From e9c36b0b09f29f4edefa5bfcbc7247bb8419edce Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Tue, 20 Nov 2012 10:01:51 +0530 Subject: powerpc/85xx: p1022ds: Use NULL instead of 0 for pointers The third argument for of_get_property() is a pointer, hence pass NULL instead of 0. Signed-off-by: Tushar Behera Signed-off-by: Kumar Gala --- arch/powerpc/platforms/85xx/p1022_ds.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c index 8fb12570b2f5..7328b8d74129 100644 --- a/arch/powerpc/platforms/85xx/p1022_ds.c +++ b/arch/powerpc/platforms/85xx/p1022_ds.c @@ -249,7 +249,7 @@ static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port) goto exit; } - iprop = of_get_property(law_node, "fsl,num-laws", 0); + iprop = of_get_property(law_node, "fsl,num-laws", NULL); if (!iprop) { pr_err("p1022ds: LAW node is missing fsl,num-laws property\n"); goto exit; -- cgit v1.2.2 From b567d1c74ecfe4c321bdba251506a95e4c837c86 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Mon, 15 Oct 2012 14:52:21 -0500 Subject: powerpc/86xx: fsl_pcibios_fixup_bus requires CONFIG_PCI Function fsl_pcibios_fixup_bus() is available only if PCI is enabled. The MPC8610 HPCD platform file was not protecting the assigned with an #ifdef, which results in a link failure when PCI is disabled. Every other platform already has this #ifdef. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/platforms/86xx/mpc8610_hpcd.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c index a817398a56da..04d9d317f741 100644 --- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c +++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c @@ -353,5 +353,7 @@ define_machine(mpc86xx_hpcd) { .time_init = mpc86xx_time_init, .calibrate_decr = generic_calibrate_decr, .progress = udbg_progress, +#ifdef CONFIG_PCI .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif }; -- cgit v1.2.2 From a393d8977acd834520357f951bb28ef46ee7db0a Mon Sep 17 00:00:00 2001 From: Jia Hongtao Date: Thu, 8 Nov 2012 10:11:07 +0800 Subject: powerpc/fsl-pci: Add PCI controller ATMU PM support Power supply for PCI controller ATMU registers is off when system go to deep-sleep state. So ATMU registers should be re-setup during PCI controllers resume from sleep. Signed-off-by: Jia Hongtao Signed-off-by: Li Yang Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/fsl_pci.c | 37 +++++++++++++++++++++++++++++++++++-- 1 file changed, 35 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index ffb93ae9379b..b96885b4e996 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -89,7 +89,7 @@ static int fsl_pci_dma_set_mask(struct device *dev, u64 dma_mask) return 0; } -static int __init setup_one_atmu(struct ccsr_pci __iomem *pci, +static int setup_one_atmu(struct ccsr_pci __iomem *pci, unsigned int index, const struct resource *res, resource_size_t offset) { @@ -126,7 +126,7 @@ static int __init setup_one_atmu(struct ccsr_pci __iomem *pci, } /* atmu setup for fsl pci/pcie controller */ -static void __init setup_pci_atmu(struct pci_controller *hose, +static void setup_pci_atmu(struct pci_controller *hose, struct resource *rsrc) { struct ccsr_pci __iomem *pci; @@ -902,9 +902,42 @@ static int __devinit fsl_pci_probe(struct platform_device *pdev) return 0; } +#ifdef CONFIG_PM +static int fsl_pci_resume(struct device *dev) +{ + struct pci_controller *hose; + struct resource pci_rsrc; + + hose = pci_find_hose_for_OF_device(dev->of_node); + if (!hose) + return -ENODEV; + + if (of_address_to_resource(dev->of_node, 0, &pci_rsrc)) { + dev_err(dev, "Get pci register base failed."); + return -ENODEV; + } + + setup_pci_atmu(hose, &pci_rsrc); + + return 0; +} + +static const struct dev_pm_ops pci_pm_ops = { + .resume = fsl_pci_resume, +}; + +#define PCI_PM_OPS (&pci_pm_ops) + +#else + +#define PCI_PM_OPS NULL + +#endif + static struct platform_driver fsl_pci_driver = { .driver = { .name = "fsl-pci", + .pm = PCI_PM_OPS, .of_match_table = pci_ids, }, .probe = fsl_pci_probe, -- cgit v1.2.2 From bc15236fbed1e017b465e38a9d2092393778a2f7 Mon Sep 17 00:00:00 2001 From: York Sun Date: Sat, 29 Sep 2012 16:44:35 -0700 Subject: powerpc/mpc85xx: Change spin table to cached memory ePAPR v1.1 requires the spin table to be in cached memory. So we need to change the call argument of ioremap to enable cache and coherence. We also flush the cache after writing to spin table to keep it compatible with previous cache-inhibit spin table. Flushing before and after accessing spin table is recommended by ePAPR. Signed-off-by: York Sun Acked-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/platforms/85xx/smp.c | 49 ++++++++++++++++++++++++++++----------- 1 file changed, 36 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c index 6fcfa12e5c56..148c2f2d9780 100644 --- a/arch/powerpc/platforms/85xx/smp.c +++ b/arch/powerpc/platforms/85xx/smp.c @@ -128,6 +128,19 @@ static void __cpuinit smp_85xx_mach_cpu_die(void) } #endif +static inline void flush_spin_table(void *spin_table) +{ + flush_dcache_range((ulong)spin_table, + (ulong)spin_table + sizeof(struct epapr_spin_table)); +} + +static inline u32 read_spin_table_addr_l(void *spin_table) +{ + flush_dcache_range((ulong)spin_table, + (ulong)spin_table + sizeof(struct epapr_spin_table)); + return in_be32(&((struct epapr_spin_table *)spin_table)->addr_l); +} + static int __cpuinit smp_85xx_kick_cpu(int nr) { unsigned long flags; @@ -161,8 +174,8 @@ static int __cpuinit smp_85xx_kick_cpu(int nr) /* Map the spin table */ if (ioremappable) - spin_table = ioremap(*cpu_rel_addr, - sizeof(struct epapr_spin_table)); + spin_table = ioremap_prot(*cpu_rel_addr, + sizeof(struct epapr_spin_table), _PAGE_COHERENT); else spin_table = phys_to_virt(*cpu_rel_addr); @@ -173,7 +186,16 @@ static int __cpuinit smp_85xx_kick_cpu(int nr) generic_set_cpu_up(nr); if (system_state == SYSTEM_RUNNING) { + /* + * To keep it compatible with old boot program which uses + * cache-inhibit spin table, we need to flush the cache + * before accessing spin table to invalidate any staled data. + * We also need to flush the cache after writing to spin + * table to push data out. + */ + flush_spin_table(spin_table); out_be32(&spin_table->addr_l, 0); + flush_spin_table(spin_table); /* * We don't set the BPTR register here since it already points @@ -181,9 +203,14 @@ static int __cpuinit smp_85xx_kick_cpu(int nr) */ mpic_reset_core(hw_cpu); - /* wait until core is ready... */ - if (!spin_event_timeout(in_be32(&spin_table->addr_l) == 1, - 10000, 100)) { + /* + * wait until core is ready... + * We need to invalidate the stale data, in case the boot + * loader uses a cache-inhibited spin table. + */ + if (!spin_event_timeout( + read_spin_table_addr_l(spin_table) == 1, + 10000, 100)) { pr_err("%s: timeout waiting for core %d to reset\n", __func__, hw_cpu); ret = -ENOENT; @@ -194,12 +221,10 @@ static int __cpuinit smp_85xx_kick_cpu(int nr) __secondary_hold_acknowledge = -1; } #endif + flush_spin_table(spin_table); out_be32(&spin_table->pir, hw_cpu); out_be32(&spin_table->addr_l, __pa(__early_start)); - - if (!ioremappable) - flush_dcache_range((ulong)spin_table, - (ulong)spin_table + sizeof(struct epapr_spin_table)); + flush_spin_table(spin_table); /* Wait a bit for the CPU to ack. */ if (!spin_event_timeout(__secondary_hold_acknowledge == hw_cpu, @@ -213,13 +238,11 @@ out: #else smp_generic_kick_cpu(nr); + flush_spin_table(spin_table); out_be32(&spin_table->pir, hw_cpu); out_be64((u64 *)(&spin_table->addr_h), __pa((u64)*((unsigned long long *)generic_secondary_smp_init))); - - if (!ioremappable) - flush_dcache_range((ulong)spin_table, - (ulong)spin_table + sizeof(struct epapr_spin_table)); + flush_spin_table(spin_table); #endif local_irq_restore(flags); -- cgit v1.2.2 From 5320b50797a9a5373f31f5b1c26346357f73e179 Mon Sep 17 00:00:00 2001 From: Varun Sethi Date: Tue, 20 Nov 2012 19:24:55 +0530 Subject: powerpc/iommu/fsl: Add PAMU bypass enable register to ccsr_guts struct PAMU bypass enable register added to the ccsr_guts structure. Signed-off-by: Timur Tabi Signed-off-by: Varun Sethi Signed-off-by: Kumar Gala --- arch/powerpc/include/asm/fsl_guts.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/fsl_guts.h b/arch/powerpc/include/asm/fsl_guts.h index dd5ba2c22771..77ced0b3d81d 100644 --- a/arch/powerpc/include/asm/fsl_guts.h +++ b/arch/powerpc/include/asm/fsl_guts.h @@ -71,7 +71,9 @@ struct ccsr_guts { u8 res0c4[0x224 - 0xc4]; __be32 iodelay1; /* 0x.0224 - IO delay control register 1 */ __be32 iodelay2; /* 0x.0228 - IO delay control register 2 */ - u8 res22c[0x800 - 0x22c]; + u8 res22c[0x604 - 0x22c]; + __be32 pamubypenr; /* 0x.604 - PAMU bypass enable register */ + u8 res608[0x800 - 0x608]; __be32 clkdvdr; /* 0x.0800 - Clock Divide Register */ u8 res804[0x900 - 0x804]; __be32 ircr; /* 0x.0900 - Infrared Control Register */ -- cgit v1.2.2 From 1723d90915d4689fa2e8cd4151d45ea38c96cb99 Mon Sep 17 00:00:00 2001 From: Xuelin Shi Date: Wed, 21 Nov 2012 17:01:20 +0800 Subject: powerpc/dma/raidengine: add raidengine device The RaidEngine is a new Freescale hardware that used for parity computation offloading in RAID5/6. This patch adds the device node in device tree and related binding documentation. Signed-off-by: Harninder Rai Signed-off-by: Naveen Burmi Signed-off-by: Xuelin Shi Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/fsl/p5020si-post.dtsi | 1 + arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi | 6 ++ arch/powerpc/boot/dts/fsl/qoriq-raid1.0-0.dtsi | 85 ++++++++++++++++++++++++++ 3 files changed, 92 insertions(+) create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-raid1.0-0.dtsi (limited to 'arch') diff --git a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi index 64b6abea8464..5d7205b7bb05 100644 --- a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi @@ -354,4 +354,5 @@ /include/ "qoriq-sata2-0.dtsi" /include/ "qoriq-sata2-1.dtsi" /include/ "qoriq-sec4.2-0.dtsi" +/include/ "qoriq-raid1.0-0.dtsi" }; diff --git a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi index 0a198b0a77e5..8df47fc45ab5 100644 --- a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi @@ -73,6 +73,12 @@ rtic_c = &rtic_c; rtic_d = &rtic_d; sec_mon = &sec_mon; + + raideng = &raideng; + raideng_jr0 = &raideng_jr0; + raideng_jr1 = &raideng_jr1; + raideng_jr2 = &raideng_jr2; + raideng_jr3 = &raideng_jr3; }; cpus { diff --git a/arch/powerpc/boot/dts/fsl/qoriq-raid1.0-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-raid1.0-0.dtsi new file mode 100644 index 000000000000..8d2e8aa6cf8a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-raid1.0-0.dtsi @@ -0,0 +1,85 @@ +/* + * QorIQ RAID 1.0 device tree stub [ controller @ offset 0x320000 ] + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +raideng: raideng@320000 { + compatible = "fsl,raideng-v1.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x320000 0x10000>; + ranges = <0 0x320000 0x10000>; + + raideng_jq0@1000 { + compatible = "fsl,raideng-v1.0-job-queue"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x1000 0x1000>; + ranges = <0x0 0x1000 0x1000>; + + raideng_jr0: jr@0 { + compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-hp-ring"; + reg = <0x0 0x400>; + interrupts = <139 2 0 0>; + interrupt-parent = <&mpic>; + }; + + raideng_jr1: jr@400 { + compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-lp-ring"; + reg = <0x400 0x400>; + interrupts = <140 2 0 0>; + interrupt-parent = <&mpic>; + }; + }; + + raideng_jq1@2000 { + compatible = "fsl,raideng-v1.0-job-queue"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x2000 0x1000>; + ranges = <0x0 0x2000 0x1000>; + + raideng_jr2: jr@0 { + compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-hp-ring"; + reg = <0x0 0x400>; + interrupts = <141 2 0 0>; + interrupt-parent = <&mpic>; + }; + + raideng_jr3: jr@400 { + compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-lp-ring"; + reg = <0x400 0x400>; + interrupts = <142 2 0 0>; + interrupt-parent = <&mpic>; + }; + }; +}; -- cgit v1.2.2