From 099f53cb50e45ef617a9f1d63ceec799e489418b Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 8 Apr 2009 14:28:37 -0700 Subject: async_tx: rename zero_sum to val 'zero_sum' does not properly describe the operation of generating parity and checking that it validates against an existing buffer. Change the name of the operation to 'val' (for 'validate'). This is in anticipation of the p+q case where it is a requirement to identify the target parity buffers separately from the source buffers, because the target parity buffers will not have corresponding pq coefficients. Reviewed-by: Andre Noll Acked-by: Maciej Sosnowski Signed-off-by: Dan Williams --- arch/arm/mach-iop13xx/setup.c | 8 ++++---- arch/arm/plat-iop/adma.c | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c index cfd4d2e6dacd..9800228b71d3 100644 --- a/arch/arm/mach-iop13xx/setup.c +++ b/arch/arm/mach-iop13xx/setup.c @@ -478,7 +478,7 @@ void __init iop13xx_platform_init(void) dma_cap_set(DMA_MEMCPY, plat_data->cap_mask); dma_cap_set(DMA_XOR, plat_data->cap_mask); dma_cap_set(DMA_DUAL_XOR, plat_data->cap_mask); - dma_cap_set(DMA_ZERO_SUM, plat_data->cap_mask); + dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask); dma_cap_set(DMA_MEMSET, plat_data->cap_mask); dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask); dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask); @@ -490,7 +490,7 @@ void __init iop13xx_platform_init(void) dma_cap_set(DMA_MEMCPY, plat_data->cap_mask); dma_cap_set(DMA_XOR, plat_data->cap_mask); dma_cap_set(DMA_DUAL_XOR, plat_data->cap_mask); - dma_cap_set(DMA_ZERO_SUM, plat_data->cap_mask); + dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask); dma_cap_set(DMA_MEMSET, plat_data->cap_mask); dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask); dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask); @@ -502,13 +502,13 @@ void __init iop13xx_platform_init(void) dma_cap_set(DMA_MEMCPY, plat_data->cap_mask); dma_cap_set(DMA_XOR, plat_data->cap_mask); dma_cap_set(DMA_DUAL_XOR, plat_data->cap_mask); - dma_cap_set(DMA_ZERO_SUM, plat_data->cap_mask); + dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask); dma_cap_set(DMA_MEMSET, plat_data->cap_mask); dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask); dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask); dma_cap_set(DMA_PQ_XOR, plat_data->cap_mask); dma_cap_set(DMA_PQ_UPDATE, plat_data->cap_mask); - dma_cap_set(DMA_PQ_ZERO_SUM, plat_data->cap_mask); + dma_cap_set(DMA_PQ_VAL, plat_data->cap_mask); break; } } diff --git a/arch/arm/plat-iop/adma.c b/arch/arm/plat-iop/adma.c index f72420821619..c0400440e21c 100644 --- a/arch/arm/plat-iop/adma.c +++ b/arch/arm/plat-iop/adma.c @@ -198,7 +198,7 @@ static int __init iop3xx_adma_cap_init(void) dma_cap_set(DMA_INTERRUPT, iop3xx_aau_data.cap_mask); #else dma_cap_set(DMA_XOR, iop3xx_aau_data.cap_mask); - dma_cap_set(DMA_ZERO_SUM, iop3xx_aau_data.cap_mask); + dma_cap_set(DMA_XOR_VAL, iop3xx_aau_data.cap_mask); dma_cap_set(DMA_MEMSET, iop3xx_aau_data.cap_mask); dma_cap_set(DMA_INTERRUPT, iop3xx_aau_data.cap_mask); #endif -- cgit v1.2.2 From ad283ea4a3ce82cda2efe33163748a397b31b1eb Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sat, 29 Aug 2009 19:09:26 -0700 Subject: async_tx: add sum check flags Replace the flat zero_sum_result with a collection of flags to contain the P (xor) zero-sum result, and the soon to be utilized Q (raid6 reed solomon syndrome) zero-sum result. Use the SUM_CHECK_ namespace instead of DMA_ since these flags will be used on non-dma-zero-sum enabled platforms. Reviewed-by: Andre Noll Acked-by: Maciej Sosnowski Signed-off-by: Dan Williams --- arch/arm/include/asm/hardware/iop3xx-adma.h | 5 +++-- arch/arm/mach-iop13xx/include/mach/adma.h | 12 +++++++----- 2 files changed, 10 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/hardware/iop3xx-adma.h b/arch/arm/include/asm/hardware/iop3xx-adma.h index 83e6ba338e2c..26eefea02314 100644 --- a/arch/arm/include/asm/hardware/iop3xx-adma.h +++ b/arch/arm/include/asm/hardware/iop3xx-adma.h @@ -756,13 +756,14 @@ static inline void iop_desc_set_block_fill_val(struct iop_adma_desc_slot *desc, hw_desc->src[0] = val; } -static inline int iop_desc_get_zero_result(struct iop_adma_desc_slot *desc) +static inline enum sum_check_flags +iop_desc_get_zero_result(struct iop_adma_desc_slot *desc) { struct iop3xx_desc_aau *hw_desc = desc->hw_desc; struct iop3xx_aau_desc_ctrl desc_ctrl = hw_desc->desc_ctrl_field; iop_paranoia(!(desc_ctrl.tx_complete && desc_ctrl.zero_result_en)); - return desc_ctrl.zero_result_err; + return desc_ctrl.zero_result_err << SUM_CHECK_P; } static inline void iop_chan_append(struct iop_adma_chan *chan) diff --git a/arch/arm/mach-iop13xx/include/mach/adma.h b/arch/arm/mach-iop13xx/include/mach/adma.h index 5722e86f2174..1cd31df8924d 100644 --- a/arch/arm/mach-iop13xx/include/mach/adma.h +++ b/arch/arm/mach-iop13xx/include/mach/adma.h @@ -428,18 +428,20 @@ static inline void iop_desc_set_block_fill_val(struct iop_adma_desc_slot *desc, hw_desc->block_fill_data = val; } -static inline int iop_desc_get_zero_result(struct iop_adma_desc_slot *desc) +static inline enum sum_check_flags +iop_desc_get_zero_result(struct iop_adma_desc_slot *desc) { struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc; struct iop13xx_adma_desc_ctrl desc_ctrl = hw_desc->desc_ctrl_field; struct iop13xx_adma_byte_count byte_count = hw_desc->byte_count_field; + enum sum_check_flags flags; BUG_ON(!(byte_count.tx_complete && desc_ctrl.zero_result)); - if (desc_ctrl.pq_xfer_en) - return byte_count.zero_result_err_q; - else - return byte_count.zero_result_err; + flags = byte_count.zero_result_err_q << SUM_CHECK_Q; + flags |= byte_count.zero_result_err << SUM_CHECK_P; + + return flags; } static inline void iop_chan_append(struct iop_adma_chan *chan) -- cgit v1.2.2 From b2f46fd8ef3dff2ab30f31126833f78b7480283a Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 14 Jul 2009 12:20:36 -0700 Subject: async_tx: add support for asynchronous GF multiplication [ Based on an original patch by Yuri Tikhonov ] This adds support for doing asynchronous GF multiplication by adding two additional functions to the async_tx API: async_gen_syndrome() does simultaneous XOR and Galois field multiplication of sources. async_syndrome_val() validates the given source buffers against known P and Q values. When a request is made to run async_pq against more than the hardware maximum number of supported sources we need to reuse the previous generated P and Q values as sources into the next operation. Care must be taken to remove Q from P' and P from Q'. For example to perform a 5 source pq op with hardware that only supports 4 sources at a time the following approach is taken: p, q = PQ(src0, src1, src2, src3, COEF({01}, {02}, {04}, {08})) p', q' = PQ(p, q, q, src4, COEF({00}, {01}, {00}, {10})) p' = p + q + q + src4 = p + src4 q' = {00}*p + {01}*q + {00}*q + {10}*src4 = q + {10}*src4 Note: 4 is the minimum acceptable maxpq otherwise we punt to synchronous-software path. The DMA_PREP_CONTINUE flag indicates to the driver to reuse p and q as sources (in the above manner) and fill the remaining slots up to maxpq with the new sources/coefficients. Note1: Some devices have native support for P+Q continuation and can skip this extra work. Devices with this capability can advertise it with dma_set_maxpq. It is up to each driver how to handle the DMA_PREP_CONTINUE flag. Note2: The api supports disabling the generation of P when generating Q, this is ignored by the synchronous path but is implemented by some dma devices to save unnecessary writes. In this case the continuation algorithm is simplified to only reuse Q as a source. Cc: H. Peter Anvin Cc: David Woodhouse Signed-off-by: Yuri Tikhonov Signed-off-by: Ilya Yanok Reviewed-by: Andre Noll Acked-by: Maciej Sosnowski Signed-off-by: Dan Williams --- arch/arm/mach-iop13xx/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c index 9800228b71d3..2e7ca0d75f8a 100644 --- a/arch/arm/mach-iop13xx/setup.c +++ b/arch/arm/mach-iop13xx/setup.c @@ -506,7 +506,7 @@ void __init iop13xx_platform_init(void) dma_cap_set(DMA_MEMSET, plat_data->cap_mask); dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask); dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask); - dma_cap_set(DMA_PQ_XOR, plat_data->cap_mask); + dma_cap_set(DMA_PQ, plat_data->cap_mask); dma_cap_set(DMA_PQ_UPDATE, plat_data->cap_mask); dma_cap_set(DMA_PQ_VAL, plat_data->cap_mask); break; -- cgit v1.2.2 From 7bf649aee8ac93ecc280f8745dcf8ec19d7b9fb1 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 28 Aug 2009 14:32:04 -0700 Subject: iop-adma: P+Q support for iop13xx adma engines iop33x support is not included because that engine is a bit more awkward to handle in that it can either be in xor mode or pq mode. The dmaengine/async_tx layers currently only comprehend static capabilities. Note iop13xx does not support hardware PQ continuation so the driver must handle the DMA_PREP_CONTINUE flag for operations across > 16 sources. From the comment for dma_maxpq: /* When an engine does not support native continuation we need 3 extra * source slots to reuse P and Q with the following coefficients: * 1/ {00} * P : remove P from Q', but use it as a source for P' * 2/ {01} * Q : use Q to continue Q' calculation * 3/ {00} * Q : subtract Q from P' to cancel (2) */ Signed-off-by: Dan Williams --- arch/arm/include/asm/hardware/iop3xx-adma.h | 76 ++++++++++++++++++++ arch/arm/include/asm/hardware/iop_adma.h | 1 + arch/arm/mach-iop13xx/include/mach/adma.h | 107 ++++++++++++++++++++++++++++ 3 files changed, 184 insertions(+) (limited to 'arch') diff --git a/arch/arm/include/asm/hardware/iop3xx-adma.h b/arch/arm/include/asm/hardware/iop3xx-adma.h index 26eefea02314..1a8c7279a28b 100644 --- a/arch/arm/include/asm/hardware/iop3xx-adma.h +++ b/arch/arm/include/asm/hardware/iop3xx-adma.h @@ -187,11 +187,74 @@ union iop3xx_desc { void *ptr; }; +/* No support for p+q operations */ +static inline int +iop_chan_pq_slot_count(size_t len, int src_cnt, int *slots_per_op) +{ + BUG(); + return 0; +} + +static inline void +iop_desc_init_pq(struct iop_adma_desc_slot *desc, int src_cnt, + unsigned long flags) +{ + BUG(); +} + +static inline void +iop_desc_set_pq_addr(struct iop_adma_desc_slot *desc, dma_addr_t *addr) +{ + BUG(); +} + +static inline void +iop_desc_set_pq_src_addr(struct iop_adma_desc_slot *desc, int src_idx, + dma_addr_t addr, unsigned char coef) +{ + BUG(); +} + +static inline int +iop_chan_pq_zero_sum_slot_count(size_t len, int src_cnt, int *slots_per_op) +{ + BUG(); + return 0; +} + +static inline void +iop_desc_init_pq_zero_sum(struct iop_adma_desc_slot *desc, int src_cnt, + unsigned long flags) +{ + BUG(); +} + +static inline void +iop_desc_set_pq_zero_sum_byte_count(struct iop_adma_desc_slot *desc, u32 len) +{ + BUG(); +} + +#define iop_desc_set_pq_zero_sum_src_addr iop_desc_set_pq_src_addr + +static inline void +iop_desc_set_pq_zero_sum_addr(struct iop_adma_desc_slot *desc, int pq_idx, + dma_addr_t *src) +{ + BUG(); +} + static inline int iop_adma_get_max_xor(void) { return 32; } +static inline int iop_adma_get_max_pq(void) +{ + BUG(); + return 0; +} + static inline u32 iop_chan_get_current_descriptor(struct iop_adma_chan *chan) { int id = chan->device->id; @@ -332,6 +395,11 @@ static inline int iop_chan_zero_sum_slot_count(size_t len, int src_cnt, return slot_cnt; } +static inline int iop_desc_is_pq(struct iop_adma_desc_slot *desc) +{ + return 0; +} + static inline u32 iop_desc_get_dest_addr(struct iop_adma_desc_slot *desc, struct iop_adma_chan *chan) { @@ -349,6 +417,14 @@ static inline u32 iop_desc_get_dest_addr(struct iop_adma_desc_slot *desc, return 0; } + +static inline u32 iop_desc_get_qdest_addr(struct iop_adma_desc_slot *desc, + struct iop_adma_chan *chan) +{ + BUG(); + return 0; +} + static inline u32 iop_desc_get_byte_count(struct iop_adma_desc_slot *desc, struct iop_adma_chan *chan) { diff --git a/arch/arm/include/asm/hardware/iop_adma.h b/arch/arm/include/asm/hardware/iop_adma.h index 385c6e8cbbd2..bbe8a0475cad 100644 --- a/arch/arm/include/asm/hardware/iop_adma.h +++ b/arch/arm/include/asm/hardware/iop_adma.h @@ -106,6 +106,7 @@ struct iop_adma_desc_slot { union { u32 *xor_check_result; u32 *crc32_result; + u32 *pq_check_result; }; }; diff --git a/arch/arm/mach-iop13xx/include/mach/adma.h b/arch/arm/mach-iop13xx/include/mach/adma.h index 1cd31df8924d..6d3782d85a9f 100644 --- a/arch/arm/mach-iop13xx/include/mach/adma.h +++ b/arch/arm/mach-iop13xx/include/mach/adma.h @@ -150,6 +150,8 @@ static inline int iop_adma_get_max_xor(void) return 16; } +#define iop_adma_get_max_pq iop_adma_get_max_xor + static inline u32 iop_chan_get_current_descriptor(struct iop_adma_chan *chan) { return __raw_readl(ADMA_ADAR(chan)); @@ -211,7 +213,10 @@ iop_chan_xor_slot_count(size_t len, int src_cnt, int *slots_per_op) #define IOP_ADMA_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT #define IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT #define IOP_ADMA_XOR_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT +#define IOP_ADMA_PQ_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT #define iop_chan_zero_sum_slot_count(l, s, o) iop_chan_xor_slot_count(l, s, o) +#define iop_chan_pq_slot_count iop_chan_xor_slot_count +#define iop_chan_pq_zero_sum_slot_count iop_chan_xor_slot_count static inline u32 iop_desc_get_dest_addr(struct iop_adma_desc_slot *desc, struct iop_adma_chan *chan) @@ -220,6 +225,13 @@ static inline u32 iop_desc_get_dest_addr(struct iop_adma_desc_slot *desc, return hw_desc->dest_addr; } +static inline u32 iop_desc_get_qdest_addr(struct iop_adma_desc_slot *desc, + struct iop_adma_chan *chan) +{ + struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc; + return hw_desc->q_dest_addr; +} + static inline u32 iop_desc_get_byte_count(struct iop_adma_desc_slot *desc, struct iop_adma_chan *chan) { @@ -319,6 +331,58 @@ iop_desc_init_zero_sum(struct iop_adma_desc_slot *desc, int src_cnt, return 1; } +static inline void +iop_desc_init_pq(struct iop_adma_desc_slot *desc, int src_cnt, + unsigned long flags) +{ + struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc; + union { + u32 value; + struct iop13xx_adma_desc_ctrl field; + } u_desc_ctrl; + + u_desc_ctrl.value = 0; + u_desc_ctrl.field.src_select = src_cnt - 1; + u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */ + u_desc_ctrl.field.pq_xfer_en = 1; + u_desc_ctrl.field.p_xfer_dis = !!(flags & DMA_PREP_PQ_DISABLE_P); + u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT; + hw_desc->desc_ctrl = u_desc_ctrl.value; +} + +static inline int iop_desc_is_pq(struct iop_adma_desc_slot *desc) +{ + struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc; + union { + u32 value; + struct iop13xx_adma_desc_ctrl field; + } u_desc_ctrl; + + u_desc_ctrl.value = hw_desc->desc_ctrl; + return u_desc_ctrl.field.pq_xfer_en; +} + +static inline void +iop_desc_init_pq_zero_sum(struct iop_adma_desc_slot *desc, int src_cnt, + unsigned long flags) +{ + struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc; + union { + u32 value; + struct iop13xx_adma_desc_ctrl field; + } u_desc_ctrl; + + u_desc_ctrl.value = 0; + u_desc_ctrl.field.src_select = src_cnt - 1; + u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */ + u_desc_ctrl.field.zero_result = 1; + u_desc_ctrl.field.status_write_back_en = 1; + u_desc_ctrl.field.pq_xfer_en = 1; + u_desc_ctrl.field.p_xfer_dis = !!(flags & DMA_PREP_PQ_DISABLE_P); + u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT; + hw_desc->desc_ctrl = u_desc_ctrl.value; +} + static inline void iop_desc_set_byte_count(struct iop_adma_desc_slot *desc, struct iop_adma_chan *chan, u32 byte_count) @@ -351,6 +415,7 @@ iop_desc_set_zero_sum_byte_count(struct iop_adma_desc_slot *desc, u32 len) } } +#define iop_desc_set_pq_zero_sum_byte_count iop_desc_set_zero_sum_byte_count static inline void iop_desc_set_dest_addr(struct iop_adma_desc_slot *desc, struct iop_adma_chan *chan, @@ -361,6 +426,16 @@ static inline void iop_desc_set_dest_addr(struct iop_adma_desc_slot *desc, hw_desc->upper_dest_addr = 0; } +static inline void +iop_desc_set_pq_addr(struct iop_adma_desc_slot *desc, dma_addr_t *addr) +{ + struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc; + + hw_desc->dest_addr = addr[0]; + hw_desc->q_dest_addr = addr[1]; + hw_desc->upper_dest_addr = 0; +} + static inline void iop_desc_set_memcpy_src_addr(struct iop_adma_desc_slot *desc, dma_addr_t addr) { @@ -388,6 +463,29 @@ static inline void iop_desc_set_xor_src_addr(struct iop_adma_desc_slot *desc, } while (slot_cnt); } +static inline void +iop_desc_set_pq_src_addr(struct iop_adma_desc_slot *desc, int src_idx, + dma_addr_t addr, unsigned char coef) +{ + int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op; + struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc, *iter; + struct iop13xx_adma_src *src; + int i = 0; + + do { + iter = iop_hw_desc_slot_idx(hw_desc, i); + src = &iter->src[src_idx]; + src->src_addr = addr; + src->pq_upper_src_addr = 0; + src->pq_dmlt = coef; + slot_cnt -= slots_per_op; + if (slot_cnt) { + i += slots_per_op; + addr += IOP_ADMA_PQ_MAX_BYTE_COUNT; + } + } while (slot_cnt); +} + static inline void iop_desc_init_interrupt(struct iop_adma_desc_slot *desc, struct iop_adma_chan *chan) @@ -399,6 +497,15 @@ iop_desc_init_interrupt(struct iop_adma_desc_slot *desc, } #define iop_desc_set_zero_sum_src_addr iop_desc_set_xor_src_addr +#define iop_desc_set_pq_zero_sum_src_addr iop_desc_set_pq_src_addr + +static inline void +iop_desc_set_pq_zero_sum_addr(struct iop_adma_desc_slot *desc, int pq_idx, + dma_addr_t *src) +{ + iop_desc_set_xor_src_addr(desc, pq_idx, src[pq_idx]); + iop_desc_set_xor_src_addr(desc, pq_idx+1, src[pq_idx+1]); +} static inline void iop_desc_set_next_desc(struct iop_adma_desc_slot *desc, u32 next_desc_addr) -- cgit v1.2.2 From 9308add6ea4fedeba37b0d7c4630a542bd34f214 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 8 Sep 2009 17:42:52 -0700 Subject: dmaengine: cleanup unused transaction types No drivers currently implement these operation types, so they can be deleted. Signed-off-by: Dan Williams --- arch/arm/mach-iop13xx/setup.c | 7 ------- arch/arm/plat-iop/adma.c | 2 -- 2 files changed, 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c index faaef95342b6..5c147fb66a01 100644 --- a/arch/arm/mach-iop13xx/setup.c +++ b/arch/arm/mach-iop13xx/setup.c @@ -477,10 +477,8 @@ void __init iop13xx_platform_init(void) plat_data = &iop13xx_adma_0_data; dma_cap_set(DMA_MEMCPY, plat_data->cap_mask); dma_cap_set(DMA_XOR, plat_data->cap_mask); - dma_cap_set(DMA_DUAL_XOR, plat_data->cap_mask); dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask); dma_cap_set(DMA_MEMSET, plat_data->cap_mask); - dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask); dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask); break; case IOP13XX_INIT_ADMA_1: @@ -489,10 +487,8 @@ void __init iop13xx_platform_init(void) plat_data = &iop13xx_adma_1_data; dma_cap_set(DMA_MEMCPY, plat_data->cap_mask); dma_cap_set(DMA_XOR, plat_data->cap_mask); - dma_cap_set(DMA_DUAL_XOR, plat_data->cap_mask); dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask); dma_cap_set(DMA_MEMSET, plat_data->cap_mask); - dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask); dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask); break; case IOP13XX_INIT_ADMA_2: @@ -501,13 +497,10 @@ void __init iop13xx_platform_init(void) plat_data = &iop13xx_adma_2_data; dma_cap_set(DMA_MEMCPY, plat_data->cap_mask); dma_cap_set(DMA_XOR, plat_data->cap_mask); - dma_cap_set(DMA_DUAL_XOR, plat_data->cap_mask); dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask); dma_cap_set(DMA_MEMSET, plat_data->cap_mask); - dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask); dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask); dma_cap_set(DMA_PQ, plat_data->cap_mask); - dma_cap_set(DMA_PQ_UPDATE, plat_data->cap_mask); dma_cap_set(DMA_PQ_VAL, plat_data->cap_mask); break; } diff --git a/arch/arm/plat-iop/adma.c b/arch/arm/plat-iop/adma.c index da1dd0dab07c..1ff6a37e893c 100644 --- a/arch/arm/plat-iop/adma.c +++ b/arch/arm/plat-iop/adma.c @@ -179,7 +179,6 @@ static int __init iop3xx_adma_cap_init(void) dma_cap_set(DMA_INTERRUPT, iop3xx_dma_0_data.cap_mask); #else dma_cap_set(DMA_MEMCPY, iop3xx_dma_0_data.cap_mask); - dma_cap_set(DMA_MEMCPY_CRC32C, iop3xx_dma_0_data.cap_mask); dma_cap_set(DMA_INTERRUPT, iop3xx_dma_0_data.cap_mask); #endif @@ -188,7 +187,6 @@ static int __init iop3xx_adma_cap_init(void) dma_cap_set(DMA_INTERRUPT, iop3xx_dma_1_data.cap_mask); #else dma_cap_set(DMA_MEMCPY, iop3xx_dma_1_data.cap_mask); - dma_cap_set(DMA_MEMCPY_CRC32C, iop3xx_dma_1_data.cap_mask); dma_cap_set(DMA_INTERRUPT, iop3xx_dma_1_data.cap_mask); #endif -- cgit v1.2.2 From 308136d1abcb2d759bac40ed4f5d42ac4af59d8b Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 8 Sep 2009 17:53:02 -0700 Subject: iop-adma: implement a private tx_list Drop iop-adma's use of tx_list from struct dma_async_tx_descriptor in preparation for removal of this field. Signed-off-by: Dan Williams --- arch/arm/include/asm/hardware/iop_adma.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/include/asm/hardware/iop_adma.h b/arch/arm/include/asm/hardware/iop_adma.h index 385c6e8cbbd2..95dc133d0a7f 100644 --- a/arch/arm/include/asm/hardware/iop_adma.h +++ b/arch/arm/include/asm/hardware/iop_adma.h @@ -86,6 +86,7 @@ struct iop_adma_chan { * @idx: pool index * @unmap_src_cnt: number of xor sources * @unmap_len: transaction bytecount + * @tx_list: list of descriptors that are associated with one operation * @async_tx: support for the async_tx api * @group_list: list of slots that make up a multi-descriptor transaction * for example transfer lengths larger than the supported hw max @@ -102,6 +103,7 @@ struct iop_adma_desc_slot { u16 idx; u16 unmap_src_cnt; size_t unmap_len; + struct list_head tx_list; struct dma_async_tx_descriptor async_tx; union { u32 *xor_check_result; -- cgit v1.2.2 From bbea0b6e0d214ef1511b9c6ccf3af26b38f0af7d Mon Sep 17 00:00:00 2001 From: Ira Snyder Date: Tue, 8 Sep 2009 17:53:04 -0700 Subject: fsldma: Add DMA_SLAVE support Use the DMA_SLAVE capability of the DMAEngine API to copy/from a scatterlist into an arbitrary list of hardware address/length pairs. This allows a single DMA transaction to copy data from several different devices into a scatterlist at the same time. This also adds support to enable some controller-specific features such as external start and external pause for a DMA transaction. [dan.j.williams@intel.com: rebased on tx_list movement] Signed-off-by: Ira W. Snyder Acked-by: Li Yang Acked-by: Kumar Gala Signed-off-by: Dan Williams --- arch/powerpc/include/asm/fsldma.h | 136 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 136 insertions(+) create mode 100644 arch/powerpc/include/asm/fsldma.h (limited to 'arch') diff --git a/arch/powerpc/include/asm/fsldma.h b/arch/powerpc/include/asm/fsldma.h new file mode 100644 index 000000000000..a67aeed17d40 --- /dev/null +++ b/arch/powerpc/include/asm/fsldma.h @@ -0,0 +1,136 @@ +/* + * Freescale MPC83XX / MPC85XX DMA Controller + * + * Copyright (c) 2009 Ira W. Snyder + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef __ARCH_POWERPC_ASM_FSLDMA_H__ +#define __ARCH_POWERPC_ASM_FSLDMA_H__ + +#include + +/* + * Definitions for the Freescale DMA controller's DMA_SLAVE implemention + * + * The Freescale DMA_SLAVE implementation was designed to handle many-to-many + * transfers. An example usage would be an accelerated copy between two + * scatterlists. Another example use would be an accelerated copy from + * multiple non-contiguous device buffers into a single scatterlist. + * + * A DMA_SLAVE transaction is defined by a struct fsl_dma_slave. This + * structure contains a list of hardware addresses that should be copied + * to/from the scatterlist passed into device_prep_slave_sg(). The structure + * also has some fields to enable hardware-specific features. + */ + +/** + * struct fsl_dma_hw_addr + * @entry: linked list entry + * @address: the hardware address + * @length: length to transfer + * + * Holds a single physical hardware address / length pair for use + * with the DMAEngine DMA_SLAVE API. + */ +struct fsl_dma_hw_addr { + struct list_head entry; + + dma_addr_t address; + size_t length; +}; + +/** + * struct fsl_dma_slave + * @addresses: a linked list of struct fsl_dma_hw_addr structures + * @request_count: value for DMA request count + * @src_loop_size: setup and enable constant source-address DMA transfers + * @dst_loop_size: setup and enable constant destination address DMA transfers + * @external_start: enable externally started DMA transfers + * @external_pause: enable externally paused DMA transfers + * + * Holds a list of address / length pairs for use with the DMAEngine + * DMA_SLAVE API implementation for the Freescale DMA controller. + */ +struct fsl_dma_slave { + + /* List of hardware address/length pairs */ + struct list_head addresses; + + /* Support for extra controller features */ + unsigned int request_count; + unsigned int src_loop_size; + unsigned int dst_loop_size; + bool external_start; + bool external_pause; +}; + +/** + * fsl_dma_slave_append - add an address/length pair to a struct fsl_dma_slave + * @slave: the &struct fsl_dma_slave to add to + * @address: the hardware address to add + * @length: the length of bytes to transfer from @address + * + * Add a hardware address/length pair to a struct fsl_dma_slave. Returns 0 on + * success, -ERRNO otherwise. + */ +static inline int fsl_dma_slave_append(struct fsl_dma_slave *slave, + dma_addr_t address, size_t length) +{ + struct fsl_dma_hw_addr *addr; + + addr = kzalloc(sizeof(*addr), GFP_ATOMIC); + if (!addr) + return -ENOMEM; + + INIT_LIST_HEAD(&addr->entry); + addr->address = address; + addr->length = length; + + list_add_tail(&addr->entry, &slave->addresses); + return 0; +} + +/** + * fsl_dma_slave_free - free a struct fsl_dma_slave + * @slave: the struct fsl_dma_slave to free + * + * Free a struct fsl_dma_slave and all associated address/length pairs + */ +static inline void fsl_dma_slave_free(struct fsl_dma_slave *slave) +{ + struct fsl_dma_hw_addr *addr, *tmp; + + if (slave) { + list_for_each_entry_safe(addr, tmp, &slave->addresses, entry) { + list_del(&addr->entry); + kfree(addr); + } + + kfree(slave); + } +} + +/** + * fsl_dma_slave_alloc - allocate a struct fsl_dma_slave + * @gfp: the flags to pass to kmalloc when allocating this structure + * + * Allocate a struct fsl_dma_slave for use by the DMA_SLAVE API. Returns a new + * struct fsl_dma_slave on success, or NULL on failure. + */ +static inline struct fsl_dma_slave *fsl_dma_slave_alloc(gfp_t gfp) +{ + struct fsl_dma_slave *slave; + + slave = kzalloc(sizeof(*slave), gfp); + if (!slave) + return NULL; + + INIT_LIST_HEAD(&slave->addresses); + return slave; +} + +#endif /* __ARCH_POWERPC_ASM_FSLDMA_H__ */ -- cgit v1.2.2 From d8902adcc1a9fd484c8cb5e575152e32192c1ff8 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Mon, 7 Sep 2009 03:26:23 +0000 Subject: dmaengine: sh: Add Support SuperH DMA Engine driver This supported all DMA channels, and it was tested in SH7722, SH7780, SH7785 and SH7763. This can not use with SH DMA API. Signed-off-by: Nobuhiro Iwamatsu Reviewed-by: Matt Fleming Acked-by: Maciej Sosnowski Acked-by: Paul Mundt Signed-off-by: Dan Williams --- arch/sh/drivers/dma/Kconfig | 12 +++++++++--- arch/sh/drivers/dma/Makefile | 3 +-- arch/sh/include/asm/dma-sh.h | 13 +++++++++++++ 3 files changed, 23 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig index 63e9dd30b41c..f935a7e5cbe5 100644 --- a/arch/sh/drivers/dma/Kconfig +++ b/arch/sh/drivers/dma/Kconfig @@ -1,12 +1,9 @@ menu "DMA support" -config SH_DMA_API - bool config SH_DMA bool "SuperH on-chip DMA controller (DMAC) support" depends on CPU_SH3 || CPU_SH4 - select SH_DMA_API default n config SH_DMA_IRQ_MULTI @@ -19,6 +16,15 @@ config SH_DMA_IRQ_MULTI CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 || \ CPU_SUBTYPE_SH7760 +config SH_DMA_API + depends on SH_DMA + bool "SuperH DMA API support" + default n + help + SH_DMA_API always enabled DMA API of used SuperH. + If you want to use DMA ENGINE, you must not enable this. + Please enable DMA_ENGINE and SH_DMAE. + config NR_ONCHIP_DMA_CHANNELS int depends on SH_DMA diff --git a/arch/sh/drivers/dma/Makefile b/arch/sh/drivers/dma/Makefile index c6068137b46f..d88c9484762c 100644 --- a/arch/sh/drivers/dma/Makefile +++ b/arch/sh/drivers/dma/Makefile @@ -2,8 +2,7 @@ # Makefile for the SuperH DMA specific kernel interface routines under Linux. # -obj-$(CONFIG_SH_DMA_API) += dma-api.o dma-sysfs.o -obj-$(CONFIG_SH_DMA) += dma-sh.o +obj-$(CONFIG_SH_DMA_API) += dma-sh.o dma-api.o dma-sysfs.o obj-$(CONFIG_PVR2_DMA) += dma-pvr2.o obj-$(CONFIG_G2_DMA) += dma-g2.o obj-$(CONFIG_SH_DMABRG) += dmabrg.o diff --git a/arch/sh/include/asm/dma-sh.h b/arch/sh/include/asm/dma-sh.h index 0c8f8e14622a..89bdac558dbc 100644 --- a/arch/sh/include/asm/dma-sh.h +++ b/arch/sh/include/asm/dma-sh.h @@ -115,4 +115,17 @@ static u32 dma_base_addr[] __maybe_unused = { #define CHCR 0x0C #define DMAOR 0x40 +/* + * for dma engine + * + * SuperH DMA mode + */ +#define SHDMA_MIX_IRQ (1 << 1) +#define SHDMA_DMAOR1 (1 << 2) +#define SHDMA_DMAE1 (1 << 3) + +struct sh_dmae_pdata { + unsigned int mode; +}; + #endif /* __DMA_SH_H */ -- cgit v1.2.2