From 10c2df65060e1ab57b2f75e0749de0ee9b8f4810 Mon Sep 17 00:00:00 2001 From: "Hyok S. Choi" Date: Mon, 27 Mar 2006 10:21:34 +0100 Subject: [ARM] nommu: MPU support in boot/compressed/head.S This patch adds MPU support in boot/compressed/head.S. Signed-off-by: Hyok S. Choi Signed-off-by: Russell King --- arch/arm/boot/compressed/head.S | 106 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 106 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 491c7e4c9ac6..b56f5e691d65 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -2,6 +2,7 @@ * linux/arch/arm/boot/compressed/head.S * * Copyright (C) 1996-2002 Russell King + * Copyright (C) 2004 Hyok S. Choi (MPU support) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -320,6 +321,62 @@ params: ldr r0, =params_phys cache_on: mov r3, #8 @ cache_on function b call_cache_fn +/* + * Initialize the highest priority protection region, PR7 + * to cover all 32bit address and cacheable and bufferable. + */ +__armv4_mpu_cache_on: + mov r0, #0x3f @ 4G, the whole + mcr p15, 0, r0, c6, c7, 0 @ PR7 Area Setting + mcr p15, 0, r0, c6, c7, 1 + + mov r0, #0x80 @ PR7 + mcr p15, 0, r0, c2, c0, 0 @ D-cache on + mcr p15, 0, r0, c2, c0, 1 @ I-cache on + mcr p15, 0, r0, c3, c0, 0 @ write-buffer on + + mov r0, #0xc000 + mcr p15, 0, r0, c5, c0, 1 @ I-access permission + mcr p15, 0, r0, c5, c0, 0 @ D-access permission + + mov r0, #0 + mcr p15, 0, r0, c7, c10, 4 @ drain write buffer + mcr p15, 0, r0, c7, c5, 0 @ flush(inval) I-Cache + mcr p15, 0, r0, c7, c6, 0 @ flush(inval) D-Cache + mrc p15, 0, r0, c1, c0, 0 @ read control reg + @ ...I .... ..D. WC.M + orr r0, r0, #0x002d @ .... .... ..1. 11.1 + orr r0, r0, #0x1000 @ ...1 .... .... .... + + mcr p15, 0, r0, c1, c0, 0 @ write control reg + + mov r0, #0 + mcr p15, 0, r0, c7, c5, 0 @ flush(inval) I-Cache + mcr p15, 0, r0, c7, c6, 0 @ flush(inval) D-Cache + mov pc, lr + +__armv3_mpu_cache_on: + mov r0, #0x3f @ 4G, the whole + mcr p15, 0, r0, c6, c7, 0 @ PR7 Area Setting + + mov r0, #0x80 @ PR7 + mcr p15, 0, r0, c2, c0, 0 @ cache on + mcr p15, 0, r0, c3, c0, 0 @ write-buffer on + + mov r0, #0xc000 + mcr p15, 0, r0, c5, c0, 0 @ access permission + + mov r0, #0 + mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3 + mrc p15, 0, r0, c1, c0, 0 @ read control reg + @ .... .... .... WC.M + orr r0, r0, #0x000d @ .... .... .... 11.1 + mov r0, #0 + mcr p15, 0, r0, c1, c0, 0 @ write control reg + + mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3 + mov pc, lr + __setup_mmu: sub r3, r4, #16384 @ Page directory size bic r3, r3, #0xff @ Align the pointer bic r3, r3, #0x3f00 @@ -496,6 +553,18 @@ proc_types: b __armv4_mmu_cache_off mov pc, lr + .word 0x41007400 @ ARM74x + .word 0xff00ff00 + b __armv3_mpu_cache_on + b __armv3_mpu_cache_off + b __armv3_mpu_cache_flush + + .word 0x41009400 @ ARM94x + .word 0xff00ff00 + b __armv4_mpu_cache_on + b __armv4_mpu_cache_off + b __armv4_mpu_cache_flush + .word 0x00007000 @ ARM7 IDs .word 0x0000f000 mov pc, lr @@ -562,6 +631,24 @@ proc_types: cache_off: mov r3, #12 @ cache_off function b call_cache_fn +__armv4_mpu_cache_off: + mrc p15, 0, r0, c1, c0 + bic r0, r0, #0x000d + mcr p15, 0, r0, c1, c0 @ turn MPU and cache off + mov r0, #0 + mcr p15, 0, r0, c7, c10, 4 @ drain write buffer + mcr p15, 0, r0, c7, c6, 0 @ flush D-Cache + mcr p15, 0, r0, c7, c5, 0 @ flush I-Cache + mov pc, lr + +__armv3_mpu_cache_off: + mrc p15, 0, r0, c1, c0 + bic r0, r0, #0x000d + mcr p15, 0, r0, c1, c0, 0 @ turn MPU and cache off + mov r0, #0 + mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3 + mov pc, lr + __armv4_mmu_cache_off: mrc p15, 0, r0, c1, c0 bic r0, r0, #0x000d @@ -601,6 +688,24 @@ cache_clean_flush: mov r3, #16 b call_cache_fn +__armv4_mpu_cache_flush: + mov r2, #1 + mov r3, #0 + mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache + mov r1, #7 << 5 @ 8 segments +1: orr r3, r1, #63 << 26 @ 64 entries +2: mcr p15, 0, r3, c7, c14, 2 @ clean & invalidate D index + subs r3, r3, #1 << 26 + bcs 2b @ entries 63 to 0 + subs r1, r1, #1 << 5 + bcs 1b @ segments 7 to 0 + + teq r2, #0 + mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache + mcr p15, 0, ip, c7, c10, 4 @ drain WB + mov pc, lr + + __armv6_mmu_cache_flush: mov r1, #0 mcr p15, 0, r1, c7, c14, 0 @ clean+invalidate D @@ -638,6 +743,7 @@ no_cache_id: mov pc, lr __armv3_mmu_cache_flush: +__armv3_mpu_cache_flush: mov r1, #0 mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3 mov pc, lr -- cgit v1.2.2 From 75d90832d58aa5855972cfc2bdaa94970ccd4aca Mon Sep 17 00:00:00 2001 From: "Hyok S. Choi" Date: Mon, 27 Mar 2006 14:58:25 +0100 Subject: [ARM] nommu: start-up code This patch adds nommu version start-up code head-nommu.S. The common part of the start-up codes is moved to head-common.S. Signed-off-by: Hyok S. Choi Signed-off-by: Russell King --- arch/arm/Makefile | 2 +- arch/arm/kernel/head-common.S | 217 ++++++++++++++++++++++++++++++++++++++++++ arch/arm/kernel/head-nommu.S | 83 ++++++++++++++++ arch/arm/kernel/head.S | 207 +--------------------------------------- 4 files changed, 302 insertions(+), 207 deletions(-) create mode 100644 arch/arm/kernel/head-common.S create mode 100644 arch/arm/kernel/head-nommu.S (limited to 'arch') diff --git a/arch/arm/Makefile b/arch/arm/Makefile index fbfc14a56b96..e3770ed87825 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -69,7 +69,7 @@ AFLAGS +=$(CFLAGS_ABI) $(arch-y) $(tune-y) -msoft-float CHECKFLAGS += -D__arm__ #Default value -head-y := arch/arm/kernel/head.o arch/arm/kernel/init_task.o +head-y := arch/arm/kernel/head$(MMUEXT).o arch/arm/kernel/init_task.o textofs-y := 0x00008000 machine-$(CONFIG_ARCH_RPC) := rpc diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S new file mode 100644 index 000000000000..a52da0ddb43d --- /dev/null +++ b/arch/arm/kernel/head-common.S @@ -0,0 +1,217 @@ +/* + * linux/arch/arm/kernel/head-common.S + * + * Copyright (C) 1994-2002 Russell King + * Copyright (c) 2003 ARM Limited + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + + .type __switch_data, %object +__switch_data: + .long __mmap_switched + .long __data_loc @ r4 + .long __data_start @ r5 + .long __bss_start @ r6 + .long _end @ r7 + .long processor_id @ r4 + .long __machine_arch_type @ r5 + .long cr_alignment @ r6 + .long init_thread_union + THREAD_START_SP @ sp + +/* + * The following fragment of code is executed with the MMU on in MMU mode, + * and uses absolute addresses; this is not position independent. + * + * r0 = cp#15 control register + * r1 = machine ID + * r9 = processor ID + */ + .type __mmap_switched, %function +__mmap_switched: + adr r3, __switch_data + 4 + + ldmia r3!, {r4, r5, r6, r7} + cmp r4, r5 @ Copy data segment if needed +1: cmpne r5, r6 + ldrne fp, [r4], #4 + strne fp, [r5], #4 + bne 1b + + mov fp, #0 @ Clear BSS (and zero fp) +1: cmp r6, r7 + strcc fp, [r6],#4 + bcc 1b + + ldmia r3, {r4, r5, r6, sp} + str r9, [r4] @ Save processor ID + str r1, [r5] @ Save machine type + bic r4, r0, #CR_A @ Clear 'A' bit + stmia r6, {r0, r4} @ Save control register values + b start_kernel + +/* + * Exception handling. Something went wrong and we can't proceed. We + * ought to tell the user, but since we don't have any guarantee that + * we're even running on the right architecture, we do virtually nothing. + * + * If CONFIG_DEBUG_LL is set we try to print out something about the error + * and hope for the best (useful if bootloader fails to pass a proper + * machine ID for example). + */ + + .type __error_p, %function +__error_p: +#ifdef CONFIG_DEBUG_LL + adr r0, str_p1 + bl printascii + b __error +str_p1: .asciz "\nError: unrecognized/unsupported processor variant.\n" + .align +#endif + + .type __error_a, %function +__error_a: +#ifdef CONFIG_DEBUG_LL + mov r4, r1 @ preserve machine ID + adr r0, str_a1 + bl printascii + mov r0, r4 + bl printhex8 + adr r0, str_a2 + bl printascii + adr r3, 3f + ldmia r3, {r4, r5, r6} @ get machine desc list + sub r4, r3, r4 @ get offset between virt&phys + add r5, r5, r4 @ convert virt addresses to + add r6, r6, r4 @ physical address space +1: ldr r0, [r5, #MACHINFO_TYPE] @ get machine type + bl printhex8 + mov r0, #'\t' + bl printch + ldr r0, [r5, #MACHINFO_NAME] @ get machine name + add r0, r0, r4 + bl printascii + mov r0, #'\n' + bl printch + add r5, r5, #SIZEOF_MACHINE_DESC @ next machine_desc + cmp r5, r6 + blo 1b + adr r0, str_a3 + bl printascii + b __error +str_a1: .asciz "\nError: unrecognized/unsupported machine ID (r1 = 0x" +str_a2: .asciz ").\n\nAvailable machine support:\n\nID (hex)\tNAME\n" +str_a3: .asciz "\nPlease check your kernel config and/or bootloader.\n" + .align +#endif + + .type __error, %function +__error: +#ifdef CONFIG_ARCH_RPC +/* + * Turn the screen red on a error - RiscPC only. + */ + mov r0, #0x02000000 + mov r3, #0x11 + orr r3, r3, r3, lsl #8 + orr r3, r3, r3, lsl #16 + str r3, [r0], #4 + str r3, [r0], #4 + str r3, [r0], #4 + str r3, [r0], #4 +#endif +1: mov r0, r0 + b 1b + + +/* + * Read processor ID register (CP#15, CR0), and look up in the linker-built + * supported processor list. Note that we can't use the absolute addresses + * for the __proc_info lists since we aren't running with the MMU on + * (and therefore, we are not in the correct address space). We have to + * calculate the offset. + * + * r9 = cpuid + * Returns: + * r3, r4, r6 corrupted + * r5 = proc_info pointer in physical address space + * r9 = cpuid (preserved) + */ + .type __lookup_processor_type, %function +__lookup_processor_type: + adr r3, 3f + ldmda r3, {r5 - r7} + sub r3, r3, r7 @ get offset between virt&phys + add r5, r5, r3 @ convert virt addresses to + add r6, r6, r3 @ physical address space +1: ldmia r5, {r3, r4} @ value, mask + and r4, r4, r9 @ mask wanted bits + teq r3, r4 + beq 2f + add r5, r5, #PROC_INFO_SZ @ sizeof(proc_info_list) + cmp r5, r6 + blo 1b + mov r5, #0 @ unknown processor +2: mov pc, lr + +/* + * This provides a C-API version of the above function. + */ +ENTRY(lookup_processor_type) + stmfd sp!, {r4 - r7, r9, lr} + mov r9, r0 + bl __lookup_processor_type + mov r0, r5 + ldmfd sp!, {r4 - r7, r9, pc} + +/* + * Look in include/asm-arm/procinfo.h and arch/arm/kernel/arch.[ch] for + * more information about the __proc_info and __arch_info structures. + */ + .long __proc_info_begin + .long __proc_info_end +3: .long . + .long __arch_info_begin + .long __arch_info_end + +/* + * Lookup machine architecture in the linker-build list of architectures. + * Note that we can't use the absolute addresses for the __arch_info + * lists since we aren't running with the MMU on (and therefore, we are + * not in the correct address space). We have to calculate the offset. + * + * r1 = machine architecture number + * Returns: + * r3, r4, r6 corrupted + * r5 = mach_info pointer in physical address space + */ + .type __lookup_machine_type, %function +__lookup_machine_type: + adr r3, 3b + ldmia r3, {r4, r5, r6} + sub r3, r3, r4 @ get offset between virt&phys + add r5, r5, r3 @ convert virt addresses to + add r6, r6, r3 @ physical address space +1: ldr r3, [r5, #MACHINFO_TYPE] @ get machine type + teq r3, r1 @ matches loader number? + beq 2f @ found + add r5, r5, #SIZEOF_MACHINE_DESC @ next machine_desc + cmp r5, r6 + blo 1b + mov r5, #0 @ unknown machine +2: mov pc, lr + +/* + * This provides a C-API version of the above function. + */ +ENTRY(lookup_machine_type) + stmfd sp!, {r4 - r6, lr} + mov r1, r0 + bl __lookup_machine_type + mov r0, r5 + ldmfd sp!, {r4 - r6, pc} diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S new file mode 100644 index 000000000000..b093ab8738b5 --- /dev/null +++ b/arch/arm/kernel/head-nommu.S @@ -0,0 +1,83 @@ +/* + * linux/arch/arm/kernel/head-nommu.S + * + * Copyright (C) 1994-2002 Russell King + * Copyright (C) 2003-2006 Hyok S. Choi + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Common kernel startup code (non-paged MM) + * for 32-bit CPUs which has a process ID register(CP15). + * + */ +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#define PROCINFO_INITFUNC 12 + +/* + * Kernel startup entry point. + * --------------------------- + * + * This is normally called from the decompressor code. The requirements + * are: MMU = off, D-cache = off, I-cache = dont care, r0 = 0, + * r1 = machine nr. + * + * See linux/arch/arm/tools/mach-types for the complete list of machine + * numbers for r1. + * + */ + __INIT + .type stext, %function +ENTRY(stext) + msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | MODE_SVC @ ensure svc mode + @ and irqs disabled + mrc p15, 0, r9, c0, c0 @ get processor id + bl __lookup_processor_type @ r5=procinfo r9=cpuid + movs r10, r5 @ invalid processor (r5=0)? + beq __error_p @ yes, error 'p' + bl __lookup_machine_type @ r5=machinfo + movs r8, r5 @ invalid machine (r5=0)? + beq __error_a @ yes, error 'a' + + ldr r13, __switch_data @ address to jump to after + @ the initialization is done + adr lr, __after_proc_init @ return (PIC) address + add pc, r10, #PROCINFO_INITFUNC + +/* + * Set the Control Register and Read the process ID. + */ + .type __after_proc_init, %function +__after_proc_init: + mrc p15, 0, r0, c1, c0, 0 @ read control reg +#ifdef CONFIG_ALIGNMENT_TRAP + orr r0, r0, #CR_A +#else + bic r0, r0, #CR_A +#endif +#ifdef CONFIG_CPU_DCACHE_DISABLE + bic r0, r0, #CR_C +#endif +#ifdef CONFIG_CPU_BPREDICT_DISABLE + bic r0, r0, #CR_Z +#endif +#ifdef CONFIG_CPU_ICACHE_DISABLE + bic r0, r0, #CR_I +#endif + mcr p15, 0, r0, c1, c0, 0 @ write control reg + + mov pc, r13 @ clear the BSS and jump + @ to start_kernel + +#include "head-common.S" diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 571d6d584919..d848f3a38924 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -103,49 +103,6 @@ ENTRY(stext) adr lr, __enable_mmu @ return (PIC) address add pc, r10, #PROCINFO_INITFUNC - .type __switch_data, %object -__switch_data: - .long __mmap_switched - .long __data_loc @ r4 - .long __data_start @ r5 - .long __bss_start @ r6 - .long _end @ r7 - .long processor_id @ r4 - .long __machine_arch_type @ r5 - .long cr_alignment @ r6 - .long init_thread_union + THREAD_START_SP @ sp - -/* - * The following fragment of code is executed with the MMU on, and uses - * absolute addresses; this is not position independent. - * - * r0 = cp#15 control register - * r1 = machine ID - * r9 = processor ID - */ - .type __mmap_switched, %function -__mmap_switched: - adr r3, __switch_data + 4 - - ldmia r3!, {r4, r5, r6, r7} - cmp r4, r5 @ Copy data segment if needed -1: cmpne r5, r6 - ldrne fp, [r4], #4 - strne fp, [r5], #4 - bne 1b - - mov fp, #0 @ Clear BSS (and zero fp) -1: cmp r6, r7 - strcc fp, [r6],#4 - bcc 1b - - ldmia r3, {r4, r5, r6, sp} - str r9, [r4] @ Save processor ID - str r1, [r5] @ Save machine type - bic r4, r0, #CR_A @ Clear 'A' bit - stmia r6, {r0, r4} @ Save control register values - b start_kernel - #if defined(CONFIG_SMP) .type secondary_startup, #function ENTRY(secondary_startup) @@ -368,166 +325,4 @@ __create_page_tables: mov pc, lr .ltorg - - -/* - * Exception handling. Something went wrong and we can't proceed. We - * ought to tell the user, but since we don't have any guarantee that - * we're even running on the right architecture, we do virtually nothing. - * - * If CONFIG_DEBUG_LL is set we try to print out something about the error - * and hope for the best (useful if bootloader fails to pass a proper - * machine ID for example). - */ - - .type __error_p, %function -__error_p: -#ifdef CONFIG_DEBUG_LL - adr r0, str_p1 - bl printascii - b __error -str_p1: .asciz "\nError: unrecognized/unsupported processor variant.\n" - .align -#endif - - .type __error_a, %function -__error_a: -#ifdef CONFIG_DEBUG_LL - mov r4, r1 @ preserve machine ID - adr r0, str_a1 - bl printascii - mov r0, r4 - bl printhex8 - adr r0, str_a2 - bl printascii - adr r3, 3f - ldmia r3, {r4, r5, r6} @ get machine desc list - sub r4, r3, r4 @ get offset between virt&phys - add r5, r5, r4 @ convert virt addresses to - add r6, r6, r4 @ physical address space -1: ldr r0, [r5, #MACHINFO_TYPE] @ get machine type - bl printhex8 - mov r0, #'\t' - bl printch - ldr r0, [r5, #MACHINFO_NAME] @ get machine name - add r0, r0, r4 - bl printascii - mov r0, #'\n' - bl printch - add r5, r5, #SIZEOF_MACHINE_DESC @ next machine_desc - cmp r5, r6 - blo 1b - adr r0, str_a3 - bl printascii - b __error -str_a1: .asciz "\nError: unrecognized/unsupported machine ID (r1 = 0x" -str_a2: .asciz ").\n\nAvailable machine support:\n\nID (hex)\tNAME\n" -str_a3: .asciz "\nPlease check your kernel config and/or bootloader.\n" - .align -#endif - - .type __error, %function -__error: -#ifdef CONFIG_ARCH_RPC -/* - * Turn the screen red on a error - RiscPC only. - */ - mov r0, #0x02000000 - mov r3, #0x11 - orr r3, r3, r3, lsl #8 - orr r3, r3, r3, lsl #16 - str r3, [r0], #4 - str r3, [r0], #4 - str r3, [r0], #4 - str r3, [r0], #4 -#endif -1: mov r0, r0 - b 1b - - -/* - * Read processor ID register (CP#15, CR0), and look up in the linker-built - * supported processor list. Note that we can't use the absolute addresses - * for the __proc_info lists since we aren't running with the MMU on - * (and therefore, we are not in the correct address space). We have to - * calculate the offset. - * - * r9 = cpuid - * Returns: - * r3, r4, r6 corrupted - * r5 = proc_info pointer in physical address space - * r9 = cpuid (preserved) - */ - .type __lookup_processor_type, %function -__lookup_processor_type: - adr r3, 3f - ldmda r3, {r5 - r7} - sub r3, r3, r7 @ get offset between virt&phys - add r5, r5, r3 @ convert virt addresses to - add r6, r6, r3 @ physical address space -1: ldmia r5, {r3, r4} @ value, mask - and r4, r4, r9 @ mask wanted bits - teq r3, r4 - beq 2f - add r5, r5, #PROC_INFO_SZ @ sizeof(proc_info_list) - cmp r5, r6 - blo 1b - mov r5, #0 @ unknown processor -2: mov pc, lr - -/* - * This provides a C-API version of the above function. - */ -ENTRY(lookup_processor_type) - stmfd sp!, {r4 - r7, r9, lr} - mov r9, r0 - bl __lookup_processor_type - mov r0, r5 - ldmfd sp!, {r4 - r7, r9, pc} - -/* - * Look in include/asm-arm/procinfo.h and arch/arm/kernel/arch.[ch] for - * more information about the __proc_info and __arch_info structures. - */ - .long __proc_info_begin - .long __proc_info_end -3: .long . - .long __arch_info_begin - .long __arch_info_end - -/* - * Lookup machine architecture in the linker-build list of architectures. - * Note that we can't use the absolute addresses for the __arch_info - * lists since we aren't running with the MMU on (and therefore, we are - * not in the correct address space). We have to calculate the offset. - * - * r1 = machine architecture number - * Returns: - * r3, r4, r6 corrupted - * r5 = mach_info pointer in physical address space - */ - .type __lookup_machine_type, %function -__lookup_machine_type: - adr r3, 3b - ldmia r3, {r4, r5, r6} - sub r3, r3, r4 @ get offset between virt&phys - add r5, r5, r3 @ convert virt addresses to - add r6, r6, r3 @ physical address space -1: ldr r3, [r5, #MACHINFO_TYPE] @ get machine type - teq r3, r1 @ matches loader number? - beq 2f @ found - add r5, r5, #SIZEOF_MACHINE_DESC @ next machine_desc - cmp r5, r6 - blo 1b - mov r5, #0 @ unknown machine -2: mov pc, lr - -/* - * This provides a C-API version of the above function. - */ -ENTRY(lookup_machine_type) - stmfd sp!, {r4 - r6, lr} - mov r1, r0 - bl __lookup_machine_type - mov r0, r5 - ldmfd sp!, {r4 - r6, pc} +#include "head-common.S" -- cgit v1.2.2 From f8c07de6beac55c3273cbd679bfa67555ef14ef5 Mon Sep 17 00:00:00 2001 From: "Hyok S. Choi" Date: Mon, 27 Mar 2006 15:14:19 +0100 Subject: [ARM] nommu: add nommu specific Kconfig and MMUEXT variable in Makefile This patch adds Kconfig-nommu for noMMU specific configurations and MMUEXT variable into Makefile. Signed-off-by: Hyok S. Choi Signed-off-by: Russell King --- arch/arm/Kconfig-nommu | 27 +++++++++++++++++++++++++++ arch/arm/Makefile | 7 ++++++- 2 files changed, 33 insertions(+), 1 deletion(-) create mode 100644 arch/arm/Kconfig-nommu (limited to 'arch') diff --git a/arch/arm/Kconfig-nommu b/arch/arm/Kconfig-nommu new file mode 100644 index 000000000000..8ce56e5bd78f --- /dev/null +++ b/arch/arm/Kconfig-nommu @@ -0,0 +1,27 @@ +# +# Kconfig for uClinux(non-paged MM) depend configurations +# Hyok S. Choi +# + +config SET_MEM_PARAM + bool "Set flash/sdram size and base addr" + help + Say Y to manually set the base addresses and sizes. + otherwise, the default values are assigned. + +config DRAM_BASE + hex '(S)DRAM Base Address' if SET_MEM_PARAM + default 0x00800000 + +config DRAM_SIZE + hex '(S)DRAM SIZE' if SET_MEM_PARAM + default 0x00800000 + +config FLASH_MEM_BASE + hex 'FLASH Base Address' if SET_MEM_PARAM + default 0x00400000 + +config FLASH_SIZE + hex 'FLASH Size' if SET_MEM_PARAM + default 0x00400000 + diff --git a/arch/arm/Makefile b/arch/arm/Makefile index e3770ed87825..73df2297a5f3 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -17,6 +17,11 @@ GZFLAGS :=-9 # Select a platform tht is kept up-to-date KBUILD_DEFCONFIG := versatile_defconfig +# defines filename extension depending memory manement type. +ifeq ($(CONFIG_MMU),) +MMUEXT := -nommu +endif + ifeq ($(CONFIG_FRAME_POINTER),y) CFLAGS +=-fno-omit-frame-pointer -mapcs -mno-sched-prolog endif @@ -127,7 +132,7 @@ else MACHINE := endif -export TEXT_OFFSET GZFLAGS +export TEXT_OFFSET GZFLAGS MMUEXT # Do we have FASTFPE? FASTFPE :=arch/arm/fastfpe -- cgit v1.2.2 From c760fc1997e8156ebc4134c42c18f68137c689f9 Mon Sep 17 00:00:00 2001 From: "Hyok S. Choi" Date: Mon, 27 Mar 2006 15:18:50 +0100 Subject: [ARM] nommu: fixups for the exception vectors The high page vector (0xFFFF0000) does not supported in nommu mode. This patch allows the vectors to be 0x00000000 or the begining of DRAM in nommu mode. Signed-off-by: Hyok S. Choi Signed-off-by: Russell King --- arch/arm/Kconfig | 8 ++++++++ arch/arm/Kconfig-nommu | 17 +++++++++++++++++ arch/arm/kernel/signal.h | 2 +- arch/arm/kernel/traps.c | 9 +++++---- 4 files changed, 31 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 32ba00bd0a2f..b674614d090b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -72,6 +72,14 @@ config FIQ config ARCH_MTD_XIP bool +config VECTORS_BASE + hex + default 0xffff0000 if MMU + default DRAM_BASE if REMAP_VECTORS_TO_RAM + default 0x00000000 + help + The base address of exception vectors. + source "init/Kconfig" menu "System Type" diff --git a/arch/arm/Kconfig-nommu b/arch/arm/Kconfig-nommu index 8ce56e5bd78f..e1574be2ded6 100644 --- a/arch/arm/Kconfig-nommu +++ b/arch/arm/Kconfig-nommu @@ -25,3 +25,20 @@ config FLASH_SIZE hex 'FLASH Size' if SET_MEM_PARAM default 0x00400000 +config REMAP_VECTORS_TO_RAM + bool 'Install vectors to the begining of RAM' if DRAM_BASE + depends on DRAM_BASE + help + The kernel needs to change the hardware exception vectors. + In nommu mode, the hardware exception vectors are normally + placed at address 0x00000000. However, this region may be + occupied by read-only memory depending on H/W design. + + If the region contains read-write memory, say 'n' here. + + If your CPU provides a remap facility which allows the exception + vectors to be mapped to writable memory, say 'n' here. + + Otherwise, say 'y' here. In this case, the kernel will require + external support to redirect the hardware exception vectors to + the writable versions located at DRAM_BASE. diff --git a/arch/arm/kernel/signal.h b/arch/arm/kernel/signal.h index 9991049c522d..27beece15502 100644 --- a/arch/arm/kernel/signal.h +++ b/arch/arm/kernel/signal.h @@ -7,6 +7,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#define KERN_SIGRETURN_CODE 0xffff0500 +#define KERN_SIGRETURN_CODE (CONFIG_VECTORS_BASE + 0x00000500) extern const unsigned long sigreturn_codes[7]; diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 03924bcc6129..32b0570329e7 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -688,6 +688,7 @@ EXPORT_SYMBOL(abort); void __init trap_init(void) { + unsigned long vectors = CONFIG_VECTORS_BASE; extern char __stubs_start[], __stubs_end[]; extern char __vectors_start[], __vectors_end[]; extern char __kuser_helper_start[], __kuser_helper_end[]; @@ -698,9 +699,9 @@ void __init trap_init(void) * into the vector page, mapped at 0xffff0000, and ensure these * are visible to the instruction stream. */ - memcpy((void *)0xffff0000, __vectors_start, __vectors_end - __vectors_start); - memcpy((void *)0xffff0200, __stubs_start, __stubs_end - __stubs_start); - memcpy((void *)0xffff1000 - kuser_sz, __kuser_helper_start, kuser_sz); + memcpy((void *)vectors, __vectors_start, __vectors_end - __vectors_start); + memcpy((void *)vectors + 0x200, __stubs_start, __stubs_end - __stubs_start); + memcpy((void *)vectors + 0x1000 - kuser_sz, __kuser_helper_start, kuser_sz); /* * Copy signal return handlers into the vector page, and @@ -709,6 +710,6 @@ void __init trap_init(void) memcpy((void *)KERN_SIGRETURN_CODE, sigreturn_codes, sizeof(sigreturn_codes)); - flush_icache_range(0xffff0000, 0xffff0000 + PAGE_SIZE); + flush_icache_range(vectors, vectors + PAGE_SIZE); modify_domain(DOMAIN_USER, DOMAIN_CLIENT); } -- cgit v1.2.2 From 6896eec0296c400db95e4382095fd4d6cf59800c Mon Sep 17 00:00:00 2001 From: Paul Brook Date: Tue, 28 Mar 2006 22:19:29 +0100 Subject: [ARM] 3420/1: Missing clobber in example code Patch from Paul Brook The example code in the source documentation for __kernel_dmb clobbers r0 but doesn't list it the asm clobber list. Signed-off-by: Paul Brook Signed-off-by: Russell King --- arch/arm/kernel/entry-armv.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 355914ffb192..ab8e600c18c8 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -666,7 +666,7 @@ __kuser_helper_start: * * #define __kernel_dmb() \ * asm volatile ( "mov r0, #0xffff0fff; mov lr, pc; sub pc, r0, #95" \ - * : : : "lr","cc" ) + * : : : "r0", "lr","cc" ) */ __kuser_memory_barrier: @ 0xffff0fa0 -- cgit v1.2.2 From b48340aff031db98dbd34a4bbc575eec9bb78359 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Thu, 30 Mar 2006 10:24:07 +0100 Subject: [ARM] 3425/1: xsc3: need to include pgtable-hwdef.h Patch from Lennert Buytenhek Adapt xsc3 to the changes in 74945c8616a50074277e18641baaae7464006766 (xsc3 was written before but merged after the latter went in.) Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- arch/arm/mm/proc-xsc3.S | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index f90513e9af0c..b9dfce57c272 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include "proc-macros.S" -- cgit v1.2.2