From 027da01d734db0ca9dd1a084339dab07ab576935 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 5 Sep 2005 20:47:53 +0100 Subject: [ARM] 2876/1: N30 - remove task to toggle USB D+ line Patch from Ben Dooks The n30 machine file is using a kernel thread to change the state of the USB D+ pull-up resistor, which is not the proper way to do this. Once the usb-gadget support for the 24xx is merge, the proper access method will be added. This patch also removes the problem of using HZ for the msleep calls, from Nishanth Aravamudan. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/mach-n30.c | 30 ++++++++++-------------------- 1 file changed, 10 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 79044d9bce38..66bf5bb2b3db 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -110,34 +110,24 @@ void __init n30_init_irq(void) s3c24xx_init_irq(); } - -static int n30_usbstart_thread(void *unused) -{ - /* Turn off suspend on both USB ports, and switch the - * selectable USB port to USB device mode. */ - writel(readl(S3C2410_MISCCR) & ~0x00003008, S3C2410_MISCCR); - - /* Turn off the D+ pull up for 3 seconds so that the USB host - * at the other end will do a rescan of the USB bus. */ - s3c2410_gpio_setpin(S3C2410_GPB3, 0); - - msleep_interruptible(3*HZ); - - s3c2410_gpio_setpin(S3C2410_GPB3, 1); - - return 0; -} - +/* GPB3 is the line that controls the pull-up for the USB D+ line */ void __init n30_init(void) { s3c_device_i2c.dev.platform_data = &n30_i2ccfg; - kthread_run(n30_usbstart_thread, NULL, "n30_usbstart"); + /* Turn off suspend on both USB ports, and switch the + * selectable USB port to USB device mode. */ + + s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST | + S3C2410_MISCCR_USBSUSPND0 | + S3C2410_MISCCR_USBSUSPND1, 0x0); } MACHINE_START(N30, "Acer-N30") - /* Maintainer: Christer Weinigel , Ben Dooks */ + /* Maintainer: Christer Weinigel , + Ben Dooks + */ .phys_ram = S3C2410_SDRAM_PA, .phys_io = S3C2410_PA_UART, .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, -- cgit v1.2.2 From 0ce7625f3c1e3f921f6b83f7e944e00031a39dfa Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Mon, 5 Sep 2005 20:49:54 +0100 Subject: [ARM] 2882/1: pxa2xx_sharpsl: Update PCMCIA driver to support variety of new hardware Patch from Richard Purdie This patch updates the PCMCIA pxa2xx_sharpsl driver to support multiple scoop devices by adding a scoop to pcmcia slot mapping structure. It adds platform support for poodle, is known to work on spitz (which is dual slot) and should also support collie with a minor amount of further work. Signed-off-by: Richard Purdie Signed-off-by: Russell King --- arch/arm/common/scoop.c | 6 ++++++ arch/arm/mach-pxa/corgi.c | 12 ++++++++++++ arch/arm/mach-pxa/poodle.c | 12 ++++++++++++ 3 files changed, 30 insertions(+) (limited to 'arch') diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index cfd0d3e550d9..688a595598c8 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -17,6 +17,12 @@ #define SCOOP_REG(d,adr) (*(volatile unsigned short*)(d +(adr))) +/* PCMCIA to Scoop linkage structures for pxa2xx_sharpsl.c + There is no easy way to link multiple scoop devices into one + single entity for the pxa2xx_pcmcia device */ +int scoop_num; +struct scoop_pcmcia_dev *scoop_devs; + struct scoop_dev { void *base; spinlock_t scoop_lock; diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 86b862f56e7e..06ea730e8675 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -60,6 +60,15 @@ static struct scoop_config corgi_scoop_setup = { .io_out = CORGI_SCOOP_IO_OUT, }; +static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = { +{ + .dev = &corgiscoop_device.dev, + .irq = CORGI_IRQ_GPIO_CF_IRQ, + .cd_irq = CORGI_IRQ_GPIO_CF_CD, + .cd_irq_str = "PCMCIA0 CD", +}, +}; + struct platform_device corgiscoop_device = { .name = "sharp-scoop", .id = -1, @@ -241,6 +250,9 @@ static void __init corgi_init(void) pxa_set_udc_info(&udc_info); pxa_set_mci_info(&corgi_mci_platform_data); + scoop_num = 1; + scoop_devs = &corgi_pcmcia_scoop[0]; + platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 0e4f6fab100a..47cfb8bb8318 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -62,6 +62,15 @@ struct platform_device poodle_scoop_device = { .resource = poodle_scoop_resources, }; +static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = { +{ + .dev = &poodle_scoop_device.dev, + .irq = POODLE_IRQ_GPIO_CF_IRQ, + .cd_irq = POODLE_IRQ_GPIO_CF_CD, + .cd_irq_str = "PCMCIA0 CD", +}, +}; + /* LoCoMo device */ static struct resource locomo_resources[] = { @@ -147,6 +156,9 @@ static void __init poodle_init(void) set_pxa_fb_info(&poodle_fb_info); + scoop_num = 1; + scoop_devs = &poodle_pcmcia_scoop[0]; + ret = platform_add_devices(devices, ARRAY_SIZE(devices)); if (ret) { printk(KERN_WARNING "poodle: Unable to register LoCoMo device\n"); -- cgit v1.2.2