From bcfed2a8a61a0f6ee7769f5093a8279a9e50c526 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Thu, 6 Jun 2013 17:38:11 +0200
Subject: ARM: shmobile: armadillo800eva: remove left-overs

A comment and a #define in board-armadillo800eva.c have been left over
after recent changes and are no longer relevant or needed, remove them.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-armadillo800eva.c | 9 ---------
 1 file changed, 9 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index e115f6742107..66cfd5686578 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -679,15 +679,6 @@ static struct platform_device vcc_sdhi1 = {
 };
 
 /* SDHI0 */
-/*
- * FIXME
- *
- * It use polling mode here, since
- * CD (= Card Detect) pin is not connected to SDHI0_CD.
- * We can use IRQ31 as card detect irq,
- * but it needs chattering removal operation
- */
-#define IRQ31	irq_pin(31)
 static struct sh_mobile_sdhi_info sdhi0_info = {
 	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
 	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
-- 
cgit v1.2.2


From c9031fbb35bd44d99c5cfe7d3c97ec238d63643a Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Date: Sun, 26 May 2013 17:53:37 -0700
Subject: ARM: shmobile: r8a7778: add __initdata on resource and device data

These data will be kmemdup()'ed on
platform_device_add_resources() and platform_device_add_data()

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/setup-r8a7778.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c
index 80c20392ad7c..b70bfeef2f6c 100644
--- a/arch/arm/mach-shmobile/setup-r8a7778.c
+++ b/arch/arm/mach-shmobile/setup-r8a7778.c
@@ -53,7 +53,7 @@
 	.irqs		= SCIx_IRQ_MUXED(irq),			\
 }
 
-static struct plat_sci_port scif_platform_data[] = {
+static struct plat_sci_port scif_platform_data[] __initdata = {
 	SCIF_INFO(0xffe40000, gic_iid(0x66)),
 	SCIF_INFO(0xffe41000, gic_iid(0x67)),
 	SCIF_INFO(0xffe42000, gic_iid(0x68)),
@@ -63,24 +63,24 @@ static struct plat_sci_port scif_platform_data[] = {
 };
 
 /* TMU */
-static struct resource sh_tmu0_resources[] = {
+static struct resource sh_tmu0_resources[] __initdata = {
 	DEFINE_RES_MEM(0xffd80008, 12),
 	DEFINE_RES_IRQ(gic_iid(0x40)),
 };
 
-static struct sh_timer_config sh_tmu0_platform_data = {
+static struct sh_timer_config sh_tmu0_platform_data __initdata = {
 	.name			= "TMU00",
 	.channel_offset		= 0x4,
 	.timer_bit		= 0,
 	.clockevent_rating	= 200,
 };
 
-static struct resource sh_tmu1_resources[] = {
+static struct resource sh_tmu1_resources[] __initdata = {
 	DEFINE_RES_MEM(0xffd80014, 12),
 	DEFINE_RES_IRQ(gic_iid(0x41)),
 };
 
-static struct sh_timer_config sh_tmu1_platform_data = {
+static struct sh_timer_config sh_tmu1_platform_data __initdata = {
 	.name			= "TMU01",
 	.channel_offset		= 0x10,
 	.timer_bit		= 1,
@@ -189,7 +189,7 @@ USB_PLATFORM_INFO(ehci);
 USB_PLATFORM_INFO(ohci);
 
 /* Ether */
-static struct resource ether_resources[] = {
+static struct resource ether_resources[] __initdata = {
 	DEFINE_RES_MEM(0xfde00000, 0x400),
 	DEFINE_RES_IRQ(gic_iid(0x89)),
 };
@@ -203,17 +203,17 @@ void __init r8a7778_add_ether_device(struct sh_eth_plat_data *pdata)
 }
 
 /* PFC/GPIO */
-static struct resource pfc_resources[] = {
+static struct resource pfc_resources[] __initdata = {
 	DEFINE_RES_MEM(0xfffc0000, 0x118),
 };
 
 #define R8A7778_GPIO(idx)						\
-static struct resource r8a7778_gpio##idx##_resources[] = {		\
+static struct resource r8a7778_gpio##idx##_resources[] __initdata = {	\
 	DEFINE_RES_MEM(0xffc40000 + 0x1000 * (idx), 0x30),		\
 	DEFINE_RES_IRQ(gic_iid(0x87)),					\
 };									\
 									\
-static struct gpio_rcar_config r8a7778_gpio##idx##_platform_data = {	\
+static struct gpio_rcar_config r8a7778_gpio##idx##_platform_data __initdata = { \
 	.gpio_base	= 32 * (idx),					\
 	.irq_base	= GPIO_IRQ_BASE(idx),				\
 	.number_of_pins	= 32,						\
@@ -249,7 +249,7 @@ void __init r8a7778_pinmux_init(void)
 };
 
 /* SDHI */
-static struct resource sdhi_resources[] = {
+static struct resource sdhi_resources[] __initdata = {
 	/* SDHI0 */
 	DEFINE_RES_MEM(0xFFE4C000, 0x100),
 	DEFINE_RES_IRQ(gic_iid(0x77)),
@@ -365,12 +365,12 @@ void __init r8a7778_init_late(void)
 	platform_device_register_full(&ohci_info);
 }
 
-static struct renesas_intc_irqpin_config irqpin_platform_data = {
+static struct renesas_intc_irqpin_config irqpin_platform_data __initdata = {
 	.irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
 	.sense_bitfield_width = 2,
 };
 
-static struct resource irqpin_resources[] = {
+static struct resource irqpin_resources[] __initdata = {
 	DEFINE_RES_MEM(0xfe78001c, 4), /* ICR1 */
 	DEFINE_RES_MEM(0xfe780010, 4), /* INTPRI */
 	DEFINE_RES_MEM(0xfe780024, 4), /* INTREQ */
-- 
cgit v1.2.2


From 474f67587345bf7b32bbd9d2b5621e85500103c5 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Thu, 27 Jun 2013 17:09:01 +0900
Subject: ARM: shmobile: sh73a0 pinmux platform device cleanup

Use DEFINE_RES_MEM() and platform_device_register_simple()
to save a couple of lines of code.

Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[ remove const from resource pfc_resources to avoid section miss-match
  reported by 4.4.5 ]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-sh73a0.c | 25 ++++++-------------------
 1 file changed, 6 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index 96e7ca1e4e11..79a6040774a4 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -61,29 +61,16 @@ void __init sh73a0_map_io(void)
 	iotable_init(sh73a0_io_desc, ARRAY_SIZE(sh73a0_io_desc));
 }
 
-static struct resource sh73a0_pfc_resources[] = {
-	[0] = {
-		.start	= 0xe6050000,
-		.end	= 0xe6057fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0xe605801c,
-		.end	= 0xe6058027,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device sh73a0_pfc_device = {
-	.name		= "pfc-sh73a0",
-	.id		= -1,
-	.resource	= sh73a0_pfc_resources,
-	.num_resources	= ARRAY_SIZE(sh73a0_pfc_resources),
+/* PFC */
+static struct resource pfc_resources[] __initdata = {
+	DEFINE_RES_MEM(0xe6050000, 0x8000),
+	DEFINE_RES_MEM(0xe605801c, 0x000c),
 };
 
 void __init sh73a0_pinmux_init(void)
 {
-	platform_device_register(&sh73a0_pfc_device);
+	platform_device_register_simple("pfc-sh73a0", -1, pfc_resources,
+					ARRAY_SIZE(pfc_resources));
 }
 
 static struct plat_sci_port scif0_platform_data = {
-- 
cgit v1.2.2


From 34dd9fc04a028edad7658006764c4d18ac3dca73 Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Sun, 26 May 2013 22:05:23 +0900
Subject: ARM: shmobile: emev2: Remove init_irq declaration in machine
 description

Commit ebafed7a ("ARM: irq: Call irqchip_init if no init_irq function is
specified") removed the need to explictly setup the init_irq field in
the machine description when using only irqchip_init. Remove that
declaration for shmobile as well.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-emev2.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index 1ccddd228112..6e8b6ac3c6b2 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -20,7 +20,6 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/irqchip.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/gpio-em.h>
 #include <linux/of_platform.h>
@@ -454,7 +453,6 @@ DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)")
 	.smp		= smp_ops(emev2_smp_ops),
 	.init_early	= emev2_init_delay,
 	.nr_irqs	= NR_IRQS_LEGACY,
-	.init_irq	= irqchip_init,
 	.init_machine	= emev2_add_standard_devices_dt,
 	.dt_compat	= emev2_boards_compat_dt,
 MACHINE_END
-- 
cgit v1.2.2


From 0bdbe04db005e025d3522ad3ae9797a4954528e9 Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Sun, 26 May 2013 22:05:56 +0900
Subject: ARM: shmobile: r8a73a4: Remove init_irq declaration in machine
 description

Commit ebafed7a ("ARM: irq: Call irqchip_init if no init_irq function is
specified") removed the need to explictly setup the init_irq field in
the machine description when using only irqchip_init. Remove that
declaration for shmobile as well.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-r8a73a4.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c
index 7f45c2edbca9..a8c4e41bf27a 100644
--- a/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ b/arch/arm/mach-shmobile/setup-r8a73a4.c
@@ -18,7 +18,6 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/irq.h>
-#include <linux/irqchip.h>
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
 #include <linux/platform_data/irq-renesas-irqc.h>
@@ -194,7 +193,6 @@ static const char *r8a73a4_boards_compat_dt[] __initdata = {
 };
 
 DT_MACHINE_START(R8A73A4_DT, "Generic R8A73A4 (Flattened Device Tree)")
-	.init_irq	= irqchip_init,
 	.init_machine	= r8a73a4_add_standard_devices_dt,
 	.init_time	= shmobile_timer_init,
 	.dt_compat	= r8a73a4_boards_compat_dt,
-- 
cgit v1.2.2


From c7f6085f6ea7b7cf155f470431cf1b12cd999450 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Mon, 1 Jul 2013 15:01:21 +0900
Subject: ARM: shmobile: ape6evm: Remove init_irq declaration in machine
 description

Remove redundant irqchip_init() callback. The default case
of NULL will result in invoking irqchip_init() anyway.

Signed-off-by: Magnus Damm <damm@opensource.se>
[ horms+renesas@verge.net.au: Trimmed patch to remove portion
  that updates the r8a73a4 SoC and altered the subject to
  use the same format as the patch that updates the r8a73a4. ]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-ape6evm.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/board-ape6evm.c b/arch/arm/mach-shmobile/board-ape6evm.c
index 5eb0caa6a7d0..1fbc39a14e25 100644
--- a/arch/arm/mach-shmobile/board-ape6evm.c
+++ b/arch/arm/mach-shmobile/board-ape6evm.c
@@ -20,7 +20,6 @@
 
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
-#include <linux/irqchip.h>
 #include <linux/kernel.h>
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_device.h>
@@ -102,7 +101,6 @@ static const char *ape6evm_boards_compat_dt[] __initdata = {
 };
 
 DT_MACHINE_START(APE6EVM_DT, "ape6evm")
-	.init_irq	= irqchip_init,
 	.init_time	= shmobile_timer_init,
 	.init_machine	= ape6evm_add_standard_devices,
 	.dt_compat	= ape6evm_boards_compat_dt,
-- 
cgit v1.2.2


From 125332daf2e4119614c561bc8cbf1f49cd243023 Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Mon, 27 May 2013 18:00:22 +0900
Subject: ARM: shmobile: r8a7790: Remove init_irq declaration in machine
 description

Commit ebafed7a ("ARM: irq: Call irqchip_init if no init_irq function is
specified") removed the need to explictly setup the init_irq field in
the machine description when using only irqchip_init. Remove that
declaration for shmobile as well.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-r8a7790.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index 28f94752b8ff..d405dbd44b07 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -19,7 +19,6 @@
  */
 
 #include <linux/irq.h>
-#include <linux/irqchip.h>
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
 #include <linux/serial_sci.h>
@@ -188,7 +187,6 @@ static const char *r8a7790_boards_compat_dt[] __initdata = {
 };
 
 DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)")
-	.init_irq	= irqchip_init,
 	.init_machine	= r8a7790_add_standard_devices_dt,
 	.init_time	= r8a7790_timer_init,
 	.dt_compat	= r8a7790_boards_compat_dt,
-- 
cgit v1.2.2


From 5f85052c606e38c98de28170a2df72f78931aa30 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Mon, 1 Jul 2013 15:01:31 +0900
Subject: ARM: shmobile: lager: Remove init_irq declaration in machine
 description

Remove redundant irqchip_init() callback. The default case
of NULL will result in invoking irqchip_init() anyway.

Signed-off-by: Magnus Damm <damm@opensource.se>
[ horms+renesas@verge.net.au: Trimmed patch to remove portion
  that updates the r8a7790 SoC and altered the subject to
  use the same format as the patch that updates the r8a7790. ]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-lager.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c
index d73e21d3ea8a..1e99b17767bb 100644
--- a/arch/arm/mach-shmobile/board-lager.c
+++ b/arch/arm/mach-shmobile/board-lager.c
@@ -22,7 +22,6 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
-#include <linux/irqchip.h>
 #include <linux/kernel.h>
 #include <linux/leds.h>
 #include <linux/pinctrl/machine.h>
@@ -103,7 +102,6 @@ static const char *lager_boards_compat_dt[] __initdata = {
 };
 
 DT_MACHINE_START(LAGER_DT, "lager")
-	.init_irq	= irqchip_init,
 	.init_time	= r8a7790_timer_init,
 	.init_machine	= lager_add_standard_devices,
 	.dt_compat	= lager_boards_compat_dt,
-- 
cgit v1.2.2


From 7d6b8883547feacc705c476cdb7f272e309d9fb0 Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Mon, 27 May 2013 18:00:49 +0900
Subject: ARM: shmobile: sh73a0: Remove init_irq declaration in machine
 description

Commit ebafed7a ("ARM: irq: Call irqchip_init if no init_irq function is
specified") removed the need to explictly setup the init_irq field in
the machine description when using only irqchip_init. Remove that
declaration for shmobile as well.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-sh73a0.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index 79a6040774a4..bd9370f26978 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -22,7 +22,6 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/irqchip.h>
 #include <linux/platform_device.h>
 #include <linux/of_platform.h>
 #include <linux/delay.h>
@@ -975,7 +974,6 @@ DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)")
 	.map_io		= sh73a0_map_io,
 	.init_early	= sh73a0_init_delay,
 	.nr_irqs	= NR_IRQS_LEGACY,
-	.init_irq	= irqchip_init,
 	.init_machine	= sh73a0_add_standard_devices_dt,
 	.dt_compat	= sh73a0_boards_compat_dt,
 MACHINE_END
-- 
cgit v1.2.2


From fc492ba58aa6642f34eba716daf6ec4d2715e492 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Mon, 1 Jul 2013 15:01:40 +0900
Subject: ARM: shmobile: kzm9g: Remove init_irq declaration in machine
 description

Remove redundant irqchip_init() callback. The default case
of NULL will result in invoking irqchip_init() anyway.

Signed-off-by: Magnus Damm <damm@opensource.se>
[ horms+renesas@verge.net.au: Trimmed patch to remove portion
  that updates the sh73a0 SoC and altered the subject to
  use the same format as the patch that updates the sh73a0. ]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-kzm9g-reference.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c
index 44055fe8a45c..41092bb01ee5 100644
--- a/arch/arm/mach-shmobile/board-kzm9g-reference.c
+++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c
@@ -24,7 +24,6 @@
 #include <linux/gpio.h>
 #include <linux/io.h>
 #include <linux/irq.h>
-#include <linux/irqchip.h>
 #include <linux/input.h>
 #include <linux/of_platform.h>
 #include <linux/pinctrl/machine.h>
@@ -99,7 +98,6 @@ DT_MACHINE_START(KZM9G_DT, "kzm9g-reference")
 	.map_io		= sh73a0_map_io,
 	.init_early	= sh73a0_init_delay,
 	.nr_irqs	= NR_IRQS_LEGACY,
-	.init_irq	= irqchip_init,
 	.init_machine	= kzm_init,
 	.init_time	= shmobile_timer_init,
 	.dt_compat	= kzm9g_boards_compat_dt,
-- 
cgit v1.2.2


From a597d8df88143f7a409b260b1e89735eb0bdca05 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Mon, 1 Jul 2013 14:41:15 +0900
Subject: ARM: shmobile: Remove unused EMEV2 auxdata and callback

Replace the SoC-specific callback init_machine() with
a NULL to use the default code. This cleans up the code
and reduces the number of lines.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-emev2.c | 10 ----------
 1 file changed, 10 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index 6e8b6ac3c6b2..b0564ce116e5 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -434,15 +434,6 @@ void __init emev2_init_irq(void)
 }
 
 #ifdef CONFIG_USE_OF
-static const struct of_dev_auxdata emev2_auxdata_lookup[] __initconst = {
-	{ }
-};
-
-static void __init emev2_add_standard_devices_dt(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     emev2_auxdata_lookup, NULL);
-}
 
 static const char *emev2_boards_compat_dt[] __initdata = {
 	"renesas,emev2",
@@ -453,7 +444,6 @@ DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)")
 	.smp		= smp_ops(emev2_smp_ops),
 	.init_early	= emev2_init_delay,
 	.nr_irqs	= NR_IRQS_LEGACY,
-	.init_machine	= emev2_add_standard_devices_dt,
 	.dt_compat	= emev2_boards_compat_dt,
 MACHINE_END
 
-- 
cgit v1.2.2


From 88378837780166d67a11142cd6f76596c0a2d8c3 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Mon, 1 Jul 2013 14:41:24 +0900
Subject: ARM: shmobile: Remove unused r8a7740 auxdata table

Pass NULL to of_platform_populate instead of passing
an empty list. This cleans up the code and reduces the
number of lines.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-r8a7740.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 00c5a707238b..ac29c2ee011f 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -986,16 +986,22 @@ void __init r8a7740_add_early_devices(void)
 
 #ifdef CONFIG_USE_OF
 
-static const struct of_dev_auxdata r8a7740_auxdata_lookup[] __initconst = {
-	{ }
-};
+void __init r8a7740_add_early_devices_dt(void)
+{
+	shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
+
+	early_platform_add_devices(r8a7740_early_devices,
+				   ARRAY_SIZE(r8a7740_early_devices));
+
+	/* setup early console here as well */
+	shmobile_setup_console();
+}
 
 void __init r8a7740_add_standard_devices_dt(void)
 {
 	platform_add_devices(r8a7740_devices_dt,
 			    ARRAY_SIZE(r8a7740_devices_dt));
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     r8a7740_auxdata_lookup, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 void __init r8a7740_init_delay(void)
-- 
cgit v1.2.2


From 40216263d3d0b9b46688a28a96daf66fe75caa28 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Mon, 1 Jul 2013 14:41:33 +0900
Subject: ARM: shmobile: Remove unused r8a7778 auxdata and callback

Replace the SoC-specific callback init_machine() with
a NULL to use the default code. This cleans up the code
and reduces the number of lines.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-r8a7778.c | 11 -----------
 1 file changed, 11 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c
index b70bfeef2f6c..2a101ebdedf4 100644
--- a/arch/arm/mach-shmobile/setup-r8a7778.c
+++ b/arch/arm/mach-shmobile/setup-r8a7778.c
@@ -457,16 +457,6 @@ void __init r8a7778_init_irq_dt(void)
 	r8a7778_init_irq_common();
 }
 
-static const struct of_dev_auxdata r8a7778_auxdata_lookup[] __initconst = {
-	{},
-};
-
-void __init r8a7778_add_standard_devices_dt(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     r8a7778_auxdata_lookup, NULL);
-}
-
 static const char *r8a7778_compat_dt[] __initdata = {
 	"renesas,r8a7778",
 	NULL,
@@ -475,7 +465,6 @@ static const char *r8a7778_compat_dt[] __initdata = {
 DT_MACHINE_START(R8A7778_DT, "Generic R8A7778 (Flattened Device Tree)")
 	.init_early	= r8a7778_init_delay,
 	.init_irq	= r8a7778_init_irq_dt,
-	.init_machine	= r8a7778_add_standard_devices_dt,
 	.init_time	= shmobile_timer_init,
 	.dt_compat	= r8a7778_compat_dt,
 	.init_late      = r8a7778_init_late,
-- 
cgit v1.2.2


From 41b0156ca5a1460f8f6dde7e57baf1b80d6a7030 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Mon, 1 Jul 2013 14:41:46 +0900
Subject: ARM: shmobile: Remove unused r8a7779 auxdata table

Pass NULL to of_platform_populate instead of passing
an empty list. This cleans up the code and reduces the
number of lines.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-r8a7779.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index 398687761f50..66d38261ecaa 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -665,10 +665,6 @@ void __init r8a7779_init_delay(void)
 	shmobile_setup_delay(1000, 2, 4); /* Cortex-A9 @ 1000MHz */
 }
 
-static const struct of_dev_auxdata r8a7779_auxdata_lookup[] __initconst = {
-	{},
-};
-
 void __init r8a7779_add_standard_devices_dt(void)
 {
 	/* clocks are setup late during boot in the case of DT */
@@ -676,8 +672,7 @@ void __init r8a7779_add_standard_devices_dt(void)
 
 	platform_add_devices(r8a7779_devices_dt,
 			     ARRAY_SIZE(r8a7779_devices_dt));
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     r8a7779_auxdata_lookup, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static const char *r8a7779_compat_dt[] __initdata = {
-- 
cgit v1.2.2


From 975e5af958916f8b76a8926cd4d50c04936d7079 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Mon, 1 Jul 2013 14:41:55 +0900
Subject: ARM: shmobile: Remove unused sh7372 auxdata table

Pass NULL to of_platform_populate instead of passing
an empty list. This cleans up the code and reduces the
number of lines.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-sh7372.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index 5502d624aca6..13e6fdbde0a5 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -1147,10 +1147,6 @@ void __init sh7372_add_early_devices_dt(void)
 	shmobile_setup_console();
 }
 
-static const struct of_dev_auxdata sh7372_auxdata_lookup[] __initconst = {
-	{ }
-};
-
 void __init sh7372_add_standard_devices_dt(void)
 {
 	/* clocks are setup late during boot in the case of DT */
@@ -1159,8 +1155,7 @@ void __init sh7372_add_standard_devices_dt(void)
 	platform_add_devices(sh7372_early_devices,
 			    ARRAY_SIZE(sh7372_early_devices));
 
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     sh7372_auxdata_lookup, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static const char *sh7372_boards_compat_dt[] __initdata = {
-- 
cgit v1.2.2


From ea31597fe72245985e9d2521ea7e87acf2f14252 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Mon, 1 Jul 2013 14:42:04 +0900
Subject: ARM: shmobile: Remove unused sh73a0 auxdata table

Pass NULL to of_platform_populate instead of passing
an empty list. This cleans up the code and reduces the
number of lines.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-sh73a0.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index bd9370f26978..516c2391b47a 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -944,10 +944,6 @@ void __init sh73a0_add_early_devices(void)
 
 #ifdef CONFIG_USE_OF
 
-static const struct of_dev_auxdata sh73a0_auxdata_lookup[] __initconst = {
-	{},
-};
-
 void __init sh73a0_add_standard_devices_dt(void)
 {
 	struct platform_device_info devinfo = { .name = "cpufreq-cpu0", .id = -1, };
@@ -957,8 +953,7 @@ void __init sh73a0_add_standard_devices_dt(void)
 
 	platform_add_devices(sh73a0_devices_dt,
 			     ARRAY_SIZE(sh73a0_devices_dt));
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     sh73a0_auxdata_lookup, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 
 	/* Instantiate cpufreq-cpu0 */
 	platform_device_register_full(&devinfo);
-- 
cgit v1.2.2


From fdbc45dbbe5a69a2c665630ab577726e01eadf23 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Mon, 1 Jul 2013 14:42:13 +0900
Subject: ARM: shmobile: Remove redundant r8a7790 callback

Replace the SoC-specific callback init_machine() with
a NULL to use the default code. This cleans up the code
and reduces the number of lines.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-r8a7790.c | 5 -----
 1 file changed, 5 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index d405dbd44b07..b7e78b9a7fdf 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -176,10 +176,6 @@ void __init r8a7790_timer_init(void)
 }
 
 #ifdef CONFIG_USE_OF
-void __init r8a7790_add_standard_devices_dt(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
 
 static const char *r8a7790_boards_compat_dt[] __initdata = {
 	"renesas,r8a7790",
@@ -187,7 +183,6 @@ static const char *r8a7790_boards_compat_dt[] __initdata = {
 };
 
 DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)")
-	.init_machine	= r8a7790_add_standard_devices_dt,
 	.init_time	= r8a7790_timer_init,
 	.dt_compat	= r8a7790_boards_compat_dt,
 MACHINE_END
-- 
cgit v1.2.2


From 4146fa8861419ac0d2c3607168339621586f6c03 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Tue, 2 Jul 2013 18:27:33 +0900
Subject: ARM: shmobile: Remove unused EMEV2/KZM9D early console

Remove EMEV2 early console code from KZM9D and instead
rely on console setup during regular platform device
probe time. This makes the DT code and the KZM9D board
support behave the same.

Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-kzm9d.c        |  2 +-
 arch/arm/mach-shmobile/include/mach/emev2.h |  2 +-
 arch/arm/mach-shmobile/setup-emev2.c        | 24 +++---------------------
 3 files changed, 5 insertions(+), 23 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c
index 4368000e1127..15900f1f8af7 100644
--- a/arch/arm/mach-shmobile/board-kzm9d.c
+++ b/arch/arm/mach-shmobile/board-kzm9d.c
@@ -85,7 +85,7 @@ static const char *kzm9d_boards_compat_dt[] __initdata = {
 DT_MACHINE_START(KZM9D_DT, "kzm9d")
 	.smp		= smp_ops(emev2_smp_ops),
 	.map_io		= emev2_map_io,
-	.init_early	= emev2_add_early_devices,
+	.init_early	= emev2_init_delay,
 	.nr_irqs	= NR_IRQS_LEGACY,
 	.init_irq	= emev2_init_irq,
 	.init_machine	= kzm9d_add_standard_devices,
diff --git a/arch/arm/mach-shmobile/include/mach/emev2.h b/arch/arm/mach-shmobile/include/mach/emev2.h
index ac3751705cab..3e0c0441c782 100644
--- a/arch/arm/mach-shmobile/include/mach/emev2.h
+++ b/arch/arm/mach-shmobile/include/mach/emev2.h
@@ -3,7 +3,7 @@
 
 extern void emev2_map_io(void);
 extern void emev2_init_irq(void);
-extern void emev2_add_early_devices(void);
+extern void emev2_init_delay(void);
 extern void emev2_add_standard_devices(void);
 extern void emev2_clock_init(void);
 extern void emev2_set_boot_vector(unsigned long value);
diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index b0564ce116e5..f6edd190a6b4 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -375,14 +375,11 @@ static struct platform_device pmu_device = {
 	.resource	= pmu_resources,
 };
 
-static struct platform_device *emev2_early_devices[] __initdata = {
+static struct platform_device *emev2_devices[] __initdata = {
 	&uart0_device,
 	&uart1_device,
 	&uart2_device,
 	&uart3_device,
-};
-
-static struct platform_device *emev2_late_devices[] __initdata = {
 	&sti_device,
 	&gio0_device,
 	&gio1_device,
@@ -396,29 +393,14 @@ void __init emev2_add_standard_devices(void)
 {
 	emev2_clock_init();
 
-	platform_add_devices(emev2_early_devices,
-			     ARRAY_SIZE(emev2_early_devices));
-
-	platform_add_devices(emev2_late_devices,
-			     ARRAY_SIZE(emev2_late_devices));
+	platform_add_devices(emev2_devices, ARRAY_SIZE(emev2_devices));
 }
 
-static void __init emev2_init_delay(void)
+void __init emev2_init_delay(void)
 {
 	shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */
 }
 
-void __init emev2_add_early_devices(void)
-{
-	emev2_init_delay();
-
-	early_platform_add_devices(emev2_early_devices,
-				   ARRAY_SIZE(emev2_early_devices));
-
-	/* setup early console here as well */
-	shmobile_setup_console();
-}
-
 void __init emev2_init_irq(void)
 {
 	void __iomem *gic_dist_base;
-- 
cgit v1.2.2


From 210e179da2e39c965872b941a36e55ab78328e49 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Tue, 2 Jul 2013 18:27:49 +0900
Subject: ARM: shmobile: Make EMEV2 platform devices more compact

Convert the EMEV2 SoC device setup code from using very
verbose resources and static platform devices to the
same style as more recent boards. This reduces the size
of the code.

Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-emev2.c | 321 +++++++----------------------------
 1 file changed, 61 insertions(+), 260 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index f6edd190a6b4..e4b46930db52 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -62,102 +62,40 @@ void __init emev2_map_io(void)
 
 /* UART */
 static struct resource uart0_resources[] = {
-	[0]	= {
-		.start	= 0xe1020000,
-		.end	= 0xe1020037,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1]	= {
-		.start	= 40,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device uart0_device = {
-	.name		= "serial8250-em",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(uart0_resources),
-	.resource	= uart0_resources,
+	DEFINE_RES_MEM(0xe1020000, 0x38),
+	DEFINE_RES_IRQ(40),
 };
 
 static struct resource uart1_resources[] = {
-	[0]	= {
-		.start	= 0xe1030000,
-		.end	= 0xe1030037,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1]	= {
-		.start	= 41,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device uart1_device = {
-	.name		= "serial8250-em",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(uart1_resources),
-	.resource	= uart1_resources,
+	DEFINE_RES_MEM(0xe1030000, 0x38),
+	DEFINE_RES_IRQ(41),
 };
 
 static struct resource uart2_resources[] = {
-	[0]	= {
-		.start	= 0xe1040000,
-		.end	= 0xe1040037,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1]	= {
-		.start	= 42,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device uart2_device = {
-	.name		= "serial8250-em",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(uart2_resources),
-	.resource	= uart2_resources,
+	DEFINE_RES_MEM(0xe1040000, 0x38),
+	DEFINE_RES_IRQ(42),
 };
 
 static struct resource uart3_resources[] = {
-	[0]	= {
-		.start	= 0xe1050000,
-		.end	= 0xe1050037,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1]	= {
-		.start	= 43,
-		.flags	= IORESOURCE_IRQ,
-	}
+	DEFINE_RES_MEM(0xe1050000, 0x38),
+	DEFINE_RES_IRQ(43),
 };
 
-static struct platform_device uart3_device = {
-	.name		= "serial8250-em",
-	.id		= 3,
-	.num_resources	= ARRAY_SIZE(uart3_resources),
-	.resource	= uart3_resources,
-};
+#define emev2_register_uart(idx)					\
+	platform_device_register_simple("serial8250-em", idx,		\
+					uart##idx##_resources,		\
+					ARRAY_SIZE(uart##idx##_resources))
 
 /* STI */
 static struct resource sti_resources[] = {
-	[0] = {
-		.name	= "STI",
-		.start	= 0xe0180000,
-		.end	= 0xe0180053,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 157,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sti_device = {
-	.name		= "em_sti",
-	.id		= 0,
-	.resource	= sti_resources,
-	.num_resources	= ARRAY_SIZE(sti_resources),
+	DEFINE_RES_MEM(0xe0180000, 0x54),
+	DEFINE_RES_IRQ(157),
 };
 
+#define emev2_register_sti()					\
+	platform_device_register_simple("em_sti", 0,		\
+					sti_resources,		\
+					ARRAY_SIZE(sti_resources))
 
 /* GIO */
 static struct gpio_em_config gio0_config = {
@@ -167,36 +105,10 @@ static struct gpio_em_config gio0_config = {
 };
 
 static struct resource gio0_resources[] = {
-	[0] = {
-		.name	= "GIO_000",
-		.start	= 0xe0050000,
-		.end	= 0xe005002b,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "GIO_000",
-		.start	= 0xe0050040,
-		.end	= 0xe005005f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= 99,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= 100,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device gio0_device = {
-	.name		= "em_gio",
-	.id		= 0,
-	.resource	= gio0_resources,
-	.num_resources	= ARRAY_SIZE(gio0_resources),
-	.dev		= {
-		.platform_data	= &gio0_config,
-	},
+	DEFINE_RES_MEM(0xe0050000, 0x2c),
+	DEFINE_RES_MEM(0xe0050040, 0x20),
+	DEFINE_RES_IRQ(99),
+	DEFINE_RES_IRQ(100),
 };
 
 static struct gpio_em_config gio1_config = {
@@ -206,36 +118,10 @@ static struct gpio_em_config gio1_config = {
 };
 
 static struct resource gio1_resources[] = {
-	[0] = {
-		.name	= "GIO_032",
-		.start	= 0xe0050080,
-		.end	= 0xe00500ab,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "GIO_032",
-		.start	= 0xe00500c0,
-		.end	= 0xe00500df,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= 101,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= 102,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device gio1_device = {
-	.name		= "em_gio",
-	.id		= 1,
-	.resource	= gio1_resources,
-	.num_resources	= ARRAY_SIZE(gio1_resources),
-	.dev		= {
-		.platform_data	= &gio1_config,
-	},
+	DEFINE_RES_MEM(0xe0050080, 0x2c),
+	DEFINE_RES_MEM(0xe00500c0, 0x20),
+	DEFINE_RES_IRQ(101),
+	DEFINE_RES_IRQ(102),
 };
 
 static struct gpio_em_config gio2_config = {
@@ -245,36 +131,10 @@ static struct gpio_em_config gio2_config = {
 };
 
 static struct resource gio2_resources[] = {
-	[0] = {
-		.name	= "GIO_064",
-		.start	= 0xe0050100,
-		.end	= 0xe005012b,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "GIO_064",
-		.start	= 0xe0050140,
-		.end	= 0xe005015f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= 103,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= 104,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device gio2_device = {
-	.name		= "em_gio",
-	.id		= 2,
-	.resource	= gio2_resources,
-	.num_resources	= ARRAY_SIZE(gio2_resources),
-	.dev		= {
-		.platform_data	= &gio2_config,
-	},
+	DEFINE_RES_MEM(0xe0050100, 0x2c),
+	DEFINE_RES_MEM(0xe0050140, 0x20),
+	DEFINE_RES_IRQ(103),
+	DEFINE_RES_IRQ(104),
 };
 
 static struct gpio_em_config gio3_config = {
@@ -284,36 +144,10 @@ static struct gpio_em_config gio3_config = {
 };
 
 static struct resource gio3_resources[] = {
-	[0] = {
-		.name	= "GIO_096",
-		.start	= 0xe0050180,
-		.end	= 0xe00501ab,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "GIO_096",
-		.start	= 0xe00501c0,
-		.end	= 0xe00501df,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= 105,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= 106,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device gio3_device = {
-	.name		= "em_gio",
-	.id		= 3,
-	.resource	= gio3_resources,
-	.num_resources	= ARRAY_SIZE(gio3_resources),
-	.dev		= {
-		.platform_data	= &gio3_config,
-	},
+	DEFINE_RES_MEM(0xe0050180, 0x2c),
+	DEFINE_RES_MEM(0xe00501c0, 0x20),
+	DEFINE_RES_IRQ(105),
+	DEFINE_RES_IRQ(106),
 };
 
 static struct gpio_em_config gio4_config = {
@@ -323,77 +157,44 @@ static struct gpio_em_config gio4_config = {
 };
 
 static struct resource gio4_resources[] = {
-	[0] = {
-		.name	= "GIO_128",
-		.start	= 0xe0050200,
-		.end	= 0xe005022b,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "GIO_128",
-		.start	= 0xe0050240,
-		.end	= 0xe005025f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= 107,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= 108,
-		.flags	= IORESOURCE_IRQ,
-	},
+	DEFINE_RES_MEM(0xe0050200, 0x2c),
+	DEFINE_RES_MEM(0xe0050240, 0x20),
+	DEFINE_RES_IRQ(107),
+	DEFINE_RES_IRQ(108),
 };
 
-static struct platform_device gio4_device = {
-	.name		= "em_gio",
-	.id		= 4,
-	.resource	= gio4_resources,
-	.num_resources	= ARRAY_SIZE(gio4_resources),
-	.dev		= {
-		.platform_data	= &gio4_config,
-	},
-};
+#define emev2_register_gio(idx)						\
+	platform_device_register_resndata(&platform_bus, "em_gio",	\
+					  idx, gio##idx##_resources,	\
+					  ARRAY_SIZE(gio##idx##_resources), \
+					  &gio##idx##_config,		\
+					  sizeof(struct gpio_em_config))
 
 static struct resource pmu_resources[] = {
-	[0] = {
-		.start	= 152,
-		.end	= 152,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start	= 153,
-		.end	= 153,
-		.flags	= IORESOURCE_IRQ,
-	},
+	DEFINE_RES_IRQ(152),
+	DEFINE_RES_IRQ(153),
 };
 
-static struct platform_device pmu_device = {
-	.name		= "arm-pmu",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pmu_resources),
-	.resource	= pmu_resources,
-};
-
-static struct platform_device *emev2_devices[] __initdata = {
-	&uart0_device,
-	&uart1_device,
-	&uart2_device,
-	&uart3_device,
-	&sti_device,
-	&gio0_device,
-	&gio1_device,
-	&gio2_device,
-	&gio3_device,
-	&gio4_device,
-	&pmu_device,
-};
+#define emev2_register_pmu()					\
+	platform_device_register_simple("arm-pmu", -1,		\
+					pmu_resources,		\
+					ARRAY_SIZE(pmu_resources))
 
 void __init emev2_add_standard_devices(void)
 {
 	emev2_clock_init();
 
-	platform_add_devices(emev2_devices, ARRAY_SIZE(emev2_devices));
+	emev2_register_uart(0);
+	emev2_register_uart(1);
+	emev2_register_uart(2);
+	emev2_register_uart(3);
+	emev2_register_sti();
+	emev2_register_gio(0);
+	emev2_register_gio(1);
+	emev2_register_gio(2);
+	emev2_register_gio(3);
+	emev2_register_gio(4);
+	emev2_register_pmu();
 }
 
 void __init emev2_init_delay(void)
-- 
cgit v1.2.2


From 09cb2e366737ac70f1d7c6c0a3747a75c8f90f1e Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Mon, 8 Jul 2013 15:20:05 +0900
Subject: ARM: shmobile: Fix EMEV2 clock comment typo

Update the STI timer frequency comment to 32.768 kHz to
fix 37 kHz typo.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-emev2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/clock-emev2.c b/arch/arm/mach-shmobile/clock-emev2.c
index 4710f1847bb7..56dd0cfcddc7 100644
--- a/arch/arm/mach-shmobile/clock-emev2.c
+++ b/arch/arm/mach-shmobile/clock-emev2.c
@@ -221,7 +221,7 @@ void __init emev2_clock_init(void)
 	smu_base = ioremap(EMEV2_SMU_BASE, PAGE_SIZE);
 	BUG_ON(!smu_base);
 
-	/* setup STI timer to run on 37.768 kHz and deassert reset */
+	/* setup STI timer to run on 32.768 kHz and deassert reset */
 	emev2_smu_write(0, STI_CLKSEL);
 	emev2_smu_write(1, STI_RSTCTRL);
 
-- 
cgit v1.2.2


From 54aa4c48bc0d364565e7d1c722b07314efdc2a10 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Date: Tue, 9 Jul 2013 01:48:34 -0700
Subject: ARM: shmobile: r8a7778: remove r8a7778_init_irq()

This patch removes r8a7778_init_irq(), since no-one is using it.
And now, there is no reason to have r8a7778_init_irq_common().
r8a7778_init_irq_dt() includes it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/include/mach/r8a7778.h |  1 -
 arch/arm/mach-shmobile/setup-r8a7778.c        | 37 +++++++--------------------
 2 files changed, 9 insertions(+), 29 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/include/mach/r8a7778.h b/arch/arm/mach-shmobile/include/mach/r8a7778.h
index 851d027a2f06..9b561bf4229f 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7778.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7778.h
@@ -33,7 +33,6 @@ extern void r8a7778_add_mmc_device(struct sh_mmcif_plat_data *info);
 
 extern void r8a7778_init_late(void);
 extern void r8a7778_init_delay(void);
-extern void r8a7778_init_irq(void);
 extern void r8a7778_init_irq_dt(void);
 extern void r8a7778_clock_init(void);
 extern void r8a7778_init_irq_extpin(int irlm);
diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c
index 2a101ebdedf4..a3a2e37b03f3 100644
--- a/arch/arm/mach-shmobile/setup-r8a7778.c
+++ b/arch/arm/mach-shmobile/setup-r8a7778.c
@@ -408,17 +408,25 @@ void __init r8a7778_init_irq_extpin(int irlm)
 			&irqpin_platform_data, sizeof(irqpin_platform_data));
 }
 
+void __init r8a7778_init_delay(void)
+{
+	shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
+}
+
+#ifdef CONFIG_USE_OF
 #define INT2SMSKCR0	0x82288 /* 0xfe782288 */
 #define INT2SMSKCR1	0x8228c /* 0xfe78228c */
 
 #define INT2NTSR0	0x00018 /* 0xfe700018 */
 #define INT2NTSR1	0x0002c /* 0xfe70002c */
-static void __init r8a7778_init_irq_common(void)
+void __init r8a7778_init_irq_dt(void)
 {
 	void __iomem *base = ioremap_nocache(0xfe700000, 0x00100000);
 
 	BUG_ON(!base);
 
+	irqchip_init();
+
 	/* route all interrupts to ARM */
 	__raw_writel(0x73ffffff, base + INT2NTSR0);
 	__raw_writel(0xffffffff, base + INT2NTSR1);
@@ -430,33 +438,6 @@ static void __init r8a7778_init_irq_common(void)
 	iounmap(base);
 }
 
-void __init r8a7778_init_irq(void)
-{
-	void __iomem *gic_dist_base;
-	void __iomem *gic_cpu_base;
-
-	gic_dist_base = ioremap_nocache(0xfe438000, PAGE_SIZE);
-	gic_cpu_base  = ioremap_nocache(0xfe430000, PAGE_SIZE);
-	BUG_ON(!gic_dist_base || !gic_cpu_base);
-
-	/* use GIC to handle interrupts */
-	gic_init(0, 29, gic_dist_base, gic_cpu_base);
-
-	r8a7778_init_irq_common();
-}
-
-void __init r8a7778_init_delay(void)
-{
-	shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
-}
-
-#ifdef CONFIG_USE_OF
-void __init r8a7778_init_irq_dt(void)
-{
-	irqchip_init();
-	r8a7778_init_irq_common();
-}
-
 static const char *r8a7778_compat_dt[] __initdata = {
 	"renesas,r8a7778",
 	NULL,
-- 
cgit v1.2.2


From ebd9616f439a8a46b9dca9a272b342f34c5f3614 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Tue, 9 Jul 2013 19:40:16 +0900
Subject: ARM: shmobile: Remove unused mach/dma.h

Remove mach-shmobile mach/dma.h since it only
seems to be used on non-mach-shmobile platforms.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/include/mach/dma.h | 1 -
 1 file changed, 1 deletion(-)
 delete mode 100644 arch/arm/mach-shmobile/include/mach/dma.h

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/include/mach/dma.h b/arch/arm/mach-shmobile/include/mach/dma.h
deleted file mode 100644
index 40a8c178f10d..000000000000
--- a/arch/arm/mach-shmobile/include/mach/dma.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
-- 
cgit v1.2.2


From 14bd03e08831a52035e601ae85b05a4849214ec4 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Date: Thu, 4 Jul 2013 21:13:27 +0200
Subject: ARM: mach-shmobile: mackerel: Use gpio-backlight

Replace the backlight callback with a gpio-backlight platform device.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-mackerel.c | 34 ++++++++++++++++-----------------
 1 file changed, 17 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 85f51a849a50..af06753eb809 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -41,6 +41,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/sh_flctl.h>
 #include <linux/pinctrl/machine.h>
+#include <linux/platform_data/gpio_backlight.h>
 #include <linux/pm_clock.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
@@ -49,7 +50,6 @@
 #include <linux/tca6416_keypad.h>
 #include <linux/usb/renesas_usbhs.h>
 #include <linux/dma-mapping.h>
-
 #include <video/sh_mobile_hdmi.h>
 #include <video/sh_mobile_lcdc.h>
 #include <media/sh_mobile_ceu.h>
@@ -346,7 +346,7 @@ static struct platform_device meram_device = {
 	},
 };
 
-/* LCDC */
+/* LCDC and backlight */
 static struct fb_videomode mackerel_lcdc_modes[] = {
 	{
 		.name		= "WVGA Panel",
@@ -362,13 +362,6 @@ static struct fb_videomode mackerel_lcdc_modes[] = {
 	},
 };
 
-static int mackerel_set_brightness(int brightness)
-{
-	gpio_set_value(31, brightness);
-
-	return 0;
-}
-
 static const struct sh_mobile_meram_cfg lcd_meram_cfg = {
 	.icb[0] = {
 		.meram_size     = 0x40,
@@ -393,11 +386,6 @@ static struct sh_mobile_lcdc_info lcdc_info = {
 			.width		= 152,
 			.height		= 91,
 		},
-		.bl_info = {
-			.name = "sh_mobile_lcdc_bl",
-			.max_brightness = 1,
-			.set_brightness = mackerel_set_brightness,
-		},
 		.meram_cfg = &lcd_meram_cfg,
 	}
 };
@@ -425,6 +413,20 @@ static struct platform_device lcdc_device = {
 	},
 };
 
+static struct gpio_backlight_platform_data gpio_backlight_data = {
+	.fbdev = &lcdc_device.dev,
+	.gpio = 31,
+	.def_value = 1,
+	.name = "backlight",
+};
+
+static struct platform_device gpio_backlight_device = {
+	.name = "gpio-backlight",
+	.dev = {
+		.platform_data = &gpio_backlight_data,
+	},
+};
+
 /* HDMI */
 static struct sh_mobile_hdmi_info hdmi_info = {
 	.flags		= HDMI_SND_SRC_SPDIF,
@@ -1231,6 +1233,7 @@ static struct platform_device *mackerel_devices[] __initdata = {
 	&nor_flash_device,
 	&smc911x_device,
 	&lcdc_device,
+	&gpio_backlight_device,
 	&usbhs0_device,
 	&usbhs1_device,
 	&leds_device,
@@ -1441,9 +1444,6 @@ static void __init mackerel_init(void)
 				  ARRAY_SIZE(mackerel_pinctrl_map));
 	sh7372_pinmux_init();
 
-	/* backlight, off by default */
-	gpio_request_one(31, GPIOF_OUT_INIT_LOW, NULL);
-
 	gpio_request_one(151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
 
 	/* USBHS0 */
-- 
cgit v1.2.2


From fe79f919f47eabf6eae08414dcc078b0d89dfd8e Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Date: Thu, 4 Jul 2013 21:13:28 +0200
Subject: sh: ecovec24: Use gpio-backlight

Replace the backlight callback with a gpio-backlight platform device.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/sh/boards/mach-ecovec24/setup.c | 37 +++++++++++++++++++-----------------
 1 file changed, 20 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 61fade0ffa96..bcbb86bd659e 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -30,6 +30,7 @@
 #include <linux/spi/mmc_spi.h>
 #include <linux/input.h>
 #include <linux/input/sh_keysc.h>
+#include <linux/platform_data/gpio_backlight.h>
 #include <linux/sh_eth.h>
 #include <linux/sh_intc.h>
 #include <linux/videodev2.h>
@@ -303,7 +304,7 @@ static struct platform_device usbhs_device = {
 	.resource	= usbhs_resources,
 };
 
-/* LCDC */
+/* LCDC and backlight */
 static const struct fb_videomode ecovec_lcd_modes[] = {
 	{
 		.name		= "Panel",
@@ -334,13 +335,6 @@ static const struct fb_videomode ecovec_dvi_modes[] = {
 	},
 };
 
-static int ecovec24_set_brightness(int brightness)
-{
-	gpio_set_value(GPIO_PTR1, brightness);
-
-	return 0;
-}
-
 static struct sh_mobile_lcdc_info lcdc_info = {
 	.ch[0] = {
 		.interface_type = RGB18,
@@ -350,11 +344,6 @@ static struct sh_mobile_lcdc_info lcdc_info = {
 			.width = 152,
 			.height = 91,
 		},
-		.bl_info = {
-			.name = "sh_mobile_lcdc_bl",
-			.max_brightness = 1,
-			.set_brightness = ecovec24_set_brightness,
-		},
 	}
 };
 
@@ -380,6 +369,20 @@ static struct platform_device lcdc_device = {
 	},
 };
 
+static struct gpio_backlight_platform_data gpio_backlight_data = {
+	.fbdev = &lcdc_device.dev,
+	.gpio = GPIO_PTR1,
+	.def_value = 1,
+	.name = "backlight",
+};
+
+static struct platform_device gpio_backlight_device = {
+	.name = "gpio-backlight",
+	.dev = {
+		.platform_data = &gpio_backlight_data,
+	},
+};
+
 /* CEU0 */
 static struct sh_mobile_ceu_info sh_mobile_ceu0_info = {
 	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
@@ -1049,6 +1052,7 @@ static struct platform_device *ecovec_devices[] __initdata = {
 	&usb1_common_device,
 	&usbhs_device,
 	&lcdc_device,
+	&gpio_backlight_device,
 	&ceu0_device,
 	&ceu1_device,
 	&keysc_device,
@@ -1239,11 +1243,9 @@ static int __init arch_setup(void)
 
 	gpio_request(GPIO_PTE6, NULL);
 	gpio_request(GPIO_PTU1, NULL);
-	gpio_request(GPIO_PTR1, NULL);
 	gpio_request(GPIO_PTA2, NULL);
 	gpio_direction_input(GPIO_PTE6);
 	gpio_direction_output(GPIO_PTU1, 0);
-	gpio_direction_output(GPIO_PTR1, 0);
 	gpio_direction_output(GPIO_PTA2, 0);
 
 	/* I/O buffer drive ability is high */
@@ -1256,6 +1258,9 @@ static int __init arch_setup(void)
 		lcdc_info.ch[0].lcd_modes		= ecovec_dvi_modes;
 		lcdc_info.ch[0].num_modes		= ARRAY_SIZE(ecovec_dvi_modes);
 
+		/* No backlight */
+		gpio_backlight_data.fbdev = NULL;
+
 		gpio_set_value(GPIO_PTA2, 1);
 		gpio_set_value(GPIO_PTU1, 1);
 	} else {
@@ -1265,8 +1270,6 @@ static int __init arch_setup(void)
 		lcdc_info.ch[0].lcd_modes		= ecovec_lcd_modes;
 		lcdc_info.ch[0].num_modes		= ARRAY_SIZE(ecovec_lcd_modes);
 
-		gpio_set_value(GPIO_PTR1, 1);
-
 		/* FIXME
 		 *
 		 * LCDDON control is needed for Panel,
-- 
cgit v1.2.2


From 3f3bee2e31f6fbf8ac09b58b8e87374d24387cef Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Date: Thu, 4 Jul 2013 21:13:29 +0200
Subject: sh: kfr2r09: Use lv5207lp backlight

Replace the backlight callback with a lv5207lp backlight platform
device.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/sh/boards/mach-kfr2r09/lcd_wqvga.c     | 48 -----------------------------
 arch/sh/boards/mach-kfr2r09/setup.c         | 19 +++++++++---
 arch/sh/include/mach-kfr2r09/mach/kfr2r09.h |  2 --
 3 files changed, 14 insertions(+), 55 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c b/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
index c62050332629..355a78a3b313 100644
--- a/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
+++ b/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
@@ -276,51 +276,3 @@ void kfr2r09_lcd_start(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so)
 {
 	write_memory_start(sohandle, so);
 }
-
-#define CTRL_CKSW       0x10
-#define CTRL_C10        0x20
-#define CTRL_CPSW       0x80
-#define MAIN_MLED4      0x40
-#define MAIN_MSW        0x80
-
-int kfr2r09_lcd_set_brightness(int brightness)
-{
-	struct i2c_adapter *a;
-	struct i2c_msg msg;
-	unsigned char buf[2];
-	int ret;
-
-	a = i2c_get_adapter(0);
-	if (!a)
-		return -ENODEV;
-
-	buf[0] = 0x00;
-	if (brightness)
-		buf[1] = CTRL_CPSW | CTRL_C10 | CTRL_CKSW;
-	else
-		buf[1] = 0;
-
-	msg.addr = 0x75;
-	msg.buf = buf;
-	msg.len = 2;
-	msg.flags = 0;
-	ret = i2c_transfer(a, &msg, 1);
-	if (ret != 1)
-		return -ENODEV;
-
-	buf[0] = 0x01;
-	if (brightness)
-		buf[1] = MAIN_MSW | MAIN_MLED4 | 0x0c;
-	else
-		buf[1] = 0;
-
-	msg.addr = 0x75;
-	msg.buf = buf;
-	msg.len = 2;
-	msg.flags = 0;
-	ret = i2c_transfer(a, &msg, 1);
-	if (ret != 1)
-		return -ENODEV;
-
-	return 0;
-}
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
index ab502f12ef57..1df4398f8375 100644
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -21,6 +21,7 @@
 #include <linux/input.h>
 #include <linux/input/sh_keysc.h>
 #include <linux/i2c.h>
+#include <linux/platform_data/lv5207lp.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/usb/r8a66597.h>
@@ -159,11 +160,6 @@ static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = {
 			.setup_sys = kfr2r09_lcd_setup,
 			.start_transfer = kfr2r09_lcd_start,
 		},
-		.bl_info = {
-			.name = "sh_mobile_lcdc_bl",
-			.max_brightness = 1,
-			.set_brightness = kfr2r09_lcd_set_brightness,
-		},
 		.sys_bus_cfg = {
 			.ldmt2r = 0x07010904,
 			.ldmt3r = 0x14012914,
@@ -195,6 +191,17 @@ static struct platform_device kfr2r09_sh_lcdc_device = {
 	},
 };
 
+static struct lv5207lp_platform_data kfr2r09_backlight_data = {
+	.fbdev = &kfr2r09_sh_lcdc_device.dev,
+	.def_value = 13,
+	.max_value = 13,
+};
+
+static struct i2c_board_info kfr2r09_backlight_board_info = {
+	I2C_BOARD_INFO("lv5207lp", 0x75),
+	.platform_data = &kfr2r09_backlight_data,
+};
+
 static struct r8a66597_platdata kfr2r09_usb0_gadget_data = {
 	.on_chip = 1,
 };
@@ -627,6 +634,8 @@ static int __init kfr2r09_devices_setup(void)
 	gpio_request(GPIO_FN_SDHI0CMD, NULL);
 	gpio_request(GPIO_FN_SDHI0CLK, NULL);
 
+	i2c_register_board_info(0, &kfr2r09_backlight_board_info, 1);
+
 	return platform_add_devices(kfr2r09_devices,
 				    ARRAY_SIZE(kfr2r09_devices));
 }
diff --git a/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h b/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h
index c20c9e5f5eab..79f154e5cb9c 100644
--- a/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h
+++ b/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h
@@ -4,13 +4,11 @@
 #include <video/sh_mobile_lcdc.h>
 
 #if defined(CONFIG_FB_SH_MOBILE_LCDC) || defined(CONFIG_FB_SH_MOBILE_LCDC_MODULE)
-int kfr2r09_lcd_set_brightness(int brightness);
 int kfr2r09_lcd_setup(void *sys_ops_handle,
 		      struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
 void kfr2r09_lcd_start(void *sys_ops_handle,
 		       struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
 #else
-static int kfr2r09_lcd_set_brightness(int brightness) {}
 static int kfr2r09_lcd_setup(void *sys_ops_handle,
 				struct sh_mobile_lcdc_sys_bus_ops *sys_ops)
 {
-- 
cgit v1.2.2


From 0fb19cdabfc3f8884bac53fd81b02bf61c7904af Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Date: Thu, 4 Jul 2013 21:13:30 +0200
Subject: ARM: mach-shmobile: ag5evm: Use bd6107 backlight driver

Replace the backlight callback with a bd6107 backlight platform device.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-ag5evm.c | 65 +++++++++--------------------------
 1 file changed, 16 insertions(+), 49 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index c7540710906f..f6d64495c405 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -41,6 +41,7 @@
 #include <linux/mmc/sh_mmcif.h>
 #include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/mfd/tmio.h>
+#include <linux/platform_data/bd6107.h>
 #include <linux/sh_clk.h>
 #include <linux/irqchip/arm-gic.h>
 #include <video/sh_mobile_lcdc.h>
@@ -291,47 +292,7 @@ static struct platform_device mipidsi0_device = {
 	},
 };
 
-static unsigned char lcd_backlight_seq[3][2] = {
-	{ 0x04, 0x07 },
-	{ 0x23, 0x80 },
-	{ 0x03, 0x01 },
-};
-
-static int lcd_backlight_set_brightness(int brightness)
-{
-	struct i2c_adapter *adap;
-	struct i2c_msg msg;
-	unsigned int i;
-	int ret;
-
-	if (brightness == 0) {
-		/* Reset the chip */
-		gpio_set_value(235, 0);
-		mdelay(24);
-		gpio_set_value(235, 1);
-		return 0;
-	}
-
-	adap = i2c_get_adapter(1);
-	if (adap == NULL)
-		return -ENODEV;
-
-	for (i = 0; i < ARRAY_SIZE(lcd_backlight_seq); i++) {
-		msg.addr = 0x6d;
-		msg.buf = &lcd_backlight_seq[i][0];
-		msg.len = 2;
-		msg.flags = 0;
-
-		ret = i2c_transfer(adap, &msg, 1);
-		if (ret < 0)
-			break;
-	}
-
-	i2c_put_adapter(adap);
-	return ret < 0 ? ret : 0;
-}
-
-/* LCDC0 */
+/* LCDC0 and backlight */
 static const struct fb_videomode lcdc0_modes[] = {
 	{
 		.name		= "R63302(QHD)",
@@ -361,11 +322,6 @@ static struct sh_mobile_lcdc_info lcdc0_info = {
 			.width = 44,
 			.height = 79,
 		},
-		.bl_info = {
-			.name = "sh_mobile_lcdc_bl",
-			.max_brightness = 1,
-			.set_brightness = lcd_backlight_set_brightness,
-		},
 		.tx_dev = &mipidsi0_device,
 	}
 };
@@ -394,6 +350,17 @@ static struct platform_device lcdc0_device = {
 	},
 };
 
+static struct bd6107_platform_data backlight_data = {
+	.fbdev = &lcdc0_device.dev,
+	.reset = 235,
+	.def_value = 0,
+};
+
+static struct i2c_board_info backlight_board_info = {
+	I2C_BOARD_INFO("bd6107", 0x6d),
+	.platform_data = &backlight_data,
+};
+
 /* Fixed 2.8V regulators to be used by SDHI0 */
 static struct regulator_consumer_supply fixed2v8_power_consumers[] =
 {
@@ -648,15 +615,15 @@ static void __init ag5evm_init(void)
 	gpio_set_value(217, 1);
 	mdelay(100);
 
-	/* LCD backlight controller */
-	gpio_request_one(235, GPIOF_OUT_INIT_LOW, NULL); /* RESET */
-	lcd_backlight_set_brightness(0);
 
 #ifdef CONFIG_CACHE_L2X0
 	/* Shared attribute override enable, 64K*8way */
 	l2x0_init(IOMEM(0xf0100000), 0x00460000, 0xc2000fff);
 #endif
 	sh73a0_add_standard_devices();
+
+	i2c_register_board_info(1, &backlight_board_info, 1);
+
 	platform_add_devices(ag5evm_devices, ARRAY_SIZE(ag5evm_devices));
 }
 
-- 
cgit v1.2.2


From f98c1069bf1748ffa18cbebbc3a9f88dfc19a631 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Thu, 27 Jun 2013 11:47:57 +0200
Subject: ARM: shmobile: r8a73a4: add I2C controller DT nodes

Add Device Tree nodes for the 9 I2C controllers on r8a73a4, compatible with
the i2c-sh_mobile.c driver.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a73a4.dtsi | 81 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 81 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index 4ff2019c0e30..4e1ddf0d129c 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -85,4 +85,85 @@
 		interrupt-parent = <&gic>;
 		interrupts = <0 69 4>;
 	};
+
+	i2c0: i2c@e6500000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe6500000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 174 0x4>;
+	};
+
+	i2c1: i2c@e6510000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe6510000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 175 0x4>;
+	};
+
+	i2c2: i2c@e6520000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe6520000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 176 0x4>;
+	};
+
+	i2c3: i2c@e6530000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe6530000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 177 0x4>;
+	};
+
+	i2c4: i2c@e6540000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe6540000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 178 0x4>;
+	};
+
+	i2c5: i2c@e60b0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe60b0000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 179 0x4>;
+	};
+
+	i2c6: i2c@e6550000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe6550000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 184 0x4>;
+	};
+
+	i2c7: i2c@e6560000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe6560000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 185 0x4>;
+	};
+
+	i2c8: i2c@e6570000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe6570000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 173 0x4>;
+	};
 };
-- 
cgit v1.2.2


From 463a2432a435ea3eda4714626f231b7b22f0ac3d Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Thu, 27 Jun 2013 11:47:58 +0200
Subject: ARM: shmobile: ape6evm: add CPUFreq support

This patch adds OPPs to the CA15 DT node and a max8973 DT node to support
clock and voltage scaling, using the cpufreq-cpu0 CPUFreq driver.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a73a4-ape6evm.dts | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
index f603c6946c29..e657a9db1666 100644
--- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts
+++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
@@ -50,3 +50,25 @@
 		};
 	};
 };
+
+&i2c5 {
+	vdd_dvfs: max8973@1b {
+		compatible = "maxim,max8973";
+		reg = <0x1b>;
+
+		regulator-min-microvolt = <935000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_dvfs>;
+	operating-points = <
+		/* kHz  uV */
+		1950000 1115000
+		1462500  995000
+	>;
+	voltage-tolerance = <1>; /* 1% */
+};
-- 
cgit v1.2.2


From 8f675493f4706a9f92a822121fe38892a08e0161 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Tue, 2 Jul 2013 18:27:41 +0900
Subject: ARM: shmobile: Update KZM9D dts command line

Update the KZM9D DTS command line to remove following cruft:
 - console=tty0 - no graphic support upstream anyway
 - earlyprintk= - not supported by the 8250-em driver anyway
 - mem= - this is provided via DT anyway

Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/emev2-kzm9d.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts
index b9b3241f173b..dda13bc02f9f 100644
--- a/arch/arm/boot/dts/emev2-kzm9d.dts
+++ b/arch/arm/boot/dts/emev2-kzm9d.dts
@@ -21,6 +21,6 @@
 	};
 
 	chosen {
-		bootargs = "console=tty0 console=ttyS1,115200n81 earlyprintk=serial8250-em.1,115200n81 mem=128M@0x40000000 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096";
+		bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096";
 	};
 };
-- 
cgit v1.2.2


From 12d035b13b224ee69886b64fd33d1c1224e79187 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Tue, 2 Jul 2013 18:27:57 +0900
Subject: ARM: shmobile: Add GIO to EMEV2 dtsi

Add GIO0->GIO4 device nodes to the EMEV2 dtsi file.

Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/emev2.dtsi | 59 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 59 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi
index c8a8c08b48dd..99ad2b2e8e14 100644
--- a/arch/arm/boot/dts/emev2.dtsi
+++ b/arch/arm/boot/dts/emev2.dtsi
@@ -14,6 +14,14 @@
 	compatible = "renesas,emev2";
 	interrupt-parent = <&gic>;
 
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -67,4 +75,55 @@
 		reg = <0xe1050000 0x38>;
 		interrupts = <0 11 0>;
 	};
+
+	gpio0: gpio@e0050000 {
+		compatible = "renesas,em-gio";
+		reg = <0xe0050000 0x2c>, <0xe0050040 0x20>;
+		interrupts = <0 67 0>, <0 68 0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ngpios = <32>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+	gpio1: gpio@e0050080 {
+		compatible = "renesas,em-gio";
+		reg = <0xe0050080 0x2c>, <0xe00500c0 0x20>;
+		interrupts = <0 69 0>, <0 70 0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ngpios = <32>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+	gpio2: gpio@e0050100 {
+		compatible = "renesas,em-gio";
+		reg = <0xe0050100 0x2c>, <0xe0050140 0x20>;
+		interrupts = <0 71 0>, <0 72 0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ngpios = <32>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+	gpio3: gpio@e0050180 {
+		compatible = "renesas,em-gio";
+		reg = <0xe0050180 0x2c>, <0xe00501c0 0x20>;
+		interrupts = <0 73 0>, <0 74 0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ngpios = <32>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+	gpio4: gpio@e0050200 {
+		compatible = "renesas,em-gio";
+		reg = <0xe0050200 0x2c>, <0xe0050240 0x20>;
+		interrupts = <0 75 0>, <0 76 0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ngpios = <31>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
 };
-- 
cgit v1.2.2


From 23260e1b417843ea875bd7b21f17c5c80031c4cd Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Tue, 2 Jul 2013 18:28:06 +0900
Subject: ARM: shmobile: Use DT for GIC on EMEV2 and KZM9D

Remove the C version of the EMEV2 GIC setup code,
instead rely on GIC information provided by DT.

Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-kzm9d.c        |  2 --
 arch/arm/mach-shmobile/include/mach/emev2.h |  1 -
 arch/arm/mach-shmobile/setup-emev2.c        | 15 ---------------
 3 files changed, 18 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c
index 15900f1f8af7..30c2cc695b12 100644
--- a/arch/arm/mach-shmobile/board-kzm9d.c
+++ b/arch/arm/mach-shmobile/board-kzm9d.c
@@ -86,8 +86,6 @@ DT_MACHINE_START(KZM9D_DT, "kzm9d")
 	.smp		= smp_ops(emev2_smp_ops),
 	.map_io		= emev2_map_io,
 	.init_early	= emev2_init_delay,
-	.nr_irqs	= NR_IRQS_LEGACY,
-	.init_irq	= emev2_init_irq,
 	.init_machine	= kzm9d_add_standard_devices,
 	.init_late	= shmobile_init_late,
 	.dt_compat	= kzm9d_boards_compat_dt,
diff --git a/arch/arm/mach-shmobile/include/mach/emev2.h b/arch/arm/mach-shmobile/include/mach/emev2.h
index 3e0c0441c782..b0ab4b72770a 100644
--- a/arch/arm/mach-shmobile/include/mach/emev2.h
+++ b/arch/arm/mach-shmobile/include/mach/emev2.h
@@ -2,7 +2,6 @@
 #define __ASM_EMEV2_H__
 
 extern void emev2_map_io(void);
-extern void emev2_init_irq(void);
 extern void emev2_init_delay(void);
 extern void emev2_add_standard_devices(void);
 extern void emev2_clock_init(void);
diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index e4b46930db52..6fa485dacc9c 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -202,20 +202,6 @@ void __init emev2_init_delay(void)
 	shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */
 }
 
-void __init emev2_init_irq(void)
-{
-	void __iomem *gic_dist_base;
-	void __iomem *gic_cpu_base;
-
-	/* Static mappings, never released */
-	gic_dist_base = ioremap(0xe0028000, PAGE_SIZE);
-	gic_cpu_base = ioremap(0xe0020000, PAGE_SIZE);
-	BUG_ON(!gic_dist_base || !gic_cpu_base);
-
-	/* Use GIC to handle interrupts */
-	gic_init(0, 29, gic_dist_base, gic_cpu_base);
-}
-
 #ifdef CONFIG_USE_OF
 
 static const char *emev2_boards_compat_dt[] __initdata = {
@@ -226,7 +212,6 @@ static const char *emev2_boards_compat_dt[] __initdata = {
 DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)")
 	.smp		= smp_ops(emev2_smp_ops),
 	.init_early	= emev2_init_delay,
-	.nr_irqs	= NR_IRQS_LEGACY,
 	.dt_compat	= emev2_boards_compat_dt,
 MACHINE_END
 
-- 
cgit v1.2.2


From 683101a66203149da96e93fb8c0740c726bc114f Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Tue, 2 Jul 2013 18:28:14 +0900
Subject: ARM: shmobile: Use DT for SMP on EMEV2 and KZM9D

Rework the EMEV2 SMP code to rely on DT for CPU information
instead of reading out number of CPU cores from the SCU.

Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/smp-emev2.c | 17 +++--------------
 1 file changed, 3 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c
index 80991b35f4ac..97871655b716 100644
--- a/arch/arm/mach-shmobile/smp-emev2.c
+++ b/arch/arm/mach-shmobile/smp-emev2.c
@@ -38,9 +38,12 @@ static int __cpuinit emev2_boot_secondary(unsigned int cpu, struct task_struct *
 
 static void __init emev2_smp_prepare_cpus(unsigned int max_cpus)
 {
+	/* setup EMEV2 specific SCU base, enable */
+	shmobile_scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE);
 	scu_enable(shmobile_scu_base);
 
 	/* Tell ROM loader about our vector (in headsmp-scu.S, headsmp.S) */
+	emev2_clock_init(); /* need ioremapped SMU */
 	emev2_set_boot_vector(__pa(shmobile_boot_vector));
 	shmobile_boot_fn = virt_to_phys(shmobile_boot_scu);
 	shmobile_boot_arg = (unsigned long)shmobile_scu_base;
@@ -49,21 +52,7 @@ static void __init emev2_smp_prepare_cpus(unsigned int max_cpus)
 	scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL);
 }
 
-static void __init emev2_smp_init_cpus(void)
-{
-	unsigned int ncores;
-
-	/* setup EMEV2 specific SCU base */
-	shmobile_scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE);
-	emev2_clock_init(); /* need ioremapped SMU */
-
-	ncores = shmobile_scu_base ? scu_get_core_count(shmobile_scu_base) : 1;
-
-	shmobile_smp_init_cpus(ncores);
-}
-
 struct smp_operations emev2_smp_ops __initdata = {
-	.smp_init_cpus		= emev2_smp_init_cpus,
 	.smp_prepare_cpus	= emev2_smp_prepare_cpus,
 	.smp_boot_secondary	= emev2_boot_secondary,
 };
-- 
cgit v1.2.2


From 0ea2b5389ab1b63aa880c5735c15be0b26b91b1a Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Tue, 2 Jul 2013 18:28:22 +0900
Subject: ARM: shmobile: EMEV2 map_io update

Update the EMEV2 struct map_desc to exclude the SMU
and also include the ->map_io() callback in the DT
version of EMEV2 board support.

The EMEV2 SMP code can these days perform ioremap()
early on without the SMU information in the io_desc[].

To correctly support SMP in case of DT-only board
support then the ->map_io() callback is needed.

Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-emev2.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index 6fa485dacc9c..19980be7d6a9 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -38,13 +38,6 @@
 
 static struct map_desc emev2_io_desc[] __initdata = {
 #ifdef CONFIG_SMP
-	/* 128K entity map for 0xe0100000 (SMU) */
-	{
-		.virtual	= 0xe0100000,
-		.pfn		= __phys_to_pfn(0xe0100000),
-		.length		= SZ_128K,
-		.type		= MT_DEVICE
-	},
 	/* 2M mapping for SCU + L2 controller */
 	{
 		.virtual	= 0xf0000000,
@@ -211,6 +204,7 @@ static const char *emev2_boards_compat_dt[] __initdata = {
 
 DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)")
 	.smp		= smp_ops(emev2_smp_ops),
+	.map_io		= emev2_map_io,
 	.init_early	= emev2_init_delay,
 	.dt_compat	= emev2_boards_compat_dt,
 MACHINE_END
-- 
cgit v1.2.2


From 369ee2db438cc0adc6952b424743e9ed21a0edee Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Mon, 8 Jul 2013 17:54:45 +0200
Subject: ARM: shmobile: r8a73a4: add MMCIF and SDHI DT templates

This adds DT templates for all MMCIF and SDHI controllers on r8a73a4.
They are added with status="disabled". To use them platform-specific
DTs have to enable the required ones.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a73a4.dtsi | 45 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 45 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index 4e1ddf0d129c..6ce699be6095 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -166,4 +166,49 @@
 		interrupt-parent = <&gic>;
 		interrupts = <0 173 0x4>;
 	};
+
+	mmcif0: mmcif@ee200000 {
+		compatible = "renesas,sh-mmcif";
+		reg = <0 0xee200000 0 0x80>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 169 0x4>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	mmcif1: mmcif@ee220000 {
+		compatible = "renesas,sh-mmcif";
+		reg = <0 0xee220000 0 0x80>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 170 0x4>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	sdhi0: sdhi@ee100000 {
+		compatible = "renesas,r8a73a4-sdhi";
+		reg = <0 0xee100000 0 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 165 4>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
+
+	sdhi1: sdhi@ee120000 {
+		compatible = "renesas,r8a73a4-sdhi";
+		reg = <0 0xee120000 0 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 166 4>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
+
+	sdhi2: sdhi@ee140000 {
+		compatible = "renesas,r8a73a4-sdhi";
+		reg = <0 0xee140000 0 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 167 4>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
 };
-- 
cgit v1.2.2


From 8c9b1aa41853272adf505cc22be541f1eac2f94c Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Mon, 8 Jul 2013 17:54:46 +0200
Subject: ARM: shmobile: r8a7790: add MMCIF and SDHI DT templates

This adds DT templates for all MMCIF and SDHI controllers on r8a7790.
They are added with status="disabled". To use them platform-specific
DTs have to enable the required ones.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790.dtsi | 54 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 339d9b11721c..9cd882028095 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -54,4 +54,58 @@
 		interrupt-parent = <&gic>;
 		interrupts = <0 0 4>, <0 1 4>, <0 2 4>,	<0 3 4>;
 	};
+
+	mmcif0: mmcif@ee200000 {
+		compatible = "renesas,sh-mmcif";
+		reg = <0 0xee200000 0 0x80>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 169 0x4>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	mmcif1: mmcif@ee220000 {
+		compatible = "renesas,sh-mmcif";
+		reg = <0 0xee220000 0 0x80>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 170 0x4>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	sdhi0: sdhi@ee100000 {
+		compatible = "renesas,r8a7790-sdhi";
+		reg = <0 0xee100000 0 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 165 4>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
+
+	sdhi1: sdhi@ee120000 {
+		compatible = "renesas,r8a7790-sdhi";
+		reg = <0 0xee120000 0 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 166 4>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
+
+	sdhi2: sdhi@ee140000 {
+		compatible = "renesas,r8a7790-sdhi";
+		reg = <0 0xee140000 0 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 167 4>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
+
+	sdhi3: sdhi@ee160000 {
+		compatible = "renesas,r8a7790-sdhi";
+		reg = <0 0xee160000 0 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 168 4>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
 };
-- 
cgit v1.2.2


From 03393e8fe651aaf8824c519effbb51bf460ca57f Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Mon, 8 Jul 2013 15:00:30 +0900
Subject: ARM: shmobile: KZM9D DT reference implementation

Add a DT reference implementation for the KZM9D board.

Only DT devices are used in this case. UART, STI, GPIO
and SMP / GIC are all provided by emev2.dtsi.

There is still a board specific C file used for enabling
legacy SH clocks. This file will be removed after we have
moved over to common clocks.

Signed-off-by: Magnus Damm <damm@opensource.se>
[horms+renesas@verge.net.au: Do not include trailing blank line in
 board-kzm9d-reference.c ]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/Makefile                     |  1 +
 arch/arm/boot/dts/emev2-kzm9d-reference.dts    | 26 +++++++++++++++
 arch/arm/mach-shmobile/Kconfig                 | 12 +++++++
 arch/arm/mach-shmobile/Makefile                |  1 +
 arch/arm/mach-shmobile/Makefile.boot           |  1 +
 arch/arm/mach-shmobile/board-kzm9d-reference.c | 46 ++++++++++++++++++++++++++
 6 files changed, 87 insertions(+)
 create mode 100644 arch/arm/boot/dts/emev2-kzm9d-reference.dts
 create mode 100644 arch/arm/mach-shmobile/board-kzm9d-reference.c

(limited to 'arch')

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 641b3c9a7028..af19e38f8e97 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -183,6 +183,7 @@ dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \
 	ccu9540.dtb
 dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb
 dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
+	emev2-kzm9d-reference.dtb \
 	r8a7740-armadillo800eva.dtb \
 	r8a7778-bockw.dtb \
 	r8a7740-armadillo800eva-reference.dtb \
diff --git a/arch/arm/boot/dts/emev2-kzm9d-reference.dts b/arch/arm/boot/dts/emev2-kzm9d-reference.dts
new file mode 100644
index 000000000000..5ec065eda2e3
--- /dev/null
+++ b/arch/arm/boot/dts/emev2-kzm9d-reference.dts
@@ -0,0 +1,26 @@
+/*
+ * Device Tree Source for the KZM9D board
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+/dts-v1/;
+
+/include/ "emev2.dtsi"
+
+/ {
+	model = "EMEV2 KZM9D Board";
+	compatible = "renesas,kzm9d-reference", "renesas,emev2";
+
+	memory {
+		device_type = "memory";
+		reg = <0x40000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096";
+	};
+};
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 3912ce91fee4..7c5034aa1fe3 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -156,6 +156,18 @@ config MACH_KZM9D
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	select USE_OF
 
+config MACH_KZM9D_REFERENCE
+	bool "KZM9D board - Reference Device Tree Implementation"
+	depends on ARCH_EMEV2
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	select USE_OF
+	---help---
+	   Use reference implementation of KZM9D board support
+	   which makes a greater use of device tree at the expense
+	   of not supporting a number of devices.
+
+	   This is intended to aid developers
+
 config MACH_KZM9G
 	bool "KZM-A9-GT board"
 	depends on ARCH_SH73A0
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 6165a517f580..e8d0a2c904a0 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -46,6 +46,7 @@ obj-$(CONFIG_MACH_LAGER)	+= board-lager.o
 obj-$(CONFIG_MACH_ARMADILLO800EVA)	+= board-armadillo800eva.o
 obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE)	+= board-armadillo800eva-reference.o
 obj-$(CONFIG_MACH_KZM9D)	+= board-kzm9d.o
+obj-$(CONFIG_MACH_KZM9D_REFERENCE)	+= board-kzm9d-reference.o
 obj-$(CONFIG_MACH_KZM9G)	+= board-kzm9g.o
 obj-$(CONFIG_MACH_KZM9G_REFERENCE)	+= board-kzm9g-reference.o
 
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
index 84c6868580f0..7785c52b5cfd 100644
--- a/arch/arm/mach-shmobile/Makefile.boot
+++ b/arch/arm/mach-shmobile/Makefile.boot
@@ -7,6 +7,7 @@ loadaddr-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += 0x40008000
 loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
 loadaddr-$(CONFIG_MACH_KOTA2) += 0x41008000
 loadaddr-$(CONFIG_MACH_KZM9D) += 0x40008000
+loadaddr-$(CONFIG_MACH_KZM9D_REFERENCE) += 0x40008000
 loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000
 loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000
 loadaddr-$(CONFIG_MACH_LAGER) += 0x40008000
diff --git a/arch/arm/mach-shmobile/board-kzm9d-reference.c b/arch/arm/mach-shmobile/board-kzm9d-reference.c
new file mode 100644
index 000000000000..a7b28b24ab38
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-kzm9d-reference.c
@@ -0,0 +1,46 @@
+/*
+ * kzm9d board support - Reference DT implementation
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+#include <mach/emev2.h>
+#include <mach/common.h>
+#include <asm/mach/arch.h>
+
+static void __init kzm9d_add_standard_devices(void)
+{
+	emev2_clock_init();
+
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char *kzm9d_boards_compat_dt[] __initdata = {
+	"renesas,kzm9d-reference",
+	NULL,
+};
+
+DT_MACHINE_START(KZM9D_DT, "kzm9d")
+	.smp		= smp_ops(emev2_smp_ops),
+	.map_io		= emev2_map_io,
+	.init_early	= emev2_init_delay,
+	.init_machine	= kzm9d_add_standard_devices,
+	.init_late	= shmobile_init_late,
+	.dt_compat	= kzm9d_boards_compat_dt,
+MACHINE_END
-- 
cgit v1.2.2


From 66a5cab04d339d02b93a4671eadf8e251dbfdc2c Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Tue, 9 Jul 2013 13:26:54 +0900
Subject: ARM: shmobile: Add SMSC ethernet chip to KZM9D DT reference

Add support for the SMSC ethernet controller found
on the KZM9D board to the KZM9D DT Reference code.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/emev2-kzm9d-reference.dts | 31 +++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/boot/dts/emev2-kzm9d-reference.dts b/arch/arm/boot/dts/emev2-kzm9d-reference.dts
index 5ec065eda2e3..bed676b95c27 100644
--- a/arch/arm/boot/dts/emev2-kzm9d-reference.dts
+++ b/arch/arm/boot/dts/emev2-kzm9d-reference.dts
@@ -23,4 +23,35 @@
 	chosen {
 		bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096";
 	};
+
+	reg_1p8v: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_3p3v: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	lan9220@20000000 {
+		compatible = "smsc,lan9220", "smsc,lan9115";
+		reg = <0x20000000 0x10000>;
+		phy-mode = "mii";
+		interrupt-parent = <&gpio0>;
+		interrupts = <1 1>;	/* active high */
+		reg-io-width = <4>;
+		smsc,irq-active-high;
+		smsc,irq-push-pull;
+		vddvario-supply = <&reg_1p8v>;
+		vdd33a-supply = <&reg_3p3v>;
+	};
 };
-- 
cgit v1.2.2


From a4b91be0b607ffecf6cf9dacdefcaa0797340e3c Mon Sep 17 00:00:00 2001
From: Simon Horman <horms+renesas@verge.net.au>
Date: Wed, 26 Jun 2013 17:34:34 +0900
Subject: ARM: shmobile: r8a7790: add clocks for thermal

Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7790.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c
index 5d71313df52d..28eccd114ca7 100644
--- a/arch/arm/mach-shmobile/clock-r8a7790.c
+++ b/arch/arm/mach-shmobile/clock-r8a7790.c
@@ -49,6 +49,7 @@
 
 #define SMSTPCR2 0xe6150138
 #define SMSTPCR3 0xe615013c
+#define SMSTPCR5 0xe6150144
 #define SMSTPCR7 0xe615014c
 
 #define MODEMR		0xE6160060
@@ -182,6 +183,7 @@ static struct clk div6_clks[DIV6_NR] = {
 enum {
 	MSTP721, MSTP720,
 	MSTP717, MSTP716,
+	MSTP522,
 	MSTP315, MSTP314, MSTP313, MSTP312, MSTP311, MSTP305, MSTP304,
 	MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202,
 	MSTP_NR
@@ -203,6 +205,7 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP204] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 4, 0), /* SCIFA0 */
 	[MSTP203] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 3, 0), /* SCIFA1 */
 	[MSTP202] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 2, 0), /* SCIFA2 */
+	[MSTP522] = SH_CLK_MSTP32(&extal_clk, SMSTPCR5, 22, 0), /* Thermal */
 	[MSTP717] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 17, 0), /* HSCIF0 */
 	[MSTP716] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 16, 0), /* HSCIF1 */
 };
@@ -254,6 +257,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP720]),
 	CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP717]),
 	CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP716]),
+	CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
 	CLKDEV_DEV_ID("ee200000.mmcif", &mstp_clks[MSTP315]),
 	CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP315]),
 	CLKDEV_DEV_ID("ee100000.sdhi", &mstp_clks[MSTP314]),
-- 
cgit v1.2.2


From 0b8eeba45143030e29ec39c43daa1383146581e6 Mon Sep 17 00:00:00 2001
From: Simon Horman <horms+renesas@verge.net.au>
Date: Wed, 26 Jun 2013 16:22:21 +0900
Subject: ARM: shmobile: r8a7790: add thermal driver support

The current temperature may be read using:
cat /sys/class/thermal/thermal_zone0/temp

Based on similar work for the r8a73a4 by Kuninori Morimoto.

Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-r8a7790.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index b7e78b9a7fdf..bc40a44de127 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -148,6 +148,17 @@ static struct resource irqc0_resources[] __initdata = {
 					  &irqc##idx##_data,		\
 					  sizeof(struct renesas_irqc_config))
 
+static struct resource thermal_resources[] __initdata = {
+	DEFINE_RES_MEM(0xe61f0000, 0x14),
+	DEFINE_RES_MEM(0xe61f0100, 0x38),
+	DEFINE_RES_IRQ(gic_spi(69)),
+};
+
+#define r8a7790_register_thermal()					\
+	platform_device_register_simple("rcar_thermal", -1,		\
+					thermal_resources,		\
+					ARRAY_SIZE(thermal_resources))
+
 void __init r8a7790_add_standard_devices(void)
 {
 	r8a7790_register_scif(SCIFA0);
@@ -161,6 +172,7 @@ void __init r8a7790_add_standard_devices(void)
 	r8a7790_register_scif(HSCIF0);
 	r8a7790_register_scif(HSCIF1);
 	r8a7790_register_irqc(0);
+	r8a7790_register_thermal();
 }
 
 void __init r8a7790_timer_init(void)
-- 
cgit v1.2.2


From 8d27657286a1e9e6ee7adaf4d0638cefd708a6fa Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Wed, 22 May 2013 11:12:33 +0200
Subject: ARM: shmobile: r8a73a4: wait for completion when kicking the clock

To reconfigure clocks, controlled by FRQCRA and FRQCRB, a kick bit has to
be set and to make sure the setting has taken effect, it has to be read
back repeatedly until it is cleared by the hardware. This patch adds the
waiting part, that was missing until now.

Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a73a4.c | 22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c
index 5f7fe628b8a1..d5176d0861b5 100644
--- a/arch/arm/mach-shmobile/clock-r8a73a4.c
+++ b/arch/arm/mach-shmobile/clock-r8a73a4.c
@@ -184,6 +184,21 @@ PLL_CLOCK(pll2h_clk, &main_div2_clk, pll_parent_main_extal, 3, 5, PLL2HCR, 5);
 
 SH_FIXED_RATIO_CLK(pll1_div2_clk,	pll1_clk,	div2);
 
+static int frqcr_kick_do(struct clk *clk)
+{
+	int i;
+
+	/* set KICK bit in FRQCRB to update hardware setting, check success */
+	iowrite32(ioread32(CPG_MAP(FRQCRB)) | BIT(31), CPG_MAP(FRQCRB));
+	for (i = 1000; i; i--)
+		if (ioread32(CPG_MAP(FRQCRB)) & BIT(31))
+			cpu_relax();
+		else
+			return 0;
+
+	return -ETIMEDOUT;
+}
+
 static struct clk *main_clks[] = {
 	&extalr_clk,
 	&extal1_clk,
@@ -205,12 +220,7 @@ static struct clk *main_clks[] = {
 /* DIV4 */
 static void div4_kick(struct clk *clk)
 {
-	unsigned long value;
-
-	/* set KICK bit in FRQCRB to update hardware setting */
-	value = ioread32(CPG_MAP(FRQCRB));
-	value |= (1 << 31);
-	iowrite32(value, CPG_MAP(FRQCRB));
+	frqcr_kick_do(clk);
 }
 
 static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18, 24, 0, 36, 48, 10};
-- 
cgit v1.2.2


From 181135e0b7f58735969619c89548f6a37cd0ee36 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Wed, 22 May 2013 11:12:37 +0200
Subject: ARM: shmobile: r8a73a4: implement CPU clock scaling for CPUFreq

This patch adds support for the Z-clock on r8a73a4 SoCs, which is driving
the Cortex A15 core, and a "cpufreq-cpu0" platform device. Adding an
"operating-points" property to the CPU0 DT node and a regulator, this
patch allows platforms to use the generic cpufreq-cpu0 driver to use
SoC's DVFS capabilities.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Kconfig         |   2 +
 arch/arm/mach-shmobile/clock-r8a73a4.c | 123 ++++++++++++++++++++++++++++++++-
 arch/arm/mach-shmobile/setup-r8a73a4.c |   1 +
 3 files changed, 125 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 7c5034aa1fe3..734b3eec56fc 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -26,6 +26,8 @@ config ARCH_R8A73A4
 	select HAVE_ARM_ARCH_TIMER
 	select SH_CLK_CPG
 	select RENESAS_IRQC
+	select ARCH_HAS_CPUFREQ
+	select ARCH_HAS_OPP
 
 config ARCH_R8A7740
 	bool "R-Mobile A1 (R8A77400)"
diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c
index d5176d0861b5..824789c26fb6 100644
--- a/arch/arm/mach-shmobile/clock-r8a73a4.c
+++ b/arch/arm/mach-shmobile/clock-r8a73a4.c
@@ -34,6 +34,7 @@
 
 #define FRQCRA		0xE6150000
 #define FRQCRB		0xE6150004
+#define FRQCRC		0xE61500E0
 #define VCLKCR1		0xE6150008
 #define VCLKCR2		0xE615000C
 #define VCLKCR3		0xE615001C
@@ -52,6 +53,7 @@
 #define HSICKCR		0xE615026C
 #define M4CKCR		0xE6150098
 #define PLLECR		0xE61500D0
+#define PLL0CR		0xE61500D8
 #define PLL1CR		0xE6150028
 #define PLL2CR		0xE615002C
 #define PLL2SCR		0xE61501F4
@@ -177,6 +179,7 @@ static struct sh_clk_ops pll_clk_ops = {
 		.mapping	= &cpg_mapping,		\
 	}
 
+PLL_CLOCK(pll0_clk,  &main_clk,      pll_parent_main,      1, 20, PLL0CR,  0);
 PLL_CLOCK(pll1_clk,  &main_clk,      pll_parent_main,       1, 7, PLL1CR,  1);
 PLL_CLOCK(pll2_clk,  &main_div2_clk, pll_parent_main_extal, 3, 5, PLL2CR,  2);
 PLL_CLOCK(pll2s_clk, &main_div2_clk, pll_parent_main_extal, 3, 5, PLL2SCR, 4);
@@ -184,6 +187,14 @@ PLL_CLOCK(pll2h_clk, &main_div2_clk, pll_parent_main_extal, 3, 5, PLL2HCR, 5);
 
 SH_FIXED_RATIO_CLK(pll1_div2_clk,	pll1_clk,	div2);
 
+static atomic_t frqcr_lock;
+
+/* Several clocks need to access FRQCRB, have to lock */
+static bool frqcr_kick_check(struct clk *clk)
+{
+	return !(ioread32(CPG_MAP(FRQCRB)) & BIT(31));
+}
+
 static int frqcr_kick_do(struct clk *clk)
 {
 	int i;
@@ -199,6 +210,107 @@ static int frqcr_kick_do(struct clk *clk)
 	return -ETIMEDOUT;
 }
 
+static int zclk_set_rate(struct clk *clk, unsigned long rate)
+{
+	void __iomem *frqcrc;
+	int ret;
+	unsigned long step, p_rate;
+	u32 val;
+
+	if (!clk->parent || !__clk_get(clk->parent))
+		return -ENODEV;
+
+	if (!atomic_inc_and_test(&frqcr_lock) || !frqcr_kick_check(clk)) {
+		ret = -EBUSY;
+		goto done;
+	}
+
+	frqcrc = clk->mapped_reg + (FRQCRC - (u32)clk->enable_reg);
+
+	p_rate = clk_get_rate(clk->parent);
+	if (rate == p_rate) {
+		val = 0;
+	} else {
+		step = DIV_ROUND_CLOSEST(p_rate, 32);
+		val = 32 - rate / step;
+	}
+
+	iowrite32((ioread32(frqcrc) & ~(clk->div_mask << clk->enable_bit)) |
+		  (val << clk->enable_bit), frqcrc);
+
+	ret = frqcr_kick_do(clk);
+
+done:
+	atomic_dec(&frqcr_lock);
+	__clk_put(clk->parent);
+	return ret;
+}
+
+static long zclk_round_rate(struct clk *clk, unsigned long rate)
+{
+	/*
+	 * theoretical rate = parent rate * multiplier / 32,
+	 * where 1 <= multiplier <= 32. Therefore we should do
+	 * multiplier = rate * 32 / parent rate
+	 * rounded rate = parent rate * multiplier / 32.
+	 * However, multiplication before division won't fit in 32 bits, so
+	 * we sacrifice some precision by first dividing and then multiplying.
+	 * To find the nearest divisor we calculate both and pick up the best
+	 * one. This avoids 64-bit arithmetics.
+	 */
+	unsigned long step, mul_min, mul_max, rate_min, rate_max;
+
+	rate_max = clk_get_rate(clk->parent);
+
+	/* output freq <= parent */
+	if (rate >= rate_max)
+		return rate_max;
+
+	step = DIV_ROUND_CLOSEST(rate_max, 32);
+	/* output freq >= parent / 32 */
+	if (step >= rate)
+		return step;
+
+	mul_min = rate / step;
+	mul_max = DIV_ROUND_UP(rate, step);
+	rate_min = step * mul_min;
+	if (mul_max == mul_min)
+		return rate_min;
+
+	rate_max = step * mul_max;
+
+	if (rate_max - rate <  rate - rate_min)
+		return rate_max;
+
+	return rate_min;
+}
+
+static unsigned long zclk_recalc(struct clk *clk)
+{
+	void __iomem *frqcrc = FRQCRC - (u32)clk->enable_reg + clk->mapped_reg;
+	unsigned int max = clk->div_mask + 1;
+	unsigned long val = ((ioread32(frqcrc) >> clk->enable_bit) &
+			     clk->div_mask);
+
+	return DIV_ROUND_CLOSEST(clk_get_rate(clk->parent), max) *
+		(max - val);
+}
+
+static struct sh_clk_ops zclk_ops = {
+	.recalc = zclk_recalc,
+	.set_rate = zclk_set_rate,
+	.round_rate = zclk_round_rate,
+};
+
+static struct clk z_clk = {
+	.parent = &pll0_clk,
+	.div_mask = 0x1f,
+	.enable_bit = 8,
+	/* We'll need to access FRQCRB and FRQCRC */
+	.enable_reg = (void __iomem *)FRQCRB,
+	.ops = &zclk_ops,
+};
+
 static struct clk *main_clks[] = {
 	&extalr_clk,
 	&extal1_clk,
@@ -210,17 +322,21 @@ static struct clk *main_clks[] = {
 	&main_div2_clk,
 	&fsiack_clk,
 	&fsibck_clk,
+	&pll0_clk,
 	&pll1_clk,
 	&pll1_div2_clk,
 	&pll2_clk,
 	&pll2s_clk,
 	&pll2h_clk,
+	&z_clk,
 };
 
 /* DIV4 */
 static void div4_kick(struct clk *clk)
 {
-	frqcr_kick_do(clk);
+	if (!WARN(!atomic_inc_and_test(&frqcr_lock), "FRQCR* lock broken!\n"))
+		frqcr_kick_do(clk);
+	atomic_dec(&frqcr_lock);
 }
 
 static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18, 24, 0, 36, 48, 10};
@@ -396,6 +512,9 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("pll2s",			&pll2s_clk),
 	CLKDEV_CON_ID("pll2h",			&pll2h_clk),
 
+	/* CPU clock */
+	CLKDEV_DEV_ID("cpufreq-cpu0",		&z_clk),
+
 	/* DIV6 */
 	CLKDEV_CON_ID("zb",			&div6_clks[DIV6_ZB]),
 	CLKDEV_CON_ID("vck1",			&div6_clks[DIV6_VCK1]),
@@ -439,6 +558,8 @@ void __init r8a73a4_clock_init(void)
 	int k, ret = 0;
 	u32 ckscr;
 
+	atomic_set(&frqcr_lock, -1);
+
 	reg = ioremap_nocache(CKSCR, PAGE_SIZE);
 	BUG_ON(!reg);
 	ckscr = ioread32(reg);
diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c
index a8c4e41bf27a..9c52096ac995 100644
--- a/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ b/arch/arm/mach-shmobile/setup-r8a73a4.c
@@ -184,6 +184,7 @@ void __init r8a73a4_add_standard_devices(void)
 #ifdef CONFIG_USE_OF
 void __init r8a73a4_add_standard_devices_dt(void)
 {
+	platform_device_register_simple("cpufreq-cpu0", -1, NULL, 0);
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
-- 
cgit v1.2.2


From d1c3c959f2206dad0582876af2510aded4f9eac5 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Fri, 21 Jun 2013 09:10:35 +0200
Subject: ARM: shmobile: r8a73a4: safeguard against wrong clk_set_rate() uses

clk_set_rate() should only be called with exact rates, returned by
clk_round_rate(). However, it is still good to verify, that the value,
passed to clock's .set_rate() method is at least valid. This patch adds
such a check for the Z-clock on r8a73a4.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a73a4.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c
index 824789c26fb6..22f10ff40272 100644
--- a/arch/arm/mach-shmobile/clock-r8a73a4.c
+++ b/arch/arm/mach-shmobile/clock-r8a73a4.c
@@ -225,16 +225,28 @@ static int zclk_set_rate(struct clk *clk, unsigned long rate)
 		goto done;
 	}
 
-	frqcrc = clk->mapped_reg + (FRQCRC - (u32)clk->enable_reg);
+	/*
+	 * Users are supposed to first call clk_set_rate() only with
+	 * clk_round_rate() results. So, we don't fix wrong rates here, but
+	 * guard against them anyway
+	 */
 
 	p_rate = clk_get_rate(clk->parent);
 	if (rate == p_rate) {
 		val = 0;
 	} else {
 		step = DIV_ROUND_CLOSEST(p_rate, 32);
+
+		if (rate > p_rate || rate < step) {
+			ret = -EINVAL;
+			goto done;
+		}
+
 		val = 32 - rate / step;
 	}
 
+	frqcrc = clk->mapped_reg + (FRQCRC - (u32)clk->enable_reg);
+
 	iowrite32((ioread32(frqcrc) & ~(clk->div_mask << clk->enable_bit)) |
 		  (val << clk->enable_bit), frqcrc);
 
-- 
cgit v1.2.2


From a040f22d2c2e82347f978b52e7402a7387e5dee5 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Fri, 21 Jun 2013 09:10:38 +0200
Subject: ARM: shmobile: r8a73a4: add Z2 clock support

The Z2 clock on r8a73a4 is used to clock the 4 Cortex A7 cores on the SoC.
Add a definition for this clock to later use it from the arm_big_little
CPUFreq driver.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a73a4.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c
index 22f10ff40272..27ff58c8e078 100644
--- a/arch/arm/mach-shmobile/clock-r8a73a4.c
+++ b/arch/arm/mach-shmobile/clock-r8a73a4.c
@@ -323,6 +323,21 @@ static struct clk z_clk = {
 	.ops = &zclk_ops,
 };
 
+/*
+ * It seems only 1/2 divider is usable in manual mode. 1/2 / 2/3
+ * switching is only available in auto-DVFS mode
+ */
+SH_FIXED_RATIO_CLK(pll0_div2_clk,	pll0_clk,		div2);
+
+static struct clk z2_clk = {
+	.parent = &pll0_div2_clk,
+	.div_mask = 0x1f,
+	.enable_bit = 0,
+	/* We'll need to access FRQCRB and FRQCRC */
+	.enable_reg = (void __iomem *)FRQCRB,
+	.ops = &zclk_ops,
+};
+
 static struct clk *main_clks[] = {
 	&extalr_clk,
 	&extal1_clk,
@@ -341,6 +356,8 @@ static struct clk *main_clks[] = {
 	&pll2s_clk,
 	&pll2h_clk,
 	&z_clk,
+	&pll0_div2_clk,
+	&z2_clk,
 };
 
 /* DIV4 */
-- 
cgit v1.2.2


From 1e453df90047f052cdce2041a572830c8eb32084 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Thu, 27 Jun 2013 11:47:56 +0200
Subject: ARM: shmobile: r8a73a4: add clocks for I2C controllers

r8a73a4 SoCs have numerous I2C controllers, of which 9 are compatible with
the i2c-sh_mobile.c driver. This patch adds clock definitions for them.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a73a4.c | 25 +++++++++++++++++++++++--
 1 file changed, 23 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c
index 27ff58c8e078..f831b3bbbb07 100644
--- a/arch/arm/mach-shmobile/clock-r8a73a4.c
+++ b/arch/arm/mach-shmobile/clock-r8a73a4.c
@@ -30,6 +30,7 @@
 
 #define SMSTPCR2 0xe6150138
 #define SMSTPCR3 0xe615013c
+#define SMSTPCR4 0xe6150140
 #define SMSTPCR5 0xe6150144
 
 #define FRQCRA		0xE6150000
@@ -504,8 +505,10 @@ static struct clk div6_clks[DIV6_NR] = {
 /* MSTP */
 enum {
 	MSTP217, MSTP216, MSTP207, MSTP206, MSTP204, MSTP203,
-	MSTP315, MSTP314, MSTP313, MSTP312, MSTP305,
-	MSTP522,
+	MSTP323, MSTP318, MSTP317, MSTP316,
+	MSTP315, MSTP314, MSTP313, MSTP312, MSTP305, MSTP300,
+	MSTP411, MSTP410, MSTP409,
+	MSTP522, MSTP515,
 	MSTP_NR
 };
 
@@ -516,12 +519,21 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP207] = SH_CLK_MSTP32(&div6_clks[DIV6_MP],	SMSTPCR2, 7, 0), /* SCIFB1 */
 	[MSTP216] = SH_CLK_MSTP32(&div6_clks[DIV6_MP],	SMSTPCR2, 16, 0), /* SCIFB2 */
 	[MSTP217] = SH_CLK_MSTP32(&div6_clks[DIV6_MP],	SMSTPCR2, 17, 0), /* SCIFB3 */
+	[MSTP300] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 0, 0), /* IIC2 */
 	[MSTP305] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC1],SMSTPCR3, 5, 0), /* MMCIF1 */
 	[MSTP312] = SH_CLK_MSTP32(&div6_clks[DIV6_SDHI2],SMSTPCR3, 12, 0), /* SDHI2 */
 	[MSTP313] = SH_CLK_MSTP32(&div6_clks[DIV6_SDHI1],SMSTPCR3, 13, 0), /* SDHI1 */
 	[MSTP314] = SH_CLK_MSTP32(&div6_clks[DIV6_SDHI0],SMSTPCR3, 14, 0), /* SDHI0 */
 	[MSTP315] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC0],SMSTPCR3, 15, 0), /* MMCIF0 */
+	[MSTP316] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 16, 0), /* IIC6 */
+	[MSTP317] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 17, 0), /* IIC7 */
+	[MSTP318] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 18, 0), /* IIC0 */
+	[MSTP323] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 23, 0), /* IIC1 */
+	[MSTP409] = SH_CLK_MSTP32(&main_div2_clk,	SMSTPCR4, 9, 0), /* IIC5 */
+	[MSTP410] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR4, 10, 0), /* IIC4 */
+	[MSTP411] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR4, 11, 0), /* IIC3 */
 	[MSTP522] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR5, 22, 0), /* Thermal */
+	[MSTP515] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR5, 15, 0), /* IIC8 */
 };
 
 static struct clk_lookup lookups[] = {
@@ -566,6 +578,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]),
 	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP217]),
 	CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
+	CLKDEV_DEV_ID("e6520000.i2c", &mstp_clks[MSTP300]),
 	CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]),
 	CLKDEV_DEV_ID("ee220000.mmcif", &mstp_clks[MSTP305]),
 	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP312]),
@@ -576,6 +589,14 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("ee100000.sdhi", &mstp_clks[MSTP314]),
 	CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP315]),
 	CLKDEV_DEV_ID("ee200000.mmcif", &mstp_clks[MSTP315]),
+	CLKDEV_DEV_ID("e6550000.i2c", &mstp_clks[MSTP316]),
+	CLKDEV_DEV_ID("e6560000.i2c", &mstp_clks[MSTP317]),
+	CLKDEV_DEV_ID("e6500000.i2c", &mstp_clks[MSTP318]),
+	CLKDEV_DEV_ID("e6510000.i2c", &mstp_clks[MSTP323]),
+	CLKDEV_DEV_ID("e60b0000.i2c", &mstp_clks[MSTP409]),
+	CLKDEV_DEV_ID("e6540000.i2c", &mstp_clks[MSTP410]),
+	CLKDEV_DEV_ID("e6530000.i2c", &mstp_clks[MSTP411]),
+	CLKDEV_DEV_ID("e6570000.i2c", &mstp_clks[MSTP515]),
 
 	/* for DT */
 	CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]),
-- 
cgit v1.2.2


From 29eb2ba89c63c6f57dc3a8b1a89241c7a877a3c8 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Fri, 28 Jun 2013 19:13:27 +0900
Subject: ARM: shmobile: Sort r8a7790 MSTP entries

The r8a7790 MSTP bits should be kept sorted in the same way
as on other mach-shmobile SoCs. Move the HSCIF and thermal
bits to clean up the current state.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7790.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c
index 28eccd114ca7..10d99b3fe8d2 100644
--- a/arch/arm/mach-shmobile/clock-r8a7790.c
+++ b/arch/arm/mach-shmobile/clock-r8a7790.c
@@ -192,6 +192,9 @@ enum {
 static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP721] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 21, 0), /* SCIF0 */
 	[MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */
+	[MSTP717] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 17, 0), /* HSCIF0 */
+	[MSTP716] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 16, 0), /* HSCIF1 */
+	[MSTP522] = SH_CLK_MSTP32(&extal_clk, SMSTPCR5, 22, 0), /* Thermal */
 	[MSTP315] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC0], SMSTPCR3, 15, 0), /* MMC0 */
 	[MSTP314] = SH_CLK_MSTP32(&div4_clks[DIV4_SD0], SMSTPCR3, 14, 0), /* SDHI0 */
 	[MSTP313] = SH_CLK_MSTP32(&div4_clks[DIV4_SD1], SMSTPCR3, 13, 0), /* SDHI1 */
@@ -205,9 +208,6 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP204] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 4, 0), /* SCIFA0 */
 	[MSTP203] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 3, 0), /* SCIFA1 */
 	[MSTP202] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 2, 0), /* SCIFA2 */
-	[MSTP522] = SH_CLK_MSTP32(&extal_clk, SMSTPCR5, 22, 0), /* Thermal */
-	[MSTP717] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 17, 0), /* HSCIF0 */
-	[MSTP716] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 16, 0), /* HSCIF1 */
 };
 
 static struct clk_lookup lookups[] = {
-- 
cgit v1.2.2


From 99ade1a0f02e086248874d9908def3e8e4539418 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Fri, 28 Jun 2013 20:27:04 +0900
Subject: ARM: shmobile: Add r8a7790 CMT00 clock event

Add clock event support for CMT0 timer channel 0
to the r8a7790 SoC code. On most ARM mach-shmobile
the CMT is hooked up to a 32KHz clock but on r8a7790
a 31.7KHz clock is instead used.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7790.c |  4 ++++
 arch/arm/mach-shmobile/setup-r8a7790.c | 23 ++++++++++++++++++++++-
 2 files changed, 26 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c
index 10d99b3fe8d2..62d8162c7e70 100644
--- a/arch/arm/mach-shmobile/clock-r8a7790.c
+++ b/arch/arm/mach-shmobile/clock-r8a7790.c
@@ -47,6 +47,7 @@
 #define CPG_BASE 0xe6150000
 #define CPG_LEN 0x1000
 
+#define SMSTPCR1 0xe6150134
 #define SMSTPCR2 0xe6150138
 #define SMSTPCR3 0xe615013c
 #define SMSTPCR5 0xe6150144
@@ -186,6 +187,7 @@ enum {
 	MSTP522,
 	MSTP315, MSTP314, MSTP313, MSTP312, MSTP311, MSTP305, MSTP304,
 	MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202,
+	MSTP124,
 	MSTP_NR
 };
 
@@ -208,6 +210,7 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP204] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 4, 0), /* SCIFA0 */
 	[MSTP203] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 3, 0), /* SCIFA1 */
 	[MSTP202] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 2, 0), /* SCIFA2 */
+	[MSTP124] = SH_CLK_MSTP32(&rclk_clk, SMSTPCR1, 24, 0), /* CMT0 */
 };
 
 static struct clk_lookup lookups[] = {
@@ -270,6 +273,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_mobile_sdhi.3", &mstp_clks[MSTP311]),
 	CLKDEV_DEV_ID("ee220000.mmcif", &mstp_clks[MSTP305]),
 	CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]),
+	CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]),
 };
 
 #define R8A7790_CLOCK_ROOT(e, m, p0, p1, p30, p31)		\
diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index bc40a44de127..ece60c635de7 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -21,9 +21,10 @@
 #include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
-#include <linux/serial_sci.h>
 #include <linux/platform_data/gpio-rcar.h>
 #include <linux/platform_data/irq-renesas-irqc.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
 #include <mach/common.h>
 #include <mach/irqs.h>
 #include <mach/r8a7790.h>
@@ -159,6 +160,25 @@ static struct resource thermal_resources[] __initdata = {
 					thermal_resources,		\
 					ARRAY_SIZE(thermal_resources))
 
+static struct sh_timer_config cmt00_platform_data = {
+	.name = "CMT00",
+	.timer_bit = 0,
+	.clockevent_rating = 80,
+};
+
+static struct resource cmt00_resources[] = {
+	DEFINE_RES_MEM(0xffca0510, 0x0c),
+	DEFINE_RES_MEM(0xffca0500, 0x04),
+	DEFINE_RES_IRQ(gic_spi(142)), /* CMT0_0 */
+};
+
+#define r8a7790_register_cmt(idx)					\
+	platform_device_register_resndata(&platform_bus, "sh_cmt",	\
+					  idx, cmt##idx##_resources,	\
+					  ARRAY_SIZE(cmt##idx##_resources), \
+					  &cmt##idx##_platform_data,	\
+					  sizeof(struct sh_timer_config))
+
 void __init r8a7790_add_standard_devices(void)
 {
 	r8a7790_register_scif(SCIFA0);
@@ -173,6 +193,7 @@ void __init r8a7790_add_standard_devices(void)
 	r8a7790_register_scif(HSCIF1);
 	r8a7790_register_irqc(0);
 	r8a7790_register_thermal();
+	r8a7790_register_cmt(00);
 }
 
 void __init r8a7790_timer_init(void)
-- 
cgit v1.2.2


From 8333d8c995169e489a81241bd632a4b9370ed7c3 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Fri, 28 Jun 2013 20:27:13 +0900
Subject: ARM: shmobile: Make r8a7790 Arch timer optional

Update the r8a7790 code to allow using other
timers than Arch timer for clock events.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Kconfig                | 1 -
 arch/arm/mach-shmobile/board-lager.c          | 1 +
 arch/arm/mach-shmobile/include/mach/r8a7790.h | 1 +
 arch/arm/mach-shmobile/setup-r8a7790.c        | 8 ++++++++
 4 files changed, 10 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 734b3eec56fc..406077c9149b 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -61,7 +61,6 @@ config ARCH_R8A7790
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_GIC
 	select CPU_V7
-	select HAVE_ARM_ARCH_TIMER
 	select SH_CLK_CPG
 	select RENESAS_IRQC
 
diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c
index 1e99b17767bb..d0da0525bf0b 100644
--- a/arch/arm/mach-shmobile/board-lager.c
+++ b/arch/arm/mach-shmobile/board-lager.c
@@ -102,6 +102,7 @@ static const char *lager_boards_compat_dt[] __initdata = {
 };
 
 DT_MACHINE_START(LAGER_DT, "lager")
+	.init_early	= r8a7790_init_delay,
 	.init_time	= r8a7790_timer_init,
 	.init_machine	= lager_add_standard_devices,
 	.dt_compat	= lager_boards_compat_dt,
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7790.h b/arch/arm/mach-shmobile/include/mach/r8a7790.h
index 2e919e61fa0d..7851cc1bc9fb 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7790.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7790.h
@@ -4,6 +4,7 @@
 void r8a7790_add_standard_devices(void);
 void r8a7790_clock_init(void);
 void r8a7790_pinmux_init(void);
+void r8a7790_init_delay(void);
 void r8a7790_timer_init(void);
 
 #endif /* __ASM_R8A7790_H__ */
diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index ece60c635de7..f01542e13e58 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -208,6 +208,13 @@ void __init r8a7790_timer_init(void)
 	shmobile_timer_init();
 }
 
+void __init r8a7790_init_delay(void)
+{
+#ifndef CONFIG_ARM_ARCH_TIMER
+	shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */
+#endif
+}
+
 #ifdef CONFIG_USE_OF
 
 static const char *r8a7790_boards_compat_dt[] __initdata = {
@@ -216,6 +223,7 @@ static const char *r8a7790_boards_compat_dt[] __initdata = {
 };
 
 DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)")
+	.init_early	= r8a7790_init_delay,
 	.init_time	= r8a7790_timer_init,
 	.dt_compat	= r8a7790_boards_compat_dt,
 MACHINE_END
-- 
cgit v1.2.2


From a7b99f27a260a25f856ea37090cea997d50fe112 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Fri, 28 Jun 2013 20:27:23 +0900
Subject: ARM: shmobile: Add r8a73a4 CMT10 clock event

Add clock event support for CMT1 timer channel 0
to the r8a73a4 SoC code. The CMT is used together
with a 32KHz clock in this case.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a73a4.c |  4 +++-
 arch/arm/mach-shmobile/setup-r8a73a4.c | 21 +++++++++++++++++++++
 2 files changed, 24 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c
index f831b3bbbb07..8ea5ef6c79cc 100644
--- a/arch/arm/mach-shmobile/clock-r8a73a4.c
+++ b/arch/arm/mach-shmobile/clock-r8a73a4.c
@@ -505,7 +505,7 @@ static struct clk div6_clks[DIV6_NR] = {
 /* MSTP */
 enum {
 	MSTP217, MSTP216, MSTP207, MSTP206, MSTP204, MSTP203,
-	MSTP323, MSTP318, MSTP317, MSTP316,
+	MSTP329, MSTP323, MSTP318, MSTP317, MSTP316,
 	MSTP315, MSTP314, MSTP313, MSTP312, MSTP305, MSTP300,
 	MSTP411, MSTP410, MSTP409,
 	MSTP522, MSTP515,
@@ -529,6 +529,7 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP317] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 17, 0), /* IIC7 */
 	[MSTP318] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 18, 0), /* IIC0 */
 	[MSTP323] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 23, 0), /* IIC1 */
+	[MSTP329] = SH_CLK_MSTP32(&extalr_clk, SMSTPCR3, 29, 0), /* CMT10 */
 	[MSTP409] = SH_CLK_MSTP32(&main_div2_clk,	SMSTPCR4, 9, 0), /* IIC5 */
 	[MSTP410] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR4, 10, 0), /* IIC4 */
 	[MSTP411] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR4, 11, 0), /* IIC3 */
@@ -593,6 +594,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("e6560000.i2c", &mstp_clks[MSTP317]),
 	CLKDEV_DEV_ID("e6500000.i2c", &mstp_clks[MSTP318]),
 	CLKDEV_DEV_ID("e6510000.i2c", &mstp_clks[MSTP323]),
+	CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]),
 	CLKDEV_DEV_ID("e60b0000.i2c", &mstp_clks[MSTP409]),
 	CLKDEV_DEV_ID("e6540000.i2c", &mstp_clks[MSTP410]),
 	CLKDEV_DEV_ID("e6530000.i2c", &mstp_clks[MSTP411]),
diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c
index 9c52096ac995..b8dddf4a7ae9 100644
--- a/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ b/arch/arm/mach-shmobile/setup-r8a73a4.c
@@ -22,6 +22,7 @@
 #include <linux/of_platform.h>
 #include <linux/platform_data/irq-renesas-irqc.h>
 #include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
 #include <mach/common.h>
 #include <mach/irqs.h>
 #include <mach/r8a73a4.h>
@@ -168,6 +169,25 @@ static const struct resource thermal0_resources[] = {
 					thermal0_resources,		\
 					ARRAY_SIZE(thermal0_resources))
 
+static struct sh_timer_config cmt10_platform_data = {
+	.name = "CMT10",
+	.timer_bit = 0,
+	.clockevent_rating = 80,
+};
+
+static struct resource cmt10_resources[] = {
+	DEFINE_RES_MEM(0xe6130010, 0x0c),
+	DEFINE_RES_MEM(0xe6130000, 0x04),
+	DEFINE_RES_IRQ(gic_spi(120)), /* CMT1_0 */
+};
+
+#define r8a7790_register_cmt(idx)					\
+	platform_device_register_resndata(&platform_bus, "sh_cmt",	\
+					  idx, cmt##idx##_resources,	\
+					  ARRAY_SIZE(cmt##idx##_resources), \
+					  &cmt##idx##_platform_data,	\
+					  sizeof(struct sh_timer_config))
+
 void __init r8a73a4_add_standard_devices(void)
 {
 	r8a73a4_register_scif(SCIFA0);
@@ -179,6 +199,7 @@ void __init r8a73a4_add_standard_devices(void)
 	r8a73a4_register_irqc(0);
 	r8a73a4_register_irqc(1);
 	r8a73a4_register_thermal();
+	r8a7790_register_cmt(10);
 }
 
 #ifdef CONFIG_USE_OF
-- 
cgit v1.2.2


From b9a30ef1d354c0bc0cc6d973bbe7ede9f00716ee Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Fri, 28 Jun 2013 20:27:32 +0900
Subject: ARM: shmobile: Make r8a73a4 Arch timer optional

Update the r8a73a4 code to allow using other
timers than Arch timer for clock event

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Kconfig                | 1 -
 arch/arm/mach-shmobile/board-ape6evm.c        | 1 +
 arch/arm/mach-shmobile/include/mach/r8a73a4.h | 1 +
 arch/arm/mach-shmobile/setup-r8a73a4.c        | 8 ++++++++
 4 files changed, 10 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 406077c9149b..dd80f215feeb 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -23,7 +23,6 @@ config ARCH_R8A73A4
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_GIC
 	select CPU_V7
-	select HAVE_ARM_ARCH_TIMER
 	select SH_CLK_CPG
 	select RENESAS_IRQC
 	select ARCH_HAS_CPUFREQ
diff --git a/arch/arm/mach-shmobile/board-ape6evm.c b/arch/arm/mach-shmobile/board-ape6evm.c
index 1fbc39a14e25..af6dd39d3758 100644
--- a/arch/arm/mach-shmobile/board-ape6evm.c
+++ b/arch/arm/mach-shmobile/board-ape6evm.c
@@ -101,6 +101,7 @@ static const char *ape6evm_boards_compat_dt[] __initdata = {
 };
 
 DT_MACHINE_START(APE6EVM_DT, "ape6evm")
+	.init_early	= r8a73a4_init_delay,
 	.init_time	= shmobile_timer_init,
 	.init_machine	= ape6evm_add_standard_devices,
 	.dt_compat	= ape6evm_boards_compat_dt,
diff --git a/arch/arm/mach-shmobile/include/mach/r8a73a4.h b/arch/arm/mach-shmobile/include/mach/r8a73a4.h
index f043103e32c9..144a85e29245 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a73a4.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a73a4.h
@@ -4,5 +4,6 @@
 void r8a73a4_add_standard_devices(void);
 void r8a73a4_clock_init(void);
 void r8a73a4_pinmux_init(void);
+void r8a73a4_init_delay(void);
 
 #endif /* __ASM_R8A73A4_H__ */
diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c
index b8dddf4a7ae9..d533bd23865c 100644
--- a/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ b/arch/arm/mach-shmobile/setup-r8a73a4.c
@@ -202,6 +202,13 @@ void __init r8a73a4_add_standard_devices(void)
 	r8a7790_register_cmt(10);
 }
 
+void __init r8a73a4_init_delay(void)
+{
+#ifndef CONFIG_ARM_ARCH_TIMER
+	shmobile_setup_delay(1500, 2, 4); /* Cortex-A15 @ 1500MHz */
+#endif
+}
+
 #ifdef CONFIG_USE_OF
 void __init r8a73a4_add_standard_devices_dt(void)
 {
@@ -215,6 +222,7 @@ static const char *r8a73a4_boards_compat_dt[] __initdata = {
 };
 
 DT_MACHINE_START(R8A73A4_DT, "Generic R8A73A4 (Flattened Device Tree)")
+	.init_early	= r8a73a4_init_delay,
 	.init_machine	= r8a73a4_add_standard_devices_dt,
 	.init_time	= shmobile_timer_init,
 	.dt_compat	= r8a73a4_boards_compat_dt,
-- 
cgit v1.2.2


From 8d7217e5d74966e1016dad1f48fdaebb85deb685 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Tue, 2 Jul 2013 18:28:30 +0900
Subject: ARM: shmobile: Disconnect EMEV2 SMP code from clocks

Update the EMEV2 SMP code to access the SMU directly
instead of relying on help from the legacy clock code.

This change moves us one step closer to common clocks.

Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-emev2.c        | 18 ------------------
 arch/arm/mach-shmobile/include/mach/emev2.h |  1 -
 arch/arm/mach-shmobile/smp-emev2.c          | 11 +++++++++--
 3 files changed, 9 insertions(+), 21 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/clock-emev2.c b/arch/arm/mach-shmobile/clock-emev2.c
index 56dd0cfcddc7..5ac13ba71d54 100644
--- a/arch/arm/mach-shmobile/clock-emev2.c
+++ b/arch/arm/mach-shmobile/clock-emev2.c
@@ -40,7 +40,6 @@
 #define USIB2SCLKDIV 0x65c
 #define USIB3SCLKDIV 0x660
 #define STI_CLKSEL 0x688
-#define SMU_GENERAL_REG0 0x7c0
 
 /* not pretty, but hey */
 static void __iomem *smu_base;
@@ -51,11 +50,6 @@ static void emev2_smu_write(unsigned long value, int offs)
 	iowrite32(value, smu_base + offs);
 }
 
-void emev2_set_boot_vector(unsigned long value)
-{
-	emev2_smu_write(value, SMU_GENERAL_REG0);
-}
-
 static struct clk_mapping smu_mapping = {
 	.phys	= EMEV2_SMU_BASE,
 	.len	= PAGE_SIZE,
@@ -205,18 +199,6 @@ static struct clk_lookup lookups[] = {
 void __init emev2_clock_init(void)
 {
 	int k, ret = 0;
-	static int is_setup;
-
-	/* yuck, this is ugly as hell, but the non-smp case of clocks
-	 * code is now designed to rely on ioremap() instead of static
-	 * entity maps. in the case of smp we need access to the SMU
-	 * register earlier than ioremap() is actually working without
-	 * any static maps. to enable SMP in ugly but with dynamic
-	 * mappings we have to call emev2_clock_init() from different
-	 * places depending on UP and SMP...
-	 */
-	if (is_setup++)
-		return;
 
 	smu_base = ioremap(EMEV2_SMU_BASE, PAGE_SIZE);
 	BUG_ON(!smu_base);
diff --git a/arch/arm/mach-shmobile/include/mach/emev2.h b/arch/arm/mach-shmobile/include/mach/emev2.h
index b0ab4b72770a..c2eb7568d9be 100644
--- a/arch/arm/mach-shmobile/include/mach/emev2.h
+++ b/arch/arm/mach-shmobile/include/mach/emev2.h
@@ -5,7 +5,6 @@ extern void emev2_map_io(void);
 extern void emev2_init_delay(void);
 extern void emev2_add_standard_devices(void);
 extern void emev2_clock_init(void);
-extern void emev2_set_boot_vector(unsigned long value);
 
 #define EMEV2_GPIO_BASE 200
 #define EMEV2_GPIO_IRQ(n) (EMEV2_GPIO_BASE + (n))
diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c
index 97871655b716..1bf8bc7e8ed8 100644
--- a/arch/arm/mach-shmobile/smp-emev2.c
+++ b/arch/arm/mach-shmobile/smp-emev2.c
@@ -29,6 +29,8 @@
 #include <asm/smp_scu.h>
 
 #define EMEV2_SCU_BASE 0x1e000000
+#define EMEV2_SMU_BASE 0xe0110000
+#define SMU_GENERAL_REG0 0x7c0
 
 static int __cpuinit emev2_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
@@ -38,13 +40,18 @@ static int __cpuinit emev2_boot_secondary(unsigned int cpu, struct task_struct *
 
 static void __init emev2_smp_prepare_cpus(unsigned int max_cpus)
 {
+	void __iomem *smu;
+
 	/* setup EMEV2 specific SCU base, enable */
 	shmobile_scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE);
 	scu_enable(shmobile_scu_base);
 
 	/* Tell ROM loader about our vector (in headsmp-scu.S, headsmp.S) */
-	emev2_clock_init(); /* need ioremapped SMU */
-	emev2_set_boot_vector(__pa(shmobile_boot_vector));
+	smu = ioremap(EMEV2_SMU_BASE, PAGE_SIZE);
+	if (smu) {
+		iowrite32(__pa(shmobile_boot_vector), smu + SMU_GENERAL_REG0);
+		iounmap(smu);
+	}
 	shmobile_boot_fn = virt_to_phys(shmobile_boot_scu);
 	shmobile_boot_arg = (unsigned long)shmobile_scu_base;
 
-- 
cgit v1.2.2


From 9a1456242c7c644d0032032ba80e8538b8322d3c Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Wed, 26 Jun 2013 16:40:53 +0200
Subject: ARM: shmobile: r8a7740: add MMCIF DMA definitions

Add DMA channel slave IDs and configuration entries for the r8a7740
MMCIF controller.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/include/mach/r8a7740.h |  2 ++
 arch/arm/mach-shmobile/setup-r8a7740.c        | 10 ++++++++++
 2 files changed, 12 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/include/mach/r8a7740.h b/arch/arm/mach-shmobile/include/mach/r8a7740.h
index b34d19b5ca5c..56f375005fcd 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7740.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7740.h
@@ -42,6 +42,8 @@ enum {
 	SHDMA_SLAVE_FSIB_TX,
 	SHDMA_SLAVE_USBHS_TX,
 	SHDMA_SLAVE_USBHS_RX,
+	SHDMA_SLAVE_MMCIF_TX,
+	SHDMA_SLAVE_MMCIF_RX,
 };
 
 extern void r8a7740_meram_workaround(void);
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index ac29c2ee011f..84c5bb6d9725 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -588,6 +588,16 @@ static const struct sh_dmae_slave_config r8a7740_dmae_slaves[] = {
 		.addr		= 0xfe1f0064,
 		.chcr		= CHCR_TX(XMIT_SZ_32BIT),
 		.mid_rid	= 0xb5,
+	}, {
+		.slave_id	= SHDMA_SLAVE_MMCIF_TX,
+		.addr		= 0xe6bd0034,
+		.chcr		= CHCR_TX(XMIT_SZ_32BIT),
+		.mid_rid	= 0xd1,
+	}, {
+		.slave_id	= SHDMA_SLAVE_MMCIF_RX,
+		.addr		= 0xe6bd0034,
+		.chcr		= CHCR_RX(XMIT_SZ_32BIT),
+		.mid_rid	= 0xd2,
 	},
 };
 
-- 
cgit v1.2.2


From 512e53bc7f0088e3adfd89b3fea3447495fc8423 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Fri, 12 Jul 2013 01:22:19 +0900
Subject: ARM: shmobile: Introduce r8a7790_read_mode_pins()

Break out the r8a7790 boot mode code into a separate
function so it can be shared by multiple users.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7790.c        | 11 ++---------
 arch/arm/mach-shmobile/include/mach/r8a7790.h |  3 +++
 arch/arm/mach-shmobile/setup-r8a7790.c        | 14 ++++++++++++++
 3 files changed, 19 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c
index 62d8162c7e70..50d96f9cf981 100644
--- a/arch/arm/mach-shmobile/clock-r8a7790.c
+++ b/arch/arm/mach-shmobile/clock-r8a7790.c
@@ -24,6 +24,7 @@
 #include <linux/clkdev.h>
 #include <mach/clock.h>
 #include <mach/common.h>
+#include <mach/r8a7790.h>
 
 /*
  *   MD		EXTAL		PLL0	PLL1	PLL3
@@ -42,8 +43,6 @@
  *	see "p1 / 2" on R8A7790_CLOCK_ROOT() below
  */
 
-#define MD(nr)	(1 << nr)
-
 #define CPG_BASE 0xe6150000
 #define CPG_LEN 0x1000
 
@@ -53,7 +52,6 @@
 #define SMSTPCR5 0xe6150144
 #define SMSTPCR7 0xe615014c
 
-#define MODEMR		0xE6160060
 #define SDCKCR		0xE6150074
 #define SD2CKCR		0xE6150078
 #define SD3CKCR		0xE615007C
@@ -288,14 +286,9 @@ static struct clk_lookup lookups[] = {
 
 void __init r8a7790_clock_init(void)
 {
-	void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE);
-	u32 mode;
+	u32 mode = r8a7790_read_mode_pins();
 	int k, ret = 0;
 
-	BUG_ON(!modemr);
-	mode = ioread32(modemr);
-	iounmap(modemr);
-
 	switch (mode & (MD(14) | MD(13))) {
 	case 0:
 		R8A7790_CLOCK_ROOT(15, &extal_clk, 172, 208, 106, 88);
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7790.h b/arch/arm/mach-shmobile/include/mach/r8a7790.h
index 7851cc1bc9fb..7aaef409a059 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7790.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7790.h
@@ -7,4 +7,7 @@ void r8a7790_pinmux_init(void);
 void r8a7790_init_delay(void);
 void r8a7790_timer_init(void);
 
+#define MD(nr) BIT(nr)
+u32 r8a7790_read_mode_pins(void);
+
 #endif /* __ASM_R8A7790_H__ */
diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index f01542e13e58..6acddc139d88 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -196,6 +196,20 @@ void __init r8a7790_add_standard_devices(void)
 	r8a7790_register_cmt(00);
 }
 
+#define MODEMR 0xe6160060
+
+u32 __init r8a7790_read_mode_pins(void)
+{
+	void __iomem *modemr = ioremap_nocache(MODEMR, 4);
+	u32 mode;
+
+	BUG_ON(!modemr);
+	mode = ioread32(modemr);
+	iounmap(modemr);
+
+	return mode;
+}
+
 void __init r8a7790_timer_init(void)
 {
 	void __iomem *cntcr;
-- 
cgit v1.2.2


From 81b9d5351fa96caad4accc6711bc1b9342927d4a Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Fri, 12 Jul 2013 01:22:29 +0900
Subject: ARM: shmobile: Setup r8a7790 arch timer based on MD pins

Update the r8a7790 arch timer setup code to configure the
frequency dynamically at boot time. This means that the arch
timer driver will be able to detect a timer frequency that
has been calculated based on the MD pins instead of a fixed
and potentially incorrect 13 MHz.

With this patch applied the Linux kernel will correctly
support the r8a7790 Lager board that uses a 20 Mhz EXTAL.
The arch timer will operate on 10 MHz and the Linux arch
timer driver will be correctly configured to use 10 MHz.

Without this patch the 20 MHz EXTAL will be used to drive
the arch timer at 10 MHz, but the Linux arch timer driver
will believe it is counting at 13 Mhz.

Reported-by: Ulrich Hecht <ulrich.hecht@gmail.com>
Signed-off-by: Magnus Damm <damm@opensource.se>
Tested-by: Ulrich Hecht <ulrich.hecht@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-r8a7790.c | 51 ++++++++++++++++++++++++++++++----
 1 file changed, 45 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index 6acddc139d88..4c96dad21195 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -210,14 +210,53 @@ u32 __init r8a7790_read_mode_pins(void)
 	return mode;
 }
 
+#define CNTCR 0
+#define CNTFID0 0x20
+
 void __init r8a7790_timer_init(void)
 {
-	void __iomem *cntcr;
-
-	/* make sure arch timer is started by setting bit 0 of CNTCT */
-	cntcr = ioremap(0xe6080000, PAGE_SIZE);
-	iowrite32(1, cntcr);
-	iounmap(cntcr);
+#ifdef CONFIG_ARM_ARCH_TIMER
+	u32 mode = r8a7790_read_mode_pins();
+	void __iomem *base;
+	int extal_mhz = 0;
+	u32 freq;
+
+	/* At Linux boot time the r8a7790 arch timer comes up
+	 * with the counter disabled. Moreover, it may also report
+	 * a potentially incorrect fixed 13 MHz frequency. To be
+	 * correct these registers need to be updated to use the
+	 * frequency EXTAL / 2 which can be determined by the MD pins.
+	 */
+
+	switch (mode & (MD(14) | MD(13))) {
+	case 0:
+		extal_mhz = 15;
+		break;
+	case MD(13):
+		extal_mhz = 20;
+		break;
+	case MD(14):
+		extal_mhz = 26;
+		break;
+	case MD(13) | MD(14):
+		extal_mhz = 30;
+		break;
+	}
+
+	/* The arch timer frequency equals EXTAL / 2 */
+	freq = extal_mhz * (1000000 / 2);
+
+	/* Remap "armgcnt address map" space */
+	base = ioremap(0xe6080000, PAGE_SIZE);
+
+	/* Update registers with correct frequency */
+	iowrite32(freq, base + CNTFID0);
+	asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq));
+
+	/* make sure arch timer is started by setting bit 0 of CNTCR */
+	iowrite32(1, base + CNTCR);
+	iounmap(base);
+#endif /* CONFIG_ARM_ARCH_TIMER */
 
 	shmobile_timer_init();
 }
-- 
cgit v1.2.2