From 7a4a207e74d6aeb63a38e9a3f0cfc40223d5c40e Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 5 Jul 2010 13:39:16 +0000 Subject: Blackfin: BF51x/BF52x: support GPIO Hysteresis/Schmitt Trigger options Newer parts have optional Hysteresis/Schmitt Trigger options to help with dirty signals. So add some kconfig options for tuning this and enable it by default for people. Signed-off-by: Michael Hennerich Signed-off-by: Mike Frysinger --- arch/blackfin/kernel/setup.c | 7 ++ arch/blackfin/mach-bf518/Kconfig | 61 +++++++++++++ arch/blackfin/mach-bf518/include/mach/bf518.h | 105 ++++++++++++++++++++++ arch/blackfin/mach-bf527/Kconfig | 66 ++++++++++++++ arch/blackfin/mach-bf527/include/mach/bf527.h | 120 ++++++++++++++++++++++++++ 5 files changed, 359 insertions(+) (limited to 'arch') diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index d37a397f43f5..ac71dc15cbdb 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -864,6 +864,13 @@ void __init setup_arch(char **cmdline_p) bfin_write_EBIU_MODE(CONFIG_EBIU_MODEVAL); bfin_write_EBIU_FCTL(CONFIG_EBIU_FCTLVAL); #endif +#ifdef CONFIG_BFIN_HYSTERESIS_CONTROL + bfin_write_PORTF_HYSTERISIS(HYST_PORTF_0_15); + bfin_write_PORTG_HYSTERISIS(HYST_PORTG_0_15); + bfin_write_PORTH_HYSTERISIS(HYST_PORTH_0_15); + bfin_write_MISCPORT_HYSTERISIS((bfin_read_MISCPORT_HYSTERISIS() & + ~HYST_NONEGPIO_MASK) | HYST_NONEGPIO); +#endif cclk = get_cclk(); sclk = get_sclk(); diff --git a/arch/blackfin/mach-bf518/Kconfig b/arch/blackfin/mach-bf518/Kconfig index 4ab2d166c832..1d9f631a7f94 100644 --- a/arch/blackfin/mach-bf518/Kconfig +++ b/arch/blackfin/mach-bf518/Kconfig @@ -62,6 +62,67 @@ config BF518_UART1_PORTG PORT G endchoice +comment "Hysteresis/Schmitt Trigger Control" +config BFIN_HYSTERESIS_CONTROL + bool "Enable Hysteresis Control" + help + The ADSP-BF51x allows to control input hysteresis for Port F, + Port G and Port H and other processor signal inputs. + The Schmitt trigger enables can be set only for pin groups. + Saying Y will overwrite the default reset or boot loader + initialization. + +menu "PORT F" + depends on BFIN_HYSTERESIS_CONTROL +config GPIO_HYST_PORTF_0_7 + bool "Enable Hysteresis on PORTF {0...7}" +config GPIO_HYST_PORTF_8_9 + bool "Enable Hysteresis on PORTF {8, 9}" +config GPIO_HYST_PORTF_10 + bool "Enable Hysteresis on PORTF 10" +config GPIO_HYST_PORTF_11 + bool "Enable Hysteresis on PORTF 11" +config GPIO_HYST_PORTF_12_13 + bool "Enable Hysteresis on PORTF {12, 13}" +config GPIO_HYST_PORTF_14_15 + bool "Enable Hysteresis on PORTF {14, 15}" +endmenu + +menu "PORT G" + depends on BFIN_HYSTERESIS_CONTROL +config GPIO_HYST_PORTG_0 + bool "Enable Hysteresis on PORTG 0" +config GPIO_HYST_PORTG_1_4 + bool "Enable Hysteresis on PORTG {1...4}" +config GPIO_HYST_PORTG_5_6 + bool "Enable Hysteresis on PORTG {5, 6}" +config GPIO_HYST_PORTG_7_8 + bool "Enable Hysteresis on PORTG {7, 8}" +config GPIO_HYST_PORTG_9 + bool "Enable Hysteresis on PORTG 9" +config GPIO_HYST_PORTG_10 + bool "Enable Hysteresis on PORTG 10" +config GPIO_HYST_PORTG_11_13 + bool "Enable Hysteresis on PORTG {11...13}" +config GPIO_HYST_PORTG_14_15 + bool "Enable Hysteresis on PORTG {14, 15}" +endmenu + +menu "PORT H" + depends on BFIN_HYSTERESIS_CONTROL +config GPIO_HYST_PORTH_0_7 + bool "Enable Hysteresis on PORTH {0...7}" + +endmenu + +menu "None-GPIO" + depends on BFIN_HYSTERESIS_CONTROL +config NONEGPIO_HYST_NMI_RST_BMODE + bool "Enable Hysteresis on {NMI, RESET, BMODE}" +config NONEGPIO_HYST_JTAG + bool "Enable Hysteresis on JTAG" +endmenu + comment "Interrupt Priority Assignment" menu "Priority" diff --git a/arch/blackfin/mach-bf518/include/mach/bf518.h b/arch/blackfin/mach-bf518/include/mach/bf518.h index 856b330ecf0b..6906dee4f4cc 100644 --- a/arch/blackfin/mach-bf518/include/mach/bf518.h +++ b/arch/blackfin/mach-bf518/include/mach/bf518.h @@ -85,6 +85,111 @@ #define AMGCTLVAL (V_AMBEN | V_AMCKEN | V_CDPRIO) +/**************************** Hysteresis Settings ****************************/ + +#ifdef CONFIG_BFIN_HYSTERESIS_CONTROL +#ifdef CONFIG_GPIO_HYST_PORTF_0_7 +#define HYST_PORTF_0_7 (1 << 0) +#else +#define HYST_PORTF_0_7 (0 << 0) +#endif +#ifdef CONFIG_GPIO_HYST_PORTF_8_9 +#define HYST_PORTF_8_9 (1 << 2) +#else +#define HYST_PORTF_8_9 (0 << 2) +#endif +#ifdef CONFIG_GPIO_HYST_PORTF_10 +#define HYST_PORTF_10 (1 << 4) +#else +#define HYST_PORTF_10 (0 << 4) +#endif +#ifdef CONFIG_GPIO_HYST_PORTF_11 +#define HYST_PORTF_11 (1 << 6) +#else +#define HYST_PORTF_11 (0 << 6) +#endif +#ifdef CONFIG_GPIO_HYST_PORTF_12_13 +#define HYST_PORTF_12_13 (1 << 8) +#else +#define HYST_PORTF_12_13 (0 << 8) +#endif +#ifdef CONFIG_GPIO_HYST_PORTF_14_15 +#define HYST_PORTF_14_15 (1 << 10) +#else +#define HYST_PORTF_14_15 (0 << 10) +#endif + +#define HYST_PORTF_0_15 (HYST_PORTF_0_7 | HYST_PORTF_8_9 | HYST_PORTF_10 | \ + HYST_PORTF_11 | HYST_PORTF_12_13 | HYST_PORTF_14_15) + +#ifdef CONFIG_GPIO_HYST_PORTG_0 +#define HYST_PORTG_0 (1 << 0) +#else +#define HYST_PORTG_0 (0 << 0) +#endif +#ifdef CONFIG_GPIO_HYST_PORTG_1_4 +#define HYST_PORTG_1_4 (1 << 2) +#else +#define HYST_PORTG_1_4 (0 << 2) +#endif +#ifdef CONFIG_GPIO_HYST_PORTG_5_6 +#define HYST_PORTG_5_6 (1 << 4) +#else +#define HYST_PORTG_5_6 (0 << 4) +#endif +#ifdef CONFIG_GPIO_HYST_PORTG_7_8 +#define HYST_PORTG_7_8 (1 << 6) +#else +#define HYST_PORTG_7_8 (0 << 6) +#endif +#ifdef CONFIG_GPIO_HYST_PORTG_9 +#define HYST_PORTG_9 (1 << 8) +#else +#define HYST_PORTG_9 (0 << 8) +#endif +#ifdef CONFIG_GPIO_HYST_PORTG_10 +#define HYST_PORTG_10 (1 << 10) +#else +#define HYST_PORTG_10 (0 << 10) +#endif +#ifdef CONFIG_GPIO_HYST_PORTG_11_13 +#define HYST_PORTG_11_13 (1 << 12) +#else +#define HYST_PORTG_11_13 (0 << 12) +#endif +#ifdef CONFIG_GPIO_HYST_PORTG_14_15 +#define HYST_PORTG_14_15 (1 << 14) +#else +#define HYST_PORTG_14_15 (0 << 14) +#endif + +#define HYST_PORTG_0_15 (HYST_PORTG_0 | HYST_PORTG_1_4 | HYST_PORTG_5_6 | \ + HYST_PORTG_7_8 | HYST_PORTG_9 | HYST_PORTG_10 | \ + HYST_PORTG_11_13 | HYST_PORTG_14_15) + +#ifdef CONFIG_GPIO_HYST_PORTH_0_7 +#define HYST_PORTH_0_7 (1 << 0) +#else +#define HYST_PORTH_0_7 (0 << 0) +#endif + +#define HYST_PORTH_0_15 (HYST_PORTH_0_7) + +#ifdef CONFIG_NONEGPIO_HYST_NMI_RST_BMODE +#define HYST_NMI_RST_BMODE (1 << 2) +#else +#define HYST_NMI_RST_BMODE (0 << 2) +#endif +#ifdef CONFIG_NONEGPIO_HYST_JTAG +#define HYST_JTAG (1 << 4) +#else +#define HYST_JTAG (0 << 4) +#endif + +#define HYST_NONEGPIO (HYST_NMI_RST_BMODE | HYST_JTAG) +#define HYST_NONEGPIO_MASK (0x3C) +#endif /* CONFIG_BFIN_HYSTERESIS_CONTROL */ + #ifdef CONFIG_BF518 #define CPU "BF518" #define CPUID 0x27e8 diff --git a/arch/blackfin/mach-bf527/Kconfig b/arch/blackfin/mach-bf527/Kconfig index 1f8cbe9d6b9a..0ba54701af0b 100644 --- a/arch/blackfin/mach-bf527/Kconfig +++ b/arch/blackfin/mach-bf527/Kconfig @@ -79,6 +79,72 @@ config BF527_NAND_D_PORTH PORT H endchoice +comment "Hysteresis/Schmitt Trigger Control" +config BFIN_HYSTERESIS_CONTROL + bool "Enable Hysteresis Control" + help + The ADSP-BF52x allows to control input hysteresis for Port F, + Port G and Port H and other processor signal inputs. + The Schmitt trigger enables can be set only for pin groups. + Saying Y will overwrite the default reset or boot loader + initialization. + +menu "PORT F" + depends on BFIN_HYSTERESIS_CONTROL +config GPIO_HYST_PORTF_0_7 + bool "Enable Hysteresis on PORTF {0...7}" +config GPIO_HYST_PORTF_8_9 + bool "Enable Hysteresis on PORTF {8, 9}" +config GPIO_HYST_PORTF_10 + bool "Enable Hysteresis on PORTF 10" +config GPIO_HYST_PORTF_11 + bool "Enable Hysteresis on PORTF 11" +config GPIO_HYST_PORTF_12_13 + bool "Enable Hysteresis on PORTF {12, 13}" +config GPIO_HYST_PORTF_14_15 + bool "Enable Hysteresis on PORTF {14, 15}" +endmenu + +menu "PORT G" + depends on BFIN_HYSTERESIS_CONTROL +config GPIO_HYST_PORTG_0 + bool "Enable Hysteresis on PORTG 0" +config GPIO_HYST_PORTG_1_4 + bool "Enable Hysteresis on PORTG {1...4}" +config GPIO_HYST_PORTG_5_6 + bool "Enable Hysteresis on PORTG {5, 6}" +config GPIO_HYST_PORTG_7_8 + bool "Enable Hysteresis on PORTG {7, 8}" +config GPIO_HYST_PORTG_9 + bool "Enable Hysteresis on PORTG 9" +config GPIO_HYST_PORTG_10 + bool "Enable Hysteresis on PORTG 10" +config GPIO_HYST_PORTG_11_13 + bool "Enable Hysteresis on PORTG {11...13}" +config GPIO_HYST_PORTG_14_15 + bool "Enable Hysteresis on PORTG {14, 15}" +endmenu + +menu "PORT H" + depends on BFIN_HYSTERESIS_CONTROL +config GPIO_HYST_PORTH_0_7 + bool "Enable Hysteresis on PORTH {0...7}" +config GPIO_HYST_PORTH_8 + bool "Enable Hysteresis on PORTH 8" +config GPIO_HYST_PORTH_9_15 + bool "Enable Hysteresis on PORTH {9...15}" +endmenu + +menu "None-GPIO" + depends on BFIN_HYSTERESIS_CONTROL +config NONEGPIO_HYST_TMR0_FS1_PPICLK + bool "Enable Hysteresis on {TMR0, PPI_FS1, PPI_CLK}" +config NONEGPIO_HYST_NMI_RST_BMODE + bool "Enable Hysteresis on {NMI, RESET, BMODE}" +config NONEGPIO_HYST_JTAG + bool "Enable Hysteresis on JTAG" +endmenu + comment "Interrupt Priority Assignment" menu "Priority" diff --git a/arch/blackfin/mach-bf527/include/mach/bf527.h b/arch/blackfin/mach-bf527/include/mach/bf527.h index ff68c8897087..8ff155b34f64 100644 --- a/arch/blackfin/mach-bf527/include/mach/bf527.h +++ b/arch/blackfin/mach-bf527/include/mach/bf527.h @@ -85,6 +85,126 @@ #define AMGCTLVAL (V_AMBEN | V_AMCKEN | V_CDPRIO) +/**************************** Hysteresis Settings ****************************/ + +#ifdef CONFIG_BFIN_HYSTERESIS_CONTROL +#ifdef CONFIG_GPIO_HYST_PORTF_0_7 +#define HYST_PORTF_0_7 (1 << 0) +#else +#define HYST_PORTF_0_7 (0 << 0) +#endif +#ifdef CONFIG_GPIO_HYST_PORTF_8_9 +#define HYST_PORTF_8_9 (1 << 2) +#else +#define HYST_PORTF_8_9 (0 << 2) +#endif +#ifdef CONFIG_GPIO_HYST_PORTF_10 +#define HYST_PORTF_10 (1 << 4) +#else +#define HYST_PORTF_10 (0 << 4) +#endif +#ifdef CONFIG_GPIO_HYST_PORTF_11 +#define HYST_PORTF_11 (1 << 6) +#else +#define HYST_PORTF_11 (0 << 6) +#endif +#ifdef CONFIG_GPIO_HYST_PORTF_12_13 +#define HYST_PORTF_12_13 (1 << 8) +#else +#define HYST_PORTF_12_13 (0 << 8) +#endif +#ifdef CONFIG_GPIO_HYST_PORTF_14_15 +#define HYST_PORTF_14_15 (1 << 10) +#else +#define HYST_PORTF_14_15 (0 << 10) +#endif + +#define HYST_PORTF_0_15 (HYST_PORTF_0_7 | HYST_PORTF_8_9 | HYST_PORTF_10 | \ + HYST_PORTF_11 | HYST_PORTF_12_13 | HYST_PORTF_14_15) + +#ifdef CONFIG_GPIO_HYST_PORTG_0 +#define HYST_PORTG_0 (1 << 0) +#else +#define HYST_PORTG_0 (0 << 0) +#endif +#ifdef CONFIG_GPIO_HYST_PORTG_1_4 +#define HYST_PORTG_1_4 (1 << 2) +#else +#define HYST_PORTG_1_4 (0 << 2) +#endif +#ifdef CONFIG_GPIO_HYST_PORTG_5_6 +#define HYST_PORTG_5_6 (1 << 4) +#else +#define HYST_PORTG_5_6 (0 << 4) +#endif +#ifdef CONFIG_GPIO_HYST_PORTG_7_8 +#define HYST_PORTG_7_8 (1 << 6) +#else +#define HYST_PORTG_7_8 (0 << 6) +#endif +#ifdef CONFIG_GPIO_HYST_PORTG_9 +#define HYST_PORTG_9 (1 << 8) +#else +#define HYST_PORTG_9 (0 << 8) +#endif +#ifdef CONFIG_GPIO_HYST_PORTG_10 +#define HYST_PORTG_10 (1 << 10) +#else +#define HYST_PORTG_10 (0 << 10) +#endif +#ifdef CONFIG_GPIO_HYST_PORTG_11_13 +#define HYST_PORTG_11_13 (1 << 12) +#else +#define HYST_PORTG_11_13 (0 << 12) +#endif +#ifdef CONFIG_GPIO_HYST_PORTG_14_15 +#define HYST_PORTG_14_15 (1 << 14) +#else +#define HYST_PORTG_14_15 (0 << 14) +#endif + +#define HYST_PORTG_0_15 (HYST_PORTG_0 | HYST_PORTG_1_4 | HYST_PORTG_5_6 | \ + HYST_PORTG_7_8 | HYST_PORTG_9 | HYST_PORTG_10 | \ + HYST_PORTG_11_13 | HYST_PORTG_14_15) + +#ifdef CONFIG_GPIO_HYST_PORTH_0_7 +#define HYST_PORTH_0_7 (1 << 0) +#else +#define HYST_PORTH_0_7 (0 << 0) +#endif +#ifdef CONFIG_GPIO_HYST_PORTH_8 +#define HYST_PORTH_8 (1 << 2) +#else +#define HYST_PORTH_8 (0 << 2) +#endif +#ifdef CONFIG_GPIO_HYST_PORTH_9_15 +#define HYST_PORTH_9_15 (1 << 4) +#else +#define HYST_PORTH_9_15 (0 << 4) +#endif + +#define HYST_PORTH_0_15 (HYST_PORTH_0_7 | HYST_PORTH_8 | HYST_PORTH_9_15) + +#ifdef CONFIG_NONEGPIO_HYST_TMR0_FS1_PPICLK +#define HYST_TMR0_FS1_PPICLK (1 << 0) +#else +#define HYST_TMR0_FS1_PPICLK (0 << 0) +#endif +#ifdef CONFIG_NONEGPIO_HYST_NMI_RST_BMODE +#define HYST_NMI_RST_BMODE (1 << 2) +#else +#define HYST_NMI_RST_BMODE (0 << 2) +#endif +#ifdef CONFIG_NONEGPIO_HYST_JTAG +#define HYST_JTAG (1 << 4) +#else +#define HYST_JTAG (0 << 4) +#endif + +#define HYST_NONEGPIO (HYST_TMR0_FS1_PPICLK | HYST_NMI_RST_BMODE | HYST_JTAG) +#define HYST_NONEGPIO_MASK (0x3F) +#endif /* CONFIG_BFIN_HYSTERESIS_CONTROL */ + #ifdef CONFIG_BF527 #define CPU "BF527" #define CPUID 0x27e0 -- cgit v1.2.2