .name = "armper_ck", - .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_CKCTL, - .enable_reg = ARM_IDLECT2, - .enable_bit = EN_PERCK, - .rate_offset = CKCTL_PERDIV_OFFSET, - .recalc = &ckctl_recalc, -}; - -static struct clk arm_gpio_ck = { - .name = "arm_gpio_ck", - .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP1510, - .enable_reg = ARM_IDLECT2, - .enable_bit = EN_GPIOCK, - .recalc = &followparent_recalc, -}; - -static struct clk armxor_ck = { - .name = "armxor_ck", - .parent = &ck_ref, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX, - .enable_reg = ARM_IDLECT2, - .enable_bit = EN_XORPCK, - .recalc = &followparent_recalc, -}; - -static struct clk armtim_ck = { - .name = "armtim_ck", - .parent = &ck_ref, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX, - .enable_reg = ARM_IDLECT2, - .enable_bit = EN_TIMCK, - .recalc = &followparent_recalc, -}; - -static struct clk armwdt_ck = { - .name = "armwdt_ck", - .parent = &ck_ref, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX, - .enable_reg = ARM_IDLECT2, - .enable_bit = EN_WDTCK, - .recalc = &watchdog_recalc, -}; - -static struct clk arminth_ck16xx = { - .name = "arminth_ck", - .parent = &arm_ck, - .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, - .recalc = &followparent_recalc, - /* Note: On 16xx the frequency can be divided by 2 by programming - * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1 - * - * 1510 version is in TC clocks. - */ -}; - -static struct clk dsp_ck = { - .name = "dsp_ck", - .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_CKCTL, - .enable_reg = ARM_CKCTL, - .enable_bit = EN_DSPCK, - .rate_offset = CKCTL_DSPDIV_OFFSET, - .recalc = &ckctl_recalc, -}; - -static struct clk dspmmu_ck = { - .name = "dspmmu_ck", - .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_CKCTL | ALWAYS_ENABLED, - .rate_offset = CKCTL_DSPMMUDIV_OFFSET, - .recalc = &ckctl_recalc, -}; - -static struct clk dspper_ck = { - .name = "dspper_ck", - .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_CKCTL | DSP_DOMAIN_CLOCK | VIRTUAL_IO_ADDRESS, - .enable_reg = DSP_IDLECT2, - .enable_bit = EN_PERCK, - .rate_offset = CKCTL_PERDIV_OFFSET, - .recalc = &followparent_recalc, - //.recalc = &ckctl_recalc, -}; - -static struct clk dspxor_ck = { - .name = "dspxor_ck", - .parent = &ck_ref, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - DSP_DOMAIN_CLOCK | VIRTUAL_IO_ADDRESS, - .enable_reg = DSP_IDLECT2, - .enable_bit = EN_XORPCK, - .recalc = &followparent_recalc, -}; - -static struct clk dsptim_ck = { - .name = "dsptim_ck", - .parent = &ck_ref, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - DSP_DOMAIN_CLOCK | VIRTUAL_IO_ADDRESS, - .enable_reg = DSP_IDLECT2, - .enable_bit = EN_DSPTIMCK, - .recalc = &followparent_recalc, -}; - -static struct clk tc_ck = { - .name = "tc_ck", - .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP730 | - RATE_CKCTL | RATE_PROPAGATES | ALWAYS_ENABLED, - .rate_offset = CKCTL_TCDIV_OFFSET, - .recalc = &ckctl_recalc, -}; - -static struct clk arminth_ck1510 = { - .name = "arminth_ck", - .parent = &tc_ck, - .flags = CLOCK_IN_OMAP1510 | ALWAYS_ENABLED, - .recalc = &followparent_recalc, - /* Note: On 1510 the frequency follows TC_CK - * - * 16xx version is in MPU clocks. - */ -}; - -static struct clk tipb_ck = { - .name = "tibp_ck", - .parent = &tc_ck, - .flags = CLOCK_IN_OMAP1510 | ALWAYS_ENABLED, - .recalc = &followparent_recalc, -}; - -static struct clk l3_ocpi_ck = { - .name = "l3_ocpi_ck", - .parent = &tc_ck, - .flags = CLOCK_IN_OMAP16XX, - .enable_reg = ARM_IDLECT3, - .enable_bit = EN_OCPI_CK, - .recalc = &followparent_recalc, -}; +DEFINE_SPINLOCK(clockfw_lock); -static struct clk tc1_ck = { - .name = "tc1_ck", - .parent = &tc_ck, - .flags = CLOCK_IN_OMAP16XX, - .enable_reg = ARM_IDLECT3, - .enable_bit = EN_TC1_CK, - .recalc = &followparent_recalc, -}; +static struct clk_functions *arch_clock; -static struct clk tc2_ck = { - .name = "tc2_ck", - .parent = &tc_ck, - .flags = CLOCK_IN_OMAP16XX, - .enable_reg = ARM_IDLECT3, - .enable_bit = EN_TC2_CK, - .recalc = &followparent_recalc, -}; +/*------------------------------------------------------------------------- + * Standard clock functions defined in asm/hardware/clock.h + *-------------------------------------------------------------------------*/ -static struct clk dma_ck = { - .name = "dma_ck", - .parent = &tc_ck, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - ALWAYS_ENABLED, - .recalc = &followparent_recalc, -}; - -static struct clk dma_lcdfree_ck = { - .name = "dma_lcdfree_ck", - .parent = &tc_ck, - .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, - .recalc = &followparent_recalc, -}; - -static struct clk api_ck = { - .name = "api_ck", - .parent = &tc_ck, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX, - .enable_reg = ARM_IDLECT2, - .enable_bit = EN_APICK, - .recalc = &followparent_recalc, -}; - -static struct clk lb_ck = { - .name = "lb_ck", - .parent = &tc_ck, - .flags = CLOCK_IN_OMAP1510, - .enable_reg = ARM_IDLECT2, - .enable_bit = EN_LBCK, - .recalc = &followparent_recalc, -}; - -static struct clk rhea1_ck = { - .name = "rhea1_ck", - .parent = &tc_ck, - .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, - .recalc = &followparent_recalc, -}; - -static struct clk rhea2_ck = { - .name = "rhea2_ck", - .parent = &tc_ck, - .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, - .recalc = &followparent_recalc, -}; - -static struct clk lcd_ck = { - .name = "lcd_ck", - .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP730 | - RATE_CKCTL, - .enable_reg = ARM_IDLECT2, - .enable_bit = EN_LCDCK, - .rate_offset = CKCTL_LCDDIV_OFFSET, - .recalc = &ckctl_recalc, -}; - -static struct clk uart1_1510 = { - .name = "uart1_ck", - /* Direct from ULPD, no parent */ - .rate = 12000000, - .flags = CLOCK_IN_OMAP1510 | ENABLE_REG_32BIT | ALWAYS_ENABLED, - .enable_reg = MOD_CONF_CTRL_0, - .enable_bit = 29, /* Chooses between 12MHz and 48MHz */ - .set_rate = &set_uart_rate, - .recalc = &uart_recalc, -}; - -static struct clk uart1_16xx = { - .name = "uart1_ck", - /* Direct from ULPD, no parent */ - .rate = 48000000, - .flags = CLOCK_IN_OMAP16XX | RATE_FIXED | ENABLE_REG_32BIT, - .enable_reg = MOD_CONF_CTRL_0, - .enable_bit = 29, -}; - -static struct clk uart2_ck = { - .name = "uart2_ck", - /* Direct from ULPD, no parent */ - .rate = 12000000, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | ENABLE_REG_32BIT | - ALWAYS_ENABLED, - .enable_reg = MOD_CONF_CTRL_0, - .enable_bit = 30, /* Chooses between 12MHz and 48MHz */ - .set_rate = &set_uart_rate, - .recalc = &uart_recalc, -}; - -static struct clk uart3_1510 = { - .name = "uart3_ck", - /* Direct from ULPD, no parent */ - .rate = 12000000, - .flags = CLOCK_IN_OMAP1510 | ENABLE_REG_32BIT | ALWAYS_ENABLED, - .enable_reg = MOD_CONF_CTRL_0, - .enable_bit = 31, /* Chooses between 12MHz and 48MHz */ - .set_rate = &set_uart_rate, - .recalc = &uart_recalc, -}; - -static struct clk uart3_16xx = { - .name = "uart3_ck", - /* Direct from ULPD, no parent */ - .rate = 48000000, - .flags = CLOCK_IN_OMAP16XX | RATE_FIXED | ENABLE_REG_32BIT, - .enable_reg = MOD_CONF_CTRL_0, - .enable_bit = 31, -}; - -static struct clk usb_clko = { /* 6 MHz output on W4_USB_CLKO */ - .name = "usb_clko", - /* Direct from ULPD, no parent */ - .rate = 6000000, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_FIXED | ENABLE_REG_32BIT, - .enable_reg = ULPD_CLOCK_CTRL, - .enable_bit = USB_MCLK_EN_BIT, -}; - -static struct clk usb_hhc_ck1510 = { - .name = "usb_hhc_ck", - /* Direct from ULPD, no parent */ - .rate = 48000000, /* Actually 2 clocks, 12MHz and 48MHz */ - .flags = CLOCK_IN_OMAP1510 | - RATE_FIXED | ENABLE_REG_32BIT, - .enable_reg = MOD_CONF_CTRL_0, - .enable_bit = USB_HOST_HHC_UHOST_EN, -}; - -static struct clk usb_hhc_ck16xx = { - .name = "usb_hhc_ck", - /* Direct from ULPD, no parent */ - .rate = 48000000, - /* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */ - .flags = CLOCK_IN_OMAP16XX | - RATE_FIXED | ENABLE_REG_32BIT, - .enable_reg = OTG_BASE + 0x08 /* OTG_SYSCON_2 */, - .enable_bit = 8 /* UHOST_EN */, -}; - -static struct clk usb_dc_ck = { - .name = "usb_dc_ck", - /* Direct from ULPD, no parent */ - .rate = 48000000, - .flags = CLOCK_IN_OMAP16XX | RATE_FIXED, - .enable_reg = SOFT_REQ_REG, - .enable_bit = 4, -}; - -static struct clk mclk_1510 = { - .name = "mclk", - /* Direct from ULPD, no parent. May be enabled by ext hardware. */ - .rate = 12000000, - .flags = CLOCK_IN_OMAP1510 | RATE_FIXED, -}; - -static struct clk mclk_16xx = { - .name = "mclk", - /* Direct from ULPD, no parent. May be enabled by ext hardware. */ - .flags = CLOCK_IN_OMAP16XX, - .enable_reg = COM_CLK_DIV_CTRL_SEL, - .enable_bit = COM_ULPD_PLL_CLK_REQ, - .set_rate = &set_ext_clk_rate, - .round_rate = &round_ext_clk_rate, - .init = &init_ext_clk, -}; - -static struct clk bclk_1510 = { - .name = "bclk", - /* Direct from ULPD, no parent. May be enabled by ext hardware. */ - .rate = 12000000, - .flags = CLOCK_IN_OMAP1510 | RATE_FIXED, -}; - -static struct clk bclk_16xx = { - .name = "bclk", - /* Direct from ULPD, no parent. May be enabled by ext hardware. */ - .flags = CLOCK_IN_OMAP16XX, - .enable_reg = SWD_CLK_DIV_CTRL_SEL, - .enable_bit = SWD_ULPD_PLL_CLK_REQ, - .set_rate = &set_ext_clk_rate, - .round_rate = &round_ext_clk_rate, - .init = &init_ext_clk, -}; - -static struct clk mmc1_ck = { - .name = "mmc1_ck", - /* Functional clock is direct from ULPD, interface clock is ARMPER */ - .parent = &armper_ck, - .rate = 48000000, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_FIXED | ENABLE_REG_32BIT, - .enable_reg = MOD_CONF_CTRL_0, - .enable_bit = 23, -}; - -static struct clk mmc2_ck = { - .name = "mmc2_ck", - /* Functional clock is direct from ULPD, interface clock is ARMPER */ - .parent = &armper_ck, - .rate = 48000000, - .flags = CLOCK_IN_OMAP16XX | - RATE_FIXED | ENABLE_REG_32BIT, - .enable_reg = MOD_CONF_CTRL_0, - .enable_bit = 20, -}; - -static struct clk virtual_ck_mpu = { - .name = "mpu", - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - VIRTUAL_CLOCK | ALWAYS_ENABLED, - .parent = &arm_ck, /* Is smarter alias for */ - .recalc = &followparent_recalc, - .set_rate = &select_table_rate, - .round_rate = &round_to_table_rate, -}; - - -static struct clk * onchip_clks[] = { - /* non-ULPD clocks */ - &ck_ref, - &ck_dpll1, - /* CK_GEN1 clocks */ - &ck_dpll1out, - &arm_ck, - &armper_ck, - &arm_gpio_ck, - &armxor_ck, - &armtim_ck, - &armwdt_ck, - &arminth_ck1510, &arminth_ck16xx, - /* CK_GEN2 clocks */ - &dsp_ck, - &dspmmu_ck, - &dspper_ck, - &dspxor_ck, - &dsptim_ck, - /* CK_GEN3 clocks */ - &tc_ck, - &tipb_ck, - &l3_ocpi_ck, - &tc1_ck, - &tc2_ck, - &dma_ck, - &dma_lcdfree_ck, - &api_ck, - &lb_ck, - &rhea1_ck, - &rhea2_ck, - &lcd_ck, - /* ULPD clocks */ - &uart1_1510, - &uart1_16xx, - &uart2_ck, - &uart3_1510, - &uart3_16xx, - &usb_clko, - &usb_hhc_ck1510, &usb_hhc_ck16xx, - &usb_dc_ck, - &mclk_1510, &mclk_16xx, - &bclk_1510, &bclk_16xx, - &mmc1_ck, - &mmc2_ck, - /* Virtual clocks */ - &virtual_ck_mpu, -}; - -struct clk *clk_get(struct device *dev, const char *id) +struct clk * clk_get(struct device *dev, const char *id) { struct clk *p, *clk = ERR_PTR(-ENOENT); @@ -590,534 +53,200 @@ struct clk *clk_get(struct device *dev, const char *id) } EXPORT_SYMBOL(clk_get); - -void clk_put(struct clk *clk) -{ - if (clk && !IS_ERR(clk)) - module_put(clk->owner); -} -EXPORT_SYMBOL(clk_put); - - -int __clk_enable(struct clk *clk) -{ - __u16 regval16; - __u32 regval32; - - if (clk->flags & ALWAYS_ENABLED) - return 0; - - if (unlikely(clk->enable_reg == 0)) { - printk(KERN_ERR "clock.c: Enable for %s without enable code\n", - clk->name); - return 0; - } - - if (clk->flags & DSP_DOMAIN_CLOCK) { - __clk_use(&api_ck); - } - - if (clk->flags & ENABLE_REG_32BIT) { - if (clk->flags & VIRTUAL_IO_ADDRESS) { - regval32 = __raw_readl(clk->enable_reg); - regval32 |= (1 << clk->enable_bit); - __raw_writel(regval32, clk->enable_reg); - } else { - regval32 = omap_readl(clk->enable_reg); - regval32 |= (1 << clk->enable_bit); - omap_writel(regval32, clk->enable_reg); - } - } else { - if (clk->flags & VIRTUAL_IO_ADDRESS) { - regval16 = __raw_readw(clk->enable_reg); - regval16 |= (1 << clk->enable_bit); - __raw_writew(regval16, clk->enable_reg); - } else { - regval16 = omap_readw(clk->enable_reg); - regval16 |= (1 << clk->enable_bit); - omap_writew(regval16, clk->enable_reg); - } - } - - if (clk->flags & DSP_DOMAIN_CLOCK) { - __clk_unuse(&api_ck); - } - - return 0; -} - - -void __clk_disable(struct clk *clk) -{ - __u16 regval16; - __u32 regval32; - - if (clk->enable_reg == 0) - return; - - if (clk->flags & DSP_DOMAIN_CLOCK) { - __clk_use(&api_ck); - } - - if (clk->flags & ENABLE_REG_32BIT) { - if (clk->flags & VIRTUAL_IO_ADDRESS) { - regval32 = __raw_readl(clk->enable_reg); - regval32 &= ~(1 << clk->enable_bit); - __raw_writel(regval32, clk->enable_reg); - } else { - regval32 = omap_readl(clk->enable_reg); - regval32 &= ~(1 << clk->enable_bit); - omap_writel(regval32, clk->enable_reg); - } - } else { - if (clk->flags & VIRTUAL_IO_ADDRESS) { - regval16 = __raw_readw(clk->enable_reg); - regval16 &= ~(1 << clk->enable_bit); - __raw_writew(regval16, clk->enable_reg); - } else { - regval16 = omap_readw(clk->enable_reg); - regval16 &= ~(1 << clk->enable_bit); - omap_writew(regval16, clk->enable_reg); - } - } - - if (clk->flags & DSP_DOMAIN_CLOCK) { - __clk_unuse(&api_ck); - } -} - - -void __clk_unuse(struct clk *clk) -{ - if (clk->usecount > 0 && !(--clk->usecount)) { - __clk_disable(clk); - if (likely(clk->parent)) - __clk_unuse(clk->parent); - } -} - - -int __clk_use(struct clk *clk) -{ - int ret = 0; - if (clk->usecount++ == 0) { - if (likely(clk->parent)) - ret = __clk_use(clk->parent); - - if (unlikely(ret != 0)) { - clk->usecount--; - return ret; - } - - ret = __clk_enable(clk); - - if (unlikely(ret != 0) && clk->parent) { - __clk_unuse(clk->parent); - clk->usecount--; - } - } - - return ret; -} - - int clk_enable(struct clk *clk) { unsigned long flags; - int ret; + int ret = 0; spin_lock_irqsave(&clockfw_lock, flags); - ret = __clk_enable(clk); + if (clk->enable) + ret = clk->enable(clk); + else if (arch_clock->clk_enable) + ret = arch_clock->clk_enable(clk); + else + printk(KERN_ERR "Could not enable clock %s\n", clk->name); spin_unlock_irqrestore(&clockfw_lock, flags); + return ret; } EXPORT_SYMBOL(clk_enable); - void clk_disable(struct clk *clk) { unsigned long flags; spin_lock_irqsave(&clockfw_lock, flags); - __clk_disable(clk); + if (clk->disable) + clk->disable(clk); + else if (arch_clock->clk_disable) + arch_clock->clk_disable(clk); + else + printk(KERN_ERR "Could not disable clock %s\n", clk->name); spin_unlock_irqrestore(&clockfw_lock, flags); } EXPORT_SYMBOL(clk_disable); - int clk_use(struct clk *clk) { unsigned long flags; int ret = 0; spin_lock_irqsave(&clockfw_lock, flags); - ret = __clk_use(clk); + if (arch_clock->clk_use) + ret = arch_clock->clk_use(clk); spin_unlock_irqrestore(&clockfw_lock, flags); + return ret; } EXPORT_SYMBOL(clk_use); - void clk_unuse(struct clk *clk) { unsigned long flags; spin_lock_irqsave(&clockfw_lock, flags); - __clk_unuse(clk); + if (arch_clock->clk_unuse) + arch_clock->clk_unuse(clk); spin_unlock_irqrestore(&clockfw_lock, flags); } EXPORT_SYMBOL(clk_unuse); - int clk_get_usecount(struct clk *clk) { - return clk->usecount; -} -EXPORT_SYMBOL(clk_get_usecount); - - -unsigned long clk_get_rate(struct clk *clk) -{ - return clk->rate; -} -EXPORT_SYMBOL(clk_get_rate); - - -static __u16 verify_ckctl_value(__u16 newval) -{ - /* This function checks for following limitations set - * by the hardware (all conditions must be true): - * DSPMMU_CK == DSP_CK or DSPMMU_CK == DSP_CK/2 - * ARM_CK >= TC_CK - * DSP_CK >= TC_CK - * DSPMMU_CK >= TC_CK - * - * In addition following rules are enforced: - * LCD_CK <= TC_CK - * ARMPER_CK <= TC_CK - * - * However, maximum frequencies are not checked for! - */ - __u8 per_exp; - __u8 lcd_exp; - __u8 arm_exp; - __u8 dsp_exp; - __u8 tc_exp; - __u8 dspmmu_exp; - - per_exp = (newval >> CKCTL_PERDIV_OFFSET) & 3; - lcd_exp = (newval >> CKCTL_LCDDIV_OFFSET) & 3; - arm_exp = (newval >> CKCTL_ARMDIV_OFFSET) & 3; - dsp_exp = (newval >> CKCTL_DSPDIV_OFFSET) & 3; - tc_exp = (newval >> CKCTL_TCDIV_OFFSET) & 3; - dspmmu_exp = (newval >> CKCTL_DSPMMUDIV_OFFSET) & 3; - - if (dspmmu_exp < dsp_exp) - dspmmu_exp = dsp_exp; - if (dspmmu_exp > dsp_exp+1) - dspmmu_exp = dsp_exp+1; - if (tc_exp < arm_exp) - tc_exp = arm_exp; - if (tc_exp < dspmmu_exp) - tc_exp = dspmmu_exp; - if (tc_exp > lcd_exp) - lcd_exp = tc_exp; - if (tc_exp > per_exp) - per_exp = tc_exp; + unsigned long flags; + int ret = 0; - newval &= 0xf000; - newval |= per_exp << CKCTL_PERDIV_OFFSET; - newval |= lcd_exp << CKCTL_LCDDIV_OFFSET; - newval |= arm_exp << CKCTL_ARMDIV_OFFSET; - newval |= dsp_exp << CKCTL_DSPDIV_OFFSET; - newval |= tc_exp << CKCTL_TCDIV_OFFSET; - newval |= dspmmu_exp << CKCTL_DSPMMUDIV_OFFSET; + spin_lock_irqsave(&clockfw_lock, flags); + ret = clk->usecount; + spin_unlock_irqrestore(&clockfw_lock, flags); - return newval; + return ret; } +EXPORT_SYMBOL(clk_get_usecount); - -static int calc_dsor_exp(struct clk *clk, unsigned long rate) +unsigned long clk_get_rate(struct clk *clk) { - /* Note: If target frequency is too low, this function will return 4, - * which is invalid value. Caller must check for this value and act - * accordingly. - * - * Note: This function does not check for following limitations set - * by the hardware (all conditions must be true): - * DSPMMU_CK == DSP_CK or DSPMMU_CK == DSP_CK/2 - * ARM_CK >= TC_CK - * DSP_CK >= TC_CK - * DSPMMU_CK >= TC_CK - */ - unsigned long realrate; - struct clk * parent; - unsigned dsor_exp; - - if (unlikely(!(clk->flags & RATE_CKCTL))) - return -EINVAL; - - parent = clk->parent; - if (unlikely(parent == 0)) - return -EIO; - - realrate = parent->rate; - for (dsor_exp=0; dsor_exp<4; dsor_exp++) { - if (realrate <= rate) - break; + unsigned long flags; + unsigned long ret = 0; - realrate /= 2; - } + spin_lock_irqsave(&clockfw_lock, flags); + ret = clk->rate; + spin_unlock_irqrestore(&clockfw_lock, flags); - return dsor_exp; + return ret; } +EXPORT_SYMBOL(clk_get_rate); - -static void ckctl_recalc(struct clk * clk) +void clk_put(struct clk *clk) { - int dsor; - - /* Calculate divisor encoded as 2-bit exponent */ - if (clk->flags & DSP_DOMAIN_CLOCK) { - /* The clock control bits are in DSP domain, - * so api_ck is needed for access. - * Note that DSP_CKCTL virt addr = phys addr, so - * we must use __raw_readw() instead of omap_readw(). - */ - __clk_use(&api_ck); - dsor = 1 << (3 & (__raw_readw(DSP_CKCTL) >> clk->rate_offset)); - __clk_unuse(&api_ck); - } else { - dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset)); - } - if (unlikely(clk->rate == clk->parent->rate / dsor)) - return; /* No change, quick exit */ - clk->rate = clk->parent->rate / dsor; - - if (unlikely(clk->flags & RATE_PROPAGATES)) - propagate_rate(clk); + if (clk && !IS_ERR(clk)) + module_put(clk->owner); } +EXPORT_SYMBOL(clk_put); +/*------------------------------------------------------------------------- + * Optional clock functions defined in asm/hardware/clock.h + *-------------------------------------------------------------------------*/ long clk_round_rate(struct clk *clk, unsigned long rate) { - int dsor_exp; - - if (clk->flags & RATE_FIXED) - return clk->rate; - - if (clk->flags & RATE_CKCTL) { - dsor_exp = calc_dsor_exp(clk, rate); - if (dsor_exp < 0) - return dsor_exp; - if (dsor_exp > 3) - dsor_exp = 3; - return clk->parent->rate / (1 << dsor_exp); - } + unsigned long flags; + long ret = 0; - if(clk->round_rate != 0) - return clk->round_rate(clk, rate); + spin_lock_irqsave(&clockfw_lock, flags); + if (arch_clock->clk_round_rate) + ret = arch_clock->clk_round_rate(clk, rate); + spin_unlock_irqrestore(&clockfw_lock, flags); - return clk->rate; + return ret; } EXPORT_SYMBOL(clk_round_rate); - -static void propagate_rate(struct clk * clk) -{ - struct clk ** clkp; - - for (clkp = onchip_clks; clkp < onchip_clks+ARRAY_SIZE(onchip_clks); clkp++) { - if (likely((*clkp)->parent != clk)) continue; - if (likely((*clkp)->recalc)) - (*clkp)->recalc(*clkp); - } -} - - -static int select_table_rate(struct clk * clk, unsigned long rate) +int clk_set_rate(struct clk *clk, unsigned long rate) { - /* Find the highest supported frequency <= rate and switch to it */ - struct mpu_rate * ptr; - - if (clk != &virtual_ck_mpu) - return -EINVAL; - - for (ptr = rate_table; ptr->rate; ptr++) { - if (ptr->xtal != ck_ref.rate) - continue; - - /* DPLL1 cannot be reprogrammed without risking system crash */ - if (likely(ck_dpll1.rate!=0) && ptr->pll_rate != ck_dpll1.rate) - continue; - - /* Can check only after xtal frequency check */ - if (ptr->rate <= rate) - break; - } - - if (!ptr->rate) - return -EINVAL; + unsigned long flags; + int ret = 0; - /* - * In most cases we should not need to reprogram DPLL. - * Reprogramming the DPLL is tricky, it must be done from SRAM. - */ - omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val); + spin_lock_irqsave(&clockfw_lock, flags); + if (arch_clock->clk_set_rate) + ret = arch_clock->clk_set_rate(clk, rate); + spin_unlock_irqrestore(&clockfw_lock, flags); - ck_dpll1.rate = ptr->pll_rate; - propagate_rate(&ck_dpll1); - return 0; + return ret; } +EXPORT_SYMBOL(clk_set_rate); - -static long round_to_table_rate(struct clk * clk, unsigned long rate) +int clk_set_parent(struct clk *clk, struct clk *parent) { - /* Find the highest supported frequency <= rate */ - struct mpu_rate * ptr; - long highest_rate; - - if (clk != &virtual_ck_mpu) - return -EINVAL; - - highest_rate = -EINVAL; - - for (ptr = rate_table; ptr->rate; ptr++) { - if (ptr->xtal != ck_ref.rate) - continue; - - highest_rate = ptr->rate; + unsigned long flags; + int ret = 0; - /* Can check only after xtal frequency check */ - if (ptr->rate <= rate) - break; - } + spin_lock_irqsave(&clockfw_lock, flags); + if (arch_clock->clk_set_parent) + ret = arch_clock->clk_set_parent(clk, parent); + spin_unlock_irqrestore(&clockfw_lock, flags); - return highest_rate; + return ret; } +EXPORT_SYMBOL(clk_set_parent); - -int clk_set_rate(struct clk *clk, unsigned long rate) +struct clk *clk_get_parent(struct clk *clk) { - int ret = -EINVAL; - int dsor_exp; - __u16 regval; - unsigned long flags; - - if (clk->flags & RATE_CKCTL) { - dsor_exp = calc_dsor_exp(clk, rate); - if (dsor_exp > 3) - dsor_exp = -EINVAL; - if (dsor_exp < 0) - return dsor_exp; - - spin_lock_irqsave(&clockfw_lock, flags); - regval = omap_readw(ARM_CKCTL); - regval &= ~(3 << clk->rate_offset); - regval |= dsor_exp << clk->rate_offset; - regval = verify_ckctl_value(regval); - omap_writew(regval, ARM_CKCTL); - clk->rate = clk->parent->rate / (1 << dsor_exp); - spin_unlock_irqrestore(&clockfw_lock, flags); - ret = 0; - } else if(clk->set_rate != 0) { - spin_lock_irqsave(&clockfw_lock, flags); - ret = clk->set_rate(clk, rate); - spin_unlock_irqrestore(&clockfw_lock, flags); - } + unsigned long flags; + struct clk * ret = NULL; - if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES))) - propagate_rate(clk); + spin_lock_irqsave(&clockfw_lock, flags); + if (arch_clock->clk_get_parent) + ret = arch_clock->clk_get_parent(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); return ret; } -EXPORT_SYMBOL(clk_set_rate); +EXPORT_SYMBOL(clk_get_parent); +/*------------------------------------------------------------------------- + * OMAP specific clock functions shared between omap1 and omap2 + *-------------------------------------------------------------------------*/ -static unsigned calc_ext_dsor(unsigned long rate) -{ - unsigned dsor; +unsigned int __initdata mpurate; - /* MCLK and BCLK divisor selection is not linear: - * freq = 96MHz / dsor - * - * RATIO_SEL range: dsor <-> RATIO_SEL - * 0..6: (RATIO_SEL+2) <-> (dsor-2) - * 6..48: (8+(RATIO_SEL-6)*2) <-> ((dsor-8)/2+6) - * Minimum dsor is 2 and maximum is 96. Odd divisors starting from 9 - * can not be used. - */ - for (dsor = 2; dsor < 96; ++dsor) { - if ((dsor & 1) && dsor > 8) - continue; - if (rate >= 96000000 / dsor) - break; - } - return dsor; -} - -/* Only needed on 1510 */ -static int set_uart_rate(struct clk * clk, unsigned long rate) -{ - unsigned int val; - - val = omap_readl(clk->enable_reg); - if (rate == 12000000) - val &= ~(1 << clk->enable_bit); - else if (rate == 48000000) - val |= (1 << clk->enable_bit); - else - return -EINVAL; - omap_writel(val, clk->enable_reg); - clk->rate = rate; - - return 0; -} - -static int set_ext_clk_rate(struct clk * clk, unsigned long rate) +/* + * By default we use the rate set by the bootloader. + * You can override this with mpurate= cmdline option. + */ +static int __init omap_clk_setup(char *str) { - unsigned dsor; - __u16 ratio_bits; + get_option(&str, &mpurate); - dsor = calc_ext_dsor(rate); - clk->rate = 96000000 / dsor; - if (dsor > 8) - ratio_bits = ((dsor - 8) / 2 + 6) << 2; - else - ratio_bits = (dsor - 2) << 2; + if (!mpurate) + return 1; - ratio_bits |= omap_readw(clk->enable_reg) & ~0xfd; - omap_writew(ratio_bits, clk->enable_reg); + if (mpurate < 1000) + mpurate *= 1000000; - return 0; + return 1; } +__setup("mpurate=", omap_clk_setup); - -static long round_ext_clk_rate(struct clk * clk, unsigned long rate) +/* Used for clocks that always have same value as the parent clock */ +void followparent_recalc(struct clk *clk) { - return 96000000 / calc_ext_dsor(rate); + clk->rate = clk->parent->rate; } - -static void init_ext_clk(struct clk * clk) +/* Propagate rate to children */ +void propagate_rate(struct clk * tclk) { - unsigned dsor; - __u16 ratio_bits; + struct clk *clkp; - /* Determine current rate and ensure clock is based on 96MHz APLL */ - ratio_bits = omap_readw(clk->enable_reg) & ~1; - omap_writew(ratio_bits, clk->enable_reg); - - ratio_bits = (ratio_bits & 0xfc) >> 2; - if (ratio_bits > 6) - dsor = (ratio_bits - 6) * 2 + 8; - else - dsor = ratio_bits + 2; - - clk-> rate = 96000000 / dsor; + list_for_each_entry(clkp, &clocks, node) { + if (likely(clkp->parent != tclk)) + continue; + if (likely((u32)clkp->recalc)) + clkp->recalc(clkp); + } } - int clk_register(struct clk *clk) { down(&clocks_sem); @@ -1125,6 +254,7 @@ int clk_register(struct clk *clk) if (clk->init) clk->init(clk); up(&clocks_sem); + return 0; } EXPORT_SYMBOL(clk_register); @@ -1137,203 +267,38 @@ void clk_unregister(struct clk *clk) } EXPORT_SYMBOL(clk_unregister); -#ifdef CONFIG_OMAP_RESET_CLOCKS -/* - * Resets some clocks that may be left on from bootloader, - * but leaves serial clocks on. See also omap_late_clk_reset(). - */ -static inline void omap_early_clk_reset(void) +void clk_deny_idle(struct clk *clk) { - //omap_writel(0x3 << 29, MOD_CONF_CTRL_0); + unsigned long flags; + + spin_lock_irqsave(&clockfw_lock, flags); + if (arch_clock->clk_deny_idle) + arch_clock->clk_deny_idle(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); } -#else -#define omap_early_clk_reset() {} -#endif +EXPORT_SYMBOL(clk_deny_idle); -int __init clk_init(void) +void clk_allow_idle(struct clk *clk) { - struct clk ** clkp; - const struct omap_clock_config *info; - int crystal_type = 0; /* Default 12 MHz */ - - omap_early_clk_reset(); - - for (clkp = onchip_clks; clkp < onchip_clks+ARRAY_SIZE(onchip_clks); clkp++) { - if (((*clkp)->flags &CLOCK_IN_OMAP1510) && cpu_is_omap1510()) { - clk_register(*clkp); - continue; - } - - if (((*clkp)->flags &CLOCK_IN_OMAP16XX) && cpu_is_omap16xx()) { - clk_register(*clkp); - continue; - } - - if (((*clkp)->flags &CLOCK_IN_OMAP730) && cpu_is_omap730()) { - clk_register(*clkp); - continue; - } - } - - info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config); - if (info != NULL) { - if (!cpu_is_omap1510()) - crystal_type = info->system_clock_type; - } - -#if defined(CONFIG_ARCH_OMAP730) - ck_ref.rate = 13000000; -#elif defined(CONFIG_ARCH_OMAP16XX) - if (crystal_type == 2) - ck_ref.rate = 19200000; -#endif - - printk("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n", - omap_readw(ARM_SYSST), omap_readw(DPLL_CTL), - omap_readw(ARM_CKCTL)); - - /* We want to be in syncronous scalable mode */ - omap_writew(0x1000, ARM_SYSST); - -#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER - /* Use values set by bootloader. Determine PLL rate and recalculate - * dependent clocks as if kernel had changed PLL or divisors. - */ - { - unsigned pll_ctl_val = omap_readw(DPLL_CTL); - - ck_dpll1.rate = ck_ref.rate; /* Base xtal rate */ - if (pll_ctl_val & 0x10) { - /* PLL enabled, apply multiplier and divisor */ - if (pll_ctl_val & 0xf80) - ck_dpll1.rate *= (pll_ctl_val & 0xf80) >> 7; - ck_dpll1.rate /= ((pll_ctl_val & 0x60) >> 5) + 1; - } else { - /* PLL disabled, apply bypass divisor */ - switch (pll_ctl_val & 0xc) { - case 0: - break; - case 0x4: - ck_dpll1.rate /= 2; - break; - default: - ck_dpll1.rate /= 4; - break; - } - } - } - propagate_rate(&ck_dpll1); -#else - /* Find the highest supported frequency and enable it */ - if (select_table_rate(&virtual_ck_mpu, ~0)) { - printk(KERN_ERR "System frequencies not set. Check your config.\n"); - /* Guess sane values (60MHz) */ - omap_writew(0x2290, DPLL_CTL); - omap_writew(0x1005, ARM_CKCTL); - ck_dpll1.rate = 60000000; - propagate_rate(&ck_dpll1); - } -#endif - /* Cache rates for clocks connected to ck_ref (not dpll1) */ - propagate_rate(&ck_ref); - printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): " - "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n", - ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10, - ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10, - arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10); - -#ifdef CONFIG_MACH_OMAP_PERSEUS2 - /* Select slicer output as OMAP input clock */ - omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL); -#endif - - /* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */ - omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL); - - /* Put DSP/MPUI into reset until needed */ - omap_writew(0, ARM_RSTCT1); - omap_writew(1, ARM_RSTCT2); - omap_writew(0x400, ARM_IDLECT1); - - /* - * According to OMAP5910 Erratum SYS_DMA_1, bit DMACK_REQ (bit 8) - * of the ARM_IDLECT2 register must be set to zero. The power-on - * default value of this bit is one. - */ - omap_writew(0x0000, ARM_IDLECT2); /* Turn LCD clock off also */ - - /* - * Only enable those clocks we will need, let the drivers - * enable other clocks as necessary - */ - clk_use(&armper_ck); - clk_use(&armxor_ck); - clk_use(&armtim_ck); - - if (cpu_is_omap1510()) - clk_enable(&arm_gpio_ck); + unsigned long flags; - return 0; + spin_lock_irqsave(&clockfw_lock, flags); + if (arch_clock->clk_allow_idle) + arch_clock->clk_allow_idle(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); } +EXPORT_SYMBOL(clk_allow_idle); +/*-------------------------------------------------------------------------*/ -#ifdef CONFIG_OMAP_RESET_CLOCKS - -static int __init omap_late_clk_reset(void) +int __init clk_init(struct clk_functions * custom_clocks) { - /* Turn off all unused clocks */ - struct clk *p; - __u32 regval32; - - /* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */ - regval32 = omap_readw(SOFT_REQ_REG) & (1 << 4); - omap_writew(regval32, SOFT_REQ_REG); - omap_writew(0, SOFT_REQ_REG2); - - list_for_each_entry(p, &clocks, node) { - if (p->usecount > 0 || (p->flags & ALWAYS_ENABLED) || - p->enable_reg == 0) - continue; - - /* Assume no DSP clocks have been activated by bootloader */ - if (p->flags & DSP_DOMAIN_CLOCK) - continue; - - /* Is the clock already disabled? */ - if (p->flags & ENABLE_REG_32BIT) { - if (p->flags & VIRTUAL_IO_ADDRESS) - regval32 = __raw_readl(p->enable_reg); - else - regval32 = omap_readl(p->enable_reg); - } else { - if (p->flags & VIRTUAL_IO_ADDRESS) - regval32 = __raw_readw(p->enable_reg); - else - regval32 = omap_readw(p->enable_reg); - } - - if ((regval32 & (1 << p->enable_bit)) == 0) - continue; - - /* FIXME: This clock seems to be necessary but no-one - * has asked for its activation. */ - if (p == &tc2_ck // FIX: pm.c (SRAM), CCP, Camera - || p == &ck_dpll1out // FIX: SoSSI, SSR - || p == &arm_gpio_ck // FIX: GPIO code for 1510 - ) { - printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n", - p->name); - continue; - } - - printk(KERN_INFO "Disabling unused clock \"%s\"... ", p->name); - __clk_disable(p); - printk(" done\n"); + if (!custom_clocks) { + printk(KERN_ERR "No custom clock functions registered\n"); + BUG(); } + arch_clock = custom_clocks; + return 0; } - -late_initcall(omap_late_clk_reset); - -#endif diff --git a/arch/arm/plat-omap/clock.h b/arch/arm/plat-omap/clock.h deleted file mode 100644 index a89e1e8c2519..000000000000 --- a/arch/arm/plat-omap/clock.h +++ /dev/null @@ -1,120 +0,0 @@ -/* - * linux/arch/arm/plat-omap/clock.h - * - * Copyright (C) 2004 Nokia corporation - * Written by Tuukka Tikkanen - * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_OMAP_CLOCK_H -#define __ARCH_ARM_OMAP_CLOCK_H - -struct module; - -struct clk { - struct list_head node; - struct module *owner; - const char *name; - struct clk *parent; - unsigned long rate; - __s8 usecount; - __u16 flags; - __u32 enable_reg; - __u8 enable_bit; - __u8 rate_offset; - void (*recalc)(struct clk *); - int (*set_rate)(struct clk *, unsigned long); - long (*round_rate)(struct clk *, unsigned long); - void (*init)(struct clk *); -}; - - -struct mpu_rate { - unsigned long rate; - unsigned long xtal; - unsigned long pll_rate; - __u16 ckctl_val; - __u16 dpllctl_val; -}; - - -/* Clock flags */ -#define RATE_CKCTL 1 -#define RATE_FIXED 2 -#define RATE_PROPAGATES 4 -#define VIRTUAL_CLOCK 8 -#define ALWAYS_ENABLED 16 -#define ENABLE_REG_32BIT 32 -#define CLOCK_IN_OMAP16XX 64 -#define CLOCK_IN_OMAP1510 128 -#define CLOCK_IN_OMAP730 256 -#define DSP_DOMAIN_CLOCK 512 -#define VIRTUAL_IO_ADDRESS 1024 - -/* ARM_CKCTL bit shifts */ -#define CKCTL_PERDIV_OFFSET 0 -#define CKCTL_LCDDIV_OFFSET 2 -#define CKCTL_ARMDIV_OFFSET 4 -#define CKCTL_DSPDIV_OFFSET 6 -#define CKCTL_TCDIV_OFFSET 8 -#define CKCTL_DSPMMUDIV_OFFSET 10 -/*#define ARM_TIMXO 12*/ -#define EN_DSPCK 13 -/*#define ARM_INTHCK_SEL 14*/ /* Divide-by-2 for mpu inth_ck */ -/* DSP_CKCTL bit shifts */ -#define CKCTL_DSPPERDIV_OFFSET 0 - -/* ARM_IDLECT1 bit shifts */ -/*#define IDLWDT_ARM 0*/ -/*#define IDLXORP_ARM 1*/ -/*#define IDLPER_ARM 2*/ -/*#define IDLLCD_ARM 3*/ -/*#define IDLLB_ARM 4*/ -/*#define IDLHSAB_ARM 5*/ -/*#define IDLIF_ARM 6*/ -/*#define IDLDPLL_ARM 7*/ -/*#define IDLAPI_ARM 8*/ -/*#define IDLTIM_ARM 9*/ -/*#define SETARM_IDLE 11*/ - -/* ARM_IDLECT2 bit shifts */ -#define EN_WDTCK 0 -#define EN_XORPCK 1 -#define EN_PERCK 2 -#define EN_LCDCK 3 -#define EN_LBCK 4 /* Not on 1610/1710 */ -/*#define EN_HSABCK 5*/ -#define EN_APICK 6 -#define EN_TIMCK 7 -#define DMACK_REQ 8 -#define EN_GPIOCK 9 /* Not on 1610/1710 */ -/*#define EN_LBFREECK 10*/ -#define EN_CKOUT_ARM 11 - -/* ARM_IDLECT3 bit shifts */ -#define EN_OCPI_CK 0 -#define EN_TC1_CK 2 -#define EN_TC2_CK 4 - -/* DSP_IDLECT2 bit shifts (0,1,2 are same as for ARM_IDLECT2) */ -#define EN_DSPTIMCK 5 - -/* Various register defines for clock controls scattered around OMAP chip */ -#define USB_MCLK_EN_BIT 4 /* In ULPD_CLKC_CTRL */ -#define USB_HOST_HHC_UHOST_EN 9 /* In MOD_CONF_CTRL_0 */ -#define SWD_ULPD_PLL_CLK_REQ 1 /* In SWD_CLK_DIV_CTRL_SEL */ -#define COM_ULPD_PLL_CLK_REQ 1 /* In COM_CLK_DIV_CTRL_SEL */ -#define SWD_CLK_DIV_CTRL_SEL 0xfffe0874 -#define COM_CLK_DIV_CTRL_SEL 0xfffe0878 -#define SOFT_REQ_REG 0xfffe0834 -#define SOFT_REQ_REG2 0xfffe0880 - -int clk_register(struct clk *clk); -void clk_unregister(struct clk *clk); -int clk_init(void); - -#endif diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 02bcc6c1cd1b..ccdb452630cf 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -31,7 +31,7 @@ #include #include -#include "clock.h" +#include #define NO_LENGTH_CHECK 0xffffffff @@ -117,19 +117,43 @@ EXPORT_SYMBOL(omap_get_var_config); static int __init omap_add_serial_console(void) { - const struct omap_serial_console_config *info; - - info = omap_get_config(OMAP_TAG_SERIAL_CONSOLE, - struct omap_serial_console_config); - if (info != NULL && info->console_uart) { - static char speed[11], *opt = NULL; + const struct omap_serial_console_config *con_info; + const struct omap_uart_config *uart_info; + static char speed[11], *opt = NULL; + int line, i, uart_idx; + + uart_info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config); + con_info = omap_get_config(OMAP_TAG_SERIAL_CONSOLE, + struct omap_serial_console_config); + if (uart_info == NULL || con_info == NULL) + return 0; + + if (con_info->console_uart == 0) + return 0; + + if (con_info->console_speed) { + snprintf(speed, sizeof(speed), "%u", con_info->console_speed); + opt = speed; + } - if (info->console_speed) { - snprintf(speed, sizeof(speed), "%u", info->console_speed); - opt = speed; - } - return add_preferred_console("ttyS", info->console_uart - 1, opt); + uart_idx = con_info->console_uart - 1; + if (uart_idx >= OMAP_MAX_NR_PORTS) { + printk(KERN_INFO "Console: external UART#%d. " + "Not adding it as console this time.\n", + uart_idx + 1); + return 0; + } + if (!(uart_info->enabled_uarts & (1 << uart_idx))) { + printk(KERN_ERR "Console: Selected UART#%d is " + "not enabled for this platform\n", + uart_idx + 1); + return -1; + } + line = 0; + for (i = 0; i < uart_idx; i++) { + if (uart_info->enabled_uarts & (1 << i)) + line++; } - return 0; + return add_preferred_console("ttyS", line, opt); } console_initcall(omap_add_serial_console); diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c new file mode 100644 index 000000000000..9dcce904b608 --- /dev/null +++ b/arch/arm/plat-omap/devices.c @@ -0,0 +1,381 @@ +/* + * linux/arch/arm/plat-omap/devices.c + * + * Common platform device setup/initialization for OMAP1 and OMAP2 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include + + +void omap_nop_release(struct device *dev) +{ + /* Nothing */ +} + +/*-------------------------------------------------------------------------*/ + +#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) + +#define OMAP1_I2C_BASE 0xfffb3800 +#define OMAP2_I2C_BASE1 0x48070000 +#define OMAP_I2C_SIZE 0x3f +#define OMAP1_I2C_INT INT_I2C +#define OMAP2_I2C_INT1 56 + +static struct resource i2c_resources1[] = { + { + .start = 0, + .end = 0, + .flags = IORESOURCE_MEM, + }, + { + .start = 0, + .flags = IORESOURCE_IRQ, + }, +}; + +/* DMA not used; works around erratum writing to non-empty i2c fifo */ + +static struct platform_device omap_i2c_device1 = { + .name = "i2c_omap", + .id = 1, + .dev = { + .release = omap_nop_release, + }, + .num_resources = ARRAY_SIZE(i2c_resources1), + .resource = i2c_resources1, +}; + +/* See also arch/arm/mach-omap2/devices.c for second I2C on 24xx */ +static void omap_init_i2c(void) +{ + if (cpu_is_omap24xx()) { + i2c_resources1[0].start = OMAP2_I2C_BASE1; + i2c_resources1[0].end = OMAP2_I2C_BASE1 + OMAP_I2C_SIZE; + i2c_resources1[1].start = OMAP2_I2C_INT1; + } else { + i2c_resources1[0].start = OMAP1_I2C_BASE; + i2c_resources1[0].end = OMAP1_I2C_BASE + OMAP_I2C_SIZE; + i2c_resources1[1].start = OMAP1_I2C_INT; + } + + /* FIXME define and use a boot tag, in case of boards that + * either don't wire up I2C, or chips that mux it differently... + * it can include clocking and address info, maybe more. + */ + if (cpu_is_omap24xx()) { + omap_cfg_reg(M19_24XX_I2C1_SCL); + omap_cfg_reg(L15_24XX_I2C1_SDA); + } else { + omap_cfg_reg(I2C_SCL); + omap_cfg_reg(I2C_SDA); + } + + (void) platform_device_register(&omap_i2c_device1); +} + +#else +static inline void omap_init_i2c(void) {} +#endif + +/*-------------------------------------------------------------------------*/ + +#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) + +#ifdef CONFIG_ARCH_OMAP24XX +#define OMAP_MMC1_BASE 0x4809c000 +#define OMAP_MMC1_INT 83 +#else +#define OMAP_MMC1_BASE 0xfffb7800 +#define OMAP_MMC1_INT INT_MMC +#endif +#define OMAP_MMC2_BASE 0xfffb7c00 /* omap16xx only */ + +static struct omap_mmc_conf mmc1_conf; + +static u64 mmc1_dmamask = 0xffffffff; + +static struct resource mmc1_resources[] = { + { + .start = IO_ADDRESS(OMAP_MMC1_BASE), + .end = IO_ADDRESS(OMAP_MMC1_BASE) + 0x7f, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP_MMC1_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mmc_omap_device1 = { + .name = "mmci-omap", + .id = 1, + .dev = { + .release = omap_nop_release, + .dma_mask = &mmc1_dmamask, + .platform_data = &mmc1_conf, + }, + .num_resources = ARRAY_SIZE(mmc1_resources), + .resource = mmc1_resources, +}; + +#ifdef CONFIG_ARCH_OMAP16XX + +static struct omap_mmc_conf mmc2_conf; + +static u64 mmc2_dmamask = 0xffffffff; + +static struct resource mmc2_resources[] = { + { + .start = IO_ADDRESS(OMAP_MMC2_BASE), + .end = IO_ADDRESS(OMAP_MMC2_BASE) + 0x7f, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_1610_MMC2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mmc_omap_device2 = { + .name = "mmci-omap", + .id = 2, + .dev = { + .release = omap_nop_release, + .dma_mask = &mmc2_dmamask, + .platform_data = &mmc2_conf, + }, + .num_resources = ARRAY_SIZE(mmc2_resources), + .resource = mmc2_resources, +}; +#endif + +static void __init omap_init_mmc(void) +{ + const struct omap_mmc_config *mmc_conf; + const struct omap_mmc_conf *mmc; + + /* NOTE: assumes MMC was never (wrongly) enabled */ + mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config); + if (!mmc_conf) + return; + + /* block 1 is always available and has just one pinout option */ + mmc = &mmc_conf->mmc[0]; + if (mmc->enabled) { + if (!cpu_is_omap24xx()) { + omap_cfg_reg(MMC_CMD); + omap_cfg_reg(MMC_CLK); + omap_cfg_reg(MMC_DAT0); + if (cpu_is_omap1710()) { + omap_cfg_reg(M15_1710_MMC_CLKI); + omap_cfg_reg(P19_1710_MMC_CMDDIR); + omap_cfg_reg(P20_1710_MMC_DATDIR0); + } + } + if (mmc->wire4) { + if (!cpu_is_omap24xx()) { + omap_cfg_reg(MMC_DAT1); + /* NOTE: DAT2 can be on W10 (here) or M15 */ + if (!mmc->nomux) + omap_cfg_reg(MMC_DAT2); + omap_cfg_reg(MMC_DAT3); + } + } + mmc1_conf = *mmc; + (void) platform_device_register(&mmc_omap_device1); + } + +#ifdef CONFIG_ARCH_OMAP16XX + /* block 2 is on newer chips, and has many pinout options */ + mmc = &mmc_conf->mmc[1]; + if (mmc->enabled) { + if (!mmc->nomux) { + omap_cfg_reg(Y8_1610_MMC2_CMD); + omap_cfg_reg(Y10_1610_MMC2_CLK); + omap_cfg_reg(R18_1610_MMC2_CLKIN); + omap_cfg_reg(W8_1610_MMC2_DAT0); + if (mmc->wire4) { + omap_cfg_reg(V8_1610_MMC2_DAT1); + omap_cfg_reg(W15_1610_MMC2_DAT2); + omap_cfg_reg(R10_1610_MMC2_DAT3); + } + + /* These are needed for the level shifter */ + omap_cfg_reg(V9_1610_MMC2_CMDDIR); + omap_cfg_reg(V5_1610_MMC2_DATDIR0); + omap_cfg_reg(W19_1610_MMC2_DATDIR1); + } + + /* Feedback clock must be set on OMAP-1710 MMC2 */ + if (cpu_is_omap1710()) + omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24), + MOD_CONF_CTRL_1); + mmc2_conf = *mmc; + (void) platform_device_register(&mmc_omap_device2); + } +#endif + return; +} +#else +static inline void omap_init_mmc(void) {} +#endif + +#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE) + +#ifdef CONFIG_ARCH_OMAP24XX +#define OMAP_WDT_BASE 0x48022000 +#else +#define OMAP_WDT_BASE 0xfffeb000 +#endif + +static struct resource wdt_resources[] = { + { + .start = OMAP_WDT_BASE, + .end = OMAP_WDT_BASE + 0x4f, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device omap_wdt_device = { + .name = "omap_wdt", + .id = -1, + .dev = { + .release = omap_nop_release, + }, + .num_resources = ARRAY_SIZE(wdt_resources), + .resource = wdt_resources, +}; + +static void omap_init_wdt(void) +{ + (void) platform_device_register(&omap_wdt_device); +} +#else +static inline void omap_init_wdt(void) {} +#endif + +/*-------------------------------------------------------------------------*/ + +#if defined(CONFIG_OMAP_RNG) || defined(CONFIG_OMAP_RNG_MODULE) + +#ifdef CONFIG_ARCH_OMAP24XX +#define OMAP_RNG_BASE 0x480A0000 +#else +#define OMAP_RNG_BASE 0xfffe5000 +#endif + +static struct resource rng_resources[] = { + { + .start = OMAP_RNG_BASE, + .end = OMAP_RNG_BASE + 0x4f, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device omap_rng_device = { + .name = "omap_rng", + .id = -1, + .dev = { + .release = omap_nop_release, + }, + .num_resources = ARRAY_SIZE(rng_resources), + .resource = rng_resources, +}; + +static void omap_init_rng(void) +{ + (void) platform_device_register(&omap_rng_device); +} +#else +static inline void omap_init_rng(void) {} +#endif + +#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) + +static struct omap_lcd_config omap_fb_conf; + +static u64 omap_fb_dma_mask = ~(u32)0; + +static struct platform_device omap_fb_device = { + .name = "omapfb", + .id = -1, + .dev = { + .release = omap_nop_release, + .dma_mask = &omap_fb_dma_mask, + .coherent_dma_mask = ~(u32)0, + .platform_data = &omap_fb_conf, + }, + .num_resources = 0, +}; + +static inline void omap_init_fb(void) +{ + const struct omap_lcd_config *conf; + + conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config); + if (conf != NULL) + omap_fb_conf = *conf; + platform_device_register(&omap_fb_device); +} + +#else + +static inline void omap_init_fb(void) {} + +#endif + +/* + * This gets called after board-specific INIT_MACHINE, and initializes most + * on-chip peripherals accessible on this board (except for few like USB): + * + * (a) Does any "standard config" pin muxing needed. Board-specific + * code will have muxed GPIO pins and done "nonstandard" setup; + * that code could live in the boot loader. + * (b) Populating board-specific platform_data with the data drivers + * rely on to handle wiring variations. + * (c) Creating platform devices as meaningful on this board and + * with this kernel configuration. + * + * Claiming GPIOs, and setting their direction and initial values, is the + * responsibility of the device drivers. So is responding to probe(). + * + * Board-specific knowlege like creating devices or pin setup is to be + * kept out of drivers as much as possible. In particular, pin setup + * may be handled by the boot loader, and drivers should expect it will + * normally have been done by the time they're probed. + */ +static int __init omap_init_devices(void) +{ + /* please keep these calls, and their implementations above, + * in alphabetical order so they're easier to sort through. + */ + omap_init_fb(); + omap_init_i2c(); + omap_init_mmc(); + omap_init_wdt(); + omap_init_rng(); + + return 0; +} +arch_initcall(omap_init_devices); + diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index da7b65145658..f5cc21ad0956 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -6,6 +6,8 @@ * DMA channel linking for 1610 by Samuel Ortiz * Graphics DMA and LCD DMA graphics tranformations * by Imre Deak + * OMAP2 support Copyright (C) 2004-2005 Texas Instruments, Inc. + * Merged to support both OMAP1 and OMAP2 by Tony Lindgren * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc. * * Support functions for the OMAP internal DMA channels. @@ -31,8 +33,15 @@ #include -#define OMAP_DMA_ACTIVE 0x01 +#define DEBUG_PRINTS +#undef DEBUG_PRINTS +#ifdef DEBUG_PRINTS +#define debug_printk(x) printk x +#else +#define debug_printk(x) +#endif +#define OMAP_DMA_ACTIVE 0x01 #define OMAP_DMA_CCR_EN (1 << 7) #define OMAP_FUNC_MUX_ARM_BASE (0xfffe1000 + 0xec) @@ -55,7 +64,7 @@ static int dma_chan_count; static spinlock_t dma_chan_lock; static struct omap_dma_lch dma_chan[OMAP_LOGICAL_DMA_CH_COUNT]; -const static u8 dma_irq[OMAP_LOGICAL_DMA_CH_COUNT] = { +const static u8 omap1_dma_irq[OMAP_LOGICAL_DMA_CH_COUNT] = { INT_DMA_CH0_6, INT_DMA_CH1_7, INT_DMA_CH2_8, INT_DMA_CH3, INT_DMA_CH4, INT_DMA_CH5, INT_1610_DMA_CH6, INT_1610_DMA_CH7, INT_1610_DMA_CH8, INT_1610_DMA_CH9, INT_1610_DMA_CH10, @@ -63,6 +72,20 @@ const static u8 dma_irq[OMAP_LOGICAL_DMA_CH_COUNT] = { INT_1610_DMA_CH14, INT_1610_DMA_CH15, INT_DMA_LCD }; +#define REVISIT_24XX() printk(KERN_ERR "FIXME: no %s on 24xx\n", \ + __FUNCTION__); + +#ifdef CONFIG_ARCH_OMAP15XX +/* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */ +int omap_dma_in_1510_mode(void) +{ + return enable_1510_mode; +} +#else +#define omap_dma_in_1510_mode() 0 +#endif + +#ifdef CONFIG_ARCH_OMAP1 static inline int get_gdma_dev(int req) { u32 reg = OMAP_FUNC_MUX_ARM_BASE + ((req - 1) / 5) * 4; @@ -82,6 +105,9 @@ static inline void set_gdma_dev(int req, int dev) l |= (dev - 1) << shift; omap_writel(l, reg); } +#else +#define set_gdma_dev(req, dev) do {} while (0) +#endif static void clear_lch_regs(int lch) { @@ -121,38 +147,62 @@ void omap_set_dma_priority(int dst_port, int priority) } void omap_set_dma_transfer_params(int lch, int data_type, int elem_count, - int frame_count, int sync_mode) + int frame_count, int sync_mode, + int dma_trigger, int src_or_dst_synch) { - u16 w; + OMAP_DMA_CSDP_REG(lch) &= ~0x03; + OMAP_DMA_CSDP_REG(lch) |= data_type; - w = omap_readw(OMAP_DMA_CSDP(lch)); - w &= ~0x03; - w |= data_type; - omap_writew(w, OMAP_DMA_CSDP(lch)); + if (cpu_class_is_omap1()) { + OMAP_DMA_CCR_REG(lch) &= ~(1 << 5); + if (sync_mode == OMAP_DMA_SYNC_FRAME) + OMAP_DMA_CCR_REG(lch) |= 1 << 5; + + OMAP1_DMA_CCR2_REG(lch) &= ~(1 << 2); + if (sync_mode == OMAP_DMA_SYNC_BLOCK) + OMAP1_DMA_CCR2_REG(lch) |= 1 << 2; + } + + if (cpu_is_omap24xx() && dma_trigger) { + u32 val = OMAP_DMA_CCR_REG(lch); + + if (dma_trigger > 63) + val |= 1 << 20; + if (dma_trigger > 31) + val |= 1 << 19; - w = omap_readw(OMAP_DMA_CCR(lch)); - w &= ~(1 << 5); - if (sync_mode == OMAP_DMA_SYNC_FRAME) - w |= 1 << 5; - omap_writew(w, OMAP_DMA_CCR(lch)); + val |= (dma_trigger & 0x1f); - w = omap_readw(OMAP_DMA_CCR2(lch)); - w &= ~(1 << 2); - if (sync_mode == OMAP_DMA_SYNC_BLOCK) - w |= 1 << 2; - omap_writew(w, OMAP_DMA_CCR2(lch)); + if (sync_mode & OMAP_DMA_SYNC_FRAME) + val |= 1 << 5; - omap_writew(elem_count, OMAP_DMA_CEN(lch)); - omap_writew(frame_count, OMAP_DMA_CFN(lch)); + if (sync_mode & OMAP_DMA_SYNC_BLOCK) + val |= 1 << 18; + if (src_or_dst_synch) + val |= 1 << 24; /* source synch */ + else + val &= ~(1 << 24); /* dest synch */ + + OMAP_DMA_CCR_REG(lch) = val; + } + + OMAP_DMA_CEN_REG(lch) = elem_count; + OMAP_DMA_CFN_REG(lch) = frame_count; } + void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color) { u16 w; BUG_ON(omap_dma_in_1510_mode()); - w = omap_readw(OMAP_DMA_CCR2(lch)) & ~0x03; + if (cpu_is_omap24xx()) { + REVISIT_24XX(); + return; + } + + w = OMAP1_DMA_CCR2_REG(lch) & ~0x03; switch (mode) { case OMAP_DMA_CONSTANT_FILL: w |= 0x01; @@ -165,63 +215,84 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color) default: BUG(); } - omap_writew(w, OMAP_DMA_CCR2(lch)); + OMAP1_DMA_CCR2_REG(lch) = w; - w = omap_readw(OMAP_DMA_LCH_CTRL(lch)) & ~0x0f; + w = OMAP1_DMA_LCH_CTRL_REG(lch) & ~0x0f; /* Default is channel type 2D */ if (mode) { - omap_writew((u16)color, OMAP_DMA_COLOR_L(lch)); - omap_writew((u16)(color >> 16), OMAP_DMA_COLOR_U(lch)); + OMAP1_DMA_COLOR_L_REG(lch) = (u16)color; + OMAP1_DMA_COLOR_U_REG(lch) = (u16)(color >> 16); w |= 1; /* Channel type G */ } - omap_writew(w, OMAP_DMA_LCH_CTRL(lch)); + OMAP1_DMA_LCH_CTRL_REG(lch) = w; } - +/* Note that src_port is only for omap1 */ void omap_set_dma_src_params(int lch, int src_port, int src_amode, - unsigned long src_start) + unsigned long src_start, + int src_ei, int src_fi) { - u16 w; + if (cpu_class_is_omap1()) { + OMAP_DMA_CSDP_REG(lch) &= ~(0x1f << 2); + OMAP_DMA_CSDP_REG(lch) |= src_port << 2; + } + + OMAP_DMA_CCR_REG(lch) &= ~(0x03 << 12); + OMAP_DMA_CCR_REG(lch) |= src_amode << 12; + + if (cpu_class_is_omap1()) { + OMAP1_DMA_CSSA_U_REG(lch) = src_start >> 16; + OMAP1_DMA_CSSA_L_REG(lch) = src_start; + } - w = omap_readw(OMAP_DMA_CSDP(lch)); - w &= ~(0x1f << 2); - w |= src_port << 2; - omap_writew(w, OMAP_DMA_CSDP(lch)); + if (cpu_is_omap24xx()) + OMAP2_DMA_CSSA_REG(lch) = src_start; - w = omap_readw(OMAP_DMA_CCR(lch)); - w &= ~(0x03 << 12); - w |= src_amode << 12; - omap_writew(w, OMAP_DMA_CCR(lch)); + OMAP_DMA_CSEI_REG(lch) = src_ei; + OMAP_DMA_CSFI_REG(lch) = src_fi; +} - omap_writew(src_start >> 16, OMAP_DMA_CSSA_U(lch)); - omap_writew(src_start, OMAP_DMA_CSSA_L(lch)); +void omap_set_dma_params(int lch, struct omap_dma_channel_params * params) +{ + omap_set_dma_transfer_params(lch, params->data_type, + params->elem_count, params->frame_count, + params->sync_mode, params->trigger, + params->src_or_dst_synch); + omap_set_dma_src_params(lch, params->src_port, + params->src_amode, params->src_start, + params->src_ei, params->src_fi); + + omap_set_dma_dest_params(lch, params->dst_port, + params->dst_amode, params->dst_start, + params->dst_ei, params->dst_fi); } void omap_set_dma_src_index(int lch, int eidx, int fidx) { - omap_writew(eidx, OMAP_DMA_CSEI(lch)); - omap_writew(fidx, OMAP_DMA_CSFI(lch)); + if (cpu_is_omap24xx()) { + REVISIT_24XX(); + return; + } + OMAP_DMA_CSEI_REG(lch) = eidx; + OMAP_DMA_CSFI_REG(lch) = fidx; } void omap_set_dma_src_data_pack(int lch, int enable) { - u16 w; - - w = omap_readw(OMAP_DMA_CSDP(lch)) & ~(1 << 6); - w |= enable ? (1 << 6) : 0; - omap_writew(w, OMAP_DMA_CSDP(lch)); + OMAP_DMA_CSDP_REG(lch) &= ~(1 << 6); + if (enable) + OMAP_DMA_CSDP_REG(lch) |= (1 << 6); } void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) { - u16 w; + OMAP_DMA_CSDP_REG(lch) &= ~(0x03 << 7); - w = omap_readw(OMAP_DMA_CSDP(lch)) & ~(0x03 << 7); switch (burst_mode) { case OMAP_DMA_DATA_BURST_DIS: break; case OMAP_DMA_DATA_BURST_4: - w |= (0x01 << 7); + OMAP_DMA_CSDP_REG(lch) |= (0x02 << 7); break; case OMAP_DMA_DATA_BURST_8: /* not supported by current hardware @@ -231,110 +302,283 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) default: BUG(); } - omap_writew(w, OMAP_DMA_CSDP(lch)); } +/* Note that dest_port is only for OMAP1 */ void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode, - unsigned long dest_start) + unsigned long dest_start, + int dst_ei, int dst_fi) { - u16 w; + if (cpu_class_is_omap1()) { + OMAP_DMA_CSDP_REG(lch) &= ~(0x1f << 9); + OMAP_DMA_CSDP_REG(lch) |= dest_port << 9; + } - w = omap_readw(OMAP_DMA_CSDP(lch)); - w &= ~(0x1f << 9); - w |= dest_port << 9; - omap_writew(w, OMAP_DMA_CSDP(lch)); + OMAP_DMA_CCR_REG(lch) &= ~(0x03 << 14); + OMAP_DMA_CCR_REG(lch) |= dest_amode << 14; + + if (cpu_class_is_omap1()) { + OMAP1_DMA_CDSA_U_REG(lch) = dest_start >> 16; + OMAP1_DMA_CDSA_L_REG(lch) = dest_start; + } - w = omap_readw(OMAP_DMA_CCR(lch)); - w &= ~(0x03 << 14); - w |= dest_amode << 14; - omap_writew(w, OMAP_DMA_CCR(lch)); + if (cpu_is_omap24xx()) + OMAP2_DMA_CDSA_REG(lch) = dest_start; - omap_writew(dest_start >> 16, OMAP_DMA_CDSA_U(lch)); - omap_writew(dest_start, OMAP_DMA_CDSA_L(lch)); + OMAP_DMA_CDEI_REG(lch) = dst_ei; + OMAP_DMA_CDFI_REG(lch) = dst_fi; } void omap_set_dma_dest_index(int lch, int eidx, int fidx) { - omap_writew(eidx, OMAP_DMA_CDEI(lch)); - omap_writew(fidx, OMAP_DMA_CDFI(lch)); + if (cpu_is_omap24xx()) { + REVISIT_24XX(); + return; + } + OMAP_DMA_CDEI_REG(lch) = eidx; + OMAP_DMA_CDFI_REG(lch) = fidx; } void omap_set_dma_dest_data_pack(int lch, int enable) { - u16 w; - - w = omap_readw(OMAP_DMA_CSDP(lch)) & ~(1 << 13); - w |= enable ? (1 << 13) : 0; - omap_writew(w, OMAP_DMA_CSDP(lch)); + OMAP_DMA_CSDP_REG(lch) &= ~(1 << 13); + if (enable) + OMAP_DMA_CSDP_REG(lch) |= 1 << 13; } void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) { - u16 w; + OMAP_DMA_CSDP_REG(lch) &= ~(0x03 << 14); - w = omap_readw(OMAP_DMA_CSDP(lch)) & ~(0x03 << 14); switch (burst_mode) { case OMAP_DMA_DATA_BURST_DIS: break; case OMAP_DMA_DATA_BURST_4: - w |= (0x01 << 14); + OMAP_DMA_CSDP_REG(lch) |= (0x02 << 14); break; case OMAP_DMA_DATA_BURST_8: - w |= (0x03 << 14); + OMAP_DMA_CSDP_REG(lch) |= (0x03 << 14); break; default: printk(KERN_ERR "Invalid DMA burst mode\n"); BUG(); return; } - omap_writew(w, OMAP_DMA_CSDP(lch)); } -static inline void init_intr(int lch) +static inline void omap_enable_channel_irq(int lch) { - u16 w; + u32 status; /* Read CSR to make sure it's cleared. */ - w = omap_readw(OMAP_DMA_CSR(lch)); + status = OMAP_DMA_CSR_REG(lch); + /* Enable some nice interrupts. */ - omap_writew(dma_chan[lch].enabled_irqs, OMAP_DMA_CICR(lch)); + OMAP_DMA_CICR_REG(lch) = dma_chan[lch].enabled_irqs; + dma_chan[lch].flags |= OMAP_DMA_ACTIVE; } -static inline void enable_lnk(int lch) +static void omap_disable_channel_irq(int lch) { - u16 w; + if (cpu_is_omap24xx()) + OMAP_DMA_CICR_REG(lch) = 0; +} + +void omap_enable_dma_irq(int lch, u16 bits) +{ + dma_chan[lch].enabled_irqs |= bits; +} - /* Clear the STOP_LNK bits */ - w = omap_readw(OMAP_DMA_CLNK_CTRL(lch)); - w &= ~(1 << 14); - omap_writew(w, OMAP_DMA_CLNK_CTRL(lch)); +void omap_disable_dma_irq(int lch, u16 bits) +{ + dma_chan[lch].enabled_irqs &= ~bits; +} + +static inline void enable_lnk(int lch) +{ + if (cpu_class_is_omap1()) + OMAP_DMA_CLNK_CTRL_REG(lch) &= ~(1 << 14); - /* And set the ENABLE_LNK bits */ + /* Set the ENABLE_LNK bits */ if (dma_chan[lch].next_lch != -1) - omap_writew(dma_chan[lch].next_lch | (1 << 15), - OMAP_DMA_CLNK_CTRL(lch)); + OMAP_DMA_CLNK_CTRL_REG(lch) = + dma_chan[lch].next_lch | (1 << 15); } static inline void disable_lnk(int lch) { - u16 w; - /* Disable interrupts */ - omap_writew(0, OMAP_DMA_CICR(lch)); + if (cpu_class_is_omap1()) { + OMAP_DMA_CICR_REG(lch) = 0; + /* Set the STOP_LNK bit */ + OMAP_DMA_CLNK_CTRL_REG(lch) |= 1 << 14; + } - /* Set the STOP_LNK bit */ - w = omap_readw(OMAP_DMA_CLNK_CTRL(lch)); - w |= (1 << 14); - w = omap_writew(w, OMAP_DMA_CLNK_CTRL(lch)); + if (cpu_is_omap24xx()) { + omap_disable_channel_irq(lch); + /* Clear the ENABLE_LNK bit */ + OMAP_DMA_CLNK_CTRL_REG(lch) &= ~(1 << 15); + } dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE; } -void omap_start_dma(int lch) +static inline void omap2_enable_irq_lch(int lch) { - u16 w; + u32 val; + + if (!cpu_is_omap24xx()) + return; + + val = omap_readl(OMAP_DMA4_IRQENABLE_L0); + val |= 1 << lch; + omap_writel(val, OMAP_DMA4_IRQENABLE_L0); +} + +int omap_request_dma(int dev_id, const char *dev_name, + void (* callback)(int lch, u16 ch_status, void *data), + void *data, int *dma_ch_out) +{ + int ch, free_ch = -1; + unsigned long flags; + struct omap_dma_lch *chan; + + spin_lock_irqsave(&dma_chan_lock, flags); + for (ch = 0; ch < dma_chan_count; ch++) { + if (free_ch == -1 && dma_chan[ch].dev_id == -1) { + free_ch = ch; + if (dev_id == 0) + break; + } + } + if (free_ch == -1) { + spin_unlock_irqrestore(&dma_chan_lock, flags); + return -EBUSY; + } + chan = dma_chan + free_ch; + chan->dev_id = dev_id; + + if (cpu_class_is_omap1()) + clear_lch_regs(free_ch); + if (cpu_is_omap24xx()) + omap_clear_dma(free_ch); + + spin_unlock_irqrestore(&dma_chan_lock, flags); + + chan->dev_name = dev_name; + chan->callback = callback; + chan->data = data; + chan->enabled_irqs = OMAP_DMA_TOUT_IRQ | OMAP_DMA_DROP_IRQ | + OMAP_DMA_BLOCK_IRQ; + + if (cpu_is_omap24xx()) + chan->enabled_irqs |= OMAP2_DMA_TRANS_ERR_IRQ; + + if (cpu_is_omap16xx()) { + /* If the sync device is set, configure it dynamically. */ + if (dev_id != 0) { + set_gdma_dev(free_ch + 1, dev_id); + dev_id = free_ch + 1; + } + /* Disable the 1510 compatibility mode and set the sync device + * id. */ + OMAP_DMA_CCR_REG(free_ch) = dev_id | (1 << 10); + } else if (cpu_is_omap730() || cpu_is_omap15xx()) { + OMAP_DMA_CCR_REG(free_ch) = dev_id; + } + + if (cpu_is_omap24xx()) { + omap2_enable_irq_lch(free_ch); + + omap_enable_channel_irq(free_ch); + /* Clear the CSR register and IRQ status register */ + OMAP_DMA_CSR_REG(free_ch) = 0x0; + omap_writel(~0x0, OMAP_DMA4_IRQSTATUS_L0); + } + + *dma_ch_out = free_ch; + + return 0; +} + +void omap_free_dma(int lch) +{ + unsigned long flags; + + spin_lock_irqsave(&dma_chan_lock, flags); + if (dma_chan[lch].dev_id == -1) { + printk("omap_dma: trying to free nonallocated DMA channel %d\n", + lch); + spin_unlock_irqrestore(&dma_chan_lock, flags); + return; + } + dma_chan[lch].dev_id = -1; + dma_chan[lch].next_lch = -1; + dma_chan[lch].callback = NULL; + spin_unlock_irqrestore(&dma_chan_lock, flags); + + if (cpu_class_is_omap1()) { + /* Disable all DMA interrupts for the channel. */ + OMAP_DMA_CICR_REG(lch) = 0; + /* Make sure the DMA transfer is stopped. */ + OMAP_DMA_CCR_REG(lch) = 0; + } + + if (cpu_is_omap24xx()) { + u32 val; + /* Disable interrupts */ + val = omap_readl(OMAP_DMA4_IRQENABLE_L0); + val &= ~(1 << lch); + omap_writel(val, OMAP_DMA4_IRQENABLE_L0); + + /* Clear the CSR register and IRQ status register */ + OMAP_DMA_CSR_REG(lch) = 0x0; + + val = omap_readl(OMAP_DMA4_IRQSTATUS_L0); + val |= 1 << lch; + omap_writel(val, OMAP_DMA4_IRQSTATUS_L0); + + /* Disable all DMA interrupts for the channel. */ + OMAP_DMA_CICR_REG(lch) = 0; + + /* Make sure the DMA transfer is stopped. */ + OMAP_DMA_CCR_REG(lch) = 0; + omap_clear_dma(lch); + } +} + +/* + * Clears any DMA state so the DMA engine is ready to restart with new buffers + * through omap_start_dma(). Any buffers in flight are discarded. + */ +void omap_clear_dma(int lch) +{ + unsigned long flags; + + local_irq_save(flags); + + if (cpu_class_is_omap1()) { + int status; + OMAP_DMA_CCR_REG(lch) &= ~OMAP_DMA_CCR_EN; + + /* Clear pending interrupts */ + status = OMAP_DMA_CSR_REG(lch); + } + + if (cpu_is_omap24xx()) { + int i; + u32 lch_base = OMAP24XX_DMA_BASE + lch * 0x60 + 0x80; + for (i = 0; i < 0x44; i += 4) + omap_writel(0, lch_base + i); + } + + local_irq_restore(flags); +} + +void omap_start_dma(int lch) +{ if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) { int next_lch, cur_lch; char dma_chan_link_map[OMAP_LOGICAL_DMA_CH_COUNT]; @@ -348,31 +592,37 @@ void omap_start_dma(int lch) do { next_lch = dma_chan[cur_lch].next_lch; - /* The loop case: we've been here already */ + /* The loop case: we've been here already */ if (dma_chan_link_map[cur_lch]) break; /* Mark the current channel */ dma_chan_link_map[cur_lch] = 1; enable_lnk(cur_lch); - init_intr(cur_lch); + omap_enable_channel_irq(cur_lch); cur_lch = next_lch; } while (next_lch != -1); + } else if (cpu_is_omap24xx()) { + /* Errata: Need to write lch even if not using chaining */ + OMAP_DMA_CLNK_CTRL_REG(lch) = lch; } - init_intr(lch); + omap_enable_channel_irq(lch); + + /* Errata: On ES2.0 BUFFERING disable must be set. + * This will always fail on ES1.0 */ + if (cpu_is_omap24xx()) { + OMAP_DMA_CCR_REG(lch) |= OMAP_DMA_CCR_EN; + } + + OMAP_DMA_CCR_REG(lch) |= OMAP_DMA_CCR_EN; - w = omap_readw(OMAP_DMA_CCR(lch)); - w |= OMAP_DMA_CCR_EN; - omap_writew(w, OMAP_DMA_CCR(lch)); dma_chan[lch].flags |= OMAP_DMA_ACTIVE; } void omap_stop_dma(int lch) { - u16 w; - if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) { int next_lch, cur_lch = lch; char dma_chan_link_map[OMAP_LOGICAL_DMA_CH_COUNT]; @@ -393,146 +643,83 @@ void omap_stop_dma(int lch) return; } + /* Disable all interrupts on the channel */ - omap_writew(0, OMAP_DMA_CICR(lch)); + if (cpu_class_is_omap1()) + OMAP_DMA_CICR_REG(lch) = 0; - w = omap_readw(OMAP_DMA_CCR(lch)); - w &= ~OMAP_DMA_CCR_EN; - omap_writew(w, OMAP_DMA_CCR(lch)); + OMAP_DMA_CCR_REG(lch) &= ~OMAP_DMA_CCR_EN; dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE; } -void omap_enable_dma_irq(int lch, u16 bits) +/* + * Returns current physical source address for the given DMA channel. + * If the channel is running the caller must disable interrupts prior calling + * this function and process the returned value before re-enabling interrupt to + * prevent races with the interrupt handler. Note that in continuous mode there + * is a chance for CSSA_L register overflow inbetween the two reads resulting + * in incorrect return value. + */ +dma_addr_t omap_get_dma_src_pos(int lch) { - dma_chan[lch].enabled_irqs |= bits; -} + dma_addr_t offset; -void omap_disable_dma_irq(int lch, u16 bits) -{ - dma_chan[lch].enabled_irqs &= ~bits; -} + if (cpu_class_is_omap1()) + offset = (dma_addr_t) (OMAP1_DMA_CSSA_L_REG(lch) | + (OMAP1_DMA_CSSA_U_REG(lch) << 16)); -static int dma_handle_ch(int ch) -{ - u16 csr; + if (cpu_is_omap24xx()) + offset = OMAP_DMA_CSAC_REG(lch); - if (enable_1510_mode && ch >= 6) { - csr = dma_chan[ch].saved_csr; - dma_chan[ch].saved_csr = 0; - } else - csr = omap_readw(OMAP_DMA_CSR(ch)); - if (enable_1510_mode && ch <= 2 && (csr >> 7) != 0) { - dma_chan[ch + 6].saved_csr = csr >> 7; - csr &= 0x7f; - } - if ((csr & 0x3f) == 0) - return 0; - if (unlikely(dma_chan[ch].dev_id == -1)) { - printk(KERN_WARNING "Spurious interrupt from DMA channel %d (CSR %04x)\n", - ch, csr); - return 0; - } - if (unlikely(csr & OMAP_DMA_TOUT_IRQ)) - printk(KERN_WARNING "DMA timeout with device %d\n", dma_chan[ch].dev_id); - if (unlikely(csr & OMAP_DMA_DROP_IRQ)) - printk(KERN_WARNING "DMA synchronization event drop occurred with device %d\n", - dma_chan[ch].dev_id); - if (likely(csr & OMAP_DMA_BLOCK_IRQ)) - dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE; - if (likely(dma_chan[ch].callback != NULL)) - dma_chan[ch].callback(ch, csr, dma_chan[ch].data); - return 1; + return offset; } -static irqreturn_t dma_irq_handler(int irq, void *dev_id, struct pt_regs *regs) +/* + * Returns current physical destination address for the given DMA channel. + * If the channel is running the caller must disable interrupts prior calling + * this function and process the returned value before re-enabling interrupt to + * prevent races with the interrupt handler. Note that in continuous mode there + * is a chance for CDSA_L register overflow inbetween the two reads resulting + * in incorrect return value. + */ +dma_addr_t omap_get_dma_dst_pos(int lch) { - int ch = ((int) dev_id) - 1; - int handled = 0; + dma_addr_t offset; - for (;;) { - int handled_now = 0; + if (cpu_class_is_omap1()) + offset = (dma_addr_t) (OMAP1_DMA_CDSA_L_REG(lch) | + (OMAP1_DMA_CDSA_U_REG(lch) << 16)); - handled_now += dma_handle_ch(ch); - if (enable_1510_mode && dma_chan[ch + 6].saved_csr) - handled_now += dma_handle_ch(ch + 6); - if (!handled_now) - break; - handled += handled_now; - } + if (cpu_is_omap24xx()) + offset = OMAP2_DMA_CDSA_REG(lch); - return handled ? IRQ_HANDLED : IRQ_NONE; + return offset; } -int omap_request_dma(int dev_id, const char *dev_name, - void (* callback)(int lch, u16 ch_status, void *data), - void *data, int *dma_ch_out) +/* + * Returns current source transfer counting for the given DMA channel. + * Can be used to monitor the progress of a transfer inside a block. + * It must be called with disabled interrupts. + */ +int omap_get_dma_src_addr_counter(int lch) { - int ch, free_ch = -1; - unsigned long flags; - struct omap_dma_lch *chan; - - spin_lock_irqsave(&dma_chan_lock, flags); - for (ch = 0; ch < dma_chan_count; ch++) { - if (free_ch == -1 && dma_chan[ch].dev_id == -1) { - free_ch = ch; - if (dev_id == 0) - break; - } - } - if (free_ch == -1) { - spin_unlock_irqrestore(&dma_chan_lock, flags); - return -EBUSY; - } - chan = dma_chan + free_ch; - chan->dev_id = dev_id; - clear_lch_regs(free_ch); - spin_unlock_irqrestore(&dma_chan_lock, flags); - - chan->dev_id = dev_id; - chan->dev_name = dev_name; - chan->callback = callback; - chan->data = data; - chan->enabled_irqs = OMAP_DMA_TOUT_IRQ | OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ; - - if (cpu_is_omap16xx()) { - /* If the sync device is set, configure it dynamically. */ - if (dev_id != 0) { - set_gdma_dev(free_ch + 1, dev_id); - dev_id = free_ch + 1; - } - /* Disable the 1510 compatibility mode and set the sync device - * id. */ - omap_writew(dev_id | (1 << 10), OMAP_DMA_CCR(free_ch)); - } else { - omap_writew(dev_id, OMAP_DMA_CCR(free_ch)); - } - *dma_ch_out = free_ch; - - return 0; + return (dma_addr_t) OMAP_DMA_CSAC_REG(lch); } -void omap_free_dma(int ch) +int omap_dma_running(void) { - unsigned long flags; + int lch; - spin_lock_irqsave(&dma_chan_lock, flags); - if (dma_chan[ch].dev_id == -1) { - printk("omap_dma: trying to free nonallocated DMA channel %d\n", ch); - spin_unlock_irqrestore(&dma_chan_lock, flags); - return; - } - dma_chan[ch].dev_id = -1; - spin_unlock_irqrestore(&dma_chan_lock, flags); + /* Check if LCD DMA is running */ + if (cpu_is_omap16xx()) + if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN) + return 1; - /* Disable all DMA interrupts for the channel. */ - omap_writew(0, OMAP_DMA_CICR(ch)); - /* Make sure the DMA transfer is stopped. */ - omap_writew(0, OMAP_DMA_CCR(ch)); -} + for (lch = 0; lch < dma_chan_count; lch++) + if (OMAP_DMA_CCR_REG(lch) & OMAP_DMA_CCR_EN) + return 1; -int omap_dma_in_1510_mode(void) -{ - return enable_1510_mode; + return 0; } /* @@ -550,7 +737,8 @@ void omap_dma_link_lch (int lch_head, int lch_queue) if ((dma_chan[lch_head].dev_id == -1) || (dma_chan[lch_queue].dev_id == -1)) { - printk(KERN_ERR "omap_dma: trying to link non requested channels\n"); + printk(KERN_ERR "omap_dma: trying to link " + "non requested channels\n"); dump_stack(); } @@ -570,20 +758,149 @@ void omap_dma_unlink_lch (int lch_head, int lch_queue) if (dma_chan[lch_head].next_lch != lch_queue || dma_chan[lch_head].next_lch == -1) { - printk(KERN_ERR "omap_dma: trying to unlink non linked channels\n"); + printk(KERN_ERR "omap_dma: trying to unlink " + "non linked channels\n"); dump_stack(); } if ((dma_chan[lch_head].flags & OMAP_DMA_ACTIVE) || (dma_chan[lch_head].flags & OMAP_DMA_ACTIVE)) { - printk(KERN_ERR "omap_dma: You need to stop the DMA channels before unlinking\n"); + printk(KERN_ERR "omap_dma: You need to stop the DMA channels " + "before unlinking\n"); dump_stack(); } dma_chan[lch_head].next_lch = -1; } +/*----------------------------------------------------------------------------*/ + +#ifdef CONFIG_ARCH_OMAP1 + +static int omap1_dma_handle_ch(int ch) +{ + u16 csr; + + if (enable_1510_mode && ch >= 6) { + csr = dma_chan[ch].saved_csr; + dma_chan[ch].saved_csr = 0; + } else + csr = OMAP_DMA_CSR_REG(ch); + if (enable_1510_mode && ch <= 2 && (csr >> 7) != 0) { + dma_chan[ch + 6].saved_csr = csr >> 7; + csr &= 0x7f; + } + if ((csr & 0x3f) == 0) + return 0; + if (unlikely(dma_chan[ch].dev_id == -1)) { + printk(KERN_WARNING "Spurious interrupt from DMA channel " + "%d (CSR %04x)\n", ch, csr); + return 0; + } + if (unlikely(csr & OMAP_DMA_TOUT_IRQ)) + printk(KERN_WARNING "DMA timeout with device %d\n", + dma_chan[ch].dev_id); + if (unlikely(csr & OMAP_DMA_DROP_IRQ)) + printk(KERN_WARNING "DMA synchronization event drop occurred " + "with device %d\n", dma_chan[ch].dev_id); + if (likely(csr & OMAP_DMA_BLOCK_IRQ)) + dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE; + if (likely(dma_chan[ch].callback != NULL)) + dma_chan[ch].callback(ch, csr, dma_chan[ch].data); + return 1; +} + +static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id, + struct pt_regs *regs) +{ + int ch = ((int) dev_id) - 1; + int handled = 0; + + for (;;) { + int handled_now = 0; + + handled_now += omap1_dma_handle_ch(ch); + if (enable_1510_mode && dma_chan[ch + 6].saved_csr) + handled_now += omap1_dma_handle_ch(ch + 6); + if (!handled_now) + break; + handled += handled_now; + } + + return handled ? IRQ_HANDLED : IRQ_NONE; +} + +#else +#define omap1_dma_irq_handler NULL +#endif + +#ifdef CONFIG_ARCH_OMAP2 + +static int omap2_dma_handle_ch(int ch) +{ + u32 status = OMAP_DMA_CSR_REG(ch); + u32 val; + + if (!status) + return 0; + if (unlikely(dma_chan[ch].dev_id == -1)) + return 0; + /* REVISIT: According to 24xx TRM, there's no TOUT_IE */ + if (unlikely(status & OMAP_DMA_TOUT_IRQ)) + printk(KERN_INFO "DMA timeout with device %d\n", + dma_chan[ch].dev_id); + if (unlikely(status & OMAP_DMA_DROP_IRQ)) + printk(KERN_INFO + "DMA synchronization event drop occurred with device " + "%d\n", dma_chan[ch].dev_id); + + if (unlikely(status & OMAP2_DMA_TRANS_ERR_IRQ)) + printk(KERN_INFO "DMA transaction error with device %d\n", + dma_chan[ch].dev_id); + + OMAP_DMA_CSR_REG(ch) = 0x20; + + val = omap_readl(OMAP_DMA4_IRQSTATUS_L0); + /* ch in this function is from 0-31 while in register it is 1-32 */ + val = 1 << (ch); + omap_writel(val, OMAP_DMA4_IRQSTATUS_L0); + + if (likely(dma_chan[ch].callback != NULL)) + dma_chan[ch].callback(ch, status, dma_chan[ch].data); + + return 0; +} + +/* STATUS register count is from 1-32 while our is 0-31 */ +static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id, + struct pt_regs *regs) +{ + u32 val; + int i; + + val = omap_readl(OMAP_DMA4_IRQSTATUS_L0); + + for (i = 1; i <= OMAP_LOGICAL_DMA_CH_COUNT; i++) { + int active = val & (1 << (i - 1)); + if (active) + omap2_dma_handle_ch(i - 1); + } + + return IRQ_HANDLED; +} + +static struct irqaction omap24xx_dma_irq = { + .name = "DMA", + .handler = omap2_dma_irq_handler, + .flags = SA_INTERRUPT +}; + +#else +static struct irqaction omap24xx_dma_irq; +#endif + +/*----------------------------------------------------------------------------*/ static struct lcd_dma_info { spinlock_t lock; @@ -795,7 +1112,7 @@ static void set_b1_regs(void) /* Always set the source port as SDRAM for now*/ w &= ~(0x03 << 6); if (lcd_dma.callback != NULL) - w |= 1 << 1; /* Block interrupt enable */ + w |= 1 << 1; /* Block interrupt enable */ else w &= ~(1 << 1); omap_writew(w, OMAP1610_DMA_LCD_CTRL); @@ -814,7 +1131,8 @@ static void set_b1_regs(void) omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L); } -static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id, + struct pt_regs *regs) { u16 w; @@ -870,7 +1188,8 @@ void omap_free_lcd_dma(void) return; } if (!enable_1510_mode) - omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1, OMAP1610_DMA_LCD_CCR); + omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1, + OMAP1610_DMA_LCD_CCR); lcd_dma.reserved = 0; spin_unlock(&lcd_dma.lock); } @@ -939,93 +1258,24 @@ void omap_stop_lcd_dma(void) omap_writew(w, OMAP1610_DMA_LCD_CTRL); } -/* - * Clears any DMA state so the DMA engine is ready to restart with new buffers - * through omap_start_dma(). Any buffers in flight are discarded. - */ -void omap_clear_dma(int lch) -{ - unsigned long flags; - int status; - - local_irq_save(flags); - omap_writew(omap_readw(OMAP_DMA_CCR(lch)) & ~OMAP_DMA_CCR_EN, - OMAP_DMA_CCR(lch)); - status = OMAP_DMA_CSR(lch); /* clear pending interrupts */ - local_irq_restore(flags); -} - -/* - * Returns current physical source address for the given DMA channel. - * If the channel is running the caller must disable interrupts prior calling - * this function and process the returned value before re-enabling interrupt to - * prevent races with the interrupt handler. Note that in continuous mode there - * is a chance for CSSA_L register overflow inbetween the two reads resulting - * in incorrect return value. - */ -dma_addr_t omap_get_dma_src_pos(int lch) -{ - return (dma_addr_t) (omap_readw(OMAP_DMA_CSSA_L(lch)) | - (omap_readw(OMAP_DMA_CSSA_U(lch)) << 16)); -} - -/* - * Returns current physical destination address for the given DMA channel. - * If the channel is running the caller must disable interrupts prior calling - * this function and process the returned value before re-enabling interrupt to - * prevent races with the interrupt handler. Note that in continuous mode there - * is a chance for CDSA_L register overflow inbetween the two reads resulting - * in incorrect return value. - */ -dma_addr_t omap_get_dma_dst_pos(int lch) -{ - return (dma_addr_t) (omap_readw(OMAP_DMA_CDSA_L(lch)) | - (omap_readw(OMAP_DMA_CDSA_U(lch)) << 16)); -} - -/* - * Returns current source transfer counting for the given DMA channel. - * Can be used to monitor the progress of a transfer inside a block. - * It must be called with disabled interrupts. - */ -int omap_get_dma_src_addr_counter(int lch) -{ - return (dma_addr_t) omap_readw(OMAP_DMA_CSAC(lch)); -} - -int omap_dma_running(void) -{ - int lch; - - /* Check if LCD DMA is running */ - if (cpu_is_omap16xx()) - if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN) - return 1; - - for (lch = 0; lch < dma_chan_count; lch++) { - u16 w; - - w = omap_readw(OMAP_DMA_CCR(lch)); - if (w & OMAP_DMA_CCR_EN) - return 1; - } - return 0; -} +/*----------------------------------------------------------------------------*/ static int __init omap_init_dma(void) { int ch, r; - if (cpu_is_omap1510()) { - printk(KERN_INFO "DMA support for OMAP1510 initialized\n"); + if (cpu_is_omap15xx()) { + printk(KERN_INFO "DMA support for OMAP15xx initialized\n"); dma_chan_count = 9; enable_1510_mode = 1; } else if (cpu_is_omap16xx() || cpu_is_omap730()) { printk(KERN_INFO "OMAP DMA hardware version %d\n", omap_readw(OMAP_DMA_HW_ID)); printk(KERN_INFO "DMA capabilities: %08x:%08x:%04x:%04x:%04x\n", - (omap_readw(OMAP_DMA_CAPS_0_U) << 16) | omap_readw(OMAP_DMA_CAPS_0_L), - (omap_readw(OMAP_DMA_CAPS_1_U) << 16) | omap_readw(OMAP_DMA_CAPS_1_L), + (omap_readw(OMAP_DMA_CAPS_0_U) << 16) | + omap_readw(OMAP_DMA_CAPS_0_L), + (omap_readw(OMAP_DMA_CAPS_1_U) << 16) | + omap_readw(OMAP_DMA_CAPS_1_L), omap_readw(OMAP_DMA_CAPS_2), omap_readw(OMAP_DMA_CAPS_3), omap_readw(OMAP_DMA_CAPS_4)); if (!enable_1510_mode) { @@ -1038,6 +1288,11 @@ static int __init omap_init_dma(void) dma_chan_count = 16; } else dma_chan_count = 9; + } else if (cpu_is_omap24xx()) { + u8 revision = omap_readb(OMAP_DMA4_REVISION); + printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n", + revision >> 4, revision & 0xf); + dma_chan_count = OMAP_LOGICAL_DMA_CH_COUNT; } else { dma_chan_count = 0; return 0; @@ -1049,41 +1304,56 @@ static int __init omap_init_dma(void) memset(&dma_chan, 0, sizeof(dma_chan)); for (ch = 0; ch < dma_chan_count; ch++) { + omap_clear_dma(ch); dma_chan[ch].dev_id = -1; dma_chan[ch].next_lch = -1; if (ch >= 6 && enable_1510_mode) continue; - /* request_irq() doesn't like dev_id (ie. ch) being zero, - * so we have to kludge around this. */ - r = request_irq(dma_irq[ch], dma_irq_handler, 0, "DMA", - (void *) (ch + 1)); + if (cpu_class_is_omap1()) { + /* request_irq() doesn't like dev_id (ie. ch) being + * zero, so we have to kludge around this. */ + r = request_irq(omap1_dma_irq[ch], + omap1_dma_irq_handler, 0, "DMA", + (void *) (ch + 1)); + if (r != 0) { + int i; + + printk(KERN_ERR "unable to request IRQ %d " + "for DMA (error %d)\n", + omap1_dma_irq[ch], r); + for (i = 0; i < ch; i++) + free_irq(omap1_dma_irq[i], + (void *) (i + 1)); + return r; + } + } + } + + if (cpu_is_omap24xx()) + setup_irq(INT_24XX_SDMA_IRQ0, &omap24xx_dma_irq); + + /* FIXME: Update LCD DMA to work on 24xx */ + if (cpu_class_is_omap1()) { + r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0, + "LCD DMA", NULL); if (r != 0) { int i; - printk(KERN_ERR "unable to request IRQ %d for DMA (error %d)\n", - dma_irq[ch], r); - for (i = 0; i < ch; i++) - free_irq(dma_irq[i], (void *) (i + 1)); + printk(KERN_ERR "unable to request IRQ for LCD DMA " + "(error %d)\n", r); + for (i = 0; i < dma_chan_count; i++) + free_irq(omap1_dma_irq[i], (void *) (i + 1)); return r; } } - r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0, "LCD DMA", NULL); - if (r != 0) { - int i; - printk(KERN_ERR "unable to request IRQ for LCD DMA (error %d)\n", r); - for (i = 0; i < dma_chan_count; i++) - free_irq(dma_irq[i], (void *) (i + 1)); - return r; - } return 0; } arch_initcall(omap_init_dma); - EXPORT_SYMBOL(omap_get_dma_src_pos); EXPORT_SYMBOL(omap_get_dma_dst_pos); EXPORT_SYMBOL(omap_get_dma_src_addr_counter); @@ -1109,6 +1379,8 @@ EXPORT_SYMBOL(omap_set_dma_dest_index); EXPORT_SYMBOL(omap_set_dma_dest_data_pack); EXPORT_SYMBOL(omap_set_dma_dest_burst_mode); +EXPORT_SYMBOL(omap_set_dma_params); + EXPORT_SYMBOL(omap_dma_link_lch); EXPORT_SYMBOL(omap_dma_unlink_lch); diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 55059a24ad41..76f721d85137 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -140,7 +140,7 @@ static struct gpio_bank gpio_bank_1610[5] = { }; #endif -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX static struct gpio_bank gpio_bank_1510[2] = { { OMAP_MPUIO_BASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, { OMAP1510_GPIO_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1510 } @@ -173,7 +173,7 @@ static int gpio_bank_count; static inline struct gpio_bank *get_gpio_bank(int gpio) { -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { if (OMAP_GPIO_IS_MPUIO(gpio)) return &gpio_bank[0]; @@ -222,7 +222,7 @@ static inline int gpio_valid(int gpio) return -1; return 0; } -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510() && gpio < 16) return 0; #endif @@ -654,7 +654,7 @@ int omap_request_gpio(int gpio) /* Set trigger to none. You need to enable the trigger after request_irq */ _set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE); -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX if (bank->method == METHOD_GPIO_1510) { void __iomem *reg; @@ -739,7 +739,7 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc, bank = (struct gpio_bank *) desc->data; if (bank->method == METHOD_MPUIO) isr_reg = bank->base + OMAP_MPUIO_GPIO_INT; -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX if (bank->method == METHOD_GPIO_1510) isr_reg = bank->base + OMAP1510_GPIO_INT_STATUS; #endif @@ -774,7 +774,7 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc, d = irq_desc + gpio_irq; desc_handle_irq(gpio_irq, d, regs); } - } + } } static void gpio_ack_irq(unsigned int irq) @@ -837,8 +837,9 @@ static struct irqchip mpuio_irq_chip = { .unmask = mpuio_unmask_irq }; -static int initialized = 0; -static struct clk * gpio_ck = NULL; +static int initialized; +static struct clk * gpio_ick; +static struct clk * gpio_fck; static int __init _omap_gpio_init(void) { @@ -848,14 +849,26 @@ static int __init _omap_gpio_init(void) initialized = 1; if (cpu_is_omap1510()) { - gpio_ck = clk_get(NULL, "arm_gpio_ck"); - if (IS_ERR(gpio_ck)) + gpio_ick = clk_get(NULL, "arm_gpio_ck"); + if (IS_ERR(gpio_ick)) printk("Could not get arm_gpio_ck\n"); else - clk_use(gpio_ck); + clk_use(gpio_ick); + } + if (cpu_is_omap24xx()) { + gpio_ick = clk_get(NULL, "gpios_ick"); + if (IS_ERR(gpio_ick)) + printk("Could not get gpios_ick\n"); + else + clk_use(gpio_ick); + gpio_fck = clk_get(NULL, "gpios_fck"); + if (IS_ERR(gpio_ick)) + printk("Could not get gpios_fck\n"); + else + clk_use(gpio_fck); } -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { printk(KERN_INFO "OMAP1510 GPIO hardware\n"); gpio_bank_count = 2; @@ -901,7 +914,7 @@ static int __init _omap_gpio_init(void) if (bank->method == METHOD_MPUIO) { omap_writew(0xFFFF, OMAP_MPUIO_BASE + OMAP_MPUIO_GPIO_MASKIT); } -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX if (bank->method == METHOD_GPIO_1510) { __raw_writew(0xffff, bank->base + OMAP1510_GPIO_INT_MASK); __raw_writew(0x0000, bank->base + OMAP1510_GPIO_INT_STATUS); @@ -1038,6 +1051,7 @@ static struct sys_device omap_gpio_device = { /* * This may get called early from board specific init + * for boards that have interrupts routed via FPGA. */ int omap_gpio_init(void) { diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 9c9b7df3faf6..ea9475c86656 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -491,17 +491,20 @@ int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int leng omap_set_dma_transfer_params(mcbsp[id].dma_tx_lch, OMAP_DMA_DATA_TYPE_S16, length >> 1, 1, - OMAP_DMA_SYNC_ELEMENT); + OMAP_DMA_SYNC_ELEMENT, + 0, 0); omap_set_dma_dest_params(mcbsp[id].dma_tx_lch, OMAP_DMA_PORT_TIPB, OMAP_DMA_AMODE_CONSTANT, - mcbsp[id].io_base + OMAP_MCBSP_REG_DXR1); + mcbsp[id].io_base + OMAP_MCBSP_REG_DXR1, + 0, 0); omap_set_dma_src_params(mcbsp[id].dma_tx_lch, OMAP_DMA_PORT_EMIFF, OMAP_DMA_AMODE_POST_INC, - buffer); + buffer, + 0, 0); omap_start_dma(mcbsp[id].dma_tx_lch); wait_for_completion(&(mcbsp[id].tx_dma_completion)); @@ -531,17 +534,20 @@ int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int leng omap_set_dma_transfer_params(mcbsp[id].dma_rx_lch, OMAP_DMA_DATA_TYPE_S16, length >> 1, 1, - OMAP_DMA_SYNC_ELEMENT); + OMAP_DMA_SYNC_ELEMENT, + 0, 0); omap_set_dma_src_params(mcbsp[id].dma_rx_lch, OMAP_DMA_PORT_TIPB, OMAP_DMA_AMODE_CONSTANT, - mcbsp[id].io_base + OMAP_MCBSP_REG_DRR1); + mcbsp[id].io_base + OMAP_MCBSP_REG_DRR1, + 0, 0); omap_set_dma_dest_params(mcbsp[id].dma_rx_lch, OMAP_DMA_PORT_EMIFF, OMAP_DMA_AMODE_POST_INC, - buffer); + buffer, + 0, 0); omap_start_dma(mcbsp[id].dma_rx_lch); wait_for_completion(&(mcbsp[id].rx_dma_completion)); @@ -643,7 +649,7 @@ static const struct omap_mcbsp_info mcbsp_730[] = { }; #endif -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX static const struct omap_mcbsp_info mcbsp_1510[] = { [0] = { .virt_base = OMAP1510_MCBSP1_BASE, .dma_rx_sync = OMAP_DMA_MCBSP1_RX, @@ -712,7 +718,7 @@ static int __init omap_mcbsp_init(void) mcbsp_count = ARRAY_SIZE(mcbsp_730); } #endif -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { mcbsp_info = mcbsp_1510; mcbsp_count = ARRAY_SIZE(mcbsp_1510); diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c index 64482040f89e..8c1c016aa689 100644 --- a/arch/arm/plat-omap/mux.c +++ b/arch/arm/plat-omap/mux.c @@ -3,7 +3,7 @@ * * Utility to set the Omap MUX and PULL_DWN registers from a table in mux.h * - * Copyright (C) 2003 Nokia Corporation + * Copyright (C) 2003 - 2005 Nokia Corporation * * Written by Tony Lindgren * @@ -25,38 +25,74 @@ #include #include #include +#include #include #include #include - -#define __MUX_C__ #include #ifdef CONFIG_OMAP_MUX +#define OMAP24XX_L4_BASE 0x48000000 +#define OMAP24XX_PULL_ENA (1 << 3) +#define OMAP24XX_PULL_UP (1 << 4) + +static struct pin_config * pin_table; +static unsigned long pin_table_sz; + +extern struct pin_config * omap730_pins; +extern struct pin_config * omap1xxx_pins; +extern struct pin_config * omap24xx_pins; + +int __init omap_mux_register(struct pin_config * pins, unsigned long size) +{ + pin_table = pins; + pin_table_sz = size; + + return 0; +} + /* * Sets the Omap MUX and PULL_DWN registers based on the table */ -int __init_or_module -omap_cfg_reg(const reg_cfg_t reg_cfg) +int __init_or_module omap_cfg_reg(const unsigned long index) { static DEFINE_SPINLOCK(mux_spin_lock); unsigned long flags; - reg_cfg_set *cfg; + struct pin_config *cfg; unsigned int reg_orig = 0, reg = 0, pu_pd_orig = 0, pu_pd = 0, pull_orig = 0, pull = 0; unsigned int mask, warn = 0; - if (cpu_is_omap7xx()) - return 0; + if (!pin_table) + BUG(); - if (reg_cfg > ARRAY_SIZE(reg_cfg_table)) { - printk(KERN_ERR "MUX: reg_cfg %d\n", reg_cfg); - return -EINVAL; + if (index >= pin_table_sz) { + printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n", + index, pin_table_sz); + dump_stack(); + return -ENODEV; } - cfg = (reg_cfg_set *)®_cfg_table[reg_cfg]; + cfg = (struct pin_config *)&pin_table[index]; + if (cpu_is_omap24xx()) { + u8 reg = 0; + + reg |= cfg->mask & 0x7; + if (cfg->pull_val) + reg |= OMAP24XX_PULL_ENA; + if(cfg->pu_pd_val) + reg |= OMAP24XX_PULL_UP; +#ifdef CONFIG_OMAP_MUX_DEBUG + printk("Muxing %s (0x%08x): 0x%02x -> 0x%02x\n", + cfg->name, OMAP24XX_L4_BASE + cfg->mux_reg, + omap_readb(OMAP24XX_L4_BASE + cfg->mux_reg), reg); +#endif + omap_writeb(reg, OMAP24XX_L4_BASE + cfg->mux_reg); + + return 0; + } /* Check the mux register in question */ if (cfg->mux_reg) { @@ -157,7 +193,8 @@ omap_cfg_reg(const reg_cfg_t reg_cfg) return 0; #endif } - EXPORT_SYMBOL(omap_cfg_reg); - +#else +#define omap_mux_init() do {} while(0) +#define omap_cfg_reg(x) do {} while(0) #endif /* CONFIG_OMAP_MUX */ diff --git a/arch/arm/plat-omap/pm.c b/arch/arm/plat-omap/pm.c index e15c6c1ddec9..966cca031ca7 100644 --- a/arch/arm/plat-omap/pm.c +++ b/arch/arm/plat-omap/pm.c @@ -54,11 +54,12 @@ #include #include -#include "clock.h" -#include "sram.h" +#include +#include static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE]; static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE]; +static unsigned int mpui730_sleep_save[MPUI730_SLEEP_SAVE_SIZE]; static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE]; static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE]; @@ -120,8 +121,8 @@ void omap_pm_idle(void) */ static void omap_pm_wakeup_setup(void) { - u32 level1_wake = OMAP_IRQ_BIT(INT_IH2_IRQ); - u32 level2_wake = OMAP_IRQ_BIT(INT_UART2) | OMAP_IRQ_BIT(INT_KEYBOARD); + u32 level1_wake = 0; + u32 level2_wake = OMAP_IRQ_BIT(INT_UART2); /* * Turn off all interrupts except GPIO bank 1, L1-2nd level cascade, @@ -129,19 +130,29 @@ static void omap_pm_wakeup_setup(void) * drivers must still separately call omap_set_gpio_wakeup() to * wake up to a GPIO interrupt. */ - if (cpu_is_omap1510() || cpu_is_omap16xx()) - level1_wake |= OMAP_IRQ_BIT(INT_GPIO_BANK1); - else if (cpu_is_omap730()) - level1_wake |= OMAP_IRQ_BIT(INT_730_GPIO_BANK1); + if (cpu_is_omap730()) + level1_wake = OMAP_IRQ_BIT(INT_730_GPIO_BANK1) | + OMAP_IRQ_BIT(INT_730_IH2_IRQ); + else if (cpu_is_omap1510()) + level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) | + OMAP_IRQ_BIT(INT_1510_IH2_IRQ); + else if (cpu_is_omap16xx()) + level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) | + OMAP_IRQ_BIT(INT_1610_IH2_IRQ); omap_writel(~level1_wake, OMAP_IH1_MIR); - if (cpu_is_omap1510()) + if (cpu_is_omap730()) { + omap_writel(~level2_wake, OMAP_IH2_0_MIR); + omap_writel(~(OMAP_IRQ_BIT(INT_730_WAKE_UP_REQ) | OMAP_IRQ_BIT(INT_730_MPUIO_KEYPAD)), OMAP_IH2_1_MIR); + } else if (cpu_is_omap1510()) { + level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD); omap_writel(~level2_wake, OMAP_IH2_MIR); - - /* INT_1610_WAKE_UP_REQ is needed for GPIO wakeup... */ - if (cpu_is_omap16xx()) { + } else if (cpu_is_omap16xx()) { + level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD); omap_writel(~level2_wake, OMAP_IH2_0_MIR); + + /* INT_1610_WAKE_UP_REQ is needed for GPIO wakeup... */ omap_writel(~OMAP_IRQ_BIT(INT_1610_WAKE_UP_REQ), OMAP_IH2_1_MIR); omap_writel(~0x0, OMAP_IH2_2_MIR); omap_writel(~0x0, OMAP_IH2_3_MIR); @@ -185,7 +196,17 @@ void omap_pm_suspend(void) * Save interrupt, MPUI, ARM and UPLD control registers. */ - if (cpu_is_omap1510()) { + if (cpu_is_omap730()) { + MPUI730_SAVE(OMAP_IH1_MIR); + MPUI730_SAVE(OMAP_IH2_0_MIR); + MPUI730_SAVE(OMAP_IH2_1_MIR); + MPUI730_SAVE(MPUI_CTRL); + MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG); + MPUI730_SAVE(MPUI_DSP_API_CONFIG); + MPUI730_SAVE(EMIFS_CONFIG); + MPUI730_SAVE(EMIFF_SDRAM_CONFIG); + + } else if (cpu_is_omap1510()) { MPUI1510_SAVE(OMAP_IH1_MIR); MPUI1510_SAVE(OMAP_IH2_MIR); MPUI1510_SAVE(MPUI_CTRL); @@ -280,7 +301,13 @@ void omap_pm_suspend(void) ULPD_RESTORE(ULPD_CLOCK_CTRL); ULPD_RESTORE(ULPD_STATUS_REQ); - if (cpu_is_omap1510()) { + if (cpu_is_omap730()) { + MPUI730_RESTORE(EMIFS_CONFIG); + MPUI730_RESTORE(EMIFF_SDRAM_CONFIG); + MPUI730_RESTORE(OMAP_IH1_MIR); + MPUI730_RESTORE(OMAP_IH2_0_MIR); + MPUI730_RESTORE(OMAP_IH2_1_MIR); + } else if (cpu_is_omap1510()) { MPUI1510_RESTORE(MPUI_CTRL); MPUI1510_RESTORE(MPUI_DSP_BOOT_CONFIG); MPUI1510_RESTORE(MPUI_DSP_API_CONFIG); @@ -355,7 +382,14 @@ static int omap_pm_read_proc( ULPD_SAVE(ULPD_DPLL_CTRL); ULPD_SAVE(ULPD_POWER_CTRL); - if (cpu_is_omap1510()) { + if (cpu_is_omap730()) { + MPUI730_SAVE(MPUI_CTRL); + MPUI730_SAVE(MPUI_DSP_STATUS); + MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG); + MPUI730_SAVE(MPUI_DSP_API_CONFIG); + MPUI730_SAVE(EMIFF_SDRAM_CONFIG); + MPUI730_SAVE(EMIFS_CONFIG); + } else if (cpu_is_omap1510()) { MPUI1510_SAVE(MPUI_CTRL); MPUI1510_SAVE(MPUI_DSP_STATUS); MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG); @@ -404,7 +438,21 @@ static int omap_pm_read_proc( ULPD_SHOW(ULPD_STATUS_REQ), ULPD_SHOW(ULPD_POWER_CTRL)); - if (cpu_is_omap1510()) { + if (cpu_is_omap730()) { + my_buffer_offset += sprintf(my_base + my_buffer_offset, + "MPUI730_CTRL_REG 0x%-8x \n" + "MPUI730_DSP_STATUS_REG: 0x%-8x \n" + "MPUI730_DSP_BOOT_CONFIG_REG: 0x%-8x \n" + "MPUI730_DSP_API_CONFIG_REG: 0x%-8x \n" + "MPUI730_SDRAM_CONFIG_REG: 0x%-8x \n" + "MPUI730_EMIFS_CONFIG_REG: 0x%-8x \n", + MPUI730_SHOW(MPUI_CTRL), + MPUI730_SHOW(MPUI_DSP_STATUS), + MPUI730_SHOW(MPUI_DSP_BOOT_CONFIG), + MPUI730_SHOW(MPUI_DSP_API_CONFIG), + MPUI730_SHOW(EMIFF_SDRAM_CONFIG), + MPUI730_SHOW(EMIFS_CONFIG)); + } else if (cpu_is_omap1510()) { my_buffer_offset += sprintf(my_base + my_buffer_offset, "MPUI1510_CTRL_REG 0x%-8x \n" "MPUI1510_DSP_STATUS_REG: 0x%-8x \n" @@ -553,7 +601,12 @@ static int __init omap_pm_init(void) * These routines need to be in SRAM as that's the only * memory the MPU can see when it wakes up. */ - if (cpu_is_omap1510()) { + if (cpu_is_omap730()) { + omap_sram_idle = omap_sram_push(omap730_idle_loop_suspend, + omap730_idle_loop_suspend_sz); + omap_sram_suspend = omap_sram_push(omap730_cpu_suspend, + omap730_cpu_suspend_sz); + } else if (cpu_is_omap1510()) { omap_sram_idle = omap_sram_push(omap1510_idle_loop_suspend, omap1510_idle_loop_suspend_sz); omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend, @@ -572,7 +625,11 @@ static int __init omap_pm_init(void) pm_idle = omap_pm_idle; - setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq); + if (cpu_is_omap730()) + setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq); + else if (cpu_is_omap16xx()) + setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq); + #if 0 /* --- BEGIN BOARD-DEPENDENT CODE --- */ /* Sleepx mask direction */ @@ -591,7 +648,9 @@ static int __init omap_pm_init(void) omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL); /* Configure IDLECT3 */ - if (cpu_is_omap16xx()) + if (cpu_is_omap730()) + omap_writel(OMAP730_IDLECT3_VAL, OMAP730_IDLECT3); + else if (cpu_is_omap16xx()) omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3); pm_set_ops(&omap_pm_ops); @@ -600,8 +659,10 @@ static int __init omap_pm_init(void) omap_pm_init_proc(); #endif - /* configure LOW_PWR pin */ - omap_cfg_reg(T20_1610_LOW_PWR); + if (cpu_is_omap16xx()) { + /* configure LOW_PWR pin */ + omap_cfg_reg(T20_1610_LOW_PWR); + } return 0; } diff --git a/arch/arm/plat-omap/sleep.S b/arch/arm/plat-omap/sleep.S index 9f745836f6aa..4cd7d292f854 100644 --- a/arch/arm/plat-omap/sleep.S +++ b/arch/arm/plat-omap/sleep.S @@ -1,7 +1,7 @@ /* * linux/arch/arm/plat-omap/sleep.S * - * Low-level OMAP1510/1610 sleep/wakeUp support + * Low-level OMAP730/1510/1610 sleep/wakeUp support * * Initial SA1110 code: * Copyright (c) 2001 Cliff Brake @@ -52,7 +52,57 @@ * processor specific functions here. */ -#ifdef CONFIG_ARCH_OMAP1510 +#if defined(CONFIG_ARCH_OMAP730) +ENTRY(omap730_idle_loop_suspend) + + stmfd sp!, {r0 - r12, lr} @ save registers on stack + + @ load base address of ARM_IDLECT1 and ARM_IDLECT2 + mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000 + orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000 + orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00 + + @ turn off clock domains + @ get ARM_IDLECT2 into r2 + ldrh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] + mov r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff + orr r5, r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff00 + strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] + + @ request ARM idle + @ get ARM_IDLECT1 into r1 + ldrh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] + orr r3, r1, #OMAP730_IDLE_LOOP_REQUEST & 0xffff + strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] + + mov r5, #IDLE_WAIT_CYCLES & 0xff + orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00 +l_730: subs r5, r5, #1 + bne l_730 +/* + * Let's wait for the next clock tick to wake us up. + */ + mov r0, #0 + mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt +/* + * omap730_idle_loop_suspend()'s resume point. + * + * It will just start executing here, so we'll restore stuff from the + * stack, reset the ARM_IDLECT1 and ARM_IDLECT2. + */ + + @ restore ARM_IDLECT1 and ARM_IDLECT2 and return + @ r1 has ARM_IDLECT1 and r2 still has ARM_IDLECT2 + strh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] + strh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] + + ldmfd sp!, {r0 - r12, pc} @ restore regs and return + +ENTRY(omap730_idle_loop_suspend_sz) + .word . - omap730_idle_loop_suspend +#endif /* CONFIG_ARCH_OMAP730 */ + +#ifdef CONFIG_ARCH_OMAP15XX ENTRY(omap1510_idle_loop_suspend) stmfd sp!, {r0 - r12, lr} @ save registers on stack @@ -100,7 +150,7 @@ l_1510: subs r5, r5, #1 ENTRY(omap1510_idle_loop_suspend_sz) .word . - omap1510_idle_loop_suspend -#endif /* CONFIG_ARCH_OMAP1510 */ +#endif /* CONFIG_ARCH_OMAP15XX */ #if defined(CONFIG_ARCH_OMAP16XX) ENTRY(omap1610_idle_loop_suspend) @@ -169,7 +219,86 @@ ENTRY(omap1610_idle_loop_suspend_sz) * */ -#ifdef CONFIG_ARCH_OMAP1510 +#if defined(CONFIG_ARCH_OMAP730) +ENTRY(omap730_cpu_suspend) + + @ save registers on stack + stmfd sp!, {r0 - r12, lr} + + @ Drain write cache + mov r4, #0 + mcr p15, 0, r0, c7, c10, 4 + nop + + @ load base address of Traffic Controller + mov r6, #TCMIF_ASM_BASE & 0xff000000 + orr r6, r6, #TCMIF_ASM_BASE & 0x00ff0000 + orr r6, r6, #TCMIF_ASM_BASE & 0x0000ff00 + + @ prepare to put SDRAM into self-refresh manually + ldr r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] + orr r9, r7, #SELF_REFRESH_MODE & 0xff000000 + orr r9, r9, #SELF_REFRESH_MODE & 0x000000ff + str r9, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] + + @ prepare to put EMIFS to Sleep + ldr r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff] + orr r9, r8, #IDLE_EMIFS_REQUEST & 0xff + str r9, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff] + + @ load base address of ARM_IDLECT1 and ARM_IDLECT2 + mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000 + orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000 + orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00 + + @ turn off clock domains + @ do not disable PERCK (0x04) + mov r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff + orr r5, r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff00 + strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] + + @ request ARM idle + mov r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff + orr r3, r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff00 + strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] + + @ disable instruction cache + mrc p15, 0, r9, c1, c0, 0 + bic r2, r9, #0x1000 + mcr p15, 0, r2, c1, c0, 0 + nop + +/* + * Let's wait for the next wake up event to wake us up. r0 can't be + * used here because r0 holds ARM_IDLECT1 + */ + mov r2, #0 + mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt +/* + * omap730_cpu_suspend()'s resume point. + * + * It will just start executing here, so we'll restore stuff from the + * stack. + */ + @ re-enable Icache + mcr p15, 0, r9, c1, c0, 0 + + @ reset the ARM_IDLECT1 and ARM_IDLECT2. + strh r1, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] + strh r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] + + @ Restore EMIFF controls + str r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] + str r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff] + + @ restore regs and return + ldmfd sp!, {r0 - r12, pc} + +ENTRY(omap730_cpu_suspend_sz) + .word . - omap730_cpu_suspend +#endif /* CONFIG_ARCH_OMAP730 */ + +#ifdef CONFIG_ARCH_OMAP15XX ENTRY(omap1510_cpu_suspend) @ save registers on stack @@ -241,7 +370,7 @@ l_1510_2: ENTRY(omap1510_cpu_suspend_sz) .word . - omap1510_cpu_suspend -#endif /* CONFIG_ARCH_OMAP1510 */ +#endif /* CONFIG_ARCH_OMAP15XX */ #if defined(CONFIG_ARCH_OMAP16XX) ENTRY(omap1610_cpu_suspend) diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 7ad69f14a3e7..792f66375830 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -20,10 +20,13 @@ #include #include -#include "sram.h" +#include + +#define OMAP1_SRAM_PA 0x20000000 +#define OMAP1_SRAM_VA 0xd0000000 +#define OMAP2_SRAM_PA 0x40200000 +#define OMAP2_SRAM_VA 0xd0000000 -#define OMAP1_SRAM_BASE 0xd0000000 -#define OMAP1_SRAM_START 0x20000000 #define SRAM_BOOTLOADER_SZ 0x80 static unsigned long omap_sram_base; @@ -31,37 +34,40 @@ static unsigned long omap_sram_size; static unsigned long omap_sram_ceil; /* - * The amount of SRAM depends on the core type: - * 730 = 200K, 1510 = 512K, 5912 = 256K, 1610 = 16K, 1710 = 16K + * The amount of SRAM depends on the core type. * Note that we cannot try to test for SRAM here because writes * to secure SRAM will hang the system. Also the SRAM is not * yet mapped at this point. */ void __init omap_detect_sram(void) { - omap_sram_base = OMAP1_SRAM_BASE; + if (!cpu_is_omap24xx()) + omap_sram_base = OMAP1_SRAM_VA; + else + omap_sram_base = OMAP2_SRAM_VA; if (cpu_is_omap730()) - omap_sram_size = 0x32000; - else if (cpu_is_omap1510()) - omap_sram_size = 0x80000; + omap_sram_size = 0x32000; /* 200K */ + else if (cpu_is_omap15xx()) + omap_sram_size = 0x30000; /* 192K */ else if (cpu_is_omap1610() || cpu_is_omap1621() || cpu_is_omap1710()) - omap_sram_size = 0x4000; + omap_sram_size = 0x4000; /* 16K */ else if (cpu_is_omap1611()) - omap_sram_size = 0x3e800; + omap_sram_size = 0x3e800; /* 250K */ + else if (cpu_is_omap2420()) + omap_sram_size = 0xa0014; /* 640K */ else { printk(KERN_ERR "Could not detect SRAM size\n"); omap_sram_size = 0x4000; } - printk(KERN_INFO "SRAM size: 0x%lx\n", omap_sram_size); omap_sram_ceil = omap_sram_base + omap_sram_size; } static struct map_desc omap_sram_io_desc[] __initdata = { { /* .length gets filled in at runtime */ - .virtual = OMAP1_SRAM_BASE, - .pfn = __phys_to_pfn(OMAP1_SRAM_START), + .virtual = OMAP1_SRAM_VA, + .pfn = __phys_to_pfn(OMAP1_SRAM_PA), .type = MT_DEVICE } }; @@ -76,10 +82,19 @@ void __init omap_map_sram(void) if (omap_sram_size == 0) return; + if (cpu_is_omap24xx()) { + omap_sram_io_desc[0].virtual = OMAP2_SRAM_VA; + omap_sram_io_desc[0].pfn = __phys_to_pfn(OMAP2_SRAM_PA); + } + omap_sram_io_desc[0].length = (omap_sram_size + PAGE_SIZE-1)/PAGE_SIZE; omap_sram_io_desc[0].length *= PAGE_SIZE; iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc)); + printk(KERN_INFO "SRAM: Mapped pa 0x%08lx to va 0x%08lx size: 0x%lx\n", + omap_sram_io_desc[0].pfn, omap_sram_io_desc[0].virtual, + omap_sram_io_desc[0].length); + /* * Looks like we need to preserve some bootloader code at the * beginning of SRAM for jumping to flash for reboot to work... @@ -88,16 +103,6 @@ void __init omap_map_sram(void) omap_sram_size - SRAM_BOOTLOADER_SZ); } -static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl) = NULL; - -void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl) -{ - if (_omap_sram_reprogram_clock == NULL) - panic("Cannot use SRAM"); - - return _omap_sram_reprogram_clock(dpllctl, ckctl); -} - void * omap_sram_push(void * start, unsigned long size) { if (size > (omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ))) { @@ -111,10 +116,94 @@ void * omap_sram_push(void * start, unsigned long size) return (void *)omap_sram_ceil; } -void __init omap_sram_init(void) +static void omap_sram_error(void) +{ + panic("Uninitialized SRAM function\n"); +} + +#ifdef CONFIG_ARCH_OMAP1 + +static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl); + +void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl) +{ + if (!_omap_sram_reprogram_clock) + omap_sram_error(); + + return _omap_sram_reprogram_clock(dpllctl, ckctl); +} + +int __init omap1_sram_init(void) { - omap_detect_sram(); - omap_map_sram(); _omap_sram_reprogram_clock = omap_sram_push(sram_reprogram_clock, sram_reprogram_clock_sz); + + return 0; +} + +#else +#define omap1_sram_init() do {} while (0) +#endif + +#ifdef CONFIG_ARCH_OMAP2 + +static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock); + +void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock) +{ + if (!_omap2_sram_ddr_init) + omap_sram_error(); + + return _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl, + base_cs, force_unlock); +} + +static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val, + u32 mem_type); + +void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type) +{ + if (!_omap2_sram_reprogram_sdrc) + omap_sram_error(); + + return _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type); +} + +static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); + +u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass) +{ + if (!_omap2_set_prcm) + omap_sram_error(); + + return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass); +} + +int __init omap2_sram_init(void) +{ + _omap2_sram_ddr_init = omap_sram_push(sram_ddr_init, sram_ddr_init_sz); + + _omap2_sram_reprogram_sdrc = omap_sram_push(sram_reprogram_sdrc, + sram_reprogram_sdrc_sz); + _omap2_set_prcm = omap_sram_push(sram_set_prcm, sram_set_prcm_sz); + + return 0; +} +#else +#define omap2_sram_init() do {} while (0) +#endif + +int __init omap_sram_init(void) +{ + omap_detect_sram(); + omap_map_sram(); + + if (!cpu_is_omap24xx()) + omap1_sram_init(); + else + omap2_sram_init(); + + return 0; } diff --git a/arch/arm/plat-omap/sram.h b/arch/arm/plat-omap/sram.h deleted file mode 100644 index 71984efa6ae8..000000000000 --- a/arch/arm/plat-omap/sram.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * linux/arch/arm/plat-omap/sram.h - * - * Interface for functions that need to be run in internal SRAM - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_OMAP_SRAM_H -#define __ARCH_ARM_OMAP_SRAM_H - -extern void * omap_sram_push(void * start, unsigned long size); -extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl); - -/* Do not use these */ -extern void sram_reprogram_clock(u32 ckctl, u32 dpllctl); -extern unsigned long sram_reprogram_clock_sz; - -#endif diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c index 205e2d0b826d..00afc7a8c2ab 100644 --- a/arch/arm/plat-omap/usb.c +++ b/arch/arm/plat-omap/usb.c @@ -91,6 +91,8 @@ EXPORT_SYMBOL(otg_set_transceiver); /*-------------------------------------------------------------------------*/ +#if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP15XX) + static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device) { u32 syscon1 = 0; @@ -271,6 +273,8 @@ static u32 __init omap_usb2_init(unsigned nwires, unsigned alt_pingroup) return syscon1 << 24; } +#endif + /*-------------------------------------------------------------------------*/ #if defined(CONFIG_USB_GADGET_OMAP) || \ @@ -494,7 +498,7 @@ static inline void omap_otg_init(struct omap_usb_config *config) {} /*-------------------------------------------------------------------------*/ -#ifdef CONFIG_ARCH_OMAP1510 +#ifdef CONFIG_ARCH_OMAP15XX #define ULPD_DPLL_CTRL_REG __REG16(ULPD_DPLL_CTRL) #define DPLL_IOB (1 << 13) @@ -507,7 +511,6 @@ static inline void omap_otg_init(struct omap_usb_config *config) {} static void __init omap_1510_usb_init(struct omap_usb_config *config) { - int status; unsigned int val; omap_usb0_init(config->pins[0], is_usb0_device(config)); @@ -539,6 +542,8 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config) #ifdef CONFIG_USB_GADGET_OMAP if (config->register_dev) { + int status; + udc_device.dev.platform_data = config; status = platform_device_register(&udc_device); if (status) @@ -549,6 +554,8 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config) #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) if (config->register_host) { + int status; + ohci_device.dev.platform_data = config; status = platform_device_register(&ohci_device); if (status) -- cgit v1.2.2 From 1dbae815a724303b46ab4663b5fc23c13e9d9690 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 10 Nov 2005 14:26:51 +0000 Subject: [ARM] 3145/1: OMAP 3a/5: Add support for omap24xx Patch from Tony Lindgren This patch adds support for omap24xx series of processors. The files live in arch/arm/mach-omap2, and share common files with omap15xx and omap16xx processors in arch/arm/plat-omap. Omap24xx support was originally added for 2.6.9 by TI. This code was then improved and integrated to share common code with omap15xx and omap16xx processors by various omap developers, such as Paul Mundt, Juha Yrjola, Imre Deak, Tony Lindgren, Richard Woodruff, Nishant Menon, Komal Shah et al. Signed-off-by: Tony Lindgren Signed-off-by: Russell King --- arch/arm/Kconfig | 2 + arch/arm/Makefile | 1 + arch/arm/mach-omap2/Kconfig | 22 ++ arch/arm/mach-omap2/Makefile | 13 ++ arch/arm/mach-omap2/Makefile.boot | 3 + arch/arm/mach-omap2/board-generic.c | 80 +++++++ arch/arm/mach-omap2/board-h4.c | 197 +++++++++++++++++ arch/arm/mach-omap2/devices.c | 89 ++++++++ arch/arm/mach-omap2/id.c | 124 +++++++++++ arch/arm/mach-omap2/io.c | 53 +++++ arch/arm/mach-omap2/irq.c | 149 +++++++++++++ arch/arm/mach-omap2/mux.c | 65 ++++++ arch/arm/mach-omap2/prcm.h | 419 ++++++++++++++++++++++++++++++++++++ arch/arm/mach-omap2/serial.c | 180 ++++++++++++++++ arch/arm/mach-omap2/sram-fn.S | 333 ++++++++++++++++++++++++++++ arch/arm/mach-omap2/timer-gp.c | 126 +++++++++++ arch/arm/mm/Kconfig | 2 +- 17 files changed, 1857 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-omap2/Kconfig create mode 100644 arch/arm/mach-omap2/Makefile create mode 100644 arch/arm/mach-omap2/Makefile.boot create mode 100644 arch/arm/mach-omap2/board-generic.c create mode 100644 arch/arm/mach-omap2/board-h4.c create mode 100644 arch/arm/mach-omap2/devices.c create mode 100644 arch/arm/mach-omap2/id.c create mode 100644 arch/arm/mach-omap2/io.c create mode 100644 arch/arm/mach-omap2/irq.c create mode 100644 arch/arm/mach-omap2/mux.c create mode 100644 arch/arm/mach-omap2/prcm.h create mode 100644 arch/arm/mach-omap2/serial.c create mode 100644 arch/arm/mach-omap2/sram-fn.S create mode 100644 arch/arm/mach-omap2/timer-gp.c (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index ec77721507cb..3df7cbd924a1 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -239,6 +239,8 @@ source "arch/arm/plat-omap/Kconfig" source "arch/arm/mach-omap1/Kconfig" +source "arch/arm/mach-omap2/Kconfig" + source "arch/arm/mach-s3c2410/Kconfig" source "arch/arm/mach-lh7a40x/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 114cda7f1b73..81bd2193fe6d 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -93,6 +93,7 @@ textaddr-$(CONFIG_ARCH_FORTUNET) := 0xc0008000 machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx machine-$(CONFIG_ARCH_IXP2000) := ixp2000 machine-$(CONFIG_ARCH_OMAP1) := omap1 + machine-$(CONFIG_ARCH_OMAP2) := omap2 incdir-$(CONFIG_ARCH_OMAP) := omap machine-$(CONFIG_ARCH_S3C2410) := s3c2410 machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig new file mode 100644 index 000000000000..578880943cf2 --- /dev/null +++ b/arch/arm/mach-omap2/Kconfig @@ -0,0 +1,22 @@ +comment "OMAP Core Type" + depends on ARCH_OMAP2 + +config ARCH_OMAP24XX + bool "OMAP24xx Based System" + depends on ARCH_OMAP2 + +config ARCH_OMAP2420 + bool "OMAP2420 support" + depends on ARCH_OMAP24XX + +comment "OMAP Board Type" + depends on ARCH_OMAP2 + +config MACH_OMAP_GENERIC + bool "Generic OMAP board" + depends on ARCH_OMAP2 && ARCH_OMAP24XX + +config MACH_OMAP_H4 + bool "OMAP 2420 H4 board" + depends on ARCH_OMAP2 && ARCH_OMAP24XX + diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile new file mode 100644 index 000000000000..42041166435c --- /dev/null +++ b/arch/arm/mach-omap2/Makefile @@ -0,0 +1,13 @@ +# +# Makefile for the linux kernel. +# + +# Common support +obj-y := irq.o id.o io.o sram-fn.o clock.o mux.o devices.o serial.o + +obj-$(CONFIG_OMAP_MPU_TIMER) += timer-gp.o + +# Specific board support +obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o +obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o + diff --git a/arch/arm/mach-omap2/Makefile.boot b/arch/arm/mach-omap2/Makefile.boot new file mode 100644 index 000000000000..565aff7f37a9 --- /dev/null +++ b/arch/arm/mach-omap2/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0x80008000 +params_phys-y := 0x80000100 +initrd_phys-y := 0x80800000 diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c new file mode 100644 index 000000000000..c602e7a3d93e --- /dev/null +++ b/arch/arm/mach-omap2/board-generic.c @@ -0,0 +1,80 @@ +/* + * linux/arch/arm/mach-omap/omap2/board-generic.c + * + * Copyright (C) 2005 Nokia Corporation + * Author: Paul Mundt + * + * Modified from mach-omap/omap1/board-generic.c + * + * Code for generic OMAP2 board. Should work on many OMAP2 systems where + * the bootloader passes the board-specific data to the kernel. + * Do not put any board specific code to this file; create a new machine + * type if you need custom low-level initializations. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +static void __init omap_generic_init_irq(void) +{ + omap_init_irq(); +} + +static struct omap_uart_config generic_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + +static struct omap_mmc_config generic_mmc_config __initdata = { + .mmc [0] = { + .enabled = 0, + .wire4 = 0, + .wp_pin = -1, + .power_pin = -1, + .switch_pin = -1, + }, +}; + +static struct omap_board_config_kernel generic_config[] = { + { OMAP_TAG_UART, &generic_uart_config }, + { OMAP_TAG_MMC, &generic_mmc_config }, +}; + +static void __init omap_generic_init(void) +{ + omap_board_config = generic_config; + omap_board_config_size = ARRAY_SIZE(generic_config); + omap_serial_init(); +} + +static void __init omap_generic_map_io(void) +{ + omap_map_common_io(); +} + +MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx") + /* Maintainer: Paul Mundt */ + .phys_ram = 0x80000000, + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_generic_map_io, + .init_irq = omap_generic_init_irq, + .init_machine = omap_generic_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c new file mode 100644 index 000000000000..f2554469a76a --- /dev/null +++ b/arch/arm/mach-omap2/board-h4.c @@ -0,0 +1,197 @@ +/* + * linux/arch/arm/mach-omap/omap2/board-h4.c + * + * Copyright (C) 2005 Nokia Corporation + * Author: Paul Mundt + * + * Modified from mach-omap/omap1/board-generic.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include +#include + +static struct mtd_partition h4_partitions[] = { + /* bootloader (U-Boot, etc) in first sector */ + { + .name = "bootloader", + .offset = 0, + .size = SZ_128K, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + /* bootloader params in the next sector */ + { + .name = "params", + .offset = MTDPART_OFS_APPEND, + .size = SZ_128K, + .mask_flags = 0, + }, + /* kernel */ + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_2M, + .mask_flags = 0 + }, + /* file system */ + { + .name = "filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0 + } +}; + +static struct flash_platform_data h4_flash_data = { + .map_name = "cfi_probe", + .width = 2, + .parts = h4_partitions, + .nr_parts = ARRAY_SIZE(h4_partitions), +}; + +static struct resource h4_flash_resource = { + .start = H4_CS0_BASE, + .end = H4_CS0_BASE + SZ_64M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device h4_flash_device = { + .name = "omapflash", + .id = 0, + .dev = { + .platform_data = &h4_flash_data, + }, + .num_resources = 1, + .resource = &h4_flash_resource, +}; + +static struct resource h4_smc91x_resources[] = { + [0] = { + .start = OMAP24XX_ETHR_START, /* Physical */ + .end = OMAP24XX_ETHR_START + 0xf, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ), + .end = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device h4_smc91x_device = { + .name = "smc91x", + .id = -1, + .num_resources = ARRAY_SIZE(h4_smc91x_resources), + .resource = h4_smc91x_resources, +}; + +static struct platform_device *h4_devices[] __initdata = { + &h4_smc91x_device, + &h4_flash_device, +}; + +static inline void __init h4_init_smc91x(void) +{ + /* Make sure CS1 timings are correct */ + GPMC_CONFIG1_1 = 0x00011200; + GPMC_CONFIG2_1 = 0x001f1f01; + GPMC_CONFIG3_1 = 0x00080803; + GPMC_CONFIG4_1 = 0x1c091c09; + GPMC_CONFIG5_1 = 0x041f1f1f; + GPMC_CONFIG6_1 = 0x000004c4; + GPMC_CONFIG7_1 = 0x00000f40 | (0x08000000 >> 24); + udelay(100); + + omap_cfg_reg(M15_24XX_GPIO92); + if (omap_request_gpio(OMAP24XX_ETHR_GPIO_IRQ) < 0) { + printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n", + OMAP24XX_ETHR_GPIO_IRQ); + return; + } + omap_set_gpio_direction(OMAP24XX_ETHR_GPIO_IRQ, 1); +} + +static void __init omap_h4_init_irq(void) +{ + omap_init_irq(); + omap_gpio_init(); + h4_init_smc91x(); +} + +static struct omap_uart_config h4_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + +static struct omap_mmc_config h4_mmc_config __initdata = { + .mmc [0] = { + .enabled = 1, + .wire4 = 1, + .wp_pin = -1, + .power_pin = -1, + .switch_pin = -1, + }, +}; + +static struct omap_lcd_config h4_lcd_config __initdata = { + .panel_name = "h4", + .ctrl_name = "internal", +}; + +static struct omap_board_config_kernel h4_config[] = { + { OMAP_TAG_UART, &h4_uart_config }, + { OMAP_TAG_MMC, &h4_mmc_config }, + { OMAP_TAG_LCD, &h4_lcd_config }, +}; + +static void __init omap_h4_init(void) +{ + /* + * Make sure the serial ports are muxed on at this point. + * You have to mux them off in device drivers later on + * if not needed. + */ + platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices)); + omap_board_config = h4_config; + omap_board_config_size = ARRAY_SIZE(h4_config); + omap_serial_init(); +} + +static void __init omap_h4_map_io(void) +{ + omap_map_common_io(); +} + +MACHINE_START(OMAP_H4, "OMAP2420 H4 board") + /* Maintainer: Paul Mundt */ + .phys_ram = 0x80000000, + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_h4_map_io, + .init_irq = omap_h4_init_irq, + .init_machine = omap_h4_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c new file mode 100644 index 000000000000..7181edb89352 --- /dev/null +++ b/arch/arm/mach-omap2/devices.c @@ -0,0 +1,89 @@ +/* + * linux/arch/arm/mach-omap2/devices.c + * + * OMAP2 platform device setup/initialization + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include + +extern void omap_nop_release(struct device *dev); + +/*-------------------------------------------------------------------------*/ + +#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) + +#define OMAP2_I2C_BASE2 0x48072000 +#define OMAP2_I2C_INT2 57 + +static struct resource i2c_resources2[] = { + { + .start = OMAP2_I2C_BASE2, + .end = OMAP2_I2C_BASE2 + 0x3f, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP2_I2C_INT2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device omap_i2c_device2 = { + .name = "i2c_omap", + .id = 2, + .dev = { + .release = omap_nop_release, + }, + .num_resources = ARRAY_SIZE(i2c_resources2), + .resource = i2c_resources2, +}; + +/* See also arch/arm/plat-omap/devices.c for first I2C on 24xx */ +static void omap_init_i2c(void) +{ + /* REVISIT: Second I2C not in use on H4? */ + if (machine_is_omap_h4()) + return; + + omap_cfg_reg(J15_24XX_I2C2_SCL); + omap_cfg_reg(H19_24XX_I2C2_SDA); + (void) platform_device_register(&omap_i2c_device2); +} + +#else + +static void omap_init_i2c(void) {} + +#endif + +/*-------------------------------------------------------------------------*/ + +static int __init omap2_init_devices(void) +{ + /* please keep these calls, and their implementations above, + * in alphabetical order so they're easier to sort through. + */ + omap_init_i2c(); + + return 0; +} +arch_initcall(omap2_init_devices); + diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c new file mode 100644 index 000000000000..76187300f2b6 --- /dev/null +++ b/arch/arm/mach-omap2/id.c @@ -0,0 +1,124 @@ +/* + * linux/arch/arm/mach-omap2/id.c + * + * OMAP2 CPU identification code + * + * Copyright (C) 2005 Nokia Corporation + * Written by Tony Lindgren + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include + +#include + +#define OMAP24XX_TAP_BASE io_p2v(0x48014000) + +#define OMAP_TAP_IDCODE 0x0204 +#define OMAP_TAP_PROD_ID 0x0208 + +#define OMAP_TAP_DIE_ID_0 0x0218 +#define OMAP_TAP_DIE_ID_1 0x021C +#define OMAP_TAP_DIE_ID_2 0x0220 +#define OMAP_TAP_DIE_ID_3 0x0224 + +/* system_rev fields for OMAP2 processors: + * CPU id bits [31:16], + * CPU device type [15:12], (unprg,normal,POP) + * CPU revision [11:08] + * CPU class bits [07:00] + */ + +struct omap_id { + u16 hawkeye; /* Silicon type (Hawkeye id) */ + u8 dev; /* Device type from production_id reg */ + u32 type; /* combined type id copied to system_rev */ +}; + +/* Register values to detect the OMAP version */ +static struct omap_id omap_ids[] __initdata = { + { .hawkeye = 0xb5d9, .dev = 0x0, .type = 0x24200000 }, + { .hawkeye = 0xb5d9, .dev = 0x1, .type = 0x24201000 }, + { .hawkeye = 0xb5d9, .dev = 0x2, .type = 0x24202000 }, + { .hawkeye = 0xb5d9, .dev = 0x4, .type = 0x24220000 }, + { .hawkeye = 0xb5d9, .dev = 0x8, .type = 0x24230000 }, + { .hawkeye = 0xb68a, .dev = 0x0, .type = 0x24300000 }, +}; + +static u32 __init read_tap_reg(int reg) +{ + return __raw_readl(OMAP24XX_TAP_BASE + reg); +} + +void __init omap2_check_revision(void) +{ + int i, j; + u32 idcode; + u32 prod_id; + u16 hawkeye; + u8 dev_type; + u8 rev; + + idcode = read_tap_reg(OMAP_TAP_IDCODE); + prod_id = read_tap_reg(OMAP_TAP_PROD_ID); + hawkeye = (idcode >> 12) & 0xffff; + rev = (idcode >> 28) & 0x0f; + dev_type = (prod_id >> 16) & 0x0f; + +#ifdef DEBUG + printk(KERN_DEBUG "OMAP_TAP_IDCODE 0x%08x REV %i HAWKEYE 0x%04x MANF %03x\n", + idcode, rev, hawkeye, (idcode >> 1) & 0x7ff); + printk(KERN_DEBUG "OMAP_TAP_DIE_ID_0: 0x%08x\n", + read_tap_reg(OMAP_TAP_DIE_ID_0)); + printk(KERN_DEBUG "OMAP_TAP_DIE_ID_1: 0x%08x DEV_REV: %i\n", + read_tap_reg(OMAP_TAP_DIE_ID_1), + (read_tap_reg(OMAP_TAP_DIE_ID_1) >> 28) & 0xf); + printk(KERN_DEBUG "OMAP_TAP_DIE_ID_2: 0x%08x\n", + read_tap_reg(OMAP_TAP_DIE_ID_2)); + printk(KERN_DEBUG "OMAP_TAP_DIE_ID_3: 0x%08x\n", + read_tap_reg(OMAP_TAP_DIE_ID_3)); + printk(KERN_DEBUG "OMAP_TAP_PROD_ID_0: 0x%08x DEV_TYPE: %i\n", + prod_id, dev_type); +#endif + + /* Check hawkeye ids */ + for (i = 0; i < ARRAY_SIZE(omap_ids); i++) { + if (hawkeye == omap_ids[i].hawkeye) + break; + } + + if (i == ARRAY_SIZE(omap_ids)) { + printk(KERN_ERR "Unknown OMAP CPU id\n"); + return; + } + + for (j = i; j < ARRAY_SIZE(omap_ids); j++) { + if (dev_type == omap_ids[j].dev) + break; + } + + if (j == ARRAY_SIZE(omap_ids)) { + printk(KERN_ERR "Unknown OMAP device type. " + "Handling it as OMAP%04x\n", + omap_ids[i].type >> 16); + j = i; + } + system_rev = omap_ids[j].type; + + system_rev |= rev << 8; + + /* Add the cpu class info (24xx) */ + system_rev |= 0x24; + + pr_info("OMAP%04x", system_rev >> 16); + if ((system_rev >> 8) & 0x0f) + printk("%x", (system_rev >> 8) & 0x0f); + printk("\n"); +} + diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c new file mode 100644 index 000000000000..8ea67bf196a5 --- /dev/null +++ b/arch/arm/mach-omap2/io.c @@ -0,0 +1,53 @@ +/* + * linux/arch/arm/mach-omap2/io.c + * + * OMAP2 I/O mapping code + * + * Copyright (C) 2005 Nokia Corporation + * Author: Juha Yrjölä + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include + +#include +#include +#include + +extern void omap_sram_init(void); +extern int omap2_clk_init(void); +extern void omap2_check_revision(void); + +/* + * The machine specific code may provide the extra mapping besides the + * default mapping provided here. + */ +static struct map_desc omap2_io_desc[] __initdata = { + { + .virtual = L3_24XX_VIRT, + .pfn = __phys_to_pfn(L3_24XX_PHYS), + .length = L3_24XX_SIZE, + .type = MT_DEVICE + }, + { + .virtual = L4_24XX_VIRT, + .pfn = __phys_to_pfn(L4_24XX_PHYS), + .length = L4_24XX_SIZE, + .type = MT_DEVICE + } +}; + +void __init omap_map_common_io(void) +{ + iotable_init(omap2_io_desc, ARRAY_SIZE(omap2_io_desc)); + omap2_check_revision(); + omap_sram_init(); + omap2_mux_init(); + omap2_clk_init(); +} diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c new file mode 100644 index 000000000000..d7baff675cfe --- /dev/null +++ b/arch/arm/mach-omap2/irq.c @@ -0,0 +1,149 @@ +/* + * linux/arch/arm/mach-omap/omap2/irq.c + * + * Interrupt handler for OMAP2 boards. + * + * Copyright (C) 2005 Nokia Corporation + * Author: Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#define INTC_REVISION 0x0000 +#define INTC_SYSCONFIG 0x0010 +#define INTC_SYSSTATUS 0x0014 +#define INTC_CONTROL 0x0048 +#define INTC_MIR_CLEAR0 0x0088 +#define INTC_MIR_SET0 0x008c + +/* + * OMAP2 has a number of different interrupt controllers, each interrupt + * controller is identified as its own "bank". Register definitions are + * fairly consistent for each bank, but not all registers are implemented + * for each bank.. when in doubt, consult the TRM. + */ +static struct omap_irq_bank { + unsigned long base_reg; + unsigned int nr_irqs; +} __attribute__ ((aligned(4))) irq_banks[] = { + { + /* MPU INTC */ + .base_reg = OMAP24XX_IC_BASE, + .nr_irqs = 96, + }, { + /* XXX: DSP INTC */ + +#if 0 + /* + * Commented out for now until we fix the IVA clocking + */ +#ifdef CONFIG_ARCH_OMAP2420 + }, { + /* IVA INTC (2420 only) */ + .base_reg = OMAP24XX_IVA_INTC_BASE, + .nr_irqs = 16, /* Actually 32, but only 16 are used */ +#endif +#endif + } +}; + +/* XXX: FIQ and additional INTC support (only MPU at the moment) */ +static void omap_ack_irq(unsigned int irq) +{ + omap_writel(0x1, irq_banks[0].base_reg + INTC_CONTROL); +} + +static void omap_mask_irq(unsigned int irq) +{ + int offset = (irq >> 5) << 5; + + if (irq >= 64) { + irq %= 64; + } else if (irq >= 32) { + irq %= 32; + } + + omap_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_SET0 + offset); +} + +static void omap_unmask_irq(unsigned int irq) +{ + int offset = (irq >> 5) << 5; + + if (irq >= 64) { + irq %= 64; + } else if (irq >= 32) { + irq %= 32; + } + + omap_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_CLEAR0 + offset); +} + +static void omap_mask_ack_irq(unsigned int irq) +{ + omap_mask_irq(irq); + omap_ack_irq(irq); +} + +static struct irqchip omap_irq_chip = { + .ack = omap_mask_ack_irq, + .mask = omap_mask_irq, + .unmask = omap_unmask_irq, +}; + +static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank) +{ + unsigned long tmp; + + tmp = omap_readl(bank->base_reg + INTC_REVISION) & 0xff; + printk(KERN_INFO "IRQ: Found an INTC at 0x%08lx " + "(revision %ld.%ld) with %d interrupts\n", + bank->base_reg, tmp >> 4, tmp & 0xf, bank->nr_irqs); + + tmp = omap_readl(bank->base_reg + INTC_SYSCONFIG); + tmp |= 1 << 1; /* soft reset */ + omap_writel(tmp, bank->base_reg + INTC_SYSCONFIG); + + while (!(omap_readl(bank->base_reg + INTC_SYSSTATUS) & 0x1)) + /* Wait for reset to complete */; +} + +void __init omap_init_irq(void) +{ + unsigned long nr_irqs = 0; + unsigned int nr_banks = 0; + int i; + + for (i = 0; i < ARRAY_SIZE(irq_banks); i++) { + struct omap_irq_bank *bank = irq_banks + i; + + /* XXX */ + if (!bank->base_reg) + continue; + + omap_irq_bank_init_one(bank); + + nr_irqs += bank->nr_irqs; + nr_banks++; + } + + printk(KERN_INFO "Total of %ld interrupts on %d active controller%s\n", + nr_irqs, nr_banks, nr_banks > 1 ? "s" : ""); + + for (i = 0; i < nr_irqs; i++) { + set_irq_chip(i, &omap_irq_chip); + set_irq_handler(i, do_level_IRQ); + set_irq_flags(i, IRQF_VALID); + } +} + diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c new file mode 100644 index 000000000000..ea4654815dd1 --- /dev/null +++ b/arch/arm/mach-omap2/mux.c @@ -0,0 +1,65 @@ +/* + * linux/arch/arm/mach-omap2/mux.c + * + * OMAP1 pin multiplexing configurations + * + * Copyright (C) 2003 - 2005 Nokia Corporation + * + * Written by Tony Lindgren + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#include +#include +#include +#include +#include +#include + +#include + +#ifdef CONFIG_OMAP_MUX + +/* NOTE: See mux.h for the enumeration */ + +struct pin_config __initdata_or_module omap24xx_pins[] = { +/* + * description mux mux pull pull debug + * offset mode ena type + */ + +/* 24xx I2C */ +MUX_CFG_24XX("M19_24XX_I2C1_SCL", 0x111, 0, 0, 0, 1) +MUX_CFG_24XX("L15_24XX_I2C1_SDA", 0x112, 0, 0, 0, 1) +MUX_CFG_24XX("J15_24XX_I2C2_SCL", 0x113, 0, 0, 0, 1) +MUX_CFG_24XX("H19_24XX_I2C2_SDA", 0x114, 0, 0, 0, 1) + +/* Menelaus interrupt */ +MUX_CFG_24XX("W19_24XX_SYS_NIRQ", 0x12c, 0, 1, 1, 1) + +/* 24xx GPIO */ +MUX_CFG_24XX("Y20_24XX_GPIO60", 0x12c, 3, 0, 0, 1) +MUX_CFG_24XX("M15_24XX_GPIO92", 0x10a, 3, 0, 0, 1) + +}; + +int __init omap2_mux_init(void) +{ + omap_mux_register(omap24xx_pins, ARRAY_SIZE(omap24xx_pins)); + return 0; +} + +#endif diff --git a/arch/arm/mach-omap2/prcm.h b/arch/arm/mach-omap2/prcm.h new file mode 100644 index 000000000000..2eb89b936c83 --- /dev/null +++ b/arch/arm/mach-omap2/prcm.h @@ -0,0 +1,419 @@ +/* + * prcm.h - Access definations for use in OMAP24XX clock and power management + * + * Copyright (C) 2005 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARM_ARCH_DPM_PRCM_H +#define __ASM_ARM_ARCH_DPM_PRCM_H + +/* SET_PERFORMANCE_LEVEL PARAMETERS */ +#define PRCM_HALF_SPEED 1 +#define PRCM_FULL_SPEED 2 + +#ifndef __ASSEMBLER__ + +#define PRCM_REG32(offset) __REG32(OMAP24XX_PRCM_BASE + (offset)) + +#define PRCM_REVISION PRCM_REG32(0x000) +#define PRCM_SYSCONFIG PRCM_REG32(0x010) +#define PRCM_IRQSTATUS_MPU PRCM_REG32(0x018) +#define PRCM_IRQENABLE_MPU PRCM_REG32(0x01C) +#define PRCM_VOLTCTRL PRCM_REG32(0x050) +#define PRCM_VOLTST PRCM_REG32(0x054) +#define PRCM_CLKSRC_CTRL PRCM_REG32(0x060) +#define PRCM_CLKOUT_CTRL PRCM_REG32(0x070) +#define PRCM_CLKEMUL_CTRL PRCM_REG32(0x078) +#define PRCM_CLKCFG_CTRL PRCM_REG32(0x080) +#define PRCM_CLKCFG_STATUS PRCM_REG32(0x084) +#define PRCM_VOLTSETUP PRCM_REG32(0x090) +#define PRCM_CLKSSETUP PRCM_REG32(0x094) +#define PRCM_POLCTRL PRCM_REG32(0x098) + +/* GENERAL PURPOSE */ +#define GENERAL_PURPOSE1 PRCM_REG32(0x0B0) +#define GENERAL_PURPOSE2 PRCM_REG32(0x0B4) +#define GENERAL_PURPOSE3 PRCM_REG32(0x0B8) +#define GENERAL_PURPOSE4 PRCM_REG32(0x0BC) +#define GENERAL_PURPOSE5 PRCM_REG32(0x0C0) +#define GENERAL_PURPOSE6 PRCM_REG32(0x0C4) +#define GENERAL_PURPOSE7 PRCM_REG32(0x0C8) +#define GENERAL_PURPOSE8 PRCM_REG32(0x0CC) +#define GENERAL_PURPOSE9 PRCM_REG32(0x0D0) +#define GENERAL_PURPOSE10 PRCM_REG32(0x0D4) +#define GENERAL_PURPOSE11 PRCM_REG32(0x0D8) +#define GENERAL_PURPOSE12 PRCM_REG32(0x0DC) +#define GENERAL_PURPOSE13 PRCM_REG32(0x0E0) +#define GENERAL_PURPOSE14 PRCM_REG32(0x0E4) +#define GENERAL_PURPOSE15 PRCM_REG32(0x0E8) +#define GENERAL_PURPOSE16 PRCM_REG32(0x0EC) +#define GENERAL_PURPOSE17 PRCM_REG32(0x0F0) +#define GENERAL_PURPOSE18 PRCM_REG32(0x0F4) +#define GENERAL_PURPOSE19 PRCM_REG32(0x0F8) +#define GENERAL_PURPOSE20 PRCM_REG32(0x0FC) + +/* MPU */ +#define CM_CLKSEL_MPU PRCM_REG32(0x140) +#define CM_CLKSTCTRL_MPU PRCM_REG32(0x148) +#define RM_RSTST_MPU PRCM_REG32(0x158) +#define PM_WKDEP_MPU PRCM_REG32(0x1C8) +#define PM_EVGENCTRL_MPU PRCM_REG32(0x1D4) +#define PM_EVEGENONTIM_MPU PRCM_REG32(0x1D8) +#define PM_EVEGENOFFTIM_MPU PRCM_REG32(0x1DC) +#define PM_PWSTCTRL_MPU PRCM_REG32(0x1E0) +#define PM_PWSTST_MPU PRCM_REG32(0x1E4) + +/* CORE */ +#define CM_FCLKEN1_CORE PRCM_REG32(0x200) +#define CM_FCLKEN2_CORE PRCM_REG32(0x204) +#define CM_FCLKEN3_CORE PRCM_REG32(0x208) +#define CM_ICLKEN1_CORE PRCM_REG32(0x210) +#define CM_ICLKEN2_CORE PRCM_REG32(0x214) +#define CM_ICLKEN3_CORE PRCM_REG32(0x218) +#define CM_ICLKEN4_CORE PRCM_REG32(0x21C) +#define CM_IDLEST1_CORE PRCM_REG32(0x220) +#define CM_IDLEST2_CORE PRCM_REG32(0x224) +#define CM_IDLEST3_CORE PRCM_REG32(0x228) +#define CM_IDLEST4_CORE PRCM_REG32(0x22C) +#define CM_AUTOIDLE1_CORE PRCM_REG32(0x230) +#define CM_AUTOIDLE2_CORE PRCM_REG32(0x234) +#define CM_AUTOIDLE3_CORE PRCM_REG32(0x238) +#define CM_AUTOIDLE4_CORE PRCM_REG32(0x23C) +#define CM_CLKSEL1_CORE PRCM_REG32(0x240) +#define CM_CLKSEL2_CORE PRCM_REG32(0x244) +#define CM_CLKSTCTRL_CORE PRCM_REG32(0x248) +#define PM_WKEN1_CORE PRCM_REG32(0x2A0) +#define PM_WKEN2_CORE PRCM_REG32(0x2A4) +#define PM_WKST1_CORE PRCM_REG32(0x2B0) +#define PM_WKST2_CORE PRCM_REG32(0x2B4) +#define PM_WKDEP_CORE PRCM_REG32(0x2C8) +#define PM_PWSTCTRL_CORE PRCM_REG32(0x2E0) +#define PM_PWSTST_CORE PRCM_REG32(0x2E4) + +/* GFX */ +#define CM_FCLKEN_GFX PRCM_REG32(0x300) +#define CM_ICLKEN_GFX PRCM_REG32(0x310) +#define CM_IDLEST_GFX PRCM_REG32(0x320) +#define CM_CLKSEL_GFX PRCM_REG32(0x340) +#define CM_CLKSTCTRL_GFX PRCM_REG32(0x348) +#define RM_RSTCTRL_GFX PRCM_REG32(0x350) +#define RM_RSTST_GFX PRCM_REG32(0x358) +#define PM_WKDEP_GFX PRCM_REG32(0x3C8) +#define PM_PWSTCTRL_GFX PRCM_REG32(0x3E0) +#define PM_PWSTST_GFX PRCM_REG32(0x3E4) + +/* WAKE-UP */ +#define CM_FCLKEN_WKUP PRCM_REG32(0x400) +#define CM_ICLKEN_WKUP PRCM_REG32(0x410) +#define CM_IDLEST_WKUP PRCM_REG32(0x420) +#define CM_AUTOIDLE_WKUP PRCM_REG32(0x430) +#define CM_CLKSEL_WKUP PRCM_REG32(0x440) +#define RM_RSTCTRL_WKUP PRCM_REG32(0x450) +#define RM_RSTTIME_WKUP PRCM_REG32(0x454) +#define RM_RSTST_WKUP PRCM_REG32(0x458) +#define PM_WKEN_WKUP PRCM_REG32(0x4A0) +#define PM_WKST_WKUP PRCM_REG32(0x4B0) + +/* CLOCKS */ +#define CM_CLKEN_PLL PRCM_REG32(0x500) +#define CM_IDLEST_CKGEN PRCM_REG32(0x520) +#define CM_AUTOIDLE_PLL PRCM_REG32(0x530) +#define CM_CLKSEL1_PLL PRCM_REG32(0x540) +#define CM_CLKSEL2_PLL PRCM_REG32(0x544) + +/* DSP */ +#define CM_FCLKEN_DSP PRCM_REG32(0x800) +#define CM_ICLKEN_DSP PRCM_REG32(0x810) +#define CM_IDLEST_DSP PRCM_REG32(0x820) +#define CM_AUTOIDLE_DSP PRCM_REG32(0x830) +#define CM_CLKSEL_DSP PRCM_REG32(0x840) +#define CM_CLKSTCTRL_DSP PRCM_REG32(0x848) +#define RM_RSTCTRL_DSP PRCM_REG32(0x850) +#define RM_RSTST_DSP PRCM_REG32(0x858) +#define PM_WKEN_DSP PRCM_REG32(0x8A0) +#define PM_WKDEP_DSP PRCM_REG32(0x8C8) +#define PM_PWSTCTRL_DSP PRCM_REG32(0x8E0) +#define PM_PWSTST_DSP PRCM_REG32(0x8E4) +#define PRCM_IRQSTATUS_DSP PRCM_REG32(0x8F0) +#define PRCM_IRQENABLE_DSP PRCM_REG32(0x8F4) + +/* IVA */ +#define PRCM_IRQSTATUS_IVA PRCM_REG32(0x8F8) +#define PRCM_IRQENABLE_IVA PRCM_REG32(0x8FC) + +/* Modem on 2430 */ +#define CM_FCLKEN_MDM PRCM_REG32(0xC00) +#define CM_ICLKEN_MDM PRCM_REG32(0xC10) +#define CM_IDLEST_MDM PRCM_REG32(0xC20) +#define CM_CLKSEL_MDM PRCM_REG32(0xC40) + +/* FIXME: Move to header for 2430 */ +#define DISP_BASE (OMAP24XX_L4_IO_BASE+0x50000) +#define DISP_REG32(offset) __REG32(DISP_BASE + (offset)) + +#define GPMC_BASE (OMAP24XX_GPMC_BASE) +#define GPMC_REG32(offset) __REG32(GPMC_BASE + (offset)) + +#define GPT1_BASE (OMAP24XX_GPT1) +#define GPT1_REG32(offset) __REG32(GPT1_BASE + (offset)) + +/* Misc sysconfig */ +#define DISPC_SYSCONFIG DISP_REG32(0x410) +#define SPI_BASE (OMAP24XX_L4_IO_BASE+0x98000) +#define MCSPI1_SYSCONFIG __REG32(SPI_BASE + 0x10) +#define MCSPI2_SYSCONFIG __REG32(SPI_BASE+0x2000 + 0x10) + +//#define DSP_MMU_SYSCONFIG 0x5A000010 +#define CAMERA_MMU_SYSCONFIG __REG32(DISP_BASE+0x2C10) +//#define IVA_MMU_SYSCONFIG 0x5D000010 +//#define DSP_DMA_SYSCONFIG 0x00FCC02C +#define CAMERA_DMA_SYSCONFIG __REG32(DISP_BASE+0x282C) +#define SYSTEM_DMA_SYSCONFIG __REG32(DISP_BASE+0x602C) +#define GPMC_SYSCONFIG GPMC_REG32(0x010) +#define MAILBOXES_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x94010) +#define UART1_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x6A054) +#define UART2_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x6C054) +#define UART3_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x6E054) +//#define IVA_SYSCONFIG 0x5C060010 +#define SDRC_SYSCONFIG __REG32(OMAP24XX_SDRC_BASE+0x10) +#define SMS_SYSCONFIG __REG32(OMAP24XX_SMS_BASE+0x10) +#define SSI_SYSCONFIG __REG32(DISP_BASE+0x8010) +//#define VLYNQ_SYSCONFIG 0x67FFFE10 + +/* rkw - good cannidates for PM_ to start what nm was trying */ +#define OMAP24XX_GPT2 (OMAP24XX_L4_IO_BASE+0x2A000) +#define OMAP24XX_GPT3 (OMAP24XX_L4_IO_BASE+0x78000) +#define OMAP24XX_GPT4 (OMAP24XX_L4_IO_BASE+0x7A000) +#define OMAP24XX_GPT5 (OMAP24XX_L4_IO_BASE+0x7C000) +#define OMAP24XX_GPT6 (OMAP24XX_L4_IO_BASE+0x7E000) +#define OMAP24XX_GPT7 (OMAP24XX_L4_IO_BASE+0x80000) +#define OMAP24XX_GPT8 (OMAP24XX_L4_IO_BASE+0x82000) +#define OMAP24XX_GPT9 (OMAP24XX_L4_IO_BASE+0x84000) +#define OMAP24XX_GPT10 (OMAP24XX_L4_IO_BASE+0x86000) +#define OMAP24XX_GPT11 (OMAP24XX_L4_IO_BASE+0x88000) +#define OMAP24XX_GPT12 (OMAP24XX_L4_IO_BASE+0x8A000) + +#define GPTIMER1_SYSCONFIG GPT1_REG32(0x010) +#define GPTIMER2_SYSCONFIG __REG32(OMAP24XX_GPT2 + 0x10) +#define GPTIMER3_SYSCONFIG __REG32(OMAP24XX_GPT3 + 0x10) +#define GPTIMER4_SYSCONFIG __REG32(OMAP24XX_GPT4 + 0x10) +#define GPTIMER5_SYSCONFIG __REG32(OMAP24XX_GPT5 + 0x10) +#define GPTIMER6_SYSCONFIG __REG32(OMAP24XX_GPT6 + 0x10) +#define GPTIMER7_SYSCONFIG __REG32(OMAP24XX_GPT7 + 0x10) +#define GPTIMER8_SYSCONFIG __REG32(OMAP24XX_GPT8 + 0x10) +#define GPTIMER9_SYSCONFIG __REG32(OMAP24XX_GPT9 + 0x10) +#define GPTIMER10_SYSCONFIG __REG32(OMAP24XX_GPT10 + 0x10) +#define GPTIMER11_SYSCONFIG __REG32(OMAP24XX_GPT11 + 0x10) +#define GPTIMER12_SYSCONFIG __REG32(OMAP24XX_GPT12 + 0x10) + +#define GPIOX_BASE(X) (OMAP24XX_GPIO_BASE+(0x2000*((X)-1))) + +#define GPIO1_SYSCONFIG __REG32((GPIOX_BASE(1)+0x10)) +#define GPIO2_SYSCONFIG __REG32((GPIOX_BASE(2)+0x10)) +#define GPIO3_SYSCONFIG __REG32((GPIOX_BASE(3)+0x10)) +#define GPIO4_SYSCONFIG __REG32((GPIOX_BASE(4)+0x10)) + +/* GP TIMER 1 */ +#define GPTIMER1_TISTAT GPT1_REG32(0x014) +#define GPTIMER1_TISR GPT1_REG32(0x018) +#define GPTIMER1_TIER GPT1_REG32(0x01C) +#define GPTIMER1_TWER GPT1_REG32(0x020) +#define GPTIMER1_TCLR GPT1_REG32(0x024) +#define GPTIMER1_TCRR GPT1_REG32(0x028) +#define GPTIMER1_TLDR GPT1_REG32(0x02C) +#define GPTIMER1_TTGR GPT1_REG32(0x030) +#define GPTIMER1_TWPS GPT1_REG32(0x034) +#define GPTIMER1_TMAR GPT1_REG32(0x038) +#define GPTIMER1_TCAR1 GPT1_REG32(0x03C) +#define GPTIMER1_TSICR GPT1_REG32(0x040) +#define GPTIMER1_TCAR2 GPT1_REG32(0x044) + +/* rkw -- base fix up please... */ +#define GPTIMER3_TISR __REG32(OMAP24XX_L4_IO_BASE+0x78018) + +/* SDRC */ +#define SDRC_DLLA_CTRL __REG32(OMAP24XX_SDRC_BASE+0x060) +#define SDRC_DLLA_STATUS __REG32(OMAP24XX_SDRC_BASE+0x064) +#define SDRC_DLLB_CTRL __REG32(OMAP24XX_SDRC_BASE+0x068) +#define SDRC_DLLB_STATUS __REG32(OMAP24XX_SDRC_BASE+0x06C) +#define SDRC_POWER __REG32(OMAP24XX_SDRC_BASE+0x070) +#define SDRC_MR_0 __REG32(OMAP24XX_SDRC_BASE+0x084) + +/* GPIO 1 */ +#define GPIO1_BASE GPIOX_BASE(1) +#define GPIO1_REG32(offset) __REG32(GPIO1_BASE + (offset)) +#define GPIO1_IRQENABLE1 GPIO1_REG32(0x01C) +#define GPIO1_IRQSTATUS1 GPIO1_REG32(0x018) +#define GPIO1_IRQENABLE2 GPIO1_REG32(0x02C) +#define GPIO1_IRQSTATUS2 GPIO1_REG32(0x028) +#define GPIO1_WAKEUPENABLE GPIO1_REG32(0x020) +#define GPIO1_RISINGDETECT GPIO1_REG32(0x048) +#define GPIO1_DATAIN GPIO1_REG32(0x038) +#define GPIO1_OE GPIO1_REG32(0x034) +#define GPIO1_DATAOUT GPIO1_REG32(0x03C) + +/* GPIO2 */ +#define GPIO2_BASE GPIOX_BASE(2) +#define GPIO2_REG32(offset) __REG32(GPIO2_BASE + (offset)) +#define GPIO2_IRQENABLE1 GPIO2_REG32(0x01C) +#define GPIO2_IRQSTATUS1 GPIO2_REG32(0x018) +#define GPIO2_IRQENABLE2 GPIO2_REG32(0x02C) +#define GPIO2_IRQSTATUS2 GPIO2_REG32(0x028) +#define GPIO2_WAKEUPENABLE GPIO2_REG32(0x020) +#define GPIO2_RISINGDETECT GPIO2_REG32(0x048) +#define GPIO2_DATAIN GPIO2_REG32(0x038) +#define GPIO2_OE GPIO2_REG32(0x034) +#define GPIO2_DATAOUT GPIO2_REG32(0x03C) + +/* GPIO 3 */ +#define GPIO3_BASE GPIOX_BASE(3) +#define GPIO3_REG32(offset) __REG32(GPIO3_BASE + (offset)) +#define GPIO3_IRQENABLE1 GPIO3_REG32(0x01C) +#define GPIO3_IRQSTATUS1 GPIO3_REG32(0x018) +#define GPIO3_IRQENABLE2 GPIO3_REG32(0x02C) +#define GPIO3_IRQSTATUS2 GPIO3_REG32(0x028) +#define GPIO3_WAKEUPENABLE GPIO3_REG32(0x020) +#define GPIO3_RISINGDETECT GPIO3_REG32(0x048) +#define GPIO3_FALLINGDETECT GPIO3_REG32(0x04C) +#define GPIO3_DATAIN GPIO3_REG32(0x038) +#define GPIO3_OE GPIO3_REG32(0x034) +#define GPIO3_DATAOUT GPIO3_REG32(0x03C) +#define GPIO3_DEBOUNCENABLE GPIO3_REG32(0x050) +#define GPIO3_DEBOUNCINGTIME GPIO3_REG32(0x054) + +/* GPIO 4 */ +#define GPIO4_BASE GPIOX_BASE(4) +#define GPIO4_REG32(offset) __REG32(GPIO4_BASE + (offset)) +#define GPIO4_IRQENABLE1 GPIO4_REG32(0x01C) +#define GPIO4_IRQSTATUS1 GPIO4_REG32(0x018) +#define GPIO4_IRQENABLE2 GPIO4_REG32(0x02C) +#define GPIO4_IRQSTATUS2 GPIO4_REG32(0x028) +#define GPIO4_WAKEUPENABLE GPIO4_REG32(0x020) +#define GPIO4_RISINGDETECT GPIO4_REG32(0x048) +#define GPIO4_FALLINGDETECT GPIO4_REG32(0x04C) +#define GPIO4_DATAIN GPIO4_REG32(0x038) +#define GPIO4_OE GPIO4_REG32(0x034) +#define GPIO4_DATAOUT GPIO4_REG32(0x03C) +#define GPIO4_DEBOUNCENABLE GPIO4_REG32(0x050) +#define GPIO4_DEBOUNCINGTIME GPIO4_REG32(0x054) + + +/* IO CONFIG */ +#define CONTROL_BASE (OMAP24XX_CTRL_BASE) +#define CONTROL_REG32(offset) __REG32(CONTROL_BASE + (offset)) + +#define CONTROL_PADCONF_SPI1_NCS2 CONTROL_REG32(0x104) +#define CONTROL_PADCONF_SYS_XTALOUT CONTROL_REG32(0x134) +#define CONTROL_PADCONF_UART1_RX CONTROL_REG32(0x0C8) +#define CONTROL_PADCONF_MCBSP1_DX CONTROL_REG32(0x10C) +#define CONTROL_PADCONF_GPMC_NCS4 CONTROL_REG32(0x090) +#define CONTROL_PADCONF_DSS_D5 CONTROL_REG32(0x0B8) +#define CONTROL_PADCONF_DSS_D9 CONTROL_REG32(0x0BC) +#define CONTROL_PADCONF_DSS_D13 CONTROL_REG32(0x0C0) +#define CONTROL_PADCONF_DSS_VSYNC CONTROL_REG32(0x0CC) + +/* CONTROL */ +#define CONTROL_DEVCONF CONTROL_REG32(0x274) + +/* INTERRUPT CONTROLLER */ +#define INTC_BASE (OMAP24XX_L4_IO_BASE+0xfe000) +#define INTC_REG32(offset) __REG32(INTC_BASE + (offset)) + +#define INTC1_U_BASE INTC_REG32(0x000) +#define INTC_MIR0 INTC_REG32(0x084) +#define INTC_MIR_SET0 INTC_REG32(0x08C) +#define INTC_MIR_CLEAR0 INTC_REG32(0x088) +#define INTC_ISR_CLEAR0 INTC_REG32(0x094) +#define INTC_MIR1 INTC_REG32(0x0A4) +#define INTC_MIR_SET1 INTC_REG32(0x0AC) +#define INTC_MIR_CLEAR1 INTC_REG32(0x0A8) +#define INTC_ISR_CLEAR1 INTC_REG32(0x0B4) +#define INTC_MIR2 INTC_REG32(0x0C4) +#define INTC_MIR_SET2 INTC_REG32(0x0CC) +#define INTC_MIR_CLEAR2 INTC_REG32(0x0C8) +#define INTC_ISR_CLEAR2 INTC_REG32(0x0D4) +#define INTC_SIR_IRQ INTC_REG32(0x040) +#define INTC_CONTROL INTC_REG32(0x048) +#define INTC_ILR11 INTC_REG32(0x12C) +#define INTC_ILR32 INTC_REG32(0x180) +#define INTC_ILR37 INTC_REG32(0x194) +#define INTC_SYSCONFIG INTC_REG32(0x010) + +/* RAM FIREWALL */ +#define RAMFW_BASE (0x68005000) +#define RAMFW_REG32(offset) __REG32(RAMFW_BASE + (offset)) + +#define RAMFW_REQINFOPERM0 RAMFW_REG32(0x048) +#define RAMFW_READPERM0 RAMFW_REG32(0x050) +#define RAMFW_WRITEPERM0 RAMFW_REG32(0x058) + +/* GPMC CS1 FPGA ON USER INTERFACE MODULE */ +//#define DEBUG_BOARD_LED_REGISTER 0x04000014 + +/* GPMC CS0 */ +#define GPMC_CONFIG1_0 GPMC_REG32(0x060) +#define GPMC_CONFIG2_0 GPMC_REG32(0x064) +#define GPMC_CONFIG3_0 GPMC_REG32(0x068) +#define GPMC_CONFIG4_0 GPMC_REG32(0x06C) +#define GPMC_CONFIG5_0 GPMC_REG32(0x070) +#define GPMC_CONFIG6_0 GPMC_REG32(0x074) +#define GPMC_CONFIG7_0 GPMC_REG32(0x078) + +/* DSS */ +#define DSS_CONTROL DISP_REG32(0x040) +#define DISPC_CONTROL DISP_REG32(0x440) +#define DISPC_SYSSTATUS DISP_REG32(0x414) +#define DISPC_IRQSTATUS DISP_REG32(0x418) +#define DISPC_IRQENABLE DISP_REG32(0x41C) +#define DISPC_CONFIG DISP_REG32(0x444) +#define DISPC_DEFAULT_COLOR0 DISP_REG32(0x44C) +#define DISPC_DEFAULT_COLOR1 DISP_REG32(0x450) +#define DISPC_TRANS_COLOR0 DISP_REG32(0x454) +#define DISPC_TRANS_COLOR1 DISP_REG32(0x458) +#define DISPC_LINE_NUMBER DISP_REG32(0x460) +#define DISPC_TIMING_H DISP_REG32(0x464) +#define DISPC_TIMING_V DISP_REG32(0x468) +#define DISPC_POL_FREQ DISP_REG32(0x46C) +#define DISPC_DIVISOR DISP_REG32(0x470) +#define DISPC_SIZE_DIG DISP_REG32(0x478) +#define DISPC_SIZE_LCD DISP_REG32(0x47C) +#define DISPC_GFX_BA0 DISP_REG32(0x480) +#define DISPC_GFX_BA1 DISP_REG32(0x484) +#define DISPC_GFX_POSITION DISP_REG32(0x488) +#define DISPC_GFX_SIZE DISP_REG32(0x48C) +#define DISPC_GFX_ATTRIBUTES DISP_REG32(0x4A0) +#define DISPC_GFX_FIFO_THRESHOLD DISP_REG32(0x4A4) +#define DISPC_GFX_ROW_INC DISP_REG32(0x4AC) +#define DISPC_GFX_PIXEL_INC DISP_REG32(0x4B0) +#define DISPC_GFX_WINDOW_SKIP DISP_REG32(0x4B4) +#define DISPC_GFX_TABLE_BA DISP_REG32(0x4B8) +#define DISPC_DATA_CYCLE1 DISP_REG32(0x5D4) +#define DISPC_DATA_CYCLE2 DISP_REG32(0x5D8) +#define DISPC_DATA_CYCLE3 DISP_REG32(0x5DC) + +/* Wake up define for board */ +#define GPIO97 (1 << 1) +#define GPIO88 (1 << 24) + +#endif /* __ASSEMBLER__ */ + +#endif + + + + + diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c new file mode 100644 index 000000000000..f4df04fe1dd8 --- /dev/null +++ b/arch/arm/mach-omap2/serial.c @@ -0,0 +1,180 @@ +/* + * arch/arm/mach-omap/omap2/serial.c + * + * OMAP2 serial support. + * + * Copyright (C) 2005 Nokia Corporation + * Author: Paul Mundt + * + * Based off of arch/arm/mach-omap/omap1/serial.c + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include + +#include +#include + +#include +#include + +static struct clk * uart1_ick = NULL; +static struct clk * uart1_fck = NULL; +static struct clk * uart2_ick = NULL; +static struct clk * uart2_fck = NULL; +static struct clk * uart3_ick = NULL; +static struct clk * uart3_fck = NULL; + +static struct plat_serial8250_port serial_platform_data[] = { + { + .membase = (char *)IO_ADDRESS(OMAP_UART1_BASE), + .mapbase = (unsigned long)OMAP_UART1_BASE, + .irq = 72, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = OMAP16XX_BASE_BAUD * 16, + }, { + .membase = (char *)IO_ADDRESS(OMAP_UART2_BASE), + .mapbase = (unsigned long)OMAP_UART2_BASE, + .irq = 73, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = OMAP16XX_BASE_BAUD * 16, + }, { + .membase = (char *)IO_ADDRESS(OMAP_UART3_BASE), + .mapbase = (unsigned long)OMAP_UART3_BASE, + .irq = 74, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = OMAP16XX_BASE_BAUD * 16, + }, { + .flags = 0 + } +}; + +static inline unsigned int serial_read_reg(struct plat_serial8250_port *up, + int offset) +{ + offset <<= up->regshift; + return (unsigned int)__raw_readb(up->membase + offset); +} + +static inline void serial_write_reg(struct plat_serial8250_port *p, int offset, + int value) +{ + offset <<= p->regshift; + __raw_writeb(value, (unsigned long)(p->membase + offset)); +} + +/* + * Internal UARTs need to be initialized for the 8250 autoconfig to work + * properly. Note that the TX watermark initialization may not be needed + * once the 8250.c watermark handling code is merged. + */ +static inline void __init omap_serial_reset(struct plat_serial8250_port *p) +{ + serial_write_reg(p, UART_OMAP_MDR1, 0x07); + serial_write_reg(p, UART_OMAP_SCR, 0x08); + serial_write_reg(p, UART_OMAP_MDR1, 0x00); + serial_write_reg(p, UART_OMAP_SYSC, 0x01); +} + +void __init omap_serial_init() +{ + int i; + const struct omap_uart_config *info; + + /* + * Make sure the serial ports are muxed on at this point. + * You have to mux them off in device drivers later on + * if not needed. + */ + + info = omap_get_config(OMAP_TAG_UART, + struct omap_uart_config); + + if (info == NULL) + return; + + for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { + struct plat_serial8250_port *p = serial_platform_data + i; + + if (!(info->enabled_uarts & (1 << i))) { + p->membase = 0; + p->mapbase = 0; + continue; + } + + switch (i) { + case 0: + uart1_ick = clk_get(NULL, "uart1_ick"); + if (IS_ERR(uart1_ick)) + printk("Could not get uart1_ick\n"); + else { + clk_use(uart1_ick); + } + + uart1_fck = clk_get(NULL, "uart1_fck"); + if (IS_ERR(uart1_fck)) + printk("Could not get uart1_fck\n"); + else { + clk_use(uart1_fck); + } + break; + case 1: + uart2_ick = clk_get(NULL, "uart2_ick"); + if (IS_ERR(uart2_ick)) + printk("Could not get uart2_ick\n"); + else { + clk_use(uart2_ick); + } + + uart2_fck = clk_get(NULL, "uart2_fck"); + if (IS_ERR(uart2_fck)) + printk("Could not get uart2_fck\n"); + else { + clk_use(uart2_fck); + } + break; + case 2: + uart3_ick = clk_get(NULL, "uart3_ick"); + if (IS_ERR(uart3_ick)) + printk("Could not get uart3_ick\n"); + else { + clk_use(uart3_ick); + } + + uart3_fck = clk_get(NULL, "uart3_fck"); + if (IS_ERR(uart3_fck)) + printk("Could not get uart3_fck\n"); + else { + clk_use(uart3_fck); + } + break; + } + + omap_serial_reset(p); + } +} + +static struct platform_device serial_device = { + .name = "serial8250", + .id = 0, + .dev = { + .platform_data = serial_platform_data, + }, +}; + +static int __init omap_init(void) +{ + return platform_device_register(&serial_device); +} +arch_initcall(omap_init); diff --git a/arch/arm/mach-omap2/sram-fn.S b/arch/arm/mach-omap2/sram-fn.S new file mode 100644 index 000000000000..2a869e203342 --- /dev/null +++ b/arch/arm/mach-omap2/sram-fn.S @@ -0,0 +1,333 @@ +/* + * linux/arch/arm/mach-omap1/sram.S + * + * Omap2 specific functions that need to be run in internal SRAM + * + * (C) Copyright 2004 + * Texas Instruments, + * Richard Woodruff + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include +#include +#include +#include +#include + +#include + +#define TIMER_32KSYNCT_CR_V IO_ADDRESS(OMAP24XX_32KSYNCT_BASE + 0x010) + +#define CM_CLKSEL2_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x544) +#define PRCM_VOLTCTRL_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x050) +#define PRCM_CLKCFG_CTRL_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x080) +#define CM_CLKEN_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x500) +#define CM_IDLEST_CKGEN_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x520) +#define CM_CLKSEL1_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x540) + +#define SDRC_DLLA_CTRL_V IO_ADDRESS(OMAP24XX_SDRC_BASE + 0x060) +#define SDRC_RFR_CTRL_V IO_ADDRESS(OMAP24XX_SDRC_BASE + 0x0a4) + + .text + +ENTRY(sram_ddr_init) + stmfd sp!, {r0 - r12, lr} @ save registers on stack + + mov r12, r2 @ capture CS1 vs CS0 + mov r8, r3 @ capture force parameter + + /* frequency shift down */ + ldr r2, cm_clksel2_pll @ get address of dpllout reg + mov r3, #0x1 @ value for 1x operation + str r3, [r2] @ go to L1-freq operation + + /* voltage shift down */ + mov r9, #0x1 @ set up for L1 voltage call + bl voltage_shift @ go drop voltage + + /* dll lock mode */ + ldr r11, sdrc_dlla_ctrl @ addr of dlla ctrl + ldr r10, [r11] @ get current val + cmp r12, #0x1 @ cs1 base (2422 es2.05/1) + addeq r11, r11, #0x8 @ if cs1 base, move to DLLB + mvn r9, #0x4 @ mask to get clear bit2 + and r10, r10, r9 @ clear bit2 for lock mode. + orr r10, r10, #0x8 @ make sure DLL on (es2 bit pos) + orr r10, r10, #0x2 @ 90 degree phase for all below 133Mhz + str r10, [r11] @ commit to DLLA_CTRL + bl i_dll_wait @ wait for dll to lock + + /* get dll value */ + add r11, r11, #0x4 @ get addr of status reg + ldr r10, [r11] @ get locked value + + /* voltage shift up */ + mov r9, #0x0 @ shift back to L0-voltage + bl voltage_shift @ go raise voltage + + /* frequency shift up */ + mov r3, #0x2 @ value for 2x operation + str r3, [r2] @ go to L0-freq operation + + /* reset entry mode for dllctrl */ + sub r11, r11, #0x4 @ move from status to ctrl + cmp r12, #0x1 @ normalize if cs1 based + subeq r11, r11, #0x8 @ possibly back to DLLA + cmp r8, #0x1 @ if forced unlock exit + orreq r1, r1, #0x4 @ make sure exit with unlocked value + str r1, [r11] @ restore DLLA_CTRL high value + add r11, r11, #0x8 @ move to DLLB_CTRL addr + str r1, [r11] @ set value DLLB_CTRL + bl i_dll_wait @ wait for possible lock + + /* set up for return, DDR should be good */ + str r10, [r0] @ write dll_status and return counter + ldmfd sp!, {r0 - r12, pc} @ restore regs and return + + /* ensure the DLL has relocked */ +i_dll_wait: + mov r4, #0x800 @ delay DLL relock, min 0x400 L3 clocks +i_dll_delay: + subs r4, r4, #0x1 + bne i_dll_delay + mov pc, lr + + /* + * shift up or down voltage, use R9 as input to tell level. + * wait for it to finish, use 32k sync counter, 1tick=31uS. + */ +voltage_shift: + ldr r4, prcm_voltctrl @ get addr of volt ctrl. + ldr r5, [r4] @ get value. + ldr r6, prcm_mask_val @ get value of mask + and r5, r5, r6 @ apply mask to clear bits + orr r5, r5, r9 @ bulld value for L0/L1-volt operation. + str r5, [r4] @ set up for change. + mov r3, #0x4000 @ get val for force + orr r5, r5, r3 @ build value for force + str r5, [r4] @ Force transition to L1 + + ldr r3, timer_32ksynct_cr @ get addr of counter + ldr r5, [r3] @ get value + add r5, r5, #0x3 @ give it at most 93uS +volt_delay: + ldr r7, [r3] @ get timer value + cmp r5, r7 @ time up? + bhi volt_delay @ not yet->branch + mov pc, lr @ back to caller. + +/* relative load constants */ +cm_clksel2_pll: + .word CM_CLKSEL2_PLL_V +sdrc_dlla_ctrl: + .word SDRC_DLLA_CTRL_V +prcm_voltctrl: + .word PRCM_VOLTCTRL_V +prcm_mask_val: + .word 0xFFFF3FFC +timer_32ksynct_cr: + .word TIMER_32KSYNCT_CR_V +ENTRY(sram_ddr_init_sz) + .word . - sram_ddr_init + +/* + * Reprograms memory timings. + * r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR] + * PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0 + */ +ENTRY(sram_reprogram_sdrc) + stmfd sp!, {r0 - r10, lr} @ save registers on stack + mov r3, #0x0 @ clear for mrc call + mcr p15, 0, r3, c7, c10, 4 @ memory barrier, finish ARM SDR/DDR + nop + nop + ldr r6, ddr_sdrc_rfr_ctrl @ get addr of refresh reg + ldr r5, [r6] @ get value + mov r5, r5, lsr #8 @ isolate rfr field and drop burst + + cmp r0, #0x1 @ going to half speed? + movne r9, #0x0 @ if up set flag up for pre up, hi volt + + blne voltage_shift_c @ adjust voltage + + cmp r0, #0x1 @ going to half speed (post branch link) + moveq r5, r5, lsr #1 @ divide by 2 if to half + movne r5, r5, lsl #1 @ mult by 2 if to full + mov r5, r5, lsl #8 @ put rfr field back into place + add r5, r5, #0x1 @ turn on burst of 1 + ldr r4, ddr_cm_clksel2_pll @ get address of out reg + ldr r3, [r4] @ get curr value + orr r3, r3, #0x3 + bic r3, r3, #0x3 @ clear lower bits + orr r3, r3, r0 @ new state value + str r3, [r4] @ set new state (pll/x, x=1 or 2) + nop + nop + + moveq r9, #0x1 @ if speed down, post down, drop volt + bleq voltage_shift_c + + mcr p15, 0, r3, c7, c10, 4 @ memory barrier + str r5, [r6] @ set new RFR_1 value + add r6, r6, #0x30 @ get RFR_2 addr + str r5, [r6] @ set RFR_2 + nop + cmp r2, #0x1 @ (SDR or DDR) do we need to adjust DLL + bne freq_out @ leave if SDR, no DLL function + + /* With DDR, we need to take care of the DLL for the frequency change */ + ldr r2, ddr_sdrc_dlla_ctrl @ addr of dlla ctrl + str r1, [r2] @ write out new SDRC_DLLA_CTRL + add r2, r2, #0x8 @ addr to SDRC_DLLB_CTRL + str r1, [r2] @ commit to SDRC_DLLB_CTRL + mov r1, #0x2000 @ wait DLL relock, min 0x400 L3 clocks +dll_wait: + subs r1, r1, #0x1 + bne dll_wait +freq_out: + ldmfd sp!, {r0 - r10, pc} @ restore regs and return + + /* + * shift up or down voltage, use R9 as input to tell level. + * wait for it to finish, use 32k sync counter, 1tick=31uS. + */ +voltage_shift_c: + ldr r10, ddr_prcm_voltctrl @ get addr of volt ctrl + ldr r8, [r10] @ get value + ldr r7, ddr_prcm_mask_val @ get value of mask + and r8, r8, r7 @ apply mask to clear bits + orr r8, r8, r9 @ bulld value for L0/L1-volt operation. + str r8, [r10] @ set up for change. + mov r7, #0x4000 @ get val for force + orr r8, r8, r7 @ build value for force + str r8, [r10] @ Force transition to L1 + + ldr r10, ddr_timer_32ksynct @ get addr of counter + ldr r8, [r10] @ get value + add r8, r8, #0x2 @ give it at most 62uS (min 31+) +volt_delay_c: + ldr r7, [r10] @ get timer value + cmp r8, r7 @ time up? + bhi volt_delay_c @ not yet->branch + mov pc, lr @ back to caller + +ddr_cm_clksel2_pll: + .word CM_CLKSEL2_PLL_V +ddr_sdrc_dlla_ctrl: + .word SDRC_DLLA_CTRL_V +ddr_sdrc_rfr_ctrl: + .word SDRC_RFR_CTRL_V +ddr_prcm_voltctrl: + .word PRCM_VOLTCTRL_V +ddr_prcm_mask_val: + .word 0xFFFF3FFC +ddr_timer_32ksynct: + .word TIMER_32KSYNCT_CR_V + +ENTRY(sram_reprogram_sdrc_sz) + .word . - sram_reprogram_sdrc + +/* + * Set dividers and pll. Also recalculate DLL value for DDR and unlock mode. + */ +ENTRY(sram_set_prcm) + stmfd sp!, {r0-r12, lr} @ regs to stack + adr r4, pbegin @ addr of preload start + adr r8, pend @ addr of preload end + mcrr p15, 1, r8, r4, c12 @ preload into icache +pbegin: + /* move into fast relock bypass */ + ldr r8, pll_ctl @ get addr + ldr r5, [r8] @ get val + mvn r6, #0x3 @ clear mask + and r5, r5, r6 @ clear field + orr r7, r5, #0x2 @ fast relock val + str r7, [r8] @ go to fast relock + ldr r4, pll_stat @ addr of stat +block: + /* wait for bypass */ + ldr r8, [r4] @ stat value + and r8, r8, #0x3 @ mask for stat + cmp r8, #0x1 @ there yet + bne block @ loop if not + + /* set new dpll dividers _after_ in bypass */ + ldr r4, pll_div @ get addr + str r0, [r4] @ set dpll ctrl val + + ldr r4, set_config @ get addr + mov r8, #1 @ valid cfg msk + str r8, [r4] @ make dividers take + + mov r4, #100 @ dead spin a bit +wait_a_bit: + subs r4, r4, #1 @ dec loop + bne wait_a_bit @ delay done? + + /* check if staying in bypass */ + cmp r2, #0x1 @ stay in bypass? + beq pend @ jump over dpll relock + + /* relock DPLL with new vals */ + ldr r5, pll_stat @ get addr + ldr r4, pll_ctl @ get addr + orr r8, r7, #0x3 @ val for lock dpll + str r8, [r4] @ set val + mov r0, #1000 @ dead spin a bit +wait_more: + subs r0, r0, #1 @ dec loop + bne wait_more @ delay done? +wait_lock: + ldr r8, [r5] @ get lock val + and r8, r8, #3 @ isolate field + cmp r8, #2 @ locked? + bne wait_lock @ wait if not +pend: + /* update memory timings & briefly lock dll */ + ldr r4, sdrc_rfr @ get addr + str r1, [r4] @ update refresh timing + ldr r11, dlla_ctrl @ get addr of DLLA ctrl + ldr r10, [r11] @ get current val + mvn r9, #0x4 @ mask to get clear bit2 + and r10, r10, r9 @ clear bit2 for lock mode + orr r10, r10, #0x8 @ make sure DLL on (es2 bit pos) + str r10, [r11] @ commit to DLLA_CTRL + add r11, r11, #0x8 @ move to dllb + str r10, [r11] @ hit DLLB also + + mov r4, #0x800 @ relock time (min 0x400 L3 clocks) +wait_dll_lock: + subs r4, r4, #0x1 + bne wait_dll_lock + nop + ldmfd sp!, {r0-r12, pc} @ restore regs and return + +set_config: + .word PRCM_CLKCFG_CTRL_V +pll_ctl: + .word CM_CLKEN_PLL_V +pll_stat: + .word CM_IDLEST_CKGEN_V +pll_div: + .word CM_CLKSEL1_PLL_V +sdrc_rfr: + .word SDRC_RFR_CTRL_V +dlla_ctrl: + .word SDRC_DLLA_CTRL_V + +ENTRY(sram_set_prcm_sz) + .word . - sram_set_prcm diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c new file mode 100644 index 000000000000..9ec11443200f --- /dev/null +++ b/arch/arm/mach-omap2/timer-gp.c @@ -0,0 +1,126 @@ +/* + * linux/arch/arm/mach-omap2/timer-gp.c + * + * OMAP2 GP timer support. + * + * Copyright (C) 2005 Nokia Corporation + * Author: Paul Mundt + * Juha Yrjölä + * + * Some parts based off of TI's 24xx code: + * + * Copyright (C) 2004 Texas Instruments, Inc. + * + * Roughly modelled after the OMAP1 MPU timer code. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#define OMAP2_GP_TIMER1_BASE 0x48028000 +#define OMAP2_GP_TIMER2_BASE 0x4802a000 +#define OMAP2_GP_TIMER3_BASE 0x48078000 +#define OMAP2_GP_TIMER4_BASE 0x4807a000 + +#define GP_TIMER_TIDR 0x00 +#define GP_TIMER_TISR 0x18 +#define GP_TIMER_TIER 0x1c +#define GP_TIMER_TCLR 0x24 +#define GP_TIMER_TCRR 0x28 +#define GP_TIMER_TLDR 0x2c +#define GP_TIMER_TSICR 0x40 + +#define OS_TIMER_NR 1 /* GP timer 2 */ + +static unsigned long timer_base[] = { + IO_ADDRESS(OMAP2_GP_TIMER1_BASE), + IO_ADDRESS(OMAP2_GP_TIMER2_BASE), + IO_ADDRESS(OMAP2_GP_TIMER3_BASE), + IO_ADDRESS(OMAP2_GP_TIMER4_BASE), +}; + +static inline unsigned int timer_read_reg(int nr, unsigned int reg) +{ + return __raw_readl(timer_base[nr] + reg); +} + +static inline void timer_write_reg(int nr, unsigned int reg, unsigned int val) +{ + __raw_writel(val, timer_base[nr] + reg); +} + +/* Note that we always enable the clock prescale divider bit */ +static inline void omap2_gp_timer_start(int nr, unsigned long load_val) +{ + unsigned int tmp; + + tmp = 0xffffffff - load_val; + + timer_write_reg(nr, GP_TIMER_TLDR, tmp); + timer_write_reg(nr, GP_TIMER_TCRR, tmp); + timer_write_reg(nr, GP_TIMER_TIER, 1 << 1); + timer_write_reg(nr, GP_TIMER_TCLR, (1 << 5) | (1 << 1) | 1); +} + +static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id, + struct pt_regs *regs) +{ + write_seqlock(&xtime_lock); + + timer_write_reg(OS_TIMER_NR, GP_TIMER_TISR, 1 << 1); + timer_tick(regs); + + write_sequnlock(&xtime_lock); + + return IRQ_HANDLED; +} + +static struct irqaction omap2_gp_timer_irq = { + .name = "gp timer", + .flags = SA_INTERRUPT, + .handler = omap2_gp_timer_interrupt, +}; + +static void __init omap2_gp_timer_init(void) +{ + struct clk * sys_ck; + u32 tick_period = 120000; + u32 l; + + /* Reset clock and prescale value */ + timer_write_reg(OS_TIMER_NR, GP_TIMER_TCLR, 0); + + sys_ck = clk_get(NULL, "sys_ck"); + if (IS_ERR(sys_ck)) + printk(KERN_ERR "Could not get sys_ck\n"); + else { + clk_use(sys_ck); + tick_period = clk_get_rate(sys_ck) / 100; + clk_put(sys_ck); + } + + tick_period /= 2; /* Minimum prescale divider is 2 */ + tick_period -= 1; + + l = timer_read_reg(OS_TIMER_NR, GP_TIMER_TIDR); + printk(KERN_INFO "OMAP2 GP timer (HW version %d.%d)\n", + (l >> 4) & 0x0f, l & 0x0f); + + setup_irq(38, &omap2_gp_timer_irq); + + omap2_gp_timer_start(OS_TIMER_NR, tick_period); +} + +struct sys_timer omap_timer = { + .init = omap2_gp_timer_init, +}; + diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 4e8d19318d22..e84fdde6edf8 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -242,7 +242,7 @@ config CPU_XSCALE # ARMv6 config CPU_V6 bool "Support ARM V6 processor" - depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB + depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 select CPU_32v6 select CPU_ABRT_EV6 select CPU_CACHE_V6 -- cgit v1.2.2 From 046d6b28ebce92aab2865aa3eb3a0d8ede57e17e Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 10 Nov 2005 14:26:52 +0000 Subject: [ARM] 3146/1: OMAP 3b/5: Add omap24xx clock framework Patch from Tony Lindgren This patch adds omap24xx specific clock code by Richard Woodruff, Nishant Menon, Tony Lindgren et al. Signed-off-by: Tony Lindgren Signed-off-by: Russell King --- arch/arm/mach-omap2/clock.c | 1129 +++++++++++++++++++++++ arch/arm/mach-omap2/clock.h | 2103 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 3232 insertions(+) create mode 100644 arch/arm/mach-omap2/clock.c create mode 100644 arch/arm/mach-omap2/clock.h (limited to 'arch') diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c new file mode 100644 index 000000000000..85818d9f2635 --- /dev/null +++ b/arch/arm/mach-omap2/clock.c @@ -0,0 +1,1129 @@ +/* + * linux/arch/arm/mach-omap2/clock.c + * + * Copyright (C) 2005 Texas Instruments Inc. + * Richard Woodruff + * Created for OMAP2. + * + * Cleaned up and modified to use omap shared clock framework by + * Tony Lindgren + * + * Based on omap1 clock.c, Copyright (C) 2004 - 2005 Nokia corporation + * Written by Tuukka Tikkanen + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include +#include + +#include "clock.h" + +//#define DOWN_VARIABLE_DPLL 1 /* Experimental */ + +static struct prcm_config *curr_prcm_set; +static struct memory_timings mem_timings; +static u32 curr_perf_level = PRCM_FULL_SPEED; + +/*------------------------------------------------------------------------- + * Omap2 specific clock functions + *-------------------------------------------------------------------------*/ + +/* Recalculate SYST_CLK */ +static void omap2_sys_clk_recalc(struct clk * clk) +{ + u32 div = PRCM_CLKSRC_CTRL; + div &= (1 << 7) | (1 << 6); /* Test if ext clk divided by 1 or 2 */ + div >>= clk->rate_offset; + clk->rate = (clk->parent->rate / div); + propagate_rate(clk); +} + +static u32 omap2_get_dpll_rate(struct clk * tclk) +{ + int dpll_clk, dpll_mult, dpll_div, amult; + + dpll_mult = (CM_CLKSEL1_PLL >> 12) & 0x03ff; /* 10 bits */ + dpll_div = (CM_CLKSEL1_PLL >> 8) & 0x0f; /* 4 bits */ + dpll_clk = (tclk->parent->rate * dpll_mult) / (dpll_div + 1); + amult = CM_CLKSEL2_PLL & 0x3; + dpll_clk *= amult; + + return dpll_clk; +} + +static void omap2_followparent_recalc(struct clk *clk) +{ + followparent_recalc(clk); +} + +static void omap2_propagate_rate(struct clk * clk) +{ + if (!(clk->flags & RATE_FIXED)) + clk->rate = clk->parent->rate; + + propagate_rate(clk); +} + +/* Enable an APLL if off */ +static void omap2_clk_fixed_enable(struct clk *clk) +{ + u32 cval, i=0; + + if (clk->enable_bit == 0xff) /* Parent will do it */ + return; + + cval = CM_CLKEN_PLL; + + if ((cval & (0x3 << clk->enable_bit)) == (0x3 << clk->enable_bit)) + return; + + cval &= ~(0x3 << clk->enable_bit); + cval |= (0x3 << clk->enable_bit); + CM_CLKEN_PLL = cval; + + if (clk == &apll96_ck) + cval = (1 << 8); + else if (clk == &apll54_ck) + cval = (1 << 6); + + while (!CM_IDLEST_CKGEN & cval) { /* Wait for lock */ + ++i; + udelay(1); + if (i == 100000) + break; + } +} + +/* Enables clock without considering parent dependencies or use count + * REVISIT: Maybe change this to use clk->enable like on omap1? + */ +static int omap2_clk_enable(struct clk * clk) +{ + u32 regval32; + + if (clk->flags & ALWAYS_ENABLED) + return 0; + + if (unlikely(clk->enable_reg == 0)) { + printk(KERN_ERR "clock.c: Enable for %s without enable code\n", + clk->name); + return 0; + } + + if (clk->enable_reg == (void __iomem *)&CM_CLKEN_PLL) { + omap2_clk_fixed_enable(clk); + return 0; + } + + regval32 = __raw_readl(clk->enable_reg); + regval32 |= (1 << clk->enable_bit); + __raw_writel(regval32, clk->enable_reg); + + return 0; +} + +/* Stop APLL */ +static void omap2_clk_fixed_disable(struct clk *clk) +{ + u32 cval; + + if(clk->enable_bit == 0xff) /* let parent off do it */ + return; + + cval = CM_CLKEN_PLL; + cval &= ~(0x3 << clk->enable_bit); + CM_CLKEN_PLL = cval; +} + +/* Disables clock without considering parent dependencies or use count */ +static void omap2_clk_disable(struct clk *clk) +{ + u32 regval32; + + if (clk->enable_reg == 0) + return; + + if (clk->enable_reg == (void __iomem *)&CM_CLKEN_PLL) { + omap2_clk_fixed_disable(clk); + return; + } + + regval32 = __raw_readl(clk->enable_reg); + regval32 &= ~(1 << clk->enable_bit); + __raw_writel(regval32, clk->enable_reg); +} + +static int omap2_clk_use(struct clk *clk) +{ + int ret = 0; + + if (clk->usecount++ == 0) { + if (likely((u32)clk->parent)) + ret = omap2_clk_use(clk->parent); + + if (unlikely(ret != 0)) { + clk->usecount--; + return ret; + } + + ret = omap2_clk_enable(clk); + + if (unlikely(ret != 0) && clk->parent) { + omap2_clk_unuse(clk->parent); + clk->usecount--; + } + } + + return ret; +} + +static void omap2_clk_unuse(struct clk *clk) +{ + if (clk->usecount > 0 && !(--clk->usecount)) { + omap2_clk_disable(clk); + if (likely((u32)clk->parent)) + omap2_clk_unuse(clk->parent); + } +} + +/* + * Uses the current prcm set to tell if a rate is valid. + * You can go slower, but not faster within a given rate set. + */ +static u32 omap2_dpll_round_rate(unsigned long target_rate) +{ + u32 high, low; + + if ((CM_CLKSEL2_PLL & 0x3) == 1) { /* DPLL clockout */ + high = curr_prcm_set->dpll_speed * 2; + low = curr_prcm_set->dpll_speed; + } else { /* DPLL clockout x 2 */ + high = curr_prcm_set->dpll_speed; + low = curr_prcm_set->dpll_speed / 2; + } + +#ifdef DOWN_VARIABLE_DPLL + if (target_rate > high) + return high; + else + return target_rate; +#else + if (target_rate > low) + return high; + else + return low; +#endif + +} + +/* + * Used for clocks that are part of CLKSEL_xyz governed clocks. + * REVISIT: Maybe change to use clk->enable() functions like on omap1? + */ +static void omap2_clksel_recalc(struct clk * clk) +{ + u32 fixed = 0, div = 0; + + if (clk == &dpll_ck) { + clk->rate = omap2_get_dpll_rate(clk); + fixed = 1; + div = 0; + } + + if (clk == &iva1_mpu_int_ifck) { + div = 2; + fixed = 1; + } + + if ((clk == &dss1_fck) && ((CM_CLKSEL1_CORE & (0x1f << 8)) == 0)) { + clk->rate = sys_ck.rate; + return; + } + + if (!fixed) { + div = omap2_clksel_get_divisor(clk); + if (div == 0) + return; + } + + if (div != 0) { + if (unlikely(clk->rate == clk->parent->rate / div)) + return; + clk->rate = clk->parent->rate / div; + } + + if (unlikely(clk->flags & RATE_PROPAGATES)) + propagate_rate(clk); +} + +/* + * Finds best divider value in an array based on the source and target + * rates. The divider array must be sorted with smallest divider first. + */ +static inline u32 omap2_divider_from_table(u32 size, u32 *div_array, + u32 src_rate, u32 tgt_rate) +{ + int i, test_rate; + + if (div_array == NULL) + return ~1; + + for (i=0; i < size; i++) { + test_rate = src_rate / *div_array; + if (test_rate <= tgt_rate) + return *div_array; + ++div_array; + } + + return ~0; /* No acceptable divider */ +} + +/* + * Find divisor for the given clock and target rate. + * + * Note that this will not work for clocks which are part of CONFIG_PARTICIPANT, + * they are only settable as part of virtual_prcm set. + */ +static u32 omap2_clksel_round_rate(struct clk *tclk, u32 target_rate, + u32 *new_div) +{ + u32 gfx_div[] = {2, 3, 4}; + u32 sysclkout_div[] = {1, 2, 4, 8, 16}; + u32 dss1_div[] = {1, 2, 3, 4, 5, 6, 8, 9, 12, 16}; + u32 vylnq_div[] = {1, 2, 3, 4, 6, 8, 9, 12, 16, 18}; + u32 best_div = ~0, asize = 0; + u32 *div_array = NULL; + + switch (tclk->flags & SRC_RATE_SEL_MASK) { + case CM_GFX_SEL1: + asize = 3; + div_array = gfx_div; + break; + case CM_PLL_SEL1: + return omap2_dpll_round_rate(target_rate); + case CM_SYSCLKOUT_SEL1: + asize = 5; + div_array = sysclkout_div; + break; + case CM_CORE_SEL1: + if(tclk == &dss1_fck){ + if(tclk->parent == &core_ck){ + asize = 10; + div_array = dss1_div; + } else { + *new_div = 0; /* fixed clk */ + return(tclk->parent->rate); + } + } else if((tclk == &vlynq_fck) && cpu_is_omap2420()){ + if(tclk->parent == &core_ck){ + asize = 10; + div_array = vylnq_div; + } else { + *new_div = 0; /* fixed clk */ + return(tclk->parent->rate); + } + } + break; + } + + best_div = omap2_divider_from_table(asize, div_array, + tclk->parent->rate, target_rate); + if (best_div == ~0){ + *new_div = 1; + return best_div; /* signal error */ + } + + *new_div = best_div; + return (tclk->parent->rate / best_div); +} + +/* Given a clock and a rate apply a clock specific rounding function */ +static long omap2_clk_round_rate(struct clk *clk, unsigned long rate) +{ + u32 new_div = 0; + int valid_rate; + + if (clk->flags & RATE_FIXED) + return clk->rate; + + if (clk->flags & RATE_CKCTL) { + valid_rate = omap2_clksel_round_rate(clk, rate, &new_div); + return valid_rate; + } + + if (clk->round_rate != 0) + return clk->round_rate(clk, rate); + + return clk->rate; +} + +/* + * Check the DLL lock state, and return tue if running in unlock mode. + * This is needed to compenste for the shifted DLL value in unlock mode. + */ +static u32 omap2_dll_force_needed(void) +{ + u32 dll_state = SDRC_DLLA_CTRL; /* dlla and dllb are a set */ + + if ((dll_state & (1 << 2)) == (1 << 2)) + return 1; + else + return 0; +} + +static void omap2_init_memory_params(u32 force_lock_to_unlock_mode) +{ + unsigned long dll_cnt; + u32 fast_dll = 0; + + mem_timings.m_type = !((SDRC_MR_0 & 0x3) == 0x1); /* DDR = 1, SDR = 0 */ + + /* 2422 es2.05 and beyond has a single SIP DDR instead of 2 like others. + * In the case of 2422, its ok to use CS1 instead of CS0. + */ + +#if 0 /* FIXME: Enable after 24xx cpu detection works */ + ctype = get_cpu_type(); + if (cpu_is_omap2422()) + mem_timings.base_cs = 1; + else +#endif + mem_timings.base_cs = 0; + + if (mem_timings.m_type != M_DDR) + return; + + /* With DDR we need to determine the low frequency DLL value */ + if (((mem_timings.fast_dll_ctrl & (1 << 2)) == M_LOCK_CTRL)) + mem_timings.dll_mode = M_UNLOCK; + else + mem_timings.dll_mode = M_LOCK; + + if (mem_timings.base_cs == 0) { + fast_dll = SDRC_DLLA_CTRL; + dll_cnt = SDRC_DLLA_STATUS & 0xff00; + } else { + fast_dll = SDRC_DLLB_CTRL; + dll_cnt = SDRC_DLLB_STATUS & 0xff00; + } + if (force_lock_to_unlock_mode) { + fast_dll &= ~0xff00; + fast_dll |= dll_cnt; /* Current lock mode */ + } + mem_timings.fast_dll_ctrl = fast_dll; + + /* No disruptions, DDR will be offline & C-ABI not followed */ + omap2_sram_ddr_init(&mem_timings.slow_dll_ctrl, + mem_timings.fast_dll_ctrl, + mem_timings.base_cs, + force_lock_to_unlock_mode); + mem_timings.slow_dll_ctrl &= 0xff00; /* Keep lock value */ + + /* Turn status into unlock ctrl */ + mem_timings.slow_dll_ctrl |= + ((mem_timings.fast_dll_ctrl & 0xF) | (1 << 2)); + + /* 90 degree phase for anything below 133Mhz */ + mem_timings.slow_dll_ctrl |= (1 << 1); +} + +static u32 omap2_reprogram_sdrc(u32 level, u32 force) +{ + u32 prev = curr_perf_level, flags; + + if ((curr_perf_level == level) && !force) + return prev; + + if (level == PRCM_HALF_SPEED) { + local_irq_save(flags); + PRCM_VOLTSETUP = 0xffff; + omap2_sram_reprogram_sdrc(PRCM_HALF_SPEED, + mem_timings.slow_dll_ctrl, + mem_timings.m_type); + curr_perf_level = PRCM_HALF_SPEED; + local_irq_restore(flags); + } + if (level == PRCM_FULL_SPEED) { + local_irq_save(flags); + PRCM_VOLTSETUP = 0xffff; + omap2_sram_reprogram_sdrc(PRCM_FULL_SPEED, + mem_timings.fast_dll_ctrl, + mem_timings.m_type); + curr_perf_level = PRCM_FULL_SPEED; + local_irq_restore(flags); + } + + return prev; +} + +static int omap2_reprogram_dpll(struct clk * clk, unsigned long rate) +{ + u32 flags, cur_rate, low, mult, div, valid_rate, done_rate; + u32 bypass = 0; + struct prcm_config tmpset; + int ret = -EINVAL; + + local_irq_save(flags); + cur_rate = omap2_get_dpll_rate(&dpll_ck); + mult = CM_CLKSEL2_PLL & 0x3; + + if ((rate == (cur_rate / 2)) && (mult == 2)) { + omap2_reprogram_sdrc(PRCM_HALF_SPEED, 1); + } else if ((rate == (cur_rate * 2)) && (mult == 1)) { + omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1); + } else if (rate != cur_rate) { + valid_rate = omap2_dpll_round_rate(rate); + if (valid_rate != rate) + goto dpll_exit; + + if ((CM_CLKSEL2_PLL & 0x3) == 1) + low = curr_prcm_set->dpll_speed; + else + low = curr_prcm_set->dpll_speed / 2; + + tmpset.cm_clksel1_pll = CM_CLKSEL1_PLL; + tmpset.cm_clksel1_pll &= ~(0x3FFF << 8); + div = ((curr_prcm_set->xtal_speed / 1000000) - 1); + tmpset.cm_clksel2_pll = CM_CLKSEL2_PLL; + tmpset.cm_clksel2_pll &= ~0x3; + if (rate > low) { + tmpset.cm_clksel2_pll |= 0x2; + mult = ((rate / 2) / 1000000); + done_rate = PRCM_FULL_SPEED; + } else { + tmpset.cm_clksel2_pll |= 0x1; + mult = (rate / 1000000); + done_rate = PRCM_HALF_SPEED; + } + tmpset.cm_clksel1_pll |= ((div << 8) | (mult << 12)); + + /* Worst case */ + tmpset.base_sdrc_rfr = V24XX_SDRC_RFR_CTRL_BYPASS; + + if (rate == curr_prcm_set->xtal_speed) /* If asking for 1-1 */ + bypass = 1; + + omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1); /* For init_mem */ + + /* Force dll lock mode */ + omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr, + bypass); + + /* Errata: ret dll entry state */ + omap2_init_memory_params(omap2_dll_force_needed()); + omap2_reprogram_sdrc(done_rate, 0); + } + omap2_clksel_recalc(&dpll_ck); + ret = 0; + +dpll_exit: + local_irq_restore(flags); + return(ret); +} + +/* Just return the MPU speed */ +static void omap2_mpu_recalc(struct clk * clk) +{ + clk->rate = curr_prcm_set->mpu_speed; +} + +/* + * Look for a rate equal or less than the target rate given a configuration set. + * + * What's not entirely clear is "which" field represents the key field. + * Some might argue L3-DDR, others ARM, others IVA. This code is simple and + * just uses the ARM rates. + */ +static long omap2_round_to_table_rate(struct clk * clk, unsigned long rate) +{ + struct prcm_config * ptr; + long highest_rate; + + if (clk != &virt_prcm_set) + return -EINVAL; + + highest_rate = -EINVAL; + + for (ptr = rate_table; ptr->mpu_speed; ptr++) { + if (ptr->xtal_speed != sys_ck.rate) + continue; + + highest_rate = ptr->mpu_speed; + + /* Can check only after xtal frequency check */ + if (ptr->mpu_speed <= rate) + break; + } + return highest_rate; +} + +/* + * omap2_convert_field_to_div() - turn field value into integer divider + */ +static u32 omap2_clksel_to_divisor(u32 div_sel, u32 field_val) +{ + u32 i; + u32 clkout_array[] = {1, 2, 4, 8, 16}; + + if ((div_sel & SRC_RATE_SEL_MASK) == CM_SYSCLKOUT_SEL1) { + for (i = 0; i < 5; i++) { + if (field_val == i) + return clkout_array[i]; + } + return ~0; + } else + return field_val; +} + +/* + * Returns the CLKSEL divider register value + * REVISIT: This should be cleaned up to work nicely with void __iomem * + */ +static u32 omap2_get_clksel(u32 *div_sel, u32 *field_mask, + struct clk *clk) +{ + int ret = ~0; + u32 reg_val, div_off; + u32 div_addr = 0; + u32 mask = ~0; + + div_off = clk->rate_offset; + + switch ((*div_sel & SRC_RATE_SEL_MASK)) { + case CM_MPU_SEL1: + div_addr = (u32)&CM_CLKSEL_MPU; + mask = 0x1f; + break; + case CM_DSP_SEL1: + div_addr = (u32)&CM_CLKSEL_DSP; + if (cpu_is_omap2420()) { + if ((div_off == 0) || (div_off == 8)) + mask = 0x1f; + else if (div_off == 5) + mask = 0x3; + } else if (cpu_is_omap2430()) { + if (div_off == 0) + mask = 0x1f; + else if (div_off == 5) + mask = 0x3; + } + break; + case CM_GFX_SEL1: + div_addr = (u32)&CM_CLKSEL_GFX; + if (div_off == 0) + mask = 0x7; + break; + case CM_MODEM_SEL1: + div_addr = (u32)&CM_CLKSEL_MDM; + if (div_off == 0) + mask = 0xf; + break; + case CM_SYSCLKOUT_SEL1: + div_addr = (u32)&PRCM_CLKOUT_CTRL; + if ((div_off == 3) || (div_off = 11)) + mask= 0x3; + break; + case CM_CORE_SEL1: + div_addr = (u32)&CM_CLKSEL1_CORE; + switch (div_off) { + case 0: /* l3 */ + case 8: /* dss1 */ + case 15: /* vylnc-2420 */ + case 20: /* ssi */ + mask = 0x1f; break; + case 5: /* l4 */ + mask = 0x3; break; + case 13: /* dss2 */ + mask = 0x1; break; + case 25: /* usb */ + mask = 0xf; break; + } + } + + *field_mask = mask; + + if (unlikely(mask == ~0)) + div_addr = 0; + + *div_sel = div_addr; + + if (unlikely(div_addr == 0)) + return ret; + + /* Isolate field */ + reg_val = __raw_readl((void __iomem *)div_addr) & (mask << div_off); + + /* Normalize back to divider value */ + reg_val >>= div_off; + + return reg_val; +} + +/* + * Return divider to be applied to parent clock. + * Return 0 on error. + */ +static u32 omap2_clksel_get_divisor(struct clk *clk) +{ + int ret = 0; + u32 div, div_sel, div_off, field_mask, field_val; + + /* isolate control register */ + div_sel = (SRC_RATE_SEL_MASK & clk->flags); + + div_off = clk->rate_offset; + field_val = omap2_get_clksel(&div_sel, &field_mask, clk); + if (div_sel == 0) + return ret; + + div_sel = (SRC_RATE_SEL_MASK & clk->flags); + div = omap2_clksel_to_divisor(div_sel, field_val); + + return div; +} + +/* Set the clock rate for a clock source */ +static int omap2_clk_set_rate(struct clk *clk, unsigned long rate) + +{ + int ret = -EINVAL; + void __iomem * reg; + u32 div_sel, div_off, field_mask, field_val, reg_val, validrate; + u32 new_div = 0; + + if (!(clk->flags & CONFIG_PARTICIPANT) && (clk->flags & RATE_CKCTL)) { + if (clk == &dpll_ck) + return omap2_reprogram_dpll(clk, rate); + + /* Isolate control register */ + div_sel = (SRC_RATE_SEL_MASK & clk->flags); + div_off = clk->src_offset; + + validrate = omap2_clksel_round_rate(clk, rate, &new_div); + if(validrate != rate) + return(ret); + + field_val = omap2_get_clksel(&div_sel, &field_mask, clk); + if (div_sel == 0) + return ret; + + if(clk->flags & CM_SYSCLKOUT_SEL1){ + switch(new_div){ + case 16: field_val = 4; break; + case 8: field_val = 3; break; + case 4: field_val = 2; break; + case 2: field_val = 1; break; + case 1: field_val = 0; break; + } + } + else + field_val = new_div; + + reg = (void __iomem *)div_sel; + + reg_val = __raw_readl(reg); + reg_val &= ~(field_mask << div_off); + reg_val |= (field_val << div_off); + + __raw_writel(reg_val, reg); + clk->rate = clk->parent->rate / field_val; + + if (clk->flags & DELAYED_APP) + __raw_writel(0x1, (void __iomem *)&PRCM_CLKCFG_CTRL); + ret = 0; + } else if (clk->set_rate != 0) + ret = clk->set_rate(clk, rate); + + if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES))) + propagate_rate(clk); + + return ret; +} + +/* Converts encoded control register address into a full address */ +static u32 omap2_get_src_field(u32 *type_to_addr, u32 reg_offset, + struct clk *src_clk, u32 *field_mask) +{ + u32 val = ~0, src_reg_addr = 0, mask = 0; + + /* Find target control register.*/ + switch ((*type_to_addr & SRC_RATE_SEL_MASK)) { + case CM_CORE_SEL1: + src_reg_addr = (u32)&CM_CLKSEL1_CORE; + if (reg_offset == 13) { /* DSS2_fclk */ + mask = 0x1; + if (src_clk == &sys_ck) + val = 0; + if (src_clk == &func_48m_ck) + val = 1; + } else if (reg_offset == 8) { /* DSS1_fclk */ + mask = 0x1f; + if (src_clk == &sys_ck) + val = 0; + else if (src_clk == &core_ck) /* divided clock */ + val = 0x10; /* rate needs fixing */ + } else if ((reg_offset == 15) && cpu_is_omap2420()){ /*vlnyq*/ + mask = 0x1F; + if(src_clk == &func_96m_ck) + val = 0; + else if (src_clk == &core_ck) + val = 0x10; + } + break; + case CM_CORE_SEL2: + src_reg_addr = (u32)&CM_CLKSEL2_CORE; + mask = 0x3; + if (src_clk == &func_32k_ck) + val = 0x0; + if (src_clk == &sys_ck) + val = 0x1; + if (src_clk == &alt_ck) + val = 0x2; + break; + case CM_WKUP_SEL1: + src_reg_addr = (u32)&CM_CLKSEL2_CORE; + mask = 0x3; + if (src_clk == &func_32k_ck) + val = 0x0; + if (src_clk == &sys_ck) + val = 0x1; + if (src_clk == &alt_ck) + val = 0x2; + break; + case CM_PLL_SEL1: + src_reg_addr = (u32)&CM_CLKSEL1_PLL; + mask = 0x1; + if (reg_offset == 0x3) { + if (src_clk == &apll96_ck) + val = 0; + if (src_clk == &alt_ck) + val = 1; + } + else if (reg_offset == 0x5) { + if (src_clk == &apll54_ck) + val = 0; + if (src_clk == &alt_ck) + val = 1; + } + break; + case CM_PLL_SEL2: + src_reg_addr = (u32)&CM_CLKSEL2_PLL; + mask = 0x3; + if (src_clk == &func_32k_ck) + val = 0x0; + if (src_clk == &dpll_ck) + val = 0x2; + break; + case CM_SYSCLKOUT_SEL1: + src_reg_addr = (u32)&PRCM_CLKOUT_CTRL; + mask = 0x3; + if (src_clk == &dpll_ck) + val = 0; + if (src_clk == &sys_ck) + val = 1; + if (src_clk == &func_54m_ck) + val = 2; + if (src_clk == &func_96m_ck) + val = 3; + break; + } + + if (val == ~0) /* Catch errors in offset */ + *type_to_addr = 0; + else + *type_to_addr = src_reg_addr; + *field_mask = mask; + + return val; +} + +static int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent) +{ + void __iomem * reg; + u32 src_sel, src_off, field_val, field_mask, reg_val, rate; + int ret = -EINVAL; + + if (unlikely(clk->flags & CONFIG_PARTICIPANT)) + return ret; + + if (clk->flags & SRC_SEL_MASK) { /* On-chip SEL collection */ + src_sel = (SRC_RATE_SEL_MASK & clk->flags); + src_off = clk->src_offset; + + if (src_sel == 0) + goto set_parent_error; + + field_val = omap2_get_src_field(&src_sel, src_off, new_parent, + &field_mask); + + reg = (void __iomem *)src_sel; + + if (clk->usecount > 0) + omap2_clk_disable(clk); + + /* Set new source value (previous dividers if any in effect) */ + reg_val = __raw_readl(reg) & ~(field_mask << src_off); + reg_val |= (field_val << src_off); + __raw_writel(reg_val, reg); + + if (clk->flags & DELAYED_APP) + __raw_writel(0x1, (void __iomem *)&PRCM_CLKCFG_CTRL); + + if (clk->usecount > 0) + omap2_clk_enable(clk); + + clk->parent = new_parent; + + /* SRC_RATE_SEL_MASK clocks follow their parents rates.*/ + if ((new_parent == &core_ck) && (clk == &dss1_fck)) + clk->rate = new_parent->rate / 0x10; + else + clk->rate = new_parent->rate; + + if (unlikely(clk->flags & RATE_PROPAGATES)) + propagate_rate(clk); + + return 0; + } else { + clk->parent = new_parent; + rate = new_parent->rate; + omap2_clk_set_rate(clk, rate); + ret = 0; + } + + set_parent_error: + return ret; +} + +/* Sets basic clocks based on the specified rate */ +static int omap2_select_table_rate(struct clk * clk, unsigned long rate) +{ + u32 flags, cur_rate, done_rate, bypass = 0; + u8 cpu_mask = 0; + struct prcm_config *prcm; + unsigned long found_speed = 0; + + if (clk != &virt_prcm_set) + return -EINVAL; + + /* FIXME: Change cpu_is_omap2420() to cpu_is_omap242x() */ + if (cpu_is_omap2420()) + cpu_mask = RATE_IN_242X; + else if (cpu_is_omap2430()) + cpu_mask = RATE_IN_243X; + + for (prcm = rate_table; prcm->mpu_speed; prcm++) { + if (!(prcm->flags & cpu_mask)) + continue; + + if (prcm->xtal_speed != sys_ck.rate) + continue; + + if (prcm->mpu_speed <= rate) { + found_speed = prcm->mpu_speed; + break; + } + } + + if (!found_speed) { + printk(KERN_INFO "Could not set MPU rate to %luMHz\n", + rate / 1000000); + return -EINVAL; + } + + curr_prcm_set = prcm; + cur_rate = omap2_get_dpll_rate(&dpll_ck); + + if (prcm->dpll_speed == cur_rate / 2) { + omap2_reprogram_sdrc(PRCM_HALF_SPEED, 1); + } else if (prcm->dpll_speed == cur_rate * 2) { + omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1); + } else if (prcm->dpll_speed != cur_rate) { + local_irq_save(flags); + + if (prcm->dpll_speed == prcm->xtal_speed) + bypass = 1; + + if ((prcm->cm_clksel2_pll & 0x3) == 2) + done_rate = PRCM_FULL_SPEED; + else + done_rate = PRCM_HALF_SPEED; + + /* MPU divider */ + CM_CLKSEL_MPU = prcm->cm_clksel_mpu; + + /* dsp + iva1 div(2420), iva2.1(2430) */ + CM_CLKSEL_DSP = prcm->cm_clksel_dsp; + + CM_CLKSEL_GFX = prcm->cm_clksel_gfx; + + /* Major subsystem dividers */ + CM_CLKSEL1_CORE = prcm->cm_clksel1_core; + if (cpu_is_omap2430()) + CM_CLKSEL_MDM = prcm->cm_clksel_mdm; + + /* x2 to enter init_mem */ + omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1); + + omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr, + bypass); + + omap2_init_memory_params(omap2_dll_force_needed()); + omap2_reprogram_sdrc(done_rate, 0); + + local_irq_restore(flags); + } + omap2_clksel_recalc(&dpll_ck); + + return 0; +} + +/*------------------------------------------------------------------------- + * Omap2 clock reset and init functions + *-------------------------------------------------------------------------*/ + +static struct clk_functions omap2_clk_functions = { + .clk_enable = omap2_clk_enable, + .clk_disable = omap2_clk_disable, + .clk_use = omap2_clk_use, + .clk_unuse = omap2_clk_unuse, + .clk_round_rate = omap2_clk_round_rate, + .clk_set_rate = omap2_clk_set_rate, + .clk_set_parent = omap2_clk_set_parent, +}; + +static void __init omap2_get_crystal_rate(struct clk *osc, struct clk *sys) +{ + u32 div, aplls, sclk = 13000000; + + aplls = CM_CLKSEL1_PLL; + aplls &= ((1 << 23) | (1 << 24) | (1 << 25)); + aplls >>= 23; /* Isolate field, 0,2,3 */ + + if (aplls == 0) + sclk = 19200000; + else if (aplls == 2) + sclk = 13000000; + else if (aplls == 3) + sclk = 12000000; + + div = PRCM_CLKSRC_CTRL; + div &= ((1 << 7) | (1 << 6)); + div >>= sys->rate_offset; + + osc->rate = sclk * div; + sys->rate = sclk; +} + +#ifdef CONFIG_OMAP_RESET_CLOCKS +static void __init omap2_disable_unused_clocks(void) +{ + struct clk *ck; + u32 regval32; + + list_for_each_entry(ck, &clocks, node) { + if (ck->usecount > 0 || (ck->flags & ALWAYS_ENABLED) || + ck->enable_reg == 0) + continue; + + regval32 = __raw_readl(ck->enable_reg); + if ((regval32 & (1 << ck->enable_bit)) == 0) + continue; + + printk(KERN_INFO "Disabling unused clock \"%s\"\n", ck->name); + omap2_clk_disable(ck); + } +} +late_initcall(omap2_disable_unused_clocks); +#endif + +/* + * Switch the MPU rate if specified on cmdline. + * We cannot do this early until cmdline is parsed. + */ +static int __init omap2_clk_arch_init(void) +{ + if (!mpurate) + return -EINVAL; + + if (omap2_select_table_rate(&virt_prcm_set, mpurate)) + printk(KERN_ERR "Could not find matching MPU rate\n"); + + propagate_rate(&osc_ck); /* update main root fast */ + propagate_rate(&func_32k_ck); /* update main root slow */ + + printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL/MPU): " + "%ld.%01ld/%ld/%ld MHz\n", + (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10, + (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ; + + return 0; +} +arch_initcall(omap2_clk_arch_init); + +int __init omap2_clk_init(void) +{ + struct prcm_config *prcm; + struct clk ** clkp; + u32 clkrate; + + clk_init(&omap2_clk_functions); + omap2_get_crystal_rate(&osc_ck, &sys_ck); + + for (clkp = onchip_clks; clkp < onchip_clks + ARRAY_SIZE(onchip_clks); + clkp++) { + + if ((*clkp)->flags & CLOCK_IN_OMAP242X && cpu_is_omap2420()) { + clk_register(*clkp); + continue; + } + + if ((*clkp)->flags & CLOCK_IN_OMAP243X && cpu_is_omap2430()) { + clk_register(*clkp); + continue; + } + } + + /* Check the MPU rate set by bootloader */ + clkrate = omap2_get_dpll_rate(&dpll_ck); + for (prcm = rate_table; prcm->mpu_speed; prcm++) { + if (prcm->xtal_speed != sys_ck.rate) + continue; + if (prcm->dpll_speed <= clkrate) + break; + } + curr_prcm_set = prcm; + + propagate_rate(&osc_ck); /* update main root fast */ + propagate_rate(&func_32k_ck); /* update main root slow */ + + printk(KERN_INFO "Clocking rate (Crystal/DPLL/MPU): " + "%ld.%01ld/%ld/%ld MHz\n", + (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10, + (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ; + + /* + * Only enable those clocks we will need, let the drivers + * enable other clocks as necessary + */ + clk_use(&sync_32k_ick); + clk_use(&omapctrl_ick); + if (cpu_is_omap2430()) + clk_use(&sdrc_ick); + + return 0; +} diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h new file mode 100644 index 000000000000..4aeab5591bd3 --- /dev/null +++ b/arch/arm/mach-omap2/clock.h @@ -0,0 +1,2103 @@ +/* + * linux/arch/arm/mach-omap24xx/clock.h + * + * Copyright (C) 2005 Texas Instruments Inc. + * Richard Woodruff + * Created for OMAP2. + * + * Copyright (C) 2004 Nokia corporation + * Written by Tuukka Tikkanen + * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_H +#define __ARCH_ARM_MACH_OMAP2_CLOCK_H + +static void omap2_sys_clk_recalc(struct clk * clk); +static void omap2_clksel_recalc(struct clk * clk); +static void omap2_followparent_recalc(struct clk * clk); +static void omap2_propagate_rate(struct clk * clk); +static void omap2_mpu_recalc(struct clk * clk); +static int omap2_select_table_rate(struct clk * clk, unsigned long rate); +static long omap2_round_to_table_rate(struct clk * clk, unsigned long rate); +static void omap2_clk_unuse(struct clk *clk); +static void omap2_sys_clk_recalc(struct clk * clk); +static u32 omap2_clksel_to_divisor(u32 div_sel, u32 field_val); +static u32 omap2_clksel_get_divisor(struct clk *clk); + + +#define RATE_IN_242X (1 << 0) +#define RATE_IN_243X (1 << 1) + +/* Memory timings */ +#define M_DDR 1 +#define M_LOCK_CTRL (1 << 2) +#define M_UNLOCK 0 +#define M_LOCK 1 + +struct memory_timings { + u32 m_type; /* ddr = 1, sdr = 0 */ + u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */ + u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */ + u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */ + u32 base_cs; /* base chip select to use for calculations */ +}; + +/* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. + * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP + * CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM + */ +struct prcm_config { + unsigned long xtal_speed; /* crystal rate */ + unsigned long dpll_speed; /* dpll: out*xtal*M/(N-1)table_recalc */ + unsigned long mpu_speed; /* speed of MPU */ + unsigned long cm_clksel_mpu; /* mpu divider */ + unsigned long cm_clksel_dsp; /* dsp+iva1 div(2420), iva2.1(2430) */ + unsigned long cm_clksel_gfx; /* gfx dividers */ + unsigned long cm_clksel1_core; /* major subsystem dividers */ + unsigned long cm_clksel1_pll; /* m,n */ + unsigned long cm_clksel2_pll; /* dpllx1 or x2 out */ + unsigned long cm_clksel_mdm; /* modem dividers 2430 only */ + unsigned long base_sdrc_rfr; /* base refresh timing for a set */ + unsigned char flags; +}; + +/* Mask for clksel which support parent settign in set_rate */ +#define SRC_SEL_MASK (CM_CORE_SEL1 | CM_CORE_SEL2 | CM_WKUP_SEL1 | \ + CM_PLL_SEL1 | CM_PLL_SEL2 | CM_SYSCLKOUT_SEL1) + +/* Mask for clksel regs which support rate operations */ +#define SRC_RATE_SEL_MASK (CM_MPU_SEL1 | CM_DSP_SEL1 | CM_GFX_SEL1 | \ + CM_MODEM_SEL1 | CM_CORE_SEL1 | CM_CORE_SEL2 | \ + CM_WKUP_SEL1 | CM_PLL_SEL1 | CM_PLL_SEL2 | \ + CM_SYSCLKOUT_SEL1) + +/* + * The OMAP2 processor can be run at several discrete 'PRCM configurations'. + * These configurations are characterized by voltage and speed for clocks. + * The device is only validated for certain combinations. One way to express + * these combinations is via the 'ratio's' which the clocks operate with + * respect to each other. These ratio sets are for a given voltage/DPLL + * setting. All configurations can be described by a DPLL setting and a ratio + * There are 3 ratio sets for the 2430 and X ratio sets for 2420. + * + * 2430 differs from 2420 in that there are no more phase synchronizers used. + * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs + * 2430 (iva2.1, NOdsp, mdm) + */ + +/* Core fields for cm_clksel, not ratio governed */ +#define RX_CLKSEL_DSS1 (0x10 << 8) +#define RX_CLKSEL_DSS2 (0x0 << 13) +#define RX_CLKSEL_SSI (0x5 << 20) + +/*------------------------------------------------------------------------- + * Voltage/DPLL ratios + *-------------------------------------------------------------------------*/ + +/* 2430 Ratio's, 2430-Ratio Config 1 */ +#define R1_CLKSEL_L3 (4 << 0) +#define R1_CLKSEL_L4 (2 << 5) +#define R1_CLKSEL_USB (4 << 25) +#define R1_CM_CLKSEL1_CORE_VAL R1_CLKSEL_USB | RX_CLKSEL_SSI | \ + RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ + R1_CLKSEL_L4 | R1_CLKSEL_L3 +#define R1_CLKSEL_MPU (2 << 0) +#define R1_CM_CLKSEL_MPU_VAL R1_CLKSEL_MPU +#define R1_CLKSEL_DSP (2 << 0) +#define R1_CLKSEL_DSP_IF (2 << 5) +#define R1_CM_CLKSEL_DSP_VAL R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF +#define R1_CLKSEL_GFX (2 << 0) +#define R1_CM_CLKSEL_GFX_VAL R1_CLKSEL_GFX +#define R1_CLKSEL_MDM (4 << 0) +#define R1_CM_CLKSEL_MDM_VAL R1_CLKSEL_MDM + +/* 2430-Ratio Config 2 */ +#define R2_CLKSEL_L3 (6 << 0) +#define R2_CLKSEL_L4 (2 << 5) +#define R2_CLKSEL_USB (2 << 25) +#define R2_CM_CLKSEL1_CORE_VAL R2_CLKSEL_USB | RX_CLKSEL_SSI | \ + RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ + R2_CLKSEL_L4 | R2_CLKSEL_L3 +#define R2_CLKSEL_MPU (2 << 0) +#define R2_CM_CLKSEL_MPU_VAL R2_CLKSEL_MPU +#define R2_CLKSEL_DSP (2 << 0) +#define R2_CLKSEL_DSP_IF (3 << 5) +#define R2_CM_CLKSEL_DSP_VAL R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF +#define R2_CLKSEL_GFX (2 << 0) +#define R2_CM_CLKSEL_GFX_VAL R2_CLKSEL_GFX +#define R2_CLKSEL_MDM (6 << 0) +#define R2_CM_CLKSEL_MDM_VAL R2_CLKSEL_MDM + +/* 2430-Ratio Bootm (BYPASS) */ +#define RB_CLKSEL_L3 (1 << 0) +#define RB_CLKSEL_L4 (1 << 5) +#define RB_CLKSEL_USB (1 << 25) +#define RB_CM_CLKSEL1_CORE_VAL RB_CLKSEL_USB | RX_CLKSEL_SSI | \ + RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ + RB_CLKSEL_L4 | RB_CLKSEL_L3 +#define RB_CLKSEL_MPU (1 << 0) +#define RB_CM_CLKSEL_MPU_VAL RB_CLKSEL_MPU +#define RB_CLKSEL_DSP (1 << 0) +#define RB_CLKSEL_DSP_IF (1 << 5) +#define RB_CM_CLKSEL_DSP_VAL RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF +#define RB_CLKSEL_GFX (1 << 0) +#define RB_CM_CLKSEL_GFX_VAL RB_CLKSEL_GFX +#define RB_CLKSEL_MDM (1 << 0) +#define RB_CM_CLKSEL_MDM_VAL RB_CLKSEL_MDM + +/* 2420 Ratio Equivalents */ +#define RXX_CLKSEL_VLYNQ (0x12 << 15) +#define RXX_CLKSEL_SSI (0x8 << 20) + +/* 2420-PRCM III 532MHz core */ +#define RIII_CLKSEL_L3 (4 << 0) /* 133MHz */ +#define RIII_CLKSEL_L4 (2 << 5) /* 66.5MHz */ +#define RIII_CLKSEL_USB (4 << 25) /* 33.25MHz */ +#define RIII_CM_CLKSEL1_CORE_VAL RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \ + RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \ + RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \ + RIII_CLKSEL_L3 +#define RIII_CLKSEL_MPU (2 << 0) /* 266MHz */ +#define RIII_CM_CLKSEL_MPU_VAL RIII_CLKSEL_MPU +#define RIII_CLKSEL_DSP (3 << 0) /* c5x - 177.3MHz */ +#define RIII_CLKSEL_DSP_IF (2 << 5) /* c5x - 88.67MHz */ +#define RIII_SYNC_DSP (1 << 7) /* Enable sync */ +#define RIII_CLKSEL_IVA (6 << 8) /* iva1 - 88.67MHz */ +#define RIII_SYNC_IVA (1 << 13) /* Enable sync */ +#define RIII_CM_CLKSEL_DSP_VAL RIII_SYNC_IVA | RIII_CLKSEL_IVA | \ + RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \ + RIII_CLKSEL_DSP +#define RIII_CLKSEL_GFX (2 << 0) /* 66.5MHz */ +#define RIII_CM_CLKSEL_GFX_VAL RIII_CLKSEL_GFX + +/* 2420-PRCM II 600MHz core */ +#define RII_CLKSEL_L3 (6 << 0) /* 100MHz */ +#define RII_CLKSEL_L4 (2 << 5) /* 50MHz */ +#define RII_CLKSEL_USB (2 << 25) /* 50MHz */ +#define RII_CM_CLKSEL1_CORE_VAL RII_CLKSEL_USB | \ + RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \ + RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ + RII_CLKSEL_L4 | RII_CLKSEL_L3 +#define RII_CLKSEL_MPU (2 << 0) /* 300MHz */ +#define RII_CM_CLKSEL_MPU_VAL RII_CLKSEL_MPU +#define RII_CLKSEL_DSP (3 << 0) /* c5x - 200MHz */ +#define RII_CLKSEL_DSP_IF (2 << 5) /* c5x - 100MHz */ +#define RII_SYNC_DSP (0 << 7) /* Bypass sync */ +#define RII_CLKSEL_IVA (6 << 8) /* iva1 - 200MHz */ +#define RII_SYNC_IVA (0 << 13) /* Bypass sync */ +#define RII_CM_CLKSEL_DSP_VAL RII_SYNC_IVA | RII_CLKSEL_IVA | \ + RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \ + RII_CLKSEL_DSP +#define RII_CLKSEL_GFX (2 << 0) /* 50MHz */ +#define RII_CM_CLKSEL_GFX_VAL RII_CLKSEL_GFX + +/* 2420-PRCM VII (boot) */ +#define RVII_CLKSEL_L3 (1 << 0) +#define RVII_CLKSEL_L4 (1 << 5) +#define RVII_CLKSEL_DSS1 (1 << 8) +#define RVII_CLKSEL_DSS2 (0 << 13) +#define RVII_CLKSEL_VLYNQ (1 << 15) +#define RVII_CLKSEL_SSI (1 << 20) +#define RVII_CLKSEL_USB (1 << 25) + +#define RVII_CM_CLKSEL1_CORE_VAL RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \ + RVII_CLKSEL_VLYNQ | RVII_CLKSEL_DSS2 | \ + RVII_CLKSEL_DSS1 | RVII_CLKSEL_L4 | RVII_CLKSEL_L3 + +#define RVII_CLKSEL_MPU (1 << 0) /* all divide by 1 */ +#define RVII_CM_CLKSEL_MPU_VAL RVII_CLKSEL_MPU + +#define RVII_CLKSEL_DSP (1 << 0) +#define RVII_CLKSEL_DSP_IF (1 << 5) +#define RVII_SYNC_DSP (0 << 7) +#define RVII_CLKSEL_IVA (1 << 8) +#define RVII_SYNC_IVA (0 << 13) +#define RVII_CM_CLKSEL_DSP_VAL RVII_SYNC_IVA | RVII_CLKSEL_IVA | RVII_SYNC_DSP | \ + RVII_CLKSEL_DSP_IF | RVII_CLKSEL_DSP + +#define RVII_CLKSEL_GFX (1 << 0) +#define RVII_CM_CLKSEL_GFX_VAL RVII_CLKSEL_GFX + +/*------------------------------------------------------------------------- + * 2430 Target modes: Along with each configuration the CPU has several + * modes which goes along with them. Modes mainly are the addition of + * describe DPLL combinations to go along with a ratio. + *-------------------------------------------------------------------------*/ + +/* Hardware governed */ +#define MX_48M_SRC (0 << 3) +#define MX_54M_SRC (0 << 5) +#define MX_APLLS_CLIKIN_12 (3 << 23) +#define MX_APLLS_CLIKIN_13 (2 << 23) +#define MX_APLLS_CLIKIN_19_2 (0 << 23) + +/* + * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed + * #2 (ratio1) baseport-target + * #5a (ratio1) baseport-target, target DPLL = 266*2 = 532MHz + */ +#define M5A_DPLL_MULT_12 (133 << 12) +#define M5A_DPLL_DIV_12 (5 << 8) +#define M5A_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ + M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12 +#define M5A_DPLL_MULT_13 (266 << 12) +#define M5A_DPLL_DIV_13 (12 << 8) +#define M5A_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ + M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13 +#define M5A_DPLL_MULT_19 (180 << 12) +#define M5A_DPLL_DIV_19 (12 << 8) +#define M5A_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ + M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \ + MX_APLLS_CLIKIN_19_2 +/* #5b (ratio1) target DPLL = 200*2 = 400MHz */ +#define M5B_DPLL_MULT_12 (50 << 12) +#define M5B_DPLL_DIV_12 (2 << 8) +#define M5B_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ + M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12 +#define M5B_DPLL_MULT_13 (200 << 12) +#define M5B_DPLL_DIV_13 (12 << 8) + +#define M5B_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ + M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13 +#define M5B_DPLL_MULT_19 (125 << 12) +#define M5B_DPLL_DIV_19 (31 << 8) +#define M5B_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ + M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \ + MX_APLLS_CLIKIN_19_2 +/* + * #4 (ratio2) + * #3 (ratio2) baseport-target, target DPLL = 330*2 = 660MHz + */ +#define M3_DPLL_MULT_12 (55 << 12) +#define M3_DPLL_DIV_12 (1 << 8) +#define M3_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ + M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12 +#define M3_DPLL_MULT_13 (330 << 12) +#define M3_DPLL_DIV_13 (12 << 8) +#define M3_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ + M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13 +#define M3_DPLL_MULT_19 (275 << 12) +#define M3_DPLL_DIV_19 (15 << 8) +#define M3_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ + M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \ + MX_APLLS_CLIKIN_19_2 +/* boot (boot) */ +#define MB_DPLL_MULT (1 << 12) +#define MB_DPLL_DIV (0 << 8) +#define MB_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\ + MB_DPLL_MULT | MX_APLLS_CLIKIN_12 + +#define MB_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\ + MB_DPLL_MULT | MX_APLLS_CLIKIN_13 + +#define MB_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\ + MB_DPLL_MULT | MX_APLLS_CLIKIN_19 + +/* + * 2430 - chassis (sedna) + * 165 (ratio1) same as above #2 + * 150 (ratio1) + * 133 (ratio2) same as above #4 + * 110 (ratio2) same as above #3 + * 104 (ratio2) + * boot (boot) + */ + +/* + * 2420 Equivalent - mode registers + * PRCM II , target DPLL = 2*300MHz = 600MHz + */ +#define MII_DPLL_MULT_12 (50 << 12) +#define MII_DPLL_DIV_12 (1 << 8) +#define MII_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ + MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12 +#define MII_DPLL_MULT_13 (300 << 12) +#define MII_DPLL_DIV_13 (12 << 8) +#define MII_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ + MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13 + +/* PRCM III target DPLL = 2*266 = 532MHz*/ +#define MIII_DPLL_MULT_12 (133 << 12) +#define MIII_DPLL_DIV_12 (5 << 8) +#define MIII_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ + MIII_DPLL_DIV_12 | MIII_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12 +#define MIII_DPLL_MULT_13 (266 << 12) +#define MIII_DPLL_DIV_13 (12 << 8) +#define MIII_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ + MIII_DPLL_DIV_13 | MIII_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13 + +/* PRCM VII (boot bypass) */ +#define MVII_CM_CLKSEL1_PLL_12_VAL MB_CM_CLKSEL1_PLL_12_VAL +#define MVII_CM_CLKSEL1_PLL_13_VAL MB_CM_CLKSEL1_PLL_13_VAL + +/* High and low operation value */ +#define MX_CLKSEL2_PLL_2x_VAL (2 << 0) +#define MX_CLKSEL2_PLL_1x_VAL (1 << 0) + +/* + * These represent optimal values for common parts, it won't work for all. + * As long as you scale down, most parameters are still work, they just + * become sub-optimal. The RFR value goes in the oppisite direction. If you + * don't adjust it down as your clock period increases the refresh interval + * will not be met. Setting all parameters for complete worst case may work, + * but may cut memory performance by 2x. Due to errata the DLLs need to be + * unlocked and their value needs run time calibration. A dynamic call is + * need for that as no single right value exists acorss production samples. + * + * Only the FULL speed values are given. Current code is such that rate + * changes must be made at DPLLoutx2. The actual value adjustment for low + * frequency operation will be handled by omap_set_performance() + * + * By having the boot loader boot up in the fastest L4 speed available likely + * will result in something which you can switch between. + */ +#define V24XX_SDRC_RFR_CTRL_133MHz (0x0003de00 | 1) +#define V24XX_SDRC_RFR_CTRL_100MHz (0x0002da01 | 1) +#define V24XX_SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */ +#define V24XX_SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */ + +/* MPU speed defines */ +#define S12M 12000000 +#define S13M 13000000 +#define S19M 19200000 +#define S26M 26000000 +#define S100M 100000000 +#define S133M 133000000 +#define S150M 150000000 +#define S165M 165000000 +#define S200M 200000000 +#define S266M 266000000 +#define S300M 300000000 +#define S330M 330000000 +#define S400M 400000000 +#define S532M 532000000 +#define S600M 600000000 +#define S660M 660000000 + +/*------------------------------------------------------------------------- + * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. + * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU, + * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL, + * CM_CLKSEL2_PLL, CM_CLKSEL_MDM + * + * Filling in table based on H4 boards and 2430-SDPs variants available. + * There are quite a few more rates combinations which could be defined. + * + * When multiple values are defiend the start up will try and choose the + * fastest one. If a 'fast' value is defined, then automatically, the /2 + * one should be included as it can be used. Generally having more that + * one fast set does not make sense, as static timings need to be changed + * to change the set. The exception is the bypass setting which is + * availble for low power bypass. + * + * Note: This table needs to be sorted, fastest to slowest. + *-------------------------------------------------------------------------*/ +static struct prcm_config rate_table[] = { + /* PRCM II - FAST */ + {S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */ + RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, + RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz, + RATE_IN_242X}, + + {S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */ + RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, + RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz, + RATE_IN_242X}, + + /* PRCM III - FAST */ + {S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ + RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, + RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz, + RATE_IN_242X}, + + {S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ + RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, + RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz, + RATE_IN_242X}, + + /* PRCM II - SLOW */ + {S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */ + RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, + RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz, + RATE_IN_242X}, + + {S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */ + RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, + RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz, + RATE_IN_242X}, + + /* PRCM III - SLOW */ + {S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ + RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, + RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz, + RATE_IN_242X}, + + {S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ + RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, + RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz, + RATE_IN_242X}, + + /* PRCM-VII (boot-bypass) */ + {S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL, /* 12MHz ARM*/ + RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL, + RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_BYPASS, + RATE_IN_242X}, + + /* PRCM-VII (boot-bypass) */ + {S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL, /* 13MHz ARM */ + RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL, + RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_BYPASS, + RATE_IN_242X}, + + /* PRCM #3 - ratio2 (ES2) - FAST */ + {S13M, S660M, S330M, R2_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */ + R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL, + R2_CM_CLKSEL1_CORE_VAL, M3_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL, + V24XX_SDRC_RFR_CTRL_110MHz, + RATE_IN_243X}, + + /* PRCM #5a - ratio1 - FAST */ + {S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, + V24XX_SDRC_RFR_CTRL_133MHz, + RATE_IN_243X}, + + /* PRCM #5b - ratio1 - FAST */ + {S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, + V24XX_SDRC_RFR_CTRL_100MHz, + RATE_IN_243X}, + + /* PRCM #3 - ratio2 (ES2) - SLOW */ + {S13M, S330M, S165M, R2_CM_CLKSEL_MPU_VAL, /* 165MHz ARM */ + R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL, + R2_CM_CLKSEL1_CORE_VAL, M3_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL, + V24XX_SDRC_RFR_CTRL_110MHz, + RATE_IN_243X}, + + /* PRCM #5a - ratio1 - SLOW */ + {S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, + V24XX_SDRC_RFR_CTRL_133MHz, + RATE_IN_243X}, + + /* PRCM #5b - ratio1 - SLOW*/ + {S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL, /* 100MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, + V24XX_SDRC_RFR_CTRL_100MHz, + RATE_IN_243X}, + + /* PRCM-boot/bypass */ + {S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL, /* 13Mhz */ + RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, + RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, + V24XX_SDRC_RFR_CTRL_BYPASS, + RATE_IN_243X}, + + /* PRCM-boot/bypass */ + {S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL, /* 12Mhz */ + RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, + RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, + V24XX_SDRC_RFR_CTRL_BYPASS, + RATE_IN_243X}, + + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, +}; + +/*------------------------------------------------------------------------- + * 24xx clock tree. + * + * NOTE:In many cases here we are assigning a 'default' parent. In many + * cases the parent is selectable. The get/set parent calls will also + * switch sources. + * + * Many some clocks say always_enabled, but they can be auto idled for + * power savings. They will always be available upon clock request. + * + * Several sources are given initial rates which may be wrong, this will + * be fixed up in the init func. + * + * Things are broadly separated below by clock domains. It is + * noteworthy that most periferals have dependencies on multiple clock + * domains. Many get their interface clocks from the L4 domain, but get + * functional clocks from fixed sources or other core domain derived + * clocks. + *-------------------------------------------------------------------------*/ + +/* Base external input clocks */ +static struct clk func_32k_ck = { + .name = "func_32k_ck", + .rate = 32000, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_FIXED | ALWAYS_ENABLED, +}; + +/* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */ +static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */ + .name = "osc_ck", + .rate = 26000000, /* fixed up in clock init */ + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES, +}; + +/* With out modem likely 12MHz, with modem likely 13MHz */ +static struct clk sys_ck = { /* (*12, *13, 19.2, 26, 38.4)MHz */ + .name = "sys_ck", /* ~ ref_clk also */ + .parent = &osc_ck, + .rate = 13000000, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES, + .rate_offset = 6, /* sysclkdiv 1 or 2, already handled or no boot */ + .recalc = &omap2_sys_clk_recalc, +}; + +static struct clk alt_ck = { /* Typical 54M or 48M, may not exist */ + .name = "alt_ck", + .rate = 54000000, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES, + .recalc = &omap2_propagate_rate, +}; + +/* + * Analog domain root source clocks + */ + +/* dpll_ck, is broken out in to special cases through clksel */ +static struct clk dpll_ck = { + .name = "dpll_ck", + .parent = &sys_ck, /* Can be func_32k also */ + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_PROPAGATES | RATE_CKCTL | CM_PLL_SEL1, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk apll96_ck = { + .name = "apll96_ck", + .parent = &sys_ck, + .rate = 96000000, + .flags = CLOCK_IN_OMAP242X |CLOCK_IN_OMAP243X | + RATE_FIXED | RATE_PROPAGATES, + .enable_reg = (void __iomem *)&CM_CLKEN_PLL, + .enable_bit = 0x2, + .recalc = &omap2_propagate_rate, +}; + +static struct clk apll54_ck = { + .name = "apll54_ck", + .parent = &sys_ck, + .rate = 54000000, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_FIXED | RATE_PROPAGATES, + .enable_reg = (void __iomem *)&CM_CLKEN_PLL, + .enable_bit = 0x6, + .recalc = &omap2_propagate_rate, +}; + +/* + * PRCM digital base sources + */ +static struct clk func_54m_ck = { + .name = "func_54m_ck", + .parent = &apll54_ck, /* can also be alt_clk */ + .rate = 54000000, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_FIXED | CM_PLL_SEL1 | RATE_PROPAGATES, + .src_offset = 5, + .enable_reg = (void __iomem *)&CM_CLKEN_PLL, + .enable_bit = 0xff, + .recalc = &omap2_propagate_rate, +}; + +static struct clk core_ck = { + .name = "core_ck", + .parent = &dpll_ck, /* can also be 32k */ + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + ALWAYS_ENABLED | RATE_PROPAGATES, + .recalc = &omap2_propagate_rate, +}; + +static struct clk sleep_ck = { /* sys_clk or 32k */ + .name = "sleep_ck", + .parent = &func_32k_ck, + .rate = 32000, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .recalc = &omap2_propagate_rate, +}; + +static struct clk func_96m_ck = { + .name = "func_96m_ck", + .parent = &apll96_ck, + .rate = 96000000, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_FIXED | RATE_PROPAGATES, + .enable_reg = (void __iomem *)&CM_CLKEN_PLL, + .enable_bit = 0xff, + .recalc = &omap2_propagate_rate, +}; + +static struct clk func_48m_ck = { + .name = "func_48m_ck", + .parent = &apll96_ck, /* 96M or Alt */ + .rate = 48000000, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_FIXED | CM_PLL_SEL1 | RATE_PROPAGATES, + .src_offset = 3, + .enable_reg = (void __iomem *)&CM_CLKEN_PLL, + .enable_bit = 0xff, + .recalc = &omap2_propagate_rate, +}; + +static struct clk func_12m_ck = { + .name = "func_12m_ck", + .parent = &func_48m_ck, + .rate = 12000000, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_FIXED | RATE_PROPAGATES, + .recalc = &omap2_propagate_rate, + .enable_reg = (void __iomem *)&CM_CLKEN_PLL, + .enable_bit = 0xff, +}; + +/* Secure timer, only available in secure mode */ +static struct clk wdt1_osc_ck = { + .name = "ck_wdt1_osc", + .parent = &osc_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk sys_clkout = { + .name = "sys_clkout", + .parent = &func_54m_ck, + .rate = 54000000, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_SYSCLKOUT_SEL1 | RATE_CKCTL, + .src_offset = 0, + .enable_reg = (void __iomem *)&PRCM_CLKOUT_CTRL, + .enable_bit = 7, + .rate_offset = 3, + .recalc = &omap2_clksel_recalc, +}; + +/* In 2430, new in 2420 ES2 */ +static struct clk sys_clkout2 = { + .name = "sys_clkout2", + .parent = &func_54m_ck, + .rate = 54000000, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_SYSCLKOUT_SEL1 | RATE_CKCTL, + .src_offset = 8, + .enable_reg = (void __iomem *)&PRCM_CLKOUT_CTRL, + .enable_bit = 15, + .rate_offset = 11, + .recalc = &omap2_clksel_recalc, +}; + +/* + * MPU clock domain + * Clocks: + * MPU_FCLK, MPU_ICLK + * INT_M_FCLK, INT_M_I_CLK + * + * - Individual clocks are hardware managed. + * - Base divider comes from: CM_CLKSEL_MPU + * + */ +static struct clk mpu_ck = { /* Control cpu */ + .name = "mpu_ck", + .parent = &core_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_CKCTL | + ALWAYS_ENABLED | CM_MPU_SEL1 | DELAYED_APP | + CONFIG_PARTICIPANT | RATE_PROPAGATES, + .rate_offset = 0, /* bits 0-4 */ + .recalc = &omap2_clksel_recalc, +}; + +/* + * DSP (2430-IVA2.1) (2420-UMA+IVA1) clock domain + * Clocks: + * 2430: IVA2.1_FCLK, IVA2.1_ICLK + * 2420: UMA_FCLK, UMA_ICLK, IVA_MPU, IVA_COP + */ +static struct clk iva2_1_fck = { + .name = "iva2_1_fck", + .parent = &core_ck, + .flags = CLOCK_IN_OMAP243X | RATE_CKCTL | CM_DSP_SEL1 | + DELAYED_APP | RATE_PROPAGATES | + CONFIG_PARTICIPANT, + .rate_offset = 0, + .enable_reg = (void __iomem *)&CM_FCLKEN_DSP, + .enable_bit = 0, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk iva2_1_ick = { + .name = "iva2_1_ick", + .parent = &iva2_1_fck, + .flags = CLOCK_IN_OMAP243X | RATE_CKCTL | CM_DSP_SEL1 | + DELAYED_APP | CONFIG_PARTICIPANT, + .rate_offset = 5, + .recalc = &omap2_clksel_recalc, +}; + +/* + * Won't be too specific here. The core clock comes into this block + * it is divided then tee'ed. One branch goes directly to xyz enable + * controls. The other branch gets further divided by 2 then possibly + * routed into a synchronizer and out of clocks abc. + */ +static struct clk dsp_fck = { + .name = "dsp_fck", + .parent = &core_ck, + .flags = CLOCK_IN_OMAP242X | RATE_CKCTL | CM_DSP_SEL1 | + DELAYED_APP | CONFIG_PARTICIPANT | RATE_PROPAGATES, + .rate_offset = 0, + .enable_reg = (void __iomem *)&CM_FCLKEN_DSP, + .enable_bit = 0, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk dsp_ick = { + .name = "dsp_ick", /* apparently ipi and isp */ + .parent = &dsp_fck, + .flags = CLOCK_IN_OMAP242X | RATE_CKCTL | CM_DSP_SEL1 | + DELAYED_APP | CONFIG_PARTICIPANT, + .rate_offset = 5, + .enable_reg = (void __iomem *)&CM_ICLKEN_DSP, + .enable_bit = 1, /* for ipi */ + .recalc = &omap2_clksel_recalc, +}; + +static struct clk iva1_ifck = { + .name = "iva1_ifck", + .parent = &core_ck, + .flags = CLOCK_IN_OMAP242X | CM_DSP_SEL1 | RATE_CKCTL | + CONFIG_PARTICIPANT | RATE_PROPAGATES | DELAYED_APP, + .rate_offset= 8, + .enable_reg = (void __iomem *)&CM_FCLKEN_DSP, + .enable_bit = 10, + .recalc = &omap2_clksel_recalc, +}; + +/* IVA1 mpu/int/i/f clocks are /2 of parent */ +static struct clk iva1_mpu_int_ifck = { + .name = "iva1_mpu_int_ifck", + .parent = &iva1_ifck, + .flags = CLOCK_IN_OMAP242X | RATE_CKCTL | CM_DSP_SEL1, + .enable_reg = (void __iomem *)&CM_FCLKEN_DSP, + .enable_bit = 8, + .recalc = &omap2_clksel_recalc, +}; + +/* + * L3 clock domain + * L3 clocks are used for both interface and functional clocks to + * multiple entities. Some of these clocks are completely managed + * by hardware, and some others allow software control. Hardware + * managed ones general are based on directly CLK_REQ signals and + * various auto idle settings. The functional spec sets many of these + * as 'tie-high' for their enables. + * + * I-CLOCKS: + * L3-Interconnect, SMS, GPMC, SDRC, OCM_RAM, OCM_ROM, SDMA + * CAM, HS-USB. + * F-CLOCK + * SSI. + * + * GPMC memories and SDRC have timing and clock sensitive registers which + * may very well need notification when the clock changes. Currently for low + * operating points, these are taken care of in sleep.S. + */ +static struct clk core_l3_ck = { /* Used for ick and fck, interconnect */ + .name = "core_l3_ck", + .parent = &core_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_CKCTL | ALWAYS_ENABLED | CM_CORE_SEL1 | + DELAYED_APP | CONFIG_PARTICIPANT | + RATE_PROPAGATES, + .rate_offset = 0, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk usb_l4_ick = { /* FS-USB interface clock */ + .name = "usb_l4_ick", + .parent = &core_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP | + CONFIG_PARTICIPANT, + .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, + .enable_bit = 0, + .rate_offset = 25, + .recalc = &omap2_clksel_recalc, +}; + +/* + * SSI is in L3 management domain, its direct parent is core not l3, + * many core power domain entities are grouped into the L3 clock + * domain. + * SSI_SSR_FCLK, SSI_SST_FCLK, SSI_L4_CLIK + * + * ssr = core/1/2/3/4/5, sst = 1/2 ssr. + */ +static struct clk ssi_ssr_sst_fck = { + .name = "ssi_fck", + .parent = &core_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, /* bit 1 */ + .enable_bit = 1, + .rate_offset = 20, + .recalc = &omap2_clksel_recalc, +}; + +/* + * GFX clock domain + * Clocks: + * GFX_FCLK, GFX_ICLK + * GFX_CG1(2d), GFX_CG2(3d) + * + * GFX_FCLK runs from L3, and is divided by (1,2,3,4) + * The 2d and 3d clocks run at a hardware determined + * divided value of fclk. + * + */ +static struct clk gfx_3d_fck = { + .name = "gfx_3d_fck", + .parent = &core_l3_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_CKCTL | CM_GFX_SEL1, + .enable_reg = (void __iomem *)&CM_FCLKEN_GFX, + .enable_bit = 2, + .rate_offset= 0, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gfx_2d_fck = { + .name = "gfx_2d_fck", + .parent = &core_l3_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_CKCTL | CM_GFX_SEL1, + .enable_reg = (void __iomem *)&CM_FCLKEN_GFX, + .enable_bit = 1, + .rate_offset= 0, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gfx_ick = { + .name = "gfx_ick", /* From l3 */ + .parent = &core_l3_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_CKCTL, + .enable_reg = (void __iomem *)&CM_ICLKEN_GFX, /* bit 0 */ + .enable_bit = 0, + .recalc = &omap2_followparent_recalc, +}; + +/* + * Modem clock domain (2430) + * CLOCKS: + * MDM_OSC_CLK + * MDM_ICLK + */ +static struct clk mdm_ick = { /* used both as a ick and fck */ + .name = "mdm_ick", + .parent = &core_ck, + .flags = CLOCK_IN_OMAP243X | RATE_CKCTL | CM_MODEM_SEL1 | + DELAYED_APP | CONFIG_PARTICIPANT, + .rate_offset = 0, + .enable_reg = (void __iomem *)&CM_ICLKEN_MDM, + .enable_bit = 0, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk mdm_osc_ck = { + .name = "mdm_osc_ck", + .rate = 26000000, + .parent = &osc_ck, + .flags = CLOCK_IN_OMAP243X | RATE_FIXED, + .enable_reg = (void __iomem *)&CM_FCLKEN_MDM, + .enable_bit = 1, + .recalc = &omap2_followparent_recalc, +}; + +/* + * L4 clock management domain + * + * This domain contains lots of interface clocks from the L4 interface, some + * functional clocks. Fixed APLL functional source clocks are managed in + * this domain. + */ +static struct clk l4_ck = { /* used both as an ick and fck */ + .name = "l4_ck", + .parent = &core_l3_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_CKCTL | ALWAYS_ENABLED | CM_CORE_SEL1 | + DELAYED_APP | RATE_PROPAGATES, + .rate_offset = 5, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk ssi_l4_ick = { + .name = "ssi_l4_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_CKCTL, + .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, /* bit 1 */ + .enable_bit = 1, + .recalc = &omap2_followparent_recalc, +}; + +/* + * DSS clock domain + * CLOCKs: + * DSS_L4_ICLK, DSS_L3_ICLK, + * DSS_CLK1, DSS_CLK2, DSS_54MHz_CLK + * + * DSS is both initiator and target. + */ +static struct clk dss_ick = { /* Enables both L3,L4 ICLK's */ + .name = "dss_ick", + .parent = &l4_ck, /* really both l3 and l4 */ + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_CKCTL, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 0, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk dss1_fck = { + .name = "dss1_fck", + .parent = &core_ck, /* Core or sys */ + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 0, + .rate_offset = 8, + .src_offset = 8, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk dss2_fck = { /* Alt clk used in power management */ + .name = "dss2_fck", + .parent = &sys_ck, /* fixed at sys_ck or 48MHz */ + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_CKCTL | CM_CORE_SEL1 | RATE_FIXED, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 1, + .src_offset = 13, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk dss_54m_fck = { /* Alt clk used in power management */ + .name = "dss_54m_fck", /* 54m tv clk */ + .parent = &func_54m_ck, + .rate = 54000000, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + RATE_FIXED | RATE_PROPAGATES, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 2, + .recalc = &omap2_propagate_rate, +}; + +/* + * CORE power domain ICLK & FCLK defines. + * Many of the these can have more than one possible parent. Entries + * here will likely have an L4 interface parent, and may have multiple + * functional clock parents. + */ +static struct clk gpt1_ick = { + .name = "gpt1_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP, /* Bit4 */ + .enable_bit = 0, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt1_fck = { + .name = "gpt1_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_WKUP_SEL1, + .enable_reg = (void __iomem *)&CM_FCLKEN_WKUP, + .enable_bit = 0, + .src_offset = 0, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt2_ick = { + .name = "gpt2_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* bit4 */ + .enable_bit = 0, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt2_fck = { + .name = "gpt2_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_CORE_SEL2, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 4, + .src_offset = 2, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt3_ick = { + .name = "gpt3_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* Bit5 */ + .enable_bit = 5, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt3_fck = { + .name = "gpt3_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_CORE_SEL2, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 5, + .src_offset = 4, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt4_ick = { + .name = "gpt4_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* Bit6 */ + .enable_bit = 6, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt4_fck = { + .name = "gpt4_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_CORE_SEL2, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 6, + .src_offset = 6, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt5_ick = { + .name = "gpt5_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* Bit7 */ + .enable_bit = 7, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt5_fck = { + .name = "gpt5_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_CORE_SEL2, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 7, + .src_offset = 8, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt6_ick = { + .name = "gpt6_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_bit = 8, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* bit8 */ + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt6_fck = { + .name = "gpt6_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_CORE_SEL2, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 8, + .src_offset = 10, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt7_ick = { + .name = "gpt7_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* bit9 */ + .enable_bit = 9, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt7_fck = { + .name = "gpt7_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_CORE_SEL2, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 9, + .src_offset = 12, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt8_ick = { + .name = "gpt8_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* bit10 */ + .enable_bit = 10, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt8_fck = { + .name = "gpt8_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_CORE_SEL2, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 10, + .src_offset = 14, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt9_ick = { + .name = "gpt9_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 11, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt9_fck = { + .name = "gpt9_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_CORE_SEL2, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 11, + .src_offset = 16, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt10_ick = { + .name = "gpt10_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 12, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt10_fck = { + .name = "gpt10_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_CORE_SEL2, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 12, + .src_offset = 18, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt11_ick = { + .name = "gpt11_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 13, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt11_fck = { + .name = "gpt11_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_CORE_SEL2, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 13, + .src_offset = 20, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt12_ick = { + .name = "gpt12_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* bit14 */ + .enable_bit = 14, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpt12_fck = { + .name = "gpt12_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + CM_CORE_SEL2, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 14, + .src_offset = 22, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcbsp1_ick = { + .name = "mcbsp1_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_bit = 15, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* bit16 */ + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcbsp1_fck = { + .name = "mcbsp1_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_bit = 15, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcbsp2_ick = { + .name = "mcbsp2_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_bit = 16, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcbsp2_fck = { + .name = "mcbsp2_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_bit = 16, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcbsp3_ick = { + .name = "mcbsp3_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, + .enable_bit = 3, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcbsp3_fck = { + .name = "mcbsp3_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, + .enable_bit = 3, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcbsp4_ick = { + .name = "mcbsp4_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, + .enable_bit = 4, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcbsp4_fck = { + .name = "mcbsp4_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, + .enable_bit = 4, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcbsp5_ick = { + .name = "mcbsp5_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, + .enable_bit = 5, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcbsp5_fck = { + .name = "mcbsp5_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, + .enable_bit = 5, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcspi1_ick = { + .name = "mcspi1_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 17, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcspi1_fck = { + .name = "mcspi1_fck", + .parent = &func_48m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 17, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcspi2_ick = { + .name = "mcspi2_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 18, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcspi2_fck = { + .name = "mcspi2_fck", + .parent = &func_48m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 18, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcspi3_ick = { + .name = "mcspi3_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, + .enable_bit = 9, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mcspi3_fck = { + .name = "mcspi3_fck", + .parent = &func_48m_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, + .enable_bit = 9, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk uart1_ick = { + .name = "uart1_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 21, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk uart1_fck = { + .name = "uart1_fck", + .parent = &func_48m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 21, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk uart2_ick = { + .name = "uart2_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 22, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk uart2_fck = { + .name = "uart2_fck", + .parent = &func_48m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 22, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk uart3_ick = { + .name = "uart3_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, + .enable_bit = 2, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk uart3_fck = { + .name = "uart3_fck", + .parent = &func_48m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, + .enable_bit = 2, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpios_ick = { + .name = "gpios_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP, + .enable_bit = 2, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpios_fck = { + .name = "gpios_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN_WKUP, + .enable_bit = 2, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mpu_wdt_ick = { + .name = "mpu_wdt_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP, + .enable_bit = 3, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mpu_wdt_fck = { + .name = "mpu_wdt_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN_WKUP, + .enable_bit = 3, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk sync_32k_ick = { + .name = "sync_32k_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP, + .enable_bit = 1, + .recalc = &omap2_followparent_recalc, +}; +static struct clk wdt1_ick = { + .name = "wdt1_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP, + .enable_bit = 4, + .recalc = &omap2_followparent_recalc, +}; +static struct clk omapctrl_ick = { + .name = "omapctrl_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP, + .enable_bit = 5, + .recalc = &omap2_followparent_recalc, +}; +static struct clk icr_ick = { + .name = "icr_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP, + .enable_bit = 6, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk cam_ick = { + .name = "cam_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 31, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk cam_fck = { + .name = "cam_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 31, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mailboxes_ick = { + .name = "mailboxes_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 30, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk wdt4_ick = { + .name = "wdt4_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 29, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk wdt4_fck = { + .name = "wdt4_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 29, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk wdt3_ick = { + .name = "wdt3_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 28, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk wdt3_fck = { + .name = "wdt3_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP242X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 28, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mspro_ick = { + .name = "mspro_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 27, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mspro_fck = { + .name = "mspro_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 27, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mmc_ick = { + .name = "mmc_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 26, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mmc_fck = { + .name = "mmc_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP242X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 26, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk fac_ick = { + .name = "fac_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 25, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk fac_fck = { + .name = "fac_fck", + .parent = &func_12m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 25, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk eac_ick = { + .name = "eac_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 24, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk eac_fck = { + .name = "eac_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP242X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 24, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk hdq_ick = { + .name = "hdq_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 23, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk hdq_fck = { + .name = "hdq_fck", + .parent = &func_12m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 23, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk i2c2_ick = { + .name = "i2c2_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 20, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk i2c2_fck = { + .name = "i2c2_fck", + .parent = &func_12m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 20, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk i2chs2_fck = { + .name = "i2chs2_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, + .enable_bit = 20, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk i2c1_ick = { + .name = "i2c1_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 19, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk i2c1_fck = { + .name = "i2c1_fck", + .parent = &func_12m_ck, + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 19, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk i2chs1_fck = { + .name = "i2chs1_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, + .enable_bit = 19, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk vlynq_ick = { + .name = "vlynq_ick", + .parent = &core_l3_ck, + .flags = CLOCK_IN_OMAP242X, + .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, + .enable_bit = 3, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk vlynq_fck = { + .name = "vlynq_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP242X | RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP, + .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, + .enable_bit = 3, + .src_offset = 15, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk sdrc_ick = { + .name = "sdrc_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN3_CORE, + .enable_bit = 2, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk des_ick = { + .name = "des_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, + .enable_reg = (void __iomem *)&CM_ICLKEN4_CORE, + .enable_bit = 0, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk sha_ick = { + .name = "sha_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, + .enable_reg = (void __iomem *)&CM_ICLKEN4_CORE, + .enable_bit = 1, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk rng_ick = { + .name = "rng_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, + .enable_reg = (void __iomem *)&CM_ICLKEN4_CORE, + .enable_bit = 2, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk aes_ick = { + .name = "aes_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, + .enable_reg = (void __iomem *)&CM_ICLKEN4_CORE, + .enable_bit = 3, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk pka_ick = { + .name = "pka_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, + .enable_reg = (void __iomem *)&CM_ICLKEN4_CORE, + .enable_bit = 4, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk usb_fck = { + .name = "usb_fck", + .parent = &func_48m_ck, + .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, + .enable_bit = 0, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk usbhs_ick = { + .name = "usbhs_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, + .enable_bit = 6, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mmchs1_ick = { + .name = "mmchs1_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, + .enable_bit = 7, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mmchs1_fck = { + .name = "mmchs1_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, + .enable_bit = 7, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mmchs2_ick = { + .name = "mmchs2_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, + .enable_bit = 8, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mmchs2_fck = { + .name = "mmchs2_fck", + .parent = &func_96m_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, + .enable_bit = 8, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpio5_ick = { + .name = "gpio5_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, + .enable_bit = 10, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk gpio5_fck = { + .name = "gpio5_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, + .enable_bit = 10, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mdm_intc_ick = { + .name = "mdm_intc_ick", + .parent = &l4_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, + .enable_bit = 11, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mmchsdb1_fck = { + .name = "mmchsdb1_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, + .enable_bit = 16, + .recalc = &omap2_followparent_recalc, +}; + +static struct clk mmchsdb2_fck = { + .name = "mmchsdb2_fck", + .parent = &func_32k_ck, + .flags = CLOCK_IN_OMAP243X, + .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, + .enable_bit = 17, + .recalc = &omap2_followparent_recalc, +}; + +/* + * This clock is a composite clock which does entire set changes then + * forces a rebalance. It keys on the MPU speed, but it really could + * be any key speed part of a set in the rate table. + * + * to really change a set, you need memory table sets which get changed + * in sram, pre-notifiers & post notifiers, changing the top set, without + * having low level display recalc's won't work... this is why dpm notifiers + * work, isr's off, walk a list of clocks already _off_ and not messing with + * the bus. + * + * This clock should have no parent. It embodies the entire upper level + * active set. A parent will mess up some of the init also. + */ +static struct clk virt_prcm_set = { + .name = "virt_prcm_set", + .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | + VIRTUAL_CLOCK | ALWAYS_ENABLED | DELAYED_APP, + .parent = &mpu_ck, /* Indexed by mpu speed, no parent */ + .recalc = &omap2_mpu_recalc, /* sets are keyed on mpu rate */ + .set_rate = &omap2_select_table_rate, + .round_rate = &omap2_round_to_table_rate, +}; + +static struct clk *onchip_clks[] = { + /* external root sources */ + &func_32k_ck, + &osc_ck, + &sys_ck, + &alt_ck, + /* internal analog sources */ + &dpll_ck, + &apll96_ck, + &apll54_ck, + /* internal prcm root sources */ + &func_54m_ck, + &core_ck, + &sleep_ck, + &func_96m_ck, + &func_48m_ck, + &func_12m_ck, + &wdt1_osc_ck, + &sys_clkout, + &sys_clkout2, + /* mpu domain clocks */ + &mpu_ck, + /* dsp domain clocks */ + &iva2_1_fck, /* 2430 */ + &iva2_1_ick, + &dsp_ick, /* 2420 */ + &dsp_fck, + &iva1_ifck, + &iva1_mpu_int_ifck, + /* GFX domain clocks */ + &gfx_3d_fck, + &gfx_2d_fck, + &gfx_ick, + /* Modem domain clocks */ + &mdm_ick, + &mdm_osc_ck, + /* DSS domain clocks */ + &dss_ick, + &dss1_fck, + &dss2_fck, + &dss_54m_fck, + /* L3 domain clocks */ + &core_l3_ck, + &ssi_ssr_sst_fck, + &usb_l4_ick, + /* L4 domain clocks */ + &l4_ck, /* used as both core_l4 and wu_l4 */ + &ssi_l4_ick, + /* virtual meta-group clock */ + &virt_prcm_set, + /* general l4 interface ck, multi-parent functional clk */ + &gpt1_ick, + &gpt1_fck, + &gpt2_ick, + &gpt2_fck, + &gpt3_ick, + &gpt3_fck, + &gpt4_ick, + &gpt4_fck, + &gpt5_ick, + &gpt5_fck, + &gpt6_ick, + &gpt6_fck, + &gpt7_ick, + &gpt7_fck, + &gpt8_ick, + &gpt8_fck, + &gpt9_ick, + &gpt9_fck, + &gpt10_ick, + &gpt10_fck, + &gpt11_ick, + &gpt11_fck, + &gpt12_ick, + &gpt12_fck, + &mcbsp1_ick, + &mcbsp1_fck, + &mcbsp2_ick, + &mcbsp2_fck, + &mcbsp3_ick, + &mcbsp3_fck, + &mcbsp4_ick, + &mcbsp4_fck, + &mcbsp5_ick, + &mcbsp5_fck, + &mcspi1_ick, + &mcspi1_fck, + &mcspi2_ick, + &mcspi2_fck, + &mcspi3_ick, + &mcspi3_fck, + &uart1_ick, + &uart1_fck, + &uart2_ick, + &uart2_fck, + &uart3_ick, + &uart3_fck, + &gpios_ick, + &gpios_fck, + &mpu_wdt_ick, + &mpu_wdt_fck, + &sync_32k_ick, + &wdt1_ick, + &omapctrl_ick, + &icr_ick, + &cam_fck, + &cam_ick, + &mailboxes_ick, + &wdt4_ick, + &wdt4_fck, + &wdt3_ick, + &wdt3_fck, + &mspro_ick, + &mspro_fck, + &mmc_ick, + &mmc_fck, + &fac_ick, + &fac_fck, + &eac_ick, + &eac_fck, + &hdq_ick, + &hdq_fck, + &i2c1_ick, + &i2c1_fck, + &i2chs1_fck, + &i2c2_ick, + &i2c2_fck, + &i2chs2_fck, + &vlynq_ick, + &vlynq_fck, + &sdrc_ick, + &des_ick, + &sha_ick, + &rng_ick, + &aes_ick, + &pka_ick, + &usb_fck, + &usbhs_ick, + &mmchs1_ick, + &mmchs1_fck, + &mmchs2_ick, + &mmchs2_fck, + &gpio5_ick, + &gpio5_fck, + &mdm_intc_ick, + &mmchsdb1_fck, + &mmchsdb2_fck, +}; + +#endif -- cgit v1.2.2 From b1faebb672edecf48d4745fb05eeca3c704b6823 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 10 Nov 2005 14:26:54 +0000 Subject: [ARM] 3144/1: OMAP 5/5: Update omap H2 defconfig Patch from Tony Lindgren This patch updates omap H2 defconfig. Signed-off-by: Tony Lindgren Signed-off-by: Russell King --- arch/arm/configs/omap_h2_1610_defconfig | 97 ++++++++++++++++++++++----------- 1 file changed, 66 insertions(+), 31 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig index 4198677cd394..529f0f72e1e9 100644 --- a/arch/arm/configs/omap_h2_1610_defconfig +++ b/arch/arm/configs/omap_h2_1610_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13 -# Mon Sep 5 18:07:12 2005 +# Linux kernel version: 2.6.14 +# Wed Nov 9 18:53:40 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -22,6 +22,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set @@ -31,6 +32,7 @@ CONFIG_SYSCTL=y # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -59,6 +61,23 @@ CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_KMOD is not set +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # System Type # @@ -81,6 +100,7 @@ CONFIG_OBSOLETE_MODPARM=y # CONFIG_ARCH_LH7A40X is not set CONFIG_ARCH_OMAP=y # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_AAEC2000 is not set @@ -112,7 +132,7 @@ CONFIG_OMAP_SERIAL_WAKE=y # OMAP Core Type # # CONFIG_ARCH_OMAP730 is not set -# CONFIG_ARCH_OMAP1510 is not set +# CONFIG_ARCH_OMAP15XX is not set CONFIG_ARCH_OMAP16XX=y # @@ -177,6 +197,8 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_LEDS is not set CONFIG_ALIGNMENT_TRAP=y @@ -258,13 +280,18 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_NETFILTER is not set +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + # # SCTP Configuration (EXPERIMENTAL) # @@ -281,6 +308,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -291,6 +322,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -328,21 +360,13 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -369,10 +393,12 @@ CONFIG_SCSI_PROC_FS=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DEBUG is not set @@ -403,6 +429,11 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# +# PHY device support +# +# CONFIG_PHYLIB is not set + # # Ethernet (10 or 100Mbit) # @@ -439,6 +470,7 @@ CONFIG_PPP=y # CONFIG_PPP_SYNC_TTY is not set # CONFIG_PPP_DEFLATE is not set # CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set # CONFIG_PPPOE is not set CONFIG_SLIP=y CONFIG_SLIP_COMPRESSED=y @@ -541,24 +573,28 @@ CONFIG_WATCHDOG_NOWAYOUT=y # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support # # CONFIG_I2C is not set -# CONFIG_I2C_SENSOR is not set -CONFIG_ISP1301_OMAP=y # # Hardware Monitoring support # CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set # CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices # +# +# Multimedia Capabilities Port drivers +# + # # Multimedia devices # @@ -576,7 +612,6 @@ CONFIG_FB=y # CONFIG_FB_CFB_FILLRECT is not set # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set -# CONFIG_FB_SOFT_CURSOR is not set # CONFIG_FB_MACMODES is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set @@ -589,6 +624,7 @@ CONFIG_FB_MODE_HELPERS=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -600,6 +636,7 @@ CONFIG_FONT_8x16=y # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set +# CONFIG_FONT_RL is not set # # Logo configuration @@ -624,10 +661,10 @@ CONFIG_SOUND=y # Open Sound System # CONFIG_SOUND_PRIME=y +# CONFIG_OBSOLETE_OSS_DRIVER is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set # CONFIG_SOUND_OSS is not set -# CONFIG_SOUND_AD1980 is not set # # USB support @@ -636,23 +673,22 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # -CONFIG_USB_GADGET=y -# CONFIG_USB_GADGET_DEBUG_FILES is not set -CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET is not set # CONFIG_USB_GADGET_NET2280 is not set # CONFIG_USB_GADGET_PXA2XX is not set # CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LH7A40X is not set -CONFIG_USB_GADGET_OMAP=y -CONFIG_USB_OMAP=y +# CONFIG_USB_GADGET_OMAP is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set -# CONFIG_USB_GADGET_DUALSPEED is not set # CONFIG_USB_ZERO is not set -CONFIG_USB_ETH=y -CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_ETH is not set # CONFIG_USB_GADGETFS is not set # CONFIG_USB_FILE_STORAGE is not set # CONFIG_USB_G_SERIAL is not set @@ -673,10 +709,6 @@ CONFIG_EXT2_FS=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set - -# -# XFS support -# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=y @@ -685,6 +717,7 @@ CONFIG_INOTIFY=y CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -706,10 +739,10 @@ CONFIG_FAT_DEFAULT_CODEPAGE=437 # CONFIG_PROC_FS=y CONFIG_SYSFS=y -# CONFIG_DEVPTS_FS_XATTR is not set # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -750,6 +783,7 @@ CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -859,6 +893,7 @@ CONFIG_CRYPTO_DES=y # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -- cgit v1.2.2 From 078abcf95cdb95c78d786dbc61ae3c22ee70fb61 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Thu, 10 Nov 2005 17:42:29 +0000 Subject: [ARM] 3096/1: Add SharpSL Zaurus power and battery management core driver Patch from Richard Purdie This patch adds a power and battery management core driver which with the addition of the right device files, supports the c7x0 and cxx00 series of Sharp Zaurus handhelds. The driver is complex for several reasons. Battery charging is manually monitored and controlled. When suspended, the device needs to periodically partially resume, check the charging status and then re-suspend. It does without bothering the higher linux layers as a full resume and re-suspend is unnecessary. The code is carefully written to avoid interrupts or calling code outside the module under these circumstances. It also vets the various wake up sources and monitors the device's power situation. Hooks to limit the backlight intensity and to notify the battery monitoring code of backlight events are connected/added as the backlight is one of the biggest users of power on the device. Signed-off-by: Richard Purdie Signed-off-by: Russell King --- arch/arm/mach-pxa/sharpsl.h | 87 ++++ arch/arm/mach-pxa/sharpsl_pm.c | 992 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 1079 insertions(+) create mode 100644 arch/arm/mach-pxa/sharpsl_pm.c (limited to 'arch') diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h index 3977a77aacdd..4879c0f7da72 100644 --- a/arch/arm/mach-pxa/sharpsl.h +++ b/arch/arm/mach-pxa/sharpsl.h @@ -32,3 +32,90 @@ void corgi_put_hsync(void); void spitz_put_hsync(void); void corgi_wait_hsync(void); void spitz_wait_hsync(void); + +/* + * SharpSL Battery/PM Driver + */ + +struct sharpsl_charger_machinfo { + void (*init)(void); + int gpio_acin; + int gpio_batfull; + int gpio_batlock; + int gpio_fatal; + int (*status_acin)(void); + void (*discharge)(int); + void (*discharge1)(int); + void (*charge)(int); + void (*chargeled)(int); + void (*measure_temp)(int); + void (*presuspend)(void); + void (*postsuspend)(void); + unsigned long (*charger_wakeup)(void); + int (*should_wakeup)(unsigned int resume_on_alarm); + int bat_levels; + struct battery_thresh *bat_levels_noac; + struct battery_thresh *bat_levels_acin; + int status_high_acin; + int status_low_acin; + int status_high_noac; + int status_low_noac; +}; + +struct battery_thresh { + int voltage; + int percentage; +}; + +struct battery_stat { + int ac_status; /* APM AC Present/Not Present */ + int mainbat_status; /* APM Main Battery Status */ + int mainbat_percent; /* Main Battery Percentage Charge */ + int mainbat_voltage; /* Main Battery Voltage */ +}; + +struct sharpsl_pm_status { + struct device *dev; + struct timer_list ac_timer; + struct timer_list chrg_full_timer; + + int charge_mode; +#define CHRG_ERROR (-1) +#define CHRG_OFF (0) +#define CHRG_ON (1) +#define CHRG_DONE (2) + + unsigned int flags; +#define SHARPSL_SUSPENDED (1 << 0) /* Device is Suspended */ +#define SHARPSL_ALARM_ACTIVE (1 << 1) /* Alarm is for charging event (not user) */ +#define SHARPSL_BL_LIMIT (1 << 2) /* Backlight Intensity Limited */ +#define SHARPSL_APM_QUEUED (1 << 3) /* APM Event Queued */ +#define SHARPSL_DO_OFFLINE_CHRG (1 << 4) /* Trigger the offline charger */ + + int full_count; + unsigned long charge_start_time; + struct sharpsl_charger_machinfo *machinfo; + struct battery_stat battstat; +}; + +extern struct sharpsl_pm_status sharpsl_pm; +extern struct battery_thresh spitz_battery_levels_acin[]; +extern struct battery_thresh spitz_battery_levels_noac[]; + +#define READ_GPIO_BIT(x) (GPLR(x) & GPIO_bit(x)) + +#define SHARPSL_LED_ERROR 2 +#define SHARPSL_LED_ON 1 +#define SHARPSL_LED_OFF 0 + +#define CHARGE_ON() sharpsl_pm.machinfo->charge(1) +#define CHARGE_OFF() sharpsl_pm.machinfo->charge(0) +#define CHARGE_LED_ON() sharpsl_pm.machinfo->chargeled(SHARPSL_LED_ON) +#define CHARGE_LED_OFF() sharpsl_pm.machinfo->chargeled(SHARPSL_LED_OFF) +#define CHARGE_LED_ERR() sharpsl_pm.machinfo->chargeled(SHARPSL_LED_ERROR) +#define DISCHARGE_ON() sharpsl_pm.machinfo->discharge(1) +#define DISCHARGE_OFF() sharpsl_pm.machinfo->discharge(0) +#define STATUS_AC_IN sharpsl_pm.machinfo->status_acin() +#define STATUS_BATT_LOCKED READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock) +#define STATUS_CHRG_FULL READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull) +#define STATUS_FATAL READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal) diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c new file mode 100644 index 000000000000..6c9e871c53d8 --- /dev/null +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -0,0 +1,992 @@ +/* + * Battery and Power Management code for the Sharp SL-C7xx and SL-Cxx00 + * series of PDAs + * + * Copyright (c) 2004-2005 Richard Purdie + * + * Based on code written by Sharp for 2.4 kernels + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#undef DEBUG + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include +#include +#include "sharpsl.h" + +/* + * Constants + */ +#define SHARPSL_CHARGE_ON_TIME_INTERVAL (msecs_to_jiffies(1*60*1000)) /* 1 min */ +#define SHARPSL_CHARGE_FINISH_TIME (msecs_to_jiffies(10*60*1000)) /* 10 min */ +#define SHARPSL_BATCHK_TIME (msecs_to_jiffies(15*1000)) /* 15 sec */ +#define SHARPSL_BATCHK_TIME_SUSPEND (60*10) /* 10 min */ +#define SHARPSL_WAIT_CO_TIME 15 /* 15 sec */ +#define SHARPSL_WAIT_DISCHARGE_ON 100 /* 100 msec */ +#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP 10 /* 10 msec */ +#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT 10 /* 10 msec */ +#define SHARPSL_CHECK_BATTERY_WAIT_TIME_JKVAD 10 /* 10 msec */ +#define SHARPSL_CHARGE_WAIT_TIME 15 /* 15 msec */ +#define SHARPSL_CHARGE_CO_CHECK_TIME 5 /* 5 msec */ +#define SHARPSL_CHARGE_RETRY_CNT 1 /* eqv. 10 min */ + +#define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */ +#define SHARPSL_CHARGE_ON_TEMP 0xe0 /* 2.9V */ +#define SHARPSL_CHARGE_ON_JKVAD_HIGH 0x9b /* 6V */ +#define SHARPSL_CHARGE_ON_JKVAD_LOW 0x34 /* 2V */ +#define SHARPSL_FATAL_ACIN_VOLT 182 /* 3.45V */ +#define SHARPSL_FATAL_NOACIN_VOLT 170 /* 3.40V */ + +struct battery_thresh spitz_battery_levels_acin[] = { + { 213, 100}, + { 212, 98}, + { 211, 95}, + { 210, 93}, + { 209, 90}, + { 208, 88}, + { 207, 85}, + { 206, 83}, + { 205, 80}, + { 204, 78}, + { 203, 75}, + { 202, 73}, + { 201, 70}, + { 200, 68}, + { 199, 65}, + { 198, 63}, + { 197, 60}, + { 196, 58}, + { 195, 55}, + { 194, 53}, + { 193, 50}, + { 192, 48}, + { 192, 45}, + { 191, 43}, + { 191, 40}, + { 190, 38}, + { 190, 35}, + { 189, 33}, + { 188, 30}, + { 187, 28}, + { 186, 25}, + { 185, 23}, + { 184, 20}, + { 183, 18}, + { 182, 15}, + { 181, 13}, + { 180, 10}, + { 179, 8}, + { 178, 5}, + { 0, 0}, +}; + +struct battery_thresh spitz_battery_levels_noac[] = { + { 213, 100}, + { 212, 98}, + { 211, 95}, + { 210, 93}, + { 209, 90}, + { 208, 88}, + { 207, 85}, + { 206, 83}, + { 205, 80}, + { 204, 78}, + { 203, 75}, + { 202, 73}, + { 201, 70}, + { 200, 68}, + { 199, 65}, + { 198, 63}, + { 197, 60}, + { 196, 58}, + { 195, 55}, + { 194, 53}, + { 193, 50}, + { 192, 48}, + { 191, 45}, + { 190, 43}, + { 189, 40}, + { 188, 38}, + { 187, 35}, + { 186, 33}, + { 185, 30}, + { 184, 28}, + { 183, 25}, + { 182, 23}, + { 181, 20}, + { 180, 18}, + { 179, 15}, + { 178, 13}, + { 177, 10}, + { 176, 8}, + { 175, 5}, + { 0, 0}, +}; + +/* MAX1111 Commands */ +#define MAXCTRL_PD0 1u << 0 +#define MAXCTRL_PD1 1u << 1 +#define MAXCTRL_SGL 1u << 2 +#define MAXCTRL_UNI 1u << 3 +#define MAXCTRL_SEL_SH 4 +#define MAXCTRL_STR 1u << 7 + +/* MAX1111 Channel Definitions */ +#define BATT_AD 4u +#define BATT_THM 2u +#define JK_VAD 6u + + +/* + * Prototypes + */ +static int sharpsl_read_MainBattery(void); +static int sharpsl_off_charge_battery(void); +static int sharpsl_check_battery(int mode); +static int sharpsl_ac_check(void); +static int sharpsl_fatal_check(void); +static int sharpsl_average_value(int ad); +static void sharpsl_average_clear(void); +static void sharpsl_charge_toggle(void *private_); +static void sharpsl_battery_thread(void *private_); + + +/* + * Variables + */ +struct sharpsl_pm_status sharpsl_pm; +DECLARE_WORK(toggle_charger, sharpsl_charge_toggle, NULL); +DECLARE_WORK(sharpsl_bat, sharpsl_battery_thread, NULL); + + +static int get_percentage(int voltage) +{ + int i = sharpsl_pm.machinfo->bat_levels - 1; + struct battery_thresh *thresh; + + if (sharpsl_pm.charge_mode == CHRG_ON) + thresh=sharpsl_pm.machinfo->bat_levels_acin; + else + thresh=sharpsl_pm.machinfo->bat_levels_noac; + + while (i > 0 && (voltage > thresh[i].voltage)) + i--; + + return thresh[i].percentage; +} + +static int get_apm_status(int voltage) +{ + int low_thresh, high_thresh; + + if (sharpsl_pm.charge_mode == CHRG_ON) { + high_thresh = sharpsl_pm.machinfo->status_high_acin; + low_thresh = sharpsl_pm.machinfo->status_low_acin; + } else { + high_thresh = sharpsl_pm.machinfo->status_high_noac; + low_thresh = sharpsl_pm.machinfo->status_low_noac; + } + + if (voltage >= high_thresh) + return APM_BATTERY_STATUS_HIGH; + if (voltage >= low_thresh) + return APM_BATTERY_STATUS_LOW; + return APM_BATTERY_STATUS_CRITICAL; +} + +void sharpsl_battery_kick(void) +{ + schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125)); +} +EXPORT_SYMBOL(sharpsl_battery_kick); + + +static void sharpsl_battery_thread(void *private_) +{ + int voltage, percent, apm_status, i = 0; + + if (!sharpsl_pm.machinfo) + return; + + sharpsl_pm.battstat.ac_status = (!(STATUS_AC_IN) ? APM_AC_OFFLINE : APM_AC_ONLINE); + + /* Corgi cannot confirm when battery fully charged so periodically kick! */ + if (machine_is_corgi() && (sharpsl_pm.charge_mode == CHRG_ON) + && time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_ON_TIME_INTERVAL)) + schedule_work(&toggle_charger); + + while(1) { + voltage = sharpsl_read_MainBattery(); + if (voltage > 0) break; + if (i++ > 5) { + voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage; + dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n"); + break; + } + } + + voltage = sharpsl_average_value(voltage); + apm_status = get_apm_status(voltage); + percent = get_percentage(voltage); + + /* At low battery voltages, the voltage has a tendency to start + creeping back up so we try to avoid this here */ + if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) || percent <= sharpsl_pm.battstat.mainbat_percent) { + sharpsl_pm.battstat.mainbat_voltage = voltage; + sharpsl_pm.battstat.mainbat_status = apm_status; + sharpsl_pm.battstat.mainbat_percent = percent; + } + + dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %d\n", voltage, + sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies); + + /* If battery is low. limit backlight intensity to save power. */ + if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE) + && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) || + (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) { + if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) { + corgibl_limit_intensity(1); + sharpsl_pm.flags |= SHARPSL_BL_LIMIT; + } + } else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) { + corgibl_limit_intensity(0); + sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT; + } + + /* Suspend if critical battery level */ + if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE) + && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL) + && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) { + sharpsl_pm.flags |= SHARPSL_APM_QUEUED; + dev_err(sharpsl_pm.dev, "Fatal Off\n"); + apm_queue_event(APM_CRITICAL_SUSPEND); + } + + schedule_delayed_work(&sharpsl_bat, SHARPSL_BATCHK_TIME); +} + +static void sharpsl_charge_on(void) +{ + dev_dbg(sharpsl_pm.dev, "Turning Charger On\n"); + + sharpsl_pm.full_count = 0; + sharpsl_pm.charge_mode = CHRG_ON; + schedule_delayed_work(&toggle_charger, msecs_to_jiffies(250)); + schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(500)); +} + +static void sharpsl_charge_off(void) +{ + dev_dbg(sharpsl_pm.dev, "Turning Charger Off\n"); + + CHARGE_OFF(); + CHARGE_LED_OFF(); + sharpsl_pm.charge_mode = CHRG_OFF; + + schedule_work(&sharpsl_bat); +} + +static void sharpsl_charge_error(void) +{ + CHARGE_LED_ERR(); + CHARGE_OFF(); + sharpsl_pm.charge_mode = CHRG_ERROR; +} + +static void sharpsl_charge_toggle(void *private_) +{ + dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies); + + if (STATUS_AC_IN == 0) { + sharpsl_charge_off(); + return; + } else if ((sharpsl_check_battery(1) < 0) || (sharpsl_ac_check() < 0)) { + sharpsl_charge_error(); + return; + } + + CHARGE_LED_ON(); + CHARGE_OFF(); + mdelay(SHARPSL_CHARGE_WAIT_TIME); + CHARGE_ON(); + + sharpsl_pm.charge_start_time = jiffies; +} + +static void sharpsl_ac_timer(unsigned long data) +{ + int acin = STATUS_AC_IN; + + dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin); + + sharpsl_average_clear(); + if (acin && (sharpsl_pm.charge_mode != CHRG_ON)) + sharpsl_charge_on(); + else if (sharpsl_pm.charge_mode == CHRG_ON) + sharpsl_charge_off(); + + schedule_work(&sharpsl_bat); +} + + +static irqreturn_t sharpsl_ac_isr(int irq, void *dev_id, struct pt_regs *fp) +{ + /* Delay the event slightly to debounce */ + /* Must be a smaller delay than the chrg_full_isr below */ + mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250)); + + return IRQ_HANDLED; +} + +static void sharpsl_chrg_full_timer(unsigned long data) +{ + dev_dbg(sharpsl_pm.dev, "Charge Full at time: %lx\n", jiffies); + + sharpsl_pm.full_count++; + + if (STATUS_AC_IN == 0) { + dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n"); + if (sharpsl_pm.charge_mode == CHRG_ON) + sharpsl_charge_off(); + } else if (sharpsl_pm.full_count < 2) { + dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n"); + schedule_work(&toggle_charger); + } else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) { + dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n"); + schedule_work(&toggle_charger); + } else { + sharpsl_charge_off(); + sharpsl_pm.charge_mode = CHRG_DONE; + dev_dbg(sharpsl_pm.dev, "Charge Full: Charging Finished\n"); + } +} + +/* Charging Finished Interrupt (Not present on Corgi) */ +/* Can trigger at the same time as an AC staus change so + delay until after that has been processed */ +static irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id, struct pt_regs *fp) +{ + if (sharpsl_pm.flags & SHARPSL_SUSPENDED) + return IRQ_HANDLED; + + /* delay until after any ac interrupt */ + mod_timer(&sharpsl_pm.chrg_full_timer, jiffies + msecs_to_jiffies(500)); + + return IRQ_HANDLED; +} + +static irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id, struct pt_regs *fp) +{ + int is_fatal = 0; + + if (STATUS_BATT_LOCKED == 0) { + dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n"); + is_fatal = 1; + } + + if (sharpsl_pm.machinfo->gpio_fatal && (STATUS_FATAL == 0)) { + dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n"); + is_fatal = 1; + } + + if (!(sharpsl_pm.flags & SHARPSL_APM_QUEUED) && is_fatal) { + sharpsl_pm.flags |= SHARPSL_APM_QUEUED; + apm_queue_event(APM_CRITICAL_SUSPEND); + } + + return IRQ_HANDLED; +} + +/* + * Maintain an average of the last 10 readings + */ +#define SHARPSL_CNV_VALUE_NUM 10 +static int sharpsl_ad_index; + +static void sharpsl_average_clear(void) +{ + sharpsl_ad_index = 0; +} + +static int sharpsl_average_value(int ad) +{ + int i, ad_val = 0; + static int sharpsl_ad[SHARPSL_CNV_VALUE_NUM+1]; + + if (sharpsl_pm.battstat.mainbat_status != APM_BATTERY_STATUS_HIGH) { + sharpsl_ad_index = 0; + return ad; + } + + sharpsl_ad[sharpsl_ad_index] = ad; + sharpsl_ad_index++; + if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) { + for (i=0; i < (SHARPSL_CNV_VALUE_NUM-1); i++) + sharpsl_ad[i] = sharpsl_ad[i+1]; + sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1; + } + for (i=0; i < sharpsl_ad_index; i++) + ad_val += sharpsl_ad[i]; + + return (ad_val / sharpsl_ad_index); +} + + +/* + * Read MAX1111 ADC + */ +static int read_max1111(int channel) +{ + return corgi_ssp_max1111_get((channel << MAXCTRL_SEL_SH) | MAXCTRL_PD0 | MAXCTRL_PD1 + | MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR); +} + +static int sharpsl_read_MainBattery(void) +{ + return read_max1111(BATT_AD); +} + +static int sharpsl_read_Temp(void) +{ + int temp; + + sharpsl_pm.machinfo->measure_temp(1); + + mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP); + temp = read_max1111(BATT_THM); + + sharpsl_pm.machinfo->measure_temp(0); + + return temp; +} + +static int sharpsl_read_jkvad(void) +{ + return read_max1111(JK_VAD); +} + +/* + * Take an array of 5 integers, remove the maximum and minimum values + * and return the average. + */ +static int get_select_val(int *val) +{ + int i, j, k, temp, sum = 0; + + /* Find MAX val */ + temp = val[0]; + j=0; + for (i=1; i<5; i++) { + if (temp < val[i]) { + temp = val[i]; + j = i; + } + } + + /* Find MIN val */ + temp = val[4]; + k=4; + for (i=3; i>=0; i--) { + if (temp > val[i]) { + temp = val[i]; + k = i; + } + } + + for (i=0; i<5; i++) + if (i != j && i != k ) + sum += val[i]; + + dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]); + + return (sum/3); +} + +/* mode 0 - Check temperature and voltage + * 1 - Check temperature only */ +static int sharpsl_check_battery(int mode) +{ + int val, i, buff[5]; + + /* Check battery temperature */ + for (i=0; i<5; i++) { + mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP); + buff[i] = sharpsl_read_Temp(); + } + + val = get_select_val(buff); + + dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val); + if (val > SHARPSL_CHARGE_ON_TEMP) + return -1; + if (mode == 1) + return 0; + + /* disable charge, enable discharge */ + CHARGE_OFF(); + DISCHARGE_ON(); + mdelay(SHARPSL_WAIT_DISCHARGE_ON); + + if (sharpsl_pm.machinfo->discharge1) + sharpsl_pm.machinfo->discharge1(1); + + /* Check battery voltage */ + for (i=0; i<5; i++) { + buff[i] = sharpsl_read_MainBattery(); + mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT); + } + + if (sharpsl_pm.machinfo->discharge1) + sharpsl_pm.machinfo->discharge1(0); + + DISCHARGE_OFF(); + + val = get_select_val(buff); + dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val); + + if (val < SHARPSL_CHARGE_ON_VOLT) + return -1; + + return 0; +} + +static int sharpsl_ac_check(void) +{ + int temp, i, buff[5]; + + for (i=0; i<5; i++) { + buff[i] = sharpsl_read_jkvad(); + mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_JKVAD); + } + + temp = get_select_val(buff); + dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp); + + if ((temp > SHARPSL_CHARGE_ON_JKVAD_HIGH) || (temp < SHARPSL_CHARGE_ON_JKVAD_LOW)) { + dev_err(sharpsl_pm.dev, "Error: AC check failed.\n"); + return -1; + } + + return 0; +} + +#ifdef CONFIG_PM +static int sharpsl_pm_suspend(struct device *dev, pm_message_t state) +{ + sharpsl_pm.flags |= SHARPSL_SUSPENDED; + flush_scheduled_work(); + + if (sharpsl_pm.charge_mode == CHRG_ON) + sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG; + else + sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG; + + return 0; +} + +static int sharpsl_pm_resume(struct device *dev) +{ + /* Clear the reset source indicators as they break the bootloader upon reboot */ + RCSR = 0x0f; + sharpsl_average_clear(); + sharpsl_pm.flags &= ~SHARPSL_APM_QUEUED; + sharpsl_pm.flags &= ~SHARPSL_SUSPENDED; + + return 0; +} + +static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state) +{ + dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR); + + dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG); + /* not charging and AC-IN! */ + + if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (STATUS_AC_IN != 0)) { + dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n"); + sharpsl_pm.charge_mode = CHRG_OFF; + sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG; + sharpsl_off_charge_battery(); + } + + sharpsl_pm.machinfo->presuspend(); + + PEDR = 0xffffffff; /* clear it */ + + sharpsl_pm.flags &= ~SHARPSL_ALARM_ACTIVE; + if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) { + RTSR &= RTSR_ALE; + RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND; + dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR); + sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE; + } else if (alarm_enable) { + RTSR &= RTSR_ALE; + RTAR = alarm_time; + dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR); + } else { + dev_dbg(sharpsl_pm.dev, "No alarms set.\n"); + } + + pxa_pm_enter(state); + + sharpsl_pm.machinfo->postsuspend(); + + dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR); +} + +static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state) +{ + if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable) ) + { + if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) { + dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n"); + corgi_goto_sleep(alarm_time, alarm_enable, state); + return 1; + } + if(sharpsl_off_charge_battery()) { + dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n"); + corgi_goto_sleep(alarm_time, alarm_enable, state); + return 1; + } + dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n"); + } + + if ((STATUS_BATT_LOCKED == 0) || (sharpsl_fatal_check() < 0) ) + { + dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n"); + corgi_goto_sleep(alarm_time, alarm_enable, state); + return 1; + } + + return 0; +} + +static int corgi_pxa_pm_enter(suspend_state_t state) +{ + unsigned long alarm_time = RTAR; + unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0); + + dev_dbg(sharpsl_pm.dev, "SharpSL suspending for first time.\n"); + + corgi_goto_sleep(alarm_time, alarm_status, state); + + while (corgi_enter_suspend(alarm_time,alarm_status,state)) + {} + + dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n"); + + return 0; +} +#endif + + +/* + * Check for fatal battery errors + * Fatal returns -1 + */ +static int sharpsl_fatal_check(void) +{ + int buff[5], temp, i, acin; + + dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n"); + + /* Check AC-Adapter */ + acin = STATUS_AC_IN; + + if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) { + CHARGE_OFF(); + udelay(100); + DISCHARGE_ON(); /* enable discharge */ + mdelay(SHARPSL_WAIT_DISCHARGE_ON); + } + + if (sharpsl_pm.machinfo->discharge1) + sharpsl_pm.machinfo->discharge1(1); + + /* Check battery : check inserting battery ? */ + for (i=0; i<5; i++) { + buff[i] = sharpsl_read_MainBattery(); + mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT); + } + + if (sharpsl_pm.machinfo->discharge1) + sharpsl_pm.machinfo->discharge1(0); + + if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) { + udelay(100); + CHARGE_ON(); + DISCHARGE_OFF(); + } + + temp = get_select_val(buff); + dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %d\n", acin, temp, sharpsl_read_MainBattery()); + + if ((acin && (temp < SHARPSL_FATAL_ACIN_VOLT)) || + (!acin && (temp < SHARPSL_FATAL_NOACIN_VOLT))) + return -1; + return 0; +} + +static int sharpsl_off_charge_error(void) +{ + dev_err(sharpsl_pm.dev, "Offline Charger: Error occured.\n"); + CHARGE_OFF(); + CHARGE_LED_ERR(); + sharpsl_pm.charge_mode = CHRG_ERROR; + return 1; +} + +/* + * Charging Control while suspended + * Return 1 - go straight to sleep + * Return 0 - sleep or wakeup depending on other factors + */ +static int sharpsl_off_charge_battery(void) +{ + int time; + + dev_dbg(sharpsl_pm.dev, "Charge Mode: %d\n", sharpsl_pm.charge_mode); + + if (sharpsl_pm.charge_mode == CHRG_OFF) { + dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n"); + + /* AC Check */ + if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery(1) < 0)) + return sharpsl_off_charge_error(); + + /* Start Charging */ + CHARGE_LED_ON(); + CHARGE_OFF(); + mdelay(SHARPSL_CHARGE_WAIT_TIME); + CHARGE_ON(); + + sharpsl_pm.charge_mode = CHRG_ON; + sharpsl_pm.full_count = 0; + + return 1; + } else if (sharpsl_pm.charge_mode != CHRG_ON) { + return 1; + } + + if (sharpsl_pm.full_count == 0) { + int time; + + dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n"); + + if (sharpsl_check_battery(0) < 0) + return sharpsl_off_charge_error(); + + CHARGE_OFF(); + mdelay(SHARPSL_CHARGE_WAIT_TIME); + CHARGE_ON(); + sharpsl_pm.charge_mode = CHRG_ON; + + mdelay(SHARPSL_CHARGE_CO_CHECK_TIME); + + time = RCNR; + while(1) { + /* Check if any wakeup event had occured */ + if (sharpsl_pm.machinfo->charger_wakeup() != 0) + return 0; + /* Check for timeout */ + if ((RCNR - time) > SHARPSL_WAIT_CO_TIME) + return 1; + if (STATUS_CHRG_FULL) { + dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occured. Retrying to check\n"); + sharpsl_pm.full_count++; + CHARGE_OFF(); + mdelay(SHARPSL_CHARGE_WAIT_TIME); + CHARGE_ON(); + return 1; + } + } + } + + dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 3\n"); + + mdelay(SHARPSL_CHARGE_CO_CHECK_TIME); + + time = RCNR; + while(1) { + /* Check if any wakeup event had occured */ + if (sharpsl_pm.machinfo->charger_wakeup() != 0) + return 0; + /* Check for timeout */ + if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) { + if (sharpsl_pm.full_count > SHARPSL_CHARGE_RETRY_CNT) { + dev_dbg(sharpsl_pm.dev, "Offline Charger: Not charged sufficiently. Retrying.\n"); + sharpsl_pm.full_count = 0; + } + sharpsl_pm.full_count++; + return 1; + } + if (STATUS_CHRG_FULL) { + dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n"); + CHARGE_LED_OFF(); + CHARGE_OFF(); + sharpsl_pm.charge_mode = CHRG_DONE; + return 1; + } + } +} + + +static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_percent); +} + +static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_voltage); +} + +static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL); +static DEVICE_ATTR(battery_voltage, 0444, battery_voltage_show, NULL); + +extern void (*apm_get_power_status)(struct apm_power_info *); + +static void sharpsl_apm_get_power_status(struct apm_power_info *info) +{ + info->ac_line_status = sharpsl_pm.battstat.ac_status; + + if (sharpsl_pm.charge_mode == CHRG_ON) + info->battery_status = APM_BATTERY_STATUS_CHARGING; + else + info->battery_status = sharpsl_pm.battstat.mainbat_status; + + info->battery_flag = (1 << info->battery_status); + info->battery_life = sharpsl_pm.battstat.mainbat_percent; +} + +static struct pm_ops sharpsl_pm_ops = { + .pm_disk_mode = PM_DISK_FIRMWARE, + .prepare = pxa_pm_prepare, + .enter = corgi_pxa_pm_enter, + .finish = pxa_pm_finish, +}; + +static int __init sharpsl_pm_probe(struct device *dev) +{ + if (!dev->platform_data) + return -EINVAL; + + sharpsl_pm.dev = dev; + sharpsl_pm.machinfo = dev->platform_data; + sharpsl_pm.charge_mode = CHRG_OFF; + sharpsl_pm.flags = 0; + + sharpsl_pm.machinfo->init(); + + init_timer(&sharpsl_pm.ac_timer); + sharpsl_pm.ac_timer.function = sharpsl_ac_timer; + + init_timer(&sharpsl_pm.chrg_full_timer); + sharpsl_pm.chrg_full_timer.function = sharpsl_chrg_full_timer; + + pxa_gpio_mode(sharpsl_pm.machinfo->gpio_acin | GPIO_IN); + pxa_gpio_mode(sharpsl_pm.machinfo->gpio_batfull | GPIO_IN); + pxa_gpio_mode(sharpsl_pm.machinfo->gpio_batlock | GPIO_IN); + + /* Register interrupt handlers */ + if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, SA_INTERRUPT, "AC Input Detect", sharpsl_ac_isr)) { + dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin)); + } + else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin),IRQT_BOTHEDGE); + + if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, SA_INTERRUPT, "Battery Cover", sharpsl_fatal_isr)) { + dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock)); + } + else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock),IRQT_FALLING); + + if (sharpsl_pm.machinfo->gpio_fatal) { + if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, SA_INTERRUPT, "Fatal Battery", sharpsl_fatal_isr)) { + dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal)); + } + else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQT_FALLING); + } + + if (!machine_is_corgi()) + { + /* Register interrupt handler. */ + if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, SA_INTERRUPT, "CO", sharpsl_chrg_full_isr)) { + dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull)); + } + else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQT_RISING); + } + + device_create_file(dev, &dev_attr_battery_percentage); + device_create_file(dev, &dev_attr_battery_voltage); + + apm_get_power_status = sharpsl_apm_get_power_status; + + pm_set_ops(&sharpsl_pm_ops); + + mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250)); + + return 0; +} + +static int sharpsl_pm_remove(struct device *dev) +{ + pm_set_ops(NULL); + + device_remove_file(dev, &dev_attr_battery_percentage); + device_remove_file(dev, &dev_attr_battery_voltage); + + free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr); + free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr); + + if (sharpsl_pm.machinfo->gpio_fatal) + free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr); + + if (!machine_is_corgi()) + free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr); + + del_timer_sync(&sharpsl_pm.chrg_full_timer); + del_timer_sync(&sharpsl_pm.ac_timer); + + return 0; +} + +static struct device_driver sharpsl_pm_driver = { + .name = "sharpsl-pm", + .bus = &platform_bus_type, + .probe = sharpsl_pm_probe, + .remove = sharpsl_pm_remove, + .suspend = sharpsl_pm_suspend, + .resume = sharpsl_pm_resume, +}; + +static int __devinit sharpsl_pm_init(void) +{ + return driver_register(&sharpsl_pm_driver); +} + +static void sharpsl_pm_exit(void) +{ + driver_unregister(&sharpsl_pm_driver); +} + +late_initcall(sharpsl_pm_init); +module_exit(sharpsl_pm_exit); -- cgit v1.2.2 From b216c01829d0b73a468204e2e763c0a818b77a46 Mon Sep 17 00:00:00 2001 From: Liam Girdwood Date: Thu, 10 Nov 2005 17:45:39 +0000 Subject: [ARM] 3098/1: pxa2xx disable ssp irq Patch from Liam Girdwood This patch allows users of the pxa SSP driver to register their own irq handlers instead of using the default SSP handler. It also cleans up the CKEN clock and irq detection as the values are now stored in a table. This patch replaces 2845/1 Changes:- o Added flags parameter to ssp_init() o Added SSP_NO_IRQ flag to disable registering of ssp irq handler (for drivers that want to register their own handler) o Cleaned up clock and irq detection, values are now stored in table. o Added build changes to allow other drivers (e.g audio) to select the ssp driver. o corgi_ssp.c changed to use new interface. Signed-off-by: Liam Girdwood Signed-off-by: Richard Purdie Signed-off-by: Russell King --- arch/arm/mach-pxa/Kconfig | 7 +++ arch/arm/mach-pxa/Makefile | 5 +- arch/arm/mach-pxa/corgi_ssp.c | 2 +- arch/arm/mach-pxa/ssp.c | 128 +++++++++++++----------------------------- 4 files changed, 51 insertions(+), 91 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index b380a438e68f..e201aa9765b9 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -60,6 +60,7 @@ config MACH_CORGI bool "Enable Sharp SL-C700 (Corgi) Support" depends PXA_SHARPSL_25x select PXA_SHARP_C7xx + select PXA_SSP config MACH_SHEPHERD bool "Enable Sharp SL-C750 (Shepherd) Support" @@ -102,12 +103,18 @@ config IWMMXT config PXA_SHARP_C7xx bool + select PXA_SSP help Enable support for all Sharp C7xx models config PXA_SHARP_Cxx00 bool + select PXA_SSP help Enable common support for Sharp Cxx00 models +config PXA_SSP + tristate + help + Enable support for PXA2xx SSP ports endif diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 8bc72d07cea8..d210bd5032ce 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -11,8 +11,8 @@ obj-$(CONFIG_PXA27x) += pxa27x.o obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o obj-$(CONFIG_ARCH_PXA_IDP) += idp.o -obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o ssp.o -obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o ssp.o +obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o +obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o obj-$(CONFIG_MACH_POODLE) += poodle.o obj-$(CONFIG_MACH_TOSA) += tosa.o @@ -26,6 +26,7 @@ obj-$(CONFIG_LEDS) += $(led-y) # Misc features obj-$(CONFIG_PM) += pm.o sleep.o +obj-$(CONFIG_PXA_SSP) += ssp.o ifeq ($(CONFIG_PXA27x),y) obj-$(CONFIG_PM) += standby.o diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c index 591e5f32dbec..bdf10cfa9440 100644 --- a/arch/arm/mach-pxa/corgi_ssp.c +++ b/arch/arm/mach-pxa/corgi_ssp.c @@ -203,7 +203,7 @@ static int __init corgi_ssp_probe(struct device *dev) GPDR(ssp_machinfo->cs_ads7846) |= GPIO_bit(ssp_machinfo->cs_ads7846); /* output */ GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/ - ret = ssp_init(&corgi_ssp_dev,ssp_machinfo->port); + ret = ssp_init(&corgi_ssp_dev, ssp_machinfo->port, 0); if (ret) printk(KERN_ERR "Unable to register SSP handler!\n"); diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c index 4d826c021315..a68b30eff4d2 100644 --- a/arch/arm/mach-pxa/ssp.c +++ b/arch/arm/mach-pxa/ssp.c @@ -19,6 +19,8 @@ * 22nd Aug 2003 Initial version. * 20th Dec 2004 Added ssp_config for changing port config without * closing the port. + * 4th Aug 2005 Added option to disable irq handler registration and + * cleaned up irq and clock detection. */ #include @@ -37,6 +39,26 @@ #define PXA_SSP_PORTS 3 +struct ssp_info_ { + int irq; + u32 clock; +}; + +/* + * SSP port clock and IRQ settings + */ +static const struct ssp_info_ ssp_info[PXA_SSP_PORTS] = { +#if defined (CONFIG_PXA27x) + {IRQ_SSP, CKEN23_SSP1}, + {IRQ_SSP2, CKEN3_SSP2}, + {IRQ_SSP3, CKEN4_SSP3}, +#else + {IRQ_SSP, CKEN3_SSP}, + {IRQ_NSSP, CKEN9_NSSP}, + {IRQ_ASSP, CKEN10_ASSP}, +#endif +}; + static DECLARE_MUTEX(sem); static int use_count[PXA_SSP_PORTS] = {0, 0, 0}; @@ -210,9 +232,9 @@ int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 spee * %-EBUSY if the resources are already in use * %0 on success */ -int ssp_init(struct ssp_dev *dev, u32 port) +int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags) { - int ret, irq; + int ret; if (port > PXA_SSP_PORTS || port == 0) return -ENODEV; @@ -229,61 +251,20 @@ int ssp_init(struct ssp_dev *dev, u32 port) up(&sem); return -EBUSY; } - - switch (port) { - case 1: - irq = IRQ_SSP; - break; -#if defined (CONFIG_PXA27x) - case 2: - irq = IRQ_SSP2; - break; - case 3: - irq = IRQ_SSP3; - break; -#else - case 2: - irq = IRQ_NSSP; - break; - case 3: - irq = IRQ_ASSP; - break; -#endif - default: - return -ENODEV; - } - dev->port = port; - ret = request_irq(irq, ssp_interrupt, 0, "SSP", dev); - if (ret) - goto out_region; + /* do we need to get irq */ + if (!(init_flags & SSP_NO_IRQ)) { + ret = request_irq(ssp_info[port-1].irq, ssp_interrupt, + 0, "SSP", dev); + if (ret) + goto out_region; + dev->irq = ssp_info[port-1].irq; + } else + dev->irq = 0; /* turn on SSP port clock */ - switch (dev->port) { -#if defined (CONFIG_PXA27x) - case 1: - pxa_set_cken(CKEN23_SSP1, 1); - break; - case 2: - pxa_set_cken(CKEN3_SSP2, 1); - break; - case 3: - pxa_set_cken(CKEN4_SSP3, 1); - break; -#else - case 1: - pxa_set_cken(CKEN3_SSP, 1); - break; - case 2: - pxa_set_cken(CKEN9_NSSP, 1); - break; - case 3: - pxa_set_cken(CKEN10_ASSP, 1); - break; -#endif - } - + pxa_set_cken(ssp_info[port-1].clock, 1); up(&sem); return 0; @@ -301,46 +282,17 @@ out_region: */ void ssp_exit(struct ssp_dev *dev) { - int irq; - down(&sem); SSCR0_P(dev->port) &= ~SSCR0_SSE; - /* find irq, save power and turn off SSP port clock */ - switch (dev->port) { -#if defined (CONFIG_PXA27x) - case 1: - irq = IRQ_SSP; - pxa_set_cken(CKEN23_SSP1, 0); - break; - case 2: - irq = IRQ_SSP2; - pxa_set_cken(CKEN3_SSP2, 0); - break; - case 3: - irq = IRQ_SSP3; - pxa_set_cken(CKEN4_SSP3, 0); - break; -#else - case 1: - irq = IRQ_SSP; - pxa_set_cken(CKEN3_SSP, 0); - break; - case 2: - irq = IRQ_NSSP; - pxa_set_cken(CKEN9_NSSP, 0); - break; - case 3: - irq = IRQ_ASSP; - pxa_set_cken(CKEN10_ASSP, 0); - break; -#endif - default: - printk(KERN_WARNING "SSP: tried to close invalid port\n"); - return; + if (dev->port > PXA_SSP_PORTS || dev->port == 0) { + printk(KERN_WARNING "SSP: tried to close invalid port\n"); + return; } - free_irq(irq, dev); + pxa_set_cken(ssp_info[dev->port-1].clock, 0); + if (dev->irq) + free_irq(dev->irq, dev); release_mem_region(__PREG(SSCR0_P(dev->port)), 0x2c); use_count[dev->port - 1]--; up(&sem); -- cgit v1.2.2