From 7c63dedcc52c8c1253b1deec387102ef788ed0b4 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Mon, 20 Dec 2010 15:00:17 -0800 Subject: msm: qsd8x50: Platform data isn't init data Remove the SMC91x platform and resource data from initdata. These will continue to be accessed after init, and must remain available. Signed-off-by: Stephen Boyd Signed-off-by: David Brown --- arch/arm/mach-msm/board-qsd8x50.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c index ed2af4ad97ed..39925c1a819d 100644 --- a/arch/arm/mach-msm/board-qsd8x50.c +++ b/arch/arm/mach-msm/board-qsd8x50.c @@ -42,7 +42,7 @@ static const unsigned qsd8x50_surf_smc91x_gpio __initdata = 156; * at run-time: they vary from board to board, and the true * configuration won't be known until boot. */ -static struct resource smc91x_resources[] __initdata = { +static struct resource smc91x_resources[] = { [0] = { .flags = IORESOURCE_MEM, }, @@ -51,7 +51,7 @@ static struct resource smc91x_resources[] __initdata = { }, }; -static struct platform_device smc91x_device __initdata = { +static struct platform_device smc91x_device = { .name = "smc91x", .id = 0, .num_resources = ARRAY_SIZE(smc91x_resources), -- cgit v1.2.2 From 2485b6464cf86a5bc361666838f2439c99c00567 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Tue, 11 Jan 2011 18:54:53 +0100 Subject: x86,percpu: Move out of place 64 bit ops into X86_64 section Some operations that operate on 64 bit operands are defined for 32 bit. Move them into the correct section. Signed-off-by: Christoph Lameter Signed-off-by: Tejun Heo --- arch/x86/include/asm/percpu.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h index 8ee45167e817..3788f4649db4 100644 --- a/arch/x86/include/asm/percpu.h +++ b/arch/x86/include/asm/percpu.h @@ -414,8 +414,6 @@ do { \ #define this_cpu_xchg_1(pcp, nval) percpu_xchg_op(pcp, nval) #define this_cpu_xchg_2(pcp, nval) percpu_xchg_op(pcp, nval) #define this_cpu_xchg_4(pcp, nval) percpu_xchg_op(pcp, nval) -#define this_cpu_xchg_8(pcp, nval) percpu_xchg_op(pcp, nval) -#define this_cpu_cmpxchg_8(pcp, oval, nval) percpu_cmpxchg_op(pcp, oval, nval) #define irqsafe_cpu_add_1(pcp, val) percpu_add_op((pcp), val) #define irqsafe_cpu_add_2(pcp, val) percpu_add_op((pcp), val) @@ -432,8 +430,6 @@ do { \ #define irqsafe_cpu_xchg_1(pcp, nval) percpu_xchg_op(pcp, nval) #define irqsafe_cpu_xchg_2(pcp, nval) percpu_xchg_op(pcp, nval) #define irqsafe_cpu_xchg_4(pcp, nval) percpu_xchg_op(pcp, nval) -#define irqsafe_cpu_xchg_8(pcp, nval) percpu_xchg_op(pcp, nval) -#define irqsafe_cpu_cmpxchg_8(pcp, oval, nval) percpu_cmpxchg_op(pcp, oval, nval) #ifndef CONFIG_M386 #define __this_cpu_add_return_1(pcp, val) percpu_add_return_op(pcp, val) @@ -475,11 +471,15 @@ do { \ #define this_cpu_or_8(pcp, val) percpu_to_op("or", (pcp), val) #define this_cpu_xor_8(pcp, val) percpu_to_op("xor", (pcp), val) #define this_cpu_add_return_8(pcp, val) percpu_add_return_op(pcp, val) +#define this_cpu_xchg_8(pcp, nval) percpu_xchg_op(pcp, nval) +#define this_cpu_cmpxchg_8(pcp, oval, nval) percpu_cmpxchg_op(pcp, oval, nval) #define irqsafe_cpu_add_8(pcp, val) percpu_add_op((pcp), val) #define irqsafe_cpu_and_8(pcp, val) percpu_to_op("and", (pcp), val) #define irqsafe_cpu_or_8(pcp, val) percpu_to_op("or", (pcp), val) #define irqsafe_cpu_xor_8(pcp, val) percpu_to_op("xor", (pcp), val) +#define irqsafe_cpu_xchg_8(pcp, nval) percpu_xchg_op(pcp, nval) +#define irqsafe_cpu_cmpxchg_8(pcp, oval, nval) percpu_cmpxchg_op(pcp, oval, nval) #endif /* This is not atomic against other CPUs -- CPU preemption needs to be off */ -- cgit v1.2.2 From 86985db66ea2fda174615be05112a7d1b13645c4 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 3 Nov 2010 17:35:31 +0800 Subject: powerpc/85xx: add e500 HID1 bit definition Also make 74xx HID1 definition conditional. Signed-off-by: Li Yang Signed-off-by: Shaohui Xie Cc: Roy Zang Cc: Alexandre Bounine Signed-off-by: Kumar Gala --- arch/powerpc/include/asm/reg.h | 2 ++ arch/powerpc/include/asm/reg_booke.h | 14 ++++++++++++++ 2 files changed, 16 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index ff0005eec7dd..125fc1ad665d 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -283,6 +283,7 @@ #define HID0_NOPTI (1<<0) /* No-op dcbt and dcbst instr. */ #define SPRN_HID1 0x3F1 /* Hardware Implementation Register 1 */ +#ifdef CONFIG_6xx #define HID1_EMCP (1<<31) /* 7450 Machine Check Pin Enable */ #define HID1_DFS (1<<22) /* 7447A Dynamic Frequency Scaling */ #define HID1_PC0 (1<<16) /* 7450 PLL_CFG[0] */ @@ -292,6 +293,7 @@ #define HID1_SYNCBE (1<<11) /* 7450 ABE for sync, eieio */ #define HID1_ABE (1<<10) /* 7450 Address Broadcast Enable */ #define HID1_PS (1<<16) /* 750FX PLL selection */ +#endif #define SPRN_HID2 0x3F8 /* Hardware Implementation Register 2 */ #define SPRN_HID2_GEKKO 0x398 /* Gekko HID2 Register */ #define SPRN_IABR 0x3F2 /* Instruction Address Breakpoint Register */ diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h index 667a498eaee1..e68c69bf741a 100644 --- a/arch/powerpc/include/asm/reg_booke.h +++ b/arch/powerpc/include/asm/reg_booke.h @@ -246,6 +246,20 @@ store or cache line push */ #endif +/* Bit definitions for the HID1 */ +#ifdef CONFIG_E500 +/* e500v1/v2 */ +#define HID1_PLL_CFG_MASK 0xfc000000 /* PLL_CFG input pins */ +#define HID1_RFXE 0x00020000 /* Read fault exception enable */ +#define HID1_R1DPE 0x00008000 /* R1 data bus parity enable */ +#define HID1_R2DPE 0x00004000 /* R2 data bus parity enable */ +#define HID1_ASTME 0x00002000 /* Address bus streaming mode enable */ +#define HID1_ABE 0x00001000 /* Address broadcast enable */ +#define HID1_MPXTT 0x00000400 /* MPX re-map transfer type */ +#define HID1_ATS 0x00000080 /* Atomic status */ +#define HID1_MID_MASK 0x0000000f /* MID input pins */ +#endif + /* Bit definitions for the DBSR. */ /* * DBSR bits which have conflicting definitions on true Book E versus IBM 40x. -- cgit v1.2.2 From b5fb0cc7f1c90e3b00d40b64681efcbf8bcdeb9e Mon Sep 17 00:00:00 2001 From: Shaohui Xie Date: Wed, 3 Nov 2010 17:36:37 +0800 Subject: powerpc/fsl_rio: Fix non-standard HID1 register access Moved setting of RFXE bit so we get machine checks on RIO errors into cpu_setup so that the RIO code isn't core specific. Signed-off-by: Shaohui Xie Cc: Li Yang Cc: Roy Zang Cc: Alexandre Bounine Signed-off-by: Kumar Gala --- arch/powerpc/kernel/cpu_setup_fsl_booke.S | 6 ++++++ arch/powerpc/sysdev/fsl_rio.c | 2 -- 2 files changed, 6 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/cpu_setup_fsl_booke.S b/arch/powerpc/kernel/cpu_setup_fsl_booke.S index 894e64fa481e..5c518ad3445c 100644 --- a/arch/powerpc/kernel/cpu_setup_fsl_booke.S +++ b/arch/powerpc/kernel/cpu_setup_fsl_booke.S @@ -64,6 +64,12 @@ _GLOBAL(__setup_cpu_e500v2) bl __e500_icache_setup bl __e500_dcache_setup bl __setup_e500_ivors +#ifdef CONFIG_RAPIDIO + /* Ensure that RFXE is set */ + mfspr r3,SPRN_HID1 + oris r3,r3,HID1_RFXE@h + mtspr SPRN_HID1,r3 +#endif mtlr r4 blr _GLOBAL(__setup_cpu_e500mc) diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c index 9725369d432a..4c518d17ee9b 100644 --- a/arch/powerpc/sysdev/fsl_rio.c +++ b/arch/powerpc/sysdev/fsl_rio.c @@ -1556,8 +1556,6 @@ int fsl_rio_setup(struct platform_device *dev) saved_mcheck_exception = ppc_md.machine_check_exception; ppc_md.machine_check_exception = fsl_rio_mcheck_exception; #endif - /* Ensure that RFXE is set */ - mtspr(SPRN_HID1, (mfspr(SPRN_HID1) | 0x20000)); return 0; err: -- cgit v1.2.2 From fd066e850351e21d1b385cde35fadf66761bc053 Mon Sep 17 00:00:00 2001 From: Ilya Yanok Date: Wed, 27 Oct 2010 02:02:36 +0200 Subject: powerpc/mpc8308: fix USB DR controller initialization MPC8308 has ULPI pin muxing settings in SICRH register, bits 17-18 which is different from both MPC8313 and MPC8315. Also MPC8308 doesn't have REFSEL, UTMI_PHY_EN and OTG_PORT fields in the USB DR controller CONTROL register. Signed-off-by: Ilya Yanok Tested-by: Wolfgang Denk Acked-by: Wolfgang Denk Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8308rdb.dts | 2 +- arch/powerpc/platforms/83xx/mpc83xx.h | 2 ++ arch/powerpc/platforms/83xx/usb.c | 21 ++++++++++++++++----- 3 files changed, 19 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mpc8308rdb.dts b/arch/powerpc/boot/dts/mpc8308rdb.dts index a97eb2db5a18..1e2b88899443 100644 --- a/arch/powerpc/boot/dts/mpc8308rdb.dts +++ b/arch/powerpc/boot/dts/mpc8308rdb.dts @@ -109,7 +109,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - compatible = "fsl,mpc8315-immr", "simple-bus"; + compatible = "fsl,mpc8308-immr", "simple-bus"; ranges = <0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <0>; diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h index 0fea8811d45b..82a434510d83 100644 --- a/arch/powerpc/platforms/83xx/mpc83xx.h +++ b/arch/powerpc/platforms/83xx/mpc83xx.h @@ -35,6 +35,8 @@ /* system i/o configuration register high */ #define MPC83XX_SICRH_OFFS 0x118 +#define MPC8308_SICRH_USB_MASK 0x000c0000 +#define MPC8308_SICRH_USB_ULPI 0x00040000 #define MPC834X_SICRH_USB_UTMI 0x00020000 #define MPC831X_SICRH_USB_MASK 0x000000e0 #define MPC831X_SICRH_USB_ULPI 0x000000a0 diff --git a/arch/powerpc/platforms/83xx/usb.c b/arch/powerpc/platforms/83xx/usb.c index 3ba4bb7d41bb..2c64164722d0 100644 --- a/arch/powerpc/platforms/83xx/usb.c +++ b/arch/powerpc/platforms/83xx/usb.c @@ -127,7 +127,8 @@ int mpc831x_usb_cfg(void) /* Configure clock */ immr_node = of_get_parent(np); - if (immr_node && of_device_is_compatible(immr_node, "fsl,mpc8315-immr")) + if (immr_node && (of_device_is_compatible(immr_node, "fsl,mpc8315-immr") || + of_device_is_compatible(immr_node, "fsl,mpc8308-immr"))) clrsetbits_be32(immap + MPC83XX_SCCR_OFFS, MPC8315_SCCR_USB_MASK, MPC8315_SCCR_USB_DRCM_01); @@ -138,7 +139,11 @@ int mpc831x_usb_cfg(void) /* Configure pin mux for ULPI. There is no pin mux for UTMI */ if (prop && !strcmp(prop, "ulpi")) { - if (of_device_is_compatible(immr_node, "fsl,mpc8315-immr")) { + if (of_device_is_compatible(immr_node, "fsl,mpc8308-immr")) { + clrsetbits_be32(immap + MPC83XX_SICRH_OFFS, + MPC8308_SICRH_USB_MASK, + MPC8308_SICRH_USB_ULPI); + } else if (of_device_is_compatible(immr_node, "fsl,mpc8315-immr")) { clrsetbits_be32(immap + MPC83XX_SICRL_OFFS, MPC8315_SICRL_USB_MASK, MPC8315_SICRL_USB_ULPI); @@ -173,6 +178,9 @@ int mpc831x_usb_cfg(void) !strcmp(prop, "utmi"))) { u32 refsel; + if (of_device_is_compatible(immr_node, "fsl,mpc8308-immr")) + goto out; + if (of_device_is_compatible(immr_node, "fsl,mpc8315-immr")) refsel = CONTROL_REFSEL_24MHZ; else @@ -186,9 +194,11 @@ int mpc831x_usb_cfg(void) temp = CONTROL_PHY_CLK_SEL_ULPI; #ifdef CONFIG_USB_OTG /* Set OTG_PORT */ - dr_mode = of_get_property(np, "dr_mode", NULL); - if (dr_mode && !strcmp(dr_mode, "otg")) - temp |= CONTROL_OTG_PORT; + if (!of_device_is_compatible(immr_node, "fsl,mpc8308-immr")) { + dr_mode = of_get_property(np, "dr_mode", NULL); + if (dr_mode && !strcmp(dr_mode, "otg")) + temp |= CONTROL_OTG_PORT; + } #endif /* CONFIG_USB_OTG */ out_be32(usb_regs + FSL_USB2_CONTROL_OFFS, temp); } else { @@ -196,6 +206,7 @@ int mpc831x_usb_cfg(void) ret = -EINVAL; } +out: iounmap(usb_regs); of_node_put(np); return ret; -- cgit v1.2.2 From b2e0861e51f2961954330dcafe6d148ee3ab5cff Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Fri, 3 Dec 2010 10:52:14 -0600 Subject: powerpc/85xx: fix compatible properties of the P1022DS DMA nodes used for audio In order to prevent the fsl_dma driver from claiming the DMA channels that the P1022DS audio driver needs, the compatible properties for those nodes must say "fsl,ssi-dma-channel" instead of "fsl,eloplus-dma-channel". Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/p1022ds.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/p1022ds.dts b/arch/powerpc/boot/dts/p1022ds.dts index 2bbecbb4cbf9..69422eb24d97 100644 --- a/arch/powerpc/boot/dts/p1022ds.dts +++ b/arch/powerpc/boot/dts/p1022ds.dts @@ -291,13 +291,13 @@ ranges = <0x0 0xc100 0x200>; cell-index = <1>; dma00: dma-channel@0 { - compatible = "fsl,eloplus-dma-channel"; + compatible = "fsl,ssi-dma-channel"; reg = <0x0 0x80>; cell-index = <0>; interrupts = <76 2>; }; dma01: dma-channel@80 { - compatible = "fsl,eloplus-dma-channel"; + compatible = "fsl,ssi-dma-channel"; reg = <0x80 0x80>; cell-index = <1>; interrupts = <77 2>; -- cgit v1.2.2 From b49d81ded47e9d01f7128fce50d224ccc2150960 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Thu, 14 Oct 2010 15:15:30 -0500 Subject: powerpc: fix warning when compiling immap_qe.h Fix the warnings genereted by arch/powerpc/include/asm/immap_qe.h when CONFIG_PHYS_ADDR_T_64BIT is defined: immap_qe.h: In function 'immrbar_virt_to_phys': immap_qe.h:472:8: warning: cast from pointer to integer of different size immap_qe.h:472:24: warning: cast from pointer to integer of different size immap_qe.h:473:5: warning: cast from pointer to integer of different size immap_qe.h:473:21: warning: cast from pointer to integer of different size immap_qe.h:474:36: warning: cast from pointer to integer of different size Note that the QE does not support 36-bit physical addresses, so even when CONFIG_PHYS_ADDR_T_64BIT is defined, the QE MURAM must be located below the 4GB boundary. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/include/asm/immap_qe.h | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/immap_qe.h b/arch/powerpc/include/asm/immap_qe.h index 4e10f508570a..0edb6842b13d 100644 --- a/arch/powerpc/include/asm/immap_qe.h +++ b/arch/powerpc/include/asm/immap_qe.h @@ -467,13 +467,22 @@ struct qe_immap { extern struct qe_immap __iomem *qe_immr; extern phys_addr_t get_qe_base(void); -static inline unsigned long immrbar_virt_to_phys(void *address) +/* + * Returns the offset within the QE address space of the given pointer. + * + * Note that the QE does not support 36-bit physical addresses, so if + * get_qe_base() returns a number above 4GB, the caller will probably fail. + */ +static inline phys_addr_t immrbar_virt_to_phys(void *address) { - if ( ((u32)address >= (u32)qe_immr) && - ((u32)address < ((u32)qe_immr + QE_IMMAP_SIZE)) ) - return (unsigned long)(address - (u32)qe_immr + - (u32)get_qe_base()); - return (unsigned long)virt_to_phys(address); + void *q = (void *)qe_immr; + + /* Is it a MURAM address? */ + if ((address >= q) && (address < (q + QE_IMMAP_SIZE))) + return get_qe_base() + (address - q); + + /* It's an address returned by kmalloc */ + return virt_to_phys(address); } #endif /* __KERNEL__ */ -- cgit v1.2.2 From bd1689cd7566d35520e66acace790bf7b7fdc34c Mon Sep 17 00:00:00 2001 From: Yoshii Takashi Date: Thu, 13 Jan 2011 13:17:15 +0000 Subject: ARM: mach-shmobile: fix cpu_base of gic_init() on sh73a0 The latest rmobile-latest doesn't run on ag5evm because of a small mistake on initialization. Though, I don't have any idea to write them smart. anyway, On sh73a0, GIC cpu_base is 0xf0000100 but 0xf0001000. Signed-off-by: Takashi YOSHII Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/intc-sh73a0.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c index 322d8d57cbcf..5d0e1503ece6 100644 --- a/arch/arm/mach-shmobile/intc-sh73a0.c +++ b/arch/arm/mach-shmobile/intc-sh73a0.c @@ -252,10 +252,11 @@ static irqreturn_t sh73a0_intcs_demux(int irq, void *dev_id) void __init sh73a0_init_irq(void) { - void __iomem *gic_base = __io(0xf0001000); + void __iomem *gic_dist_base = __io(0xf0001000); + void __iomem *gic_cpu_base = __io(0xf0000100); void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE); - gic_init(0, 29, gic_base, gic_base); + gic_init(0, 29, gic_dist_base, gic_cpu_base); register_intc_controller(&intcs_desc); -- cgit v1.2.2 From 6d2ae89c36e2adab5cfa69fecb11290082817ac6 Mon Sep 17 00:00:00 2001 From: Yoshii Takashi Date: Thu, 13 Jan 2011 12:58:56 +0000 Subject: ARM: mach-shmobile: ag5evm requires GPIOLIB Because ag5evm board setup code uses gpio functions, ARCH_REQUIRE_GPIOLIB should be set in Kconfig. Otherwise, the first build with defconfig fails. Signed-off-by: Takashi YOSHII Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 4d1b4c5c9389..a33c44fe1ae5 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -60,6 +60,7 @@ endchoice config MACH_AG5EVM bool "AG5EVM board" + select ARCH_REQUIRE_GPIOLIB depends on ARCH_SH73A0 config MACH_MACKEREL -- cgit v1.2.2 From 8f82f0c7029d39b499389c8e225cf147fb83abe2 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 14 Jan 2011 15:46:50 +0900 Subject: sh: Fix up breakage from asm-generic/pgtable.h changes. We require a forward declaration for mm_struct: In file included from arch/sh/include/asm/pgtable.h:163, from arch/sh/include/asm/io.h:21, from arch/sh/kernel/machvec.c:20: include/asm-generic/pgtable.h:104: error: 'struct mm_struct' declared inside parameter list include/asm-generic/pgtable.h: In function 'ptep_get_and_clear_full': include/asm-generic/pgtable.h:107: error: passing argument 1 of 'ptep_get_and_clear' from incompatible pointer type include/asm-generic/pgtable.h:70: note: expected 'struct mm_struct *' but argument is of type 'struct mm_struct *' Signed-off-by: Paul Mundt --- arch/sh/include/asm/pgtable.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/sh/include/asm/pgtable.h b/arch/sh/include/asm/pgtable.h index 083ea068e819..db85916b9e95 100644 --- a/arch/sh/include/asm/pgtable.h +++ b/arch/sh/include/asm/pgtable.h @@ -134,6 +134,7 @@ typedef pte_t *pte_addr_t; extern void pgtable_cache_init(void); struct vm_area_struct; +struct mm_struct; extern void __update_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte); -- cgit v1.2.2 From 50cfa79dcb91a7c40038b7a13b7e2242b541242f Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 14 Jan 2011 15:52:54 +0900 Subject: sh: support XZ-compressed kernel. Follow the x86 change and wire up support for the XZ decompressor. Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 1 + arch/sh/Makefile | 3 ++- arch/sh/boot/Makefile | 11 +++++++++-- arch/sh/boot/compressed/Makefile | 4 +++- arch/sh/boot/compressed/misc.c | 4 ++++ 5 files changed, 19 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index fff252209f63..8d411bdca9b1 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -15,6 +15,7 @@ config SUPERH select HAVE_KERNEL_GZIP select HAVE_KERNEL_BZIP2 select HAVE_KERNEL_LZMA + select HAVE_KERNEL_XZ select HAVE_KERNEL_LZO select HAVE_SYSCALL_TRACEPOINTS select HAVE_REGS_AND_STACK_ACCESS_API diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 9c8c6e1a2a15..e3d8170ad00b 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -200,7 +200,7 @@ endif libs-$(CONFIG_SUPERH32) := arch/sh/lib/ $(libs-y) libs-$(CONFIG_SUPERH64) := arch/sh/lib64/ $(libs-y) -BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.lzo \ +BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.xz uImage.lzo \ uImage.srec uImage.bin zImage vmlinux.bin vmlinux.srec \ romImage PHONY += $(BOOT_TARGETS) @@ -230,5 +230,6 @@ define archhelp @echo '* uImage.gz - Kernel-only image for U-Boot (gzip)' @echo ' uImage.bz2 - Kernel-only image for U-Boot (bzip2)' @echo ' uImage.lzma - Kernel-only image for U-Boot (lzma)' + @echo ' uImage.xz - Kernel-only image for U-Boot (xz)' @echo ' uImage.lzo - Kernel-only image for U-Boot (lzo)' endef diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile index 1ce63624c9b9..ba515d800245 100644 --- a/arch/sh/boot/Makefile +++ b/arch/sh/boot/Makefile @@ -24,12 +24,13 @@ suffix-y := bin suffix-$(CONFIG_KERNEL_GZIP) := gz suffix-$(CONFIG_KERNEL_BZIP2) := bz2 suffix-$(CONFIG_KERNEL_LZMA) := lzma +suffix-$(CONFIG_KERNEL_XZ) := xz suffix-$(CONFIG_KERNEL_LZO) := lzo targets := zImage vmlinux.srec romImage uImage uImage.srec uImage.gz \ - uImage.bz2 uImage.lzma uImage.lzo uImage.bin + uImage.bz2 uImage.lzma uImage.xz uImage.lzo uImage.bin extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma \ - vmlinux.bin.lzo + vmlinux.bin.xz vmlinux.bin.lzo subdir- := compressed romimage $(obj)/zImage: $(obj)/compressed/vmlinux FORCE @@ -76,6 +77,9 @@ $(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE $(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE $(call if_changed,lzma) +$(obj)/vmlinux.bin.xz: $(obj)/vmlinux.bin FORCE + $(call if_changed,xzkern) + $(obj)/vmlinux.bin.lzo: $(obj)/vmlinux.bin FORCE $(call if_changed,lzo) @@ -88,6 +92,9 @@ $(obj)/uImage.gz: $(obj)/vmlinux.bin.gz $(obj)/uImage.lzma: $(obj)/vmlinux.bin.lzma $(call if_changed,uimage,lzma) +$(obj)/uImage.xz: $(obj)/vmlinux.bin.xz + $(call if_changed,uimage,xz) + $(obj)/uImage.lzo: $(obj)/vmlinux.bin.lzo $(call if_changed,uimage,lzo) diff --git a/arch/sh/boot/compressed/Makefile b/arch/sh/boot/compressed/Makefile index cfa5a087a886..e0b0293bae63 100644 --- a/arch/sh/boot/compressed/Makefile +++ b/arch/sh/boot/compressed/Makefile @@ -6,7 +6,7 @@ targets := vmlinux vmlinux.bin vmlinux.bin.gz \ vmlinux.bin.bz2 vmlinux.bin.lzma \ - vmlinux.bin.lzo \ + vmlinux.bin.xz vmlinux.bin.lzo \ head_$(BITS).o misc.o piggy.o OBJECTS = $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/cache.o @@ -50,6 +50,8 @@ $(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y) FORCE $(call if_changed,bzip2) $(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y) FORCE $(call if_changed,lzma) +$(obj)/vmlinux.bin.xz: $(vmlinux.bin.all-y) FORCE + $(call if_changed,xzkern) $(obj)/vmlinux.bin.lzo: $(vmlinux.bin.all-y) FORCE $(call if_changed,lzo) diff --git a/arch/sh/boot/compressed/misc.c b/arch/sh/boot/compressed/misc.c index 27140a6b365d..95470a472d2c 100644 --- a/arch/sh/boot/compressed/misc.c +++ b/arch/sh/boot/compressed/misc.c @@ -61,6 +61,10 @@ static unsigned long free_mem_end_ptr; #include "../../../../lib/decompress_unlzma.c" #endif +#ifdef CONFIG_KERNEL_XZ +#include "../../../../lib/decompress_unxz.c" +#endif + #ifdef CONFIG_KERNEL_LZO #include "../../../../lib/decompress_unlzo.c" #endif -- cgit v1.2.2 From ff9531ec1caf0e062da132933e33878f94449274 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 11 Jan 2011 05:11:20 +0000 Subject: ARM: mach-shmobile: clock-sh7372: fixup pllc2 set_rate This patch fixup 421b446abeec55bed1251fab80cb5c12be58b773 - Care clk->rate - Don't over write PLLC2 enable bit Signed-off-by: Kuninori Morimoto Reported-by: Guennadi Liakhovetski Tested-by: Guennadi Liakhovetski Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/clock-sh7372.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index 9aa8d68d1a9c..e9731b5a73ed 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -234,7 +234,9 @@ static int pllc2_set_rate(struct clk *clk, unsigned long rate) value = __raw_readl(PLLC2CR) & ~(0x3f << 24); - __raw_writel((value & ~0x80000000) | ((idx + 19) << 24), PLLC2CR); + __raw_writel(value | ((idx + 19) << 24), PLLC2CR); + + clk->rate = clk->freq_table[idx].frequency; return 0; } -- cgit v1.2.2 From a33bb8a2cf7a686564df170dd94b1daa766c58bd Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Fri, 14 Jan 2011 11:00:41 +0000 Subject: ARM: mach-shmobile: ag5evm: Add IrDA support Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-ag5evm.c | 26 ++++++++++++++++++++++++++ arch/arm/mach-shmobile/clock-sh73a0.c | 4 +++- 2 files changed, 29 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index c18a740a4159..fb94162382e2 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -183,11 +183,32 @@ static struct platform_device mmc_device = { .resource = sh_mmcif_resources, }; +/* IrDA */ +static struct resource irda_resources[] = { + [0] = { + .start = 0xE6D00000, + .end = 0xE6D01FD4 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gic_spi(95), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device irda_device = { + .name = "sh_irda", + .id = 0, + .resource = irda_resources, + .num_resources = ARRAY_SIZE(irda_resources), +}; + static struct platform_device *ag5evm_devices[] __initdata = { ð_device, &keysc_device, &fsi_device, &mmc_device, + &irda_device, }; static struct map_desc ag5evm_io_desc[] __initdata = { @@ -287,6 +308,11 @@ static void __init ag5evm_init(void) gpio_request(GPIO_FN_FSIAISLD, NULL); gpio_request(GPIO_FN_FSIAOSLD, NULL); + /* IrDA */ + gpio_request(GPIO_FN_PORT241_IRDA_OUT, NULL); + gpio_request(GPIO_FN_PORT242_IRDA_IN, NULL); + gpio_request(GPIO_FN_PORT243_IRDA_FIRSEL, NULL); + #ifdef CONFIG_CACHE_L2X0 /* Shared attribute override enable, 64K*8way */ l2x0_init(__io(0xf0100000), 0x00460000, 0xc2000fff); diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index 720a71433be6..aa1c51dc6d77 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -258,7 +258,7 @@ enum { MSTP001, MSTP125, MSTP116, MSTP219, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, - MSTP331, MSTP329, MSTP323, MSTP312, + MSTP331, MSTP329, MSTP325, MSTP323, MSTP312, MSTP411, MSTP410, MSTP403, MSTP_NR }; @@ -279,6 +279,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */ [MSTP331] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 31, 0), /* SCIFA6 */ [MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */ + [MSTP325] = MSTP(&div4_clks[DIV6_SUB], SMSTPCR3, 25, 0), /* IrDA */ [MSTP323] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 23, 0), /* IIC1 */ [MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */ [MSTP411] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 11, 0), /* IIC3 */ @@ -308,6 +309,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */ CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP331]), /* SCIFA6 */ CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */ + CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */ CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* I2C1 */ CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */ CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* I2C3 */ -- cgit v1.2.2 From a2bc19e5866501751efeab0130fb50707f184112 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 18 Jan 2011 03:13:44 +0000 Subject: ARM: mach-shmobile: sh7372 INTCS MFIS2 interrupt update Enable the MFIS2 interrupt source in the INTCS interrupt controller included in the sh7372 processor. The priority field is constantly enabled to let the interrupt through to both the ARM side and the SH side. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/intc-sh7372.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c index f78a1ead71a5..ca5f9d17b39a 100644 --- a/arch/arm/mach-shmobile/intc-sh7372.c +++ b/arch/arm/mach-shmobile/intc-sh7372.c @@ -365,6 +365,7 @@ static struct intc_desc intca_desc __initdata = { enum { UNUSED_INTCS = 0, + ENABLED_INTCS, INTCS, @@ -413,7 +414,7 @@ enum { CMT4, DSITX1_DSITX1_0, DSITX1_DSITX1_1, - /* MFIS2 */ + MFIS2_INTCS, /* Priority always enabled using ENABLED_INTCS */ CPORTS2R, /* CEC */ JPU6E, @@ -477,7 +478,7 @@ static struct intc_vect intcs_vectors[] = { INTCS_VECT(CMT4, 0x1980), INTCS_VECT(DSITX1_DSITX1_0, 0x19a0), INTCS_VECT(DSITX1_DSITX1_1, 0x19c0), - /* MFIS2 */ + INTCS_VECT(MFIS2_INTCS, 0x1a00), INTCS_VECT(CPORTS2R, 0x1a20), /* CEC */ INTCS_VECT(JPU6E, 0x1a80), @@ -543,7 +544,7 @@ static struct intc_mask_reg intcs_mask_registers[] = { { 0, TMU1_TUNI2, TMU1_TUNI1, TMU1_TUNI0, CMT4, DSITX1_DSITX1_0, DSITX1_DSITX1_1, 0 } }, { 0xffd5019c, 0xffd501dc, 8, /* IMR7SA3 / IMCR7SA3 */ - { 0, CPORTS2R, 0, 0, + { MFIS2_INTCS, CPORTS2R, 0, 0, JPU6E, 0, 0, 0 } }, { 0xffd20104, 0, 16, /* INTAMASK */ { 0, 0, 0, 0, 0, 0, 0, 0, @@ -571,7 +572,8 @@ static struct intc_prio_reg intcs_prio_registers[] = { { 0xffd50030, 0, 16, 4, /* IPRMS3 */ { TMU1, 0, 0, 0 } }, { 0xffd50034, 0, 16, 4, /* IPRNS3 */ { CMT4, DSITX1_DSITX1_0, DSITX1_DSITX1_1, 0 } }, - { 0xffd50038, 0, 16, 4, /* IPROS3 */ { 0, CPORTS2R, 0, 0 } }, + { 0xffd50038, 0, 16, 4, /* IPROS3 */ { ENABLED_INTCS, CPORTS2R, + 0, 0 } }, { 0xffd5003c, 0, 16, 4, /* IPRPS3 */ { JPU6E, 0, 0, 0 } }, }; @@ -590,6 +592,7 @@ static struct resource intcs_resources[] __initdata = { static struct intc_desc intcs_desc __initdata = { .name = "sh7372-intcs", + .force_enable = ENABLED_INTCS, .resource = intcs_resources, .num_resources = ARRAY_SIZE(intcs_resources), .hw = INTC_HW_DESC(intcs_vectors, intcs_groups, intcs_mask_registers, -- cgit v1.2.2 From 39f308242edcf623690fd65c3c91e587ce402755 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 18 Jan 2011 03:41:04 +0000 Subject: ARM: mach-shmobile: remove sh7367 on-chip set_irq_type() set_irq_type() should only be used for external IRQ pins, so update the G3EVM board code to remove low level request. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-g3evm.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c index 686b304a7708..ef4613b993a2 100644 --- a/arch/arm/mach-shmobile/board-g3evm.c +++ b/arch/arm/mach-shmobile/board-g3evm.c @@ -347,7 +347,6 @@ static void __init g3evm_init(void) gpio_request(GPIO_FN_IRDA_OUT, NULL); gpio_request(GPIO_FN_IRDA_IN, NULL); gpio_request(GPIO_FN_IRDA_FIRSEL, NULL); - set_irq_type(evt2irq(0x480), IRQ_TYPE_LEVEL_LOW); sh7367_add_standard_devices(); -- cgit v1.2.2 From 92359a705c8e6e8206d044868e0f860b7e90f109 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 17 Jan 2011 08:02:53 +0000 Subject: sh: fix MSIOF0 SPI on ecovec: it conflicts with VOU MSIOF0 and VOU share pins on sh7724, make MSIOF0 available again, as long as VOU is not configured. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Paul Mundt --- arch/sh/boards/mach-ecovec24/setup.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 33b662999fc6..701667acfd89 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -1294,6 +1294,7 @@ static int __init arch_setup(void) i2c_register_board_info(1, i2c1_devices, ARRAY_SIZE(i2c1_devices)); +#if defined(CONFIG_VIDEO_SH_VOU) || defined(CONFIG_VIDEO_SH_VOU_MODULE) /* VOU */ gpio_request(GPIO_FN_DV_D15, NULL); gpio_request(GPIO_FN_DV_D14, NULL); @@ -1325,6 +1326,7 @@ static int __init arch_setup(void) /* Remove reset */ gpio_set_value(GPIO_PTG4, 1); +#endif return platform_add_devices(ecovec_devices, ARRAY_SIZE(ecovec_devices)); -- cgit v1.2.2 From dcdb318f2a60a479761d961e7d61bba452228561 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 18 Jan 2011 08:53:06 +0000 Subject: ARM: mach-shmobile: sh73a0 CPGA fix for FRQCRA M3 Fix the M3 field offset for the FRQCRA register in the sh73a0 CPGA. It should be 12, not 8. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/clock-sh73a0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index aa1c51dc6d77..af7d4c20ad7b 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -212,7 +212,7 @@ enum { DIV4_I, DIV4_ZG, DIV4_M3, DIV4_B, DIV4_M1, DIV4_M2, static struct clk div4_clks[DIV4_NR] = { [DIV4_I] = DIV4(FRQCRA, 20, 0xfff, CLK_ENABLE_ON_INIT), [DIV4_ZG] = DIV4(FRQCRA, 16, 0xbff, CLK_ENABLE_ON_INIT), - [DIV4_M3] = DIV4(FRQCRA, 8, 0xfff, CLK_ENABLE_ON_INIT), + [DIV4_M3] = DIV4(FRQCRA, 12, 0xfff, CLK_ENABLE_ON_INIT), [DIV4_B] = DIV4(FRQCRA, 8, 0xfff, CLK_ENABLE_ON_INIT), [DIV4_M1] = DIV4(FRQCRA, 4, 0xfff, 0), [DIV4_M2] = DIV4(FRQCRA, 0, 0xfff, 0), -- cgit v1.2.2 From 5a1b70a48ccfca241016762dfe04b135b8915a1b Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 18 Jan 2011 08:48:17 +0000 Subject: ARM: mach-shmobile: sh73a0 CPGA fix for IrDA MSTP Fix a typo for the sh73a0 CPGA code dealing with the IrDA hardware block on the AG5EVM board. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/clock-sh73a0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index af7d4c20ad7b..08fb878ef063 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -279,7 +279,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */ [MSTP331] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 31, 0), /* SCIFA6 */ [MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */ - [MSTP325] = MSTP(&div4_clks[DIV6_SUB], SMSTPCR3, 25, 0), /* IrDA */ + [MSTP325] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 25, 0), /* IrDA */ [MSTP323] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 23, 0), /* IIC1 */ [MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */ [MSTP411] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 11, 0), /* IIC3 */ -- cgit v1.2.2 From d8328f3b85f34c0dc5866f10bf6e7842fb511d62 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Sat, 15 Jan 2011 21:32:01 -0700 Subject: OMAP: counter_32k: init clocksource as part of machine timer init After commit dc548fbbd2ecd0fc3b02301d551e5f8e19ae58fd ("ARM: omap: convert sched_clock() to use new infrastructure"), OMAPs that use the 32KiHz "synchronization timer" as their clocksource crash during boot: [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz [ 0.000000] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 0.000000] pgd = c0004000 [ 0.000000] [00000000] *pgd=00000000 [ 0.000000] Internal error: Oops: 80000005 [#1] SMP [ 0.000000] last sysfs file: [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 Tainted: G W (2.6.37-07734-g2467802 #7) [ 0.000000] PC is at 0x0 [ 0.000000] LR is at sched_clock_poll+0x2c/0x3c [ 0.000000] pc : [<00000000>] lr : [] psr: 600001d3 [ 0.000000] sp : c058bfd0 ip : c058a000 fp : 00000000 [ 0.000000] r10: 00000000 r9 : 411fc092 r8 : 800330c8 [ 0.000000] r7 : c05a08e0 r6 : c0034c48 r5 : c05ffc40 r4 : c0034c4c [ 0.000000] r3 : c05ffe6c r2 : c05a0bc0 r1 : c059f098 r0 : 00000000 [ 0.000000] Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel [ 0.000000] Control: 10c53c7f Table: 8000404a DAC: 00000017 This is due to the recent ARM init_sched_clock() changes and the late initialization of the counter_32k clock source. More information here: http://marc.info/?l=linux-omap&m=129513468605208&w=2 Fix by initializing the counter_32k clocksource during the machine timer initialization. Reported-by: Russell King Tested-by: Thomas Weber Signed-off-by: Paul Walmsley --- arch/arm/mach-omap1/time.c | 7 +++++++ arch/arm/mach-omap2/timer-gp.c | 10 ++++++++-- arch/arm/plat-omap/counter_32k.c | 3 +-- arch/arm/plat-omap/include/plat/common.h | 1 + 4 files changed, 17 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index ed7a61ff916a..6ec65e599997 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -244,6 +244,13 @@ static void __init omap_timer_init(void) omap_init_mpu_timer(rate); omap_init_clocksource(rate); + /* + * XXX Since this file seems to deal mostly with the MPU timer, + * this doesn't seem like the correct place for the sync timer + * clocksource init. + */ + if (!cpu_is_omap7xx() && !cpu_is_omap15xx()) + omap_init_clocksource_32k(); } struct sys_timer omap_timer = { diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c index 4e48e786bec7..7b7c2683ae7b 100644 --- a/arch/arm/mach-omap2/timer-gp.c +++ b/arch/arm/mach-omap2/timer-gp.c @@ -42,6 +42,8 @@ #include "timer-gp.h" +#include + /* MAX_GPTIMER_ID: number of GPTIMERs on the chip */ #define MAX_GPTIMER_ID 12 @@ -176,10 +178,14 @@ static void __init omap2_gp_clockevent_init(void) /* * When 32k-timer is enabled, don't use GPTimer for clocksource * instead, just leave default clocksource which uses the 32k - * sync counter. See clocksource setup in see plat-omap/common.c. + * sync counter. See clocksource setup in plat-omap/counter_32k.c */ -static inline void __init omap2_gp_clocksource_init(void) {} +static void __init omap2_gp_clocksource_init(void) +{ + omap_init_clocksource_32k(); +} + #else /* * clocksource diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c index ea4644021fb9..0367998ff685 100644 --- a/arch/arm/plat-omap/counter_32k.c +++ b/arch/arm/plat-omap/counter_32k.c @@ -160,7 +160,7 @@ void read_persistent_clock(struct timespec *ts) *ts = *tsp; } -static int __init omap_init_clocksource_32k(void) +int __init omap_init_clocksource_32k(void) { static char err[] __initdata = KERN_ERR "%s: can't register clocksource!\n"; @@ -195,7 +195,6 @@ static int __init omap_init_clocksource_32k(void) } return 0; } -arch_initcall(omap_init_clocksource_32k); #endif /* !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX)) */ diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h index 6b8088ec74af..84c707f713b1 100644 --- a/arch/arm/plat-omap/include/plat/common.h +++ b/arch/arm/plat-omap/include/plat/common.h @@ -35,6 +35,7 @@ struct sys_timer; extern void omap_map_common_io(void); extern struct sys_timer omap_timer; +extern int __init omap_init_clocksource_32k(void); extern void omap_reserve(void); -- cgit v1.2.2 From 56bc78d414aa79bce42836df6efe9b9bef92a59d Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Mon, 17 Jan 2011 13:28:17 -0700 Subject: OMAP4: clockdomain: bypass unimplemented wake-up dependency functions on OMAP4 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 56a6a19dffda6b75cef8d4183c7c6ff650025cbd ("omap2plus: prm: Trvial build break fix for undefined reference to 'omap2_prm_read_mod_reg'") generates a lot of warnings on boot since clockdomain functions that manipulate wake-up dependencies are not implemented yet on OMAP4 for 2.6.38. This patch bypasses the OMAP2/3 functions on OMAP4, which in turn avoids the warnings when the functions would attempt to call the underlying OMAP2/3 PRCM functions. A one-line warning is still logged from the clockdomain code that the OMAP4 wake-up dependency code is not yet implemented. A clockdomain wake-up and sleep dependency implementation for OMAP4 from Rajendra should be possible to merge during the 2.6.39 merge window: http://www.mail-archive.com/linux-omap@vger.kernel.org/msg41748.html http://www.mail-archive.com/linux-omap@vger.kernel.org/msg42222.html Reported-by: Russell King Cc: Rajendra Nayak Cc: Benoît Cousson Cc: Santosh Shilimkar Acked-by: Santosh Shilimkar Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clockdomain.c | 30 ++++++++++++++++++++++++++---- 1 file changed, 26 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index e20b98636ab4..58e42f76603f 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -423,6 +423,12 @@ int clkdm_add_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) { struct clkdm_dep *cd; + if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) { + pr_err("clockdomain: %s/%s: %s: not yet implemented\n", + clkdm1->name, clkdm2->name, __func__); + return -EINVAL; + } + if (!clkdm1 || !clkdm2) return -EINVAL; @@ -458,6 +464,12 @@ int clkdm_del_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) { struct clkdm_dep *cd; + if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) { + pr_err("clockdomain: %s/%s: %s: not yet implemented\n", + clkdm1->name, clkdm2->name, __func__); + return -EINVAL; + } + if (!clkdm1 || !clkdm2) return -EINVAL; @@ -500,6 +512,12 @@ int clkdm_read_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) if (!clkdm1 || !clkdm2) return -EINVAL; + if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) { + pr_err("clockdomain: %s/%s: %s: not yet implemented\n", + clkdm1->name, clkdm2->name, __func__); + return -EINVAL; + } + cd = _clkdm_deps_lookup(clkdm2, clkdm1->wkdep_srcs); if (IS_ERR(cd)) { pr_debug("clockdomain: hardware cannot set/clear wake up of " @@ -527,6 +545,12 @@ int clkdm_clear_all_wkdeps(struct clockdomain *clkdm) struct clkdm_dep *cd; u32 mask = 0; + if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) { + pr_err("clockdomain: %s: %s: not yet implemented\n", + clkdm->name, __func__); + return -EINVAL; + } + if (!clkdm) return -EINVAL; @@ -830,8 +854,7 @@ void omap2_clkdm_allow_idle(struct clockdomain *clkdm) * dependency code and data for OMAP4. */ if (cpu_is_omap44xx()) { - WARN_ONCE(1, "clockdomain: OMAP4 wakeup/sleep dependency " - "support is not yet implemented\n"); + pr_err("clockdomain: %s: OMAP4 wakeup/sleep dependency support: not yet implemented\n", clkdm->name); } else { if (atomic_read(&clkdm->usecount) > 0) _clkdm_add_autodeps(clkdm); @@ -872,8 +895,7 @@ void omap2_clkdm_deny_idle(struct clockdomain *clkdm) * dependency code and data for OMAP4. */ if (cpu_is_omap44xx()) { - WARN_ONCE(1, "clockdomain: OMAP4 wakeup/sleep dependency " - "support is not yet implemented\n"); + pr_err("clockdomain: %s: OMAP4 wakeup/sleep dependency support: not yet implemented\n", clkdm->name); } else { if (atomic_read(&clkdm->usecount) > 0) _clkdm_del_autodeps(clkdm); -- cgit v1.2.2 From bc9fcaf3697bb4f4a7cda14d31ea4c647a6b9030 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Mon, 17 Jan 2011 13:28:16 -0700 Subject: OMAP: PRCM: remove duplicated headers A few headers are included twice, remove them. Found the following errors using make includecheck: arch/arm/mach-omap2/clock44xx_data.c: prm44xx.h is included more than once. arch/arm/mach-omap2/clockdomains44xx_data.c: cm1_44xx.h is included more than once. arch/arm/mach-omap2/clockdomains44xx_data.c: cm2_44xx.h is included more than once. arch/arm/mach-omap2/powerdomain2xxx_3xxx.c: prm-regbits-34xx.h is included more than once. Cc: Paul Walmsley Cc: Tony Lindgren Cc: Russell King Signed-off-by: Felipe Balbi [paul@pwsan.com: dropped lists from patch cc:s; tweaked subject line] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clock44xx_data.c | 1 - arch/arm/mach-omap2/clockdomains44xx_data.c | 2 -- arch/arm/mach-omap2/powerdomain2xxx_3xxx.c | 1 - 3 files changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index e8cb32fd7f13..de9ec8ddd2ae 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -34,7 +34,6 @@ #include "cm2_44xx.h" #include "cm-regbits-44xx.h" #include "prm44xx.h" -#include "prm44xx.h" #include "prm-regbits-44xx.h" #include "control.h" #include "scrm44xx.h" diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c index 51920fc7fc52..10622c914abc 100644 --- a/arch/arm/mach-omap2/clockdomains44xx_data.c +++ b/arch/arm/mach-omap2/clockdomains44xx_data.c @@ -30,8 +30,6 @@ #include "cm1_44xx.h" #include "cm2_44xx.h" -#include "cm1_44xx.h" -#include "cm2_44xx.h" #include "cm-regbits-44xx.h" #include "prm44xx.h" #include "prcm44xx.h" diff --git a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c index d5233890370c..cf600e22bf8e 100644 --- a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c +++ b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c @@ -19,7 +19,6 @@ #include #include "powerdomain.h" -#include "prm-regbits-34xx.h" #include "prm.h" #include "prm-regbits-24xx.h" #include "prm-regbits-34xx.h" -- cgit v1.2.2 From f376ea1780085196fcfff6bc27e8f6ddb324ae57 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 18 Jan 2011 13:25:39 -0800 Subject: omap1: Fix sched_clock for the MPU timer Otherwise systems using the MPU timer will hang. Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/time.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index 6ec65e599997..a39a15e4f3f9 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -44,11 +44,14 @@ #include #include #include +#include #include #include #include #include +#include + #include #include @@ -67,7 +70,7 @@ typedef struct { ((volatile omap_mpu_timer_regs_t*)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE + \ (n)*OMAP_MPU_TIMER_OFFSET)) -static inline unsigned long omap_mpu_timer_read(int nr) +static inline unsigned long notrace omap_mpu_timer_read(int nr) { volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr); return timer->read_tim; @@ -212,6 +215,14 @@ static struct clocksource clocksource_mpu = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; +static DEFINE_CLOCK_DATA(cd); + +static void notrace mpu_update_sched_clock(void) +{ + u32 cyc = mpu_read(&clocksource_mpu); + update_sched_clock(&cd, cyc, (u32)~0); +} + static void __init omap_init_clocksource(unsigned long rate) { static char err[] __initdata = KERN_ERR @@ -219,6 +230,7 @@ static void __init omap_init_clocksource(unsigned long rate) setup_irq(INT_TIMER2, &omap_mpu_timer2_irq); omap_mpu_timer_start(1, ~0, 1); + init_sched_clock(&cd, mpu_update_sched_clock, 32, rate); if (clocksource_register_hz(&clocksource_mpu, rate)) printk(err, clocksource_mpu.name); -- cgit v1.2.2 From 2150dace47258722c67f297509bc6171e7b486ad Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Fri, 7 Jan 2011 22:26:15 +0000 Subject: ARM: mach-shmobile: mackerel: clarify shdi/mmcif switch settings * Pins 2 and 4 of switch 33 are documented as don't care on the PCB, my testing seems to confirm this. * I have been unable to do anything sensible with S1 set to on. Am I missing something with regards to MMC1? * Clarify which driver is needed for each switch setting. * Should the AP4 board code be updated to allow the SHDI driver to access SHDI1 as the mackerel code does? Signed-off-by: Simon Horman Acked-by: Yusuke Goda Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-mackerel.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 7b15d21f0f68..fb4213a4e15a 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -169,9 +169,8 @@ * SW1 | SW33 * | bit1 | bit2 | bit3 | bit4 * -------------+------+------+------+------- - * MMC0 OFF | OFF | ON | ON | X - * MMC1 ON | OFF | ON | X | ON - * SDHI1 OFF | ON | X | OFF | ON + * MMC0 OFF | OFF | X | ON | X (Use MMCIF) + * SDHI1 OFF | ON | X | OFF | X (Use MFD_SH_MOBILE_SDHI) * */ -- cgit v1.2.2 From 24ee7d79c5885275a531431c3b687b3a7919eee4 Mon Sep 17 00:00:00 2001 From: Aurelien Jarno Date: Tue, 18 Jan 2011 20:55:34 +0000 Subject: sh: Fix sh build failure when CONFIG_SFC=m CONFIG_SFC=m uses topology_core_cpumask() which, for sh, expects cpu_core_map to be exported. It is not. This patch exports the needed symbol. Signed-off-by: Aurelien Jarno Signed-off-by: Paul Mundt --- arch/sh/kernel/topology.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/sh/kernel/topology.c b/arch/sh/kernel/topology.c index 948fdb656933..38e862852dd0 100644 --- a/arch/sh/kernel/topology.c +++ b/arch/sh/kernel/topology.c @@ -17,6 +17,7 @@ static DEFINE_PER_CPU(struct cpu, cpu_devices); cpumask_t cpu_core_map[NR_CPUS]; +EXPORT_SYMBOL(cpu_core_map); static cpumask_t cpu_coregroup_map(unsigned int cpu) { -- cgit v1.2.2 From 6b35eb9ddcddde7b510726de03fae071178f1ec4 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 19 Jan 2011 10:09:42 +0100 Subject: Revert "x86: Make relocatable kernel work with new binutils" This reverts commit 86b1e8dd83cb ("x86: Make relocatable kernel work with new binutils"). Markus Trippelsdorf reported a boot failure caused by this patch. The real solution to the original patch will likely involve an arch-generic solution to define an overlaid jiffies_64 and jiffies variables. Until that's done and tested on all architectures revert this commit to solve the regression. Reported-and-bisected-by: Markus Trippelsdorf Acked-by: "H. Peter Anvin" Cc: Shaohua Li Cc: "Lu, Hongjiu" Cc: Linus Torvalds , Cc: Sam Ravnborg LKML-Reference: <4D36A759.60704@intel.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/vmlinux.lds.S | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S index b34ab80fddd5..bf4700755184 100644 --- a/arch/x86/kernel/vmlinux.lds.S +++ b/arch/x86/kernel/vmlinux.lds.S @@ -34,9 +34,11 @@ OUTPUT_FORMAT(CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT) #ifdef CONFIG_X86_32 OUTPUT_ARCH(i386) ENTRY(phys_startup_32) +jiffies = jiffies_64; #else OUTPUT_ARCH(i386:x86-64) ENTRY(phys_startup_64) +jiffies_64 = jiffies; #endif #if defined(CONFIG_X86_64) && defined(CONFIG_DEBUG_RODATA) @@ -140,15 +142,6 @@ SECTIONS CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES) DATA_DATA - /* - * Workaround a binutils (2.20.51.0.12 to 2.21.51.0.3) bug. - * This makes jiffies relocatable in such binutils - */ -#ifdef CONFIG_X86_32 - jiffies = jiffies_64; -#else - jiffies_64 = jiffies; -#endif CONSTRUCTORS /* rarely changed data like cpu maps */ -- cgit v1.2.2 From 9032160275ba018003ff390835ff8ed2b5b788b8 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 19 Jan 2011 08:57:21 +0000 Subject: x86: Unify "numa=" command line option handling In order to be able to suppress the use of SRAT tables that 32-bit Linux can't deal with (in one case known to lead to a non-bootable system, unless disabling ACPI altogether), move the "numa=" option handling to common code. Signed-off-by: Jan Beulich Reviewed-by: Thomas Renninger Cc: Tejun Heo Cc: Thomas Renninger LKML-Reference: <4D36B581020000780002D0FF@vpn.id2.novell.com> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/numa_32.h | 2 ++ arch/x86/include/asm/numa_64.h | 1 + arch/x86/mm/numa.c | 22 ++++++++++++++++++++++ arch/x86/mm/numa_64.c | 24 +++++------------------- arch/x86/mm/srat_32.c | 1 - 5 files changed, 30 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/numa_32.h b/arch/x86/include/asm/numa_32.h index a37229011b56..b0ef2b449a9d 100644 --- a/arch/x86/include/asm/numa_32.h +++ b/arch/x86/include/asm/numa_32.h @@ -1,6 +1,8 @@ #ifndef _ASM_X86_NUMA_32_H #define _ASM_X86_NUMA_32_H +extern int numa_off; + extern int pxm_to_nid(int pxm); extern void numa_remove_cpu(int cpu); diff --git a/arch/x86/include/asm/numa_64.h b/arch/x86/include/asm/numa_64.h index 5ae87285a502..0493be39607c 100644 --- a/arch/x86/include/asm/numa_64.h +++ b/arch/x86/include/asm/numa_64.h @@ -40,6 +40,7 @@ extern void __cpuinit numa_remove_cpu(int cpu); #ifdef CONFIG_NUMA_EMU #define FAKE_NODE_MIN_SIZE ((u64)32 << 20) #define FAKE_NODE_MIN_HASH_MASK (~(FAKE_NODE_MIN_SIZE - 1UL)) +void numa_emu_cmdline(char *); #endif /* CONFIG_NUMA_EMU */ #else static inline void init_cpu_to_node(void) { } diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c index 787c52ca49c3..ebf6d7887a38 100644 --- a/arch/x86/mm/numa.c +++ b/arch/x86/mm/numa.c @@ -2,6 +2,28 @@ #include #include #include +#include +#include + +int __initdata numa_off; + +static __init int numa_setup(char *opt) +{ + if (!opt) + return -EINVAL; + if (!strncmp(opt, "off", 3)) + numa_off = 1; +#ifdef CONFIG_NUMA_EMU + if (!strncmp(opt, "fake=", 5)) + numa_emu_cmdline(opt + 5); +#endif +#ifdef CONFIG_ACPI_NUMA + if (!strncmp(opt, "noacpi", 6)) + acpi_numa = -1; +#endif + return 0; +} +early_param("numa", numa_setup); /* * Which logical CPUs are on which nodes diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index 1e72102e80c9..95ea1551eebc 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -30,7 +30,6 @@ s16 apicid_to_node[MAX_LOCAL_APIC] __cpuinitdata = { [0 ... MAX_LOCAL_APIC-1] = NUMA_NO_NODE }; -int numa_off __initdata; static unsigned long __initdata nodemap_addr; static unsigned long __initdata nodemap_size; @@ -263,6 +262,11 @@ static struct bootnode nodes[MAX_NUMNODES] __initdata; static struct bootnode physnodes[MAX_NUMNODES] __cpuinitdata; static char *cmdline __initdata; +void __init numa_emu_cmdline(char *str) +{ + cmdline = str; +} + static int __init setup_physnodes(unsigned long start, unsigned long end, int acpi, int amd) { @@ -670,24 +674,6 @@ unsigned long __init numa_free_all_bootmem(void) return pages; } -static __init int numa_setup(char *opt) -{ - if (!opt) - return -EINVAL; - if (!strncmp(opt, "off", 3)) - numa_off = 1; -#ifdef CONFIG_NUMA_EMU - if (!strncmp(opt, "fake=", 5)) - cmdline = opt + 5; -#endif -#ifdef CONFIG_ACPI_NUMA - if (!strncmp(opt, "noacpi", 6)) - acpi_numa = -1; -#endif - return 0; -} -early_param("numa", numa_setup); - #ifdef CONFIG_NUMA static __init int find_near_online_node(int node) diff --git a/arch/x86/mm/srat_32.c b/arch/x86/mm/srat_32.c index f16434568a51..ae96e7b8051d 100644 --- a/arch/x86/mm/srat_32.c +++ b/arch/x86/mm/srat_32.c @@ -59,7 +59,6 @@ static struct node_memory_chunk_s __initdata node_memory_chunk[MAXCHUNKS]; static int __initdata num_memory_chunks; /* total number of memory chunks */ static u8 __initdata apicid_to_pxm[MAX_APICID]; -int numa_off __initdata; int acpi_numa __initdata; static __init void bad_srat(void) -- cgit v1.2.2 From 5d1034f01b3616d6636ab7851ad9e63d42abbbd6 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Wed, 19 Jan 2011 08:59:33 -0700 Subject: powerpc/83xx: fix build failures on dt compatible list. Commit a4f740cf, "of/flattree: Add of_flat_dt_match() helper function" introduced build failures in arch/powerpc/platform/83xx by mistyping 'static' as 'struct' in the compatible string list, and omitting a few semicolons. This patch fixes it. Reported-by: Stephen Rothwell Signed-off-by: Grant Likely --- arch/powerpc/platforms/83xx/mpc830x_rdb.c | 4 ++-- arch/powerpc/platforms/83xx/mpc831x_rdb.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/83xx/mpc830x_rdb.c b/arch/powerpc/platforms/83xx/mpc830x_rdb.c index 661d354e4ff2..d0c4e15b7794 100644 --- a/arch/powerpc/platforms/83xx/mpc830x_rdb.c +++ b/arch/powerpc/platforms/83xx/mpc830x_rdb.c @@ -57,12 +57,12 @@ static void __init mpc830x_rdb_init_IRQ(void) ipic_set_default_priority(); } -struct const char *board[] __initdata = { +static const char *board[] __initdata = { "MPC8308RDB", "fsl,mpc8308rdb", "denx,mpc8308_p1m", NULL -} +}; /* * Called very early, MMU is off, device-tree isn't unflattened diff --git a/arch/powerpc/platforms/83xx/mpc831x_rdb.c b/arch/powerpc/platforms/83xx/mpc831x_rdb.c index b54cd736a895..f859ead49a8d 100644 --- a/arch/powerpc/platforms/83xx/mpc831x_rdb.c +++ b/arch/powerpc/platforms/83xx/mpc831x_rdb.c @@ -60,11 +60,11 @@ static void __init mpc831x_rdb_init_IRQ(void) ipic_set_default_priority(); } -struct const char *board[] __initdata = { +static const char *board[] __initdata = { "MPC8313ERDB", "fsl,mpc8315erdb", NULL -} +}; /* * Called very early, MMU is off, device-tree isn't unflattened -- cgit v1.2.2 From 05b5ca9b100300c8b98429962071aa66c5d2460e Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 18 Jan 2011 12:42:23 -0800 Subject: omap1: Fix booting for 15xx and 730 with omap1_defconfig For omap15xx and 730 we need to use the MPU timer as the 32K timer is not available. For omap16xx we want to use the 32K timer because of PM. Fix this by allowing to build in both timers. Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/Kconfig | 2 ++ arch/arm/mach-omap1/Makefile | 3 +- arch/arm/mach-omap1/time.c | 48 +++++++++++++++++++++++--------- arch/arm/mach-omap1/timer32k.c | 13 ++++----- arch/arm/plat-omap/Kconfig | 8 ++---- arch/arm/plat-omap/counter_32k.c | 5 ---- arch/arm/plat-omap/include/plat/common.h | 1 + 7 files changed, 47 insertions(+), 33 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 8d2f2daba0c0..e0a028161dde 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -9,6 +9,7 @@ config ARCH_OMAP730 depends on ARCH_OMAP1 bool "OMAP730 Based System" select CPU_ARM926T + select OMAP_MPU_TIMER select ARCH_OMAP_OTG config ARCH_OMAP850 @@ -22,6 +23,7 @@ config ARCH_OMAP15XX default y bool "OMAP15xx Based System" select CPU_ARM925T + select OMAP_MPU_TIMER config ARCH_OMAP16XX depends on ARCH_OMAP1 diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 6ee19504845f..ba6009f27677 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -3,12 +3,11 @@ # # Common support -obj-y := io.o id.o sram.o irq.o mux.o flash.o serial.o devices.o dma.o +obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o obj-y += clock.o clock_data.o opp_data.o obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o -obj-$(CONFIG_OMAP_MPU_TIMER) += time.o obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o # Power Management diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index a39a15e4f3f9..b03f34d55d88 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -57,6 +57,8 @@ #include +#ifdef CONFIG_OMAP_MPU_TIMER + #define OMAP_MPU_TIMER_BASE OMAP_MPU_TIMER1_BASE #define OMAP_MPU_TIMER_OFFSET 0x100 @@ -236,12 +238,7 @@ static void __init omap_init_clocksource(unsigned long rate) printk(err, clocksource_mpu.name); } -/* - * --------------------------------------------------------------------------- - * Timer initialization - * --------------------------------------------------------------------------- - */ -static void __init omap_timer_init(void) +static void __init omap_mpu_timer_init(void) { struct clk *ck_ref = clk_get(NULL, "ck_ref"); unsigned long rate; @@ -256,13 +253,38 @@ static void __init omap_timer_init(void) omap_init_mpu_timer(rate); omap_init_clocksource(rate); - /* - * XXX Since this file seems to deal mostly with the MPU timer, - * this doesn't seem like the correct place for the sync timer - * clocksource init. - */ - if (!cpu_is_omap7xx() && !cpu_is_omap15xx()) - omap_init_clocksource_32k(); +} + +#else +static inline void omap_mpu_timer_init(void) +{ + pr_err("Bogus timer, should not happen\n"); +} +#endif /* CONFIG_OMAP_MPU_TIMER */ + +static inline int omap_32k_timer_usable(void) +{ + int res = false; + + if (cpu_is_omap730() || cpu_is_omap15xx()) + return res; + +#ifdef CONFIG_OMAP_32K_TIMER + res = omap_32k_timer_init(); +#endif + + return res; +} + +/* + * --------------------------------------------------------------------------- + * Timer initialization + * --------------------------------------------------------------------------- + */ +static void __init omap_timer_init(void) +{ + if (!omap_32k_timer_usable()) + omap_mpu_timer_init(); } struct sys_timer omap_timer = { diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c index 20cfbcc6c60c..13d7b8f145bd 100644 --- a/arch/arm/mach-omap1/timer32k.c +++ b/arch/arm/mach-omap1/timer32k.c @@ -52,10 +52,9 @@ #include #include #include +#include #include -struct sys_timer omap_timer; - /* * --------------------------------------------------------------------------- * 32KHz OS timer @@ -181,14 +180,14 @@ static __init void omap_init_32k_timer(void) * Timer initialization * --------------------------------------------------------------------------- */ -static void __init omap_timer_init(void) +bool __init omap_32k_timer_init(void) { + omap_init_clocksource_32k(); + #ifdef CONFIG_OMAP_DM_TIMER omap_dm_timer_init(); #endif omap_init_32k_timer(); -} -struct sys_timer omap_timer = { - .init = omap_timer_init, -}; + return true; +} diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index 18fe3cb195dc..b6333ae3f92a 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -144,12 +144,9 @@ config OMAP_IOMMU_DEBUG config OMAP_IOMMU_IVA2 bool -choice - prompt "System timer" - default OMAP_32K_TIMER if !ARCH_OMAP15XX - config OMAP_MPU_TIMER bool "Use mpu timer" + depends on ARCH_OMAP1 help Select this option if you want to use the OMAP mpu timer. This timer provides more intra-tick resolution than the 32KHz timer, @@ -158,6 +155,7 @@ config OMAP_MPU_TIMER config OMAP_32K_TIMER bool "Use 32KHz timer" depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS + default y if (ARCH_OMAP16XX || ARCH_OMAP2PLUS) help Select this option if you want to enable the OMAP 32KHz timer. This timer saves power compared to the OMAP_MPU_TIMER, and has @@ -165,8 +163,6 @@ config OMAP_32K_TIMER intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is currently only available for OMAP16XX, 24XX, 34XX and OMAP4. -endchoice - config OMAP3_L2_AUX_SECURE_SAVE_RESTORE bool "OMAP3 HS/EMU save and restore for L2 AUX control register" depends on ARCH_OMAP3 && PM diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c index 0367998ff685..5d7b08b5a13a 100644 --- a/arch/arm/plat-omap/counter_32k.c +++ b/arch/arm/plat-omap/counter_32k.c @@ -36,8 +36,6 @@ #define OMAP16XX_TIMER_32K_SYNCHRONIZED 0xfffbc410 -#if !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX)) - #include /* @@ -195,6 +193,3 @@ int __init omap_init_clocksource_32k(void) } return 0; } - -#endif /* !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX)) */ - diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h index 84c707f713b1..ef683e01701b 100644 --- a/arch/arm/plat-omap/include/plat/common.h +++ b/arch/arm/plat-omap/include/plat/common.h @@ -35,6 +35,7 @@ struct sys_timer; extern void omap_map_common_io(void); extern struct sys_timer omap_timer; +extern bool omap_32k_timer_init(void); extern int __init omap_init_clocksource_32k(void); extern void omap_reserve(void); -- cgit v1.2.2 From 4912cf04b202a9d0bdc4082ecb9247943584450d Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 18 Jan 2011 17:00:00 -0800 Subject: omap1: Fix sched_clock implementation when both MPU timer and 32K timer are used Earlier patches select HAVE_SCHED_CLOCK for omaps. To have working sched_clock also for MPU timer, we need to implement it in a way where the right one gets selected during the runtime. Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/time.c | 48 +++++++++++++++++++++++++++++++- arch/arm/plat-omap/counter_32k.c | 14 +++++++++- arch/arm/plat-omap/include/plat/common.h | 1 + 3 files changed, 61 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index b03f34d55d88..f83fc335c613 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -219,6 +219,24 @@ static struct clocksource clocksource_mpu = { static DEFINE_CLOCK_DATA(cd); +static inline unsigned long long notrace _omap_mpu_sched_clock(void) +{ + u32 cyc = mpu_read(&clocksource_mpu); + return cyc_to_sched_clock(&cd, cyc, (u32)~0); +} + +#ifndef CONFIG_OMAP_32K_TIMER +unsigned long long notrace sched_clock(void) +{ + return _omap_mpu_sched_clock(); +} +#else +static unsigned long long notrace omap_mpu_sched_clock(void) +{ + return _omap_mpu_sched_clock(); +} +#endif + static void notrace mpu_update_sched_clock(void) { u32 cyc = mpu_read(&clocksource_mpu); @@ -262,6 +280,30 @@ static inline void omap_mpu_timer_init(void) } #endif /* CONFIG_OMAP_MPU_TIMER */ +#if defined(CONFIG_OMAP_MPU_TIMER) && defined(CONFIG_OMAP_32K_TIMER) +static unsigned long long (*preferred_sched_clock)(void); + +unsigned long long notrace sched_clock(void) +{ + if (!preferred_sched_clock) + return 0; + + return preferred_sched_clock(); +} + +static inline void preferred_sched_clock_init(bool use_32k_sched_clock) +{ + if (use_32k_sched_clock) + preferred_sched_clock = omap_32k_sched_clock; + else + preferred_sched_clock = omap_mpu_sched_clock; +} +#else +static inline void preferred_sched_clock_init(bool use_32k_sched_clcok) +{ +} +#endif + static inline int omap_32k_timer_usable(void) { int res = false; @@ -283,8 +325,12 @@ static inline int omap_32k_timer_usable(void) */ static void __init omap_timer_init(void) { - if (!omap_32k_timer_usable()) + if (omap_32k_timer_usable()) { + preferred_sched_clock_init(1); + } else { omap_mpu_timer_init(); + preferred_sched_clock_init(0); + } } struct sys_timer omap_timer = { diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c index 5d7b08b5a13a..862dda95d61d 100644 --- a/arch/arm/plat-omap/counter_32k.c +++ b/arch/arm/plat-omap/counter_32k.c @@ -120,12 +120,24 @@ static DEFINE_CLOCK_DATA(cd); #define SC_MULT 4000000000u #define SC_SHIFT 17 -unsigned long long notrace sched_clock(void) +static inline unsigned long long notrace _omap_32k_sched_clock(void) { u32 cyc = clocksource_32k.read(&clocksource_32k); return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0, SC_MULT, SC_SHIFT); } +#ifndef CONFIG_OMAP_MPU_TIMER +unsigned long long notrace sched_clock(void) +{ + return _omap_32k_sched_clock(); +} +#else +unsigned long long notrace omap_32k_sched_clock(void) +{ + return _omap_32k_sched_clock(); +} +#endif + static void notrace omap_update_sched_clock(void) { u32 cyc = clocksource_32k.read(&clocksource_32k); diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h index ef683e01701b..29b2afb4288f 100644 --- a/arch/arm/plat-omap/include/plat/common.h +++ b/arch/arm/plat-omap/include/plat/common.h @@ -37,6 +37,7 @@ extern void omap_map_common_io(void); extern struct sys_timer omap_timer; extern bool omap_32k_timer_init(void); extern int __init omap_init_clocksource_32k(void); +extern unsigned long long notrace omap_32k_sched_clock(void); extern void omap_reserve(void); -- cgit v1.2.2 From fec5568cbcf3b5d701d2adf9a22f0110bcc6eb33 Mon Sep 17 00:00:00 2001 From: Igor Grinberg Date: Thu, 13 Jan 2011 16:24:49 +0000 Subject: arm: omap3: cm-t3517: rtc fix Fix rtc gpios and mux Signed-off-by: Igor Grinberg Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-cm-t3517.c | 25 ++++++++++++++++++++++--- 1 file changed, 22 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index 5b0c77732dfc..1706df0c51d2 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -124,8 +124,9 @@ static inline void cm_t3517_init_hecc(void) {} #if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE) #define RTC_IO_GPIO (153) #define RTC_WR_GPIO (154) -#define RTC_RD_GPIO (160) +#define RTC_RD_GPIO (53) #define RTC_CS_GPIO (163) +#define RTC_CS_EN_GPIO (160) struct v3020_platform_data cm_t3517_v3020_pdata = { .use_gpio = 1, @@ -145,6 +146,16 @@ static struct platform_device cm_t3517_rtc_device = { static void __init cm_t3517_init_rtc(void) { + int err; + + err = gpio_request(RTC_CS_EN_GPIO, "rtc cs en"); + if (err) { + pr_err("CM-T3517: rtc cs en gpio request failed: %d\n", err); + return; + } + + gpio_direction_output(RTC_CS_EN_GPIO, 1); + platform_device_register(&cm_t3517_rtc_device); } #else @@ -256,11 +267,19 @@ static void __init cm_t3517_init_irq(void) static struct omap_board_mux board_mux[] __initdata = { /* GPIO186 - Green LED */ OMAP3_MUX(SYS_CLKOUT2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - /* RTC GPIOs: IO, WR#, RD#, CS# */ + + /* RTC GPIOs: */ + /* IO - GPIO153 */ OMAP3_MUX(MCBSP4_DR, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), + /* WR# - GPIO154 */ OMAP3_MUX(MCBSP4_DX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), - OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), + /* RD# - GPIO53 */ + OMAP3_MUX(GPMC_NCS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), + /* CS# - GPIO163 */ OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), + /* CS EN - GPIO160 */ + OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), + /* HSUSB1 RESET */ OMAP3_MUX(UART2_TX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), /* HSUSB2 RESET */ -- cgit v1.2.2 From 2216b436ed8788f1a6d51b136ed1421956aa18e0 Mon Sep 17 00:00:00 2001 From: Igor Grinberg Date: Thu, 13 Jan 2011 16:24:50 +0000 Subject: arm: omap3: cm-t3517: minor comment fix offsets in the comment were wrong - fix this. Signed-off-by: Igor Grinberg Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-cm-t3517.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index 1706df0c51d2..8f9a64d650ee 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -225,12 +225,12 @@ static struct mtd_partition cm_t3517_nand_partitions[] = { }, { .name = "linux", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ + .offset = MTDPART_OFS_APPEND, /* Offset = 0x2A0000 */ .size = 32 * NAND_BLOCK_SIZE, }, { .name = "rootfs", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */ + .offset = MTDPART_OFS_APPEND, /* Offset = 0x6A0000 */ .size = MTDPART_SIZ_FULL, }, }; -- cgit v1.2.2 From 35a78fa48678926464138aab3a4dede4503befb5 Mon Sep 17 00:00:00 2001 From: Daniel Morsing Date: Wed, 19 Jan 2011 08:19:24 +0000 Subject: OMAP3: Devkit8000: Fix tps65930 pullup/pulldown configuration gpio7 on the tps65930 is used as an output on the devkit8000 and gpio1 is not connected. Remove gpio7 and change gpio1 to pulldown Signed-off-by: Daniel Morsing Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-devkit8000.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 00bb1fc5e017..e906e05bb41b 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -275,8 +275,7 @@ static struct twl4030_gpio_platform_data devkit8000_gpio_data = { .irq_base = TWL4030_GPIO_IRQ_BASE, .irq_end = TWL4030_GPIO_IRQ_END, .use_leds = true, - .pullups = BIT(1), - .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13) + .pulldowns = BIT(1) | BIT(2) | BIT(6) | BIT(8) | BIT(13) | BIT(15) | BIT(16) | BIT(17), .setup = devkit8000_twl_gpio_setup, }; -- cgit v1.2.2 From 4fb699b408b559107f1e1b47d176d33361446b69 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Wed, 24 Nov 2010 13:23:21 +0200 Subject: omap: DMA: clear interrupt status correctly When clearing the DMA channel, clear all status bits. When handling a DMA interrupt, clear only the interrupt status bits that have been read and are passed to the channel's interrupt handler, not every status bit. Signed-off-by: Adrian Hunter Acked-by: Santosh Shilimkar Acked-by: G, Manjunath Kondaiah Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dma.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index c4b2b478b1a5..85363084cc1a 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -53,7 +53,7 @@ enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED }; #endif #define OMAP_DMA_ACTIVE 0x01 -#define OMAP2_DMA_CSR_CLEAR_MASK 0xffe +#define OMAP2_DMA_CSR_CLEAR_MASK 0xffffffff #define OMAP_FUNC_MUX_ARM_BASE (0xfffe1000 + 0xec) @@ -1873,7 +1873,7 @@ static int omap2_dma_handle_ch(int ch) printk(KERN_INFO "DMA misaligned error with device %d\n", dma_chan[ch].dev_id); - p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, ch); + p->dma_write(status, CSR, ch); p->dma_write(1 << ch, IRQSTATUS_L0, ch); /* read back the register to flush the write */ p->dma_read(IRQSTATUS_L0, ch); @@ -1893,10 +1893,9 @@ static int omap2_dma_handle_ch(int ch) OMAP_DMA_CHAIN_INCQHEAD(chain_id); status = p->dma_read(CSR, ch); + p->dma_write(status, CSR, ch); } - p->dma_write(status, CSR, ch); - if (likely(dma_chan[ch].callback != NULL)) dma_chan[ch].callback(ch, status, dma_chan[ch].data); -- cgit v1.2.2 From c9f2954964df1490373065558f3156379c7a2454 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Tue, 30 Nov 2010 13:07:21 -0600 Subject: lguest: Use this_cpu_ops Use this_cpu_ops in a couple of places in lguest. Signed-off-by: Christoph Lameter Signed-off-by: Rusty Russell --- arch/x86/lguest/boot.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index 4996cf5f73a0..2902ee234614 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -824,7 +824,7 @@ static void __init lguest_init_IRQ(void) for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) { /* Some systems map "vectors" to interrupts weirdly. Not us! */ - __get_cpu_var(vector_irq)[i] = i - FIRST_EXTERNAL_VECTOR; + __this_cpu_write(vector_irq[i]) = i - FIRST_EXTERNAL_VECTOR; if (i != SYSCALL_VECTOR) set_intr_gate(i, interrupt[i - FIRST_EXTERNAL_VECTOR]); } -- cgit v1.2.2 From ced05dd741779986861fe7369fe002f542d6fa34 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Thu, 20 Jan 2011 21:37:29 -0600 Subject: lguest: compile fixes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit arch/x86/lguest/boot.c: In function ‘lguest_init_IRQ’: arch/x86/lguest/boot.c:824: error: macro "__this_cpu_write" requires 2 arguments, but only 1 given arch/x86/lguest/boot.c:824: error: ‘__this_cpu_write’ undeclared (first use in this function) arch/x86/lguest/boot.c:824: error: (Each undeclared identifier is reported only once arch/x86/lguest/boot.c:824: error: for each function it appears in.) drivers/lguest/x86/core.c: In function ‘copy_in_guest_info’: drivers/lguest/x86/core.c:94: error: lvalue required as left operand of assignment Signed-off-by: Rusty Russell --- arch/x86/lguest/boot.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index 2902ee234614..eba687f0cc0c 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -824,7 +824,7 @@ static void __init lguest_init_IRQ(void) for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) { /* Some systems map "vectors" to interrupts weirdly. Not us! */ - __this_cpu_write(vector_irq[i]) = i - FIRST_EXTERNAL_VECTOR; + __this_cpu_write(vector_irq[i], i - FIRST_EXTERNAL_VECTOR); if (i != SYSCALL_VECTOR) set_intr_gate(i, interrupt[i - FIRST_EXTERNAL_VECTOR]); } -- cgit v1.2.2 From 2b8216e6354e7666a2718d4b891c8e8d7fcded27 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 1 Jan 2011 11:08:46 -0800 Subject: LGUEST_GUEST: fix unmet direct dependencies (VIRTUALIZATION && VIRTIO) Honor the kconfig menu hierarchy to remove kconfig dependency warnings: VIRTIO and VIRTIO_RING are subordinate to VIRTUALIZATION. warning: (LGUEST_GUEST) selects VIRTIO which has unmet direct dependencies (VIRTUALIZATION) warning: (LGUEST_GUEST && VIRTIO_PCI && VIRTIO_BALLOON) selects VIRTIO_RING which has unmet direct dependencies (VIRTUALIZATION && VIRTIO) Reported-by: Toralf F_rster Signed-off-by: Randy Dunlap Signed-off-by: Rusty Russell --- arch/x86/lguest/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/x86/lguest/Kconfig b/arch/x86/lguest/Kconfig index 38718041efc3..6e121a2a49e1 100644 --- a/arch/x86/lguest/Kconfig +++ b/arch/x86/lguest/Kconfig @@ -2,6 +2,7 @@ config LGUEST_GUEST bool "Lguest guest support" select PARAVIRT depends on X86_32 + select VIRTUALIZATION select VIRTIO select VIRTIO_RING select VIRTIO_CONSOLE -- cgit v1.2.2 From fb87ec382f9d95469df494bdee9db922594f5cd4 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Wed, 19 Jan 2011 20:20:56 -0500 Subject: x86: Update CPU cache attributes table descriptors Update to latest definitions in: http://www.intel.com/Assets/PDF/appnote/241618.pdf [ Note, this update of the doc has removed some old values which we have listed. I think until we have clarification that they were never used in production, they should be left there. ] Signed-off-by: Dave Jones Cc: Arjan van de Ven Cc: "H. Peter Anvin" LKML-Reference: <20110120012055.GA15985@redhat.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/intel_cacheinfo.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c index 7283e98deaae..ec2c19a7b8ef 100644 --- a/arch/x86/kernel/cpu/intel_cacheinfo.c +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c @@ -45,6 +45,7 @@ static const struct _cache_table __cpuinitconst cache_table[] = { 0x0a, LVL_1_DATA, 8 }, /* 2 way set assoc, 32 byte line size */ { 0x0c, LVL_1_DATA, 16 }, /* 4-way set assoc, 32 byte line size */ { 0x0d, LVL_1_DATA, 16 }, /* 4-way set assoc, 64 byte line size */ + { 0x0e, LVL_1_DATA, 24 }, /* 6-way set assoc, 64 byte line size */ { 0x21, LVL_2, 256 }, /* 8-way set assoc, 64 byte line size */ { 0x22, LVL_3, 512 }, /* 4-way set assoc, sectored cache, 64 byte line size */ { 0x23, LVL_3, MB(1) }, /* 8-way set assoc, sectored cache, 64 byte line size */ @@ -66,6 +67,7 @@ static const struct _cache_table __cpuinitconst cache_table[] = { 0x45, LVL_2, MB(2) }, /* 4-way set assoc, 32 byte line size */ { 0x46, LVL_3, MB(4) }, /* 4-way set assoc, 64 byte line size */ { 0x47, LVL_3, MB(8) }, /* 8-way set assoc, 64 byte line size */ + { 0x48, LVL_2, MB(3) }, /* 12-way set assoc, 64 byte line size */ { 0x49, LVL_3, MB(4) }, /* 16-way set assoc, 64 byte line size */ { 0x4a, LVL_3, MB(6) }, /* 12-way set assoc, 64 byte line size */ { 0x4b, LVL_3, MB(8) }, /* 16-way set assoc, 64 byte line size */ @@ -87,6 +89,7 @@ static const struct _cache_table __cpuinitconst cache_table[] = { 0x7c, LVL_2, MB(1) }, /* 8-way set assoc, sectored cache, 64 byte line size */ { 0x7d, LVL_2, MB(2) }, /* 8-way set assoc, 64 byte line size */ { 0x7f, LVL_2, 512 }, /* 2-way set assoc, 64 byte line size */ + { 0x80, LVL_2, 512 }, /* 8-way set assoc, 64 byte line size */ { 0x82, LVL_2, 256 }, /* 8-way set assoc, 32 byte line size */ { 0x83, LVL_2, 512 }, /* 8-way set assoc, 32 byte line size */ { 0x84, LVL_2, MB(1) }, /* 8-way set assoc, 32 byte line size */ -- cgit v1.2.2 From 2ce802f62ba32a7d95748ac92bf351f76affb6ff Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 20 Jan 2011 12:06:35 +0100 Subject: lockdep: Move early boot local IRQ enable/disable status to init/main.c During early boot, local IRQ is disabled until IRQ subsystem is properly initialized. During this time, no one should enable local IRQ and some operations which usually are not allowed with IRQ disabled, e.g. operations which might sleep or require communications with other processors, are allowed. lockdep tracked this with early_boot_irqs_off/on() callbacks. As other subsystems need this information too, move it to init/main.c and make it generally available. While at it, toggle the boolean to early_boot_irqs_disabled instead of enabled so that it can be initialized with %false and %true indicates the exceptional condition. Signed-off-by: Tejun Heo Acked-by: Peter Zijlstra Acked-by: Pekka Enberg Cc: Linus Torvalds LKML-Reference: <20110120110635.GB6036@htj.dyndns.org> Signed-off-by: Ingo Molnar --- arch/x86/xen/enlighten.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 7e8d3bc80af6..50542efe45fb 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1194,7 +1194,7 @@ asmlinkage void __init xen_start_kernel(void) per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0]; local_irq_disable(); - early_boot_irqs_off(); + early_boot_irqs_disabled = true; memblock_init(); -- cgit v1.2.2 From 71fc5099ed50d3699ba003042a721a0bf105369d Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 20 Jan 2011 08:11:11 +0000 Subject: ARM: mach-shmobile: sh73a0 CPGA fix for PLL CFG bit PLL1 and PLL2 in the sh73a0 CPGA has a CFG bit that must be taken into account to correctly calculate the frequency. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/clock-sh73a0.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index 08fb878ef063..bcaf58a9c153 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -118,8 +118,16 @@ static unsigned long pll_recalc(struct clk *clk) { unsigned long mult = 1; - if (__raw_readl(PLLECR) & (1 << clk->enable_bit)) + if (__raw_readl(PLLECR) & (1 << clk->enable_bit)) { mult = (((__raw_readl(clk->enable_reg) >> 24) & 0x3f) + 1); + /* handle CFG bit for PLL1 and PLL2 */ + switch (clk->enable_bit) { + case 1: + case 2: + if (__raw_readl(clk->enable_reg) & (1 << 20)) + mult *= 2; + } + } return clk->parent->rate * mult; } -- cgit v1.2.2 From 170c7ab58f41c526c54e9dd04044857d5d73f9e6 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 20 Jan 2011 08:41:03 +0000 Subject: ARM: mach-shmobile: AG5EVM LCDC / MIPI-DSI platform data Add platform data for MIPI-DSI and LCDC on the AG5EVM board. The sh73a0 clkdev bindings are also updated. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/Kconfig | 1 + arch/arm/mach-shmobile/board-ag5evm.c | 154 +++++++++++++++++++++++++++++++++- arch/arm/mach-shmobile/clock-sh73a0.c | 13 ++- 3 files changed, 165 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index a33c44fe1ae5..0c8f6cf3e948 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -61,6 +61,7 @@ endchoice config MACH_AG5EVM bool "AG5EVM board" select ARCH_REQUIRE_GPIOLIB + select SH_LCD_MIPI_DSI depends on ARCH_SH73A0 config MACH_MACKEREL diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index fb94162382e2..2123b96b5638 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -34,9 +34,10 @@ #include #include #include - +#include +#include