From 302c0ef7317ddd49c0ae82004cfe308b5a2b6ab3 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Wed, 9 May 2007 11:42:53 +0100 Subject: [ARM] 4364/1: AT91: LEDS on AT91SAM9261-EK Attached you can find a patch needed to make the LEDS for 'CPU-Idle' and 'Timer' work on the AT91SAM9261-EK board. The kernel configuration options are already there, but the implementation is not available. Signed-off-by: Remy Bohmer Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91/Makefile | 1 + arch/arm/mach-at91/board-sam9261ek.c | 3 +++ 2 files changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index a412ae18a421..cd1bc541f28e 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -39,6 +39,7 @@ obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o # LEDs support led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o led-$(CONFIG_MACH_AT91RM9200EK) += leds.o +led-$(CONFIG_MACH_AT91SAM9261EK)+= leds.o led-$(CONFIG_MACH_CSB337) += leds.o led-$(CONFIG_MACH_CSB637) += leds.o led-$(CONFIG_MACH_KB9200) += leds.o diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index bcf71536cc6d..1f0c8a400b3a 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -60,6 +60,9 @@ static void __init ek_map_io(void) /* Initialize processor: 18.432 MHz crystal */ at91sam9261_initialize(18432000); + /* Setup the LEDs */ + at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14); + /* Setup the serial ports and console */ at91_init_serial(&ek_uart_config); } -- cgit v1.2.2