From 9ce8bb55e32d11bb82e19e76bdd2cf1c2ed32fd1 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 27 Jan 2009 22:44:12 +0000 Subject: [ARM] msm: fix build errors arch/arm/mach-msm/board-halibut.c:45: error: implicit declaration of function 'MSM_GPIO_TO_INT' arch/arm/mach-msm/board-halibut.c:45: error: initializer element is not constant arch/arm/mach-msm/board-halibut.c:45: error: (near initialization for 'smc91x_resources[1].start') arch/arm/mach-msm/board-halibut.c:46: error: initializer element is not constant arch/arm/mach-msm/board-halibut.c:46: error: (near initialization for 'smc91x_resources[1].end') Signed-off-by: Russell King --- arch/arm/mach-msm/board-halibut.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c index c2a96e3965a6..e61967dde9a1 100644 --- a/arch/arm/mach-msm/board-halibut.c +++ b/arch/arm/mach-msm/board-halibut.c @@ -27,6 +27,7 @@ #include #include +#include #include #include -- cgit v1.2.2 From ecbab71c521819716e204659dfe72fc39d00630a Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 27 Jan 2009 23:20:00 +0000 Subject: [ARM] call undefined instruction exception handler with irqs enabled Aaro says: > With spinlock debugs enabled I get might_sleep() warnings when using > ptrace. tracked down to a missing enable_irq before calling do_undefinstr(). Reported-by: Aaro Koskinen Tested-by: Aaro Koskinen Signed-off-by: Russell King --- arch/arm/kernel/entry-armv.S | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 77b047475539..85040cfeb5e5 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -650,6 +650,7 @@ ENTRY(fp_enter) no_fp: mov pc, lr __und_usr_unknown: + enable_irq mov r0, sp adr lr, ret_from_exception b do_undefinstr -- cgit v1.2.2 From 08e445bd6a98fa09befe0cf6d67705324f913fc6 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Fri, 16 Jan 2009 23:02:54 +0100 Subject: [ARM] 5366/1: fix shared memory coherency with VIVT L1 + L2 caches When there are multiple L1-aliasing userland mappings of the same physical page, we currently remap each of them uncached, to prevent VIVT cache aliasing issues. (E.g. writes to one of the mappings not being immediately visible via another mapping.) However, when we do this remapping, there could still be stale data in the L2 cache, and an uncached mapping might bypass L2 and go straight to RAM. This would cause reads from such mappings to see old data (until the dirty L2 line is eventually evicted.) This issue is solved by forcing a L2 cache flush whenever the shared page is made L1 uncacheable. Ideally, we would make L1 uncacheable and L2 cacheable as L2 is PIPT. But Feroceon does not support that combination, and the TEX=5 C=0 B=0 encoding for XSc3 doesn't appear to work in practice. Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/mm/fault-armv.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c index 81d0b8772de3..bc0099d5ae85 100644 --- a/arch/arm/mm/fault-armv.c +++ b/arch/arm/mm/fault-armv.c @@ -66,7 +66,10 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address) * fault (ie, is old), we can safely ignore any issues. */ if (ret && (pte_val(entry) & L_PTE_MT_MASK) != shared_pte_mask) { - flush_cache_page(vma, address, pte_pfn(entry)); + unsigned long pfn = pte_pfn(entry); + flush_cache_page(vma, address, pfn); + outer_flush_range((pfn << PAGE_SHIFT), + (pfn << PAGE_SHIFT) + PAGE_SIZE); pte_val(entry) &= ~L_PTE_MT_MASK; pte_val(entry) |= shared_pte_mask; set_pte_at(vma->vm_mm, address, pte, entry); -- cgit v1.2.2 From 3eb8057bbafc64dbf09d5c18513aa80c1b7f2fcb Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 21 Jan 2009 21:30:23 -0800 Subject: sparc64: Move generic PCR support code to seperate file. It all lives in the oprofile support code currently and we will need to share this stuff with NMI watchdog and perf_counter support. Signed-off-by: David S. Miller --- arch/sparc/include/asm/pcr.h | 30 ++++++++++ arch/sparc/include/asm/pil.h | 1 + arch/sparc/kernel/Makefile | 1 + arch/sparc/kernel/pcr.c | 140 +++++++++++++++++++++++++++++++++++++++++++ arch/sparc/kernel/ttable.S | 3 +- arch/sparc/oprofile/init.c | 110 +--------------------------------- 6 files changed, 177 insertions(+), 108 deletions(-) create mode 100644 arch/sparc/include/asm/pcr.h create mode 100644 arch/sparc/kernel/pcr.c (limited to 'arch') diff --git a/arch/sparc/include/asm/pcr.h b/arch/sparc/include/asm/pcr.h new file mode 100644 index 000000000000..4249bb523ef1 --- /dev/null +++ b/arch/sparc/include/asm/pcr.h @@ -0,0 +1,30 @@ +#ifndef __PCR_H +#define __PCR_H + +struct pcr_ops { + u64 (*read)(void); + void (*write)(u64); +}; +extern const struct pcr_ops *pcr_ops; + +extern void deferred_pcr_work_irq(int irq, struct pt_regs *regs); +extern void schedule_deferred_pcr_work(void); + +#define PCR_PIC_PRIV 0x00000001 /* PIC access is privileged */ +#define PCR_STRACE 0x00000002 /* Trace supervisor events */ +#define PCR_UTRACE 0x00000004 /* Trace user events */ +#define PCR_N2_HTRACE 0x00000008 /* Trace hypervisor events */ +#define PCR_N2_TOE_OV0 0x00000010 /* Trap if PIC 0 overflows */ +#define PCR_N2_TOE_OV1 0x00000020 /* Trap if PIC 1 overflows */ +#define PCR_N2_MASK0 0x00003fc0 +#define PCR_N2_MASK0_SHIFT 6 +#define PCR_N2_SL0 0x0003c000 +#define PCR_N2_SL0_SHIFT 14 +#define PCR_N2_OV0 0x00040000 +#define PCR_N2_MASK1 0x07f80000 +#define PCR_N2_MASK1_SHIFT 19 +#define PCR_N2_SL1 0x78000000 +#define PCR_N2_SL1_SHIFT 27 +#define PCR_N2_OV1 0x80000000 + +#endif /* __PCR_H */ diff --git a/arch/sparc/include/asm/pil.h b/arch/sparc/include/asm/pil.h index d573820c0ff4..32a7efe76d00 100644 --- a/arch/sparc/include/asm/pil.h +++ b/arch/sparc/include/asm/pil.h @@ -23,6 +23,7 @@ #define PIL_SMP_CTX_NEW_VERSION 4 #define PIL_DEVICE_IRQ 5 #define PIL_SMP_CALL_FUNC_SNGL 6 +#define PIL_DEFERRED_PCR_WORK 7 #define PIL_NORMAL_MAX 14 #define PIL_NMI 15 diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile index 53adcaa0348b..cb182d9c2f2b 100644 --- a/arch/sparc/kernel/Makefile +++ b/arch/sparc/kernel/Makefile @@ -52,6 +52,7 @@ obj-$(CONFIG_SPARC64) += visemul.o obj-$(CONFIG_SPARC64) += hvapi.o obj-$(CONFIG_SPARC64) += sstate.o obj-$(CONFIG_SPARC64) += mdesc.o +obj-$(CONFIG_SPARC64) += pcr.o # sparc32 do not use GENERIC_HARDIRQS but uses the generic devres implementation obj-$(CONFIG_SPARC32) += devres.o diff --git a/arch/sparc/kernel/pcr.c b/arch/sparc/kernel/pcr.c new file mode 100644 index 000000000000..c4f24703b165 --- /dev/null +++ b/arch/sparc/kernel/pcr.c @@ -0,0 +1,140 @@ +/* pcr.c: Generic sparc64 performance counter infrastructure. + * + * Copyright (C) 2009 David S. Miller (davem@davemloft.net) + */ +#include +#include +#include +#include + +#include +#include + +/* This code is shared between various users of the performance + * counters. Users will be oprofile, pseudo-NMI watchdog, and the + * perf_counter support layer. + */ + +/* Performance counter interrupts run unmasked at PIL level 15. + * Therefore we can't do things like wakeups and other work + * that expects IRQ disabling to be adhered to in locking etc. + * + * Therefore in such situations we defer the work by signalling + * a lower level cpu IRQ. + */ +void deferred_pcr_work_irq(int irq, struct pt_regs *regs) +{ + clear_softint(1 << PIL_DEFERRED_PCR_WORK); +} + +void schedule_deferred_pcr_work(void) +{ + set_softint(1 << PIL_DEFERRED_PCR_WORK); +} + +const struct pcr_ops *pcr_ops; +EXPORT_SYMBOL_GPL(pcr_ops); + +static u64 direct_pcr_read(void) +{ + u64 val; + + read_pcr(val); + return val; +} + +static void direct_pcr_write(u64 val) +{ + write_pcr(val); +} + +static const struct pcr_ops direct_pcr_ops = { + .read = direct_pcr_read, + .write = direct_pcr_write, +}; + +static void n2_pcr_write(u64 val) +{ + unsigned long ret; + + ret = sun4v_niagara2_setperf(HV_N2_PERF_SPARC_CTL, val); + if (val != HV_EOK) + write_pcr(val); +} + +static const struct pcr_ops n2_pcr_ops = { + .read = direct_pcr_read, + .write = n2_pcr_write, +}; + +static unsigned long perf_hsvc_group; +static unsigned long perf_hsvc_major; +static unsigned long perf_hsvc_minor; + +static int __init register_perf_hsvc(void) +{ + if (tlb_type == hypervisor) { + switch (sun4v_chip_type) { + case SUN4V_CHIP_NIAGARA1: + perf_hsvc_group = HV_GRP_NIAG_PERF; + break; + + case SUN4V_CHIP_NIAGARA2: + perf_hsvc_group = HV_GRP_N2_CPU; + break; + + default: + return -ENODEV; + } + + + perf_hsvc_major = 1; + perf_hsvc_minor = 0; + if (sun4v_hvapi_register(perf_hsvc_group, + perf_hsvc_major, + &perf_hsvc_minor)) { + printk("perfmon: Could not register hvapi.\n"); + return -ENODEV; + } + } + return 0; +} + +static void __init unregister_perf_hsvc(void) +{ + if (tlb_type != hypervisor) + return; + sun4v_hvapi_unregister(perf_hsvc_group); +} + +int __init pcr_arch_init(void) +{ + int err = register_perf_hsvc(); + + if (err) + return err; + + switch (tlb_type) { + case hypervisor: + pcr_ops = &n2_pcr_ops; + break; + + case spitfire: + case cheetah: + case cheetah_plus: + pcr_ops = &direct_pcr_ops; + break; + + default: + err = -ENODEV; + goto out_unregister; + } + + return 0; + +out_unregister: + unregister_perf_hsvc(); + return err; +} + +arch_initcall(pcr_arch_init); diff --git a/arch/sparc/kernel/ttable.S b/arch/sparc/kernel/ttable.S index ea925503b42e..d9bdfb9d5c18 100644 --- a/arch/sparc/kernel/ttable.S +++ b/arch/sparc/kernel/ttable.S @@ -63,7 +63,8 @@ tl0_irq6: TRAP_IRQ(smp_call_function_single_client, 6) #else tl0_irq6: BTRAP(0x46) #endif -tl0_irq7: BTRAP(0x47) BTRAP(0x48) BTRAP(0x49) +tl0_irq7: TRAP_IRQ(deferred_pcr_work_irq, 7) +tl0_irq8: BTRAP(0x48) BTRAP(0x49) tl0_irq10: BTRAP(0x4a) BTRAP(0x4b) BTRAP(0x4c) BTRAP(0x4d) tl0_irq14: TRAP_IRQ(timer_interrupt, 14) tl0_irq15: TRAP_NMI_IRQ(perfctr_irq, 15) diff --git a/arch/sparc/oprofile/init.c b/arch/sparc/oprofile/init.c index d6e170c074fc..c8877a5202b0 100644 --- a/arch/sparc/oprofile/init.c +++ b/arch/sparc/oprofile/init.c @@ -17,47 +17,10 @@ #include #include #include +#include static int nmi_enabled; -struct pcr_ops { - u64 (*read)(void); - void (*write)(u64); -}; -static const struct pcr_ops *pcr_ops; - -static u64 direct_pcr_read(void) -{ - u64 val; - - read_pcr(val); - return val; -} - -static void direct_pcr_write(u64 val) -{ - write_pcr(val); -} - -static const struct pcr_ops direct_pcr_ops = { - .read = direct_pcr_read, - .write = direct_pcr_write, -}; - -static void n2_pcr_write(u64 val) -{ - unsigned long ret; - - ret = sun4v_niagara2_setperf(HV_N2_PERF_SPARC_CTL, val); - if (val != HV_EOK) - write_pcr(val); -} - -static const struct pcr_ops n2_pcr_ops = { - .read = direct_pcr_read, - .write = n2_pcr_write, -}; - /* In order to commonize as much of the implementation as * possible, we use PICH as our counter. Mostly this is * to accomodate Niagara-1 which can only count insn cycles @@ -70,30 +33,13 @@ static u64 picl_value(void) return ((u64)((0 - delta) & 0xffffffff)) << 32; } -#define PCR_PIC_PRIV 0x00000001 /* PIC access is privileged */ -#define PCR_STRACE 0x00000002 /* Trace supervisor events */ -#define PCR_UTRACE 0x00000004 /* Trace user events */ -#define PCR_N2_HTRACE 0x00000008 /* Trace hypervisor events */ -#define PCR_N2_TOE_OV0 0x00000010 /* Trap if PIC 0 overflows */ -#define PCR_N2_TOE_OV1 0x00000020 /* Trap if PIC 1 overflows */ -#define PCR_N2_MASK0 0x00003fc0 -#define PCR_N2_MASK0_SHIFT 6 -#define PCR_N2_SL0 0x0003c000 -#define PCR_N2_SL0_SHIFT 14 -#define PCR_N2_OV0 0x00040000 -#define PCR_N2_MASK1 0x07f80000 -#define PCR_N2_MASK1_SHIFT 19 -#define PCR_N2_SL1 0x78000000 -#define PCR_N2_SL1_SHIFT 27 -#define PCR_N2_OV1 0x80000000 - #define PCR_SUN4U_ENABLE (PCR_PIC_PRIV | PCR_STRACE | PCR_UTRACE) #define PCR_N2_ENABLE (PCR_PIC_PRIV | PCR_STRACE | PCR_UTRACE | \ PCR_N2_TOE_OV1 | \ (2 << PCR_N2_SL1_SHIFT) | \ (0xff << PCR_N2_MASK1_SHIFT)) -static u64 pcr_enable = PCR_SUN4U_ENABLE; +static u64 pcr_enable; static void nmi_handler(struct pt_regs *regs) { @@ -153,62 +99,16 @@ static void nmi_stop(void) synchronize_sched(); } -static unsigned long perf_hsvc_group; -static unsigned long perf_hsvc_major; -static unsigned long perf_hsvc_minor; - -static int __init register_perf_hsvc(void) -{ - if (tlb_type == hypervisor) { - switch (sun4v_chip_type) { - case SUN4V_CHIP_NIAGARA1: - perf_hsvc_group = HV_GRP_NIAG_PERF; - break; - - case SUN4V_CHIP_NIAGARA2: - perf_hsvc_group = HV_GRP_N2_CPU; - break; - - default: - return -ENODEV; - } - - - perf_hsvc_major = 1; - perf_hsvc_minor = 0; - if (sun4v_hvapi_register(perf_hsvc_group, - perf_hsvc_major, - &perf_hsvc_minor)) { - printk("perfmon: Could not register N2 hvapi.\n"); - return -ENODEV; - } - } - return 0; -} - -static void unregister_perf_hsvc(void) -{ - if (tlb_type != hypervisor) - return; - sun4v_hvapi_unregister(perf_hsvc_group); -} - static int oprofile_nmi_init(struct oprofile_operations *ops) { - int err = register_perf_hsvc(); - - if (err) - return err; - switch (tlb_type) { case hypervisor: - pcr_ops = &n2_pcr_ops; pcr_enable = PCR_N2_ENABLE; break; case cheetah: case cheetah_plus: - pcr_ops = &direct_pcr_ops; + pcr_enable = PCR_SUN4U_ENABLE; break; default: @@ -241,10 +141,6 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) return ret; } - void oprofile_arch_exit(void) { -#ifdef CONFIG_SPARC64 - unregister_perf_hsvc(); -#endif } -- cgit v1.2.2 From c3cf5e8cc56d272f828a66610bb78bbb727b2ce1 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 21 Jan 2009 23:16:40 -0800 Subject: sparc: Probe PMU type and record in sparc_pmu_type. Signed-off-by: David S. Miller --- arch/sparc/kernel/cpu.c | 33 ++++++++++++++++++++++----------- arch/sparc/kernel/kernel.h | 1 + arch/sparc/kernel/setup_64.c | 2 ++ 3 files changed, 25 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/sparc/kernel/cpu.c b/arch/sparc/kernel/cpu.c index 32d32b4824f5..d85c3dc4953a 100644 --- a/arch/sparc/kernel/cpu.c +++ b/arch/sparc/kernel/cpu.c @@ -26,6 +26,7 @@ EXPORT_PER_CPU_SYMBOL(__cpu_data); struct cpu_info { int psr_vers; const char *name; + const char *pmu_name; }; struct fpu_info { @@ -45,6 +46,9 @@ struct manufacturer_info { #define CPU(ver, _name) \ { .psr_vers = ver, .name = _name } +#define CPU_PMU(ver, _name, _pmu_name) \ +{ .psr_vers = ver, .name = _name, .pmu_name = _pmu_name } + #define FPU(ver, _name) \ { .fp_vers = ver, .name = _name } @@ -183,10 +187,10 @@ static const struct manufacturer_info __initconst manufacturer_info[] = { },{ 0x17, .cpu_info = { - CPU(0x10, "TI UltraSparc I (SpitFire)"), - CPU(0x11, "TI UltraSparc II (BlackBird)"), - CPU(0x12, "TI UltraSparc IIi (Sabre)"), - CPU(0x13, "TI UltraSparc IIe (Hummingbird)"), + CPU_PMU(0x10, "TI UltraSparc I (SpitFire)", "ultra12"), + CPU_PMU(0x11, "TI UltraSparc II (BlackBird)", "ultra12"), + CPU_PMU(0x12, "TI UltraSparc IIi (Sabre)", "ultra12"), + CPU_PMU(0x13, "TI UltraSparc IIe (Hummingbird)", "ultra12"), CPU(-1, NULL) }, .fpu_info = { @@ -199,7 +203,7 @@ static const struct manufacturer_info __initconst manufacturer_info[] = { },{ 0x22, .cpu_info = { - CPU(0x10, "TI UltraSparc I (SpitFire)"), + CPU_PMU(0x10, "TI UltraSparc I (SpitFire)", "ultra12"), CPU(-1, NULL) }, .fpu_info = { @@ -209,12 +213,12 @@ static const struct manufacturer_info __initconst manufacturer_info[] = { },{ 0x3e, .cpu_info = { - CPU(0x14, "TI UltraSparc III (Cheetah)"), - CPU(0x15, "TI UltraSparc III+ (Cheetah+)"), - CPU(0x16, "TI UltraSparc IIIi (Jalapeno)"), - CPU(0x18, "TI UltraSparc IV (Jaguar)"), - CPU(0x19, "TI UltraSparc IV+ (Panther)"), - CPU(0x22, "TI UltraSparc IIIi+ (Serrano)"), + CPU_PMU(0x14, "TI UltraSparc III (Cheetah)", "ultra3"), + CPU_PMU(0x15, "TI UltraSparc III+ (Cheetah+)", "ultra3+"), + CPU_PMU(0x16, "TI UltraSparc IIIi (Jalapeno)", "ultra3i"), + CPU_PMU(0x18, "TI UltraSparc IV (Jaguar)", "ultra3+"), + CPU_PMU(0x19, "TI UltraSparc IV+ (Panther)", "ultra4+"), + CPU_PMU(0x22, "TI UltraSparc IIIi+ (Serrano)", "ultra3i"), CPU(-1, NULL) }, .fpu_info = { @@ -234,6 +238,7 @@ static const struct manufacturer_info __initconst manufacturer_info[] = { const char *sparc_cpu_type; const char *sparc_fpu_type; +const char *sparc_pmu_type; unsigned int fsr_storage; @@ -244,6 +249,7 @@ static void set_cpu_and_fpu(int psr_impl, int psr_vers, int fpu_vers) sparc_cpu_type = NULL; sparc_fpu_type = NULL; + sparc_pmu_type = NULL; manuf = NULL; for (i = 0; i < ARRAY_SIZE(manufacturer_info); i++) @@ -263,6 +269,7 @@ static void set_cpu_and_fpu(int psr_impl, int psr_vers, int fpu_vers) { if (cpu->psr_vers == psr_vers) { sparc_cpu_type = cpu->name; + sparc_pmu_type = cpu->pmu_name; sparc_fpu_type = "No FPU"; break; } @@ -290,6 +297,8 @@ static void set_cpu_and_fpu(int psr_impl, int psr_vers, int fpu_vers) psr_impl, fpu_vers); sparc_fpu_type = "Unknown FPU"; } + if (sparc_pmu_type == NULL) + sparc_pmu_type = "Unknown PMU"; } #ifdef CONFIG_SPARC32 @@ -315,11 +324,13 @@ static void __init sun4v_cpu_probe(void) case SUN4V_CHIP_NIAGARA1: sparc_cpu_type = "UltraSparc T1 (Niagara)"; sparc_fpu_type = "UltraSparc T1 integrated FPU"; + sparc_pmu_type = "niagara"; break; case SUN4V_CHIP_NIAGARA2: sparc_cpu_type = "UltraSparc T2 (Niagara2)"; sparc_fpu_type = "UltraSparc T2 integrated FPU"; + sparc_pmu_type = "niagara2"; break; default: diff --git a/arch/sparc/kernel/kernel.h b/arch/sparc/kernel/kernel.h index 81a972e8d8ea..15d8a3f645c9 100644 --- a/arch/sparc/kernel/kernel.h +++ b/arch/sparc/kernel/kernel.h @@ -5,6 +5,7 @@ /* cpu.c */ extern const char *sparc_cpu_type; +extern const char *sparc_pmu_type; extern const char *sparc_fpu_type; extern unsigned int fsr_storage; diff --git a/arch/sparc/kernel/setup_64.c b/arch/sparc/kernel/setup_64.c index 49d061f4ae9d..f2bcfd2967d7 100644 --- a/arch/sparc/kernel/setup_64.c +++ b/arch/sparc/kernel/setup_64.c @@ -354,6 +354,7 @@ static int show_cpuinfo(struct seq_file *m, void *__unused) seq_printf(m, "cpu\t\t: %s\n" "fpu\t\t: %s\n" + "pmu\t\t: %s\n" "prom\t\t: %s\n" "type\t\t: %s\n" "ncpus probed\t: %d\n" @@ -366,6 +367,7 @@ static int show_cpuinfo(struct seq_file *m, void *__unused) , sparc_cpu_type, sparc_fpu_type, + sparc_pmu_type, prom_version, ((tlb_type == hypervisor) ? "sun4v" : -- cgit v1.2.2 From 06151158f2da4764479b4ec01688dc4bade6ce9d Mon Sep 17 00:00:00 2001 From: "Stanley.Miao" Date: Thu, 29 Jan 2009 08:57:12 -0800 Subject: ARM: OMAP: Fix McBSP spin_lock deadlock A spin_lock deadlock will occur when omap_mcbsp_request() is invoked. omap_mcbsp_request() \- clk_enable(mcbsp->clk) [takes and holds clockfw_lock] \- omap2_clk_enable() \- _omap2_clk_enable() \- omap_mcbsp_clk_enable() \- clk_enable(child clock) [tries for clockfw_lock again] mcbsp_clk is a virtual clock and it comprises several child clocks. when enable mcbsp_clk in omap_mcbsp_request(), the enable function of mcbsp_clk will enable its child clocks, then the deadlock occurs. The solution is to remove the virtual clock and enable these child clocks in omap_mcbsp_request() directly. Signed-off-by: Stanley.Miao Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/mcbsp.c | 98 +++------------------ arch/arm/mach-omap2/mcbsp.c | 145 ++++++-------------------------- arch/arm/plat-omap/include/mach/mcbsp.h | 6 +- arch/arm/plat-omap/mcbsp.c | 52 +++++++++--- 4 files changed, 78 insertions(+), 223 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index ca7a0cc1707c..575ba31295cf 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -28,81 +28,8 @@ #define DPS_RSTCT2_PER_EN (1 << 0) #define DSP_RSTCT2_WD_PER_EN (1 << 1) -struct mcbsp_internal_clk { - struct clk clk; - struct clk **childs; - int n_childs; -}; - #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) -static void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk) -{ - const char *clk_names[] = { "dsp_ck", "api_ck", "dspxor_ck" }; - int i; - - mclk->n_childs = ARRAY_SIZE(clk_names); - mclk->childs = kzalloc(mclk->n_childs * sizeof(struct clk *), - GFP_KERNEL); - - for (i = 0; i < mclk->n_childs; i++) { - /* We fake a platform device to get correct device id */ - struct platform_device pdev; - - pdev.dev.bus = &platform_bus_type; - pdev.id = mclk->clk.id; - mclk->childs[i] = clk_get(&pdev.dev, clk_names[i]); - if (IS_ERR(mclk->childs[i])) - printk(KERN_ERR "Could not get clock %s (%d).\n", - clk_names[i], mclk->clk.id); - } -} - -static int omap_mcbsp_clk_enable(struct clk *clk) -{ - struct mcbsp_internal_clk *mclk = container_of(clk, - struct mcbsp_internal_clk, clk); - int i; - - for (i = 0; i < mclk->n_childs; i++) - clk_enable(mclk->childs[i]); - return 0; -} - -static void omap_mcbsp_clk_disable(struct clk *clk) -{ - struct mcbsp_internal_clk *mclk = container_of(clk, - struct mcbsp_internal_clk, clk); - int i; - - for (i = 0; i < mclk->n_childs; i++) - clk_disable(mclk->childs[i]); -} - -static struct mcbsp_internal_clk omap_mcbsp_clks[] = { - { - .clk = { - .name = "mcbsp_clk", - .id = 1, - .enable = omap_mcbsp_clk_enable, - .disable = omap_mcbsp_clk_disable, - }, - }, - { - .clk = { - .name = "mcbsp_clk", - .id = 3, - .enable = omap_mcbsp_clk_enable, - .disable = omap_mcbsp_clk_disable, - }, - }, -}; - -#define omap_mcbsp_clks_size ARRAY_SIZE(omap_mcbsp_clks) -#else -#define omap_mcbsp_clks_size 0 -static struct mcbsp_internal_clk __initdata *omap_mcbsp_clks; -static inline void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk) -{ } +const char *clk_names[] = { "dsp_ck", "api_ck", "dspxor_ck" }; #endif static void omap1_mcbsp_request(unsigned int id) @@ -167,8 +94,9 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = { .rx_irq = INT_McBSP1RX, .tx_irq = INT_McBSP1TX, .ops = &omap1_mcbsp_ops, - .clk_name = "mcbsp_clk", - }, + .clk_names = clk_names, + .num_clks = 3, + }, { .phys_base = OMAP1510_MCBSP2_BASE, .dma_rx_sync = OMAP_DMA_MCBSP2_RX, @@ -184,7 +112,8 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = { .rx_irq = INT_McBSP3RX, .tx_irq = INT_McBSP3TX, .ops = &omap1_mcbsp_ops, - .clk_name = "mcbsp_clk", + .clk_names = clk_names, + .num_clks = 3, }, }; #define OMAP15XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap15xx_mcbsp_pdata) @@ -202,7 +131,8 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { .rx_irq = INT_McBSP1RX, .tx_irq = INT_McBSP1TX, .ops = &omap1_mcbsp_ops, - .clk_name = "mcbsp_clk", + .clk_names = clk_names, + .num_clks = 3, }, { .phys_base = OMAP1610_MCBSP2_BASE, @@ -219,7 +149,8 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { .rx_irq = INT_McBSP3RX, .tx_irq = INT_McBSP3TX, .ops = &omap1_mcbsp_ops, - .clk_name = "mcbsp_clk", + .clk_names = clk_names, + .num_clks = 3, }, }; #define OMAP16XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap16xx_mcbsp_pdata) @@ -230,15 +161,6 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { int __init omap1_mcbsp_init(void) { - int i; - - for (i = 0; i < omap_mcbsp_clks_size; i++) { - if (cpu_is_omap15xx() || cpu_is_omap16xx()) { - omap_mcbsp_clk_init(&omap_mcbsp_clks[i]); - clk_register(&omap_mcbsp_clks[i].clk); - } - } - if (cpu_is_omap730()) omap_mcbsp_count = OMAP730_MCBSP_PDATA_SZ; if (cpu_is_omap15xx()) diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index e20023c9d15d..a9e631fc1134 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -24,106 +24,7 @@ #include #include -struct mcbsp_internal_clk { - struct clk clk; - struct clk **childs; - int n_childs; -}; - -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) -static void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk) -{ - const char *clk_names[] = { "mcbsp_ick", "mcbsp_fck" }; - int i; - - mclk->n_childs = ARRAY_SIZE(clk_names); - mclk->childs = kzalloc(mclk->n_childs * sizeof(struct clk *), - GFP_KERNEL); - - for (i = 0; i < mclk->n_childs; i++) { - /* We fake a platform device to get correct device id */ - struct platform_device pdev; - - pdev.dev.bus = &platform_bus_type; - pdev.id = mclk->clk.id; - mclk->childs[i] = clk_get(&pdev.dev, clk_names[i]); - if (IS_ERR(mclk->childs[i])) - printk(KERN_ERR "Could not get clock %s (%d).\n", - clk_names[i], mclk->clk.id); - } -} - -static int omap_mcbsp_clk_enable(struct clk *clk) -{ - struct mcbsp_internal_clk *mclk = container_of(clk, - struct mcbsp_internal_clk, clk); - int i; - - for (i = 0; i < mclk->n_childs; i++) - clk_enable(mclk->childs[i]); - return 0; -} - -static void omap_mcbsp_clk_disable(struct clk *clk) -{ - struct mcbsp_internal_clk *mclk = container_of(clk, - struct mcbsp_internal_clk, clk); - int i; - - for (i = 0; i < mclk->n_childs; i++) - clk_disable(mclk->childs[i]); -} - -static struct mcbsp_internal_clk omap_mcbsp_clks[] = { - { - .clk = { - .name = "mcbsp_clk", - .id = 1, - .enable = omap_mcbsp_clk_enable, - .disable = omap_mcbsp_clk_disable, - }, - }, - { - .clk = { - .name = "mcbsp_clk", - .id = 2, - .enable = omap_mcbsp_clk_enable, - .disable = omap_mcbsp_clk_disable, - }, - }, - { - .clk = { - .name = "mcbsp_clk", - .id = 3, - .enable = omap_mcbsp_clk_enable, - .disable = omap_mcbsp_clk_disable, - }, - }, - { - .clk = { - .name = "mcbsp_clk", - .id = 4, - .enable = omap_mcbsp_clk_enable, - .disable = omap_mcbsp_clk_disable, - }, - }, - { - .clk = { - .name = "mcbsp_clk", - .id = 5, - .enable = omap_mcbsp_clk_enable, - .disable = omap_mcbsp_clk_disable, - }, - }, -}; - -#define omap_mcbsp_clks_size ARRAY_SIZE(omap_mcbsp_clks) -#else -#define omap_mcbsp_clks_size 0 -static struct mcbsp_internal_clk __initdata *omap_mcbsp_clks; -static inline void omap_mcbsp_clk_init(struct clk *clk) -{ } -#endif +const char *clk_names[] = { "mcbsp_ick", "mcbsp_fck" }; static void omap2_mcbsp2_mux_setup(void) { @@ -156,7 +57,8 @@ static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP1_IRQ_RX, .tx_irq = INT_24XX_MCBSP1_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_name = "mcbsp_clk", + .clk_names = clk_names, + .num_clks = 2, }, { .phys_base = OMAP24XX_MCBSP2_BASE, @@ -165,7 +67,8 @@ static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP2_IRQ_RX, .tx_irq = INT_24XX_MCBSP2_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_name = "mcbsp_clk", + .clk_names = clk_names, + .num_clks = 2, }, }; #define OMAP2420_MCBSP_PDATA_SZ ARRAY_SIZE(omap2420_mcbsp_pdata) @@ -183,7 +86,8 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP1_IRQ_RX, .tx_irq = INT_24XX_MCBSP1_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_name = "mcbsp_clk", + .clk_names = clk_names, + .num_clks = 2, }, { .phys_base = OMAP24XX_MCBSP2_BASE, @@ -192,7 +96,8 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP2_IRQ_RX, .tx_irq = INT_24XX_MCBSP2_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_name = "mcbsp_clk", + .clk_names = clk_names, + .num_clks = 2, }, { .phys_base = OMAP2430_MCBSP3_BASE, @@ -201,7 +106,8 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP3_IRQ_RX, .tx_irq = INT_24XX_MCBSP3_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_name = "mcbsp_clk", + .clk_names = clk_names, + .num_clks = 2, }, { .phys_base = OMAP2430_MCBSP4_BASE, @@ -210,7 +116,8 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP4_IRQ_RX, .tx_irq = INT_24XX_MCBSP4_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_name = "mcbsp_clk", + .clk_names = clk_names, + .num_clks = 2, }, { .phys_base = OMAP2430_MCBSP5_BASE, @@ -219,7 +126,8 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP5_IRQ_RX, .tx_irq = INT_24XX_MCBSP5_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_name = "mcbsp_clk", + .clk_names = clk_names, + .num_clks = 2, }, }; #define OMAP2430_MCBSP_PDATA_SZ ARRAY_SIZE(omap2430_mcbsp_pdata) @@ -237,7 +145,8 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP1_IRQ_RX, .tx_irq = INT_24XX_MCBSP1_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_name = "mcbsp_clk", + .clk_names = clk_names, + .num_clks = 2, }, { .phys_base = OMAP34XX_MCBSP2_BASE, @@ -246,7 +155,8 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP2_IRQ_RX, .tx_irq = INT_24XX_MCBSP2_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_name = "mcbsp_clk", + .clk_names = clk_names, + .num_clks = 2, }, { .phys_base = OMAP34XX_MCBSP3_BASE, @@ -255,7 +165,8 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP3_IRQ_RX, .tx_irq = INT_24XX_MCBSP3_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_name = "mcbsp_clk", + .clk_names = clk_names, + .num_clks = 2, }, { .phys_base = OMAP34XX_MCBSP4_BASE, @@ -264,7 +175,8 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP4_IRQ_RX, .tx_irq = INT_24XX_MCBSP4_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_name = "mcbsp_clk", + .clk_names = clk_names, + .num_clks = 2, }, { .phys_base = OMAP34XX_MCBSP5_BASE, @@ -273,7 +185,8 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP5_IRQ_RX, .tx_irq = INT_24XX_MCBSP5_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_name = "mcbsp_clk", + .clk_names = clk_names, + .num_clks = 2, }, }; #define OMAP34XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap34xx_mcbsp_pdata) @@ -284,14 +197,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { static int __init omap2_mcbsp_init(void) { - int i; - - for (i = 0; i < omap_mcbsp_clks_size; i++) { - /* Once we call clk_get inside init, we do not register it */ - omap_mcbsp_clk_init(&omap_mcbsp_clks[i]); - clk_register(&omap_mcbsp_clks[i].clk); - } - if (cpu_is_omap2420()) omap_mcbsp_count = OMAP2420_MCBSP_PDATA_SZ; if (cpu_is_omap2430()) diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h index eef873db3d48..113c2466c86a 100644 --- a/arch/arm/plat-omap/include/mach/mcbsp.h +++ b/arch/arm/plat-omap/include/mach/mcbsp.h @@ -344,7 +344,8 @@ struct omap_mcbsp_platform_data { u8 dma_rx_sync, dma_tx_sync; u16 rx_irq, tx_irq; struct omap_mcbsp_ops *ops; - char const *clk_name; + char const **clk_names; + int num_clks; }; struct omap_mcbsp { @@ -376,7 +377,8 @@ struct omap_mcbsp { /* Protect the field .free, while checking if the mcbsp is in use */ spinlock_t lock; struct omap_mcbsp_platform_data *pdata; - struct clk *clk; + struct clk **clks; + int num_clks; }; extern struct omap_mcbsp **mcbsp_ptr; extern int omap_mcbsp_count; diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index f2401a831f99..e5842e30e534 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -214,6 +214,7 @@ EXPORT_SYMBOL(omap_mcbsp_set_io_type); int omap_mcbsp_request(unsigned int id) { struct omap_mcbsp *mcbsp; + int i; int err; if (!omap_mcbsp_check_valid_id(id)) { @@ -225,7 +226,8 @@ int omap_mcbsp_request(unsigned int id) if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->request) mcbsp->pdata->ops->request(id); - clk_enable(mcbsp->clk); + for (i = 0; i < mcbsp->num_clks; i++) + clk_enable(mcbsp->clks[i]); spin_lock(&mcbsp->lock); if (!mcbsp->free) { @@ -276,6 +278,7 @@ EXPORT_SYMBOL(omap_mcbsp_request); void omap_mcbsp_free(unsigned int id) { struct omap_mcbsp *mcbsp; + int i; if (!omap_mcbsp_check_valid_id(id)) { printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); @@ -286,7 +289,8 @@ void omap_mcbsp_free(unsigned int id) if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free) mcbsp->pdata->ops->free(id); - clk_disable(mcbsp->clk); + for (i = mcbsp->num_clks - 1; i >= 0; i--) + clk_disable(mcbsp->clks[i]); spin_lock(&mcbsp->lock); if (mcbsp->free) { @@ -872,6 +876,7 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev) struct omap_mcbsp_platform_data *pdata = pdev->dev.platform_data; struct omap_mcbsp *mcbsp; int id = pdev->id - 1; + int i; int ret = 0; if (!pdata) { @@ -916,14 +921,25 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev) mcbsp->dma_rx_sync = pdata->dma_rx_sync; mcbsp->dma_tx_sync = pdata->dma_tx_sync; - if (pdata->clk_name) - mcbsp->clk = clk_get(&pdev->dev, pdata->clk_name); - if (IS_ERR(mcbsp->clk)) { - dev_err(&pdev->dev, - "Invalid clock configuration for McBSP%d.\n", - mcbsp->id); - ret = PTR_ERR(mcbsp->clk); - goto err_clk; + if (pdata->num_clks) { + mcbsp->num_clks = pdata->num_clks; + mcbsp->clks = kzalloc(mcbsp->num_clks * sizeof(struct clk *), + GFP_KERNEL); + if (!mcbsp->clks) { + ret = -ENOMEM; + goto exit; + } + for (i = 0; i < mcbsp->num_clks; i++) { + mcbsp->clks[i] = clk_get(&pdev->dev, pdata->clk_names[i]); + if (IS_ERR(mcbsp->clks[i])) { + dev_err(&pdev->dev, + "Invalid %s configuration for McBSP%d.\n", + pdata->clk_names[i], mcbsp->id); + ret = PTR_ERR(mcbsp->clks[i]); + goto err_clk; + } + } + } mcbsp->pdata = pdata; @@ -932,6 +948,9 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev) return 0; err_clk: + while (i--) + clk_put(mcbsp->clks[i]); + kfree(mcbsp->clks); iounmap(mcbsp->io_base); err_ioremap: mcbsp->free = 0; @@ -942,6 +961,7 @@ exit: static int __devexit omap_mcbsp_remove(struct platform_device *pdev) { struct omap_mcbsp *mcbsp = platform_get_drvdata(pdev); + int i; platform_set_drvdata(pdev, NULL); if (mcbsp) { @@ -950,12 +970,18 @@ static int __devexit omap_mcbsp_remove(struct platform_device *pdev) mcbsp->pdata->ops->free) mcbsp->pdata->ops->free(mcbsp->id); - clk_disable(mcbsp->clk); - clk_put(mcbsp->clk); + for (i = mcbsp->num_clks - 1; i >= 0; i--) { + clk_disable(mcbsp->clks[i]); + clk_put(mcbsp->clks[i]); + } iounmap(mcbsp->io_base); - mcbsp->clk = NULL; + if (mcbsp->num_clks) { + kfree(mcbsp->clks); + mcbsp->clks = NULL; + mcbsp->num_clks = 0; + } mcbsp->free = 0; mcbsp->dev = NULL; } -- cgit v1.2.2 From 320ce6f6fb3d95e02a183709e51d8a16a8b00e0a Mon Sep 17 00:00:00 2001 From: Juha Yrjola Date: Thu, 29 Jan 2009 08:57:12 -0800 Subject: ARM: OMAP: Fix race in OMAP2/3 DMA IRQ handling CSR must be cleared before invoking the callback. If the callback function starts a new, fast DMA transfer on the same channel, the completion status might lost if CSR is cleared after the callback invocation. Signed-off-by: Juha Yrjola Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dma.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index e77373c39f8c..bec8e363d545 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -1888,11 +1888,11 @@ static int omap2_dma_handle_ch(int ch) status = dma_read(CSR(ch)); } + dma_write(status, CSR(ch)); + if (likely(dma_chan[ch].callback != NULL)) dma_chan[ch].callback(ch, status, dma_chan[ch].data); - dma_write(status, CSR(ch)); - return 0; } -- cgit v1.2.2 From a92fda194d31d26c1fecd191a03d2dbc5b6ac230 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Thu, 29 Jan 2009 08:57:12 -0800 Subject: ARM: OMAP: DMA: Fix uninitialized channel flags This has similar symptoms than 66c23551b1b774e2be3c7bdf91c0ebf2c7a3519e where just omap_request_dma, omap_dma_link_lch and omap_dma_unlink_lch can cause incorrect dump_stack(). Here it can happen if channel has been used before and the channel flags variable holds old status. Signed-off-by: Jarkko Nikula Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dma.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index bec8e363d545..47ec77af4ccb 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -709,6 +709,7 @@ int omap_request_dma(int dev_id, const char *dev_name, chan->dev_name = dev_name; chan->callback = callback; chan->data = data; + chan->flags = 0; #ifndef CONFIG_ARCH_OMAP1 if (cpu_class_is_omap2()) { -- cgit v1.2.2 From 187e688d237a6df11a2d32e8ac480b6d1fbd40b9 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 29 Jan 2009 08:57:16 -0800 Subject: ARM: OMAP: Fix omap34xx revision detection for ES3.1 Fix omap34xx revision detection for ES3.1 Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/id.c | 6 +++++- arch/arm/plat-omap/include/mach/cpu.h | 1 + 2 files changed, 6 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index b0f8e7d62798..b52a02fc7cd6 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -172,9 +172,13 @@ void __init omap34xx_check_revision(void) omap_revision = OMAP3430_REV_ES3_0; rev_name = "ES3.0"; break; + case 4: + omap_revision = OMAP3430_REV_ES3_1; + rev_name = "ES3.1"; + break; default: /* Use the latest known revision as default */ - omap_revision = OMAP3430_REV_ES3_0; + omap_revision = OMAP3430_REV_ES3_1; rev_name = "Unknown revision\n"; } } diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h index b2062f1175de..a8e1178a9468 100644 --- a/arch/arm/plat-omap/include/mach/cpu.h +++ b/arch/arm/plat-omap/include/mach/cpu.h @@ -339,6 +339,7 @@ IS_OMAP_TYPE(3430, 0x3430) #define OMAP3430_REV_ES2_0 0x34301034 #define OMAP3430_REV_ES2_1 0x34302034 #define OMAP3430_REV_ES3_0 0x34303034 +#define OMAP3430_REV_ES3_1 0x34304034 /* * omap_chip bits -- cgit v1.2.2 From 0dffb5c57a1d76532e2f2c7398579bfce81c3e5c Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 29 Jan 2009 08:57:16 -0800 Subject: ARM: OMAP: Fix hsmmc init, v2 The naming accidentally broke while changing the name for the driver to not to conflict with the other mmc driver. Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/devices.c | 2 +- arch/arm/mach-omap2/devices.c | 11 +++++++---- arch/arm/plat-omap/devices.c | 7 ++++--- arch/arm/plat-omap/include/mach/mmc.h | 10 ++++++---- 4 files changed, 18 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 77382d8b6b2f..ba5d7c08dc17 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -181,7 +181,7 @@ void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, } size = OMAP1_MMC_SIZE; - omap_mmc_add(i, base, size, irq, mmc_data[i]); + omap_mmc_add("mmci-omap", i, base, size, irq, mmc_data[i]); }; } diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 9d7216ff6c9f..ce03fa750775 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -421,6 +421,7 @@ void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data, int nr_controllers) { int i; + char *name; for (i = 0; i < nr_controllers; i++) { unsigned long base, size; @@ -450,12 +451,14 @@ void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data, continue; } - if (cpu_is_omap2420()) + if (cpu_is_omap2420()) { size = OMAP2420_MMC_SIZE; - else + name = "mmci-omap"; + } else { size = HSMMC_SIZE; - - omap_mmc_add(i, base, size, irq, mmc_data[i]); + name = "mmci-omap-hs"; + } + omap_mmc_add(name, i, base, size, irq, mmc_data[i]); }; } diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index ac15c23fd5da..208dbb121f47 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -200,14 +200,15 @@ void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config, /* * Register MMC devices. Called from mach-omap1 and mach-omap2 device init. */ -int __init omap_mmc_add(int id, unsigned long base, unsigned long size, - unsigned int irq, struct omap_mmc_platform_data *data) +int __init omap_mmc_add(const char *name, int id, unsigned long base, + unsigned long size, unsigned int irq, + struct omap_mmc_platform_data *data) { struct platform_device *pdev; struct resource res[OMAP_MMC_NR_RES]; int ret; - pdev = platform_device_alloc("mmci-omap", id); + pdev = platform_device_alloc(name, id); if (!pdev) return -ENOMEM; diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/mach/mmc.h index 031250f02805..73a9e15031b1 100644 --- a/arch/arm/plat-omap/include/mach/mmc.h +++ b/arch/arm/plat-omap/include/mach/mmc.h @@ -115,8 +115,9 @@ void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, int nr_controllers); void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data, int nr_controllers); -int omap_mmc_add(int id, unsigned long base, unsigned long size, - unsigned int irq, struct omap_mmc_platform_data *data); +int omap_mmc_add(const char *name, int id, unsigned long base, + unsigned long size, unsigned int irq, + struct omap_mmc_platform_data *data); #else static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, int nr_controllers) @@ -126,8 +127,9 @@ static inline void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data, int nr_controllers) { } -static inline int omap_mmc_add(int id, unsigned long base, unsigned long size, - unsigned int irq, struct omap_mmc_platform_data *data) +static inline int omap_mmc_add(const char *name, int id, unsigned long base, + unsigned long size, unsigned int irq, + struct omap_mmc_platform_data *data) { return 0; } -- cgit v1.2.2 From df88acbbdc48d0bfe2a46bf2561d984b6d87a9ac Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Thu, 29 Jan 2009 08:57:17 -0800 Subject: ARM: OMAP: gptimer min_delta_ns corrected When 32 kHz timer is used the min_delta_ns should be initialized so that it reflects the timer programming cost. A write to the timer device will be usually posted, but it takes roughly 3 cycles before it is effective. If the timer is reprogrammed before that, the CPU will stall until the previous write completes. This was pointed out by Richard Woodruff. Since the lower bound for min_delta_ns is 1000, the change is visible only with tick rates less than 3 MHz. Also note that the old value is incorrect for 32 kHz also due to a rounding error, and it can cause the timer queue to hang (due to clockevent code trying to program the timer with zero ticks). Signed-off-by: Aaro Koskinen Reviewed-by: Richard Woodruff Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/timer-gp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c index ae6036300f60..9fc13a2cc3f4 100644 --- a/arch/arm/mach-omap2/timer-gp.c +++ b/arch/arm/mach-omap2/timer-gp.c @@ -118,7 +118,8 @@ static void __init omap2_gp_clockevent_init(void) clockevent_gpt.max_delta_ns = clockevent_delta2ns(0xffffffff, &clockevent_gpt); clockevent_gpt.min_delta_ns = - clockevent_delta2ns(1, &clockevent_gpt); + clockevent_delta2ns(3, &clockevent_gpt); + /* Timer internal resynch latency. */ clockevent_gpt.cpumask = cpumask_of(0); clockevents_register_device(&clockevent_gpt); -- cgit v1.2.2 From 5461af5af5c6a7fee78978aafe720541bf3a2f55 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=EA=B9=80=EA=B7=9C=EC=9B=90?= Date: Thu, 29 Jan 2009 08:57:17 -0800 Subject: ARM: OMAP: Mask interrupts when disabling interrupts, v2 By Ingo Molnar, interrupts are not masked by default. (refer to 76d2160147f43f982dfe881404cfde9fd0a9da21) But if interrupts are not masked, the processor can wake up while in Suspend-to-RAM state by an external interrupt. For example, if an OMAP3 board is connected to Host PC by USB and entered to Suspend-to-RAM state, it wake up automatically by M_IRQ_92. The disable_irq() function can't disable the interrupt in H/W level, So I modified arch/arm/mach-omap2/irq.c Signed-off-by: Kim Kyuwon Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/irq.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 636e2821af7d..9ba20d985dda 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -134,6 +134,7 @@ static struct irq_chip omap_irq_chip = { .ack = omap_mask_ack_irq, .mask = omap_mask_irq, .unmask = omap_unmask_irq, + .disable = omap_mask_irq, }; static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank) -- cgit v1.2.2 From 0dc23d704874e892c3fb5f2c0e4dfbef3c9c6edf Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Thu, 29 Jan 2009 08:57:18 -0800 Subject: ARM: OMAP: fix fault in enter_full_retention() In omap24xx_cpu_suspend assembly routine, the r2 register which holds the address of the SDRC_POWER reg is set to zero before the value is written back triggering a fault due to writing to address zero. It's hard to tell where this change was introduced since this file has been moved and merged. While this fix prevents a crash, suspend on my n810 is broken with current kernels. I never come out of suspend. Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/sleep24xx.S | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S index 43336b93b21c..bf9e96105e11 100644 --- a/arch/arm/mach-omap2/sleep24xx.S +++ b/arch/arm/mach-omap2/sleep24xx.S @@ -93,9 +93,8 @@ ENTRY(omap24xx_cpu_suspend) orr r4, r4, #0x40 @ enable self refresh on idle req mov r5, #0x2000 @ set delay (DPLL relock + DLL relock) str r4, [r2] @ make it so - mov r2, #0 nop - mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt + mcr p15, 0, r3, c7, c0, 4 @ wait for interrupt nop loop: subs r5, r5, #0x1 @ awake, wait just a bit -- cgit v1.2.2 From e5553a6d04421eec326a629571d696e8e745a0e4 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 29 Jan 2009 21:22:47 -0800 Subject: sparc64: Implement NMI watchdog on capable cpus. Signed-off-by: David S. Miller --- arch/sparc/include/asm/cpudata_64.h | 2 +- arch/sparc/include/asm/irq_64.h | 4 +- arch/sparc/include/asm/kdebug_64.h | 2 + arch/sparc/include/asm/nmi.h | 10 ++ arch/sparc/include/asm/pcr.h | 16 +++ arch/sparc/kernel/Makefile | 1 + arch/sparc/kernel/irq_64.c | 68 +---------- arch/sparc/kernel/nmi.c | 224 ++++++++++++++++++++++++++++++++++++ arch/sparc/kernel/pcr.c | 17 ++- arch/sparc/oprofile/init.c | 128 ++++++--------------- 10 files changed, 309 insertions(+), 163 deletions(-) create mode 100644 arch/sparc/include/asm/nmi.h create mode 100644 arch/sparc/kernel/nmi.c (limited to 'arch') diff --git a/arch/sparc/include/asm/cpudata_64.h b/arch/sparc/include/asm/cpudata_64.h index 7da7c13d23c4..a11b89ee9ef8 100644 --- a/arch/sparc/include/asm/cpudata_64.h +++ b/arch/sparc/include/asm/cpudata_64.h @@ -17,7 +17,7 @@ typedef struct { /* Dcache line 1 */ unsigned int __softirq_pending; /* must be 1st, see rtrap.S */ - unsigned int __pad0; + unsigned int __nmi_count; unsigned long clock_tick; /* %tick's per second */ unsigned long __pad; unsigned int __pad1; diff --git a/arch/sparc/include/asm/irq_64.h b/arch/sparc/include/asm/irq_64.h index d47d4a1955a9..1934f2cbf513 100644 --- a/arch/sparc/include/asm/irq_64.h +++ b/arch/sparc/include/asm/irq_64.h @@ -66,9 +66,6 @@ extern void virt_irq_free(unsigned int virt_irq); extern void __init init_IRQ(void); extern void fixup_irqs(void); -extern int register_perfctr_intr(void (*handler)(struct pt_regs *)); -extern void release_perfctr_intr(void (*handler)(struct pt_regs *)); - static inline void set_softint(unsigned long bits) { __asm__ __volatile__("wr %0, 0x0, %%set_softint" @@ -98,5 +95,6 @@ void __trigger_all_cpu_backtrace(void); extern void *hardirq_stack[NR_CPUS]; extern void *softirq_stack[NR_CPUS]; #define __ARCH_HAS_DO_SOFTIRQ +#define ARCH_HAS_NMI_WATCHDOG #endif diff --git a/arch/sparc/include/asm/kdebug_64.h b/arch/sparc/include/asm/kdebug_64.h index f905b773235a..feb3578e12c4 100644 --- a/arch/sparc/include/asm/kdebug_64.h +++ b/arch/sparc/include/asm/kdebug_64.h @@ -14,6 +14,8 @@ enum die_val { DIE_TRAP, DIE_TRAP_TL1, DIE_CALL, + DIE_NMI, + DIE_NMIWATCHDOG, }; #endif diff --git a/arch/sparc/include/asm/nmi.h b/arch/sparc/include/asm/nmi.h new file mode 100644 index 000000000000..fbd546dd4feb --- /dev/null +++ b/arch/sparc/include/asm/nmi.h @@ -0,0 +1,10 @@ +#ifndef __NMI_H +#define __NMI_H + +extern int __init nmi_init(void); +extern void perfctr_irq(int irq, struct pt_regs *regs); +extern void nmi_adjust_hz(unsigned int new_hz); + +extern int nmi_usable; + +#endif /* __NMI_H */ diff --git a/arch/sparc/include/asm/pcr.h b/arch/sparc/include/asm/pcr.h index 4249bb523ef1..a2f5c61f924e 100644 --- a/arch/sparc/include/asm/pcr.h +++ b/arch/sparc/include/asm/pcr.h @@ -27,4 +27,20 @@ extern void schedule_deferred_pcr_work(void); #define PCR_N2_SL1_SHIFT 27 #define PCR_N2_OV1 0x80000000 +extern unsigned int picl_shift; + +/* In order to commonize as much of the implementation as + * possible, we use PICH as our counter. Mostly this is + * to accomodate Niagara-1 which can only count insn cycles + * in PICH. + */ +static inline u64 picl_value(unsigned int nmi_hz) +{ + u32 delta = local_cpu_data().clock_tick / (nmi_hz << picl_shift); + + return ((u64)((0 - delta) & 0xffffffff)) << 32; +} + +extern u64 pcr_enable; + #endif /* __PCR_H */ diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile index cb182d9c2f2b..54742e58831c 100644 --- a/arch/sparc/kernel/Makefile +++ b/arch/sparc/kernel/Makefile @@ -53,6 +53,7 @@ obj-$(CONFIG_SPARC64) += hvapi.o obj-$(CONFIG_SPARC64) += sstate.o obj-$(CONFIG_SPARC64) += mdesc.o obj-$(CONFIG_SPARC64) += pcr.o +obj-$(CONFIG_SPARC64) += nmi.o # sparc32 do not use GENERIC_HARDIRQS but uses the generic devres implementation obj-$(CONFIG_SPARC32) += devres.o diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c index cab8e0286871..e289376198eb 100644 --- a/arch/sparc/kernel/irq_64.c +++ b/arch/sparc/kernel/irq_64.c @@ -196,6 +196,11 @@ int show_interrupts(struct seq_file *p, void *v) seq_putc(p, '\n'); skip: spin_unlock_irqrestore(&irq_desc[i].lock, flags); + } else if (i == NR_IRQS) { + seq_printf(p, "NMI: "); + for_each_online_cpu(j) + seq_printf(p, "%10u ", cpu_data(j).__nmi_count); + seq_printf(p, " Non-maskable interrupts\n"); } return 0; } @@ -778,69 +783,6 @@ void do_softirq(void) local_irq_restore(flags); } -static void unhandled_perf_irq(struct pt_regs *regs) -{ - unsigned long pcr, pic; - - read_pcr(pcr); - read_pic(pic); - - write_pcr(0); - - printk(KERN_EMERG "CPU %d: Got unexpected perf counter IRQ.\n", - smp_processor_id()); - printk(KERN_EMERG "CPU %d: PCR[%016lx] PIC[%016lx]\n", - smp_processor_id(), pcr, pic); -} - -/* Almost a direct copy of the powerpc PMC code. */ -static DEFINE_SPINLOCK(perf_irq_lock); -static void *perf_irq_owner_caller; /* mostly for debugging */ -static void (*perf_irq)(struct pt_regs *regs) = unhandled_perf_irq; - -/* Invoked from level 15 PIL handler in trap table. */ -void perfctr_irq(int irq, struct pt_regs *regs) -{ - clear_softint(1 << irq); - perf_irq(regs); -} - -int register_perfctr_intr(void (*handler)(struct pt_regs *)) -{ - int ret; - - if (!handler) - return -EINVAL; - - spin_lock(&perf_irq_lock); - if (perf_irq != unhandled_perf_irq) { - printk(KERN_WARNING "register_perfctr_intr: " - "perf IRQ busy (reserved by caller %p)\n", - perf_irq_owner_caller); - ret = -EBUSY; - goto out; - } - - perf_irq_owner_caller = __builtin_return_address(0); - perf_irq = handler; - - ret = 0; -out: - spin_unlock(&perf_irq_lock); - - return ret; -} -EXPORT_SYMBOL_GPL(register_perfctr_intr); - -void release_perfctr_intr(void (*handler)(struct pt_regs *)) -{ - spin_lock(&perf_irq_lock); - perf_irq_owner_caller = NULL; - perf_irq = unhandled_perf_irq; - spin_unlock(&perf_irq_lock); -} -EXPORT_SYMBOL_GPL(release_perfctr_intr); - #ifdef CONFIG_HOTPLUG_CPU void fixup_irqs(void) { diff --git a/arch/sparc/kernel/nmi.c b/arch/sparc/kernel/nmi.c new file mode 100644 index 000000000000..ffc690093343 --- /dev/null +++ b/arch/sparc/kernel/nmi.c @@ -0,0 +1,224 @@ +/* Pseudo NMI support on sparc64 systems. + * + * Copyright (C) 2009 David S. Miller + * + * The NMI watchdog support and infrastructure is based almost + * entirely upon the x86 NMI support code. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +/* We don't have a real NMI on sparc64, but we can fake one + * up using profiling counter overflow interrupts and interrupt + * levels. + * + * The profile overflow interrupts at level 15, so we use + * level 14 as our IRQ off level. + */ + +static int nmi_watchdog_active; +static int panic_on_timeout; + +int nmi_usable; +EXPORT_SYMBOL_GPL(nmi_usable); + +static unsigned int nmi_hz = HZ; + +static DEFINE_PER_CPU(unsigned int, last_irq_sum); +static DEFINE_PER_CPU(local_t, alert_counter); +static DEFINE_PER_CPU(int, nmi_touch); + +void touch_nmi_watchdog(void) +{ + if (nmi_watchdog_active) { + int cpu; + + for_each_present_cpu(cpu) { + if (per_cpu(nmi_touch, cpu) != 1) + per_cpu(nmi_touch, cpu) = 1; + } + } + + touch_softlockup_watchdog(); +} +EXPORT_SYMBOL(touch_nmi_watchdog); + +static void die_nmi(const char *str, struct pt_regs *regs, int do_panic) +{ + if (notify_die(DIE_NMIWATCHDOG, str, regs, 0, + pt_regs_trap_type(regs), SIGINT) == NOTIFY_STOP) + return; + + console_verbose(); + bust_spinlocks(1); + + printk(KERN_EMERG "%s", str); + printk(" on CPU%d, ip %08lx, registers:\n", + smp_processor_id(), regs->tpc); + show_regs(regs); + + bust_spinlocks(0); + + if (do_panic || panic_on_oops) + panic("Non maskable interrupt"); + + local_irq_enable(); + do_exit(SIGBUS); +} + +notrace __kprobes void perfctr_irq(int irq, struct pt_regs *regs) +{ + unsigned int sum, touched = 0; + int cpu = smp_processor_id(); + + clear_softint(1 << irq); + pcr_ops->write(PCR_PIC_PRIV); + + local_cpu_data().__nmi_count++; + + if (notify_die(DIE_NMI, "nmi", regs, 0, + pt_regs_trap_type(regs), SIGINT) == NOTIFY_STOP) + touched = 1; + + sum = kstat_cpu(cpu).irqs[0]; + if (__get_cpu_var(nmi_touch)) { + __get_cpu_var(nmi_touch) = 0; + touched = 1; + } + if (!touched && __get_cpu_var(last_irq_sum) == sum) { + local_inc(&__get_cpu_var(alert_counter)); + if (local_read(&__get_cpu_var(alert_counter)) == 5 * nmi_hz) + die_nmi("BUG: NMI Watchdog detected LOCKUP", + regs, panic_on_timeout); + } else { + __get_cpu_var(last_irq_sum) = sum; + local_set(&__get_cpu_var(alert_counter), 0); + } + if (nmi_usable) { + write_pic(picl_value(nmi_hz)); + pcr_ops->write(pcr_enable); + } +} + +static inline unsigned int get_nmi_count(int cpu) +{ + return cpu_data(cpu).__nmi_count; +} + +static int endflag __initdata; + +static __init void nmi_cpu_busy(void *data) +{ + local_irq_enable_in_hardirq(); + while (endflag == 0) + mb(); +} + +static void report_broken_nmi(int cpu, int *prev_nmi_count) +{ + printk(KERN_CONT "\n"); + + printk(KERN_WARNING + "WARNING: CPU#%d: NMI appears to be stuck (%d->%d)!\n", + cpu, prev_nmi_count[cpu], get_nmi_count(cpu)); + + printk(KERN_WARNING + "Please report this to bugzilla.kernel.org,\n"); + printk(KERN_WARNING + "and attach the output of the 'dmesg' command.\n"); + + nmi_usable = 0; +} + +static void stop_watchdog(void *unused) +{ + pcr_ops->write(PCR_PIC_PRIV); +} + +static int __init check_nmi_watchdog(void) +{ + unsigned int *prev_nmi_count; + int cpu, err; + + prev_nmi_count = kmalloc(nr_cpu_ids * sizeof(unsigned int), GFP_KERNEL); + if (!prev_nmi_count) { + err = -ENOMEM; + goto error; + } + + printk(KERN_INFO "Testing NMI watchdog ... "); + + smp_call_function(nmi_cpu_busy, (void *)&endflag, 0); + + for_each_possible_cpu(cpu) + prev_nmi_count[cpu] = get_nmi_count(cpu); + local_irq_enable(); + mdelay((20 * 1000) / nmi_hz); /* wait 20 ticks */ + + for_each_online_cpu(cpu) { + if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5) + report_broken_nmi(cpu, prev_nmi_count); + } + endflag = 1; + if (!nmi_usable) { + kfree(prev_nmi_count); + err = -ENODEV; + goto error; + } + printk("OK.\n"); + + nmi_hz = 1; + + kfree(prev_nmi_count); + return 0; +error: + on_each_cpu(stop_watchdog, NULL, 1); + return err; +} + +static void start_watchdog(void *unused) +{ + pcr_ops->write(PCR_PIC_PRIV); + write_pic(picl_value(nmi_hz)); + + pcr_ops->write(pcr_enable); +} + +void nmi_adjust_hz(unsigned int new_hz) +{ + nmi_hz = new_hz; + on_each_cpu(start_watchdog, NULL, 1); +} +EXPORT_SYMBOL_GPL(nmi_adjust_hz); + +int __init nmi_init(void) +{ + nmi_usable = 1; + + on_each_cpu(start_watchdog, NULL, 1); + + return check_nmi_watchdog(); +} + +static int __init setup_nmi_watchdog(char *str) +{ + if (!strncmp(str, "panic", 5)) + panic_on_timeout = 1; + + return 0; +} +__setup("nmi_watchdog=", setup_nmi_watchdog); diff --git a/arch/sparc/kernel/pcr.c b/arch/sparc/kernel/pcr.c index c4f24703b165..92e0dda141a4 100644 --- a/arch/sparc/kernel/pcr.c +++ b/arch/sparc/kernel/pcr.c @@ -9,12 +9,22 @@ #include #include +#include /* This code is shared between various users of the performance * counters. Users will be oprofile, pseudo-NMI watchdog, and the * perf_counter support layer. */ +#define PCR_SUN4U_ENABLE (PCR_PIC_PRIV | PCR_STRACE | PCR_UTRACE) +#define PCR_N2_ENABLE (PCR_PIC_PRIV | PCR_STRACE | PCR_UTRACE | \ + PCR_N2_TOE_OV1 | \ + (2 << PCR_N2_SL1_SHIFT) | \ + (0xff << PCR_N2_MASK1_SHIFT)) + +u64 pcr_enable; +unsigned int picl_shift; + /* Performance counter interrupts run unmasked at PIL level 15. * Therefore we can't do things like wakeups and other work * that expects IRQ disabling to be adhered to in locking etc. @@ -117,12 +127,15 @@ int __init pcr_arch_init(void) switch (tlb_type) { case hypervisor: pcr_ops = &n2_pcr_ops; + pcr_enable = PCR_N2_ENABLE; + picl_shift = 2; break; - case spitfire: case cheetah: case cheetah_plus: + case spitfire: pcr_ops = &direct_pcr_ops; + pcr_enable = PCR_SUN4U_ENABLE; break; default: @@ -130,7 +143,7 @@ int __init pcr_arch_init(void) goto out_unregister; } - return 0; + return nmi_init(); out_unregister: unregister_perf_hsvc(); diff --git a/arch/sparc/oprofile/init.c b/arch/sparc/oprofile/init.c index c8877a5202b0..d172f86439b1 100644 --- a/arch/sparc/oprofile/init.c +++ b/arch/sparc/oprofile/init.c @@ -13,117 +13,57 @@ #include #ifdef CONFIG_SPARC64 -#include -#include -#include -#include -#include +#include +#include +#include +#include -static int nmi_enabled; - -/* In order to commonize as much of the implementation as - * possible, we use PICH as our counter. Mostly this is - * to accomodate Niagara-1 which can only count insn cycles - * in PICH. - */ -static u64 picl_value(void) -{ - u32 delta = local_cpu_data().clock_tick / HZ; - - return ((u64)((0 - delta) & 0xffffffff)) << 32; -} - -#define PCR_SUN4U_ENABLE (PCR_PIC_PRIV | PCR_STRACE | PCR_UTRACE) -#define PCR_N2_ENABLE (PCR_PIC_PRIV | PCR_STRACE | PCR_UTRACE | \ - PCR_N2_TOE_OV1 | \ - (2 << PCR_N2_SL1_SHIFT) | \ - (0xff << PCR_N2_MASK1_SHIFT)) - -static u64 pcr_enable; - -static void nmi_handler(struct pt_regs *regs) +static int profile_timer_exceptions_notify(struct notifier_block *self, + unsigned long val, void *data) { - pcr_ops->write(PCR_PIC_PRIV); + struct die_args *args = (struct die_args *)data; + int ret = NOTIFY_DONE; - if (nmi_enabled) { - oprofile_add_sample(regs, 0); - - write_pic(picl_value()); - pcr_ops->write(pcr_enable); + switch (val) { + case DIE_NMI: + oprofile_add_sample(args->regs, 0); + ret = NOTIFY_STOP; + break; + default: + break; } + return ret; } -/* We count "clock cycle" events in the lower 32-bit PIC. - * Then configure it such that it overflows every HZ, and thus - * generates a level 15 interrupt at that frequency. - */ -static void cpu_nmi_start(void *_unused) -{ - pcr_ops->write(PCR_PIC_PRIV); - write_pic(picl_value()); - - pcr_ops->write(pcr_enable); -} +static struct notifier_block profile_timer_exceptions_nb = { + .notifier_call = profile_timer_exceptions_notify, +}; -static void cpu_nmi_stop(void *_unused) +static int timer_start(void) { - pcr_ops->write(PCR_PIC_PRIV); + if (register_die_notifier(&profile_timer_exceptions_nb)) + return 1; + nmi_adjust_hz(HZ); + return 0; } -static int nmi_start(void) -{ - int err = register_perfctr_intr(nmi_handler); - - if (!err) { - nmi_enabled = 1; - wmb(); - err = on_each_cpu(cpu_nmi_start, NULL, 1); - if (err) { - nmi_enabled = 0; - wmb(); - on_each_cpu(cpu_nmi_stop, NULL, 1); - release_perfctr_intr(nmi_handler); - } - } - - return err; -} -static void nmi_stop(void) +static void timer_stop(void) { - nmi_enabled = 0; - wmb(); - - on_each_cpu(cpu_nmi_stop, NULL, 1); - release_perfctr_intr(nmi_handler); - synchronize_sched(); + nmi_adjust_hz(1); + unregister_die_notifier(&profile_timer_exceptions_nb); + synchronize_sched(); /* Allow already-started NMIs to complete. */ } -static int oprofile_nmi_init(struct oprofile_operations *ops) +static int op_nmi_timer_init(struct oprofile_operations *ops) { - switch (tlb_type) { - case hypervisor: - pcr_enable = PCR_N2_ENABLE; - break; - - case cheetah: - case cheetah_plus: - pcr_enable = PCR_SUN4U_ENABLE; - break; - - default: + if (!nmi_usable) return -ENODEV; - } - ops->create_files = NULL; - ops->setup = NULL; - ops->shutdown = NULL; - ops->start = nmi_start; - ops->stop = nmi_stop; + ops->start = timer_start; + ops->stop = timer_stop; ops->cpu_type = "timer"; - - printk(KERN_INFO "oprofile: Using perfctr based NMI timer interrupt.\n"); - + printk(KERN_INFO "oprofile: Using perfctr NMI timer interrupt.\n"); return 0; } #endif @@ -133,7 +73,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) int ret = -ENODEV; #ifdef CONFIG_SPARC64 - ret = oprofile_nmi_init(ops); + ret = op_nmi_timer_init(ops); if (!ret) return ret; #endif -- cgit v1.2.2 From 6fd7ad96d6c51ba15479cb74dcb189b666422394 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Sat, 31 Jan 2009 01:21:55 +0100 Subject: Use __SPIN_LOCK_UNLOCKED to initialize bad_irq_desc.lock MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit SPIN_LOCK_UNLOCKED is deprecated as lockdep cannot properly work with locks initialized with it. This fix is necessary to compile the linux-rt tree for ARM. Signed-off-by: Uwe Kleine-König Cc: Steven Rostedt --- arch/arm/kernel/irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 7141cee1fab7..363db186cb93 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -101,7 +101,7 @@ unlock: /* Handle bad interrupts */ static struct irq_desc bad_irq_desc = { .handle_irq = handle_bad_irq, - .lock = SPIN_LOCK_UNLOCKED + .lock = __SPIN_LOCK_UNLOCKED(bad_irq_desc.lock), }; /* -- cgit v1.2.2 From b3c960b277c440c8a7788d338c9f494ad62e46ab Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Sat, 31 Jan 2009 01:21:56 +0100 Subject: annotate that [fp, #-4] is the saved lr MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Uwe Kleine-König --- arch/arm/kernel/entry-common.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 06269ea375c5..49a6ba926c2b 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -136,7 +136,7 @@ ENTRY(mcount) ldmia sp!, {r0-r3, pc} trace: - ldr r1, [fp, #-4] + ldr r1, [fp, #-4] @ lr of instrumented routine mov r0, lr sub r0, r0, #MCOUNT_INSN_SIZE mov lr, pc -- cgit v1.2.2 From bcc8f3e01facc51b9d4f6351cd866f19eac0b5ae Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Sat, 31 Jan 2009 01:21:58 +0100 Subject: rename platform_driver name "flash" to "sa1100-mtd" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit "flash" is a very generic name for a platform_driver that is only available on SA11x0. Signed-off-by: Uwe Kleine-König Cc: Nicolas Pitre --- arch/arm/mach-sa1100/generic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index c1fbd5b5f9c4..23cfdd593954 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -289,7 +289,7 @@ static struct platform_device sa11x0pcmcia_device = { }; static struct platform_device sa11x0mtd_device = { - .name = "flash", + .name = "sa1100-mtd", .id = -1, }; -- cgit v1.2.2 From 802c64b310e5b9dfda6cb50b850b962ed96a9e81 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 2 Feb 2009 21:57:48 -0800 Subject: sparc64: On non-Niagara, need to touch NMI watchdog in NOHZ mode. When we're idling in NOHZ mode, timer interrupts are not running. Evidence of processing timer interrupts is what the NMI watchdog uses to determine if the CPU is stuck. On Niagara, we'll yield the cpu. This will make the cpu, at worst, hang out in the hypervisor until an interrupt arrives. This will prevent the NMI watchdog timer from firing. However on non-Niagara we just loop executing instructions which will cause the NMI watchdog to keep firing. It won't see timer interrupts happening so it will think the cpu is stuck. Fix this by touching the NMI watchdog in the cpu idle loop on non-Niagara machines. Signed-off-by: David S. Miller --- arch/sparc/kernel/process_64.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc/kernel/process_64.c b/arch/sparc/kernel/process_64.c index cc8b5604442c..a73954b87f0a 100644 --- a/arch/sparc/kernel/process_64.c +++ b/arch/sparc/kernel/process_64.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include @@ -52,8 +53,10 @@ static void sparc64_yield(int cpu) { - if (tlb_type != hypervisor) + if (tlb_type != hypervisor) { + touch_nmi_watchdog(); return; + } clear_thread_flag(TIF_POLLING_NRFLAG); smp_mb__after_clear_bit(); -- cgit v1.2.2 From eeabac7386ca13bfe1a58afeb04326a9e1a3a20e Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 2 Feb 2009 22:08:15 -0800 Subject: sparc64: Validate kernel generated fault addresses on sparc64. In order to handle all of the cases of address calculation overflow properly, we run sparc 32-bit processes in "address masking" mode when running on a 64-bit kernel. Address masking mode zeros out the top 32-bits of the address calculated for every load and store instruction. However, when we're in privileged mode we have to run with that address masking mode disabled even when accessing userspace from the kernel. To "simulate" the address masking mode we clear the top-bits by hand for 32-bit processes in the fault handler. It is the responsibility of code in the compat layer to properly zero extend addresses used to access userspace. If this isn't followed properly we can get into a fault loop. Say that the user address is 0xf0000000 but for whatever reason the kernel code sign extends this to 64-bit, and then the kernel tries to access the result. In such a case we'll fault on address 0xfffffffff0000000 but the fault handler will process that fault as if it were to address 0xf0000000. We'll loop faulting forever because the fault never gets satisfied. So add a check specifically for this case, when the kernel is faulting on a user address access and the addresses don't match up. This code path is sufficiently slow path, and this bug is sufficiently painful to diagnose, that this kind of bug check is warranted. Signed-off-by: David S. Miller --- arch/sparc/mm/fault_64.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/sparc/mm/fault_64.c b/arch/sparc/mm/fault_64.c index a9e474bf6385..1a786abdada3 100644 --- a/arch/sparc/mm/fault_64.c +++ b/arch/sparc/mm/fault_64.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -244,8 +245,14 @@ asmlinkage void __kprobes do_sparc64_fault(struct pt_regs *regs) (fault_code & FAULT_CODE_DTLB)) BUG(); + if (test_thread_flag(TIF_32BIT)) { + if (!(regs->tstate & TSTATE_PRIV)) + regs->tpc &= 0xffffffff; + address &= 0xffffffff; + } + if (regs->tstate & TSTATE_PRIV) { - unsigned long tpc = regs->tpc; + unsigned long eaddr, tpc = regs->tpc; /* Sanity check the PC. */ if ((tpc >= KERNBASE && tpc < (unsigned long) __init_end) || @@ -255,6 +262,16 @@ asmlinkage void __kprobes do_sparc64_fault(struct pt_regs *regs) bad_kernel_pc(regs, address); return; } + + insn = get_fault_insn(regs, insn); + eaddr = compute_effective_address(regs, insn, 0); + if (WARN_ON_ONCE((eaddr & PAGE_MASK) != (address & PAGE_MASK))){ + printk(KERN_ERR "FAULT: Mismatch kernel fault " + "address: addr[%lx] eaddr[%lx] TPC[%lx]\n", + address, eaddr, tpc); + show_regs(regs); + goto handle_kernel_fault; + } } /* @@ -264,12 +281,6 @@ asmlinkage void __kprobes do_sparc64_fault(struct pt_regs *regs) if (in_atomic() || !mm) goto intr_or_no_mm; - if (test_thread_flag(TIF_32BIT)) { - if (!(regs->tstate & TSTATE_PRIV)) - regs->tpc &= 0xffffffff; - address &= 0xffffffff; - } - if (!down_read_trylock(&mm->mmap_sem)) { if ((regs->tstate & TSTATE_PRIV) && !search_exception_tables(regs->tpc)) { -- cgit v1.2.2 From 47a4a0e766e3152dee667ea8fcca8465c8a0759f Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Mon, 2 Feb 2009 22:14:28 -0800 Subject: sparc: fixup for sparseirq changes Signed-off-by: Stephen Rothwell Signed-off-by: David S. Miller --- arch/sparc/kernel/nmi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc/kernel/nmi.c b/arch/sparc/kernel/nmi.c index ffc690093343..09f088ed4a64 100644 --- a/arch/sparc/kernel/nmi.c +++ b/arch/sparc/kernel/nmi.c @@ -94,7 +94,7 @@ notrace __kprobes void perfctr_irq(int irq, struct pt_regs *regs) pt_regs_trap_type(regs), SIGINT) == NOTIFY_STOP) touched = 1; - sum = kstat_cpu(cpu).irqs[0]; + sum = kstat_irqs_cpu(0, cpu); if (__get_cpu_var(nmi_touch)) { __get_cpu_var(nmi_touch) = 0; touched = 1; -- cgit v1.2.2 From 9b02605826903203d5301049c1f52e722584785c Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 3 Feb 2009 16:28:23 -0800 Subject: sparc64: Kill bogus TPC/address truncation during 32-bit faults. This builds upon eeabac7386ca13bfe1a58afeb04326a9e1a3a20e ("sparc64: Validate kernel generated fault addresses on sparc64.") Upon further consideration, we actually should never see any fault addresses for 32-bit tasks with the upper 32-bits set. If it does every happen, by definition it's a bug. Whatever context created that fault would only have that fault satisfied if we used the full 64-bit address. If we truncate it, we'll always fault the wrong address and we'll always loop faulting forever. So catch such conditions and mark them as errors always. Log the error and fail the fault. Signed-off-by: David S. Miller --- arch/sparc/mm/fault_64.c | 49 ++++++++++++++++++++++++++++++++++-------------- 1 file changed, 35 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/sparc/mm/fault_64.c b/arch/sparc/mm/fault_64.c index 1a786abdada3..4ab8993b0863 100644 --- a/arch/sparc/mm/fault_64.c +++ b/arch/sparc/mm/fault_64.c @@ -225,6 +225,30 @@ cannot_handle: unhandled_fault (address, current, regs); } +static void noinline bogus_32bit_fault_tpc(struct pt_regs *regs) +{ + static int times; + + if (times++ < 10) + printk(KERN_ERR "FAULT[%s:%d]: 32-bit process reports " + "64-bit TPC [%lx]\n", + current->comm, current->pid, + regs->tpc); + show_regs(regs); +} + +static void noinline bogus_32bit_fault_address(struct pt_regs *regs, + unsigned long addr) +{ + static int times; + + if (times++ < 10) + printk(KERN_ERR "FAULT[%s:%d]: 32-bit process " + "reports 64-bit fault address [%lx]\n", + current->comm, current->pid, addr); + show_regs(regs); +} + asmlinkage void __kprobes do_sparc64_fault(struct pt_regs *regs) { struct mm_struct *mm = current->mm; @@ -246,13 +270,20 @@ asmlinkage void __kprobes do_sparc64_fault(struct pt_regs *regs) BUG(); if (test_thread_flag(TIF_32BIT)) { - if (!(regs->tstate & TSTATE_PRIV)) - regs->tpc &= 0xffffffff; - address &= 0xffffffff; + if (!(regs->tstate & TSTATE_PRIV)) { + if (unlikely((regs->tpc >> 32) != 0)) { + bogus_32bit_fault_tpc(regs); + goto intr_or_no_mm; + } + } + if (unlikely((address >> 32) != 0)) { + bogus_32bit_fault_address(regs, address); + goto intr_or_no_mm; + } } if (regs->tstate & TSTATE_PRIV) { - unsigned long eaddr, tpc = regs->tpc; + unsigned long tpc = regs->tpc; /* Sanity check the PC. */ if ((tpc >= KERNBASE && tpc < (unsigned long) __init_end) || @@ -262,16 +293,6 @@ asmlinkage void __kprobes do_sparc64_fault(struct pt_regs *regs) bad_kernel_pc(regs, address); return; } - - insn = get_fault_insn(regs, insn); - eaddr = compute_effective_address(regs, insn, 0); - if (WARN_ON_ONCE((eaddr & PAGE_MASK) != (address & PAGE_MASK))){ - printk(KERN_ERR "FAULT: Mismatch kernel fault " - "address: addr[%lx] eaddr[%lx] TPC[%lx]\n", - address, eaddr, tpc); - show_regs(regs); - goto handle_kernel_fault; - } } /* -- cgit v1.2.2 From d3522648676d4c8869e5539bca081820e69e24a4 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 4 Feb 2009 16:49:45 +0800 Subject: Blackfin arch: scrub comments/whitespace/cvs keywords Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/include/asm/kgdb.h | 53 ++++++++++++---------------------------- 1 file changed, 15 insertions(+), 38 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/include/asm/kgdb.h b/arch/blackfin/include/asm/kgdb.h index 26ebac6646d8..c8b256d2ea30 100644 --- a/arch/blackfin/include/asm/kgdb.h +++ b/arch/blackfin/include/asm/kgdb.h @@ -1,32 +1,8 @@ -/* - * File: include/asm-blackfin/kgdb.h - * Based on: - * Author: Sonic Zhang - * - * Created: - * Description: - * - * Rev: $Id: kgdb_bfin_linux-2.6.x.patch 4934 2007-02-13 09:32:11Z sonicz $ - * - * Modified: - * Copyright 2005-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ +/* Blackfin KGDB header * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * Copyright 2005-2009 Analog Devices Inc. * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #ifndef __ASM_BLACKFIN_KGDB_H__ @@ -37,17 +13,18 @@ /* gdb locks */ #define KGDB_MAX_NO_CPUS 8 -/************************************************************************/ -/* BUFMAX defines the maximum number of characters in inbound/outbound buffers*/ -/* at least NUMREGBYTES*2 are needed for register packets */ -/* Longer buffer is needed to list all threads */ +/* + * BUFMAX defines the maximum number of characters in inbound/outbound buffers. + * At least NUMREGBYTES*2 are needed for register packets. + * Longer buffer is needed to list all threads. + */ #define BUFMAX 2048 /* - * Note that this register image is different from - * the register image that Linux produces at interrupt time. - * - * Linux's register image is defined by struct pt_regs in ptrace.h. + * Note that this register image is different from + * the register image that Linux produces at interrupt time. + * + * Linux's register image is defined by struct pt_regs in ptrace.h. */ enum regnames { /* Core Registers */ @@ -104,14 +81,14 @@ enum regnames { BFIN_RETX, BFIN_RETN, BFIN_RETE, - + /* Pseudo Registers */ BFIN_PC, BFIN_CC, BFIN_EXTRA1, /* Address of .text section. */ BFIN_EXTRA2, /* Address of .data section. */ BFIN_EXTRA3, /* Address of .bss section. */ - BFIN_FDPIC_EXEC, + BFIN_FDPIC_EXEC, BFIN_FDPIC_INTERP, /* MMRs */ @@ -126,7 +103,7 @@ enum regnames { static inline void arch_kgdb_breakpoint(void) { - asm(" EXCPT 2;"); + asm("EXCPT 2;"); } #define BREAK_INSTR_SIZE 2 #define CACHE_FLUSH_IS_SAFE 1 -- cgit v1.2.2 From 2f89c0632f6e27cc3e5eb66605490ddf67ef4953 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 4 Feb 2009 16:49:45 +0800 Subject: Blackfin arch: add support for mobile ddr bf54x parts Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/Kconfig | 52 +++++++++++++++++++++------ arch/blackfin/Makefile | 10 ++++++ arch/blackfin/mach-bf548/include/mach/bf548.h | 12 +++++++ 3 files changed, 63 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index a949c4fbbddd..8f1f97d56e1e 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -169,26 +169,51 @@ config BF542 help BF542 Processor Support. +config BF542M + bool "BF542m" + help + BF542 Processor Support. + config BF544 bool "BF544" help BF544 Processor Support. +config BF544M + bool "BF544m" + help + BF544 Processor Support. + config BF547 bool "BF547" help BF547 Processor Support. +config BF547M + bool "BF547m" + help + BF547 Processor Support. + config BF548 bool "BF548" help BF548 Processor Support. +config BF548M + bool "BF548m" + help + BF548 Processor Support. + config BF549 bool "BF549" help BF549 Processor Support. +config BF549M + bool "BF549m" + help + BF549 Processor Support. + config BF561 bool "BF561" help @@ -224,39 +249,39 @@ config TICK_SOURCE_SYSTMR0 config BF_REV_MIN int - default 0 if (BF51x || BF52x || BF54x) + default 0 if (BF51x || BF52x || (BF54x && !BF54xM)) default 2 if (BF537 || BF536 || BF534) - default 3 if (BF561 ||BF533 || BF532 || BF531) + default 3 if (BF561 || BF533 || BF532 || BF531 || BF54xM) default 4 if (BF538 || BF539) config BF_REV_MAX int - default 2 if (BF51x || BF52x || BF54x) - default 3 if (BF537 || BF536 || BF534) + default 2 if (BF51x || BF52x || (BF54x && !BF54xM)) + default 3 if (BF537 || BF536 || BF534 || BF54xM) default 5 if (BF561 || BF538 || BF539) default 6 if (BF533 || BF532 || BF531) choice prompt "Silicon Rev" - default BF_REV_0_1 if (BF51x || BF52x || BF54x) + default BF_REV_0_1 if (BF51x || BF52x || (BF54x && !BF54xM)) default BF_REV_0_2 if (BF534 || BF536 || BF537) - default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF561) + default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF54xM || BF561) config BF_REV_0_0 bool "0.0" - depends on (BF51x || BF52x || BF54x) + depends on (BF51x || BF52x || (BF54x && !BF54xM)) config BF_REV_0_1 bool "0.1" - depends on (BF52x || BF54x) + depends on (BF52x || (BF54x && !BF54xM)) config BF_REV_0_2 bool "0.2" - depends on (BF52x || BF537 || BF536 || BF534 || BF54x) + depends on (BF52x || BF537 || BF536 || BF534 || (BF54x && !BF54xM)) config BF_REV_0_3 bool "0.3" - depends on (BF561 || BF537 || BF536 || BF534 || BF533 || BF532 || BF531) + depends on (BF54xM || BF561 || BF537 || BF536 || BF534 || BF533 || BF532 || BF531) config BF_REV_0_4 bool "0.4" @@ -293,9 +318,14 @@ config BF53x depends on (BF531 || BF532 || BF533 || BF534 || BF536 || BF537) default y +config BF54xM + bool + depends on (BF542M || BF544M || BF547M || BF548M || BF549M) + default y + config BF54x bool - depends on (BF542 || BF544 || BF547 || BF548 || BF549) + depends on (BF542 || BF544 || BF547 || BF548 || BF549 || BF54xM) default y config MEM_GENERIC_BOARD diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile index e550c8d46066..8dd003b1aa8e 100644 --- a/arch/blackfin/Makefile +++ b/arch/blackfin/Makefile @@ -40,10 +40,15 @@ machine-$(CONFIG_BF537) := bf537 machine-$(CONFIG_BF538) := bf538 machine-$(CONFIG_BF539) := bf538 machine-$(CONFIG_BF542) := bf548 +machine-$(CONFIG_BF542M) := bf548 machine-$(CONFIG_BF544) := bf548 +machine-$(CONFIG_BF544M) := bf548 machine-$(CONFIG_BF547) := bf548 +machine-$(CONFIG_BF547M) := bf548 machine-$(CONFIG_BF548) := bf548 +machine-$(CONFIG_BF548M) := bf548 machine-$(CONFIG_BF549) := bf548 +machine-$(CONFIG_BF549M) := bf548 machine-$(CONFIG_BF561) := bf561 MACHINE := $(machine-y) export MACHINE @@ -67,10 +72,15 @@ cpu-$(CONFIG_BF537) := bf537 cpu-$(CONFIG_BF538) := bf538 cpu-$(CONFIG_BF539) := bf539 cpu-$(CONFIG_BF542) := bf542 +cpu-$(CONFIG_BF542M) := bf542m cpu-$(CONFIG_BF544) := bf544 +cpu-$(CONFIG_BF544M) := bf544m cpu-$(CONFIG_BF547) := bf547 +cpu-$(CONFIG_BF547M) := bf547m cpu-$(CONFIG_BF548) := bf548 +cpu-$(CONFIG_BF548M) := bf548m cpu-$(CONFIG_BF549) := bf549 +cpu-$(CONFIG_BF549M) := bf549m cpu-$(CONFIG_BF561) := bf561 rev-$(CONFIG_BF_REV_0_0) := 0.0 diff --git a/arch/blackfin/mach-bf548/include/mach/bf548.h b/arch/blackfin/mach-bf548/include/mach/bf548.h index f0e569984810..cd31f72bdd82 100644 --- a/arch/blackfin/mach-bf548/include/mach/bf548.h +++ b/arch/blackfin/mach-bf548/include/mach/bf548.h @@ -104,6 +104,18 @@ #define AMGCTLVAL (V_AMBEN | V_AMCKEN) +#if defined(CONFIG_BF542M) +# define CONFIG_BF542 +#elif defined(CONFIG_BF544M) +# define CONFIG_BF544 +#elif defined(CONFIG_BF547M) +# define CONFIG_BF547 +#elif defined(CONFIG_BF548M) +# define CONFIG_BF548 +#elif defined(CONFIG_BF549M) +# define CONFIG_BF549 +#endif + #if defined(CONFIG_BF542) # define CPU "BF542" # define CPUID 0x27de -- cgit v1.2.2 From 4c4073d49f578422537ce16f6d42ebeb4f741e6d Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 4 Feb 2009 16:49:45 +0800 Subject: Blackfin arch: line up machine-/cpu- vars after BF54xM addition Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/Makefile | 96 +++++++++++++++++++++++++------------------------- 1 file changed, 48 insertions(+), 48 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile index 8dd003b1aa8e..d54c8283825c 100644 --- a/arch/blackfin/Makefile +++ b/arch/blackfin/Makefile @@ -21,67 +21,67 @@ KALLSYMS += --symbol-prefix=_ KBUILD_DEFCONFIG := BF537-STAMP_defconfig # setup the machine name and the machine dependent settings -machine-$(CONFIG_BF512) := bf518 -machine-$(CONFIG_BF514) := bf518 -machine-$(CONFIG_BF516) := bf518 -machine-$(CONFIG_BF518) := bf518 -machine-$(CONFIG_BF522) := bf527 -machine-$(CONFIG_BF523) := bf527 -machine-$(CONFIG_BF524) := bf527 -machine-$(CONFIG_BF525) := bf527 -machine-$(CONFIG_BF526) := bf527 -machine-$(CONFIG_BF527) := bf527 -machine-$(CONFIG_BF531) := bf533 -machine-$(CONFIG_BF532) := bf533 -machine-$(CONFIG_BF533) := bf533 -machine-$(CONFIG_BF534) := bf537 -machine-$(CONFIG_BF536) := bf537 -machine-$(CONFIG_BF537) := bf537 -machine-$(CONFIG_BF538) := bf538 -machine-$(CONFIG_BF539) := bf538 -machine-$(CONFIG_BF542) := bf548 +machine-$(CONFIG_BF512) := bf518 +machine-$(CONFIG_BF514) := bf518 +machine-$(CONFIG_BF516) := bf518 +machine-$(CONFIG_BF518) := bf518 +machine-$(CONFIG_BF522) := bf527 +machine-$(CONFIG_BF523) := bf527 +machine-$(CONFIG_BF524) := bf527 +machine-$(CONFIG_BF525) := bf527 +machine-$(CONFIG_BF526) := bf527 +machine-$(CONFIG_BF527) := bf527 +machine-$(CONFIG_BF531) := bf533 +machine-$(CONFIG_BF532) := bf533 +machine-$(CONFIG_BF533) := bf533 +machine-$(CONFIG_BF534) := bf537 +machine-$(CONFIG_BF536) := bf537 +machine-$(CONFIG_BF537) := bf537 +machine-$(CONFIG_BF538) := bf538 +machine-$(CONFIG_BF539) := bf538 +machine-$(CONFIG_BF542) := bf548 machine-$(CONFIG_BF542M) := bf548 -machine-$(CONFIG_BF544) := bf548 +machine-$(CONFIG_BF544) := bf548 machine-$(CONFIG_BF544M) := bf548 -machine-$(CONFIG_BF547) := bf548 +machine-$(CONFIG_BF547) := bf548 machine-$(CONFIG_BF547M) := bf548 -machine-$(CONFIG_BF548) := bf548 +machine-$(CONFIG_BF548) := bf548 machine-$(CONFIG_BF548M) := bf548 -machine-$(CONFIG_BF549) := bf548 +machine-$(CONFIG_BF549) := bf548 machine-$(CONFIG_BF549M) := bf548 -machine-$(CONFIG_BF561) := bf561 +machine-$(CONFIG_BF561) := bf561 MACHINE := $(machine-y) export MACHINE -cpu-$(CONFIG_BF512) := bf512 -cpu-$(CONFIG_BF514) := bf514 -cpu-$(CONFIG_BF516) := bf516 -cpu-$(CONFIG_BF518) := bf518 -cpu-$(CONFIG_BF522) := bf522 -cpu-$(CONFIG_BF523) := bf523 -cpu-$(CONFIG_BF524) := bf524 -cpu-$(CONFIG_BF525) := bf525 -cpu-$(CONFIG_BF526) := bf526 -cpu-$(CONFIG_BF527) := bf527 -cpu-$(CONFIG_BF531) := bf531 -cpu-$(CONFIG_BF532) := bf532 -cpu-$(CONFIG_BF533) := bf533 -cpu-$(CONFIG_BF534) := bf534 -cpu-$(CONFIG_BF536) := bf536 -cpu-$(CONFIG_BF537) := bf537 -cpu-$(CONFIG_BF538) := bf538 -cpu-$(CONFIG_BF539) := bf539 -cpu-$(CONFIG_BF542) := bf542 +cpu-$(CONFIG_BF512) := bf512 +cpu-$(CONFIG_BF514) := bf514 +cpu-$(CONFIG_BF516) := bf516 +cpu-$(CONFIG_BF518) := bf518 +cpu-$(CONFIG_BF522) := bf522 +cpu-$(CONFIG_BF523) := bf523 +cpu-$(CONFIG_BF524) := bf524 +cpu-$(CONFIG_BF525) := bf525 +cpu-$(CONFIG_BF526) := bf526 +cpu-$(CONFIG_BF527) := bf527 +cpu-$(CONFIG_BF531) := bf531 +cpu-$(CONFIG_BF532) := bf532 +cpu-$(CONFIG_BF533) := bf533 +cpu-$(CONFIG_BF534) := bf534 +cpu-$(CONFIG_BF536) := bf536 +cpu-$(CONFIG_BF537) := bf537 +cpu-$(CONFIG_BF538) := bf538 +cpu-$(CONFIG_BF539) := bf539 +cpu-$(CONFIG_BF542) := bf542 cpu-$(CONFIG_BF542M) := bf542m -cpu-$(CONFIG_BF544) := bf544 +cpu-$(CONFIG_BF544) := bf544 cpu-$(CONFIG_BF544M) := bf544m -cpu-$(CONFIG_BF547) := bf547 +cpu-$(CONFIG_BF547) := bf547 cpu-$(CONFIG_BF547M) := bf547m -cpu-$(CONFIG_BF548) := bf548 +cpu-$(CONFIG_BF548) := bf548 cpu-$(CONFIG_BF548M) := bf548m -cpu-$(CONFIG_BF549) := bf549 +cpu-$(CONFIG_BF549) := bf549 cpu-$(CONFIG_BF549M) := bf549m -cpu-$(CONFIG_BF561) := bf561 +cpu-$(CONFIG_BF561) := bf561 rev-$(CONFIG_BF_REV_0_0) := 0.0 rev-$(CONFIG_BF_REV_0_1) := 0.1 -- cgit v1.2.2 From c6bbd8ac54742f657bd223e03b5b70e73ba092cd Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Wed, 4 Feb 2009 16:49:45 +0800 Subject: Blackfin arch: enable bfin_eth in bf51x by default Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu --- arch/blackfin/configs/BF518F-EZBRD_defconfig | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig index defb9785c65b..18e9784376f2 100644 --- a/arch/blackfin/configs/BF518F-EZBRD_defconfig +++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig @@ -1,6 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.28-rc2 +# Fri Jan 9 17:58:41 2009 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -149,6 +150,7 @@ CONFIG_BF_REV_0_0=y # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set CONFIG_BF51x=y +CONFIG_MEM_MT48LC32M8A2_75=y CONFIG_BFIN518F_EZBRD=y # @@ -598,7 +600,10 @@ CONFIG_PHYLIB=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_BFIN_MAC is not set +CONFIG_BFIN_MAC=y +CONFIG_BFIN_TX_DESC_NUM=10 +CONFIG_BFIN_RX_DESC_NUM=20 +# CONFIG_BFIN_MAC_RMII is not set # CONFIG_SMC91X is not set # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set -- cgit v1.2.2 From 41245ac5952e5b05e6fbb7c188eae0947f640189 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 4 Feb 2009 16:49:45 +0800 Subject: Blackfin arch: fix bug - Dmacopy failed in BF537-STAMP Dmacopy failed in BF537-STAMP when copy from SRAM to SDRAM and kernel will reboot automatically. Fixing by doing a SSYNC before mucking with DMA registers Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/kernel/bfin_dma_5xx.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index 07e02c0d1c07..8531693fb48d 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -249,6 +249,13 @@ static void __dma_memcpy(u32 daddr, s16 dmod, u32 saddr, s16 smod, size_t cnt, u spin_lock_irqsave(&mdma_lock, flags); + /* Force a sync in case a previous config reset on this channel + * occurred. This is needed so subsequent writes to DMA registers + * are not spuriously lost/corrupted. Do it under irq lock and + * without the anomaly version (because we are atomic already). + */ + __builtin_bfin_ssync(); + if (bfin_read_MDMA_S0_CONFIG()) while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)) continue; -- cgit v1.2.2 From 331693129d1764e38b15561e5712347fd591b2a9 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Wed, 4 Feb 2009 16:49:45 +0800 Subject: Blackfin arch: Fix Bug - Kernel does not boot if re-program clocks On BF561 EBIU_SDGCTL bit 31 controls the SDRAM external data path width, typically set 0 for a 32-bit bus width. On other Blackfin derivatives this bit should be set by default. Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/include/asm/mem_init.h | 2 +- arch/blackfin/mach-common/clocks-init.c | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/include/asm/mem_init.h b/arch/blackfin/include/asm/mem_init.h index 255a9316ad36..61f7487fbf12 100644 --- a/arch/blackfin/include/asm/mem_init.h +++ b/arch/blackfin/include/asm/mem_init.h @@ -115,7 +115,7 @@ #define mem_SDRRC (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num) /* Enable SCLK Out */ -#define mem_SDGCTL (0x80000000 | SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS) +#define mem_SDGCTL (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS) #else #define mem_SDRRC CONFIG_MEM_SDRRC #define mem_SDGCTL CONFIG_MEM_SDGCTL diff --git a/arch/blackfin/mach-common/clocks-init.c b/arch/blackfin/mach-common/clocks-init.c index 5d182abefc7b..9dddb6f8cc85 100644 --- a/arch/blackfin/mach-common/clocks-init.c +++ b/arch/blackfin/mach-common/clocks-init.c @@ -14,6 +14,7 @@ #include #include +#define SDGCTL_WIDTH (1 << 31) /* SDRAM external data path width */ #define PLL_CTL_VAL \ (((CONFIG_VCO_MULT & 63) << 9) | CLKIN_HALF | \ (PLL_BYPASS << 8) | (ANOMALY_05000265 ? 0x8000 : 0)) @@ -76,7 +77,7 @@ void init_clocks(void) bfin_write_PLL_DIV(CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); #ifdef EBIU_SDGCTL bfin_write_EBIU_SDRRC(mem_SDRRC); - bfin_write_EBIU_SDGCTL(mem_SDGCTL); + bfin_write_EBIU_SDGCTL((bfin_read_EBIU_SDGCTL() & SDGCTL_WIDTH) | mem_SDGCTL); #else bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() & ~(SRREQ)); do_sync(); -- cgit v1.2.2 From 5e7bb132bbed2088b8b103e410d143b341dcb837 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Wed, 4 Feb 2009 16:49:45 +0800 Subject: Blackfin arch: Fix Bug - request lines with peripheral_request_list, but don't get freed with peripheral_free_list Remove erroneous check_gpio(ident) in peripheral_free() Reported-by: Michael McTernan Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/kernel/bfin_gpio.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index 4c14331978f6..ea67ae5b033e 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -977,9 +977,6 @@ void peripheral_free(unsigned short per) if (!(per & P_DEFINED)) return; - if (check_gpio(ident) < 0) - return; - local_irq_save_hw(flags); if (unlikely(!(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident)))) { -- cgit v1.2.2 From a2be3931144b8fab73c3d876c148ada7a3c09066 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Wed, 4 Feb 2009 16:49:45 +0800 Subject: Blackfin arch: reset POLAR setting when acquiring a gpio for the first time when requesting a GPIO for the first time, the POLAR setting is not set to a sane state. this can lead to indeterminate behavior that cannot be resolved without an explicit write to the Blackfin port POLAR register. when requesting a GPIO for the first time via gpio_request(), the POLAR setting for the GPIO in question should be set to sane state. this should occur if the GPIO has not been allocated in any other way. some examples: - when doing something like "request_irq(); gpio_request();" on the same GPIO, the POLAR setting should not be reset. - when doing "gpio_request(); gpio_request();" on the same GPIO, the POLAR setting should be reset only the first time and not the second. Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/kernel/bfin_gpio.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index ea67ae5b033e..0c4fc31029c2 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -1053,9 +1053,15 @@ int bfin_gpio_request(unsigned gpio, const char *label) local_irq_restore_hw(flags); return -EBUSY; } - if (unlikely(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio))) + if (unlikely(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio))) { printk(KERN_NOTICE "bfin-gpio: GPIO %d is already reserved as gpio-irq!" " (Documentation/blackfin/bfin-gpio-notes.txt)\n", gpio); + } +#ifndef BF548_FAMILY + else { /* Reset POLAR setting when acquiring a gpio for the first time */ + set_gpio_polar(gpio, 0); + } +#endif reserved_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio); set_label(gpio, label); -- cgit v1.2.2 From 76e8fe4da652b020e08089415c684a365bb5b6a9 Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Wed, 4 Feb 2009 16:49:45 +0800 Subject: Blackfin arch: Print out where the bootmode is coming from (for easier debugging). Signed-off-by: Robin Getz Signed-off-by: Bryan Wu --- arch/blackfin/kernel/setup.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index b2a811347b65..a23fec573c0a 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -824,6 +824,8 @@ void __init setup_arch(char **cmdline_p) flash_probe(); #endif + printk(KERN_INFO "Boot Mode: %i\n", bfin_read_SYSCR() & 0xF); + _bfin_swrst = bfin_read_SWRST(); #ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT -- cgit v1.2.2 From 2f95d5bd84bfbe8cf62cb1c4306354cfc139370b Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Wed, 4 Feb 2009 16:49:45 +0800 Subject: Blackfin arch: don't accidently re-enable interrupts Make sure we don't accidently re-enable interrupts if we are being called in atomic context Signed-off-by: Robin Getz Signed-off-by: Bryan Wu --- arch/blackfin/kernel/traps.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 5b0667da8d05..f18c2481e9b7 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -1052,8 +1052,9 @@ void show_regs(struct pt_regs *fp) char buf [150]; struct irqaction *action; unsigned int i; - unsigned long flags; + unsigned long flags = 0; unsigned int cpu = smp_processor_id(); + unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic(); verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\t\t%s\n", print_tainted()); verbose_printk(KERN_NOTICE " SEQSTAT: %08lx IPEND: %04lx SYSCFG: %04lx\n", @@ -1073,17 +1074,22 @@ void show_regs(struct pt_regs *fp) } verbose_printk(KERN_NOTICE " EXCAUSE : 0x%lx\n", fp->seqstat & SEQSTAT_EXCAUSE); - for (i = 6; i <= 15 ; i++) { + for (i = 2; i <= 15 ; i++) { if (fp->ipend & (1 << i)) { - decode_address(buf, bfin_read32(EVT0 + 4*i)); - verbose_printk(KERN_NOTICE " physical IVG%i asserted : %s\n", i, buf); + if (i != 4) { + decode_address(buf, bfin_read32(EVT0 + 4*i)); + verbose_printk(KERN_NOTICE " physical IVG%i asserted : %s\n", i, buf); + } else + verbose_printk(KERN_NOTICE " interrupts disabled\n"); } } /* if no interrupts are going off, don't print this out */ if (fp->ipend & ~0x3F) { for (i = 0; i < (NR_IRQS - 1); i++) { - spin_lock_irqsave(&irq_desc[i].lock, flags); + if (!in_atomic) + spin_lock_irqsave(&irq_desc[i].lock, flags); + action = irq_desc[i].action; if (!action) goto unlock; @@ -1096,7 +1102,8 @@ void show_regs(struct pt_regs *fp) } verbose_printk("\n"); unlock: - spin_unlock_irqrestore(&irq_desc[i].lock, flags); + if (!in_atomic) + spin_unlock_irqrestore(&irq_desc[i].lock, flags); } } -- cgit v1.2.2 From 45c4f2a0b6c6302c5617534b8189c0e9b5a4a048 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-Koenig Date: Wed, 4 Feb 2009 17:02:30 +0800 Subject: Blackfin arch: explicit add a might sleep to gpio_free According to the documentation gpio_free should only be called from task context only. To make this more explicit add a might sleep to all implementations. This patch changes the gpio_free implementations for the blackfin architecture. Signed-off-by: Uwe Kleine-Koenig Cc: David Brownell Acked-by: Bryan Wu Signed-off-by: Andrew Morton --- arch/blackfin/kernel/bfin_gpio.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index 0c4fc31029c2..05bf85ba7443 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -1081,6 +1081,8 @@ void bfin_gpio_free(unsigned gpio) if (check_gpio(gpio) < 0) return; + might_sleep(); + local_irq_save_hw(flags); if (unlikely(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) { -- cgit v1.2.2 From 881eb621fc191e58fa638c533073683be2b63c24 Mon Sep 17 00:00:00 2001 From: Jie Zhang Date: Wed, 4 Feb 2009 16:49:45 +0800 Subject: Blackfin arch: Add one more check on `fp' to prevent double fault Signed-off-by: Jie Zhang Signed-off-by: Bryan Wu --- arch/blackfin/kernel/traps.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index f18c2481e9b7..79926413c0eb 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -820,11 +820,8 @@ void show_stack(struct task_struct *task, unsigned long *stack) decode_address(buf, (unsigned int)stack); printk(KERN_NOTICE " SP: [0x%p] %s\n", stack, buf); - addr = (unsigned int *)((unsigned int)stack & ~0x3F); - /* First thing is to look for a frame pointer */ - for (addr = (unsigned int *)((unsigned int)stack & ~0xF), i = 0; - addr < endstack; addr++, i++) { + for (addr = (unsigned int *)((unsigned int)stack & ~0xF); addr < endstack; addr++) { if (*addr & 0x1) continue; ins_addr = (unsigned short *)*addr; @@ -834,7 +831,8 @@ void show_stack(struct task_struct *task, unsigned long *stack) if (fp) { /* Let's check to see if it is a frame pointer */ - while (fp >= (addr - 1) && fp < endstack && fp) + while (fp >= (addr - 1) && fp < endstack + && fp && ((unsigned int) fp & 0x3) == 0) fp = (unsigned int *)*fp; if (fp == 0 || fp == endstack) { fp = addr - 1; -- cgit v1.2.2 From f556309ea0d6a4adb0ad9775e5a18aa3564a0e4f Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 4 Feb 2009 16:49:45 +0800 Subject: Blackfin arch: cleanup bf54x ifdef mess in gpio code merge more of the bf54x and !bf54x gpio code together to cut down on #ifdef mess Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/include/asm/gpio.h | 58 --- arch/blackfin/kernel/bfin_gpio.c | 547 ++++++++++----------------- arch/blackfin/mach-bf548/include/mach/gpio.h | 12 +- 3 files changed, 208 insertions(+), 409 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h index 9477d82fcad2..d4a082ef75b4 100644 --- a/arch/blackfin/include/asm/gpio.h +++ b/arch/blackfin/include/asm/gpio.h @@ -27,60 +27,6 @@ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -/* -* Number BF537/6/4 BF561 BF533/2/1 -* BF527/5/2 -* -* GPIO_0 PF0 PF0 PF0 -* GPIO_1 PF1 PF1 PF1 -* GPIO_2 PF2 PF2 PF2 -* GPIO_3 PF3 PF3 PF3 -* GPIO_4 PF4 PF4 PF4 -* GPIO_5 PF5 PF5 PF5 -* GPIO_6 PF6 PF6 PF6 -* GPIO_7 PF7 PF7 PF7 -* GPIO_8 PF8 PF8 PF8 -* GPIO_9 PF9 PF9 PF9 -* GPIO_10 PF10 PF10 PF10 -* GPIO_11 PF11 PF11 PF11 -* GPIO_12 PF12 PF12 PF12 -* GPIO_13 PF13 PF13 PF13 -* GPIO_14 PF14 PF14 PF14 -* GPIO_15 PF15 PF15 PF15 -* GPIO_16 PG0 PF16 -* GPIO_17 PG1 PF17 -* GPIO_18 PG2 PF18 -* GPIO_19 PG3 PF19 -* GPIO_20 PG4 PF20 -* GPIO_21 PG5 PF21 -* GPIO_22 PG6 PF22 -* GPIO_23 PG7 PF23 -* GPIO_24 PG8 PF24 -* GPIO_25 PG9 PF25 -* GPIO_26 PG10 PF26 -* GPIO_27 PG11 PF27 -* GPIO_28 PG12 PF28 -* GPIO_29 PG13 PF29 -* GPIO_30 PG14 PF30 -* GPIO_31 PG15 PF31 -* GPIO_32 PH0 PF32 -* GPIO_33 PH1 PF33 -* GPIO_34 PH2 PF34 -* GPIO_35 PH3 PF35 -* GPIO_36 PH4 PF36 -* GPIO_37 PH5 PF37 -* GPIO_38 PH6 PF38 -* GPIO_39 PH7 PF39 -* GPIO_40 PH8 PF40 -* GPIO_41 PH9 PF41 -* GPIO_42 PH10 PF42 -* GPIO_43 PH11 PF43 -* GPIO_44 PH12 PF44 -* GPIO_45 PH13 PF45 -* GPIO_46 PH14 PF46 -* GPIO_47 PH15 PF47 -*/ - #ifndef __ARCH_BLACKFIN_GPIO_H__ #define __ARCH_BLACKFIN_GPIO_H__ @@ -295,10 +241,6 @@ int bfin_gpio_direction_output(unsigned gpio, int value); int bfin_gpio_get_value(unsigned gpio); void bfin_gpio_set_value(unsigned gpio, int value); -#ifndef BF548_FAMILY -#define bfin_gpio_set_value(gpio, value) set_gpio_data(gpio, value) -#endif - #ifdef CONFIG_GPIOLIB #include /* cansleep wrappers */ diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index 05bf85ba7443..7f69f43be987 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -27,59 +27,6 @@ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -/* -* Number BF537/6/4 BF561 BF533/2/1 BF549/8/4/2 -* -* GPIO_0 PF0 PF0 PF0 PA0...PJ13 -* GPIO_1 PF1 PF1 PF1 -* GPIO_2 PF2 PF2 PF2 -* GPIO_3 PF3 PF3 PF3 -* GPIO_4 PF4 PF4 PF4 -* GPIO_5 PF5 PF5 PF5 -* GPIO_6 PF6 PF6 PF6 -* GPIO_7 PF7 PF7 PF7 -* GPIO_8 PF8 PF8 PF8 -* GPIO_9 PF9 PF9 PF9 -* GPIO_10 PF10 PF10 PF10 -* GPIO_11 PF11 PF11 PF11 -* GPIO_12 PF12 PF12 PF12 -* GPIO_13 PF13 PF13 PF13 -* GPIO_14 PF14 PF14 PF14 -* GPIO_15 PF15 PF15 PF15 -* GPIO_16 PG0 PF16 -* GPIO_17 PG1 PF17 -* GPIO_18 PG2 PF18 -* GPIO_19 PG3 PF19 -* GPIO_20 PG4 PF20 -* GPIO_21 PG5 PF21 -* GPIO_22 PG6 PF22 -* GPIO_23 PG7 PF23 -* GPIO_24 PG8 PF24 -* GPIO_25 PG9 PF25 -* GPIO_26 PG10 PF26 -* GPIO_27 PG11 PF27 -* GPIO_28 PG12 PF28 -* GPIO_29 PG13 PF29 -* GPIO_30 PG14 PF30 -* GPIO_31 PG15 PF31 -* GPIO_32 PH0 PF32 -* GPIO_33 PH1 PF33 -* GPIO_34 PH2 PF34 -* GPIO_35 PH3 PF35 -* GPIO_36 PH4 PF36 -* GPIO_37 PH5 PF37 -* GPIO_38 PH6 PF38 -* GPIO_39 PH7 PF39 -* GPIO_40 PH8 PF40 -* GPIO_41 PH9 PF41 -* GPIO_42 PH10 PF42 -* GPIO_43 PH11 PF43 -* GPIO_44 PH12 PF44 -* GPIO_45 PH13 PF45 -* GPIO_46 PH14 PF46 -* GPIO_47 PH15 PF47 -*/ - #include #include #include @@ -119,28 +66,42 @@ enum { #define AWA_DUMMY_READ(...) do { } while (0) #endif +static struct gpio_port_t * const gpio_array[] = { #if defined(BF533_FAMILY) || defined(BF538_FAMILY) -static struct gpio_port_t *gpio_bankb[] = { (struct gpio_port_t *) FIO_FLAG_D, -}; -#endif - -#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY) -static struct gpio_port_t *gpio_bankb[] = { +#elif defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY) (struct gpio_port_t *) PORTFIO, (struct gpio_port_t *) PORTGIO, (struct gpio_port_t *) PORTHIO, +#elif defined(BF561_FAMILY) + (struct gpio_port_t *) FIO0_FLAG_D, + (struct gpio_port_t *) FIO1_FLAG_D, + (struct gpio_port_t *) FIO2_FLAG_D, +#elif defined(BF548_FAMILY) + (struct gpio_port_t *)PORTA_FER, + (struct gpio_port_t *)PORTB_FER, + (struct gpio_port_t *)PORTC_FER, + (struct gpio_port_t *)PORTD_FER, + (struct gpio_port_t *)PORTE_FER, + (struct gpio_port_t *)PORTF_FER, + (struct gpio_port_t *)PORTG_FER, + (struct gpio_port_t *)PORTH_FER, + (struct gpio_port_t *)PORTI_FER, + (struct gpio_port_t *)PORTJ_FER, +#else +# error no gpio arrays defined +#endif }; -static unsigned short *port_fer[] = { +#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY) +static unsigned short * const port_fer[] = { (unsigned short *) PORTF_FER, (unsigned short *) PORTG_FER, (unsigned short *) PORTH_FER, }; -#endif -#if defined(BF527_FAMILY) || defined(BF518_FAMILY) -static unsigned short *port_mux[] = { +# if !defined(BF537_FAMILY) +static unsigned short * const port_mux[] = { (unsigned short *) PORTF_MUX, (unsigned short *) PORTG_MUX, (unsigned short *) PORTH_MUX, @@ -152,29 +113,7 @@ u8 pmux_offset[][16] = { 0, 0, 0, 0, 0, 2, 2, 4, 4, 6, 8, 10, 10, 10, 12, 12 }, /* PORTG */ { 0, 0, 0, 0, 0, 0, 0, 0, 2, 4, 4, 4, 4, 4, 4, 4 }, /* PORTH */ }; -#endif - -#ifdef BF561_FAMILY -static struct gpio_port_t *gpio_bankb[] = { - (struct gpio_port_t *) FIO0_FLAG_D, - (struct gpio_port_t *) FIO1_FLAG_D, - (struct gpio_port_t *) FIO2_FLAG_D, -}; -#endif - -#ifdef BF548_FAMILY -static struct gpio_port_t *gpio_array[] = { - (struct gpio_port_t *)PORTA_FER, - (struct gpio_port_t *)PORTB_FER, - (struct gpio_port_t *)PORTC_FER, - (struct gpio_port_t *)PORTD_FER, - (struct gpio_port_t *)PORTE_FER, - (struct gpio_port_t *)PORTF_FER, - (struct gpio_port_t *)PORTG_FER, - (struct gpio_port_t *)PORTH_FER, - (struct gpio_port_t *)PORTI_FER, - (struct gpio_port_t *)PORTJ_FER, -}; +# endif #endif static unsigned short reserved_gpio_map[GPIO_BANK_NUM]; @@ -188,35 +127,9 @@ static struct str_ident { } str_ident[MAX_RESOURCES]; #if defined(CONFIG_PM) -#if defined(CONFIG_BF54x) static struct gpio_port_s gpio_bank_saved[GPIO_BANK_NUM]; -#else -static unsigned short wakeup_map[GPIO_BANK_NUM]; -static unsigned char wakeup_flags_map[MAX_BLACKFIN_GPIOS]; -static struct gpio_port_s gpio_bank_saved[GPIO_BANK_NUM]; - -#ifdef BF533_FAMILY -static unsigned int sic_iwr_irqs[] = {IRQ_PROG_INTB}; -#endif - -#ifdef BF537_FAMILY -static unsigned int sic_iwr_irqs[] = {IRQ_PROG_INTB, IRQ_PORTG_INTB, IRQ_MAC_TX}; -#endif - -#ifdef BF538_FAMILY -static unsigned int sic_iwr_irqs[] = {IRQ_PORTF_INTB}; -#endif - -#if defined(BF527_FAMILY) || defined(BF518_FAMILY) -static unsigned int sic_iwr_irqs[] = {IRQ_PORTF_INTB, IRQ_PORTG_INTB, IRQ_PORTH_INTB}; #endif -#ifdef BF561_FAMILY -static unsigned int sic_iwr_irqs[] = {IRQ_PROG0_INTB, IRQ_PROG1_INTB, IRQ_PROG2_INTB}; -#endif -#endif -#endif /* CONFIG_PM */ - inline int check_gpio(unsigned gpio) { #if defined(BF548_FAMILY) @@ -330,9 +243,10 @@ static struct { {.res = P_SPI0_SSEL3, .offset = 0}, }; -static void portmux_setup(unsigned short per, unsigned short function) +static void portmux_setup(unsigned short per) { u16 y, offset, muxreg; + u16 function = P_FUNCT2MUX(per); for (y = 0; y < ARRAY_SIZE(port_mux_lut); y++) { if (port_mux_lut[y].res == per) { @@ -353,30 +267,33 @@ static void portmux_setup(unsigned short per, unsigned short function) } } #elif defined(BF548_FAMILY) -inline void portmux_setup(unsigned short portno, unsigned short function) +inline void portmux_setup(unsigned short per) { u32 pmux; + u16 ident = P_IDENT(per); + u16 function = P_FUNCT2MUX(per); - pmux = gpio_array[gpio_bank(portno)]->port_mux; + pmux = gpio_array[gpio_bank(ident)]->port_mux; - pmux &= ~(0x3 << (2 * gpio_sub_n(portno))); - pmux |= (function & 0x3) << (2 * gpio_sub_n(portno)); + pmux &= ~(0x3 << (2 * gpio_sub_n(ident))); + pmux |= (function & 0x3) << (2 * gpio_sub_n(ident)); - gpio_array[gpio_bank(portno)]->port_mux = pmux; + gpio_array[gpio_bank(ident)]->port_mux = pmux; } -inline u16 get_portmux(unsigned short portno) +inline u16 get_portmux(unsigned short per) { u32 pmux; + u16 ident = P_IDENT(per); - pmux = gpio_array[gpio_bank(portno)]->port_mux; + pmux = gpio_array[gpio_bank(ident)]->port_mux; - return (pmux >> (2 * gpio_sub_n(portno)) & 0x3); + return (pmux >> (2 * gpio_sub_n(ident)) & 0x3); } #elif defined(BF527_FAMILY) || defined(BF518_FAMILY) -inline void portmux_setup(unsigned short portno, unsigned short function) +inline void portmux_setup(unsigned short per) { - u16 pmux, ident = P_IDENT(portno); + u16 pmux, ident = P_IDENT(per), function = P_FUNCT2MUX(per); u8 offset = pmux_offset[gpio_bank(ident)][gpio_sub_n(ident)]; pmux = *port_mux[gpio_bank(ident)]; @@ -424,90 +341,71 @@ void set_gpio_ ## name(unsigned gpio, unsigned short arg) \ unsigned long flags; \ local_irq_save_hw(flags); \ if (arg) \ - gpio_bankb[gpio_bank(gpio)]->name |= gpio_bit(gpio); \ + gpio_array[gpio_bank(gpio)]->name |= gpio_bit(gpio); \ else \ - gpio_bankb[gpio_bank(gpio)]->name &= ~gpio_bit(gpio); \ + gpio_array[gpio_bank(gpio)]->name &= ~gpio_bit(gpio); \ AWA_DUMMY_READ(name); \ local_irq_restore_hw(flags); \ } \ EXPORT_SYMBOL(set_gpio_ ## name); -SET_GPIO(dir) -SET_GPIO(inen) -SET_GPIO(polar) -SET_GPIO(edge) -SET_GPIO(both) +SET_GPIO(dir) /* set_gpio_dir() */ +SET_GPIO(inen) /* set_gpio_inen() */ +SET_GPIO(polar) /* set_gpio_polar() */ +SET_GPIO(edge) /* set_gpio_edge() */ +SET_GPIO(both) /* set_gpio_both() */ -#if ANOMALY_05000311 || ANOMALY_05000323 #define SET_GPIO_SC(name) \ void set_gpio_ ## name(unsigned gpio, unsigned short arg) \ { \ unsigned long flags; \ - local_irq_save_hw(flags); \ - if (arg) \ - gpio_bankb[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \ - else \ - gpio_bankb[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \ - AWA_DUMMY_READ(name); \ - local_irq_restore_hw(flags); \ -} \ -EXPORT_SYMBOL(set_gpio_ ## name); -#else -#define SET_GPIO_SC(name) \ -void set_gpio_ ## name(unsigned gpio, unsigned short arg) \ -{ \ + if (ANOMALY_05000311 || ANOMALY_05000323) \ + local_irq_save_hw(flags); \ if (arg) \ - gpio_bankb[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \ + gpio_array[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \ else \ - gpio_bankb[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \ + gpio_array[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \ + if (ANOMALY_05000311 || ANOMALY_05000323) { \ + AWA_DUMMY_READ(name); \ + local_irq_restore_hw(flags); \ + } \ } \ EXPORT_SYMBOL(set_gpio_ ## name); -#endif SET_GPIO_SC(maska) SET_GPIO_SC(maskb) SET_GPIO_SC(data) -#if ANOMALY_05000311 || ANOMALY_05000323 void set_gpio_toggle(unsigned gpio) { unsigned long flags; - local_irq_save_hw(flags); - gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio); - AWA_DUMMY_READ(toggle); - local_irq_restore_hw(flags); -} -#else -void set_gpio_toggle(unsigned gpio) -{ - gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio); + if (ANOMALY_05000311 || ANOMALY_05000323) + local_irq_save_hw(flags); + gpio_array[gpio_bank(gpio)]->toggle = gpio_bit(gpio); + if (ANOMALY_05000311 || ANOMALY_05000323) { + AWA_DUMMY_READ(toggle); + local_irq_restore_hw(flags); + } } -#endif EXPORT_SYMBOL(set_gpio_toggle); /*Set current PORT date (16-bit word)*/ -#if ANOMALY_05000311 || ANOMALY_05000323 #define SET_GPIO_P(name) \ void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \ { \ unsigned long flags; \ - local_irq_save_hw(flags); \ - gpio_bankb[gpio_bank(gpio)]->name = arg; \ - AWA_DUMMY_READ(name); \ - local_irq_restore_hw(flags); \ -} \ -EXPORT_SYMBOL(set_gpiop_ ## name); -#else -#define SET_GPIO_P(name) \ -void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \ -{ \ - gpio_bankb[gpio_bank(gpio)]->name = arg; \ + if (ANOMALY_05000311 || ANOMALY_05000323) \ + local_irq_save_hw(flags); \ + gpio_array[gpio_bank(gpio)]->name = arg; \ + if (ANOMALY_05000311 || ANOMALY_05000323) { \ + AWA_DUMMY_READ(name); \ + local_irq_restore_hw(flags); \ + } \ } \ EXPORT_SYMBOL(set_gpiop_ ## name); -#endif SET_GPIO_P(data) SET_GPIO_P(dir) @@ -519,27 +417,21 @@ SET_GPIO_P(maska) SET_GPIO_P(maskb) /* Get a specific bit */ -#if ANOMALY_05000311 || ANOMALY_05000323 #define GET_GPIO(name) \ unsigned short get_gpio_ ## name(unsigned gpio) \ { \ unsigned long flags; \ unsigned short ret; \ - local_irq_save_hw(flags); \ - ret = 0x01 & (gpio_bankb[gpio_bank(gpio)]->name >> gpio_sub_n(gpio)); \ - AWA_DUMMY_READ(name); \ - local_irq_restore_hw(flags); \ + if (ANOMALY_05000311 || ANOMALY_05000323) \ + local_irq_save_hw(flags); \ + ret = 0x01 & (gpio_array[gpio_bank(gpio)]->name >> gpio_sub_n(gpio)); \ + if (ANOMALY_05000311 || ANOMALY_05000323) { \ + AWA_DUMMY_READ(name); \ + local_irq_restore_hw(flags); \ + } \ return ret; \ } \ EXPORT_SYMBOL(get_gpio_ ## name); -#else -#define GET_GPIO(name) \ -unsigned short get_gpio_ ## name(unsigned gpio) \ -{ \ - return (0x01 & (gpio_bankb[gpio_bank(gpio)]->name >> gpio_sub_n(gpio))); \ -} \ -EXPORT_SYMBOL(get_gpio_ ## name); -#endif GET_GPIO(data) GET_GPIO(dir) @@ -552,27 +444,21 @@ GET_GPIO(maskb) /*Get current PORT date (16-bit word)*/ -#if ANOMALY_05000311 || ANOMALY_05000323 #define GET_GPIO_P(name) \ unsigned short get_gpiop_ ## name(unsigned gpio) \ { \ unsigned long flags; \ unsigned short ret; \ - local_irq_save_hw(flags); \ - ret = (gpio_bankb[gpio_bank(gpio)]->name); \ - AWA_DUMMY_READ(name); \ - local_irq_restore_hw(flags); \ + if (ANOMALY_05000311 || ANOMALY_05000323) \ + local_irq_save_hw(flags); \ + ret = (gpio_array[gpio_bank(gpio)]->name); \ + if (ANOMALY_05000311 || ANOMALY_05000323) { \ + AWA_DUMMY_READ(name); \ + local_irq_restore_hw(flags); \ + } \ return ret; \ } \ EXPORT_SYMBOL(get_gpiop_ ## name); -#else -#define GET_GPIO_P(name) \ -unsigned short get_gpiop_ ## name(unsigned gpio) \ -{ \ - return (gpio_bankb[gpio_bank(gpio)]->name);\ -} \ -EXPORT_SYMBOL(get_gpiop_ ## name); -#endif GET_GPIO_P(data) GET_GPIO_P(dir) @@ -585,6 +471,26 @@ GET_GPIO_P(maskb) #ifdef CONFIG_PM + +static unsigned short wakeup_map[GPIO_BANK_NUM]; +static unsigned char wakeup_flags_map[MAX_BLACKFIN_GPIOS]; + +static const unsigned int sic_iwr_irqs[] = { +#if defined(BF533_FAMILY) + IRQ_PROG_INTB +#elif defined(BF537_FAMILY) + IRQ_PROG_INTB, IRQ_PORTG_INTB, IRQ_MAC_TX +#elif defined(BF538_FAMILY) + IRQ_PORTF_INTB +#elif defined(BF527_FAMILY) || defined(BF518_FAMILY) + IRQ_PORTF_INTB, IRQ_PORTG_INTB, IRQ_PORTH_INTB +#elif defined(BF561_FAMILY) + IRQ_PROG0_INTB, IRQ_PROG1_INTB, IRQ_PROG2_INTB +#else +# error no SIC_IWR defined +#endif +}; + /*********************************************************** * * FUNCTIONS: Blackfin PM Setup API @@ -669,18 +575,18 @@ u32 bfin_pm_standby_setup(void) mask = wakeup_map[gpio_bank(i)]; bank = gpio_bank(i); - gpio_bank_saved[bank].maskb = gpio_bankb[bank]->maskb; - gpio_bankb[bank]->maskb = 0; + gpio_bank_saved[bank].maskb = gpio_array[bank]->maskb; + gpio_array[bank]->maskb = 0; if (mask) { #if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY) gpio_bank_saved[bank].fer = *port_fer[bank]; #endif - gpio_bank_saved[bank].inen = gpio_bankb[bank]->inen; - gpio_bank_saved[bank].polar = gpio_bankb[bank]->polar; - gpio_bank_saved[bank].dir = gpio_bankb[bank]->dir; - gpio_bank_saved[bank].edge = gpio_bankb[bank]->edge; - gpio_bank_saved[bank].both = gpio_bankb[bank]->both; + gpio_bank_saved[bank].inen = gpio_array[bank]->inen; + gpio_bank_saved[bank].polar = gpio_array[bank]->polar; + gpio_bank_saved[bank].dir = gpio_array[bank]->dir; + gpio_bank_saved[bank].edge = gpio_array[bank]->edge; + gpio_bank_saved[bank].both = gpio_array[bank]->both; gpio_bank_saved[bank].reserved = reserved_gpio_map[bank]; @@ -700,7 +606,7 @@ u32 bfin_pm_standby_setup(void) } bfin_internal_set_wake(sic_iwr_irqs[bank], 1); - gpio_bankb[bank]->maskb_set = wakeup_map[gpio_bank(i)]; + gpio_array[bank]->maskb_set = wakeup_map[gpio_bank(i)]; } } @@ -721,18 +627,18 @@ void bfin_pm_standby_restore(void) #if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY) *port_fer[bank] = gpio_bank_saved[bank].fer; #endif - gpio_bankb[bank]->inen = gpio_bank_saved[bank].inen; - gpio_bankb[bank]->dir = gpio_bank_saved[bank].dir; - gpio_bankb[bank]->polar = gpio_bank_saved[bank].polar; - gpio_bankb[bank]->edge = gpio_bank_saved[bank].edge; - gpio_bankb[bank]->both = gpio_bank_saved[bank].both; + gpio_array[bank]->inen = gpio_bank_saved[bank].inen; + gpio_array[bank]->dir = gpio_bank_saved[bank].dir; + gpio_array[bank]->polar = gpio_bank_saved[bank].polar; + gpio_array[bank]->edge = gpio_bank_saved[bank].edge; + gpio_array[bank]->both = gpio_bank_saved[bank].both; reserved_gpio_map[bank] = gpio_bank_saved[bank].reserved; bfin_internal_set_wake(sic_iwr_irqs[bank], 0); } - gpio_bankb[bank]->maskb = gpio_bank_saved[bank].maskb; + gpio_array[bank]->maskb = gpio_bank_saved[bank].maskb; } AWA_DUMMY_READ(maskb); } @@ -745,21 +651,21 @@ void bfin_gpio_pm_hibernate_suspend(void) bank = gpio_bank(i); #if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY) - gpio_bank_saved[bank].fer = *port_fer[bank]; + gpio_bank_saved[bank].fer = *port_fer[bank]; #if defined(BF527_FAMILY) || defined(BF518_FAMILY) - gpio_bank_saved[bank].mux = *port_mux[bank]; + gpio_bank_saved[bank].mux = *port_mux[bank]; #else - if (bank == 0) - gpio_bank_saved[bank].mux = bfin_read_PORT_MUX(); + if (bank == 0) + gpio_bank_saved[bank].mux = bfin_read_PORT_MUX(); #endif #endif - gpio_bank_saved[bank].data = gpio_bankb[bank]->data; - gpio_bank_saved[bank].inen = gpio_bankb[bank]->inen; - gpio_bank_saved[bank].polar = gpio_bankb[bank]->polar; - gpio_bank_saved[bank].dir = gpio_bankb[bank]->dir; - gpio_bank_saved[bank].edge = gpio_bankb[bank]->edge; - gpio_bank_saved[bank].both = gpio_bankb[bank]->both; - gpio_bank_saved[bank].maska = gpio_bankb[bank]->maska; + gpio_bank_saved[bank].data = gpio_array[bank]->data; + gpio_bank_saved[bank].inen = gpio_array[bank]->inen; + gpio_bank_saved[bank].polar = gpio_array[bank]->polar; + gpio_bank_saved[bank].dir = gpio_array[bank]->dir; + gpio_bank_saved[bank].edge = gpio_array[bank]->edge; + gpio_bank_saved[bank].both = gpio_array[bank]->both; + gpio_bank_saved[bank].maska = gpio_array[bank]->maska; } AWA_DUMMY_READ(maska); @@ -770,27 +676,27 @@ void bfin_gpio_pm_hibernate_restore(void) int i, bank; for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { - bank = gpio_bank(i); + bank = gpio_bank(i); #if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY) #if defined(BF527_FAMILY) || defined(BF518_FAMILY) - *port_mux[bank] = gpio_bank_saved[bank].mux; + *port_mux[bank] = gpio_bank_saved[bank].mux; #else - if (bank == 0) - bfin_write_PORT_MUX(gpio_bank_saved[bank].mux); + if (bank == 0) + bfin_write_PORT_MUX(gpio_bank_saved[bank].mux); #endif - *port_fer[bank] = gpio_bank_saved[bank].fer; + *port_fer[bank] = gpio_bank_saved[bank].fer; #endif - gpio_bankb[bank]->inen = gpio_bank_saved[bank].inen; - gpio_bankb[bank]->dir = gpio_bank_saved[bank].dir; - gpio_bankb[bank]->polar = gpio_bank_saved[bank].polar; - gpio_bankb[bank]->edge = gpio_bank_saved[bank].edge; - gpio_bankb[bank]->both = gpio_bank_saved[bank].both; + gpio_array[bank]->inen = gpio_bank_saved[bank].inen; + gpio_array[bank]->dir = gpio_bank_saved[bank].dir; + gpio_array[bank]->polar = gpio_bank_saved[bank].polar; + gpio_array[bank]->edge = gpio_bank_saved[bank].edge; + gpio_array[bank]->both = gpio_bank_saved[bank].both; - gpio_bankb[bank]->data_set = gpio_bank_saved[bank].data - | gpio_bank_saved[bank].dir; + gpio_array[bank]->data_set = gpio_bank_saved[bank].data + | gpio_bank_saved[bank].dir; - gpio_bankb[bank]->maska = gpio_bank_saved[bank].maska; + gpio_array[bank]->maska = gpio_bank_saved[bank].maska; } AWA_DUMMY_READ(maska); } @@ -817,12 +723,12 @@ void bfin_gpio_pm_hibernate_suspend(void) for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { bank = gpio_bank(i); - gpio_bank_saved[bank].fer = gpio_array[bank]->port_fer; - gpio_bank_saved[bank].mux = gpio_array[bank]->port_mux; - gpio_bank_saved[bank].data = gpio_array[bank]->port_data; - gpio_bank_saved[bank].data = gpio_array[bank]->port_data; - gpio_bank_saved[bank].inen = gpio_array[bank]->port_inen; - gpio_bank_saved[bank].dir = gpio_array[bank]->port_dir_set; + gpio_bank_saved[bank].fer = gpio_array[bank]->port_fer; + gpio_bank_saved[bank].mux = gpio_array[bank]->port_mux; + gpio_bank_saved[bank].data = gpio_array[bank]->data; + gpio_bank_saved[bank].data = gpio_array[bank]->data; + gpio_bank_saved[bank].inen = gpio_array[bank]->inen; + gpio_bank_saved[bank].dir = gpio_array[bank]->dir_set; } } @@ -831,21 +737,21 @@ void bfin_gpio_pm_hibernate_restore(void) int i, bank; for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { - bank = gpio_bank(i); - - gpio_array[bank]->port_mux = gpio_bank_saved[bank].mux; - gpio_array[bank]->port_fer = gpio_bank_saved[bank].fer; - gpio_array[bank]->port_inen = gpio_bank_saved[bank].inen; - gpio_array[bank]->port_dir_set = gpio_bank_saved[bank].dir; - gpio_array[bank]->port_set = gpio_bank_saved[bank].data - | gpio_bank_saved[bank].dir; + bank = gpio_bank(i); + + gpio_array[bank]->port_mux = gpio_bank_saved[bank].mux; + gpio_array[bank]->port_fer = gpio_bank_saved[bank].fer; + gpio_array[bank]->inen = gpio_bank_saved[bank].inen; + gpio_array[bank]->dir_set = gpio_bank_saved[bank].dir; + gpio_array[bank]->data_set = gpio_bank_saved[bank].data + | gpio_bank_saved[bank].dir; } } #endif unsigned short get_gpio_dir(unsigned gpio) { - return (0x01 & (gpio_array[gpio_bank(gpio)]->port_dir_clear >> gpio_sub_n(gpio))); + return (0x01 & (gpio_array[gpio_bank(gpio)]->dir_clear >> gpio_sub_n(gpio))); } EXPORT_SYMBOL(get_gpio_dir); @@ -905,9 +811,7 @@ int peripheral_request(unsigned short per, const char *label) */ #ifdef BF548_FAMILY - u16 funct = get_portmux(ident); - - if (!((per & P_MAYSHARE) && (funct == P_FUNCT2MUX(per)))) { + if (!((per & P_MAYSHARE) && get_portmux(per) == P_FUNCT2MUX(per))) { #else if (!(per & P_MAYSHARE)) { #endif @@ -931,11 +835,7 @@ int peripheral_request(unsigned short per, const char *label) anyway: reserved_peri_map[gpio_bank(ident)] |= gpio_bit(ident); -#ifdef BF548_FAMILY - portmux_setup(ident, P_FUNCT2MUX(per)); -#else - portmux_setup(per, P_FUNCT2MUX(per)); -#endif + portmux_setup(per); port_setup(ident, PERIPHERAL_USAGE); local_irq_restore_hw(flags); @@ -1163,8 +1063,16 @@ void bfin_gpio_irq_free(unsigned gpio) local_irq_restore_hw(flags); } - +static inline void __bfin_gpio_direction_input(unsigned gpio) +{ #ifdef BF548_FAMILY + gpio_array[gpio_bank(gpio)]->dir_clear = gpio_bit(gpio); +#else + gpio_array[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio); +#endif + gpio_array[gpio_bank(gpio)]->inen |= gpio_bit(gpio); +} + int bfin_gpio_direction_input(unsigned gpio) { unsigned long flags; @@ -1175,125 +1083,85 @@ int bfin_gpio_direction_input(unsigned gpio) } local_irq_save_hw(flags); - gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio); - gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio); + __bfin_gpio_direction_input(gpio); + AWA_DUMMY_READ(inen); local_irq_restore_hw(flags); return 0; } EXPORT_SYMBOL(bfin_gpio_direction_input); -int bfin_gpio_direction_output(unsigned gpio, int value) +void bfin_gpio_irq_prepare(unsigned gpio) { +#ifdef BF548_FAMILY unsigned long flags; +#endif - if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { - gpio_error(gpio); - return -EINVAL; - } + port_setup(gpio, GPIO_USAGE); +#ifdef BF548_FAMILY local_irq_save_hw(flags); - gpio_array[gpio_bank(gpio)]->port_inen &= ~gpio_bit(gpio); - gpio_set_value(gpio, value); - gpio_array[gpio_bank(gpio)]->port_dir_set = gpio_bit(gpio); + __bfin_gpio_direction_input(gpio); local_irq_restore_hw(flags); - - return 0; +#endif } -EXPORT_SYMBOL(bfin_gpio_direction_output); void bfin_gpio_set_value(unsigned gpio, int arg) { if (arg) - gpio_array[gpio_bank(gpio)]->port_set = gpio_bit(gpio); + gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio); else - gpio_array[gpio_bank(gpio)]->port_clear = gpio_bit(gpio); + gpio_array[gpio_bank(gpio)]->data_clear = gpio_bit(gpio); } EXPORT_SYMBOL(bfin_gpio_set_value); -int bfin_gpio_get_value(unsigned gpio) -{ - return (1 & (gpio_array[gpio_bank(gpio)]->port_data >> gpio_sub_n(gpio))); -} -EXPORT_SYMBOL(bfin_gpio_get_value); - -void bfin_gpio_irq_prepare(unsigned gpio) +int bfin_gpio_direction_output(unsigned gpio, int value) { unsigned long flags; - port_setup(gpio, GPIO_USAGE); + if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + gpio_error(gpio); + return -EINVAL; + } local_irq_save_hw(flags); - gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio); - gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio); - local_irq_restore_hw(flags); -} + gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio); + gpio_set_value(gpio, value); +#ifdef BF548_FAMILY + gpio_array[gpio_bank(gpio)]->dir_set = gpio_bit(gpio); #else + gpio_array[gpio_bank(gpio)]->dir |= gpio_bit(gpio); +#endif + + AWA_DUMMY_READ(dir); + local_irq_restore_hw(flags); + + return 0; +} +EXPORT_SYMBOL(bfin_gpio_direction_output); int bfin_gpio_get_value(unsigned gpio) { +#ifdef BF548_FAMILY + return (1 & (gpio_array[gpio_bank(gpio)]->data >> gpio_sub_n(gpio))); +#else unsigned long flags; - int ret; if (unlikely(get_gpio_edge(gpio))) { + int ret; local_irq_save_hw(flags); set_gpio_edge(gpio, 0); ret = get_gpio_data(gpio); set_gpio_edge(gpio, 1); local_irq_restore_hw(flags); - return ret; } else return get_gpio_data(gpio); +#endif } EXPORT_SYMBOL(bfin_gpio_get_value); - -int bfin_gpio_direction_input(unsigned gpio) -{ - unsigned long flags; - - if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { - gpio_error(gpio); - return -EINVAL; - } - - local_irq_save_hw(flags); - gpio_bankb[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio); - gpio_bankb[gpio_bank(gpio)]->inen |= gpio_bit(gpio); - AWA_DUMMY_READ(inen); - local_irq_restore_hw(flags); - - return 0; -} -EXPORT_SYMBOL(bfin_gpio_direction_input); - -int bfin_gpio_direction_output(unsigned gpio, int value) -{ - unsigned long flags; - - if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { - gpio_error(gpio); - return -EINVAL; - } - - local_irq_save_hw(flags); - gpio_bankb[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio); - - if (value) - gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio); - else - gpio_bankb[gpio_bank(gpio)]->data_clear = gpio_bit(gpio); - - gpio_bankb[gpio_bank(gpio)]->dir |= gpio_bit(gpio); - AWA_DUMMY_READ(dir); - local_irq_restore_hw(flags); - - return 0; -} -EXPORT_SYMBOL(bfin_gpio_direction_output); - /* If we are booting from SPI and our board lacks a strong enough pull up, * the core can reset and execute the bootrom faster than the resistor can * pull the signal logically high. To work around this (common) error in @@ -1309,18 +1177,11 @@ void bfin_gpio_reset_spi0_ssel1(void) u16 gpio = P_IDENT(P_SPI0_SSEL1); port_setup(gpio, GPIO_USAGE); - gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio); + gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio); AWA_DUMMY_READ(data_set); udelay(1); } -void bfin_gpio_irq_prepare(unsigned gpio) -{ - port_setup(gpio, GPIO_USAGE); -} - -#endif /*BF548_FAMILY */ - #if defined(CONFIG_PROC_FS) static int gpio_proc_read(char *buf, char **start, off_t offset, int len, int *unused_i, void *unused_v) @@ -1374,11 +1235,7 @@ int bfin_gpiolib_get_value(struct gpio_chip *chip, unsigned gpio) void bfin_gpiolib_set_value(struct gpio_chip *chip, unsigned gpio, int value) { -#ifdef BF548_FAMILY return bfin_gpio_set_value(gpio, value); -#else - return set_gpio_data(gpio, value); -#endif } int bfin_gpiolib_gpio_request(struct gpio_chip *chip, unsigned gpio) diff --git a/arch/blackfin/mach-bf548/include/mach/gpio.h b/arch/blackfin/mach-bf548/include/mach/gpio.h index bba82dc75f16..3a2051709787 100644 --- a/arch/blackfin/mach-bf548/include/mach/gpio.h +++ b/arch/blackfin/mach-bf548/include/mach/gpio.h @@ -195,17 +195,17 @@ struct gpio_port_t { unsigned short port_fer; unsigned short dummy1; - unsigned short port_data; + unsigned short data; unsigned short dummy2; - unsigned short port_set; + unsigned short data_set; unsigned short dummy3; - unsigned short port_clear; + unsigned short data_clear; unsigned short dummy4; - unsigned short port_dir_set; + unsigned short dir_set; unsigned short dummy5; - unsigned short port_dir_clear; + unsigned short dir_clear; unsigned short dummy6; - unsigned short port_inen; + unsigned short inen; unsigned short dummy7; unsigned int port_mux; }; -- cgit v1.2.2 From e48df47c1adabece6823395657ea6c677eb653db Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Wed, 4 Feb 2009 16:49:45 +0800 Subject: Blackfin arch: Fix URL Signed-off-by: Robin Getz Signed-off-by: Bryan Wu --- arch/blackfin/mach-common/interrupt.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S index 473df0f7fa78..43c4eb9acb65 100644 --- a/arch/blackfin/mach-common/interrupt.S +++ b/arch/blackfin/mach-common/interrupt.S @@ -195,7 +195,7 @@ ENDPROC(_evt_ivhw) /* Interrupt routine for evt2 (NMI). * We don't actually use this, so just return. * For inner circle type details, please see: - * http://docs.blackfin.uclinux.org/doku.php?id=linux:nmi + * http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:nmi */ ENTRY(_evt_nmi) .weak _evt_nmi -- cgit v1.2.2 From 0be58939146f28394a04b61fec7e0676cdafa47e Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Wed, 4 Feb 2009 16:49:45 +0800 Subject: Blackfin arch: Add a few more instructions that can cause the trace buffer to be discontiguous Signed-off-by: Robin Getz Signed-off-by: Bryan Wu --- arch/blackfin/kernel/traps.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 79926413c0eb..ffe7fb53eccb 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -673,6 +673,14 @@ static void decode_instruction(unsigned short *address) verbose_printk("RTI"); else if (opcode == 0x0012) verbose_printk("RTX"); + else if (opcode == 0x0013) + verbose_printk("RTN"); + else if (opcode == 0x0014) + verbose_printk("RTE"); + else if (opcode == 0x0025) + verbose_printk("EMUEXCPT"); + else if (opcode == 0x0040 && opcode <= 0x0047) + verbose_printk("STI R%i", opcode & 7); else if (opcode >= 0x0050 && opcode <= 0x0057) verbose_printk("JUMP (P%i)", opcode & 7); else if (opcode >= 0x0060 && opcode <= 0x0067) @@ -681,6 +689,10 @@ static void decode_instruction(unsigned short *address) verbose_printk("CALL (PC+P%i)", opcode & 7); else if (opcode >= 0x0080 && opcode <= 0x0087) verbose_printk("JUMP (PC+P%i)", opcode & 7); + else if (opcode >= 0x0090 && opcode <= 0x009F) + verbose_printk("RAISE 0x%x", opcode & 0xF); + else if (opcode >= 0x00A0 && opcode <= 0x00AF) + verbose_printk("EXCPT 0x%x", opcode & 0xF); else if ((opcode >= 0x1000 && opcode <= 0x13FF) || (opcode >= 0x1800 && opcode <= 0x1BFF)) verbose_printk("IF !CC JUMP"); else if ((opcode >= 0x1400 && opcode <= 0x17ff) || (opcode >= 0x1c00 && opcode <= 0x1fff)) -- cgit v1.2.2 From 3605fb09652beeb2e8244c52a9db5b76cc12295e Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Wed, 4 Feb 2009 16:49:45 +0800 Subject: Blackfin arch: Add ability to count and display number of NMI interrupts Signed-off-by: Robin Getz Signed-off-by: Bryan Wu --- arch/blackfin/include/asm/pda.h | 1 + arch/blackfin/kernel/irqchip.c | 8 +++++++- 2 files changed, 8 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/blackfin/include/asm/pda.h b/arch/blackfin/include/asm/pda.h index bd8d4a7efeb2..a67142740df0 100644 --- a/arch/blackfin/include/asm/pda.h +++ b/arch/blackfin/include/asm/pda.h @@ -59,6 +59,7 @@ struct blackfin_pda { /* Per-processor Data Area */ unsigned long icplb_fault_addr; unsigned long retx; unsigned long seqstat; + unsigned int __nmi_count; /* number of times NMI asserted on this CPU */ }; extern struct blackfin_pda cpu_pda[]; diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c index ab8209cbbad0..75724eee6494 100644 --- a/arch/blackfin/kernel/irqchip.c +++ b/arch/blackfin/kernel/irqchip.c @@ -35,6 +35,7 @@ #include #include #include +#include static atomic_t irq_err_count; static spinlock_t irq_controller_lock; @@ -91,8 +92,13 @@ int show_interrupts(struct seq_file *p, void *v) seq_putc(p, '\n'); skip: spin_unlock_irqrestore(&irq_desc[i].lock, flags); - } else if (i == NR_IRQS) + } else if (i == NR_IRQS) { + seq_printf(p, "NMI: "); + for_each_online_cpu(j) + seq_printf(p, "%10u ", cpu_pda[j].__nmi_count); + seq_printf(p, " CORE Non Maskable Interrupt\n"); seq_printf(p, "Err: %10u\n", atomic_read(&irq_err_count)); + } return 0; } -- cgit v1.2.2 From b52dae3139066765a7d96563e9cd33d9e60efe33 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Wed, 4 Feb 2009 16:49:45 +0800 Subject: Blackfin arch: Fix bug - Run "reboot" hangs bf518-ezbrd [Mike Frysinger : - setup P_DEFAULT_BOOT_SPI_CS for every arch based on the default bootrom behavior and convert all our boards to it - revert previous anomaly change ... bf51x is not affected by anomaly 05000353] Signed-off-by: Sonic Zhang Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/include/asm/reboot.h | 2 +- arch/blackfin/kernel/bfin_gpio.c | 5 ++--- arch/blackfin/mach-bf518/boards/ezbrd.c | 2 +- arch/blackfin/mach-bf518/include/mach/portmux.h | 2 ++ arch/blackfin/mach-bf527/boards/cm_bf527.c | 2 +- arch/blackfin/mach-bf527/boards/ezbrd.c | 2 +- arch/blackfin/mach-bf527/boards/ezkit.c | 2 +- arch/blackfin/mach-bf527/include/mach/portmux.h | 2 ++ arch/blackfin/mach-bf533/include/mach/portmux.h | 5 +---- arch/blackfin/mach-bf537/boards/generic_board.c | 2 +- arch/blackfin/mach-bf537/boards/minotaur.c | 2 +- arch/blackfin/mach-bf537/boards/stamp.c | 2 +- arch/blackfin/mach-bf537/include/mach/portmux.h | 1 + arch/blackfin/mach-bf538/include/mach/portmux.h | 1 + arch/blackfin/mach-bf548/include/mach/portmux.h | 1 + arch/blackfin/mach-bf561/include/mach/portmux.h | 1 + 16 files changed, 19 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/include/asm/reboot.h b/arch/blackfin/include/asm/reboot.h index 4856d62b7467..ae1e36329bec 100644 --- a/arch/blackfin/include/asm/reboot.h +++ b/arch/blackfin/include/asm/reboot.h @@ -15,6 +15,6 @@ extern void native_machine_halt(void); extern void native_machine_power_off(void); /* common reboot workarounds */ -extern void bfin_gpio_reset_spi0_ssel1(void); +extern void bfin_reset_boot_spi_cs(unsigned short pin); #endif diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index 7f69f43be987..44b6c9da6c35 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -1172,10 +1172,9 @@ EXPORT_SYMBOL(bfin_gpio_get_value); * lives here as we need to force all the GPIO states w/out going through * BUG() checks and such. */ -void bfin_gpio_reset_spi0_ssel1(void) +void bfin_reset_boot_spi_cs(unsigned short pin) { - u16 gpio = P_IDENT(P_SPI0_SSEL1); - + unsigned short gpio = P_IDENT(pin); port_setup(gpio, GPIO_USAGE); gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio); AWA_DUMMY_READ(data_set); diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c index 15f1351c8645..ee003f47a824 100644 --- a/arch/blackfin/mach-bf518/boards/ezbrd.c +++ b/arch/blackfin/mach-bf518/boards/ezbrd.c @@ -649,7 +649,7 @@ void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ if ((bfin_read_SYSCR() & 0x7) == 0x3) - bfin_gpio_reset_spi0_ssel1(); + bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); } void bfin_get_ether_addr(char *addr) diff --git a/arch/blackfin/mach-bf518/include/mach/portmux.h b/arch/blackfin/mach-bf518/include/mach/portmux.h index ac16d54734d4..f618b487b2b0 100644 --- a/arch/blackfin/mach-bf518/include/mach/portmux.h +++ b/arch/blackfin/mach-bf518/include/mach/portmux.h @@ -103,6 +103,8 @@ #define P_SPI1_SSEL4 (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(2)) #define P_SPI1_SSEL5 (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(2)) +#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2 + /* SPORT Port Mux */ #define P_SPORT0_DRPRI (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(0)) #define P_SPORT0_RSCLK (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(0)) diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c index a2c3578f4b6c..0281159b1c9b 100644 --- a/arch/blackfin/mach-bf527/boards/cm_bf527.c +++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c @@ -988,7 +988,7 @@ void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ if ((bfin_read_SYSCR() & 0x7) == 0x3) - bfin_gpio_reset_spi0_ssel1(); + bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); } void bfin_get_ether_addr(char *addr) diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c index 0314bd3355eb..521b25363815 100644 --- a/arch/blackfin/mach-bf527/boards/ezbrd.c +++ b/arch/blackfin/mach-bf527/boards/ezbrd.c @@ -784,7 +784,7 @@ void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ if ((bfin_read_SYSCR() & 0x7) == 0x3) - bfin_gpio_reset_spi0_ssel1(); + bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); } void bfin_get_ether_addr(char *addr) diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index 9454fb7b18c3..60fd9743ebc1 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -1068,7 +1068,7 @@ void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ if ((bfin_read_SYSCR() & 0x7) == 0x3) - bfin_gpio_reset_spi0_ssel1(); + bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); } void bfin_get_ether_addr(char *addr) diff --git a/arch/blackfin/mach-bf527/include/mach/portmux.h b/arch/blackfin/mach-bf527/include/mach/portmux.h index 7f6da2c386bb..72b1652be4da 100644 --- a/arch/blackfin/mach-bf527/include/mach/portmux.h +++ b/arch/blackfin/mach-bf527/include/mach/portmux.h @@ -73,6 +73,8 @@ #define P_HWAIT (P_DONTCARE) +#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1 + #define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0)) #define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(2)) #define P_SPI0_SCK (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(2)) diff --git a/arch/blackfin/mach-bf533/include/mach/portmux.h b/arch/blackfin/mach-bf533/include/mach/portmux.h index 685a2651dcda..2f59ce0b0cb5 100644 --- a/arch/blackfin/mach-bf533/include/mach/portmux.h +++ b/arch/blackfin/mach-bf533/include/mach/portmux.h @@ -54,14 +54,11 @@ #define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PF2)) #define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PF1)) #define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PF0)) +#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2 #define P_TMR2 (P_DONTCARE) #define P_TMR1 (P_DONTCARE) #define P_TMR0 (P_DONTCARE) #define P_TMRCLK (P_DEFINED | P_IDENT(GPIO_PF1)) - - - - #endif /* _MACH_PORTMUX_H_ */ diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c index dd6e6bfb98ea..d12ddf155102 100644 --- a/arch/blackfin/mach-bf537/boards/generic_board.c +++ b/arch/blackfin/mach-bf537/boards/generic_board.c @@ -726,7 +726,7 @@ void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ if ((bfin_read_SYSCR() & 0x7) == 0x3) - bfin_gpio_reset_spi0_ssel1(); + bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); } #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c index bb795341cb17..8f36d260aee2 100644 --- a/arch/blackfin/mach-bf537/boards/minotaur.c +++ b/arch/blackfin/mach-bf537/boards/minotaur.c @@ -377,5 +377,5 @@ void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ if ((bfin_read_SYSCR() & 0x7) == 0x3) - bfin_gpio_reset_spi0_ssel1(); + bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); } diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index d812e2514a2f..447d6d40361b 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -1307,7 +1307,7 @@ void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ if ((bfin_read_SYSCR() & 0x7) == 0x3) - bfin_gpio_reset_spi0_ssel1(); + bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); } /* diff --git a/arch/blackfin/mach-bf537/include/mach/portmux.h b/arch/blackfin/mach-bf537/include/mach/portmux.h index 78fee6e0f237..87285e75e903 100644 --- a/arch/blackfin/mach-bf537/include/mach/portmux.h +++ b/arch/blackfin/mach-bf537/include/mach/portmux.h @@ -31,6 +31,7 @@ #define P_PPI0_FS1 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1)) #define P_TACLK0 (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1)) #define P_TMRCLK (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1)) +#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1 #define P_PPI0_D0 (P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(0)) #define P_PPI0_D1 (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0)) diff --git a/arch/blackfin/mach-bf538/include/mach/portmux.h b/arch/blackfin/mach-bf538/include/mach/portmux.h index 1e031b588b47..c8db264e3e4d 100644 --- a/arch/blackfin/mach-bf538/include/mach/portmux.h +++ b/arch/blackfin/mach-bf538/include/mach/portmux.h @@ -102,5 +102,6 @@ #define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PF2)) #define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PF1)) #define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PF0)) +#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2 #endif /* _MACH_PORTMUX_H_ */ diff --git a/arch/blackfin/mach-bf548/include/mach/portmux.h b/arch/blackfin/mach-bf548/include/mach/portmux.h index 8177a567dcdb..ffb1d0a44b4d 100644 --- a/arch/blackfin/mach-bf548/include/mach/portmux.h +++ b/arch/blackfin/mach-bf548/include/mach/portmux.h @@ -125,6 +125,7 @@ #define P_KEY_COL2 (P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(3)) #define P_KEY_COL3 (P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(3)) +#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1 #define P_SPI0_SCK (P_DEFINED | P_IDENT(GPIO_PE0) | P_FUNCT(0)) #define P_SPI0_MISO (P_DEFINED | P_IDENT(GPIO_PE1) | P_FUNCT(0)) #define P_SPI0_MOSI (P_DEFINED | P_IDENT(GPIO_PE2) | P_FUNCT(0)) diff --git a/arch/blackfin/mach-bf561/include/mach/portmux.h b/arch/blackfin/mach-bf561/include/mach/portmux.h index a6ee8206efb6..2e5ad6347dea 100644 --- a/arch/blackfin/mach-bf561/include/mach/portmux.h +++ b/arch/blackfin/mach-bf561/include/mach/portmux.h @@ -85,5 +85,6 @@ #define P_SPI0_MOSI (P_DONTCARE) #define P_SPI0_MISO (P_DONTCARE) #define P_SPI0_SCK (P_DONTCARE) +#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2 #endif /* _MACH_PORTMUX_H_ */ -- cgit v1.2.2 From 047481f348668340fab7164b12be130ca2ad2522 Mon Sep 17 00:00:00 2001 From: Grace Pan Date: Wed, 4 Feb 2009 16:49:45 +0800 Subject: Blackfin arch: Add in cflag to support mlong-calls for kgdb_test Signed-off-by: Grace Pan Signed-off-by: Bryan Wu --- arch/blackfin/kernel/Makefile | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile index 38a233374f07..4a92a86824b7 100644 --- a/arch/blackfin/kernel/Makefile +++ b/arch/blackfin/kernel/Makefile @@ -15,6 +15,8 @@ else obj-y += time.o endif +CFLAGS_kgdb_test.o := -mlong-calls -O0 + obj-$(CONFIG_IPIPE) += ipipe.o obj-$(CONFIG_IPIPE_TRACE_MCOUNT) += mcount.o obj-$(CONFIG_BFIN_GPTIMERS) += gptimers.o -- cgit v1.2.2 From 0ce5eaf8ec156926a29313de877d9d5e0a692054 Mon Sep 17 00:00:00 2001 From: Graf Yang Date: Wed, 4 Feb 2009 16:49:45 +0800 Subject: Blackfin arch: Fix bug - BF518 port F, G, and H have different mux offset compare to BF527 [Mike Frysinger : keep the ifdef nest down] Signed-off-by: Graf Yang Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/kernel/bfin_gpio.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index 44b6c9da6c35..51dac55c524a 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -108,12 +108,19 @@ static unsigned short * const port_mux[] = { }; static const -u8 pmux_offset[][16] = - {{ 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 4, 6, 8, 8, 10, 10 }, /* PORTF */ - { 0, 0, 0, 0, 0, 2, 2, 4, 4, 6, 8, 10, 10, 10, 12, 12 }, /* PORTG */ - { 0, 0, 0, 0, 0, 0, 0, 0, 2, 4, 4, 4, 4, 4, 4, 4 }, /* PORTH */ - }; +u8 pmux_offset[][16] = { +# if defined(BF527_FAMILY) + { 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 4, 6, 8, 8, 10, 10 }, /* PORTF */ + { 0, 0, 0, 0, 0, 2, 2, 4, 4, 6, 8, 10, 10, 10, 12, 12 }, /* PORTG */ + { 0, 0, 0, 0, 0, 0, 0, 0, 2, 4, 4, 4, 4, 4, 4, 4 }, /* PORTH */ +# elif defined(BF518_FAMILY) + { 0, 2, 2, 2, 2, 2, 2, 4, 6, 6, 6, 8, 8, 8, 8, 10 }, /* PORTF */ + { 0, 0, 0, 2, 4, 6, 6, 6, 8, 10, 10, 12, 14, 14, 14, 14 }, /* PORTG */ + { 0, 0, 0, 0, 2, 2, 4, 6, 10, 10, 10, 10, 10, 10, 10, 10 }, /* PORTH */ +# endif +}; # endif + #endif static unsigned short reserved_gpio_map[GPIO_BANK_NUM]; -- cgit v1.2.2 From aa9c33b496ca9434f26beaa1b447a6e2e5d8ad6a Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Wed, 4 Feb 2009 16:49:45 +0800 Subject: Blackfin arch: Faster Implementation of csum_tcpudp_nofold() Avoid conditional branch instructions during carry bit additions. Special thanks to Bernd. Simplify: Use ((len + proto) << 8) like every other __LITTLE_ENDIAN__ machine Cc: Bernd Schmidt Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/include/asm/checksum.h | 34 +++++++++++++++++----------------- 1 file changed, 17 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/include/asm/checksum.h b/arch/blackfin/include/asm/checksum.h index f67289a0d8d2..793581fc9556 100644 --- a/arch/blackfin/include/asm/checksum.h +++ b/arch/blackfin/include/asm/checksum.h @@ -63,23 +63,23 @@ static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, unsigned short proto, __wsum sum) { - - __asm__ ("%0 = %0 + %1;\n\t" - "CC = AC0;\n\t" - "if !CC jump 4;\n\t" - "%0 = %0 + %4;\n\t" - "%0 = %0 + %2;\n\t" - "CC = AC0;\n\t" - "if !CC jump 4;\n\t" - "%0 = %0 + %4;\n\t" - "%0 = %0 + %3;\n\t" - "CC = AC0;\n\t" - "if !CC jump 4;\n\t" - "%0 = %0 + %4;\n\t" - "NOP;\n\t" - : "=d" (sum) - : "d" (daddr), "d" (saddr), "d" ((ntohs(len)<<16)+proto*256), "d" (1), "0"(sum) - : "CC"); + unsigned int carry; + + __asm__ ("%0 = %0 + %2;\n\t" + "CC = AC0;\n\t" + "%1 = CC;\n\t" + "%0 = %0 + %1;\n\t" + "%0 = %0 + %3;\n\t" + "CC = AC0;\n\t" + "%1 = CC;\n\t" + "%0 = %0 + %1;\n\t" + "%0 = %0 + %4;\n\t" + "CC = AC0;\n\t" + "%1 = CC;\n\t" + "%0 = %0 + %1;\n\t" + : "=d" (sum), "=&d" (carry) + : "d" (daddr), "d" (saddr), "d" ((len + proto) << 8), "0"(sum) + : "CC"); return (sum); } -- cgit v1.2.2 From adab7eb883a0b0fb7f13b1d7b30b596139f6f40d Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 4 Feb 2009 16:49:45 +0800 Subject: Blackfin arch: sync reboot handler with version in u-boot Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/kernel/reboot.c | 26 +++++++++++++++----------- 1 file changed, 15 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/reboot.c b/arch/blackfin/kernel/reboot.c index eeee8cb43360..f7ca5789cccf 100644 --- a/arch/blackfin/kernel/reboot.c +++ b/arch/blackfin/kernel/reboot.c @@ -20,7 +20,7 @@ * reset while the Core B bit (on dual core parts) is cleared by * the core reset. */ -__attribute__((l1_text)) +__attribute__ ((__l1_text__, __noreturn__)) static void _bfin_reset(void) { /* Wait for completion of "system" events such as cache line @@ -30,7 +30,11 @@ static void _bfin_reset(void) */ __builtin_bfin_ssync(); - while (1) { + /* The bootrom checks to see how it was reset and will + * automatically perform a software reset for us when + * it starts executing after the core reset. + */ + if (ANOMALY_05000353 || ANOMALY_05000386) { /* Initiate System software reset. */ bfin_write_SWRST(0x7); @@ -50,6 +54,11 @@ static void _bfin_reset(void) /* Clear System software reset */ bfin_write_SWRST(0); + /* The BF526 ROM will crash during reset */ +#if defined(__ADSPBF522__) || defined(__ADSPBF524__) || defined(__ADSPBF526__) + bfin_read_SWRST(); +#endif + /* Wait for the SWRST write to complete. Cannot rely on SSYNC * though as the System state is all reset now. */ @@ -60,22 +69,17 @@ static void _bfin_reset(void) : "a" (15 * 1) : "LC1", "LB1", "LT1" ); + } + while (1) /* Issue core reset */ asm("raise 1"); - } } +__attribute__ ((__noreturn__)) static void bfin_reset(void) { - if (ANOMALY_05000353 || ANOMALY_05000386) - _bfin_reset(); - else - /* the bootrom checks to see how it was reset and will - * automatically perform a software reset for us when - * it starts executing boot - */ - asm("raise 1;"); + _bfin_reset(); } __attribute__((weak)) -- cgit v1.2.2 From a6595bf04b9cc9a4997e6d849b62d69439dd1eff Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 4 Feb 2009 16:49:45 +0800 Subject: Blackfin arch: bfin_reset->_bfin_reset redirection no longer needed Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/kernel/reboot.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/reboot.c b/arch/blackfin/kernel/reboot.c index f7ca5789cccf..53d08dee8531 100644 --- a/arch/blackfin/kernel/reboot.c +++ b/arch/blackfin/kernel/reboot.c @@ -21,7 +21,7 @@ * the core reset. */ __attribute__ ((__l1_text__, __noreturn__)) -static void _bfin_reset(void) +static void bfin_reset(void) { /* Wait for completion of "system" events such as cache line * line fills so that we avoid infinite stalls later on as @@ -76,12 +76,6 @@ static void _bfin_reset(void) asm("raise 1"); } -__attribute__ ((__noreturn__)) -static void bfin_reset(void) -{ - _bfin_reset(); -} - __attribute__((weak)) void native_machine_restart(char *cmd) { -- cgit v1.2.2 From 2678479c33774f297ea2a5d232cad11c4d56ef6c Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 4 Feb 2009 16:49:45 +0800 Subject: Blackfin arch: drop CONFIG_I2C_BOARDINFO ifdefs Drop CONFIG_I2C_BOARDINFO ifdefs as the common i2c header handles this already by stubbing things out Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf518/boards/ezbrd.c | 6 ------ arch/blackfin/mach-bf527/boards/cm_bf527.c | 6 ------ arch/blackfin/mach-bf527/boards/ezbrd.c | 6 ------ arch/blackfin/mach-bf527/boards/ezkit.c | 6 ------ arch/blackfin/mach-bf533/boards/blackstamp.c | 4 ---- arch/blackfin/mach-bf533/boards/stamp.c | 4 ---- arch/blackfin/mach-bf537/boards/stamp.c | 6 ------ arch/blackfin/mach-bf548/boards/ezkit.c | 4 ---- 8 files changed, 42 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c index ee003f47a824..b23108bcbf59 100644 --- a/arch/blackfin/mach-bf518/boards/ezbrd.c +++ b/arch/blackfin/mach-bf518/boards/ezbrd.c @@ -473,7 +473,6 @@ static struct platform_device i2c_bfin_twi_device = { }; #endif -#ifdef CONFIG_I2C_BOARDINFO static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) { @@ -487,7 +486,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }, #endif }; -#endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) static struct platform_device bfin_sport0_uart_device = { @@ -632,12 +630,8 @@ static struct platform_device *stamp_devices[] __initdata = { static int __init ezbrd_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); - -#ifdef CONFIG_I2C_BOARDINFO i2c_register_board_info(0, bfin_i2c_board_info, ARRAY_SIZE(bfin_i2c_board_info)); -#endif - platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); return 0; diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c index 0281159b1c9b..638cfcddbae8 100644 --- a/arch/blackfin/mach-bf527/boards/cm_bf527.c +++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c @@ -793,7 +793,6 @@ static struct platform_device i2c_bfin_twi_device = { }; #endif -#ifdef CONFIG_I2C_BOARDINFO static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) { @@ -809,7 +808,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }, #endif }; -#endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) static struct platform_device bfin_sport0_uart_device = { @@ -971,12 +969,8 @@ static struct platform_device *stamp_devices[] __initdata = { static int __init stamp_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); - -#ifdef CONFIG_I2C_BOARDINFO i2c_register_board_info(0, bfin_i2c_board_info, ARRAY_SIZE(bfin_i2c_board_info)); -#endif - platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); return 0; diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c index 521b25363815..f2b7a5482017 100644 --- a/arch/blackfin/mach-bf527/boards/ezbrd.c +++ b/arch/blackfin/mach-bf527/boards/ezbrd.c @@ -590,7 +590,6 @@ static struct platform_device i2c_bfin_twi_device = { }; #endif -#ifdef CONFIG_I2C_BOARDINFO static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) { @@ -604,7 +603,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }, #endif }; -#endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) static struct platform_device bfin_sport0_uart_device = { @@ -767,12 +765,8 @@ static struct platform_device *stamp_devices[] __initdata = { static int __init stamp_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); - -#ifdef CONFIG_I2C_BOARDINFO i2c_register_board_info(0, bfin_i2c_board_info, ARRAY_SIZE(bfin_i2c_board_info)); -#endif - platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); return 0; diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index 60fd9743ebc1..dc9bdb9cd752 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -830,7 +830,6 @@ static struct platform_device i2c_bfin_twi_device = { }; #endif -#ifdef CONFIG_I2C_BOARDINFO static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) { @@ -844,7 +843,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }, #endif }; -#endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) static struct platform_device bfin_sport0_uart_device = { @@ -1051,12 +1049,8 @@ static struct platform_device *stamp_devices[] __initdata = { static int __init stamp_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); - -#ifdef CONFIG_I2C_BOARDINFO i2c_register_board_info(0, bfin_i2c_board_info, ARRAY_SIZE(bfin_i2c_board_info)); -#endif - platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); return 0; diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c index 6ee607c259ac..015c18f85e7f 100644 --- a/arch/blackfin/mach-bf533/boards/blackstamp.c +++ b/arch/blackfin/mach-bf533/boards/blackstamp.c @@ -309,10 +309,8 @@ static struct platform_device i2c_gpio_device = { }; #endif -#ifdef CONFIG_I2C_BOARDINFO static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }; -#endif static const unsigned int cclk_vlev_datasheet[] = { @@ -390,10 +388,8 @@ static int __init blackstamp_init(void) printk(KERN_INFO "%s(): registering device resources\n", __func__); -#ifdef CONFIG_I2C_BOARDINFO i2c_register_board_info(0, bfin_i2c_board_info, ARRAY_SIZE(bfin_i2c_board_info)); -#endif ret = platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); if (ret < 0) diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index 07f9ad1e189c..db96f33f72e2 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -441,7 +441,6 @@ static struct platform_device i2c_gpio_device = { }; #endif -#ifdef CONFIG_I2C_BOARDINFO static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE) { @@ -461,7 +460,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }, #endif }; -#endif static const unsigned int cclk_vlev_datasheet[] = { @@ -550,10 +548,8 @@ static int __init stamp_init(void) printk(KERN_INFO "%s(): registering device resources\n", __func__); -#ifdef CONFIG_I2C_BOARDINFO i2c_register_board_info(0, bfin_i2c_board_info, ARRAY_SIZE(bfin_i2c_board_info)); -#endif ret = platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); if (ret < 0) diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 447d6d40361b..2300ed4ec601 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -1068,7 +1068,6 @@ static struct adp5588_kpad_platform_data adp5588_kpad_data = { }; #endif -#ifdef CONFIG_I2C_BOARDINFO static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE) { @@ -1102,7 +1101,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }, #endif }; -#endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) static struct platform_device bfin_sport0_uart_device = { @@ -1284,12 +1282,8 @@ static struct platform_device *stamp_devices[] __initdata = { static int __init stamp_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); - -#ifdef CONFIG_I2C_BOARDINFO i2c_register_board_info(0, bfin_i2c_board_info, ARRAY_SIZE(bfin_i2c_board_info)); -#endif - bfin_plat_nand_init(); platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 309c16014cae..096e661700a7 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -781,7 +781,6 @@ static struct platform_device i2c_bfin_twi1_device = { #endif #endif -#ifdef CONFIG_I2C_BOARDINFO static struct i2c_board_info __initdata bfin_i2c_board_info0[] = { }; @@ -800,7 +799,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info1[] = { #endif }; #endif -#endif #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include @@ -956,13 +954,11 @@ static int __init ezkit_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); -#ifdef CONFIG_I2C_BOARDINFO i2c_register_board_info(0, bfin_i2c_board_info0, ARRAY_SIZE(bfin_i2c_board_info0)); #if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */ i2c_register_board_info(1, bfin_i2c_board_info1, ARRAY_SIZE(bfin_i2c_board_info1)); -#endif #endif platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); -- cgit v1.2.2 From 7f6678c52fea7ff3e7eb6a5f0e0b705c1991eaa2 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 4 Feb 2009 16:49:45 +0800 Subject: Blackfin arch: fixup board init function name Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf527/boards/cm_bf527.c | 4 ++-- arch/blackfin/mach-bf527/boards/ezbrd.c | 4 ++-- arch/blackfin/mach-bf527/boards/ezkit.c | 4 ++-- arch/blackfin/mach-bf537/boards/generic_board.c | 4 ++-- arch/blackfin/mach-bf537/boards/pnav10.c | 4 ++-- arch/blackfin/mach-bf537/boards/tcm_bf537.c | 4 ++-- 6 files changed, 12 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c index 638cfcddbae8..98ab8bc28304 100644 --- a/arch/blackfin/mach-bf527/boards/cm_bf527.c +++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c @@ -966,7 +966,7 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_gpios_device, }; -static int __init stamp_init(void) +static int __init cm_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); i2c_register_board_info(0, bfin_i2c_board_info, @@ -976,7 +976,7 @@ static int __init stamp_init(void) return 0; } -arch_initcall(stamp_init); +arch_initcall(cm_init); void native_machine_restart(char *cmd) { diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c index f2b7a5482017..d0f29870f1a4 100644 --- a/arch/blackfin/mach-bf527/boards/ezbrd.c +++ b/arch/blackfin/mach-bf527/boards/ezbrd.c @@ -762,7 +762,7 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_gpios_device, }; -static int __init stamp_init(void) +static int __init ezbrd_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); i2c_register_board_info(0, bfin_i2c_board_info, @@ -772,7 +772,7 @@ static int __init stamp_init(void) return 0; } -arch_initcall(stamp_init); +arch_initcall(ezbrd_init); void native_machine_restart(char *cmd) { diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index dc9bdb9cd752..1f7a249d6926 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -1046,7 +1046,7 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_gpios_device, }; -static int __init stamp_init(void) +static int __init ezkit_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); i2c_register_board_info(0, bfin_i2c_board_info, @@ -1056,7 +1056,7 @@ static int __init stamp_init(void) return 0; } -arch_initcall(stamp_init); +arch_initcall(ezkit_init); void native_machine_restart(char *cmd) { diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c index d12ddf155102..fb0368ec2aff 100644 --- a/arch/blackfin/mach-bf537/boards/generic_board.c +++ b/arch/blackfin/mach-bf537/boards/generic_board.c @@ -708,7 +708,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif }; -static int __init stamp_init(void) +static int __init generic_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); @@ -720,7 +720,7 @@ static int __init stamp_init(void) return 0; } -arch_initcall(stamp_init); +arch_initcall(generic_init); void native_machine_restart(char *cmd) { diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c index 89de94f4545d..8835c58cfaec 100644 --- a/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/arch/blackfin/mach-bf537/boards/pnav10.c @@ -558,7 +558,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif }; -static int __init stamp_init(void) +static int __init pnav_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); @@ -569,7 +569,7 @@ static int __init stamp_init(void) return 0; } -arch_initcall(stamp_init); +arch_initcall(pnav_init); void bfin_get_ether_addr(char *addr) { diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c index 2f4b066153c5..2e60bbad73ee 100644 --- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c @@ -615,7 +615,7 @@ static struct platform_device *cm_bf537_devices[] __initdata = { &bfin_gpios_device, }; -static int __init cm_bf537_init(void) +static int __init tcm_bf537_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices)); @@ -629,7 +629,7 @@ static int __init cm_bf537_init(void) return 0; } -arch_initcall(cm_bf537_init); +arch_initcall(tcm_bf537_init); void bfin_get_ether_addr(char *addr) { -- cgit v1.2.2 From ed1fb6048c3eef68df5fe19e9022fdad6e53357d Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 4 Feb 2009 16:49:45 +0800 Subject: Blackfin arch: read SYSCR on newer parts that mirror the bits of SWRST in it Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/kernel/setup.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index a23fec573c0a..86feb4274218 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -826,7 +826,13 @@ void __init setup_arch(char **cmdline_p) printk(KERN_INFO "Boot Mode: %i\n", bfin_read_SYSCR() & 0xF); + /* Newer parts mirror SWRST bits in SYSCR */ +#if defined(CONFIG_BF53x) || defined(CONFIG_BF561) || \ + defined(CONFIG_BF538) || defined(CONFIG_BF539) _bfin_swrst = bfin_read_SWRST(); +#else + _bfin_swrst = bfin_read_SYSCR(); +#endif #ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT bfin_write_SWRST(_bfin_swrst & ~DOUBLE_FAULT); -- cgit v1.2.2 From be1d8543a82d3a8f466509bbd355a5861193135f Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 4 Feb 2009 16:49:45 +0800 Subject: Blackfin arch: base SIC_IWR# programming on whether the MMR exists base SIC_IWR# programming on whether the MMR exists rather than having to maintain another list of processors Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/mach-common/ints-priority.c | 11 ++++------- arch/blackfin/mach-common/pm.c | 11 ++++------- 2 files changed, 8 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c index 1bba6030dce9..202494568c6c 100644 --- a/arch/blackfin/mach-common/ints-priority.c +++ b/arch/blackfin/mach-common/ints-priority.c @@ -1101,10 +1101,9 @@ int __init init_arch_irq(void) IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 | IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW; -#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) \ - || defined(BF538_FAMILY) || defined(CONFIG_BF51x) +#ifdef SIC_IWR0 bfin_write_SIC_IWR0(IWR_DISABLE_ALL); -#if defined(CONFIG_BF52x) || defined(CONFIG_BF51x) +# ifdef SIC_IWR1 /* BF52x/BF51x system reset does not properly reset SIC_IWR1 which * will screw up the bootrom as it relies on MDMA0/1 waking it * up from IDLE instructions. See this report for more info: @@ -1114,10 +1113,8 @@ int __init init_arch_irq(void) bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11)); else bfin_write_SIC_IWR1(IWR_DISABLE_ALL); -#else - bfin_write_SIC_IWR1(IWR_DISABLE_ALL); -#endif -# ifdef CONFIG_BF54x +# endif +# ifdef SIC_IWR2 bfin_write_SIC_IWR2(IWR_DISABLE_ALL); # endif #else diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c index d3d70fd67c16..f48a6aebb49b 100644 --- a/arch/blackfin/mach-common/pm.c +++ b/arch/blackfin/mach-common/pm.c @@ -82,10 +82,9 @@ void bfin_pm_suspend_standby_enter(void) bfin_pm_standby_restore(); -#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) || \ - defined(CONFIG_BF538) || defined(CONFIG_BF539) || defined(CONFIG_BF51x) +#ifdef SIC_IWR0 bfin_write_SIC_IWR0(IWR_DISABLE_ALL); -#if defined(CONFIG_BF52x) || defined(CONFIG_BF51x) +# ifdef SIC_IWR1 /* BF52x system reset does not properly reset SIC_IWR1 which * will screw up the bootrom as it relies on MDMA0/1 waking it * up from IDLE instructions. See this report for more info: @@ -95,10 +94,8 @@ void bfin_pm_suspend_standby_enter(void) bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11)); else bfin_write_SIC_IWR1(IWR_DISABLE_ALL); -#else - bfin_write_SIC_IWR1(IWR_DISABLE_ALL); -#endif -# ifdef CONFIG_BF54x +# endif +# ifdef SIC_IWR2 bfin_write_SIC_IWR2(IWR_DISABLE_ALL); # endif #else -- cgit v1.2.2 From 9960aa6a07bc41223a3bf2df1dfd284698486eb0 Mon Sep 17 00:00:00 2001 From: Graf Yang Date: Wed, 4 Feb 2009 16:49:45 +0800 Subject: Blackfin arch: Fix bug - 561 SMP kernel can't boot from jffs2 bss_l2 section is garbage when the data in this section is used by _bfin_relocate_l1_mem, so move the zero out function ahead. Signed-off-by: Graf Yang Signed-off-by: Bryan Wu --- arch/blackfin/mach-common/head.S | 84 ++++++++++++++++++++-------------------- 1 file changed, 42 insertions(+), 42 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/mach-common/head.S b/arch/blackfin/mach-common/head.S index e1e42c029e15..698d4c05947e 100644 --- a/arch/blackfin/mach-common/head.S +++ b/arch/blackfin/mach-common/head.S @@ -17,6 +17,19 @@ __INIT +ENTRY(__init_clear_bss) + r2 = r2 - r1; + cc = r2 == 0; + if cc jump .L_bss_done; + r2 >>= 2; + p1 = r1; + p2 = r2; + lsetup (1f, 1f) lc0 = p2; +1: [p1++] = r0; +.L_bss_done: + rts; +ENDPROC(__init_clear_bss) + #define INITIAL_STACK (L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12) ENTRY(__start) @@ -144,6 +157,35 @@ ENTRY(__start) call _init_early_exception_vectors; #endif + r0 = 0 (x); + /* Zero out all of the fun bss regions */ +#if L1_DATA_A_LENGTH > 0 + r1.l = __sbss_l1; + r1.h = __sbss_l1; + r2.l = __ebss_l1; + r2.h = __ebss_l1; + call __init_clear_bss +#endif +#if L1_DATA_B_LENGTH > 0 + r1.l = __sbss_b_l1; + r1.h = __sbss_b_l1; + r2.l = __ebss_b_l1; + r2.h = __ebss_b_l1; + call __init_clear_bss +#endif +#if L2_LENGTH > 0 + r1.l = __sbss_l2; + r1.h = __sbss_l2; + r2.l = __ebss_l2; + r2.h = __ebss_l2; + call __init_clear_bss +#endif + r1.l = ___bss_start; + r1.h = ___bss_start; + r2.l = ___bss_stop; + r2.h = ___bss_stop; + call __init_clear_bss + /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ call _bfin_relocate_l1_mem; #ifdef CONFIG_BFIN_KERNEL_CLOCK @@ -185,19 +227,6 @@ ENDPROC(__start) # define WDOG_CTL WDOGA_CTL #endif -ENTRY(__init_clear_bss) - r2 = r2 - r1; - cc = r2 == 0; - if cc jump .L_bss_done; - r2 >>= 2; - p1 = r1; - p2 = r2; - lsetup (1f, 1f) lc0 = p2; -1: [p1++] = r0; -.L_bss_done: - rts; -ENDPROC(__init_clear_bss) - ENTRY(_real_start) /* Enable nested interrupts */ [--sp] = reti; @@ -209,35 +238,6 @@ ENTRY(_real_start) w[p0] = r0; ssync; - r0 = 0 (x); - /* Zero out all of the fun bss regions */ -#if L1_DATA_A_LENGTH > 0 - r1.l = __sbss_l1; - r1.h = __sbss_l1; - r2.l = __ebss_l1; - r2.h = __ebss_l1; - call __init_clear_bss -#endif -#if L1_DATA_B_LENGTH > 0 - r1.l = __sbss_b_l1; - r1.h = __sbss_b_l1; - r2.l = __ebss_b_l1; - r2.h = __ebss_b_l1; - call __init_clear_bss -#endif -#if L2_LENGTH > 0 - r1.l = __sbss_l2; - r1.h = __sbss_l2; - r2.l = __ebss_l2; - r2.h = __ebss_l2; - call __init_clear_bss -#endif - r1.l = ___bss_start; - r1.h = ___bss_start; - r2.l = ___bss_stop; - r2.h = ___bss_stop; - call __init_clear_bss - /* Pass the u-boot arguments to the global value command line */ R0 = R7; call _cmdline_init; -- cgit v1.2.2 From 1c302b6ccb1296bda3754708099233290f6cf689 Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Wed, 4 Feb 2009 16:49:45 +0800 Subject: Blackfin arch: Add ANOMALY_05000380 to BF54x to kill the compile warning Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf548/include/mach/anomaly.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h index 3b5430999f4f..23d03c52f4b4 100644 --- a/arch/blackfin/mach-bf548/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h @@ -175,6 +175,7 @@ #define ANOMALY_05000311 (0) #define ANOMALY_05000323 (0) #define ANOMALY_05000363 (0) +#define ANOMALY_05000380 (0) #define ANOMALY_05000412 (0) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) -- cgit v1.2.2 From 3aee91bafef01bd5c59853346f1fcb85f701fdc1 Mon Sep 17 00:00:00 2001 From: Jie Zhang Date: Wed, 4 Feb 2009 16:49:45 +0800 Subject: Blackfin arch: fix 2 bugs related to debug - unable to single step over emuexcpt instruction - gdbproxy goes into infinite loop when doing gdb does "next" over "emuexcpt" Don't decrement PC after software breakpoint. Signed-off-by: Jie Zhang Signed-off-by: Bryan Wu --- arch/blackfin/mach-common/entry.S | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index fae774651374..88de053bbe8e 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -151,13 +151,6 @@ ENTRY(_ex_syscall) jump.s _bfin_return_from_exception; ENDPROC(_ex_syscall) -ENTRY(_ex_soft_bp) - r7 = retx; - r7 += -2; - retx = r7; - jump.s _ex_trap_c; -ENDPROC(_ex_soft_bp) - ENTRY(_ex_single_step) /* If we just returned from an interrupt, the single step event is for the RTI instruction. */ @@ -1087,7 +1080,7 @@ ENTRY(_ex_table) * EXCPT instruction can provide 4 bits of EXCAUSE, allowing 16 to be user defined */ .long _ex_syscall /* 0x00 - User Defined - Linux Syscall */ - .long _ex_soft_bp /* 0x01 - User Defined - Software breakpoint */ + .long _ex_trap_c /* 0x01 - User Defined - Software breakpoint */ #ifdef CONFIG_KGDB .long _ex_trap_c /* 0x02 - User Defined - KGDB initial connection and break signal trap */ -- cgit v1.2.2 From 583947c6bc397854a3a57d45539654c9d8223966 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 4 Feb 2009 16:49:45 +0800 Subject: Blackfin arch: build jtag tty driver as a module by default Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/configs/BF518F-EZBRD_defconfig | 2 +- arch/blackfin/configs/BF526-EZBRD_defconfig | 2 +- arch/blackfin/configs/BF527-EZKIT_defconfig | 2 +- arch/blackfin/configs/BF533-EZKIT_defconfig | 2 +- arch/blackfin/configs/BF533-STAMP_defconfig | 2 +- arch/blackfin/configs/BF537-STAMP_defconfig | 2 +- arch/blackfin/configs/BF538-EZKIT_defconfig | 2 +- arch/blackfin/configs/BF548-EZKIT_defconfig | 2 +- arch/blackfin/configs/BF561-EZKIT_defconfig | 2 +- 9 files changed, 9 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig index 18e9784376f2..4fdb9e04759f 100644 --- a/arch/blackfin/configs/BF518F-EZBRD_defconfig +++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig @@ -684,7 +684,7 @@ CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_DEVKMEM is not set -# CONFIG_BFIN_JTAG_COMM is not set +CONFIG_BFIN_JTAG_COMM=m # CONFIG_SERIAL_NONSTANDARD is not set # diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig index 992424ff3153..8e2b855b8db7 100644 --- a/arch/blackfin/configs/BF526-EZBRD_defconfig +++ b/arch/blackfin/configs/BF526-EZBRD_defconfig @@ -723,7 +723,7 @@ CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_DEVKMEM is not set -# CONFIG_BFIN_JTAG_COMM is not set +CONFIG_BFIN_JTAG_COMM=m # CONFIG_SERIAL_NONSTANDARD is not set # diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig index 21e3c1af55ba..833128b39724 100644 --- a/arch/blackfin/configs/BF527-EZKIT_defconfig +++ b/arch/blackfin/configs/BF527-EZKIT_defconfig @@ -767,7 +767,7 @@ CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_DEVKMEM is not set -# CONFIG_BFIN_JTAG_COMM is not set +CONFIG_BFIN_JTAG_COMM=m # CONFIG_SERIAL_NONSTANDARD is not set # diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig index 0bdf20a1af61..334c94b51c40 100644 --- a/arch/blackfin/configs/BF533-EZKIT_defconfig +++ b/arch/blackfin/configs/BF533-EZKIT_defconfig @@ -672,7 +672,7 @@ CONFIG_BFIN_DMA_INTERFACE=m CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_DEVKMEM is not set -# CONFIG_BFIN_JTAG_COMM is not set +CONFIG_BFIN_JTAG_COMM=m # CONFIG_SERIAL_NONSTANDARD is not set # diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig index 2f747d6e97e2..9d733436e300 100644 --- a/arch/blackfin/configs/BF533-STAMP_defconfig +++ b/arch/blackfin/configs/BF533-STAMP_defconfig @@ -679,7 +679,7 @@ CONFIG_BFIN_DMA_INTERFACE=m CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_DEVKMEM is not set -# CONFIG_BFIN_JTAG_COMM is not set +CONFIG_BFIN_JTAG_COMM=m # CONFIG_SERIAL_NONSTANDARD is not set # diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig index 8b0a81294e65..4fb4108d3103 100644 --- a/arch/blackfin/configs/BF537-STAMP_defconfig +++ b/arch/blackfin/configs/BF537-STAMP_defconfig @@ -722,7 +722,7 @@ CONFIG_BFIN_DMA_INTERFACE=m CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_DEVKMEM is not set -# CONFIG_BFIN_JTAG_COMM is not set +CONFIG_BFIN_JTAG_COMM=m # CONFIG_SERIAL_NONSTANDARD is not set # diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig index a1f766bf7d9b..cb32f5624a1b 100644 --- a/arch/blackfin/configs/BF538-EZKIT_defconfig +++ b/arch/blackfin/configs/BF538-EZKIT_defconfig @@ -726,7 +726,7 @@ CONFIG_BFIN_DMA_INTERFACE=m CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_DEVKMEM is not set -# CONFIG_BFIN_JTAG_COMM is not set +CONFIG_BFIN_JTAG_COMM=m # CONFIG_SERIAL_NONSTANDARD is not set # diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig index cd2da6b7692c..0f8697618aa5 100644 --- a/arch/blackfin/configs/BF548-EZKIT_defconfig +++ b/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -856,7 +856,7 @@ CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_DEVKMEM is not set -# CONFIG_BFIN_JTAG_COMM is not set +CONFIG_BFIN_JTAG_COMM=m # CONFIG_SERIAL_NONSTANDARD is not set # diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig index b398ca202dbd..042c7adfccfa 100644 --- a/arch/blackfin/configs/BF561-EZKIT_defconfig +++ b/arch/blackfin/configs/BF561-EZKIT_defconfig @@ -709,7 +709,7 @@ CONFIG_BFIN_DMA_INTERFACE=m CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_DEVKMEM is not set -# CONFIG_BFIN_JTAG_COMM is not set +CONFIG_BFIN_JTAG_COMM=m # CONFIG_SERIAL_NONSTANDARD is not set # -- cgit v1.2.2 From 65319628db2c7a630daadfeec4d371aaca788482 Mon Sep 17 00:00:00 2001 From: Graf Yang Date: Wed, 4 Feb 2009 16:49:45 +0800 Subject: Blackfin arch: add platform device bfin_mii-bus and KSZ8893M switch driver platform resources to board files Signed-off-by: Graf Yang Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf518/boards/ezbrd.c | 51 +++++++++++++++++++++++++ arch/blackfin/mach-bf527/boards/cm_bf527.c | 6 +++ arch/blackfin/mach-bf527/boards/ezbrd.c | 6 +++ arch/blackfin/mach-bf527/boards/ezkit.c | 6 +++ arch/blackfin/mach-bf537/boards/cm_bf537.c | 6 +++ arch/blackfin/mach-bf537/boards/generic_board.c | 6 +++ arch/blackfin/mach-bf537/boards/minotaur.c | 6 +++ arch/blackfin/mach-bf537/boards/pnav10.c | 6 +++ arch/blackfin/mach-bf537/boards/stamp.c | 6 +++ arch/blackfin/mach-bf537/boards/tcm_bf537.c | 6 +++ 10 files changed, 105 insertions(+) (limited to 'arch') diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c index b23108bcbf59..0e175342112e 100644 --- a/arch/blackfin/mach-bf518/boards/ezbrd.c +++ b/arch/blackfin/mach-bf518/boards/ezbrd.c @@ -46,6 +46,7 @@ #include #include #include +#include /* * Name the Board for the /proc/cpuinfo @@ -104,8 +105,31 @@ static struct platform_device rtc_device = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mii_bus = { + .name = "bfin_mii_bus", +}; + static struct platform_device bfin_mac_device = { .name = "bfin_mac", + .dev.platform_data = &bfin_mii_bus, +}; +#endif + +#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) +static struct dsa_platform_data ksz8893m_switch_data = { + .mii_bus = &bfin_mii_bus.dev, + .netdev = &bfin_mac_device.dev, + .port_names[0] = NULL, + .port_names[1] = "eth%d", + .port_names[2] = "eth%d", + .port_names[3] = "cpu", +}; + +static struct platform_device ksz8893m_switch_device = { + .name = "dsa", + .id = 0, + .num_resources = 0, + .dev.platform_data = &ksz8893m_switch_data, }; #endif @@ -147,6 +171,15 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { }; #endif +#if defined(CONFIG_NET_DSA_KSZ8893M) \ + || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) +/* SPI SWITCH CHIP */ +static struct bfin5xx_spi_chip spi_switch_info = { + .enable_dma = 0, + .bits_per_word = 8, +}; +#endif + #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) static struct bfin5xx_spi_chip spi_mmc_chip_info = { .enable_dma = 1, @@ -226,6 +259,19 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif +#if defined(CONFIG_NET_DSA_KSZ8893M) \ + || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) + { + .modalias = "ksz8893m", + .max_speed_hz = 5000000, + .bus_num = 0, + .chip_select = 1, + .platform_data = NULL, + .controller_data = &spi_switch_info, + .mode = SPI_MODE_3, + }, +#endif + #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) { .modalias = "spi_mmc_dummy", @@ -582,9 +628,14 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mii_bus, &bfin_mac_device, #endif +#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) + &ksz8893m_switch_device, +#endif + #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) &bfin_spi0_device, &bfin_spi1_device, diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c index 98ab8bc28304..856c097b5317 100644 --- a/arch/blackfin/mach-bf527/boards/cm_bf527.c +++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c @@ -403,8 +403,13 @@ static struct platform_device isp1362_hcd_device = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mii_bus = { + .name = "bfin_mii_bus", +}; + static struct platform_device bfin_mac_device = { .name = "bfin_mac", + .dev.platform_data = &bfin_mii_bus, }; #endif @@ -918,6 +923,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mii_bus, &bfin_mac_device, #endif diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c index d0f29870f1a4..83606fcdde27 100644 --- a/arch/blackfin/mach-bf527/boards/ezbrd.c +++ b/arch/blackfin/mach-bf527/boards/ezbrd.c @@ -208,8 +208,13 @@ static struct platform_device rtc_device = { #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mii_bus = { + .name = "bfin_mii_bus", +}; + static struct platform_device bfin_mac_device = { .name = "bfin_mac", + .dev.platform_data = &bfin_mii_bus, }; #endif @@ -718,6 +723,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mii_bus, &bfin_mac_device, #endif diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index 1f7a249d6926..d0864111ef59 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -425,8 +425,13 @@ static struct platform_device isp1362_hcd_device = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mii_bus = { + .name = "bfin_mii_bus", +}; + static struct platform_device bfin_mac_device = { .name = "bfin_mac", + .dev.platform_data = &bfin_mii_bus, }; #endif @@ -986,6 +991,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mii_bus, &bfin_mac_device, #endif diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c index 6ac8e4d5bd38..9cd8fb2a30d3 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c @@ -479,8 +479,13 @@ static struct platform_device bfin_sport1_uart_device = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mii_bus = { + .name = "bfin_mii_bus", +}; + static struct platform_device bfin_mac_device = { .name = "bfin_mac", + .dev.platform_data = &bfin_mii_bus, }; #endif @@ -591,6 +596,7 @@ static struct platform_device *cm_bf537_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mii_bus, &bfin_mac_device, #endif diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c index fb0368ec2aff..da710fdc4569 100644 --- a/arch/blackfin/mach-bf537/boards/generic_board.c +++ b/arch/blackfin/mach-bf537/boards/generic_board.c @@ -262,8 +262,13 @@ static struct platform_device isp1362_hcd_device = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mii_bus = { + .name = "bfin_mii_bus", +}; + static struct platform_device bfin_mac_device = { .name = "bfin_mac", + .dev.platform_data = &bfin_mii_bus, }; #endif @@ -662,6 +667,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mii_bus, &bfin_mac_device, #endif diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c index 8f36d260aee2..db7d3a385e4b 100644 --- a/arch/blackfin/mach-bf537/boards/minotaur.c +++ b/arch/blackfin/mach-bf537/boards/minotaur.c @@ -61,8 +61,13 @@ static struct platform_device rtc_device = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mii_bus = { + .name = "bfin_mii_bus", +}; + static struct platform_device bfin_mac_device = { .name = "bfin_mac", + .dev.platform_data = &bfin_mii_bus, }; #endif @@ -324,6 +329,7 @@ static struct platform_device *minotaur_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mii_bus, &bfin_mac_device, #endif diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c index 8835c58cfaec..590eb3a139b7 100644 --- a/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/arch/blackfin/mach-bf537/boards/pnav10.c @@ -198,8 +198,13 @@ static struct platform_device isp1362_hcd_device = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mii_bus = { + .name = "bfin_mii_bus", +}; + static struct platform_device bfin_mac_device = { .name = "bfin_mac", + .dev.platform_data = &bfin_mii_bus, }; #endif @@ -529,6 +534,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mii_bus, &bfin_mac_device, #endif diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 2300ed4ec601..cd04c5e44878 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -321,8 +321,13 @@ static struct platform_device isp1362_hcd_device = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mii_bus = { + .name = "bfin_mii_bus", +}; + static struct platform_device bfin_mac_device = { .name = "bfin_mac", + .dev.platform_data = &bfin_mii_bus, }; #endif @@ -1215,6 +1220,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mii_bus, &bfin_mac_device, #endif diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c index 2e60bbad73ee..3f4f203a06ec 100644 --- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c @@ -481,8 +481,13 @@ static struct platform_device bfin_sport1_uart_device = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mii_bus = { + .name = "bfin_mii_bus", +}; + static struct platform_device bfin_mac_device = { .name = "bfin_mac", + .dev.platform_data = &bfin_mii_bus, }; #endif @@ -593,6 +598,7 @@ static struct platform_device *cm_bf537_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mii_bus, &bfin_mac_device, #endif -- cgit v1.2.2 From bf324cb81a2f7da357eba00b6b1ef1cf38c264b8 Mon Sep 17 00:00:00 2001 From: Bernd Schmidt Date: Wed, 4 Feb 2009 16:49:45 +0800 Subject: Blackfin arch: fix bug - traps test case 19 for exception 0x2d fails Enable null pointer checking for ICPLBs. The code was there but for some reason I had commented it out at some stage during development. Should restrict this to 1K since atomic ops start there. Signed-off-by: Bernd Schmidt Signed-off-by: Bryan Wu --- arch/blackfin/kernel/cplb-mpu/cplbinit.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/arch/blackfin/kernel/cplb-mpu/cplbinit.c index bdb958486e76..3e329a6ce041 100644 --- a/arch/blackfin/kernel/cplb-mpu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-mpu/cplbinit.c @@ -63,10 +63,8 @@ void __init generate_cplb_tables_cpu(unsigned int cpu) dcplb_tbl[cpu][i_d].addr = 0; dcplb_tbl[cpu][i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB; -#if 0 icplb_tbl[cpu][i_i].addr = 0; - icplb_tbl[cpu][i_i++].data = i_cache | CPLB_USER_RD | PAGE_SIZE_4KB; -#endif + icplb_tbl[cpu][i_i++].data = i_cache | CPLB_USER_RD | PAGE_SIZE_1KB; /* Cover kernel memory with 4M pages. */ addr = 0; -- cgit v1.2.2 From d04dfc4c0e6056350175edc36b900a69703e9467 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 4 Feb 2009 16:49:45 +0800 Subject: Blackfin arch: cplb mananger: use a do...while loop rather than a for loop use a do...while loop rather than a for loop to get slightly better optimization and to avoid gcc "may be used uninitialized" warnings ... we know that the [id]cplb_nr_bounds variables will never be 0, so this is OK Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/kernel/cplb-nompu/cplbmgr.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/cplb-nompu/cplbmgr.c b/arch/blackfin/kernel/cplb-nompu/cplbmgr.c index 376249ab2694..8cbb47c7b663 100644 --- a/arch/blackfin/kernel/cplb-nompu/cplbmgr.c +++ b/arch/blackfin/kernel/cplb-nompu/cplbmgr.c @@ -163,12 +163,14 @@ MGR_ATTR static int icplb_miss(int cpu) nr_icplb_supv_miss[cpu]++; base = 0; - for (idx = 0; idx < icplb_nr_bounds; idx++) { + idx = 0; + do { eaddr = icplb_bounds[idx].eaddr; if (addr < eaddr) break; base = eaddr; - } + } while (++idx < icplb_nr_bounds); + if (unlikely(idx == icplb_nr_bounds)) return CPLB_NO_ADDR_MATCH; @@ -208,12 +210,14 @@ MGR_ATTR static int dcplb_miss(int cpu) nr_dcplb_supv_miss[cpu]++; base = 0; - for (idx = 0; idx < dcplb_nr_bounds; idx++) { + idx = 0; + do { eaddr = dcplb_bounds[idx].eaddr; if (addr < eaddr) break; base = eaddr; - } + } while (++idx < dcplb_nr_bounds); + if (unlikely(idx == dcplb_nr_bounds)) return CPLB_NO_ADDR_MATCH; -- cgit v1.2.2 From af4c7d4b4eddc297bbb516abdd6154bffc8e05e5 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 4 Feb 2009 16:49:45 +0800 Subject: Blackfin arch: define bfin_memmap as static since it is only used here Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/kernel/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 86feb4274218..39bdedcb9233 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -60,7 +60,7 @@ void __initdata *init_retx, *init_saved_retx, *init_saved_seqstat, #define BFIN_MEMMAP_MAX 128 /* number of entries in bfin_memmap */ #define BFIN_MEMMAP_RAM 1 #define BFIN_MEMMAP_RESERVED 2 -struct bfin_memmap { +static struct bfin_memmap { int nr_map; struct bfin_memmap_entry { unsigned long long addr; /* start of memory segment */ -- cgit v1.2.2 From dfd700baf2ddab395cc059ce9f294306bf56a735 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Wed, 4 Feb 2009 16:49:45 +0800 Subject: Blackfin arch: Update CM-BF527 kernel config Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/configs/CM-BF527_defconfig | 445 ++++++++++++++++++++++--------- 1 file changed, 321 insertions(+), 124 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig index 95146948166f..865ed85a5760 100644 --- a/arch/blackfin/configs/CM-BF527_defconfig +++ b/arch/blackfin/configs/CM-BF527_defconfig @@ -1,7 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24.7 -# Fri Jul 18 18:00:41 2008 +# Linux kernel version: 2.6.28 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -9,7 +8,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y CONFIG_ZONE_DMA=y -CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y @@ -32,18 +30,16 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set -# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -52,26 +48,35 @@ CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -82,6 +87,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -95,9 +101,11 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set +# CONFIG_FREEZER is not set # # Blackfin Processor Options @@ -106,6 +114,10 @@ CONFIG_PREEMPT_VOLUNTARY=y # # Processor and Board Settings # +# CONFIG_BF512 is not set +# CONFIG_BF514 is not set +# CONFIG_BF516 is not set +# CONFIG_BF518 is not set # CONFIG_BF522 is not set # CONFIG_BF523 is not set # CONFIG_BF524 is not set @@ -118,48 +130,32 @@ CONFIG_BF527=y # CONFIG_BF534 is not set # CONFIG_BF536 is not set # CONFIG_BF537 is not set +# CONFIG_BF538 is not set +# CONFIG_BF539 is not set # CONFIG_BF542 is not set +# CONFIG_BF542M is not set # CONFIG_BF544 is not set +# CONFIG_BF544M is not set # CONFIG_BF547 is not set +# CONFIG_BF547M is not set # CONFIG_BF548 is not set +# CONFIG_BF548M is not set # CONFIG_BF549 is not set +# CONFIG_BF549M is not set # CONFIG_BF561 is not set +CONFIG_BF_REV_MIN=0 +CONFIG_BF_REV_MAX=2 # CONFIG_BF_REV_0_0 is not set CONFIG_BF_REV_0_1=y # CONFIG_BF_REV_0_2 is not set # CONFIG_BF_REV_0_3 is not set # CONFIG_BF_REV_0_4 is not set # CONFIG_BF_REV_0_5 is not set +# CONFIG_BF_REV_0_6 is not set # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set CONFIG_BF52x=y CONFIG_MEM_MT48LC16M16A2TG_75=y -# CONFIG_BFIN527_EZKIT is not set -CONFIG_BFIN527_BLUETECHNIX_CM=y - -# -# BF527 Specific Configuration -# - -# -# Alternative Multiplexing Scheme -# -# CONFIG_BF527_SPORT0_PORTF is not set -CONFIG_BF527_SPORT0_PORTG=y -CONFIG_BF527_SPORT0_TSCLK_PG10=y -# CONFIG_BF527_SPORT0_TSCLK_PG14 is not set -CONFIG_BF527_UART1_PORTF=y -# CONFIG_BF527_UART1_PORTG is not set -# CONFIG_BF527_NAND_D_PORTF is not set -CONFIG_BF527_NAND_D_PORTH=y - -# -# Interrupt Priority Assignment -# - -# -# Priority -# CONFIG_IRQ_PLL_WAKEUP=7 CONFIG_IRQ_DMA0_ERROR=7 CONFIG_IRQ_DMAR0_BLK=7 @@ -179,7 +175,6 @@ CONFIG_IRQ_SPORT0_TX=9 CONFIG_IRQ_SPORT1_RX=9 CONFIG_IRQ_SPORT1_TX=9 CONFIG_IRQ_TWI=10 -CONFIG_IRQ_SPI=10 CONFIG_IRQ_UART0_RX=10 CONFIG_IRQ_UART0_TX=10 CONFIG_IRQ_UART1_RX=10 @@ -205,6 +200,34 @@ CONFIG_IRQ_MEM_DMA1=13 CONFIG_IRQ_WATCH=13 CONFIG_IRQ_PORTF_INTA=13 CONFIG_IRQ_PORTF_INTB=13 +# CONFIG_BFIN527_EZKIT is not set +CONFIG_BFIN527_BLUETECHNIX_CM=y +# CONFIG_BFIN526_EZBRD is not set + +# +# BF527 Specific Configuration +# + +# +# Alternative Multiplexing Scheme +# +# CONFIG_BF527_SPORT0_PORTF is not set +CONFIG_BF527_SPORT0_PORTG=y +CONFIG_BF527_SPORT0_TSCLK_PG10=y +# CONFIG_BF527_SPORT0_TSCLK_PG14 is not set +CONFIG_BF527_UART1_PORTF=y +# CONFIG_BF527_UART1_PORTG is not set +# CONFIG_BF527_NAND_D_PORTF is not set +CONFIG_BF527_NAND_D_PORTH=y + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_IRQ_SPI=10 CONFIG_IRQ_SPI_ERROR=7 CONFIG_IRQ_NFC_ERROR=7 CONFIG_IRQ_HDMA_ERROR=7 @@ -226,7 +249,6 @@ CONFIG_BOOT_LOAD=0x1000 # CONFIG_CLKIN_HZ=25000000 # CONFIG_BFIN_KERNEL_CLOCK is not set -CONFIG_MAX_MEM_SIZE=512 CONFIG_MAX_VCO_HZ=600000000 CONFIG_MIN_VCO_HZ=50000000 CONFIG_MAX_SCLK_HZ=133333333 @@ -240,10 +262,10 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_CYCLES_CLOCKSOURCE is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -277,6 +299,12 @@ CONFIG_ACCESS_OK_L1=y CONFIG_CACHELINE_ALIGNED_L1=y # CONFIG_SYSCALL_TAB_L1 is not set # CONFIG_CPLB_SWITCH_TAB_L1 is not set +CONFIG_APP_STACK_L1=y + +# +# Speed Optimizations +# +CONFIG_BFIN_INS_LOWOVERHEAD=y CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set CONFIG_SELECT_MEMORY_MODEL=y @@ -285,10 +313,10 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y CONFIG_BFIN_GPTIMERS=y @@ -334,7 +362,6 @@ CONFIG_BANK_3=0xFFC0 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # -# CONFIG_PCI is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set @@ -345,25 +372,20 @@ CONFIG_BINFMT_ELF_FDPIC=y CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y # CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -# CONFIG_PM_BFIN_SLEEP_DEEPER is not set -# CONFIG_PM_BFIN_SLEEP is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM_WAKEUP_BY_GPIO is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set - -# -# Networking -# CONFIG_NET=y # @@ -376,6 +398,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -405,8 +428,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set @@ -415,6 +436,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -431,14 +453,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -456,6 +478,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y @@ -464,6 +488,7 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -507,6 +532,7 @@ CONFIG_MTD_ROM=m # CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_GPIO_ADDR is not set # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -542,10 +568,12 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -558,7 +586,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -579,6 +606,7 @@ CONFIG_PHYLIB=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -591,11 +619,14 @@ CONFIG_BFIN_MAC_RMII=y # CONFIG_SMC91X is not set # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -604,6 +635,7 @@ CONFIG_BFIN_MAC_RMII=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -616,7 +648,6 @@ CONFIG_BFIN_MAC_RMII=y # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -642,14 +673,15 @@ CONFIG_BFIN_MAC_RMII=y # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BF5xx_PPI is not set -CONFIG_BFIN_OTP=y -# CONFIG_BFIN_OTP_WRITE_ENABLE is not set +# CONFIG_BF5xx_EPPI is not set # CONFIG_BFIN_SPORT is not set # CONFIG_BFIN_TIMER_LATENCY is not set # CONFIG_TWI_LCD is not set +CONFIG_BFIN_DMA_INTERFACE=m CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_DEVKMEM is not set +# CONFIG_BFIN_JTAG_COMM is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -673,6 +705,8 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set +CONFIG_BFIN_OTP=y +# CONFIG_BFIN_OTP_WRITE_ENABLE is not set # # CAN, the car bus and industrial fieldbus @@ -680,44 +714,49 @@ CONFIG_UNIX98_PTYS=y # CONFIG_CAN4LINUX is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m +CONFIG_I2C_HELPER_AUTO=y # -# I2C Algorithms +# I2C Hardware Bus support # -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set # -# I2C Hardware Bus support +# I2C system bus drivers (mostly embedded / system-on-chip) # CONFIG_I2C_BLACKFIN_TWI=m CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set # CONFIG_I2C_TINY_USB is not set +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_AD5252 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8575 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set @@ -726,37 +765,41 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y # # SPI Master Controller Drivers # CONFIG_SPI_BFIN=y +# CONFIG_SPI_BFIN_LOCK is not set # CONFIG_SPI_BITBANG is not set # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set +# CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set @@ -777,6 +820,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -785,6 +829,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set @@ -792,9 +837,12 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -809,22 +857,32 @@ CONFIG_BFIN_WDT=y # # CONFIG_USBPCWATCHDOG is not set -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -839,10 +897,6 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y @@ -850,6 +904,7 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_EHCI is not set CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -860,40 +915,48 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set CONFIG_USB_OTG_BLACKLIST_HUB=y +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set CONFIG_USB_MUSB_HDRC=y CONFIG_USB_MUSB_SOC=y # -# Blackfin high speed USB support +# Blackfin high speed USB Support # CONFIG_USB_MUSB_HOST=y # CONFIG_USB_MUSB_PERIPHERAL is not set # CONFIG_USB_MUSB_OTG is not set CONFIG_USB_MUSB_HDRC_HCD=y CONFIG_MUSB_PIO_ONLY=y -CONFIG_USB_MUSB_LOGLEVEL=0 +CONFIG_MUSB_DMA_POLL=y +# CONFIG_USB_MUSB_DEBUG is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # # CONFIG_USB_LIBUSUAL is not set @@ -901,15 +964,10 @@ CONFIG_USB_MUSB_LOGLEVEL=0 # USB Imaging devices # # CONFIG_USB_MDC800 is not set -CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -918,7 +976,7 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -934,17 +992,13 @@ CONFIG_USB_MON=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -973,51 +1027,59 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers # -# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # CONFIG_RTC_DRV_BFIN=y - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1059,8 +1121,11 @@ CONFIG_SYSFS=y # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1068,13 +1133,12 @@ CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1130,7 +1194,6 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set -# CONFIG_INSTRUMENTATION is not set # # Kernel hacking @@ -1138,14 +1201,61 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_FRAME_POINTER is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set + +# +# Tracers +# +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_KGDB_TESTCASE is not set +CONFIG_DEBUG_VERBOSE=y CONFIG_DEBUG_MMRS=y +# CONFIG_DEBUG_HWERR is not set +# CONFIG_DEBUG_DOUBLEFAULT is not set CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y @@ -1154,7 +1264,7 @@ CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set -CONFIG_EARLY_PRINTK=y +# CONFIG_EARLY_PRINTK is not set # CONFIG_CPLB_INFO is not set CONFIG_ACCESS_CHECK=y @@ -1163,10 +1273,96 @@ CONFIG_ACCESS_CHECK=y # # CONFIG_KEYS is not set CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set -# CONFIG_SECURITY_CAPABILITIES is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_SECURITY_ROOTPLUG is not set -# CONFIG_CRYPTO is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y # # Library routines @@ -1174,6 +1370,7 @@ CONFIG_SECURITY=y CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set -- cgit v1.2.2 From 772c258fd056a77fd808385a1c551dcd141cf8a3 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Wed, 4 Feb 2009 16:49:45 +0800 Subject: Blackfin arch: Add BF561 PPI POLS, POLC Masks Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf561/include/mach/defBF561.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/blackfin/mach-bf561/include/mach/defBF561.h b/arch/blackfin/mach-bf561/include/mach/defBF561.h index d7c509759659..cf922295f4ce 100644 --- a/arch/blackfin/mach-bf561/include/mach/defBF561.h +++ b/arch/blackfin/mach-bf561/include/mach/defBF561.h @@ -1106,6 +1106,8 @@ #define DLEN_8 0x0 /* PPI Data Length mask for DLEN=8 */ #define DLEN(x) (((x-9) & 0x07) << 11) /* PPI Data Length (only works for x=10-->x=16) */ #define POL 0x0000C000 /* PPI Signal Polarities */ +#define POLC 0x4000 /* PPI Clock Polarity */ +#define POLS 0x8000 /* PPI Frame Sync Polarity */ /* PPI_STATUS Masks */ #define FLD 0x00000400 /* Field Indicator */ -- cgit v1.2.2 From 972de7d9292439c9429c301cf377fbf56b6e654e Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Wed, 4 Feb 2009 16:49:45 +0800 Subject: Blackfin arch: Update Copyright information Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/kernel/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 39bdedcb9233..e5c116230800 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -861,7 +861,7 @@ void __init setup_arch(char **cmdline_p) else if (_bfin_swrst & RESET_SOFTWARE) printk(KERN_NOTICE "Reset caused by Software reset\n"); - printk(KERN_INFO "Blackfin support (C) 2004-2008 Analog Devices, Inc.\n"); + printk(KERN_INFO "Blackfin support (C) 2004-2009 Analog Devices, Inc.\n"); if (bfin_compiled_revid() == 0xffff) printk(KERN_INFO "Compiled for ADSP-%s Rev any\n", CPU); else if (bfin_compiled_revid() == -1) -- cgit v1.2.2 From 4e653e04cc1c3553af539ffc81fb56d83d83c733 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Wed, 4 Feb 2009 16:49:45 +0800 Subject: Blackfin arch: Fix udelay implementation Avoid possible overflow during 32*32->32 multiplies. Reported-by: Marco Reppenhagen Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/include/asm/delay.h | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/include/asm/delay.h b/arch/blackfin/include/asm/delay.h index 0889c3abb593..47f98c5067b5 100644 --- a/arch/blackfin/include/asm/delay.h +++ b/arch/blackfin/include/asm/delay.h @@ -47,16 +47,15 @@ static inline void __delay(unsigned long loops) #include /* needed for HZ */ /* - * Use only for very small delays ( < 1 msec). Should probably use a - * lookup table, really, as the multiplications take much too long with - * short delays. This is a "reasonable" implementation, though (and the - * first constant multiplications gets optimized away if the delay is - * a constant) + * close approximation borrowed from m68knommu to avoid 64-bit math */ + +#define HZSCALE (268435456 / (1000000/HZ)) + static inline void udelay(unsigned long usecs) { extern unsigned long loops_per_jiffy; - __delay(usecs * loops_per_jiffy / (1000000 / HZ)); + __delay((((usecs * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6); } #endif -- cgit v1.2.2 From c8e674125e03c5f36ccfd61d83b933e6956074b0 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Wed, 4 Feb 2009 16:49:45 +0800 Subject: Blackfin arch: Remove outdated code The removed version with the loop registers saved on the stack was originally intended to workaround the missing toolchain support for LoopReg Clobbers. Since our toolchain now supports these there is no point in keeping this workaround. And since we don't touch LoopRegs anymore we're no longer subject for ANOMALY_05000312. Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/include/asm/delay.h | 24 +----------------------- 1 file changed, 1 insertion(+), 23 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/include/asm/delay.h b/arch/blackfin/include/asm/delay.h index 47f98c5067b5..c31f91cc1d5d 100644 --- a/arch/blackfin/include/asm/delay.h +++ b/arch/blackfin/include/asm/delay.h @@ -13,29 +13,7 @@ static inline void __delay(unsigned long loops) { - if (ANOMALY_05000312) { - /* Interrupted loads to loop registers -> bad */ - unsigned long tmp; - __asm__ __volatile__( - "[--SP] = LC0;" - "[--SP] = LT0;" - "[--SP] = LB0;" - "LSETUP (1f,1f) LC0 = %1;" - "1: NOP;" - /* We take advantage of the fact that LC0 is 0 at - * the end of the loop. Otherwise we'd need some - * NOPs after the CLI here. - */ - "CLI %0;" - "LB0 = [SP++];" - "LT0 = [SP++];" - "LC0 = [SP++];" - "STI %0;" - : "=d" (tmp) - : "a" (loops) - ); - } else - __asm__ __volatile__ ( +__asm__ __volatile__ ( "LSETUP(1f, 1f) LC0 = %0;" "1: NOP;" : -- cgit v1.2.2