From 1f3a6a15771ed70d3b2581663dcc6b9bc134baa5 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Thu, 28 Jul 2005 14:42:00 -0400 Subject: [ACPI] acpi_register_gsi() can return error Current acpi_register_gsi() function has no way to indicate errors to its callers even though acpi_register_gsi() can fail to register gsi because of some reasons (out of memory, lack of interrupt vectors, incorrect BIOS, and so on). As a result, caller of acpi_register_gsi() cannot handle the case that acpi_register_gsi() fails. I think failure of acpi_register_gsi() should be handled properly. This series of patches changes acpi_register_gsi() to return negative value on error, and also changes callers of acpi_register_gsi() to handle failure of acpi_register_gsi(). This patch changes the type of return value of acpi_register_gsi() from "unsigned int" to "int" to indicate an error. If acpi_register_gsi() fails to register gsi, it returns negative value. Signed-off-by: Kenji Kaneshige Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- arch/i386/kernel/acpi/boot.c | 6 +++++- arch/ia64/kernel/acpi.c | 6 +++++- 2 files changed, 10 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c index 848bb97af7ca..364f4b7c4e3e 100644 --- a/arch/i386/kernel/acpi/boot.c +++ b/arch/i386/kernel/acpi/boot.c @@ -457,7 +457,11 @@ int acpi_gsi_to_irq(u32 gsi, unsigned int *irq) return 0; } -unsigned int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low) +/* + * success: return IRQ number (>=0) + * failure: return < 0 + */ +int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low) { unsigned int irq; unsigned int plat_gsi = gsi; diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 1c118b72df3c..7513ff9361a0 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -565,7 +565,11 @@ acpi_numa_arch_fixup (void) } #endif /* CONFIG_ACPI_NUMA */ -unsigned int +/* + * success: return IRQ number (>=0) + * failure: return < 0 + */ +int acpi_register_gsi (u32 gsi, int edge_level, int active_high_low) { if (has_8259 && gsi < 16) -- cgit v1.2.2 From 14454a1b3ff8d1d15fbe7cc77f27373777184ddf Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Thu, 28 Jul 2005 14:42:00 -0400 Subject: [ACPI] iosapic_register_intr() now returns error instead of panic error condition is passed along by acpi_register_gsi(). Signed-off-by: Kenji Kaneshige Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- arch/ia64/kernel/iosapic.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c index 88b014381df5..40afbfa47eca 100644 --- a/arch/ia64/kernel/iosapic.c +++ b/arch/ia64/kernel/iosapic.c @@ -562,7 +562,7 @@ static inline int vector_is_shared (int vector) return (iosapic_intr_info[vector].count > 1); } -static void +static int register_intr (unsigned int gsi, int vector, unsigned char delivery, unsigned long polarity, unsigned long trigger) { @@ -577,7 +577,7 @@ register_intr (unsigned int gsi, int vector, unsigned char delivery, index = find_iosapic(gsi); if (index < 0) { printk(KERN_WARNING "%s: No IOSAPIC for GSI %u\n", __FUNCTION__, gsi); - return; + return -ENODEV; } iosapic_address = iosapic_lists[index].addr; @@ -588,7 +588,7 @@ register_intr (unsigned int gsi, int vector, unsigned char delivery, rte = iosapic_alloc_rte(); if (!rte) { printk(KERN_WARNING "%s: cannot allocate memory\n", __FUNCTION__); - return; + return -ENOMEM; } rte_index = gsi - gsi_base; @@ -603,7 +603,7 @@ register_intr (unsigned int gsi, int vector, unsigned char delivery, struct iosapic_intr_info *info = &iosapic_intr_info[vector]; if (info->trigger != trigger || info->polarity != polarity) { printk (KERN_WARNING "%s: cannot override the interrupt\n", __FUNCTION__); - return; + return -EINVAL; } } @@ -623,6 +623,7 @@ register_intr (unsigned int gsi, int vector, unsigned char delivery, __FUNCTION__, vector, idesc->handler->typename, irq_type->typename); idesc->handler = irq_type; } + return 0; } static unsigned int @@ -710,7 +711,7 @@ int iosapic_register_intr (unsigned int gsi, unsigned long polarity, unsigned long trigger) { - int vector, mask = 1; + int vector, mask = 1, err; unsigned int dest; unsigned long flags; struct iosapic_rte_info *rte; @@ -735,8 +736,11 @@ again: /* If vector is running out, we try to find a sharable vector */ vector = assign_irq_vector_nopanic(AUTO_ASSIGN); - if (vector < 0) + if (vector < 0) { vector = iosapic_find_sharable_vector(trigger, polarity); + if (vector < 0) + Return -ENOSPC; + } spin_lock_irqsave(&irq_descp(vector)->lock, flags); spin_lock(&iosapic_lock); @@ -750,8 +754,13 @@ again: } dest = get_target_cpu(gsi, vector); - register_intr(gsi, vector, IOSAPIC_LOWEST_PRIORITY, + err = register_intr(gsi, vector, IOSAPIC_LOWEST_PRIORITY, polarity, trigger); + if (err < 0) { + spin_unlock(&iosapic_lock); + spin_unlock_irqrestore(&irq_descp(vector)->lock, flags); + return err; + } /* * If the vector is shared and already unmasked for -- cgit v1.2.2 From 4be44fcd3bf648b782f4460fd06dfae6c42ded4b Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 5 Aug 2005 00:44:28 -0400 Subject: [ACPI] Lindent all ACPI files Signed-off-by: Len Brown --- arch/i386/kernel/acpi/boot.c | 530 ++++++++++++++++++------------------- arch/i386/kernel/acpi/earlyquirk.c | 40 +-- arch/i386/kernel/acpi/sleep.c | 35 +-- arch/ia64/kernel/acpi-ext.c | 37 +-- arch/ia64/kernel/acpi.c | 324 ++++++++++++----------- arch/x86_64/kernel/acpi/sleep.c | 17 +- 6 files changed, 496 insertions(+), 487 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c index 55c0fbd68956..98d119c66379 100644 --- a/arch/i386/kernel/acpi/boot.c +++ b/arch/i386/kernel/acpi/boot.c @@ -40,19 +40,25 @@ #ifdef CONFIG_X86_64 -static inline void acpi_madt_oem_check(char *oem_id, char *oem_table_id) { } +static inline void acpi_madt_oem_check(char *oem_id, char *oem_table_id) +{ +} extern void __init clustered_apic_check(void); -static inline int ioapic_setup_disabled(void) { return 0; } +static inline int ioapic_setup_disabled(void) +{ + return 0; +} + #include -#else /* X86 */ +#else /* X86 */ #ifdef CONFIG_X86_LOCAL_APIC #include #include -#endif /* CONFIG_X86_LOCAL_APIC */ +#endif /* CONFIG_X86_LOCAL_APIC */ -#endif /* X86 */ +#endif /* X86 */ #define BAD_MADT_ENTRY(entry, end) ( \ (!entry) || (unsigned long)entry + sizeof(*entry) > end || \ @@ -62,7 +68,7 @@ static inline int ioapic_setup_disabled(void) { return 0; } #ifdef CONFIG_ACPI_PCI int acpi_noirq __initdata; /* skip ACPI IRQ initialization */ -int acpi_pci_disabled __initdata; /* skip ACPI PCI scan and IRQ initialization */ +int acpi_pci_disabled __initdata; /* skip ACPI PCI scan and IRQ initialization */ #else int acpi_noirq __initdata = 1; int acpi_pci_disabled __initdata = 1; @@ -88,7 +94,7 @@ static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE; #define MAX_MADT_ENTRIES 256 u8 x86_acpiid_to_apicid[MAX_MADT_ENTRIES] = - { [0 ... MAX_MADT_ENTRIES-1] = 0xff }; + {[0...MAX_MADT_ENTRIES - 1] = 0xff }; EXPORT_SYMBOL(x86_acpiid_to_apicid); /* -------------------------------------------------------------------------- @@ -99,7 +105,7 @@ EXPORT_SYMBOL(x86_acpiid_to_apicid); * The default interrupt routing model is PIC (8259). This gets * overriden if IOAPICs are enumerated (below). */ -enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC; +enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC; #ifdef CONFIG_X86_64 @@ -107,7 +113,7 @@ enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC; char *__acpi_map_table(unsigned long phys_addr, unsigned long size) { if (!phys_addr || !size) - return NULL; + return NULL; if (phys_addr < (end_pfn_map << PAGE_SHIFT)) return __va(phys_addr); @@ -134,8 +140,8 @@ char *__acpi_map_table(unsigned long phys, unsigned long size) unsigned long base, offset, mapped_size; int idx; - if (phys + size < 8*1024*1024) - return __va(phys); + if (phys + size < 8 * 1024 * 1024) + return __va(phys); offset = phys & (PAGE_SIZE - 1); mapped_size = PAGE_SIZE - offset; @@ -154,7 +160,7 @@ char *__acpi_map_table(unsigned long phys, unsigned long size) mapped_size += PAGE_SIZE; } - return ((unsigned char *) base + offset); + return ((unsigned char *)base + offset); } #endif @@ -172,7 +178,7 @@ int __init acpi_parse_mcfg(unsigned long phys_addr, unsigned long size) if (!phys_addr || !size) return -EINVAL; - mcfg = (struct acpi_table_mcfg *) __acpi_map_table(phys_addr, size); + mcfg = (struct acpi_table_mcfg *)__acpi_map_table(phys_addr, size); if (!mcfg) { printk(KERN_WARNING PREFIX "Unable to map MCFG\n"); return -ENODEV; @@ -209,20 +215,17 @@ int __init acpi_parse_mcfg(unsigned long phys_addr, unsigned long size) return 0; } -#endif /* CONFIG_PCI_MMCONFIG */ +#endif /* CONFIG_PCI_MMCONFIG */ #ifdef CONFIG_X86_LOCAL_APIC -static int __init -acpi_parse_madt ( - unsigned long phys_addr, - unsigned long size) +static int __init acpi_parse_madt(unsigned long phys_addr, unsigned long size) { - struct acpi_table_madt *madt = NULL; + struct acpi_table_madt *madt = NULL; if (!phys_addr || !size) return -EINVAL; - madt = (struct acpi_table_madt *) __acpi_map_table(phys_addr, size); + madt = (struct acpi_table_madt *)__acpi_map_table(phys_addr, size); if (!madt) { printk(KERN_WARNING PREFIX "Unable to map MADT\n"); return -ENODEV; @@ -232,22 +235,20 @@ acpi_parse_madt ( acpi_lapic_addr = (u64) madt->lapic_address; printk(KERN_DEBUG PREFIX "Local APIC address 0x%08x\n", - madt->lapic_address); + madt->lapic_address); } acpi_madt_oem_check(madt->header.oem_id, madt->header.oem_table_id); - + return 0; } - static int __init -acpi_parse_lapic ( - acpi_table_entry_header *header, const unsigned long end) +acpi_parse_lapic(acpi_table_entry_header * header, const unsigned long end) { - struct acpi_table_lapic *processor = NULL; + struct acpi_table_lapic *processor = NULL; - processor = (struct acpi_table_lapic*) header; + processor = (struct acpi_table_lapic *)header; if (BAD_MADT_ENTRY(processor, end)) return -EINVAL; @@ -260,20 +261,19 @@ acpi_parse_lapic ( x86_acpiid_to_apicid[processor->acpi_id] = processor->id; - mp_register_lapic ( - processor->id, /* APIC ID */ - processor->flags.enabled); /* Enabled? */ + mp_register_lapic(processor->id, /* APIC ID */ + processor->flags.enabled); /* Enabled? */ return 0; } static int __init -acpi_parse_lapic_addr_ovr ( - acpi_table_entry_header *header, const unsigned long end) +acpi_parse_lapic_addr_ovr(acpi_table_entry_header * header, + const unsigned long end) { struct acpi_table_lapic_addr_ovr *lapic_addr_ovr = NULL; - lapic_addr_ovr = (struct acpi_table_lapic_addr_ovr*) header; + lapic_addr_ovr = (struct acpi_table_lapic_addr_ovr *)header; if (BAD_MADT_ENTRY(lapic_addr_ovr, end)) return -EINVAL; @@ -284,12 +284,11 @@ acpi_parse_lapic_addr_ovr ( } static int __init -acpi_parse_lapic_nmi ( - acpi_table_entry_header *header, const unsigned long end) +acpi_parse_lapic_nmi(acpi_table_entry_header * header, const unsigned long end) { struct acpi_table_lapic_nmi *lapic_nmi = NULL; - lapic_nmi = (struct acpi_table_lapic_nmi*) header; + lapic_nmi = (struct acpi_table_lapic_nmi *)header; if (BAD_MADT_ENTRY(lapic_nmi, end)) return -EINVAL; @@ -302,37 +301,32 @@ acpi_parse_lapic_nmi ( return 0; } - -#endif /*CONFIG_X86_LOCAL_APIC*/ +#endif /*CONFIG_X86_LOCAL_APIC */ #if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_ACPI_INTERPRETER) static int __init -acpi_parse_ioapic ( - acpi_table_entry_header *header, const unsigned long end) +acpi_parse_ioapic(acpi_table_entry_header * header, const unsigned long end) { struct acpi_table_ioapic *ioapic = NULL; - ioapic = (struct acpi_table_ioapic*) header; + ioapic = (struct acpi_table_ioapic *)header; if (BAD_MADT_ENTRY(ioapic, end)) return -EINVAL; - + acpi_table_print_madt_entry(header); - mp_register_ioapic ( - ioapic->id, - ioapic->address, - ioapic->global_irq_base); - + mp_register_ioapic(ioapic->id, + ioapic->address, ioapic->global_irq_base); + return 0; } /* * Parse Interrupt Source Override for the ACPI SCI */ -static void -acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger) +static void acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger) { if (trigger == 0) /* compatible SCI trigger is level */ trigger = 3; @@ -348,7 +342,7 @@ acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger) polarity = acpi_sci_flags.polarity; /* - * mp_config_acpi_legacy_irqs() already setup IRQs < 16 + * mp_config_acpi_legacy_irqs() already setup IRQs < 16 * If GSI is < 16, this will update its flags, * else it will create a new mp_irqs[] entry. */ @@ -363,12 +357,12 @@ acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger) } static int __init -acpi_parse_int_src_ovr ( - acpi_table_entry_header *header, const unsigned long end) +acpi_parse_int_src_ovr(acpi_table_entry_header * header, + const unsigned long end) { struct acpi_table_int_src_ovr *intsrc = NULL; - intsrc = (struct acpi_table_int_src_ovr*) header; + intsrc = (struct acpi_table_int_src_ovr *)header; if (BAD_MADT_ENTRY(intsrc, end)) return -EINVAL; @@ -377,33 +371,30 @@ acpi_parse_int_src_ovr ( if (intsrc->bus_irq == acpi_fadt.sci_int) { acpi_sci_ioapic_setup(intsrc->global_irq, - intsrc->flags.polarity, intsrc->flags.trigger); + intsrc->flags.polarity, + intsrc->flags.trigger); return 0; } if (acpi_skip_timer_override && - intsrc->bus_irq == 0 && intsrc->global_irq == 2) { - printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n"); - return 0; + intsrc->bus_irq == 0 && intsrc->global_irq == 2) { + printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n"); + return 0; } - mp_override_legacy_irq ( - intsrc->bus_irq, - intsrc->flags.polarity, - intsrc->flags.trigger, - intsrc->global_irq); + mp_override_legacy_irq(intsrc->bus_irq, + intsrc->flags.polarity, + intsrc->flags.trigger, intsrc->global_irq); return 0; } - static int __init -acpi_parse_nmi_src ( - acpi_table_entry_header *header, const unsigned long end) +acpi_parse_nmi_src(acpi_table_entry_header * header, const unsigned long end) { struct acpi_table_nmi_src *nmi_src = NULL; - nmi_src = (struct acpi_table_nmi_src*) header; + nmi_src = (struct acpi_table_nmi_src *)header; if (BAD_MADT_ENTRY(nmi_src, end)) return -EINVAL; @@ -415,7 +406,7 @@ acpi_parse_nmi_src ( return 0; } -#endif /* CONFIG_X86_IO_APIC */ +#endif /* CONFIG_X86_IO_APIC */ #ifdef CONFIG_ACPI_BUS @@ -433,8 +424,7 @@ acpi_parse_nmi_src ( * ECLR2 is IRQ's 8-15 (IRQ 8, 13 must be 0) */ -void __init -acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger) +void __init acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger) { unsigned int mask = 1 << irq; unsigned int old, new; @@ -454,10 +444,10 @@ acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger) * routing tables.. */ switch (trigger) { - case 1: /* Edge - clear */ + case 1: /* Edge - clear */ new &= ~mask; break; - case 3: /* Level - set */ + case 3: /* Level - set */ new |= mask; break; } @@ -470,14 +460,13 @@ acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger) outb(new >> 8, 0x4d1); } - -#endif /* CONFIG_ACPI_BUS */ +#endif /* CONFIG_ACPI_BUS */ int acpi_gsi_to_irq(u32 gsi, unsigned int *irq) { #ifdef CONFIG_X86_IO_APIC if (use_pci_vector() && !platform_legacy_irq(gsi)) - *irq = IO_APIC_VECTOR(gsi); + *irq = IO_APIC_VECTOR(gsi); else #endif *irq = gsi; @@ -501,7 +490,7 @@ int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low) extern void eisa_set_level_irq(unsigned int irq); if (edge_level == ACPI_LEVEL_SENSITIVE) - eisa_set_level_irq(gsi); + eisa_set_level_irq(gsi); } #endif @@ -513,60 +502,58 @@ int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low) acpi_gsi_to_irq(plat_gsi, &irq); return irq; } + EXPORT_SYMBOL(acpi_register_gsi); /* * ACPI based hotplug support for CPU */ #ifdef CONFIG_ACPI_HOTPLUG_CPU -int -acpi_map_lsapic(acpi_handle handle, int *pcpu) +int acpi_map_lsapic(acpi_handle handle, int *pcpu) { /* TBD */ return -EINVAL; } -EXPORT_SYMBOL(acpi_map_lsapic); +EXPORT_SYMBOL(acpi_map_lsapic); -int -acpi_unmap_lsapic(int cpu) +int acpi_unmap_lsapic(int cpu) { /* TBD */ return -EINVAL; } + EXPORT_SYMBOL(acpi_unmap_lsapic); -#endif /* CONFIG_ACPI_HOTPLUG_CPU */ +#endif /* CONFIG_ACPI_HOTPLUG_CPU */ -int -acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base) +int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base) { /* TBD */ return -EINVAL; } + EXPORT_SYMBOL(acpi_register_ioapic); -int -acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base) +int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base) { /* TBD */ return -EINVAL; } + EXPORT_SYMBOL(acpi_unregister_ioapic); static unsigned long __init -acpi_scan_rsdp ( - unsigned long start, - unsigned long length) +acpi_scan_rsdp(unsigned long start, unsigned long length) { - unsigned long offset = 0; - unsigned long sig_len = sizeof("RSD PTR ") - 1; + unsigned long offset = 0; + unsigned long sig_len = sizeof("RSD PTR ") - 1; /* * Scan all 16-byte boundaries of the physical memory region for the * RSDP signature. */ for (offset = 0; offset < length; offset += 16) { - if (strncmp((char *) (start + offset), "RSD PTR ", sig_len)) + if (strncmp((char *)(start + offset), "RSD PTR ", sig_len)) continue; return (start + offset); } @@ -579,20 +566,19 @@ static int __init acpi_parse_sbf(unsigned long phys_addr, unsigned long size) struct acpi_table_sbf *sb; if (!phys_addr || !size) - return -EINVAL; + return -EINVAL; - sb = (struct acpi_table_sbf *) __acpi_map_table(phys_addr, size); + sb = (struct acpi_table_sbf *)__acpi_map_table(phys_addr, size); if (!sb) { printk(KERN_WARNING PREFIX "Unable to map SBF\n"); return -ENODEV; } - sbf_port = sb->sbf_cmos; /* Save CMOS port */ + sbf_port = sb->sbf_cmos; /* Save CMOS port */ return 0; } - #ifdef CONFIG_HPET_TIMER static int __init acpi_parse_hpet(unsigned long phys, unsigned long size) @@ -602,7 +588,7 @@ static int __init acpi_parse_hpet(unsigned long phys, unsigned long size) if (!phys || !size) return -EINVAL; - hpet_tbl = (struct acpi_table_hpet *) __acpi_map_table(phys, size); + hpet_tbl = (struct acpi_table_hpet *)__acpi_map_table(phys, size); if (!hpet_tbl) { printk(KERN_WARNING PREFIX "Unable to map HPET\n"); return -ENODEV; @@ -613,22 +599,21 @@ static int __init acpi_parse_hpet(unsigned long phys, unsigned long size) "memory.\n"); return -1; } - #ifdef CONFIG_X86_64 - vxtime.hpet_address = hpet_tbl->addr.addrl | - ((long) hpet_tbl->addr.addrh << 32); + vxtime.hpet_address = hpet_tbl->addr.addrl | + ((long)hpet_tbl->addr.addrh << 32); - printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n", - hpet_tbl->id, vxtime.hpet_address); -#else /* X86 */ + printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n", + hpet_tbl->id, vxtime.hpet_address); +#else /* X86 */ { extern unsigned long hpet_address; hpet_address = hpet_tbl->addr.addrl; printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n", - hpet_tbl->id, hpet_address); + hpet_tbl->id, hpet_address); } -#endif /* X86 */ +#endif /* X86 */ return 0; } @@ -644,12 +629,11 @@ static int __init acpi_parse_fadt(unsigned long phys, unsigned long size) { struct fadt_descriptor_rev2 *fadt = NULL; - fadt = (struct fadt_descriptor_rev2*) __acpi_map_table(phys,size); - if(!fadt) { + fadt = (struct fadt_descriptor_rev2 *)__acpi_map_table(phys, size); + if (!fadt) { printk(KERN_WARNING PREFIX "Unable to map FADT\n"); return 0; } - #ifdef CONFIG_ACPI_INTERPRETER /* initialize sci_int early for INT_SRC_OVR MADT parsing */ acpi_fadt.sci_int = fadt->sci_int; @@ -658,14 +642,16 @@ static int __init acpi_parse_fadt(unsigned long phys, unsigned long size) #ifdef CONFIG_ACPI_BUS /* initialize rev and apic_phys_dest_mode for x86_64 genapic */ acpi_fadt.revision = fadt->revision; - acpi_fadt.force_apic_physical_destination_mode = fadt->force_apic_physical_destination_mode; + acpi_fadt.force_apic_physical_destination_mode = + fadt->force_apic_physical_destination_mode; #endif #ifdef CONFIG_X86_PM_TIMER /* detect the location of the ACPI PM Timer */ if (fadt->revision >= FADT2_REVISION_ID) { /* FADT rev. 2 */ - if (fadt->xpm_tmr_blk.address_space_id != ACPI_ADR_SPACE_SYSTEM_IO) + if (fadt->xpm_tmr_blk.address_space_id != + ACPI_ADR_SPACE_SYSTEM_IO) return 0; pmtmr_ioport = fadt->xpm_tmr_blk.address; @@ -674,16 +660,15 @@ static int __init acpi_parse_fadt(unsigned long phys, unsigned long size) pmtmr_ioport = fadt->V1_pm_tmr_blk; } if (pmtmr_ioport) - printk(KERN_INFO PREFIX "PM-Timer IO Port: %#x\n", pmtmr_ioport); + printk(KERN_INFO PREFIX "PM-Timer IO Port: %#x\n", + pmtmr_ioport); #endif return 0; } - -unsigned long __init -acpi_find_rsdp (void) +unsigned long __init acpi_find_rsdp(void) { - unsigned long rsdp_phys = 0; + unsigned long rsdp_phys = 0; if (efi_enabled) { if (efi.acpi20) @@ -695,9 +680,9 @@ acpi_find_rsdp (void) * Scan memory looking for the RSDP signature. First search EBDA (low * memory) paragraphs and then search upper memory (E0000-FFFFF). */ - rsdp_phys = acpi_scan_rsdp (0, 0x400); + rsdp_phys = acpi_scan_rsdp(0, 0x400); if (!rsdp_phys) - rsdp_phys = acpi_scan_rsdp (0xE0000, 0x20000); + rsdp_phys = acpi_scan_rsdp(0xE0000, 0x20000); return rsdp_phys; } @@ -707,8 +692,7 @@ acpi_find_rsdp (void) * Parse LAPIC entries in MADT * returns 0 on success, < 0 on error */ -static int __init -acpi_parse_madt_lapic_entries(void) +static int __init acpi_parse_madt_lapic_entries(void) { int count; @@ -717,28 +701,31 @@ acpi_parse_madt_lapic_entries(void) * and (optionally) overriden by a LAPIC_ADDR_OVR entry (64-bit value). */ - count = acpi_table_parse_madt(ACPI_MADT_LAPIC_ADDR_OVR, acpi_parse_lapic_addr_ovr, 0); + count = + acpi_table_parse_madt(ACPI_MADT_LAPIC_ADDR_OVR, + acpi_parse_lapic_addr_ovr, 0); if (count < 0) { - printk(KERN_ERR PREFIX "Error parsing LAPIC address override entry\n"); + printk(KERN_ERR PREFIX + "Error parsing LAPIC address override entry\n"); return count; } mp_register_lapic_address(acpi_lapic_addr); count = acpi_table_parse_madt(ACPI_MADT_LAPIC, acpi_parse_lapic, - MAX_APICS); - if (!count) { + MAX_APICS); + if (!count) { printk(KERN_ERR PREFIX "No LAPIC entries present\n"); /* TBD: Cleanup to allow fallback to MPS */ return -ENODEV; - } - else if (count < 0) { + } else if (count < 0) { printk(KERN_ERR PREFIX "Error parsing LAPIC entry\n"); /* TBD: Cleanup to allow fallback to MPS */ return count; } - count = acpi_table_parse_madt(ACPI_MADT_LAPIC_NMI, acpi_parse_lapic_nmi, 0); + count = + acpi_table_parse_madt(ACPI_MADT_LAPIC_NMI, acpi_parse_lapic_nmi, 0); if (count < 0) { printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n"); /* TBD: Cleanup to allow fallback to MPS */ @@ -746,15 +733,14 @@ acpi_parse_madt_lapic_entries(void) } return 0; } -#endif /* CONFIG_X86_LOCAL_APIC */ +#endif /* CONFIG_X86_LOCAL_APIC */ #if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_ACPI_INTERPRETER) /* * Parse IOAPIC related entries in MADT * returns 0 on success, < 0 on error */ -static int __init -acpi_parse_madt_ioapic_entries(void) +static int __init acpi_parse_madt_ioapic_entries(void) { int count; @@ -766,30 +752,34 @@ acpi_parse_madt_ioapic_entries(void) */ if (acpi_disabled || acpi_noirq) { return -ENODEV; - } + } /* - * if "noapic" boot option, don't look for IO-APICs + * if "noapic" boot option, don't look for IO-APICs */ if (skip_ioapic_setup) { printk(KERN_INFO PREFIX "Skipping IOAPIC probe " - "due to 'noapic' option.\n"); + "due to 'noapic' option.\n"); return -ENODEV; } - count = acpi_table_parse_madt(ACPI_MADT_IOAPIC, acpi_parse_ioapic, MAX_IO_APICS); + count = + acpi_table_parse_madt(ACPI_MADT_IOAPIC, acpi_parse_ioapic, + MAX_IO_APICS); if (!count) { printk(KERN_ERR PREFIX "No IOAPIC entries present\n"); return -ENODEV; - } - else if (count < 0) { + } else if (count < 0) { printk(KERN_ERR PREFIX "Error parsing IOAPIC entry\n"); return count; } - count = acpi_table_parse_madt(ACPI_MADT_INT_SRC_OVR, acpi_parse_int_src_ovr, NR_IRQ_VECTORS); + count = + acpi_table_parse_madt(ACPI_MADT_INT_SRC_OVR, acpi_parse_int_src_ovr, + NR_IRQ_VECTORS); if (count < 0) { - printk(KERN_ERR PREFIX "Error parsing interrupt source overrides entry\n"); + printk(KERN_ERR PREFIX + "Error parsing interrupt source overrides entry\n"); /* TBD: Cleanup to allow fallback to MPS */ return count; } @@ -804,7 +794,9 @@ acpi_parse_madt_ioapic_entries(void) /* Fill in identity legacy mapings where no override */ mp_config_acpi_legacy_irqs(); - count = acpi_table_parse_madt(ACPI_MADT_NMI_SRC, acpi_parse_nmi_src, NR_IRQ_VECTORS); + count = + acpi_table_parse_madt(ACPI_MADT_NMI_SRC, acpi_parse_nmi_src, + NR_IRQ_VECTORS); if (count < 0) { printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n"); /* TBD: Cleanup to allow fallback to MPS */ @@ -818,11 +810,9 @@ static inline int acpi_parse_madt_ioapic_entries(void) { return -1; } -#endif /* !(CONFIG_X86_IO_APIC && CONFIG_ACPI_INTERPRETER) */ - +#endif /* !(CONFIG_X86_IO_APIC && CONFIG_ACPI_INTERPRETER) */ -static void __init -acpi_process_madt(void) +static void __init acpi_process_madt(void) { #ifdef CONFIG_X86_LOCAL_APIC int count, error; @@ -854,7 +844,8 @@ acpi_process_madt(void) /* * Dell Precision Workstation 410, 610 come here. */ - printk(KERN_ERR PREFIX "Invalid BIOS MADT, disabling ACPI\n"); + printk(KERN_ERR PREFIX + "Invalid BIOS MADT, disabling ACPI\n"); disable_acpi(); } } @@ -891,7 +882,7 @@ static int __init disable_acpi_pci(struct dmi_system_id *d) static int __init dmi_disable_acpi(struct dmi_system_id *d) { if (!acpi_force) { - printk(KERN_NOTICE "%s detected: acpi off\n",d->ident); + printk(KERN_NOTICE "%s detected: acpi off\n", d->ident); disable_acpi(); } else { printk(KERN_NOTICE @@ -906,7 +897,8 @@ static int __init dmi_disable_acpi(struct dmi_system_id *d) static int __init force_acpi_ht(struct dmi_system_id *d) { if (!acpi_force) { - printk(KERN_NOTICE "%s detected: force use of acpi=ht\n", d->ident); + printk(KERN_NOTICE "%s detected: force use of acpi=ht\n", + d->ident); disable_acpi(); acpi_ht = 1; } else { @@ -925,155 +917,157 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = { * Boxes that need ACPI disabled */ { - .callback = dmi_disable_acpi, - .ident = "IBM Thinkpad", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), - DMI_MATCH(DMI_BOARD_NAME, "2629H1G"), - }, - }, + .callback = dmi_disable_acpi, + .ident = "IBM Thinkpad", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), + DMI_MATCH(DMI_BOARD_NAME, "2629H1G"), + }, + }, /* * Boxes that need acpi=ht */ { - .callback = force_acpi_ht, - .ident = "FSC Primergy T850", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), - DMI_MATCH(DMI_PRODUCT_NAME, "PRIMERGY T850"), - }, - }, + .callback = force_acpi_ht, + .ident = "FSC Primergy T850", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "PRIMERGY T850"), + }, + }, { - .callback = force_acpi_ht, - .ident = "DELL GX240", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "Dell Computer Corporation"), - DMI_MATCH(DMI_BOARD_NAME, "OptiPlex GX240"), - }, - }, + .callback = force_acpi_ht, + .ident = "DELL GX240", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Dell Computer Corporation"), + DMI_MATCH(DMI_BOARD_NAME, "OptiPlex GX240"), + }, + }, { - .callback = force_acpi_ht, - .ident = "HP VISUALIZE NT Workstation", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"), - DMI_MATCH(DMI_PRODUCT_NAME, "HP VISUALIZE NT Workstation"), - }, - }, + .callback = force_acpi_ht, + .ident = "HP VISUALIZE NT Workstation", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP VISUALIZE NT Workstation"), + }, + }, { - .callback = force_acpi_ht, - .ident = "Compaq Workstation W8000", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Compaq"), - DMI_MATCH(DMI_PRODUCT_NAME, "Workstation W8000"), - }, - }, + .callback = force_acpi_ht, + .ident = "Compaq Workstation W8000", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Compaq"), + DMI_MATCH(DMI_PRODUCT_NAME, "Workstation W8000"), + }, + }, { - .callback = force_acpi_ht, - .ident = "ASUS P4B266", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), - DMI_MATCH(DMI_BOARD_NAME, "P4B266"), - }, - }, + .callback = force_acpi_ht, + .ident = "ASUS P4B266", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "P4B266"), + }, + }, { - .callback = force_acpi_ht, - .ident = "ASUS P2B-DS", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), - DMI_MATCH(DMI_BOARD_NAME, "P2B-DS"), - }, - }, + .callback = force_acpi_ht, + .ident = "ASUS P2B-DS", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "P2B-DS"), + }, + }, { - .callback = force_acpi_ht, - .ident = "ASUS CUR-DLS", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), - DMI_MATCH(DMI_BOARD_NAME, "CUR-DLS"), - }, - }, + .callback = force_acpi_ht, + .ident = "ASUS CUR-DLS", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "CUR-DLS"), + }, + }, { - .callback = force_acpi_ht, - .ident = "ABIT i440BX-W83977", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ABIT "), - DMI_MATCH(DMI_BOARD_NAME, "i440BX-W83977 (BP6)"), - }, - }, + .callback = force_acpi_ht, + .ident = "ABIT i440BX-W83977", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ABIT "), + DMI_MATCH(DMI_BOARD_NAME, "i440BX-W83977 (BP6)"), + }, + }, { - .callback = force_acpi_ht, - .ident = "IBM Bladecenter", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), - DMI_MATCH(DMI_BOARD_NAME, "IBM eServer BladeCenter HS20"), - }, - }, + .callback = force_acpi_ht, + .ident = "IBM Bladecenter", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), + DMI_MATCH(DMI_BOARD_NAME, "IBM eServer BladeCenter HS20"), + }, + }, { - .callback = force_acpi_ht, - .ident = "IBM eServer xSeries 360", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), - DMI_MATCH(DMI_BOARD_NAME, "eServer xSeries 360"), - }, - }, + .callback = force_acpi_ht, + .ident = "IBM eServer xSeries 360", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), + DMI_MATCH(DMI_BOARD_NAME, "eServer xSeries 360"), + }, + }, { - .callback = force_acpi_ht, - .ident = "IBM eserver xSeries 330", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), - DMI_MATCH(DMI_BOARD_NAME, "eserver xSeries 330"), - }, - }, + .callback = force_acpi_ht, + .ident = "IBM eserver xSeries 330", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), + DMI_MATCH(DMI_BOARD_NAME, "eserver xSeries 330"), + }, + }, { - .callback = force_acpi_ht, - .ident = "IBM eserver xSeries 440", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), - DMI_MATCH(DMI_PRODUCT_NAME, "eserver xSeries 440"), - }, - }, + .callback = force_acpi_ht, + .ident = "IBM eserver xSeries 440", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), + DMI_MATCH(DMI_PRODUCT_NAME, "eserver xSeries 440"), + }, + }, #ifdef CONFIG_ACPI_PCI /* * Boxes that need ACPI PCI IRQ routing disabled */ { - .callback = disable_acpi_irq, - .ident = "ASUS A7V", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC"), - DMI_MATCH(DMI_BOARD_NAME, ""), - /* newer BIOS, Revision 1011, does work */ - DMI_MATCH(DMI_BIOS_VERSION, "ASUS A7V ACPI BIOS Revision 1007"), - }, - }, + .callback = disable_acpi_irq, + .ident = "ASUS A7V", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC"), + DMI_MATCH(DMI_BOARD_NAME, ""), + /* newer BIOS, Revision 1011, does work */ + DMI_MATCH(DMI_BIOS_VERSION, + "ASUS A7V ACPI BIOS Revision 1007"), + }, + }, /* * Boxes that need ACPI PCI IRQ routing and PCI scan disabled */ - { /* _BBN 0 bug */ - .callback = disable_acpi_pci, - .ident = "ASUS PR-DLS", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), - DMI_MATCH(DMI_BOARD_NAME, "PR-DLS"), - DMI_MATCH(DMI_BIOS_VERSION, "ASUS PR-DLS ACPI BIOS Revision 1010"), - DMI_MATCH(DMI_BIOS_DATE, "03/21/2003") - }, - }, + { /* _BBN 0 bug */ + .callback = disable_acpi_pci, + .ident = "ASUS PR-DLS", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "PR-DLS"), + DMI_MATCH(DMI_BIOS_VERSION, + "ASUS PR-DLS ACPI BIOS Revision 1010"), + DMI_MATCH(DMI_BIOS_DATE, "03/21/2003") + }, + }, { - .callback = disable_acpi_pci, - .ident = "Acer TravelMate 36x Laptop", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Acer"), - DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"), - }, - }, + .callback = disable_acpi_pci, + .ident = "Acer TravelMate 36x Laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"), + }, + }, #endif - { } + {} }; -#endif /* __i386__ */ +#endif /* __i386__ */ /* * acpi_boot_table_init() and acpi_boot_init() @@ -1098,8 +1092,7 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = { * !0: failure */ -int __init -acpi_boot_table_init(void) +int __init acpi_boot_table_init(void) { int error; @@ -1112,7 +1105,7 @@ acpi_boot_table_init(void) * One exception: acpi=ht continues far enough to enumerate LAPICs */ if (acpi_disabled && !acpi_ht) - return 1; + return 1; /* * Initialize the ACPI boot-time table parser. @@ -1122,7 +1115,6 @@ acpi_boot_table_init(void) disable_acpi(); return error; } - #ifdef __i386__ check_acpi_pci(); #endif @@ -1146,7 +1138,6 @@ acpi_boot_table_init(void) return 0; } - int __init acpi_boot_init(void) { /* @@ -1154,7 +1145,7 @@ int __init acpi_boot_init(void) * One exception: acpi=ht continues far enough to enumerate LAPICs */ if (acpi_disabled && !acpi_ht) - return 1; + return 1; acpi_table_parse(ACPI_BOOT, acpi_parse_sbf); @@ -1172,4 +1163,3 @@ int __init acpi_boot_init(void) return 0; } - diff --git a/arch/i386/kernel/acpi/earlyquirk.c b/arch/i386/kernel/acpi/earlyquirk.c index 726a5ca4b165..f1b9d2a46dab 100644 --- a/arch/i386/kernel/acpi/earlyquirk.c +++ b/arch/i386/kernel/acpi/earlyquirk.c @@ -8,44 +8,44 @@ #include #include -static int __init check_bridge(int vendor, int device) +static int __init check_bridge(int vendor, int device) { /* According to Nvidia all timer overrides are bogus. Just ignore them all. */ - if (vendor == PCI_VENDOR_ID_NVIDIA) { - acpi_skip_timer_override = 1; + if (vendor == PCI_VENDOR_ID_NVIDIA) { + acpi_skip_timer_override = 1; } return 0; } - -void __init check_acpi_pci(void) -{ - int num,slot,func; + +void __init check_acpi_pci(void) +{ + int num, slot, func; /* Assume the machine supports type 1. If not it will always read ffffffff and should not have any side effect. */ /* Poor man's PCI discovery */ - for (num = 0; num < 32; num++) { - for (slot = 0; slot < 32; slot++) { - for (func = 0; func < 8; func++) { + for (num = 0; num < 32; num++) { + for (slot = 0; slot < 32; slot++) { + for (func = 0; func < 8; func++) { u32 class; u32 vendor; - class = read_pci_config(num,slot,func, + class = read_pci_config(num, slot, func, PCI_CLASS_REVISION); if (class == 0xffffffff) - break; + break; if ((class >> 16) != PCI_CLASS_BRIDGE_PCI) - continue; - - vendor = read_pci_config(num, slot, func, + continue; + + vendor = read_pci_config(num, slot, func, PCI_VENDOR_ID); - - if (check_bridge(vendor&0xffff, vendor >> 16)) - return; - } - + + if (check_bridge(vendor & 0xffff, vendor >> 16)) + return; + } + } } } diff --git a/arch/i386/kernel/acpi/sleep.c b/arch/i386/kernel/acpi/sleep.c index c1af93032ff3..1cb2b186a3af 100644 --- a/arch/i386/kernel/acpi/sleep.c +++ b/arch/i386/kernel/acpi/sleep.c @@ -20,12 +20,13 @@ extern void zap_low_mappings(void); extern unsigned long FASTCALL(acpi_copy_wakeup_routine(unsigned long)); -static void init_low_mapping(pgd_t *pgd, int pgd_limit) +static void init_low_mapping(pgd_t * pgd, int pgd_limit) { int pgd_ofs = 0; - while ((pgd_ofs < pgd_limit) && (pgd_ofs + USER_PTRS_PER_PGD < PTRS_PER_PGD)) { - set_pgd(pgd, *(pgd+USER_PTRS_PER_PGD)); + while ((pgd_ofs < pgd_limit) + && (pgd_ofs + USER_PTRS_PER_PGD < PTRS_PER_PGD)) { + set_pgd(pgd, *(pgd + USER_PTRS_PER_PGD)); pgd_ofs++, pgd++; } flush_tlb_all(); @@ -37,12 +38,13 @@ static void init_low_mapping(pgd_t *pgd, int pgd_limit) * Create an identity mapped page table and copy the wakeup routine to * low memory. */ -int acpi_save_state_mem (void) +int acpi_save_state_mem(void) { if (!acpi_wakeup_address) return 1; init_low_mapping(swapper_pg_dir, USER_PTRS_PER_PGD); - memcpy((void *) acpi_wakeup_address, &wakeup_start, &wakeup_end - &wakeup_start); + memcpy((void *)acpi_wakeup_address, &wakeup_start, + &wakeup_end - &wakeup_start); acpi_copy_wakeup_routine(acpi_wakeup_address); return 0; @@ -51,7 +53,7 @@ int acpi_save_state_mem (void) /* * acpi_restore_state - undo effects of acpi_save_state_mem */ -void acpi_restore_state_mem (void) +void acpi_restore_state_mem(void) { zap_low_mappings(); } @@ -67,7 +69,8 @@ void acpi_restore_state_mem (void) void __init acpi_reserve_bootmem(void) { if ((&wakeup_end - &wakeup_start) > PAGE_SIZE) { - printk(KERN_ERR "ACPI: Wakeup code way too big, S3 disabled.\n"); + printk(KERN_ERR + "ACPI: Wakeup code way too big, S3 disabled.\n"); return; } @@ -90,10 +93,8 @@ static int __init acpi_sleep_setup(char *str) return 1; } - __setup("acpi_sleep=", acpi_sleep_setup); - static __init int reset_videomode_after_s3(struct dmi_system_id *d) { acpi_video_flags |= 2; @@ -101,14 +102,14 @@ static __init int reset_videomode_after_s3(struct dmi_system_id *d) } static __initdata struct dmi_system_id acpisleep_dmi_table[] = { - { /* Reset video mode after returning from ACPI S3 sleep */ - .callback = reset_videomode_after_s3, - .ident = "Toshiba Satellite 4030cdt", - .matches = { - DMI_MATCH(DMI_PRODUCT_NAME, "S4030CDT/4.3"), - }, - }, - { } + { /* Reset video mode after returning from ACPI S3 sleep */ + .callback = reset_videomode_after_s3, + .ident = "Toshiba Satellite 4030cdt", + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "S4030CDT/4.3"), + }, + }, + {} }; static int __init acpisleep_dmi_init(void) diff --git a/arch/ia64/kernel/acpi-ext.c b/arch/ia64/kernel/acpi-ext.c index 2623df5e2633..13a5b3b49bf8 100644 --- a/arch/ia64/kernel/acpi-ext.c +++ b/arch/ia64/kernel/acpi-ext.c @@ -17,20 +17,20 @@ #include struct acpi_vendor_descriptor { - u8 guid_id; - efi_guid_t guid; + u8 guid_id; + efi_guid_t guid; }; struct acpi_vendor_info { - struct acpi_vendor_descriptor *descriptor; - u8 *data; - u32 length; + struct acpi_vendor_descriptor *descriptor; + u8 *data; + u32 length; }; acpi_status acpi_vendor_resource_match(struct acpi_resource *resource, void *context) { - struct acpi_vendor_info *info = (struct acpi_vendor_info *) context; + struct acpi_vendor_info *info = (struct acpi_vendor_info *)context; struct acpi_resource_vendor *vendor; struct acpi_vendor_descriptor *descriptor; u32 length; @@ -38,8 +38,8 @@ acpi_vendor_resource_match(struct acpi_resource *resource, void *context) if (resource->id != ACPI_RSTYPE_VENDOR) return AE_OK; - vendor = (struct acpi_resource_vendor *) &resource->data; - descriptor = (struct acpi_vendor_descriptor *) vendor->reserved; + vendor = (struct acpi_resource_vendor *)&resource->data; + descriptor = (struct acpi_vendor_descriptor *)vendor->reserved; if (vendor->length <= sizeof(*info->descriptor) || descriptor->guid_id != info->descriptor->guid_id || efi_guidcmp(descriptor->guid, info->descriptor->guid)) @@ -50,21 +50,24 @@ acpi_vendor_resource_match(struct acpi_resource *resource, void *context) if (!info->data) return AE_NO_MEMORY; - memcpy(info->data, vendor->reserved + sizeof(struct acpi_vendor_descriptor), length); + memcpy(info->data, + vendor->reserved + sizeof(struct acpi_vendor_descriptor), + length); info->length = length; return AE_CTRL_TERMINATE; } acpi_status -acpi_find_vendor_resource(acpi_handle obj, struct acpi_vendor_descriptor *id, - u8 **data, u32 *length) +acpi_find_vendor_resource(acpi_handle obj, struct acpi_vendor_descriptor * id, + u8 ** data, u32 * length) { struct acpi_vendor_info info; info.descriptor = id; info.data = NULL; - acpi_walk_resources(obj, METHOD_NAME__CRS, acpi_vendor_resource_match, &info); + acpi_walk_resources(obj, METHOD_NAME__CRS, acpi_vendor_resource_match, + &info); if (!info.data) return AE_NOT_FOUND; @@ -75,17 +78,19 @@ acpi_find_vendor_resource(acpi_handle obj, struct acpi_vendor_descriptor *id, struct acpi_vendor_descriptor hp_ccsr_descriptor = { .guid_id = 2, - .guid = EFI_GUID(0x69e9adf9, 0x924f, 0xab5f, 0xf6, 0x4a, 0x24, 0xd2, 0x01, 0x37, 0x0e, 0xad) + .guid = + EFI_GUID(0x69e9adf9, 0x924f, 0xab5f, 0xf6, 0x4a, 0x24, 0xd2, 0x01, + 0x37, 0x0e, 0xad) }; -acpi_status -hp_acpi_csr_space(acpi_handle obj, u64 *csr_base, u64 *csr_length) +acpi_status hp_acpi_csr_space(acpi_handle obj, u64 * csr_base, u64 * csr_length) { acpi_status status; u8 *data; u32 length; - status = acpi_find_vendor_resource(obj, &hp_ccsr_descriptor, &data, &length); + status = + acpi_find_vendor_resource(obj, &hp_ccsr_descriptor, &data, &length); if (ACPI_FAILURE(status) || length != 16) return AE_NOT_FOUND; diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index d362ecf5381b..f3046bdd4b14 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -74,12 +74,11 @@ unsigned int acpi_cpei_override; unsigned int acpi_cpei_phys_cpuid; #define MAX_SAPICS 256 -u16 ia64_acpiid_to_sapicid[MAX_SAPICS] = - { [0 ... MAX_SAPICS - 1] = -1 }; +u16 ia64_acpiid_to_sapicid[MAX_SAPICS] = {[0...MAX_SAPICS - 1] = -1 }; + EXPORT_SYMBOL(ia64_acpiid_to_sapicid); -const char * -acpi_get_sysname (void) +const char *acpi_get_sysname(void) { #ifdef CONFIG_IA64_GENERIC unsigned long rsdp_phys; @@ -89,27 +88,29 @@ acpi_get_sysname (void) rsdp_phys = acpi_find_rsdp(); if (!rsdp_phys) { - printk(KERN_ERR "ACPI 2.0 RSDP not found, default to \"dig\"\n"); + printk(KERN_ERR + "ACPI 2.0 RSDP not found, default to \"dig\"\n"); return "dig"; } - rsdp = (struct acpi20_table_rsdp *) __va(rsdp_phys); + rsdp = (struct acpi20_table_rsdp *)__va(rsdp_phys); if (strncmp(rsdp->signature, RSDP_SIG, sizeof(RSDP_SIG) - 1)) { - printk(KERN_ERR "ACPI 2.0 RSDP signature incorrect, default to \"dig\"\n"); + printk(KERN_ERR + "ACPI 2.0 RSDP signature incorrect, default to \"dig\"\n"); return "dig"; } - xsdt = (struct acpi_table_xsdt *) __va(rsdp->xsdt_address); + xsdt = (struct acpi_table_xsdt *)__va(rsdp->xsdt_address); hdr = &xsdt->header; if (strncmp(hdr->signature, XSDT_SIG, sizeof(XSDT_SIG) - 1)) { - printk(KERN_ERR "ACPI 2.0 XSDT signature incorrect, default to \"dig\"\n"); + printk(KERN_ERR + "ACPI 2.0 XSDT signature incorrect, default to \"dig\"\n"); return "dig"; } if (!strcmp(hdr->oem_id, "HP")) { return "hpzx1"; - } - else if (!strcmp(hdr->oem_id, "SGI")) { + } else if (!strcmp(hdr->oem_id, "SGI")) { return "sn2"; } @@ -137,7 +138,7 @@ acpi_get_sysname (void) /* Array to record platform interrupt vectors for generic interrupt routing. */ int platform_intr_list[ACPI_MAX_PLATFORM_INTERRUPTS] = { - [0 ... ACPI_MAX_PLATFORM_INTERRUPTS - 1] = -1 + [0...ACPI_MAX_PLATFORM_INTERRUPTS - 1] = -1 }; enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_IOSAPIC; @@ -146,8 +147,7 @@ enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_IOSAPIC; * Interrupt routing API for device drivers. Provides interrupt vector for * a generic platform event. Currently only CPEI is implemented. */ -int -acpi_request_vector (u32 int_type) +int acpi_request_vector(u32 int_type) { int vector = -1; @@ -155,12 +155,12 @@ acpi_request_vector (u32 int_type) /* corrected platform error interrupt */ vector = platform_intr_list[int_type]; } else - printk(KERN_ERR "acpi_request_vector(): invalid interrupt type\n"); + printk(KERN_ERR + "acpi_request_vector(): invalid interrupt type\n"); return vector; } -char * -__acpi_map_table (unsigned long phys_addr, unsigned long size) +char *__acpi_map_table(unsigned long phys_addr, unsigned long size) { return __va(phys_addr); } @@ -169,19 +169,18 @@ __acpi_map_table (unsigned long phys_addr, unsigned long size) Boot-time Table Parsing -------------------------------------------------------------------------- */ -static int total_cpus __initdata; -static int available_cpus __initdata; -struct acpi_table_madt * acpi_madt __initdata; -static u8 has_8259; - +static int total_cpus __initdata; +static int available_cpus __initdata; +struct acpi_table_madt *acpi_madt __initdata; +static u8 has_8259; static int __init -acpi_parse_lapic_addr_ovr ( - acpi_table_entry_header *header, const unsigned long end) +acpi_parse_lapic_addr_ovr(acpi_table_entry_header * header, + const unsigned long end) { struct acpi_table_lapic_addr_ovr *lapic; - lapic = (struct acpi_table_lapic_addr_ovr *) header; + lapic = (struct acpi_table_lapic_addr_ovr *)header; if (BAD_MADT_ENTRY(lapic, end)) return -EINVAL; @@ -193,22 +192,23 @@ acpi_parse_lapic_addr_ovr ( return 0; } - static int __init -acpi_parse_lsapic (acpi_table_entry_header *header, const unsigned long end) +acpi_parse_lsapic(acpi_table_entry_header * header, const unsigned long end) { struct acpi_table_lsapic *lsapic; - lsapic = (struct acpi_table_lsapic *) header; + lsapic = (struct acpi_table_lsapic *)header; if (BAD_MADT_ENTRY(lsapic, end)) return -EINVAL; if (lsapic->flags.enabled) { #ifdef CONFIG_SMP - smp_boot_data.cpu_phys_id[available_cpus] = (lsapic->id << 8) | lsapic->eid; + smp_boot_data.cpu_phys_id[available_cpus] = + (lsapic->id << 8) | lsapic->eid; #endif - ia64_acpiid_to_sapicid[lsapic->acpi_id] = (lsapic->id << 8) | lsapic->eid; + ia64_acpiid_to_sapicid[lsapic->acpi_id] = + (lsapic->id << 8) | lsapic->eid; ++available_cpus; } @@ -216,13 +216,12 @@ acpi_parse_lsapic (acpi_table_entry_header *header, const unsigned long end) return 0; } - static int __init -acpi_parse_lapic_nmi (acpi_table_entry_header *header, const unsigned long end) +acpi_parse_lapic_nmi(acpi_table_entry_header * header, const unsigned long end) { struct acpi_table_lapic_nmi *lacpi_nmi; - lacpi_nmi = (struct acpi_table_lapic_nmi*) header; + lacpi_nmi = (struct acpi_table_lapic_nmi *)header; if (BAD_MADT_ENTRY(lacpi_nmi, end)) return -EINVAL; @@ -231,13 +230,12 @@ acpi_parse_lapic_nmi (acpi_table_entry_header *header, const unsigned long end) return 0; } - static int __init -acpi_parse_iosapic (acpi_table_entry_header *header, const unsigned long end) +acpi_parse_iosapic(acpi_table_entry_header * header, const unsigned long end) { struct acpi_table_iosapic *iosapic; - iosapic = (struct acpi_table_iosapic *) header; + iosapic = (struct acpi_table_iosapic *)header; if (BAD_MADT_ENTRY(iosapic, end)) return -EINVAL; @@ -245,15 +243,14 @@ acpi_parse_iosapic (acpi_table_entry_header *header, const unsigned long end) return iosapic_init(iosapic->address, iosapic->global_irq_base); } - static int __init -acpi_parse_plat_int_src ( - acpi_table_entry_header *header, const unsigned long end) +acpi_parse_plat_int_src(acpi_table_entry_header * header, + const unsigned long end) { struct acpi_table_plat_int_src *plintsrc; int vector; - plintsrc = (struct acpi_table_plat_int_src *) header; + plintsrc = (struct acpi_table_plat_int_src *)header; if (BAD_MADT_ENTRY(plintsrc, end)) return -EINVAL; @@ -267,8 +264,12 @@ acpi_parse_plat_int_src ( plintsrc->iosapic_vector, plintsrc->eid, plintsrc->id, - (plintsrc->flags.polarity == 1) ? IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW, - (plintsrc->flags.trigger == 1) ? IOSAPIC_EDGE : IOSAPIC_LEVEL); + (plintsrc->flags.polarity == + 1) ? IOSAPIC_POL_HIGH : + IOSAPIC_POL_LOW, + (plintsrc->flags.trigger == + 1) ? IOSAPIC_EDGE : + IOSAPIC_LEVEL); platform_intr_list[plintsrc->type] = vector; if (acpi_madt_rev > 1) { @@ -283,7 +284,6 @@ acpi_parse_plat_int_src ( return 0; } - unsigned int can_cpei_retarget(void) { extern int cpe_vector; @@ -322,29 +322,30 @@ unsigned int get_cpei_target_cpu(void) } static int __init -acpi_parse_int_src_ovr ( - acpi_table_entry_header *header, const unsigned long end) +acpi_parse_int_src_ovr(acpi_table_entry_header * header, + const unsigned long end) { struct acpi_table_int_src_ovr *p; - p = (struct acpi_table_int_src_ovr *) header; + p = (struct acpi_table_int_src_ovr *)header; if (BAD_MADT_ENTRY(p, end)) return -EINVAL; iosapic_override_isa_irq(p->bus_irq, p->global_irq, - (p->flags.polarity == 1) ? IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW, - (p->flags.trigger == 1) ? IOSAPIC_EDGE : IOSAPIC_LEVEL); + (p->flags.polarity == + 1) ? IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW, + (p->flags.trigger == + 1) ? IOSAPIC_EDGE : IOSAPIC_LEVEL); return 0; } - static int __init -acpi_parse_nmi_src (acpi_table_entry_header *header, const unsigned long end) +acpi_parse_nmi_src(acpi_table_entry_header * header, const unsigned long end) { struct acpi_table_nmi_src *nmi_src; - nmi_src = (struct acpi_table_nmi_src*) header; + nmi_src = (struct acpi_table_nmi_src *)header; if (BAD_MADT_ENTRY(nmi_src, end)) return -EINVAL; @@ -353,11 +354,9 @@ acpi_parse_nmi_src (acpi_table_entry_header *header, const unsigned long end) return 0; } -static void __init -acpi_madt_oem_check (char *oem_id, char *oem_table_id) +static void __init acpi_madt_oem_check(char *oem_id, char *oem_table_id) { - if (!strncmp(oem_id, "IBM", 3) && - (!strncmp(oem_table_id, "SERMOW", 6))) { + if (!strncmp(oem_id, "IBM", 3) && (!strncmp(oem_table_id, "SERMOW", 6))) { /* * Unfortunately ITC_DRIFT is not yet part of the @@ -370,19 +369,18 @@ acpi_madt_oem_check (char *oem_id, char *oem_table_id) } } -static int __init -acpi_parse_madt (unsigned long phys_addr, unsigned long size) +static int __init acpi_parse_madt(unsigned long phys_addr, unsigned long size) { if (!phys_addr || !size) return -EINVAL; - acpi_madt = (struct acpi_table_madt *) __va(phys_addr); + acpi_madt = (struct acpi_table_madt *)__va(phys_addr); acpi_madt_rev = acpi_madt->header.revision; /* remember the value for reference after free_initmem() */ #ifdef CONFIG_ITANIUM - has_8259 = 1; /* Firmware on old Itanium systems is broken */ + has_8259 = 1; /* Firmware on old Itanium systems is broken */ #else has_8259 = acpi_madt->flags.pcat_compat; #endif @@ -396,19 +394,18 @@ acpi_parse_madt (unsigned long phys_addr, unsigned long size) printk(KERN_INFO PREFIX "Local APIC address %p\n", ipi_base_addr); acpi_madt_oem_check(acpi_madt->header.oem_id, - acpi_madt->header.oem_table_id); + acpi_madt->header.oem_table_id); return 0; } - #ifdef CONFIG_ACPI_NUMA #undef SLIT_DEBUG #define PXM_FLAG_LEN ((MAX_PXM_DOMAINS + 1)/32) -static int __initdata srat_num_cpus; /* number of cpus */ +static int __initdata srat_num_cpus; /* number of cpus */ static u32 __devinitdata pxm_flag[PXM_FLAG_LEN]; #define pxm_bit_set(bit) (set_bit(bit,(void *)pxm_flag)) #define pxm_bit_test(bit) (test_bit(bit,(void *)pxm_flag)) @@ -421,15 +418,15 @@ static struct acpi_table_slit __initdata *slit_table; * ACPI 2.0 SLIT (System Locality Information Table) * http://devresource.hp.com/devresource/Docs/TechPapers/IA64/slit.pdf */ -void __init -acpi_numa_slit_init (struct acpi_table_slit *slit) +void __init acpi_numa_slit_init(struct acpi_table_slit *slit) { u32 len; len = sizeof(struct acpi_table_header) + 8 - + slit->localities * slit->localities; + + slit->localities * slit->localities; if (slit->header.length != len) { - printk(KERN_ERR "ACPI 2.0 SLIT: size mismatch: %d expected, %d actual\n", + printk(KERN_ERR + "ACPI 2.0 SLIT: size mismatch: %d expected, %d actual\n", len, slit->header.length); memset(numa_slit, 10, sizeof(numa_slit)); return; @@ -438,19 +435,20 @@ acpi_numa_slit_init (struct acpi_table_slit *slit) } void __init -acpi_numa_processor_affinity_init (struct acpi_table_processor_affinity *pa) +acpi_numa_processor_affinity_init(struct acpi_table_processor_affinity *pa) { /* record this node in proximity bitmap */ pxm_bit_set(pa->proximity_domain); - node_cpuid[srat_num_cpus].phys_id = (pa->apic_id << 8) | (pa->lsapic_eid); + node_cpuid[srat_num_cpus].phys_id = + (pa->apic_id << 8) | (pa->lsapic_eid); /* nid should be overridden as logical node id later */ node_cpuid[srat_num_cpus].nid = pa->proximity_domain; srat_num_cpus++; } void __init -acpi_numa_memory_affinity_init (struct acpi_table_memory_affinity *ma) +acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma) { unsigned long paddr, size; u8 pxm; @@ -487,8 +485,7 @@ acpi_numa_memory_affinity_init (struct acpi_table_memory_affinity *ma) num_node_memblks++; } -void __init -acpi_numa_arch_fixup (void) +void __init acpi_numa_arch_fixup(void) { int i, j, node_from, node_to; @@ -534,21 +531,24 @@ acpi_numa_arch_fixup (void) for (i = 0; i < srat_num_cpus; i++) node_cpuid[i].nid = pxm_to_nid_map[node_cpuid[i].nid]; - printk(KERN_INFO "Number of logical nodes in system = %d\n", num_online_nodes()); - printk(KERN_INFO "Number of memory chunks in system = %d\n", num_node_memblks); + printk(KERN_INFO "Number of logical nodes in system = %d\n", + num_online_nodes()); + printk(KERN_INFO "Number of memory chunks in system = %d\n", + num_node_memblks); - if (!slit_table) return; + if (!slit_table) + return; memset(numa_slit, -1, sizeof(numa_slit)); - for (i=0; ilocalities; i++) { + for (i = 0; i < slit_table->localities; i++) { if (!pxm_bit_test(i)) continue; node_from = pxm_to_nid_map[i]; - for (j=0; jlocalities; j++) { + for (j = 0; j < slit_table->localities; j++) { if (!pxm_bit_test(j)) continue; node_to = pxm_to_nid_map[j]; node_distance(node_from, node_to) = - slit_table->entry[i*slit_table->localities + j]; + slit_table->entry[i * slit_table->localities + j]; } } @@ -556,40 +556,43 @@ acpi_numa_arch_fixup (void) printk("ACPI 2.0 SLIT locality table:\n"); for_each_online_node(i) { for_each_online_node(j) - printk("%03d ", node_distance(i,j)); + printk("%03d ", node_distance(i, j)); printk("\n"); } #endif } -#endif /* CONFIG_ACPI_NUMA */ +#endif /* CONFIG_ACPI_NUMA */ /* * success: return IRQ number (>=0) * failure: return < 0 */ -int -acpi_register_gsi (u32 gsi, int edge_level, int active_high_low) +int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low) { if (has_8259 && gsi < 16) return isa_irq_to_vector(gsi); return iosapic_register_intr(gsi, - (active_high_low == ACPI_ACTIVE_HIGH) ? IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW, - (edge_level == ACPI_EDGE_SENSITIVE) ? IOSAPIC_EDGE : IOSAPIC_LEVEL); + (active_high_low == + ACPI_ACTIVE_HIGH) ? IOSAPIC_POL_HIGH : + IOSAPIC_POL_LOW, + (edge_level == + ACPI_EDGE_SENSITIVE) ? IOSAPIC_EDGE : + IOSAPIC_LEVEL); } + EXPORT_SYMBOL(acpi_register_gsi); #ifdef CONFIG_ACPI_DEALLOCATE_IRQ -void -acpi_unregister_gsi (u32 gsi) +void acpi_unregister_gsi(u32 gsi) { iosapic_unregister_intr(gsi); } + EXPORT_SYMBOL(acpi_unregister_gsi); -#endif /* CONFIG_ACPI_DEALLOCATE_IRQ */ +#endif /* CONFIG_ACPI_DEALLOCATE_IRQ */ -static int __init -acpi_parse_fadt (unsigned long phys_addr, unsigned long size) +static int __init acpi_parse_fadt(unsigned long phys_addr, unsigned long size) { struct acpi_table_header *fadt_header; struct fadt_descriptor_rev2 *fadt; @@ -597,11 +600,11 @@ acpi_parse_fadt (unsigned long phys_addr, unsigned long size) if (!phys_addr || !size) return -EINVAL; - fadt_header = (struct acpi_table_header *) __va(phys_addr); + fadt_header = (struct acpi_table_header *)__va(phys_addr); if (fadt_header->revision != 3) - return -ENODEV; /* Only deal with ACPI 2.0 FADT */ + return -ENODEV; /* Only deal with ACPI 2.0 FADT */ - fadt = (struct fadt_descriptor_rev2 *) fadt_header; + fadt = (struct fadt_descriptor_rev2 *)fadt_header; if (!(fadt->iapc_boot_arch & BAF_8042_KEYBOARD_CONTROLLER)) acpi_kbd_controller_present = 0; @@ -613,22 +616,19 @@ acpi_parse_fadt (unsigned long phys_addr, unsigned long size) return 0; } - -unsigned long __init -acpi_find_rsdp (void) +unsigned long __init acpi_find_rsdp(void) { unsigned long rsdp_phys = 0; if (efi.acpi20) rsdp_phys = __pa(efi.acpi20); else if (efi.acpi) - printk(KERN_WARNING PREFIX "v1.0/r0.71 tables no longer supported\n"); + printk(KERN_WARNING PREFIX + "v1.0/r0.71 tables no longer supported\n"); return rsdp_phys; } - -int __init -acpi_boot_init (void) +int __init acpi_boot_init(void) { /* @@ -646,31 +646,43 @@ acpi_boot_init (void) /* Local APIC */ - if (acpi_table_parse_madt(ACPI_MADT_LAPIC_ADDR_OVR, acpi_parse_lapic_addr_ovr, 0) < 0) - printk(KERN_ERR PREFIX "Error parsing LAPIC address override entry\n"); + if (acpi_table_parse_madt + (ACPI_MADT_LAPIC_ADDR_OVR, acpi_parse_lapic_addr_ovr, 0) < 0) + printk(KERN_ERR PREFIX + "Error parsing LAPIC address override entry\n"); - if (acpi_table_parse_madt(ACPI_MADT_LSAPIC, acpi_parse_lsapic, NR_CPUS) < 1) - printk(KERN_ERR PREFIX "Error parsing MADT - no LAPIC entries\n"); + if (acpi_table_parse_madt(ACPI_MADT_LSAPIC, acpi_parse_lsapic, NR_CPUS) + < 1) + printk(KERN_ERR PREFIX + "Error parsing MADT - no LAPIC entries\n"); - if (acpi_table_parse_madt(ACPI_MADT_LAPIC_NMI, acpi_parse_lapic_nmi, 0) < 0) + if (acpi_table_parse_madt(ACPI_MADT_LAPIC_NMI, acpi_parse_lapic_nmi, 0) + < 0) printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n"); /* I/O APIC */ - if (acpi_table_parse_madt(ACPI_MADT_IOSAPIC, acpi_parse_iosapic, NR_IOSAPICS) < 1) - printk(KERN_ERR PREFIX "Error parsing MADT - no IOSAPIC entries\n"); + if (acpi_table_parse_madt + (ACPI_MADT_IOSAPIC, acpi_parse_iosapic, NR_IOSAPICS) < 1) + printk(KERN_ERR PREFIX + "Error parsing MADT - no IOSAPIC entries\n"); /* System-Level Interrupt Routing */ - if (acpi_table_parse_madt(ACPI_MADT_PLAT_INT_SRC, acpi_parse_plat_int_src, ACPI_MAX_PLATFORM_INTERRUPTS) < 0) - printk(KERN_ERR PREFIX "Error parsing platform interrupt source entry\n"); + if (acpi_table_parse_madt + (ACPI_MADT_PLAT_INT_SRC, acpi_parse_plat_int_src, + ACPI_MAX_PLATFORM_INTERRUPTS) < 0) + printk(KERN_ERR PREFIX + "Error parsing platform interrupt source entry\n"); - if (acpi_table_parse_madt(ACPI_MADT_INT_SRC_OVR, acpi_parse_int_src_ovr, 0) < 0) - printk(KERN_ERR PREFIX "Error parsing interrupt source overrides entry\n"); + if (acpi_table_parse_madt + (ACPI_MADT_INT_SRC_OVR, acpi_parse_int_src_ovr, 0) < 0) + printk(KERN_ERR PREFIX + "Error parsing interrupt source overrides entry\n"); if (acpi_table_parse_madt(ACPI_MADT_NMI_SRC, acpi_parse_nmi_src, 0) < 0) printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n"); - skip_madt: + skip_madt: /* * FADT says whether a legacy keyboard controller is present. @@ -685,8 +697,9 @@ acpi_boot_init (void) if (available_cpus == 0) { printk(KERN_INFO "ACPI: Found 0 CPUS; assuming 1\n"); printk(KERN_INFO "CPU 0 (0x%04x)", hard_smp_processor_id()); - smp_boot_data.cpu_phys_id[available_cpus] = hard_smp_processor_id(); - available_cpus = 1; /* We've got at least one of these, no? */ + smp_boot_data.cpu_phys_id[available_cpus] = + hard_smp_processor_id(); + available_cpus = 1; /* We've got at least one of these, no? */ } smp_boot_data.cpu_count = available_cpus; @@ -695,8 +708,10 @@ acpi_boot_init (void) if (srat_num_cpus == 0) { int cpu, i = 1; for (cpu = 0; cpu < smp_boot_data.cpu_count; cpu++) - if (smp_boot_data.cpu_phys_id[cpu] != hard_smp_processor_id()) - node_cpuid[i++].phys_id = smp_boot_data.cpu_phys_id[cpu]; + if (smp_boot_data.cpu_phys_id[cpu] != + hard_smp_processor_id()) + node_cpuid[i++].phys_id = + smp_boot_data.cpu_phys_id[cpu]; } # endif #endif @@ -704,12 +719,12 @@ acpi_boot_init (void) build_cpu_to_node_map(); #endif /* Make boot-up look pretty */ - printk(KERN_INFO "%d CPUs available, %d CPUs total\n", available_cpus, total_cpus); + printk(KERN_INFO "%d CPUs available, %d CPUs total\n", available_cpus, + total_cpus); return 0; } -int -acpi_gsi_to_irq (u32 gsi, unsigned int *irq) +int acpi_gsi_to_irq(u32 gsi, unsigned int *irq) { int vector; @@ -730,11 +745,10 @@ acpi_gsi_to_irq (u32 gsi, unsigned int *irq) */ #ifdef CONFIG_ACPI_HOTPLUG_CPU static -int -acpi_map_cpu2node(acpi_handle handle, int cpu, long physid) +int acpi_map_cpu2node(acpi_handle handle, int cpu, long physid) { #ifdef CONFIG_ACPI_NUMA - int pxm_id; + int pxm_id; pxm_id = acpi_get_pxm(handle); @@ -742,31 +756,28 @@ acpi_map_cpu2node(acpi_handle handle, int cpu, long physid) * Assuming that the container driver would have set the proximity * domain and would have initialized pxm_to_nid_map[pxm_id] && pxm_flag */ - node_cpuid[cpu].nid = (pxm_id < 0) ? 0: - pxm_to_nid_map[pxm_id]; + node_cpuid[cpu].nid = (pxm_id < 0) ? 0 : pxm_to_nid_map[pxm_id]; - node_cpuid[cpu].phys_id = physid; + node_cpuid[cpu].phys_id = physid; #endif - return(0); + return (0); } - -int -acpi_map_lsapic(acpi_handle handle, int *pcpu) +int acpi_map_lsapic(acpi_handle handle, int *pcpu) { - struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL}; + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; union acpi_object *obj; struct acpi_table_lsapic *lsapic; cpumask_t tmp_map; long physid; int cpu; - + if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer))) return -EINVAL; - if (!buffer.length || !buffer.pointer) + if (!buffer.length || !buffer.pointer) return -EINVAL; - + obj = buffer.pointer; if (obj->type != ACPI_TYPE_BUFFER || obj->buffer.length < sizeof(*lsapic)) { @@ -782,7 +793,7 @@ acpi_map_lsapic(acpi_handle handle, int *pcpu) return -EINVAL; } - physid = ((lsapic->id <<8) | (lsapic->eid)); + physid = ((lsapic->id << 8) | (lsapic->eid)); acpi_os_free(buffer.pointer); buffer.length = ACPI_ALLOCATE_BUFFER; @@ -790,50 +801,49 @@ acpi_map_lsapic(acpi_handle handle, int *pcpu) cpus_complement(tmp_map, cpu_present_map); cpu = first_cpu(tmp_map); - if(cpu >= NR_CPUS) + if (cpu >= NR_CPUS) return -EINVAL; acpi_map_cpu2node(handle, cpu, physid); - cpu_set(cpu, cpu_present_map); + cpu_set(cpu, cpu_present_map); ia64_cpu_to_sapicid[cpu] = physid; ia64_acpiid_to_sapicid[lsapic->acpi_id] = ia64_cpu_to_sapicid[cpu]; *pcpu = cpu; - return(0); + return (0); } -EXPORT_SYMBOL(acpi_map_lsapic); +EXPORT_SYMBOL(acpi_map_lsapic); -int -acpi_unmap_lsapic(int cpu) +int acpi_unmap_lsapic(int cpu) { int i; - for (i=0; i #include - /* -------------------------------------------------------------------------- Low-Level Sleep Support -------------------------------------------------------------------------- */ @@ -77,11 +76,12 @@ static void init_low_mapping(void) * Create an identity mapped page table and copy the wakeup routine to * low memory. */ -int acpi_save_state_mem (void) +int acpi_save_state_mem(void) { init_low_mapping(); - memcpy((void *) acpi_wakeup_address, &wakeup_start, &wakeup_end - &wakeup_start); + memcpy((void *)acpi_wakeup_address, &wakeup_start, + &wakeup_end - &wakeup_start); acpi_copy_wakeup_routine(acpi_wakeup_address); return 0; @@ -90,7 +90,7 @@ int acpi_save_state_mem (void) /* * acpi_restore_state */ -void acpi_restore_state_mem (void) +void acpi_restore_state_mem(void) { set_pgd(pgd_offset(current->mm, 0UL), low_ptr); flush_tlb_all(); @@ -108,7 +108,8 @@ void __init acpi_reserve_bootmem(void) { acpi_wakeup_address = (unsigned long)alloc_bootmem_low(PAGE_SIZE); if ((&wakeup_end - &wakeup_start) > PAGE_SIZE) - printk(KERN_CRIT "ACPI: Wakeup code way too big, will crash on attempt to suspend\n"); + printk(KERN_CRIT + "ACPI: Wakeup code way too big, will crash on attempt to suspend\n"); } static int __init acpi_sleep_setup(char *str) @@ -127,6 +128,8 @@ static int __init acpi_sleep_setup(char *str) __setup("acpi_sleep=", acpi_sleep_setup); -#endif /*CONFIG_ACPI_SLEEP*/ +#endif /*CONFIG_ACPI_SLEEP */ -void acpi_pci_link_exit(void) {} +void acpi_pci_link_exit(void) +{ +} -- cgit v1.2.2 From 1f3a730117ceda2a7c917d687921fe3c82283968 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 5 Aug 2005 03:33:14 -0400 Subject: [ACPI] Lindent created a syntax error that broke the build Signed-off-by: Len Brown --- arch/i386/kernel/acpi/boot.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c index 98d119c66379..09700d894668 100644 --- a/arch/i386/kernel/acpi/boot.c +++ b/arch/i386/kernel/acpi/boot.c @@ -94,7 +94,7 @@ static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE; #define MAX_MADT_ENTRIES 256 u8 x86_acpiid_to_apicid[MAX_MADT_ENTRIES] = - {[0...MAX_MADT_ENTRIES - 1] = 0xff }; + {[0 ... MAX_MADT_ENTRIES - 1] = 0xff }; EXPORT_SYMBOL(x86_acpiid_to_apicid); /* -------------------------------------------------------------------------- -- cgit v1.2.2 From 702c7e7626deeabb057b6f529167b65ec2eefbdb Mon Sep 17 00:00:00 2001 From: MAEDA Naoaki Date: Mon, 8 Aug 2005 01:09:00 -0400 Subject: [ACPI] fix ia64 build issues resulting from Lindent and merge Signed-off-by: MAEDA Naoaki Signed-off-by: Andrew Morton Signed-off-by: Brown, Len --- arch/ia64/kernel/acpi.c | 4 ++-- arch/ia64/kernel/iosapic.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index f3046bdd4b14..78bc21987121 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -74,7 +74,7 @@ unsigned int acpi_cpei_override; unsigned int acpi_cpei_phys_cpuid; #define MAX_SAPICS 256 -u16 ia64_acpiid_to_sapicid[MAX_SAPICS] = {[0...MAX_SAPICS - 1] = -1 }; +u16 ia64_acpiid_to_sapicid[MAX_SAPICS] = {[0 ... MAX_SAPICS - 1] = -1 }; EXPORT_SYMBOL(ia64_acpiid_to_sapicid); @@ -138,7 +138,7 @@ const char *acpi_get_sysname(void) /* Array to record platform interrupt vectors for generic interrupt routing. */ int platform_intr_list[ACPI_MAX_PLATFORM_INTERRUPTS] = { - [0...ACPI_MAX_PLATFORM_INTERRUPTS - 1] = -1 + [0 ... ACPI_MAX_PLATFORM_INTERRUPTS - 1] = -1 }; enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_IOSAPIC; diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c index 8f53915f4ae6..a13df592ebf7 100644 --- a/arch/ia64/kernel/iosapic.c +++ b/arch/ia64/kernel/iosapic.c @@ -735,11 +735,11 @@ again: spin_unlock_irqrestore(&iosapic_lock, flags); /* If vector is running out, we try to find a sharable vector */ - vector = assign_irq_vector_nopanic(AUTO_ASSIGN); + vector = assign_irq_vector(AUTO_ASSIGN); if (vector < 0) { vector = iosapic_find_sharable_vector(trigger, polarity); if (vector < 0) - Return -ENOSPC; + return -ENOSPC; } spin_lock_irqsave(&irq_descp(vector)->lock, flags); -- cgit v1.2.2 From 888ba6c62bc61a995d283977eb3a6cbafd6f4ac6 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Wed, 24 Aug 2005 12:07:20 -0400 Subject: [ACPI] delete CONFIG_ACPI_BOOT it has been a synonym for CONFIG_ACPI since 2.6.12 Signed-off-by: Len Brown --- arch/i386/Kconfig | 1 - arch/i386/defconfig | 1 - arch/i386/kernel/Makefile | 2 +- arch/i386/kernel/acpi/Makefile | 2 +- arch/i386/kernel/io_apic.c | 4 ++-- arch/i386/kernel/mpparse.c | 10 ++++------ arch/i386/kernel/setup.c | 8 ++++---- arch/i386/mach-es7000/es7000plat.c | 4 ++-- arch/ia64/configs/bigsur_defconfig | 1 - arch/ia64/configs/sn2_defconfig | 1 - arch/ia64/configs/tiger_defconfig | 1 - arch/ia64/configs/zx1_defconfig | 1 - arch/ia64/defconfig | 1 - arch/ia64/kernel/acpi.c | 4 ++-- arch/ia64/kernel/setup.c | 4 ++-- arch/ia64/kernel/topology.c | 2 +- arch/x86_64/Kconfig | 2 -- arch/x86_64/defconfig | 1 - arch/x86_64/kernel/Makefile | 2 +- arch/x86_64/kernel/acpi/Makefile | 4 ++-- arch/x86_64/kernel/io_apic.c | 4 ++-- arch/x86_64/kernel/mpparse.c | 10 ++++------ arch/x86_64/kernel/setup.c | 8 ++++---- 23 files changed, 32 insertions(+), 46 deletions(-) (limited to 'arch') diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index 619d843ba231..9ba334908742 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -1203,7 +1203,6 @@ config PCI_DIRECT config PCI_MMCONFIG bool depends on PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY) - select ACPI_BOOT default y source "drivers/pci/pcie/Kconfig" diff --git a/arch/i386/defconfig b/arch/i386/defconfig index ca07b95c06b8..1c0076e22dda 100644 --- a/arch/i386/defconfig +++ b/arch/i386/defconfig @@ -131,7 +131,6 @@ CONFIG_SOFTWARE_SUSPEND=y # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y -CONFIG_ACPI_BOOT=y CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_SLEEP_PROC_FS=y diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile index 4cc83b322b36..c52b4fad011b 100644 --- a/arch/i386/kernel/Makefile +++ b/arch/i386/kernel/Makefile @@ -11,7 +11,7 @@ obj-y := process.o semaphore.o signal.o entry.o traps.o irq.o vm86.o \ obj-y += cpu/ obj-y += timers/ -obj-$(CONFIG_ACPI_BOOT) += acpi/ +obj-$(CONFIG_ACPI) += acpi/ obj-$(CONFIG_X86_BIOS_REBOOT) += reboot.o obj-$(CONFIG_MCA) += mca.o obj-$(CONFIG_X86_MSR) += msr.o diff --git a/arch/i386/kernel/acpi/Makefile b/arch/i386/kernel/acpi/Makefile index 5e291a20c03d..267ca48e1b6c 100644 --- a/arch/i386/kernel/acpi/Makefile +++ b/arch/i386/kernel/acpi/Makefile @@ -1,4 +1,4 @@ -obj-$(CONFIG_ACPI_BOOT) := boot.o +obj-y := boot.o obj-$(CONFIG_X86_IO_APIC) += earlyquirk.o obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup.o diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c index 6578f40bd501..ebedd2e21670 100644 --- a/arch/i386/kernel/io_apic.c +++ b/arch/i386/kernel/io_apic.c @@ -2421,7 +2421,7 @@ device_initcall(ioapic_init_sysfs); ACPI-based IOAPIC Configuration -------------------------------------------------------------------------- */ -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI int __init io_apic_get_unique_id (int ioapic, int apic_id) { @@ -2574,4 +2574,4 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a return 0; } -#endif /*CONFIG_ACPI_BOOT*/ +#endif /* CONFIG_ACPI */ diff --git a/arch/i386/kernel/mpparse.c b/arch/i386/kernel/mpparse.c index ce838abb27d8..9a4db7d30001 100644 --- a/arch/i386/kernel/mpparse.c +++ b/arch/i386/kernel/mpparse.c @@ -653,8 +653,6 @@ void __init get_smp_config (void) struct intel_mp_floating *mpf = mpf_found; /* - * ACPI may be used to obtain the entire SMP configuration or just to - * enumerate/configure processors (CONFIG_ACPI_BOOT). Note that * ACPI supports both logical (e.g. Hyper-Threading) and physical * processors, where MPS only supports physical. */ @@ -810,7 +808,7 @@ void __init find_smp_config (void) ACPI-based MP Configuration -------------------------------------------------------------------------- */ -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI void __init mp_register_lapic_address ( u64 address) @@ -856,7 +854,7 @@ void __init mp_register_lapic ( MP_processor_info(&processor); } -#if defined(CONFIG_X86_IO_APIC) && (defined(CONFIG_ACPI_INTERPRETER) || defined(CONFIG_ACPI_BOOT)) +#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_ACPI_INTERPRETER) #define MP_ISA_BUS 0 #define MP_MAX_IOAPIC_PIN 127 @@ -1138,5 +1136,5 @@ int mp_register_gsi (u32 gsi, int edge_level, int active_high_low) return gsi; } -#endif /*CONFIG_X86_IO_APIC && (CONFIG_ACPI_INTERPRETER || CONFIG_ACPI_BOOT)*/ -#endif /*CONFIG_ACPI_BOOT*/ +#endif /* CONFIG_X86_IO_APIC && CONFIG_ACPI_INTERPRETER */ +#endif /* CONFIG_ACPI */ diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c index af4de58cab54..d3943e5edc8f 100644 --- a/arch/i386/kernel/setup.c +++ b/arch/i386/kernel/setup.c @@ -94,7 +94,7 @@ unsigned long mmu_cr4_features; #endif EXPORT_SYMBOL(acpi_disabled); -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI int __initdata acpi_force = 0; extern acpi_interrupt_flags acpi_sci_flags; #endif @@ -794,7 +794,7 @@ static void __init parse_cmdline_early (char ** cmdline_p) } #endif -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI /* "acpi=off" disables both ACPI table parsing and interpreter */ else if (!memcmp(from, "acpi=off", 8)) { disable_acpi(); @@ -850,7 +850,7 @@ static void __init parse_cmdline_early (char ** cmdline_p) else if (!memcmp(from, "noapic", 6)) disable_ioapic_setup(); #endif /* CONFIG_X86_LOCAL_APIC */ -#endif /* CONFIG_ACPI_BOOT */ +#endif /* CONFIG_ACPI */ #ifdef CONFIG_X86_LOCAL_APIC /* enable local APIC */ @@ -1575,7 +1575,7 @@ void __init setup_arch(char **cmdline_p) if (efi_enabled) efi_map_memmap(); -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI /* * Parse the ACPI tables for possible boot-time SMP configuration. */ diff --git a/arch/i386/mach-es7000/es7000plat.c b/arch/i386/mach-es7000/es7000plat.c index d5936d500479..baac9da042ce 100644 --- a/arch/i386/mach-es7000/es7000plat.c +++ b/arch/i386/mach-es7000/es7000plat.c @@ -51,7 +51,7 @@ struct mip_reg *host_reg; int mip_port; unsigned long mip_addr, host_addr; -#if defined(CONFIG_X86_IO_APIC) && (defined(CONFIG_ACPI_INTERPRETER) || defined(CONFIG_ACPI_BOOT)) +#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_ACPI_INTERPRETER) /* * GSI override for ES7000 platforms. @@ -73,7 +73,7 @@ es7000_rename_gsi(int ioapic, int gsi) return gsi; } -#endif // (CONFIG_X86_IO_APIC) && (CONFIG_ACPI_INTERPRETER || CONFIG_ACPI_BOOT) +#endif // (CONFIG_X86_IO_APIC) && (CONFIG_ACPI_INTERPRETER) /* * Parse the OEM Table diff --git a/arch/ia64/configs/bigsur_defconfig b/arch/ia64/configs/bigsur_defconfig index b95fcf86ea00..456c65689bef 100644 --- a/arch/ia64/configs/bigsur_defconfig +++ b/arch/ia64/configs/bigsur_defconfig @@ -107,7 +107,6 @@ CONFIG_ACPI=y # # ACPI (Advanced Configuration and Power Interface) Support # -CONFIG_ACPI_BOOT=y CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_BUTTON=m CONFIG_ACPI_VIDEO=m diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig index dccf35c60b94..dc483c18343f 100644 --- a/arch/ia64/configs/sn2_defconfig +++ b/arch/ia64/configs/sn2_defconfig @@ -130,7 +130,6 @@ CONFIG_ACPI=y # # ACPI (Advanced Configuration and Power Interface) Support # -CONFIG_ACPI_BOOT=y CONFIG_ACPI_INTERPRETER=y # CONFIG_ACPI_BUTTON is not set CONFIG_ACPI_VIDEO=m diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig index c853cfcd2d11..cd2d6375a853 100644 --- a/arch/ia64/configs/tiger_defconfig +++ b/arch/ia64/configs/tiger_defconfig @@ -128,7 +128,6 @@ CONFIG_ACPI=y # # ACPI (Advanced Configuration and Power Interface) Support # -CONFIG_ACPI_BOOT=y CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_BUTTON=m # CONFIG_ACPI_VIDEO is not set diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig index 88e8867fa8e8..cf58404769a8 100644 --- a/arch/ia64/configs/zx1_defconfig +++ b/arch/ia64/configs/zx1_defconfig @@ -128,7 +128,6 @@ CONFIG_ACPI=y # # ACPI (Advanced Configuration and Power Interface) Support # -CONFIG_ACPI_BOOT=y CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_VIDEO=m diff --git a/arch/ia64/defconfig b/arch/ia64/defconfig index 8444add76380..f38c677f7afd 100644 --- a/arch/ia64/defconfig +++ b/arch/ia64/defconfig @@ -118,7 +118,6 @@ CONFIG_ACPI=y # # ACPI (Advanced Configuration and Power Interface) Support # -CONFIG_ACPI_BOOT=y CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_BUTTON=m CONFIG_ACPI_VIDEO=m diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 78bc21987121..318787c84ac0 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -132,7 +132,7 @@ const char *acpi_get_sysname(void) #endif } -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI #define ACPI_MAX_PLATFORM_INTERRUPTS 256 @@ -917,4 +917,4 @@ int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base) EXPORT_SYMBOL(acpi_unregister_ioapic); -#endif /* CONFIG_ACPI_BOOT */ +#endif /* CONFIG_ACPI */ diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index 84f89da7c640..1f5c26dbe705 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -384,7 +384,7 @@ setup_arch (char **cmdline_p) if (early_console_setup(*cmdline_p) == 0) mark_bsp_online(); -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI /* Initialize the ACPI boot-time table parser */ acpi_table_init(); # ifdef CONFIG_ACPI_NUMA @@ -420,7 +420,7 @@ setup_arch (char **cmdline_p) cpu_init(); /* initialize the bootstrap CPU */ -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI acpi_boot_init(); #endif diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c index 92ff46ad21e2..706b7734e191 100644 --- a/arch/ia64/kernel/topology.c +++ b/arch/ia64/kernel/topology.c @@ -36,7 +36,7 @@ int arch_register_cpu(int num) parent = &sysfs_nodes[cpu_to_node(num)]; #endif /* CONFIG_NUMA */ -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI /* * If CPEI cannot be re-targetted, and this is * CPEI target, then dont create the control file diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index 660a03a89e66..40242c61e90a 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -144,7 +144,6 @@ config X86_CPUID with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to /dev/cpu/31/cpuid. -# disable it for opteron optimized builds because it pulls in ACPI_BOOT config X86_HT bool depends on SMP && !MK8 @@ -461,7 +460,6 @@ config PCI_DIRECT config PCI_MMCONFIG bool "Support mmconfig PCI config space access" depends on PCI && ACPI - select ACPI_BOOT config UNORDERED_IO bool "Unordered IO mapping access" diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig index 776f3c866b70..aed77c1c5ccc 100644 --- a/arch/x86_64/defconfig +++ b/arch/x86_64/defconfig @@ -135,7 +135,6 @@ CONFIG_PM_STD_PARTITION="" # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y -CONFIG_ACPI_BOOT=y CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile index 48f9e2c19cd6..0296ca6cbfa3 100644 --- a/arch/x86_64/kernel/Makefile +++ b/arch/x86_64/kernel/Makefile @@ -12,7 +12,7 @@ obj-y := process.o semaphore.o signal.o entry.o traps.o irq.o \ obj-$(CONFIG_X86_MCE) += mce.o obj-$(CONFIG_X86_MCE_INTEL) += mce_intel.o obj-$(CONFIG_MTRR) += ../../i386/kernel/cpu/mtrr/ -obj-$(CONFIG_ACPI_BOOT) += acpi/ +obj-$(CONFIG_ACPI) += acpi/ obj-$(CONFIG_X86_MSR) += msr.o obj-$(CONFIG_MICROCODE) += microcode.o obj-$(CONFIG_X86_CPUID) += cpuid.o diff --git a/arch/x86_64/kernel/acpi/Makefile b/arch/x86_64/kernel/acpi/Makefile index d2c2ee5f9a88..7da9ace890bd 100644 --- a/arch/x86_64/kernel/acpi/Makefile +++ b/arch/x86_64/kernel/acpi/Makefile @@ -1,3 +1,3 @@ -obj-$(CONFIG_ACPI_BOOT) := boot.o -boot-$(CONFIG_ACPI_BOOT) := ../../../i386/kernel/acpi/boot.o +obj-y := boot.o +boot-y := ../../../i386/kernel/acpi/boot.o obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup.o diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c index d206d7e49cf5..1013a8fe44d7 100644 --- a/arch/x86_64/kernel/io_apic.c +++ b/arch/x86_64/kernel/io_apic.c @@ -1841,7 +1841,7 @@ device_initcall(ioapic_init_sysfs); ACPI-based IOAPIC Configuration -------------------------------------------------------------------------- */ -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI #define IO_APIC_MAX_ID 0xFE @@ -1923,7 +1923,7 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a return 0; } -#endif /*CONFIG_ACPI_BOOT*/ +#endif /* CONFIG_ACPI */ /* diff --git a/arch/x86_64/kernel/mpparse.c b/arch/x86_64/kernel/mpparse.c index 79c362d03e2e..86445f320d86 100644 --- a/arch/x86_64/kernel/mpparse.c +++ b/arch/x86_64/kernel/mpparse.c @@ -74,7 +74,7 @@ static unsigned int num_processors = 0; physid_mask_t phys_cpu_present_map = PHYSID_MASK_NONE; /* ACPI MADT entry parsing functions */ -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI extern struct acpi_boot_flags acpi_boot; #ifdef CONFIG_X86_LOCAL_APIC extern int acpi_parse_lapic (acpi_table_entry_header *header); @@ -84,7 +84,7 @@ extern int acpi_parse_lapic_nmi (acpi_table_entry_header *header); #ifdef CONFIG_X86_IO_APIC extern int acpi_parse_ioapic (acpi_table_entry_header *header); #endif /*CONFIG_X86_IO_APIC*/ -#endif /*CONFIG_ACPI_BOOT*/ +#endif /*CONFIG_ACPI*/ u8 bios_cpu_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID }; @@ -519,8 +519,6 @@ void __init get_smp_config (void) struct intel_mp_floating *mpf = mpf_found; /* - * ACPI may be used to obtain the entire SMP configuration or just to - * enumerate/configure processors (CONFIG_ACPI_BOOT). Note that * ACPI supports both logical (e.g. Hyper-Threading) and physical * processors, where MPS only supports physical. */ @@ -673,7 +671,7 @@ void __init find_smp_config (void) ACPI-based MP Configuration -------------------------------------------------------------------------- */ -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI void __init mp_register_lapic_address ( u64 address) @@ -994,4 +992,4 @@ int mp_register_gsi(u32 gsi, int edge_level, int active_high_low) } #endif /*CONFIG_X86_IO_APIC*/ -#endif /*CONFIG_ACPI_BOOT*/ +#endif /*CONFIG_ACPI*/ diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index 116a491e2961..cfcebc8ab7b4 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -71,7 +71,7 @@ unsigned long mmu_cr4_features; int acpi_disabled; EXPORT_SYMBOL(acpi_disabled); -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI extern int __initdata acpi_ht; extern acpi_interrupt_flags acpi_sci_flags; int __initdata acpi_force = 0; @@ -294,7 +294,7 @@ static __init void parse_cmdline_early (char ** cmdline_p) maxcpus = simple_strtoul(from + 8, NULL, 0); } #endif -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI /* "acpi=off" disables both ACPI table parsing and interpreter init */ if (!memcmp(from, "acpi=off", 8)) disable_acpi(); @@ -566,7 +566,7 @@ void __init setup_arch(char **cmdline_p) init_memory_mapping(0, (end_pfn_map << PAGE_SHIFT)); -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI /* * Initialize the ACPI boot-time table parser (gets the RSDP and SDT). * Call this early for SRAT node setup. @@ -658,7 +658,7 @@ void __init setup_arch(char **cmdline_p) check_ioapic(); -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI /* * Read APIC and some other early information from ACPI tables. */ -- cgit v1.2.2 From 8466361ad5233d4356a4601e16b66c25277920d1 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Wed, 24 Aug 2005 12:09:07 -0400 Subject: [ACPI] delete CONFIG_ACPI_INTERPRETER it is a synonym for CONFIG_ACPI Signed-off-by: Len Brown --- arch/i386/defconfig | 1 - arch/i386/kernel/acpi/boot.c | 8 +++----- arch/i386/kernel/mpparse.c | 4 ++-- arch/i386/kernel/setup.c | 2 +- arch/i386/mach-es7000/es7000plat.c | 4 ++-- arch/ia64/configs/bigsur_defconfig | 1 - arch/ia64/configs/sn2_defconfig | 1 - arch/ia64/configs/tiger_defconfig | 1 - arch/ia64/configs/zx1_defconfig | 1 - arch/ia64/defconfig | 1 - arch/x86_64/defconfig | 1 - 11 files changed, 8 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/i386/defconfig b/arch/i386/defconfig index 1c0076e22dda..f137a32634ac 100644 --- a/arch/i386/defconfig +++ b/arch/i386/defconfig @@ -131,7 +131,6 @@ CONFIG_SOFTWARE_SUSPEND=y # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y -CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_SLEEP_PROC_FS=y CONFIG_ACPI_AC=y diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c index 09700d894668..84befaecedf8 100644 --- a/arch/i386/kernel/acpi/boot.c +++ b/arch/i386/kernel/acpi/boot.c @@ -303,7 +303,7 @@ acpi_parse_lapic_nmi(acpi_table_entry_header * header, const unsigned long end) #endif /*CONFIG_X86_LOCAL_APIC */ -#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_ACPI_INTERPRETER) +#ifdef CONFIG_X86_IO_APIC static int __init acpi_parse_ioapic(acpi_table_entry_header * header, const unsigned long end) @@ -634,10 +634,8 @@ static int __init acpi_parse_fadt(unsigned long phys, unsigned long size) printk(KERN_WARNING PREFIX "Unable to map FADT\n"); return 0; } -#ifdef CONFIG_ACPI_INTERPRETER /* initialize sci_int early for INT_SRC_OVR MADT parsing */ acpi_fadt.sci_int = fadt->sci_int; -#endif #ifdef CONFIG_ACPI_BUS /* initialize rev and apic_phys_dest_mode for x86_64 genapic */ @@ -735,7 +733,7 @@ static int __init acpi_parse_madt_lapic_entries(void) } #endif /* CONFIG_X86_LOCAL_APIC */ -#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_ACPI_INTERPRETER) +#ifdef CONFIG_X86_IO_APIC /* * Parse IOAPIC related entries in MADT * returns 0 on success, < 0 on error @@ -810,7 +808,7 @@ static inline int acpi_parse_madt_ioapic_entries(void) { return -1; } -#endif /* !(CONFIG_X86_IO_APIC && CONFIG_ACPI_INTERPRETER) */ +#endif /* !CONFIG_X86_IO_APIC */ static void __init acpi_process_madt(void) { diff --git a/arch/i386/kernel/mpparse.c b/arch/i386/kernel/mpparse.c index 9a4db7d30001..db90d141481d 100644 --- a/arch/i386/kernel/mpparse.c +++ b/arch/i386/kernel/mpparse.c @@ -854,7 +854,7 @@ void __init mp_register_lapic ( MP_processor_info(&processor); } -#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_ACPI_INTERPRETER) +#ifdef CONFIG_X86_IO_APIC #define MP_ISA_BUS 0 #define MP_MAX_IOAPIC_PIN 127 @@ -1136,5 +1136,5 @@ int mp_register_gsi (u32 gsi, int edge_level, int active_high_low) return gsi; } -#endif /* CONFIG_X86_IO_APIC && CONFIG_ACPI_INTERPRETER */ +#endif /* CONFIG_X86_IO_APIC */ #endif /* CONFIG_ACPI */ diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c index d3943e5edc8f..d52eda399a7a 100644 --- a/arch/i386/kernel/setup.c +++ b/arch/i386/kernel/setup.c @@ -87,7 +87,7 @@ EXPORT_SYMBOL(boot_cpu_data); unsigned long mmu_cr4_features; -#ifdef CONFIG_ACPI_INTERPRETER +#ifdef CONFIG_ACPI int acpi_disabled = 0; #else int acpi_disabled = 1; diff --git a/arch/i386/mach-es7000/es7000plat.c b/arch/i386/mach-es7000/es7000plat.c index baac9da042ce..f549c0efdb9f 100644 --- a/arch/i386/mach-es7000/es7000plat.c +++ b/arch/i386/mach-es7000/es7000plat.c @@ -51,7 +51,7 @@ struct mip_reg *host_reg; int mip_port; unsigned long mip_addr, host_addr; -#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_ACPI_INTERPRETER) +#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_ACPI) /* * GSI override for ES7000 platforms. @@ -73,7 +73,7 @@ es7000_rename_gsi(int ioapic, int gsi) return gsi; } -#endif // (CONFIG_X86_IO_APIC) && (CONFIG_ACPI_INTERPRETER) +#endif /* (CONFIG_X86_IO_APIC) && (CONFIG_ACPI) */ /* * Parse the OEM Table diff --git a/arch/ia64/configs/bigsur_defconfig b/arch/ia64/configs/bigsur_defconfig index 456c65689bef..2c3ba6a6ec7f 100644 --- a/arch/ia64/configs/bigsur_defconfig +++ b/arch/ia64/configs/bigsur_defconfig @@ -107,7 +107,6 @@ CONFIG_ACPI=y # # ACPI (Advanced Configuration and Power Interface) Support # -CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_BUTTON=m CONFIG_ACPI_VIDEO=m CONFIG_ACPI_FAN=m diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig index dc483c18343f..6a0c114e086a 100644 --- a/arch/ia64/configs/sn2_defconfig +++ b/arch/ia64/configs/sn2_defconfig @@ -130,7 +130,6 @@ CONFIG_ACPI=y # # ACPI (Advanced Configuration and Power Interface) Support # -CONFIG_ACPI_INTERPRETER=y # CONFIG_ACPI_BUTTON is not set CONFIG_ACPI_VIDEO=m CONFIG_ACPI_HOTKEY=m diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig index cd2d6375a853..dec24a6de6a4 100644 --- a/arch/ia64/configs/tiger_defconfig +++ b/arch/ia64/configs/tiger_defconfig @@ -128,7 +128,6 @@ CONFIG_ACPI=y # # ACPI (Advanced Configuration and Power Interface) Support # -CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_BUTTON=m # CONFIG_ACPI_VIDEO is not set # CONFIG_ACPI_HOTKEY is not set diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig index cf58404769a8..d318087bfcbd 100644 --- a/arch/ia64/configs/zx1_defconfig +++ b/arch/ia64/configs/zx1_defconfig @@ -128,7 +128,6 @@ CONFIG_ACPI=y # # ACPI (Advanced Configuration and Power Interface) Support # -CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_VIDEO=m CONFIG_ACPI_HOTKEY=m diff --git a/arch/ia64/defconfig b/arch/ia64/defconfig index f38c677f7afd..e6d34df7d2ff 100644 --- a/arch/ia64/defconfig +++ b/arch/ia64/defconfig @@ -118,7 +118,6 @@ CONFIG_ACPI=y # # ACPI (Advanced Configuration and Power Interface) Support # -CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_BUTTON=m CONFIG_ACPI_VIDEO=m CONFIG_ACPI_FAN=m diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig index aed77c1c5ccc..8ccb4a12eed5 100644 --- a/arch/x86_64/defconfig +++ b/arch/x86_64/defconfig @@ -135,7 +135,6 @@ CONFIG_PM_STD_PARTITION="" # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y -CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y -- cgit v1.2.2 From 76f58584824c61eb5b3bdbf019236815921d2e7c Mon Sep 17 00:00:00 2001 From: Len Brown Date: Wed, 24 Aug 2005 12:10:49 -0400 Subject: [ACPI] delete CONFIG_ACPI_BUS it is a synonym for CONFIG_ACPI Signed-off-by: Len Brown --- arch/i386/defconfig | 1 - arch/i386/kernel/acpi/boot.c | 6 ------ arch/i386/kernel/mpparse.c | 4 ---- arch/ia64/configs/bigsur_defconfig | 1 - arch/ia64/configs/sn2_defconfig | 1 - arch/ia64/configs/tiger_defconfig | 1 - arch/ia64/configs/zx1_defconfig | 1 - arch/ia64/defconfig | 1 - arch/x86_64/defconfig | 1 - arch/x86_64/kernel/genapic.c | 4 ++-- arch/x86_64/kernel/mpparse.c | 4 ---- 11 files changed, 2 insertions(+), 23 deletions(-) (limited to 'arch') diff --git a/arch/i386/defconfig b/arch/i386/defconfig index f137a32634ac..1a387856c870 100644 --- a/arch/i386/defconfig +++ b/arch/i386/defconfig @@ -142,7 +142,6 @@ CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_TOSHIBA is not set # CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_BUS=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c index 84befaecedf8..552fc85691ac 100644 --- a/arch/i386/kernel/acpi/boot.c +++ b/arch/i386/kernel/acpi/boot.c @@ -408,8 +408,6 @@ acpi_parse_nmi_src(acpi_table_entry_header * header, const unsigned long end) #endif /* CONFIG_X86_IO_APIC */ -#ifdef CONFIG_ACPI_BUS - /* * acpi_pic_sci_set_trigger() * @@ -460,8 +458,6 @@ void __init acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger) outb(new >> 8, 0x4d1); } -#endif /* CONFIG_ACPI_BUS */ - int acpi_gsi_to_irq(u32 gsi, unsigned int *irq) { #ifdef CONFIG_X86_IO_APIC @@ -637,12 +633,10 @@ static int __init acpi_parse_fadt(unsigned long phys, unsigned long size) /* initialize sci_int early for INT_SRC_OVR MADT parsing */ acpi_fadt.sci_int = fadt->sci_int; -#ifdef CONFIG_ACPI_BUS /* initialize rev and apic_phys_dest_mode for x86_64 genapic */ acpi_fadt.revision = fadt->revision; acpi_fadt.force_apic_physical_destination_mode = fadt->force_apic_physical_destination_mode; -#endif #ifdef CONFIG_X86_PM_TIMER /* detect the location of the ACPI PM Timer */ diff --git a/arch/i386/kernel/mpparse.c b/arch/i386/kernel/mpparse.c index db90d141481d..97dbf289dbd5 100644 --- a/arch/i386/kernel/mpparse.c +++ b/arch/i386/kernel/mpparse.c @@ -1069,11 +1069,9 @@ int mp_register_gsi (u32 gsi, int edge_level, int active_high_low) */ static int gsi_to_irq[MAX_GSI_NUM]; -#ifdef CONFIG_ACPI_BUS /* Don't set up the ACPI SCI because it's already set up */ if (acpi_fadt.sci_int == gsi) return gsi; -#endif ioapic = mp_find_ioapic(gsi); if (ioapic < 0) { @@ -1116,13 +1114,11 @@ int mp_register_gsi (u32 gsi, int edge_level, int active_high_low) if (gsi < MAX_GSI_NUM) { if (gsi > 15) gsi = pci_irq++; -#ifdef CONFIG_ACPI_BUS /* * Don't assign IRQ used by ACPI SCI */ if (gsi == acpi_fadt.sci_int) gsi = pci_irq++; -#endif gsi_to_irq[irq] = gsi; } else { printk(KERN_ERR "GSI %u is too high\n", gsi); diff --git a/arch/ia64/configs/bigsur_defconfig b/arch/ia64/configs/bigsur_defconfig index 2c3ba6a6ec7f..996144e840d3 100644 --- a/arch/ia64/configs/bigsur_defconfig +++ b/arch/ia64/configs/bigsur_defconfig @@ -114,7 +114,6 @@ CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_THERMAL=m CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_BUS=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig index 6a0c114e086a..4644ebea8eab 100644 --- a/arch/ia64/configs/sn2_defconfig +++ b/arch/ia64/configs/sn2_defconfig @@ -138,7 +138,6 @@ CONFIG_ACPI_HOTKEY=m CONFIG_ACPI_NUMA=y CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_BUS=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig index dec24a6de6a4..f5fa113f302d 100644 --- a/arch/ia64/configs/tiger_defconfig +++ b/arch/ia64/configs/tiger_defconfig @@ -137,7 +137,6 @@ CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_THERMAL=m CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_BUS=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig index d318087bfcbd..1e6d286ad0f3 100644 --- a/arch/ia64/configs/zx1_defconfig +++ b/arch/ia64/configs/zx1_defconfig @@ -136,7 +136,6 @@ CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_BUS=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y diff --git a/arch/ia64/defconfig b/arch/ia64/defconfig index e6d34df7d2ff..163ef12641b7 100644 --- a/arch/ia64/defconfig +++ b/arch/ia64/defconfig @@ -127,7 +127,6 @@ CONFIG_ACPI_THERMAL=m CONFIG_ACPI_NUMA=y CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_BUS=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig index 8ccb4a12eed5..62abdc0adab8 100644 --- a/arch/x86_64/defconfig +++ b/arch/x86_64/defconfig @@ -149,7 +149,6 @@ CONFIG_ACPI_NUMA=y CONFIG_ACPI_TOSHIBA=y CONFIG_ACPI_BLACKLIST_YEAR=2001 # CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_BUS=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y diff --git a/arch/x86_64/kernel/genapic.c b/arch/x86_64/kernel/genapic.c index 30c843a5efdd..f031358906f5 100644 --- a/arch/x86_64/kernel/genapic.c +++ b/arch/x86_64/kernel/genapic.c @@ -20,7 +20,7 @@ #include #include -#if defined(CONFIG_ACPI_BUS) +#if defined(CONFIG_ACPI) #include #endif @@ -47,7 +47,7 @@ void __init clustered_apic_check(void) u8 cluster_cnt[NUM_APIC_CLUSTERS]; int num_cpus = 0; -#if defined(CONFIG_ACPI_BUS) +#if defined(CONFIG_ACPI) /* * Some x86_64 machines use physical APIC mode regardless of how many * procs/clusters are present (x86_64 ES7000 is an example). diff --git a/arch/x86_64/kernel/mpparse.c b/arch/x86_64/kernel/mpparse.c index 86445f320d86..8d8ed6ae1d0c 100644 --- a/arch/x86_64/kernel/mpparse.c +++ b/arch/x86_64/kernel/mpparse.c @@ -927,11 +927,9 @@ int mp_register_gsi(u32 gsi, int edge_level, int active_high_low) if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC) return gsi; -#ifdef CONFIG_ACPI_BUS /* Don't set up the ACPI SCI because it's already set up */ if (acpi_fadt.sci_int == gsi) return gsi; -#endif ioapic = mp_find_ioapic(gsi); if (ioapic < 0) { @@ -971,13 +969,11 @@ int mp_register_gsi(u32 gsi, int edge_level, int active_high_low) if (gsi < MAX_GSI_NUM) { if (gsi > 15) gsi = pci_irq++; -#ifdef CONFIG_ACPI_BUS /* * Don't assign IRQ used by ACPI SCI */ if (gsi == acpi_fadt.sci_int) gsi = pci_irq++; -#endif gsi_to_irq[irq] = gsi; } else { printk(KERN_ERR "GSI %u is too high\n", gsi); -- cgit v1.2.2 From eb7b6b32644f7a48357e02f8004f88b3220f3494 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Thu, 25 Aug 2005 12:08:25 -0400 Subject: [ACPI] IA64-related ACPI Kconfig fixes Build issues were mostly in the ACPI=n case -- don't do that. Select ACPI from IA64_GENERIC. Add some missing dependencies on ACPI. Mark BLACKLIST_YEAR and some laptop-only ACPI drivers as X86-only. Let me know when you get an IA64 Laptop. Signed-off-by: Len Brown --- arch/ia64/Kconfig | 32 +++----------------------------- arch/ia64/configs/bigsur_defconfig | 2 -- arch/ia64/configs/sn2_defconfig | 3 --- arch/ia64/configs/tiger_defconfig | 3 --- arch/ia64/configs/zx1_defconfig | 3 --- arch/ia64/defconfig | 2 -- 6 files changed, 3 insertions(+), 42 deletions(-) (limited to 'arch') diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 80988136f26d..addf07393ef4 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -60,6 +60,7 @@ choice config IA64_GENERIC bool "generic" + select ACPI select NUMA select ACPI_NUMA select VIRTUAL_MEM_MAP @@ -340,6 +341,7 @@ config IA64_PALINFO config ACPI_DEALLOCATE_IRQ bool + depends on ACPI depends on IOSAPIC && EXPERIMENTAL default y @@ -351,38 +353,10 @@ endmenu menu "Power management and ACPI" -config PM - bool "Power Management support" - depends on !IA64_HP_SIM - default y - help - "Power Management" means that parts of your computer are shut - off or put into a power conserving "sleep" mode if they are not - being used. There are two competing standards for doing this: APM - and ACPI. If you want to use either one, say Y here and then also - to the requisite support below. - - Power Management is most important for battery powered laptop - computers; if you have a laptop, check out the Linux Laptop home - page on the WWW at and the - Battery Powered Linux mini-HOWTO, available from - . - - Note that, even if you say N here, Linux on the x86 architecture - will issue the hlt instruction if nothing is to be done, thereby - sending the processor to sleep and saving power. - -config ACPI - bool - depends on !IA64_HP_SIM - default y - -if !IA64_HP_SIM +source "kernel/power/Kconfig" source "drivers/acpi/Kconfig" -endif - endmenu if !IA64_HP_SIM diff --git a/arch/ia64/configs/bigsur_defconfig b/arch/ia64/configs/bigsur_defconfig index 996144e840d3..71dcfe0e3f73 100644 --- a/arch/ia64/configs/bigsur_defconfig +++ b/arch/ia64/configs/bigsur_defconfig @@ -108,11 +108,9 @@ CONFIG_ACPI=y # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_VIDEO=m CONFIG_ACPI_FAN=m CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_THERMAL=m -CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig index 4644ebea8eab..ac17ed2ff979 100644 --- a/arch/ia64/configs/sn2_defconfig +++ b/arch/ia64/configs/sn2_defconfig @@ -131,12 +131,9 @@ CONFIG_ACPI=y # ACPI (Advanced Configuration and Power Interface) Support # # CONFIG_ACPI_BUTTON is not set -CONFIG_ACPI_VIDEO=m -CONFIG_ACPI_HOTKEY=m # CONFIG_ACPI_FAN is not set # CONFIG_ACPI_PROCESSOR is not set CONFIG_ACPI_NUMA=y -CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig index f5fa113f302d..3a629414229e 100644 --- a/arch/ia64/configs/tiger_defconfig +++ b/arch/ia64/configs/tiger_defconfig @@ -129,13 +129,10 @@ CONFIG_ACPI=y # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI_BUTTON=m -# CONFIG_ACPI_VIDEO is not set -# CONFIG_ACPI_HOTKEY is not set CONFIG_ACPI_FAN=m CONFIG_ACPI_PROCESSOR=m # CONFIG_ACPI_HOTPLUG_CPU is not set CONFIG_ACPI_THERMAL=m -CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig index 1e6d286ad0f3..84cdf32ede7c 100644 --- a/arch/ia64/configs/zx1_defconfig +++ b/arch/ia64/configs/zx1_defconfig @@ -129,12 +129,9 @@ CONFIG_ACPI=y # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI_BUTTON=y -CONFIG_ACPI_VIDEO=m -CONFIG_ACPI_HOTKEY=m CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y -CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y diff --git a/arch/ia64/defconfig b/arch/ia64/defconfig index 163ef12641b7..7002d5a3cc14 100644 --- a/arch/ia64/defconfig +++ b/arch/ia64/defconfig @@ -119,13 +119,11 @@ CONFIG_ACPI=y # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_VIDEO=m CONFIG_ACPI_FAN=m CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=m CONFIG_ACPI_NUMA=y -CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y -- cgit v1.2.2 From 6153df7b2f4d27c8bde054db1b947369a6f64d83 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Thu, 25 Aug 2005 12:27:09 -0400 Subject: [ACPI] delete CONFIG_ACPI_PCI Delete the ability to build an ACPI kernel that does not include PCI support. When such a machine is created and it requires a tuned kernel, send a patch. http://bugzilla.kernel.org/show_bug.cgi?id=1364 Signed-off-by: Len Brown --- arch/i386/defconfig | 1 - arch/i386/kernel/acpi/boot.c | 9 --------- arch/i386/pci/Makefile | 2 +- arch/i386/pci/irq.c | 2 +- arch/ia64/configs/bigsur_defconfig | 1 - arch/ia64/configs/sn2_defconfig | 1 - arch/ia64/configs/tiger_defconfig | 1 - arch/ia64/configs/zx1_defconfig | 1 - arch/ia64/defconfig | 1 - arch/x86_64/defconfig | 1 - arch/x86_64/pci/Makefile | 2 +- arch/x86_64/pci/Makefile-BUS | 2 +- 12 files changed, 4 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/i386/defconfig b/arch/i386/defconfig index 1a387856c870..6a431b926019 100644 --- a/arch/i386/defconfig +++ b/arch/i386/defconfig @@ -144,7 +144,6 @@ CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # CONFIG_X86_PM_TIMER is not set diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c index 552fc85691ac..0fb23c30eb98 100644 --- a/arch/i386/kernel/acpi/boot.c +++ b/arch/i386/kernel/acpi/boot.c @@ -66,13 +66,8 @@ static inline int ioapic_setup_disabled(void) #define PREFIX "ACPI: " -#ifdef CONFIG_ACPI_PCI int acpi_noirq __initdata; /* skip ACPI IRQ initialization */ int acpi_pci_disabled __initdata; /* skip ACPI PCI scan and IRQ initialization */ -#else -int acpi_noirq __initdata = 1; -int acpi_pci_disabled __initdata = 1; -#endif int acpi_ht __initdata = 1; /* enable HT */ int acpi_lapic; @@ -849,7 +844,6 @@ extern int acpi_force; #ifdef __i386__ -#ifdef CONFIG_ACPI_PCI static int __init disable_acpi_irq(struct dmi_system_id *d) { if (!acpi_force) { @@ -869,7 +863,6 @@ static int __init disable_acpi_pci(struct dmi_system_id *d) } return 0; } -#endif static int __init dmi_disable_acpi(struct dmi_system_id *d) { @@ -1017,7 +1010,6 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = { }, }, -#ifdef CONFIG_ACPI_PCI /* * Boxes that need ACPI PCI IRQ routing disabled */ @@ -1055,7 +1047,6 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"), }, }, -#endif {} }; diff --git a/arch/i386/pci/Makefile b/arch/i386/pci/Makefile index 1bff03f36965..ead6122dd06d 100644 --- a/arch/i386/pci/Makefile +++ b/arch/i386/pci/Makefile @@ -5,7 +5,7 @@ obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o obj-$(CONFIG_PCI_DIRECT) += direct.o pci-y := fixup.o -pci-$(CONFIG_ACPI_PCI) += acpi.o +pci-$(CONFIG_ACPI) += acpi.o pci-y += legacy.o irq.o pci-$(CONFIG_X86_VISWS) := visws.o fixup.o diff --git a/arch/i386/pci/irq.c b/arch/i386/pci/irq.c index 86348b68fda1..326a2edc3834 100644 --- a/arch/i386/pci/irq.c +++ b/arch/i386/pci/irq.c @@ -1075,7 +1075,7 @@ static void pirq_penalize_isa_irq(int irq, int active) void pcibios_penalize_isa_irq(int irq, int active) { -#ifdef CONFIG_ACPI_PCI +#ifdef CONFIG_ACPI if (!acpi_noirq) acpi_penalize_isa_irq(irq, active); else diff --git a/arch/ia64/configs/bigsur_defconfig b/arch/ia64/configs/bigsur_defconfig index 71dcfe0e3f73..3b65cbb31b1d 100644 --- a/arch/ia64/configs/bigsur_defconfig +++ b/arch/ia64/configs/bigsur_defconfig @@ -113,7 +113,6 @@ CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_THERMAL=m # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig index ac17ed2ff979..1ca6e6e11b42 100644 --- a/arch/ia64/configs/sn2_defconfig +++ b/arch/ia64/configs/sn2_defconfig @@ -136,7 +136,6 @@ CONFIG_ACPI=y CONFIG_ACPI_NUMA=y # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_CONTAINER is not set diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig index 3a629414229e..3ec94a12eac0 100644 --- a/arch/ia64/configs/tiger_defconfig +++ b/arch/ia64/configs/tiger_defconfig @@ -135,7 +135,6 @@ CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_THERMAL=m # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_CONTAINER is not set diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig index 84cdf32ede7c..d4cf73d124bc 100644 --- a/arch/ia64/configs/zx1_defconfig +++ b/arch/ia64/configs/zx1_defconfig @@ -134,7 +134,6 @@ CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_CONTAINER is not set diff --git a/arch/ia64/defconfig b/arch/ia64/defconfig index 7002d5a3cc14..b6ec8d32c346 100644 --- a/arch/ia64/defconfig +++ b/arch/ia64/defconfig @@ -126,7 +126,6 @@ CONFIG_ACPI_THERMAL=m CONFIG_ACPI_NUMA=y # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y CONFIG_ACPI_CONTAINER=m diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig index 62abdc0adab8..b95c6cf26591 100644 --- a/arch/x86_64/defconfig +++ b/arch/x86_64/defconfig @@ -151,7 +151,6 @@ CONFIG_ACPI_BLACKLIST_YEAR=2001 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_CONTAINER is not set diff --git a/arch/x86_64/pci/Makefile b/arch/x86_64/pci/Makefile index 37c92e841dec..bb34e5ef916c 100644 --- a/arch/x86_64/pci/Makefile +++ b/arch/x86_64/pci/Makefile @@ -8,7 +8,7 @@ CFLAGS += -Iarch/i386/pci obj-y := i386.o obj-$(CONFIG_PCI_DIRECT)+= direct.o obj-y += fixup.o -obj-$(CONFIG_ACPI_PCI) += acpi.o +obj-$(CONFIG_ACPI) += acpi.o obj-y += legacy.o irq.o common.o # mmconfig has a 64bit special obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o diff --git a/arch/x86_64/pci/Makefile-BUS b/arch/x86_64/pci/Makefile-BUS index 291985f0d2e4..4f0c05abd408 100644 --- a/arch/x86_64/pci/Makefile-BUS +++ b/arch/x86_64/pci/Makefile-BUS @@ -8,7 +8,7 @@ CFLAGS += -I arch/i386/pci obj-y := i386.o obj-$(CONFIG_PCI_DIRECT)+= direct.o obj-y += fixup.o -obj-$(CONFIG_ACPI_PCI) += acpi.o +obj-$(CONFIG_ACPI) += acpi.o obj-y += legacy.o irq.o common.o # mmconfig has a 64bit special obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o -- cgit v1.2.2 From d0d59b98d7a0b3801ce03e695ba885b698a6d122 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Thu, 25 Aug 2005 12:41:22 -0400 Subject: [IA64] fix allnoconfig build cc: Tony Luck Signed-off-by: Len Brown --- arch/ia64/sn/kernel/irq.c | 2 +- arch/ia64/sn/kernel/sn2/sn_proc_fs.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/ia64/sn/kernel/irq.c b/arch/ia64/sn/kernel/irq.c index 84d276a14ecb..392bf8a072b6 100644 --- a/arch/ia64/sn/kernel/irq.c +++ b/arch/ia64/sn/kernel/irq.c @@ -23,7 +23,7 @@ static void force_interrupt(int irq); static void register_intr_pda(struct sn_irq_info *sn_irq_info); static void unregister_intr_pda(struct sn_irq_info *sn_irq_info); -extern int sn_force_interrupt_flag; +int sn_force_interrupt_flag = 1; extern int sn_ioif_inited; static struct list_head **sn_irq_lh; static spinlock_t sn_irq_info_lock = SPIN_LOCK_UNLOCKED; /* non-IRQ lock */ diff --git a/arch/ia64/sn/kernel/sn2/sn_proc_fs.c b/arch/ia64/sn/kernel/sn2/sn_proc_fs.c index 6a80fca807b9..266a3a84c01d 100644 --- a/arch/ia64/sn/kernel/sn2/sn_proc_fs.c +++ b/arch/ia64/sn/kernel/sn2/sn_proc_fs.c @@ -52,7 +52,7 @@ static int licenseID_open(struct inode *inode, struct file *file) * the bridge chip. The hardware will then send an interrupt message if the * interrupt line is active. This mimics a level sensitive interrupt. */ -int sn_force_interrupt_flag = 1; +extern int sn_force_interrupt_flag; static int sn_force_interrupt_show(struct seq_file *s, void *p) { -- cgit v1.2.2 From d395bf12d1ba61437e546eb642f0d7ea666123ff Mon Sep 17 00:00:00 2001 From: Venkatesh Pallipadi Date: Thu, 25 Aug 2005 15:59:00 -0400 Subject: [ACPI] Reduce acpi-cpufreq switching latency by 50% The acpi-cpufreq driver does a P-state get after a P-state set to verify whether set went through successfully. This test is kind of redundant as set goes throught most of the times, and the test is also expensive as a get of P-states can take a lot of time (same as a set operation) as it goes through SMM mode. Effectively, we are doubling the P-state latency due to this get opertion. momdule parameter "acpi_pstate_strict" restores orginal paranoia. http://bugzilla.kernel.org/show_bug.cgi?id=5129 Signed-off-by: Venkatesh Pallipadi Signed-off-by: Len Brown --- arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c | 57 ++++++++++++++++++----------- 1 file changed, 36 insertions(+), 21 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c index 60a9e54dd20e..822c8ce9d1f1 100644 --- a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include #include @@ -57,6 +58,8 @@ static struct cpufreq_acpi_io *acpi_io_data[NR_CPUS]; static struct cpufreq_driver acpi_cpufreq_driver; +static unsigned int acpi_pstate_strict; + static int acpi_processor_write_port( u16 port, @@ -163,34 +166,44 @@ acpi_processor_set_performance ( } /* - * Then we read the 'status_register' and compare the value with the - * target state's 'status' to make sure the transition was successful. - * Note that we'll poll for up to 1ms (100 cycles of 10us) before - * giving up. + * Assume the write went through when acpi_pstate_strict is not used. + * As read status_register is an expensive operation and there + * are no specific error cases where an IO port write will fail. */ - - port = data->acpi_data.status_register.address; - bit_width = data->acpi_data.status_register.bit_width; - - dprintk("Looking for 0x%08x from port 0x%04x\n", - (u32) data->acpi_data.states[state].status, port); - - for (i=0; i<100; i++) { - ret = acpi_processor_read_port(port, bit_width, &value); - if (ret) { - dprintk("Invalid port width 0x%04x\n", bit_width); - retval = ret; - goto migrate_end; + if (acpi_pstate_strict) { + /* Then we read the 'status_register' and compare the value + * with the target state's 'status' to make sure the + * transition was successful. + * Note that we'll poll for up to 1ms (100 cycles of 10us) + * before giving up. + */ + + port = data->acpi_data.status_register.address; + bit_width = data->acpi_data.status_register.bit_width; + + dprintk("Looking for 0x%08x from port 0x%04x\n", + (u32) data->acpi_data.states[state].status, port); + + for (i=0; i<100; i++) { + ret = acpi_processor_read_port(port, bit_width, &value); + if (ret) { + dprintk("Invalid port width 0x%04x\n", bit_width); + retval = ret; + goto migrate_end; + } + if (value == (u32) data->acpi_data.states[state].status) + break; + udelay(10); } - if (value == (u32) data->acpi_data.states[state].status) - break; - udelay(10); + } else { + i = 0; + value = (u32) data->acpi_data.states[state].status; } /* notify cpufreq */ cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_POSTCHANGE); - if (value != (u32) data->acpi_data.states[state].status) { + if (unlikely(value != (u32) data->acpi_data.states[state].status)) { unsigned int tmp = cpufreq_freqs.new; cpufreq_freqs.new = cpufreq_freqs.old; cpufreq_freqs.old = tmp; @@ -537,6 +550,8 @@ acpi_cpufreq_exit (void) return; } +module_param(acpi_pstate_strict, uint, 0644); +MODULE_PARM_DESC(acpi_pstate_strict, "value 0 or non-zero. non-zero -> strict ACPI checks are performed during frequency changes."); late_initcall(acpi_cpufreq_init); module_exit(acpi_cpufreq_exit); -- cgit v1.2.2 From 2be863c959ea22ac9eb83e30f6cd92a8ae78bfdc Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 6 Sep 2005 23:13:17 +0100 Subject: [ARM] Fix missed initialisers/missing comma Fix the broken initialisers missed by the recent IRQ patch. Signed-off-by: Russell King --- arch/arm/mach-ixp2000/core.c | 2 +- arch/arm/mach-ixp4xx/common.c | 16 ++++++++-------- arch/arm/mach-omap1/irq.c | 8 ++++---- 3 files changed, 13 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c index 781d10ae00b7..098c817a7fb8 100644 --- a/arch/arm/mach-ixp2000/core.c +++ b/arch/arm/mach-ixp2000/core.c @@ -382,7 +382,7 @@ static void ixp2000_GPIO_irq_unmask(unsigned int irq) static struct irqchip ixp2000_GPIO_irq_chip = { .ack = ixp2000_GPIO_irq_mask_ack, .mask = ixp2000_GPIO_irq_mask, - .unmask = ixp2000_GPIO_irq_unmask + .unmask = ixp2000_GPIO_irq_unmask, .set_type = ixp2000_GPIO_irq_type, }; diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 0422e906cc9a..52ad11328e96 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -179,17 +179,17 @@ static void ixp4xx_irq_level_unmask(unsigned int irq) } static struct irqchip ixp4xx_irq_level_chip = { - .ack = ixp4xx_irq_mask, - .mask = ixp4xx_irq_mask, - .unmask = ixp4xx_irq_level_unmask, - .type = ixp4xx_set_irq_type + .ack = ixp4xx_irq_mask, + .mask = ixp4xx_irq_mask, + .unmask = ixp4xx_irq_level_unmask, + .set_type = ixp4xx_set_irq_type, }; static struct irqchip ixp4xx_irq_edge_chip = { - .ack = ixp4xx_irq_ack, - .mask = ixp4xx_irq_mask, - .unmask = ixp4xx_irq_unmask, - .type = ixp4xx_set_irq_type + .ack = ixp4xx_irq_ack, + .mask = ixp4xx_irq_mask, + .unmask = ixp4xx_irq_unmask, + .set_type = ixp4xx_set_irq_type, }; static void ixp4xx_config_irq(unsigned irq, enum ixp4xx_irq_type type) diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index a11b6d807352..afd5d67e4ae7 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -165,10 +165,10 @@ static struct omap_irq_bank omap1610_irq_banks[] = { #endif static struct irqchip omap_irq_chip = { - .ack = omap_mask_ack_irq, - .mask = omap_mask_irq, - .unmask = omap_unmask_irq, - .wake = omap_wake_irq, + .ack = omap_mask_ack_irq, + .mask = omap_mask_irq, + .unmask = omap_unmask_irq, + .set_wake = omap_wake_irq, }; void __init omap_init_irq(void) -- cgit v1.2.2 From 09bbe1043a65903c93f6b6df123e36e3584bfac7 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 6 Sep 2005 20:12:15 -0700 Subject: [SPARC64]: Fix set/get MTU cases in sunos_ioctl() Need to use compat struct sizes and compat_sys_ioctl(). Reported by Adrian Bunk via kernel bugzilla #2683 Signed-off-by: David S. Miller --- arch/sparc64/kernel/sunos_ioctl32.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/sunos_ioctl32.c b/arch/sparc64/kernel/sunos_ioctl32.c index 87c1aeb02220..7654b8a7f03a 100644 --- a/arch/sparc64/kernel/sunos_ioctl32.c +++ b/arch/sparc64/kernel/sunos_ioctl32.c @@ -152,11 +152,12 @@ asmlinkage int sunos_ioctl (int fd, u32 cmd, u32 arg) ret = compat_sys_ioctl(fd, SIOCGIFCONF, arg); goto out; - case _IOW('i', 21, struct ifreq): /* SIOCSIFMTU */ - ret = sys_ioctl(fd, SIOCSIFMTU, arg); + case _IOW('i', 21, struct ifreq32): + ret = compat_sys_ioctl(fd, SIOCSIFMTU, arg); goto out; - case _IOWR('i', 22, struct ifreq): /* SIOCGIFMTU */ - ret = sys_ioctl(fd, SIOCGIFMTU, arg); + + case _IOWR('i', 22, struct ifreq32): + ret = compat_sys_ioctl(fd, SIOCGIFMTU, arg); goto out; case _IOWR('i', 23, struct ifreq32): -- cgit v1.2.2 From 7efb833d645d10258e32664404354d26cf6070e3 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 7 Sep 2005 11:49:23 +0100 Subject: [ARM] 2889/1: S3C2410 - Add machine Anubis Patch from Ben Dooks Add the Simtec Anubis to the list of supported machines in the arch/arm/mach-s3c2410 directory. This ensures the core peripherals are registered, the timer source is configured and the correct power-management is enabled. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/Kconfig | 7 + arch/arm/mach-s3c2410/Makefile | 1 + arch/arm/mach-s3c2410/mach-anubis.c | 270 ++++++++++++++++++++++++++++++++++++ arch/arm/mach-s3c2410/pm-simtec.c | 2 +- arch/arm/mach-s3c2410/time.c | 2 +- 5 files changed, 280 insertions(+), 2 deletions(-) create mode 100644 arch/arm/mach-s3c2410/mach-anubis.c (limited to 'arch') diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index d4d03d0daaec..da818344f954 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -2,6 +2,13 @@ if ARCH_S3C2410 menu "S3C24XX Implementations" +config MACH_ANUBIS + bool "Simtec Electronics ANUBIS" + select CPU_S3C2440 + help + Say Y gere if you are using the Simtec Electronics ANUBIS + development system + config ARCH_BAST bool "Simtec Electronics BAST (EB2410ITX)" select CPU_S3C2410 diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index 55ed7c7e57da..023c4f59a345 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_CPU_S3C2440) += s3c2440-clock.o # machine specific support +obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o obj-$(CONFIG_ARCH_H1940) += mach-h1940.o obj-$(CONFIG_MACH_N30) += mach-n30.o diff --git a/arch/arm/mach-s3c2410/mach-anubis.c b/arch/arm/mach-s3c2410/mach-anubis.c new file mode 100644 index 000000000000..f87aa0b669ad --- /dev/null +++ b/arch/arm/mach-s3c2410/mach-anubis.c @@ -0,0 +1,270 @@ +/* linux/arch/arm/mach-s3c2410/mach-anubis.c + * + * Copyright (c) 2003-2005 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Modifications: + * 02-May-2005 BJD Copied from mach-bast.c +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "clock.h" +#include "devs.h" +#include "cpu.h" + +#define COPYRIGHT ", (c) 2005 Simtec Electronics" + +static struct map_desc anubis_iodesc[] __initdata = { + /* ISA IO areas */ + + { (u32)S3C24XX_VA_ISA_BYTE, 0x0, SZ_16M, MT_DEVICE }, + { (u32)S3C24XX_VA_ISA_WORD, 0x0, SZ_16M, MT_DEVICE }, + + /* we could possibly compress the next set down into a set of smaller tables + * pagetables, but that would mean using an L2 section, and it still means + * we cannot actually feed the same register to an LDR due to 16K spacing + */ + + /* CPLD control registers */ + + { (u32)ANUBIS_VA_CTRL1, ANUBIS_PA_CTRL1, SZ_4K, MT_DEVICE }, + { (u32)ANUBIS_VA_CTRL2, ANUBIS_PA_CTRL2, SZ_4K, MT_DEVICE }, + + /* IDE drives */ + + { (u32)ANUBIS_IDEPRI, S3C2410_CS3, SZ_1M, MT_DEVICE }, + { (u32)ANUBIS_IDEPRIAUX, S3C2410_CS3+(1<<26), SZ_1M, MT_DEVICE }, + + { (u32)ANUBIS_IDESEC, S3C2410_CS4, SZ_1M, MT_DEVICE }, + { (u32)ANUBIS_IDESECAUX, S3C2410_CS4+(1<<26), SZ_1M, MT_DEVICE }, +}; + +#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK +#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB +#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE + +static struct s3c24xx_uart_clksrc anubis_serial_clocks[] = { + [0] = { + .name = "uclk", + .divisor = 1, + .min_baud = 0, + .max_baud = 0, + }, + [1] = { + .name = "pclk", + .divisor = 1, + .min_baud = 0, + .max_baud = 0. + } +}; + + +static struct s3c2410_uartcfg anubis_uartcfgs[] = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + .clocks = anubis_serial_clocks, + .clocks_size = ARRAY_SIZE(anubis_serial_clocks) + }, + [1] = { + .hwport = 2, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + .clocks = anubis_serial_clocks, + .clocks_size = ARRAY_SIZE(anubis_serial_clocks) + }, +}; + +/* NAND Flash on Anubis board */ + +static int external_map[] = { 2 }; +static int chip0_map[] = { 0 }; +static int chip1_map[] = { 1 }; + +struct mtd_partition anubis_default_nand_part[] = { + [0] = { + .name = "Boot Agent", + .size = SZ_16K, + .offset = 0 + }, + [1] = { + .name = "/boot", + .size = SZ_4M - SZ_16K, + .offset = SZ_16K, + }, + [2] = { + .name = "user1", + .offset = SZ_4M, + .size = SZ_32M - SZ_4M, + }, + [3] = { + .name = "user2", + .offset = SZ_32M, + .size = MTDPART_SIZ_FULL, + } +}; + +/* the Anubis has 3 selectable slots for nand-flash, the two + * on-board chip areas, as well as the external slot. + * + * Note, there is no current hot-plug support for the External + * socket. +*/ + +static struct s3c2410_nand_set anubis_nand_sets[] = { + [1] = { + .name = "External", + .nr_chips = 1, + .nr_map = external_map, + .nr_partitions = ARRAY_SIZE(anubis_default_nand_part), + .partitions = anubis_default_nand_part + }, + [0] = { + .name = "chip0", + .nr_chips = 1, + .nr_map = chip0_map, + .nr_partitions = ARRAY_SIZE(anubis_default_nand_part), + .partitions = anubis_default_nand_part + }, + [2] = { + .name = "chip1", + .nr_chips = 1, + .nr_map = chip1_map, + .nr_partitions = ARRAY_SIZE(anubis_default_nand_part), + .partitions = anubis_default_nand_part + }, +}; + +static void anubis_nand_select(struct s3c2410_nand_set *set, int slot) +{ + unsigned int tmp; + + slot = set->nr_map[slot] & 3; + + pr_debug("anubis_nand: selecting slot %d (set %p,%p)\n", + slot, set, set->nr_map); + + tmp = __raw_readb(ANUBIS_VA_CTRL1); + tmp &= ~ANUBIS_CTRL1_NANDSEL; + tmp |= slot; + + pr_debug("anubis_nand: ctrl1 now %02x\n", tmp); + + __raw_writeb(tmp, ANUBIS_VA_CTRL1); +} + +static struct s3c2410_platform_nand anubis_nand_info = { + .tacls = 25, + .twrph0 = 80, + .twrph1 = 80, + .nr_sets = ARRAY_SIZE(anubis_nand_sets), + .sets = anubis_nand_sets, + .select_chip = anubis_nand_select, +}; + + +/* Standard Anubis devices */ + +static struct platform_device *anubis_devices[] __initdata = { + &s3c_device_usb, + &s3c_device_wdt, + &s3c_device_adc, + &s3c_device_i2c, + &s3c_device_rtc, + &s3c_device_nand, +}; + +static struct clk *anubis_clocks[] = { + &s3c24xx_dclk0, + &s3c24xx_dclk1, + &s3c24xx_clkout0, + &s3c24xx_clkout1, + &s3c24xx_uclk, +}; + +static struct s3c24xx_board anubis_board __initdata = { + .devices = anubis_devices, + .devices_count = ARRAY_SIZE(anubis_devices), + .clocks = anubis_clocks, + .clocks_count = ARRAY_SIZE(anubis_clocks) +}; + +void __init anubis_map_io(void) +{ + /* initialise the clocks */ + + s3c24xx_dclk0.parent = NULL; + s3c24xx_dclk0.rate = 12*1000*1000; + + s3c24xx_dclk1.parent = NULL; + s3c24xx_dclk1.rate = 24*1000*1000; + + s3c24xx_clkout0.parent = &s3c24xx_dclk0; + s3c24xx_clkout1.parent = &s3c24xx_dclk1; + + s3c24xx_uclk.parent = &s3c24xx_clkout1; + + s3c_device_nand.dev.platform_data = &anubis_nand_info; + + s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc)); + s3c24xx_init_clocks(0); + s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs)); + s3c24xx_set_board(&anubis_board); + + /* ensure that the GPIO is setup */ + s3c2410_gpio_setpin(S3C2410_GPA0, 1); +} + +MACHINE_START(ANUBIS, "Simtec-Anubis") + /* Maintainer: Ben Dooks */ + .phys_ram = S3C2410_SDRAM_PA, + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, + .map_io = anubis_map_io, + .init_irq = s3c24xx_init_irq, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s3c2410/pm-simtec.c b/arch/arm/mach-s3c2410/pm-simtec.c index 2cb798832223..4c7ccef6c207 100644 --- a/arch/arm/mach-s3c2410/pm-simtec.c +++ b/arch/arm/mach-s3c2410/pm-simtec.c @@ -48,7 +48,7 @@ static __init int pm_simtec_init(void) /* check which machine we are running on */ - if (!machine_is_bast() && !machine_is_vr1000()) + if (!machine_is_bast() && !machine_is_vr1000() && !machine_is_anubis()) return 0; printk(KERN_INFO "Simtec Board Power Manangement" COPYRIGHT "\n"); diff --git a/arch/arm/mach-s3c2410/time.c b/arch/arm/mach-s3c2410/time.c index 765a3a9ae032..c0acfb2ad790 100644 --- a/arch/arm/mach-s3c2410/time.c +++ b/arch/arm/mach-s3c2410/time.c @@ -164,7 +164,7 @@ static void s3c2410_timer_setup (void) /* configure the system for whichever machine is in use */ - if (machine_is_bast() || machine_is_vr1000()) { + if (machine_is_bast() || machine_is_vr1000() || machine_is_anubis()) { /* timer is at 12MHz, scaler is 1 */ timer_usec_ticks = timer_mask_usec_ticks(1, 12000000); tcnt = 12000000 / HZ; -- cgit v1.2.2 From 92105bb70634abacc08bbe12bf6f888fbd7dad38 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 7 Sep 2005 17:20:26 +0100 Subject: [ARM] 2887/1: OMAP 2/4: Update files common to omap1 and omap2, take 2 Patch from Tony Lindgren This patch syncs the mainline kernel with linux-omap tree. The highlights of the patch are: - Clock updates by Tuukka Tikkanen, Juha Yrjola, Daniel Petrini and Tony Lindgren - DMA fixes by Imre Deak, Juha Yrjola and Daniel Petrini - Add support to dual-mode hardware timers by Lauri Leukkunen - GPIO support for 24xx by Paul Mundt - GPIO wake-up support by Tony Lindgren - Better GPIO interrupt handler to not lose interrupts by Ralph Walden and Ladislav Michl - Power Management updates by Tuukka Tikkanen - Make Power Management code use new SRAM functions by Tony Lindgren Signed-off-by: Tony Lindgren Signed-off-by: Russell King --- arch/arm/plat-omap/Kconfig | 16 ++ arch/arm/plat-omap/Makefile | 4 +- arch/arm/plat-omap/clock.c | 39 +++- arch/arm/plat-omap/common.c | 7 +- arch/arm/plat-omap/dma.c | 25 ++- arch/arm/plat-omap/dmtimer.c | 260 +++++++++++++++++++++ arch/arm/plat-omap/gpio.c | 524 ++++++++++++++++++++++++++++++++++--------- arch/arm/plat-omap/mcbsp.c | 9 +- arch/arm/plat-omap/mux.c | 3 + arch/arm/plat-omap/ocpi.c | 1 + arch/arm/plat-omap/pm.c | 255 ++++++++++----------- arch/arm/plat-omap/sleep.S | 83 ++++--- arch/arm/plat-omap/sram-fn.S | 58 +++++ arch/arm/plat-omap/sram.c | 116 ++++++++++ arch/arm/plat-omap/sram.h | 21 ++ arch/arm/plat-omap/usb.c | 1 + 16 files changed, 1115 insertions(+), 307 deletions(-) create mode 100644 arch/arm/plat-omap/dmtimer.c create mode 100644 arch/arm/plat-omap/sram-fn.S create mode 100644 arch/arm/plat-omap/sram.c create mode 100644 arch/arm/plat-omap/sram.h (limited to 'arch') diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index 345365852f8c..9693e9b4ffd1 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -91,6 +91,13 @@ config OMAP_32K_TIMER_HZ Kernel internal timer frequency should be a divisor of 32768, such as 64 or 128. +config OMAP_DM_TIMER + bool "Use dual-mode timer" + default n + depends on ARCH_OMAP16XX + help + Select this option if you want to use OMAP Dual-Mode timers. + choice prompt "Low-level debug console UART" depends on ARCH_OMAP @@ -107,6 +114,15 @@ config OMAP_LL_DEBUG_UART3 endchoice +config OMAP_SERIAL_WAKE + bool "Enable wake-up events for serial ports" + depends OMAP_MUX + default y + help + Select this option if you want to have your system wake up + to data on the serial RX line. This allows you to wake the + system from serial console. + endmenu endif diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 531e11af54d4..7e144f9cad1c 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := common.o dma.o clock.o mux.o gpio.o mcbsp.o usb.o +obj-y := common.o sram.o sram-fn.o clock.o dma.o mux.o gpio.o mcbsp.o usb.o obj-m := obj-n := obj- := @@ -15,3 +15,5 @@ obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o obj-$(CONFIG_PM) += pm.o sleep.o obj-$(CONFIG_CPU_FREQ) += cpu-omap.o +obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o + diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 59d91b3262ba..52a58b2da288 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -21,6 +21,7 @@ #include #include "clock.h" +#include "sram.h" static LIST_HEAD(clocks); static DECLARE_MUTEX(clocks_sem); @@ -141,7 +142,7 @@ static struct clk arm_ck = { static struct clk armper_ck = { .name = "armper_ck", .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP730 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | RATE_CKCTL, .enable_reg = ARM_IDLECT2, .enable_bit = EN_PERCK, @@ -385,7 +386,8 @@ static struct clk uart2_ck = { .name = "uart2_ck", /* Direct from ULPD, no parent */ .rate = 12000000, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | ENABLE_REG_32BIT, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | ENABLE_REG_32BIT | + ALWAYS_ENABLED, .enable_reg = MOD_CONF_CTRL_0, .enable_bit = 30, /* Chooses between 12MHz and 48MHz */ .set_rate = &set_uart_rate, @@ -443,6 +445,15 @@ static struct clk usb_hhc_ck16xx = { .enable_bit = 8 /* UHOST_EN */, }; +static struct clk usb_dc_ck = { + .name = "usb_dc_ck", + /* Direct from ULPD, no parent */ + .rate = 48000000, + .flags = CLOCK_IN_OMAP16XX | RATE_FIXED, + .enable_reg = SOFT_REQ_REG, + .enable_bit = 4, +}; + static struct clk mclk_1510 = { .name = "mclk", /* Direct from ULPD, no parent. May be enabled by ext hardware. */ @@ -552,6 +563,7 @@ static struct clk * onchip_clks[] = { &uart3_16xx, &usb_clko, &usb_hhc_ck1510, &usb_hhc_ck16xx, + &usb_dc_ck, &mclk_1510, &mclk_16xx, &bclk_1510, &bclk_16xx, &mmc1_ck, @@ -946,14 +958,13 @@ static int select_table_rate(struct clk * clk, unsigned long rate) if (!ptr->rate) return -EINVAL; - if (!ptr->rate) - return -EINVAL; + /* + * In most cases we should not need to reprogram DPLL. + * Reprogramming the DPLL is tricky, it must be done from SRAM. + */ + omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val); - if (unlikely(ck_dpll1.rate == 0)) { - omap_writew(ptr->dpllctl_val, DPLL_CTL); - ck_dpll1.rate = ptr->pll_rate; - } - omap_writew(ptr->ckctl_val, ARM_CKCTL); + ck_dpll1.rate = ptr->pll_rate; propagate_rate(&ck_dpll1); return 0; } @@ -1224,9 +1235,11 @@ int __init clk_init(void) #endif /* Cache rates for clocks connected to ck_ref (not dpll1) */ propagate_rate(&ck_ref); - printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): %ld.%01ld/%ld/%ld MHz\n", + printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): " + "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n", ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10, - ck_dpll1.rate, arm_ck.rate); + ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10, + arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10); #ifdef CONFIG_MACH_OMAP_PERSEUS2 /* Select slicer output as OMAP input clock */ @@ -1271,7 +1284,9 @@ static int __init omap_late_clk_reset(void) struct clk *p; __u32 regval32; - omap_writew(0, SOFT_REQ_REG); + /* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */ + regval32 = omap_readw(SOFT_REQ_REG) & (1 << 4); + omap_writew(regval32, SOFT_REQ_REG); omap_writew(0, SOFT_REQ_REG2); list_for_each_entry(p, &clocks, node) { diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index ea967a8f6ce5..6cb20aea7f51 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include @@ -35,11 +36,11 @@ #define NO_LENGTH_CHECK 0xffffffff -extern int omap_bootloader_tag_len; -extern u8 omap_bootloader_tag[]; +unsigned char omap_bootloader_tag[512]; +int omap_bootloader_tag_len; struct omap_board_config_kernel *omap_board_config; -int omap_board_config_size = 0; +int omap_board_config_size; static const void *get_config(u16 tag, size_t len, int skip, size_t *len_out) { diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index c0a5c2fa42bd..da7b65145658 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -425,7 +425,7 @@ static int dma_handle_ch(int ch) dma_chan[ch + 6].saved_csr = csr >> 7; csr &= 0x7f; } - if (!csr) + if ((csr & 0x3f) == 0) return 0; if (unlikely(dma_chan[ch].dev_id == -1)) { printk(KERN_WARNING "Spurious interrupt from DMA channel %d (CSR %04x)\n", @@ -890,11 +890,11 @@ void omap_enable_lcd_dma(void) w |= 1 << 8; omap_writew(w, OMAP1610_DMA_LCD_CTRL); + lcd_dma.active = 1; + w = omap_readw(OMAP1610_DMA_LCD_CCR); w |= 1 << 7; omap_writew(w, OMAP1610_DMA_LCD_CCR); - - lcd_dma.active = 1; } void omap_setup_lcd_dma(void) @@ -965,8 +965,8 @@ void omap_clear_dma(int lch) */ dma_addr_t omap_get_dma_src_pos(int lch) { - return (dma_addr_t) (OMAP_DMA_CSSA_L(lch) | - (OMAP_DMA_CSSA_U(lch) << 16)); + return (dma_addr_t) (omap_readw(OMAP_DMA_CSSA_L(lch)) | + (omap_readw(OMAP_DMA_CSSA_U(lch)) << 16)); } /* @@ -979,8 +979,18 @@ dma_addr_t omap_get_dma_src_pos(int lch) */ dma_addr_t omap_get_dma_dst_pos(int lch) { - return (dma_addr_t) (OMAP_DMA_CDSA_L(lch) | - (OMAP_DMA_CDSA_U(lch) << 16)); + return (dma_addr_t) (omap_readw(OMAP_DMA_CDSA_L(lch)) | + (omap_readw(OMAP_DMA_CDSA_U(lch)) << 16)); +} + +/* + * Returns current source transfer counting for the given DMA channel. + * Can be used to monitor the progress of a transfer inside a block. + * It must be called with disabled interrupts. + */ +int omap_get_dma_src_addr_counter(int lch) +{ + return (dma_addr_t) omap_readw(OMAP_DMA_CSAC(lch)); } int omap_dma_running(void) @@ -1076,6 +1086,7 @@ arch_initcall(omap_init_dma); EXPORT_SYMBOL(omap_get_dma_src_pos); EXPORT_SYMBOL(omap_get_dma_dst_pos); +EXPORT_SYMBOL(omap_get_dma_src_addr_counter); EXPORT_SYMBOL(omap_clear_dma); EXPORT_SYMBOL(omap_set_dma_priority); EXPORT_SYMBOL(omap_request_dma); diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c new file mode 100644 index 000000000000..a1468d7326eb --- /dev/null +++ b/arch/arm/plat-omap/dmtimer.c @@ -0,0 +1,260 @@ +/* + * linux/arch/arm/plat-omap/dmtimer.c + * + * OMAP Dual-Mode Timers + * + * Copyright (C) 2005 Nokia Corporation + * Author: Lauri Leukkunen + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include + +#define OMAP_TIMER_COUNT 8 + +#define OMAP_TIMER_ID_REG 0x00 +#define OMAP_TIMER_OCP_CFG_REG 0x10 +#define OMAP_TIMER_SYS_STAT_REG 0x14 +#define OMAP_TIMER_STAT_REG 0x18 +#define OMAP_TIMER_INT_EN_REG 0x1c +#define OMAP_TIMER_WAKEUP_EN_REG 0x20 +#define OMAP_TIMER_CTRL_REG 0x24 +#define OMAP_TIMER_COUNTER_REG 0x28 +#define OMAP_TIMER_LOAD_REG 0x2c +#define OMAP_TIMER_TRIGGER_REG 0x30 +#define OMAP_TIMER_WRITE_PEND_REG 0x34 +#define OMAP_TIMER_MATCH_REG 0x38 +#define OMAP_TIMER_CAPTURE_REG 0x3c +#define OMAP_TIMER_IF_CTRL_REG 0x40 + + +static struct dmtimer_info_struct { + struct list_head unused_timers; + struct list_head reserved_timers; +} dm_timer_info; + +static struct omap_dm_timer dm_timers[] = { + { .base=0xfffb1400, .irq=INT_1610_GPTIMER1 }, + { .base=0xfffb1c00, .irq=INT_1610_GPTIMER2 }, + { .base=0xfffb2400, .irq=INT_1610_GPTIMER3 }, + { .base=0xfffb2c00, .irq=INT_1610_GPTIMER4 }, + { .base=0xfffb3400, .irq=INT_1610_GPTIMER5 }, + { .base=0xfffb3c00, .irq=INT_1610_GPTIMER6 }, + { .base=0xfffb4400, .irq=INT_1610_GPTIMER7 }, + { .base=0xfffb4c00, .irq=INT_1610_GPTIMER8 }, + { .base=0x0 }, +}; + + +static spinlock_t dm_timer_lock; + + +inline void omap_dm_timer_write_reg(struct omap_dm_timer *timer, int reg, u32 value) +{ + omap_writel(value, timer->base + reg); + while (omap_dm_timer_read_reg(timer, OMAP_TIMER_WRITE_PEND_REG)) + ; +} + +u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, int reg) +{ + return omap_readl(timer->base + reg); +} + +int omap_dm_timers_active(void) +{ + struct omap_dm_timer *timer; + + for (timer = &dm_timers[0]; timer->base; ++timer) + if (omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG) & + OMAP_TIMER_CTRL_ST) + return 1; + + return 0; +} + + +void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) +{ + int n = (timer - dm_timers) << 1; + u32 l; + + l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n); + l |= source << n; + omap_writel(l, MOD_CONF_CTRL_1); +} + + +static void omap_dm_timer_reset(struct omap_dm_timer *timer) +{ + /* Reset and set posted mode */ + omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06); + omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_REG, 0x02); + + omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_ARMXOR); +} + + + +struct omap_dm_timer * omap_dm_timer_request(void) +{ + struct omap_dm_timer *timer = NULL; + unsigned long flags; + + spin_lock_irqsave(&dm_timer_lock, flags); + if (!list_empty(&dm_timer_info.unused_timers)) { + timer = (struct omap_dm_timer *) + dm_timer_info.unused_timers.next; + list_move_tail((struct list_head *)timer, + &dm_timer_info.reserved_timers); + } + spin_unlock_irqrestore(&dm_timer_lock, flags); + + return timer; +} + + +void omap_dm_timer_free(struct omap_dm_timer *timer) +{ + unsigned long flags; + + omap_dm_timer_reset(timer); + + spin_lock_irqsave(&dm_timer_lock, flags); + list_move_tail((struct list_head *)timer, &dm_timer_info.unused_timers); + spin_unlock_irqrestore(&dm_timer_lock, flags); +} + +void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, + unsigned int value) +{ + omap_dm_timer_write_reg(timer, OMAP_TIMER_INT_EN_REG, value); +} + +unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer) +{ + return omap_dm_timer_read_reg(timer, OMAP_TIMER_STAT_REG); +} + +void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value) +{ + omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG, value); +} + +void omap_dm_timer_enable_autoreload(struct omap_dm_timer *timer) +{ + u32 l; + l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); + l |= OMAP_TIMER_CTRL_AR; + omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); +} + +void omap_dm_timer_trigger(struct omap_dm_timer *timer) +{ + omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 1); +} + +void omap_dm_timer_set_trigger(struct omap_dm_timer *timer, unsigned int value) +{ + u32 l; + + l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); + l |= value & 0x3; + omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); +} + +void omap_dm_timer_start(struct omap_dm_timer *timer) +{ + u32 l; + + l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); + l |= OMAP_TIMER_CTRL_ST; + omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); +} + +void omap_dm_timer_stop(struct omap_dm_timer *timer) +{ + u32 l; + + l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); + l &= ~0x1; + omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); +} + +unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer) +{ + return omap_dm_timer_read_reg(timer, OMAP_TIMER_COUNTER_REG); +} + +void omap_dm_timer_reset_counter(struct omap_dm_timer *timer) +{ + omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, 0); +} + +void omap_dm_timer_set_load(struct omap_dm_timer *timer, unsigned int load) +{ + omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG, load); +} + +void omap_dm_timer_set_match(struct omap_dm_timer *timer, unsigned int match) +{ + omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG, match); +} + +void omap_dm_timer_enable_compare(struct omap_dm_timer *timer) +{ + u32 l; + + l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); + l |= OMAP_TIMER_CTRL_CE; + omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); +} + + +static inline void __dm_timer_init(void) +{ + struct omap_dm_timer *timer; + + spin_lock_init(&dm_timer_lock); + INIT_LIST_HEAD(&dm_timer_info.unused_timers); + INIT_LIST_HEAD(&dm_timer_info.reserved_timers); + + timer = &dm_timers[0]; + while (timer->base) { + list_add_tail((struct list_head *)timer, &dm_timer_info.unused_timers); + omap_dm_timer_reset(timer); + timer++; + } +} + +static int __init omap_dm_timer_init(void) +{ + if (cpu_is_omap16xx()) + __dm_timer_init(); + return 0; +} + +arch_initcall(omap_dm_timer_init); diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index aa481ea3d702..55059a24ad41 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -3,7 +3,7 @@ * * Support functions for OMAP GPIO * - * Copyright (C) 2003 Nokia Corporation + * Copyright (C) 2003-2005 Nokia Corporation * Written by Juha Yrjölä * * This program is free software; you can redistribute it and/or modify @@ -17,8 +17,11 @@ #include #include #include +#include +#include #include +#include #include #include #include @@ -29,7 +32,7 @@ /* * OMAP1510 GPIO registers */ -#define OMAP1510_GPIO_BASE 0xfffce000 +#define OMAP1510_GPIO_BASE (void __iomem *)0xfffce000 #define OMAP1510_GPIO_DATA_INPUT 0x00 #define OMAP1510_GPIO_DATA_OUTPUT 0x04 #define OMAP1510_GPIO_DIR_CONTROL 0x08 @@ -43,34 +46,37 @@ /* * OMAP1610 specific GPIO registers */ -#define OMAP1610_GPIO1_BASE 0xfffbe400 -#define OMAP1610_GPIO2_BASE 0xfffbec00 -#define OMAP1610_GPIO3_BASE 0xfffbb400 -#define OMAP1610_GPIO4_BASE 0xfffbbc00 +#define OMAP1610_GPIO1_BASE (void __iomem *)0xfffbe400 +#define OMAP1610_GPIO2_BASE (void __iomem *)0xfffbec00 +#define OMAP1610_GPIO3_BASE (void __iomem *)0xfffbb400 +#define OMAP1610_GPIO4_BASE (void __iomem *)0xfffbbc00 #define OMAP1610_GPIO_REVISION 0x0000 #define OMAP1610_GPIO_SYSCONFIG 0x0010 #define OMAP1610_GPIO_SYSSTATUS 0x0014 #define OMAP1610_GPIO_IRQSTATUS1 0x0018 #define OMAP1610_GPIO_IRQENABLE1 0x001c +#define OMAP1610_GPIO_WAKEUPENABLE 0x0028 #define OMAP1610_GPIO_DATAIN 0x002c #define OMAP1610_GPIO_DATAOUT 0x0030 #define OMAP1610_GPIO_DIRECTION 0x0034 #define OMAP1610_GPIO_EDGE_CTRL1 0x0038 #define OMAP1610_GPIO_EDGE_CTRL2 0x003c #define OMAP1610_GPIO_CLEAR_IRQENABLE1 0x009c +#define OMAP1610_GPIO_CLEAR_WAKEUPENA 0x00a8 #define OMAP1610_GPIO_CLEAR_DATAOUT 0x00b0 #define OMAP1610_GPIO_SET_IRQENABLE1 0x00dc +#define OMAP1610_GPIO_SET_WAKEUPENA 0x00e8 #define OMAP1610_GPIO_SET_DATAOUT 0x00f0 /* * OMAP730 specific GPIO registers */ -#define OMAP730_GPIO1_BASE 0xfffbc000 -#define OMAP730_GPIO2_BASE 0xfffbc800 -#define OMAP730_GPIO3_BASE 0xfffbd000 -#define OMAP730_GPIO4_BASE 0xfffbd800 -#define OMAP730_GPIO5_BASE 0xfffbe000 -#define OMAP730_GPIO6_BASE 0xfffbe800 +#define OMAP730_GPIO1_BASE (void __iomem *)0xfffbc000 +#define OMAP730_GPIO2_BASE (void __iomem *)0xfffbc800 +#define OMAP730_GPIO3_BASE (void __iomem *)0xfffbd000 +#define OMAP730_GPIO4_BASE (void __iomem *)0xfffbd800 +#define OMAP730_GPIO5_BASE (void __iomem *)0xfffbe000 +#define OMAP730_GPIO6_BASE (void __iomem *)0xfffbe800 #define OMAP730_GPIO_DATA_INPUT 0x00 #define OMAP730_GPIO_DATA_OUTPUT 0x04 #define OMAP730_GPIO_DIR_CONTROL 0x08 @@ -78,14 +84,43 @@ #define OMAP730_GPIO_INT_MASK 0x10 #define OMAP730_GPIO_INT_STATUS 0x14 +/* + * omap24xx specific GPIO registers + */ +#define OMAP24XX_GPIO1_BASE (void __iomem *)0x48018000 +#define OMAP24XX_GPIO2_BASE (void __iomem *)0x4801a000 +#define OMAP24XX_GPIO3_BASE (void __iomem *)0x4801c000 +#define OMAP24XX_GPIO4_BASE (void __iomem *)0x4801e000 +#define OMAP24XX_GPIO_REVISION 0x0000 +#define OMAP24XX_GPIO_SYSCONFIG 0x0010 +#define OMAP24XX_GPIO_SYSSTATUS 0x0014 +#define OMAP24XX_GPIO_IRQSTATUS1 0x0018 +#define OMAP24XX_GPIO_IRQENABLE1 0x001c +#define OMAP24XX_GPIO_CTRL 0x0030 +#define OMAP24XX_GPIO_OE 0x0034 +#define OMAP24XX_GPIO_DATAIN 0x0038 +#define OMAP24XX_GPIO_DATAOUT 0x003c +#define OMAP24XX_GPIO_LEVELDETECT0 0x0040 +#define OMAP24XX_GPIO_LEVELDETECT1 0x0044 +#define OMAP24XX_GPIO_RISINGDETECT 0x0048 +#define OMAP24XX_GPIO_FALLINGDETECT 0x004c +#define OMAP24XX_GPIO_CLEARIRQENABLE1 0x0060 +#define OMAP24XX_GPIO_SETIRQENABLE1 0x0064 +#define OMAP24XX_GPIO_CLEARWKUENA 0x0080 +#define OMAP24XX_GPIO_SETWKUENA 0x0084 +#define OMAP24XX_GPIO_CLEARDATAOUT 0x0090 +#define OMAP24XX_GPIO_SETDATAOUT 0x0094 + #define OMAP_MPUIO_MASK (~OMAP_MAX_GPIO_LINES & 0xff) struct gpio_bank { - u32 base; + void __iomem *base; u16 irq; u16 virtual_irq_start; - u8 method; + int method; u32 reserved_map; + u32 suspend_wakeup; + u32 saved_wakeup; spinlock_t lock; }; @@ -93,8 +128,9 @@ struct gpio_bank { #define METHOD_GPIO_1510 1 #define METHOD_GPIO_1610 2 #define METHOD_GPIO_730 3 +#define METHOD_GPIO_24XX 4 -#if defined(CONFIG_ARCH_OMAP16XX) +#ifdef CONFIG_ARCH_OMAP16XX static struct gpio_bank gpio_bank_1610[5] = { { OMAP_MPUIO_BASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO}, { OMAP1610_GPIO1_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1610 }, @@ -123,6 +159,15 @@ static struct gpio_bank gpio_bank_730[7] = { }; #endif +#ifdef CONFIG_ARCH_OMAP24XX +static struct gpio_bank gpio_bank_24xx[4] = { + { OMAP24XX_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX }, + { OMAP24XX_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX }, + { OMAP24XX_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX }, + { OMAP24XX_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX }, +}; +#endif + static struct gpio_bank *gpio_bank; static int gpio_bank_count; @@ -149,14 +194,23 @@ static inline struct gpio_bank *get_gpio_bank(int gpio) return &gpio_bank[1 + (gpio >> 5)]; } #endif +#ifdef CONFIG_ARCH_OMAP24XX + if (cpu_is_omap24xx()) + return &gpio_bank[gpio >> 5]; +#endif } static inline int get_gpio_index(int gpio) { +#ifdef CONFIG_ARCH_OMAP730 if (cpu_is_omap730()) return gpio & 0x1f; - else - return gpio & 0x0f; +#endif +#ifdef CONFIG_ARCH_OMAP24XX + if (cpu_is_omap24xx()) + return gpio & 0x1f; +#endif + return gpio & 0x0f; } static inline int gpio_valid(int gpio) @@ -179,6 +233,10 @@ static inline int gpio_valid(int gpio) #ifdef CONFIG_ARCH_OMAP730 if (cpu_is_omap730() && gpio < 192) return 0; +#endif +#ifdef CONFIG_ARCH_OMAP24XX + if (cpu_is_omap24xx() && gpio < 128) + return 0; #endif return -1; } @@ -195,7 +253,7 @@ static int check_gpio(int gpio) static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) { - u32 reg = bank->base; + void __iomem *reg = bank->base; u32 l; switch (bank->method) { @@ -211,6 +269,9 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) case METHOD_GPIO_730: reg += OMAP730_GPIO_DIR_CONTROL; break; + case METHOD_GPIO_24XX: + reg += OMAP24XX_GPIO_OE; + break; } l = __raw_readl(reg); if (is_input) @@ -234,7 +295,7 @@ void omap_set_gpio_direction(int gpio, int is_input) static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) { - u32 reg = bank->base; + void __iomem *reg = bank->base; u32 l = 0; switch (bank->method) { @@ -269,6 +330,13 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) else l &= ~(1 << gpio); break; + case METHOD_GPIO_24XX: + if (enable) + reg += OMAP24XX_GPIO_SETDATAOUT; + else + reg += OMAP24XX_GPIO_CLEARDATAOUT; + l = 1 << gpio; + break; default: BUG(); return; @@ -291,7 +359,7 @@ void omap_set_gpio_dataout(int gpio, int enable) int omap_get_gpio_datain(int gpio) { struct gpio_bank *bank; - u32 reg; + void __iomem *reg; if (check_gpio(gpio) < 0) return -1; @@ -310,109 +378,132 @@ int omap_get_gpio_datain(int gpio) case METHOD_GPIO_730: reg += OMAP730_GPIO_DATA_INPUT; break; + case METHOD_GPIO_24XX: + reg += OMAP24XX_GPIO_DATAIN; + break; default: BUG(); return -1; } - return (__raw_readl(reg) & (1 << get_gpio_index(gpio))) != 0; + return (__raw_readl(reg) + & (1 << get_gpio_index(gpio))) != 0; } -static void _set_gpio_edge_ctrl(struct gpio_bank *bank, int gpio, int edge) +#define MOD_REG_BIT(reg, bit_mask, set) \ +do { \ + int l = __raw_readl(base + reg); \ + if (set) l |= bit_mask; \ + else l &= ~bit_mask; \ + __raw_writel(l, base + reg); \ +} while(0) + +static inline void set_24xx_gpio_triggering(void __iomem *base, int gpio, int trigger) { - u32 reg = bank->base; - u32 l; + u32 gpio_bit = 1 << gpio; + + MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit, + trigger & IRQT_LOW); + MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit, + trigger & IRQT_HIGH); + MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit, + trigger & IRQT_RISING); + MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit, + trigger & IRQT_FALLING); + /* FIXME: Possibly do 'set_irq_handler(j, do_level_IRQ)' if only level + * triggering requested. */ +} + +static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) +{ + void __iomem *reg = bank->base; + u32 l = 0; switch (bank->method) { case METHOD_MPUIO: reg += OMAP_MPUIO_GPIO_INT_EDGE; l = __raw_readl(reg); - if (edge == OMAP_GPIO_RISING_EDGE) + if (trigger == IRQT_RISING) l |= 1 << gpio; - else + else if (trigger == IRQT_FALLING) l &= ~(1 << gpio); - __raw_writel(l, reg); + else + goto bad; break; case METHOD_GPIO_1510: reg += OMAP1510_GPIO_INT_CONTROL; l = __raw_readl(reg); - if (edge == OMAP_GPIO_RISING_EDGE) + if (trigger == IRQT_RISING) l |= 1 << gpio; - else + else if (trigger == IRQT_FALLING) l &= ~(1 << gpio); - __raw_writel(l, reg); + else + goto bad; break; case METHOD_GPIO_1610: - edge &= 0x03; if (gpio & 0x08) reg += OMAP1610_GPIO_EDGE_CTRL2; else reg += OMAP1610_GPIO_EDGE_CTRL1; gpio &= 0x07; + /* We allow only edge triggering, i.e. two lowest bits */ + if (trigger & ~IRQT_BOTHEDGE) + BUG(); + /* NOTE: knows __IRQT_{FAL,RIS}EDGE match OMAP hardware */ + trigger &= 0x03; l = __raw_readl(reg); l &= ~(3 << (gpio << 1)); - l |= edge << (gpio << 1); - __raw_writel(l, reg); + l |= trigger << (gpio << 1); break; case METHOD_GPIO_730: reg += OMAP730_GPIO_INT_CONTROL; l = __raw_readl(reg); - if (edge == OMAP_GPIO_RISING_EDGE) + if (trigger == IRQT_RISING) l |= 1 << gpio; - else + else if (trigger == IRQT_FALLING) l &= ~(1 << gpio); - __raw_writel(l, reg); + else + goto bad; + break; + case METHOD_GPIO_24XX: + set_24xx_gpio_triggering(reg, gpio, trigger); break; default: BUG(); - return; + goto bad; } + __raw_writel(l, reg); + return 0; +bad: + return -EINVAL; } -void omap_set_gpio_edge_ctrl(int gpio, int edge) +static int gpio_irq_type(unsigned irq, unsigned type) { struct gpio_bank *bank; + unsigned gpio; + int retval; + + if (irq > IH_MPUIO_BASE) + gpio = OMAP_MPUIO(irq - IH_MPUIO_BASE); + else + gpio = irq - IH_GPIO_BASE; if (check_gpio(gpio) < 0) - return; + return -EINVAL; + + if (type & (__IRQT_LOWLVL|__IRQT_HIGHLVL|IRQT_PROBE)) + return -EINVAL; + bank = get_gpio_bank(gpio); spin_lock(&bank->lock); - _set_gpio_edge_ctrl(bank, get_gpio_index(gpio), edge); + retval = _set_gpio_triggering(bank, get_gpio_index(gpio), type); spin_unlock(&bank->lock); -} - - -static int _get_gpio_edge_ctrl(struct gpio_bank *bank, int gpio) -{ - u32 reg = bank->base, l; - - switch (bank->method) { - case METHOD_MPUIO: - l = __raw_readl(reg + OMAP_MPUIO_GPIO_INT_EDGE); - return (l & (1 << gpio)) ? - OMAP_GPIO_RISING_EDGE : OMAP_GPIO_FALLING_EDGE; - case METHOD_GPIO_1510: - l = __raw_readl(reg + OMAP1510_GPIO_INT_CONTROL); - return (l & (1 << gpio)) ? - OMAP_GPIO_RISING_EDGE : OMAP_GPIO_FALLING_EDGE; - case METHOD_GPIO_1610: - if (gpio & 0x08) - reg += OMAP1610_GPIO_EDGE_CTRL2; - else - reg += OMAP1610_GPIO_EDGE_CTRL1; - return (__raw_readl(reg) >> ((gpio & 0x07) << 1)) & 0x03; - case METHOD_GPIO_730: - l = __raw_readl(reg + OMAP730_GPIO_INT_CONTROL); - return (l & (1 << gpio)) ? - OMAP_GPIO_RISING_EDGE : OMAP_GPIO_FALLING_EDGE; - default: - BUG(); - return -1; - } + return retval; } static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) { - u32 reg = bank->base; + void __iomem *reg = bank->base; switch (bank->method) { case METHOD_MPUIO: @@ -428,6 +519,9 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) case METHOD_GPIO_730: reg += OMAP730_GPIO_INT_STATUS; break; + case METHOD_GPIO_24XX: + reg += OMAP24XX_GPIO_IRQSTATUS1; + break; default: BUG(); return; @@ -442,7 +536,7 @@ static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio) static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enable) { - u32 reg = bank->base; + void __iomem *reg = bank->base; u32 l; switch (bank->method) { @@ -477,6 +571,13 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab else l |= gpio_mask; break; + case METHOD_GPIO_24XX: + if (enable) + reg += OMAP24XX_GPIO_SETIRQENABLE1; + else + reg += OMAP24XX_GPIO_CLEARIRQENABLE1; + l = gpio_mask; + break; default: BUG(); return; @@ -489,6 +590,50 @@ static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int ena _enable_gpio_irqbank(bank, 1 << get_gpio_index(gpio), enable); } +/* + * Note that ENAWAKEUP needs to be enabled in GPIO_SYSCONFIG register. + * 1510 does not seem to have a wake-up register. If JTAG is connected + * to the target, system will wake up always on GPIO events. While + * system is running all registered GPIO interrupts need to have wake-up + * enabled. When system is suspended, only selected GPIO interrupts need + * to have wake-up enabled. + */ +static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) +{ + switch (bank->method) { + case METHOD_GPIO_1610: + case METHOD_GPIO_24XX: + spin_lock(&bank->lock); + if (enable) + bank->suspend_wakeup |= (1 << gpio); + else + bank->suspend_wakeup &= ~(1 << gpio); + spin_unlock(&bank->lock); + return 0; + default: + printk(KERN_ERR "Can't enable GPIO wakeup for method %i\n", + bank->method); + return -EINVAL; + } +} + +/* Use disable_irq_wake() and enable_irq_wake() functions from drivers */ +static int gpio_wake_enable(unsigned int irq, unsigned int enable) +{ + unsigned int gpio = irq - IH_GPIO_BASE; + struct gpio_bank *bank; + int retval; + + if (check_gpio(gpio) < 0) + return -ENODEV; + bank = get_gpio_bank(gpio); + spin_lock(&bank->lock); + retval = _set_gpio_wakeup(bank, get_gpio_index(gpio), enable); + spin_unlock(&bank->lock); + + return retval; +} + int omap_request_gpio(int gpio) { struct gpio_bank *bank; @@ -505,14 +650,32 @@ int omap_request_gpio(int gpio) return -1; } bank->reserved_map |= (1 << get_gpio_index(gpio)); + + /* Set trigger to none. You need to enable the trigger after request_irq */ + _set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE); + #ifdef CONFIG_ARCH_OMAP1510 if (bank->method == METHOD_GPIO_1510) { - u32 reg; + void __iomem *reg; - /* Claim the pin for the ARM */ + /* Claim the pin for MPU */ reg = bank->base + OMAP1510_GPIO_PIN_CONTROL; __raw_writel(__raw_readl(reg) | (1 << get_gpio_index(gpio)), reg); } +#endif +#ifdef CONFIG_ARCH_OMAP16XX + if (bank->method == METHOD_GPIO_1610) { + /* Enable wake-up during idle for dynamic tick */ + void __iomem *reg = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; + __raw_writel(1 << get_gpio_index(gpio), reg); + } +#endif +#ifdef CONFIG_ARCH_OMAP24XX + if (bank->method == METHOD_GPIO_24XX) { + /* Enable wake-up during idle for dynamic tick */ + void __iomem *reg = bank->base + OMAP24XX_GPIO_SETWKUENA; + __raw_writel(1 << get_gpio_index(gpio), reg); + } #endif spin_unlock(&bank->lock); @@ -533,6 +696,20 @@ void omap_free_gpio(int gpio) spin_unlock(&bank->lock); return; } +#ifdef CONFIG_ARCH_OMAP16XX + if (bank->method == METHOD_GPIO_1610) { + /* Disable wake-up during idle for dynamic tick */ + void __iomem *reg = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; + __raw_writel(1 << get_gpio_index(gpio), reg); + } +#endif +#ifdef CONFIG_ARCH_OMAP24XX + if (bank->method == METHOD_GPIO_24XX) { + /* Disable wake-up during idle for dynamic tick */ + void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA; + __raw_writel(1 << get_gpio_index(gpio), reg); + } +#endif bank->reserved_map &= ~(1 << get_gpio_index(gpio)); _set_gpio_direction(bank, get_gpio_index(gpio), 1); _set_gpio_irqenable(bank, gpio, 0); @@ -552,7 +729,7 @@ void omap_free_gpio(int gpio) static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs) { - u32 isr_reg = 0; + void __iomem *isr_reg = NULL; u32 isr; unsigned int gpio_irq; struct gpio_bank *bank; @@ -574,24 +751,30 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc, if (bank->method == METHOD_GPIO_730) isr_reg = bank->base + OMAP730_GPIO_INT_STATUS; #endif +#ifdef CONFIG_ARCH_OMAP24XX + if (bank->method == METHOD_GPIO_24XX) + isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1; +#endif - isr = __raw_readl(isr_reg); - _enable_gpio_irqbank(bank, isr, 0); - _clear_gpio_irqbank(bank, isr); - _enable_gpio_irqbank(bank, isr, 1); - desc->chip->unmask(irq); - - if (unlikely(!isr)) - return; - - gpio_irq = bank->virtual_irq_start; - for (; isr != 0; isr >>= 1, gpio_irq++) { - struct irqdesc *d; - if (!(isr & 1)) - continue; - d = irq_desc + gpio_irq; - desc_handle_irq(gpio_irq, d, regs); - } + while(1) { + isr = __raw_readl(isr_reg); + _enable_gpio_irqbank(bank, isr, 0); + _clear_gpio_irqbank(bank, isr); + _enable_gpio_irqbank(bank, isr, 1); + desc->chip->unmask(irq); + + if (!isr) + break; + + gpio_irq = bank->virtual_irq_start; + for (; isr != 0; isr >>= 1, gpio_irq++) { + struct irqdesc *d; + if (!(isr & 1)) + continue; + d = irq_desc + gpio_irq; + desc_handle_irq(gpio_irq, d, regs); + } + } } static void gpio_ack_irq(unsigned int irq) @@ -613,14 +796,10 @@ static void gpio_mask_irq(unsigned int irq) static void gpio_unmask_irq(unsigned int irq) { unsigned int gpio = irq - IH_GPIO_BASE; + unsigned int gpio_idx = get_gpio_index(gpio); struct gpio_bank *bank = get_gpio_bank(gpio); - if (_get_gpio_edge_ctrl(bank, get_gpio_index(gpio)) == OMAP_GPIO_NO_EDGE) { - printk(KERN_ERR "OMAP GPIO %d: trying to enable GPIO IRQ while no edge is set\n", - gpio); - _set_gpio_edge_ctrl(bank, get_gpio_index(gpio), OMAP_GPIO_RISING_EDGE); - } - _set_gpio_irqenable(bank, gpio, 1); + _set_gpio_irqenable(bank, gpio_idx, 1); } static void mpuio_ack_irq(unsigned int irq) @@ -645,9 +824,11 @@ static void mpuio_unmask_irq(unsigned int irq) } static struct irqchip gpio_irq_chip = { - .ack = gpio_ack_irq, - .mask = gpio_mask_irq, - .unmask = gpio_unmask_irq, + .ack = gpio_ack_irq, + .mask = gpio_mask_irq, + .unmask = gpio_unmask_irq, + .set_type = gpio_irq_type, + .set_wake = gpio_wake_enable, }; static struct irqchip mpuio_irq_chip = { @@ -657,6 +838,7 @@ static struct irqchip mpuio_irq_chip = { }; static int initialized = 0; +static struct clk * gpio_ck = NULL; static int __init _omap_gpio_init(void) { @@ -665,6 +847,14 @@ static int __init _omap_gpio_init(void) initialized = 1; + if (cpu_is_omap1510()) { + gpio_ck = clk_get(NULL, "arm_gpio_ck"); + if (IS_ERR(gpio_ck)) + printk("Could not get arm_gpio_ck\n"); + else + clk_use(gpio_ck); + } + #ifdef CONFIG_ARCH_OMAP1510 if (cpu_is_omap1510()) { printk(KERN_INFO "OMAP1510 GPIO hardware\n"); @@ -674,7 +864,7 @@ static int __init _omap_gpio_init(void) #endif #if defined(CONFIG_ARCH_OMAP16XX) if (cpu_is_omap16xx()) { - int rev; + u32 rev; gpio_bank_count = 5; gpio_bank = gpio_bank_1610; @@ -689,6 +879,17 @@ static int __init _omap_gpio_init(void) gpio_bank_count = 7; gpio_bank = gpio_bank_730; } +#endif +#ifdef CONFIG_ARCH_OMAP24XX + if (cpu_is_omap24xx()) { + int rev; + + gpio_bank_count = 4; + gpio_bank = gpio_bank_24xx; + rev = omap_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); + printk(KERN_INFO "OMAP24xx GPIO hardware version %d.%d\n", + (rev >> 4) & 0x0f, rev & 0x0f); + } #endif for (i = 0; i < gpio_bank_count; i++) { int j, gpio_count = 16; @@ -710,6 +911,7 @@ static int __init _omap_gpio_init(void) if (bank->method == METHOD_GPIO_1610) { __raw_writew(0x0000, bank->base + OMAP1610_GPIO_IRQENABLE1); __raw_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1); + __raw_writew(0x0014, bank->base + OMAP1610_GPIO_SYSCONFIG); } #endif #ifdef CONFIG_ARCH_OMAP730 @@ -719,6 +921,14 @@ static int __init _omap_gpio_init(void) gpio_count = 32; /* 730 has 32-bit GPIOs */ } +#endif +#ifdef CONFIG_ARCH_OMAP24XX + if (bank->method == METHOD_GPIO_24XX) { + __raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_IRQENABLE1); + __raw_writel(0xffffffff, bank->base + OMAP24XX_GPIO_IRQSTATUS1); + + gpio_count = 32; + } #endif for (j = bank->virtual_irq_start; j < bank->virtual_irq_start + gpio_count; j++) { @@ -735,12 +945,97 @@ static int __init _omap_gpio_init(void) /* Enable system clock for GPIO module. * The CAM_CLK_CTRL *is* really the right place. */ - if (cpu_is_omap1610() || cpu_is_omap1710()) + if (cpu_is_omap16xx()) omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04, ULPD_CAM_CLK_CTRL); return 0; } +#if defined (CONFIG_ARCH_OMAP16XX) || defined (CONFIG_ARCH_OMAP24XX) +static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg) +{ + int i; + + if (!cpu_is_omap24xx() && !cpu_is_omap16xx()) + return 0; + + for (i = 0; i < gpio_bank_count; i++) { + struct gpio_bank *bank = &gpio_bank[i]; + void __iomem *wake_status; + void __iomem *wake_clear; + void __iomem *wake_set; + + switch (bank->method) { + case METHOD_GPIO_1610: + wake_status = bank->base + OMAP1610_GPIO_WAKEUPENABLE; + wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; + wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; + break; + case METHOD_GPIO_24XX: + wake_status = bank->base + OMAP24XX_GPIO_SETWKUENA; + wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA; + wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA; + break; + default: + continue; + } + + spin_lock(&bank->lock); + bank->saved_wakeup = __raw_readl(wake_status); + __raw_writel(0xffffffff, wake_clear); + __raw_writel(bank->suspend_wakeup, wake_set); + spin_unlock(&bank->lock); + } + + return 0; +} + +static int omap_gpio_resume(struct sys_device *dev) +{ + int i; + + if (!cpu_is_omap24xx() && !cpu_is_omap16xx()) + return 0; + + for (i = 0; i < gpio_bank_count; i++) { + struct gpio_bank *bank = &gpio_bank[i]; + void __iomem *wake_clear; + void __iomem *wake_set; + + switch (bank->method) { + case METHOD_GPIO_1610: + wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; + wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; + break; + case METHOD_GPIO_24XX: + wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; + wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; + break; + default: + continue; + } + + spin_lock(&bank->lock); + __raw_writel(0xffffffff, wake_clear); + __raw_writel(bank->saved_wakeup, wake_set); + spin_unlock(&bank->lock); + } + + return 0; +} + +static struct sysdev_class omap_gpio_sysclass = { + set_kset_name("gpio"), + .suspend = omap_gpio_suspend, + .resume = omap_gpio_resume, +}; + +static struct sys_device omap_gpio_device = { + .id = 0, + .cls = &omap_gpio_sysclass, +}; +#endif + /* * This may get called early from board specific init */ @@ -752,11 +1047,30 @@ int omap_gpio_init(void) return 0; } +static int __init omap_gpio_sysinit(void) +{ + int ret = 0; + + if (!initialized) + ret = _omap_gpio_init(); + +#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) + if (cpu_is_omap16xx() || cpu_is_omap24xx()) { + if (ret == 0) { + ret = sysdev_class_register(&omap_gpio_sysclass); + if (ret == 0) + ret = sysdev_register(&omap_gpio_device); + } + } +#endif + + return ret; +} + EXPORT_SYMBOL(omap_request_gpio); EXPORT_SYMBOL(omap_free_gpio); EXPORT_SYMBOL(omap_set_gpio_direction); EXPORT_SYMBOL(omap_set_gpio_dataout); EXPORT_SYMBOL(omap_get_gpio_datain); -EXPORT_SYMBOL(omap_set_gpio_edge_ctrl); -arch_initcall(omap_gpio_init); +arch_initcall(omap_gpio_sysinit); diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 43567d5edddb..9c9b7df3faf6 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include @@ -187,9 +188,6 @@ static int omap_mcbsp_check(unsigned int id) return -1; } -#define EN_XORPCK 1 -#define DSP_RSTCT2 0xe1008014 - static void omap_mcbsp_dsp_request(void) { if (cpu_is_omap1510() || cpu_is_omap16xx()) { @@ -198,6 +196,11 @@ static void omap_mcbsp_dsp_request(void) /* enable 12MHz clock to mcbsp 1 & 3 */ clk_use(mcbsp_dspxor_ck); + + /* + * DSP external peripheral reset + * FIXME: This should be moved to dsp code + */ __raw_writew(__raw_readw(DSP_RSTCT2) | 1 | 1 << 1, DSP_RSTCT2); } diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c index ea7b955b9c81..64482040f89e 100644 --- a/arch/arm/plat-omap/mux.c +++ b/arch/arm/plat-omap/mux.c @@ -48,6 +48,9 @@ omap_cfg_reg(const reg_cfg_t reg_cfg) pull_orig = 0, pull = 0; unsigned int mask, warn = 0; + if (cpu_is_omap7xx()) + return 0; + if (reg_cfg > ARRAY_SIZE(reg_cfg_table)) { printk(KERN_ERR "MUX: reg_cfg %d\n", reg_cfg); return -EINVAL; diff --git a/arch/arm/plat-omap/ocpi.c b/arch/arm/plat-omap/ocpi.c index 2ede2ee8cae4..1fb16f9edfd5 100644 --- a/arch/arm/plat-omap/ocpi.c +++ b/arch/arm/plat-omap/ocpi.c @@ -25,6 +25,7 @@ #include #include +#include #include #include #include diff --git a/arch/arm/plat-omap/pm.c b/arch/arm/plat-omap/pm.c index e6536b16c385..e15c6c1ddec9 100644 --- a/arch/arm/plat-omap/pm.c +++ b/arch/arm/plat-omap/pm.c @@ -39,24 +39,32 @@ #include #include #include +#include #include +#include #include -#include +#include -#include +#include +#include +#include #include #include -#include #include +#include #include "clock.h" +#include "sram.h" static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE]; static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE]; static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE]; static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE]; +static void (*omap_sram_idle)(void) = NULL; +static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL; + /* * Let's power down on idle, but only if we are really * idle, because once we start down the path of @@ -65,7 +73,6 @@ static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE]; */ void omap_pm_idle(void) { - int (*func_ptr)(void) = 0; unsigned int mask32 = 0; /* @@ -83,6 +90,13 @@ void omap_pm_idle(void) } mask32 = omap_readl(ARM_SYSST); + /* + * Prevent the ULPD from entering low power state by setting + * POWER_CTRL_REG:4 = 0 + */ + omap_writew(omap_readw(ULPD_POWER_CTRL) & + ~ULPD_DEEP_SLEEP_TRANSITION_EN, ULPD_POWER_CTRL); + /* * Since an interrupt may set up a timer, we don't want to * reprogram the hardware timer with interrupts enabled. @@ -92,18 +106,9 @@ void omap_pm_idle(void) if ((mask32 & DSP_IDLE) == 0) { __asm__ volatile ("mcr p15, 0, r0, c7, c0, 4"); - } else { - - if (cpu_is_omap1510()) { - func_ptr = (void *)(OMAP1510_SRAM_IDLE_SUSPEND); - } else if (cpu_is_omap1610() || cpu_is_omap1710()) { - func_ptr = (void *)(OMAP1610_SRAM_IDLE_SUSPEND); - } else if (cpu_is_omap5912()) { - func_ptr = (void *)(OMAP5912_SRAM_IDLE_SUSPEND); - } + } else + omap_sram_idle(); - func_ptr(); - } local_fiq_enable(); local_irq_enable(); } @@ -115,58 +120,55 @@ void omap_pm_idle(void) */ static void omap_pm_wakeup_setup(void) { - /* - * Enable ARM XOR clock and release peripheral from reset by - * writing 1 to PER_EN bit in ARM_RSTCT2, this is required - * for UART configuration to use UART2 to wake up. - */ - - omap_writel(omap_readl(ARM_IDLECT2) | ENABLE_XORCLK, ARM_IDLECT2); - omap_writel(omap_readl(ARM_RSTCT2) | PER_EN, ARM_RSTCT2); - omap_writew(MODEM_32K_EN, ULPD_CLOCK_CTRL); + u32 level1_wake = OMAP_IRQ_BIT(INT_IH2_IRQ); + u32 level2_wake = OMAP_IRQ_BIT(INT_UART2) | OMAP_IRQ_BIT(INT_KEYBOARD); /* - * Turn off all interrupts except L1-2nd level cascade, - * and the L2 wakeup interrupts: keypad and UART2. + * Turn off all interrupts except GPIO bank 1, L1-2nd level cascade, + * and the L2 wakeup interrupts: keypad and UART2. Note that the + * drivers must still separately call omap_set_gpio_wakeup() to + * wake up to a GPIO interrupt. */ + if (cpu_is_omap1510() || cpu_is_omap16xx()) + level1_wake |= OMAP_IRQ_BIT(INT_GPIO_BANK1); + else if (cpu_is_omap730()) + level1_wake |= OMAP_IRQ_BIT(INT_730_GPIO_BANK1); - omap_writel(~IRQ_LEVEL2, OMAP_IH1_MIR); + omap_writel(~level1_wake, OMAP_IH1_MIR); - if (cpu_is_omap1510()) { - omap_writel(~(IRQ_UART2 | IRQ_KEYBOARD), OMAP_IH2_MIR); - } + if (cpu_is_omap1510()) + omap_writel(~level2_wake, OMAP_IH2_MIR); + /* INT_1610_WAKE_UP_REQ is needed for GPIO wakeup... */ if (cpu_is_omap16xx()) { - omap_writel(~(IRQ_UART2 | IRQ_KEYBOARD), OMAP_IH2_0_MIR); - - omap_writel(~0x0, OMAP_IH2_1_MIR); + omap_writel(~level2_wake, OMAP_IH2_0_MIR); + omap_writel(~OMAP_IRQ_BIT(INT_1610_WAKE_UP_REQ), OMAP_IH2_1_MIR); omap_writel(~0x0, OMAP_IH2_2_MIR); omap_writel(~0x0, OMAP_IH2_3_MIR); } - /* New IRQ agreement */ + /* New IRQ agreement, recalculate in cascade order */ + omap_writel(1, OMAP_IH2_CONTROL); omap_writel(1, OMAP_IH1_CONTROL); - - /* external PULL to down, bit 22 = 0 */ - omap_writel(omap_readl(PULL_DWN_CTRL_2) & ~(1<<22), PULL_DWN_CTRL_2); } void omap_pm_suspend(void) { - unsigned int mask32 = 0; unsigned long arg0 = 0, arg1 = 0; - int (*func_ptr)(unsigned short, unsigned short) = 0; - unsigned short save_dsp_idlect2; - printk("PM: OMAP%x is entering deep sleep now ...\n", system_rev); + printk("PM: OMAP%x is trying to enter deep sleep...\n", system_rev); + + omap_serial_wake_trigger(1); if (machine_is_omap_osk()) { /* Stop LED1 (D9) blink */ tps65010_set_led(LED1, OFF); } + omap_writew(0xffff, ULPD_SOFT_DISABLE_REQ_REG); + /* - * Step 1: turn off interrupts + * Step 1: turn off interrupts (FIXME: NOTE: already disabled) */ local_irq_disable(); @@ -207,6 +209,8 @@ void omap_pm_suspend(void) ARM_SAVE(ARM_CKCTL); ARM_SAVE(ARM_IDLECT1); ARM_SAVE(ARM_IDLECT2); + if (!(cpu_is_omap1510())) + ARM_SAVE(ARM_IDLECT3); ARM_SAVE(ARM_EWUPCT); ARM_SAVE(ARM_RSTCT1); ARM_SAVE(ARM_RSTCT2); @@ -214,42 +218,12 @@ void omap_pm_suspend(void) ULPD_SAVE(ULPD_CLOCK_CTRL); ULPD_SAVE(ULPD_STATUS_REQ); - /* - * Step 3: LOW_PWR signal enabling - * - * Allow the LOW_PWR signal to be visible on MPUIO5 ball. - */ - if (cpu_is_omap1510()) { - /* POWER_CTRL_REG = 0x1 (LOW_POWER is available) */ - omap_writew(omap_readw(ULPD_POWER_CTRL) | - OMAP1510_ULPD_LOW_POWER_REQ, ULPD_POWER_CTRL); - } else if (cpu_is_omap16xx()) { - /* POWER_CTRL_REG = 0x1 (LOW_POWER is available) */ - omap_writew(omap_readw(ULPD_POWER_CTRL) | - OMAP1610_ULPD_LOW_POWER_REQ, ULPD_POWER_CTRL); - } - - /* configure LOW_PWR pin */ - omap_cfg_reg(T20_1610_LOW_PWR); + /* (Step 3 removed - we now allow deep sleep by default) */ /* * Step 4: OMAP DSP Shutdown */ - /* Set DSP_RST = 1 and DSP_EN = 0, put DSP block into reset */ - omap_writel((omap_readl(ARM_RSTCT1) | DSP_RST) & ~DSP_ENABLE, - ARM_RSTCT1); - - /* Set DSP boot mode to DSP-IDLE, DSP_BOOT_MODE = 0x2 */ - omap_writel(DSP_IDLE_MODE, MPUI_DSP_BOOT_CONFIG); - - /* Set EN_DSPCK = 0, stop DSP block clock */ - omap_writel(omap_readl(ARM_CKCTL) & ~DSP_CLOCK_ENABLE, ARM_CKCTL); - - /* Stop any DSP domain clocks */ - omap_writel(omap_readl(ARM_IDLECT2) | (1< 0 (WDT clock) */ - mask32 |= (1< 1 (XORPCK clock) */ - mask32 &= ~(1< 0 (MPUPER_CK clock) */ - mask32 &= ~(1< 0 (LCDC clock) */ - mask32 &= ~(1< 0 (local bus clock) */ - mask32 |= (1< 1 (MPUI clock) */ - mask32 &= ~(1< 0 (MPU timer clock) */ - mask32 &= ~(1< 0 (DMAC clock) */ - mask32 &= ~(1< 0 (GPIO clock) */ - omap_writel(mask32, ARM_IDLECT2); - /* disable ARM watchdog */ omap_writel(0x00F5, OMAP_WDT_TIMER_MODE); omap_writel(0x00A0, OMAP_WDT_TIMER_MODE); @@ -295,47 +254,24 @@ void omap_pm_suspend(void) arg0 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT1]; arg1 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT2]; - if (cpu_is_omap1510()) { - func_ptr = (void *)(OMAP1510_SRAM_API_SUSPEND); - } else if (cpu_is_omap1610() || cpu_is_omap1710()) { - func_ptr = (void *)(OMAP1610_SRAM_API_SUSPEND); - } else if (cpu_is_omap5912()) { - func_ptr = (void *)(OMAP5912_SRAM_API_SUSPEND); - } - /* * Step 6c: ARM and Traffic controller shutdown * * Jump to assembly code. The processor will stay there * until wake up. */ - - func_ptr(arg0, arg1); + omap_sram_suspend(arg0, arg1); /* * If we are here, processor is woken up! */ - if (cpu_is_omap1510()) { - /* POWER_CTRL_REG = 0x0 (LOW_POWER is disabled) */ - omap_writew(omap_readw(ULPD_POWER_CTRL) & - ~OMAP1510_ULPD_LOW_POWER_REQ, ULPD_POWER_CTRL); - } else if (cpu_is_omap16xx()) { - /* POWER_CTRL_REG = 0x0 (LOW_POWER is disabled) */ - omap_writew(omap_readw(ULPD_POWER_CTRL) & - ~OMAP1610_ULPD_LOW_POWER_REQ, ULPD_POWER_CTRL); - } - - - /* Restore DSP clocks */ - omap_writel(omap_readl(ARM_IDLECT2) | (1< +#include +#include +#include +#include + + .text + +/* + * Reprograms ULPD and CKCTL. + */ +ENTRY(sram_reprogram_clock) + stmfd sp!, {r0 - r12, lr} @ save registers on stack + + mov r2, #IO_ADDRESS(DPLL_CTL) & 0xff000000 + orr r2, r2, #IO_ADDRESS(DPLL_CTL) & 0x00ff0000 + orr r2, r2, #IO_ADDRESS(DPLL_CTL) & 0x0000ff00 + + mov r3, #IO_ADDRESS(ARM_CKCTL) & 0xff000000 + orr r3, r3, #IO_ADDRESS(ARM_CKCTL) & 0x00ff0000 + orr r3, r3, #IO_ADDRESS(ARM_CKCTL) & 0x0000ff00 + + tst r0, #1 << 4 @ want lock mode? + beq newck @ nope + bic r0, r0, #1 << 4 @ else clear lock bit + strh r0, [r2] @ set dpll into bypass mode + orr r0, r0, #1 << 4 @ set lock bit again + +newck: + strh r1, [r3] @ write new ckctl value + strh r0, [r2] @ write new dpll value + + mov r4, #0x0700 @ let the clocks settle + orr r4, r4, #0x00ff +delay: sub r4, r4, #1 + cmp r4, #0 + bne delay + +lock: ldrh r4, [r2], #0 @ read back dpll value + tst r0, #1 << 4 @ want lock mode? + beq out @ nope + tst r4, #1 << 0 @ dpll rate locked? + beq lock @ try again + +out: + ldmfd sp!, {r0 - r12, pc} @ restore regs and return +ENTRY(sram_reprogram_clock_sz) + .word . - sram_reprogram_clock diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c new file mode 100644 index 000000000000..7719a4062e3a --- /dev/null +++ b/arch/arm/plat-omap/sram.c @@ -0,0 +1,116 @@ +/* + * linux/arch/arm/plat-omap/sram.c + * + * OMAP SRAM detection and management + * + * Copyright (C) 2005 Nokia Corporation + * Written by Tony Lindgren + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include + +#include +#include +#include + +#include "sram.h" + +#define OMAP1_SRAM_BASE 0xd0000000 +#define OMAP1_SRAM_START 0x20000000 +#define SRAM_BOOTLOADER_SZ 0x80 + +static unsigned long omap_sram_base; +static unsigned long omap_sram_size; +static unsigned long omap_sram_ceil; + +/* + * The amount of SRAM depends on the core type: + * 730 = 200K, 1510 = 512K, 5912 = 256K, 1610 = 16K, 1710 = 16K + * Note that we cannot try to test for SRAM here because writes + * to secure SRAM will hang the system. Also the SRAM is not + * yet mapped at this point. + */ +void __init omap_detect_sram(void) +{ + omap_sram_base = OMAP1_SRAM_BASE; + + if (cpu_is_omap730()) + omap_sram_size = 0x32000; + else if (cpu_is_omap1510()) + omap_sram_size = 0x80000; + else if (cpu_is_omap1610() || cpu_is_omap1621() || cpu_is_omap1710()) + omap_sram_size = 0x4000; + else if (cpu_is_omap1611()) + omap_sram_size = 0x3e800; + else { + printk(KERN_ERR "Could not detect SRAM size\n"); + omap_sram_size = 0x4000; + } + + printk(KERN_INFO "SRAM size: 0x%lx\n", omap_sram_size); + omap_sram_ceil = omap_sram_base + omap_sram_size; +} + +static struct map_desc omap_sram_io_desc[] __initdata = { + { OMAP1_SRAM_BASE, OMAP1_SRAM_START, 0, MT_DEVICE } +}; + +/* + * In order to use last 2kB of SRAM on 1611b, we must round the size + * up to multiple of PAGE_SIZE. We cannot use ioremap for SRAM, as + * clock init needs SRAM early. + */ +void __init omap_map_sram(void) +{ + if (omap_sram_size == 0) + return; + + omap_sram_io_desc[0].length = (omap_sram_size + PAGE_SIZE-1)/PAGE_SIZE; + omap_sram_io_desc[0].length *= PAGE_SIZE; + iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc)); + + /* + * Looks like we need to preserve some bootloader code at the + * beginning of SRAM for jumping to flash for reboot to work... + */ + memset((void *)omap_sram_base + SRAM_BOOTLOADER_SZ, 0, + omap_sram_size - SRAM_BOOTLOADER_SZ); +} + +static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl) = NULL; + +void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl) +{ + if (_omap_sram_reprogram_clock == NULL) + panic("Cannot use SRAM"); + + return _omap_sram_reprogram_clock(dpllctl, ckctl); +} + +void * omap_sram_push(void * start, unsigned long size) +{ + if (size > (omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ))) { + printk(KERN_ERR "Not enough space in SRAM\n"); + return NULL; + } + omap_sram_ceil -= size; + omap_sram_ceil &= ~0x3; + memcpy((void *)omap_sram_ceil, start, size); + + return (void *)omap_sram_ceil; +} + +void __init omap_sram_init(void) +{ + omap_detect_sram(); + omap_map_sram(); + _omap_sram_reprogram_clock = omap_sram_push(sram_reprogram_clock, + sram_reprogram_clock_sz); +} diff --git a/arch/arm/plat-omap/sram.h b/arch/arm/plat-omap/sram.h new file mode 100644 index 000000000000..71984efa6ae8 --- /dev/null +++ b/arch/arm/plat-omap/sram.h @@ -0,0 +1,21 @@ +/* + * linux/arch/arm/plat-omap/sram.h + * + * Interface for functions that need to be run in internal SRAM + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_OMAP_SRAM_H +#define __ARCH_ARM_OMAP_SRAM_H + +extern void * omap_sram_push(void * start, unsigned long size); +extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl); + +/* Do not use these */ +extern void sram_reprogram_clock(u32 ckctl, u32 dpllctl); +extern unsigned long sram_reprogram_clock_sz; + +#endif diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c index 25bc4a8dd763..98f1c76f8660 100644 --- a/arch/arm/plat-omap/usb.c +++ b/arch/arm/plat-omap/usb.c @@ -41,6 +41,7 @@ /* These routines should handle the standard chip-specific modes * for usb0/1/2 ports, covering basic mux and transceiver setup. + * Call omap_usb_init() once, from INIT_MACHINE(). * * Some board-*.c files will need to set up additional mux options, * like for suspend handling, vbus sensing, GPIOs, and the D+ pullup. -- cgit v1.2.2 From 7dfe508a821adf180beafa29761b4a303536d67b Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 7 Sep 2005 17:20:28 +0100 Subject: [ARM] 2880/1: OMAP 4/4: Update H2 defconfig Patch from Tony Lindgren This patch updates H2 defconfig Signed-off-by: Tony Lindgren Signed-off-by: Russell King --- arch/arm/configs/omap_h2_1610_defconfig | 290 ++++++++------------------------ 1 file changed, 72 insertions(+), 218 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig index 24955263b096..4198677cd394 100644 --- a/arch/arm/configs/omap_h2_1610_defconfig +++ b/arch/arm/configs/omap_h2_1610_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc2 -# Fri Jul 8 04:49:34 2005 +# Linux kernel version: 2.6.13 +# Mon Sep 5 18:07:12 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -102,9 +102,11 @@ CONFIG_OMAP_MUX_WARNINGS=y # CONFIG_OMAP_MPU_TIMER is not set CONFIG_OMAP_32K_TIMER=y CONFIG_OMAP_32K_TIMER_HZ=128 +# CONFIG_OMAP_DM_TIMER is not set CONFIG_OMAP_LL_DEBUG_UART1=y # CONFIG_OMAP_LL_DEBUG_UART2 is not set # CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_SERIAL_WAKE=y # # OMAP Core Type @@ -166,7 +168,6 @@ CONFIG_ISA_DMA_API=y # # Kernel Features # -# CONFIG_SMP is not set CONFIG_PREEMPT=y CONFIG_NO_IDLE_HZ=y # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set @@ -230,91 +231,82 @@ CONFIG_PM=y # CONFIG_APM is not set # -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Memory Technology Devices (MTD) +# Networking # -CONFIG_MTD=y -CONFIG_MTD_DEBUG=y -CONFIG_MTD_DEBUG_VERBOSE=3 -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set +CONFIG_NET=y # -# User Modules And Translation Layers +# Networking options # -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set # -# RAM/ROM/Flash chip drivers +# SCTP Configuration (EXPERIMENTAL) # -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set # -# Mapping drivers for chip access +# Network testing # -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_EDB7312 is not set +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set # -# Self-contained MTD device drivers +# Device Drivers # -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set # -# Disk-On-Chip Device Drivers +# Generic Driver Options # -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set # -# NAND Flash Device Drivers +# Memory Technology Devices (MTD) # -# CONFIG_MTD_NAND is not set +# CONFIG_MTD is not set # # Parallel port support @@ -403,72 +395,8 @@ CONFIG_SCSI_PROC_FS=y # # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) +# Network device support # -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set @@ -518,6 +446,8 @@ CONFIG_SLIP_COMPRESSED=y # CONFIG_SLIP_MODE_SLIP6 is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -615,77 +545,15 @@ CONFIG_WATCHDOG_NOWAYOUT=y # # I2C support # -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ISA is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_PCA_ISA is not set +# CONFIG_I2C is not set +# CONFIG_I2C_SENSOR is not set +CONFIG_ISP1301_OMAP=y # -# Hardware Sensors Chip support +# Hardware Monitoring support # -# CONFIG_I2C_SENSOR is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set - -# -# Other I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -CONFIG_ISP1301_OMAP=y -CONFIG_TPS65010=y -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_HWMON=y +# CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices @@ -756,15 +624,9 @@ CONFIG_SOUND=y # Open Sound System # CONFIG_SOUND_PRIME=y -# CONFIG_SOUND_BT878 is not set -# CONFIG_SOUND_FUSION is not set -# CONFIG_SOUND_CS4281 is not set -# CONFIG_SOUND_SONICVIBES is not set -# CONFIG_SOUND_TRIDENT is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set # CONFIG_SOUND_OSS is not set -# CONFIG_SOUND_TVMIXER is not set # CONFIG_SOUND_AD1980 is not set # @@ -810,6 +672,7 @@ CONFIG_EXT2_FS=y # CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set # # XFS support @@ -817,6 +680,7 @@ CONFIG_EXT2_FS=y # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=y +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -857,15 +721,6 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=2 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set @@ -1007,4 +862,3 @@ CONFIG_CRYPTO_DES=y CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -- cgit v1.2.2 From fd6480f27e38f86ddea78eb5b46db249dfd09f17 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Wed, 7 Sep 2005 17:24:35 +0100 Subject: [ARM] 2883/1: PXA Sharpsl: Add detection of new PXA based Zaurii machine types Patch from Richard Purdie Add machine detection routines for several new models of PXA based Zaurii (SL-C3000 - Spitz, SL-C1000 - Akita, SL-C3100 - Borzoi, SL-C6000 - Tosa). Sharp continue to use broken bootloaders in ROM. Signed-off-by: Richard Purdie Signed-off-by: Russell King --- arch/arm/boot/compressed/head-sharpsl.S | 111 ++++++++++++++++++++++++-------- 1 file changed, 85 insertions(+), 26 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/compressed/head-sharpsl.S b/arch/arm/boot/compressed/head-sharpsl.S index d6bf8a2b090d..59ad69640d6b 100644 --- a/arch/arm/boot/compressed/head-sharpsl.S +++ b/arch/arm/boot/compressed/head-sharpsl.S @@ -7,7 +7,8 @@ * so we have to figure out the machine for ourselves... * * Support for Poodle, Corgi (SL-C700), Shepherd (SL-C750) - * and Husky (SL-C760). + * Husky (SL-C760), Tosa (SL-C6000), Spitz (SL-C3000), + * Akita (SL-C1000) and Borzoi (SL-C3100). * */ @@ -23,6 +24,22 @@ __SharpSL_start: +/* Check for TC6393 - if found we have a Tosa */ + ldr r7, .TOSAID + mov r1, #0x10000000 @ Base address of TC6393 chip + mov r6, #0x03 + ldrh r3, [r1, #8] @ Load TC6393XB Revison: This is 0x0003 + cmp r6, r3 + beq .SHARPEND @ Success -> tosa + +/* Check for pxa270 - if found, branch */ + mrc p15, 0, r4, c0, c0 @ Get Processor ID + and r4, r4, #0xffffff00 + ldr r3, .PXA270ID + cmp r4, r3 + beq .PXA270 + +/* Check for w100 - if not found we have a Poodle */ ldr r1, .W100ADDR @ Base address of w100 chip + regs offset mov r6, #0x31 @ Load Magic Init value @@ -30,7 +47,7 @@ __SharpSL_start: mov r5, #0x3000 .W100LOOP: subs r5, r5, #1 - bne .W100LOOP + bne .W100LOOP mov r6, #0x30 @ Load 2nd Magic Init value str r6, [r1, #0x280] @ to SCRATCH_UMSK @@ -40,45 +57,52 @@ __SharpSL_start: cmp r6, r3 bne .SHARPEND @ We have no w100 - Poodle - mrc p15, 0, r6, c0, c0 @ Get Processor ID - and r6, r6, #0xffffff00 +/* Check for pxa250 - if found we have a Corgi */ ldr r7, .CORGIID ldr r3, .PXA255ID - cmp r6, r3 + cmp r4, r3 blo .SHARPEND @ We have a PXA250 - Corgi - mov r1, #0x0c000000 @ Base address of NAND chip - ldrb r3, [r1, #24] @ Load FLASHCTL - bic r3, r3, #0x11 @ SET NCE - orr r3, r3, #0x0a @ SET CLR + FLWP - strb r3, [r1, #24] @ Save to FLASHCTL - mov r2, #0x90 @ Command "readid" - strb r2, [r1, #20] @ Save to FLASHIO - bic r3, r3, #2 @ CLR CLE - orr r3, r3, #4 @ SET ALE - strb r3, [r1, #24] @ Save to FLASHCTL - mov r2, #0 @ Address 0x00 - strb r2, [r1, #20] @ Save to FLASHIO - bic r3, r3, #4 @ CLR ALE - strb r3, [r1, #24] @ Save to FLASHCTL -.SHARP1: - ldrb r3, [r1, #24] @ Load FLASHCTL - tst r3, #32 @ Is chip ready? - beq .SHARP1 - ldrb r2, [r1, #20] @ NAND Manufacturer ID - ldrb r3, [r1, #20] @ NAND Chip ID +/* Check for 64MiB flash - if found we have a Shepherd */ + bl get_flash_ids ldr r7, .SHEPHERDID cmp r3, #0x76 @ 64MiB flash beq .SHARPEND @ We have Shepherd + +/* Must be a Husky */ ldr r7, .HUSKYID @ Must be Husky b .SHARPEND +.PXA270: +/* Check for 16MiB flash - if found we have Spitz */ + bl get_flash_ids + ldr r7, .SPITZID + cmp r3, #0x73 @ 16MiB flash + beq .SHARPEND @ We have Spitz + +/* Check for a second SCOOP chip - if found we have Borzoi */ + ldr r1, .SCOOP2ADDR + ldr r7, .BORZOIID + mov r6, #0x0140 + strh r6, [r1] + ldrh r6, [r1] + cmp r6, #0x0140 + beq .SHARPEND @ We have Borzoi + +/* Must be Akita */ + ldr r7, .AKITAID + b .SHARPEND @ We have Borzoi + .PXA255ID: .word 0x69052d00 @ PXA255 Processor ID +.PXA270ID: + .word 0x69054100 @ PXA270 Processor ID .W100ID: .word 0x57411002 @ w100 Chip ID .W100ADDR: .word 0x08010000 @ w100 Chip ID Reg Address +.SCOOP2ADDR: + .word 0x08800040 .POODLEID: .word MACH_TYPE_POODLE .CORGIID: @@ -87,6 +111,41 @@ __SharpSL_start: .word MACH_TYPE_SHEPHERD .HUSKYID: .word MACH_TYPE_HUSKY -.SHARPEND: +.TOSAID: + .word MACH_TYPE_TOSA +.SPITZID: + .word MACH_TYPE_SPITZ +.AKITAID: + .word MACH_TYPE_AKITA +.BORZOIID: + .word MACH_TYPE_BORZOI +/* + * Return: r2 - NAND Manufacturer ID + * r3 - NAND Chip ID + * Corrupts: r1 + */ +get_flash_ids: + mov r1, #0x0c000000 @ Base address of NAND chip + ldrb r3, [r1, #24] @ Load FLASHCTL + bic r3, r3, #0x11 @ SET NCE + orr r3, r3, #0x0a @ SET CLR + FLWP + strb r3, [r1, #24] @ Save to FLASHCTL + mov r2, #0x90 @ Command "readid" + strb r2, [r1, #20] @ Save to FLASHIO + bic r3, r3, #2 @ CLR CLE + orr r3, r3, #4 @ SET ALE + strb r3, [r1, #24] @ Save to FLASHCTL + mov r2, #0 @ Address 0x00 + strb r2, [r1, #20] @ Save to FLASHIO + bic r3, r3, #4 @ CLR ALE + strb r3, [r1, #24] @ Save to FLASHCTL +.fids1: + ldrb r3, [r1, #24] @ Load FLASHCTL + tst r3, #32 @ Is chip ready? + beq .fids1 + ldrb r2, [r1, #20] @ NAND Manufacturer ID + ldrb r3, [r1, #20] @ NAND Chip ID + mov pc, lr +.SHARPEND: -- cgit v1.2.2 From 7691d931aa55409ae3339d541ec0b87ab0a2adae Mon Sep 17 00:00:00 2001 From: Adam Brooks Date: Wed, 7 Sep 2005 17:24:36 +0100 Subject: [ARM] 2871/1: Fixes an issue with gettimeofday not working correctly on Intel IOP3xx processors Patch from Adam Brooks The current gettimeofday implementation for the IOP3xx processors reads the contents of the timer interrupt register and does math on the value to figure out exactly what time it is. To do this it multiplies the contents of the timer register with a large constant. The result is then divided by a large constant. Unfortunately the result of the first multiplication is often too large for the register to hold. The solution is to combine the two large constants to a single smaller constant at compile time. Then the timer value can be divided by single smaller constant without any overflow issues. Signed-off-by: Adam Brooks Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- arch/arm/mach-iop3xx/iop321-time.c | 2 +- arch/arm/mach-iop3xx/iop331-time.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-iop3xx/iop321-time.c b/arch/arm/mach-iop3xx/iop321-time.c index d53af1669502..0039793b694a 100644 --- a/arch/arm/mach-iop3xx/iop321-time.c +++ b/arch/arm/mach-iop3xx/iop321-time.c @@ -60,7 +60,7 @@ static unsigned long iop321_gettimeoffset(void) /* * Now convert them to usec. */ - usec = (unsigned long)(elapsed * (tick_nsec / 1000)) / LATCH; + usec = (unsigned long)(elapsed / (CLOCK_TICK_RATE/1000000)); return usec; } diff --git a/arch/arm/mach-iop3xx/iop331-time.c b/arch/arm/mach-iop3xx/iop331-time.c index 1a6d9d661e4b..8eddfac7e2b0 100644 --- a/arch/arm/mach-iop3xx/iop331-time.c +++ b/arch/arm/mach-iop3xx/iop331-time.c @@ -58,7 +58,7 @@ static unsigned long iop331_gettimeoffset(void) /* * Now convert them to usec. */ - usec = (unsigned long)(elapsed * (tick_nsec / 1000)) / LATCH; + usec = (unsigned long)(elapsed / (CLOCK_TICK_RATE/1000000)); return usec; } -- cgit v1.2.2 From bafa49cc1b800df4748b29e2b038ff029d7c8747 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 7 Sep 2005 17:24:48 +0100 Subject: [ARM] 2884/1: BAST - fix PC104 IRQ routing Patch from Ben Dooks This has been broken for a while now, so fix the problems with the code, test and bring up to date. This also makes the code conditional on an Kconfig option Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/Kconfig | 8 +++++ arch/arm/mach-s3c2410/Makefile | 4 +++ arch/arm/mach-s3c2410/bast-irq.c | 77 ++++++++++++++++++++++++++++++---------- 3 files changed, 71 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index da818344f954..06807c6ee68a 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -18,6 +18,14 @@ config ARCH_BAST Product page: . +config BAST_PC104_IRQ + bool "BAST PC104 IRQ support" + depends on ARCH_BAST + default y + help + Say Y here to enable the PC104 IRQ routing on the + Simtec BAST (EB2410ITX) + config ARCH_H1940 bool "IPAQ H1940" select CPU_S3C2410 diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index 023c4f59a345..b4f1e051c768 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -26,6 +26,10 @@ obj-$(CONFIG_CPU_S3C2440) += s3c2440.o s3c2440-dsc.o obj-$(CONFIG_CPU_S3C2440) += s3c2440-irq.o obj-$(CONFIG_CPU_S3C2440) += s3c2440-clock.o +# bast extras + +obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o + # machine specific support obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c index 49914709fa09..fbbeb0553006 100644 --- a/arch/arm/mach-s3c2410/bast-irq.c +++ b/arch/arm/mach-s3c2410/bast-irq.c @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s3c2410/bast-irq.c * - * Copyright (c) 2004 Simtec Electronics + * Copyright (c) 2003,2005 Simtec Electronics * Ben Dooks * * http://www.simtec.co.uk/products/EB2410ITX/ @@ -21,7 +21,8 @@ * * Modifications: * 08-Jan-2003 BJD Moved from central IRQ code - */ + * 21-Aug-2005 BJD Fixed missing code and compile errors +*/ #include @@ -30,12 +31,19 @@ #include #include +#include + #include #include #include #include -#include + +#include +#include +#include + +#include "irq.h" #if 0 #include @@ -79,15 +87,15 @@ bast_pc104_mask(unsigned int irqno) temp = __raw_readb(BAST_VA_PC104_IRQMASK); temp &= ~bast_pc104_irqmasks[irqno]; __raw_writeb(temp, BAST_VA_PC104_IRQMASK); - - if (temp == 0) - bast_extint_mask(IRQ_ISA); } static void -bast_pc104_ack(unsigned int irqno) +bast_pc104_maskack(unsigned int irqno) { - bast_extint_ack(IRQ_ISA); + struct irqdesc *desc = irq_desc + IRQ_ISA; + + bast_pc104_mask(irqno); + desc->chip->ack(IRQ_ISA); } static void @@ -98,14 +106,12 @@ bast_pc104_unmask(unsigned int irqno) temp = __raw_readb(BAST_VA_PC104_IRQMASK); temp |= bast_pc104_irqmasks[irqno]; __raw_writeb(temp, BAST_VA_PC104_IRQMASK); - - bast_extint_unmask(IRQ_ISA); } -static struct bast_pc104_chip = { +static struct irqchip bast_pc104_chip = { .mask = bast_pc104_mask, .unmask = bast_pc104_unmask, - .ack = bast_pc104_ack + .ack = bast_pc104_maskack }; static void @@ -119,14 +125,49 @@ bast_irq_pc104_demux(unsigned int irq, stat = __raw_readb(BAST_VA_PC104_IRQREQ) & 0xf; - for (i = 0; i < 4 && stat != 0; i++) { - if (stat & 1) { - irqno = bast_pc104_irqs[i]; - desc = irq_desc + irqno; + if (unlikely(stat == 0)) { + /* ack if we get an irq with nothing (ie, startup) */ + + desc = irq_desc + IRQ_ISA; + desc->chip->ack(IRQ_ISA); + } else { + /* handle the IRQ */ + + for (i = 0; stat != 0; i++, stat >>= 1) { + if (stat & 1) { + irqno = bast_pc104_irqs[i]; - desc_handle_irq(irqno, desc, regs); + desc_handle_irq(irqno, irq_desc + irqno, regs); + } } + } +} - stat >>= 1; +static __init int bast_irq_init(void) +{ + unsigned int i; + + if (machine_is_bast()) { + printk(KERN_INFO "BAST PC104 IRQ routing, (c) 2005 Simtec Electronics\n"); + + /* zap all the IRQs */ + + __raw_writeb(0x0, BAST_VA_PC104_IRQMASK); + + set_irq_chained_handler(IRQ_ISA, bast_irq_pc104_demux); + + /* reigster our IRQs */ + + for (i = 0; i < 4; i++) { + unsigned int irqno = bast_pc104_irqs[i]; + + set_irq_chip(irqno, &bast_pc104_chip); + set_irq_handler(irqno, do_level_IRQ); + set_irq_flags(irqno, IRQF_VALID); + } } + + return 0; } + +arch_initcall(bast_irq_init); -- cgit v1.2.2 From 842363ff5fd79ce75c311175ea832901e2b2d40e Mon Sep 17 00:00:00 2001 From: Eugene Surovegin Date: Tue, 6 Sep 2005 15:16:13 -0700 Subject: [PATCH] ppc32: fix ocp_device_suspend to use pm_message_t instead of u32 Recent "u32 -> pm_message_t" change triggered hidden bug in ocp_device_suspend. Fix it to correctly use pm_message_t instead of u32. Signed-off-by: Eugene Surovegin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/syslib/ocp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ppc/syslib/ocp.c b/arch/ppc/syslib/ocp.c index e5fd2ae503ea..9ccce438bd7a 100644 --- a/arch/ppc/syslib/ocp.c +++ b/arch/ppc/syslib/ocp.c @@ -165,7 +165,7 @@ ocp_device_remove(struct device *dev) } static int -ocp_device_suspend(struct device *dev, u32 state) +ocp_device_suspend(struct device *dev, pm_message_t state) { struct ocp_device *ocp_dev = to_ocp_dev(dev); struct ocp_driver *ocp_drv = to_ocp_drv(dev->driver); -- cgit v1.2.2 From 54d5d42404e7705cf3804593189e963350d470e5 Mon Sep 17 00:00:00 2001 From: Ashok Raj Date: Tue, 6 Sep 2005 15:16:15 -0700 Subject: [PATCH] x86/x86_64: deferred handling of writes to /proc/irqxx/smp_affinity When handling writes to /proc/irq, current code is re-programming rte entries directly. This is not recommended and could potentially cause chipset's to lockup, or cause missing interrupts. CONFIG_IRQ_BALANCE does this correctly, where it re-programs only when the interrupt is pending. The same needs to be done for /proc/irq handling as well. Otherwise user space irq balancers are really not doing the right thing. - Changed pending_irq_balance_cpumask to pending_irq_migrate_cpumask for lack of a generic name. - added move_irq out of IRQ_BALANCE, and added this same to X86_64 - Added new proc handler for write, so we can do deferred write at irq handling time. - Display of /proc/irq/XX/smp_affinity used to display CPU_MASKALL, instead it now shows only active cpu masks, or exactly what was set. - Provided a common move_irq implementation, instead of duplicating when using generic irq framework. Tested on i386/x86_64 and ia64 with CONFIG_PCI_MSI turned on and off. Tested UP builds as well. MSI testing: tbd: I have cards, need to look for a x-over cable, although I did test an earlier version of this patch. Will test in a couple days. Signed-off-by: Ashok Raj Acked-by: Zwane Mwaikambo Grudgingly-acked-by: Andi Kleen Signed-off-by: Coywolf Qi Hunt Signed-off-by: Ashok Raj Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/Kconfig | 5 +++ arch/i386/kernel/io_apic.c | 55 ++++++++++++----------- arch/ia64/Kconfig | 5 +++ arch/ia64/kernel/irq.c | 39 +---------------- arch/x86_64/Kconfig | 5 +++ arch/x86_64/kernel/io_apic.c | 102 +++++++++++++++++++++++++++---------------- 6 files changed, 109 insertions(+), 102 deletions(-) (limited to 'arch') diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index 3b3b017e1c15..4b7de3e1e57b 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -1318,6 +1318,11 @@ config GENERIC_IRQ_PROBE bool default y +config GENERIC_PENDING_IRQ + bool + depends on GENERIC_HARDIRQS && SMP + default y + config X86_SMP bool depends on SMP && !X86_VOYAGER diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c index 6578f40bd501..4a5940431579 100644 --- a/arch/i386/kernel/io_apic.c +++ b/arch/i386/kernel/io_apic.c @@ -33,6 +33,7 @@ #include #include #include + #include #include #include @@ -222,13 +223,21 @@ static void clear_IO_APIC (void) clear_IO_APIC_pin(apic, pin); } +#ifdef CONFIG_SMP static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask) { unsigned long flags; int pin; struct irq_pin_list *entry = irq_2_pin + irq; unsigned int apicid_value; + cpumask_t tmp; + cpus_and(tmp, cpumask, cpu_online_map); + if (cpus_empty(tmp)) + tmp = TARGET_CPUS; + + cpus_and(cpumask, tmp, CPU_MASK_ALL); + apicid_value = cpu_mask_to_apicid(cpumask); /* Prepare to do the io_apic_write */ apicid_value = apicid_value << 24; @@ -242,6 +251,7 @@ static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask) break; entry = irq_2_pin + entry->next; } + set_irq_info(irq, cpumask); spin_unlock_irqrestore(&ioapic_lock, flags); } @@ -259,7 +269,6 @@ static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask) # define Dprintk(x...) # endif -cpumask_t __cacheline_aligned pending_irq_balance_cpumask[NR_IRQS]; #define IRQBALANCE_CHECK_ARCH -999 static int irqbalance_disabled = IRQBALANCE_CHECK_ARCH; @@ -328,12 +337,7 @@ static inline void balance_irq(int cpu, int irq) cpus_and(allowed_mask, cpu_online_map, irq_affinity[irq]); new_cpu = move(cpu, allowed_mask, now, 1); if (cpu != new_cpu) { - irq_desc_t *desc = irq_desc + irq; - unsigned long flags; - - spin_lock_irqsave(&desc->lock, flags); - pending_irq_balance_cpumask[irq] = cpumask_of_cpu(new_cpu); - spin_unlock_irqrestore(&desc->lock, flags); + set_pending_irq(irq, cpumask_of_cpu(new_cpu)); } } @@ -528,16 +532,12 @@ tryanotherirq: cpus_and(tmp, target_cpu_mask, allowed_mask); if (!cpus_empty(tmp)) { - irq_desc_t *desc = irq_desc + selected_irq; - unsigned long flags; Dprintk("irq = %d moved to cpu = %d\n", selected_irq, min_loaded); /* mark for change destination */ - spin_lock_irqsave(&desc->lock, flags); - pending_irq_balance_cpumask[selected_irq] = - cpumask_of_cpu(min_loaded); - spin_unlock_irqrestore(&desc->lock, flags); + set_pending_irq(selected_irq, cpumask_of_cpu(min_loaded)); + /* Since we made a change, come back sooner to * check for more variation. */ @@ -568,7 +568,8 @@ static int balanced_irq(void *unused) /* push everything to CPU 0 to give us a starting point. */ for (i = 0 ; i < NR_IRQS ; i++) { - pending_irq_balance_cpumask[i] = cpumask_of_cpu(0); + pending_irq_cpumask[i] = cpumask_of_cpu(0); + set_pending_irq(i, cpumask_of_cpu(0)); } for ( ; ; ) { @@ -647,20 +648,9 @@ int __init irqbalance_disable(char *str) __setup("noirqbalance", irqbalance_disable); -static inline void move_irq(int irq) -{ - /* note - we hold the desc->lock */ - if (unlikely(!cpus_empty(pending_irq_balance_cpumask[irq]))) { - set_ioapic_affinity_irq(irq, pending_irq_balance_cpumask[irq]); - cpus_clear(pending_irq_balance_cpumask[irq]); - } -} - late_initcall(balanced_irq_init); - -#else /* !CONFIG_IRQBALANCE */ -static inline void move_irq(int irq) { } #endif /* CONFIG_IRQBALANCE */ +#endif /* CONFIG_SMP */ #ifndef CONFIG_SMP void fastcall send_IPI_self(int vector) @@ -820,6 +810,7 @@ EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector); * we need to reprogram the ioredtbls to cater for the cpus which have come online * so mask in all cases should simply be TARGET_CPUS */ +#ifdef CONFIG_SMP void __init setup_ioapic_dest(void) { int pin, ioapic, irq, irq_entry; @@ -838,6 +829,7 @@ void __init setup_ioapic_dest(void) } } +#endif /* * EISA Edge/Level control register, ELCR @@ -1249,6 +1241,7 @@ static void __init setup_IO_APIC_irqs(void) spin_lock_irqsave(&ioapic_lock, flags); io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1)); io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0)); + set_native_irq_info(irq, TARGET_CPUS); spin_unlock_irqrestore(&ioapic_lock, flags); } } @@ -1944,6 +1937,7 @@ static void ack_edge_ioapic_vector(unsigned int vector) { int irq = vector_to_irq(vector); + move_irq(vector); ack_edge_ioapic_irq(irq); } @@ -1958,6 +1952,7 @@ static void end_level_ioapic_vector (unsigned int vector) { int irq = vector_to_irq(vector); + move_irq(vector); end_level_ioapic_irq(irq); } @@ -1975,14 +1970,17 @@ static void unmask_IO_APIC_vector (unsigned int vector) unmask_IO_APIC_irq(irq); } +#ifdef CONFIG_SMP static void set_ioapic_affinity_vector (unsigned int vector, cpumask_t cpu_mask) { int irq = vector_to_irq(vector); + set_native_irq_info(vector, cpu_mask); set_ioapic_affinity_irq(irq, cpu_mask); } #endif +#endif /* * Level and edge triggered IO-APIC interrupts need different handling, @@ -2000,7 +1998,9 @@ static struct hw_interrupt_type ioapic_edge_type = { .disable = disable_edge_ioapic, .ack = ack_edge_ioapic, .end = end_edge_ioapic, +#ifdef CONFIG_SMP .set_affinity = set_ioapic_affinity, +#endif }; static struct hw_interrupt_type ioapic_level_type = { @@ -2011,7 +2011,9 @@ static struct hw_interrupt_type ioapic_level_type = { .disable = disable_level_ioapic, .ack = mask_and_ack_level_ioapic, .end = end_level_ioapic, +#ifdef CONFIG_SMP .set_affinity = set_ioapic_affinity, +#endif }; static inline void init_IO_APIC_traps(void) @@ -2569,6 +2571,7 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a spin_lock_irqsave(&ioapic_lock, flags); io_apic_write(ioapic, 0x11+2*pin, *(((int *)&entry)+1)); io_apic_write(ioapic, 0x10+2*pin, *(((int *)&entry)+0)); + set_native_irq_info(use_pci_vector() ? entry.vector : irq, TARGET_CPUS); spin_unlock_irqrestore(&ioapic_lock, flags); return 0; diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 3deced637f07..17b5dbf8c311 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -434,6 +434,11 @@ config GENERIC_IRQ_PROBE bool default y +config GENERIC_PENDING_IRQ + bool + depends on GENERIC_HARDIRQS && SMP + default y + source "arch/ia64/hp/sim/Kconfig" source "arch/ia64/oprofile/Kconfig" diff --git a/arch/ia64/kernel/irq.c b/arch/ia64/kernel/irq.c index 28f2aadc38d0..205d98028261 100644 --- a/arch/ia64/kernel/irq.c +++ b/arch/ia64/kernel/irq.c @@ -91,23 +91,8 @@ skip: } #ifdef CONFIG_SMP -/* - * This is updated when the user sets irq affinity via /proc - */ -static cpumask_t __cacheline_aligned pending_irq_cpumask[NR_IRQS]; -static unsigned long pending_irq_redir[BITS_TO_LONGS(NR_IRQS)]; - static char irq_redir [NR_IRQS]; // = { [0 ... NR_IRQS-1] = 1 }; -/* - * Arch specific routine for deferred write to iosapic rte to reprogram - * intr destination. - */ -void proc_set_irq_affinity(unsigned int irq, cpumask_t mask_val) -{ - pending_irq_cpumask[irq] = mask_val; -} - void set_irq_affinity_info (unsigned int irq, int hwid, int redir) { cpumask_t mask = CPU_MASK_NONE; @@ -116,32 +101,10 @@ void set_irq_affinity_info (unsigned int irq, int hwid, int redir) if (irq < NR_IRQS) { irq_affinity[irq] = mask; + set_irq_info(irq, mask); irq_redir[irq] = (char) (redir & 0xff); } } - - -void move_irq(int irq) -{ - /* note - we hold desc->lock */ - cpumask_t tmp; - irq_desc_t *desc = irq_descp(irq); - int redir = test_bit(irq, pending_irq_redir); - - if (unlikely(!desc->handler->set_affinity)) - return; - - if (!cpus_empty(pending_irq_cpumask[irq])) { - cpus_and(tmp, pending_irq_cpumask[irq], cpu_online_map); - if (unlikely(!cpus_empty(tmp))) { - desc->handler->set_affinity(irq | (redir ? IA64_IRQ_REDIRECTED : 0), - pending_irq_cpumask[irq]); - } - cpus_clear(pending_irq_cpumask[irq]); - } -} - - #endif /* CONFIG_SMP */ #ifdef CONFIG_HOTPLUG_CPU diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index 75e52c57f19c..251ce7cf1a38 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -441,6 +441,11 @@ config ISA_DMA_API bool default y +config GENERIC_PENDING_IRQ + bool + depends on GENERIC_HARDIRQS && SMP + default y + menu "Power management options" source kernel/power/Kconfig diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c index d206d7e49cf5..76bcc4e6979d 100644 --- a/arch/x86_64/kernel/io_apic.c +++ b/arch/x86_64/kernel/io_apic.c @@ -78,6 +78,54 @@ int vector_irq[NR_VECTORS] = { [0 ... NR_VECTORS - 1] = -1}; #define vector_to_irq(vector) (vector) #endif +#define __DO_ACTION(R, ACTION, FINAL) \ + \ +{ \ + int pin; \ + struct irq_pin_list *entry = irq_2_pin + irq; \ + \ + for (;;) { \ + unsigned int reg; \ + pin = entry->pin; \ + if (pin == -1) \ + break; \ + reg = io_apic_read(entry->apic, 0x10 + R + pin*2); \ + reg ACTION; \ + io_apic_modify(entry->apic, reg); \ + if (!entry->next) \ + break; \ + entry = irq_2_pin + entry->next; \ + } \ + FINAL; \ +} + +#ifdef CONFIG_SMP +static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t mask) +{ + unsigned long flags; + unsigned int dest; + cpumask_t tmp; + + cpus_and(tmp, mask, cpu_online_map); + if (cpus_empty(tmp)) + tmp = TARGET_CPUS; + + cpus_and(mask, tmp, CPU_MASK_ALL); + + dest = cpu_mask_to_apicid(mask); + + /* + * Only the high 8 bits are valid. + */ + dest = SET_APIC_LOGICAL_ID(dest); + + spin_lock_irqsave(&ioapic_lock, flags); + __DO_ACTION(1, = dest, ) + set_irq_info(irq, mask); + spin_unlock_irqrestore(&ioapic_lock, flags); +} +#endif + /* * The common case is 1:1 IRQ<->pin mappings. Sometimes there are * shared ISA-space IRQs, so we have to support them. We are super @@ -101,26 +149,6 @@ static void add_pin_to_irq(unsigned int irq, int apic, int pin) entry->pin = pin; } -#define __DO_ACTION(R, ACTION, FINAL) \ - \ -{ \ - int pin; \ - struct irq_pin_list *entry = irq_2_pin + irq; \ - \ - for (;;) { \ - unsigned int reg; \ - pin = entry->pin; \ - if (pin == -1) \ - break; \ - reg = io_apic_read(entry->apic, 0x10 + R + pin*2); \ - reg ACTION; \ - io_apic_modify(entry->apic, reg); \ - if (!entry->next) \ - break; \ - entry = irq_2_pin + entry->next; \ - } \ - FINAL; \ -} #define DO_ACTION(name,R,ACTION, FINAL) \ \ @@ -767,6 +795,7 @@ static void __init setup_IO_APIC_irqs(void) spin_lock_irqsave(&ioapic_lock, flags); io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1)); io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0)); + set_native_irq_info(irq, TARGET_CPUS); spin_unlock_irqrestore(&ioapic_lock, flags); } } @@ -1314,6 +1343,7 @@ static unsigned int startup_edge_ioapic_irq(unsigned int irq) */ static void ack_edge_ioapic_irq(unsigned int irq) { + move_irq(irq); if ((irq_desc[irq].status & (IRQ_PENDING | IRQ_DISABLED)) == (IRQ_PENDING | IRQ_DISABLED)) mask_IO_APIC_irq(irq); @@ -1343,26 +1373,10 @@ static unsigned int startup_level_ioapic_irq (unsigned int irq) static void end_level_ioapic_irq (unsigned int irq) { + move_irq(irq); ack_APIC_irq(); } -static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t mask) -{ - unsigned long flags; - unsigned int dest; - - dest = cpu_mask_to_apicid(mask); - - /* - * Only the high 8 bits are valid. - */ - dest = SET_APIC_LOGICAL_ID(dest); - - spin_lock_irqsave(&ioapic_lock, flags); - __DO_ACTION(1, = dest, ) - spin_unlock_irqrestore(&ioapic_lock, flags); -} - #ifdef CONFIG_PCI_MSI static unsigned int startup_edge_ioapic_vector(unsigned int vector) { @@ -1375,6 +1389,7 @@ static void ack_edge_ioapic_vector(unsigned int vector) { int irq = vector_to_irq(vector); + move_native_irq(vector); ack_edge_ioapic_irq(irq); } @@ -1389,6 +1404,7 @@ static void end_level_ioapic_vector (unsigned int vector) { int irq = vector_to_irq(vector); + move_native_irq(vector); end_level_ioapic_irq(irq); } @@ -1406,14 +1422,17 @@ static void unmask_IO_APIC_vector (unsigned int vector) unmask_IO_APIC_irq(irq); } +#ifdef CONFIG_SMP static void set_ioapic_affinity_vector (unsigned int vector, cpumask_t cpu_mask) { int irq = vector_to_irq(vector); + set_native_irq_info(vector, cpu_mask); set_ioapic_affinity_irq(irq, cpu_mask); } -#endif +#endif // CONFIG_SMP +#endif // CONFIG_PCI_MSI /* * Level and edge triggered IO-APIC interrupts need different handling, @@ -1432,7 +1451,9 @@ static struct hw_interrupt_type ioapic_edge_type = { .disable = disable_edge_ioapic, .ack = ack_edge_ioapic, .end = end_edge_ioapic, +#ifdef CONFIG_SMP .set_affinity = set_ioapic_affinity, +#endif }; static struct hw_interrupt_type ioapic_level_type = { @@ -1443,7 +1464,9 @@ static struct hw_interrupt_type ioapic_level_type = { .disable = disable_level_ioapic, .ack = mask_and_ack_level_ioapic, .end = end_level_ioapic, +#ifdef CONFIG_SMP .set_affinity = set_ioapic_affinity, +#endif }; static inline void init_IO_APIC_traps(void) @@ -1918,6 +1941,7 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a spin_lock_irqsave(&ioapic_lock, flags); io_apic_write(ioapic, 0x11+2*pin, *(((int *)&entry)+1)); io_apic_write(ioapic, 0x10+2*pin, *(((int *)&entry)+0)); + set_native_irq_info(use_pci_vector() ? entry.vector : irq, TARGET_CPUS); spin_unlock_irqrestore(&ioapic_lock, flags); return 0; @@ -1931,6 +1955,7 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a * we need to reprogram the ioredtbls to cater for the cpus which have come online * so mask in all cases should simply be TARGET_CPUS */ +#ifdef CONFIG_SMP void __init setup_ioapic_dest(void) { int pin, ioapic, irq, irq_entry; @@ -1949,3 +1974,4 @@ void __init setup_ioapic_dest(void) } } +#endif -- cgit v1.2.2 From c078d3266e58a3edd698b9f143f78fc585679031 Mon Sep 17 00:00:00 2001 From: Zwane Mwaikambo Date: Tue, 6 Sep 2005 15:16:16 -0700 Subject: [PATCH] x86_64: print processor number in show_regs Up to date I've been using the GS value to determine the processor number in dumps from show_regs, however this can be cumbersome to do if you don't have the vmlinux to verify with the address of cpu_pda, how about the following? I considered using hard_smp_processor_id for robustness but we already dereference current so we're already relying on MSR_GS_BASE being sane. Signed-off-by: Zwane Mwaikambo Acked-by: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/process.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/x86_64/kernel/process.c b/arch/x86_64/kernel/process.c index 7577f9d7a75d..8661f82ac70b 100644 --- a/arch/x86_64/kernel/process.c +++ b/arch/x86_64/kernel/process.c @@ -310,6 +310,7 @@ void __show_regs(struct pt_regs * regs) void show_regs(struct pt_regs *regs) { + printk("CPU %d:", smp_processor_id()); __show_regs(regs); show_trace(®s->rsp); } -- cgit v1.2.2 From 0c2b9d5c035f5a82c9c4ba717984d04838a0701e Mon Sep 17 00:00:00 2001 From: Ashok Raj Date: Tue, 6 Sep 2005 15:16:18 -0700 Subject: [PATCH] x86_64: Fix cluster mode send_IPI_allbutself to use get_cpu()/put_cpu() Need to ensure we dont get prempted when we clear ourself from mask when using clustered mode genapic code. Signed-off-by: Ashok Raj Acked-by: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/genapic_cluster.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/genapic_cluster.c b/arch/x86_64/kernel/genapic_cluster.c index 9703da7202e3..f6523dd1bc09 100644 --- a/arch/x86_64/kernel/genapic_cluster.c +++ b/arch/x86_64/kernel/genapic_cluster.c @@ -72,10 +72,14 @@ static void cluster_send_IPI_mask(cpumask_t mask, int vector) static void cluster_send_IPI_allbutself(int vector) { cpumask_t mask = cpu_online_map; - cpu_clear(smp_processor_id(), mask); + int me = get_cpu(); /* Ensure we are not preempted when we clear */ + + cpu_clear(me, mask); if (!cpus_empty(mask)) cluster_send_IPI_mask(mask, vector); + + put_cpu(); } static void cluster_send_IPI_all(int vector) -- cgit v1.2.2 From a888cebe17e39476e5ca18c3a4bd96c6775070db Mon Sep 17 00:00:00 2001 From: Ashok Raj Date: Tue, 6 Sep 2005 15:16:19 -0700 Subject: [PATCH] x86_64: create sysfs entries for cpu only for present cpus Need to create sysfs only for cpus that are present. Without which we see NR_CPUS entries created when we have CONFIG_HOTPLUG and CONFIG_HOTPLUG_CPU enabled. Signed-off-by: Ashok Raj Acked-by: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/mach-default/topology.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/i386/mach-default/topology.c b/arch/i386/mach-default/topology.c index 23395fff35d1..b64314069e78 100644 --- a/arch/i386/mach-default/topology.c +++ b/arch/i386/mach-default/topology.c @@ -76,7 +76,7 @@ static int __init topology_init(void) for_each_online_node(i) arch_register_node(i); - for_each_cpu(i) + for_each_present_cpu(i) arch_register_cpu(i); return 0; } @@ -87,7 +87,7 @@ static int __init topology_init(void) { int i; - for_each_cpu(i) + for_each_present_cpu(i) arch_register_cpu(i); return 0; } -- cgit v1.2.2 From 48c8b1134249432318c8e5d19adc37c45242c4b1 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Tue, 6 Sep 2005 15:16:20 -0700 Subject: [PATCH] x86_64: Fix off by one in e820_mapped This allows a valid iommu placed immediately after memory to work, to be recognized as after the last byte of memory and not overlapping it. Signed-off-by: Eric W. Biederman Acked-by: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/e820.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/e820.c b/arch/x86_64/kernel/e820.c index b548dea4e5b9..116ac5f53dce 100644 --- a/arch/x86_64/kernel/e820.c +++ b/arch/x86_64/kernel/e820.c @@ -85,7 +85,7 @@ int __init e820_mapped(unsigned long start, unsigned long end, unsigned type) struct e820entry *ei = &e820.map[i]; if (type && ei->type != type) continue; - if (ei->addr >= end || ei->addr + ei->size < start) + if (ei->addr >= end || ei->addr + ei->size <= start) continue; return 1; } -- cgit v1.2.2 From 8446f1d391f3d27e6bf9c43d4cbcdac0ca720417 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 6 Sep 2005 15:16:27 -0700 Subject: [PATCH] detect soft lockups This patch adds a new kernel debug feature: CONFIG_DETECT_SOFTLOCKUP. When enabled then per-CPU watchdog threads are started, which try to run once per second. If they get delayed for more than 10 seconds then a callback from the timer interrupt detects this condition and prints out a warning message and a stack dump (once per lockup incident). The feature is otherwise non-intrusive, it doesnt try to unlock the box in any way, it only gets the debug info out, automatically, and on all CPUs affected by the lockup. Signed-off-by: Ingo Molnar Signed-off-by: Nishanth Aravamudan Signed-Off-By: Matthias Urlichs Signed-off-by: Richard Purdie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/nmi.c | 5 +++++ arch/i386/kernel/time.c | 1 + arch/x86_64/kernel/nmi.c | 2 ++ arch/x86_64/kernel/time.c | 1 + 4 files changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/i386/kernel/nmi.c b/arch/i386/kernel/nmi.c index 8bbdbda07a2d..0178457db721 100644 --- a/arch/i386/kernel/nmi.c +++ b/arch/i386/kernel/nmi.c @@ -478,6 +478,11 @@ void touch_nmi_watchdog (void) */ for (i = 0; i < NR_CPUS; i++) alert_counter[i] = 0; + + /* + * Tickle the softlockup detector too: + */ + touch_softlockup_watchdog(); } extern void die_nmi(struct pt_regs *, const char *msg); diff --git a/arch/i386/kernel/time.c b/arch/i386/kernel/time.c index 6f794a78ee1e..b0c5ee2b3446 100644 --- a/arch/i386/kernel/time.c +++ b/arch/i386/kernel/time.c @@ -422,6 +422,7 @@ static int timer_resume(struct sys_device *dev) last_timer->resume(); cur_timer = last_timer; last_timer = NULL; + touch_softlockup_watchdog(); return 0; } diff --git a/arch/x86_64/kernel/nmi.c b/arch/x86_64/kernel/nmi.c index 64a8e05d5811..84cae81fff8b 100644 --- a/arch/x86_64/kernel/nmi.c +++ b/arch/x86_64/kernel/nmi.c @@ -463,6 +463,8 @@ void touch_nmi_watchdog (void) */ for (i = 0; i < NR_CPUS; i++) per_cpu(nmi_touch, i) = 1; + + touch_softlockup_watchdog(); } void nmi_watchdog_tick (struct pt_regs * regs, unsigned reason) diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c index 66bf6ddeb0c3..2b5d9da912a2 100644 --- a/arch/x86_64/kernel/time.c +++ b/arch/x86_64/kernel/time.c @@ -1041,6 +1041,7 @@ static int timer_resume(struct sys_device *dev) write_sequnlock_irqrestore(&xtime_lock,flags); jiffies += sleep_length; wall_jiffies += sleep_length; + touch_softlockup_watchdog(); return 0; } -- cgit v1.2.2 From c3d8c1414573be8cf7c8fdc1e076935697c7f6af Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Tue, 6 Sep 2005 15:16:33 -0700 Subject: [PATCH] More __read_mostly variables Move some more frequently read variables that showed up during some of our performance tests as sometimes ending up in hot cachelines to the read_mostly section. Fix: Move the __read_mostly from before hpet_usec_quotient to follow the variable like the other uses of __read_mostly. Signed-off-by: Alok N Kataria Signed-off-by: Christoph Lameter Signed-off-by: Shai Fultheim Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/setup.c | 2 +- arch/i386/kernel/timers/timer_hpet.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c index 294bcca985ab..e29fd5aeaf8e 100644 --- a/arch/i386/kernel/setup.c +++ b/arch/i386/kernel/setup.c @@ -82,7 +82,7 @@ EXPORT_SYMBOL(efi_enabled); /* cpu data as detected by the assembly code in head.S */ struct cpuinfo_x86 new_cpu_data __initdata = { 0, 0, 0, 0, -1, 1, 0, 0, -1 }; /* common cpu data for all cpus */ -struct cpuinfo_x86 boot_cpu_data = { 0, 0, 0, 0, -1, 1, 0, 0, -1 }; +struct cpuinfo_x86 boot_cpu_data __read_mostly = { 0, 0, 0, 0, -1, 1, 0, 0, -1 }; EXPORT_SYMBOL(boot_cpu_data); unsigned long mmu_cr4_features; diff --git a/arch/i386/kernel/timers/timer_hpet.c b/arch/i386/kernel/timers/timer_hpet.c index 001de97c9e4a..6dbb29f834e8 100644 --- a/arch/i386/kernel/timers/timer_hpet.c +++ b/arch/i386/kernel/timers/timer_hpet.c @@ -18,7 +18,7 @@ #include "mach_timer.h" #include -static unsigned long __read_mostly hpet_usec_quotient; /* convert hpet clks to usec */ +static unsigned long hpet_usec_quotient __read_mostly; /* convert hpet clks to usec */ static unsigned long tsc_hpet_quotient; /* convert tsc to hpet clks */ static unsigned long hpet_last; /* hpet counter value at last tick*/ static unsigned long last_tsc_low; /* lsb 32 bits of Time Stamp Counter */ -- cgit v1.2.2 From 19306059cd7fedaf96b4b0260a9a8a45e513c857 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Tue, 6 Sep 2005 15:16:35 -0700 Subject: [PATCH] NMI: Update NMI users of RCU to use new API Uses of RCU for dynamically changeable NMI handlers need to use the new rcu_dereference() and rcu_assign_pointer() facilities. This change makes it clear that these uses are safe from a memory-barrier viewpoint, but the main purpose is to document exactly what operations are being protected by RCU. This has been tested on x86 and x86-64, which are the only architectures affected by this change. Signed-off-by: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/traps.c | 4 ++-- arch/x86_64/kernel/nmi.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c index 54629bb5893a..029bf94cda7d 100644 --- a/arch/i386/kernel/traps.c +++ b/arch/i386/kernel/traps.c @@ -657,7 +657,7 @@ fastcall void do_nmi(struct pt_regs * regs, long error_code) ++nmi_count(cpu); - if (!nmi_callback(regs, cpu)) + if (!rcu_dereference(nmi_callback)(regs, cpu)) default_do_nmi(regs); nmi_exit(); @@ -665,7 +665,7 @@ fastcall void do_nmi(struct pt_regs * regs, long error_code) void set_nmi_callback(nmi_callback_t callback) { - nmi_callback = callback; + rcu_assign_pointer(nmi_callback, callback); } EXPORT_SYMBOL_GPL(set_nmi_callback); diff --git a/arch/x86_64/kernel/nmi.c b/arch/x86_64/kernel/nmi.c index 84cae81fff8b..caf164959e19 100644 --- a/arch/x86_64/kernel/nmi.c +++ b/arch/x86_64/kernel/nmi.c @@ -524,14 +524,14 @@ asmlinkage void do_nmi(struct pt_regs * regs, long error_code) nmi_enter(); add_pda(__nmi_count,1); - if (!nmi_callback(regs, cpu)) + if (!rcu_dereference(nmi_callback)(regs, cpu)) default_do_nmi(regs); nmi_exit(); } void set_nmi_callback(nmi_callback_t callback) { - nmi_callback = callback; + rcu_assign_pointer(nmi_callback, callback); } void unset_nmi_callback(void) -- cgit v1.2.2 From 202e5979af4d91c7ca05892641131dee22653259 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Tue, 6 Sep 2005 15:16:40 -0700 Subject: [PATCH] compat: be more consistent about [ug]id_t When I first wrote the compat layer patches, I was somewhat cavalier about the definition of compat_uid_t and compat_gid_t (or maybe I just misunderstood :-)). This patch makes the compat types much more consistent with the types we are being compatible with and hopefully will fix a few bugs along the way. compat type type in compat arch __compat_[ug]id_t __kernel_[ug]id_t __compat_[ug]id32_t __kernel_[ug]id32_t compat_[ug]id_t [ug]id_t The difference is that compat_uid_t is always 32 bits (for the archs we care about) but __compat_uid_t may be 16 bits on some. Signed-off-by: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/mips/kernel/linux32.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index 4613219dd73e..ece4564919d8 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -546,20 +546,20 @@ struct msgbuf32 { s32 mtype; char mtext[1]; }; struct ipc_perm32 { key_t key; - compat_uid_t uid; - compat_gid_t gid; - compat_uid_t cuid; - compat_gid_t cgid; + __compat_uid_t uid; + __compat_gid_t gid; + __compat_uid_t cuid; + __compat_gid_t cgid; compat_mode_t mode; unsigned short seq; }; struct ipc64_perm32 { key_t key; - compat_uid_t uid; - compat_gid_t gid; - compat_uid_t cuid; - compat_gid_t cgid; + __compat_uid_t uid; + __compat_gid_t gid; + __compat_uid_t cuid; + __compat_gid_t cgid; compat_mode_t mode; unsigned short seq; unsigned short __pad1; -- cgit v1.2.2 From 573fc113133e0b0984d2c0090e706c6506661f91 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 6 Sep 2005 15:16:58 -0700 Subject: [PATCH] move m68k rtc drivers over to initcalls this gets rid of the last two explicit initializations in misc.c Signed-off-by: Christoph Hellwig Acked-by: Geert Uytterhoeven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/m68k/bvme6000/rtc.c | 5 +++-- arch/m68k/mvme16x/rtc.c | 4 ++-- 2 files changed, 5 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/m68k/bvme6000/rtc.c b/arch/m68k/bvme6000/rtc.c index c6b2a410bf9a..eb63ca6ed94c 100644 --- a/arch/m68k/bvme6000/rtc.c +++ b/arch/m68k/bvme6000/rtc.c @@ -14,6 +14,7 @@ #include #include #include +#include #include /* For struct rtc_time and ioctls, etc */ #include #include @@ -171,7 +172,7 @@ static struct miscdevice rtc_dev = { .fops = &rtc_fops }; -int __init rtc_DP8570A_init(void) +static int __init rtc_DP8570A_init(void) { if (!MACH_IS_BVME6000) return -ENODEV; @@ -179,4 +180,4 @@ int __init rtc_DP8570A_init(void) printk(KERN_INFO "DP8570A Real Time Clock Driver v%s\n", RTC_VERSION); return misc_register(&rtc_dev); } - +module_init(rtc_DP8570A_init); diff --git a/arch/m68k/mvme16x/rtc.c b/arch/m68k/mvme16x/rtc.c index 8a2425069088..7977eae50af2 100644 --- a/arch/m68k/mvme16x/rtc.c +++ b/arch/m68k/mvme16x/rtc.c @@ -161,7 +161,7 @@ static struct miscdevice rtc_dev= .fops = &rtc_fops }; -int __init rtc_MK48T08_init(void) +static int __init rtc_MK48T08_init(void) { if (!MACH_IS_MVME16x) return -ENODEV; @@ -169,4 +169,4 @@ int __init rtc_MK48T08_init(void) printk(KERN_INFO "MK48T08 Real Time Clock Driver v%s\n", RTC_VERSION); return misc_register(&rtc_dev); } - +module_init(rtc_MK48T08_init); -- cgit v1.2.2 From f8eeaaf4180334a8e5c3582fe62a5f8176a8c124 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Tue, 6 Sep 2005 15:17:24 -0700 Subject: [PATCH] Make the bzImage format self-terminating Signed-off-by: H. Peter Anvin Cc: Frank Sorenson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/boot/setup.S | 2 +- arch/i386/boot/tools/build.c | 4 +++- arch/x86_64/boot/setup.S | 2 +- arch/x86_64/boot/tools/build.c | 4 +++- 4 files changed, 8 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/i386/boot/setup.S b/arch/i386/boot/setup.S index 8cb420f40c58..ca668d9df164 100644 --- a/arch/i386/boot/setup.S +++ b/arch/i386/boot/setup.S @@ -82,7 +82,7 @@ start: # This is the setup header, and it must start at %cs:2 (old 0x9020:2) .ascii "HdrS" # header signature - .word 0x0203 # header version number (>= 0x0105) + .word 0x0204 # header version number (>= 0x0105) # or else old loadlin-1.5 will fail) realmode_swtch: .word 0, 0 # default_switch, SETUPSEG start_sys_seg: .word SYSSEG diff --git a/arch/i386/boot/tools/build.c b/arch/i386/boot/tools/build.c index 6835f6d47c31..05798419a6a9 100644 --- a/arch/i386/boot/tools/build.c +++ b/arch/i386/boot/tools/build.c @@ -177,7 +177,9 @@ int main(int argc, char ** argv) die("Output: seek failed"); buf[0] = (sys_size & 0xff); buf[1] = ((sys_size >> 8) & 0xff); - if (write(1, buf, 2) != 2) + buf[2] = ((sys_size >> 16) & 0xff); + buf[3] = ((sys_size >> 24) & 0xff); + if (write(1, buf, 4) != 4) die("Write of image length failed"); return 0; /* Everything is OK */ diff --git a/arch/x86_64/boot/setup.S b/arch/x86_64/boot/setup.S index ff58b2832b75..12ea0b6c52e2 100644 --- a/arch/x86_64/boot/setup.S +++ b/arch/x86_64/boot/setup.S @@ -81,7 +81,7 @@ start: # This is the setup header, and it must start at %cs:2 (old 0x9020:2) .ascii "HdrS" # header signature - .word 0x0203 # header version number (>= 0x0105) + .word 0x0204 # header version number (>= 0x0105) # or else old loadlin-1.5 will fail) realmode_swtch: .word 0, 0 # default_switch, SETUPSEG start_sys_seg: .word SYSSEG diff --git a/arch/x86_64/boot/tools/build.c b/arch/x86_64/boot/tools/build.c index 18b5bac1c428..c44f5e2ec100 100644 --- a/arch/x86_64/boot/tools/build.c +++ b/arch/x86_64/boot/tools/build.c @@ -178,7 +178,9 @@ int main(int argc, char ** argv) die("Output: seek failed"); buf[0] = (sys_size & 0xff); buf[1] = ((sys_size >> 8) & 0xff); - if (write(1, buf, 2) != 2) + buf[2] = ((sys_size >> 16) & 0xff); + buf[3] = ((sys_size >> 24) & 0xff); + if (write(1, buf, 4) != 4) die("Write of image length failed"); return 0; /* Everything is OK */ -- cgit v1.2.2 From 96d0821cacd095e25a39dfff5232a45b63ed18dd Mon Sep 17 00:00:00 2001 From: David Gibson Date: Tue, 6 Sep 2005 15:17:26 -0700 Subject: [PATCH] Fix function/macro name collision on i386 oprofile The i386 OProfile code has a function named nmi_exit(), which collides with the nmi_exit() macro in linux/hardirq.h. At the moment, we get away with it, because hardirq.h isn't included in the oprofile code. I hit this as a bug when working with a patch which (indirectly) adds a #include of hardirq.h to oprofile. Regardless, the name collision is probably not a good idea, so this patch fixes it, renaming the oprofile function to op_nmi_exit(). It also renames the nmi_init() and nmi_timer_init() functions similarly, for consistency. Signed-off-by: David Gibson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/oprofile/init.c | 12 ++++++------ arch/i386/oprofile/nmi_int.c | 4 ++-- arch/i386/oprofile/nmi_timer_int.c | 2 +- 3 files changed, 9 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/i386/oprofile/init.c b/arch/i386/oprofile/init.c index c90332de582b..5341d481d92f 100644 --- a/arch/i386/oprofile/init.c +++ b/arch/i386/oprofile/init.c @@ -15,9 +15,9 @@ * with the NMI mode driver. */ -extern int nmi_init(struct oprofile_operations * ops); -extern int nmi_timer_init(struct oprofile_operations * ops); -extern void nmi_exit(void); +extern int op_nmi_init(struct oprofile_operations * ops); +extern int op_nmi_timer_init(struct oprofile_operations * ops); +extern void op_nmi_exit(void); extern void x86_backtrace(struct pt_regs * const regs, unsigned int depth); @@ -28,11 +28,11 @@ int __init oprofile_arch_init(struct oprofile_operations * ops) ret = -ENODEV; #ifdef CONFIG_X86_LOCAL_APIC - ret = nmi_init(ops); + ret = op_nmi_init(ops); #endif #ifdef CONFIG_X86_IO_APIC if (ret < 0) - ret = nmi_timer_init(ops); + ret = op_nmi_timer_init(ops); #endif ops->backtrace = x86_backtrace; @@ -43,6 +43,6 @@ int __init oprofile_arch_init(struct oprofile_operations * ops) void oprofile_arch_exit(void) { #ifdef CONFIG_X86_LOCAL_APIC - nmi_exit(); + op_nmi_exit(); #endif } diff --git a/arch/i386/oprofile/nmi_int.c b/arch/i386/oprofile/nmi_int.c index 255e4702d185..0493e8b8ec49 100644 --- a/arch/i386/oprofile/nmi_int.c +++ b/arch/i386/oprofile/nmi_int.c @@ -355,7 +355,7 @@ static int __init ppro_init(char ** cpu_type) /* in order to get driverfs right */ static int using_nmi; -int __init nmi_init(struct oprofile_operations *ops) +int __init op_nmi_init(struct oprofile_operations *ops) { __u8 vendor = boot_cpu_data.x86_vendor; __u8 family = boot_cpu_data.x86; @@ -420,7 +420,7 @@ int __init nmi_init(struct oprofile_operations *ops) } -void nmi_exit(void) +void op_nmi_exit(void) { if (using_nmi) exit_driverfs(); diff --git a/arch/i386/oprofile/nmi_timer_int.c b/arch/i386/oprofile/nmi_timer_int.c index c58d0c14f274..ad93cdd55d63 100644 --- a/arch/i386/oprofile/nmi_timer_int.c +++ b/arch/i386/oprofile/nmi_timer_int.c @@ -40,7 +40,7 @@ static void timer_stop(void) } -int __init nmi_timer_init(struct oprofile_operations * ops) +int __init op_nmi_timer_init(struct oprofile_operations * ops) { extern int nmi_active; -- cgit v1.2.2 From 439c430e3d448b16112de3f3d92bef6ee2639d89 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 6 Sep 2005 15:17:34 -0700 Subject: [PATCH] arm26: one -g is enough for everyone The main Makefile is already adding -g to the CFLAGS if CONFIG_DEBUG_INFO=y. Not that two -g would do harm, but one works as well. Signed-off-by: Adrian Bunk Acked-by: Ian Molton Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/arm26/Makefile | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/arm26/Makefile b/arch/arm26/Makefile index ada8985530a5..e9cb8ef4f3fb 100644 --- a/arch/arm26/Makefile +++ b/arch/arm26/Makefile @@ -17,10 +17,6 @@ ifeq ($(CONFIG_FRAME_POINTER),y) CFLAGS +=-fno-omit-frame-pointer -mno-sched-prolog endif -ifeq ($(CONFIG_DEBUG_INFO),y) -CFLAGS +=-g -endif - CFLAGS_BOOT :=-mapcs-26 -mcpu=arm3 -msoft-float -Uarm CFLAGS +=-mapcs-26 -mcpu=arm3 -msoft-float -Uarm AFLAGS +=-mapcs-26 -mcpu=arm3 -msoft-float -- cgit v1.2.2 From 7f4bde9a3486cd7e70bedd2aff35b38667d50173 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 6 Sep 2005 15:17:39 -0700 Subject: [PATCH] remove the second arg of do_timer_interrupt() The second arg of do_timer_interrupt() is not used in the functions, and all callers pass NULL. Signed-off-by: Adrian Bunk Cc: Paul Mundt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/time.c | 5 ++--- arch/sh/kernel/time.c | 4 ++-- arch/sh64/kernel/time.c | 4 ++-- 3 files changed, 6 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/time.c b/arch/i386/kernel/time.c index b0c5ee2b3446..9b94d84a6c3b 100644 --- a/arch/i386/kernel/time.c +++ b/arch/i386/kernel/time.c @@ -252,8 +252,7 @@ EXPORT_SYMBOL(profile_pc); * timer_interrupt() needs to keep up the real-time clock, * as well as call the "do_timer()" routine every clocktick */ -static inline void do_timer_interrupt(int irq, void *dev_id, - struct pt_regs *regs) +static inline void do_timer_interrupt(int irq, struct pt_regs *regs) { #ifdef CONFIG_X86_IO_APIC if (timer_ack) { @@ -307,7 +306,7 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) cur_timer->mark_offset(); - do_timer_interrupt(irq, NULL, regs); + do_timer_interrupt(irq, regs); write_sequnlock(&xtime_lock); return IRQ_HANDLED; diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c index df7a9b9d4cbf..d5f5aedde0a3 100644 --- a/arch/sh/kernel/time.c +++ b/arch/sh/kernel/time.c @@ -234,7 +234,7 @@ static long last_rtc_update; * timer_interrupt() needs to keep up the real-time clock, * as well as call the "do_timer()" routine every clocktick */ -static inline void do_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +static inline void do_timer_interrupt(int irq, struct pt_regs *regs) { do_timer(regs); #ifndef CONFIG_SMP @@ -285,7 +285,7 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) * locally disabled. -arca */ write_seqlock(&xtime_lock); - do_timer_interrupt(irq, NULL, regs); + do_timer_interrupt(irq, regs); write_sequnlock(&xtime_lock); return IRQ_HANDLED; diff --git a/arch/sh64/kernel/time.c b/arch/sh64/kernel/time.c index 6c84da3efc73..926c6fc0619c 100644 --- a/arch/sh64/kernel/time.c +++ b/arch/sh64/kernel/time.c @@ -303,7 +303,7 @@ static long last_rtc_update = 0; * timer_interrupt() needs to keep up the real-time clock, * as well as call the "do_timer()" routine every clocktick */ -static inline void do_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +static inline void do_timer_interrupt(int irq, struct pt_regs *regs) { unsigned long long current_ctc; asm ("getcon cr62, %0" : "=r" (current_ctc)); @@ -361,7 +361,7 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) * locally disabled. -arca */ write_lock(&xtime_lock); - do_timer_interrupt(irq, NULL, regs); + do_timer_interrupt(irq, regs); write_unlock(&xtime_lock); return IRQ_HANDLED; -- cgit v1.2.2 From 6c231b7bab0aa6860cd9da2de8a064eddc34c146 Mon Sep 17 00:00:00 2001 From: Ravikiran G Thirumalai Date: Tue, 6 Sep 2005 15:17:45 -0700 Subject: [PATCH] Additions to .data.read_mostly section Mark variables which are usually accessed for reads with __readmostly. Signed-off-by: Alok N Kataria Signed-off-by: Shai Fultheim Signed-off-by: Ravikiran Thirumalai Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/io_apic.c | 10 +++++----- arch/i386/kernel/timers/timer_hpet.c | 2 +- arch/i386/mm/discontig.c | 8 ++++---- arch/i386/mm/init.c | 2 +- arch/x86_64/kernel/genapic.c | 2 +- arch/x86_64/kernel/io_apic.c | 10 +++++----- arch/x86_64/kernel/setup.c | 2 +- arch/x86_64/kernel/setup64.c | 2 +- arch/x86_64/kernel/smpboot.c | 10 +++++----- arch/x86_64/mm/numa.c | 6 +++--- 10 files changed, 27 insertions(+), 27 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c index 4a5940431579..0e727e6da5c9 100644 --- a/arch/i386/kernel/io_apic.c +++ b/arch/i386/kernel/io_apic.c @@ -78,7 +78,7 @@ static struct irq_pin_list { int apic, pin, next; } irq_2_pin[PIN_MAP_SIZE]; -int vector_irq[NR_VECTORS] = { [0 ... NR_VECTORS - 1] = -1}; +int vector_irq[NR_VECTORS] __read_mostly = { [0 ... NR_VECTORS - 1] = -1}; #ifdef CONFIG_PCI_MSI #define vector_to_irq(vector) \ (platform_legacy_irq(vector) ? vector : vector_irq[vector]) @@ -1119,7 +1119,7 @@ static inline int IO_APIC_irq_trigger(int irq) } /* irq_vectors is indexed by the sum of all RTEs in all I/O APICs. */ -u8 irq_vector[NR_IRQ_VECTORS] = { FIRST_DEVICE_VECTOR , 0 }; +u8 irq_vector[NR_IRQ_VECTORS] __read_mostly = { FIRST_DEVICE_VECTOR , 0 }; int assign_irq_vector(int irq) { @@ -1990,7 +1990,7 @@ static void set_ioapic_affinity_vector (unsigned int vector, * edge-triggered handler, without risking IRQ storms and other ugly * races. */ -static struct hw_interrupt_type ioapic_edge_type = { +static struct hw_interrupt_type ioapic_edge_type __read_mostly = { .typename = "IO-APIC-edge", .startup = startup_edge_ioapic, .shutdown = shutdown_edge_ioapic, @@ -2003,7 +2003,7 @@ static struct hw_interrupt_type ioapic_edge_type = { #endif }; -static struct hw_interrupt_type ioapic_level_type = { +static struct hw_interrupt_type ioapic_level_type __read_mostly = { .typename = "IO-APIC-level", .startup = startup_level_ioapic, .shutdown = shutdown_level_ioapic, @@ -2076,7 +2076,7 @@ static void ack_lapic_irq (unsigned int irq) static void end_lapic_irq (unsigned int i) { /* nothing */ } -static struct hw_interrupt_type lapic_irq_type = { +static struct hw_interrupt_type lapic_irq_type __read_mostly = { .typename = "local-APIC-edge", .startup = NULL, /* startup_irq() not used for IRQ0 */ .shutdown = NULL, /* shutdown_irq() not used for IRQ0 */ diff --git a/arch/i386/kernel/timers/timer_hpet.c b/arch/i386/kernel/timers/timer_hpet.c index 6dbb29f834e8..d973a8b681fd 100644 --- a/arch/i386/kernel/timers/timer_hpet.c +++ b/arch/i386/kernel/timers/timer_hpet.c @@ -19,7 +19,7 @@ #include static unsigned long hpet_usec_quotient __read_mostly; /* convert hpet clks to usec */ -static unsigned long tsc_hpet_quotient; /* convert tsc to hpet clks */ +static unsigned long tsc_hpet_quotient __read_mostly; /* convert tsc to hpet clks */ static unsigned long hpet_last; /* hpet counter value at last tick*/ static unsigned long last_tsc_low; /* lsb 32 bits of Time Stamp Counter */ static unsigned long last_tsc_high; /* msb 32 bits of Time Stamp Counter */ diff --git a/arch/i386/mm/discontig.c b/arch/i386/mm/discontig.c index 6711ce3f6916..244d8ec66be2 100644 --- a/arch/i386/mm/discontig.c +++ b/arch/i386/mm/discontig.c @@ -37,7 +37,7 @@ #include #include -struct pglist_data *node_data[MAX_NUMNODES]; +struct pglist_data *node_data[MAX_NUMNODES] __read_mostly; EXPORT_SYMBOL(node_data); bootmem_data_t node0_bdata; @@ -49,8 +49,8 @@ bootmem_data_t node0_bdata; * 2) node_start_pfn - the starting page frame number for a node * 3) node_end_pfn - the ending page fram number for a node */ -unsigned long node_start_pfn[MAX_NUMNODES]; -unsigned long node_end_pfn[MAX_NUMNODES]; +unsigned long node_start_pfn[MAX_NUMNODES] __read_mostly; +unsigned long node_end_pfn[MAX_NUMNODES] __read_mostly; #ifdef CONFIG_DISCONTIGMEM @@ -66,7 +66,7 @@ unsigned long node_end_pfn[MAX_NUMNODES]; * physnode_map[4-7] = 1; * physnode_map[8- ] = -1; */ -s8 physnode_map[MAX_ELEMENTS] = { [0 ... (MAX_ELEMENTS - 1)] = -1}; +s8 physnode_map[MAX_ELEMENTS] __read_mostly = { [0 ... (MAX_ELEMENTS - 1)] = -1}; EXPORT_SYMBOL(physnode_map); void memory_present(int nid, unsigned long start, unsigned long end) diff --git a/arch/i386/mm/init.c b/arch/i386/mm/init.c index 9edfc058b894..2ebaf75f732e 100644 --- a/arch/i386/mm/init.c +++ b/arch/i386/mm/init.c @@ -393,7 +393,7 @@ void zap_low_mappings (void) } static int disable_nx __initdata = 0; -u64 __supported_pte_mask = ~_PAGE_NX; +u64 __supported_pte_mask __read_mostly = ~_PAGE_NX; /* * noexec = on|off diff --git a/arch/x86_64/kernel/genapic.c b/arch/x86_64/kernel/genapic.c index 30c843a5efdd..f062aa03bab7 100644 --- a/arch/x86_64/kernel/genapic.c +++ b/arch/x86_64/kernel/genapic.c @@ -25,7 +25,7 @@ #endif /* which logical CPU number maps to which CPU (physical APIC ID) */ -u8 x86_cpu_to_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID }; +u8 x86_cpu_to_apicid[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = BAD_APICID }; EXPORT_SYMBOL(x86_cpu_to_apicid); u8 x86_cpu_to_log_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID }; diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c index 76bcc4e6979d..ba1a744e9bf0 100644 --- a/arch/x86_64/kernel/io_apic.c +++ b/arch/x86_64/kernel/io_apic.c @@ -70,7 +70,7 @@ static struct irq_pin_list { short apic, pin, next; } irq_2_pin[PIN_MAP_SIZE]; -int vector_irq[NR_VECTORS] = { [0 ... NR_VECTORS - 1] = -1}; +int vector_irq[NR_VECTORS] __read_mostly = { [0 ... NR_VECTORS - 1] = -1}; #ifdef CONFIG_PCI_MSI #define vector_to_irq(vector) \ (platform_legacy_irq(vector) ? vector : vector_irq[vector]) @@ -683,7 +683,7 @@ static inline int IO_APIC_irq_trigger(int irq) } /* irq_vectors is indexed by the sum of all RTEs in all I/O APICs. */ -u8 irq_vector[NR_IRQ_VECTORS] = { FIRST_DEVICE_VECTOR , 0 }; +u8 irq_vector[NR_IRQ_VECTORS] __read_mostly = { FIRST_DEVICE_VECTOR , 0 }; int assign_irq_vector(int irq) { @@ -1443,7 +1443,7 @@ static void set_ioapic_affinity_vector (unsigned int vector, * races. */ -static struct hw_interrupt_type ioapic_edge_type = { +static struct hw_interrupt_type ioapic_edge_type __read_mostly = { .typename = "IO-APIC-edge", .startup = startup_edge_ioapic, .shutdown = shutdown_edge_ioapic, @@ -1456,7 +1456,7 @@ static struct hw_interrupt_type ioapic_edge_type = { #endif }; -static struct hw_interrupt_type ioapic_level_type = { +static struct hw_interrupt_type ioapic_level_type __read_mostly = { .typename = "IO-APIC-level", .startup = startup_level_ioapic, .shutdown = shutdown_level_ioapic, @@ -1529,7 +1529,7 @@ static void ack_lapic_irq (unsigned int irq) static void end_lapic_irq (unsigned int i) { /* nothing */ } -static struct hw_interrupt_type lapic_irq_type = { +static struct hw_interrupt_type lapic_irq_type __read_mostly = { .typename = "local-APIC-edge", .startup = NULL, /* startup_irq() not used for IRQ0 */ .shutdown = NULL, /* shutdown_irq() not used for IRQ0 */ diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index 116a491e2961..b356f8e6adfe 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -65,7 +65,7 @@ * Machine setup.. */ -struct cpuinfo_x86 boot_cpu_data; +struct cpuinfo_x86 boot_cpu_data __read_mostly; unsigned long mmu_cr4_features; diff --git a/arch/x86_64/kernel/setup64.c b/arch/x86_64/kernel/setup64.c index 34082c1cc41e..e3ffcacc8c90 100644 --- a/arch/x86_64/kernel/setup64.c +++ b/arch/x86_64/kernel/setup64.c @@ -36,7 +36,7 @@ struct desc_ptr idt_descr = { 256 * 16, (unsigned long) idt_table }; char boot_cpu_stack[IRQSTACKSIZE] __attribute__((section(".bss.page_aligned"))); -unsigned long __supported_pte_mask = ~0UL; +unsigned long __supported_pte_mask __read_mostly = ~0UL; static int do_not_nx __initdata = 0; /* noexec=on|off diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c index fa25e39fe54d..90aeccd15190 100644 --- a/arch/x86_64/kernel/smpboot.c +++ b/arch/x86_64/kernel/smpboot.c @@ -62,13 +62,13 @@ /* Number of siblings per CPU package */ int smp_num_siblings = 1; /* Package ID of each logical CPU */ -u8 phys_proc_id[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID }; -u8 cpu_core_id[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID }; +u8 phys_proc_id[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = BAD_APICID }; +u8 cpu_core_id[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = BAD_APICID }; EXPORT_SYMBOL(phys_proc_id); EXPORT_SYMBOL(cpu_core_id); /* Bitmask of currently online CPUs */ -cpumask_t cpu_online_map; +cpumask_t cpu_online_map __read_mostly; EXPORT_SYMBOL(cpu_online_map); @@ -88,8 +88,8 @@ struct cpuinfo_x86 cpu_data[NR_CPUS] __cacheline_aligned; /* Set when the idlers are all forked */ int smp_threads_ready; -cpumask_t cpu_sibling_map[NR_CPUS] __cacheline_aligned; -cpumask_t cpu_core_map[NR_CPUS] __cacheline_aligned; +cpumask_t cpu_sibling_map[NR_CPUS] __read_mostly; +cpumask_t cpu_core_map[NR_CPUS] __read_mostly; EXPORT_SYMBOL(cpu_core_map); /* diff --git a/arch/x86_64/mm/numa.c b/arch/x86_64/mm/numa.c index 6a156f5692ae..04f7a33e144c 100644 --- a/arch/x86_64/mm/numa.c +++ b/arch/x86_64/mm/numa.c @@ -22,14 +22,14 @@ #define Dprintk(x...) #endif -struct pglist_data *node_data[MAX_NUMNODES]; +struct pglist_data *node_data[MAX_NUMNODES] __read_mostly; bootmem_data_t plat_node_bdata[MAX_NUMNODES]; int memnode_shift; u8 memnodemap[NODEMAPSIZE]; -unsigned char cpu_to_node[NR_CPUS] = { [0 ... NR_CPUS-1] = NUMA_NO_NODE }; -cpumask_t node_to_cpumask[MAX_NUMNODES]; +unsigned char cpu_to_node[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = NUMA_NO_NODE }; +cpumask_t node_to_cpumask[MAX_NUMNODES] __read_mostly; int numa_off __initdata; -- cgit v1.2.2 From b149ee2233edf08fb59b11e879a2c5941929bcb8 Mon Sep 17 00:00:00 2001 From: john stultz Date: Tue, 6 Sep 2005 15:17:46 -0700 Subject: [PATCH] NTP: ntp-helper functions This patch cleans up a commonly repeated set of changes to the NTP state variables by adding two helper inline functions: ntp_clear(): Clears the ntp state variables ntp_synced(): Returns 1 if the system is synced with a time server. This was compile tested for alpha, arm, i386, x86-64, ppc64, s390, sparc, sparc64. Signed-off-by: John Stultz Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/alpha/kernel/time.c | 7 ++----- arch/arm/kernel/time.c | 7 ++----- arch/arm26/kernel/time.c | 7 ++----- arch/cris/arch-v10/kernel/time.c | 2 +- arch/cris/kernel/time.c | 5 +---- arch/frv/kernel/time.c | 7 ++----- arch/h8300/kernel/time.c | 5 +---- arch/i386/kernel/time.c | 7 ++----- arch/m32r/kernel/time.c | 7 ++----- arch/m68k/kernel/time.c | 5 +---- arch/m68knommu/kernel/time.c | 7 ++----- arch/mips/kernel/sysirix.c | 5 +---- arch/mips/kernel/time.c | 7 ++----- arch/mips/sgi-ip27/ip27-timer.c | 2 +- arch/parisc/kernel/time.c | 5 +---- arch/ppc/kernel/time.c | 7 ++----- arch/ppc64/kernel/time.c | 7 ++----- arch/s390/kernel/time.c | 5 +---- arch/sh/kernel/time.c | 7 ++----- arch/sh64/kernel/time.c | 7 ++----- arch/sparc/kernel/pcic.c | 5 +---- arch/sparc/kernel/time.c | 7 ++----- arch/sparc64/kernel/time.c | 2 +- arch/v850/kernel/time.c | 7 ++----- arch/x86_64/kernel/time.c | 7 ++----- arch/xtensa/kernel/time.c | 7 ++----- 26 files changed, 42 insertions(+), 111 deletions(-) (limited to 'arch') diff --git a/arch/alpha/kernel/time.c b/arch/alpha/kernel/time.c index 8226c5cd788c..67be50b7d80a 100644 --- a/arch/alpha/kernel/time.c +++ b/arch/alpha/kernel/time.c @@ -149,7 +149,7 @@ irqreturn_t timer_interrupt(int irq, void *dev, struct pt_regs * regs) * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be * called as close as possible to 500 ms before the new second starts. */ - if ((time_status & STA_UNSYNC) == 0 + if (ntp_synced() && xtime.tv_sec > state.last_rtc_update + 660 && xtime.tv_nsec >= 500000 - ((unsigned) TICK_SIZE) / 2 && xtime.tv_nsec <= 500000 + ((unsigned) TICK_SIZE) / 2) { @@ -502,10 +502,7 @@ do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index 8880482dcbff..69449a818dcc 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -102,7 +102,7 @@ static unsigned long next_rtc_update; */ static inline void do_set_rtc(void) { - if (time_status & STA_UNSYNC || set_rtc == NULL) + if (!ntp_synced() || set_rtc == NULL) return; if (next_rtc_update && @@ -292,10 +292,7 @@ int do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); return 0; diff --git a/arch/arm26/kernel/time.c b/arch/arm26/kernel/time.c index 549a6b2e177e..e66aedd02fad 100644 --- a/arch/arm26/kernel/time.c +++ b/arch/arm26/kernel/time.c @@ -114,7 +114,7 @@ static unsigned long next_rtc_update; */ static inline void do_set_rtc(void) { - if (time_status & STA_UNSYNC || set_rtc == NULL) + if (!ntp_synced() || set_rtc == NULL) return; //FIXME - timespec.tv_sec is a time_t not unsigned long @@ -189,10 +189,7 @@ int do_settimeofday(struct timespec *tv) xtime.tv_sec = tv->tv_sec; xtime.tv_nsec = tv->tv_nsec; - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); return 0; diff --git a/arch/cris/arch-v10/kernel/time.c b/arch/cris/arch-v10/kernel/time.c index 6b7b4e0802e3..dc3dfe9b4a1a 100644 --- a/arch/cris/arch-v10/kernel/time.c +++ b/arch/cris/arch-v10/kernel/time.c @@ -240,7 +240,7 @@ timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) * The division here is not time critical since it will run once in * 11 minutes */ - if ((time_status & STA_UNSYNC) == 0 && + if (ntp_synced() && xtime.tv_sec > last_rtc_update + 660 && (xtime.tv_nsec / 1000) >= 500000 - (tick_nsec / 1000) / 2 && (xtime.tv_nsec / 1000) <= 500000 + (tick_nsec / 1000) / 2) { diff --git a/arch/cris/kernel/time.c b/arch/cris/kernel/time.c index fa2d4323da25..a2d99b4aedcd 100644 --- a/arch/cris/kernel/time.c +++ b/arch/cris/kernel/time.c @@ -114,10 +114,7 @@ int do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); return 0; diff --git a/arch/frv/kernel/time.c b/arch/frv/kernel/time.c index 075db6644694..8d6558b00e44 100644 --- a/arch/frv/kernel/time.c +++ b/arch/frv/kernel/time.c @@ -85,7 +85,7 @@ static irqreturn_t timer_interrupt(int irq, void *dummy, struct pt_regs * regs) * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be * called as close as possible to 500 ms before the new second starts. */ - if ((time_status & STA_UNSYNC) == 0 && + if (ntp_synced() && xtime.tv_sec > last_rtc_update + 660 && (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2 @@ -216,10 +216,7 @@ int do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); return 0; diff --git a/arch/h8300/kernel/time.c b/arch/h8300/kernel/time.c index 8a600218334d..af8c5d2057dd 100644 --- a/arch/h8300/kernel/time.c +++ b/arch/h8300/kernel/time.c @@ -116,10 +116,7 @@ int do_settimeofday(struct timespec *tv) xtime.tv_sec = tv->tv_sec; xtime.tv_nsec = tv->tv_nsec; - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); return 0; diff --git a/arch/i386/kernel/time.c b/arch/i386/kernel/time.c index 9b94d84a6c3b..eefea7c55008 100644 --- a/arch/i386/kernel/time.c +++ b/arch/i386/kernel/time.c @@ -194,10 +194,7 @@ int do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); return 0; @@ -347,7 +344,7 @@ static void sync_cmos_clock(unsigned long dummy) * This code is run on a timer. If the clock is set, that timer * may not expire at the correct time. Thus, we adjust... */ - if ((time_status & STA_UNSYNC) != 0) + if (!ntp_synced()) /* * Not synced, exit, do not restart a timer (if one is * running, let it run out). diff --git a/arch/m32r/kernel/time.c b/arch/m32r/kernel/time.c index 8a2b77bc5749..539c562cd54d 100644 --- a/arch/m32r/kernel/time.c +++ b/arch/m32r/kernel/time.c @@ -171,10 +171,7 @@ int do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); @@ -221,7 +218,7 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) * called as close as possible to 500 ms before the new second starts. */ write_seqlock(&xtime_lock); - if ((time_status & STA_UNSYNC) == 0 + if (ntp_synced() && xtime.tv_sec > last_rtc_update + 660 && (xtime.tv_nsec / 1000) >= 500000 - ((unsigned)TICK_SIZE) / 2 && (xtime.tv_nsec / 1000) <= 500000 + ((unsigned)TICK_SIZE) / 2) diff --git a/arch/m68k/kernel/time.c b/arch/m68k/kernel/time.c index e47e19588525..4ec95e3cb874 100644 --- a/arch/m68k/kernel/time.c +++ b/arch/m68k/kernel/time.c @@ -166,10 +166,7 @@ int do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); return 0; diff --git a/arch/m68knommu/kernel/time.c b/arch/m68knommu/kernel/time.c index 5c3ca671627c..b17c1ecba966 100644 --- a/arch/m68knommu/kernel/time.c +++ b/arch/m68knommu/kernel/time.c @@ -68,7 +68,7 @@ static irqreturn_t timer_interrupt(int irq, void *dummy, struct pt_regs * regs) * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be * called as close as possible to 500 ms before the new second starts. */ - if ((time_status & STA_UNSYNC) == 0 && + if (ntp_synced() && xtime.tv_sec > last_rtc_update + 660 && (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) { @@ -178,10 +178,7 @@ int do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); return 0; diff --git a/arch/mips/kernel/sysirix.c b/arch/mips/kernel/sysirix.c index f3bf0e43b8bb..b46595462717 100644 --- a/arch/mips/kernel/sysirix.c +++ b/arch/mips/kernel/sysirix.c @@ -632,10 +632,7 @@ asmlinkage int irix_stime(int value) write_seqlock_irq(&xtime_lock); xtime.tv_sec = value; xtime.tv_nsec = 0; - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); return 0; diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c index 648c82292ed6..0dd0df7a3b04 100644 --- a/arch/mips/kernel/time.c +++ b/arch/mips/kernel/time.c @@ -223,10 +223,7 @@ int do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); @@ -442,7 +439,7 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) * called as close as possible to 500 ms before the new second starts. */ write_seqlock(&xtime_lock); - if ((time_status & STA_UNSYNC) == 0 && + if (ntp_synced() && xtime.tv_sec > last_rtc_update + 660 && (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) { diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c index 8c1b96fffa76..cddf1cedf007 100644 --- a/arch/mips/sgi-ip27/ip27-timer.c +++ b/arch/mips/sgi-ip27/ip27-timer.c @@ -118,7 +118,7 @@ again: * RTC clock accordingly every ~11 minutes. Set_rtc_mmss() has to be * called as close as possible to when a second starts. */ - if ((time_status & STA_UNSYNC) == 0 && + if (ntp_synced() && xtime.tv_sec > last_rtc_update + 660 && (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) { diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c index 6cf7407344ba..7ff67f8e9f8c 100644 --- a/arch/parisc/kernel/time.c +++ b/arch/parisc/kernel/time.c @@ -188,10 +188,7 @@ do_settimeofday (struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); } write_sequnlock_irq(&xtime_lock); clock_was_set(); diff --git a/arch/ppc/kernel/time.c b/arch/ppc/kernel/time.c index bf4ddca5e853..a3c5281a5d2d 100644 --- a/arch/ppc/kernel/time.c +++ b/arch/ppc/kernel/time.c @@ -169,7 +169,7 @@ void timer_interrupt(struct pt_regs * regs) * We should have an rtc call that only sets the minutes and * seconds like on Intel to avoid problems with non UTC clocks. */ - if ( ppc_md.set_rtc_time && (time_status & STA_UNSYNC) == 0 && + if ( ppc_md.set_rtc_time && ntp_synced() && xtime.tv_sec - last_rtc_update >= 659 && abs((xtime.tv_nsec / 1000) - (1000000-1000000/HZ)) < 500000/HZ && jiffies - wall_jiffies == 1) { @@ -271,10 +271,7 @@ int do_settimeofday(struct timespec *tv) */ last_rtc_update = new_sec - 658; - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irqrestore(&xtime_lock, flags); clock_was_set(); return 0; diff --git a/arch/ppc64/kernel/time.c b/arch/ppc64/kernel/time.c index 91ef95ccda4f..9939c206afa4 100644 --- a/arch/ppc64/kernel/time.c +++ b/arch/ppc64/kernel/time.c @@ -128,7 +128,7 @@ static __inline__ void timer_check_rtc(void) * We should have an rtc call that only sets the minutes and * seconds like on Intel to avoid problems with non UTC clocks. */ - if ( (time_status & STA_UNSYNC) == 0 && + if (ntp_synced() && xtime.tv_sec - last_rtc_update >= 659 && abs((xtime.tv_nsec/1000) - (1000000-1000000/HZ)) < 500000/HZ && jiffies - wall_jiffies == 1) { @@ -435,10 +435,7 @@ int do_settimeofday(struct timespec *tv) */ last_rtc_update = new_sec - 658; - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); delta_xsec = mulhdu( (tb_last_stamp-do_gtod.varp->tb_orig_stamp), do_gtod.varp->tb_to_xs ); diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index 8ca485676780..2fd75da15495 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -139,10 +139,7 @@ int do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); return 0; diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c index d5f5aedde0a3..02ca69918d7c 100644 --- a/arch/sh/kernel/time.c +++ b/arch/sh/kernel/time.c @@ -215,10 +215,7 @@ int do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); @@ -252,7 +249,7 @@ static inline void do_timer_interrupt(int irq, struct pt_regs *regs) * RTC clock accordingly every ~11 minutes. Set_rtc_mmss() has to be * called as close as possible to 500 ms before the new second starts. */ - if ((time_status & STA_UNSYNC) == 0 && + if (ntp_synced() && xtime.tv_sec > last_rtc_update + 660 && (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) { diff --git a/arch/sh64/kernel/time.c b/arch/sh64/kernel/time.c index 926c6fc0619c..f4a62a10053c 100644 --- a/arch/sh64/kernel/time.c +++ b/arch/sh64/kernel/time.c @@ -247,10 +247,7 @@ int do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); @@ -328,7 +325,7 @@ static inline void do_timer_interrupt(int irq, struct pt_regs *regs) * RTC clock accordingly every ~11 minutes. Set_rtc_mmss() has to be * called as close as possible to 500 ms before the new second starts. */ - if ((time_status & STA_UNSYNC) == 0 && + if (ntp_synced() && xtime.tv_sec > last_rtc_update + 660 && (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) { diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c index 597d3ff6ad68..36a40697b8d6 100644 --- a/arch/sparc/kernel/pcic.c +++ b/arch/sparc/kernel/pcic.c @@ -840,10 +840,7 @@ static int pci_do_settimeofday(struct timespec *tv) xtime.tv_sec = tv->tv_sec; xtime.tv_nsec = tv->tv_nsec; - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); return 0; } diff --git a/arch/sparc/kernel/time.c b/arch/sparc/kernel/time.c index 3b759aefc170..bc015e980341 100644 --- a/arch/sparc/kernel/time.c +++ b/arch/sparc/kernel/time.c @@ -139,7 +139,7 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs * regs) /* Determine when to update the Mostek clock. */ - if ((time_status & STA_UNSYNC) == 0 && + if (ntp_synced() && xtime.tv_sec > last_rtc_update + 660 && (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) { @@ -554,10 +554,7 @@ static int sbus_do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); return 0; } diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c index 362b9c26871b..3f08a32f51a1 100644 --- a/arch/sparc64/kernel/time.c +++ b/arch/sparc64/kernel/time.c @@ -449,7 +449,7 @@ static inline void timer_check_rtc(void) static long last_rtc_update; /* Determine when to update the Mostek clock. */ - if ((time_status & STA_UNSYNC) == 0 && + if (ntp_synced() && xtime.tv_sec > last_rtc_update + 660 && (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) { diff --git a/arch/v850/kernel/time.c b/arch/v850/kernel/time.c index f722a268238a..ea3fd8844ff0 100644 --- a/arch/v850/kernel/time.c +++ b/arch/v850/kernel/time.c @@ -66,7 +66,7 @@ static irqreturn_t timer_interrupt (int irq, void *dummy, struct pt_regs *regs) * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be * called as close as possible to 500 ms before the new second starts. */ - if ((time_status & STA_UNSYNC) == 0 && + if (ntp_synced() && xtime.tv_sec > last_rtc_update + 660 && (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) { @@ -169,10 +169,7 @@ int do_settimeofday(struct timespec *tv) xtime.tv_sec = tv->tv_sec; xtime.tv_nsec = tv->tv_nsec; - time_adjust = 0; /* stop active adjtime () */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq (&xtime_lock); clock_was_set(); diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c index 2b5d9da912a2..7b6abe058253 100644 --- a/arch/x86_64/kernel/time.c +++ b/arch/x86_64/kernel/time.c @@ -176,10 +176,7 @@ int do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); clock_was_set(); @@ -471,7 +468,7 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) * off) isn't likely to go away much sooner anyway. */ - if ((~time_status & STA_UNSYNC) && xtime.tv_sec > rtc_update && + if (ntp_synced() && xtime.tv_sec > rtc_update && abs(xtime.tv_nsec - 500000000) <= tick_nsec / 2) { set_rtc_mmss(xtime.tv_sec); rtc_update = xtime.tv_sec + 660; diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c index e07287db5a40..1ac7d5ce7456 100644 --- a/arch/xtensa/kernel/time.c +++ b/arch/xtensa/kernel/time.c @@ -122,10 +122,7 @@ int do_settimeofday(struct timespec *tv) set_normalized_timespec(&xtime, sec, nsec); set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - time_adjust = 0; /* stop active adjtime() */ - time_status |= STA_UNSYNC; - time_maxerror = NTP_PHASE_LIMIT; - time_esterror = NTP_PHASE_LIMIT; + ntp_clear(); write_sequnlock_irq(&xtime_lock); return 0; } @@ -184,7 +181,7 @@ again: next += CCOUNT_PER_JIFFY; do_timer (regs); /* Linux handler in kernel/timer.c */ - if ((time_status & STA_UNSYNC) == 0 && + if (ntp_synced() && xtime.tv_sec - last_rtc_update >= 659 && abs((xtime.tv_nsec/1000)-(1000000-1000000/HZ))<5000000/HZ && jiffies - wall_jiffies == 1) { -- cgit v1.2.2 From 97de50c0add1e8f3b4e764c66a13c07235fee631 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Tue, 6 Sep 2005 15:17:49 -0700 Subject: [PATCH] remove verify_area(): remove verify_area() from various uaccess.h headers Remove the deprecated (and unused) verify_area() from various uaccess.h headers. Signed-off-by: Jesper Juhl Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/include/um_uaccess.h | 7 ------- 1 file changed, 7 deletions(-) (limited to 'arch') diff --git a/arch/um/include/um_uaccess.h b/arch/um/include/um_uaccess.h index 6e348cb6de24..84c0868cd561 100644 --- a/arch/um/include/um_uaccess.h +++ b/arch/um/include/um_uaccess.h @@ -20,13 +20,6 @@ #define access_ok(type, addr, size) \ CHOOSE_MODE_PROC(access_ok_tt, access_ok_skas, type, addr, size) -/* this function will go away soon - use access_ok() instead */ -static inline int __deprecated verify_area(int type, const void __user *addr, unsigned long size) -{ - return (CHOOSE_MODE_PROC(verify_area_tt, verify_area_skas, type, addr, - size)); -} - static inline int copy_from_user(void *to, const void __user *from, int n) { return(CHOOSE_MODE_PROC(copy_from_user_tt, copy_from_user_skas, to, -- cgit v1.2.2 From f68f447e8389de9a62e3e80c3c5823cce484c2e5 Mon Sep 17 00:00:00 2001 From: John Hawkes Date: Tue, 6 Sep 2005 15:18:06 -0700 Subject: [PATCH] ia64 cpuset + build_sched_domains() mangles structures I've already sent this to the maintainers, and this is now being sent to a larger community audience. I have fixed a problem with the ia64 version of build_sched_domains(), but a similar fix still needs to be made to the generic build_sched_domains() in kernel/sched.c. The "dynamic sched domains" functionality has recently been merged into 2.6.13-rcN that sees the dynamic declaration of a cpu-exclusive (a.k.a. "isolated") cpuset and rebuilds the CPU Scheduler sched domains and sched groups to separate away the CPUs in this cpu-exclusive cpuset from the remainder of the non-isolated CPUs. This allows the non-isolated CPUs to completely ignore the isolated CPUs when doing load-balancing. Unfortunately, build_sched_domains() expects that a sched domain will include all the CPUs of each node in the domain, i.e., that no node will belong in both an isolated cpuset and a non-isolated cpuset. Declaring a cpuset that violates this presumption will produce flawed data structures and will oops the kernel. To trigger the problem (on a NUMA system with >1 CPUs per node): cd /dev/cpuset mkdir newcpuset cd newcpuset echo 0 >cpus echo 0 >mems echo 1 >cpu_exclusive I have fixed this shortcoming for ia64 NUMA (with multiple CPUs per node). A similar shortcoming exists in the generic build_sched_domains() (in kernel/sched.c) for NUMA, and that needs to be fixed also. The fix involves dynamically allocating sched_group_nodes[] and sched_group_allnodes[] for each invocation of build_sched_domains(), rather than using global arrays for these structures. Care must be taken to remember kmalloc() addresses so that arch_destroy_sched_domains() can properly kfree() the new dynamic structures. Signed-off-by: John Hawkes Cc: Nick Piggin Cc: Ingo Molnar Cc: "Luck, Tony" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ia64/kernel/domain.c | 90 ++++++++++++++++++++++++++++++++++++----------- 1 file changed, 69 insertions(+), 21 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/domain.c b/arch/ia64/kernel/domain.c index bbb8efe126b7..e907109983f1 100644 --- a/arch/ia64/kernel/domain.c +++ b/arch/ia64/kernel/domain.c @@ -120,10 +120,10 @@ static int cpu_to_phys_group(int cpu) * gets dynamically allocated. */ static DEFINE_PER_CPU(struct sched_domain, node_domains); -static struct sched_group *sched_group_nodes[MAX_NUMNODES]; +static struct sched_group **sched_group_nodes_bycpu[NR_CPUS]; static DEFINE_PER_CPU(struct sched_domain, allnodes_domains); -static struct sched_group sched_group_allnodes[MAX_NUMNODES]; +static struct sched_group *sched_group_allnodes_bycpu[NR_CPUS]; static int cpu_to_allnodes_group(int cpu) { @@ -138,6 +138,21 @@ static int cpu_to_allnodes_group(int cpu) void build_sched_domains(const cpumask_t *cpu_map) { int i; +#ifdef CONFIG_NUMA + struct sched_group **sched_group_nodes = NULL; + struct sched_group *sched_group_allnodes = NULL; + + /* + * Allocate the per-node list of sched groups + */ + sched_group_nodes = kmalloc(sizeof(struct sched_group*)*MAX_NUMNODES, + GFP_ATOMIC); + if (!sched_group_nodes) { + printk(KERN_WARNING "Can not alloc sched group node list\n"); + return; + } + sched_group_nodes_bycpu[first_cpu(*cpu_map)] = sched_group_nodes; +#endif /* * Set up domains for cpus specified by the cpu_map. @@ -150,8 +165,21 @@ void build_sched_domains(const cpumask_t *cpu_map) cpus_and(nodemask, nodemask, *cpu_map); #ifdef CONFIG_NUMA - if (num_online_cpus() + if (cpus_weight(*cpu_map) > SD_NODES_PER_DOMAIN*cpus_weight(nodemask)) { + if (!sched_group_allnodes) { + sched_group_allnodes + = kmalloc(sizeof(struct sched_group) + * MAX_NUMNODES, + GFP_KERNEL); + if (!sched_group_allnodes) { + printk(KERN_WARNING + "Can not alloc allnodes sched group\n"); + break; + } + sched_group_allnodes_bycpu[i] + = sched_group_allnodes; + } sd = &per_cpu(allnodes_domains, i); *sd = SD_ALLNODES_INIT; sd->span = *cpu_map; @@ -214,8 +242,9 @@ void build_sched_domains(const cpumask_t *cpu_map) } #ifdef CONFIG_NUMA - init_sched_build_groups(sched_group_allnodes, *cpu_map, - &cpu_to_allnodes_group); + if (sched_group_allnodes) + init_sched_build_groups(sched_group_allnodes, *cpu_map, + &cpu_to_allnodes_group); for (i = 0; i < MAX_NUMNODES; i++) { /* Set up node groups */ @@ -226,8 +255,10 @@ void build_sched_domains(const cpumask_t *cpu_map) int j; cpus_and(nodemask, nodemask, *cpu_map); - if (cpus_empty(nodemask)) + if (cpus_empty(nodemask)) { + sched_group_nodes[i] = NULL; continue; + } domainspan = sched_domain_node_span(i); cpus_and(domainspan, domainspan, *cpu_map); @@ -372,25 +403,42 @@ void arch_destroy_sched_domains(const cpumask_t *cpu_map) { #ifdef CONFIG_NUMA int i; - for (i = 0; i < MAX_NUMNODES; i++) { - cpumask_t nodemask = node_to_cpumask(i); - struct sched_group *oldsg, *sg = sched_group_nodes[i]; + int cpu; - cpus_and(nodemask, nodemask, *cpu_map); - if (cpus_empty(nodemask)) - continue; + for_each_cpu_mask(cpu, *cpu_map) { + struct sched_group *sched_group_allnodes + = sched_group_allnodes_bycpu[cpu]; + struct sched_group **sched_group_nodes + = sched_group_nodes_bycpu[cpu]; - if (sg == NULL) + if (sched_group_allnodes) { + kfree(sched_group_allnodes); + sched_group_allnodes_bycpu[cpu] = NULL; + } + + if (!sched_group_nodes) continue; - sg = sg->next; + + for (i = 0; i < MAX_NUMNODES; i++) { + cpumask_t nodemask = node_to_cpumask(i); + struct sched_group *oldsg, *sg = sched_group_nodes[i]; + + cpus_and(nodemask, nodemask, *cpu_map); + if (cpus_empty(nodemask)) + continue; + + if (sg == NULL) + continue; + sg = sg->next; next_sg: - oldsg = sg; - sg = sg->next; - kfree(oldsg); - if (oldsg != sched_group_nodes[i]) - goto next_sg; - sched_group_nodes[i] = NULL; + oldsg = sg; + sg = sg->next; + kfree(oldsg); + if (oldsg != sched_group_nodes[i]) + goto next_sg; + } + kfree(sched_group_nodes); + sched_group_nodes_bycpu[cpu] = NULL; } #endif } - -- cgit v1.2.2 From 9c1cfda20a508b181bdda8c0045f7c0c333880a5 Mon Sep 17 00:00:00 2001 From: John Hawkes Date: Tue, 6 Sep 2005 15:18:14 -0700 Subject: [PATCH] cpusets: Move the ia64 domain setup code to the generic code Signed-off-by: John Hawkes Signed-off-by: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ia64/kernel/Makefile | 2 +- arch/ia64/kernel/domain.c | 444 ---------------------------------------------- 2 files changed, 1 insertion(+), 445 deletions(-) delete mode 100644 arch/ia64/kernel/domain.c (limited to 'arch') diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile index b242594be55b..307514f7a282 100644 --- a/arch/ia64/kernel/Makefile +++ b/arch/ia64/kernel/Makefile @@ -16,7 +16,7 @@ obj-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += acpi-ext.o obj-$(CONFIG_IA64_PALINFO) += palinfo.o obj-$(CONFIG_IOSAPIC) += iosapic.o obj-$(CONFIG_MODULES) += module.o -obj-$(CONFIG_SMP) += smp.o smpboot.o domain.o +obj-$(CONFIG_SMP) += smp.o smpboot.o obj-$(CONFIG_NUMA) += numa.o obj-$(CONFIG_PERFMON) += perfmon_default_smpl.o obj-$(CONFIG_IA64_CYCLONE) += cyclone.o diff --git a/arch/ia64/kernel/domain.c b/arch/ia64/kernel/domain.c deleted file mode 100644 index e907109983f1..000000000000 --- a/arch/ia64/kernel/domain.c +++ /dev/null @@ -1,444 +0,0 @@ -/* - * arch/ia64/kernel/domain.c - * Architecture specific sched-domains builder. - * - * Copyright (C) 2004 Jesse Barnes - * Copyright (C) 2004 Silicon Graphics, Inc. - */ - -#include -#include -#include -#include -#include -#include -#include - -#define SD_NODES_PER_DOMAIN 16 - -#ifdef CONFIG_NUMA -/** - * find_next_best_node - find the next node to include in a sched_domain - * @node: node whose sched_domain we're building - * @used_nodes: nodes already in the sched_domain - * - * Find the next node to include in a given scheduling domain. Simply - * finds the closest node not already in the @used_nodes map. - * - * Should use nodemask_t. - */ -static int find_next_best_node(int node, unsigned long *used_nodes) -{ - int i, n, val, min_val, best_node = 0; - - min_val = INT_MAX; - - for (i = 0; i < MAX_NUMNODES; i++) { - /* Start at @node */ - n = (node + i) % MAX_NUMNODES; - - if (!nr_cpus_node(n)) - continue; - - /* Skip already used nodes */ - if (test_bit(n, used_nodes)) - continue; - - /* Simple min distance search */ - val = node_distance(node, n); - - if (val < min_val) { - min_val = val; - best_node = n; - } - } - - set_bit(best_node, used_nodes); - return best_node; -} - -/** - * sched_domain_node_span - get a cpumask for a node's sched_domain - * @node: node whose cpumask we're constructing - * @size: number of nodes to include in this span - * - * Given a node, construct a good cpumask for its sched_domain to span. It - * should be one that prevents unnecessary balancing, but also spreads tasks - * out optimally. - */ -static cpumask_t sched_domain_node_span(int node) -{ - int i; - cpumask_t span, nodemask; - DECLARE_BITMAP(used_nodes, MAX_NUMNODES); - - cpus_clear(span); - bitmap_zero(used_nodes, MAX_NUMNODES); - - nodemask = node_to_cpumask(node); - cpus_or(span, span, nodemask); - set_bit(node, used_nodes); - - for (i = 1; i < SD_NODES_PER_DOMAIN; i++) { - int next_node = find_next_best_node(node, used_nodes); - nodemask = node_to_cpumask(next_node); - cpus_or(span, span, nodemask); - } - - return span; -} -#endif - -/* - * At the moment, CONFIG_SCHED_SMT is never defined, but leave it in so we - * can switch it on easily if needed. - */ -#ifdef CONFIG_SCHED_SMT -static DEFINE_PER_CPU(struct sched_domain, cpu_domains); -static struct sched_group sched_group_cpus[NR_CPUS]; -static int cpu_to_cpu_group(int cpu) -{ - return cpu; -} -#endif - -static DEFINE_PER_CPU(struct sched_domain, phys_domains); -static struct sched_group sched_group_phys[NR_CPUS]; -static int cpu_to_phys_group(int cpu) -{ -#ifdef CONFIG_SCHED_SMT - return first_cpu(cpu_sibling_map[cpu]); -#else - return cpu; -#endif -} - -#ifdef CONFIG_NUMA -/* - * The init_sched_build_groups can't handle what we want to do with node - * groups, so roll our own. Now each node has its own list of groups which - * gets dynamically allocated. - */ -static DEFINE_PER_CPU(struct sched_domain, node_domains); -static struct sched_group **sched_group_nodes_bycpu[NR_CPUS]; - -static DEFINE_PER_CPU(struct sched_domain, allnodes_domains); -static struct sched_group *sched_group_allnodes_bycpu[NR_CPUS]; - -static int cpu_to_allnodes_group(int cpu) -{ - return cpu_to_node(cpu); -} -#endif - -/* - * Build sched domains for a given set of cpus and attach the sched domains - * to the individual cpus - */ -void build_sched_domains(const cpumask_t *cpu_map) -{ - int i; -#ifdef CONFIG_NUMA - struct sched_group **sched_group_nodes = NULL; - struct sched_group *sched_group_allnodes = NULL; - - /* - * Allocate the per-node list of sched groups - */ - sched_group_nodes = kmalloc(sizeof(struct sched_group*)*MAX_NUMNODES, - GFP_ATOMIC); - if (!sched_group_nodes) { - printk(KERN_WARNING "Can not alloc sched group node list\n"); - return; - } - sched_group_nodes_bycpu[first_cpu(*cpu_map)] = sched_group_nodes; -#endif - - /* - * Set up domains for cpus specified by the cpu_map. - */ - for_each_cpu_mask(i, *cpu_map) { - int group; - struct sched_domain *sd = NULL, *p; - cpumask_t nodemask = node_to_cpumask(cpu_to_node(i)); - - cpus_and(nodemask, nodemask, *cpu_map); - -#ifdef CONFIG_NUMA - if (cpus_weight(*cpu_map) - > SD_NODES_PER_DOMAIN*cpus_weight(nodemask)) { - if (!sched_group_allnodes) { - sched_group_allnodes - = kmalloc(sizeof(struct sched_group) - * MAX_NUMNODES, - GFP_KERNEL); - if (!sched_group_allnodes) { - printk(KERN_WARNING - "Can not alloc allnodes sched group\n"); - break; - } - sched_group_allnodes_bycpu[i] - = sched_group_allnodes; - } - sd = &per_cpu(allnodes_domains, i); - *sd = SD_ALLNODES_INIT; - sd->span = *cpu_map; - group = cpu_to_allnodes_group(i); - sd->groups = &sched_group_allnodes[group]; - p = sd; - } else - p = NULL; - - sd = &per_cpu(node_domains, i); - *sd = SD_NODE_INIT; - sd->span = sched_domain_node_span(cpu_to_node(i)); - sd->parent = p; - cpus_and(sd->span, sd->span, *cpu_map); -#endif - - p = sd; - sd = &per_cpu(phys_domains, i); - group = cpu_to_phys_group(i); - *sd = SD_CPU_INIT; - sd->span = nodemask; - sd->parent = p; - sd->groups = &sched_group_phys[group]; - -#ifdef CONFIG_SCHED_SMT - p = sd; - sd = &per_cpu(cpu_domains, i); - group = cpu_to_cpu_group(i); - *sd = SD_SIBLING_INIT; - sd->span = cpu_sibling_map[i]; - cpus_and(sd->span, sd->span, *cpu_map); - sd->parent = p; - sd->groups = &sched_group_cpus[group]; -#endif - } - -#ifdef CONFIG_SCHED_SMT - /* Set up CPU (sibling) groups */ - for_each_cpu_mask(i, *cpu_map) { - cpumask_t this_sibling_map = cpu_sibling_map[i]; - cpus_and(this_sibling_map, this_sibling_map, *cpu_map); - if (i != first_cpu(this_sibling_map)) - continue; - - init_sched_build_groups(sched_group_cpus, this_sibling_map, - &cpu_to_cpu_group); - } -#endif - - /* Set up physical groups */ - for (i = 0; i < MAX_NUMNODES; i++) { - cpumask_t nodemask = node_to_cpumask(i); - - cpus_and(nodemask, nodemask, *cpu_map); - if (cpus_empty(nodemask)) - continue; - - init_sched_build_groups(sched_group_phys, nodemask, - &cpu_to_phys_group); - } - -#ifdef CONFIG_NUMA - if (sched_group_allnodes) - init_sched_build_groups(sched_group_allnodes, *cpu_map, - &cpu_to_allnodes_group); - - for (i = 0; i < MAX_NUMNODES; i++) { - /* Set up node groups */ - struct sched_group *sg, *prev; - cpumask_t nodemask = node_to_cpumask(i); - cpumask_t domainspan; - cpumask_t covered = CPU_MASK_NONE; - int j; - - cpus_and(nodemask, nodemask, *cpu_map); - if (cpus_empty(nodemask)) { - sched_group_nodes[i] = NULL; - continue; - } - - domainspan = sched_domain_node_span(i); - cpus_and(domainspan, domainspan, *cpu_map); - - sg = kmalloc(sizeof(struct sched_group), GFP_KERNEL); - sched_group_nodes[i] = sg; - for_each_cpu_mask(j, nodemask) { - struct sched_domain *sd; - sd = &per_cpu(node_domains, j); - sd->groups = sg; - if (sd->groups == NULL) { - /* Turn off balancing if we have no groups */ - sd->flags = 0; - } - } - if (!sg) { - printk(KERN_WARNING - "Can not alloc domain group for node %d\n", i); - continue; - } - sg->cpu_power = 0; - sg->cpumask = nodemask; - cpus_or(covered, covered, nodemask); - prev = sg; - - for (j = 0; j < MAX_NUMNODES; j++) { - cpumask_t tmp, notcovered; - int n = (i + j) % MAX_NUMNODES; - - cpus_complement(notcovered, covered); - cpus_and(tmp, notcovered, *cpu_map); - cpus_and(tmp, tmp, domainspan); - if (cpus_empty(tmp)) - break; - - nodemask = node_to_cpumask(n); - cpus_and(tmp, tmp, nodemask); - if (cpus_empty(tmp)) - continue; - - sg = kmalloc(sizeof(struct sched_group), GFP_KERNEL); - if (!sg) { - printk(KERN_WARNING - "Can not alloc domain group for node %d\n", j); - break; - } - sg->cpu_power = 0; - sg->cpumask = tmp; - cpus_or(covered, covered, tmp); - prev->next = sg; - prev = sg; - } - prev->next = sched_group_nodes[i]; - } -#endif - - /* Calculate CPU power for physical packages and nodes */ - for_each_cpu_mask(i, *cpu_map) { - int power; - struct sched_domain *sd; -#ifdef CONFIG_SCHED_SMT - sd = &per_cpu(cpu_domains, i); - power = SCHED_LOAD_SCALE; - sd->groups->cpu_power = power; -#endif - - sd = &per_cpu(phys_domains, i); - power = SCHED_LOAD_SCALE + SCHED_LOAD_SCALE * - (cpus_weight(sd->groups->cpumask)-1) / 10; - sd->groups->cpu_power = power; - -#ifdef CONFIG_NUMA - sd = &per_cpu(allnodes_domains, i); - if (sd->groups) { - power = SCHED_LOAD_SCALE + SCHED_LOAD_SCALE * - (cpus_weight(sd->groups->cpumask)-1) / 10; - sd->groups->cpu_power = power; - } -#endif - } - -#ifdef CONFIG_NUMA - for (i = 0; i < MAX_NUMNODES; i++) { - struct sched_group *sg = sched_group_nodes[i]; - int j; - - if (sg == NULL) - continue; -next_sg: - for_each_cpu_mask(j, sg->cpumask) { - struct sched_domain *sd; - int power; - - sd = &per_cpu(phys_domains, j); - if (j != first_cpu(sd->groups->cpumask)) { - /* - * Only add "power" once for each - * physical package. - */ - continue; - } - power = SCHED_LOAD_SCALE + SCHED_LOAD_SCALE * - (cpus_weight(sd->groups->cpumask)-1) / 10; - - sg->cpu_power += power; - } - sg = sg->next; - if (sg != sched_group_nodes[i]) - goto next_sg; - } -#endif - - /* Attach the domains */ - for_each_cpu_mask(i, *cpu_map) { - struct sched_domain *sd; -#ifdef CONFIG_SCHED_SMT - sd = &per_cpu(cpu_domains, i); -#else - sd = &per_cpu(phys_domains, i); -#endif - cpu_attach_domain(sd, i); - } -} -/* - * Set up scheduler domains and groups. Callers must hold the hotplug lock. - */ -void arch_init_sched_domains(const cpumask_t *cpu_map) -{ - cpumask_t cpu_default_map; - - /* - * Setup mask for cpus without special case scheduling requirements. - * For now this just excludes isolated cpus, but could be used to - * exclude other special cases in the future. - */ - cpus_andnot(cpu_default_map, *cpu_map, cpu_isolated_map); - - build_sched_domains(&cpu_default_map); -} - -void arch_destroy_sched_domains(const cpumask_t *cpu_map) -{ -#ifdef CONFIG_NUMA - int i; - int cpu; - - for_each_cpu_mask(cpu, *cpu_map) { - struct sched_group *sched_group_allnodes - = sched_group_allnodes_bycpu[cpu]; - struct sched_group **sched_group_nodes - = sched_group_nodes_bycpu[cpu]; - - if (sched_group_allnodes) { - kfree(sched_group_allnodes); - sched_group_allnodes_bycpu[cpu] = NULL; - } - - if (!sched_group_nodes) - continue; - - for (i = 0; i < MAX_NUMNODES; i++) { - cpumask_t nodemask = node_to_cpumask(i); - struct sched_group *oldsg, *sg = sched_group_nodes[i]; - - cpus_and(nodemask, nodemask, *cpu_map); - if (cpus_empty(nodemask)) - continue; - - if (sg == NULL) - continue; - sg = sg->next; -next_sg: - oldsg = sg; - sg = sg->next; - kfree(oldsg); - if (oldsg != sched_group_nodes[i]) - goto next_sg; - } - kfree(sched_group_nodes); - sched_group_nodes_bycpu[cpu] = NULL; - } -#endif -} -- cgit v1.2.2 From e922efc342d565a38eed3af377ff403f52148864 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 6 Sep 2005 15:18:25 -0700 Subject: [PATCH] remove duplicated sys_open32() code from 64bit archs 64 bit architectures all implement their own compatibility sys_open(), when in fact the difference is simply not forcing the O_LARGEFILE flag. So use the a common function instead. Signed-off-by: Miklos Szeredi Cc: Cc: Christoph Hellwig Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ia64/ia32/ia32_entry.S | 2 +- arch/ia64/ia32/sys_ia32.c | 31 ------------------------------- arch/ppc64/kernel/misc.S | 2 +- arch/ppc64/kernel/sys_ppc32.c | 31 ------------------------------- arch/sparc64/kernel/sys_sparc32.c | 24 +----------------------- arch/x86_64/ia32/ia32entry.S | 2 +- arch/x86_64/ia32/sys_ia32.c | 26 -------------------------- 7 files changed, 4 insertions(+), 114 deletions(-) (limited to 'arch') diff --git a/arch/ia64/ia32/ia32_entry.S b/arch/ia64/ia32/ia32_entry.S index 829a6d80711c..0708edb06cc4 100644 --- a/arch/ia64/ia32/ia32_entry.S +++ b/arch/ia64/ia32/ia32_entry.S @@ -215,7 +215,7 @@ ia32_syscall_table: data8 sys32_fork data8 sys_read data8 sys_write - data8 sys32_open /* 5 */ + data8 compat_sys_open /* 5 */ data8 sys_close data8 sys32_waitpid data8 sys_creat diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c index c1e20d65dd6c..e29a8a55486a 100644 --- a/arch/ia64/ia32/sys_ia32.c +++ b/arch/ia64/ia32/sys_ia32.c @@ -2359,37 +2359,6 @@ sys32_brk (unsigned int brk) return ret; } -/* - * Exactly like fs/open.c:sys_open(), except that it doesn't set the O_LARGEFILE flag. - */ -asmlinkage long -sys32_open (const char __user * filename, int flags, int mode) -{ - char * tmp; - int fd, error; - - tmp = getname(filename); - fd = PTR_ERR(tmp); - if (!IS_ERR(tmp)) { - fd = get_unused_fd(); - if (fd >= 0) { - struct file *f = filp_open(tmp, flags, mode); - error = PTR_ERR(f); - if (IS_ERR(f)) - goto out_error; - fd_install(fd, f); - } -out: - putname(tmp); - } - return fd; - -out_error: - put_unused_fd(fd); - fd = error; - goto out; -} - /* Structure for ia32 emulation on ia64 */ struct epoll_event32 { diff --git a/arch/ppc64/kernel/misc.S b/arch/ppc64/kernel/misc.S index 474df0a862bf..2164bd7b4ef6 100644 --- a/arch/ppc64/kernel/misc.S +++ b/arch/ppc64/kernel/misc.S @@ -957,7 +957,7 @@ _GLOBAL(sys_call_table32) .llong .ppc_fork .llong .sys_read .llong .sys_write - .llong .sys32_open /* 5 */ + .llong .compat_sys_open /* 5 */ .llong .sys_close .llong .sys32_waitpid .llong .sys32_creat diff --git a/arch/ppc64/kernel/sys_ppc32.c b/arch/ppc64/kernel/sys_ppc32.c index 206619080e66..214914a95a50 100644 --- a/arch/ppc64/kernel/sys_ppc32.c +++ b/arch/ppc64/kernel/sys_ppc32.c @@ -867,37 +867,6 @@ off_t ppc32_lseek(unsigned int fd, u32 offset, unsigned int origin) return sys_lseek(fd, (int)offset, origin); } -/* - * This is just a version for 32-bit applications which does - * not force O_LARGEFILE on. - */ -asmlinkage long sys32_open(const char __user * filename, int flags, int mode) -{ - char * tmp; - int fd, error; - - tmp = getname(filename); - fd = PTR_ERR(tmp); - if (!IS_ERR(tmp)) { - fd = get_unused_fd(); - if (fd >= 0) { - struct file * f = filp_open(tmp, flags, mode); - error = PTR_ERR(f); - if (IS_ERR(f)) - goto out_error; - fd_install(fd, f); - } -out: - putname(tmp); - } - return fd; - -out_error: - put_unused_fd(fd); - fd = error; - goto out; -} - /* Note: it is necessary to treat bufsiz as an unsigned int, * with the corresponding cast to a signed int to insure that the * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode) diff --git a/arch/sparc64/kernel/sys_sparc32.c b/arch/sparc64/kernel/sys_sparc32.c index 1d3aa588df8a..7f6239ed2521 100644 --- a/arch/sparc64/kernel/sys_sparc32.c +++ b/arch/sparc64/kernel/sys_sparc32.c @@ -1002,29 +1002,7 @@ asmlinkage long sys32_adjtimex(struct timex32 __user *utp) asmlinkage long sparc32_open(const char __user *filename, int flags, int mode) { - char * tmp; - int fd, error; - - tmp = getname(filename); - fd = PTR_ERR(tmp); - if (!IS_ERR(tmp)) { - fd = get_unused_fd(); - if (fd >= 0) { - struct file * f = filp_open(tmp, flags, mode); - error = PTR_ERR(f); - if (IS_ERR(f)) - goto out_error; - fd_install(fd, f); - } -out: - putname(tmp); - } - return fd; - -out_error: - put_unused_fd(fd); - fd = error; - goto out; + return do_sys_open(filename, flags, mode); } extern unsigned long do_mremap(unsigned long addr, diff --git a/arch/x86_64/ia32/ia32entry.S b/arch/x86_64/ia32/ia32entry.S index c45d6a05b984..f174083d5567 100644 --- a/arch/x86_64/ia32/ia32entry.S +++ b/arch/x86_64/ia32/ia32entry.S @@ -307,7 +307,7 @@ ia32_sys_call_table: .quad stub32_fork .quad sys_read .quad sys_write - .quad sys32_open /* 5 */ + .quad compat_sys_open /* 5 */ .quad sys_close .quad sys32_waitpid .quad sys_creat diff --git a/arch/x86_64/ia32/sys_ia32.c b/arch/x86_64/ia32/sys_ia32.c index be996d1b691e..04d80406ce4f 100644 --- a/arch/x86_64/ia32/sys_ia32.c +++ b/arch/x86_64/ia32/sys_ia32.c @@ -969,32 +969,6 @@ long sys32_kill(int pid, int sig) return sys_kill(pid, sig); } -asmlinkage long sys32_open(const char __user * filename, int flags, int mode) -{ - char * tmp; - int fd, error; - - /* don't force O_LARGEFILE */ - tmp = getname(filename); - fd = PTR_ERR(tmp); - if (!IS_ERR(tmp)) { - fd = get_unused_fd(); - if (fd >= 0) { - struct file *f = filp_open(tmp, flags, mode); - error = PTR_ERR(f); - if (IS_ERR(f)) { - put_unused_fd(fd); - fd = error; - } else { - fsnotify_open(f->f_dentry); - fd_install(fd, f); - } - } - putname(tmp); - } - return fd; -} - extern asmlinkage long sys_timer_create(clockid_t which_clock, struct sigevent __user *timer_event_spec, -- cgit v1.2.2 From 61e032fa2f659fada02ede5087b46963a1c7de34 Mon Sep 17 00:00:00 2001 From: Andrey Panin Date: Tue, 6 Sep 2005 15:18:26 -0700 Subject: [PATCH] dmi: remove uneeded function After elimination of central DMI blacklist dmi_scan_machine() function became a wrapper for dmi_iterate(). This patch moves some code around to kill unneeded function. Signed-off-by: Andrey Panin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/dmi_scan.c | 85 +++++++++++++++++++++------------------------ 1 file changed, 40 insertions(+), 45 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/dmi_scan.c b/arch/i386/kernel/dmi_scan.c index a3cdf894302b..6ae4ef472dbf 100644 --- a/arch/i386/kernel/dmi_scan.c +++ b/arch/i386/kernel/dmi_scan.c @@ -84,49 +84,6 @@ static int __init dmi_checksum(u8 *buf) return sum == 0; } -static int __init dmi_iterate(void (*decode)(struct dmi_header *)) -{ - u8 buf[15]; - char __iomem *p, *q; - - /* - * no iounmap() for that ioremap(); it would be a no-op, but it's - * so early in setup that sucker gets confused into doing what - * it shouldn't if we actually call it. - */ - p = ioremap(0xF0000, 0x10000); - if (p == NULL) - return -1; - - for (q = p; q < p + 0x10000; q += 16) { - memcpy_fromio(buf, q, 15); - if ((memcmp(buf, "_DMI_", 5) == 0) && dmi_checksum(buf)) { - u16 num = (buf[13] << 8) | buf[12]; - u16 len = (buf[7] << 8) | buf[6]; - u32 base = (buf[11] << 24) | (buf[10] << 16) | - (buf[9] << 8) | buf[8]; - - /* - * DMI version 0.0 means that the real version is taken from - * the SMBIOS version, which we don't know at this point. - */ - if (buf[14] != 0) - printk(KERN_INFO "DMI %d.%d present.\n", - buf[14] >> 4, buf[14] & 0xF); - else - printk(KERN_INFO "DMI present.\n"); - - dmi_printk((KERN_INFO "%d structures occupying %d bytes.\n", - num, len)); - dmi_printk((KERN_INFO "DMI table at 0x%08X.\n", base)); - - if (dmi_table(base,len, num, decode) == 0) - return 0; - } - } - return -1; -} - static char *dmi_ident[DMI_STRING_MAX]; /* @@ -190,8 +147,46 @@ static void __init dmi_decode(struct dmi_header *dm) void __init dmi_scan_machine(void) { - if (dmi_iterate(dmi_decode)) - printk(KERN_INFO "DMI not present.\n"); + u8 buf[15]; + char __iomem *p, *q; + + /* + * no iounmap() for that ioremap(); it would be a no-op, but it's + * so early in setup that sucker gets confused into doing what + * it shouldn't if we actually call it. + */ + p = ioremap(0xF0000, 0x10000); + if (p == NULL) + goto out; + + for (q = p; q < p + 0x10000; q += 16) { + memcpy_fromio(buf, q, 15); + if ((memcmp(buf, "_DMI_", 5) == 0) && dmi_checksum(buf)) { + u16 num = (buf[13] << 8) | buf[12]; + u16 len = (buf[7] << 8) | buf[6]; + u32 base = (buf[11] << 24) | (buf[10] << 16) | + (buf[9] << 8) | buf[8]; + + /* + * DMI version 0.0 means that the real version is taken from + * the SMBIOS version, which we don't know at this point. + */ + if (buf[14] != 0) + printk(KERN_INFO "DMI %d.%d present.\n", + buf[14] >> 4, buf[14] & 0xF); + else + printk(KERN_INFO "DMI present.\n"); + + dmi_printk((KERN_INFO "%d structures occupying %d bytes.\n", + num, len)); + dmi_printk((KERN_INFO "DMI table at 0x%08X.\n", base)); + + if (dmi_table(base,len, num, dmi_decode) == 0) + return; + } + } + +out: printk(KERN_INFO "DMI not present.\n"); } -- cgit v1.2.2 From 4e70b9a3d68909ad7e79bf6e1b0dcec6de922a7c Mon Sep 17 00:00:00 2001 From: Andrey Panin Date: Tue, 6 Sep 2005 15:18:28 -0700 Subject: [PATCH] dmi: remove old debugging code DMI debugging code is unused for ages. This patch removes it. Signed-off-by: Andrey Panin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/dmi_scan.c | 21 --------------------- 1 file changed, 21 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/dmi_scan.c b/arch/i386/kernel/dmi_scan.c index 6ae4ef472dbf..ecdaae262755 100644 --- a/arch/i386/kernel/dmi_scan.c +++ b/arch/i386/kernel/dmi_scan.c @@ -12,13 +12,6 @@ struct dmi_header { u16 handle; }; -#undef DMI_DEBUG - -#ifdef DMI_DEBUG -#define dmi_printk(x) printk x -#else -#define dmi_printk(x) -#endif static char * __init dmi_string(struct dmi_header *dm, u8 s) { @@ -117,29 +110,19 @@ static void __init dmi_decode(struct dmi_header *dm) switch(dm->type) { case 0: - dmi_printk(("BIOS Vendor: %s\n", dmi_string(dm, data[4]))); dmi_save_ident(dm, DMI_BIOS_VENDOR, 4); - dmi_printk(("BIOS Version: %s\n", dmi_string(dm, data[5]))); dmi_save_ident(dm, DMI_BIOS_VERSION, 5); - dmi_printk(("BIOS Release: %s\n", dmi_string(dm, data[8]))); dmi_save_ident(dm, DMI_BIOS_DATE, 8); break; case 1: - dmi_printk(("System Vendor: %s\n", dmi_string(dm, data[4]))); dmi_save_ident(dm, DMI_SYS_VENDOR, 4); - dmi_printk(("Product Name: %s\n", dmi_string(dm, data[5]))); dmi_save_ident(dm, DMI_PRODUCT_NAME, 5); - dmi_printk(("Version: %s\n", dmi_string(dm, data[6]))); dmi_save_ident(dm, DMI_PRODUCT_VERSION, 6); - dmi_printk(("Serial Number: %s\n", dmi_string(dm, data[7]))); dmi_save_ident(dm, DMI_PRODUCT_SERIAL, 7); break; case 2: - dmi_printk(("Board Vendor: %s\n", dmi_string(dm, data[4]))); dmi_save_ident(dm, DMI_BOARD_VENDOR, 4); - dmi_printk(("Board Name: %s\n", dmi_string(dm, data[5]))); dmi_save_ident(dm, DMI_BOARD_NAME, 5); - dmi_printk(("Board Version: %s\n", dmi_string(dm, data[6]))); dmi_save_ident(dm, DMI_BOARD_VERSION, 6); break; } @@ -177,10 +160,6 @@ void __init dmi_scan_machine(void) else printk(KERN_INFO "DMI present.\n"); - dmi_printk((KERN_INFO "%d structures occupying %d bytes.\n", - num, len)); - dmi_printk((KERN_INFO "DMI table at 0x%08X.\n", base)); - if (dmi_table(base,len, num, dmi_decode) == 0) return; } -- cgit v1.2.2 From c3c7120d552989be94c9137989be5abb6da8954f Mon Sep 17 00:00:00 2001 From: Andrey Panin Date: Tue, 6 Sep 2005 15:18:28 -0700 Subject: [PATCH] dmi: make dmi_string() behave like strdup() This patch changes dmi_string() function to allocate string copy by itself, to avoid code duplication in the next patch. Signed-off-by: Andrey Panin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/dmi_scan.c | 39 +++++++++++++++++++++++---------------- 1 file changed, 23 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/dmi_scan.c b/arch/i386/kernel/dmi_scan.c index ecdaae262755..ae1a1aed2fc0 100644 --- a/arch/i386/kernel/dmi_scan.c +++ b/arch/i386/kernel/dmi_scan.c @@ -16,15 +16,25 @@ struct dmi_header { static char * __init dmi_string(struct dmi_header *dm, u8 s) { u8 *bp = ((u8 *) dm) + dm->length; + char *str = ""; - if (!s) - return ""; - s--; - while (s > 0 && *bp) { - bp += strlen(bp) + 1; + if (s) { s--; - } - return bp; + while (s > 0 && *bp) { + bp += strlen(bp) + 1; + s--; + } + + if (*bp != 0) { + str = alloc_bootmem(strlen(bp) + 1); + if (str != NULL) + strcpy(str, bp); + else + printk(KERN_ERR "dmi_string: out of memory.\n"); + } + } + + return str; } /* @@ -84,19 +94,16 @@ static char *dmi_ident[DMI_STRING_MAX]; */ static void __init dmi_save_ident(struct dmi_header *dm, int slot, int string) { - char *d = (char*)dm; - char *p = dmi_string(dm, d[string]); + char *p, *d = (char*) dm; - if (p == NULL || *p == 0) - return; if (dmi_ident[slot]) return; - dmi_ident[slot] = alloc_bootmem(strlen(p) + 1); - if(dmi_ident[slot]) - strcpy(dmi_ident[slot], p); - else - printk(KERN_ERR "dmi_save_ident: out of memory.\n"); + p = dmi_string(dm, d[string]); + if (p == NULL) + return; + + dmi_ident[slot] = p; } /* -- cgit v1.2.2 From ebad6a4230bdb5927495e28bc7837f515bf667a7 Mon Sep 17 00:00:00 2001 From: Andrey Panin Date: Tue, 6 Sep 2005 15:18:29 -0700 Subject: [PATCH] dmi: add onboard devices discovery This patch adds onboard devices and IPMI BMC discovery into DMI scan code. Drivers can use dmi_find_device() function to search for devices by type and name. Signed-off-by: Andrey Panin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/dmi_scan.c | 102 ++++++++++++++++++++++++++++++++++++++------ 1 file changed, 90 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/dmi_scan.c b/arch/i386/kernel/dmi_scan.c index ae1a1aed2fc0..c4a73855e38c 100644 --- a/arch/i386/kernel/dmi_scan.c +++ b/arch/i386/kernel/dmi_scan.c @@ -6,13 +6,6 @@ #include -struct dmi_header { - u8 type; - u8 length; - u16 handle; -}; - - static char * __init dmi_string(struct dmi_header *dm, u8 s) { u8 *bp = ((u8 *) dm) + dm->length; @@ -88,6 +81,7 @@ static int __init dmi_checksum(u8 *buf) } static char *dmi_ident[DMI_STRING_MAX]; +static LIST_HEAD(dmi_devices); /* * Save a DMI string @@ -106,6 +100,58 @@ static void __init dmi_save_ident(struct dmi_header *dm, int slot, int string) dmi_ident[slot] = p; } +static void __init dmi_save_devices(struct dmi_header *dm) +{ + int i, count = (dm->length - sizeof(struct dmi_header)) / 2; + struct dmi_device *dev; + + for (i = 0; i < count; i++) { + char *d = ((char *) dm) + (i * 2); + + /* Skip disabled device */ + if ((*d & 0x80) == 0) + continue; + + dev = alloc_bootmem(sizeof(*dev)); + if (!dev) { + printk(KERN_ERR "dmi_save_devices: out of memory.\n"); + break; + } + + dev->type = *d++ & 0x7f; + dev->name = dmi_string(dm, *d); + dev->device_data = NULL; + + list_add(&dev->list, &dmi_devices); + } +} + +static void __init dmi_save_ipmi_device(struct dmi_header *dm) +{ + struct dmi_device *dev; + void * data; + + data = alloc_bootmem(dm->length); + if (data == NULL) { + printk(KERN_ERR "dmi_save_ipmi_device: out of memory.\n"); + return; + } + + memcpy(data, dm, dm->length); + + dev = alloc_bootmem(sizeof(*dev)); + if (!dev) { + printk(KERN_ERR "dmi_save_ipmi_device: out of memory.\n"); + return; + } + + dev->type = DMI_DEV_TYPE_IPMI; + dev->name = "IPMI controller"; + dev->device_data = data; + + list_add(&dev->list, &dmi_devices); +} + /* * Process a DMI table entry. Right now all we care about are the BIOS * and machine entries. For 2.5 we should pull the smbus controller info @@ -113,25 +159,28 @@ static void __init dmi_save_ident(struct dmi_header *dm, int slot, int string) */ static void __init dmi_decode(struct dmi_header *dm) { - u8 *data __attribute__((__unused__)) = (u8 *)dm; - switch(dm->type) { - case 0: + case 0: /* BIOS Information */ dmi_save_ident(dm, DMI_BIOS_VENDOR, 4); dmi_save_ident(dm, DMI_BIOS_VERSION, 5); dmi_save_ident(dm, DMI_BIOS_DATE, 8); break; - case 1: + case 1: /* System Information */ dmi_save_ident(dm, DMI_SYS_VENDOR, 4); dmi_save_ident(dm, DMI_PRODUCT_NAME, 5); dmi_save_ident(dm, DMI_PRODUCT_VERSION, 6); dmi_save_ident(dm, DMI_PRODUCT_SERIAL, 7); break; - case 2: + case 2: /* Base Board Information */ dmi_save_ident(dm, DMI_BOARD_VENDOR, 4); dmi_save_ident(dm, DMI_BOARD_NAME, 5); dmi_save_ident(dm, DMI_BOARD_VERSION, 6); break; + case 10: /* Onboard Devices Information */ + dmi_save_devices(dm); + break; + case 38: /* IPMI Device Information */ + dmi_save_ipmi_device(dm); } } @@ -221,3 +270,32 @@ char *dmi_get_system_info(int field) return dmi_ident[field]; } EXPORT_SYMBOL(dmi_get_system_info); + +/** + * dmi_find_device - find onboard device by type/name + * @type: device type or %DMI_DEV_TYPE_ANY to match all device types + * @desc: device name string or %NULL to match all + * @from: previous device found in search, or %NULL for new search. + * + * Iterates through the list of known onboard devices. If a device is + * found with a matching @vendor and @device, a pointer to its device + * structure is returned. Otherwise, %NULL is returned. + * A new search is initiated by passing %NULL to the @from argument. + * If @from is not %NULL, searches continue from next device. + */ +struct dmi_device * dmi_find_device(int type, const char *name, + struct dmi_device *from) +{ + struct list_head *d, *head = from ? &from->list : &dmi_devices; + + for(d = head->next; d != &dmi_devices; d = d->next) { + struct dmi_device *dev = list_entry(d, struct dmi_device, list); + + if (((type == DMI_DEV_TYPE_ANY) || (dev->type == type)) && + ((name == NULL) || (strcmp(dev->name, name) == 0))) + return dev; + } + + return NULL; +} +EXPORT_SYMBOL(dmi_find_device); -- cgit v1.2.2 From 640e803376b9c4072f69fec42e304c974a631298 Mon Sep 17 00:00:00 2001 From: Robert Love Date: Tue, 6 Sep 2005 15:18:30 -0700 Subject: [PATCH] fix: dmi_check_system Background: 1) dmi_check_system() returns the count of the number of matches. Zero thus means no matches. 2) A match callback can return nonzero to stop the match checking. Bug: The count is incremented after we check for the nonzero return value, so it does not reflect the actual count. We could say this is intended, for some dumb reason, except that it means that a match on the first check returns zero--no matches--if the callback returns nonzero. Attached patch implements the count before calling the callback and thus before potentially short-circuiting. Signed-off-by: Robert Love Cc: Andrey Panin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/dmi_scan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/i386/kernel/dmi_scan.c b/arch/i386/kernel/dmi_scan.c index c4a73855e38c..58516e2ac172 100644 --- a/arch/i386/kernel/dmi_scan.c +++ b/arch/i386/kernel/dmi_scan.c @@ -248,9 +248,9 @@ int dmi_check_system(struct dmi_system_id *list) /* No match */ goto fail; } + count++; if (d->callback && d->callback(d)) break; - count++; fail: d++; } -- cgit v1.2.2 From f96cb1f0580324b95b7219466312a376a59a796f Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Tue, 6 Sep 2005 15:18:31 -0700 Subject: [PATCH] IA64: convert kcalloc to kzalloc This patch converts kcalloc(1, ...) calls to use the new kzalloc() function. Signed-off-by: Pekka Enberg Cc: "Luck, Tony" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ia64/sn/kernel/io_init.c | 2 +- arch/ia64/sn/kernel/tiocx.c | 2 +- arch/ia64/sn/pci/tioca_provider.c | 8 ++++---- 3 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c index 4564ed0b5ff3..906622d9f933 100644 --- a/arch/ia64/sn/kernel/io_init.c +++ b/arch/ia64/sn/kernel/io_init.c @@ -431,7 +431,7 @@ void sn_bus_store_sysdata(struct pci_dev *dev) { struct sysdata_el *element; - element = kcalloc(1, sizeof(struct sysdata_el), GFP_KERNEL); + element = kzalloc(sizeof(struct sysdata_el), GFP_KERNEL); if (!element) { dev_dbg(dev, "%s: out of memory!\n", __FUNCTION__); return; diff --git a/arch/ia64/sn/kernel/tiocx.c b/arch/ia64/sn/kernel/tiocx.c index 254fe15c064b..b45db5133f55 100644 --- a/arch/ia64/sn/kernel/tiocx.c +++ b/arch/ia64/sn/kernel/tiocx.c @@ -191,7 +191,7 @@ cx_device_register(nasid_t nasid, int part_num, int mfg_num, { struct cx_dev *cx_dev; - cx_dev = kcalloc(1, sizeof(struct cx_dev), GFP_KERNEL); + cx_dev = kzalloc(sizeof(struct cx_dev), GFP_KERNEL); DBG("cx_dev= 0x%p\n", cx_dev); if (cx_dev == NULL) return -ENOMEM; diff --git a/arch/ia64/sn/pci/tioca_provider.c b/arch/ia64/sn/pci/tioca_provider.c index ea09c12f0258..19bced34d5f1 100644 --- a/arch/ia64/sn/pci/tioca_provider.c +++ b/arch/ia64/sn/pci/tioca_provider.c @@ -148,7 +148,7 @@ tioca_gart_init(struct tioca_kernel *tioca_kern) tioca_kern->ca_pcigart_entries = tioca_kern->ca_pciap_size / tioca_kern->ca_ap_pagesize; tioca_kern->ca_pcigart_pagemap = - kcalloc(1, tioca_kern->ca_pcigart_entries / 8, GFP_KERNEL); + kzalloc(tioca_kern->ca_pcigart_entries / 8, GFP_KERNEL); if (!tioca_kern->ca_pcigart_pagemap) { free_pages((unsigned long)tioca_kern->ca_gart, get_order(tioca_kern->ca_gart_size)); @@ -392,7 +392,7 @@ tioca_dma_mapped(struct pci_dev *pdev, uint64_t paddr, size_t req_size) * allocate a map struct */ - ca_dmamap = kcalloc(1, sizeof(struct tioca_dmamap), GFP_ATOMIC); + ca_dmamap = kzalloc(sizeof(struct tioca_dmamap), GFP_ATOMIC); if (!ca_dmamap) goto map_return; @@ -600,7 +600,7 @@ tioca_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont * Allocate kernel bus soft and copy from prom. */ - tioca_common = kcalloc(1, sizeof(struct tioca_common), GFP_KERNEL); + tioca_common = kzalloc(sizeof(struct tioca_common), GFP_KERNEL); if (!tioca_common) return NULL; @@ -609,7 +609,7 @@ tioca_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont /* init kernel-private area */ - tioca_kern = kcalloc(1, sizeof(struct tioca_kernel), GFP_KERNEL); + tioca_kern = kzalloc(sizeof(struct tioca_kernel), GFP_KERNEL); if (!tioca_kern) { kfree(tioca_common); return NULL; -- cgit v1.2.2 From 874ca6cd3fb454f4dfafd2bbb6c6893303227c3f Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Tue, 6 Sep 2005 15:18:32 -0700 Subject: [PATCH] PPC64: convert kcalloc to kzalloc This patch converts kcalloc(1, ...) calls to use the new kzalloc() function. Signed-off-by: Pekka Enberg Cc: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc64/kernel/pSeries_reconfig.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ppc64/kernel/pSeries_reconfig.c b/arch/ppc64/kernel/pSeries_reconfig.c index dc2a69d412a2..58c61219d08e 100644 --- a/arch/ppc64/kernel/pSeries_reconfig.c +++ b/arch/ppc64/kernel/pSeries_reconfig.c @@ -111,7 +111,7 @@ static int pSeries_reconfig_add_node(const char *path, struct property *proplist struct device_node *np; int err = -ENOMEM; - np = kcalloc(1, sizeof(*np), GFP_KERNEL); + np = kzalloc(sizeof(*np), GFP_KERNEL); if (!np) goto out_err; -- cgit v1.2.2 From 41b1bce80b43f7c6a6c64006b2abe3a8d52ab120 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Tue, 6 Sep 2005 15:19:05 -0700 Subject: [PATCH] w100fb: Update corgi platform code to match new driver This patch moves the platform specific Sharp SL-C7x0 LCD code from the w100fb driver into a more appropriate place and updates the Corgi code to match the new w100fb driver. It also updates the corgi touchscreen code to match the new simplified interface available from w100fb. Signed-off-by: Richard Purdie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/arm/mach-pxa/Makefile | 2 +- arch/arm/mach-pxa/corgi.c | 35 +--- arch/arm/mach-pxa/corgi_lcd.c | 396 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 398 insertions(+), 35 deletions(-) create mode 100644 arch/arm/mach-pxa/corgi_lcd.c (limited to 'arch') diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index efc2f657184e..33dae99ec2d8 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -11,7 +11,7 @@ obj-$(CONFIG_PXA27x) += pxa27x.o obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o obj-$(CONFIG_ARCH_PXA_IDP) += idp.o -obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o ssp.o +obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o ssp.o obj-$(CONFIG_MACH_POODLE) += poodle.o # Support for blinky lights diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 06ea730e8675..453be2948533 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -39,7 +39,6 @@ #include #include -#include