From 4aa5f366431fef0afca0df348ca9782c63ac9911 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Fri, 21 Jan 2011 14:11:55 +0000 Subject: avr32: at32ap700x: specify DMA src and dst masters Now that the dw_dmac DMA driver supports configurable source and destination masters we need to specify which ones to use. This was previously hardcoded to 0 and 1 respectively in the driver. Acked-by: Hans-Christian Egtvedt Signed-off-by: Jamie Iles Signed-off-by: Dan Williams --- arch/avr32/mach-at32ap/at32ap700x.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index e67c99945428..2747cde8c9a7 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -2048,6 +2048,8 @@ at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data, rx_dws->reg_width = DW_DMA_SLAVE_WIDTH_16BIT; rx_dws->cfg_hi = DWC_CFGH_SRC_PER(3); rx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL); + rx_dws->src_master = 0; + rx_dws->dst_master = 1; } /* Check if DMA slave interface for playback should be configured. */ @@ -2056,6 +2058,8 @@ at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data, tx_dws->reg_width = DW_DMA_SLAVE_WIDTH_16BIT; tx_dws->cfg_hi = DWC_CFGH_DST_PER(4); tx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL); + rx_dws->src_master = 0; + rx_dws->dst_master = 1; } if (platform_device_add_data(pdev, data, @@ -2128,6 +2132,8 @@ at32_add_device_abdac(unsigned int id, struct atmel_abdac_pdata *data) dws->reg_width = DW_DMA_SLAVE_WIDTH_32BIT; dws->cfg_hi = DWC_CFGH_DST_PER(2); dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL); + dws->src_master = 0; + dws->dst_master = 1; if (platform_device_add_data(pdev, data, sizeof(struct atmel_abdac_pdata))) -- cgit v1.2.2 From ac2c0a387194f45c759572b3462d1bf92ec92f00 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Tue, 25 Jan 2011 11:18:11 +0100 Subject: dma40: allow realtime and priority for event lines DB8500v2's DMA40 (revision 3) allows setting event lines as high priority and real time. Acked-by: Per Forlin Acked-by: Jonas Aaberg Signed-off-by: Rabin Vincent Signed-off-by: Linus Walleij Signed-off-by: Dan Williams --- arch/arm/plat-nomadik/include/plat/ste_dma40.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/plat-nomadik/include/plat/ste_dma40.h b/arch/arm/plat-nomadik/include/plat/ste_dma40.h index 4d6dd4c39b75..8358f857a29e 100644 --- a/arch/arm/plat-nomadik/include/plat/ste_dma40.h +++ b/arch/arm/plat-nomadik/include/plat/ste_dma40.h @@ -104,6 +104,8 @@ struct stedma40_half_channel_info { * * @dir: MEM 2 MEM, PERIPH 2 MEM , MEM 2 PERIPH, PERIPH 2 PERIPH * @high_priority: true if high-priority + * @realtime: true if realtime mode is to be enabled. Only available on DMA40 + * version 3+, i.e DB8500v2+ * @mode: channel mode: physical, logical, or operation * @mode_opt: options for the chosen channel mode * @src_dev_type: Src device type @@ -119,6 +121,7 @@ struct stedma40_half_channel_info { struct stedma40_chan_cfg { enum stedma40_xfer_dir dir; bool high_priority; + bool realtime; enum stedma40_mode mode; enum stedma40_mode_opt mode_opt; int src_dev_type; -- cgit v1.2.2 From 10a946b3a4e1ad665a81981cbe33c3d3903cd7da Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Tue, 25 Jan 2011 11:18:22 +0100 Subject: dma40: remove export of stedma40_memcpy_sg The dmaengine framework has the API for this now. Acked-by: Per Forlin Acked-by: Jonas Aaberg Signed-off-by: Rabin Vincent Signed-off-by: Linus Walleij Signed-off-by: Dan Williams --- arch/arm/plat-nomadik/include/plat/ste_dma40.h | 19 ------------------- 1 file changed, 19 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-nomadik/include/plat/ste_dma40.h b/arch/arm/plat-nomadik/include/plat/ste_dma40.h index 8358f857a29e..c44886062f8e 100644 --- a/arch/arm/plat-nomadik/include/plat/ste_dma40.h +++ b/arch/arm/plat-nomadik/include/plat/ste_dma40.h @@ -171,25 +171,6 @@ struct stedma40_platform_data { bool stedma40_filter(struct dma_chan *chan, void *data); -/** - * stedma40_memcpy_sg() - extension of the dma framework, memcpy to/from - * scattergatter lists. - * - * @chan: dmaengine handle - * @sgl_dst: Destination scatter list - * @sgl_src: Source scatter list - * @sgl_len: The length of each scatterlist. Both lists must be of equal length - * and each element must match the corresponding element in the other scatter - * list. - * @flags: is actually enum dma_ctrl_flags. See dmaengine.h - */ - -struct dma_async_tx_descriptor *stedma40_memcpy_sg(struct dma_chan *chan, - struct scatterlist *sgl_dst, - struct scatterlist *sgl_src, - unsigned int sgl_len, - unsigned long flags); - /** * stedma40_slave_mem() - Transfers a raw data buffer to or from a slave * (=device) -- cgit v1.2.2 From a580b8c5429a624d120cd603e1498bf676e2b4da Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sun, 27 Feb 2011 00:47:42 +0800 Subject: dmaengine: mxs-dma: add dma support for i.MX23/28 This patch adds dma support for Freescale MXS-based SoC i.MX23/28, including apbh-dma and apbx-dma. * apbh-dma and apbx-dma are supported in the driver as two mxs-dma instances. * apbh-dma is different between mx23 and mx28, hardware version register is used to differentiate. * mxs-dma supports pio function besides data transfer. The driver uses dma_data_direction DMA_NONE to identify the pio mode, and steals sgl and sg_len to get pio words and numbers from clients. * mxs dmaengine has some very specific features, like sense function and the special NAND support (nand_lock, nand_wait4ready). These are too specific to implemented in generic dmaengine driver. * The driver refers to imx-sdma and only a single descriptor is statically assigned to each channel. Signed-off-by: Shawn Guo Signed-off-by: Vinod Koul --- arch/arm/mach-mxs/include/mach/dma.h | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 arch/arm/mach-mxs/include/mach/dma.h (limited to 'arch') diff --git a/arch/arm/mach-mxs/include/mach/dma.h b/arch/arm/mach-mxs/include/mach/dma.h new file mode 100644 index 000000000000..7f4aeeaba8df --- /dev/null +++ b/arch/arm/mach-mxs/include/mach/dma.h @@ -0,0 +1,26 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_MXS_DMA_H__ +#define __MACH_MXS_DMA_H__ + +struct mxs_dma_data { + int chan_irq; +}; + +static inline int mxs_dma_is_apbh(struct dma_chan *chan) +{ + return !strcmp(dev_name(chan->device->dev), "mxs-dma-apbh"); +} + +static inline int mxs_dma_is_apbx(struct dma_chan *chan) +{ + return !strcmp(dev_name(chan->device->dev), "mxs-dma-apbx"); +} + +#endif /* __MACH_MXS_DMA_H__ */ -- cgit v1.2.2 From 1c5b0538c719f52cface39f699fb5d39a50149d6 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 3 Mar 2011 15:47:26 +0530 Subject: avr32: at32ap700x: Specify DMA Flow Controller, Src and Dst msize Now that the dw_dmac DMA driver supports configurable Flow Controller, source and destination burst or msize, we need to specify which ones to use. Msize or burst size was previously hardcoded to 1, Flow controller was DMA for both M2P & P2M transfers. Signed-off-by: Viresh Kumar Signed-off-by: Vinod Koul --- arch/avr32/mach-at32ap/at32ap700x.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index 2747cde8c9a7..b4aaebd8780c 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -2050,6 +2050,9 @@ at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data, rx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL); rx_dws->src_master = 0; rx_dws->dst_master = 1; + rx_dws->src_msize = DW_DMA_MSIZE_1; + rx_dws->dst_msize = DW_DMA_MSIZE_1; + rx_dws->fc = DW_DMA_FC_D_P2M; } /* Check if DMA slave interface for playback should be configured. */ @@ -2060,6 +2063,9 @@ at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data, tx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL); rx_dws->src_master = 0; rx_dws->dst_master = 1; + tx_dws->src_msize = DW_DMA_MSIZE_1; + tx_dws->dst_msize = DW_DMA_MSIZE_1; + tx_dws->fc = DW_DMA_FC_D_M2P; } if (platform_device_add_data(pdev, data, @@ -2134,6 +2140,9 @@ at32_add_device_abdac(unsigned int id, struct atmel_abdac_pdata *data) dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL); dws->src_master = 0; dws->dst_master = 1; + dws->src_msize = DW_DMA_MSIZE_1; + dws->dst_msize = DW_DMA_MSIZE_1; + dws->fc = DW_DMA_FC_D_M2P; if (platform_device_add_data(pdev, data, sizeof(struct atmel_abdac_pdata))) -- cgit v1.2.2 From 3ea205c449d2b5996d0256aa8b2894f7aea228a2 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Tue, 22 Mar 2011 15:34:56 -0700 Subject: avr32: at32ap700x: fix typo in DMA master configuration Commit 4aa5f366431fe (avr32: at32ap700x: specify DMA src and dst masters) specified the masters for the ac97c playback device but incorrectly set them in the capture slave information rather than playback. Cc: Hans-Christian Egtvedt Reported-by: Nicolas Ferre Signed-off-by: Jamie Iles Acked-by: Vinod Koul [rebased on dmaengine for 2.6.39 (d42efe6b)] Signed-off-by: Dan Williams --- arch/avr32/mach-at32ap/at32ap700x.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index b4aaebd8780c..bfc9d071db9b 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -2061,8 +2061,8 @@ at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data, tx_dws->reg_width = DW_DMA_SLAVE_WIDTH_16BIT; tx_dws->cfg_hi = DWC_CFGH_DST_PER(4); tx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL); - rx_dws->src_master = 0; - rx_dws->dst_master = 1; + tx_dws->src_master = 0; + tx_dws->dst_master = 1; tx_dws->src_msize = DW_DMA_MSIZE_1; tx_dws->dst_msize = DW_DMA_MSIZE_1; tx_dws->fc = DW_DMA_FC_D_M2P; -- cgit v1.2.2