From 7163c7c9d266862ad9a0a0203d204113034cb5fb Mon Sep 17 00:00:00 2001 From: Ishizaki Kou Date: Fri, 2 Feb 2007 16:38:41 +0900 Subject: [POWERPC] Celleb: setup usb host controller in SCC USB host controller in SCC requires enable sequence. It should be done before USB host drivers start. Signed-off-by: Kou Ishizaki Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/celleb/scc_uhc.c | 94 +++++++++++++++++++++++++++++++++ 1 file changed, 94 insertions(+) create mode 100644 arch/powerpc/platforms/celleb/scc_uhc.c (limited to 'arch') diff --git a/arch/powerpc/platforms/celleb/scc_uhc.c b/arch/powerpc/platforms/celleb/scc_uhc.c new file mode 100644 index 000000000000..a7c548bde2e3 --- /dev/null +++ b/arch/powerpc/platforms/celleb/scc_uhc.c @@ -0,0 +1,94 @@ +/* + * SCC (Super Companion Chip) UHC setup + * + * (C) Copyright 2006-2007 TOSHIBA CORPORATION + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include +#include + +#include +#include +#include + +#include "scc.h" + +#define UHC_RESET_WAIT_MAX 10000 + +static inline int uhc_clkctrl_ready(u32 val) +{ + const u32 mask = SCC_UHC_USBCEN | SCC_UHC_USBCEN; + return((val & mask) == mask); +} + +/* + * UHC(usb host controler) enable function. + * affect to both of OHCI and EHCI core module. + */ +static void enable_scc_uhc(struct pci_dev *dev) +{ + void __iomem *uhc_base; + u32 __iomem *uhc_clkctrl; + u32 __iomem *uhc_ecmode; + u32 val = 0; + int i; + + if (!machine_is(celleb)) + return; + + uhc_base = ioremap(pci_resource_start(dev, 0), + pci_resource_len(dev, 0)); + if (!uhc_base) { + printk(KERN_ERR "failed to map UHC register base.\n"); + return; + } + uhc_clkctrl = uhc_base + SCC_UHC_CKRCTRL; + uhc_ecmode = uhc_base + SCC_UHC_ECMODE; + + /* setup for normal mode */ + val |= SCC_UHC_F48MCKLEN; + out_be32(uhc_clkctrl, val); + val |= SCC_UHC_PHY_SUSPEND_SEL; + out_be32(uhc_clkctrl, val); + udelay(10); + val |= SCC_UHC_PHYEN; + out_be32(uhc_clkctrl, val); + udelay(50); + + /* disable reset */ + val |= SCC_UHC_HCLKEN; + out_be32(uhc_clkctrl, val); + val |= (SCC_UHC_USBCEN | SCC_UHC_USBEN); + out_be32(uhc_clkctrl, val); + i = 0; + while (!uhc_clkctrl_ready(in_be32(uhc_clkctrl))) { + udelay(10); + if (i++ > UHC_RESET_WAIT_MAX) { + printk(KERN_ERR "Failed to disable UHC reset %x\n", + in_be32(uhc_clkctrl)); + break; + } + } + + /* Endian Conversion Mode for Master ALL area */ + out_be32(uhc_ecmode, SCC_UHC_ECMODE_BY_BYTE); + + iounmap(uhc_base); +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA_2, + PCI_DEVICE_ID_TOSHIBA_SCC_USB, enable_scc_uhc); -- cgit v1.2.2