From 25732ad493b22b7d9f0d250c5a9ad17219f96a47 Mon Sep 17 00:00:00 2001 From: Bruce Losure Date: Fri, 2 Sep 2005 15:16:35 -0500 Subject: [IA64] Altix patch for fpga reset 1) workaround a h/w reset issue 2) to improve the determination of FPGA-based h/w in the arch/ia64/sn/kernel/tiocx code. Signed-off-by: Bruce Losure Signed-off-by: Tony Luck --- arch/ia64/sn/kernel/tiocx.c | 62 ++++++++++++++++++++++++--------------------- 1 file changed, 33 insertions(+), 29 deletions(-) (limited to 'arch') diff --git a/arch/ia64/sn/kernel/tiocx.c b/arch/ia64/sn/kernel/tiocx.c index 254fe15c064b..d8664715764b 100644 --- a/arch/ia64/sn/kernel/tiocx.c +++ b/arch/ia64/sn/kernel/tiocx.c @@ -183,11 +183,12 @@ int cx_driver_unregister(struct cx_drv *cx_driver) * @part_num: device's part number * @mfg_num: device's manufacturer number * @hubdev: hub info associated with this device + * @bt: board type of the device * */ int cx_device_register(nasid_t nasid, int part_num, int mfg_num, - struct hubdev_info *hubdev) + struct hubdev_info *hubdev, int bt) { struct cx_dev *cx_dev; @@ -200,6 +201,7 @@ cx_device_register(nasid_t nasid, int part_num, int mfg_num, cx_dev->cx_id.mfg_num = mfg_num; cx_dev->cx_id.nasid = nasid; cx_dev->hubdev = hubdev; + cx_dev->bt = bt; cx_dev->dev.parent = NULL; cx_dev->dev.bus = &tiocx_bus_type; @@ -238,7 +240,8 @@ static int cx_device_reload(struct cx_dev *cx_dev) { cx_device_unregister(cx_dev); return cx_device_register(cx_dev->cx_id.nasid, cx_dev->cx_id.part_num, - cx_dev->cx_id.mfg_num, cx_dev->hubdev); + cx_dev->cx_id.mfg_num, cx_dev->hubdev, + cx_dev->bt); } static inline uint64_t tiocx_intr_alloc(nasid_t nasid, int widget, @@ -365,26 +368,20 @@ static void tio_corelet_reset(nasid_t nasid, int corelet) udelay(2000); } -static int tiocx_btchar_get(int nasid) +static int is_fpga_tio(int nasid, int *bt) { - moduleid_t module_id; - geoid_t geoid; - int cnodeid; - - cnodeid = nasid_to_cnodeid(nasid); - geoid = cnodeid_get_geoid(cnodeid); - module_id = geo_module(geoid); - return MODULE_GET_BTCHAR(module_id); -} + int ioboard_type; -static int is_fpga_brick(int nasid) -{ - switch (tiocx_btchar_get(nasid)) { + ioboard_type = ia64_sn_sysctl_ioboard_get(nasid); + + switch (ioboard_type) { case L1_BRICKTYPE_SA: case L1_BRICKTYPE_ATHENA: - case L1_BRICKTYPE_DAYTONA: + case L1_BOARDTYPE_DAYTONA: + *bt = ioboard_type; return 1; } + return 0; } @@ -407,16 +404,22 @@ static int tiocx_reload(struct cx_dev *cx_dev) if (bitstream_loaded(nasid)) { uint64_t cx_id; - - cx_id = - *(volatile uint64_t *)(TIO_SWIN_BASE(nasid, TIOCX_CORELET) + + int rv; + + rv = ia64_sn_sysctl_tio_clock_reset(nasid); + if (rv) { + printk(KERN_ALERT "CX port JTAG reset failed.\n"); + } else { + cx_id = *(volatile uint64_t *) + (TIO_SWIN_BASE(nasid, TIOCX_CORELET) + WIDGET_ID); - part_num = XWIDGET_PART_NUM(cx_id); - mfg_num = XWIDGET_MFG_NUM(cx_id); - DBG("part= 0x%x, mfg= 0x%x\n", part_num, mfg_num); - /* just ignore it if it's a CE */ - if (part_num == TIO_CE_ASIC_PARTNUM) - return 0; + part_num = XWIDGET_PART_NUM(cx_id); + mfg_num = XWIDGET_MFG_NUM(cx_id); + DBG("part= 0x%x, mfg= 0x%x\n", part_num, mfg_num); + /* just ignore it if it's a CE */ + if (part_num == TIO_CE_ASIC_PARTNUM) + return 0; + } } cx_dev->cx_id.part_num = part_num; @@ -436,10 +439,10 @@ static ssize_t show_cxdev_control(struct device *dev, struct device_attribute *a { struct cx_dev *cx_dev = to_cx_dev(dev); - return sprintf(buf, "0x%x 0x%x 0x%x %d\n", + return sprintf(buf, "0x%x 0x%x 0x%x 0x%x\n", cx_dev->cx_id.nasid, cx_dev->cx_id.part_num, cx_dev->cx_id.mfg_num, - tiocx_btchar_get(cx_dev->cx_id.nasid)); + cx_dev->bt); } static ssize_t store_cxdev_control(struct device *dev, struct device_attribute *attr, const char *buf, @@ -488,11 +491,12 @@ static int __init tiocx_init(void) for (cnodeid = 0; cnodeid < MAX_COMPACT_NODES; cnodeid++) { nasid_t nasid; + int bt; if ((nasid = cnodeid_to_nasid(cnodeid)) < 0) break; /* No more nasids .. bail out of loop */ - if ((nasid & 0x1) && is_fpga_brick(nasid)) { + if ((nasid & 0x1) && is_fpga_tio(nasid, &bt)) { struct hubdev_info *hubdev; struct xwidget_info *widgetp; @@ -512,7 +516,7 @@ static int __init tiocx_init(void) if (cx_device_register (nasid, widgetp->xwi_hwid.part_num, - widgetp->xwi_hwid.mfg_num, hubdev) < 0) + widgetp->xwi_hwid.mfg_num, hubdev, bt) < 0) return -ENXIO; else found_tiocx_device++; -- cgit v1.2.2 From a607c38971fd078865fa9bef39e6c1d4435680c8 Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Thu, 1 Sep 2005 14:01:37 -0500 Subject: [IA64-SGI] get XPC to cleanly disengage from remote memory references When XPC is being shutdown (i.e., rmmod, reboot) it doesn't ensure that other partitions with whom it was connected have completely disengaged from any attempt at cross-partition memory references. This can lead to MCAs in any of these other partitions when the partition is reset. Signed-off-by: Dean Nelson Signed-off-by: Tony Luck --- arch/ia64/sn/kernel/xpc.h | 288 +++++++++++++++++++++++++++++++--- arch/ia64/sn/kernel/xpc_channel.c | 216 +++++++++++++------------ arch/ia64/sn/kernel/xpc_main.c | 242 ++++++++++++++++++++-------- arch/ia64/sn/kernel/xpc_partition.c | 304 ++++++++++++++++++++++++++++++------ 4 files changed, 813 insertions(+), 237 deletions(-) (limited to 'arch') diff --git a/arch/ia64/sn/kernel/xpc.h b/arch/ia64/sn/kernel/xpc.h index d0ee635daf2e..565822ab3d08 100644 --- a/arch/ia64/sn/kernel/xpc.h +++ b/arch/ia64/sn/kernel/xpc.h @@ -57,7 +57,7 @@ #define XPC_NASID_FROM_W_B(_w, _b) (((_w) * 64 + (_b)) * 2) #define XPC_HB_DEFAULT_INTERVAL 5 /* incr HB every x secs */ -#define XPC_HB_CHECK_DEFAULT_TIMEOUT 20 /* check HB every x secs */ +#define XPC_HB_CHECK_DEFAULT_INTERVAL 20 /* check HB every x secs */ /* define the process name of HB checker and the CPU it is pinned to */ #define XPC_HB_CHECK_THREAD_NAME "xpc_hb" @@ -67,11 +67,6 @@ #define XPC_DISCOVERY_THREAD_NAME "xpc_discovery" -#define XPC_HB_ALLOWED(_p, _v) ((_v)->heartbeating_to_mask & (1UL << (_p))) -#define XPC_ALLOW_HB(_p, _v) (_v)->heartbeating_to_mask |= (1UL << (_p)) -#define XPC_DISALLOW_HB(_p, _v) (_v)->heartbeating_to_mask &= (~(1UL << (_p))) - - /* * Reserved Page provided by SAL. * @@ -88,14 +83,38 @@ struct xpc_rsvd_page { u8 version; u8 pad[6]; /* pad to u64 align */ volatile u64 vars_pa; + struct timespec stamp; /* time when reserved page was initialized */ u64 part_nasids[XP_NASID_MASK_WORDS] ____cacheline_aligned; u64 mach_nasids[XP_NASID_MASK_WORDS] ____cacheline_aligned; }; -#define XPC_RP_VERSION _XPC_VERSION(1,0) /* version 1.0 of the reserved page */ #define XPC_RSVD_PAGE_ALIGNED_SIZE \ (L1_CACHE_ALIGN(sizeof(struct xpc_rsvd_page))) +#define XPC_RP_VERSION _XPC_VERSION(1,1) /* version 1.1 of the reserved page */ + +#define XPC_SUPPORTS_RP_STAMP(_version) \ + (_version >= _XPC_VERSION(1,1)) + +/* + * compare stamps - the return value is: + * + * < 0, if stamp1 < stamp2 + * = 0, if stamp1 == stamp2 + * > 0, if stamp1 > stamp2 + */ +static inline int +xpc_compare_stamps(struct timespec *stamp1, struct timespec *stamp2) +{ + int ret; + + + if ((ret = stamp1->tv_sec - stamp2->tv_sec) == 0) { + ret = stamp1->tv_nsec - stamp2->tv_nsec; + } + return ret; +} + /* * Define the structures by which XPC variables can be exported to other @@ -121,12 +140,61 @@ struct xpc_vars { u64 vars_part_pa; u64 amos_page_pa; /* paddr of page of AMOs from MSPEC driver */ AMO_t *amos_page; /* vaddr of page of AMOs from MSPEC driver */ - AMO_t *act_amos; /* pointer to the first activation AMO */ }; -#define XPC_V_VERSION _XPC_VERSION(3,0) /* version 3.0 of the cross vars */ #define XPC_VARS_ALIGNED_SIZE (L1_CACHE_ALIGN(sizeof(struct xpc_vars))) +#define XPC_V_VERSION _XPC_VERSION(3,1) /* version 3.1 of the cross vars */ + +#define XPC_SUPPORTS_DISENGAGE_REQUEST(_version) \ + (_version >= _XPC_VERSION(3,1)) + + +static inline int +xpc_hb_allowed(partid_t partid, struct xpc_vars *vars) +{ + return ((vars->heartbeating_to_mask & (1UL << partid)) != 0); +} + +static inline void +xpc_allow_hb(partid_t partid, struct xpc_vars *vars) +{ + u64 old_mask, new_mask; + + do { + old_mask = vars->heartbeating_to_mask; + new_mask = (old_mask | (1UL << partid)); + } while (cmpxchg(&vars->heartbeating_to_mask, old_mask, new_mask) != + old_mask); +} + +static inline void +xpc_disallow_hb(partid_t partid, struct xpc_vars *vars) +{ + u64 old_mask, new_mask; + + do { + old_mask = vars->heartbeating_to_mask; + new_mask = (old_mask & ~(1UL << partid)); + } while (cmpxchg(&vars->heartbeating_to_mask, old_mask, new_mask) != + old_mask); +} + + +/* + * The AMOs page consists of a number of AMO variables which are divided into + * four groups, The first two groups are used to identify an IRQ's sender. + * These two groups consist of 64 and 16 AMO variables respectively. The last + * two groups, consisting of just one AMO variable each, are used to identify + * the remote partitions that are currently engaged (from the viewpoint of + * the XPC running on the remote partition). + */ +#define XPC_NOTIFY_IRQ_AMOS 0 +#define XPC_ACTIVATE_IRQ_AMOS (XPC_NOTIFY_IRQ_AMOS + XP_MAX_PARTITIONS) +#define XPC_ENGAGED_PARTITIONS_AMO (XPC_ACTIVATE_IRQ_AMOS + XP_NASID_MASK_WORDS) +#define XPC_DISENGAGE_REQUEST_AMO (XPC_ENGAGED_PARTITIONS_AMO + 1) + + /* * The following structure describes the per partition specific variables. * @@ -358,7 +426,7 @@ struct xpc_channel { void *key; /* pointer to user's key */ struct semaphore msg_to_pull_sema; /* next msg to pull serialization */ - struct semaphore teardown_sema; /* wait for teardown completion */ + struct semaphore wdisconnect_sema; /* wait for channel disconnect */ struct xpc_openclose_args *local_openclose_args; /* args passed on */ /* opening or closing of channel */ @@ -410,6 +478,7 @@ struct xpc_channel { #define XPC_C_DISCONNECTED 0x00002000 /* channel is disconnected */ #define XPC_C_DISCONNECTING 0x00004000 /* channel is being disconnected */ +#define XPC_C_WDISCONNECT 0x00008000 /* waiting for channel disconnect */ @@ -422,6 +491,8 @@ struct xpc_partition { /* XPC HB infrastructure */ + u8 remote_rp_version; /* version# of partition's rsvd pg */ + struct timespec remote_rp_stamp;/* time when rsvd pg was initialized */ u64 remote_rp_pa; /* phys addr of partition's rsvd pg */ u64 remote_vars_pa; /* phys addr of partition's vars */ u64 remote_vars_part_pa; /* phys addr of partition's vars part */ @@ -432,10 +503,14 @@ struct xpc_partition { u32 act_IRQ_rcvd; /* IRQs since activation */ spinlock_t act_lock; /* protect updating of act_state */ u8 act_state; /* from XPC HB viewpoint */ + u8 remote_vars_version; /* version# of partition's vars */ enum xpc_retval reason; /* reason partition is deactivating */ int reason_line; /* line# deactivation initiated from */ int reactivate_nasid; /* nasid in partition to reactivate */ + unsigned long disengage_request_timeout; /* timeout in XPC_TICKS */ + struct timer_list disengage_request_timer; + /* XPC infrastructure referencing and teardown control */ @@ -454,6 +529,7 @@ struct xpc_partition { u8 nchannels; /* #of defined channels supported */ atomic_t nchannels_active; /* #of channels that are not DISCONNECTED */ + atomic_t nchannels_engaged;/* #of channels engaged with remote part */ struct xpc_channel *channels;/* array of channel structures */ void *local_GPs_base; /* base address of kmalloc'd space */ @@ -518,6 +594,7 @@ struct xpc_partition { #define XPC_P_TORNDOWN 0x03 /* infrastructure is torndown */ + /* * struct xpc_partition IPI_timer #of seconds to wait before checking for * dropped IPIs. These occur whenever an IPI amo write doesn't complete until @@ -526,6 +603,13 @@ struct xpc_partition { #define XPC_P_DROPPED_IPI_WAIT (0.25 * HZ) +/* number of seconds to wait for other partitions to disengage */ +#define XPC_DISENGAGE_REQUEST_TIMELIMIT 90 + +/* interval in seconds to print 'waiting disengagement' messages */ +#define XPC_DISENGAGE_PRINTMSG_INTERVAL 10 + + #define XPC_PARTID(_p) ((partid_t) ((_p) - &xpc_partitions[0])) @@ -550,8 +634,6 @@ extern void xpc_activate_partition(struct xpc_partition *); /* found in xpc_partition.c */ extern int xpc_exiting; -extern int xpc_hb_interval; -extern int xpc_hb_check_interval; extern struct xpc_vars *xpc_vars; extern struct xpc_rsvd_page *xpc_rsvd_page; extern struct xpc_vars_part *xpc_vars_part; @@ -561,6 +643,7 @@ extern struct xpc_rsvd_page *xpc_rsvd_page_init(void); extern void xpc_allow_IPI_ops(void); extern void xpc_restrict_IPI_ops(void); extern int xpc_identify_act_IRQ_sender(void); +extern int xpc_partition_disengaged(struct xpc_partition *); extern enum xpc_retval xpc_mark_partition_active(struct xpc_partition *); extern void xpc_mark_partition_inactive(struct xpc_partition *); extern void xpc_discovery(void); @@ -585,8 +668,8 @@ extern void xpc_connected_callout(struct xpc_channel *); extern void xpc_deliver_msg(struct xpc_channel *); extern void xpc_disconnect_channel(const int, struct xpc_channel *, enum xpc_retval, unsigned long *); -extern void xpc_disconnected_callout(struct xpc_channel *); -extern void xpc_partition_down(struct xpc_partition *, enum xpc_retval); +extern void xpc_disconnecting_callout(struct xpc_channel *); +extern void xpc_partition_going_down(struct xpc_partition *, enum xpc_retval); extern void xpc_teardown_infrastructure(struct xpc_partition *); @@ -673,6 +756,157 @@ xpc_part_ref(struct xpc_partition *part) +/* + * This next set of inlines are used to keep track of when a partition is + * potentially engaged in accessing memory belonging to another partition. + */ + +static inline void +xpc_mark_partition_engaged(struct xpc_partition *part) +{ + unsigned long irq_flags; + AMO_t *amo = (AMO_t *) __va(part->remote_amos_page_pa + + (XPC_ENGAGED_PARTITIONS_AMO * sizeof(AMO_t))); + + + local_irq_save(irq_flags); + + /* set bit corresponding to our partid in remote partition's AMO */ + FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_OR, + (1UL << sn_partition_id)); + /* + * We must always use the nofault function regardless of whether we + * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we + * didn't, we'd never know that the other partition is down and would + * keep sending IPIs and AMOs to it until the heartbeat times out. + */ + (void) xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo-> + variable), xp_nofault_PIOR_target)); + + local_irq_restore(irq_flags); +} + +static inline void +xpc_mark_partition_disengaged(struct xpc_partition *part) +{ + unsigned long irq_flags; + AMO_t *amo = (AMO_t *) __va(part->remote_amos_page_pa + + (XPC_ENGAGED_PARTITIONS_AMO * sizeof(AMO_t))); + + + local_irq_save(irq_flags); + + /* clear bit corresponding to our partid in remote partition's AMO */ + FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_AND, + ~(1UL << sn_partition_id)); + /* + * We must always use the nofault function regardless of whether we + * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we + * didn't, we'd never know that the other partition is down and would + * keep sending IPIs and AMOs to it until the heartbeat times out. + */ + (void) xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo-> + variable), xp_nofault_PIOR_target)); + + local_irq_restore(irq_flags); +} + +static inline void +xpc_request_partition_disengage(struct xpc_partition *part) +{ + unsigned long irq_flags; + AMO_t *amo = (AMO_t *) __va(part->remote_amos_page_pa + + (XPC_DISENGAGE_REQUEST_AMO * sizeof(AMO_t))); + + + local_irq_save(irq_flags); + + /* set bit corresponding to our partid in remote partition's AMO */ + FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_OR, + (1UL << sn_partition_id)); + /* + * We must always use the nofault function regardless of whether we + * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we + * didn't, we'd never know that the other partition is down and would + * keep sending IPIs and AMOs to it until the heartbeat times out. + */ + (void) xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo-> + variable), xp_nofault_PIOR_target)); + + local_irq_restore(irq_flags); +} + +static inline void +xpc_cancel_partition_disengage_request(struct xpc_partition *part) +{ + unsigned long irq_flags; + AMO_t *amo = (AMO_t *) __va(part->remote_amos_page_pa + + (XPC_DISENGAGE_REQUEST_AMO * sizeof(AMO_t))); + + + local_irq_save(irq_flags); + + /* clear bit corresponding to our partid in remote partition's AMO */ + FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_AND, + ~(1UL << sn_partition_id)); + /* + * We must always use the nofault function regardless of whether we + * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we + * didn't, we'd never know that the other partition is down and would + * keep sending IPIs and AMOs to it until the heartbeat times out. + */ + (void) xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo-> + variable), xp_nofault_PIOR_target)); + + local_irq_restore(irq_flags); +} + +static inline u64 +xpc_partition_engaged(u64 partid_mask) +{ + AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO; + + + /* return our partition's AMO variable ANDed with partid_mask */ + return (FETCHOP_LOAD_OP(TO_AMO((u64) &amo->variable), FETCHOP_LOAD) & + partid_mask); +} + +static inline u64 +xpc_partition_disengage_requested(u64 partid_mask) +{ + AMO_t *amo = xpc_vars->amos_page + XPC_DISENGAGE_REQUEST_AMO; + + + /* return our partition's AMO variable ANDed with partid_mask */ + return (FETCHOP_LOAD_OP(TO_AMO((u64) &amo->variable), FETCHOP_LOAD) & + partid_mask); +} + +static inline void +xpc_clear_partition_engaged(u64 partid_mask) +{ + AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO; + + + /* clear bit(s) based on partid_mask in our partition's AMO */ + FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_AND, + ~partid_mask); +} + +static inline void +xpc_clear_partition_disengage_request(u64 partid_mask) +{ + AMO_t *amo = xpc_vars->amos_page + XPC_DISENGAGE_REQUEST_AMO; + + + /* clear bit(s) based on partid_mask in our partition's AMO */ + FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_AND, + ~partid_mask); +} + + + /* * The following set of macros and inlines are used for the sending and * receiving of IPIs (also known as IRQs). There are two flavors of IPIs, @@ -722,13 +956,13 @@ xpc_IPI_send(AMO_t *amo, u64 flag, int nasid, int phys_cpuid, int vector) * Flag the appropriate AMO variable and send an IPI to the specified node. */ static inline void -xpc_activate_IRQ_send(u64 amos_page, int from_nasid, int to_nasid, +xpc_activate_IRQ_send(u64 amos_page_pa, int from_nasid, int to_nasid, int to_phys_cpuid) { int w_index = XPC_NASID_W_INDEX(from_nasid); int b_index = XPC_NASID_B_INDEX(from_nasid); - AMO_t *amos = (AMO_t *) __va(amos_page + - (XP_MAX_PARTITIONS * sizeof(AMO_t))); + AMO_t *amos = (AMO_t *) __va(amos_page_pa + + (XPC_ACTIVATE_IRQ_AMOS * sizeof(AMO_t))); (void) xpc_IPI_send(&amos[w_index], (1UL << b_index), to_nasid, @@ -756,6 +990,13 @@ xpc_IPI_send_reactivate(struct xpc_partition *part) xpc_vars->act_nasid, xpc_vars->act_phys_cpuid); } +static inline void +xpc_IPI_send_disengage(struct xpc_partition *part) +{ + xpc_activate_IRQ_send(part->remote_amos_page_pa, cnodeid_to_nasid(0), + part->remote_act_nasid, part->remote_act_phys_cpuid); +} + /* * IPIs associated with SGI_XPC_NOTIFY IRQ. @@ -903,17 +1144,18 @@ xpc_IPI_send_local_msgrequest(struct xpc_channel *ch) * cacheable mapping for the entire region. This will prevent speculative * reading of cached copies of our lines from being issued which will cause * a PI FSB Protocol error to be generated by the SHUB. For XPC, we need 64 - * (XP_MAX_PARTITIONS) AMO variables for message notification (xpc_main.c) - * and an additional 16 AMO variables for partition activation (xpc_hb.c). + * (XP_MAX_PARTITIONS) AMO variables for message notification and an + * additional 16 (XP_NASID_MASK_WORDS) AMO variables for partition activation + * and 2 AMO variables for partition deactivation. */ static inline AMO_t * -xpc_IPI_init(partid_t partid) +xpc_IPI_init(int index) { - AMO_t *part_amo = xpc_vars->amos_page + partid; + AMO_t *amo = xpc_vars->amos_page + index; - xpc_IPI_receive(part_amo); - return part_amo; + (void) xpc_IPI_receive(amo); /* clear AMO variable */ + return amo; } diff --git a/arch/ia64/sn/kernel/xpc_channel.c b/arch/ia64/sn/kernel/xpc_channel.c index 94698bea7be0..195ac1b8e262 100644 --- a/arch/ia64/sn/kernel/xpc_channel.c +++ b/arch/ia64/sn/kernel/xpc_channel.c @@ -57,6 +57,7 @@ xpc_initialize_channels(struct xpc_partition *part, partid_t partid) spin_lock_init(&ch->lock); sema_init(&ch->msg_to_pull_sema, 1); /* mutex */ + sema_init(&ch->wdisconnect_sema, 0); /* event wait */ atomic_set(&ch->n_on_msg_allocate_wq, 0); init_waitqueue_head(&ch->msg_allocate_wq); @@ -166,6 +167,7 @@ xpc_setup_infrastructure(struct xpc_partition *part) xpc_initialize_channels(part, partid); atomic_set(&part->nchannels_active, 0); + atomic_set(&part->nchannels_engaged, 0); /* local_IPI_amo were set to 0 by an earlier memset() */ @@ -555,8 +557,6 @@ xpc_allocate_msgqueues(struct xpc_channel *ch) sema_init(&ch->notify_queue[i].sema, 0); } - sema_init(&ch->teardown_sema, 0); /* event wait */ - spin_lock_irqsave(&ch->lock, irq_flags); ch->flags |= XPC_C_SETUP; spin_unlock_irqrestore(&ch->lock, irq_flags); @@ -625,6 +625,55 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags) } +/* + * Notify those who wanted to be notified upon delivery of their message. + */ +static void +xpc_notify_senders(struct xpc_channel *ch, enum xpc_retval reason, s64 put) +{ + struct xpc_notify *notify; + u8 notify_type; + s64 get = ch->w_remote_GP.get - 1; + + + while (++get < put && atomic_read(&ch->n_to_notify) > 0) { + + notify = &ch->notify_queue[get % ch->local_nentries]; + + /* + * See if the notify entry indicates it was associated with + * a message who's sender wants to be notified. It is possible + * that it is, but someone else is doing or has done the + * notification. + */ + notify_type = notify->type; + if (notify_type == 0 || + cmpxchg(¬ify->type, notify_type, 0) != + notify_type) { + continue; + } + + DBUG_ON(notify_type != XPC_N_CALL); + + atomic_dec(&ch->n_to_notify); + + if (notify->func != NULL) { + dev_dbg(xpc_chan, "notify->func() called, notify=0x%p, " + "msg_number=%ld, partid=%d, channel=%d\n", + (void *) notify, get, ch->partid, ch->number); + + notify->func(reason, ch->partid, ch->number, + notify->key); + + dev_dbg(xpc_chan, "notify->func() returned, " + "notify=0x%p, msg_number=%ld, partid=%d, " + "channel=%d\n", (void *) notify, get, + ch->partid, ch->number); + } + } +} + + /* * Free up message queues and other stuff that were allocated for the specified * channel. @@ -669,9 +718,6 @@ xpc_free_msgqueues(struct xpc_channel *ch) ch->remote_msgqueue = NULL; kfree(ch->notify_queue); ch->notify_queue = NULL; - - /* in case someone is waiting for the teardown to complete */ - up(&ch->teardown_sema); } } @@ -683,7 +729,7 @@ static void xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags) { struct xpc_partition *part = &xpc_partitions[ch->partid]; - u32 ch_flags = ch->flags; + u32 channel_was_connected = (ch->flags & XPC_C_WASCONNECTED); DBUG_ON(!spin_is_locked(&ch->lock)); @@ -701,12 +747,13 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags) } DBUG_ON(atomic_read(&ch->kthreads_assigned) != 0); - /* it's now safe to free the channel's message queues */ - - xpc_free_msgqueues(ch); - DBUG_ON(ch->flags & XPC_C_SETUP); + if (part->act_state == XPC_P_DEACTIVATING) { + /* can't proceed until the other side disengages from us */ + if (xpc_partition_engaged(1UL << ch->partid)) { + return; + } - if (part->act_state != XPC_P_DEACTIVATING) { + } else { /* as long as the other side is up do the full protocol */ @@ -724,16 +771,33 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags) } } + /* wake those waiting for notify completion */ + if (atomic_read(&ch->n_to_notify) > 0) { + /* >>> we do callout while holding ch->lock */ + xpc_notify_senders(ch, ch->reason, ch->w_local_GP.put); + } + /* both sides are disconnected now */ - ch->flags = XPC_C_DISCONNECTED; /* clear all flags, but this one */ + /* it's now safe to free the channel's message queues */ + xpc_free_msgqueues(ch); + + /* mark disconnected, clear all other flags except XPC_C_WDISCONNECT */ + ch->flags = (XPC_C_DISCONNECTED | (ch->flags & XPC_C_WDISCONNECT)); atomic_dec(&part->nchannels_active); - if (ch_flags & XPC_C_WASCONNECTED) { + if (channel_was_connected) { dev_info(xpc_chan, "channel %d to partition %d disconnected, " "reason=%d\n", ch->number, ch->partid, ch->reason); } + + /* wake the thread that is waiting for this channel to disconnect */ + if (ch->flags & XPC_C_WDISCONNECT) { + spin_unlock_irqrestore(&ch->lock, *irq_flags); + up(&ch->wdisconnect_sema); + spin_lock_irqsave(&ch->lock, *irq_flags); + } } @@ -764,7 +828,7 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number, /* * If RCLOSEREQUEST is set, we're probably waiting for * RCLOSEREPLY. We should find it and a ROPENREQUEST packed - * with this RCLOSEQREUQEST in the IPI_flags. + * with this RCLOSEREQUEST in the IPI_flags. */ if (ch->flags & XPC_C_RCLOSEREQUEST) { @@ -852,7 +916,7 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number, "channel=%d\n", args->msg_size, args->local_nentries, ch->partid, ch->number); - if ((ch->flags & XPC_C_DISCONNECTING) || + if ((ch->flags & (XPC_C_DISCONNECTING | XPC_C_WDISCONNECT)) || part->act_state == XPC_P_DEACTIVATING) { spin_unlock_irqrestore(&ch->lock, irq_flags); return; @@ -1039,55 +1103,6 @@ xpc_connect_channel(struct xpc_channel *ch) } -/* - * Notify those who wanted to be notified upon delivery of their message. - */ -static void -xpc_notify_senders(struct xpc_channel *ch, enum xpc_retval reason, s64 put) -{ - struct xpc_notify *notify; - u8 notify_type; - s64 get = ch->w_remote_GP.get - 1; - - - while (++get < put && atomic_read(&ch->n_to_notify) > 0) { - - notify = &ch->notify_queue[get % ch->local_nentries]; - - /* - * See if the notify entry indicates it was associated with - * a message who's sender wants to be notified. It is possible - * that it is, but someone else is doing or has done the - * notification. - */ - notify_type = notify->type; - if (notify_type == 0 || - cmpxchg(¬ify->type, notify_type, 0) != - notify_type) { - continue; - } - - DBUG_ON(notify_type != XPC_N_CALL); - - atomic_dec(&ch->n_to_notify); - - if (notify->func != NULL) { - dev_dbg(xpc_chan, "notify->func() called, notify=0x%p, " - "msg_number=%ld, partid=%d, channel=%d\n", - (void *) notify, get, ch->partid, ch->number); - - notify->func(reason, ch->partid, ch->number, - notify->key); - - dev_dbg(xpc_chan, "notify->func() returned, " - "notify=0x%p, msg_number=%ld, partid=%d, " - "channel=%d\n", (void *) notify, get, - ch->partid, ch->number); - } - } -} - - /* * Clear some of the msg flags in the local message queue. */ @@ -1240,6 +1255,7 @@ xpc_process_channel_activity(struct xpc_partition *part) u64 IPI_amo, IPI_flags; struct xpc_channel *ch; int ch_number; + u32 ch_flags; IPI_amo = xpc_get_IPI_flags(part); @@ -1266,8 +1282,9 @@ xpc_process_channel_activity(struct xpc_partition *part) xpc_process_openclose_IPI(part, ch_number, IPI_flags); } + ch_flags = ch->flags; /* need an atomic snapshot of flags */ - if (ch->flags & XPC_C_DISCONNECTING) { + if (ch_flags & XPC_C_DISCONNECTING) { spin_lock_irqsave(&ch->lock, irq_flags); xpc_process_disconnect(ch, &irq_flags); spin_unlock_irqrestore(&ch->lock, irq_flags); @@ -1278,9 +1295,9 @@ xpc_process_channel_activity(struct xpc_partition *part) continue; } - if (!(ch->flags & XPC_C_CONNECTED)) { - if (!(ch->flags & XPC_C_OPENREQUEST)) { - DBUG_ON(ch->flags & XPC_C_SETUP); + if (!(ch_flags & XPC_C_CONNECTED)) { + if (!(ch_flags & XPC_C_OPENREQUEST)) { + DBUG_ON(ch_flags & XPC_C_SETUP); (void) xpc_connect_channel(ch); } else { spin_lock_irqsave(&ch->lock, irq_flags); @@ -1305,8 +1322,8 @@ xpc_process_channel_activity(struct xpc_partition *part) /* - * XPC's heartbeat code calls this function to inform XPC that a partition has - * gone down. XPC responds by tearing down the XPartition Communication + * XPC's heartbeat code calls this function to inform XPC that a partition is + * going down. XPC responds by tearing down the XPartition Communication * infrastructure used for the just downed partition. * * XPC's heartbeat code will never call this function and xpc_partition_up() @@ -1314,7 +1331,7 @@ xpc_process_channel_activity(struct xpc_partition *part) * at the same time. */ void -xpc_partition_down(struct xpc_partition *part, enum xpc_retval reason) +xpc_partition_going_down(struct xpc_partition *part, enum xpc_retval reason) { unsigned long irq_flags; int ch_number; @@ -1330,12 +1347,11 @@ xpc_partition_down(struct xpc_partition *part, enum xpc_retval reason) } - /* disconnect all channels associated with the downed partition */ + /* disconnect channels associated with the partition going down */ for (ch_number = 0; ch_number < part->nchannels; ch_number++) { ch = &part->channels[ch_number]; - xpc_msgqueue_ref(ch); spin_lock_irqsave(&ch->lock, irq_flags); @@ -1370,6 +1386,7 @@ xpc_teardown_infrastructure(struct xpc_partition *part) * this partition. */ + DBUG_ON(atomic_read(&part->nchannels_engaged) != 0); DBUG_ON(atomic_read(&part->nchannels_active) != 0); DBUG_ON(part->setup_state != XPC_P_SETUP); part->setup_state = XPC_P_WTEARDOWN; @@ -1506,8 +1523,12 @@ xpc_initiate_disconnect(int ch_number) spin_lock_irqsave(&ch->lock, irq_flags); - XPC_DISCONNECT_CHANNEL(ch, xpcUnregistering, + if (!(ch->flags & XPC_C_DISCONNECTED)) { + ch->flags |= XPC_C_WDISCONNECT; + + XPC_DISCONNECT_CHANNEL(ch, xpcUnregistering, &irq_flags); + } spin_unlock_irqrestore(&ch->lock, irq_flags); @@ -1523,8 +1544,9 @@ xpc_initiate_disconnect(int ch_number) /* * To disconnect a channel, and reflect it back to all who may be waiting. * - * >>> An OPEN is not allowed until XPC_C_DISCONNECTING is cleared by - * >>> xpc_free_msgqueues(). + * An OPEN is not allowed until XPC_C_DISCONNECTING is cleared by + * xpc_process_disconnect(), and if set, XPC_C_WDISCONNECT is cleared by + * xpc_disconnect_wait(). * * THE CHANNEL IS TO BE LOCKED BY THE CALLER AND WILL REMAIN LOCKED UPON RETURN. */ @@ -1532,7 +1554,7 @@ void xpc_disconnect_channel(const int line, struct xpc_channel *ch, enum xpc_retval reason, unsigned long *irq_flags) { - u32 flags; + u32 channel_was_connected = (ch->flags & XPC_C_CONNECTED); DBUG_ON(!spin_is_locked(&ch->lock)); @@ -1547,61 +1569,53 @@ xpc_disconnect_channel(const int line, struct xpc_channel *ch, XPC_SET_REASON(ch, reason, line); - flags = ch->flags; + ch->flags |= (XPC_C_CLOSEREQUEST | XPC_C_DISCONNECTING); /* some of these may not have been set */ ch->flags &= ~(XPC_C_OPENREQUEST | XPC_C_OPENREPLY | XPC_C_ROPENREQUEST | XPC_C_ROPENREPLY | XPC_C_CONNECTING | XPC_C_CONNECTED); - ch->flags |= (XPC_C_CLOSEREQUEST | XPC_C_DISCONNECTING); xpc_IPI_send_closerequest(ch, irq_flags); - if (flags & XPC_C_CONNECTED) { + if (channel_was_connected) { ch->flags |= XPC_C_WASCONNECTED; } + spin_unlock_irqrestore(&ch->lock, *irq_flags); + + /* wake all idle kthreads so they can exit */ if (atomic_read(&ch->kthreads_idle) > 0) { - /* wake all idle kthreads so they can exit */ wake_up_all(&ch->idle_wq); } - spin_unlock_irqrestore(&ch->lock, *irq_flags); - - /* wake those waiting to allocate an entry from the local msg queue */ - if (atomic_read(&ch->n_on_msg_allocate_wq) > 0) { wake_up(&ch->msg_allocate_wq); } - /* wake those waiting for notify completion */ - - if (atomic_read(&ch->n_to_notify) > 0) { - xpc_notify_senders(ch, reason, ch->w_local_GP.put); - } - spin_lock_irqsave(&ch->lock, *irq_flags); } void -xpc_disconnected_callout(struct xpc_channel *ch) +xpc_disconnecting_callout(struct xpc_channel *ch) { /* - * Let the channel's registerer know that the channel is now + * Let the channel's registerer know that the channel is being * disconnected. We don't want to do this if the registerer was never - * informed of a connection being made, unless the disconnect was for - * abnormal reasons. + * informed of a connection being made. */ if (ch->func != NULL) { - dev_dbg(xpc_chan, "ch->func() called, reason=%d, partid=%d, " - "channel=%d\n", ch->reason, ch->partid, ch->number); + dev_dbg(xpc_chan, "ch->func() called, reason=xpcDisconnecting," + " partid=%d, channel=%d\n", ch->partid, ch->number); - ch->func(ch->reason, ch->partid, ch->number, NULL, ch->key); + ch->func(xpcDisconnecting, ch->partid, ch->number, NULL, + ch->key); - dev_dbg(xpc_chan, "ch->func() returned, reason=%d, partid=%d, " - "channel=%d\n", ch->reason, ch->partid, ch->number); + dev_dbg(xpc_chan, "ch->func() returned, reason=" + "xpcDisconnecting, partid=%d, channel=%d\n", + ch->partid, ch->number); } } @@ -1848,7 +1862,7 @@ xpc_send_msg(struct xpc_channel *ch, struct xpc_msg *msg, u8 notify_type, xpc_notify_func func, void *key) { enum xpc_retval ret = xpcSuccess; - struct xpc_notify *notify = NULL; // >>> to keep the compiler happy!! + struct xpc_notify *notify = notify; s64 put, msg_number = msg->number; diff --git a/arch/ia64/sn/kernel/xpc_main.c b/arch/ia64/sn/kernel/xpc_main.c index bb1d5cf30440..feece200b3c3 100644 --- a/arch/ia64/sn/kernel/xpc_main.c +++ b/arch/ia64/sn/kernel/xpc_main.c @@ -54,6 +54,7 @@ #include #include #include +#include #include #include #include @@ -82,11 +83,13 @@ struct device *xpc_chan = &xpc_chan_dbg_subname; /* systune related variables for /proc/sys directories */ -static int xpc_hb_min = 1; -static int xpc_hb_max = 10; +static int xpc_hb_interval = XPC_HB_DEFAULT_INTERVAL; +static int xpc_hb_min_interval = 1; +static int xpc_hb_max_interval = 10; -static int xpc_hb_check_min = 10; -static int xpc_hb_check_max = 120; +static int xpc_hb_check_interval = XPC_HB_CHECK_DEFAULT_INTERVAL; +static int xpc_hb_check_min_interval = 10; +static int xpc_hb_check_max_interval = 120; static ctl_table xpc_sys_xpc_hb_dir[] = { { @@ -99,7 +102,8 @@ static ctl_table xpc_sys_xpc_hb_dir[] = { &proc_dointvec_minmax, &sysctl_intvec, NULL, - &xpc_hb_min, &xpc_hb_max + &xpc_hb_min_interval, + &xpc_hb_max_interval }, { 2, @@ -111,7 +115,8 @@ static ctl_table xpc_sys_xpc_hb_dir[] = { &proc_dointvec_minmax, &sysctl_intvec, NULL, - &xpc_hb_check_min, &xpc_hb_check_max + &xpc_hb_check_min_interval, + &xpc_hb_check_max_interval }, {0} }; @@ -148,11 +153,11 @@ static DECLARE_WAIT_QUEUE_HEAD(xpc_act_IRQ_wq); static unsigned long xpc_hb_check_timeout; -/* xpc_hb_checker thread exited notification */ -static DECLARE_MUTEX_LOCKED(xpc_hb_checker_exited); +/* used as an indication of when the xpc_hb_checker thread is inactive */ +static DECLARE_MUTEX_LOCKED(xpc_hb_checker_inactive); -/* xpc_discovery thread exited notification */ -static DECLARE_MUTEX_LOCKED(xpc_discovery_exited); +/* used as an indication of when the xpc_discovery thread is inactive */ +static DECLARE_MUTEX_LOCKED(xpc_discovery_inactive); static struct timer_list xpc_hb_timer; @@ -161,6 +166,30 @@ static struct timer_list xpc_hb_timer; static void xpc_kthread_waitmsgs(struct xpc_partition *, struct xpc_channel *); +static int xpc_system_reboot(struct notifier_block *, unsigned long, void *); +static struct notifier_block xpc_reboot_notifier = { + .notifier_call = xpc_system_reboot, +}; + + +/* + * Timer function to enforce the timelimit on the partition disengage request. + */ +static void +xpc_timeout_partition_disengage_request(unsigned long data) +{ + struct xpc_partition *part = (struct xpc_partition *) data; + + + DBUG_ON(XPC_TICKS < part->disengage_request_timeout); + + (void) xpc_partition_disengaged(part); + + DBUG_ON(part->disengage_request_timeout != 0); + DBUG_ON(xpc_partition_engaged(1UL << XPC_PARTID(part)) != 0); +} + + /* * Notify the heartbeat check thread that an IRQ has been received. */ @@ -214,12 +243,6 @@ xpc_hb_checker(void *ignore) while (!(volatile int) xpc_exiting) { - /* wait for IRQ or timeout */ - (void) wait_event_interruptible(xpc_act_IRQ_wq, - (last_IRQ_count < atomic_read(&xpc_act_IRQ_rcvd) || - jiffies >= xpc_hb_check_timeout || - (volatile int) xpc_exiting)); - dev_dbg(xpc_part, "woke up with %d ticks rem; %d IRQs have " "been received\n", (int) (xpc_hb_check_timeout - jiffies), @@ -240,6 +263,7 @@ xpc_hb_checker(void *ignore) } + /* check for outstanding IRQs */ new_IRQ_count = atomic_read(&xpc_act_IRQ_rcvd); if (last_IRQ_count < new_IRQ_count || force_IRQ != 0) { force_IRQ = 0; @@ -257,13 +281,19 @@ xpc_hb_checker(void *ignore) xpc_hb_check_timeout = jiffies + (xpc_hb_check_interval * HZ); } + + /* wait for IRQ or timeout */ + (void) wait_event_interruptible(xpc_act_IRQ_wq, + (last_IRQ_count < atomic_read(&xpc_act_IRQ_rcvd) || + jiffies >= xpc_hb_check_timeout || + (volatile int) xpc_exiting)); } dev_dbg(xpc_part, "heartbeat checker is exiting\n"); /* mark this thread as inactive */ - up(&xpc_hb_checker_exited); + up(&xpc_hb_checker_inactive); return 0; } @@ -283,7 +313,7 @@ xpc_initiate_discovery(void *ignore) dev_dbg(xpc_part, "discovery thread is exiting\n"); /* mark this thread as inactive */ - up(&xpc_discovery_exited); + up(&xpc_discovery_inactive); return 0; } @@ -309,7 +339,7 @@ xpc_make_first_contact(struct xpc_partition *part) "partition %d\n", XPC_PARTID(part)); /* wait a 1/4 of a second or so */ - msleep_interruptible(250); + (void) msleep_interruptible(250); if (part->act_state == XPC_P_DEACTIVATING) { return part->reason; @@ -336,7 +366,8 @@ static void xpc_channel_mgr(struct xpc_partition *part) { while (part->act_state != XPC_P_DEACTIVATING || - atomic_read(&part->nchannels_active) > 0) { + atomic_read(&part->nchannels_active) > 0 || + !xpc_partition_disengaged(part)) { xpc_process_channel_activity(part); @@ -360,7 +391,8 @@ xpc_channel_mgr(struct xpc_partition *part) (volatile u64) part->local_IPI_amo != 0 || ((volatile u8) part->act_state == XPC_P_DEACTIVATING && - atomic_read(&part->nchannels_active) == 0))); + atomic_read(&part->nchannels_active) == 0 && + xpc_partition_disengaged(part)))); atomic_set(&part->channel_mgr_requests, 1); // >>> Does it need to wakeup periodically as well? In case we @@ -482,7 +514,7 @@ xpc_activating(void *__partid) return 0; } - XPC_ALLOW_HB(partid, xpc_vars); + xpc_allow_hb(partid, xpc_vars); xpc_IPI_send_activated(part); @@ -492,6 +524,7 @@ xpc_activating(void *__partid) */ (void) xpc_partition_up(part); + xpc_disallow_hb(partid, xpc_vars); xpc_mark_partition_inactive(part); if (part->reason == xpcReactivating) { @@ -704,11 +737,14 @@ xpc_daemonize_kthread(void *args) xpc_kthread_waitmsgs(part, ch); } - if (atomic_dec_return(&ch->kthreads_assigned) == 0 && - ((ch->flags & XPC_C_CONNECTCALLOUT) || - (ch->reason != xpcUnregistering && - ch->reason != xpcOtherUnregistering))) { - xpc_disconnected_callout(ch); + if (atomic_dec_return(&ch->kthreads_assigned) == 0) { + if (ch->flags & XPC_C_CONNECTCALLOUT) { + xpc_disconnecting_callout(ch); + } + if (atomic_dec_return(&part->nchannels_engaged) == 0) { + xpc_mark_partition_disengaged(part); + xpc_IPI_send_disengage(part); + } } @@ -740,6 +776,7 @@ xpc_create_kthreads(struct xpc_channel *ch, int needed) unsigned long irq_flags; pid_t pid; u64 args = XPC_PACK_ARGS(ch->partid, ch->number); + struct xpc_partition *part = &xpc_partitions[ch->partid]; while (needed-- > 0) { @@ -770,9 +807,13 @@ xpc_create_kthreads(struct xpc_channel *ch, int needed) * kthread. That kthread is responsible for doing the * counterpart to the following before it exits. */ - (void) xpc_part_ref(&xpc_partitions[ch->partid]); + (void) xpc_part_ref(part); xpc_msgqueue_ref(ch); - atomic_inc(&ch->kthreads_assigned); + if (atomic_inc_return(&ch->kthreads_assigned) == 1) { + if (atomic_inc_return(&part->nchannels_engaged) == 1) { + xpc_mark_partition_engaged(part); + } + } ch->kthreads_created++; // >>> temporary debug only!!! } } @@ -781,6 +822,7 @@ xpc_create_kthreads(struct xpc_channel *ch, int needed) void xpc_disconnect_wait(int ch_number) { + unsigned long irq_flags; partid_t partid; struct xpc_partition *part; struct xpc_channel *ch; @@ -793,10 +835,13 @@ xpc_disconnect_wait(int ch_number) if (xpc_part_ref(part)) { ch = &part->channels[ch_number]; -// >>> how do we keep from falling into the window between our check and going -// >>> down and coming back up where sema is re-inited? - if (ch->flags & XPC_C_SETUP) { - (void) down(&ch->teardown_sema); + if (ch->flags & XPC_C_WDISCONNECT) { + if (!(ch->flags & XPC_C_DISCONNECTED)) { + (void) down(&ch->wdisconnect_sema); + } + spin_lock_irqsave(&ch->lock, irq_flags); + ch->flags &= ~XPC_C_WDISCONNECT; + spin_unlock_irqrestore(&ch->lock, irq_flags); } xpc_part_deref(part); @@ -806,62 +851,89 @@ xpc_disconnect_wait(int ch_number) static void -xpc_do_exit(void) +xpc_do_exit(enum xpc_retval reason) { partid_t partid; int active_part_count; struct xpc_partition *part; + unsigned long printmsg_time; - /* now it's time to eliminate our heartbeat */ - del_timer_sync(&xpc_hb_timer); - xpc_vars->heartbeating_to_mask = 0; - - /* indicate to others that our reserved page is uninitialized */ - xpc_rsvd_page->vars_pa = 0; + /* a 'rmmod XPC' and a 'reboot' cannot both end up here together */ + DBUG_ON(xpc_exiting == 1); /* - * Ignore all incoming interrupts. Without interupts the heartbeat - * checker won't activate any new partitions that may come up. - */ - free_irq(SGI_XPC_ACTIVATE, NULL); - - /* - * Cause the heartbeat checker and the discovery threads to exit. - * We don't want them attempting to activate new partitions as we - * try to deactivate the existing ones. + * Let the heartbeat checker thread and the discovery thread + * (if one is running) know that they should exit. Also wake up + * the heartbeat checker thread in case it's sleeping. */ xpc_exiting = 1; wake_up_interruptible(&xpc_act_IRQ_wq); - /* wait for the heartbeat checker thread to mark itself inactive */ - down(&xpc_hb_checker_exited); + /* ignore all incoming interrupts */ + free_irq(SGI_XPC_ACTIVATE, NULL); /* wait for the discovery thread to mark itself inactive */ - down(&xpc_discovery_exited); + down(&xpc_discovery_inactive); + + /* wait for the heartbeat checker thread to mark itself inactive */ + down(&xpc_hb_checker_inactive); - msleep_interruptible(300); + /* sleep for a 1/3 of a second or so */ + (void) msleep_interruptible(300); /* wait for all partitions to become inactive */ + printmsg_time = jiffies; + do { active_part_count = 0; for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { part = &xpc_partitions[partid]; - if (part->act_state != XPC_P_INACTIVE) { - active_part_count++; - - XPC_DEACTIVATE_PARTITION(part, xpcUnloading); + if (xpc_partition_disengaged(part) && + part->act_state == XPC_P_INACTIVE) { + continue; } + + active_part_count++; + + XPC_DEACTIVATE_PARTITION(part, reason); + } + + if (active_part_count == 0) { + break; + } + + if (jiffies >= printmsg_time) { + dev_info(xpc_part, "waiting for partitions to " + "deactivate/disengage, active count=%d, remote " + "engaged=0x%lx\n", active_part_count, + xpc_partition_engaged(1UL << partid)); + + printmsg_time = jiffies + + (XPC_DISENGAGE_PRINTMSG_INTERVAL * HZ); } - if (active_part_count) - msleep_interruptible(300); - } while (active_part_count > 0); + /* sleep for a 1/3 of a second or so */ + (void) msleep_interruptible(300); + + } while (1); + + DBUG_ON(xpc_partition_engaged(-1UL)); + + + /* indicate to others that our reserved page is uninitialized */ + xpc_rsvd_page->vars_pa = 0; + + /* now it's time to eliminate our heartbeat */ + del_timer_sync(&xpc_hb_timer); + DBUG_ON(xpc_vars->heartbeating_to_mask == 0); + /* take ourselves off of the reboot_notifier_list */ + (void) unregister_reboot_notifier(&xpc_reboot_notifier); /* close down protections for IPI operations */ xpc_restrict_IPI_ops(); @@ -876,6 +948,34 @@ xpc_do_exit(void) } +/* + * This function is called when the system is being rebooted. + */ +static int +xpc_system_reboot(struct notifier_block *nb, unsigned long event, void *unused) +{ + enum xpc_retval reason; + + + switch (event) { + case SYS_RESTART: + reason = xpcSystemReboot; + break; + case SYS_HALT: + reason = xpcSystemHalt; + break; + case SYS_POWER_OFF: + reason = xpcSystemPoweroff; + break; + default: + reason = xpcSystemGoingDown; + } + + xpc_do_exit(reason); + return NOTIFY_DONE; +} + + int __init xpc_init(void) { @@ -920,6 +1020,12 @@ xpc_init(void) spin_lock_init(&part->act_lock); part->act_state = XPC_P_INACTIVE; XPC_SET_REASON(part, 0, 0); + + init_timer(&part->disengage_request_timer); + part->disengage_request_timer.function = + xpc_timeout_partition_disengage_request; + part->disengage_request_timer.data = (unsigned long) part; + part->setup_state = XPC_P_UNSET; init_waitqueue_head(&part->teardown_wq); atomic_set(&part->references, 0); @@ -976,6 +1082,13 @@ xpc_init(void) } + /* add ourselves to the reboot_notifier_list */ + ret = register_reboot_notifier(&xpc_reboot_notifier); + if (ret != 0) { + dev_warn(xpc_part, "can't register reboot notifier\n"); + } + + /* * Set the beating to other partitions into motion. This is * the last requirement for other partitions' discovery to @@ -997,6 +1110,9 @@ xpc_init(void) /* indicate to others that our reserved page is uninitialized */ xpc_rsvd_page->vars_pa = 0; + /* take ourselves off of the reboot_notifier_list */ + (void) unregister_reboot_notifier(&xpc_reboot_notifier); + del_timer_sync(&xpc_hb_timer); free_irq(SGI_XPC_ACTIVATE, NULL); xpc_restrict_IPI_ops(); @@ -1018,9 +1134,9 @@ xpc_init(void) dev_err(xpc_part, "failed while forking discovery thread\n"); /* mark this new thread as a non-starter */ - up(&xpc_discovery_exited); + up(&xpc_discovery_inactive); - xpc_do_exit(); + xpc_do_exit(xpcUnloading); return -EBUSY; } @@ -1039,7 +1155,7 @@ module_init(xpc_init); void __exit xpc_exit(void) { - xpc_do_exit(); + xpc_do_exit(xpcUnloading); } module_exit(xpc_exit); diff --git a/arch/ia64/sn/kernel/xpc_partition.c b/arch/ia64/sn/kernel/xpc_partition.c index 578265ea9e67..79a0fc4c860c 100644 --- a/arch/ia64/sn/kernel/xpc_partition.c +++ b/arch/ia64/sn/kernel/xpc_partition.c @@ -76,11 +76,6 @@ char ____cacheline_aligned xpc_remote_copy_buffer[XPC_RSVD_PAGE_ALIGNED_SIZE]; -/* systune related variables */ -int xpc_hb_interval = XPC_HB_DEFAULT_INTERVAL; -int xpc_hb_check_interval = XPC_HB_CHECK_DEFAULT_TIMEOUT; - - /* * Given a nasid, get the physical address of the partition's reserved page * for that nasid. This function returns 0 on any error. @@ -239,16 +234,21 @@ xpc_rsvd_page_init(void) xpc_vars->amos_page = amos_page; /* save for next load of XPC */ - /* - * Initialize the activation related AMO variables. - */ - xpc_vars->act_amos = xpc_IPI_init(XP_MAX_PARTITIONS); - for (i = 1; i < XP_NASID_MASK_WORDS; i++) { - xpc_IPI_init(i + XP_MAX_PARTITIONS); + /* initialize the activate IRQ related AMO variables */ + for (i = 0; i < XP_NASID_MASK_WORDS; i++) { + (void) xpc_IPI_init(XPC_ACTIVATE_IRQ_AMOS + i); } + + /* initialize the engaged remote partitions related AMO variables */ + (void) xpc_IPI_init(XPC_ENGAGED_PARTITIONS_AMO); + (void) xpc_IPI_init(XPC_DISENGAGE_REQUEST_AMO); + /* export AMO page's physical address to other partitions */ xpc_vars->amos_page_pa = ia64_tpa((u64) xpc_vars->amos_page); + /* timestamp of when reserved page was initialized */ + rp->stamp = CURRENT_TIME; + /* * This signifies to the remote partition that our reserved * page is initialized. @@ -387,6 +387,11 @@ xpc_check_remote_hb(void) remote_vars = (struct xpc_vars *) xpc_remote_copy_buffer; for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { + + if (xpc_exiting) { + break; + } + if (partid == sn_partition_id) { continue; } @@ -417,7 +422,7 @@ xpc_check_remote_hb(void) if (((remote_vars->heartbeat == part->last_heartbeat) && (remote_vars->kdb_status == 0)) || - !XPC_HB_ALLOWED(sn_partition_id, remote_vars)) { + !xpc_hb_allowed(sn_partition_id, remote_vars)) { XPC_DEACTIVATE_PARTITION(part, xpcNoHeartbeat); continue; @@ -436,23 +441,23 @@ xpc_check_remote_hb(void) */ static enum xpc_retval xpc_get_remote_rp(int nasid, u64 *discovered_nasids, - struct xpc_rsvd_page *remote_rp, u64 *remote_rsvd_page_pa) + struct xpc_rsvd_page *remote_rp, u64 *remote_rp_pa) { int bres, i; /* get the reserved page's physical address */ - *remote_rsvd_page_pa = xpc_get_rsvd_page_pa(nasid, (u64) remote_rp, + *remote_rp_pa = xpc_get_rsvd_page_pa(nasid, (u64) remote_rp, XPC_RSVD_PAGE_ALIGNED_SIZE); - if (*remote_rsvd_page_pa == 0) { + if (*remote_rp_pa == 0) { return xpcNoRsvdPageAddr; } /* pull over the reserved page structure */ - bres = xp_bte_copy(*remote_rsvd_page_pa, ia64_tpa((u64) remote_rp), + bres = xp_bte_copy(*remote_rp_pa, ia64_tpa((u64) remote_rp), XPC_RSVD_PAGE_ALIGNED_SIZE, (BTE_NOTIFY | BTE_WACQUIRE), NULL); if (bres != BTE_SUCCESS) { @@ -523,6 +528,55 @@ xpc_get_remote_vars(u64 remote_vars_pa, struct xpc_vars *remote_vars) } +/* + * Update the remote partition's info. + */ +static void +xpc_update_partition_info(struct xpc_partition *part, u8 remote_rp_version, + struct timespec *remote_rp_stamp, u64 remote_rp_pa, + u64 remote_vars_pa, struct xpc_vars *remote_vars) +{ + part->remote_rp_version = remote_rp_version; + dev_dbg(xpc_part, " remote_rp_version = 0x%016lx\n", + part->remote_rp_version); + + part->remote_rp_stamp = *remote_rp_stamp; + dev_dbg(xpc_part, " remote_rp_stamp (tv_sec = 0x%lx tv_nsec = 0x%lx\n", + part->remote_rp_stamp.tv_sec, part->remote_rp_stamp.tv_nsec); + + part->remote_rp_pa = remote_rp_pa; + dev_dbg(xpc_part, " remote_rp_pa = 0x%016lx\n", part->remote_rp_pa); + + part->remote_vars_pa = remote_vars_pa; + dev_dbg(xpc_part, " remote_vars_pa = 0x%016lx\n", + part->remote_vars_pa); + + part->last_heartbeat = remote_vars->heartbeat; + dev_dbg(xpc_part, " last_heartbeat = 0x%016lx\n", + part->last_heartbeat); + + part->remote_vars_part_pa = remote_vars->vars_part_pa; + dev_dbg(xpc_part, " remote_vars_part_pa = 0x%016lx\n", + part->remote_vars_part_pa); + + part->remote_act_nasid = remote_vars->act_nasid; + dev_dbg(xpc_part, " remote_act_nasid = 0x%x\n", + part->remote_act_nasid); + + part->remote_act_phys_cpuid = remote_vars->act_phys_cpuid; + dev_dbg(xpc_part, " remote_act_phys_cpuid = 0x%x\n", + part->remote_act_phys_cpuid); + + part->remote_amos_page_pa = remote_vars->amos_page_pa; + dev_dbg(xpc_part, " remote_amos_page_pa = 0x%lx\n", + part->remote_amos_page_pa); + + part->remote_vars_version = remote_vars->version; + dev_dbg(xpc_part, " remote_vars_version = 0x%x\n", + part->remote_vars_version); +} + + /* * Prior code has determine the nasid which generated an IPI. Inspect * that nasid to determine if its partition needs to be activated or @@ -542,8 +596,12 @@ xpc_identify_act_IRQ_req(int nasid) { struct xpc_rsvd_page *remote_rp; struct xpc_vars *remote_vars; - u64 remote_rsvd_page_pa; + u64 remote_rp_pa; u64 remote_vars_pa; + int remote_rp_version; + int reactivate = 0; + int stamp_diff; + struct timespec remote_rp_stamp = { 0, 0 }; partid_t partid; struct xpc_partition *part; enum xpc_retval ret; @@ -553,7 +611,7 @@ xpc_identify_act_IRQ_req(int nasid) remote_rp = (struct xpc_rsvd_page *) xpc_remote_copy_buffer; - ret = xpc_get_remote_rp(nasid, NULL, remote_rp, &remote_rsvd_page_pa); + ret = xpc_get_remote_rp(nasid, NULL, remote_rp, &remote_rp_pa); if (ret != xpcSuccess) { dev_warn(xpc_part, "unable to get reserved page from nasid %d, " "which sent interrupt, reason=%d\n", nasid, ret); @@ -561,6 +619,10 @@ xpc_identify_act_IRQ_req(int nasid) } remote_vars_pa = remote_rp->vars_pa; + remote_rp_version = remote_rp->version; + if (XPC_SUPPORTS_RP_STAMP(remote_rp_version)) { + remote_rp_stamp = remote_rp->stamp; + } partid = remote_rp->partid; part = &xpc_partitions[partid]; @@ -586,44 +648,117 @@ xpc_identify_act_IRQ_req(int nasid) "%ld:0x%lx\n", (int) nasid, (int) partid, part->act_IRQ_rcvd, remote_vars->heartbeat, remote_vars->heartbeating_to_mask); + if (xpc_partition_disengaged(part) && + part->act_state == XPC_P_INACTIVE) { - if (part->act_state == XPC_P_INACTIVE) { + xpc_update_partition_info(part, remote_rp_version, + &remote_rp_stamp, remote_rp_pa, + remote_vars_pa, remote_vars); - part->remote_rp_pa = remote_rsvd_page_pa; - dev_dbg(xpc_part, " remote_rp_pa = 0x%016lx\n", - part->remote_rp_pa); + if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) { + if (xpc_partition_disengage_requested(1UL << partid)) { + /* + * Other side is waiting on us to disengage, + * even though we already have. + */ + return; + } + } else { + /* other side doesn't support disengage requests */ + xpc_clear_partition_disengage_request(1UL << partid); + } - part->remote_vars_pa = remote_vars_pa; - dev_dbg(xpc_part, " remote_vars_pa = 0x%016lx\n", - part->remote_vars_pa); + xpc_activate_partition(part); + return; + } - part->last_heartbeat = remote_vars->heartbeat; - dev_dbg(xpc_part, " last_heartbeat = 0x%016lx\n", - part->last_heartbeat); + DBUG_ON(part->remote_rp_version == 0); + DBUG_ON(part->remote_vars_version == 0); + + if (!XPC_SUPPORTS_RP_STAMP(part->remote_rp_version)) { + DBUG_ON(XPC_SUPPORTS_DISENGAGE_REQUEST(part-> + remote_vars_version)); + + if (!XPC_SUPPORTS_RP_STAMP(remote_rp_version)) { + DBUG_ON(XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars-> + version)); + /* see if the other side rebooted */ + if (part->remote_amos_page_pa == + remote_vars->amos_page_pa && + xpc_hb_allowed(sn_partition_id, + remote_vars)) { + /* doesn't look that way, so ignore the IPI */ + return; + } + } - part->remote_vars_part_pa = remote_vars->vars_part_pa; - dev_dbg(xpc_part, " remote_vars_part_pa = 0x%016lx\n", - part->remote_vars_part_pa); + /* + * Other side rebooted and previous XPC didn't support the + * disengage request, so we don't need to do anything special. + */ - part->remote_act_nasid = remote_vars->act_nasid; - dev_dbg(xpc_part, " remote_act_nasid = 0x%x\n", - part->remote_act_nasid); + xpc_update_partition_info(part, remote_rp_version, + &remote_rp_stamp, remote_rp_pa, + remote_vars_pa, remote_vars); + part->reactivate_nasid = nasid; + XPC_DEACTIVATE_PARTITION(part, xpcReactivating); + return; + } - part->remote_act_phys_cpuid = remote_vars->act_phys_cpuid; - dev_dbg(xpc_part, " remote_act_phys_cpuid = 0x%x\n", - part->remote_act_phys_cpuid); + DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)); - part->remote_amos_page_pa = remote_vars->amos_page_pa; - dev_dbg(xpc_part, " remote_amos_page_pa = 0x%lx\n", - part->remote_amos_page_pa); + if (!XPC_SUPPORTS_RP_STAMP(remote_rp_version)) { + DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->version)); - xpc_activate_partition(part); + /* + * Other side rebooted and previous XPC did support the + * disengage request, but the new one doesn't. + */ - } else if (part->remote_amos_page_pa != remote_vars->amos_page_pa || - !XPC_HB_ALLOWED(sn_partition_id, remote_vars)) { + xpc_clear_partition_engaged(1UL << partid); + xpc_clear_partition_disengage_request(1UL << partid); + xpc_update_partition_info(part, remote_rp_version, + &remote_rp_stamp, remote_rp_pa, + remote_vars_pa, remote_vars); + reactivate = 1; + + } else { + DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->version)); + + stamp_diff = xpc_compare_stamps(&part->remote_rp_stamp, + &remote_rp_stamp); + if (stamp_diff != 0) { + DBUG_ON(stamp_diff >= 0); + + /* + * Other side rebooted and the previous XPC did support + * the disengage request, as does the new one. + */ + + DBUG_ON(xpc_partition_engaged(1UL << partid)); + DBUG_ON(xpc_partition_disengage_requested(1UL << + partid)); + + xpc_update_partition_info(part, remote_rp_version, + &remote_rp_stamp, remote_rp_pa, + remote_vars_pa, remote_vars); + reactivate = 1; + } + } + + if (!xpc_partition_disengaged(part)) { + /* still waiting on other side to disengage from us */ + return; + } + + if (reactivate) { part->reactivate_nasid = nasid; XPC_DEACTIVATE_PARTITION(part, xpcReactivating); + + } else if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version) && + xpc_partition_disengage_requested(1UL << partid)) { + XPC_DEACTIVATE_PARTITION(part, xpcOtherGoingDown); } } @@ -646,12 +781,16 @@ xpc_identify_act_IRQ_sender(void) struct xpc_rsvd_page *rp = (struct xpc_rsvd_page *) xpc_rsvd_page; - act_amos = xpc_vars->act_amos; + act_amos = xpc_vars->amos_page + XPC_ACTIVATE_IRQ_AMOS; /* scan through act AMO variable looking for non-zero entries */ for (word = 0; word < XP_NASID_MASK_WORDS; word++) { + if (xpc_exiting) { + break; + } + nasid_mask = xpc_IPI_receive(&act_amos[word]); if (nasid_mask == 0) { /* no IRQs from nasids in this variable */ @@ -687,6 +826,55 @@ xpc_identify_act_IRQ_sender(void) } +/* + * See if the other side has responded to a partition disengage request + * from us. + */ +int +xpc_partition_disengaged(struct xpc_partition *part) +{ + partid_t partid = XPC_PARTID(part); + int disengaged; + + + disengaged = (xpc_partition_engaged(1UL << partid) == 0); + if (part->disengage_request_timeout) { + if (!disengaged) { + if (jiffies < part->disengage_request_timeout) { + /* timelimit hasn't been reached yet */ + return 0; + } + + /* + * Other side hasn't responded to our disengage + * request in a timely fashion, so assume it's dead. + */ + + xpc_clear_partition_engaged(1UL << partid); + disengaged = 1; + } + part->disengage_request_timeout = 0; + + /* cancel the timer function, provided it's not us */ + if (!in_interrupt()) { + del_singleshot_timer_sync(&part-> + disengage_request_timer); + } + + DBUG_ON(part->act_state != XPC_P_DEACTIVATING && + part->act_state != XPC_P_INACTIVE); + if (part->act_state != XPC_P_INACTIVE) { + xpc_wakeup_channel_mgr(part); + } + + if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) { + xpc_cancel_partition_disengage_request(part); + } + } + return disengaged; +} + + /* * Mark specified partition as active. */ @@ -721,7 +909,6 @@ xpc_deactivate_partition(const int line, struct xpc_partition *part, enum xpc_retval reason) { unsigned long irq_flags; - partid_t partid = XPC_PARTID(part); spin_lock_irqsave(&part->act_lock, irq_flags); @@ -749,17 +936,27 @@ xpc_deactivate_partition(const int line, struct xpc_partition *part, spin_unlock_irqrestore(&part->act_lock, irq_flags); - XPC_DISALLOW_HB(partid, xpc_vars); + if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) { + xpc_request_partition_disengage(part); + xpc_IPI_send_disengage(part); + + /* set a timelimit on the disengage request */ + part->disengage_request_timeout = jiffies + + (XPC_DISENGAGE_REQUEST_TIMELIMIT * HZ); + part->disengage_request_timer.expires = + part->disengage_request_timeout; + add_timer(&part->disengage_request_timer); + } dev_dbg(xpc_part, "bringing partition %d down, reason = %d\n", partid, reason); - xpc_partition_down(part, reason); + xpc_partition_going_down(part, reason); } /* - * Mark specified partition as active. + * Mark specified partition as inactive. */ void xpc_mark_partition_inactive(struct xpc_partition *part) @@ -792,7 +989,7 @@ xpc_discovery(void) void *remote_rp_base; struct xpc_rsvd_page *remote_rp; struct xpc_vars *remote_vars; - u64 remote_rsvd_page_pa; + u64 remote_rp_pa; u64 remote_vars_pa; int region; int max_regions; @@ -877,7 +1074,7 @@ xpc_discovery(void) /* pull over the reserved page structure */ ret = xpc_get_remote_rp(nasid, discovered_nasids, - remote_rp, &remote_rsvd_page_pa); + remote_rp, &remote_rp_pa); if (ret != xpcSuccess) { dev_dbg(xpc_part, "unable to get reserved page " "from nasid %d, reason=%d\n", nasid, @@ -948,6 +1145,13 @@ xpc_discovery(void) remote_vars->act_nasid, remote_vars->act_phys_cpuid); + if (XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars-> + version)) { + part->remote_amos_page_pa = + remote_vars->amos_page_pa; + xpc_mark_partition_disengaged(part); + xpc_cancel_partition_disengage_request(part); + } xpc_IPI_send_activate(remote_vars); } } -- cgit v1.2.2 From 5fbcf9a5c6904bd563f584d12d1f4d3f68a19d7d Mon Sep 17 00:00:00 2001 From: Mark Maule Date: Tue, 6 Sep 2005 13:03:51 -0500 Subject: [IA64-SGI] volatile semantics in places where it seems necessary Resend using accessors instead of volatile qualifiers per hch comments, and easier to understand convenience macros per rja comments. Patch to apply volatile semantics when accessing MMR's in various SN files. Signed-off-by: Mark Maule Signed-off-by: Tony Luck --- arch/ia64/sn/pci/pcibr/pcibr_reg.c | 58 ++++++++++++++++++++------------------ arch/ia64/sn/pci/tioca_provider.c | 31 ++++++++++---------- arch/ia64/sn/pci/tioce_provider.c | 29 ++++++++++--------- 3 files changed, 60 insertions(+), 58 deletions(-) (limited to 'arch') diff --git a/arch/ia64/sn/pci/pcibr/pcibr_reg.c b/arch/ia64/sn/pci/pcibr/pcibr_reg.c index 21426d02fbe6..1624b39cb3ec 100644 --- a/arch/ia64/sn/pci/pcibr/pcibr_reg.c +++ b/arch/ia64/sn/pci/pcibr/pcibr_reg.c @@ -29,10 +29,10 @@ void pcireg_control_bit_clr(struct pcibus_info *pcibus_info, uint64_t bits) if (pcibus_info) { switch (pcibus_info->pbi_bridge_type) { case PCIBR_BRIDGETYPE_TIOCP: - ptr->tio.cp_control &= ~bits; + __sn_clrq_relaxed(&ptr->tio.cp_control, bits); break; case PCIBR_BRIDGETYPE_PIC: - ptr->pic.p_wid_control &= ~bits; + __sn_clrq_relaxed(&ptr->pic.p_wid_control, bits); break; default: panic @@ -49,10 +49,10 @@ void pcireg_control_bit_set(struct pcibus_info *pcibus_info, uint64_t bits) if (pcibus_info) { switch (pcibus_info->pbi_bridge_type) { case PCIBR_BRIDGETYPE_TIOCP: - ptr->tio.cp_control |= bits; + __sn_setq_relaxed(&ptr->tio.cp_control, bits); break; case PCIBR_BRIDGETYPE_PIC: - ptr->pic.p_wid_control |= bits; + __sn_setq_relaxed(&ptr->pic.p_wid_control, bits); break; default: panic @@ -73,10 +73,10 @@ uint64_t pcireg_tflush_get(struct pcibus_info *pcibus_info) if (pcibus_info) { switch (pcibus_info->pbi_bridge_type) { case PCIBR_BRIDGETYPE_TIOCP: - ret = ptr->tio.cp_tflush; + ret = __sn_readq_relaxed(&ptr->tio.cp_tflush); break; case PCIBR_BRIDGETYPE_PIC: - ret = ptr->pic.p_wid_tflush; + ret = __sn_readq_relaxed(&ptr->pic.p_wid_tflush); break; default: panic @@ -103,10 +103,10 @@ uint64_t pcireg_intr_status_get(struct pcibus_info * pcibus_info) if (pcibus_info) { switch (pcibus_info->pbi_bridge_type) { case PCIBR_BRIDGETYPE_TIOCP: - ret = ptr->tio.cp_int_status; + ret = __sn_readq_relaxed(&ptr->tio.cp_int_status); break; case PCIBR_BRIDGETYPE_PIC: - ret = ptr->pic.p_int_status; + ret = __sn_readq_relaxed(&ptr->pic.p_int_status); break; default: panic @@ -127,10 +127,10 @@ void pcireg_intr_enable_bit_clr(struct pcibus_info *pcibus_info, uint64_t bits) if (pcibus_info) { switch (pcibus_info->pbi_bridge_type) { case PCIBR_BRIDGETYPE_TIOCP: - ptr->tio.cp_int_enable &= ~bits; + __sn_clrq_relaxed(&ptr->tio.cp_int_enable, bits); break; case PCIBR_BRIDGETYPE_PIC: - ptr->pic.p_int_enable &= ~bits; + __sn_clrq_relaxed(&ptr->pic.p_int_enable, ~bits); break; default: panic @@ -147,10 +147,10 @@ void pcireg_intr_enable_bit_set(struct pcibus_info *pcibus_info, uint64_t bits) if (pcibus_info) { switch (pcibus_info->pbi_bridge_type) { case PCIBR_BRIDGETYPE_TIOCP: - ptr->tio.cp_int_enable |= bits; + __sn_setq_relaxed(&ptr->tio.cp_int_enable, bits); break; case PCIBR_BRIDGETYPE_PIC: - ptr->pic.p_int_enable |= bits; + __sn_setq_relaxed(&ptr->pic.p_int_enable, bits); break; default: panic @@ -171,14 +171,16 @@ void pcireg_intr_addr_addr_set(struct pcibus_info *pcibus_info, int int_n, if (pcibus_info) { switch (pcibus_info->pbi_bridge_type) { case PCIBR_BRIDGETYPE_TIOCP: - ptr->tio.cp_int_addr[int_n] &= ~TIOCP_HOST_INTR_ADDR; - ptr->tio.cp_int_addr[int_n] |= - (addr & TIOCP_HOST_INTR_ADDR); + __sn_clrq_relaxed(&ptr->tio.cp_int_addr[int_n], + TIOCP_HOST_INTR_ADDR); + __sn_setq_relaxed(&ptr->tio.cp_int_addr[int_n], + (addr & TIOCP_HOST_INTR_ADDR)); break; case PCIBR_BRIDGETYPE_PIC: - ptr->pic.p_int_addr[int_n] &= ~PIC_HOST_INTR_ADDR; - ptr->pic.p_int_addr[int_n] |= - (addr & PIC_HOST_INTR_ADDR); + __sn_clrq_relaxed(&ptr->pic.p_int_addr[int_n], + PIC_HOST_INTR_ADDR); + __sn_setq_relaxed(&ptr->pic.p_int_addr[int_n], + (addr & PIC_HOST_INTR_ADDR)); break; default: panic @@ -198,10 +200,10 @@ void pcireg_force_intr_set(struct pcibus_info *pcibus_info, int int_n) if (pcibus_info) { switch (pcibus_info->pbi_bridge_type) { case PCIBR_BRIDGETYPE_TIOCP: - ptr->tio.cp_force_pin[int_n] = 1; + writeq(1, &ptr->tio.cp_force_pin[int_n]); break; case PCIBR_BRIDGETYPE_PIC: - ptr->pic.p_force_pin[int_n] = 1; + writeq(1, &ptr->pic.p_force_pin[int_n]); break; default: panic @@ -222,10 +224,12 @@ uint64_t pcireg_wrb_flush_get(struct pcibus_info *pcibus_info, int device) if (pcibus_info) { switch (pcibus_info->pbi_bridge_type) { case PCIBR_BRIDGETYPE_TIOCP: - ret = ptr->tio.cp_wr_req_buf[device]; + ret = + __sn_readq_relaxed(&ptr->tio.cp_wr_req_buf[device]); break; case PCIBR_BRIDGETYPE_PIC: - ret = ptr->pic.p_wr_req_buf[device]; + ret = + __sn_readq_relaxed(&ptr->pic.p_wr_req_buf[device]); break; default: panic("pcireg_wrb_flush_get: unknown bridgetype bridge 0x%p", (void *)ptr); @@ -244,10 +248,10 @@ void pcireg_int_ate_set(struct pcibus_info *pcibus_info, int ate_index, if (pcibus_info) { switch (pcibus_info->pbi_bridge_type) { case PCIBR_BRIDGETYPE_TIOCP: - ptr->tio.cp_int_ate_ram[ate_index] = (uint64_t) val; + writeq(val, &ptr->tio.cp_int_ate_ram[ate_index]); break; case PCIBR_BRIDGETYPE_PIC: - ptr->pic.p_int_ate_ram[ate_index] = (uint64_t) val; + writeq(val, &ptr->pic.p_int_ate_ram[ate_index]); break; default: panic @@ -265,12 +269,10 @@ uint64_t *pcireg_int_ate_addr(struct pcibus_info *pcibus_info, int ate_index) if (pcibus_info) { switch (pcibus_info->pbi_bridge_type) { case PCIBR_BRIDGETYPE_TIOCP: - ret = - (uint64_t *) & (ptr->tio.cp_int_ate_ram[ate_index]); + ret = &ptr->tio.cp_int_ate_ram[ate_index]; break; case PCIBR_BRIDGETYPE_PIC: - ret = - (uint64_t *) & (ptr->pic.p_int_ate_ram[ate_index]); + ret = &ptr->pic.p_int_ate_ram[ate_index]; break; default: panic diff --git a/arch/ia64/sn/pci/tioca_provider.c b/arch/ia64/sn/pci/tioca_provider.c index ea09c12f0258..eaae2472d6b4 100644 --- a/arch/ia64/sn/pci/tioca_provider.c +++ b/arch/ia64/sn/pci/tioca_provider.c @@ -37,7 +37,7 @@ tioca_gart_init(struct tioca_kernel *tioca_kern) uint64_t offset; struct page *tmp; struct tioca_common *tioca_common; - volatile struct tioca *ca_base; + struct tioca *ca_base; tioca_common = tioca_kern->ca_common; ca_base = (struct tioca *)tioca_common->ca_common.bs_base; @@ -174,27 +174,29 @@ tioca_gart_init(struct tioca_kernel *tioca_kern) * DISABLE GART PREFETCHING due to hw bug tracked in SGI PV930029 */ - ca_base->ca_control1 |= CA_AGPDMA_OP_ENB_COMBDELAY; /* PV895469 ? */ - ca_base->ca_control2 &= ~(CA_GART_MEM_PARAM); - ca_base->ca_control2 |= (0x2ull << CA_GART_MEM_PARAM_SHFT); + __sn_setq_relaxed(&ca_base->ca_control1, + CA_AGPDMA_OP_ENB_COMBDELAY); /* PV895469 ? */ + __sn_clrq_relaxed(&ca_base->ca_control2, CA_GART_MEM_PARAM); + __sn_setq_relaxed(&ca_base->ca_control2, + (0x2ull << CA_GART_MEM_PARAM_SHFT)); tioca_kern->ca_gart_iscoherent = 1; - ca_base->ca_control2 &= - ~(CA_GART_WR_PREFETCH_ENB | CA_GART_RD_PREFETCH_ENB); + __sn_clrq_relaxed(&ca_base->ca_control2, + (CA_GART_WR_PREFETCH_ENB | CA_GART_RD_PREFETCH_ENB)); /* * Unmask GART fetch error interrupts. Clear residual errors first. */ - ca_base->ca_int_status_alias = CA_GART_FETCH_ERR; - ca_base->ca_mult_error_alias = CA_GART_FETCH_ERR; - ca_base->ca_int_mask &= ~CA_GART_FETCH_ERR; + writeq(CA_GART_FETCH_ERR, &ca_base->ca_int_status_alias); + writeq(CA_GART_FETCH_ERR, &ca_base->ca_mult_error_alias); + __sn_clrq_relaxed(&ca_base->ca_int_mask, CA_GART_FETCH_ERR); /* * Program the aperature and gart registers in TIOCA */ - ca_base->ca_gart_aperature = ap_reg; - ca_base->ca_gart_ptr_table = tioca_kern->ca_gart_coretalk_addr | 1; + writeq(ap_reg, &ca_base->ca_gart_aperature); + writeq(tioca_kern->ca_gart_coretalk_addr|1, &ca_base->ca_gart_ptr_table); return 0; } @@ -211,7 +213,6 @@ void tioca_fastwrite_enable(struct tioca_kernel *tioca_kern) { int cap_ptr; - uint64_t ca_control1; uint32_t reg; struct tioca *tioca_base; struct pci_dev *pdev; @@ -256,9 +257,7 @@ tioca_fastwrite_enable(struct tioca_kernel *tioca_kern) */ tioca_base = (struct tioca *)common->ca_common.bs_base; - ca_control1 = tioca_base->ca_control1; - ca_control1 |= CA_AGP_FW_ENABLE; - tioca_base->ca_control1 = ca_control1; + __sn_setq_relaxed(&tioca_base->ca_control1, CA_AGP_FW_ENABLE); } EXPORT_SYMBOL(tioca_fastwrite_enable); /* used by agp-sgi */ @@ -345,7 +344,7 @@ tioca_dma_d48(struct pci_dev *pdev, uint64_t paddr) return 0; } - agp_dma_extn = ca_base->ca_agp_dma_addr_extn; + agp_dma_extn = __sn_readq_relaxed(&ca_base->ca_agp_dma_addr_extn); if (node_upper != (agp_dma_extn >> CA_AGP_DMA_NODE_ID_SHFT)) { printk(KERN_ERR "%s: coretalk upper node (%u) " "mismatch with ca_agp_dma_addr_extn (%lu)\n", diff --git a/arch/ia64/sn/pci/tioce_provider.c b/arch/ia64/sn/pci/tioce_provider.c index 8e75db2b825d..204826c2fa44 100644 --- a/arch/ia64/sn/pci/tioce_provider.c +++ b/arch/ia64/sn/pci/tioce_provider.c @@ -227,7 +227,7 @@ tioce_alloc_map(struct tioce_kernel *ce_kern, int type, int port, ate = ATE_MAKE(addr, pagesize); ate_shadow[i + j] = ate; - ate_reg[i + j] = ate; + writeq(ate, &ate_reg[i + j]); addr += pagesize; } @@ -268,10 +268,10 @@ tioce_dma_d32(struct pci_dev *pdev, uint64_t ct_addr) pcidev_to_tioce(pdev, &ce_mmr, &ce_kern, &port); if (ce_kern->ce_port[port].dirmap_refcnt == 0) { - volatile uint64_t tmp; + uint64_t tmp; ce_kern->ce_port[port].dirmap_shadow = ct_upper; - ce_mmr->ce_ure_dir_map[port] = ct_upper; + writeq(ct_upper, &ce_mmr->ce_ure_dir_map[port]); tmp = ce_mmr->ce_ure_dir_map[port]; dma_ok = 1; } else @@ -343,7 +343,7 @@ tioce_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir) if (TIOCE_D32_ADDR(bus_addr)) { if (--ce_kern->ce_port[port].dirmap_refcnt == 0) { ce_kern->ce_port[port].dirmap_shadow = 0; - ce_mmr->ce_ure_dir_map[port] = 0; + writeq(0, &ce_mmr->ce_ure_dir_map[port]); } } else { struct tioce_dmamap *map; @@ -582,18 +582,18 @@ tioce_kern_init(struct tioce_common *tioce_common) */ tioce_mmr = (struct tioce *)tioce_common->ce_pcibus.bs_base; - tioce_mmr->ce_ure_page_map &= ~CE_URE_PAGESIZE_MASK; - tioce_mmr->ce_ure_page_map |= CE_URE_256K_PAGESIZE; + __sn_clrq_relaxed(&tioce_mmr->ce_ure_page_map, CE_URE_PAGESIZE_MASK); + __sn_setq_relaxed(&tioce_mmr->ce_ure_page_map, CE_URE_256K_PAGESIZE); tioce_kern->ce_ate3240_pagesize = KB(256); for (i = 0; i < TIOCE_NUM_M40_ATES; i++) { tioce_kern->ce_ate40_shadow[i] = 0; - tioce_mmr->ce_ure_ate40[i] = 0; + writeq(0, &tioce_mmr->ce_ure_ate40[i]); } for (i = 0; i < TIOCE_NUM_M3240_ATES; i++) { tioce_kern->ce_ate3240_shadow[i] = 0; - tioce_mmr->ce_ure_ate3240[i] = 0; + writeq(0, &tioce_mmr->ce_ure_ate3240[i]); } return tioce_kern; @@ -665,7 +665,7 @@ tioce_force_interrupt(struct sn_irq_info *sn_irq_info) default: return; } - ce_mmr->ce_adm_force_int = force_int_val; + writeq(force_int_val, &ce_mmr->ce_adm_force_int); } /** @@ -686,6 +686,7 @@ tioce_target_interrupt(struct sn_irq_info *sn_irq_info) struct tioce_common *ce_common; struct tioce *ce_mmr; int bit; + uint64_t vector; pcidev_info = (struct pcidev_info *)sn_irq_info->irq_pciioinfo; if (!pcidev_info) @@ -696,11 +697,11 @@ tioce_target_interrupt(struct sn_irq_info *sn_irq_info) bit = sn_irq_info->irq_int_bit; - ce_mmr->ce_adm_int_mask |= (1UL << bit); - ce_mmr->ce_adm_int_dest[bit] = - ((uint64_t)sn_irq_info->irq_irq << INTR_VECTOR_SHFT) | - sn_irq_info->irq_xtalkaddr; - ce_mmr->ce_adm_int_mask &= ~(1UL << bit); + __sn_setq_relaxed(&ce_mmr->ce_adm_int_mask, (1UL << bit)); + vector = (uint64_t)sn_irq_info->irq_irq << INTR_VECTOR_SHFT; + vector |= sn_irq_info->irq_xtalkaddr; + writeq(vector, &ce_mmr->ce_adm_int_dest[bit]); + __sn_clrq_relaxed(&ce_mmr->ce_adm_int_mask, (1UL << bit)); tioce_force_interrupt(sn_irq_info); } -- cgit v1.2.2 From d8c97d5f3aa348272df2ccb4e224b1cf9a1eb6d7 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Thu, 8 Sep 2005 12:39:59 -0700 Subject: [IA64] simplified efi memory map parsing New version leaves the original memory map unmodified. Also saves any granule trimmings for use by the uncached memory allocator. Inspired by Khalid Aziz (various traces of his patch still remain). Fixes to uncached_build_memmap() and sn2 testing by Martin Hicks. Signed-off-by: Tony Luck --- arch/ia64/kernel/efi.c | 423 +++++++++++++++++++++++++------------------- arch/ia64/kernel/setup.c | 3 + arch/ia64/kernel/uncached.c | 17 +- 3 files changed, 251 insertions(+), 192 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c index 179f230816ed..1291db581721 100644 --- a/arch/ia64/kernel/efi.c +++ b/arch/ia64/kernel/efi.c @@ -239,57 +239,30 @@ is_available_memory (efi_memory_desc_t *md) return 0; } -/* - * Trim descriptor MD so its starts at address START_ADDR. If the descriptor covers - * memory that is normally available to the kernel, issue a warning that some memory - * is being ignored. - */ -static void -trim_bottom (efi_memory_desc_t *md, u64 start_addr) -{ - u64 num_skipped_pages; - - if (md->phys_addr >= start_addr || !md->num_pages) - return; - - num_skipped_pages = (start_addr - md->phys_addr) >> EFI_PAGE_SHIFT; - if (num_skipped_pages > md->num_pages) - num_skipped_pages = md->num_pages; +typedef struct kern_memdesc { + u64 attribute; + u64 start; + u64 num_pages; +} kern_memdesc_t; - if (is_available_memory(md)) - printk(KERN_NOTICE "efi.%s: ignoring %luKB of memory at 0x%lx due to granule hole " - "at 0x%lx\n", __FUNCTION__, - (num_skipped_pages << EFI_PAGE_SHIFT) >> 10, - md->phys_addr, start_addr - IA64_GRANULE_SIZE); - /* - * NOTE: Don't set md->phys_addr to START_ADDR because that could cause the memory - * descriptor list to become unsorted. In such a case, md->num_pages will be - * zero, so the Right Thing will happen. - */ - md->phys_addr += num_skipped_pages << EFI_PAGE_SHIFT; - md->num_pages -= num_skipped_pages; -} +static kern_memdesc_t *kern_memmap; static void -trim_top (efi_memory_desc_t *md, u64 end_addr) +walk (efi_freemem_callback_t callback, void *arg, u64 attr) { - u64 num_dropped_pages, md_end_addr; + kern_memdesc_t *k; + u64 start, end, voff; - md_end_addr = md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT); - - if (md_end_addr <= end_addr || !md->num_pages) - return; - - num_dropped_pages = (md_end_addr - end_addr) >> EFI_PAGE_SHIFT; - if (num_dropped_pages > md->num_pages) - num_dropped_pages = md->num_pages; - - if (is_available_memory(md)) - printk(KERN_NOTICE "efi.%s: ignoring %luKB of memory at 0x%lx due to granule hole " - "at 0x%lx\n", __FUNCTION__, - (num_dropped_pages << EFI_PAGE_SHIFT) >> 10, - md->phys_addr, end_addr); - md->num_pages -= num_dropped_pages; + voff = (attr == EFI_MEMORY_WB) ? PAGE_OFFSET : __IA64_UNCACHED_OFFSET; + for (k = kern_memmap; k->start != ~0UL; k++) { + if (k->attribute != attr) + continue; + start = PAGE_ALIGN(k->start); + end = (k->start + (k->num_pages << EFI_PAGE_SHIFT)) & PAGE_MASK; + if (start < end) + if ((*callback)(start + voff, end + voff, arg) < 0) + return; + } } /* @@ -299,148 +272,19 @@ trim_top (efi_memory_desc_t *md, u64 end_addr) void efi_memmap_walk (efi_freemem_callback_t callback, void *arg) { - int prev_valid = 0; - struct range { - u64 start; - u64 end; - } prev, curr; - void *efi_map_start, *efi_map_end, *p, *q; - efi_memory_desc_t *md, *check_md; - u64 efi_desc_size, start, end, granule_addr, last_granule_addr, first_non_wb_addr = 0; - unsigned long total_mem = 0; - - efi_map_start = __va(ia64_boot_param->efi_memmap); - efi_map_end = efi_map_start + ia64_boot_param->efi_memmap_size; - efi_desc_size = ia64_boot_param->efi_memdesc_size; - - for (p = efi_map_start; p < efi_map_end; p += efi_desc_size) { - md = p; - - /* skip over non-WB memory descriptors; that's all we're interested in... */ - if (!(md->attribute & EFI_MEMORY_WB)) - continue; - - /* - * granule_addr is the base of md's first granule. - * [granule_addr - first_non_wb_addr) is guaranteed to - * be contiguous WB memory. - */ - granule_addr = GRANULEROUNDDOWN(md->phys_addr); - first_non_wb_addr = max(first_non_wb_addr, granule_addr); - - if (first_non_wb_addr < md->phys_addr) { - trim_bottom(md, granule_addr + IA64_GRANULE_SIZE); - granule_addr = GRANULEROUNDDOWN(md->phys_addr); - first_non_wb_addr = max(first_non_wb_addr, granule_addr); - } - - for (q = p; q < efi_map_end; q += efi_desc_size) { - check_md = q; - - if ((check_md->attribute & EFI_MEMORY_WB) && - (check_md->phys_addr == first_non_wb_addr)) - first_non_wb_addr += check_md->num_pages << EFI_PAGE_SHIFT; - else - break; /* non-WB or hole */ - } - - last_granule_addr = GRANULEROUNDDOWN(first_non_wb_addr); - if (last_granule_addr < md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT)) - trim_top(md, last_granule_addr); - - if (is_available_memory(md)) { - if (md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT) >= max_addr) { - if (md->phys_addr >= max_addr) - continue; - md->num_pages = (max_addr - md->phys_addr) >> EFI_PAGE_SHIFT; - first_non_wb_addr = max_addr; - } - - if (total_mem >= mem_limit) - continue; - - if (total_mem + (md->num_pages << EFI_PAGE_SHIFT) > mem_limit) { - unsigned long limit_addr = md->phys_addr; - - limit_addr += mem_limit - total_mem; - limit_addr = GRANULEROUNDDOWN(limit_addr); - - if (md->phys_addr > limit_addr) - continue; - - md->num_pages = (limit_addr - md->phys_addr) >> - EFI_PAGE_SHIFT; - first_non_wb_addr = max_addr = md->phys_addr + - (md->num_pages << EFI_PAGE_SHIFT); - } - total_mem += (md->num_pages << EFI_PAGE_SHIFT); - - if (md->num_pages == 0) - continue; - - curr.start = PAGE_OFFSET + md->phys_addr; - curr.end = curr.start + (md->num_pages << EFI_PAGE_SHIFT); - - if (!prev_valid) { - prev = curr; - prev_valid = 1; - } else { - if (curr.start < prev.start) - printk(KERN_ERR "Oops: EFI memory table not ordered!\n"); - - if (prev.end == curr.start) { - /* merge two consecutive memory ranges */ - prev.end = curr.end; - } else { - start = PAGE_ALIGN(prev.start); - end = prev.end & PAGE_MASK; - if ((end > start) && (*callback)(start, end, arg) < 0) - return; - prev = curr; - } - } - } - } - if (prev_valid) { - start = PAGE_ALIGN(prev.start); - end = prev.end & PAGE_MASK; - if (end > start) - (*callback)(start, end, arg); - } + walk(callback, arg, EFI_MEMORY_WB); } /* - * Walk the EFI memory map to pull out leftover pages in the lower - * memory regions which do not end up in the regular memory map and - * stick them into the uncached allocator - * - * The regular walk function is significantly more complex than the - * uncached walk which means it really doesn't make sense to try and - * marge the two. + * Walks the EFI memory map and calls CALLBACK once for each EFI memory descriptor that + * has memory that is available for uncached allocator. */ -void __init -efi_memmap_walk_uc (efi_freemem_callback_t callback) +void +efi_memmap_walk_uc (efi_freemem_callback_t callback, void *arg) { - void *efi_map_start, *efi_map_end, *p; - efi_memory_desc_t *md; - u64 efi_desc_size, start, end; - - efi_map_start = __va(ia64_boot_param->efi_memmap); - efi_map_end = efi_map_start + ia64_boot_param->efi_memmap_size; - efi_desc_size = ia64_boot_param->efi_memdesc_size; - - for (p = efi_map_start; p < efi_map_end; p += efi_desc_size) { - md = p; - if (md->attribute == EFI_MEMORY_UC) { - start = PAGE_ALIGN(md->phys_addr); - end = PAGE_ALIGN((md->phys_addr+(md->num_pages << EFI_PAGE_SHIFT)) & PAGE_MASK); - if ((*callback)(start, end, NULL) < 0) - return; - } - } + walk(callback, arg, EFI_MEMORY_UC); } - /* * Look for the PAL_CODE region reported by EFI and maps it using an * ITR to enable safe PAL calls in virtual mode. See IA-64 Processor @@ -862,3 +706,220 @@ efi_uart_console_only(void) printk(KERN_ERR "Malformed %s value\n", name); return 0; } + +#define efi_md_size(md) (md->num_pages << EFI_PAGE_SHIFT) + +static inline u64 +kmd_end(kern_memdesc_t *kmd) +{ + return (kmd->start + (kmd->num_pages << EFI_PAGE_SHIFT)); +} + +static inline u64 +efi_md_end(efi_memory_desc_t *md) +{ + return (md->phys_addr + efi_md_size(md)); +} + +static inline int +efi_wb(efi_memory_desc_t *md) +{ + return (md->attribute & EFI_MEMORY_WB); +} + +static inline int +efi_uc(efi_memory_desc_t *md) +{ + return (md->attribute & EFI_MEMORY_UC); +} + +/* + * Look for the first granule aligned memory descriptor memory + * that is big enough to hold EFI memory map. Make sure this + * descriptor is atleast granule sized so it does not get trimmed + */ +struct kern_memdesc * +find_memmap_space (void) +{ + u64 contig_low=0, contig_high=0; + u64 as = 0, ae; + void *efi_map_start, *efi_map_end, *p, *q; + efi_memory_desc_t *md, *pmd = NULL, *check_md; + u64 space_needed, efi_desc_size; + unsigned long total_mem = 0; + + efi_map_start = __va(ia64_boot_param->efi_memmap); + efi_map_end = efi_map_start + ia64_boot_param->efi_memmap_size; + efi_desc_size = ia64_boot_param->efi_memdesc_size; + + /* + * Worst case: we need 3 kernel descriptors for each efi descriptor + * (if every entry has a WB part in the middle, and UC head and tail), + * plus one for the end marker. + */ + space_needed = sizeof(kern_memdesc_t) * + (3 * (ia64_boot_param->efi_memmap_size/efi_desc_size) + 1); + + for (p = efi_map_start; p < efi_map_end; pmd = md, p += efi_desc_size) { + md = p; + if (!efi_wb(md)) { + continue; + } + if (pmd == NULL || !efi_wb(pmd) || efi_md_end(pmd) != md->phys_addr) { + contig_low = GRANULEROUNDUP(md->phys_addr); + contig_high = efi_md_end(md); + for (q = p + efi_desc_size; q < efi_map_end; q += efi_desc_size) { + check_md = q; + if (!efi_wb(check_md)) + break; + if (contig_high != check_md->phys_addr) + break; + contig_high = efi_md_end(check_md); + } + contig_high = GRANULEROUNDDOWN(contig_high); + } + if (!is_available_memory(md) || md->type == EFI_LOADER_DATA) + continue; + + /* Round ends inward to granule boundaries */ + as = max(contig_low, md->phys_addr); + ae = min(contig_high, efi_md_end(md)); + + /* keep within max_addr= command line arg */ + ae = min(ae, max_addr); + if (ae <= as) + continue; + + /* avoid going over mem= command line arg */ + if (total_mem + (ae - as) > mem_limit) + ae -= total_mem + (ae - as) - mem_limit; + + if (ae <= as) + continue; + + if (ae - as > space_needed) + break; + } + if (p >= efi_map_end) + panic("Can't allocate space for kernel memory descriptors"); + + return __va(as); +} + +/* + * Walk the EFI memory map and gather all memory available for kernel + * to use. We can allocate partial granules only if the unavailable + * parts exist, and are WB. + */ +void +efi_memmap_init(unsigned long *s, unsigned long *e) +{ + struct kern_memdesc *k, *prev = 0; + u64 contig_low=0, contig_high=0; + u64 as, ae, lim; + void *efi_map_start, *efi_map_end, *p, *q; + efi_memory_desc_t *md, *pmd = NULL, *check_md; + u64 efi_desc_size; + unsigned long total_mem = 0; + + k = kern_memmap = find_memmap_space(); + + efi_map_start = __va(ia64_boot_param->efi_memmap); + efi_map_end = efi_map_start + ia64_boot_param->efi_memmap_size; + efi_desc_size = ia64_boot_param->efi_memdesc_size; + + for (p = efi_map_start; p < efi_map_end; pmd = md, p += efi_desc_size) { + md = p; + if (!efi_wb(md)) { + if (efi_uc(md) && (md->type == EFI_CONVENTIONAL_MEMORY || + md->type == EFI_BOOT_SERVICES_DATA)) { + k->attribute = EFI_MEMORY_UC; + k->start = md->phys_addr; + k->num_pages = md->num_pages; + k++; + } + continue; + } + if (pmd == NULL || !efi_wb(pmd) || efi_md_end(pmd) != md->phys_addr) { + contig_low = GRANULEROUNDUP(md->phys_addr); + contig_high = efi_md_end(md); + for (q = p + efi_desc_size; q < efi_map_end; q += efi_desc_size) { + check_md = q; + if (!efi_wb(check_md)) + break; + if (contig_high != check_md->phys_addr) + break; + contig_high = efi_md_end(check_md); + } + contig_high = GRANULEROUNDDOWN(contig_high); + } + if (!is_available_memory(md)) + continue; + + /* + * Round ends inward to granule boundaries + * Give trimmings to uncached allocator + */ + if (md->phys_addr < contig_low) { + lim = min(efi_md_end(md), contig_low); + if (efi_uc(md)) { + if (k > kern_memmap && (k-1)->attribute == EFI_MEMORY_UC && + kmd_end(k-1) == md->phys_addr) { + (k-1)->num_pages += (lim - md->phys_addr) >> EFI_PAGE_SHIFT; + } else { + k->attribute = EFI_MEMORY_UC; + k->start = md->phys_addr; + k->num_pages = (lim - md->phys_addr) >> EFI_PAGE_SHIFT; + k++; + } + } + as = contig_low; + } else + as = md->phys_addr; + + if (efi_md_end(md) > contig_high) { + lim = max(md->phys_addr, contig_high); + if (efi_uc(md)) { + if (lim == md->phys_addr && k > kern_memmap && + (k-1)->attribute == EFI_MEMORY_UC && + kmd_end(k-1) == md->phys_addr) { + (k-1)->num_pages += md->num_pages; + } else { + k->attribute = EFI_MEMORY_UC; + k->start = lim; + k->num_pages = (efi_md_end(md) - lim) >> EFI_PAGE_SHIFT; + k++; + } + } + ae = contig_high; + } else + ae = efi_md_end(md); + + /* keep within max_addr= command line arg */ + ae = min(ae, max_addr); + if (ae <= as) + continue; + + /* avoid going over mem= command line arg */ + if (total_mem + (ae - as) > mem_limit) + ae -= total_mem + (ae - as) - mem_limit; + + if (ae <= as) + continue; + if (prev && kmd_end(prev) == md->phys_addr) { + prev->num_pages += (ae - as) >> EFI_PAGE_SHIFT; + total_mem += ae - as; + continue; + } + k->attribute = EFI_MEMORY_WB; + k->start = as; + k->num_pages = (ae - as) >> EFI_PAGE_SHIFT; + total_mem += ae - as; + prev = k++; + } + k->start = ~0L; /* end-marker */ + + /* reserve the memory we are using for kern_memmap */ + *s = (u64)kern_memmap; + *e = (u64)++k; +} diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index 84f89da7c640..1658d687b79c 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -211,6 +211,9 @@ reserve_memory (void) } #endif + efi_memmap_init(&rsvd_region[n].start, &rsvd_region[n].end); + n++; + /* end of memory marker */ rsvd_region[n].start = ~0UL; rsvd_region[n].end = ~0UL; diff --git a/arch/ia64/kernel/uncached.c b/arch/ia64/kernel/uncached.c index 4e9d06c48a8b..c6d40446c2c4 100644 --- a/arch/ia64/kernel/uncached.c +++ b/arch/ia64/kernel/uncached.c @@ -205,23 +205,18 @@ EXPORT_SYMBOL(uncached_free_page); static int __init uncached_build_memmap(unsigned long start, unsigned long end, void *arg) { - long length; - unsigned long vstart, vend; + long length = end - start; int node; - length = end - start; - vstart = start + __IA64_UNCACHED_OFFSET; - vend = end + __IA64_UNCACHED_OFFSET; - dprintk(KERN_ERR "uncached_build_memmap(%lx %lx)\n", start, end); - memset((char *)vstart, 0, length); + memset((char *)start, 0, length); - node = paddr_to_nid(start); + node = paddr_to_nid(start - __IA64_UNCACHED_OFFSET); - for (; vstart < vend ; vstart += PAGE_SIZE) { - dprintk(KERN_INFO "sticking %lx into the pool!\n", vstart); - gen_pool_free(uncached_pool[node], vstart, PAGE_SIZE); + for (; start < end ; start += PAGE_SIZE) { + dprintk(KERN_INFO "sticking %lx into the pool!\n", start); + gen_pool_free(uncached_pool[node], start, PAGE_SIZE); } return 0; -- cgit v1.2.2 From 1fa92957282e4595727c1a21bf6687ea5a2d612f Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Fri, 9 Sep 2005 11:41:12 -0700 Subject: [IA64] Need to include in a few more places. Signed-off-by: Tony Luck --- arch/ia64/sn/pci/pcibr/pcibr_reg.c | 1 + arch/ia64/sn/pci/tioca_provider.c | 1 + arch/ia64/sn/pci/tioce_provider.c | 1 + 3 files changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/ia64/sn/pci/pcibr/pcibr_reg.c b/arch/ia64/sn/pci/pcibr/pcibr_reg.c index 1624b39cb3ec..4f718c3e93d3 100644 --- a/arch/ia64/sn/pci/pcibr/pcibr_reg.c +++ b/arch/ia64/sn/pci/pcibr/pcibr_reg.c @@ -8,6 +8,7 @@ #include #include +#include #include #include #include diff --git a/arch/ia64/sn/pci/tioca_provider.c b/arch/ia64/sn/pci/tioca_provider.c index eaae2472d6b4..9b8dbce2b7b6 100644 --- a/arch/ia64/sn/pci/tioca_provider.c +++ b/arch/ia64/sn/pci/tioca_provider.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/ia64/sn/pci/tioce_provider.c b/arch/ia64/sn/pci/tioce_provider.c index 204826c2fa44..9f03d4e5121c 100644 --- a/arch/ia64/sn/pci/tioce_provider.c +++ b/arch/ia64/sn/pci/tioce_provider.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.2 From 0b9afede3d9c66fef06f1d5ef5ff15c4b97730fc Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Tue, 6 Sep 2005 11:20:49 -0600 Subject: [IA64] more robust zx1/sx1000 machvec support Machine vector selection has always been a bit of a hack given how early in system boot it needs to be done. Services like ACPI namespace are not available and there are non-trivial problems to moving them to early boot. However, there's no reason we can't change to a different machvec later in boot when the services we need are available. By adding a entry point for later initialization of the swiotlb, we can add an error path for the hpzx1 machevec initialization and fall back to the DIG machine vector if IOMMU hardware isn't found in the system. Since ia64 uses 4GB for zone DMA (no ISA support), it's trivial to allocate a contiguous range from the slab for bounce buffer usage. Signed-off-by: Alex Williamson Signed-off-by: Tony Luck --- arch/ia64/hp/common/hwsw_iommu.c | 13 ++++- arch/ia64/hp/common/sba_iommu.c | 45 ++++++++++++----- arch/ia64/lib/swiotlb.c | 102 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 145 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/ia64/hp/common/hwsw_iommu.c b/arch/ia64/hp/common/hwsw_iommu.c index 80f8ef013939..317c334c5a18 100644 --- a/arch/ia64/hp/common/hwsw_iommu.c +++ b/arch/ia64/hp/common/hwsw_iommu.c @@ -17,7 +17,7 @@ #include /* swiotlb declarations & definitions: */ -extern void swiotlb_init_with_default_size (size_t size); +extern int swiotlb_late_init_with_default_size (size_t size); extern ia64_mv_dma_alloc_coherent swiotlb_alloc_coherent; extern ia64_mv_dma_free_coherent swiotlb_free_coherent; extern ia64_mv_dma_map_single swiotlb_map_single; @@ -67,7 +67,16 @@ void hwsw_init (void) { /* default to a smallish 2MB sw I/O TLB */ - swiotlb_init_with_default_size (2 * (1<<20)); + if (swiotlb_late_init_with_default_size (2 * (1<<20)) != 0) { +#ifdef CONFIG_IA64_GENERIC + /* Better to have normal DMA than panic */ + printk(KERN_WARNING "%s: Failed to initialize software I/O TLB," + " reverting to hpzx1 platform vector\n", __FUNCTION__); + machvec_init("hpzx1"); +#else + panic("Unable to initialize software I/O TLB services"); +#endif + } } void * diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c index 11957598a8b9..e64ca04ace89 100644 --- a/arch/ia64/hp/common/sba_iommu.c +++ b/arch/ia64/hp/common/sba_iommu.c @@ -2028,9 +2028,40 @@ static struct acpi_driver acpi_sba_ioc_driver = { static int __init sba_init(void) { + if (!ia64_platform_is("hpzx1") && !ia64_platform_is("hpzx1_swiotlb")) + return 0; + acpi_bus_register_driver(&acpi_sba_ioc_driver); - if (!ioc_list) + if (!ioc_list) { +#ifdef CONFIG_IA64_GENERIC + extern int swiotlb_late_init_with_default_size (size_t size); + + /* + * If we didn't find something sba_iommu can claim, we + * need to setup the swiotlb and switch to the dig machvec. + */ + if (swiotlb_late_init_with_default_size(64 * (1<<20)) != 0) + panic("Unable to find SBA IOMMU or initialize " + "software I/O TLB: Try machvec=dig boot option"); + machvec_init("dig"); +#else + panic("Unable to find SBA IOMMU: Try a generic or DIG kernel"); +#endif return 0; + } + +#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_HP_ZX1_SWIOTLB) + /* + * hpzx1_swiotlb needs to have a fairly small swiotlb bounce + * buffer setup to support devices with smaller DMA masks than + * sba_iommu can handle. + */ + if (ia64_platform_is("hpzx1_swiotlb")) { + extern void hwsw_init(void); + + hwsw_init(); + } +#endif #ifdef CONFIG_PCI { @@ -2048,18 +2079,6 @@ sba_init(void) subsys_initcall(sba_init); /* must be initialized after ACPI etc., but before any drivers... */ -extern void dig_setup(char**); -/* - * MAX_DMA_ADDRESS needs to be setup prior to paging_init to do any good, - * so we use the platform_setup hook to fix it up. - */ -void __init -sba_setup(char **cmdline_p) -{ - MAX_DMA_ADDRESS = ~0UL; - dig_setup(cmdline_p); -} - static int __init nosbagart(char *str) { diff --git a/arch/ia64/lib/swiotlb.c b/arch/ia64/lib/swiotlb.c index dbc0b3e449c5..875b0c16250c 100644 --- a/arch/ia64/lib/swiotlb.c +++ b/arch/ia64/lib/swiotlb.c @@ -49,6 +49,15 @@ */ #define IO_TLB_SHIFT 11 +#define SLABS_PER_PAGE (1 << (PAGE_SHIFT - IO_TLB_SHIFT)) + +/* + * Minimum IO TLB size to bother booting with. Systems with mainly + * 64bit capable cards will only lightly use the swiotlb. If we can't + * allocate a contiguous 1MB, we're probably in trouble anyway. + */ +#define IO_TLB_MIN_SLABS ((1<<20) >> IO_TLB_SHIFT) + int swiotlb_force; /* @@ -154,6 +163,99 @@ swiotlb_init (void) swiotlb_init_with_default_size(64 * (1<<20)); /* default to 64MB */ } +/* + * Systems with larger DMA zones (those that don't support ISA) can + * initialize the swiotlb later using the slab allocator if needed. + * This should be just like above, but with some error catching. + */ +int +swiotlb_late_init_with_default_size (size_t default_size) +{ + unsigned long i, req_nslabs = io_tlb_nslabs; + unsigned int order; + + if (!io_tlb_nslabs) { + io_tlb_nslabs = (default_size >> IO_TLB_SHIFT); + io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE); + } + + /* + * Get IO TLB memory from the low pages + */ + order = get_order(io_tlb_nslabs * (1 << IO_TLB_SHIFT)); + io_tlb_nslabs = SLABS_PER_PAGE << order; + + while ((SLABS_PER_PAGE << order) > IO_TLB_MIN_SLABS) { + io_tlb_start = (char *)__get_free_pages(GFP_DMA | __GFP_NOWARN, + order); + if (io_tlb_start) + break; + order--; + } + + if (!io_tlb_start) + goto cleanup1; + + if (order != get_order(io_tlb_nslabs * (1 << IO_TLB_SHIFT))) { + printk(KERN_WARNING "Warning: only able to allocate %ld MB " + "for software IO TLB\n", (PAGE_SIZE << order) >> 20); + io_tlb_nslabs = SLABS_PER_PAGE << order; + } + io_tlb_end = io_tlb_start + io_tlb_nslabs * (1 << IO_TLB_SHIFT); + memset(io_tlb_start, 0, io_tlb_nslabs * (1 << IO_TLB_SHIFT)); + + /* + * Allocate and initialize the free list array. This array is used + * to find contiguous free memory regions of size up to IO_TLB_SEGSIZE + * between io_tlb_start and io_tlb_end. + */ + io_tlb_list = (unsigned int *)__get_free_pages(GFP_KERNEL, + get_order(io_tlb_nslabs * sizeof(int))); + if (!io_tlb_list) + goto cleanup2; + + for (i = 0; i < io_tlb_nslabs; i++) + io_tlb_list[i] = IO_TLB_SEGSIZE - OFFSET(i, IO_TLB_SEGSIZE); + io_tlb_index = 0; + + io_tlb_orig_addr = (unsigned char **)__get_free_pages(GFP_KERNEL, + get_order(io_tlb_nslabs * sizeof(char *))); + if (!io_tlb_orig_addr) + goto cleanup3; + + memset(io_tlb_orig_addr, 0, io_tlb_nslabs * sizeof(char *)); + + /* + * Get the overflow emergency buffer + */ + io_tlb_overflow_buffer = (void *)__get_free_pages(GFP_DMA, + get_order(io_tlb_overflow)); + if (!io_tlb_overflow_buffer) + goto cleanup4; + + printk(KERN_INFO "Placing %ldMB software IO TLB between 0x%lx - " + "0x%lx\n", (io_tlb_nslabs * (1 << IO_TLB_SHIFT)) >> 20, + virt_to_phys(io_tlb_start), virt_to_phys(io_tlb_end)); + + return 0; + +cleanup4: + free_pages((unsigned long)io_tlb_orig_addr, get_order(io_tlb_nslabs * + sizeof(char *))); + io_tlb_orig_addr = NULL; +cleanup3: + free_pages((unsigned long)io_tlb_list, get_order(io_tlb_nslabs * + sizeof(int))); + io_tlb_list = NULL; + io_tlb_end = NULL; +cleanup2: + free_pages((unsigned long)io_tlb_start, order); + io_tlb_start = NULL; +cleanup1: + io_tlb_nslabs = req_nslabs; + return -ENOMEM; +} + static inline int address_needs_mapping(struct device *hwdev, dma_addr_t addr) { -- cgit v1.2.2 From f2b518d71636c2bda65a837b0a93c3365207a4f0 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 14 Sep 2005 16:50:19 -0600 Subject: [IA64] Update default configs PNP and PNPACPI turned on i8042 recently changed from ACPI to PNP detection. Without PNP, it probes legacy I/O ports for the keyboard controller, which causes an MCA on HP boxes. Also, I'm about to remove 8250_acpi.c, so we'll need PNP to detect non-PCI serial ports. Until 8250_acpi.c is removed, some systems will see serial ports reported twice (once from 8250_acpi.c and again from 8250_pnp.c). This is harmless. PNPACPI is still marked EXPERIMENTAL, but I'm not aware of any outstanding issues on ia64. IDE_GENERIC turned off (except for SGI simulator, all ia64 IDE is PCI) ide-generic probes compiled-in legacy I/O ports for IDE devices, which again causes an MCA. It would be nicer to just get rid of all the legacy junk from include/asm-ia64/ide.h, but that is a bit riskier because it could break ide-cs and the HDIO_REGISTER_HWIF ioctl (http://www.ussg.iu.edu/hypermail/linux/kernel/0508.2/0049.html). Here's the essence of the patch: -# CONFIG_PNP is not set +CONFIG_PNP=y +CONFIG_PNPACPI=y -CONFIG_IDE_GENERIC=y +# CONFIG_IDE_GENERIC is not set Tested on tiger, bigsur, and zx1. Signed-off-by: Bjorn Helgaas Signed-off-by: Tony Luck --- arch/ia64/configs/bigsur_defconfig | 395 +++++++++++++++++++++++++------------ arch/ia64/configs/tiger_defconfig | 86 ++++++-- arch/ia64/configs/zx1_defconfig | 92 ++++++--- arch/ia64/defconfig | 265 ++++++++++++++++--------- 4 files changed, 576 insertions(+), 262 deletions(-) (limited to 'arch') diff --git a/arch/ia64/configs/bigsur_defconfig b/arch/ia64/configs/bigsur_defconfig index 3b65cbb31b1d..b40672bb3ab0 100644 --- a/arch/ia64/configs/bigsur_defconfig +++ b/arch/ia64/configs/bigsur_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.10-rc2 -# Mon Nov 29 13:27:48 2004 +# Linux kernel version: 2.6.14-rc1 +# Wed Sep 14 15:18:49 2005 # # @@ -10,34 +10,40 @@ CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=16 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +# CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -58,12 +64,15 @@ CONFIG_IA64=y CONFIG_64BIT=y CONFIG_MMU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_TIME_INTERPOLATION=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # CONFIG_IA64_GENERIC is not set CONFIG_IA64_DIG=y # CONFIG_IA64_HP_ZX1 is not set +# CONFIG_IA64_HP_ZX1_SWIOTLB is not set # CONFIG_IA64_SGI_SN2 is not set # CONFIG_IA64_HP_SIM is not set CONFIG_ITANIUM=y @@ -72,17 +81,30 @@ CONFIG_ITANIUM=y # CONFIG_IA64_PAGE_SIZE_8KB is not set CONFIG_IA64_PAGE_SIZE_16KB=y # CONFIG_IA64_PAGE_SIZE_64KB is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 CONFIG_IA64_BRL_EMU=y CONFIG_IA64_L1_CACHE_SHIFT=6 # CONFIG_NUMA is not set # CONFIG_VIRTUAL_MEM_MAP is not set # CONFIG_IA64_CYCLONE is not set CONFIG_IOSAPIC=y +# CONFIG_IA64_SGI_SN_XP is not set CONFIG_FORCE_MAX_ZONEORDER=18 CONFIG_SMP=y CONFIG_NR_CPUS=2 # CONFIG_HOTPLUG_CPU is not set +# CONFIG_SCHED_SMT is not set CONFIG_PREEMPT=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set CONFIG_HAVE_DEC_LOCK=y CONFIG_IA32_SUPPORT=y CONFIG_COMPAT=y @@ -95,6 +117,7 @@ CONFIG_IA64_PALINFO=y # CONFIG_EFI_VARS=y CONFIG_EFI_PCDP=y +# CONFIG_DELL_RBU is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m @@ -102,18 +125,26 @@ CONFIG_BINFMT_MISC=m # Power management and ACPI # CONFIG_PM=y -CONFIG_ACPI=y +# CONFIG_PM_DEBUG is not set # # ACPI (Advanced Configuration and Power Interface) Support # +CONFIG_ACPI=y CONFIG_ACPI_BUTTON=m CONFIG_ACPI_FAN=m CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_THERMAL=m +CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y +# CONFIG_ACPI_CONTAINER is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set # # Bus options (PCI, PCMCIA) @@ -122,7 +153,7 @@ CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set # # PCI Hotplug Support @@ -135,8 +166,70 @@ CONFIG_PCI_NAMES=y # CONFIG_PCCARD is not set # -# PC-card bridges +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing # +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -150,6 +243,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + # # Memory Technology Devices (MTD) # @@ -163,7 +261,13 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Plug and Play support # -# CONFIG_PNP is not set +CONFIG_PNP=y +# CONFIG_PNP_DEBUG is not set + +# +# Protocols +# +CONFIG_PNPACPI=y # # Block devices @@ -172,14 +276,15 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=m +CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set # @@ -189,6 +294,7 @@ CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support @@ -211,7 +317,8 @@ CONFIG_BLK_DEV_IDEFLOPPY=m # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=m +# CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_BLK_DEV_OFFBOARD is not set @@ -233,6 +340,7 @@ CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set CONFIG_BLK_DEV_PIIX=m +# CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set @@ -250,6 +358,7 @@ CONFIG_IDEDMA_AUTO=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -261,6 +370,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -274,6 +384,8 @@ CONFIG_SCSI_LOGGING=y # CONFIG_SCSI_SPI_ATTRS=m # CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers @@ -288,18 +400,13 @@ CONFIG_SCSI_SPI_ATTRS=m # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set CONFIG_SCSI_QLOGIC_1280=y # CONFIG_SCSI_QLOGIC_1280_1040 is not set @@ -309,7 +416,8 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA6322 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set @@ -332,11 +440,14 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m +# CONFIG_DM_MULTIPATH is not set # # Fusion MPT device support # # CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set # # IEEE 1394 (FireWire) support @@ -349,78 +460,25 @@ CONFIG_DM_ZERO=m # CONFIG_I2O is not set # -# Networking support +# Network device support # -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_NET_SB1000 is not set # # ARCnet devices # # CONFIG_ARCNET is not set +# +# PHY device support +# +# CONFIG_PHYLIB is not set + # # Ethernet (10 or 100Mbit) # @@ -443,7 +501,6 @@ CONFIG_NET_PCI=y # CONFIG_FORCEDETH is not set # CONFIG_DGRS is not set CONFIG_EEPRO100=y -# CONFIG_EEPRO100_PIO is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -465,13 +522,17 @@ CONFIG_EEPRO100=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -496,6 +557,8 @@ CONFIG_EEPRO100=y # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -524,18 +587,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_RAW is not set - # # Input Device Drivers # @@ -553,6 +604,17 @@ CONFIG_MOUSE_PS2=y # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + # # Character devices # @@ -571,7 +633,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_MULTIPORT is not set # CONFIG_SERIAL_8250_RSA is not set # @@ -579,6 +640,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -603,14 +665,22 @@ CONFIG_EFI_RTC=y # CONFIG_AGP=m CONFIG_AGP_I460=m -CONFIG_DRM=y +CONFIG_DRM=m # CONFIG_DRM_TDFX is not set CONFIG_DRM_R128=m # CONFIG_DRM_RADEON is not set # CONFIG_DRM_MGA is not set # CONFIG_DRM_SIS is not set +# CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HPET is not set +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set # # I2C support @@ -635,7 +705,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set -# CONFIG_I2C_ISA is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set @@ -651,16 +721,43 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_PCA_ISA is not set # -# Hardware Sensors Chip support +# Miscellaneous I2C Chip support # -# CONFIG_I2C_SENSOR is not set +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set @@ -671,33 +768,26 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # -# Other I2C Chip support -# -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus +# Misc devices # -# CONFIG_W1 is not set # -# Misc devices +# Multimedia Capabilities Port drivers # # @@ -752,11 +842,12 @@ CONFIG_SND_OPL3_LIB=m # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_AC97_BUS=m # # PCI devices # -CONFIG_SND_AC97_CODEC=m # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set @@ -768,6 +859,8 @@ CONFIG_SND_AC97_CODEC=m # CONFIG_SND_CS46XX is not set CONFIG_SND_CS4281=m # CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_CA0106 is not set # CONFIG_SND_KORG1212 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set @@ -775,9 +868,10 @@ CONFIG_SND_CS4281=m # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_YMFPCI is not set -# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_AD1889 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set @@ -791,13 +885,14 @@ CONFIG_SND_CS4281=m # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set +# CONFIG_SND_HDA_INTEL is not set # # USB devices # # CONFIG_SND_USB_AUDIO is not set -# CONFIG_SND_USB_USX2Y is not set # # Open Sound System @@ -807,6 +902,8 @@ CONFIG_SND_CS4281=m # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=m # CONFIG_USB_DEBUG is not set @@ -818,35 +915,38 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y # # USB Host Controller Drivers # # CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_OHCI_HCD is not set CONFIG_USB_UHCI_HCD=m +# CONFIG_USB_SL811_HCD is not set # # USB Device Class drivers # -CONFIG_USB_AUDIO=m +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set CONFIG_USB_BLUETOOTH_TTY=m -CONFIG_USB_MIDI=m CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_RW_DETECT is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_HP8200e is not set +# CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # # USB Input Devices @@ -863,19 +963,23 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_MOUSE is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set # CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set # # USB Multimedia devices @@ -894,6 +998,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y # # USB port drivers @@ -909,7 +1014,6 @@ CONFIG_USB_HIDDEV=y # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set -# CONFIG_USB_TIGL is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set @@ -918,10 +1022,12 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set # -# USB ATM/DSL drivers +# USB DSL modem support # # @@ -929,11 +1035,26 @@ CONFIG_USB_HIDDEV=y # # CONFIG_USB_GADGET is not set +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set @@ -945,17 +1066,20 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=y -# CONFIG_XFS_RT is not set +CONFIG_XFS_EXPORT=y CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y +# CONFIG_XFS_RT is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_QUOTACTL=y CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -982,14 +1106,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -CONFIG_DEVPTS_FS_XATTR=y -CONFIG_DEVPTS_FS_SECURITY=y CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -1013,15 +1134,18 @@ CONFIG_RAMFS=y # CONFIG_NFS_FS=m CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y CONFIG_NFSD_TCP=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m +CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m CONFIG_RPCSEC_GSS_KRB5=m @@ -1031,9 +1155,11 @@ CONFIG_CIFS=m CONFIG_CIFS_STATS=y CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -1103,8 +1229,12 @@ CONFIG_NLS_UTF8=m # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_PENDING_IRQ=y # # Profiling support @@ -1115,14 +1245,20 @@ CONFIG_OPROFILE=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_KPROBES is not set # CONFIG_IA64_GRANULE_16MB is not set CONFIG_IA64_GRANULE_64MB=y # CONFIG_IA64_PRINT_HAZARDS is not set @@ -1149,6 +1285,7 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set @@ -1164,3 +1301,7 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig index d452e18ac494..9bc8bcafc905 100644 --- a/arch/ia64/configs/tiger_defconfig +++ b/arch/ia64/configs/tiger_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc6-tiger-smp -# Wed Aug 17 10:19:51 2005 +# Linux kernel version: 2.6.14-rc1 +# Wed Sep 14 15:17:57 2005 # # @@ -16,6 +16,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y @@ -27,6 +28,7 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y @@ -103,6 +105,7 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set CONFIG_HAVE_DEC_LOCK=y CONFIG_IA32_SUPPORT=y CONFIG_COMPAT=y @@ -115,6 +118,7 @@ CONFIG_IA64_PALINFO=y # CONFIG_EFI_VARS=y CONFIG_EFI_PCDP=y +# CONFIG_DELL_RBU is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m @@ -122,20 +126,27 @@ CONFIG_BINFMT_MISC=m # Power management and ACPI # CONFIG_PM=y -CONFIG_ACPI=y +# CONFIG_PM_DEBUG is not set # # ACPI (Advanced Configuration and Power Interface) Support # +CONFIG_ACPI=y CONFIG_ACPI_BUTTON=m CONFIG_ACPI_FAN=m CONFIG_ACPI_PROCESSOR=m -# CONFIG_ACPI_HOTPLUG_CPU is not set +CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=m +CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y -# CONFIG_ACPI_CONTAINER is not set +CONFIG_ACPI_CONTAINER=m + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set # # Bus options (PCI, PCMCIA) @@ -144,7 +155,6 @@ CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y # CONFIG_PCI_DEBUG is not set # @@ -188,13 +198,18 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_NETFILTER is not set +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + # # SCTP Configuration (EXPERIMENTAL) # @@ -218,9 +233,11 @@ CONFIG_TCP_CONG_BIC=y # Network testing # # CONFIG_NET_PKTGEN is not set +# CONFIG_NETFILTER_NETLINK is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -234,6 +251,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m # CONFIG_DEBUG_DRIVER is not set +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + # # Memory Technology Devices (MTD) # @@ -247,7 +269,13 @@ CONFIG_FW_LOADER=m # # Plug and Play support # -# CONFIG_PNP is not set +CONFIG_PNP=y +# CONFIG_PNP_DEBUG is not set + +# +# Protocols +# +CONFIG_PNPACPI=y # # Block devices @@ -266,7 +294,6 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set # @@ -299,7 +326,8 @@ CONFIG_BLK_DEV_IDESCSI=m # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y +# CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y # CONFIG_IDEPCI_SHARE_IRQ is not set # CONFIG_BLK_DEV_OFFBOARD is not set @@ -339,6 +367,7 @@ CONFIG_IDEDMA_AUTO=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -366,6 +395,7 @@ CONFIG_CHR_DEV_SG=m CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers @@ -454,12 +484,18 @@ CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_NET_SB1000 is not set # # ARCnet devices # # CONFIG_ARCNET is not set +# +# PHY device support +# +# CONFIG_PHYLIB is not set + # # Ethernet (10 or 100Mbit) # @@ -481,6 +517,7 @@ CONFIG_TULIP=m # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set +# CONFIG_ULI526X is not set # CONFIG_HP100 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set @@ -512,6 +549,7 @@ CONFIG_E1000=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set @@ -521,6 +559,7 @@ CONFIG_TIGON3=y # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -618,6 +657,7 @@ CONFIG_HW_CONSOLE=y CONFIG_SERIAL_NONSTANDARD=y # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set +# CONFIG_DIGIEPCA is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set @@ -675,6 +715,7 @@ CONFIG_DRM_RADEON=m CONFIG_DRM_MGA=m CONFIG_DRM_SIS=m # CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set CONFIG_RAW_DRIVER=m CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set @@ -691,7 +732,6 @@ CONFIG_MAX_RAW_DEVS=256 # I2C support # # CONFIG_I2C is not set -# CONFIG_I2C_SENSOR is not set # # Dallas's 1-wire bus @@ -702,12 +742,17 @@ CONFIG_MAX_RAW_DEVS=256 # Hardware Monitoring support # CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set # CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices # +# +# Multimedia Capabilities Port drivers +# + # # Multimedia devices # @@ -800,9 +845,11 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_MTOUCH is not set # CONFIG_USB_ITMTOUCH is not set # CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set # CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set # # USB Imaging devices @@ -902,16 +949,12 @@ CONFIG_REISERFS_FS_POSIX_ACL=y CONFIG_REISERFS_FS_SECURITY=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# CONFIG_XFS_FS=y CONFIG_XFS_EXPORT=y -# CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -919,6 +962,7 @@ CONFIG_INOTIFY=y CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=y CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -947,13 +991,11 @@ CONFIG_NTFS_FS=m CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -CONFIG_TMPFS_XATTR=y -CONFIG_TMPFS_SECURITY=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -1003,6 +1045,7 @@ CONFIG_CIFS=m # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -1072,10 +1115,12 @@ CONFIG_NLS_UTF8=m # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_PENDING_IRQ=y # # Profiling support @@ -1089,6 +1134,7 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_LOG_BUF_SHIFT=20 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig index 80b0e9eb7fb3..0856ca67dd50 100644 --- a/arch/ia64/configs/zx1_defconfig +++ b/arch/ia64/configs/zx1_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc6 -# Wed Aug 17 10:02:43 2005 +# Linux kernel version: 2.6.14-rc1 +# Wed Sep 14 15:15:01 2005 # # @@ -18,6 +18,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set @@ -29,6 +30,7 @@ CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set # CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set @@ -103,6 +105,7 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set CONFIG_HAVE_DEC_LOCK=y CONFIG_IA32_SUPPORT=y CONFIG_COMPAT=y @@ -115,6 +118,7 @@ CONFIG_IA64_PALINFO=y # CONFIG_EFI_VARS=y CONFIG_EFI_PCDP=y +# CONFIG_DELL_RBU is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y @@ -122,20 +126,27 @@ CONFIG_BINFMT_MISC=y # Power management and ACPI # CONFIG_PM=y -CONFIG_ACPI=y +# CONFIG_PM_DEBUG is not set # # ACPI (Advanced Configuration and Power Interface) Support # +CONFIG_ACPI=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y +CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_CONTAINER is not set +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + # # Bus options (PCI, PCMCIA) # @@ -143,7 +154,6 @@ CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y # CONFIG_PCI_DEBUG is not set # @@ -187,8 +197,8 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_TUNNEL is not set -# CONFIG_IP_TCPDIAG is not set -# CONFIG_IP_TCPDIAG_IPV6 is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y @@ -204,13 +214,17 @@ CONFIG_NETFILTER=y # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set -# CONFIG_IP_NF_CONNTRACK_MARK is not set # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set CONFIG_IP_NF_ARPTABLES=y # CONFIG_IP_NF_ARPFILTER is not set # CONFIG_IP_NF_ARP_MANGLE is not set +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + # # SCTP Configuration (EXPERIMENTAL) # @@ -234,9 +248,11 @@ CONFIG_IP_NF_ARPTABLES=y # Network testing # # CONFIG_NET_PKTGEN is not set +# CONFIG_NETFILTER_NETLINK is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -250,6 +266,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + # # Memory Technology Devices (MTD) # @@ -263,7 +284,13 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Plug and Play support # -# CONFIG_PNP is not set +CONFIG_PNP=y +# CONFIG_PNP_DEBUG is not set + +# +# Protocols +# +CONFIG_PNPACPI=y # # Block devices @@ -282,7 +309,6 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set # @@ -315,7 +341,8 @@ CONFIG_BLK_DEV_IDECD=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y +# CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_BLK_DEV_OFFBOARD is not set @@ -354,6 +381,7 @@ CONFIG_BLK_DEV_IDEDMA=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -381,6 +409,7 @@ CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers @@ -457,12 +486,18 @@ CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_NET_SB1000 is not set # # ARCnet devices # # CONFIG_ARCNET is not set +# +# PHY device support +# +# CONFIG_PHYLIB is not set + # # Ethernet (10 or 100Mbit) # @@ -485,6 +520,7 @@ CONFIG_TULIP_NAPI_HW_MITIGATION=y # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set +# CONFIG_ULI526X is not set # CONFIG_HP100 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set @@ -516,6 +552,7 @@ CONFIG_E1000=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set @@ -525,6 +562,7 @@ CONFIG_TIGON3=y # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -650,12 +688,12 @@ CONFIG_AGP=y CONFIG_AGP_HP_ZX1=y CONFIG_DRM=y # CONFIG_DRM_TDFX is not set -# CONFIG_DRM_GAMMA is not set # CONFIG_DRM_R128 is not set CONFIG_DRM_RADEON=y # CONFIG_DRM_MGA is not set # CONFIG_DRM_SIS is not set # CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HPET is not set # CONFIG_HANGCHECK_TIMER is not set @@ -689,7 +727,6 @@ CONFIG_I2C_ALGOPCF=y # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_ISA is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set @@ -703,7 +740,6 @@ CONFIG_I2C_ALGOPCF=y # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set -# CONFIG_I2C_SENSOR is not set # # Miscellaneous I2C Chip support @@ -730,11 +766,16 @@ CONFIG_I2C_ALGOPCF=y # Hardware Monitoring support # # CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set # # Misc devices # +# +# Multimedia Capabilities Port drivers +# + # # Multimedia devices # @@ -806,6 +847,7 @@ CONFIG_FB_RADEON_DEBUG=y # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_PM3 is not set # CONFIG_FB_S1D13XXX is not set @@ -862,11 +904,12 @@ CONFIG_SND_OPL3_LIB=y # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set +CONFIG_SND_AC97_CODEC=y +CONFIG_SND_AC97_BUS=y # # PCI devices # -CONFIG_SND_AC97_CODEC=y # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set @@ -890,7 +933,7 @@ CONFIG_SND_AC97_CODEC=y # CONFIG_SND_HDSPM is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_YMFPCI is not set -# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_AD1889 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set @@ -952,9 +995,8 @@ CONFIG_USB_UHCI_HCD=y # # USB Device Class drivers # -# CONFIG_USB_AUDIO is not set +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set # CONFIG_USB_BLUETOOTH_TTY is not set -# CONFIG_USB_MIDI is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set @@ -971,6 +1013,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # # USB Input Devices @@ -987,9 +1030,11 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_MTOUCH is not set # CONFIG_USB_ITMTOUCH is not set # CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set # CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set # # USB Imaging devices @@ -1088,10 +1133,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set - -# -# XFS support -# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -1100,6 +1141,7 @@ CONFIG_FS_MBCACHE=y CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=y # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -1126,13 +1168,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -CONFIG_TMPFS_XATTR=y -CONFIG_TMPFS_SECURITY=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -1177,6 +1217,7 @@ CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -1246,10 +1287,12 @@ CONFIG_NLS_UTF8=y # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_PENDING_IRQ=y # # Profiling support @@ -1263,6 +1306,7 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_LOG_BUF_SHIFT=17 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set diff --git a/arch/ia64/defconfig b/arch/ia64/defconfig index 5da208115ea1..6e3f147e03e5 100644 --- a/arch/ia64/defconfig +++ b/arch/ia64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12 -# Tue Jun 21 11:30:42 2005 +# Linux kernel version: 2.6.14-rc1 +# Wed Sep 14 15:13:03 2005 # # @@ -16,6 +16,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y @@ -27,6 +28,7 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y @@ -80,6 +82,10 @@ CONFIG_MCKINLEY=y # CONFIG_IA64_PAGE_SIZE_8KB is not set CONFIG_IA64_PAGE_SIZE_16KB=y # CONFIG_IA64_PAGE_SIZE_64KB is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 CONFIG_IA64_L1_CACHE_SHIFT=7 CONFIG_NUMA=y CONFIG_VIRTUAL_MEM_MAP=y @@ -87,12 +93,21 @@ CONFIG_HOLES_IN_ZONE=y CONFIG_ARCH_DISCONTIGMEM_ENABLE=y CONFIG_IA64_CYCLONE=y CONFIG_IOSAPIC=y +# CONFIG_IA64_SGI_SN_XP is not set CONFIG_FORCE_MAX_ZONEORDER=18 CONFIG_SMP=y CONFIG_NR_CPUS=512 CONFIG_HOTPLUG_CPU=y # CONFIG_SCHED_SMT is not set # CONFIG_PREEMPT is not set +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_DISCONTIGMEM_MANUAL=y +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_SPARSEMEM_STATIC is not set CONFIG_HAVE_DEC_LOCK=y CONFIG_IA32_SUPPORT=y CONFIG_COMPAT=y @@ -105,6 +120,7 @@ CONFIG_IA64_PALINFO=y # CONFIG_EFI_VARS=y CONFIG_EFI_PCDP=y +# CONFIG_DELL_RBU is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m @@ -112,22 +128,29 @@ CONFIG_BINFMT_MISC=m # Power management and ACPI # CONFIG_PM=y -CONFIG_ACPI=y +# CONFIG_PM_DEBUG is not set # # ACPI (Advanced Configuration and Power Interface) Support # +CONFIG_ACPI=y CONFIG_ACPI_BUTTON=m CONFIG_ACPI_FAN=m CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=m CONFIG_ACPI_NUMA=y +CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_ACPI_CONTAINER=m +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + # # Bus options (PCI, PCMCIA) # @@ -135,7 +158,6 @@ CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y # CONFIG_PCI_DEBUG is not set # @@ -147,12 +169,80 @@ CONFIG_HOTPLUG_PCI_ACPI=m # CONFIG_HOTPLUG_PCI_ACPI_IBM is not set # CONFIG_HOTPLUG_PCI_CPCI is not set # CONFIG_HOTPLUG_PCI_SHPC is not set +# CONFIG_HOTPLUG_PCI_SGI is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +CONFIG_ARPD=y +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + # # Device Drivers # @@ -162,9 +252,14 @@ CONFIG_HOTPLUG_PCI_ACPI=m # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=m # CONFIG_DEBUG_DRIVER is not set +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + # # Memory Technology Devices (MTD) # @@ -178,7 +273,13 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Plug and Play support # -# CONFIG_PNP is not set +CONFIG_PNP=y +# CONFIG_PNP_DEBUG is not set + +# +# Protocols +# +CONFIG_PNPACPI=y # # Block devices @@ -197,7 +298,6 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set # @@ -230,7 +330,8 @@ CONFIG_BLK_DEV_IDESCSI=m # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y +# CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y # CONFIG_IDEPCI_SHARE_IRQ is not set # CONFIG_BLK_DEV_OFFBOARD is not set @@ -252,6 +353,7 @@ CONFIG_BLK_DEV_CMD64X=y # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set CONFIG_BLK_DEV_PIIX=y +# CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set @@ -270,6 +372,7 @@ CONFIG_IDEDMA_AUTO=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -297,6 +400,7 @@ CONFIG_CHR_DEV_SG=m CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers @@ -314,6 +418,7 @@ CONFIG_SCSI_SATA=y # CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set # CONFIG_SCSI_ATA_PIIX is not set +# CONFIG_SCSI_SATA_MV is not set # CONFIG_SCSI_SATA_NV is not set # CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_QSTOR is not set @@ -335,7 +440,6 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set CONFIG_SCSI_QLOGIC_1280=y # CONFIG_SCSI_QLOGIC_1280_1040 is not set CONFIG_SCSI_QLA2XXX=y @@ -344,6 +448,7 @@ CONFIG_SCSI_QLA22XX=m CONFIG_SCSI_QLA2300=m CONFIG_SCSI_QLA2322=m # CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA24XX is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -390,80 +495,25 @@ CONFIG_FUSION_MAX_SGE=128 # CONFIG_I2O is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -CONFIG_ARPD=y -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - +# Network device support # -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -CONFIG_NETPOLL=y -# CONFIG_NETPOLL_RX is not set -# CONFIG_NETPOLL_TRAP is not set -CONFIG_NET_POLL_CONTROLLER=y -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_NET_SB1000 is not set # # ARCnet devices # # CONFIG_ARCNET is not set +# +# PHY device support +# +# CONFIG_PHYLIB is not set + # # Ethernet (10 or 100Mbit) # @@ -485,6 +535,7 @@ CONFIG_TULIP=m # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set +# CONFIG_ULI526X is not set # CONFIG_HP100 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set @@ -516,6 +567,7 @@ CONFIG_E1000=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set @@ -525,6 +577,7 @@ CONFIG_TIGON3=y # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -549,6 +602,10 @@ CONFIG_TIGON3=y # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set CONFIG_NETCONSOLE=y +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_RX is not set +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y # # ISDN subsystem @@ -607,9 +664,7 @@ CONFIG_GAMEPORT=m # CONFIG_GAMEPORT_NS558 is not set # CONFIG_GAMEPORT_L4 is not set # CONFIG_GAMEPORT_EMU10K1 is not set -# CONFIG_GAMEPORT_VORTEX is not set # CONFIG_GAMEPORT_FM801 is not set -# CONFIG_GAMEPORT_CS461X is not set # # Character devices @@ -620,6 +675,7 @@ CONFIG_HW_CONSOLE=y CONFIG_SERIAL_NONSTANDARD=y # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set +# CONFIG_DIGIEPCA is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set @@ -641,7 +697,6 @@ CONFIG_SERIAL_8250_NR_UARTS=6 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_MULTIPORT is not set # CONFIG_SERIAL_8250_RSA is not set # @@ -650,8 +705,8 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_SGI_L1_CONSOLE=y -CONFIG_SERIAL_SGI_IOC4=y # CONFIG_SERIAL_JSM is not set +CONFIG_SERIAL_SGI_IOC4=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -684,6 +739,8 @@ CONFIG_DRM_R128=m CONFIG_DRM_RADEON=m CONFIG_DRM_MGA=m CONFIG_DRM_SIS=m +# CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set CONFIG_RAW_DRIVER=m CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set @@ -707,10 +764,21 @@ CONFIG_MMTIMER=y # # CONFIG_W1 is not set +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + # # Misc devices # +# +# Multimedia Capabilities Port drivers +# + # # Multimedia devices # @@ -753,6 +821,7 @@ CONFIG_SND_PCM_OSS=m CONFIG_SND_SEQUENCER_OSS=y CONFIG_SND_VERBOSE_PRINTK=y # CONFIG_SND_DEBUG is not set +CONFIG_SND_GENERIC_DRIVER=y # # Generic devices @@ -764,11 +833,12 @@ CONFIG_SND_VIRMIDI=m CONFIG_SND_MTPAV=m CONFIG_SND_SERIAL_U16550=m CONFIG_SND_MPU401=m +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_AC97_BUS=m # # PCI devices # -CONFIG_SND_AC97_CODEC=m # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set @@ -790,9 +860,10 @@ CONFIG_SND_EMU10K1=m # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_YMFPCI is not set -# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_AD1889 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set @@ -844,6 +915,7 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_BIG_ENDIAN is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y @@ -853,9 +925,8 @@ CONFIG_USB_UHCI_HCD=m # # USB Device Class drivers # -# CONFIG_USB_AUDIO is not set +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set # CONFIG_USB_BLUETOOTH_TTY is not set -# CONFIG_USB_MIDI is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set @@ -888,12 +959,17 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_MOUSE is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set # CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set # # USB Imaging devices @@ -918,7 +994,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set -CONFIG_USB_MON=m +CONFIG_USB_MON=y # # USB port drivers @@ -944,10 +1020,11 @@ CONFIG_USB_MON=m # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set # -# USB ATM/DSL drivers +# USB DSL modem support # # @@ -964,6 +1041,8 @@ CONFIG_USB_MON=m # InfiniBand support # CONFIG_INFINIBAND=m +# CONFIG_INFINIBAND_USER_MAD is not set +# CONFIG_INFINIBAND_USER_ACCESS is not set CONFIG_INFINIBAND_MTHCA=m # CONFIG_INFINIBAND_MTHCA_DEBUG is not set CONFIG_INFINIBAND_IPOIB=m @@ -981,6 +1060,7 @@ CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y @@ -996,22 +1076,20 @@ CONFIG_REISERFS_FS_POSIX_ACL=y CONFIG_REISERFS_FS_SECURITY=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# CONFIG_XFS_FS=y CONFIG_XFS_EXPORT=y -# CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=y CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -1040,14 +1118,11 @@ CONFIG_NTFS_FS=m CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -CONFIG_TMPFS_XATTR=y -CONFIG_TMPFS_SECURITY=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -1071,15 +1146,18 @@ CONFIG_RAMFS=y # CONFIG_NFS_FS=m CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y CONFIG_NFS_DIRECTIO=y CONFIG_NFSD=m CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y CONFIG_NFSD_TCP=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m CONFIG_RPCSEC_GSS_KRB5=m @@ -1094,6 +1172,7 @@ CONFIG_CIFS=m # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -1163,10 +1242,12 @@ CONFIG_NLS_UTF8=m # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_PENDING_IRQ=y # # HP Simulator drivers @@ -1187,6 +1268,7 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_LOG_BUF_SHIFT=20 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1194,6 +1276,7 @@ CONFIG_LOG_BUF_SHIFT=20 # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set +# CONFIG_KPROBES is not set CONFIG_IA64_GRANULE_16MB=y # CONFIG_IA64_GRANULE_64MB is not set # CONFIG_IA64_PRINT_HAZARDS is not set @@ -1215,7 +1298,7 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -- cgit v1.2.2 From 24ee0a6d7b0a52b140c880aae24c255de3b4a9a1 Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Mon, 12 Sep 2005 12:15:43 -0500 Subject: [IA64] Cleanup use of various #defines related to nodes Some of the SN code & #defines related to compact nodes & IO discovery have gotten stale over the years. This patch attempts to clean them up. Some of the various SN MAX_xxx #defines were also unclear & misused. The primary changes are: - use MAX_NUMNODES. This is the generic linux #define for the number of nodes that are known to the generic kernel. Arrays & loops for constructs that are 1:1 with linux-defined nodes should use the linux #define - not an SN equivalent. - use MAX_COMPACT_NODES for MAX_NUMNODES + NUM_TIOS. This is the number of nodes in the SSI system. Compact nodes are a hack to get around the IA64 architectural limit of 256 nodes. Large SGI systems have more than 256 nodes. When we upgrade to ACPI3.0, I _hope_ that all nodes will be real nodes that are known to the generic kernel. That will allow us to delete the notion of "compact nodes". - add MAX_NUMALINK_NODES for the total number of nodes that are in the numalink domain - all partitions. - simplified (understandable) scan_for_ionodes() - small amount of cleanup related to cnodes Signed-off-by: Jack Steiner Signed-off-by: Tony Luck --- arch/ia64/sn/kernel/io_init.c | 4 +- arch/ia64/sn/kernel/setup.c | 160 ++++++++++++------------------------ arch/ia64/sn/kernel/sn2/sn_hwperf.c | 4 +- arch/ia64/sn/kernel/tiocx.c | 5 +- arch/ia64/sn/kernel/xpc_partition.c | 2 +- 5 files changed, 57 insertions(+), 118 deletions(-) (limited to 'arch') diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c index 906622d9f933..b4f5053f5e1b 100644 --- a/arch/ia64/sn/kernel/io_init.c +++ b/arch/ia64/sn/kernel/io_init.c @@ -22,8 +22,6 @@ #include "xtalk/hubdev.h" #include "xtalk/xwidgetdev.h" -nasid_t master_nasid = INVALID_NASID; /* Partition Master */ - static struct list_head sn_sysdata_list; /* sysdata list struct */ @@ -165,7 +163,7 @@ static void sn_fixup_ionodes(void) * Get SGI Specific HUB chipset information. * Inform Prom that this kernel can support domain bus numbering. */ - for (i = 0; i < numionodes; i++) { + for (i = 0; i < num_cnodes; i++) { hubdev = (struct hubdev_info *)(NODEPDA(i)->pdinfo); nasid = cnodeid_to_nasid(i); hubdev->max_segment_number = 0xffffffff; diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c index 6f8c5883716b..0fb579ef18c2 100644 --- a/arch/ia64/sn/kernel/setup.c +++ b/arch/ia64/sn/kernel/setup.c @@ -59,8 +59,6 @@ DEFINE_PER_CPU(struct pda_s, pda_percpu); #define MAX_PHYS_MEMORY (1UL << IA64_MAX_PHYS_BITS) /* Max physical address supported */ -lboard_t *root_lboard[MAX_COMPACT_NODES]; - extern void bte_init_node(nodepda_t *, cnodeid_t); extern void sn_timer_init(void); @@ -97,15 +95,15 @@ u8 sn_region_size; EXPORT_SYMBOL(sn_region_size); int sn_prom_type; /* 0=hardware, 1=medusa/realprom, 2=medusa/fakeprom */ -short physical_node_map[MAX_PHYSNODE_ID]; +short physical_node_map[MAX_NUMALINK_NODES]; static unsigned long sn_prom_features[MAX_PROM_FEATURE_SETS]; EXPORT_SYMBOL(physical_node_map); -int numionodes; +int num_cnodes; static void sn_init_pdas(char **); -static void scan_for_ionodes(void); +static void build_cnode_tables(void); static nodepda_t *nodepdaindr[MAX_COMPACT_NODES]; @@ -139,19 +137,6 @@ extern char drive_info[4 * 16]; char drive_info[4 * 16]; #endif -/* - * Get nasid of current cpu early in boot before nodepda is initialized - */ -static int -boot_get_nasid(void) -{ - int nasid; - - if (ia64_sn_get_sapic_info(get_sapicid(), &nasid, NULL, NULL)) - BUG(); - return nasid; -} - /* * This routine can only be used during init, since * smp_boot_data is an init data structure. @@ -223,7 +208,6 @@ void __init early_sn_setup(void) } extern int platform_intr_list[]; -extern nasid_t master_nasid; static int __initdata shub_1_1_found = 0; /* @@ -269,7 +253,6 @@ static void __init sn_check_for_wars(void) void __init sn_setup(char **cmdline_p) { long status, ticks_per_sec, drift; - int pxm; u32 version = sn_sal_rev(); extern void sn_cpu_init(void); @@ -300,11 +283,10 @@ void __init sn_setup(char **cmdline_p) MAX_DMA_ADDRESS = PAGE_OFFSET + MAX_PHYS_MEMORY; - memset(physical_node_map, -1, sizeof(physical_node_map)); - for (pxm = 0; pxm < MAX_PXM_DOMAINS; pxm++) - if (pxm_to_nid_map[pxm] != -1) - physical_node_map[pxm_to_nasid(pxm)] = - pxm_to_nid_map[pxm]; + /* + * Build the tables for managing cnodes. + */ + build_cnode_tables(); /* * Old PROMs do not provide an ACPI FADT. Disable legacy keyboard @@ -319,8 +301,6 @@ void __init sn_setup(char **cmdline_p) printk("SGI SAL version %x.%02x\n", version >> 8, version & 0x00FF); - master_nasid = boot_get_nasid(); - status = ia64_sal_freq_base(SAL_FREQ_BASE_REALTIME_CLOCK, &ticks_per_sec, &drift); @@ -378,15 +358,6 @@ static void __init sn_init_pdas(char **cmdline_p) { cnodeid_t cnode; - memset(sn_cnodeid_to_nasid, -1, - sizeof(__ia64_per_cpu_var(__sn_cnodeid_to_nasid))); - for_each_online_node(cnode) - sn_cnodeid_to_nasid[cnode] = - pxm_to_nasid(nid_to_pxm_map[cnode]); - - numionodes = num_online_nodes(); - scan_for_ionodes(); - /* * Allocate & initalize the nodepda for each node. */ @@ -402,7 +373,7 @@ static void __init sn_init_pdas(char **cmdline_p) /* * Allocate & initialize nodepda for TIOs. For now, put them on node 0. */ - for (cnode = num_online_nodes(); cnode < numionodes; cnode++) { + for (cnode = num_online_nodes(); cnode < num_cnodes; cnode++) { nodepdaindr[cnode] = alloc_bootmem_node(NODE_DATA(0), sizeof(nodepda_t)); memset(nodepdaindr[cnode], 0, sizeof(nodepda_t)); @@ -411,7 +382,7 @@ static void __init sn_init_pdas(char **cmdline_p) /* * Now copy the array of nodepda pointers to each nodepda. */ - for (cnode = 0; cnode < numionodes; cnode++) + for (cnode = 0; cnode < num_cnodes; cnode++) memcpy(nodepdaindr[cnode]->pernode_pdaindr, nodepdaindr, sizeof(nodepdaindr)); @@ -428,7 +399,7 @@ static void __init sn_init_pdas(char **cmdline_p) * Initialize the per node hubdev. This includes IO Nodes and * headless/memless nodes. */ - for (cnode = 0; cnode < numionodes; cnode++) { + for (cnode = 0; cnode < num_cnodes; cnode++) { hubdev_init_node(nodepdaindr[cnode], cnode); } } @@ -553,87 +524,58 @@ void __init sn_cpu_init(void) } /* - * Scan klconfig for ionodes. Add the nasids to the - * physical_node_map and the pda and increment numionodes. + * Build tables for converting between NASIDs and cnodes. */ +static inline int __init board_needs_cnode(int type) +{ + return (type == KLTYPE_SNIA || type == KLTYPE_TIO); +} -static void __init scan_for_ionodes(void) +void __init build_cnode_tables(void) { - int nasid = 0; + int nasid; + int node; lboard_t *brd; - /* fakeprom does not support klgraph */ - if (IS_RUNNING_ON_FAKE_PROM()) - return; - - /* Setup ionodes with memory */ - for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) { - char *klgraph_header; - cnodeid_t cnodeid; - - if (physical_node_map[nasid] == -1) - continue; + memset(physical_node_map, -1, sizeof(physical_node_map)); + memset(sn_cnodeid_to_nasid, -1, + sizeof(__ia64_per_cpu_var(__sn_cnodeid_to_nasid))); - cnodeid = -1; - klgraph_header = __va(ia64_sn_get_klconfig_addr(nasid)); - if (!klgraph_header) { - BUG(); /* All nodes must have klconfig tables! */ - } - cnodeid = nasid_to_cnodeid(nasid); - root_lboard[cnodeid] = (lboard_t *) - NODE_OFFSET_TO_LBOARD((nasid), - ((kl_config_hdr_t - *) (klgraph_header))-> - ch_board_info); + /* + * First populate the tables with C/M bricks. This ensures that + * cnode == node for all C & M bricks. + */ + for_each_online_node(node) { + nasid = pxm_to_nasid(nid_to_pxm_map[node]); + sn_cnodeid_to_nasid[node] = nasid; + physical_node_map[nasid] = node; } - /* Scan headless/memless IO Nodes. */ - for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) { - /* if there's no nasid, don't try to read the klconfig on the node */ - if (physical_node_map[nasid] == -1) - continue; - brd = find_lboard_any((lboard_t *) - root_lboard[nasid_to_cnodeid(nasid)], - KLTYPE_SNIA); - if (brd) { - brd = KLCF_NEXT_ANY(brd); /* Skip this node's lboard */ - if (!brd) - continue; - } - - brd = find_lboard_any(brd, KLTYPE_SNIA); + /* + * num_cnodes is total number of C/M/TIO bricks. Because of the 256 node + * limit on the number of nodes, we can't use the generic node numbers + * for this. Note that num_cnodes is incremented below as TIOs or + * headless/memoryless nodes are discovered. + */ + num_cnodes = num_online_nodes(); - while (brd) { - sn_cnodeid_to_nasid[numionodes] = brd->brd_nasid; - physical_node_map[brd->brd_nasid] = numionodes; - root_lboard[numionodes] = brd; - numionodes++; - brd = KLCF_NEXT_ANY(brd); - if (!brd) - break; - - brd = find_lboard_any(brd, KLTYPE_SNIA); - } - } + /* fakeprom does not support klgraph */ + if (IS_RUNNING_ON_FAKE_PROM()) + return; - /* Scan for TIO nodes. */ - for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) { - /* if there's no nasid, don't try to read the klconfig on the node */ - if (physical_node_map[nasid] == -1) - continue; - brd = find_lboard_any((lboard_t *) - root_lboard[nasid_to_cnodeid(nasid)], - KLTYPE_TIO); + /* Find TIOs & headless/memoryless nodes and add them to the tables */ + for_each_online_node(node) { + kl_config_hdr_t *klgraph_header; + nasid = cnodeid_to_nasid(node); + if ((klgraph_header = ia64_sn_get_klconfig_addr(nasid)) == NULL) + BUG(); + brd = NODE_OFFSET_TO_LBOARD(nasid, klgraph_header->ch_board_info); while (brd) { - sn_cnodeid_to_nasid[numionodes] = brd->brd_nasid; - physical_node_map[brd->brd_nasid] = numionodes; - root_lboard[numionodes] = brd; - numionodes++; - brd = KLCF_NEXT_ANY(brd); - if (!brd) - break; - - brd = find_lboard_any(brd, KLTYPE_TIO); + if (board_needs_cnode(brd->brd_type) && physical_node_map[brd->brd_nasid] < 0) { + sn_cnodeid_to_nasid[num_cnodes] = brd->brd_nasid; + physical_node_map[brd->brd_nasid] = num_cnodes++; + } + brd = find_lboard_next(brd); } } } diff --git a/arch/ia64/sn/kernel/sn2/sn_hwperf.c b/arch/ia64/sn/kernel/sn2/sn_hwperf.c index 0513aacac8c1..6c6fbca3229c 100644 --- a/arch/ia64/sn/kernel/sn2/sn_hwperf.c +++ b/arch/ia64/sn/kernel/sn2/sn_hwperf.c @@ -476,8 +476,8 @@ static int sn_topology_show(struct seq_file *s, void *d) for_each_online_cpu(j) { seq_printf(s, j ? ":%d" : ", dist %d", node_distance( - cpuid_to_cnodeid(i), - cpuid_to_cnodeid(j))); + cpu_to_node(i), + cpu_to_node(j))); } seq_putc(s, '\n'); } diff --git a/arch/ia64/sn/kernel/tiocx.c b/arch/ia64/sn/kernel/tiocx.c index b45db5133f55..7e9764a69dc8 100644 --- a/arch/ia64/sn/kernel/tiocx.c +++ b/arch/ia64/sn/kernel/tiocx.c @@ -486,11 +486,10 @@ static int __init tiocx_init(void) bus_register(&tiocx_bus_type); - for (cnodeid = 0; cnodeid < MAX_COMPACT_NODES; cnodeid++) { + for (cnodeid = 0; cnodeid < num_cnodes; cnodeid++) { nasid_t nasid; - if ((nasid = cnodeid_to_nasid(cnodeid)) < 0) - break; /* No more nasids .. bail out of loop */ + nasid = cnodeid_to_nasid(cnodeid); if ((nasid & 0x1) && is_fpga_brick(nasid)) { struct hubdev_info *hubdev; diff --git a/arch/ia64/sn/kernel/xpc_partition.c b/arch/ia64/sn/kernel/xpc_partition.c index 578265ea9e67..72ef330fb784 100644 --- a/arch/ia64/sn/kernel/xpc_partition.c +++ b/arch/ia64/sn/kernel/xpc_partition.c @@ -44,7 +44,7 @@ static u64 xpc_sh2_IPI_access3; /* original protection values for each node */ -u64 xpc_prot_vec[MAX_COMPACT_NODES]; +u64 xpc_prot_vec[MAX_NUMNODES]; /* this partition's reserved page */ -- cgit v1.2.2 From 54703d3678d13e7406d0b5aa451abb9526d53b9d Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Wed, 14 Sep 2005 10:33:40 -0500 Subject: [IA64] Increase max NR_CPUS on IA64 from 512 to 1024 This patch increases the maximum number of cpus supported on IA64 to 1024. No changes are made to the default SSI size. The patch simply allows specifying up to 1024p. There are certainly scaling (& other) issues that also need to be addressed!!! Additional patches will follow..... Signed-off-by: Jack Steiner Signed-off-by: Tony Luck --- arch/ia64/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 945c15a0722b..cb7fc19ff080 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -254,8 +254,8 @@ config SMP If you don't know what to do here, say N. config NR_CPUS - int "Maximum number of CPUs (2-512)" - range 2 512 + int "Maximum number of CPUs (2-1024)" + range 2 1024 depends on SMP default "64" help -- cgit v1.2.2 From be379124c0a5abfbe57dab2823fe8a71ce797aee Mon Sep 17 00:00:00 2001 From: Khalid Aziz Date: Mon, 19 Sep 2005 15:42:36 -0700 Subject: [IA64] include EFI memory information in /proc/iomem User mode kexec tools expect to find information about physical memory in /proc/iomem (as they do on x86) to validate the addresses that the new kernel will use. Signed-off-by: Khalid Aziz Signed-off-by: Tony Luck --- arch/ia64/kernel/efi.c | 87 ++++++++++++++++++++++++++++++++++++++++++++++++ arch/ia64/kernel/setup.c | 29 ++++++++++++++++ 2 files changed, 116 insertions(+) (limited to 'arch') diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c index 1291db581721..f72ea6aebcb1 100644 --- a/arch/ia64/kernel/efi.c +++ b/arch/ia64/kernel/efi.c @@ -923,3 +923,90 @@ efi_memmap_init(unsigned long *s, unsigned long *e) *s = (u64)kern_memmap; *e = (u64)++k; } + +void +efi_initialize_iomem_resources(struct resource *code_resource, + struct resource *data_resource) +{ + struct resource *res; + void *efi_map_start, *efi_map_end, *p; + efi_memory_desc_t *md; + u64 efi_desc_size; + char *name; + unsigned long flags; + + efi_map_start = __va(ia64_boot_param->efi_memmap); + efi_map_end = efi_map_start + ia64_boot_param->efi_memmap_size; + efi_desc_size = ia64_boot_param->efi_memdesc_size; + + res = NULL; + + for (p = efi_map_start; p < efi_map_end; p += efi_desc_size) { + md = p; + + if (md->num_pages == 0) /* should not happen */ + continue; + + flags = IORESOURCE_MEM; + switch (md->type) { + + case EFI_MEMORY_MAPPED_IO: + case EFI_MEMORY_MAPPED_IO_PORT_SPACE: + continue; + + case EFI_LOADER_CODE: + case EFI_LOADER_DATA: + case EFI_BOOT_SERVICES_DATA: + case EFI_BOOT_SERVICES_CODE: + case EFI_CONVENTIONAL_MEMORY: + if (md->attribute & EFI_MEMORY_WP) { + name = "System ROM"; + flags |= IORESOURCE_READONLY; + } else { + name = "System RAM"; + } + break; + + case EFI_ACPI_MEMORY_NVS: + name = "ACPI Non-volatile Storage"; + flags |= IORESOURCE_BUSY; + break; + + case EFI_UNUSABLE_MEMORY: + name = "reserved"; + flags |= IORESOURCE_BUSY | IORESOURCE_DISABLED; + break; + + case EFI_RESERVED_TYPE: + case EFI_RUNTIME_SERVICES_CODE: + case EFI_RUNTIME_SERVICES_DATA: + case EFI_ACPI_RECLAIM_MEMORY: + default: + name = "reserved"; + flags |= IORESOURCE_BUSY; + break; + } + + if ((res = kcalloc(1, sizeof(struct resource), GFP_KERNEL)) == NULL) { + printk(KERN_ERR "failed to alocate resource for iomem\n"); + return; + } + + res->name = name; + res->start = md->phys_addr; + res->end = md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT) - 1; + res->flags = flags; + + if (insert_resource(&iomem_resource, res) < 0) + kfree(res); + else { + /* + * We don't know which region contains + * kernel data so we try it repeatedly and + * let the resource manager test it. + */ + insert_resource(res, code_resource); + insert_resource(res, data_resource); + } + } +} diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index 1658d687b79c..83b37c410ccd 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -78,6 +78,19 @@ struct screen_info screen_info; unsigned long vga_console_iobase; unsigned long vga_console_membase; +static struct resource data_resource = { + .name = "Kernel data", + .flags = IORESOURCE_BUSY | IORESOURCE_MEM +}; + +static struct resource code_resource = { + .name = "Kernel code", + .flags = IORESOURCE_BUSY | IORESOURCE_MEM +}; +extern void efi_initialize_iomem_resources(struct resource *, + struct resource *); +extern char _text[], _edata[], _etext[]; + unsigned long ia64_max_cacheline_size; unsigned long ia64_iobase; /* virtual address for I/O accesses */ EXPORT_SYMBOL(ia64_iobase); @@ -171,6 +184,22 @@ sort_regions (struct rsvd_region *rsvd_region, int max) } } +/* + * Request address space for all standard resources + */ +static int __init register_memory(void) +{ + code_resource.start = ia64_tpa(_text); + code_resource.end = ia64_tpa(_etext) - 1; + data_resource.start = ia64_tpa(_etext); + data_resource.end = ia64_tpa(_edata) - 1; + efi_initialize_iomem_resources(&code_resource, &data_resource); + + return 0; +} + +__initcall(register_memory); + /** * reserve_memory - setup reserved memory areas * -- cgit v1.2.2 From 44c451208da397438e7062393aeb3a19ddb76a60 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 16 Sep 2005 11:43:10 -0600 Subject: [IA64] ia64: add ar.k0 usage note Update comment about how ar.k0 is used. Make the initialization the same as in start_secondary() (no functional change, just make it look more similar). Signed-off-by: Bjorn Helgaas Signed-off-by: Tony Luck --- arch/ia64/kernel/setup.c | 29 ++++++++++++++++------------- 1 file changed, 16 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index 1f5c26dbe705..e256b114bf4e 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -244,28 +244,31 @@ find_initrd (void) static void __init io_port_init (void) { - extern unsigned long ia64_iobase; unsigned long phys_iobase; /* - * Set `iobase' to the appropriate address in region 6 (uncached access range). + * Set `iobase' based on the EFI memory map or, failing that, the + * value firmware left in ar.k0. * - * The EFI memory map is the "preferred" location to get the I/O port space base, - * rather the relying on AR.KR0. This should become more clear in future SAL - * specs. We'll fall back to getting it out of AR.KR0 if no appropriate entry is - * found in the memory map. + * Note that in ia32 mode, IN/OUT instructions use ar.k0 to compute + * the port's virtual address, so ia32_load_state() loads it with a + * user virtual address. But in ia64 mode, glibc uses the + * *physical* address in ar.k0 to mmap the appropriate area from + * /dev/mem, and the inX()/outX() interfaces use MMIO. In both + * cases, user-mode can only use the legacy 0-64K I/O port space. + * + * ar.k0 is not involved in kernel I/O port accesses, which can use + * any of the I/O port spaces and are done via MMIO using the + * virtual mmio_base from the appropriate io_space[]. */ phys_iobase = efi_get_iobase(); - if (phys_iobase) - /* set AR.KR0 since this is all we use it for anyway */ - ia64_set_kr(IA64_KR_IO_BASE, phys_iobase); - else { + if (!phys_iobase) { phys_iobase = ia64_get_kr(IA64_KR_IO_BASE); - printk(KERN_INFO "No I/O port range found in EFI memory map, falling back " - "to AR.KR0\n"); - printk(KERN_INFO "I/O port base = 0x%lx\n", phys_iobase); + printk(KERN_INFO "No I/O port range found in EFI memory map, " + "falling back to AR.KR0 (0x%lx)\n", phys_iobase); } ia64_iobase = (unsigned long) ioremap(phys_iobase, 0); + ia64_set_kr(IA64_KR_IO_BASE, __pa(ia64_iobase)); /* setup legacy IO port space */ io_space[0].mmio_base = ia64_iobase; -- cgit v1.2.2 From 650316f1228c0dc5e45c17765caef30db62468cd Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 16 Sep 2005 11:43:45 -0600 Subject: [IA64] move ACPI IOSAPIC locality domain mapping from pci.c to acpi.c Move acpi_map_iosapics() from pci.c to acpi.c, since it doesn't have anything to do with PCI. Signed-off-by: Bjorn Helgaas Signed-off-by: Tony Luck --- arch/ia64/kernel/acpi.c | 13 +++++++++++-- arch/ia64/pci/pci.c | 23 ----------------------- 2 files changed, 11 insertions(+), 25 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 7e926471e4ec..9ad94ddf6687 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -838,7 +838,7 @@ EXPORT_SYMBOL(acpi_unmap_lsapic); #endif /* CONFIG_ACPI_HOTPLUG_CPU */ #ifdef CONFIG_ACPI_NUMA -acpi_status __devinit +static acpi_status __devinit acpi_map_iosapic(acpi_handle handle, u32 depth, void *context, void **ret) { struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; @@ -890,7 +890,16 @@ acpi_map_iosapic(acpi_handle handle, u32 depth, void *context, void **ret) map_iosapic_to_node(gsi_base, node); return AE_OK; } -#endif /* CONFIG_NUMA */ + +static int __init +acpi_map_iosapics (void) +{ + acpi_get_devices(NULL, acpi_map_iosapic, NULL, NULL); + return 0; +} + +fs_initcall(acpi_map_iosapics); +#endif /* CONFIG_ACPI_NUMA */ int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base) { diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index 9b5de589b82f..6bf48d7842c6 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -120,29 +120,6 @@ struct pci_ops pci_root_ops = { .write = pci_write, }; -#ifdef CONFIG_NUMA -extern acpi_status acpi_map_iosapic(acpi_handle, u32, void *, void **); -static void acpi_map_iosapics(void) -{ - acpi_get_devices(NULL, acpi_map_iosapic, NULL, NULL); -} -#else -static void acpi_map_iosapics(void) -{ - return; -} -#endif /* CONFIG_NUMA */ - -static int __init -pci_acpi_init (void) -{ - acpi_map_iosapics(); - - return 0; -} - -subsys_initcall(pci_acpi_init); - /* Called by ACPI when it finds a new root bus. */ static struct pci_controller * __devinit -- cgit v1.2.2 From 463eb297401eeb174db3fdf37a87911b576b3993 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 23 Sep 2005 11:39:07 -0600 Subject: [IA64] respect ACPI producer/consumer flag for PCI root bridges Address space resources for ACPI devices have a producer/consumer flag. All devices "consume" the indicated address space. If the resource is marked as a "producer", the range is also passed on to child devices. We currently ignore this flag when setting up MMIO and I/O port windows for PCI root bridges, so we could mistakenly interpret a "consumed-only" range, like CSR space for the device itself, as a window that is routed to children. Signed-off-by: Bjorn Helgaas Signed-off-by: Tony Luck --- arch/ia64/pci/pci.c | 35 +++++++++++++++++++++++++++-------- 1 file changed, 27 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index 9b5de589b82f..564319e29bd5 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -191,6 +191,29 @@ add_io_space (struct acpi_resource_address64 *addr) return IO_SPACE_BASE(i); } +static acpi_status __devinit resource_to_window(struct acpi_resource *resource, + struct acpi_resource_address64 *addr) +{ + acpi_status status; + + /* + * We're only interested in _CRS descriptors that are + * - address space descriptors for memory or I/O space + * - non-zero size + * - producers, i.e., the address space is routed downstream, + * not consumed by the bridge itself + */ + status = acpi_resource_to_address64(resource, addr); + if (ACPI_SUCCESS(status) && + (addr->resource_type == ACPI_MEMORY_RANGE || + addr->resource_type == ACPI_IO_RANGE) && + addr->address_length && + addr->producer_consumer == ACPI_PRODUCER) + return AE_OK; + + return AE_ERROR; +} + static acpi_status __devinit count_window (struct acpi_resource *resource, void *data) { @@ -198,11 +221,9 @@ count_window (struct acpi_resource *resource, void *data) struct acpi_resource_address64 addr; acpi_status status; - status = acpi_resource_to_address64(resource, &addr); + status = resource_to_window(resource, &addr); if (ACPI_SUCCESS(status)) - if (addr.resource_type == ACPI_MEMORY_RANGE || - addr.resource_type == ACPI_IO_RANGE) - (*windows)++; + (*windows)++; return AE_OK; } @@ -221,13 +242,11 @@ static __devinit acpi_status add_window(struct acpi_resource *res, void *data) unsigned long flags, offset = 0; struct resource *root; - status = acpi_resource_to_address64(res, &addr); + /* Return AE_OK for non-window resources to keep scanning for more */ + status = resource_to_window(res, &addr); if (!ACPI_SUCCESS(status)) return AE_OK; - if (!addr.address_length) - return AE_OK; - if (addr.resource_type == ACPI_MEMORY_RANGE) { flags = IORESOURCE_MEM; root = &iomem_resource; -- cgit v1.2.2 From 61b9cf7c6cf5077c40ad37480fa56f6574af3db5 Mon Sep 17 00:00:00 2001 From: Mark Maule Date: Fri, 23 Sep 2005 12:31:53 -0500 Subject: [IA64-SGI] fix sn_pci_legacy_read/fix sn_pci_legacy_write This patch adds a #define for SN_SAL_IOIF_PCI_SAFE and makes that the preferred method of implementing sn_pci_legacy_read() and sn_pci_legacy_write(). This SAL call has been present in SGI proms since version 4.10. If the SN_SAL_IOIF_PCI_SAFE call fails, revert to the previous code for compatability with older proms. Signed-off-by: Mark Maule Signed-off-by: Tony Luck --- arch/ia64/sn/pci/pci_dma.c | 46 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+) (limited to 'arch') diff --git a/arch/ia64/sn/pci/pci_dma.c b/arch/ia64/sn/pci/pci_dma.c index 0e4b9ad9ef02..abdf6eea6ac8 100644 --- a/arch/ia64/sn/pci/pci_dma.c +++ b/arch/ia64/sn/pci/pci_dma.c @@ -326,6 +326,29 @@ int sn_pci_legacy_read(struct pci_bus *bus, u16 port, u32 *val, u8 size) { unsigned long addr; int ret; + struct ia64_sal_retval isrv; + + /* + * First, try the SN_SAL_IOIF_PCI_SAFE SAL call which can work + * around hw issues at the pci bus level. SGI proms older than + * 4.10 don't implment this. + */ + + SAL_CALL(isrv, SN_SAL_IOIF_PCI_SAFE, + pci_domain_nr(bus), bus->number, + 0, /* io */ + 0, /* read */ + port, size, __pa(val)); + + if (isrv.status == 0) + return size; + + /* + * If the above failed, retry using the SAL_PROBE call which should + * be present in all proms (but which cannot work round PCI chipset + * bugs). This code is retained for compatability with old + * pre-4.10 proms, and should be removed at some point in the future. + */ if (!SN_PCIBUS_BUSSOFT(bus)) return -ENODEV; @@ -349,6 +372,29 @@ int sn_pci_legacy_write(struct pci_bus *bus, u16 port, u32 val, u8 size) int ret = size; unsigned long paddr; unsigned long *addr; + struct ia64_sal_retval isrv; + + /* + * First, try the SN_SAL_IOIF_PCI_SAFE SAL call which can work + * around hw issues at the pci bus level. SGI proms older than + * 4.10 don't implment this. + */ + + SAL_CALL(isrv, SN_SAL_IOIF_PCI_SAFE, + pci_domain_nr(bus), bus->number, + 0, /* io */ + 1, /* write */ + port, size, __pa(&val)); + + if (isrv.status == 0) + return size; + + /* + * If the above failed, retry using the SAL_PROBE call which should + * be present in all proms (but which cannot work round PCI chipset + * bugs). This code is retained for compatability with old + * pre-4.10 proms, and should be removed at some point in the future. + */ if (!SN_PCIBUS_BUSSOFT(bus)) { ret = -ENODEV; -- cgit v1.2.2 From d719948e623622cf9fc8016f7ec63422d929eb3b Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Wed, 28 Sep 2005 16:09:46 -0700 Subject: [IA64] end of kernel 'data' is at _end, not _edata /proc/iomem describes a block of memory as "Kernel data", but the end address is derived from "_edata". The kernel actually has many other sections beyond _edata. Get the real end address from _end. Acked-by: Khalid Aziz Signed-off-by: Tony Luck --- arch/ia64/kernel/setup.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index 83b37c410ccd..3e9b797e6588 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -89,7 +89,7 @@ static struct resource code_resource = { }; extern void efi_initialize_iomem_resources(struct resource *, struct resource *); -extern char _text[], _edata[], _etext[]; +extern char _text[], _end[], _etext[]; unsigned long ia64_max_cacheline_size; unsigned long ia64_iobase; /* virtual address for I/O accesses */ @@ -192,7 +192,7 @@ static int __init register_memory(void) code_resource.start = ia64_tpa(_text); code_resource.end = ia64_tpa(_etext) - 1; data_resource.start = ia64_tpa(_etext); - data_resource.end = ia64_tpa(_edata) - 1; + data_resource.end = ia64_tpa(_end) - 1; efi_initialize_iomem_resources(&code_resource, &data_resource); return 0; -- cgit v1.2.2 From da9577c531f17f744f3eab40f700e07933d26361 Mon Sep 17 00:00:00 2001 From: Bob Picco Date: Tue, 4 Oct 2005 15:13:37 -0400 Subject: [PATCH] V5 ia64 SPARSEMEM - Kconfig and Makefile The patch modifies the Kconfig file to introduce the new memory model options and other related SPARSEMEM changes. There is also a minor change in the Makefile. Signed-off-by: Bob Picco Signed-off-by: Tony Luck --- arch/ia64/Kconfig | 94 ++++++++++++++++++++++++++++++--------------------- arch/ia64/mm/Makefile | 5 ++- 2 files changed, 58 insertions(+), 41 deletions(-) (limited to 'arch') diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 945c15a0722b..a86236d6ba5d 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -63,8 +63,6 @@ config IA64_GENERIC select ACPI select NUMA select ACPI_NUMA - select VIRTUAL_MEM_MAP - select DISCONTIGMEM help This selects the system type of your hardware. A "generic" kernel will run on any supported IA-64 system. However, if you configure @@ -176,40 +174,6 @@ config IA64_L1_CACHE_SHIFT default "6" if ITANIUM # align cache-sensitive data to 64 bytes -config NUMA - bool "NUMA support" - depends on !IA64_HP_SIM - default y if IA64_SGI_SN2 - select ACPI_NUMA - help - Say Y to compile the kernel to support NUMA (Non-Uniform Memory - Access). This option is for configuring high-end multiprocessor - server systems. If in doubt, say N. - -config VIRTUAL_MEM_MAP - bool "Virtual mem map" - default y if !IA64_HP_SIM - help - Say Y to compile the kernel with support for a virtual mem map. - This code also only takes effect if a memory hole of greater than - 1 Gb is found during boot. You must turn this option on if you - require the DISCONTIGMEM option for your machine. If you are - unsure, say Y. - -config HOLES_IN_ZONE - bool - default y if VIRTUAL_MEM_MAP - -config ARCH_DISCONTIGMEM_ENABLE - bool "Discontiguous memory support" - depends on (IA64_DIG || IA64_SGI_SN2 || IA64_GENERIC || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB) && NUMA && VIRTUAL_MEM_MAP - default y if (IA64_SGI_SN2 || IA64_GENERIC) && NUMA - help - Say Y to support efficient handling of discontiguous physical memory, - for architectures which are either NUMA (Non-Uniform Memory Access) - or have huge holes in the physical address space for other reasons. - See for more. - config IA64_CYCLONE bool "Cyclone (EXA) Time Source support" help @@ -232,8 +196,10 @@ config IA64_SGI_SN_XP based on a network adapter and DMA messaging. config FORCE_MAX_ZONEORDER - int - default "18" + int "MAX_ORDER (11 - 17)" if !HUGETLB_PAGE + range 11 17 if !HUGETLB_PAGE + default "17" if HUGETLB_PAGE + default "11" config SMP bool "Symmetric multi-processing support" @@ -298,6 +264,58 @@ config PREEMPT source "mm/Kconfig" +config ARCH_SELECT_MEMORY_MODEL + def_bool y + +config ARCH_DISCONTIGMEM_ENABLE + def_bool y + help + Say Y to support efficient handling of discontiguous physical memory, + for architectures which are either NUMA (Non-Uniform Memory Access) + or have huge holes in the physical address space for other reasons. + See for more. + +config ARCH_FLATMEM_ENABLE + def_bool y + +config ARCH_SPARSEMEM_ENABLE + def_bool y + depends on ARCH_DISCONTIGMEM_ENABLE + +config ARCH_DISCONTIGMEM_DEFAULT + def_bool y if (IA64_SGI_SN2 || IA64_GENERIC || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB) + depends on ARCH_DISCONTIGMEM_ENABLE + +config NUMA + bool "NUMA support" + depends on !IA64_HP_SIM && !FLATMEM + default y if IA64_SGI_SN2 + help + Say Y to compile the kernel to support NUMA (Non-Uniform Memory + Access). This option is for configuring high-end multiprocessor + server systems. If in doubt, say N. + +# VIRTUAL_MEM_MAP and FLAT_NODE_MEM_MAP are functionally equivalent. +# VIRTUAL_MEM_MAP has been retained for historical reasons. +config VIRTUAL_MEM_MAP + bool "Virtual mem map" + depends on !SPARSEMEM + default y if !IA64_HP_SIM + help + Say Y to compile the kernel with support for a virtual mem map. + This code also only takes effect if a memory hole of greater than + 1 Gb is found during boot. You must turn this option on if you + require the DISCONTIGMEM option for your machine. If you are + unsure, say Y. + +config HOLES_IN_ZONE + bool + default y if VIRTUAL_MEM_MAP + +config HAVE_ARCH_EARLY_PFN_TO_NID + def_bool y + depends on NEED_MULTIPLE_NODES + config IA32_SUPPORT bool "Support for Linux/x86 binaries" help diff --git a/arch/ia64/mm/Makefile b/arch/ia64/mm/Makefile index 7078f67887ec..d78d20f0a0f0 100644 --- a/arch/ia64/mm/Makefile +++ b/arch/ia64/mm/Makefile @@ -7,6 +7,5 @@ obj-y := init.o fault.o tlb.o extable.o obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o obj-$(CONFIG_NUMA) += numa.o obj-$(CONFIG_DISCONTIGMEM) += discontig.o -ifndef CONFIG_DISCONTIGMEM -obj-y += contig.o -endif +obj-$(CONFIG_SPARSEMEM) += discontig.o +obj-$(CONFIG_FLATMEM) += contig.o -- cgit v1.2.2 From c678796cab4b5288ad578802a54cb1480ae20a08 Mon Sep 17 00:00:00 2001 From: Bob Picco Date: Tue, 4 Oct 2005 15:13:44 -0400 Subject: [PATCH] V5 ia64 SPARSEMEM - eliminate contig_page_data For FLATMEM contig_page_data has been made transparent to the arch code. This patch conforms to that change. Signed-off-by: Bob Picco Signed-off-by: Tony Luck --- arch/ia64/mm/contig.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c index 91a055f5731f..acaaec4e4681 100644 --- a/arch/ia64/mm/contig.c +++ b/arch/ia64/mm/contig.c @@ -269,7 +269,7 @@ paging_init (void) efi_memmap_walk(find_largest_hole, (u64 *)&max_gap); if (max_gap < LARGE_GAP) { vmem_map = (struct page *) 0; - free_area_init_node(0, &contig_page_data, zones_size, 0, + free_area_init_node(0, NODE_DATA(0), zones_size, 0, zholes_size); } else { unsigned long map_size; @@ -282,7 +282,7 @@ paging_init (void) efi_memmap_walk(create_mem_map_page_table, NULL); NODE_DATA(0)->node_mem_map = vmem_map; - free_area_init_node(0, &contig_page_data, zones_size, + free_area_init_node(0, NODE_DATA(0), zones_size, 0, zholes_size); printk("Virtual mem_map starts at 0x%p\n", mem_map); -- cgit v1.2.2 From 2d4b1fa234417b902c9d3034442387c1805bfa7b Mon Sep 17 00:00:00 2001 From: Bob Picco Date: Tue, 4 Oct 2005 15:13:57 -0400 Subject: [PATCH] V5 ia64 SPARSEMEM - SPARSEMEM code changes This patch is the minimal set of changes required by ia64 to use SPARSEMEM. Signed-off-by: Bob Picco Signed-off-by: Tony Luck --- arch/ia64/mm/discontig.c | 43 +++++++++++++++++++++++++++++++++++++++++-- arch/ia64/mm/init.c | 2 +- arch/ia64/mm/numa.c | 24 ++++++++++++++++++++++++ 3 files changed, 66 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c index b5c90e548195..a3788fb84809 100644 --- a/arch/ia64/mm/discontig.c +++ b/arch/ia64/mm/discontig.c @@ -421,6 +421,37 @@ static void __init memory_less_nodes(void) return; } +#ifdef CONFIG_SPARSEMEM +/** + * register_sparse_mem - notify SPARSEMEM that this memory range exists. + * @start: physical start of range + * @end: physical end of range + * @arg: unused + * + * Simply calls SPARSEMEM to register memory section(s). + */ +static int __init register_sparse_mem(unsigned long start, unsigned long end, + void *arg) +{ + int nid; + + start = __pa(start) >> PAGE_SHIFT; + end = __pa(end) >> PAGE_SHIFT; + nid = early_pfn_to_nid(start); + memory_present(nid, start, end); + + return 0; +} + +static void __init arch_sparse_init(void) +{ + efi_memmap_walk(register_sparse_mem, NULL); + sparse_init(); +} +#else +#define arch_sparse_init() do {} while (0) +#endif + /** * find_memory - walk the EFI memory map and setup the bootmem allocator * @@ -528,8 +559,10 @@ void show_mem(void) int shared = 0, cached = 0, reserved = 0; printk("Node ID: %d\n", pgdat->node_id); for(i = 0; i < pgdat->node_spanned_pages; i++) { - struct page *page = pgdat_page_nr(pgdat, i); - if (!ia64_pfn_valid(pgdat->node_start_pfn+i)) + struct page *page; + if (pfn_valid(pgdat->node_start_pfn + i)) + page = pfn_to_page(pgdat->node_start_pfn + i); + else continue; if (PageReserved(page)) reserved++; @@ -648,12 +681,16 @@ void __init paging_init(void) max_dma = virt_to_phys((void *) MAX_DMA_ADDRESS) >> PAGE_SHIFT; + arch_sparse_init(); + efi_memmap_walk(filter_rsvd_memory, count_node_pages); +#ifdef CONFIG_VIRTUAL_MEM_MAP vmalloc_end -= PAGE_ALIGN(max_low_pfn * sizeof(struct page)); vmem_map = (struct page *) vmalloc_end; efi_memmap_walk(create_mem_map_page_table, NULL); printk("Virtual mem_map starts at 0x%p\n", vmem_map); +#endif for_each_online_node(node) { memset(zones_size, 0, sizeof(zones_size)); @@ -690,7 +727,9 @@ void __init paging_init(void) pfn_offset = mem_data[node].min_pfn; +#ifdef CONFIG_VIRTUAL_MEM_MAP NODE_DATA(node)->node_mem_map = vmem_map + pfn_offset; +#endif free_area_init_node(node, NODE_DATA(node), zones_size, pfn_offset, zholes_size); } diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c index 1281c609ee98..98246acd4991 100644 --- a/arch/ia64/mm/init.c +++ b/arch/ia64/mm/init.c @@ -593,7 +593,7 @@ mem_init (void) platform_dma_init(); #endif -#ifndef CONFIG_DISCONTIGMEM +#ifdef CONFIG_FLATMEM if (!mem_map) BUG(); max_mapnr = max_low_pfn; diff --git a/arch/ia64/mm/numa.c b/arch/ia64/mm/numa.c index 77118bbf3d8b..4e5c8b36ad93 100644 --- a/arch/ia64/mm/numa.c +++ b/arch/ia64/mm/numa.c @@ -47,3 +47,27 @@ paddr_to_nid(unsigned long paddr) return (i < num_node_memblks) ? node_memblk[i].nid : (num_node_memblks ? -1 : 0); } + +#if defined(CONFIG_SPARSEMEM) && defined(CONFIG_NUMA) +/* + * Because of holes evaluate on section limits. + * If the section of memory exists, then return the node where the section + * resides. Otherwise return node 0 as the default. This is used by + * SPARSEMEM to allocate the SPARSEMEM sectionmap on the NUMA node where + * the section resides. + */ +int early_pfn_to_nid(unsigned long pfn) +{ + int i, section = pfn >> PFN_SECTION_SHIFT, ssec, esec; + + for (i = 0; i < num_node_memblks; i++) { + ssec = node_memblk[i].start_paddr >> PA_SECTION_SHIFT; + esec = (node_memblk[i].start_paddr + node_memblk[i].size + + ((1L << PA_SECTION_SHIFT) - 1)) >> PA_SECTION_SHIFT; + if (section >= ssec && section < esec) + return node_memblk[i].nid; + } + + return 0; +} +#endif -- cgit v1.2.2 From 1e5c936e3cc2ab745f66c0ae296c42f892ffd42a Mon Sep 17 00:00:00 2001 From: Bob Picco Date: Tue, 4 Oct 2005 15:14:05 -0400 Subject: [PATCH] V5 ia64 SPARSEMEM - gensparse_defconfig gensparse_defconfig is a config generated file for SPARSEMEM and GENERIC kernel configuration (defconfig). Signed-off-by: Bob Picco Signed-off-by: Tony Luck --- arch/ia64/configs/gensparse_defconfig | 1319 +++++++++++++++++++++++++++++++++ 1 file changed, 1319 insertions(+) create mode 100644 arch/ia64/configs/gensparse_defconfig (limited to 'arch') diff --git a/arch/ia64/configs/gensparse_defconfig b/arch/ia64/configs/gensparse_defconfig new file mode 100644 index 000000000000..80f8663bc6d9 --- /dev/null +++ b/arch/ia64/configs/gensparse_defconfig @@ -0,0 +1,1319 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc2 +# Wed Sep 28 08:27:29 2005 +# + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_STOP_MACHINE=y + +# +# Processor type and features +# +CONFIG_IA64=y +CONFIG_64BIT=y +CONFIG_MMU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_TIME_INTERPOLATION=y +CONFIG_EFI=y +CONFIG_GENERIC_IOMAP=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_IA64_GENERIC=y +# CONFIG_IA64_DIG is not set +# CONFIG_IA64_HP_ZX1 is not set +# CONFIG_IA64_HP_ZX1_SWIOTLB is not set +# CONFIG_IA64_SGI_SN2 is not set +# CONFIG_IA64_HP_SIM is not set +# CONFIG_ITANIUM is not set +CONFIG_MCKINLEY=y +# CONFIG_IA64_PAGE_SIZE_4KB is not set +# CONFIG_IA64_PAGE_SIZE_8KB is not set +CONFIG_IA64_PAGE_SIZE_16KB=y +# CONFIG_IA64_PAGE_SIZE_64KB is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_IA64_L1_CACHE_SHIFT=7 +CONFIG_IA64_CYCLONE=y +CONFIG_IOSAPIC=y +# CONFIG_IA64_SGI_SN_XP is not set +CONFIG_FORCE_MAX_ZONEORDER=17 +CONFIG_SMP=y +CONFIG_NR_CPUS=512 +CONFIG_HOTPLUG_CPU=y +# CONFIG_SCHED_SMT is not set +# CONFIG_PREEMPT is not set +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_NEED_MULTIPLE_NODES=y +CONFIG_HAVE_MEMORY_PRESENT=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_EXTREME=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y +CONFIG_NUMA=y +CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y +CONFIG_IA32_SUPPORT=y +CONFIG_COMPAT=y +CONFIG_IA64_MCA_RECOVERY=y +CONFIG_PERFMON=y +CONFIG_IA64_PALINFO=y + +# +# Firmware Drivers +# +CONFIG_EFI_VARS=y +CONFIG_EFI_PCDP=y +# CONFIG_DELL_RBU is not set +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_MISC=m + +# +# Power management and ACPI +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set + +# +# ACPI (Advanced Configuration and Power Interface) Support +# +CONFIG_ACPI=y +CONFIG_ACPI_BUTTON=m +CONFIG_ACPI_FAN=m +CONFIG_ACPI_PROCESSOR=m +CONFIG_ACPI_HOTPLUG_CPU=y +CONFIG_ACPI_THERMAL=m +CONFIG_ACPI_NUMA=y +CONFIG_ACPI_BLACKLIST_YEAR=0 +# CONFIG_ACPI_DEBUG is not set +CONFIG_ACPI_POWER=y +CONFIG_ACPI_SYSTEM=y +CONFIG_ACPI_CONTAINER=m + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Bus options (PCI, PCMCIA) +# +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCI_MSI is not set +CONFIG_PCI_LEGACY_PROC=y +# CONFIG_PCI_DEBUG is not set + +# +# PCI Hotplug Support +# +CONFIG_HOTPLUG_PCI=m +# CONFIG_HOTPLUG_PCI_FAKE is not set +CONFIG_HOTPLUG_PCI_ACPI=m +# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set +# CONFIG_HOTPLUG_PCI_CPCI is not set +# CONFIG_HOTPLUG_PCI_SHPC is not set +# CONFIG_HOTPLUG_PCI_SGI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +CONFIG_ARPD=y +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNP is not set + +# +# Block devices +# +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDETAPE is not set +CONFIG_BLK_DEV_IDEFLOPPY=y +CONFIG_BLK_DEV_IDESCSI=m +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +# CONFIG_IDEPCI_SHARE_IRQ is not set +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +CONFIG_BLK_DEV_CMD64X=y +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +CONFIG_BLK_DEV_PIIX=y +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +CONFIG_BLK_DEV_SGIIOC4=y +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=m +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=m +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +CONFIG_SCSI_SPI_ATTRS=y +CONFIG_SCSI_FC_ATTRS=y +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +CONFIG_SCSI_SATA=y +# CONFIG_SCSI_SATA_AHCI is not set +# CONFIG_SCSI_SATA_SVW is not set +# CONFIG_SCSI_ATA_PIIX is not set +# CONFIG_SCSI_SATA_MV is not set +# CONFIG_SCSI_SATA_NV is not set +# CONFIG_SCSI_SATA_PROMISE is not set +# CONFIG_SCSI_SATA_QSTOR is not set +# CONFIG_SCSI_SATA_SX4 is not set +# CONFIG_SCSI_SATA_SIL is not set +# CONFIG_SCSI_SATA_SIS is not set +# CONFIG_SCSI_SATA_ULI is not set +# CONFIG_SCSI_SATA_VIA is not set +CONFIG_SCSI_SATA_VITESSE=y +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +CONFIG_SCSI_SYM53C8XX_2=y +CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 +CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 +CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 +# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_FC is not set +CONFIG_SCSI_QLOGIC_1280=y +# CONFIG_SCSI_QLOGIC_1280_1040 is not set +CONFIG_SCSI_QLA2XXX=y +CONFIG_SCSI_QLA21XX=m +CONFIG_SCSI_QLA22XX=m +CONFIG_SCSI_QLA2300=m +CONFIG_SCSI_QLA2322=m +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +# CONFIG_MD_RAID10 is not set +CONFIG_MD_RAID5=m +CONFIG_MD_RAID6=m +CONFIG_MD_MULTIPATH=m +# CONFIG_MD_FAULTY is not set +CONFIG_BLK_DEV_DM=m +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +# CONFIG_DM_MULTIPATH_EMC is not set + +# +# Fusion MPT device support +# +CONFIG_FUSION=y +CONFIG_FUSION_SPI=y +CONFIG_FUSION_FC=m +CONFIG_FUSION_MAX_SGE=128 +# CONFIG_FUSION_CTL is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=m +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +CONFIG_NET_TULIP=y +# CONFIG_DE2104X is not set +CONFIG_TULIP=m +# CONFIG_TULIP_MWI is not set +# CONFIG_TULIP_MMIO is not set +# CONFIG_TULIP_NAPI is not set +# CONFIG_DE4X5 is not set +# CONFIG_WINBOND_840 is not set +# CONFIG_DM9102 is not set +# CONFIG_ULI526X is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +CONFIG_EEPRO100=m +CONFIG_E100=m +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +CONFIG_E1000=y +# CONFIG_E1000_NAPI is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +CONFIG_TIGON3=y +# CONFIG_BNX2 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +CONFIG_NETCONSOLE=y +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_RX is not set +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +CONFIG_GAMEPORT=m +# CONFIG_GAMEPORT_NS558 is not set +# CONFIG_GAMEPORT_L4 is not set +# CONFIG_GAMEPORT_EMU10K1 is not set +# CONFIG_GAMEPORT_FM801 is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_ROCKETPORT is not set +# CONFIG_CYCLADES is not set +# CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_SMARTIO is not set +# CONFIG_ISI is not set +# CONFIG_SYNCLINKMP is not set +# CONFIG_N_HDLC is not set +# CONFIG_SPECIALIX is not set +# CONFIG_SX is not set +# CONFIG_STALDRV is not set +CONFIG_SGI_SNSC=y +CONFIG_SGI_TIOCX=y +CONFIG_SGI_MBCS=m + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_ACPI=y +CONFIG_SERIAL_8250_NR_UARTS=6 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_SGI_L1_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_SERIAL_SGI_IOC4=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set +CONFIG_EFI_RTC=y +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +CONFIG_AGP=m +CONFIG_AGP_I460=m +CONFIG_AGP_HP_ZX1=m +CONFIG_AGP_SGI_TIOCA=m +CONFIG_DRM=m +CONFIG_DRM_TDFX=m +CONFIG_DRM_R128=m +CONFIG_DRM_RADEON=m +CONFIG_DRM_MGA=m +CONFIG_DRM_SIS=m +# CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set +CONFIG_RAW_DRIVER=m +CONFIG_HPET=y +# CONFIG_HPET_RTC_IRQ is not set +CONFIG_HPET_MMAP=y +CONFIG_MAX_RAW_DEVS=256 +# CONFIG_HANGCHECK_TIMER is not set +CONFIG_MMTIMER=y + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +CONFIG_VGA_CONSOLE=y +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_HWDEP=m +CONFIG_SND_RAWMIDI=m +CONFIG_SND_SEQUENCER=m +CONFIG_SND_SEQ_DUMMY=m +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_SEQUENCER_OSS=y +CONFIG_SND_VERBOSE_PRINTK=y +# CONFIG_SND_DEBUG is not set +CONFIG_SND_GENERIC_DRIVER=y + +# +# Generic devices +# +CONFIG_SND_MPU401_UART=m +CONFIG_SND_OPL3_LIB=m +CONFIG_SND_DUMMY=m +CONFIG_SND_VIRMIDI=m +CONFIG_SND_MTPAV=m +CONFIG_SND_SERIAL_U16550=m +CONFIG_SND_MPU401=m +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_AC97_BUS=m + +# +# PCI devices +# +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +CONFIG_SND_CS46XX=m +CONFIG_SND_CS46XX_NEW_DSP=y +CONFIG_SND_CS4281=m +CONFIG_SND_EMU10K1=m +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_YMFPCI is not set +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_MAESTRO3 is not set +CONFIG_SND_FM801=m +# CONFIG_SND_FM801_TEA575X is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_HDA_INTEL is not set + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=m +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=m +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_UHCI_HCD=m +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set +# CONFIG_USB_BLUETOOTH_TTY is not set +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +CONFIG_USB_HIDINPUT=y +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +CONFIG_INFINIBAND=m +# CONFIG_INFINIBAND_USER_MAD is not set +# CONFIG_INFINIBAND_USER_ACCESS is not set +CONFIG_INFINIBAND_MTHCA=m +# CONFIG_INFINIBAND_MTHCA_DEBUG is not set +CONFIG_INFINIBAND_IPOIB=m +# CONFIG_INFINIBAND_IPOIB_DEBUG is not set + +# +# SN Devices +# +CONFIG_SGI_IOC4=y + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=y +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=y +CONFIG_XFS_EXPORT=y +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_SECURITY is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +# CONFIG_ZISOFS is not set +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +# CONFIG_NTFS_RW is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_NFS_DIRECTIO=y +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +CONFIG_RPCSEC_GSS_KRB5=m +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +CONFIG_SMB_NLS_DEFAULT=y +CONFIG_SMB_NLS_REMOTE="cp437" +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +CONFIG_SGI_PARTITION=y +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +CONFIG_EFI_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_PENDING_IRQ=y + +# +# HP Simulator drivers +# +# CONFIG_HP_SIMETH is not set +# CONFIG_HP_SIMSERIAL is not set +# CONFIG_HP_SIMSCSI is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=20 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_KPROBES is not set +CONFIG_IA64_GRANULE_16MB=y +# CONFIG_IA64_GRANULE_64MB is not set +# CONFIG_IA64_PRINT_HAZARDS is not set +# CONFIG_DISABLE_VHPT is not set +# CONFIG_IA64_DEBUG_CMPXCHG is not set +# CONFIG_IA64_DEBUG_IRQ is not set +CONFIG_SYSVIPC_COMPAT=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# -- cgit v1.2.2 From b6a7e1ecef66b9ecd1eed31f46ba0248d6d7e957 Mon Sep 17 00:00:00 2001 From: Peter Chubb Date: Thu, 20 Oct 2005 12:31:19 +1000 Subject: [IA64] Allow simulator to use bigger disks The simscsi code at present overflows an int if it's given a large disk image. The attached patch increases the possible size to 128G. While it's unlikely that anyone will want to use SKI with such a large drive, the same framework is currently being used for various virtualisation experiments. Signed-off-by: Peter Chubb Signed-off-by: Tony Luck --- arch/ia64/hp/sim/simscsi.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/ia64/hp/sim/simscsi.c b/arch/ia64/hp/sim/simscsi.c index a18983a3c934..a3fe97531134 100644 --- a/arch/ia64/hp/sim/simscsi.c +++ b/arch/ia64/hp/sim/simscsi.c @@ -205,10 +205,11 @@ simscsi_get_disk_size (int fd) char buf[512]; /* - * This is a bit kludgey: the simulator doesn't provide a direct way of determining - * the disk size, so we do a binary search, assuming a maximum disk size of 4GB. + * This is a bit kludgey: the simulator doesn't provide a + * direct way of determining the disk size, so we do a binary + * search, assuming a maximum disk size of 128GB. */ - for (bit = (4UL << 30)/512; bit != 0; bit >>= 1) { + for (bit = (128UL << 30)/512; bit != 0; bit >>= 1) { req.addr = __pa(&buf); req.len = sizeof(buf); ia64_ssc(fd, 1, __pa(&req), ((sectors | bit) - 1)*512, SSC_READ); @@ -225,8 +226,10 @@ simscsi_readwrite10 (struct scsi_cmnd *sc, int mode) { unsigned long offset; - offset = ( (sc->cmnd[2] << 24) | (sc->cmnd[3] << 16) - | (sc->cmnd[4] << 8) | (sc->cmnd[5] << 0))*512; + offset = (((unsigned long)sc->cmnd[2] << 24) + | ((unsigned long)sc->cmnd[3] << 16) + | ((unsigned long)sc->cmnd[4] << 8) + | ((unsigned long)sc->cmnd[5] << 0))*512UL; if (sc->use_sg > 0) simscsi_sg_readwrite(sc, mode, offset); else -- cgit v1.2.2 From ce6e71ad4866dad366be135b024b776c00ec9ec8 Mon Sep 17 00:00:00 2001 From: "Siddha, Suresh B" Date: Tue, 4 Oct 2005 16:35:31 -0700 Subject: [IA64] fix siblings field value in /proc/cpuinfo Fix the "siblings" field value in /proc/cpuinfo so that it now shows the number of siblings as seen by OS, instead of what is available from hardware perspective. Signed-off-by: Suresh Siddha Signed-off-by: Tony Luck --- arch/ia64/kernel/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index 1f5c26dbe705..0ca6ef103952 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -526,7 +526,7 @@ show_cpuinfo (struct seq_file *m, void *v) c->itc_freq / 1000000, c->itc_freq % 1000000, lpj*HZ/500000, (lpj*HZ/5000) % 100); #ifdef CONFIG_SMP - seq_printf(m, "siblings : %u\n", c->num_log); + seq_printf(m, "siblings : %u\n", cpus_weight(cpu_core_map[cpunum])); if (c->threads_per_core > 1 || c->cores_per_socket > 1) seq_printf(m, "physical id: %u\n" -- cgit v1.2.2 From 9c184a073bfd650cc791956d6ca79725bb682716 Mon Sep 17 00:00:00 2001 From: "H. J. Lu" Date: Fri, 7 Oct 2005 11:01:19 -0700 Subject: [IA64] Fix 2.6 kernel for the new ia64 assembler The new ia64 assembler uses slot 1 for the offset of a long (2-slot) instruction and the old assembler uses slot 2. The 2.6 kernel assumes slot 2 and won't boot when the new assembler is used: http://sources.redhat.com/bugzilla/show_bug.cgi?id=1433 This patch will work with either slot 1 or 2. Patch provided by H.J. Lu Signed-off-by: Tony Luck --- arch/ia64/kernel/patch.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/patch.c b/arch/ia64/kernel/patch.c index 367804a605fa..6a4ac7d70b35 100644 --- a/arch/ia64/kernel/patch.c +++ b/arch/ia64/kernel/patch.c @@ -64,22 +64,30 @@ ia64_patch (u64 insn_addr, u64 mask, u64 val) void ia64_patch_imm64 (u64 insn_addr, u64 val) { - ia64_patch(insn_addr, + /* The assembler may generate offset pointing to either slot 1 + or slot 2 for a long (2-slot) instruction, occupying slots 1 + and 2. */ + insn_addr &= -16UL; + ia64_patch(insn_addr + 2, 0x01fffefe000UL, ( ((val & 0x8000000000000000UL) >> 27) /* bit 63 -> 36 */ | ((val & 0x0000000000200000UL) << 0) /* bit 21 -> 21 */ | ((val & 0x00000000001f0000UL) << 6) /* bit 16 -> 22 */ | ((val & 0x000000000000ff80UL) << 20) /* bit 7 -> 27 */ | ((val & 0x000000000000007fUL) << 13) /* bit 0 -> 13 */)); - ia64_patch(insn_addr - 1, 0x1ffffffffffUL, val >> 22); + ia64_patch(insn_addr + 1, 0x1ffffffffffUL, val >> 22); } void ia64_patch_imm60 (u64 insn_addr, u64 val) { - ia64_patch(insn_addr, + /* The assembler may generate offset pointing to either slot 1 + or slot 2 for a long (2-slot) instruction, occupying slots 1 + and 2. */ + insn_addr &= -16UL; + ia64_patch(insn_addr + 2, 0x011ffffe000UL, ( ((val & 0x0800000000000000UL) >> 23) /* bit 59 -> 36 */ | ((val & 0x00000000000fffffUL) << 13) /* bit 0 -> 13 */)); - ia64_patch(insn_addr - 1, 0x1fffffffffcUL, val >> 18); + ia64_patch(insn_addr + 1, 0x1fffffffffcUL, val >> 18); } /* -- cgit v1.2.2 From dc565b525d4b7091a3abb6616d210c8a896a11d7 Mon Sep 17 00:00:00 2001 From: "hawkes@sgi.com" Date: Mon, 10 Oct 2005 08:43:26 -0700 Subject: [IA64] wider use of for_each_cpu_mask() in arch/ia64 In arch/ia64 change the explicit use of for-loops and NR_CPUS into the general for_each_cpu() or for_each_online_cpu() constructs, as appropriate. This widens the scope of potential future optimizations of the general constructs, as well as takes advantage of the existing optimizations of first_cpu() and next_cpu(). Signed-off-by: John Hawkes Signed-off-by: Tony Luck --- arch/ia64/kernel/irq.c | 12 ++++++------ arch/ia64/kernel/module.c | 6 +++--- arch/ia64/kernel/smp.c | 10 +++++----- arch/ia64/kernel/smpboot.c | 6 +++--- arch/ia64/mm/tlb.c | 5 +++-- 5 files changed, 20 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/irq.c b/arch/ia64/kernel/irq.c index 205d98028261..d33244c32759 100644 --- a/arch/ia64/kernel/irq.c +++ b/arch/ia64/kernel/irq.c @@ -57,9 +57,9 @@ int show_interrupts(struct seq_file *p, void *v) if (i == 0) { seq_printf(p, " "); - for (j=0; jtypename); seq_printf(p, " %s", action->name); diff --git a/arch/ia64/kernel/module.c b/arch/ia64/kernel/module.c index f1aca7cffd12..7a2f0a798d12 100644 --- a/arch/ia64/kernel/module.c +++ b/arch/ia64/kernel/module.c @@ -947,8 +947,8 @@ void percpu_modcopy (void *pcpudst, const void *src, unsigned long size) { unsigned int i; - for (i = 0; i < NR_CPUS; i++) - if (cpu_possible(i)) - memcpy(pcpudst + __per_cpu_offset[i], src, size); + for_each_cpu(i) { + memcpy(pcpudst + __per_cpu_offset[i], src, size); + } } #endif /* CONFIG_SMP */ diff --git a/arch/ia64/kernel/smp.c b/arch/ia64/kernel/smp.c index 0166a9847095..657ac99a451c 100644 --- a/arch/ia64/kernel/smp.c +++ b/arch/ia64/kernel/smp.c @@ -185,8 +185,8 @@ send_IPI_allbutself (int op) { unsigned int i; - for (i = 0; i < NR_CPUS; i++) { - if (cpu_online(i) && i != smp_processor_id()) + for_each_online_cpu(i) { + if (i != smp_processor_id()) send_IPI_single(i, op); } } @@ -199,9 +199,9 @@ send_IPI_all (int op) { int i; - for (i = 0; i < NR_CPUS; i++) - if (cpu_online(i)) - send_IPI_single(i, op); + for_each_online_cpu(i) { + send_IPI_single(i, op); + } } /* diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c index 7d72c0d872b3..400a48987124 100644 --- a/arch/ia64/kernel/smpboot.c +++ b/arch/ia64/kernel/smpboot.c @@ -694,9 +694,9 @@ smp_cpus_done (unsigned int dummy) * Allow the user to impress friends. */ - for (cpu = 0; cpu < NR_CPUS; cpu++) - if (cpu_online(cpu)) - bogosum += cpu_data(cpu)->loops_per_jiffy; + for_each_online_cpu(cpu) { + bogosum += cpu_data(cpu)->loops_per_jiffy; + } printk(KERN_INFO "Total of %d processors activated (%lu.%02lu BogoMIPS).\n", (int)num_online_cpus(), bogosum/(500000/HZ), (bogosum/(5000/HZ))%100); diff --git a/arch/ia64/mm/tlb.c b/arch/ia64/mm/tlb.c index 464557e4ed82..987fb754d6ad 100644 --- a/arch/ia64/mm/tlb.c +++ b/arch/ia64/mm/tlb.c @@ -77,9 +77,10 @@ wrap_mmu_context (struct mm_struct *mm) /* can't call flush_tlb_all() here because of race condition with O(1) scheduler [EF] */ { int cpu = get_cpu(); /* prevent preemption/migration */ - for (i = 0; i < NR_CPUS; ++i) - if (cpu_online(i) && (i != cpu)) + for_each_online_cpu(i) { + if (i != cpu) per_cpu(ia64_need_tlb_flush, i) = 1; + } put_cpu(); } local_flush_tlb_all(); -- cgit v1.2.2 From ddf6d0a00cbb4ad6d4fb4200cc911bb9389174c1 Mon Sep 17 00:00:00 2001 From: "hawkes@sgi.com" Date: Thu, 13 Oct 2005 12:01:18 -0700 Subject: [IA64] another place to use for_each_cpu_mask() in arch/ia64 In arch/ia64 change the explicit use of a for-loop using NR_CPUS into the general for_each_online_cpu() construct. This widens the scope of potential future optimizations of the general constructs, as well as takes advantage of the existing optimizations of first_cpu() and next_cpu(), which is advantageous when the true CPU count is much smaller than NR_CPUS. Signed-off-by: John Hawkes Signed-off-by: Tony Luck --- arch/ia64/kernel/mca.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index d0a5106fba24..52c47da17246 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -508,9 +508,7 @@ ia64_mca_wakeup_all(void) int cpu; /* Clear the Rendez checkin flag for all cpus */ - for(cpu = 0; cpu < NR_CPUS; cpu++) { - if (!cpu_online(cpu)) - continue; + for_each_online_cpu(cpu) { if (ia64_mc_info.imi_rendez_checkin[cpu] == IA64_MCA_RENDEZ_CHECKIN_DONE) ia64_mca_wakeup(cpu); } -- cgit v1.2.2 From e54af724c1ae3530c95135157776c9be65cdb747 Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Tue, 25 Oct 2005 14:07:43 -0500 Subject: [IA64-SGI] fixes for XPC disengage and open/close protocol This patch addresses a few issues with the open/close protocol that were revealed by the newly added disengage functionality combined with more extensive testing. Signed-off-by: Dean Nelson Signed-off-by: Tony Luck --- arch/ia64/sn/kernel/xpc.h | 21 +++--- arch/ia64/sn/kernel/xpc_channel.c | 117 ++++++++++++++++++++--------- arch/ia64/sn/kernel/xpc_main.c | 146 ++++++++++++++++++++++++++---------- arch/ia64/sn/kernel/xpc_partition.c | 8 +- 4 files changed, 204 insertions(+), 88 deletions(-) (limited to 'arch') diff --git a/arch/ia64/sn/kernel/xpc.h b/arch/ia64/sn/kernel/xpc.h index 565822ab3d08..ae51d7b4c42e 100644 --- a/arch/ia64/sn/kernel/xpc.h +++ b/arch/ia64/sn/kernel/xpc.h @@ -417,6 +417,9 @@ struct xpc_channel { atomic_t n_on_msg_allocate_wq; /* #on msg allocation wait queue */ wait_queue_head_t msg_allocate_wq; /* msg allocation wait queue */ + u8 delayed_IPI_flags; /* IPI flags received, but delayed */ + /* action until channel disconnected */ + /* queue of msg senders who want to be notified when msg received */ atomic_t n_to_notify; /* #of msg senders to notify */ @@ -478,7 +481,8 @@ struct xpc_channel { #define XPC_C_DISCONNECTED 0x00002000 /* channel is disconnected */ #define XPC_C_DISCONNECTING 0x00004000 /* channel is being disconnected */ -#define XPC_C_WDISCONNECT 0x00008000 /* waiting for channel disconnect */ +#define XPC_C_DISCONNECTCALLOUT 0x00008000 /* chan disconnected callout made */ +#define XPC_C_WDISCONNECT 0x00010000 /* waiting for channel disconnect */ @@ -508,13 +512,13 @@ struct xpc_partition { int reason_line; /* line# deactivation initiated from */ int reactivate_nasid; /* nasid in partition to reactivate */ - unsigned long disengage_request_timeout; /* timeout in XPC_TICKS */ + unsigned long disengage_request_timeout; /* timeout in jiffies */ struct timer_list disengage_request_timer; /* XPC infrastructure referencing and teardown control */ - volatile u8 setup_state; /* infrastructure setup state */ + volatile u8 setup_state; /* infrastructure setup state */ wait_queue_head_t teardown_wq; /* kthread waiting to teardown infra */ atomic_t references; /* #of references to infrastructure */ @@ -604,7 +608,7 @@ struct xpc_partition { /* number of seconds to wait for other partitions to disengage */ -#define XPC_DISENGAGE_REQUEST_TIMELIMIT 90 +#define XPC_DISENGAGE_REQUEST_DEFAULT_TIMELIMIT 90 /* interval in seconds to print 'waiting disengagement' messages */ #define XPC_DISENGAGE_PRINTMSG_INTERVAL 10 @@ -618,20 +622,18 @@ struct xpc_partition { extern struct xpc_registration xpc_registrations[]; -/* >>> found in xpc_main.c only */ +/* found in xpc_main.c */ extern struct device *xpc_part; extern struct device *xpc_chan; +extern int xpc_disengage_request_timelimit; extern irqreturn_t xpc_notify_IRQ_handler(int, void *, struct pt_regs *); extern void xpc_dropped_IPI_check(struct xpc_partition *); +extern void xpc_activate_partition(struct xpc_partition *); extern void xpc_activate_kthreads(struct xpc_channel *, int); extern void xpc_create_kthreads(struct xpc_channel *, int); extern void xpc_disconnect_wait(int); -/* found in xpc_main.c and efi-xpc.c */ -extern void xpc_activate_partition(struct xpc_partition *); - - /* found in xpc_partition.c */ extern int xpc_exiting; extern struct xpc_vars *xpc_vars; @@ -1077,6 +1079,7 @@ xpc_notify_IRQ_send_local(struct xpc_channel *ch, u8 ipi_flag, /* given an AMO variable and a channel#, get its associated IPI flags */ #define XPC_GET_IPI_FLAGS(_amo, _c) ((u8) (((_amo) >> ((_c) * 8)) & 0xff)) +#define XPC_SET_IPI_FLAGS(_amo, _c, _f) (_amo) |= ((u64) (_f) << ((_c) * 8)) #define XPC_ANY_OPENCLOSE_IPI_FLAGS_SET(_amo) ((_amo) & 0x0f0f0f0f0f0f0f0f) #define XPC_ANY_MSG_IPI_FLAGS_SET(_amo) ((_amo) & 0x1010101010101010) diff --git a/arch/ia64/sn/kernel/xpc_channel.c b/arch/ia64/sn/kernel/xpc_channel.c index 195ac1b8e262..abf4fc2a87bb 100644 --- a/arch/ia64/sn/kernel/xpc_channel.c +++ b/arch/ia64/sn/kernel/xpc_channel.c @@ -792,11 +792,20 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags) "reason=%d\n", ch->number, ch->partid, ch->reason); } - /* wake the thread that is waiting for this channel to disconnect */ if (ch->flags & XPC_C_WDISCONNECT) { spin_unlock_irqrestore(&ch->lock, *irq_flags); up(&ch->wdisconnect_sema); spin_lock_irqsave(&ch->lock, *irq_flags); + + } else if (ch->delayed_IPI_flags) { + if (part->act_state != XPC_P_DEACTIVATING) { + /* time to take action on any delayed IPI flags */ + spin_lock(&part->IPI_lock); + XPC_SET_IPI_FLAGS(part->local_IPI_amo, ch->number, + ch->delayed_IPI_flags); + spin_unlock(&part->IPI_lock); + } + ch->delayed_IPI_flags = 0; } } @@ -818,6 +827,19 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number, spin_lock_irqsave(&ch->lock, irq_flags); +again: + + if ((ch->flags & XPC_C_DISCONNECTED) && + (ch->flags & XPC_C_WDISCONNECT)) { + /* + * Delay processing IPI flags until thread waiting disconnect + * has had a chance to see that the channel is disconnected. + */ + ch->delayed_IPI_flags |= IPI_flags; + spin_unlock_irqrestore(&ch->lock, irq_flags); + return; + } + if (IPI_flags & XPC_IPI_CLOSEREQUEST) { @@ -843,14 +865,22 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number, /* both sides have finished disconnecting */ xpc_process_disconnect(ch, &irq_flags); + DBUG_ON(!(ch->flags & XPC_C_DISCONNECTED)); + goto again; } if (ch->flags & XPC_C_DISCONNECTED) { - // >>> explain this section - if (!(IPI_flags & XPC_IPI_OPENREQUEST)) { - DBUG_ON(part->act_state != - XPC_P_DEACTIVATING); + if ((XPC_GET_IPI_FLAGS(part->local_IPI_amo, + ch_number) & XPC_IPI_OPENREQUEST)) { + + DBUG_ON(ch->delayed_IPI_flags != 0); + spin_lock(&part->IPI_lock); + XPC_SET_IPI_FLAGS(part->local_IPI_amo, + ch_number, + XPC_IPI_CLOSEREQUEST); + spin_unlock(&part->IPI_lock); + } spin_unlock_irqrestore(&ch->lock, irq_flags); return; } @@ -880,9 +910,13 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number, } XPC_DISCONNECT_CHANNEL(ch, reason, &irq_flags); - } else { - xpc_process_disconnect(ch, &irq_flags); + + DBUG_ON(IPI_flags & XPC_IPI_CLOSEREPLY); + spin_unlock_irqrestore(&ch->lock, irq_flags); + return; } + + xpc_process_disconnect(ch, &irq_flags); } @@ -898,7 +932,20 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number, } DBUG_ON(!(ch->flags & XPC_C_CLOSEREQUEST)); - DBUG_ON(!(ch->flags & XPC_C_RCLOSEREQUEST)); + + if (!(ch->flags & XPC_C_RCLOSEREQUEST)) { + if ((XPC_GET_IPI_FLAGS(part->local_IPI_amo, ch_number) + & XPC_IPI_CLOSEREQUEST)) { + + DBUG_ON(ch->delayed_IPI_flags != 0); + spin_lock(&part->IPI_lock); + XPC_SET_IPI_FLAGS(part->local_IPI_amo, + ch_number, XPC_IPI_CLOSEREPLY); + spin_unlock(&part->IPI_lock); + } + spin_unlock_irqrestore(&ch->lock, irq_flags); + return; + } ch->flags |= XPC_C_RCLOSEREPLY; @@ -916,8 +963,14 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number, "channel=%d\n", args->msg_size, args->local_nentries, ch->partid, ch->number); - if ((ch->flags & (XPC_C_DISCONNECTING | XPC_C_WDISCONNECT)) || - part->act_state == XPC_P_DEACTIVATING) { + if (part->act_state == XPC_P_DEACTIVATING || + (ch->flags & XPC_C_ROPENREQUEST)) { + spin_unlock_irqrestore(&ch->lock, irq_flags); + return; + } + + if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_WDISCONNECT)) { + ch->delayed_IPI_flags |= XPC_IPI_OPENREQUEST; spin_unlock_irqrestore(&ch->lock, irq_flags); return; } @@ -931,8 +984,11 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number, * msg_size = size of channel's messages in bytes * local_nentries = remote partition's local_nentries */ - DBUG_ON(args->msg_size == 0); - DBUG_ON(args->local_nentries == 0); + if (args->msg_size == 0 || args->local_nentries == 0) { + /* assume OPENREQUEST was delayed by mistake */ + spin_unlock_irqrestore(&ch->lock, irq_flags); + return; + } ch->flags |= (XPC_C_ROPENREQUEST | XPC_C_CONNECTING); ch->remote_nentries = args->local_nentries; @@ -970,7 +1026,13 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number, spin_unlock_irqrestore(&ch->lock, irq_flags); return; } - DBUG_ON(!(ch->flags & XPC_C_OPENREQUEST)); + if (!(ch->flags & XPC_C_OPENREQUEST)) { + XPC_DISCONNECT_CHANNEL(ch, xpcOpenCloseError, + &irq_flags); + spin_unlock_irqrestore(&ch->lock, irq_flags); + return; + } + DBUG_ON(!(ch->flags & XPC_C_ROPENREQUEST)); DBUG_ON(ch->flags & XPC_C_CONNECTED); @@ -1024,8 +1086,8 @@ xpc_connect_channel(struct xpc_channel *ch) struct xpc_registration *registration = &xpc_registrations[ch->number]; - if (down_interruptible(®istration->sema) != 0) { - return xpcInterrupted; + if (down_trylock(®istration->sema) != 0) { + return xpcRetry; } if (!XPC_CHANNEL_REGISTERED(ch->number)) { @@ -1445,19 +1507,11 @@ xpc_initiate_connect(int ch_number) if (xpc_part_ref(part)) { ch = &part->channels[ch_number]; - if (!(ch->flags & XPC_C_DISCONNECTING)) { - DBUG_ON(ch->flags & XPC_C_OPENREQUEST); - DBUG_ON(ch->flags & XPC_C_CONNECTED); - DBUG_ON(ch->flags & XPC_C_SETUP); - - /* - * Initiate the establishment of a connection - * on the newly registered channel to the - * remote partition. - */ - xpc_wakeup_channel_mgr(part); - } - + /* + * Initiate the establishment of a connection on the + * newly registered channel to the remote partition. + */ + xpc_wakeup_channel_mgr(part); xpc_part_deref(part); } } @@ -1467,9 +1521,6 @@ xpc_initiate_connect(int ch_number) void xpc_connected_callout(struct xpc_channel *ch) { - unsigned long irq_flags; - - /* let the registerer know that a connection has been established */ if (ch->func != NULL) { @@ -1482,10 +1533,6 @@ xpc_connected_callout(struct xpc_channel *ch) dev_dbg(xpc_chan, "ch->func() returned, reason=xpcConnected, " "partid=%d, channel=%d\n", ch->partid, ch->number); } - - spin_lock_irqsave(&ch->lock, irq_flags); - ch->flags |= XPC_C_CONNECTCALLOUT; - spin_unlock_irqrestore(&ch->lock, irq_flags); } diff --git a/arch/ia64/sn/kernel/xpc_main.c b/arch/ia64/sn/kernel/xpc_main.c index feece200b3c3..db349c6d4c58 100644 --- a/arch/ia64/sn/kernel/xpc_main.c +++ b/arch/ia64/sn/kernel/xpc_main.c @@ -91,6 +91,10 @@ static int xpc_hb_check_interval = XPC_HB_CHECK_DEFAULT_INTERVAL; static int xpc_hb_check_min_interval = 10; static int xpc_hb_check_max_interval = 120; +int xpc_disengage_request_timelimit = XPC_DISENGAGE_REQUEST_DEFAULT_TIMELIMIT; +static int xpc_disengage_request_min_timelimit = 0; +static int xpc_disengage_request_max_timelimit = 120; + static ctl_table xpc_sys_xpc_hb_dir[] = { { 1, @@ -129,6 +133,19 @@ static ctl_table xpc_sys_xpc_dir[] = { 0555, xpc_sys_xpc_hb_dir }, + { + 2, + "disengage_request_timelimit", + &xpc_disengage_request_timelimit, + sizeof(int), + 0644, + NULL, + &proc_dointvec_minmax, + &sysctl_intvec, + NULL, + &xpc_disengage_request_min_timelimit, + &xpc_disengage_request_max_timelimit + }, {0} }; static ctl_table xpc_sys_dir[] = { @@ -153,11 +170,11 @@ static DECLARE_WAIT_QUEUE_HEAD(xpc_act_IRQ_wq); static unsigned long xpc_hb_check_timeout; -/* used as an indication of when the xpc_hb_checker thread is inactive */ -static DECLARE_MUTEX_LOCKED(xpc_hb_checker_inactive); +/* notification that the xpc_hb_checker thread has exited */ +static DECLARE_MUTEX_LOCKED(xpc_hb_checker_exited); -/* used as an indication of when the xpc_discovery thread is inactive */ -static DECLARE_MUTEX_LOCKED(xpc_discovery_inactive); +/* notification that the xpc_discovery thread has exited */ +static DECLARE_MUTEX_LOCKED(xpc_discovery_exited); static struct timer_list xpc_hb_timer; @@ -181,7 +198,7 @@ xpc_timeout_partition_disengage_request(unsigned long data) struct xpc_partition *part = (struct xpc_partition *) data; - DBUG_ON(XPC_TICKS < part->disengage_request_timeout); + DBUG_ON(jiffies < part->disengage_request_timeout); (void) xpc_partition_disengaged(part); @@ -292,8 +309,8 @@ xpc_hb_checker(void *ignore) dev_dbg(xpc_part, "heartbeat checker is exiting\n"); - /* mark this thread as inactive */ - up(&xpc_hb_checker_inactive); + /* mark this thread as having exited */ + up(&xpc_hb_checker_exited); return 0; } @@ -312,8 +329,8 @@ xpc_initiate_discovery(void *ignore) dev_dbg(xpc_part, "discovery thread is exiting\n"); - /* mark this thread as inactive */ - up(&xpc_discovery_inactive); + /* mark this thread as having exited */ + up(&xpc_discovery_exited); return 0; } @@ -703,6 +720,7 @@ xpc_daemonize_kthread(void *args) struct xpc_partition *part = &xpc_partitions[partid]; struct xpc_channel *ch; int n_needed; + unsigned long irq_flags; daemonize("xpc%02dc%d", partid, ch_number); @@ -713,11 +731,14 @@ xpc_daemonize_kthread(void *args) ch = &part->channels[ch_number]; if (!(ch->flags & XPC_C_DISCONNECTING)) { - DBUG_ON(!(ch->flags & XPC_C_CONNECTED)); /* let registerer know that connection has been established */ - if (atomic_read(&ch->kthreads_assigned) == 1) { + spin_lock_irqsave(&ch->lock, irq_flags); + if (!(ch->flags & XPC_C_CONNECTCALLOUT)) { + ch->flags |= XPC_C_CONNECTCALLOUT; + spin_unlock_irqrestore(&ch->lock, irq_flags); + xpc_connected_callout(ch); /* @@ -732,14 +753,23 @@ xpc_daemonize_kthread(void *args) !(ch->flags & XPC_C_DISCONNECTING)) { xpc_activate_kthreads(ch, n_needed); } + } else { + spin_unlock_irqrestore(&ch->lock, irq_flags); } xpc_kthread_waitmsgs(part, ch); } if (atomic_dec_return(&ch->kthreads_assigned) == 0) { - if (ch->flags & XPC_C_CONNECTCALLOUT) { + spin_lock_irqsave(&ch->lock, irq_flags); + if ((ch->flags & XPC_C_CONNECTCALLOUT) && + !(ch->flags & XPC_C_DISCONNECTCALLOUT)) { + ch->flags |= XPC_C_DISCONNECTCALLOUT; + spin_unlock_irqrestore(&ch->lock, irq_flags); + xpc_disconnecting_callout(ch); + } else { + spin_unlock_irqrestore(&ch->lock, irq_flags); } if (atomic_dec_return(&part->nchannels_engaged) == 0) { xpc_mark_partition_disengaged(part); @@ -780,9 +810,29 @@ xpc_create_kthreads(struct xpc_channel *ch, int needed) while (needed-- > 0) { + + /* + * The following is done on behalf of the newly created + * kthread. That kthread is responsible for doing the + * counterpart to the following before it exits. + */ + (void) xpc_part_ref(part); + xpc_msgqueue_ref(ch); + if (atomic_inc_return(&ch->kthreads_assigned) == 1 && + atomic_inc_return(&part->nchannels_engaged) == 1) { + xpc_mark_partition_engaged(part); + } + pid = kernel_thread(xpc_daemonize_kthread, (void *) args, 0); if (pid < 0) { /* the fork failed */ + if (atomic_dec_return(&ch->kthreads_assigned) == 0 && + atomic_dec_return(&part->nchannels_engaged) == 0) { + xpc_mark_partition_disengaged(part); + xpc_IPI_send_disengage(part); + } + xpc_msgqueue_deref(ch); + xpc_part_deref(part); if (atomic_read(&ch->kthreads_assigned) < ch->kthreads_idle_limit) { @@ -802,18 +852,6 @@ xpc_create_kthreads(struct xpc_channel *ch, int needed) break; } - /* - * The following is done on behalf of the newly created - * kthread. That kthread is responsible for doing the - * counterpart to the following before it exits. - */ - (void) xpc_part_ref(part); - xpc_msgqueue_ref(ch); - if (atomic_inc_return(&ch->kthreads_assigned) == 1) { - if (atomic_inc_return(&part->nchannels_engaged) == 1) { - xpc_mark_partition_engaged(part); - } - } ch->kthreads_created++; // >>> temporary debug only!!! } } @@ -826,26 +864,49 @@ xpc_disconnect_wait(int ch_number) partid_t partid; struct xpc_partition *part; struct xpc_channel *ch; + int wakeup_channel_mgr; /* now wait for all callouts to the caller's function to cease */ for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { part = &xpc_partitions[partid]; - if (xpc_part_ref(part)) { - ch = &part->channels[ch_number]; + if (!xpc_part_ref(part)) { + continue; + } - if (ch->flags & XPC_C_WDISCONNECT) { - if (!(ch->flags & XPC_C_DISCONNECTED)) { - (void) down(&ch->wdisconnect_sema); - } - spin_lock_irqsave(&ch->lock, irq_flags); - ch->flags &= ~XPC_C_WDISCONNECT; - spin_unlock_irqrestore(&ch->lock, irq_flags); - } + ch = &part->channels[ch_number]; + if (!(ch->flags & XPC_C_WDISCONNECT)) { xpc_part_deref(part); + continue; } + + (void) down(&ch->wdisconnect_sema); + + spin_lock_irqsave(&ch->lock, irq_flags); + DBUG_ON(!(ch->flags & XPC_C_DISCONNECTED)); + wakeup_channel_mgr = 0; + + if (ch->delayed_IPI_flags) { + if (part->act_state != XPC_P_DEACTIVATING) { + spin_lock(&part->IPI_lock); + XPC_SET_IPI_FLAGS(part->local_IPI_amo, + ch->number, ch->delayed_IPI_flags); + spin_unlock(&part->IPI_lock); + wakeup_channel_mgr = 1; + } + ch->delayed_IPI_flags = 0; + } + + ch->flags &= ~XPC_C_WDISCONNECT; + spin_unlock_irqrestore(&ch->lock, irq_flags); + + if (wakeup_channel_mgr) { + xpc_wakeup_channel_mgr(part); + } + + xpc_part_deref(part); } } @@ -873,11 +934,11 @@ xpc_do_exit(enum xpc_retval reason) /* ignore all incoming interrupts */ free_irq(SGI_XPC_ACTIVATE, NULL); - /* wait for the discovery thread to mark itself inactive */ - down(&xpc_discovery_inactive); + /* wait for the discovery thread to exit */ + down(&xpc_discovery_exited); - /* wait for the heartbeat checker thread to mark itself inactive */ - down(&xpc_hb_checker_inactive); + /* wait for the heartbeat checker thread to exit */ + down(&xpc_hb_checker_exited); /* sleep for a 1/3 of a second or so */ @@ -893,6 +954,7 @@ xpc_do_exit(enum xpc_retval reason) for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { part = &xpc_partitions[partid]; + if (xpc_partition_disengaged(part) && part->act_state == XPC_P_INACTIVE) { continue; @@ -930,7 +992,7 @@ xpc_do_exit(enum xpc_retval reason) /* now it's time to eliminate our heartbeat */ del_timer_sync(&xpc_hb_timer); - DBUG_ON(xpc_vars->heartbeating_to_mask == 0); + DBUG_ON(xpc_vars->heartbeating_to_mask != 0); /* take ourselves off of the reboot_notifier_list */ (void) unregister_reboot_notifier(&xpc_reboot_notifier); @@ -1134,7 +1196,7 @@ xpc_init(void) dev_err(xpc_part, "failed while forking discovery thread\n"); /* mark this new thread as a non-starter */ - up(&xpc_discovery_inactive); + up(&xpc_discovery_exited); xpc_do_exit(xpcUnloading); return -EBUSY; @@ -1172,3 +1234,7 @@ module_param(xpc_hb_check_interval, int, 0); MODULE_PARM_DESC(xpc_hb_check_interval, "Number of seconds between " "heartbeat checks."); +module_param(xpc_disengage_request_timelimit, int, 0); +MODULE_PARM_DESC(xpc_disengage_request_timelimit, "Number of seconds to wait " + "for disengage request to complete."); + diff --git a/arch/ia64/sn/kernel/xpc_partition.c b/arch/ia64/sn/kernel/xpc_partition.c index 79a0fc4c860c..958488f55699 100644 --- a/arch/ia64/sn/kernel/xpc_partition.c +++ b/arch/ia64/sn/kernel/xpc_partition.c @@ -578,7 +578,7 @@ xpc_update_partition_info(struct xpc_partition *part, u8 remote_rp_version, /* - * Prior code has determine the nasid which generated an IPI. Inspect + * Prior code has determined the nasid which generated an IPI. Inspect * that nasid to determine if its partition needs to be activated or * deactivated. * @@ -942,14 +942,14 @@ xpc_deactivate_partition(const int line, struct xpc_partition *part, /* set a timelimit on the disengage request */ part->disengage_request_timeout = jiffies + - (XPC_DISENGAGE_REQUEST_TIMELIMIT * HZ); + (xpc_disengage_request_timelimit * HZ); part->disengage_request_timer.expires = part->disengage_request_timeout; add_timer(&part->disengage_request_timer); } - dev_dbg(xpc_part, "bringing partition %d down, reason = %d\n", partid, - reason); + dev_dbg(xpc_part, "bringing partition %d down, reason = %d\n", + XPC_PARTID(part), reason); xpc_partition_going_down(part, reason); } -- cgit v1.2.2 From 4b38fcd4858204cb3667eb7b3aca48ffb1002f05 Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Tue, 25 Oct 2005 14:09:51 -0500 Subject: [IA64-SGI] XPC changes to support more than 2k nasids XPC needs to be changed to support up to 16k nasids on an SGI Altix system. Signed-off-by: Dean Nelson Signed-off-by: Tony Luck --- arch/ia64/sn/kernel/xpc.h | 77 ++++++++++++++------ arch/ia64/sn/kernel/xpc_main.c | 8 +-- arch/ia64/sn/kernel/xpc_partition.c | 140 ++++++++++++++++++++---------------- 3 files changed, 141 insertions(+), 84 deletions(-) (limited to 'arch') diff --git a/arch/ia64/sn/kernel/xpc.h b/arch/ia64/sn/kernel/xpc.h index ae51d7b4c42e..33df1b3758b6 100644 --- a/arch/ia64/sn/kernel/xpc.h +++ b/arch/ia64/sn/kernel/xpc.h @@ -68,29 +68,58 @@ /* - * Reserved Page provided by SAL. + * the reserved page * - * SAL provides one page per partition of reserved memory. When SAL - * initialization is complete, SAL_signature, SAL_version, partid, - * part_nasids, and mach_nasids are set. + * SAL reserves one page of memory per partition for XPC. Though a full page + * in length (16384 bytes), its starting address is not page aligned, but it + * is cacheline aligned. The reserved page consists of the following: + * + * reserved page header + * + * The first cacheline of the reserved page contains the header + * (struct xpc_rsvd_page). Before SAL initialization has completed, + * SAL has set up the following fields of the reserved page header: + * SAL_signature, SAL_version, partid, and nasids_size. The other + * fields are set up by XPC. (xpc_rsvd_page points to the local + * partition's reserved page.) + * + * part_nasids mask + * mach_nasids mask + * + * SAL also sets up two bitmaps (or masks), one that reflects the actual + * nasids in this partition (part_nasids), and the other that reflects + * the actual nasids in the entire machine (mach_nasids). We're only + * interested in the even numbered nasids (which contain the processors + * and/or memory), so we only need half as many bits to represent the + * nasids. The part_nasids mask is located starting at the first cacheline + * following the reserved page header. The mach_nasids mask follows right + * after the part_nasids mask. The size in bytes of each mask is reflected + * by the reserved page header field 'nasids_size'. (Local partition's + * mask pointers are xpc_part_nasids and xpc_mach_nasids.) + * + * vars + * vars part + * + * Immediately following the mach_nasids mask are the XPC variables + * required by other partitions. First are those that are generic to all + * partitions (vars), followed on the next available cacheline by those + * which are partition specific (vars part). These are setup by XPC. + * (Local partition's vars pointers are xpc_vars and xpc_vars_part.) * * Note: Until vars_pa is set, the partition XPC code has not been initialized. */ struct xpc_rsvd_page { - u64 SAL_signature; /* SAL unique signature */ - u64 SAL_version; /* SAL specified version */ - u8 partid; /* partition ID from SAL */ + u64 SAL_signature; /* SAL: unique signature */ + u64 SAL_version; /* SAL: version */ + u8 partid; /* SAL: partition ID */ u8 version; - u8 pad[6]; /* pad to u64 align */ + u8 pad1[6]; /* align to next u64 in cacheline */ volatile u64 vars_pa; - struct timespec stamp; /* time when reserved page was initialized */ - u64 part_nasids[XP_NASID_MASK_WORDS] ____cacheline_aligned; - u64 mach_nasids[XP_NASID_MASK_WORDS] ____cacheline_aligned; + struct timespec stamp; /* time when reserved page was setup by XPC */ + u64 pad2[9]; /* align to last u64 in cacheline */ + u64 nasids_size; /* SAL: size of each nasid mask in bytes */ }; -#define XPC_RSVD_PAGE_ALIGNED_SIZE \ - (L1_CACHE_ALIGN(sizeof(struct xpc_rsvd_page))) - #define XPC_RP_VERSION _XPC_VERSION(1,1) /* version 1.1 of the reserved page */ #define XPC_SUPPORTS_RP_STAMP(_version) \ @@ -142,8 +171,6 @@ struct xpc_vars { AMO_t *amos_page; /* vaddr of page of AMOs from MSPEC driver */ }; -#define XPC_VARS_ALIGNED_SIZE (L1_CACHE_ALIGN(sizeof(struct xpc_vars))) - #define XPC_V_VERSION _XPC_VERSION(3,1) /* version 3.1 of the cross vars */ #define XPC_SUPPORTS_DISENGAGE_REQUEST(_version) \ @@ -184,7 +211,7 @@ xpc_disallow_hb(partid_t partid, struct xpc_vars *vars) /* * The AMOs page consists of a number of AMO variables which are divided into * four groups, The first two groups are used to identify an IRQ's sender. - * These two groups consist of 64 and 16 AMO variables respectively. The last + * These two groups consist of 64 and 128 AMO variables respectively. The last * two groups, consisting of just one AMO variable each, are used to identify * the remote partitions that are currently engaged (from the viewpoint of * the XPC running on the remote partition). @@ -233,6 +260,16 @@ struct xpc_vars_part { #define XPC_VP_MAGIC2 0x0073726176435058L /* 'XPCvars\0'L (little endian) */ +/* the reserved page sizes and offsets */ + +#define XPC_RP_HEADER_SIZE L1_CACHE_ALIGN(sizeof(struct xpc_rsvd_page)) +#define XPC_RP_VARS_SIZE L1_CACHE_ALIGN(sizeof(struct xpc_vars)) + +#define XPC_RP_PART_NASIDS(_rp) (u64 *) ((u8 *) _rp + XPC_RP_HEADER_SIZE) +#define XPC_RP_MACH_NASIDS(_rp) (XPC_RP_PART_NASIDS(_rp) + xp_nasid_mask_words) +#define XPC_RP_VARS(_rp) ((struct xpc_vars *) XPC_RP_MACH_NASIDS(_rp) + xp_nasid_mask_words) +#define XPC_RP_VARS_PART(_rp) (struct xpc_vars_part *) ((u8 *) XPC_RP_VARS(rp) + XPC_RP_VARS_SIZE) + /* * Functions registered by add_timer() or called by kernel_thread() only @@ -1147,9 +1184,9 @@ xpc_IPI_send_local_msgrequest(struct xpc_channel *ch) * cacheable mapping for the entire region. This will prevent speculative * reading of cached copies of our lines from being issued which will cause * a PI FSB Protocol error to be generated by the SHUB. For XPC, we need 64 - * (XP_MAX_PARTITIONS) AMO variables for message notification and an - * additional 16 (XP_NASID_MASK_WORDS) AMO variables for partition activation - * and 2 AMO variables for partition deactivation. + * AMO variables (based on XP_MAX_PARTITIONS) for message notification and an + * additional 128 AMO variables (based on XP_NASID_MASK_WORDS) for partition + * activation and 2 AMO variables for partition deactivation. */ static inline AMO_t * xpc_IPI_init(int index) diff --git a/arch/ia64/sn/kernel/xpc_main.c b/arch/ia64/sn/kernel/xpc_main.c index db349c6d4c58..38f2c699192c 100644 --- a/arch/ia64/sn/kernel/xpc_main.c +++ b/arch/ia64/sn/kernel/xpc_main.c @@ -1049,11 +1049,11 @@ xpc_init(void) /* * xpc_remote_copy_buffer is used as a temporary buffer for bte_copy'ng - * both a partition's reserved page and its XPC variables. Its size was - * based on the size of a reserved page. So we need to ensure that the - * XPC variables will fit as well. + * various portions of a partition's reserved page. Its size is based + * on the size of the reserved page header and part_nasids mask. So we + * need to ensure that the other items will fit as well. */ - if (XPC_VARS_ALIGNED_SIZE > XPC_RSVD_PAGE_ALIGNED_SIZE) { + if (XPC_RP_VARS_SIZE > XPC_RP_HEADER_SIZE + XP_NASID_MASK_BYTES) { dev_err(xpc_part, "xpc_remote_copy_buffer is not big enough\n"); return -EPERM; } diff --git a/arch/ia64/sn/kernel/xpc_partition.c b/arch/ia64/sn/kernel/xpc_partition.c index 958488f55699..6bb1091f2a4d 100644 --- a/arch/ia64/sn/kernel/xpc_partition.c +++ b/arch/ia64/sn/kernel/xpc_partition.c @@ -47,13 +47,16 @@ static u64 xpc_sh2_IPI_access3; u64 xpc_prot_vec[MAX_COMPACT_NODES]; -/* this partition's reserved page */ +/* this partition's reserved page pointers */ struct xpc_rsvd_page *xpc_rsvd_page; - -/* this partition's XPC variables (within the reserved page) */ +static u64 *xpc_part_nasids; +static u64 *xpc_mach_nasids; struct xpc_vars *xpc_vars; struct xpc_vars_part *xpc_vars_part; +static int xp_nasid_mask_bytes; /* actual size in bytes of nasid mask */ +static int xp_nasid_mask_words; /* actual size in words of nasid mask */ + /* * For performance reasons, each entry of xpc_partitions[] is cacheline @@ -65,15 +68,16 @@ struct xpc_partition xpc_partitions[XP_MAX_PARTITIONS + 1]; /* - * Generic buffer used to store a local copy of the remote partitions - * reserved page or XPC variables. + * Generic buffer used to store a local copy of portions of a remote + * partition's reserved page (either its header and part_nasids mask, + * or its vars). * * xpc_discovery runs only once and is a seperate thread that is * very likely going to be processing in parallel with receiving * interrupts. */ -char ____cacheline_aligned - xpc_remote_copy_buffer[XPC_RSVD_PAGE_ALIGNED_SIZE]; +char ____cacheline_aligned xpc_remote_copy_buffer[XPC_RP_HEADER_SIZE + + XP_NASID_MASK_BYTES]; /* @@ -136,7 +140,7 @@ xpc_rsvd_page_init(void) { struct xpc_rsvd_page *rp; AMO_t *amos_page; - u64 rp_pa, next_cl, nasid_array = 0; + u64 rp_pa, nasid_array = 0; int i, ret; @@ -144,7 +148,8 @@ xpc_rsvd_page_init(void) rp_pa = xpc_get_rsvd_page_pa(cnodeid_to_nasid(0), (u64) xpc_remote_copy_buffer, - XPC_RSVD_PAGE_ALIGNED_SIZE); + XPC_RP_HEADER_SIZE + + L1_CACHE_BYTES); if (rp_pa == 0) { dev_err(xpc_part, "SAL failed to locate the reserved page\n"); return NULL; @@ -159,12 +164,19 @@ xpc_rsvd_page_init(void) rp->version = XPC_RP_VERSION; - /* - * Place the XPC variables on the cache line following the - * reserved page structure. - */ - next_cl = (u64) rp + XPC_RSVD_PAGE_ALIGNED_SIZE; - xpc_vars = (struct xpc_vars *) next_cl; + /* establish the actual sizes of the nasid masks */ + if (rp->SAL_version == 1) { + /* SAL_version 1 didn't set the nasids_size field */ + rp->nasids_size = 128; + } + xp_nasid_mask_bytes = rp->nasids_size; + xp_nasid_mask_words = xp_nasid_mask_bytes / 8; + + /* setup the pointers to the various items in the reserved page */ + xpc_part_nasids = XPC_RP_PART_NASIDS(rp); + xpc_mach_nasids = XPC_RP_MACH_NASIDS(rp); + xpc_vars = XPC_RP_VARS(rp); + xpc_vars_part = XPC_RP_VARS_PART(rp); /* * Before clearing xpc_vars, see if a page of AMOs had been previously @@ -216,26 +228,23 @@ xpc_rsvd_page_init(void) amos_page = (AMO_t *) TO_AMO((u64) amos_page); } + /* clear xpc_vars */ memset(xpc_vars, 0, sizeof(struct xpc_vars)); - /* - * Place the XPC per partition specific variables on the cache line - * following the XPC variables structure. - */ - next_cl += XPC_VARS_ALIGNED_SIZE; - memset((u64 *) next_cl, 0, sizeof(struct xpc_vars_part) * - XP_MAX_PARTITIONS); - xpc_vars_part = (struct xpc_vars_part *) next_cl; - xpc_vars->vars_part_pa = __pa(next_cl); - xpc_vars->version = XPC_V_VERSION; xpc_vars->act_nasid = cpuid_to_nasid(0); xpc_vars->act_phys_cpuid = cpu_physical_id(0); + xpc_vars->vars_part_pa = __pa(xpc_vars_part); + xpc_vars->amos_page_pa = ia64_tpa((u64) amos_page); xpc_vars->amos_page = amos_page; /* save for next load of XPC */ + /* clear xpc_vars_part */ + memset((u64 *) xpc_vars_part, 0, sizeof(struct xpc_vars_part) * + XP_MAX_PARTITIONS); + /* initialize the activate IRQ related AMO variables */ - for (i = 0; i < XP_NASID_MASK_WORDS; i++) { + for (i = 0; i < xp_nasid_mask_words; i++) { (void) xpc_IPI_init(XPC_ACTIVATE_IRQ_AMOS + i); } @@ -243,10 +252,7 @@ xpc_rsvd_page_init(void) (void) xpc_IPI_init(XPC_ENGAGED_PARTITIONS_AMO); (void) xpc_IPI_init(XPC_DISENGAGE_REQUEST_AMO); - /* export AMO page's physical address to other partitions */ - xpc_vars->amos_page_pa = ia64_tpa((u64) xpc_vars->amos_page); - - /* timestamp of when reserved page was initialized */ + /* timestamp of when reserved page was setup by XPC */ rp->stamp = CURRENT_TIME; /* @@ -406,7 +412,7 @@ xpc_check_remote_hb(void) /* pull the remote_hb cache line */ bres = xp_bte_copy(part->remote_vars_pa, ia64_tpa((u64) remote_vars), - XPC_VARS_ALIGNED_SIZE, + XPC_RP_VARS_SIZE, (BTE_NOTIFY | BTE_WACQUIRE), NULL); if (bres != BTE_SUCCESS) { XPC_DEACTIVATE_PARTITION(part, @@ -434,10 +440,11 @@ xpc_check_remote_hb(void) /* - * Get a copy of the remote partition's rsvd page. + * Get a copy of a portion of the remote partition's rsvd page. * * remote_rp points to a buffer that is cacheline aligned for BTE copies and - * assumed to be of size XPC_RSVD_PAGE_ALIGNED_SIZE. + * is large enough to contain a copy of their reserved page header and + * part_nasids mask. */ static enum xpc_retval xpc_get_remote_rp(int nasid, u64 *discovered_nasids, @@ -449,16 +456,17 @@ xpc_get_remote_rp(int nasid, u64 *discovered_nasids, /* get the reserved page's physical address */ *remote_rp_pa = xpc_get_rsvd_page_pa(nasid, (u64) remote_rp, - XPC_RSVD_PAGE_ALIGNED_SIZE); + XPC_RP_HEADER_SIZE + + xp_nasid_mask_bytes); if (*remote_rp_pa == 0) { return xpcNoRsvdPageAddr; } - /* pull over the reserved page structure */ + /* pull over the reserved page header and part_nasids mask */ bres = xp_bte_copy(*remote_rp_pa, ia64_tpa((u64) remote_rp), - XPC_RSVD_PAGE_ALIGNED_SIZE, + XPC_RP_HEADER_SIZE + xp_nasid_mask_bytes, (BTE_NOTIFY | BTE_WACQUIRE), NULL); if (bres != BTE_SUCCESS) { return xpc_map_bte_errors(bres); @@ -466,8 +474,11 @@ xpc_get_remote_rp(int nasid, u64 *discovered_nasids, if (discovered_nasids != NULL) { - for (i = 0; i < XP_NASID_MASK_WORDS; i++) { - discovered_nasids[i] |= remote_rp->part_nasids[i]; + u64 *remote_part_nasids = XPC_RP_PART_NASIDS(remote_rp); + + + for (i = 0; i < xp_nasid_mask_words; i++) { + discovered_nasids[i] |= remote_part_nasids[i]; } } @@ -494,10 +505,10 @@ xpc_get_remote_rp(int nasid, u64 *discovered_nasids, /* - * Get a copy of the remote partition's XPC variables. + * Get a copy of the remote partition's XPC variables from the reserved page. * * remote_vars points to a buffer that is cacheline aligned for BTE copies and - * assumed to be of size XPC_VARS_ALIGNED_SIZE. + * assumed to be of size XPC_RP_VARS_SIZE. */ static enum xpc_retval xpc_get_remote_vars(u64 remote_vars_pa, struct xpc_vars *remote_vars) @@ -513,7 +524,7 @@ xpc_get_remote_vars(u64 remote_vars_pa, struct xpc_vars *remote_vars) /* pull over the cross partition variables */ bres = xp_bte_copy(remote_vars_pa, ia64_tpa((u64) remote_vars), - XPC_VARS_ALIGNED_SIZE, + XPC_RP_VARS_SIZE, (BTE_NOTIFY | BTE_WACQUIRE), NULL); if (bres != BTE_SUCCESS) { return xpc_map_bte_errors(bres); @@ -778,14 +789,13 @@ xpc_identify_act_IRQ_sender(void) u64 nasid; /* remote nasid */ int n_IRQs_detected = 0; AMO_t *act_amos; - struct xpc_rsvd_page *rp = (struct xpc_rsvd_page *) xpc_rsvd_page; act_amos = xpc_vars->amos_page + XPC_ACTIVATE_IRQ_AMOS; /* scan through act AMO variable looking for non-zero entries */ - for (word = 0; word < XP_NASID_MASK_WORDS; word++) { + for (word = 0; word < xp_nasid_mask_words; word++) { if (xpc_exiting) { break; @@ -807,7 +817,7 @@ xpc_identify_act_IRQ_sender(void) * remote nasid in our reserved pages machine mask. * This is used in the event of module reload. */ - rp->mach_nasids[word] |= nasid_mask; + xpc_mach_nasids[word] |= nasid_mask; /* locate the nasid(s) which sent interrupts */ @@ -992,6 +1002,7 @@ xpc_discovery(void) u64 remote_rp_pa; u64 remote_vars_pa; int region; + int region_size; int max_regions; int nasid; struct xpc_rsvd_page *rp; @@ -1001,7 +1012,8 @@ xpc_discovery(void) enum xpc_retval ret; - remote_rp = xpc_kmalloc_cacheline_aligned(XPC_RSVD_PAGE_ALIGNED_SIZE, + remote_rp = xpc_kmalloc_cacheline_aligned(XPC_RP_HEADER_SIZE + + xp_nasid_mask_bytes, GFP_KERNEL, &remote_rp_base); if (remote_rp == NULL) { return; @@ -1009,13 +1021,13 @@ xpc_discovery(void) remote_vars = (struct xpc_vars *) remote_rp; - discovered_nasids = kmalloc(sizeof(u64) * XP_NASID_MASK_WORDS, + discovered_nasids = kmalloc(sizeof(u64) * xp_nasid_mask_words, GFP_KERNEL); if (discovered_nasids == NULL) { kfree(remote_rp_base); return; } - memset(discovered_nasids, 0, sizeof(u64) * XP_NASID_MASK_WORDS); + memset(discovered_nasids, 0, sizeof(u64) * xp_nasid_mask_words); rp = (struct xpc_rsvd_page *) xpc_rsvd_page; @@ -1024,11 +1036,19 @@ xpc_discovery(void) * nodes that can comprise an access protection grouping. The access * protection is in regards to memory, IOI and IPI. */ -//>>> move the next two #defines into either include/asm-ia64/sn/arch.h or -//>>> include/asm-ia64/sn/addrs.h -#define SH1_MAX_REGIONS 64 -#define SH2_MAX_REGIONS 256 - max_regions = is_shub2() ? SH2_MAX_REGIONS : SH1_MAX_REGIONS; + max_regions = 64; + region_size = sn_region_size; + + switch (region_size) { + case 128: + max_regions *= 2; + case 64: + max_regions *= 2; + case 32: + max_regions *= 2; + region_size = 16; + DBUG_ON(!is_shub2()); + } for (region = 0; region < max_regions; region++) { @@ -1038,8 +1058,8 @@ xpc_discovery(void) dev_dbg(xpc_part, "searching region %d\n", region); - for (nasid = (region * sn_region_size * 2); - nasid < ((region + 1) * sn_region_size * 2); + for (nasid = (region * region_size * 2); + nasid < ((region + 1) * region_size * 2); nasid += 2) { if ((volatile int) xpc_exiting) { @@ -1049,14 +1069,14 @@ xpc_discovery(void) dev_dbg(xpc_part, "checking nasid %d\n", nasid); - if (XPC_NASID_IN_ARRAY(nasid, rp->part_nasids)) { + if (XPC_NASID_IN_ARRAY(nasid, xpc_part_nasids)) { dev_dbg(xpc_part, "PROM indicates Nasid %d is " "part of the local partition; skipping " "region\n", nasid); break; } - if (!(XPC_NASID_IN_ARRAY(nasid, rp->mach_nasids))) { + if (!(XPC_NASID_IN_ARRAY(nasid, xpc_mach_nasids))) { dev_dbg(xpc_part, "PROM indicates Nasid %d was " "not on Numa-Link network at reset\n", nasid); @@ -1178,12 +1198,12 @@ xpc_initiate_partid_to_nasids(partid_t partid, void *nasid_mask) return xpcPartitionDown; } - part_nasid_pa = part->remote_rp_pa + - (u64) &((struct xpc_rsvd_page *) 0)->part_nasids; + memset(nasid_mask, 0, XP_NASID_MASK_BYTES); + + part_nasid_pa = (u64) XPC_RP_PART_NASIDS(part->remote_rp_pa); bte_res = xp_bte_copy(part_nasid_pa, ia64_tpa((u64) nasid_mask), - L1_CACHE_ALIGN(XP_NASID_MASK_BYTES), - (BTE_NOTIFY | BTE_WACQUIRE), NULL); + xp_nasid_mask_bytes, (BTE_NOTIFY | BTE_WACQUIRE), NULL); return xpc_map_bte_errors(bte_res); } -- cgit v1.2.2 From 279290294662d4a35d209fb7d7c46523cfa3d63d Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Tue, 25 Oct 2005 14:11:53 -0500 Subject: [IA64-SGI] cleanup the way XPC locates the reserved page Eliminate the passing in of a scratch buffer used for locating the reserved page setup for XPC. Signed-off-by: Dean Nelson Signed-off-by: Tony Luck --- arch/ia64/sn/kernel/xpc_partition.c | 39 ++++++++++++++++++++++++------------- 1 file changed, 26 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/ia64/sn/kernel/xpc_partition.c b/arch/ia64/sn/kernel/xpc_partition.c index 6bb1091f2a4d..ce5a37ff4388 100644 --- a/arch/ia64/sn/kernel/xpc_partition.c +++ b/arch/ia64/sn/kernel/xpc_partition.c @@ -85,13 +85,16 @@ char ____cacheline_aligned xpc_remote_copy_buffer[XPC_RP_HEADER_SIZE + * for that nasid. This function returns 0 on any error. */ static u64 -xpc_get_rsvd_page_pa(int nasid, u64 buf, u64 buf_size) +xpc_get_rsvd_page_pa(int nasid) { bte_result_t bte_res; s64 status; u64 cookie = 0; u64 rp_pa = nasid; /* seed with nasid */ u64 len = 0; + u64 buf = buf; + u64 buf_len = 0; + void *buf_base = NULL; while (1) { @@ -107,13 +110,22 @@ xpc_get_rsvd_page_pa(int nasid, u64 buf, u64 buf_size) break; } - if (len > buf_size) { - dev_err(xpc_part, "len (=0x%016lx) > buf_size\n", len); - status = SALRET_ERROR; - break; + if (L1_CACHE_ALIGN(len) > buf_len) { + if (buf_base != NULL) { + kfree(buf_base); + } + buf_len = L1_CACHE_ALIGN(len); + buf = (u64) xpc_kmalloc_cacheline_aligned(buf_len, + GFP_KERNEL, &buf_base); + if (buf_base == NULL) { + dev_err(xpc_part, "unable to kmalloc " + "len=0x%016lx\n", buf_len); + status = SALRET_ERROR; + break; + } } - bte_res = xp_bte_copy(rp_pa, ia64_tpa(buf), buf_size, + bte_res = xp_bte_copy(rp_pa, ia64_tpa(buf), buf_len, (BTE_NOTIFY | BTE_WACQUIRE), NULL); if (bte_res != BTE_SUCCESS) { dev_dbg(xpc_part, "xp_bte_copy failed %i\n", bte_res); @@ -122,6 +134,10 @@ xpc_get_rsvd_page_pa(int nasid, u64 buf, u64 buf_size) } } + if (buf_base != NULL) { + kfree(buf_base); + } + if (status != SALRET_OK) { rp_pa = 0; } @@ -146,10 +162,9 @@ xpc_rsvd_page_init(void) /* get the local reserved page's address */ - rp_pa = xpc_get_rsvd_page_pa(cnodeid_to_nasid(0), - (u64) xpc_remote_copy_buffer, - XPC_RP_HEADER_SIZE + - L1_CACHE_BYTES); + preempt_disable(); + rp_pa = xpc_get_rsvd_page_pa(cpuid_to_nasid(smp_processor_id())); + preempt_enable(); if (rp_pa == 0) { dev_err(xpc_part, "SAL failed to locate the reserved page\n"); return NULL; @@ -455,9 +470,7 @@ xpc_get_remote_rp(int nasid, u64 *discovered_nasids, /* get the reserved page's physical address */ - *remote_rp_pa = xpc_get_rsvd_page_pa(nasid, (u64) remote_rp, - XPC_RP_HEADER_SIZE + - xp_nasid_mask_bytes); + *remote_rp_pa = xpc_get_rsvd_page_pa(nasid); if (*remote_rp_pa == 0) { return xpcNoRsvdPageAddr; } -- cgit v1.2.2 From e7f98dbbb89b68b23a5115708412a820a713fbf1 Mon Sep 17 00:00:00 2001 From: Russ Anderson Date: Tue, 25 Oct 2005 17:34:19 -0500 Subject: [IA64-SGI] fix bte_copy() calling get_nasid() while preemptible bte_copy() calls calls get_nasid(), which will get flagged if preemption if enabled. raw_smp_processor_id() is used instead. It is OK if we migrate off node. Signed-off-by: Russ Anderson (rja@sgi.com) Signed-off-by: Tony Luck --- arch/ia64/sn/kernel/bte.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/sn/kernel/bte.c b/arch/ia64/sn/kernel/bte.c index 45854c637e9c..d71f4de44f79 100644 --- a/arch/ia64/sn/kernel/bte.c +++ b/arch/ia64/sn/kernel/bte.c @@ -87,7 +87,7 @@ bte_result_t bte_copy(u64 src, u64 dest, u64 len, u64 mode, void *notification) unsigned long irq_flags; unsigned long itc_end = 0; int nasid_to_try[MAX_NODES_TO_TRY]; - int my_nasid = get_nasid(); + int my_nasid = cpuid_to_nasid(raw_smp_processor_id()); int bte_if_index, nasid_index; int bte_first, btes_per_node = BTES_PER_NODE; -- cgit v1.2.2 From c1902aae322952f8726469a6657df7b9d5c794fe Mon Sep 17 00:00:00 2001 From: Dean Roe Date: Thu, 27 Oct 2005 15:41:04 -0500 Subject: [IA64] - Avoid slow TLB purges on SGI Altix systems flush_tlb_all() can be a scaling issue on large SGI Altix systems since it uses the global call_lock and always executes on all cpus. When a process enters flush_tlb_range() to purge TLBs for another process, it is possible to avoid flush_tlb_all() and instead allow sn2_global_tlb_purge() to purge TLBs only where necessary. This patch modifies flush_tlb_range() so that this case can be handled by platform TLB purge functions and updates ia64_global_tlb_purge() accordingly. sn2_global_tlb_purge() now calculates the region register value from the mm argument introduced with this patch. Signed-off-by: Dean Roe Signed-off-by: Tony Luck --- arch/ia64/mm/tlb.c | 16 +++++++++------- arch/ia64/sn/kernel/sn2/sn2_smp.c | 31 +++++++++++++++++++------------ 2 files changed, 28 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/ia64/mm/tlb.c b/arch/ia64/mm/tlb.c index 464557e4ed82..99ea8c70f408 100644 --- a/arch/ia64/mm/tlb.c +++ b/arch/ia64/mm/tlb.c @@ -86,10 +86,15 @@ wrap_mmu_context (struct mm_struct *mm) } void -ia64_global_tlb_purge (unsigned long start, unsigned long end, unsigned long nbits) +ia64_global_tlb_purge (struct mm_struct *mm, unsigned long start, unsigned long end, unsigned long nbits) { static DEFINE_SPINLOCK(ptcg_lock); + if (mm != current->active_mm) { + flush_tlb_all(); + return; + } + /* HW requires global serialization of ptc.ga. */ spin_lock(&ptcg_lock); { @@ -135,15 +140,12 @@ flush_tlb_range (struct vm_area_struct *vma, unsigned long start, unsigned long unsigned long size = end - start; unsigned long nbits; +#ifndef CONFIG_SMP if (mm != current->active_mm) { - /* this does happen, but perhaps it's not worth optimizing for? */ -#ifdef CONFIG_SMP - flush_tlb_all(); -#else mm->context = 0; -#endif return; } +#endif nbits = ia64_fls(size + 0xfff); while (unlikely (((1UL << nbits) & purge.mask) == 0) && (nbits < purge.max_bits)) @@ -153,7 +155,7 @@ flush_tlb_range (struct vm_area_struct *vma, unsigned long start, unsigned long start &= ~((1UL << nbits) - 1); # ifdef CONFIG_SMP - platform_global_tlb_purge(start, end, nbits); + platform_global_tlb_purge(mm, start, end, nbits); # else do { ia64_ptcl(start, (nbits<<2)); diff --git a/arch/ia64/sn/kernel/sn2/sn2_smp.c b/arch/ia64/sn/kernel/sn2/sn2_smp.c index 0a4ee50c302f..49b530c39a42 100644 --- a/arch/ia64/sn/kernel/sn2/sn2_smp.c +++ b/arch/ia64/sn/kernel/sn2/sn2_smp.c @@ -177,6 +177,7 @@ void sn_tlb_migrate_finish(struct mm_struct *mm) /** * sn2_global_tlb_purge - globally purge translation cache of virtual address range + * @mm: mm_struct containing virtual address range * @start: start of virtual address range * @end: end of virtual address range * @nbits: specifies number of bytes to purge per instruction (num = 1<<(nbits & 0xfc)) @@ -188,21 +189,22 @@ void sn_tlb_migrate_finish(struct mm_struct *mm) * - cpu_vm_mask is a bit mask that indicates which cpus have loaded the context. * - cpu_vm_mask is converted into a nodemask of the nodes containing the * cpus in cpu_vm_mask. - * - if only one bit is set in cpu_vm_mask & it is the current cpu, - * then only the local TLB needs to be flushed. This flushing can be done - * using ptc.l. This is the common case & avoids the global spinlock. + * - if only one bit is set in cpu_vm_mask & it is the current cpu & the + * process is purging its own virtual address range, then only the + * local TLB needs to be flushed. This flushing can be done using + * ptc.l. This is the common case & avoids the global spinlock. * - if multiple cpus have loaded the context, then flushing has to be * done with ptc.g/MMRs under protection of the global ptc_lock. */ void -sn2_global_tlb_purge(unsigned long start, unsigned long end, - unsigned long nbits) +sn2_global_tlb_purge(struct mm_struct *mm, unsigned long start, + unsigned long end, unsigned long nbits) { int i, opt, shub1, cnode, mynasid, cpu, lcpu = 0, nasid, flushed = 0; + int mymm = (mm == current->active_mm); volatile unsigned long *ptc0, *ptc1; - unsigned long itc, itc2, flags, data0 = 0, data1 = 0; - struct mm_struct *mm = current->active_mm; + unsigned long itc, itc2, flags, data0 = 0, data1 = 0, rr_value; short nasids[MAX_NUMNODES], nix; nodemask_t nodes_flushed; @@ -216,9 +218,12 @@ sn2_global_tlb_purge(unsigned long start, unsigned long end, i++; } + if (i == 0) + return; + preempt_disable(); - if (likely(i == 1 && lcpu == smp_processor_id())) { + if (likely(i == 1 && lcpu == smp_processor_id() && mymm)) { do { ia64_ptcl(start, nbits << 2); start += (1UL << nbits); @@ -229,7 +234,7 @@ sn2_global_tlb_purge(unsigned long start, unsigned long end, return; } - if (atomic_read(&mm->mm_users) == 1) { + if (atomic_read(&mm->mm_users) == 1 && mymm) { flush_tlb_mm(mm); __get_cpu_var(ptcstats).change_rid++; preempt_enable(); @@ -241,11 +246,13 @@ sn2_global_tlb_purge(unsigned long start, unsigned long end, for_each_node_mask(cnode, nodes_flushed) nasids[nix++] = cnodeid_to_nasid(cnode); + rr_value = (mm->context << 3) | REGION_NUMBER(start); + shub1 = is_shub1(); if (shub1) { data0 = (1UL << SH1_PTC_0_A_SHFT) | (nbits << SH1_PTC_0_PS_SHFT) | - ((ia64_get_rr(start) >> 8) << SH1_PTC_0_RID_SHFT) | + (rr_value << SH1_PTC_0_RID_SHFT) | (1UL << SH1_PTC_0_START_SHFT); ptc0 = (long *)GLOBAL_MMR_PHYS_ADDR(0, SH1_PTC_0); ptc1 = (long *)GLOBAL_MMR_PHYS_ADDR(0, SH1_PTC_1); @@ -254,7 +261,7 @@ sn2_global_tlb_purge(unsigned long start, unsigned long end, (nbits << SH2_PTC_PS_SHFT) | (1UL << SH2_PTC_START_SHFT); ptc0 = (long *)GLOBAL_MMR_PHYS_ADDR(0, SH2_PTC + - ((ia64_get_rr(start) >> 8) << SH2_PTC_RID_SHFT) ); + (rr_value << SH2_PTC_RID_SHFT)); ptc1 = NULL; } @@ -275,7 +282,7 @@ sn2_global_tlb_purge(unsigned long start, unsigned long end, data0 = (data0 & ~SH2_PTC_ADDR_MASK) | (start & SH2_PTC_ADDR_MASK); for (i = 0; i < nix; i++) { nasid = nasids[i]; - if ((!(sn2_ptctest & 3)) && unlikely(nasid == mynasid)) { + if ((!(sn2_ptctest & 3)) && unlikely(nasid == mynasid && mymm)) { ia64_ptcga(start, nbits << 2); ia64_srlz_i(); } else { -- cgit v1.2.2 From 4ac0068f44f192f2de95a7bb36df3e19767a45fb Mon Sep 17 00:00:00 2001 From: Cliff Wickman Date: Thu, 27 Oct 2005 10:29:08 -0500 Subject: [IA64] ptrace - find memory sharers on children list In arch/ia64/kernel/ptrace.c there is a test for a peek or poke of a register image (in register backing storage). The test can be unnecessarily long (and occurs while holding the tasklist_lock). Especially long on a large system with thousands of active tasks. The ptrace caller (presumably a debugger) specifies the pid of its target and an address to peek or poke. But the debugger could be attached to several tasks. The idea of find_thread_for_addr() is to find whether the target address is in the RBS for any of those tasks. Currently it searches the thread-list of the target pid. If that search does not find a match, and the shared mm-struct's user count indicates that there are other tasks sharing this address space (a rare occurrence), a search is made of all the tasks in the system. Another approach can drastically shorten this procedure. It depends upon the fact that in order to peek or poke from/to any task, the debugger must first attach to that task. And when it does, the attached task is made a child of the debugger (is chained to its children list). Therefore we can search just the debugger's children list. Signed-off-by: Cliff Wickman Signed-off-by: Tony Luck --- arch/ia64/kernel/ptrace.c | 26 ++++++++++---------------- 1 file changed, 10 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c index bbb8bc7c0552..9a9c1bd01dbc 100644 --- a/arch/ia64/kernel/ptrace.c +++ b/arch/ia64/kernel/ptrace.c @@ -589,6 +589,7 @@ find_thread_for_addr (struct task_struct *child, unsigned long addr) { struct task_struct *g, *p; struct mm_struct *mm; + struct list_head *this, *next; int mm_users; if (!(mm = get_task_mm(child))) @@ -600,28 +601,21 @@ find_thread_for_addr (struct task_struct *child, unsigned long addr) goto out; /* not multi-threaded */ /* - * First, traverse the child's thread-list. Good for scalability with - * NPTL-threads. + * Traverse the current process' children list. Every task that + * one attaches to becomes a child. And it is only attached children + * of the debugger that are of interest (ptrace_check_attach checks + * for this). */ - p = child; - do { - if (thread_matches(p, addr)) { - child = p; - goto out; - } - if (mm_users-- <= 1) - goto out; - } while ((p = next_thread(p)) != child); - - do_each_thread(g, p) { - if (child->mm != mm) + list_for_each_safe(this, next, ¤t->children) { + p = list_entry(this, struct task_struct, sibling); + if (p->mm != mm) continue; - if (thread_matches(p, addr)) { child = p; goto out; } - } while_each_thread(g, p); + } + out: mmput(mm); return child; -- cgit v1.2.2 From 0e1f60609258e18ec0a0477c646101212822d387 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Fri, 28 Oct 2005 15:52:13 -0700 Subject: [IA64] fix warning unused variable `g' 4ac0068f44f192f2de95a7bb36df3e19767a45fb forgot to delete the declaration of this variable which is no longer used. Signed-off-by: Tony Luck --- arch/ia64/kernel/ptrace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c index 9a9c1bd01dbc..4b19d0410632 100644 --- a/arch/ia64/kernel/ptrace.c +++ b/arch/ia64/kernel/ptrace.c @@ -587,7 +587,7 @@ thread_matches (struct task_struct *thread, unsigned long addr) static struct task_struct * find_thread_for_addr (struct task_struct *child, unsigned long addr) { - struct task_struct *g, *p; + struct task_struct *p; struct mm_struct *mm; struct list_head *this, *next; int mm_users; -- cgit v1.2.2