From 5de62b86d2f5cf3459cb02ecb7a4530787bbd898 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 7 Dec 2010 16:26:58 -0800 Subject: omap1: Fix gpio mpuio bank to work for multi-omap for 7xx/15xx/16xx We need to divide the 15xx/16xx offset by 2 for 7xx. Use bank->stride for that. This allows us to get rid of the duplicate defines for the MPUIO registers. Note that this will cause omap-keypad.c driver to not work on 7xx. However, the right fix there is to move over to matrix_keypad instead as suggested by Cory Maccarrone and Janusz Krzysztofik . Cc: Cory Maccarrone Acked-by: Janusz Krzysztofik Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/gpio15xx.c | 1 + arch/arm/mach-omap1/gpio16xx.c | 1 + arch/arm/mach-omap1/gpio7xx.c | 1 + arch/arm/plat-omap/gpio.c | 33 +++++++++++++++++++-------------- arch/arm/plat-omap/include/plat/gpio.h | 22 +++++----------------- 5 files changed, 27 insertions(+), 31 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c index dbd81688eada..04c4b04cf54e 100644 --- a/arch/arm/mach-omap1/gpio15xx.c +++ b/arch/arm/mach-omap1/gpio15xx.c @@ -38,6 +38,7 @@ static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = { .virtual_irq_start = IH_MPUIO_BASE, .bank_type = METHOD_MPUIO, .bank_width = 16, + .bank_stride = 1, }; static struct __initdata platform_device omap15xx_mpu_gpio = { diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c index 8d4d0a061b56..5dd0d4c82b24 100644 --- a/arch/arm/mach-omap1/gpio16xx.c +++ b/arch/arm/mach-omap1/gpio16xx.c @@ -41,6 +41,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = { .virtual_irq_start = IH_MPUIO_BASE, .bank_type = METHOD_MPUIO, .bank_width = 16, + .bank_stride = 1, }; static struct __initdata platform_device omap16xx_mpu_gpio = { diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c index 94bccd44181d..1204c8b871af 100644 --- a/arch/arm/mach-omap1/gpio7xx.c +++ b/arch/arm/mach-omap1/gpio7xx.c @@ -43,6 +43,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = { .virtual_irq_start = IH_MPUIO_BASE, .bank_type = METHOD_MPUIO, .bank_width = 32, + .bank_stride = 2, }; static struct __initdata platform_device omap7xx_mpu_gpio = { diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 6f53dee98a91..8d493b992e70 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -159,6 +159,7 @@ struct gpio_bank { u32 dbck_enable_mask; struct device *dev; bool dbck_flag; + int stride; }; #ifdef CONFIG_ARCH_OMAP3 @@ -267,7 +268,7 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) switch (bank->method) { #ifdef CONFIG_ARCH_OMAP1 case METHOD_MPUIO: - reg += OMAP_MPUIO_IO_CNTL; + reg += OMAP_MPUIO_IO_CNTL / bank->stride; break; #endif #ifdef CONFIG_ARCH_OMAP15XX @@ -315,7 +316,7 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) switch (bank->method) { #ifdef CONFIG_ARCH_OMAP1 case METHOD_MPUIO: - reg += OMAP_MPUIO_OUTPUT; + reg += OMAP_MPUIO_OUTPUT / bank->stride; l = __raw_readl(reg); if (enable) l |= 1 << gpio; @@ -387,7 +388,7 @@ static int _get_gpio_datain(struct gpio_bank *bank, int gpio) switch (bank->method) { #ifdef CONFIG_ARCH_OMAP1 case METHOD_MPUIO: - reg += OMAP_MPUIO_INPUT_LATCH; + reg += OMAP_MPUIO_INPUT_LATCH / bank->stride; break; #endif #ifdef CONFIG_ARCH_OMAP15XX @@ -433,7 +434,7 @@ static int _get_gpio_dataout(struct gpio_bank *bank, int gpio) switch (bank->method) { #ifdef CONFIG_ARCH_OMAP1 case METHOD_MPUIO: - reg += OMAP_MPUIO_OUTPUT; + reg += OMAP_MPUIO_OUTPUT / bank->stride; break; #endif #ifdef CONFIG_ARCH_OMAP15XX @@ -620,7 +621,7 @@ static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio) switch (bank->method) { case METHOD_MPUIO: - reg += OMAP_MPUIO_GPIO_INT_EDGE; + reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride; break; #ifdef CONFIG_ARCH_OMAP15XX case METHOD_GPIO_1510: @@ -654,7 +655,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) switch (bank->method) { #ifdef CONFIG_ARCH_OMAP1 case METHOD_MPUIO: - reg += OMAP_MPUIO_GPIO_INT_EDGE; + reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride; l = __raw_readl(reg); if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) bank->toggle_mask |= 1 << gpio; @@ -840,7 +841,7 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank) switch (bank->method) { #ifdef CONFIG_ARCH_OMAP1 case METHOD_MPUIO: - reg += OMAP_MPUIO_GPIO_MASKIT; + reg += OMAP_MPUIO_GPIO_MASKIT / bank->stride; mask = 0xffff; inv = 1; break; @@ -897,7 +898,7 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab switch (bank->method) { #ifdef CONFIG_ARCH_OMAP1 case METHOD_MPUIO: - reg += OMAP_MPUIO_GPIO_MASKIT; + reg += OMAP_MPUIO_GPIO_MASKIT / bank->stride; l = __raw_readl(reg); if (enable) l &= ~(gpio_mask); @@ -1147,7 +1148,8 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) bank = get_irq_data(irq); #ifdef CONFIG_ARCH_OMAP1 if (bank->method == METHOD_MPUIO) - isr_reg = bank->base + OMAP_MPUIO_GPIO_INT; + isr_reg = bank->base + + OMAP_MPUIO_GPIO_INT / bank->stride; #endif #ifdef CONFIG_ARCH_OMAP15XX if (bank->method == METHOD_GPIO_1510) @@ -1345,7 +1347,8 @@ static int omap_mpuio_suspend_noirq(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct gpio_bank *bank = platform_get_drvdata(pdev); - void __iomem *mask_reg = bank->base + OMAP_MPUIO_GPIO_MASKIT; + void __iomem *mask_reg = bank->base + + OMAP_MPUIO_GPIO_MASKIT / bank->stride; unsigned long flags; spin_lock_irqsave(&bank->lock, flags); @@ -1360,7 +1363,8 @@ static int omap_mpuio_resume_noirq(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct gpio_bank *bank = platform_get_drvdata(pdev); - void __iomem *mask_reg = bank->base + OMAP_MPUIO_GPIO_MASKIT; + void __iomem *mask_reg = bank->base + + OMAP_MPUIO_GPIO_MASKIT / bank->stride; unsigned long flags; spin_lock_irqsave(&bank->lock, flags); @@ -1440,7 +1444,7 @@ static int gpio_is_input(struct gpio_bank *bank, int mask) switch (bank->method) { case METHOD_MPUIO: - reg += OMAP_MPUIO_IO_CNTL; + reg += OMAP_MPUIO_IO_CNTL / bank->stride; break; case METHOD_GPIO_1510: reg += OMAP1510_GPIO_DIR_CONTROL; @@ -1601,8 +1605,8 @@ static void omap_gpio_mod_init(struct gpio_bank *bank, int id) } } else if (cpu_class_is_omap1()) { if (bank_is_mpuio(bank)) - __raw_writew(0xffff, bank->base - + OMAP_MPUIO_GPIO_MASKIT); + __raw_writew(0xffff, bank->base + + OMAP_MPUIO_GPIO_MASKIT / bank->stride); if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) { __raw_writew(0xffff, bank->base + OMAP1510_GPIO_INT_MASK); @@ -1716,6 +1720,7 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev) bank->method = pdata->bank_type; bank->dev = &pdev->dev; bank->dbck_flag = pdata->dbck_flag; + bank->stride = pdata->bank_stride; bank_width = pdata->bank_width; spin_lock_init(&bank->lock); diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h index 5f118ff0d3eb..41ff2f8943f0 100644 --- a/arch/arm/plat-omap/include/plat/gpio.h +++ b/arch/arm/plat-omap/include/plat/gpio.h @@ -32,22 +32,10 @@ #define OMAP1_MPUIO_BASE 0xfffb5000 -#if (defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)) - -#define OMAP_MPUIO_INPUT_LATCH 0x00 -#define OMAP_MPUIO_OUTPUT 0x02 -#define OMAP_MPUIO_IO_CNTL 0x04 -#define OMAP_MPUIO_KBR_LATCH 0x08 -#define OMAP_MPUIO_KBC 0x0a -#define OMAP_MPUIO_GPIO_EVENT_MODE 0x0c -#define OMAP_MPUIO_GPIO_INT_EDGE 0x0e -#define OMAP_MPUIO_KBD_INT 0x10 -#define OMAP_MPUIO_GPIO_INT 0x12 -#define OMAP_MPUIO_KBD_MASKIT 0x14 -#define OMAP_MPUIO_GPIO_MASKIT 0x16 -#define OMAP_MPUIO_GPIO_DEBOUNCING 0x18 -#define OMAP_MPUIO_LATCH 0x1a -#else +/* + * These are the omap15xx/16xx offsets. The omap7xx offset are + * OMAP_MPUIO_ / 2 offsets below. + */ #define OMAP_MPUIO_INPUT_LATCH 0x00 #define OMAP_MPUIO_OUTPUT 0x04 #define OMAP_MPUIO_IO_CNTL 0x08 @@ -61,7 +49,6 @@ #define OMAP_MPUIO_GPIO_MASKIT 0x2c #define OMAP_MPUIO_GPIO_DEBOUNCING 0x30 #define OMAP_MPUIO_LATCH 0x34 -#endif #define OMAP34XX_NR_GPIOS 6 @@ -88,6 +75,7 @@ struct omap_gpio_platform_data { u16 virtual_irq_start; int bank_type; int bank_width; /* GPIO bank width */ + int bank_stride; /* Only needed for omap1 MPUIO */ bool dbck_flag; /* dbck required or not - True for OMAP3&4 */ }; -- cgit v1.2.2