From 497799d368b2106c3266a20d75ff221eed068cad Mon Sep 17 00:00:00 2001 From: Matt Porter Date: Sun, 31 Jul 2005 22:34:53 -0700 Subject: [PATCH] ppc32: add bamboo platform Add Bamboo platform support. This is an AMCC 440EP-based reference platform. Signed-off-by: Wade Farnsworth Signed-off-by: Matt Porter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/platforms/4xx/bamboo.c | 427 ++++++++++++++++++++++++++++++++++++++++ arch/ppc/platforms/4xx/bamboo.h | 136 +++++++++++++ 2 files changed, 563 insertions(+) create mode 100644 arch/ppc/platforms/4xx/bamboo.c create mode 100644 arch/ppc/platforms/4xx/bamboo.h (limited to 'arch') diff --git a/arch/ppc/platforms/4xx/bamboo.c b/arch/ppc/platforms/4xx/bamboo.c new file mode 100644 index 000000000000..f116787b0b76 --- /dev/null +++ b/arch/ppc/platforms/4xx/bamboo.c @@ -0,0 +1,427 @@ +/* + * arch/ppc/platforms/4xx/bamboo.c + * + * Bamboo board specific routines + * + * Wade Farnsworth + * Copyright 2004 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +/* + * This is a horrible kludge, we eventually need to abstract this + * generic PHY stuff, so the standard phy mode defines can be + * easily used from arch code. + */ +#include "../../../../drivers/net/ibm_emac/ibm_emac_phy.h" + +bd_t __res; + +static struct ibm44x_clocks clocks __initdata; + +/* + * Bamboo external IRQ triggering/polarity settings + */ +unsigned char ppc4xx_uic_ext_irq_cfg[] __initdata = { + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ0: Ethernet transceiver */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* IRQ1: Expansion connector */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ2: PCI slot 0 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ3: PCI slot 1 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ4: PCI slot 2 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ5: PCI slot 3 */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_NEGATIVE), /* IRQ6: SMI pushbutton */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ7: EXT */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ8: EXT */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ9: EXT */ +}; + +static void __init +bamboo_calibrate_decr(void) +{ + unsigned int freq; + + if (mfspr(SPRN_CCR1) & CCR1_TCS) + freq = BAMBOO_TMRCLK; + else + freq = clocks.cpu; + + ibm44x_calibrate_decr(freq); + +} + +static int +bamboo_show_cpuinfo(struct seq_file *m) +{ + seq_printf(m, "vendor\t\t: IBM\n"); + seq_printf(m, "machine\t\t: PPC440EP EVB (Bamboo)\n"); + + return 0; +} + +static inline int +bamboo_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + { 28, 28, 28, 28 }, /* IDSEL 1 - PCI Slot 0 */ + { 27, 27, 27, 27 }, /* IDSEL 2 - PCI Slot 1 */ + { 26, 26, 26, 26 }, /* IDSEL 3 - PCI Slot 2 */ + { 25, 25, 25, 25 }, /* IDSEL 4 - PCI Slot 3 */ + }; + + const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; +} + +static void __init bamboo_set_emacdata(void) +{ + unsigned char * selection1_base; + struct ocp_def *def; + struct ocp_func_emac_data *emacdata; + u8 selection1_val; + int mode; + + selection1_base = ioremap64(BAMBOO_FPGA_SELECTION1_REG_ADDR, 16); + selection1_val = readb(selection1_base); + iounmap((void *) selection1_base); + if (BAMBOO_SEL_MII(selection1_val)) + mode = PHY_MODE_MII; + else if (BAMBOO_SEL_RMII(selection1_val)) + mode = PHY_MODE_RMII; + else + mode = PHY_MODE_SMII; + + /* Set mac_addr and phy mode for each EMAC */ + + def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 0); + emacdata = def->additions; + memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6); + emacdata->phy_mode = mode; + + def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 1); + emacdata = def->additions; + memcpy(emacdata->mac_addr, __res.bi_enet1addr, 6); + emacdata->phy_mode = mode; +} + +static int +bamboo_exclude_device(unsigned char bus, unsigned char devfn) +{ + return (bus == 0 && devfn == 0); +} + +#define PCI_READW(offset) \ + (readw((void *)((u32)pci_reg_base+offset))) + +#define PCI_WRITEW(value, offset) \ + (writew(value, (void *)((u32)pci_reg_base+offset))) + +#define PCI_WRITEL(value, offset) \ + (writel(value, (void *)((u32)pci_reg_base+offset))) + +static void __init +bamboo_setup_pci(void) +{ + void *pci_reg_base; + unsigned long memory_size; + memory_size = ppc_md.find_end_of_memory(); + + pci_reg_base = ioremap64(BAMBOO_PCIL0_BASE, BAMBOO_PCIL0_SIZE); + + /* Enable PCI I/O, Mem, and Busmaster cycles */ + PCI_WRITEW(PCI_READW(PCI_COMMAND) | + PCI_COMMAND_MEMORY | + PCI_COMMAND_MASTER, PCI_COMMAND); + + /* Disable region first */ + PCI_WRITEL(0, BAMBOO_PCIL0_PMM0MA); + + /* PLB starting addr: 0x00000000A0000000 */ + PCI_WRITEL(BAMBOO_PCI_PHY_MEM_BASE, BAMBOO_PCIL0_PMM0LA); + + /* PCI start addr, 0xA0000000 (PCI Address) */ + PCI_WRITEL(BAMBOO_PCI_MEM_BASE, BAMBOO_PCIL0_PMM0PCILA); + PCI_WRITEL(0, BAMBOO_PCIL0_PMM0PCIHA); + + /* Enable no pre-fetch, enable region */ + PCI_WRITEL(((0xffffffff - + (BAMBOO_PCI_UPPER_MEM - BAMBOO_PCI_MEM_BASE)) | 0x01), + BAMBOO_PCIL0_PMM0MA); + + /* Disable region one */ + PCI_WRITEL(0, BAMBOO_PCIL0_PMM1MA); + PCI_WRITEL(0, BAMBOO_PCIL0_PMM1LA); + PCI_WRITEL(0, BAMBOO_PCIL0_PMM1PCILA); + PCI_WRITEL(0, BAMBOO_PCIL0_PMM1PCIHA); + PCI_WRITEL(0, BAMBOO_PCIL0_PMM1MA); + + /* Disable region two */ + PCI_WRITEL(0, BAMBOO_PCIL0_PMM2MA); + PCI_WRITEL(0, BAMBOO_PCIL0_PMM2LA); + PCI_WRITEL(0, BAMBOO_PCIL0_PMM2PCILA); + PCI_WRITEL(0, BAMBOO_PCIL0_PMM2PCIHA); + PCI_WRITEL(0, BAMBOO_PCIL0_PMM2MA); + + /* Now configure the PCI->PLB windows, we only use PTM1 + * + * For Inbound flow, set the window size to all available memory + * This is required because if size is smaller, + * then Eth/PCI DD would fail as PCI card not able to access + * the memory allocated by DD. + */ + + PCI_WRITEL(0, BAMBOO_PCIL0_PTM1MS); /* disabled region 1 */ + PCI_WRITEL(0, BAMBOO_PCIL0_PTM1LA); /* begin of address map */ + + memory_size = 1 << fls(memory_size - 1); + + /* Size low + Enabled */ + PCI_WRITEL((0xffffffff - (memory_size - 1)) | 0x1, BAMBOO_PCIL0_PTM1MS); + + eieio(); + iounmap(pci_reg_base); +} + +static void __init +bamboo_setup_hose(void) +{ + unsigned int bar_response, bar; + struct pci_controller *hose; + + bamboo_setup_pci(); + + hose = pcibios_alloc_controller(); + + if (!hose) + return; + + hose->first_busno = 0; + hose->last_busno = 0xff; + + hose->pci_mem_offset = BAMBOO_PCI_MEM_OFFSET; + + pci_init_resource(&hose->io_resource, + BAMBOO_PCI_LOWER_IO, + BAMBOO_PCI_UPPER_IO, + IORESOURCE_IO, + "PCI host bridge"); + + pci_init_resource(&hose->mem_resources[0], + BAMBOO_PCI_LOWER_MEM, + BAMBOO_PCI_UPPER_MEM, + IORESOURCE_MEM, + "PCI host bridge"); + + ppc_md.pci_exclude_device = bamboo_exclude_device; + + hose->io_space.start = BAMBOO_PCI_LOWER_IO; + hose->io_space.end = BAMBOO_PCI_UPPER_IO; + hose->mem_space.start = BAMBOO_PCI_LOWER_MEM; + hose->mem_space.end = BAMBOO_PCI_UPPER_MEM; + isa_io_base = + (unsigned long)ioremap64(BAMBOO_PCI_IO_BASE, BAMBOO_PCI_IO_SIZE); + hose->io_base_virt = (void *)isa_io_base; + + setup_indirect_pci(hose, + BAMBOO_PCI_CFGA_PLB32, + BAMBOO_PCI_CFGD_PLB32); + hose->set_cfg_type = 1; + + /* Zero config bars */ + for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) { + early_write_config_dword(hose, hose->first_busno, + PCI_FUNC(hose->first_busno), bar, + 0x00000000); + early_read_config_dword(hose, hose->first_busno, + PCI_FUNC(hose->first_busno), bar, + &bar_response); + } + + hose->last_busno = pciauto_bus_scan(hose, hose->first_busno); + + ppc_md.pci_swizzle = common_swizzle; + ppc_md.pci_map_irq = bamboo_map_irq; +} + +TODC_ALLOC(); + +static void __init +bamboo_early_serial_map(void) +{ + struct uart_port port; + + /* Setup ioremapped serial port access */ + memset(&port, 0, sizeof(port)); + port.membase = ioremap64(PPC440EP_UART0_ADDR, 8); + port.irq = 0; + port.uartclk = clocks.uart0; + port.regshift = 0; + port.iotype = SERIAL_IO_MEM; + port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; + port.line = 0; + + if (early_serial_setup(&port) != 0) { + printk("Early serial init of port 0 failed\n"); + } + +#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) + /* Configure debug serial access */ + gen550_init(0, &port); +#endif + + port.membase = ioremap64(PPC440EP_UART1_ADDR, 8); + port.irq = 1; + port.uartclk = clocks.uart1; + port.line = 1; + + if (early_serial_setup(&port) != 0) { + printk("Early serial init of port 1 failed\n"); + } + +#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) + /* Configure debug serial access */ + gen550_init(1, &port); +#endif + + port.membase = ioremap64(PPC440EP_UART2_ADDR, 8); + port.irq = 3; + port.uartclk = clocks.uart2; + port.line = 2; + + if (early_serial_setup(&port) != 0) { + printk("Early serial init of port 2 failed\n"); + } + +#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) + /* Configure debug serial access */ + gen550_init(2, &port); +#endif + + port.membase = ioremap64(PPC440EP_UART3_ADDR, 8); + port.irq = 4; + port.uartclk = clocks.uart3; + port.line = 3; + + if (early_serial_setup(&port) != 0) { + printk("Early serial init of port 3 failed\n"); + } +} + +static void __init +bamboo_setup_arch(void) +{ + + bamboo_set_emacdata(); + + ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200); + ocp_sys_info.opb_bus_freq = clocks.opb; + + /* Setup TODC access */ + TODC_INIT(TODC_TYPE_DS1743, + 0, + 0, + ioremap64(BAMBOO_RTC_ADDR, BAMBOO_RTC_SIZE), + 8); + + /* init to some ~sane value until calibrate_delay() runs */ + loops_per_jiffy = 50000000/HZ; + + /* Setup PCI host bridge */ + bamboo_setup_hose(); + +#ifdef CONFIG_BLK_DEV_INITRD + if (initrd_start) + ROOT_DEV = Root_RAM0; + else +#endif +#ifdef CONFIG_ROOT_NFS + ROOT_DEV = Root_NFS; +#else + ROOT_DEV = Root_HDA1; +#endif + + bamboo_early_serial_map(); + + /* Identify the system */ + printk("IBM Bamboo port (MontaVista Software, Inc. (source@mvista.com))\n"); +} + +void __init platform_init(unsigned long r3, unsigned long r4, + unsigned long r5, unsigned long r6, unsigned long r7) +{ + parse_bootinfo(find_bootinfo()); + + /* + * If we were passed in a board information, copy it into the + * residual data area. + */ + if (r3) + __res = *(bd_t *)(r3 + KERNELBASE); + + + ibm44x_platform_init(); + + ppc_md.setup_arch = bamboo_setup_arch; + ppc_md.show_cpuinfo = bamboo_show_cpuinfo; + ppc_md.get_irq = NULL; /* Set in ppc4xx_pic_init() */ + + ppc_md.calibrate_decr = bamboo_calibrate_decr; + ppc_md.time_init = todc_time_init; + ppc_md.set_rtc_time = todc_set_rtc_time; + ppc_md.get_rtc_time = todc_get_rtc_time; + + ppc_md.nvram_read_val = todc_direct_read_val; + ppc_md.nvram_write_val = todc_direct_write_val; +#ifdef CONFIG_KGDB + ppc_md.early_serial_map = bamboo_early_serial_map; +#endif +} + diff --git a/arch/ppc/platforms/4xx/bamboo.h b/arch/ppc/platforms/4xx/bamboo.h new file mode 100644 index 000000000000..63d714504148 --- /dev/null +++ b/arch/ppc/platforms/4xx/bamboo.h @@ -0,0 +1,136 @@ +/* + * arch/ppc/platforms/bamboo.h + * + * Bamboo board definitions + * + * Wade Farnsworth + * + * Copyright 2004 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifdef __KERNEL__ +#ifndef __ASM_BAMBOO_H__ +#define __ASM_BAMBOO_H__ + +#include +#include + +/* F/W TLB mapping used in bootloader glue to reset EMAC */ +#define PPC44x_EMAC0_MR0 0x0EF600E00 + +/* Location of MAC addresses in PIBS image */ +#define PIBS_FLASH_BASE 0xfff00000 +#define PIBS_MAC_BASE (PIBS_FLASH_BASE+0xc0400) +#define PIBS_MAC_SIZE 0x200 +#define PIBS_MAC_OFFSET 0x100 + +/* Default clock rate */ +#define BAMBOO_TMRCLK 25000000 + +/* RTC/NVRAM location */ +#define BAMBOO_RTC_ADDR 0x080000000ULL +#define BAMBOO_RTC_SIZE 0x2000 + +/* FPGA Registers */ +#define BAMBOO_FPGA_ADDR 0x080002000ULL + +#define BAMBOO_FPGA_CONFIG2_REG_ADDR (BAMBOO_FPGA_ADDR + 0x1) +#define BAMBOO_FULL_DUPLEX_EN(x) (x & 0x08) +#define BAMBOO_FORCE_100Mbps(x) (x & 0x04) +#define BAMBOO_AUTONEGOTIATE(x) (x & 0x02) + +#define BAMBOO_FPGA_SETTING_REG_ADDR (BAMBOO_FPGA_ADDR + 0x3) +#define BAMBOO_BOOT_SMALL_FLASH(x) (!(x & 0x80)) +#define BAMBOO_LARGE_FLASH_EN(x) (!(x & 0x40)) +#define BAMBOO_BOOT_NAND_FLASH(x) (!(x & 0x20)) + +#define BAMBOO_FPGA_SELECTION1_REG_ADDR (BAMBOO_FPGA_ADDR + 0x4) +#define BAMBOO_SEL_MII(x) (x & 0x80) +#define BAMBOO_SEL_RMII(x) (x & 0x40) +#define BAMBOO_SEL_SMII(x) (x & 0x20) + +/* Flash */ +#define BAMBOO_SMALL_FLASH_LOW 0x087f00000ULL +#define BAMBOO_SMALL_FLASH_HIGH 0x0fff00000ULL +#define BAMBOO_SMALL_FLASH_SIZE 0x100000 +#define BAMBOO_LARGE_FLASH_LOW 0x087800000ULL +#define BAMBOO_LARGE_FLASH_HIGH1 0x0ff800000ULL +#define BAMBOO_LARGE_FLASH_HIGH2 0x0ffc00000ULL +#define BAMBOO_LARGE_FLASH_SIZE 0x400000 +#define BAMBOO_SRAM_LOW 0x087f00000ULL +#define BAMBOO_SRAM_HIGH1 0x0fff00000ULL +#define BAMBOO_SRAM_HIGH2 0x0ff800000ULL +#define BAMBOO_SRAM_SIZE 0x100000 +#define BAMBOO_NAND_FLASH_REG_ADDR 0x090000000ULL +#define BAMBOO_NAND_FLASH_REG_SIZE 0x2000 + +/* + * Serial port defines + */ +#define RS_TABLE_SIZE 4 + +#define UART0_IO_BASE 0xEF600300 +#define UART1_IO_BASE 0xEF600400 +#define UART2_IO_BASE 0xEF600500 +#define UART3_IO_BASE 0xEF600600 + +#define BASE_BAUD 33177600/3/16 +#define UART0_INT 0 +#define UART1_INT 1 +#define UART2_INT 3 +#define UART3_INT 4 + +#define STD_UART_OP(num) \ + { 0, BASE_BAUD, 0, UART##num##_INT, \ + (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \ + iomem_base: UART##num##_IO_BASE, \ + io_type: SERIAL_IO_MEM}, + +#define SERIAL_PORT_DFNS \ + STD_UART_OP(0) \ + STD_UART_OP(1) \ + STD_UART_OP(2) \ + STD_UART_OP(3) + +/* PCI support */ +#define BAMBOO_PCI_CFGA_PLB32 0xeec00000 +#define BAMBOO_PCI_CFGD_PLB32 0xeec00004 + +#define BAMBOO_PCI_IO_BASE 0x00000000e8000000ULL +#define BAMBOO_PCI_IO_SIZE 0x00010000 +#define BAMBOO_PCI_MEM_OFFSET 0x00000000 +#define BAMBOO_PCI_PHY_MEM_BASE 0x00000000a0000000ULL + +#define BAMBOO_PCI_LOWER_IO 0x00000000 +#define BAMBOO_PCI_UPPER_IO 0x0000ffff +#define BAMBOO_PCI_LOWER_MEM 0xa0000000 +#define BAMBOO_PCI_UPPER_MEM 0xafffffff +#define BAMBOO_PCI_MEM_BASE 0xa0000000 + +#define BAMBOO_PCIL0_BASE 0x00000000ef400000ULL +#define BAMBOO_PCIL0_SIZE 0x40 + +#define BAMBOO_PCIL0_PMM0LA 0x000 +#define BAMBOO_PCIL0_PMM0MA 0x004 +#define BAMBOO_PCIL0_PMM0PCILA 0x008 +#define BAMBOO_PCIL0_PMM0PCIHA 0x00C +#define BAMBOO_PCIL0_PMM1LA 0x010 +#define BAMBOO_PCIL0_PMM1MA 0x014 +#define BAMBOO_PCIL0_PMM1PCILA 0x018 +#define BAMBOO_PCIL0_PMM1PCIHA 0x01C +#define BAMBOO_PCIL0_PMM2LA 0x020 +#define BAMBOO_PCIL0_PMM2MA 0x024 +#define BAMBOO_PCIL0_PMM2PCILA 0x028 +#define BAMBOO_PCIL0_PMM2PCIHA 0x02C +#define BAMBOO_PCIL0_PTM1MS 0x030 +#define BAMBOO_PCIL0_PTM1LA 0x034 +#define BAMBOO_PCIL0_PTM2MS 0x038 +#define BAMBOO_PCIL0_PTM2LA 0x03C + +#endif /* __ASM_BAMBOO_H__ */ +#endif /* __KERNEL__ */ -- cgit v1.2.2