From 5d910426a6e80194a50e33351c91abcad266c809 Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Wed, 5 Oct 2011 09:59:57 +0200 Subject: atmel_lcdfb: Adjust HFP calculation so it matches the manual. In the AT91SAM9263 Manual the HFP part in LCDTIM2 is described as follows: * HFP: Horizontal Front Porch Number of idle LCDDOTCK cycles at the end of the line. Idle period is (HFP+2) LCDDOTCK cycles. It is only a minor issue. I also changed all boards using atmel_lcdfb I found to respect the new calculation. Signed-off-by: Alexander Stein Signed-off-by: Florian Tobias Schandinat --- arch/arm/mach-at91/board-cap9adk.c | 2 +- arch/arm/mach-at91/board-neocore926.c | 2 +- arch/arm/mach-at91/board-sam9261ek.c | 4 ++-- arch/arm/mach-at91/board-sam9263ek.c | 2 +- arch/arm/mach-at91/board-sam9m10g45ek.c | 2 +- arch/arm/mach-at91/board-sam9rlek.c | 2 +- 6 files changed, 7 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c index 679b0b743e92..ae962bf7ca0d 100644 --- a/arch/arm/mach-at91/board-cap9adk.c +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -304,7 +304,7 @@ static struct fb_videomode at91_tft_vga_modes[] = { .xres = 240, .yres = 320, .pixclock = KHZ2PICOS(4965), - .left_margin = 1, .right_margin = 33, + .left_margin = 1, .right_margin = 34, .upper_margin = 1, .lower_margin = 0, .hsync_len = 5, .vsync_len = 1, diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index 9bc6ab32e0ac..583878ed9a6d 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -235,7 +235,7 @@ static struct fb_videomode at91_tft_vga_modes[] = { .xres = 240, .yres = 320, .pixclock = KHZ2PICOS(5000), - .left_margin = 1, .right_margin = 33, + .left_margin = 1, .right_margin = 34, .upper_margin = 1, .lower_margin = 0, .hsync_len = 5, .vsync_len = 1, diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 5096a0ec50c1..8dda83bd2791 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -370,7 +370,7 @@ static struct fb_videomode at91_stn_modes[] = { .xres = 320, .yres = 240, .pixclock = KHZ2PICOS(1440), - .left_margin = 1, .right_margin = 1, + .left_margin = 1, .right_margin = 2, .upper_margin = 0, .lower_margin = 0, .hsync_len = 1, .vsync_len = 1, @@ -431,7 +431,7 @@ static struct fb_videomode at91_tft_vga_modes[] = { .xres = 240, .yres = 320, .pixclock = KHZ2PICOS(4965), - .left_margin = 1, .right_margin = 33, + .left_margin = 1, .right_margin = 34, .upper_margin = 1, .lower_margin = 0, .hsync_len = 5, .vsync_len = 1, diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index ea8f185d3b9d..e26007004402 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -258,7 +258,7 @@ static struct fb_videomode at91_tft_vga_modes[] = { .xres = 240, .yres = 320, .pixclock = KHZ2PICOS(4965), - .left_margin = 1, .right_margin = 33, + .left_margin = 1, .right_margin = 34, .upper_margin = 1, .lower_margin = 0, .hsync_len = 5, .vsync_len = 1, diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index ad234ccbf57e..5e9a5ca54d4c 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -197,7 +197,7 @@ static struct fb_videomode at91_tft_vga_modes[] = { .xres = 480, .yres = 272, .pixclock = KHZ2PICOS(9000), - .left_margin = 1, .right_margin = 1, + .left_margin = 1, .right_margin = 2, .upper_margin = 40, .lower_margin = 1, .hsync_len = 45, .vsync_len = 1, diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index 4f14b54b93a8..ad9e5c93d876 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -154,7 +154,7 @@ static struct fb_videomode at91_tft_vga_modes[] = { .xres = 240, .yres = 320, .pixclock = KHZ2PICOS(4965), - .left_margin = 1, .right_margin = 33, + .left_margin = 1, .right_margin = 34, .upper_margin = 1, .lower_margin = 0, .hsync_len = 5, .vsync_len = 1, -- cgit v1.2.2 From 9250741e5feedb6a5273683a940b339af59a1086 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 8 Nov 2011 20:33:47 -0800 Subject: fbdev: sh_mipi_dsi: tidyup dsip_clk dsipck clock is controled by CLKDEV_ICK_ID() in clock-shxxx. dsi0p_clk/dsi1p_clk naming is not needed. Signed-off-by: Kuninori Morimoto Acked-by: Magnus Damm Signed-off-by: Florian Tobias Schandinat --- arch/arm/mach-shmobile/clock-sh7372.c | 4 ++-- arch/arm/mach-shmobile/clock-sh73a0.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index 995a9c3aec8f..1ebab171e4f7 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -612,8 +612,8 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("hdmi_clk", &div6_reparent_clks[DIV6_HDMI]), CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSIT]), CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]), - CLKDEV_ICK_ID("dsi0p_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]), - CLKDEV_ICK_ID("dsi1p_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]), + CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]), + CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]), /* MSTP32 clocks */ CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* IIC2 */ diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index 61a846bb30f2..3da30bac518e 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -319,8 +319,8 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("sdhi2_clk", &div6_clks[DIV6_SDHI2]), CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSIT]), CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]), - CLKDEV_ICK_ID("dsi0p_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]), - CLKDEV_ICK_ID("dsi1p_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]), + CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]), + CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]), /* MSTP32 clocks */ CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */ -- cgit v1.2.2 From 26c3d7ac219e74ab3939048a32d6bd3b4a16798a Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 8 Nov 2011 20:34:43 -0800 Subject: fbdev: sh_mipi_dsi: add lane control support SH MIPI DSI can use 0-4 lane Signed-off-by: Kuninori Morimoto Acked-by: Magnus Damm Signed-off-by: Florian Tobias Schandinat --- arch/arm/mach-shmobile/board-ag5evm.c | 1 + arch/arm/mach-shmobile/board-ap4evb.c | 1 + 2 files changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index b862e9f81e3e..e969fe91e505 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -324,6 +324,7 @@ static struct resource mipidsi0_resources[] = { static struct sh_mipi_dsi_info mipidsi0_info = { .data_format = MIPI_RGB888, .lcd_chan = &lcdc0_info.ch[0], + .lane = 2, .vsynw_offset = 20, .clksrc = 1, .flags = SH_MIPI_DSI_HSABM, diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 4c865ece9ac4..b7d006fd0461 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -580,6 +580,7 @@ static struct resource mipidsi0_resources[] = { static struct sh_mipi_dsi_info mipidsi0_info = { .data_format = MIPI_RGB888, .lcd_chan = &lcdc_info.ch[0], + .lane = 2, .vsynw_offset = 17, }; -- cgit v1.2.2 From f832906a56bcf9c597589e9a7898c1dd2f0513b9 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 8 Nov 2011 20:34:55 -0800 Subject: fbdev: sh_mipi_dsi: add sync_pulses/sync_events/burst mode Signed-off-by: Kuninori Morimoto Acked-by: Magnus Damm Signed-off-by: Florian Tobias Schandinat --- arch/arm/mach-shmobile/board-ag5evm.c | 3 ++- arch/arm/mach-shmobile/board-ap4evb.c | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index e969fe91e505..6993844424c6 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -327,7 +327,8 @@ static struct sh_mipi_dsi_info mipidsi0_info = { .lane = 2, .vsynw_offset = 20, .clksrc = 1, - .flags = SH_MIPI_DSI_HSABM, + .flags = SH_MIPI_DSI_HSABM | + SH_MIPI_DSI_SYNC_PULSES_MODE, }; static struct platform_device mipidsi0_device = { diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index b7d006fd0461..b2e32c8c9e54 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -582,6 +582,7 @@ static struct sh_mipi_dsi_info mipidsi0_info = { .lcd_chan = &lcdc_info.ch[0], .lane = 2, .vsynw_offset = 17, + .flags = SH_MIPI_DSI_SYNC_PULSES_MODE, }; static struct platform_device mipidsi0_device = { -- cgit v1.2.2 From 5e47431aabf716c9ad9eacf1a966e1fc1469c809 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 8 Nov 2011 20:35:14 -0800 Subject: fbdev: sh_mipi_dsi: add set_dot_clock() for each platform Dot clock of SH MIPI are depends on each platform board. This patch adds set_dot_clock() function for it. Signed-off-by: Kuninori Morimoto Acked-by: Magnus Damm Signed-off-by: Florian Tobias Schandinat --- arch/arm/mach-shmobile/board-ag5evm.c | 36 ++++++++++++++++++++++++++++++----- arch/arm/mach-shmobile/board-ap4evb.c | 25 ++++++++++++++++++++++++ 2 files changed, 56 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index 6993844424c6..15072c51e035 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -321,6 +321,36 @@ static struct resource mipidsi0_resources[] = { }, }; +#define DSI0PHYCR 0xe615006c +static int sh_mipi_set_dot_clock(struct platform_device *pdev, + void __iomem *base, + int enable) +{ + struct clk *pck; + int ret; + + pck = clk_get(&pdev->dev, "dsip_clk"); + if (IS_ERR(pck)) { + ret = PTR_ERR(pck); + goto sh_mipi_set_dot_clock_pck_err; + } + + if (enable) { + clk_set_rate(pck, clk_round_rate(pck, 24000000)); + __raw_writel(0x2a809010, DSI0PHYCR); + clk_enable(pck); + } else { + clk_disable(pck); + } + + ret = 0; + + clk_put(pck); + +sh_mipi_set_dot_clock_pck_err: + return ret; +} + static struct sh_mipi_dsi_info mipidsi0_info = { .data_format = MIPI_RGB888, .lcd_chan = &lcdc0_info.ch[0], @@ -329,6 +359,7 @@ static struct sh_mipi_dsi_info mipidsi0_info = { .clksrc = 1, .flags = SH_MIPI_DSI_HSABM | SH_MIPI_DSI_SYNC_PULSES_MODE, + .set_dot_clock = sh_mipi_set_dot_clock, }; static struct platform_device mipidsi0_device = { @@ -476,8 +507,6 @@ static void __init ag5evm_map_io(void) shmobile_setup_console(); } -#define DSI0PHYCR 0xe615006c - static void __init ag5evm_init(void) { sh73a0_pinmux_init(); @@ -558,9 +587,6 @@ static void __init ag5evm_init(void) gpio_direction_output(GPIO_PORT235, 0); lcd_backlight_reset(); - /* MIPI-DSI clock setup */ - __raw_writel(0x2a809010, DSI0PHYCR); - /* enable SDHI0 on CN15 [SD I/F] */ gpio_request(GPIO_FN_SDHICD0, NULL); gpio_request(GPIO_FN_SDHIWP0, NULL); diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index b2e32c8c9e54..73503ed8bde2 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -564,6 +564,30 @@ static struct platform_device keysc_device = { }; /* MIPI-DSI */ +#define PHYCTRL 0x0070 +static int sh_mipi_set_dot_clock(struct platform_device *pdev, + void __iomem *base, + int enable) +{ + struct clk *pck = clk_get(&pdev->dev, "dsip_clk"); + void __iomem *phy = base + PHYCTRL; + + if (IS_ERR(pck)) + return PTR_ERR(pck); + + if (enable) { + clk_set_rate(pck, clk_round_rate(pck, 24000000)); + iowrite32(ioread32(phy) | (0xb << 8), phy); + clk_enable(pck); + } else { + clk_disable(pck); + } + + clk_put(pck); + + return 0; +} + static struct resource mipidsi0_resources[] = { [0] = { .start = 0xffc60000, @@ -583,6 +607,7 @@ static struct sh_mipi_dsi_info mipidsi0_info = { .lane = 2, .vsynw_offset = 17, .flags = SH_MIPI_DSI_SYNC_PULSES_MODE, + .set_dot_clock = sh_mipi_set_dot_clock, }; static struct platform_device mipidsi0_device = { -- cgit v1.2.2 From a2e6297153f8fc7185d119c59d8eed1ee7d4c74f Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 8 Nov 2011 20:35:27 -0800 Subject: fbdev: sh_mipi_dsi: add HSxxCLK support SH MIPI manual explains the calculation method of HBP/HFP. it is based on HSbyteCLK settings. SH73a0 chip can use HS6divCLK/HS4divCLK for it. This patch has compatibility to SH7372 mipi Signed-off-by: Kuninori Morimoto Acked-by: Magnus Damm Signed-off-by: Florian Tobias Schandinat --- arch/arm/mach-shmobile/board-ag5evm.c | 5 +++-- arch/arm/mach-shmobile/board-ap4evb.c | 3 ++- 2 files changed, 5 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index 15072c51e035..7e3dd7326827 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -357,8 +357,9 @@ static struct sh_mipi_dsi_info mipidsi0_info = { .lane = 2, .vsynw_offset = 20, .clksrc = 1, - .flags = SH_MIPI_DSI_HSABM | - SH_MIPI_DSI_SYNC_PULSES_MODE, + .flags = SH_MIPI_DSI_HSABM | + SH_MIPI_DSI_SYNC_PULSES_MODE | + SH_MIPI_DSI_HSbyteCLK, .set_dot_clock = sh_mipi_set_dot_clock, }; diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 73503ed8bde2..904b608d1aa3 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -606,7 +606,8 @@ static struct sh_mipi_dsi_info mipidsi0_info = { .lcd_chan = &lcdc_info.ch[0], .lane = 2, .vsynw_offset = 17, - .flags = SH_MIPI_DSI_SYNC_PULSES_MODE, + .flags = SH_MIPI_DSI_SYNC_PULSES_MODE | + SH_MIPI_DSI_HSbyteCLK, .set_dot_clock = sh_mipi_set_dot_clock, }; -- cgit v1.2.2 From edd153a3e4f7346551f98014b3ccf0494219a9d1 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 13 Dec 2011 14:02:28 +0100 Subject: fbdev: sh_mobile_lcdc: Support FOURCC-based format API Signed-off-by: Laurent Pinchart Signed-off-by: Florian Tobias Schandinat --- arch/arm/mach-shmobile/board-ag5evm.c | 2 +- arch/arm/mach-shmobile/board-ap4evb.c | 4 ++-- arch/arm/mach-shmobile/board-mackerel.c | 4 ++-- arch/sh/boards/mach-ap325rxa/setup.c | 2 +- arch/sh/boards/mach-ecovec24/setup.c | 2 +- arch/sh/boards/mach-kfr2r09/setup.c | 2 +- arch/sh/boards/mach-migor/setup.c | 4 ++-- arch/sh/boards/mach-se/7724/setup.c | 2 +- 8 files changed, 11 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index 7e3dd7326827..80319f214765 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -271,7 +271,7 @@ static struct sh_mobile_lcdc_info lcdc0_info = { .flags = LCDC_FLAGS_DWPOL, .lcd_size_cfg.width = 44, .lcd_size_cfg.height = 79, - .bpp = 16, + .fourcc = V4L2_PIX_FMT_RGB565, .lcd_cfg = lcdc0_modes, .num_cfg = ARRAY_SIZE(lcdc0_modes), .board_cfg = { diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 904b608d1aa3..42b4dda57a79 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -491,7 +491,7 @@ static struct sh_mobile_lcdc_info lcdc_info = { .meram_dev = &meram_info, .ch[0] = { .chan = LCDC_CHAN_MAINLCD, - .bpp = 16, + .fourcc = V4L2_PIX_FMT_RGB565, .lcd_cfg = ap4evb_lcdc_modes, .num_cfg = ARRAY_SIZE(ap4evb_lcdc_modes), .meram_cfg = &lcd_meram_cfg, @@ -813,7 +813,7 @@ static struct sh_mobile_lcdc_info sh_mobile_lcdc1_info = { .meram_dev = &meram_info, .ch[0] = { .chan = LCDC_CHAN_MAINLCD, - .bpp = 16, + .fourcc = V4L2_PIX_FMT_RGB565, .interface_type = RGB24, .clock_divider = 1, .flags = LCDC_FLAGS_DWPOL, diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 9c5e598e0e3d..7db6a1712af5 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -388,7 +388,7 @@ static struct sh_mobile_lcdc_info lcdc_info = { .clock_source = LCDC_CLK_BUS, .ch[0] = { .chan = LCDC_CHAN_MAINLCD, - .bpp = 16, + .fourcc = V4L2_PIX_FMT_RGB565, .lcd_cfg = mackerel_lcdc_modes, .num_cfg = ARRAY_SIZE(mackerel_lcdc_modes), .interface_type = RGB24, @@ -451,7 +451,7 @@ static struct sh_mobile_lcdc_info hdmi_lcdc_info = { .clock_source = LCDC_CLK_EXTERNAL, .ch[0] = { .chan = LCDC_CHAN_MAINLCD, - .bpp = 16, + .fourcc = V4L2_PIX_FMT_RGB565, .interface_type = RGB24, .clock_divider = 1, .flags = LCDC_FLAGS_DWPOL, diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c index 7030f4c8cf11..7977911e72cf 100644 --- a/arch/sh/boards/mach-ap325rxa/setup.c +++ b/arch/sh/boards/mach-ap325rxa/setup.c @@ -207,7 +207,7 @@ static struct sh_mobile_lcdc_info lcdc_info = { .clock_source = LCDC_CLK_EXTERNAL, .ch[0] = { .chan = LCDC_CHAN_MAINLCD, - .bpp = 16, + .fourcc = V4L2_PIX_FMT_RGB565, .interface_type = RGB18, .clock_divider = 1, .lcd_cfg = ap325rxa_lcdc_modes, diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 92ddce4b3456..1d4a706ed6ef 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -330,7 +330,7 @@ static struct sh_mobile_lcdc_info lcdc_info = { .ch[0] = { .interface_type = RGB18, .chan = LCDC_CHAN_MAINLCD, - .bpp = 16, + .fourcc = V4L2_PIX_FMT_RGB565, .lcd_size_cfg = { /* 7.0 inch */ .width = 152, .height = 91, diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c index f65271a8d075..208c9b040263 100644 --- a/arch/sh/boards/mach-kfr2r09/setup.c +++ b/arch/sh/boards/mach-kfr2r09/setup.c @@ -146,7 +146,7 @@ static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = { .clock_source = LCDC_CLK_BUS, .ch[0] = { .chan = LCDC_CHAN_MAINLCD, - .bpp = 16, + .fourcc = V4L2_PIX_FMT_RGB565, .interface_type = SYS18, .clock_divider = 6, .flags = LCDC_FLAGS_DWPOL, diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c index e4c81195929c..ccf61fb99853 100644 --- a/arch/sh/boards/mach-migor/setup.c +++ b/arch/sh/boards/mach-migor/setup.c @@ -244,7 +244,7 @@ static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = { .clock_source = LCDC_CLK_BUS, .ch[0] = { .chan = LCDC_CHAN_MAINLCD, - .bpp = 16, + .fourcc = V4L2_PIX_FMT_RGB565, .interface_type = RGB16, .clock_divider = 2, .lcd_cfg = migor_lcd_modes, @@ -258,7 +258,7 @@ static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = { .clock_source = LCDC_CLK_PERIPHERAL, .ch[0] = { .chan = LCDC_CHAN_MAINLCD, - .bpp = 16, + .fourcc = V4L2_PIX_FMT_RGB565, .interface_type = SYS16A, .clock_divider = 10, .lcd_cfg = migor_lcd_modes, diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index b747c0ab9264..3aab70cd39e3 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -179,7 +179,7 @@ static struct sh_mobile_lcdc_info lcdc_info = { .clock_source = LCDC_CLK_EXTERNAL, .ch[0] = { .chan = LCDC_CHAN_MAINLCD, - .bpp = 16, + .fourcc = V4L2_PIX_FMT_RGB565, .clock_divider = 1, .lcd_size_cfg = { /* 7.0 inch */ .width = 152, -- cgit v1.2.2 From ee9dfd82ff1317ac5c0147fe21508ad6d7df4cff Mon Sep 17 00:00:00 2001 From: Mythri P K Date: Mon, 2 Jan 2012 14:02:37 +0530 Subject: OMAPDSS: HDMI: Move duplicate code from boardfile Move duplicate HDMI mux_init code from omap4 and panda board file to display file. Signed-off-by: Mythri P K Signed-off-by: Tomi Valkeinen --- arch/arm/mach-omap2/board-4430sdp.c | 16 +--------------- arch/arm/mach-omap2/board-omap4panda.c | 17 +---------------- arch/arm/mach-omap2/display.c | 23 +++++++++++++++++++++++ 3 files changed, 25 insertions(+), 31 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 515646886b59..312b158240ed 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -595,20 +595,6 @@ static void __init omap_sfh7741prox_init(void) __func__, OMAP4_SFH7741_ENABLE_GPIO, error); } -static void sdp4430_hdmi_mux_init(void) -{ - /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */ - omap_mux_init_signal("hdmi_hpd", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("hdmi_cec", - OMAP_PIN_INPUT_PULLUP); - /* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */ - omap_mux_init_signal("hdmi_ddc_scl", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("hdmi_ddc_sda", - OMAP_PIN_INPUT_PULLUP); -} - static struct gpio sdp4430_hdmi_gpios[] = { { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" }, { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, @@ -826,9 +812,9 @@ static void omap_4430sdp_display_init(void) pr_err("%s: Could not get display_sel GPIO\n", __func__); sdp4430_lcd_init(); - sdp4430_hdmi_mux_init(); sdp4430_picodlp_init(); omap_display_init(&sdp4430_dss_data); + omap_hdmi_init(); } #ifdef CONFIG_OMAP_MUX diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index a8c2c4263e38..9cc41ce29dab 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -478,21 +478,6 @@ int __init omap4_panda_dvi_init(void) return r; } - -static void omap4_panda_hdmi_mux_init(void) -{ - /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */ - omap_mux_init_signal("hdmi_hpd", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("hdmi_cec", - OMAP_PIN_INPUT_PULLUP); - /* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */ - omap_mux_init_signal("hdmi_ddc_scl", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("hdmi_ddc_sda", - OMAP_PIN_INPUT_PULLUP); -} - static struct gpio panda_hdmi_gpios[] = { { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" }, { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, @@ -544,8 +529,8 @@ void omap4_panda_display_init(void) if (r) pr_err("error initializing panda DVI\n"); - omap4_panda_hdmi_mux_init(); omap_display_init(&omap4_panda_dss_data); + omap_hdmi_init(); } static void __init omap4_panda_init(void) diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index dce9905d64bb..8436088ffe13 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -29,6 +29,7 @@ #include #include +#include "mux.h" #include "control.h" #include "display.h" @@ -96,6 +97,20 @@ static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initdata = { { "dss_hdmi", "omapdss_hdmi", -1 }, }; +static void omap4_hdmi_mux_pads() +{ + /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */ + omap_mux_init_signal("hdmi_hpd", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("hdmi_cec", + OMAP_PIN_INPUT_PULLUP); + /* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */ + omap_mux_init_signal("hdmi_ddc_scl", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("hdmi_ddc_sda", + OMAP_PIN_INPUT_PULLUP); +} + static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes) { u32 enable_mask, enable_shift; @@ -129,6 +144,14 @@ static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes) return 0; } +int omap_hdmi_init(void) +{ + if (cpu_is_omap44xx()) + omap4_hdmi_mux_pads(); + + return 0; +} + static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask) { if (cpu_is_omap44xx()) -- cgit v1.2.2 From 9a9016832d2601a290db4dce6dd55552bdae5b1a Mon Sep 17 00:00:00 2001 From: Mythri P K Date: Mon, 2 Jan 2012 14:02:38 +0530 Subject: OMAPDSS: HDMI: Disable DDC internal pull up Disables the internal pull resistor for SDA and SCL which are enabled by default, as there are external pull up's in 4460 and 4430 ES2.3 SDP, Blaze and Panda Boards, It is done to avoid the EDID read failure. Signed-off-by: Ricardo Salveti de Araujo Signed-off-by: Mythri P K Signed-off-by: Tomi Valkeinen --- arch/arm/mach-omap2/board-4430sdp.c | 9 ++++++++- arch/arm/mach-omap2/board-omap4panda.c | 10 +++++++++- arch/arm/mach-omap2/display.c | 22 +++++++++++++++++++--- 3 files changed, 36 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 312b158240ed..e1fe304ce361 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -814,7 +814,14 @@ static void omap_4430sdp_display_init(void) sdp4430_lcd_init(); sdp4430_picodlp_init(); omap_display_init(&sdp4430_dss_data); - omap_hdmi_init(); + /* + * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and + * later have external pull up on the HDMI I2C lines + */ + if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2) + omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); + else + omap_hdmi_init(0); } #ifdef CONFIG_OMAP_MUX diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 9cc41ce29dab..3e1c507fb01f 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -530,7 +530,15 @@ void omap4_panda_display_init(void) pr_err("error initializing panda DVI\n"); omap_display_init(&omap4_panda_dss_data); - omap_hdmi_init(); + + /* + * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and + * later have external pull up on the HDMI I2C lines + */ + if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2) + omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); + else + omap_hdmi_init(0); } static void __init omap4_panda_init(void) diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 8436088ffe13..ffd9bd983023 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -97,8 +97,11 @@ static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initdata = { { "dss_hdmi", "omapdss_hdmi", -1 }, }; -static void omap4_hdmi_mux_pads() +static void omap4_hdmi_mux_pads(enum omap_hdmi_flags flags) { + u32 reg; + u16 control_i2c_1; + /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */ omap_mux_init_signal("hdmi_hpd", OMAP_PIN_INPUT_PULLUP); @@ -109,6 +112,19 @@ static void omap4_hdmi_mux_pads() OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("hdmi_ddc_sda", OMAP_PIN_INPUT_PULLUP); + + /* + * CONTROL_I2C_1: HDMI_DDC_SDA_PULLUPRESX (bit 28) and + * HDMI_DDC_SCL_PULLUPRESX (bit 24) are set to disable + * internal pull up resistor. + */ + if (flags & OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP) { + control_i2c_1 = OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_1; + reg = omap4_ctrl_pad_readl(control_i2c_1); + reg |= (OMAP4_HDMI_DDC_SDA_PULLUPRESX_MASK | + OMAP4_HDMI_DDC_SCL_PULLUPRESX_MASK); + omap4_ctrl_pad_writel(reg, control_i2c_1); + } } static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes) @@ -144,10 +160,10 @@ static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes) return 0; } -int omap_hdmi_init(void) +int omap_hdmi_init(enum omap_hdmi_flags flags) { if (cpu_is_omap44xx()) - omap4_hdmi_mux_pads(); + omap4_hdmi_mux_pads(flags); return 0; } -- cgit v1.2.2 From 6b3cbe4094e3eddc9f38b34118c10aeea845eaf2 Mon Sep 17 00:00:00 2001 From: Florian Tobias Schandinat Date: Wed, 11 Jan 2012 22:26:59 +0000 Subject: Revert "atmel_lcdfb: Adjust HFP calculation so it matches the manual." This reverts commit 5d910426a6e80194a50e33351c91abcad266c809. Nicolas Ferre wrote: "Unfortunately this is not true for all the SoC that embed the atmel_lcdfb... So I may need to rework this patch but it is certainly not applicable in the current form." Signed-off-by: Florian Tobias Schandinat --- arch/arm/mach-at91/board-cap9adk.c | 2 +- arch/arm/mach-at91/board-neocore926.c | 2 +- arch/arm/mach-at91/board-sam9261ek.c | 4 ++-- arch/arm/mach-at91/board-sam9263ek.c | 2 +- arch/arm/mach-at91/board-sam9m10g45ek.c | 2 +- arch/arm/mach-at91/board-sam9rlek.c | 2 +- 6 files changed, 7 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c index 911d9862e6ff..5dffd3be62d2 100644 --- a/arch/arm/mach-at91/board-cap9adk.c +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -299,7 +299,7 @@ static struct fb_videomode at91_tft_vga_modes[] = { .xres = 240, .yres = 320, .pixclock = KHZ2PICOS(4965), - .left_margin = 1, .right_margin = 34, + .left_margin = 1, .right_margin = 33, .upper_margin = 1, .lower_margin = 0, .hsync_len = 5, .vsync_len = 1, diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index 190dc19ce467..ef816c17dc61 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -230,7 +230,7 @@ static struct fb_videomode at91_tft_vga_modes[] = { .xres = 240, .yres = 320, .pixclock = KHZ2PICOS(5000), - .left_margin = 1, .right_margin = 34, + .left_margin = 1, .right_margin = 33, .upper_margin = 1, .lower_margin = 0, .hsync_len = 5, .vsync_len = 1, diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 4f469ea46969..b005b738e8ff 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -365,7 +365,7 @@ static struct fb_videomode at91_stn_modes[] = { .xres = 320, .yres = 240, .pixclock = KHZ2PICOS(1440), - .left_margin = 1, .right_margin = 2, + .left_margin = 1, .right_margin = 1, .upper_margin = 0, .lower_margin = 0, .hsync_len = 1, .vsync_len = 1, @@ -426,7 +426,7 @@ static struct fb_videomode at91_tft_vga_modes[] = { .xres = 240, .yres = 320, .pixclock = KHZ2PICOS(4965), - .left_margin = 1, .right_margin = 34, + .left_margin = 1, .right_margin = 33, .upper_margin = 1, .lower_margin = 0, .hsync_len = 5, .vsync_len = 1, diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 0e96ee9e4ad3..bccdcf23caa1 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -253,7 +253,7 @@ static struct fb_videomode at91_tft_vga_modes[] = { .xres = 240, .yres = 320, .pixclock = KHZ2PICOS(4965), - .left_margin = 1, .right_margin = 34, + .left_margin = 1, .right_margin = 33, .upper_margin = 1, .lower_margin = 0, .hsync_len = 5, .vsync_len = 1, diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index 855c68b378d6..92de9127923a 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -192,7 +192,7 @@ static struct fb_videomode at91_tft_vga_modes[] = { .xres = 480, .yres = 272, .pixclock = KHZ2PICOS(9000), - .left_margin = 1, .right_margin = 2, + .left_margin = 1, .right_margin = 1, .upper_margin = 40, .lower_margin = 1, .hsync_len = 45, .vsync_len = 1, diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index 0e943a2d9502..b2b748239f36 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -149,7 +149,7 @@ static struct fb_videomode at91_tft_vga_modes[] = { .xres = 240, .yres = 320, .pixclock = KHZ2PICOS(4965), - .left_margin = 1, .right_margin = 34, + .left_margin = 1, .right_margin = 33, .upper_margin = 1, .lower_margin = 0, .hsync_len = 5, .vsync_len = 1, -- cgit v1.2.2